training catalogue 2010 - mawea · master exercise importing the part ... catia tooling design...
TRANSCRIPT
Contents
2015
30D, Jalan PJS 1/46, Petaling Utama, Petaling
Jaya, 46000 Selangor Darul Ehsan
Tel: +603-7783 3459 | Fax: +603-7781 6818
Email : [email protected]
Website : www.mawea.com.my
Mechanical@CATIA
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
Contents
Course Subject Code
Duration (day)
2.1.3 Mechanical@CATIA
3D Functional Tolerancing & Annotation CAT-B01 2
Functional Molded Part CAT-B02 2
Core & Cavity CAT-B03 1
Mold & Tooling Design CAT-B04 2
Generative Sheetmetal Design CAT-B05 1
Surface Repair CAT-B06 2
Tooling Design CAT-B07 2
Composites Part Engineering CAT-B08 3
Composites Part Manufacturing CAT-B09 2
Composite Grid Design CAT-B10 2
Jigs & Fixture Design CAT-B11 3
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – 3D FUNCTIONAL TOLERANCING AND ANNOTATION
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.)
-----------------------------------------------------------------------------------------------------------------------------------
Introduction
This course will teach you how to annotate a 3D part. You will learn how to create annotation planes and how to add and manage 3D annotations on these planes. You will also learn how to create 3D views and use them to create 2D drawing
views.
Objective
Upon Completion of this course you will be able to:
Add 3D annotations to a part
Manage and position these annotations
Create and manage annotation planes and views
Manage the 3D geometry associated to the 3D annotations
Contents
Introduction to FT&A
The Tolerancing Advisor
Creating & Managing FTA Annotations
Geometry for 3D Annotations
Advanced Functions
The User Settings
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5: FUNCTIONAL MOLDED PART FUNDAMENTAL
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.)
-----------------------------------------------------------------------------------------------------------------------------------
Introduction
This course will teach you how to use the Functional Molded Part workbench to create molded parts from the main shapes definition and to finalize the part with additional dress up features. You will also be taught the multi-body approach and will finally learn how to extract cores and cavity from the final part.
Objective
Upon Completion of this course you will be able to:
Define the main shapes of a molded part as added or removed material
Add functional features such as ribs or cutouts to the part
Finalize the molded part using the feature modifiers such as fillets or patterns
Use the multi-body approach
Extract cores and cavities from the final part
Contents
Introduction to Mold Design
Shape Features
Mold Design properties
Functional Features
Feature Modifiers
Dress up Features
Functional Extration
Design Process
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
2nd
day
Creating a Parting Line
Creating a Parting Surface
Functionalities Dedicated to Stamping
Comparing Two Parts
CATIA V5 CORE & CAVITY DESIGN
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.)
----------------------------------------------------------------------------------------------------------------------------------- Introduction In this course, you will you will discover CATIA V5 Core & Cavity Design user interface and you will review the general process to create the parting surfaces required for the design of a mold. The scope of Core & Cavity Design workbench is to provide the mold designer with all the necessary functions to create the surfaces (Core, Cavity, Moving elements) required to create his mold tool. Objective
- Import the part to a mold
- Define the main pulling direction
- Update mold areas by transferring, splitting and segregating faces
- Create a parting surface
- Use functionalities dedicated to stamping
- Perform a geometric comparison of two parts
Contents
1st day
Introduction to Core and Cavity Design
Master Exercise
Importing the Part to Mold
Defining the Main Pulling Direction
Defining a Slider/Lifter Direction
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – MOLD TOOLING DESIGN
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 1Day (9.00 a.m. to 5.00 p.m.)
-----------------------------------------------------------------------------------------------------------------------------------
Introduction
This course will teach you how to design an injection mold and its components using standard and user defined catalogs.
You will learn the design process with the help of industrial examples.
Objectives
Upon completion of this course you will be able to:
Create a mold base using guided and fixed components
Build a Plastic Injection Mold assembly from scratch
Contents
Introduction to Mold Tooling Design Creating a New Mold Editing the Mold Base Working with Mold Components Mold Design to Manufacturing Creating Injection Features Additional Information
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – GENERATIVE SHEETMETAL DESIGN
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.)
----------------------------------------------------------------------------------------------------------------------------------- Introduction In this course you will be exposing the concept of sheet metal design such as the bend allowance, the K-factor and the bend radius rule. You also will learn the implementation of sheet metal by using CATIA Sheet Metal where you will learn all the features involve in creating your fabricated parts. Objective
Understand the terminology and the creation process for sheet metal part design
Define and manage sheet metal part parameters
Design walls, bends and flanges
Add features such as cutouts, holes, corners and chamfers
Create standard and user defined stamped features
Manage folded and unfolded views and export a finished flat pattern
Contents
Getting Started
Introduction to Sheet Metal Design
Generative Sheet Metal Design Overview
Defining Sheet Metal Parameters
Recommendations for Getting Started
Sheet Metal Features
Cutouts
Holes
Corners and Chamfers
Standard Stamps
User-Defined Stamps
Recommendations for Sheet Metal Features
Sheet Metal Walls
What is a Sheet Metal Wall?
Defining the First Wall
Secondary Walls
Part Recognition
Recommendations for Sheet Metal Walls
Transformations and Duplication
Transformation of Parts
Patterns
Mirror
PowerCopies
Recommendations for Duplication
Bends and Unfolded Mode
Bends
Unfolded Mode
Corner Relief
Recommendations for Bends
Mapping and Output
Point or Curve Mapping
Output
Flanges
Creating Flanges
Recommendations for Flanges
Advanced Topics in Sheet Metal
Sheet Metal Standard Files
Multi-Body Methodology
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – SURFACE REPAIR
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 1 Day (9.00 a.m. to 5.00 p.m.)
----------------------------------------------------------------------------------------------------------------------------------- Introduction Surface Repairing provides users a fixing tools to heal parts to be used in downstream applications such as manufacturing, analysis or tooling design. This product enable to helps user checking validity of imported data (surfaces or solids) with regard to V5 modeling criteria, and subsequently correcting or improving the topology and the geometry. Objective
Do Surface Analysis and Repair the imported data
Perform advanced surfaces analysis and gap correction
Join the imported data
Solidify the closed surface
Understand the mechanism of a multi-model environment including the use of surfaces
Contents
Introduction to surface repairing
Quality checking and correction techniques
Surface manipulation and operation
Surface healing and merging
Model Analysis
Closing Join Surface
Master Exercise
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – TOOLING DESIGN
Venue : MAWEA TRAINING CENTRE
Date : TBC
Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.) ----------------------------------------------------------------------------------------------------------------------------------- Introduction CATIA Tooling Design teaches you how to create the die and mold components using Mold Tool Design workbench. You will learn how to instantiate the components in a die or mold structure. Contents Introduction to Tooling Design
- Accessing the Workbenceh - Tooling Design Functions - Tooling Design Catalogs - Specific Tooling Design Settings
Creating Components
- Selecting a Component - Instantiating a Component - Creating a Component using a Knowledgeware Rule
Editing Components
- Editing the Definition of a Component - Splitting a Component - Deleting a Component - Activating / Deactivating a Component - Isolating an Existing Component - Replace an Existing Component
Specific Components : Inserts & Sliders
- Defining & Positioning Insert and Slider - Defining & Positioning Retainers and Angle Pin - Instantiating Screws in the Retainers
Advanced Add / Remove Capabilities
- Assembly Drillings - Extended Definitions
Managing User Components
- Structure of a User Component - Creating a Catalog of User Components - Instantiating a User Component
Tool Design to Manufacturing
- Tooling Component Drilling - Technological Results vs. Explode Holes
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – COMPOSITES PART ENGINEERING
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 3 Days (9.00 a.m. to 5.00 p.m.)
----------------------------------------------------------------------------------------------------------------------------------- Introduction This course will teach you how to build composite parts in the context of the engineering design process, from Preliminary Design to Engineering Detail Design. Objective
Define the Composites parameters.
Create a preliminary design for composites parts using the Zone approach and the Solid approach.
Generate Composites parts from Preliminary design to Engineering detail design. Contents
CPE Workbench Presentation
Preliminary Design 1 (Composite catalog, laminate parameters, zone
based design, zones parameters, transition Zones, etc.)
Preliminary Design 2 (Connection Generator, Imposed Thickness
Point, ITP height, Import laminate etc.)
Engineering Detail Design 1 (Stack-up and plies creation from zones, slicing
group, limit contour etc.)
Engineering Detail Design 2 (Plies group, manual plies creation, core, ply
exploder, 3D section etc.)
Engineering Detail Design 3 (Numerical analysis, core sample, symmetry
creation, ply table and import etc)
Engineering Detail Design 4 (Edge of part, solid from plies, 3D Multisplice
creation, butt splice-no splice, inspection tools, darts etc.)
Engineering Detail Design 5 (Mirrored part, drawing, 3D annotations, ply
export, ply-book, V4-V5 Composites Interoperability)
DMU Composites Review
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – COMPOSITES PART MANUFACTURING
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.)
----------------------------------------------------------------------------------------------------------------------------------- Introduction This course will teach you how to build composite parts for manufacturing detail design. Objectives Upon completion of this course you will be able to:
Understand the significance of the Manufacturing
Data creation process in Composites design
Generate the Manufacturing data structure from the Engineering data structure
Modify the Manufacturing data structure
Synchronize the link between the Manufacturing and the Engineering part Contents
- CPM Workbench Presentation - Composites Catalog - Laminate Parameters - Manufacturing Data Structure - Manufacturing Surface Swapping - Plies Group - Manual Plies Creation - Core - Edge Of Part - Material Excess - Multi Splice Creation - Ply Table - Numerical Analysis - Managing the Parts - Productbility Analysis - Inspection Tool - Darts - Flattening - Geometry transfer - Ply Exploder - Synchronization - Export - Ply Book - Miscellaneous
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – COMPOSITE GRID DESIGN
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.)
----------------------------------------------------------------------------------------------------------------------------------- Introduction This course will introduce you to the Grid approach. You will generate plies, modify geometry, and create a solid or a top surface using the ply geometry. By the end of this course you will be able to create and modify a composite part using the Composites Grid Design approach. Objectives Upon completion of this course you will be able to:
Understand the concept of grid approach in Composites Design
Generate plies using the Grid approach
Modify the ply geometry
Create a solid or a top surface using the ply geometry
Create and modify a composite part using the Composites Grid Design approach Contents
Introduction to Composites Grid Design Plies Creation using the Composites Grid Approach Modifying the Ply Geometry Solid Creation from Ply Geometry
----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)
30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.
Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]
www.mawea.com.my
CATIA V5 TRAINING – JIG AND FIXTURE DESIGN
Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)
Date : TBC
Duration/Time : 3 Days (9.00 a.m. to 5.00 p.m.)
----------------------------------------------------------------------------------------------------------------------------------- Introduction CATIA V5 Jig & Fixture Design is a course compiled specifically for the Jig & Fixture application. Throughout the course you will learn on how to create jig and fixture components, how to assemble the components, clearance checking and drawing creation. You will also learn on how to create knowledge templates for your repetitive tasks. Objective
Able to design, assemble and generate drawing for Jig & Fixture application.
Able to create some templates for repeat task.
Contents
Introduction to Jig & Fixture
Fixture Design. 3D part fixture modeling Fixture Assembly Clearance Checking & Editing Fixture Drawing
Jig Design 3D part jig modeling Jig Assembly Clearance Checking & Editing Jig Drawing
Introduction to Knowledgeware Parameters Formula Design Table Power Copy & User Defined Feature