Trade Show SpecialIFSEC South Africa 2012

k 2 and 4 channel 433 Mhz remote control, compatible with the MITTO series.

k New styling, elegant and compact, 12V power supply.

k Highly secure transmission protocol, recess-mounted push-buttons to avoid unintentional and accidental pressing.

k 2 and 4 channel 433 Mhz remote control, compatible with the MITTO series.

k New styling, elegant and compact, 12V power supply.

k Highly secure transmission protocol, recess-mounted push-buttons to avoid unintentional and accidental pressing.

k Premium surface finishes with soft touch treatment to ensure the greatest comfort and a perfect grip.

kMitto B Rcb / Remote control

RESIDENTIAL, INDUSTRIAL, LIGHT COMMERCIAL AND COMMERCIAL USE

kKleio B Rca / Remote control

RESIDENTIAL, INDUSTRIAL, LIGHT COMMERCIAL AND COMMERCIAL USE

The contents of this catalogue (images, technical descriptions, illustrations) are the exclusive property of Bft s.p.a.

Reproduction in any form and on any medium is forbidden. Copyright 2012. All rights reserved.

The data in this publication are to be considered as indicative. Bft reserves the right to make any changes without prior notice.

Linear electromechanical operator for swinging gates

k Electromechanical operator for residential use, 24 V for leaves up to 5 m (250 kg).

k Magnetic limit switches and D-Track torque control system.

k Total useful travel 470 mm, opening time 20 sec.

kPhobos nl bt

RESIDENTIAL USE

Operator for sliding gates up to 1500 kg

k 24V slide gate operators for very intensive use; extremely simple to install and totally safe to use, thanks to their full compliance with current European standards.The D-Track torque control system combined with the virtual encoder guarantee maximum precision in the control of the gate movement and the detection of obstacles.

k Electromechanical spring-loaded or inductive limit switches (Prox.) and electronic slowdown system.

k Control unit (Hqsc-d) with D-Track torque control system and built-in receiver.

kAres 1500

k Compact and sturdy, for the automation of swing gate leaves up to 5 metres wide and weighing up to 800 kg. Maximum obstruction detection safety guaranteed by the absolute encoder and exclusive D-Track system.

k Thanks to the exclusive selectable locking system, all operators can be switched to reversible, with locking when open, locking when closed or double locking.This can all be done by simply turning a key.

kLux G bt Range of hydraulic operators for swing gates

INDUSTRIAL, CONDOMINIUM AND COMMERCIAL USE

Electromechanical articulated arm operator for swinging gates

k 24V electromechanical articulated arm operator, for residential use; for leaves up to 2 m (200 kg)

k Operator with incorporated control unit with built-in radio receiver; electric limit switches and built-in mechanical stops; anti-crushing system managed via control panel.

k Opening angle up to 120° (90° in 14 sec).

kVirgo

RESIDENTIAL USE

INDUSTRIAL, LIGHT COMMERCIAL AND COMMERCIAL USE

Operator for sliding gates up to 2000 kg

k 230V slide gate operators for very intensive use, extremely sturdy and high-performance. The control unit with its exclusive torque control system gives complete control over safety, in total conformity with binding European standards.

k Electromechanical spring-loaded or inductive limit switches (Prox.) and electronic slowdown system.

k Control unit (Leo d ma) with D-Track torque control system and encoder and built-in receiver.

kIcaro

INDUSTRIAL AND COMMERCIAL USE

Operator for sliding gates of up to 500 kg

k Electromechanical 24 V operator for residential use for gates up to 500 kg, spring electromechanical limit switches and electronic braking system. k Control unit (Hqsc-d) with built-in receiver and obstacle detection safety system based on D-track technology. k Proximity limit switches for accurate, safe installations in any environmental conditions (option).

kDeimos bt

RESIDENTIAL USE

k Irreversible electromechanical operator for sectional doors of maximum surface area 45 m2. The absolute encoder guarantees maximum stopping precision and is able to manage two supplementary limit switches (dead man version). Available in 230V single phase or 400V three-phase power supply versions.

k Management system for stop and intermediate limit switches based on absolute encoder technology with settable zero position. Control unit with deadman feature on-board operator.

k New control panel LEO B CBB.

kPegaso B Cja

INDUSTRIAL USE

Operator for sectional industrial doors

k Complete range of automation systems for sliding pedestrian doors with leaves up to a maximum weight of 150 kg.

k Control unit with programming display and autoset system for movement and torque parameters

k Vista SL: for leaves up to 150 kg, speed up to 0.9 m/s (1 leaf) and 1.8 m/s (2 leaves).

k Available in Vista SL C compact version: crossbar with section of 80 mm (H) X 180 mm (D), to enable installation even in very confined spaces. Leaves up to 100 kg, leaf speed up to 0.8 m/s (1 leaf) and 1.6 m/s (2 leaves).

k Simple and fast to install, thanks to the exclusive WMP fast assembly profile.

kVista Sl - Vista Slc

LIGHT COMMERCIAL AND COMMERCIAL USE

Automation system for automatic pedestrian doors

Electromechanical operator for sectional garage doors

k Exclusive encoder position reset knob for fast, safe installations.

kLimit switch based on absolute encoder technology, guaranteeing maximum reliability and stopping precision.

kControl unit with on-board programming display and D-Track torque, speed and position management and control system. Incorporated dual channel radio receiver.

kArgo

INDUSTRIAL USE

Electromechanical automatic rising bollards

k Complete range of automatic rising bollards for the protection and safety of any area requiring controlled access.Ideal for settings of particular architectural interest, guaranteeing maximum reliability over time and requiring very little maintenance.

k Possibility of release and automatic lowering in the event of a power failure.

k Cylinder height 500 or 700 mm.

kStoppy

LIGHT COMMERCIAL AND INDUSTRIAL USE

k Highly customisable and versatile: PILLAR rising bollards can be customised with a range of accessories to adapt the operators to the needs of each individual installation. Furthemore PLR CASE foundation boxes pre-adapt the site for the installation of the bollards and make inspection and/or maintenance jobs safe, simple and practical.

k Built-in hydraulic unit: the hydraulic assembly is built in to the operator, making the unit much more compact and easier to install. No trenching is required for hydraulic hose routing and there is no risk of pressure loss between hydraulic unit and operator.

k Cylinder height 600 or 800 mm.

kPillar Hydraulic automatic rising bollards

LIGHT COMMERCIAL, COMMERCIAL AND INDUSTRIAL USE

Electromechanical barriers for very intensive use

k Range of barriers for intensive use, for of up to 8 metres.The wide range of accessories, the built-in flashing light and the fittings for photocells make them ideal in all contexts.

k Control unit with programming display and built-in dual channel radio receiver fitted into the top of the case for easier access.

k Limit switch system with electronic adjustment that speeds up installation and ensures maximum precision in movement.

k Backup battery power supply system, installable on-board unit.

k Range of barriers for intensive use, for clear openings of up to 5 metres.

k Control unit with programming display and built-in dual channel radio receiver fitted into the top of the case for easier access.

k Scenario programming: the LIBRA CG/CGS control panels enable extremely rapid end precise installation. With just a few selections made on the display it is possible to programme the control panel completely, saving time and ensuring the best result.

k Available in 24V versions, they ensure the utmost safety and reverse the movement if an obstacle is detected.

kMichelangelo

kGiotto Electromechanical barrier for intensive use

LIGHT COMMERCIAL, COMMERCIAL AND INDUSTRIAL USE

INDUSTRIAL, LIGHT COMMERCIAL AND COMMERCIAL USE

kEconomy and quality. Born out of careful market research, thorough design techniques and detailed craftsmanship, we have created a simple deterrent bollard which both responds to customer needs and incorporates the qualities that have always distinguished our products.EASY Ø115-500 extends a Ø115mm diameter bollard up to 500mm with a reflective strip to improve visibility.

H: 50 mm reflective strip on stem painted RAL 7022 grey colour.

kEasy 115-500 Easy standard automatic bollard Easy ø 115/500

LIGHT COMMERCIAL, COMMERCIAL AND INDUSTRIAL USE

k Hands-free control device, also compatible with non-Bft systems. Very fast installation, 24V power supply.

k Antennas available in one- or two-way versions.

k Tuva is a passive UHF tag reading system. The antenna TUVA is integrated onto a post at each entry – exit station: when a vehicle approaches and a valid code is read the entry/exit transit is authorized. The authorized vehi-cles will place sticker tags on the windshield, in order to enter and to exit from the car park in a fast way without having to stop at the columns.

kPassy kTuva Antenna Hands-free control system Car Tag Reader

kT-box kEcb verticale Digital keypad 12-24V Electric locks

k433 Mhz rolling code wireless digital keypad. Controls 10 channels and manages up to 100 codes at a range of up to 140 m. Touch-sensitive backlit keypad.

k Vertical solenoid lock, 12-24V

RESIDENTIAL, INDUSTRIAL, LIGHT COMMERCIAL AND COMMERCIAL USE RESIDENTIAL, INDUSTRIAL, LIGHT COMMERCIAL AND COMMERCIAL USE

Solar energy system

k Ecosol is a complete solar energy system for low voltage (24V) installations. Ecosol is ideal for gate and door automation systems that cannot be connected to the regular power grid but through trenching and extensive masonry work. Ecosol is fully compatible with all 24V Bft products, whether new or retrofit installations.

ADVANTAGESk Reduced installation time and costs thanks to a quick and simple wiring. As a matter of

fact there is no need for connection to the electrical power grid, meaning, the installer has the freedom not to dig trenches for the conduits and execute time consuming masonry.k The automation system is fully functional using just solar energy, enabling the end user to

save electricity and setting utility costs at zero.k Full compatibility with all low voltage (24V) Bft products, whether new or previously installed.

kEcosol

2 34

1

1. ECOSOL PANEL2. ECOSOL BOX3. CONTROL UNIT4. OPERATOR

ECOSOL BOXInterface for 24V control units featuring two 7.2 Ah batteries and a built-in Clonix receiver. The ECOSOL BOX comes equipped with handles in order to make it easy to charge batteries on the electrical grid using the ECOSOL CHARGER (optional).The ECOSOL BOX can even be supplemented with ECOSOL DOUBLE in order to increase capacity.

DTS Security Products – East RandHead Office

7 Belgrade AveSpartan X2Tel: 011 392 5540 / 024 0111Fax: 011 392 2182Email: ho@dtssecurity.co.za

DTS Security Products – AlbertonUnit 45 Joanique Eco Park186 – 2nd AveVerwoerdparkTel: 011 907 8846Fax: 011 869 6299Email: alberton@dtssecurity.co.za

DTS Security Products - Pretoria2 Calliandra PlaceCnr Calliandra & Taaifontein StsMontana Park X57Tel: 012 548 2336Fax: 012 548 2399Email: pretoria@dtssecurity.co.za

DTS Security Products – Kwazulu NatalTel: 071 353 6532Email: natal@dtssecurity.co.za

k www.bft.it