transponder bypass model: gmdlbp · installation guide model: gmdlbp gm doorlock alarm &...

Installation Guide

MODEL: GMDLBPGM Doorlock Alarm & Transponder/Passlock Interface

Product Features

- Wire to Wire compatible with any type of remote car starter (W2W).

- Compatible with manufacturer's anti-theft & content theft security systems.

- Maintains integrity of manufacturer's anti-theft immobilizer system.

- No Key Required for operation (NKR).

- Simple 2 step programming.

Product DescriptionData Bus Doorlock Alarm & GM Passkey/Passlock Interface: Lock/Unlock, Driver's Priority Unlock, Trunk/Hatch, OEM Security Arm/Disarm, Door trigger Output (-) & Override the 2nd /3rd generation GM Passkey3 Transponder Immobilizer & Passlock 2 Immobilizer via data bus. NKR-No Key Required. Formerly 6 separate kits required to do what the GMDL-BP can do with one.

combo

DLPK

DOORLOCK & TRANSPONDER BYPASS

Vehicle Compatibility Chart

Wiring Diagram...

Tech Notes................................

...............................................................................................................

..............................................................................................................................

Programming Option Mode...............................................................................................................

........................................................................................................

Tech Tips...........................................................................................................................................

02

03

04

04

04

Warranty........................................................................................................................................... 05

Index

MODEL: GMDLBPRev.: 20091112

© 2008 Directed Electronics. All rights reserved.

Vehicle Compatibility Chart

Vehicle Application Guide

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Alero* 2 2 2 2 2

Ascender 1 1 1

Aurora 2 2 2

Avalanche 4 4 4 4

Bonneville 2 2 2 2 2 2

Bravada 1 1 1

Cadillac CTS 2 2 2 2

Cadillac SRX 2

Cadillac STS/SLS 3 3 3 3 3 3 3 3

Deville 2 2 2 2 2 2 2 2

Envoy 1 1 1 1 1

Escalade 4 4 4

Grand AM* 2 2 2 2 2

H2 Hummer 4 4 4 4

Impala LS** 5 5 5 5 5 5

Le Sabre 2 2 2 2 2 2

Monte Carlo 5 5 5 5 5 5

Park Avenue 3 3 3 3 3 3 3 3

Pickup Sierra 4 4 4 4

Pickup Sierra Classic 4

Pickup Silverado 4 4 4 4

Pickup Silverado Classic 4

Rainier 1 1 1

SRX 2 2

SSR 1 1

Suburban 4 4 4 4

Tahoe 4 4 4 4

Trail Blazer 1 1 1 1 1

Ultra 3 3 3 3 3 3 3 3

Yukon Denali 4 4 4

* OEM factory remote equipped only. If the vehicle is not equipped with an OEM keyless,

the module will not lock/unlock or open the trunk.

** The module will only do the Bypass on this platform.



RE

D (

+)

(+

) 1

2 V

OLT

S C

ON

STA

NT

IN

PU

T

OR

AN

GE

(-)

*P

AN

IC IN

PU

T T

YP

E 1

& 4

, T

RU

NK

IN

PU

T F

OR

TY

PE

2 &

3

BL

UE

(-)

U

NL

OC

K IN

PU

T

VIO

LE

T D

ATA

OU

TP

UT

CO

NN

EC

T T

O V

IOL

ET

DA

TA

WIR

E O

F O

DB

II (

PIN

#2

)

BL

AC

K (

-)

CH

AS

SIS

GR

OU

ND

IN

PU

T(-

)

N

EG

AT

IVE

G

RO

UN

D O

UT

PU

T W

HE

N R

UN

NIN

G (

-)B

RO

WN

(-)

(

RE

MO

TE

STA

RT

IN

STA

LL

AT

ION

S O

NLY

)

Pro

gra

mm

ing

bu

tto

n

PIN

K/W

HIT

E(-

) D

OO

R T

RIG

GE

R O

UT

PU

T

GR

EE

N (

-) L

OC

K IN

PU

T

VIO

LE

T/W

HIT

E S

EE

TE

CH

NO

TE

S O

N P

AG

E 4

PIN

K D

OM

E L

IGH

T IN

PU

T F

RO

M V

EH

ICL

E (

MO

DE

6 D

ET

ER

MIN

ES

IN

PU

T P

OL

AR

ITY

)

NO

TE

:P

INK

and

PIN

K/W

HIT

E w

ires

are

ON

LY u

sed

whe

nin

stal

ling

a re

mot

e st

arte

r al

arm

com

bina

tion

syst

em

REMOTE

STARTER

IMP

OR

TA

NT

: D

O N

OT

CO

NN

EC

T V

IOL

ET

D

ATA

OU

TP

UT

WIR

E O

F IN

TE

RFA

CE

MO

DU

LE

TO

VE

HIC

LE

DA

TA W

IRE

(P

IN 2

) U

NT

IL E

VE

RY

O

TH

ER

WIR

E H

AS

BE

EN

CO

NN

EC

TE

D &

TH

EH

AR

NE

SS

HA

S B

EE

N P

LU

GG

ED

INT

O T

HE

IN

TE

RFA

CE

(D

L)

MO

DU

LE

.

GM

DL

BP

is

de

sig

ne

d t

o o

pe

rate

on

an

y o

ne

of

5 p

os

sib

le v

eh

icle

pla

tfo

rm t

yp

es

. O

nc

e t

he

GM

DL

BP

ha

s b

ee

n s

uc

ce

ss

fully

co

nn

ec

ted

, th

e n

ex

t s

tep

is

to

pro

gra

m t

he

GM

DL

BP

to

op

era

te o

n t

he

ap

pro

pri

ate

Ve

hic

le P

latf

orm

Ty

pe

. S

ee

Ve

hic

le C

om

pa

tib

ilit

y C

ha

rt o

n p

ag

e 2

.

* If y

ou

se

lect

typ

e 1

or

4, a

pp

lyin

g a

gro

un

d p

uls

e to

th

is w

ire

will

tu

rn o

n th

e p

an

ic m

od

e. To

tu

rn it

off, se

nd

an

oth

er

pu

lse

to

th

is w

ire

. H

ow

eve

r, if

yo

u s

ele

ct typ

e 2

or

3, a

pp

lyin

g a

g

rou

nd

pu

lse

will

op

en

th

e tru

nk.

*Se

e V

eh

icle

Co

mp

ati

bilit

y C

ha

rt o

n p

ag

e 2

.

DE

FA

ULT

VE

HIC

LE

PLA

TFO

RM

SE

TT

ING

IS

TY

PE

1 I

F T

HIS

IS

TH

E V

EH

ICLE

PLA

TFO

RM

RE

QU

IRE

D S

KIP

TO

“S

TE

P 2

”.

1)

To

ch

an

ge

th

e V

eh

icle

Pla

tfo

rm S

ett

ing

, p

res

s a

nd

re

lea

se

th

e p

rog

ram

bu

tto

n u

nti

l th

e L

ED

fla

sh

ra

te is

th

e s

am

e a

s t

he

TY

PE

of

ve

hic

le r

eq

uir

ed

. T

he

nu

mb

er

of

fla

sh

es

fro

m t

he

LE

D c

on

firm

s t

he

Ve

hic

le P

latf

orm

Ty

pe

th

at

ha

s b

ee

n s

ele

cte

d. E

x:

1 f

las

h =

TY

PE

1, 2

fla

sh

es

= T

YP

E 2

, a

nd

so

on

...

EX

: If

TY

PE

4 is

re

qu

ire

d:

Ple

as

e n

ote

th

e m

od

ule

is

alr

ea

dy

in

Ve

hic

le P

latf

orm

TY

PE

1. P

res

s t

he

pro

gra

mm

ing

bu

tto

n t

o a

dv

an

ce

to

th

e n

ex

t T

YP

E s

ele

cti

on

(3

X

tim

es

in

to

tal)

. T

he

LE

D w

ill th

en

fla

sh

4 t

ime

s t

o c

on

firm

TY

PE

4 s

ele

cti

on

.

2)

On

ce

Ve

hic

le P

latf

orm

Ty

pe

ha

s b

ee

n s

ele

cte

d, p

res

s &

ho

ld p

rog

ram

bu

tto

n u

nti

l L

ED

blin

ks

on

ce

to

co

nfi

rm s

ett

ing

is

sa

ve

d &

re

ad

y t

o p

rog

ram

to

ve

hic

le.

3)

Re

lea

se

pro

gra

mm

ing

bu

tto

n a

nd

th

e L

ED

will c

om

e O

N s

olid

.

4)

Sta

rt t

he

ve

hic

le w

ith

th

e ig

nit

ion

ke

y:

Th

e L

ED

will tu

rn o

ff c

on

firm

ing

th

e G

MD

LB

P is

pro

gra

mm

ed

to

th

e v

eh

icle

.



***VIOLET/WHITE (-) remote starting vehicle.

****ORANGE (-) In a Type 1 & 4 installation the orange wire can be used to activate the vehicles panic mode as long as the remote system has a dedicated panic output. A horn output is not suitable since it is also used to provide confirmation chirps, etc...Which will result in triggering the panic function.

Connect this wire to disarm wire from remote car starter ONLY if the OEM alarm sounds once when

**BROWN (-) For reliable conversion of analog to digital, all (-) input wires require a solid ground to activate each command function. Relays are not required except in cases in which the output(s) ground signal is insufficient. (Example: transistor +/- doorlock outputs)

ONLY MODE 1, 6 AND 7 ARE AVAILABLE

OPTION PROGRAMMING CHART

Mode Selection Option Programming *Default Value

Mode1:Doorlock output *Option 1: 1st PULSE: Driver Priority Function2nd PULSE: Unlock all doors

Option 2: 1st PULSE: Unlock all doors

Mode6:Domelight polarity *Option 1: Positive(+) Polarity Option 2: Negative(-) Polarity

Mode7:Reset Mode *Option 1: Reset to Default Values

IMPORTANT: The GMDLBP will detect all door triggers through the data line for TYPE 2 and TYPE 3 vehicles only. In TYPE 1 and TYPE 4, only the front doors will be detected. You will need to get a signal from the rear doors (- or +) and connect those wires to the pink one. You also need to select the polarity of the rear doors in Mode 6. When the interface kit detects an open door thru the data line, it will send a (-) negative trigger on the PINK/WHITE:[door trigger output (-)] wire.

If the module is not resetting, turn the key to the ON position and start the vehicle. This will turn on the BCM. Once the reset is complete, you will be able to select the platform you need (1 to 5).

OPTION PROGRAMMING

Programming Option Mode

Tech Notes

Tech Tips

1-Press and hold the Programming button for 2 seconds. The LED will flash for approximately 3 seconds, PAUSE, then flash once more to indicate entry into MODE1 (DOORLOCK SELECTION).

2-To advance to next MODE, press the Programming button again. The LED will flash to confirm what MODE you are in. Ex: 1 flash = MODE 1, 2 flashes = MODE 2, and so on...

3-Once you have entered the required MODE: you may then change your options. Advance the OPTION by pressing the LOCK or UNLOCK button from your aftermarket transmitter.

4-The vehicle will chirp once (1X) or twice (2X) to indicate option level.

5-To exit the OPTION PROGRAMMING: Press and hold the program button until the LED flashes once (1X).

6-To return or change another OPTION, go to step 1.

Before programming the module, start the vehicle once and let it run for a few seconds, then turn the engine off.



For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.

This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.920-0007 07-06

PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *;6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN. PATENT: 2,320,248; 2,414,991; 2 , 4 1 5 , 0 1 1 ; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089 EUROPEAN PATENT:1,053,128 PAT. PENDING: 2,291,306; MADE IN CANADA

This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.

Limited One-Year Consumer Warranty



transponder bypass model: gmdlbp · installation guide model: gmdlbp gm doorlock alarm &...

Documents