transport and installation guide -...
TRANSCRIPT
Transport and Installation Guide
www.pronovia.com
ProNovia Basic Library
Imprint
Legal Notices
Issue January 2016 / A.00.0All rights reserved.
This document is copyrighted and may not be modified without the prior written consent of the publisher.Reproduction and distribution is permitted only with the following legal notice:© 2016 ProNovia AGChanges and updates without notice.Microsoft is a registered trademark of Microsoft Corporation.SAP is registered trademark of SAP AG.ProNovia is a registered trademark of ProNovia AG.
Copyright and Usage Rights
Disclaimer
ProNovia AG assumes no responsibility for any typographical, technical, or other inaccuracies, errors, oromissions and their consequences. Liability in respect of the software described herein, please see oursoftware terms.
Publisher / Contact
ProNovia AGP.O. BoxCH-8180 BülachFon +41 44 860 13 06Fax +41 44 860 13 07Website www.pronovia.comE-Mail info [at] pronovia.com
2
ProNovia AG, P.O. Box, CH-8180 Bülach 3
Table of Content
..............................................................................................4Introduction1
..................................................................................................................................41.1 Other documents
..................................................................................................................................41.2 Prerequisites
..................................................................................................................................41.3 Abbreviations
..................................................................................................................................51.4 Symbols in this document
..............................................................................................6Installation of ProNovia Basic Library2
..................................................................................................................................62.1 Introduction
..................................................................................................................................62.2 Preparations
..............................................................................................7Import3
..................................................................................................................................73.1 Import Steps
..............................................................................................9De-installation4
UTI
Introduction
ProNovia AG, P.O. Box, CH-8180 Bülach4
1 IntroductionThis manual describes the first installation of ProNovia Basic Library on a SAP system.
Further installations of ProNovia Basic Library as well the installation of other ProNovia products canafterwards be made using ProNovia's central product management and is described in detail in theProNovia UTI Customizing manual.
1.1 Other documents
All relevant and available documents are found in the ProNovia Support Center: http://support.pronovia.ch.
1.2 Prerequisites
Prerequisites for using ProNovia products:
· ProNovia products to be used must be installed and setup correctly on the relevant systems.
· ProNovia products must be properly integrated, activated and configured. Details see document ProNoviaBasic Library, Integration and Enhancement Manual.
· To use ProNovia products, valid licenses for each product must be loaded on each system. Details seedocument ProNovia Basic Library, Integration and Enhancement Manual.
· The necessary permissions for the display and maintenance of SAP objects must be present.
1.3 Abbreviations
Some abbreviations used in the ProNovia documents:
Abbreviation Stands for
ADM ProNovia SAP PLM Administrator
AFW ProNovia Application Framework
C5C ProNovia SAP PLM CATIA-V5-Conversion (CENIT)
CHD ProNovia SAP DMS ChangeDoc
DMC ProNovia SAP DocumentManagementClient
ESB ProNovia SAP EasyBrowse
GCP ProNovia SAP PLM ProcessManager Generic CAD Plugin
MMS ProNovia SAP MaterialMasterSupport
MSC ProNovia SAP PLM StructureControl
MSO ProNovia SAP DMS MSOfficeIntegration
OBJ ProNovia Object Services
OLM ProNovia SAP ObjectLifecycleManager
PBL ProNovia SAP PLM PRM DynamicBaseline
PCF ProNovia SAP Client Framework
PCM ProNovia SAP PLM ChangeManager
PLC ProNovia SAP PLM Client
PRM ProNovia SAP PLM ProcessManager
Introduction
UTI
ProNovia AG, P.O. Box, CH-8180 Bülach 5
Abbreviation Stands for
PRL ProNovia SAP PLM ProcessManager LogisticExtension
PBL ProNovia SAP PLM PRM DynamicBaseline
SDF ProNovia SAP DMS FrameWork
UGC ProNovia SAP PLM UG-Conversion (Marenco)
UTI ProNovia Basic Library
More terms are described in the ProNovia SAP PLM Glossar.
1.4 Symbols in this document
In this document following symbols may be used:
Important or critical hint, to pay special attention to.
Additional information.
UTI
Installation of ProNovia Basic Library
ProNovia AG, P.O. Box, CH-8180 Bülach6
2 Installation of ProNovia Basic LibraryThis manual describes the first installation of ProNovia Basic Library on a SAP system.
Further installations of ProNovia Basic Library as well the installation of other ProNovia products canafterwards be made using ProNovia's central product management and is described in detail in theProNovia UTI Customizing manual.
2.1 Introduction
For the installation of ProNovia Basic Library, one or several transport orders will be delivered as ZIP-files.
In this description the syntax R<trspnr>.TPD, or. K<trspnr>.TPD is used for the file name of the SAPtransport. Place holder <trspnr> must be replaced by the correct number of the transport order. Thenumber of the transport or in the Sap system is TPDK<trspnr>.
For example, files can be named "R900149.TPD" and "K900149.TPD", however the correspondingorder number in the SAP system is TPDK900149.
Instead of TPD another file extension may be used. Depending the ProNovia source system, where thepackage was built. For further information please refer to the product download page.
In the examples about the import steps, the training system TPE will be used. Therefore TPE mustalways be replaced by the import system ID.
2.2 Preparations
Files, which are required for the import, must be stored in the following directories of the SAP ERP systems:
R<trspnr>.TPD This file must be moved to the data directory of the transport system.
Example: Unix System /usr/sap/trans/data or Windows F:\usr\sap\trans\data\
K<trspn>r.TPD This file must be moved to the cofiles directory of the transport system.
Example: Unix System /usr/sap/trans/cofiles or Windows F:\usr\sap\trans\cofiles\
The path may be different on your SAP ERP system.
Import
UTI
ProNovia AG, P.O. Box, CH-8180 Bülach 7
3 ImportThe following steps are required to import ProNovia Basic Library on your SAP ERP system.
Dialogs and steps may be different from the examples used, depending on the system settings andrelease stage.
The transport orders must be imported in the order of their transport number.
3.1 Import Steps
· Start of transaction Transport Management System (STMS) and branch to import overview.
· Selection of queue (example TPE) .
· Attachment of transport order via menu Extras Additional transports Add
Number of transport order is generated as described in Introduction 6
UTI
Import
ProNovia AG, P.O. Box, CH-8180 Bülach8
· Selection of the attached transport order and start of import process with Import order.
· Setup of import options "Ignore Invalid Component Version" in the next dialog.
· Confirmation of the dialog and other information.
De-installation
UTI
ProNovia AG, P.O. Box, CH-8180 Bülach 9
4 De-installationThe de-installation of ProNovia products is described in following ProNovia Knowledge Base article::
· http://support.pronovia.ch/index.php?/Knowledgebase/Article/View/2814