trade price list – 2019 -...
TRANSCRIPT
Trade Price List – 2019
All prices excluding GSTPage 2 All prices excluding GSTPage 2 All prices excluding GSTPage 2
Trade Price List
Head office and National Distribution Centre
Reliance Worldwide Corporation (Aust) Pty. Ltd.
Address: 27-28 Chapman Place Eagle Farm QLD 4009 Australia
Phone: 1800 777 299
Fax: 1800 065 321
Web: www.TubeFit.com.au
Reliance Worldwide Corporation (Aust) Pty. Ltd. ABN 71 004 784 301
Contact Information
All prices excluding GST Page 3All prices excluding GST Page 3
Effective 1st March, 2015, all orders that total less than $250 (excluding GST) will attract a freight charge of $10.00 + GST.
All orders in excess of $250 (excluding GST) will be sent FIS standard road freight.
Freight Policy
No party should rely upon the contents of this publication as to the fitness of any particular product for any particular use or application. Goods are offered with the benefit of the manufacturers warranty but Reliance Worldwide Corporation (Aust.) Pty. Ltd. shall not be liable for any loss or damage either direct or consequential arising out of any defects.
Subject to any statutory obligation, Reliance Worldwide Corporation (Aust.) Pty. Ltd. may at its election:
1. Replace any product found by Reliance Worldwide Corporation (Aust.) Pty. Ltd. to be defective within twelve months of sale or supply equivalent product;
2. Pay the cost of replacing any such defective product; or
3. Repair any such defective product or pay the cost of repairs.
All goods are sold on Reliance Worldwide Corporation (Aust.) Pty. Ltd. General Conditions of Sale as attached and as may be modified from time to time prior to any particular sale.
Reliance Worldwide Corporation (Aust.) Pty. Ltd. reserves the right to change pricing, modify designs and specifications and to withdraw and introduce products.
© 2019 All rights reserved
No part of this publication may be reproduced, copied or transmitted in any form by any means graphic, electronic or mechanical (including photo-copying, recording, taping or by any information storage and retrieval system) without prior permission in writing of the publisher Reliance Worldwide Corporation (Aust.) Pty. Ltd.
Terms and Conditions
Head office and National Distribution Centre
Reliance Worldwide Corporation (Aust) Pty. Ltd. ABN 71 004 784 301
Address: 27-28 Chapman Place Eagle Farm QLD 4009 Australia
Phone: 1800 777 299
Fax: 1800 065 321
Web: www.TubeFit.com.au
Contact Information
Trade Price List
All prices excluding GSTPage 4
Product Page
Standard Compression – Imperial (Technical Information) 6Standard Compression – Metric (Technical Information) 7Standard Compression – Imperial 8Standard Compression – Metric 14Internal Compression Fittings (Technical Information) 17Internal Compression – Imperial 18SAE 45° Flare Fittings (Technical Information) 22SAE 45° Inverted Flare Fittings (Technical Information) 23SAE 45° Flare Fittings – Imperial 24Flare Fitting Assemblies – Imperial 30SAE Inverted Flare Fittings – Imperial 32Fleetfit Push-In Fittings (Technical Information) 36Fleetfit Push-In Fittings – Imperial 37Fleetfit Push-In Fittings – Metric 391800 Series Air Brake Fittings – Push-In 431400 Series Air Brake Fittings – Nylon 471300 Series Air Brake Fittings – Copper 51Pneufit Push-In Fittings (Technical Information) 55Pneufit Brass Push-In Fittings – Imperial 56Pneufit Brass Push-In Fittings – Metric 58Pneufit Composite Push-In Fittings – Imperial 60Pneufit Composite Push-In Fittings – Metric 62
Airline
Product Page
Barbed Brass Fittings (Technical Information) 84Barbed Brass Fittings 85Barbed Brass Fittings – NPT 89Jamec Pem Couplings & Adaptors (Technical Information) 92Jamec Pem Couplings & Adaptors 96Nitto Couplings & Adaptors (Technical Information) 102Nitto Couplings & Adaptors 105Ryco Couplings & Adaptors (Technical Information) 114Ryco Couplings & Adaptors 119Brakefit Couplings & Adaptors 124Air Guns 127Tyre Inflation & Tyre Gauges 129Norgren Air Preparation Equipment 130
Threaded Adaptors
Product Page
Threaded Adaptors (Technical Information) 64DZR Brass Adaptors – AS IS0 7.1/2 (previously AS 1722.1) 66Screwed Brassware – Plumbing Style 70Standard 316 Stainless Steel 74DZR Metric x BSP / NPT Adaptors 78Brass Adaptors – NPT 80
Index
All prices excluding GST Page 5
Valves and Taps
Product Page
Brass Ball Valves (Technical Information) 142Brass Ball Valves 156Brass 3 Way Ball Valves 159Miscellaneous Valves 160Truck Valves 162Stainless Steel Ball Valves – 316 Grade 163Needle Valves 164Lever Taps 165Miscellaneous Valves 167
Merchandising
Product Page
Point Of Sale Merchandisers 193
Specific Application Products
Product Page
Specific Application Fittings 132Thread Sealant & Tape 133Grease Guns 133Oil Suction Guns 133Engine Cleaning Gun 133Hydraulic Grease Nipples 134Pressure Gauges 137
Technical Information
Product Page
Tube & Thread Profile Chart 194Thread Information 195Tube Connection Fittings 198Maximum Working Pressure Tables – Copper Tubes 199Corrosion Rating Charts 200Conversion Tables 203Conversion Factors 204
Hose Tube and Accessories
Product Page
PVC Hose Tube (Technical Information) 168PVC Airline Hose & Assemblies 180Clear Vinyl & Polyeurethane Tubing 182Nylon Tubing 184Polyethylene Tubing 187Custom Made Products 188Jubilee Worm Drive Hose Clamps 189Tools 190Oetiker O-Clips 191Retractable Hose Reels 192
Index
All prices excluding GSTPage 6
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Standard Compression Fittings – Imperial
Standard Compression fittings are a good option for connecting tube in applications involving minor vibration.
Comprising of 3 pieces – nut, sleeve and a body, Standard Compression fittings are a popular choice amongst tradesmen because of the many application possibilities the product offers (not gas), only minimal tube preparation is required and specialist tools are not needed to effect a sound joint.
Style and Description
• 0-3500kPa depending upon tube size and media.
Working Pressure
• Compression nut
• Universal sleeve
• Compression body
• Material: 352 DZR Alloy
• Pipe Thread BSP: AS IS0 7.1/2 previously AS 1722.1) Tapered Male (R Series) Parallel Female (Rp Series)
• Pipe Thread NPT
Construction
Nylon
Poly tube
Copper – Annealead and hard drawn
Aluminum
Brass
Steel bundy
Stainless steel
Tube
Compressed air lines
Water
Fuel lines
Oil lines
Lubrication lines
Gas
Media / Application
1. Cut the tube square, clean and remove any burrs or loose cuttings.
2. If using metallic tube, move to point 3. If using non-metallic tube, insert the appropriate TubeFit No. 99 spigot into the end of the tube.
3. Loosen nut 1/2 turn and insert tube into the mouth of the fitting. Ensure the tube passes through the sleeve and rests against the tube stop. (The tube is resting against the tube stop when the tubing can no longer be inserted any further into the body of he fitting).
4. From finger tight, tighten nut to ‘spanner firm’ position. (Caution: do not over-tighten.)
5. If used in a pneumatic application, apply a soapy solutionto the joint to be certain a positive seal has been made. Visually inspect or leaks if used in an hydraulic application.
Assembly & Installation
All prices excluding GST Page 7
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Standard Compression Fittings – Metric
Standard Compression fittings are a good option for connecting tube in applications involving minor vibration.
Comprising of 3 pieces – nut, sleeve and a body, Standard Compression fittings are a popular choice amongst tradesmen because of the many application possibilities the product offers (not gas), only minimal tube preparation is required and specialist tools are not needed to effect a sound joint.
Style and Description
• 0-3500kPa depending upon tube size and media.
Working Pressure
• Compression nut
• Universal sleeve
• Compression body
• Material: 352 DZR Alloy
• Pipe Thread BSP: AS IS0 7.1/2 (previously AS 1722.1) Tapered Male (R Series) Parallel Female (Rp Series)
Construction
Nylon
Poly tube
Copper – Annealead and hard drawn
Aluminum
Brass
Steel bundy
Stainless steel
Tube
Compressed air lines
Water
Fuel lines
Oil lines
Lubrication lines
Gas
Media / Application
1. Cut the tube square, clean and remove any burrs or loose cuttings.
2. If using metallic tube, move to point 3. If using non-metallic tube, insert the appropriate TubeFit No. 99 spigot into the end of the tube.
3. Loosen nut 1/2 turn and insert tube into the mouth of the fitting. Ensure the tube passes through the sleeve and rests against the tube stop. (The tube is resting against the tube stop when the tubing can no longer be inserted any further into the body of the fitting).
4. From finger tight, tighten nut to ‘spanner firm’ position. (Caution: do not over-tighten.)
5. If used in a pneumatic application, apply a soapy solution to the joint to be certain a positive seal has been made. Visually inspect for leaks if used in an hydraulic application.
Assembly & Installation
All prices excluding GSTPage 8
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Standard Compression – Imperial
No 100 Universal Compression Sleeve
Order Code Tube RRP List Price
01100-02 1/8 0.51 0.3401100-03 3/16 0.45 0.3001100-04 1/4 0.40 0.2701100-05 5/16 0.53 0.3501100-06 3/8 0.59 0.3901100-08 1/2 1.00 0.6701100-10 5/8 2.53 1.6901100-12 3/4 2.81 1.87
No 3 Male Connector
Order Code Tube x BSPT RRP List Price
01003-0202 1/8 x 1/8 2.83 1.8801003-0204 1/8 x 1/4 7.15 4.7701003-0302 3/16 x 1/8 2.81 1.8701003-0304 3/16 x 1/4 4.26 2.8401003-0402 1/4 x 1/8 2.90 1.9401003-0404 1/4 x 1/4 3.62 2.4101003-0406 1/4 x 3/8 5.52 3.6801003-0408 1/4 x 1/2 12.82 8.5501003-0502 5/16 x 1/8 3.54 2.3601003-0504 5/16 x 1/4 4.39 2.9301003-0506 5/16 x 3/8 6.37 4.2401003-0602 3/8 x 1/8 5.13 3.4201003-0604 3/8 x 1/4 4.84 3.2201003-0606 3/8 x 3/8 5.76 3.8401003-0608 3/8 x 1/2 8.62 5.7501003-0804 1/2 x 1/4 8.16 5.4401003-0806 1/2 x 3/8 7.60 5.0701003-0808 1/2 x 1/2 9.97 6.64
No 2 Compression Nut
Order Code Tube RRP List Price
01002-02 1/8 0.83 0.5601002-03 3/16 0.91 0.6101002-04 1/4 0.97 0.6501002-05 5/16 1.27 0.8401002-06 3/8 1.58 1.0501002-08 1/2 2.18 1.45
No 1 Compression Sleeve – For Metal Tube
Order Code Tube RRP List Price
01001-02 1/8 0.46 0.3101001-03 3/16 0.51 0.3401001-04 1/4 0.40 0.2701001-05 5/16 0.53 0.3501001-06 3/8 0.59 0.3901001-08 1/2 1.00 0.67
All prices excluding GST Page 9
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 5 Male Elbow
Order Code Tube x BSPT RRP List Price
01005-0202 1/8 x 1/8 9.63 6.4201005-0302 3/16 x 1/8 7.06 4.7101005-0304 3/16 x 1/4 11.66 7.7801005-0402 1/4 x 1/8 6.77 4.5101005-0404 1/4 x 1/4 9.44 6.2901005-0406 1/4 x 3/8 13.32 8.8801005-0502 5/16 x 1/8 8.20 5.4701005-0504 5/16 x 1/4 9.84 6.5601005-0506 5/16 x 3/8 15.73 10.4901005-0508 5/16 x 1/2 36.89 24.6001005-0602 3/8 x 1/8 11.40 7.6001005-0604 3/8 x 1/4 10.18 6.7901005-0606 3/8 x 3/8 12.79 8.5301005-0608 3/8 x 1/2 23.59 15.7301005-0804 1/2 x 1/4 14.72 9.8201005-0806 1/2 x 3/8 15.09 10.0601005-0808 1/2 x 1/2 18.46 12.31
No 99 Tube Spigot
Order Code Tube OD x ID RRP List Price
05100-03 3/16 x .125 1.06 0.7105100-04 1/4 x .168 1.12 0.7505100-05 5/16 x .214 2.32 1.5505100-06 3/8 x .258 1.90 1.2705100-08 1/2 x .347 1.78 1.1905100-10 5/8 x .495 8.62 5.75
05100-YL04 1/4 x .147 4.60 3.0705100-YL05 5/16 x .186 4.60 3.0705100-YL06 3/8 x .224 4.14 2.7605100-YL08 1/2 x .303 3.40 2.27
No 4R Reducing Tube Union
Order Code Tube x Tube RRP List Price
01004-0402 1/4 x 1/8 18.80 12.5401004-0403 1/4 x 3/16 10.55 7.0301004-0504 5/16 x 1/4 10.71 7.1401004-0604 3/8 x 1/4 11.49 7.6601004-0605 3/8 x 5/16 11.49 7.6601004-0804 1/2 x 1/4 21.77 14.5101004-0806 1/2 x 3/8 14.60 9.73
No 4 Tube Union
Order Code Tube RRP List Price
01004-02 1/8 4.64 3.0901004-03 3/16 4.57 3.0501004-04 1/4 5.08 3.3901004-05 5/16 6.49 4.3301004-06 3/8 7.37 4.9101004-08 1/2 12.30 8.20
Standard Compression – Imperial
All prices excluding GSTPage 10
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Standard Compression – Imperial
No 10 Female Connector
No 12 Male Branch Tee
No 14 Tube Tee
No 11 Tube Elbow
No 13 Male Run Tee
Order Code Tube x BSP RRP List Price
01010-0202 1/8 x 1/8 5.56 3.7101010-0302 3/16 x 1/8 5.14 3.4301010-0304 3/16 x 1/4 9.32 6.2101010-0402 1/4 x 1/8 5.56 3.7101010-0404 1/4 x 1/4 6.49 4.3301010-0406 1/4 x 3/8 15.56 10.3701010-0502 5/16 x 1/8 17.61 11.7401010-0504 5/16 x 1/4 9.66 6.4401010-0602 3/8 x 1/8 11.40 7.6001010-0604 3/8 x 1/4 11.49 7.6601010-0606 3/8 x 3/8 7.71 5.1401010-0608 3/8 x 1/2 10.74 7.1601010-0804 1/2 x 1/4 20.70 13.8001010-0806 1/2 x 3/8 15.94 10.6301010-0808 1/2 x 1/2 16.61 11.07
Order Code Tube x BSPT RRP List Price
01012-0302 3/16 x 1/8 22.77 15.1801012-0402 1/4 x 1/8 16.33 10.8901012-0404 1/4 x 1/4 17.27 11.5201012-0502 5/16 x 1/8 21.80 14.5301012-0504 5/16 x 1/4 18.35 12.2401012-0602 3/8 x 1/8 29.97 19.9801012-0604 3/8 x 1/4 25.54 17.0301012-0606 3/8 x 3/8 25.54 17.0301012-0804 1/2 x 1/4 31.29 20.8601012-0806 1/2 x 3/8 39.52 26.3501012-0808 1/2 x 1/2 43.15 28.77
Order Code Tube RRP List Price
01014-02 1/8 16.27 10.8501014-03 3/16 15.26 10.1801014-04 1/4 14.51 9.6701014-05 5/16 16.61 11.0701014-06 3/8 18.20 12.1301014-08 1/2 26.81 17.87
Order Code Tube RRP List Price
01011-02 1/8 14.34 9.5601011-03 3/16 13.91 9.2701011-04 1/4 11.40 7.6001011-05 5/16 11.97 7.9801011-06 3/8 13.66 9.1101011-08 1/2 20.93 13.96
Order Code Tube x BSPT RRP List Price
01013-0402 1/4 x 1/8 18.82 12.5501013-0404 1/4 x 1/4 16.61 11.0701013-0504 5/16 x 1/4 16.92 11.2801013-0604 3/8 x 1/4 18.51 12.3401013-0606 3/8 x 3/8 32.20 21.4701013-0806 1/2 x 3/8 57.40 38.26
All prices excluding GST Page 11
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 15 Female Elbow
No 31F Female Bulkhead Union
No 31 Bulkhead Union
Order Code Tube x BSP RRP List Price
01015-0302 3/16 x 1/8 13.33 8.8901015-0402 1/4 x 1/8 11.93 7.9501015-0404 1/4 x 1/4 14.45 9.6301015-0502 5/16 x 1/8 23.50 15.6701015-0504 5/16 x 1/4 16.19 10.7901015-0604 3/8 x 1/4 13.50 9.0001015-0606 3/8 x 3/8 29.48 19.6501015-0806 1/2 x 3/8 25.46 16.9701015-0808 1/2 x 1/2 36.21 24.14
Order Code Tube x BSP RRP List Price
01031-F0402 1/4 x 1/8 13.33 8.89
Order Code Tube RRP List Price
01031-04 1/4 20.70 13.8001031-05 5/16 22.91 15.2701031-06 3/8 31.72 21.15
Standard Compression – Imperial
All prices excluding GSTPage 12
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Standard Compression – Imperial x NPT
No 3 NPT Male Connector
No 10 NPT Female Connector
No 15 NPT Female Elbow
No 5 NPT Male Elbow
No 12 NPT Male Branch Tee
Order Code Tube x NPT RRP List Price
68x2 1/8 x 1/8 3.57 2.3868x3 3/16 x 1/8 3.45 2.3068x4 1/4 x 1/8 2.61 1.74
68x4x4 1/4 x 1/4 4.28 2.8568x5 5/16 x 1/8 3.91 2.61
68x5x4 5/16 x 1/4 4.84 3.2268x6x2 3/8 x 1/8 4.57 3.0568x6 3/8 x 1/4 5.48 3.66
68x6x6 3/8 x 3/8 7.23 4.8268x6x8 3/8 x 1/2 8.48 5.6568x8x4 1/2 x 1/4 9.27 6.1868x8 1/2 x 3/8 9.27 6.18
68x8x8 1/2 x 1/2 13.77 9.18
Order Code Tube x NPT RRP List Price
66x3 3/16 x 1/8 5.31 3.5466x4 1/4 x 1/8 5.59 3.73
66x4x4 1/4 x 1/4 7.52 5.0266x5 5/16 x 1/8 9.87 6.58
66x6x2 3/8 x 1/8 11.32 7.5566x6 3/8 x 1/4 6.71 4.47
Order Code Tube x NPT RRP List Price
70x4 1/4 x 1/8 5.78 3.85
Order Code Tube x NPT RRP List Price
69x3 3/16 x 1/8 4.11 2.7469x4 1/4 x 1/8 8.88 5.92
69x4x4 1/4 x 1/4 11.11 7.4169x5 5/16 x 1/8 6.81 4.54
69x5x4 5/16 x 1/4 6.43 4.2869x6x2 3/8 x 1/8 6.26 4.1769x6 3/8 x 1/4 6.91 4.60
69x6x6 3/8 x 3/8 9.50 6.3369x6x8 3/8 x 1/2 18.37 12.2569x8x4 1/2 x 1/4 24.26 16.1769x8 1/2 x 3/8 10.91 7.27
69x8x8 1/2 x 1/2 21.01 14.0169x10 5/8 x 1/2 20.53 13.69
Order Code Tube x NPT RRP List Price
72x4 1/4 x 1/8 11.28 7.5272x5 5/16 x 1/8 15.85 10.5772x6 3/8 x 1/4 11.93 7.95
All prices excluding GST Page 13
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Standard Compression – Imperial x NPT
No 1 Compression Sleeve
No 4 Tube Union
No 11 Union Elbow
No 2 Compression Nut
No 14 Union Tee
Order Code Description RRP List Price
60x2 1/8" Compression Sleeve 0.32 0.2260x3 3/16" Compression Sleeve 0.26 0.1860x4 1/4" Compression Sleeve 0.23 0.1560x5 5/16" Compression Sleeve 0.26 0.1860x6 3/8" Compression Sleeve 0.39 0.2660x8 1/2" Compression Sleeve 0.74 0.49
60x10 5/8" Compression Sleeve 2.05 1.37
Order Code Description RRP List Price
62x2 1/8" Compression Union 5.21 3.4762x3 3/16" Compression Union 5.21 3.4762x4 1/4" Compression Union 5.21 3.4762x5 5/16" Compression Union 5.87 3.9162x6 3/8" Compression Union 5.27 3.5162x8 1/2" Compression Union 12.11 8.0862x10 5/8" Compression Union 20.98 13.99
Order Code Description RRP List Price
61x2 1/8" Compression Nut 0.77 0.5261x4 1/4" Compression Nut 0.94 0.63
61x10 5/8" Compression Nut 3.62 2.41
Order Code Description RRP List Price
65x4 1/4" Compression Elbow Union 8.11 5.4165x5 5/16" Compression Elbow Union 12.53 8.3565x6 3/8" Compression Elbow Union 10.75 7.17
Order Code Description RRP List Price
64x4 1/4" Compression Tee Union 12.96 8.6464x5 5/16" Compression Tee Union 13.77 9.1864x6 3/8" Compression Tee Union 15.93 10.6264x8 1/2" Compression Tee Union 33.26 22.18
All prices excluding GSTPage 14
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No M100 Compression Sleeve
No M99 Tube Spigot
No M4 Tube Union
No M2 Compression Nut
No M3 Male Connector
Order Code Tube RRP List Price
32001-04 4mm 0.70 0.4632001-06 6mm 0.79 0.5332001-08 8mm 0.79 0.5332001-10 10mm 1.27 0.8432001-12 12mm 1.50 1.00
Order Code Tube OD x ID RRP List Price
32100-04 4mm x 2.7mm 0.90 0.6032100-06 6mm x 4.0mm 0.90 0.6032100-08 8mm x 5.2mm 1.08 0.7232100-10 10mm x 6.6mm 2.19 1.4632100-12 12mm x 8.0mm 2.60 1.73
Order Code Tube RRP List Price
32004-04 4mm 6.89 4.5932004-06 6mm 8.06 5.3832004-08 8mm 10.35 6.9032004-10 10mm 17.94 11.9632004-12 12mm 20.22 13.48
Order Code Tube RRP List Price
32002-04 4mm 1.71 1.1432002-06 6mm 1.84 1.2332002-08 8mm 2.18 1.4532002-10 10mm 4.73 3.1532002-12 12mm 5.98 3.99
Order Code Tube x BSPT RRP List Price
32003-0402 4mm x 1/8 4.60 3.0732003-0602 6mm x 1/8 5.18 3.4532003-0604 6mm x 1/4 6.10 4.0732003-0606 6mm x 3/8 11.73 7.8232003-0802 8mm x 1/8 11.49 7.6632003-0804 8mm x 1/4 11.49 7.6632003-0806 8mm x 3/8 11.49 7.6632003-1002 10mm x 1/8 11.96 7.9732003-1004 10mm x 1/4 11.96 7.9732003-1006 10mm x 3/8 11.96 7.9732003-1008 10mm x 1/2 18.40 12.2732003-1204 12mm x 1/4 13.81 9.2132003-1206 12mm x 3/8 13.81 9.2132003-1208 12mm x 1/2 16.10 10.73
Standard Compression – Metric
All prices excluding GST Page 15
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Standard Compression – Metric
No M5 Male Elbow
No M11 Tube Elbow
No M10 Female Connector
No M12 Male Branch Tee
Order Code Tube x BSPT RRP List Price
32005-0402 4mm x 1/8 10.58 7.0632005-0404 4mm x 1/4 14.71 9.8132005-0602 6mm x 1/8 16.10 10.7332005-0604 6mm x 1/4 16.33 10.8932005-0802 8mm x 1/8 16.10 10.7332005-0804 8mm x 1/4 16.56 11.0432005-0806 8mm x 3/8 17.26 11.5132005-1004 10mm x 1/4 20.93 13.9632005-1006 10mm x 3/8 21.40 14.2732005-1008 10mm x 1/2 37.08 24.7232005-1204 12mm x 1/4 20.70 13.8032005-1206 12mm x 3/8 23.01 15.3432005-1208 12mm x 1/2 30.02 20.01
Order Code Tube RRP List Price
32011-04 4mm 14.51 9.6732011-06 6mm 15.25 10.1732011-08 8mm 17.86 11.9132011-10 10mm 26.81 17.8732011-12 12mm 32.32 21.55
Order Code Tube x BSP RRP List Price
32010-0402 4mm x 1/8 9.93 6.6232010-0404 4mm x 1/4 20.47 13.6532010-0602 6mm x 1/8 8.70 5.8032010-0604 6mm x 1/4 9.89 6.5932010-0606 6mm x 3/8 11.03 7.3532010-0802 8mm x 1/8 17.26 11.5132010-0804 8mm x 1/4 17.26 11.5132010-0806 8mm x 3/8 17.26 11.5132010-1004 10mm x 1/4 20.56 13.7132010-1006 10mm x 3/8 27.59 18.4032010-1008 10mm x 1/2 40.94 27.3032010-1204 12mm x 1/4 29.90 19.9332010-1206 12mm x 3/8 29.90 19.9332010-1208 12mm x 1/2 34.48 22.99
Order Code Tube x BSPT RRP List Price
32012-0402 4mm x 1/8 27.89 18.5932012-0602 6mm x 1/8 28.81 19.2132012-0604 6mm x 1/4 35.54 23.6932012-0802 8mm x 1/8 36.15 24.1032012-0804 8mm x 1/4 35.77 23.8432012-0806 8mm x 3/8 29.69 19.8032012-1004 10mm x 1/4 58.56 39.0432012-1006 10mm x 3/8 61.72 41.1532012-1204 12mm x 1/4 51.29 34.2032012-1206 12mm x 3/8 54.08 36.05
All prices excluding GSTPage 16
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No M31 Bulkhead Union
No M14 Tube Tee
Order Code Tube RRP List Price
32031-04 4mm 37.70 25.1332031-06 6mm 36.69 24.4632031-08 8mm 37.23 24.8232031-10 10mm 60.10 40.0732031-12 12mm 70.76 47.17
Order Code Tube RRP List Price
32014-04 4mm 18.35 12.2432014-06 6mm 18.35 12.2432014-08 8mm 19.54 13.0332014-10 10mm 33.59 22.3932014-12 12mm 40.31 26.87
Standard Compression – Metric
All prices excluding GST Page 17
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Internal Compression Fittings
Unquestionably versatile and used extensively throughout the Pneumatics Industry, Internal Compression fittings provide tradesman with a product suitable for applications involving high levels of vibration because the nut gives added tube support. Like most compression products, Internal Compression fittings consist of a nut(s), sleeve(s), body, requires only minimal tube preparation and specialist tools are not required to effect a sound joint.
• 0-3500kPa depending upon tube size and media.
• Compression nut
• Universal sleeve
• Compression body
• Material: 352 DZR Alloy
• Pipe Thread BSP: AS IS0 7.1/2 (previously AS 1722.1) Tapered Male (R series) Parallel Female (Rp Series)
Nylon
Poly tube
Copper – Annealead and hard drawn
Aluminium
Brass
Steel bundy
Stainless steel
Compressed air lines
Water
Fuel lines
Oil lines
Lubrication lines
Gas
1. Cut the tube square, clean and remove any burrs or loose cuttings.
2. If using metallic tube, move to point 3. If using non-metallic tube, insert a TubeFit No. 99 spigot into the end of the tube.
3. Loosen nut 1/2 turn and insert tube into the mouth of the fitting. Ensure the tube passes through the sleeve and rests against the tube stop. (The tube is resting against the tube stop when the tubing can no longer be inserted any further into the body of the fitting).
4. From finger tight, tighten nut to ‘spanner firm’ position (Caution: do not over-tighten).
5. If used in a pneumatic application, apply a soapy solution to the joint to be certain a positive seal has been made. Visually inspect for leaks if used in an hydraulic application.
Style and Description
Working Pressure
Construction
Tube
Media / Application
Assembly & Installation
All prices excluding GSTPage 18
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 100 Universal Compression Sleeve
No 99 Tube Spigot
No Z2 Compression Nut
Order Code Tube RRP List Price
01100-02 1/8 0.51 0.3401100-03 3/16 0.45 0.3001100-04 1/4 0.40 0.2701100-05 5/16 0.53 0.3501100-06 3/8 0.59 0.3901100-08 1/2 1.00 0.6701100-10 5/8 2.53 1.6901100-12 3/4 2.81 1.87
Order Code Tube OD x ID RRP List Price
05100-03 3/16 x .125 1.07 0.7105100-04 1/4 x .168 1.13 0.7505100-05 5/16 x .214 2.32 1.5505100-06 3/8 x .258 1.90 1.2705100-08 1/2 x .347 1.79 1.1905100-10 5/8 x .495 8.62 5.75
05100-YL04 1/4 x .147 4.60 3.0705100-YL05 5/16 x .186 4.60 3.0705100-YL06 3/8 x .224 4.14 2.7605100-YL08 1/2 x .303 3.40 2.27
Order Code Tube RRP List Price
05002-02 1/8 2.16 1.4405002-03 3/16 1.30 0.8705002-04 1/4 1.40 0.9305002-05 5/16 1.76 1.1705002-06 3/8 1.64 1.0905002-08 1/2 3.96 2.6405002-10 5/8 8.40 5.6005002-12 3/4 9.70 6.47
Internal Compression – Imperial
All prices excluding GST Page 19
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No Z3 Male Connector
No Y5 Male Elbow
Order Code Tube x BSPT RRP List Price
05003-0202 1/8 x 1/8 6.80 4.5305003-0204 1/8 x 1/4 15.57 10.3805003-0304 3/16 x 1/4 5.41 3.6105003-0402 1/4 x 1/8 5.56 3.7105003-0404 1/4 x 1/4 5.56 3.7105003-0406 1/4 x 3/8 8.95 5.9605003-0408 1/4 x 1/2 13.87 9.2505003-0502 5/16 x 1/8 6.91 4.6005003-0504 5/16 x 1/4 6.63 4.4205003-0506 5/16 x 3/8 10.31 6.8705003-0508* 5/16 x 1/2 20.58 13.7205003-0604 3/8 x 1/4 6.63 4.4205003-0608 3/8 x 1/2 9.78 6.5205003-0804 1/2 x 1/4 16.15 10.7605003-0806 1/2 x 3/8 15.11 10.0705003-0808 1/2 x 1/2 14.46 9.6405003-0812 1/2 x 3/4 24.67 16.4505003-1006* 5/8 x 3/8 25.13 16.7505003-1212 3/4 x 3/4 34.61 23.07
Order Code Tube x BSPT RRP List Price
05005-0202 1/8 x 1/8 12.48 8.3205005-0302 3/16 x 1/8 14.71 9.8105005-0304 3/16 x 1/4 14.88 9.9205005-0402 1/4 x 1/8 12.79 8.5305005-0404 1/4 x 1/4 12.79 8.5305005-0406 1/4 x 3/8 19.31 12.8805005-0502 5/16 x 1/8 15.98 10.6505005-0504 5/16 x 1/4 17.09 11.3905005-0506 5/16 x 3/8 20.83 13.8805005-0602 3/8 x 1/8 16.61 11.0705005-0604 3/8 x 1/4 16.13 10.7505005-0606 3/8 x 3/8 16.41 10.9405005-0608 3/8 x 1/2 23.95 15.9705005-0804 1/2 x 1/4 18.91 12.6105005-0806 1/2 x 3/8 18.91 12.6105005-0808 1/2 x 1/2 28.01 18.67
Internal Compression Fittings
No Z4 Tube Union
Order Code Tube RRP List Price
05004-02 1/8 11.82 7.8805004-03 3/16 9.55 6.3705004-04 1/4 8.91 5.9405004-05 5/16 9.46 6.3005004-06 3/8 12.50 8.33
*While stocks last
All prices excluding GSTPage 20
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No Z10 Female Connector
No Y12 Male Branch Tee
No Y14 Tube Tee
No Y11 Tube Elbow
No Y13 Male Run Tee
Order Code Tube x BSP RRP List Price
05010-0202 1/8 x 1/8 17.52 11.6805010-0302 3/16 x 1/8 18.54 12.3605010-0404 1/4 x 1/4 9.84 6.5605010-0604 3/8 x 1/4 13.61 9.0705010-0606 3/8 x 3/8 14.62 9.7405010-0806 1/2 x 3/8 18.49 12.3305010-0808 1/2 x 1/2 21.80 14.5305010-1212 3/4 x 3/4 42.22 28.15
Order Code Tube x BSPT RRP List Price
05012-0202 1/8 x 1/8 21.91 14.6105012-0302 3/16 x 1/8 24.18 16.1205012-0304 3/16 x 1/4 25.46 16.9705012-0402* 1/4 x 1/8 24.56 16.3705012-0404 1/4 x 1/4 20.90 13.9405012-0502 5/16 x 1/8 31.98 21.3205012-0504 5/16 x 1/4 28.81 19.2105012-0604* 3/8 x 1/4 33.44 22.29
Order Code Tube RRP List Price
05014-02 1/8 14.82 9.8805014-03 3/16 17.04 11.3605014-05 5/16 19.20 12.8005014-06 3/8 26.48 17.65
Order Code Tube x Tube RRP List Price
05011-04* 1/4 x 1/4 16.81 11.2105011-05* 5/16 x 5/16 18.32 12.2205011-10* 5/8 x 5/8 50.71 33.80
Order Code Tube x BSPT RRP List Price
05013-0202 1/8 x 1/8 26.30 17.5305013-0302 3/16 x 1/8 23.61 15.7405013-0402 1/4 x 1/8 23.18 15.4505013-0504 5/16 x 1/4 29.09 19.3905013-0604 3/8 x 1/4 29.09 19.3905013-0806 1/2 x 3/8 46.80 31.20
Internal Compression – Imperial
*While stocks last
*While stocks last
*While stocks last
All prices excluding GST Page 21
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No Y15 Female Elbow
No Z65 Plug
Order Code Tube x BSP RRP List Price
05015-0402 1/4 x 1/8 26.65 17.7705015-0404 1/4 x 1/4 27.35 18.2305015-0502* 5/16 x 1/8 26.33 17.5505015-0504 5/16 x 1/4 28.09 18.7305015-0604 3/8 x 1/4 28.81 19.2105015-0606* 3/8 x 3/8 28.25 18.83
Order Code Tube RRP List Price
05065-02 1/8 8.19 5.4605065-04 1/4 3.71 2.4705065-05 5/16 4.30 2.8605065-06 3/8 6.89 4.5905065-08 1/2 9.36 6.24
Internal Compression Fittings – Imperial
No Z31 Bulkhead Union
No Z72 Reducing Tube Adaptor
Order Code Tube RRP List Price
05031-03 3/16 25.65 17.1005031-05 5/16 25.43 16.9505031-08 1/2 43.31 28.87
Order Code Tube x Tube RRP List Price
05072-0403 1/4 x 3/16 9.27 6.1805072-0504 5/16 x 1/4 9.36 6.2405072-0604 3/8 x 1/4 9.47 6.3105072-0804 1/2 x 1/4 12.16 8.1105072-0805* 1/2 x 5/16 11.81 7.87
*While stocks last
*While stocks last
All prices excluding GSTPage 22
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
SAE 45° Flare Fittings
Used extensively in the Plumbing and Gas Sectors, SAE 45° Flare fittings offer an excellent alternative to fittings that require a heat/flame to complete a seal. Flare fittings require the tube to be ‘belled’ or flared prior to assembly as the flared piece of tube is held in place between the nut and body.
Flare Fittings are ideal in situations involving mid-high level vibration.
0-17250kPa depending upon tube size and media.
• Flare Nut
• Flare Body
• Material: 352 DZR Alloy
• Pipe Thread BSP: AS IS0 7.1/2 (previously AS 1722.1) Tapered Male (R series) Parallel Female (Rp Series)
• Pipe Thread NPT
Copper – Annealed and hard drawn
Brass
Aluminium
Steel bundy
Stainless Steel
Nylon
Poly tube
Potable Water
Gas
LPG (Auto, domestic and commercial)
Fuel and brake lines
Refrigeration lines
Hydraulics
Pneumatics
1. Cut the tube square, clean and remove any burrs or loose cuttings.
2. Slide tube nut over the tubing.
3. Using a 45° flaring tool, flare the end of the tube (as per tool instructions).
4. After the tube has been flared, ensure the tube nut is able to pass over the flared end and mate with the seat of the nut.
5. Assemble the tube nut onto fitting and tighten until ‘spanner firm’ (Caution: do not over-tighten).
6. If used in a pneumatic application, apply a soapy solution to the joint to be certain a positive seal has been made. Visually inspect for leaks if used in an hydraulic application.
Style and Description
Working Pressure
Construction
Tube
Media / Application
Assembly & Installation
All prices excluding GST Page 23
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
SAE 45° Inverted Flare Fittings
As with other variations of flared fittings, Inverted Flare fittings require preparation of the tube prior to assembly.
Because of its compact design, suitability for applications involving high levels of vibration and excellent performance under high pressure, Inverted Flare can be found extensively in the Automotive Industry.
0-17250kPa depending upon tube size and media.
• Inverted Flare Nut
• Inverted Flare Body
• Material: 352 DZR Alloy
• Pipe Thread BSP: AS IS0 7.1/2 (previously AS 1722.1) Tapered Male (R Series)
Copper – Annealed and hard drawn
Brass
Aluminium
Steel bundy
Stainless Steel
Nylon
Poly tube
LPG (Auto, domestic and commercial)
Fuel and brake lines
Refrigeration lines
Hydraulics
Pneumatics
Plumbing (gas/water)
1. Cut the tube square, clean and remove any burrs or loose cuttings.
2. Slide tube nut over the tubing.
3. Using a 45° flaring tool, flare the end of the tube (as per tool instructions).
4. Assemble the tube nut onto fitting and tighten until ‘spanner firm’ (Caution: do not over-tighten).
5. If used in a pneumatic application, apply a soapy solution to the joint to be certain a positive seal has been made. Visually inspect for leaks if used in an hydraulic application.
Style and Description
Working Pressure
Construction
Tube
Media / Application
Assembly & Installation
All prices excluding GSTPage 24
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 6 Standard Flare Nut
No 6S Short Flare Nut
No 6R Reducing Flare Nut
No 7 Male Connector
Order Code Tube RRP List Price
01006-02 1/8 4.14 2.7601006-03 3/16 1.70 1.1301006-04 1/4 1.68 1.1201006-05 5/16 2.22 1.4801006-06 3/8 3.14 2.0901006-08 1/2 4.79 3.1901006-10 5/8 7.96 5.3001006-12 3/4 13.02 8.68
Order Code Tube RRP List Price
01006-S04 1/4 1.68 1.1201006-S05 5/16 5.48 3.6601006-S06 3/8 7.15 4.7701006-S08 1/2 5.79 3.86
Order Code Tube x Tube RRP List Price
01006-0403 1/4 x 3/16 3.21 2.1401006-0504 5/16 x 1/4 3.60 2.4001006-0604 3/8 x 1/4 3.62 2.4101006-0605 3/8 x 5/16 3.62 2.4101006-0806 1/2 x 3/8 7.34 4.89
Order Code Tube x BSPT RRP List Price
01007-0202 1/8 x 1/8 8.06 5.3801007-0302 3/16 x 1/8 3.91 2.6101007-0304 3/16 x 1/4 7.31 4.8701007-0402 1/4 x 1/8 1.68 1.1201007-0404 1/4 x 1/4 2.78 1.8501007-0406 1/4 x 3/8 4.84 3.2201007-0408 1/4 x 1/2 13.52 9.0101007-0502 5/16 x 1/8 2.44 1.6301007-0504 5/16 x 1/4 2.95 1.9701007-0506 5/16 x 3/8 4.85 3.2301007-0508 5/16 x 1/2 14.37 9.5801007-0602 3/8 x 1/8 3.92 2.6201007-0604 3/8 x 1/4 3.41 2.2801007-0606 3/8 x 3/8 3.92 2.6201007-0608 3/8 x 1/2 7.15 4.7701007-0612 3/8 x 3/4 20.70 13.8001007-0804 1/2 x 1/4 5.72 3.8101007-0806 1/2 x 3/8 5.14 3.4301007-0808 1/2 x 1/2 7.31 4.8701007-0812 1/2 x 3/4 19.00 12.6701007-1008 5/8 x 1/2 11.09 7.4001007-1208 3/4 x 1/2 17.86 11.9101007-1212 3/4 x 3/4 18.80 12.54
SAE 45° Flare Fittings – Imperial
All prices excluding GST Page 25
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 8 Male Elbow
No 8 45° Male Elbow
Order Code Tube x BSPT RRP List Price
01008-0202 1/8 x 1/8 10.66 7.1101008-0302 3/16 x 1/8 11.49 7.6601008-0402 1/4 x 1/8 6.89 4.5901008-0404 1/4 x 1/4 7.23 4.8201008-0406 1/4 x 3/8 16.10 10.7301008-0502 5/16 x 1/8 8.85 5.9001008-0504 5/16 x 1/4 8.62 5.7501008-0506 5/16 x 3/8 12.02 8.0101008-0602 3/8 x 1/8 12.98 8.6501008-0604 3/8 x 1/4 9.15 6.1001008-0606 3/8 x 3/8 9.15 6.1001008-0608 3/8 x 1/2 18.90 12.6001008-0804 1/2 x 1/4 13.75 9.1701008-0806 1/2 x 3/8 12.33 8.2201008-0808 1/2 x 1/2 12.90 8.6001008-0812 1/2 x 3/4 36.35 24.2401008-1008 5/8 x 1/2 22.60 15.0701008-1012 5/8 x 3/4 31.98 21.3201008-1208 3/4 x 1/2 37.62 25.08
Order Code Tube x BSPT RRP List Price
01008-450502 5/16 x 1/8 44.50 29.6601008-450504 5/16 x 1/4 17.92 11.9501008-450604 3/8 x 1/4 29.60 19.73
SAE 45° Flare Fittings – Imperial
No 16 Female Connector
Order Code Tube x BSP RRP List Price
01016-0302 3/16 x 1/8 7.31 4.8701016-0304 3/16 x 1/4 12.75 8.5001016-0402 1/4 x 1/8 5.25 3.5001016-0404 1/4 x 1/4 4.08 2.7201016-0406 1/4 x 3/8 7.82 5.2101016-0502 5/16 x 1/8 7.77 5.1801016-0504 5/16 x 1/4 4.84 3.2201016-0506 5/16 x 3/8 9.12 6.0801016-0508 5/16 x 1/2 17.80 11.8701016-0602 3/8 x 1/8 6.69 4.4601016-0604 3/8 x 1/4 4.13 2.7501016-0606 3/8 x 3/8 5.89 3.9201016-0608 3/8 x 1/2 9.21 6.1401016-0804 1/2 x 1/4 9.39 6.2601016-0806 1/2 x 3/8 8.48 5.6501016-0808 1/2 x 1/2 9.52 6.3401016-0812 1/2 x 3/4 26.74 17.8301016-1208 3/4 x 1/2 26.74 17.8301016-1212 3/4 x 3/4 26.74 17.83
All prices excluding GSTPage 26
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 17 Flare Union
No 18 Tube Elbow
No 20 Male Branch Tee
No 17R Reducing Union
No 19 Tube Tee
Order Code Tube RRP List Price
01017-03 3/16 6.89 4.5901017-04 1/4 2.75 1.8301017-05 5/16 3.49 2.3301017-06 3/8 6.10 4.0701017-08 1/2 10.32 6.8801017-10 5/8 14.37 9.5801017-12 3/4 28.97 19.31
Order Code Tube RRP List Price
01018-03 3/16 23.01 15.3401018-04 1/4 11.49 7.6601018-05 5/16 9.78 6.5201018-06 3/8 11.09 7.4001018-08 1/2 17.35 11.57
Order Code Tube x BSPT RRP List Price
01020-0302 3/16 x 1/8 29.90 19.9301020-0402 1/4 x 1/8 27.70 18.4701020-0404 1/4 x 1/4 16.84 11.2301020-0502 5/16 x 1/8 32.11 21.4001020-0504 5/16 x 1/4 32.11 21.4001020-0604 3/8 x 1/4 32.11 21.4001020-0606 3/8 x 3/8 32.11 21.4001020-0804 1/2 x 1/4 22.23 14.8201020-0808 1/2 x 1/2 34.99 23.33
Order Code Tube x Tube RRP List Price
01017-0504 5/16 x 1/4 9.19 6.1301017-0604 3/8 x 1/4 8.70 5.8001017-0605 3/8 x 5/16 9.86 6.5701017-0806 1/2 x 3/8 12.72 8.48
Order Code Tube RRP List Price
01019-02 1/8 29.90 19.9301019-03 3/16 8.51 5.6801019-04 1/4 11.03 7.3501019-05 5/16 15.60 10.4001019-06 3/8 13.66 9.1101019-08 1/2 17.92 11.9501019-10 5/8 37.51 25.01
SAE 45° Flare Fittings – Imperial
All prices excluding GST Page 27
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 36 Female Elbow
No 65 Plug
Order Code Tube x BSP RRP List Price
01036-0402 1/4 x 1/8 20.59 13.7301036-0404 1/4 x 1/4 18.28 12.1801036-0506 5/16 x 3/8 34.92 23.2801036-0604 3/8 x 1/4 16.22 10.8201036-0606 3/8 x 3/8 20.70 13.8001036-0608 3/8 x 1/2 27.24 18.1601036-0806 1/2 x 3/8 18.31 12.2101036-0808 1/2 x 1/2 24.46 16.3001036-1008 5/8 x1/2 33.76 22.51
Order Code Tube RRP List Price
01065-04 1/4 3.14 2.0901065-05 5/16 5.56 3.7101065-06 3/8 4.33 2.8801065-08 1/2 11.05 7.36
Order Code Tube RRP List Price
01070-08 1/2 10.63 7.09
No 56 Flare Cap Nut
No 70 Swivel Flare Connector
Order Code Tube RRP List Price
01056-04 1/4 4.22 2.8101056-05 5/16 7.31 4.8701056-06 3/8 5.79 3.8601056-08 1/2 9.08 6.0601056-12 3/4 27.32 18.21
SAE 45° Flare Fittings – Imperial
All prices excluding GSTPage 28
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 7 NPT Male Connector
No 6 Flare Nut
Order Code Tube x NPT RRP List Price
48x2 1/8 x 1/8 5.13 3.42
48x3 3/16 x 1/8 1.68 1.1248x4 1/4 x 1/8 1.68 1.12
48x4x4 1/4 x 1/4 2.67 1.7848x5 5/16 x 1/8 2.15 1.43
48x5x4 5/16 x 1/4 2.89 1.9348x6x2 3/8 x 1/8 4.26 2.8448x6 3/8 x 1/4 4.60 3.07
48x6x6 3/8 x 3/8 5.31 3.5448x6x8 3/8 x 1/2 6.86 4.5748x8x4 1/2 x 1/4 5.36 3.5748x8 1/2 x 3/8 4.94 3.30
48x8x8 1/2 x 1/2 8.54 5.7048x10x6 5/8 x 3/8 8.76 5.8448x10 5/8 x 1/2 6.89 4.5948x12 3/4 x 1/2 14.17 9.45
48x12x12 3/4 x 3/4 13.15 8.77
OrderCode Description RRP ListPrice
1110x2 1/8" Flare Tube Nut 0.97 0.65
1110x3 3/16" Flare Tube Nut 1.21 0.801110x4 1/4" Flare Tube Nut 1.50 1.001110x5 5/16" Flare Tube Nut 2.15 1.431110x6 3/8" Flare Tube Nut 3.20 2.13
1110x10 5/8" Flare Tube Nut 7.56 5.04
Order Code Description RRP List Price
41x3 3/16" Flare Tube Nut Long 1.41 0.94
41x4 1/4" Flare Tube Nut Long 1.93 1.2941x8 1/2" Flare Tube Nut Long 5.79 3.86
SAE 45° Flare Fittings – Imperial x NPT
No 8 NPT Male Elbow
No 6 Flare Nut Long
Order Code Tube x NPT RRP List Price
49x3 3/16 x 1/8 3.23 2.1549x4 1/4 x 1/8 2.89 1.93
49x4x4 1/4 x 1/4 3.63 2.4249x5 5/16 x 1/8 4.00 2.67
49x5x4 5/16 x 1/4 4.94 3.3049x6x2 3/8 x 1/8 5.69 3.7949x6 3/8 x 1/4 6.41 4.27
49x6x6 3/8 x 3/8 5.52 3.6849x6x8 3/8 x 1/2 12.59 8.3949x8 1/2 x 3/8 6.54 4.36
49x8x8 1/2 x 1/2 10.07 6.7249x10 5/8 x 1/2 12.47 8.3149x12 3/4 x 1/2 26.45 17.63
49x12x12 3/4 x 3/4 28.37 18.91
All prices excluding GST Page 29
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 17 Flare Union
No 18 Union Elbow
No 8 45° NPT Male Elbow
Order Code Description RRP List Price
42x3 3/16" Flare union 5.39 3.5942x4 1/4" Flare union 2.89 1.9342x5 5/16" Flare union 3.37 2.2542x6 3/8" Flare union 4.74 3.16
42x10 5/8" Flare union 9.13 6.09
Order Code Description RRP List Price
50x4 1/4 x 1/8 Flare NPT Female Elbow 4.39 2.93
50x6 3/8 x 1/4 Flare NPT Female Elbow 8.19 5.46
Order Code Description RRP List Price
55x8 1/2" Flare Union Elbow 11.60 7.74
Order Code Tube x NPT RRP List Price
54x4 1/4 x 1/8 6.07 4.05
54x4x4 1/4 x 1/4 7.15 4.7754x6 3/8 x 1/4 9.32 6.21
54x10 3/8 x 1/2 13.33 8.89
SAE 45° Flare Fittings – Imperial x NPT
No 36 Female Elbow
No 16 NPT Female Connector
Order Code Tube x NPT RRP List Price
46x4 1/4 x 1/8 3.01 2.0146x4x4 1/4 x 1/4 7.25 4.8346x5 5/16 x 1/8 8.57 5.7246x6 3/8 x 1/4 3.41 2.28
46x6x6 3/8 x 3/8 12.13 8.0946x8 1/2 x 3/8 10.68 7.12
All prices excluding GSTPage 30
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 7 Male Connector Assembly
No 16 Female Union Assembly
No 8 Male Elbow Assembly
No 17 Tube Union Assembly
Flare Fitting Assemblies – Imperial
Order Code Tube x BSP RRP List Price
36007-0402 1/4 x 1/8 3.35 2.2436007-0404 1/4 x 1/4 4.47 2.9836007-0406 1/4 x 3/8 6.50 4.3436007-0408 1/4 x 1/2 15.26 10.1836007-0504 5/16 x 1/4 5.14 3.4336007-0602 3/8 x 1/8 7.05 4.7036007-0604 3/8 x 1/4 5.99 4.0036007-0606 3/8 x 3/8 7.05 4.7036007-0608 3/8 x 1/2 10.06 6.7136007-0612 3/8 x 3/4 25.34 16.8936007-0804 1/2 x 1/4 10.49 6.9936007-0806 1/2 x 3/8 9.93 6.62
36007-0806TN 1/2 x 3/8 30.28 20.1936007-0808 1/2 x 1/2 12.10 8.06
36007-0808TN 1/2 x 1/2 39.09 26.0636007-0812 1/2 x 3/4 23.78 15.8536007-1208 3/4 x 1/2 30.90 20.6036007-1212 3/4 x 3/4 31.86 21.24
Order Code Tube x BSP RRP List Price
36008-0402 1/4 x 1/8 8.57 5.7236008-0404 1/4 x 1/4 8.93 5.9536008-0406 1/4 x 3/8 23.45 15.6436008-0504 5/16 x 1/4 10.83 7.2236008-0604 3/8 x 1/4 12.28 8.1936008-0606 3/8 x 3/8 12.28 8.1936008-0608 3/8 x 1/2 21.63 14.4236008-0804 1/2 x 1/4 17.46 11.6436008-0806 1/2 x 3/8 16.04 10.6936008-0808 1/2 x 1/2 16.58 11.05
Order Code Tube x BSP RRP List Price
36016-0404 1/4 x 1/4 5.76 3.8436016-0406 1/4 x 3/8 9.50 6.3336016-0504 5/16 x 1/4 7.05 4.7036016-0506 5/16 x 3/8 11.32 7.5536016-0604 3/8 x 1/4 7.23 4.8236016-0606 3/8 x 3/8 9.01 6.0036016-0608 3/8 x 1/2 12.34 8.2336016-0804 1/2 x 1/4 14.18 9.4636016-0806 1/2 x 3/8 13.29 8.8636016-0808 1/2 x 1/2 14.31 9.5436016-0812 1/2 x 3/4 31.53 21.0236016-1208 3/4 x 1/2 31.70 21.1436016-1212 3/4 x 3/4 39.80 26.53
Order Code Tube RRP List Price
36017-04 1/4 5.92 3.9436017-05 5/16 7.89 5.2636017-06 3/8 11.36 7.5736017-08 1/2 18.20 12.1336017-12 3/4 55.06 36.71
All prices excluding GST Page 31
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 18 Tube Elbow Assembly
No 20 Male Branch Tee Assembly
Flare Fitting Assemblies – Imperial
No 17R Reducing Union Assembly
No 19 Tube Tee Assembly
No 36 Female Elbow Assembly
Order Code Tube x Tube RRP List Price
36017R-0604 3/8 x 1/4 13.50 9.0036017R-0806 1/2 x 3/8 20.64 13.76
Order Code Tube RRP List Price
36018-04 1/4 14.86 9.9136018-06 3/8 16.42 10.9536018-08 1/2 24.49 16.33
Order Code Tube RRP List Price
36019-04 1/4 16.07 10.7136019-05 5/16 21.68 14.4536019-06 3/8 23.05 15.3736019-08 1/2 31.26 20.84
Order Code Tube x BSP RRP List Price
36036-0404 1/4 x 1/4 19.98 13.3236036-0604 3/8 x 1/4 18.97 12.6536036-0606 3/8 x 3/8 23.45 15.6436036-0608 3/8 x 1/2 30.02 20.0136036-0806 1/2 x 3/8 22.02 14.6836036-0808 1/2 x 1/2 28.12 18.75
Order Code Tube x BSP RRP List Price
36020-0404 1/4 x 1/4 18.23 12.15
All prices excluding GSTPage 32
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 58 Brass Inverted Flare Nut
No 58SL Steel Long Inverted Flare Nut
No 59 45° Male Elbow
SAE Inverted Flare Fittings – Imperial
Order Code Tube RRP List Price
01058-02 1/8 11.36 7.5701058-03 3/16 2.24 1.4901058-04 1/4 1.70 1.1301058-05 5/16 1.85 1.2401058-06 3/8 5.48 3.66
No 58S Steel Inverted Flare Nut
No 59 Male Elbow
No 61 Tube Tee
Order Code Tube RRP List Price
01058-S03 3/16 1.70 1.1301058-10MM03 3/16 x 10mm 3.48 2.32
01058-S04 1/4 1.78 1.1801058-S05 5/16 3.86 2.5801058-S06 3/8 8.19 5.46
Order Code Tube RRP List Price
01058-SLR03 3/16 rec'd end 2.16 1.4401058-SL03 3/16 5.45 3.6401058-SL04 1/4 3.91 2.6101058-SL05 5/16 2.94 1.96
Order Code Tube x BSP RRP List Price
01059-0302 3/16 x 1/8 11.87 7.9101059-0402 1/4 x 1/8 12.87 8.5801059-0404 1/4 x 1/4 20.36 13.5801059-0502 5/16 x 1/8 14.91 9.9401059-0504 5/16 x 1/4 16.84 11.2301059-0604 3/8 x 1/4 17.74 11.82
Order Code Tube x BSP RRP List Price
01059-450402 1/4 x 1/8 9.89 6.5901059-450502 5/16 x 1/8 20.16 13.44
Order Code Tube RRP List Price
01061-03 3/16 29.48 19.65
All prices excluding GST Page 33
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No 62W Washer Faced Male Connector
Order Code Tube x BSP RRP List Price
01062-0302 3/16 x 1/8 3.86 2.5801062-0402 1/4 x 1/8 5.25 3.5001062-0404 1/4 x 1/4 4.17 2.7801062-0502 5/16 x 1/8 5.25 3.5001062-0504 5/16 x 1/4 9.66 6.4401062-0604 3/8 x 1/4 8.00 5.3401062-0806* 1/2 x 3/8 17.26 11.5101062-0808* 1/2 x 1/2 25.29 16.86
Order Code Tube RRP List Price
01063-03 3/16 4.37 2.9101063-04 1/4 8.27 5.5101063-05 5/16 5.31 3.5401063-06 3/8 7.73 5.1501063-08 1/2 9.89 6.59
SAE Inverted Flare Fittings – Imperial
No 62 Male Connector
No 63 Tube Union
Order Code Tube x SAE RRP List Price
01062-W0306* 3/16 x 3/8 14.35 9.5701062-W0406 1/4 x 3/8 7.96 5.3001062-W0407* 1/4 x 7/16 17.37 11.58
*While stocks last
*While stocks last
All prices excluding GSTPage 34
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Brass Inverted Flare Fittings – NPT
Brass Inverted Flare Nut
Brass Inverted Flare Plug
Inverted Flare Union
Order Code Description RRP List Price
105x3 3/16" Steel Inverted Flare Nut 0.57 0.38105x4 1/4" Steel Inverted Flare Nut 0.53 0.35105x5 5/16" Steel Inverted Flare Nut 0.63 0.42105x6 3/8" Steel Inverted Flare Nut 1.04 0.69105x8 1/2" Steel Inverted Flare Nut 1.68 1.12
Order Code Description RRP List Price
202x3 3/16 x 1/8 Inverted Flare Male Connector 1.31 0.88202x4x4 1/4 x 1/4 Inverted Flare Male Connector 2.15 1.43202x5 5/16 x 1/8 Inverted Flare Male Connector 1.68 1.12
202x5x4 5/16 x 1/4 Inverted Flare Male Connector 2.36 1.58202x6 3/8 x 1/4 Inverted Flare Male Connector 4.00 2.67
202x6x6 3/8 x 3/8 Inverted Flare Male Connector 4.65 3.10202x8 1/2 x 3/8 Inverted Flare Male Connector 4.65 3.10
202x8x8 1/2 x 1/2 Inverted Flare Male Connector 7.37 4.91
Steel Inverted Flare Nut
Inverted Flare Male Connector
Order Code Description RRP List Price
100x3 3/16" Brass Inverted Flare Nut 1.02 0.68100x4 1/4" Brass Inverted Flare Nut 1.16 0.77100x5 5/16" Brass Inverted Flare Nut 1.21 0.80100x6 3/8" Brass Inverted Flare Nut 1.65 1.10
Order Code Description RRP List Price
131x3 3/16" Brass Inverted Flare Plug 0.57 0.38131x6 3/8" Brass Inverted Flare Plug 3.31 2.20
Order Code Description RRP List Price
302x2 1/8" Inverted Flare Union 1.50 1.00302x3 3/16" Inverted Flare Union 1.68 1.12302x4 1/4" Inverted Flare Union 1.76 1.17302x5 5/16" Inverted Flare Union 2.15 1.43302x6 3/8" Inverted Flare Union 2.05 1.37302x8 1/2" Inverted Flare Union 7.09 4.73
All prices excluding GST Page 35
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Brass Inverted Flare Fittings – NPT
Inverted Flare NPT Male Elbow
Inverted Flare Union Tee
Order Code Description RRP List Price
352x3 3/16 x 1/8 Inverted Flare 45˚ NPT Male Elbow 3.55 2.37352x4 1/4 x 1/8 Inverted Flare 45˚ NPT Male Elbow 4.00 2.67352x6 3/8 x 1/4 Inverted Flare 45˚ NPT Male Elbow 8.93 5.95
Order Code Description RRP List Price
602x3 3/16 x 1/8 Inverted Flare NPT Male Branch Tee 6.54 4.36652x3 3/16 x 1/8 Inverted Flare NPT Female Branch Tee 10.89 7.26
Order Code Description RRP List Price
7896x3 3/16" Steel Inverted Flare Nut Long 0.56 0.377896x4 1/4" Steel Inverted Flare Nut Long 0.74 0.49
Inverted Flare 45˚ NPT Male Elbow
Inverted Flare Branch Tee
Steel Inverted Flare Nut – Long
Order Code Description RRP List Price
402x2 1/8 x 1/8 Inverted Flare NPT Male Elbow 3.63 2.42402x3 3/16 x 1/8 Inverted Flare NPT Male Elbow 2.05 1.37402x4 1/4 x 1/8 Inverted Flare NPT Male Elbow 2.43 1.62
402x4x4 1/4 x 1/4 Inverted Flare NPT Male Elbow 2.98 1.99402x5 5/16 x 1/8 Inverted Flare NPT Male Elbow 2.98 1.99
402x5x4 5/16 x 1/4 Inverted Flare NPT Male Elbow 5.21 3.47402x6 3/8 x 1/4 Inverted Flare NPT Male Elbow 6.15 4.10
402x6x6 3/8 x 3/8 Inverted Flare NPT Male Elbow 7.37 4.91402x8 1/2 x 3/8 Inverted Flare NPT Male Elbow 13.24 8.83
Order Code Description RRP List Price
702x4 1/4" Inverted Flare Union Tee 4.84 3.22702x5 5/16" Inverted Flare Union Tee 5.52 3.68702x6 3/8" Inverted Flare Union Tee 11.32 7.54
All prices excluding GSTPage 36
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Fleetfit Push-In Fittings
Fleetfit fittings are ‘push-in’ or ‘push-fit’ fittings manufactured to withstand the demands of the heavy transport industry.
Designed with specific air brake tube in mind, the body of the fitting has a built-in spigot to give added tube support at the sealing area.
• 0-1050kPa
• Body incorporates collet and ‘O’ ring
• Material: 385 Brass Alloy and Nitrile ‘O’ ring
• Pipe Thread: NPT, NPS, and Metric x 1.5
Nylon (Imperial: SAE J844 & Metric: DIN 74324)
Poly tube
Metal tubes
• DOT FMVSS 106
• SAE J1131
• DIN74324
• TUV Approved
Heavy transport
Air brake systems
Pneumatic plant equipment
Hydraulic applications of any type
1. Cut the tube square using a nylon tube cutter.
2. Slide the tube through the collet into the fitting.
3. Slide the tube firmly through the ‘O’ ring until it rests against the tube stop. Pull on the tubing to ensure a secure joint has been made.
4. To disconnect the tube, push on tube, hold down the collet and withdraw the tube.
Style and Description
Working Pressure
Construction
Tube
Standards
Media / Application
Assembly & Installation
All prices excluding GST Page 37
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Fleetfit Push-In Fittings – Imperial
No FF3 Male Connector
No FF5 Male Elbow
No FF11 Tube Elbow
Order Code Tube x NPT RRP List Price
35003-0402 1/4 x 1/8 10.17 6.7835003-0404 1/4 x 1/4 13.24 8.8335003-0602 3/8 x 1/8 27.76 18.5135003-0604 3/8 x 1/4 14.63 9.7535003-0606 3/8 x 3/8 15.00 10.0035003-0608 3/8 x 1/2 31.36 20.9135003-0804 1/2 x 1/4 20.97 13.9835003-0806 1/2 x 3/8 19.13 12.7535003-0808 1/2 x 1/2 16.16 10.7735003-1006 5/8 x 3/8 33.22 22.1535003-1008 5/8 x 1/2 37.47 24.98
No FF4 Tube Union
No FF5 45° Male Elbow – All 45° Elbows are Non Swivel
Order Code Tube RRP List Price
35004-04 1/4 15.45 10.3035004-06 3/8 19.48 12.9935004-08 1/2 22.46 14.9835004-10 5/8 36.62 24.41
Order Code Tube x NPT RRP List Price
35005-0402 1/4 x 1/8 22.60 15.0735005-0604 3/8 x 1/4 32.41 21.6135005-0804 1/2 x 1/4 65.12 43.4135005-0806 1/2 x 3/8 41.00 27.3435005-0808 1/2 x 1/2 41.53 27.69*35005-1008 5/8 x 1/2 50.32 33.55
Order Code Tube x NPT RRP List Price
35005-450404 1/4 x 1/4 38.59 25.7335005-450806 1/2 x 3/8 27.53 18.3535005-450808 1/2 x 1/2 27.32 18.21
Order Code Tube RRP List Price
35011-04 1/4 21.80 14.5335011-06 3/8 40.09 26.7335011-08 1/2 45.25 30.17
*While stocks last
All prices excluding GSTPage 38
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No FF12 Male Branch Tee – Swivel Type
No FF14 Tube Tee
No FF31 Bulkhead Union
Fleetfit Push-In Fittings – Imperial
Order Code Tube x NPT RRP List Price
35012-0402 1/4 x 1/8 48.59 32.3935012-0404 1/4 x 1/4 54.12 36.0835012-0604 3/8 x 1/4 57.27 38.1835012-0606 3/8 x 3/8 70.56 47.0435012-0808 1/2 x 1/2 73.39 48.93
No FF13 Male Run Tee – Swivel Type
No FF31F Female Bulkhead
Order Code Tube x NPT RRP List Price
35013-0402 1/4 x 1/8 30.75 20.5035013-0404* 1/4 x 1/4 30.75 20.5035013-0604 3/8 x 1/4 33.84 22.5635013-0606 3/8 x 3/8 64.86 43.2435013-0806 1/2 x 3/8 63.79 42.5335013-0808* 1/2 x 1/2 70.41 46.94
Order Code Tube RRP List Price
35014-04 1/4 49.70 33.1435014-06 3/8 33.06 22.0435014-08 1/2 40.48 26.9935014-10 5/8 74.19 49.46
Order Code Tube x NPT RRP List Price
35031-F0402 1/4 x 1/8 29.45 19.6335031-F0404 1/4 x 1/4 25.65 17.1035031-F0604 3/8 x 1/4 34.75 23.1635031-F0606 3/8 x 3/8 30.10 20.0635031-F0608 3/8 x 1/2 34.75 23.1635031-F0806 1/2 x 3/8 40.48 26.9935031-F0808* 1/2 x 1/2 40.48 26.99
Order Code Tube RRP List Price
35031-04 1/4 44.48 29.6535031-06 3/8 47.35 31.5735031-08 1/2 57.23 38.15
*While stocks last
*While stocks last
All prices excluding GST Page 39
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No FFM4 Tube Union
No FFM11 Tube Elbow
Fleetfit Push-In Fittings – Metric
No FFM3 Male Connector
No FFM5 Male Elbow
Order Code Tube x NPT RRP List Price
35003-M0602 6mm x 1/8 11.60 7.7435003-M0604 6mm x 1/4 12.61 8.4035003-M0608 6mm x 1/2 36.51 24.3435003-M0802 8mm x 1/8 20.98 13.9935003-M0804 8mm x 1/4 20.98 13.9935003-M0806 8mm x 3/8 21.20 14.1335003-M1004 10mm x 1/4 13.24 8.8335003-M1006 10mm x 3/8 16.72 11.1435003-M1008 10mm x 1/2 24.80 16.5335003-M1204 12mm x 1/4 16.84 11.2335003-M1206 12mm x 3/8 17.15 11.4335003-M1208 12mm x 1/2 16.64 11.0935003-M1606 16mm x 3/8 34.45 22.9735003-M1608 16mm x 1/2 36.89 24.60
Order Code Tube RRP List Price
35004-M06 6mm 21.09 14.0635004-M08 8mm 21.41 14.2835004-M10 10mm 27.08 18.0635004-M11 11mm 27.01 18.0035004-M12 12mm 27.08 18.0635004-M14 14mm 75.21 50.1435004-M15 15mm 46.94 31.2935004-M16 16mm 42.80 28.53
Order Code Tube x NPT RRP List Price
35005-M0602 6mm x 1/8 (Swivel) 17.92 11.9535005-M0604 6mm x 1/4 14.62 9.7435005-M0606 6mm x 3/8 20.87 13.9235005-M0804 8mm x 1/4 35.66 23.7735005-M0806 8mm x 3/8 49.70 33.1435005-M1004 10mm x 1/4 (Swivel) 63.39 42.2635005-M1006 10mm x 3/8 22.79 15.1935005-M1008 10mm x 1/2 24.86 16.5735005-M1204 12mm x 1/4 23.31 15.5435005-M1206 12mm x 3/8 (Swivel) 37.78 25.1835005-M1208 12mm x 1/2 25.34 16.8935005-M1608 16mm x 1/2 54.38 36.26
Order Code Tube RRP List Price
35011-M06 6mm 23.95 15.9735011-M08 8mm 46.29 30.8635011-M10 10mm 39.64 26.4335011-M11 11mm 74.24 49.4935011-M12 12mm 44.73 29.8235011-M15 15mm 66.33 44.2235011-M16 16mm 63.81 42.54
All prices excluding GSTPage 40
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No FFM12 Male Branch Tee – Non Swivel
No FFM31 Bulkhead Union
Fleetfit Push-In Fittings – Metric
Order Code Tube x NPT RRP List Price
35012-M1204 12mm x 1/4 99.54 66.3635012-M1208 12mm x 1/2 39.85 26.56
No FFM14 Tube Tee
Order Code Tube RRP List Price
35014-M06 6mm 23.21 15.4735014-M08 8mm 32.85 21.9035014-M10 10mm 39.21 26.1435014-M11 11mm 68.03 45.3535014-M12 12mm 46.63 31.0935014-M15 15mm 91.39 60.9235014-M16 16mm 87.73 58.48
Order Code Tube RRP List Price
35031-M06 6mm 40.71 27.1435031-M08 8mm 45.99 30.6635031-M10 10mm 48.11 32.0735031-M12 12mm 59.13 39.4235031-M16* 16mm 135.34 90.23
*While stocks last
All prices excluding GST Page 41
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No FFM12 Male Branch Tee
Fleetfit Push-In Fittings – Metric x Metric
No FFM3 Male Connector
No FFM5 Male Elbow
Order Code Tube x Metric RRP List Price
35003-M06M10 6mm x M10 40.06 26.7135003-M06M12 6mm x M12 39.91 26.6035003-M06M14 6mm x M14 48.64 32.4235003-M06M16 6mm x M16 43.15 28.7735003-M06M22 6mm x M22 41.33 27.5535003-M08M10 8mm x M10 47.05 31.3635003-M08M12 8mm x M12 38.93 25.9635003-M08M14 8mm x M14 42.15 28.1035003-M08M22 8mm x M22 41.99 28.0035003-M10M10 10mm x M10 39.37 26.2435003-M10M12 10mm x M12 39.52 26.3535003-M10M14 10mm x M14 38.16 25.4435003-M10M16 10mm x M16 28.17 18.7835003-M10M22 10mm x M22 42.61 28.4135003-M12M12 12mm x M12 44.85 29.9035003-M12M14 12mm x M14 57.52 38.3535003-M12M16 12mm x M16 39.63 26.4235003-M12M22 12mm x M22 43.80 29.2035003-M15M22 15mm x M22 76.01 50.6835003-M16M16 16mm x M16 47.63 31.7535003-M16M22 16mm x M22 32.49 21.66
Order Code Tube x Metric RRP List Price
35012-M10M12 10mm x M12 68.68 45.7835012-M10M16 10mm x M16 80.96 53.9735012-M10M22 10mm x M22 86.80 57.8735012-M12M16 12mm x M16 82.09 54.7235012-M12M22 12mm x M22 86.95 57.97
Order Code Tube x Metric RRP List Price
35005-M06M10 6mm x M10 61.61 41.0835005-M06M12 6mm x M12 62.26 41.5135005-M06M16 6mm x M16 31.75 21.1735005-M06M22 6mm x M22 44.42 29.6135005-M08M12 8mm x M12 66.67 44.4435005-M08M14 8mm x M14 74.44 49.6335005-M08M16 8mm x M16 59.48 39.6635005-M08M22 8mm x M22 68.91 45.9435005-M10M10 10mm x M10 62.26 41.5135005-M10M12 10mm x M12 71.07 47.3835005-M10M14 10mm x M14 77.14 51.4335005-M10M16 10mm x M16 65.86 43.9135005-M10M22 10mm x M22 66.90 44.6035005-M10M24 10mm x M24 45.27 30.1835005-M12M12 12mm x M12 108.30 72.2035005-M12M14* 12mm x M14 77.10 51.4035005-M12M16 12mm x M16 62.39 41.5935005-M12M22 12mm x M22 67.87 45.2535005-M15M22 15mm x M22 76.01 50.6835005-M16M16 16mm x M16 47.63 31.7535005-M16M22 16mm x M22 65.09 43.39
*While stocks last
All prices excluding GSTPage 42
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No FFM13 Male Run Tee
Fleetfit Push-In Fittings – Metric x Metric
No FF31F Bulkhead Adaptor
Order Code Tube x Metric RRP List Price
35013-M10M14* 10mm x M14 66.20 44.14
35013-M10M16* 10mm x M16 147.62 98.42
Order Code Tube x Metric RRP List Price
35031F-M06M12 6mm x M12 39.44 26.30
*While stocks last
All prices excluding GST Page 43
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1800 Series Air Brake Fittings
QCAB Plug
Order Code Description RRP List Price
1829x4 1/4" QCAB Plug 0.88 0.591829x6 3/8" QCAB Plug 1.04 0.69
QCAB Tube Union
Order Code Description RRP List Price
1862x2.5 5/32" QCAB Tube Union 13.63 9.081862x4 1/4" QCAB Tube Union 13.74 9.161862x6 3/8" QCAB Tube Union 17.47 11.651862x8 1/2" QCAB Tube Union 20.84 13.891862x10 5/8" QCAB Tube Union 25.32 16.88
Encapsulated Catridge
Order Code Description RRP List Price
1861x4 1/4" Encapsulated Cartridge 12.10 8.061861x6 3/8" Encapsulated Cartridge 12.41 8.27
QCAB Tube Tee
Order code Description RRP List Price
1864x4 1/4" QCAB Tube Tee 27.18 18.121864x6 3/8" QCAB Tube Tee 28.24 18.831864x8 1/2" QCAB Tube Tee 49.05 32.70
All prices excluding GSTPage 44
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
QCAB Tube Elbow
QCAB Male Connector
QCAB Female Connector
Order Code Description RRP List Price
1865x4 1/4" QCAB Tube Elbow 17.61 11.741865x6 3/8" QCAB Tube Elbow 22.84 15.221865x8 1/2" QCAB Tube Elbow 27.76 18.51
Order Code Description RRP List Price
1868x2.5x1 5/32 x 1/16 QCAB NPT Male Connector 12.81 8.541868x2.5 5/32 x 1/8 QCAB NPT Male Connector 13.04 8.691868x3 3/16 x 1/8 QCAB NPT Male Connector 13.98 9.321868x4 1/4 x 1/8 QCAB NPT Male Connector 7.85 5.23
1868x4x4 1/4 x 1/4 QCAB NPT Male Connector 8.13 5.421868x4x6 1/4 x 3/8 QCAB NPT Male Connector 10.80 7.201868x6x2 3/8 x 1/8 QCAB NPT Male Connector 9.63 6.421868x6 3/8 x 1/4 QCAB NPT Male Connector 9.69 6.46
1868x6x6 3/8 x 3/8 QCAB NPT Male Connector 9.10 6.071868x6x8 3/8 x 1/2 QCAB NPT Male Connector 11.02 7.341868x8x4 1/2 x 1/4 QCAB NPT Male Connector 11.82 7.881868x8 1/2 x 3/8 QCAB NPT Male Connector 12.34 8.23
1868x8x8 1/2 x 1/2 QCAB NPT Male Connector 13.02 8.681868x10x6 5/8 x 3/8 QCAB NPT Male Connector 25.17 16.781868x10 5/8 x 1/2 QCAB NPT Male Connector 23.76 15.841868x12 3/4 x 1/2 QCAB NPT Male Connector 26.70 17.80
Order Code Tube x Metric RRP List Price
1866x6x2 3/8 x 1/8 QCAB NPT Female Connector 20.04 13.361866x6 3/8 x 1/4 QCAB NPT Female Connector 20.98 13.99
1866x6x6 3/8 x 3/8 QCAB NPT Female Connector 22.12 14.751866x8x4 1/2 x 1/4 QCAB NPT Female Connector 16.79 11.201866x8 1/2 x 3/8 QCAB NPT Female Connector 16.92 11.28
1866x8x8 1/2 x 1/2 QCAB NPT Female Connector 26.23 17.49
1800 Series Airbrake Fittings – Imperial
All prices excluding GST Page 45
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
QCAB Male Elbow
QCAB Male Run Tee
Order Code Description RRP List Price
1869x2.5 5/32 x 1/8 QCAB NPT Male Elbow 13.98 9.321869x3 3/16 x 1/8 QCAB NPT Male Elbow 18.39 12.261869x4 1/4 x 1/8 QCAB NPT Male Elbow 12.04 8.02
1869x4S 1/4 x 1/8 QCAB NPT Swivel Male Elbow 21.55 14.371869x4x4 1/4 x 1/4 QCAB NPT Male Elbow 12.62 8.42
1869x4x4S 1/4 x 1/4 QCAB NPT Swivel Male Elbow 25.00 16.671869x4x6 1/4 x 3/8 QCAB NPT Male Elbow 13.58 9.05
1869x4x6S 1/4 x 3/8 QCAB NPT Swivel Male Elbow 25.17 16.781869x6x2 3/8 x 1/8 QCAB NPT Male Elbow 14.62 9.74
1869x6x2S 3/8 x 1/8 QCAB NPT Swivel Male Elbow 24.84 16.561869x6 3/8 x 1/4 QCAB NPT Male Elbow 12.90 8.60
1869x6S 3/8 x 1/4 QCAB NPT Swivel Male Elbow 20.90 13.941869x6x6 3/8 x 3/8 QCAB NPT Male Elbow 16.11 10.74
1869x6x6S 3/8 x 3/8 QCAB NPT Swivel Male Elbow 29.97 19.981869x6x8 3/8 x 1/2 QCAB NPT Male Elbow 20.61 13.74
1869x6x8S 3/8 x 1/2 QCAB NPT Swivel Male Elbow 33.70 22.461869x8x4 1/2 x 1/4 QCAB NPT Male Elbow 21.71 14.47
1869x8x4S 1/2 x 1/4 QCAB NPT Swivel Male Elbow 43.92 29.281869x8 1/2 x 3/8 QCAB NPT Male Elbow 18.65 12.43
1869x8S 1/2 x 3/8 QCAB NPT Swivel Male Elbow 36.17 24.111869x8x8 1/2 x 1/2 QCAB NPT Male Elbow 21.46 14.31
1869x8x8S 1/2 x 1/2 QCAB NPT Swivel Male Elbow 38.04 25.361869x10x6 5/8 x 3/8 QCAB NPT Male Elbow 32.45 21.631869x10 5/8 x 1/2 QCAB NPT Male Elbow 35.09 23.39
1869x10S 5/8 x1/2 QCAB NPT Swivel Male Elbow 43.48 28.98
QCAB Female Elbow
Order Code Description RRP List Price
1870x4 1/4 x 1/8 QCAB NPT Female Elbow 12.58 8.381870x4x4 1/4 x 1/4 QCAB NPT Female Elbow 17.38 11.591870x6 3/8 x 1/4 QCAB NPT Female Elbow 22.36 14.90
Order Code Description RRP List Price
1871x6S 3/8 x 1/4 QCAB NPT Swivel Male Run Tee 35.60 23.731871x8 1/2 x 3/8 QCAB NPT Male Run Tee 29.29 19.53
1871x8x4S 1/2 x 1/4 QCAB NPT Swivel Male Run Tee 61.65 41.10
1800 Series Airbrake Fittings – Imperial
All prices excluding GSTPage 46
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1800 Series Airbrake Fittings – Imperial
QCAB Male Branch Tee
QCAB Bulkhead Union
Order Code Description RRP List Price
1872x4 1/4 x 1/8 QCAB NPT Male Branch Tee 20.59 13.731872x4x4 1/4 x 1/4 QCAB NPT Male Branch Tee 26.23 17.49
1872x4x4S 1/4 x 1/4 QCAB NPT Swivel Male Branch Tee 46.88 31.251872x6x2S 3/8 x 1/8 QCAB NPT Swivel Male Branch Tee 38.19 25.461872x6S 3/8 x 1/4 QCAB NPT Swivel Male Branch Tee 54.18 36.121872x6x6 3/8 x 3/8 QCAB NPT Male Branch Tee 19.88 13.26
1872x6x6S 3/8 x 3/8 QCAB NPT Swivel Male Branch Tee 41.93 27.951872x8x4 1/2 x 1/4 QCAB NPT Male Branch Tee 34.35 22.90
1872x8x4S 1/2 x 1/4 QCAB NPT Swivel Male Branch Tee 58.68 39.121872x8 1/2 x 3/8 QCAB NPT Male Branch Tee 38.02 25.35
1872x8x8 1/2 x 1/2 QCAB NPT Male Branch Tee 43.62 29.08
Order Code Description RRP List Price
1874x4x4 1/4" QCAB Bulkhead Union 20.59 13.731874x6x6 3/8" QCAB Bulkhead Union 26.62 17.751874x8x8 1/2" QCAB Bulkhead Union 52.78 35.18
QCAB Female Bulkhead Union
Order Code Description RRP List Price
1873x4x4 1/4 x1/4 QCAB NPT Female Bulkhead Union 18.01 12.011873x6x6 3/8 x 3/8 QCAB NPT Female Bulkhead Union 18.32 12.221873x8x8 1/2 x 1/2 QCAB NPT Female Bulkhead Union 36.48 24.32
QCAB Male Elbow 45˚
Order Code Description RRP List Price
1880x4S 1/4 x 1/8 – Swivel 20.80 13.861880x4x4S 1/4 x 1/4 – Swivel 36.63 24.421880x6x2S 3/8 x 1/8 – Swivel 25.17 16.78
1880x6 3/8 x 1/4 14.85 9.901880x6S 3/8 x 1/4 – Swivel 24.30 16.201880x6x6 3/8 x 3/8 16.67 11.111880x6x8 3/8 x 1/2 19.79 13.19
1880x8x4S 1/2 x 1/4 – Swivel 42.86 28.571880x8 1/2 x 3/8 11.49 7.66
1880x8S 1/2 x 3/8 QCAB – Swivel 32.75 21.841880x8x8 1/2 x 1/2 18.23 12.15
1880x8x8S 1/2 x 1/2 – Swivel 35.70 23.801880x10 5/8 x 1/2 28.92 19.281880x12 3/4 x 1/2 35.86 23.91
All prices excluding GST Page 47
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1400 Series Brass Airbrake Fittings – Nylon
Air Brake Nut
Air Brake Union
Air Brake Female Connector
Air Brake Sleeve
Order Code Description RRP List Price
1460x4 1/4" Air Brake Sleeve 0.53 0.351460x6 3/8" Air Brake Sleeve 0.71 0.471460x8 1/2" Air Brake Sleeve 0.87 0.581460x10 5/8" Air Brake Sleeve 1.58 1.051460x12 3/4" Air Brake Sleeve 4.00 2.67
Order Code Description RRP List Price
1462x4 1/4" Air Brake Union 8.14 5.431462x6 3/8" Air Brake Union 11.70 7.801462x8 1/2" Air Brake Union 17.67 11.781462x10 5/8" Air Brake Union 22.26 14.841462x12 3/4" Air Brake Union 36.31 24.21
Order Code Description RRP List Price
1466x4 1/4 x 1/8 NPT Female Connector 6.80 4.531466x6 3/8 x 1/4 NPT Female Connector 11.14 7.43
Order Code Description RRP List Price
1461x4 1/4" Air Brake Nut 1.24 0.821461x6 3/8" Air Brake Nut 1.68 1.121461x8 1/2" Air Brake Nut 2.92 1.951461x10 5/8" Air Brake Nut 3.71 2.471461x12 3/4" Air Brake Nut 4.88 3.25
All prices excluding GSTPage 48
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1400 Series Brass Airbrake Fittings – Nylon
Air Brake Male Connector
Air Brake Union Tee
Air Brake NPT Male Elbow
Order Code Description RRP List Price
1468x4x1 1/4 x 1/16 NPT Male Connector 8.95 5.961468x4 1/4 x 1/8 NPT Male Connector 5.01 3.34
1468x4x4 1/4 x 1/4 NPT Male Connector 6.40 4.261468x4x6 1/4 x 3/8 NPT Male Connector 10.49 6.991468x6x2 3/8 x 1/8 NPT Male Connector 5.65 3.771468x6 3/8 x 1/4 NPT Male Connector 6.69 4.46
1468x6x6 3/8 x 3/8 NPT Male Connector 8.47 5.641468x6x8 3/8 x 1/2 NPT Male Connector 11.37 7.581468x8x4 1/2 x 1/4 NPT Male Connector 10.97 7.311468x8 1/2 x 3/8 NPT Male Connector 10.89 7.26
1468x8x8 1/2 x 1/2 NPT Male Connector 13.72 9.151468x8x12 1/2 x 3/4 NPT Male Connector 21.01 14.011468x10x6 5/8 x 3/8 NPT Male Connector 14.11 9.401468x10 5/8 x 1/2 NPT Male Connector 15.73 10.49
1468x10x12 5/8 x 3/4 NPT Male Connector 26.85 17.901468x12 3/4 x 1/2 NPT Male Connector 25.48 16.98
1468x12x12 3/4 x 3/4 NPT Male Connector 29.60 19.73
Order Code Description RRP List Price
1464x4 1/4" Air Brake Union Tee 18.40 12.271464x6 3/8" Air Brake Union Tee 20.86 13.91
1464x6x6x4 3/8 x 3/8 x 1/4 Air Brake Union Tee 31.21 20.811464x8 1/2" Air Brake Union Tee 29.73 19.82
1464x8x8x6 1/2 x 1/2 x 3/8 Air Brake Union Tee 37.56 25.04
Order Code Description RRP List Price
1469x4 1/4 x 1/8 Air Brake NPT Male Elbow 6.21 4.141469x4x4 1/4 x 1/4 Air Brake NPT Male Elbow 7.34 4.891469x4x6 1/4 x 3/8 Air Brake NPT Male Elbow 14.69 9.801469x6x2 3/8 x 1/8 Air Brake NPT Male Elbow 8.98 5.981469x6 3/8 x 1/4 Air Brake NPT Male Elbow 9.29 6.191469x6L 3/8 x 1/4 Air Brake NPT Male Elbow Long Drop 12.16 8.111469x6x6 3/8 x 3/8 Air Brake NPT Male Elbow 10.09 6.731469x6x8 3/8 x 1/2 Air Brake NPT Male Elbow 15.33 10.221469x8x4 1/2 x 1/4 Air Brake NPT Male Elbow 13.40 8.931469x8 1/2 x 3/8 Air Brake NPT Male Elbow 13.72 9.151469x8L 1/2 x 3/8 Air Brake NPT Male Elbow Long Drop 21.01 14.011469x8x8 1/2 x 1/2 Air Brake NPT Male Elbow 15.33 10.22
1469x10x6 5/8 x 3/8 Air Brake NPT Male Elbow 21.09 14.061469x10 5/8 x 1/2 Air Brake NPT Male Elbow 20.07 13.38
1469x10x12 5/8 x 3/4 Air Brake NPT Male Elbow 72.80 48.531469x12 3/4 x 1/2 Air Brake NPT Male Elbow 36.93 24.62
All prices excluding GST Page 49
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1400 Series Brass Airbrake Fittings – Nylon
Air Brake Female Elbow
Air Brake NPT Male Branch Tee
45˚ Air Brake NPT Male Elbow
Air Brake NPT Male Run Tee
Air Brake NPT Bulkhead Union
Order Code Description RRP List Price
1470x4 1/4 x 1/8 Air Brake NPT Female Elbow 9.42 6.28
Order Code Description RRP List Price
1472x4 1/4 x 1/8 Air Brake NPT Male Branch Tee 13.52 9.011472x6 3/8 x 1/4 Air Brake NPT Male Branch Tee 16.24 10.83
1472x6x6x6 3/8 x 3/8 x 3/8 Air Brake NPT Male Branch Tee 18.83 12.561472x8 1/2 x 3/8 Air Brake NPT Male Branch Tee 32.37 21.58
1472x8x6x6 1/2 x 3/8 x 3/8 Air Brake NPT Male Branch Tee 30.70 20.47
Order Code Description RRP List Price
1480x4 1/4 x 1/8 45˚ Air Brake NPT Male Elbow 10.85 7.231480x4x4 1/4 x 1/4 45˚ Air Brake NPT Male Elbow 13.83 9.221480x6 3/8 x 1/4 45˚ Air Brake NPT Male Elbow 11.08 7.39
1480x6x6 3/8 x 3/8 45˚ Air Brake NPT Male Elbow 19.64 13.091480x8x4 1/2 x 1/4 45˚ Air Brake NPT Male Elbow 20.93 13.961480x8 1/2 x 3/8 45˚ Air Brake NPT Male Elbow 15.82 10.55
1480x8x8 1/2 x 1/2 45˚ Air Brake NPT Male Elbow 18.40 12.271480x10 5/8 x 1/2 45˚ Air Brake NPT Male Elbow 21.38 14.26
Order Code Description RRP List Price
1471x4 1/4 x 1/8 Air Brake NPT Male Run Tee 15.77 10.521471x6 3/8 x 1/4 Air Brake NPT Male Run Tee 15.84 10.56
1471x6x4x4 3/8 x 1/4 x 1/4 Air Brake NPT Male Run Tee 25.85 17.23
Order Code Description RRP List Price
1474x4 1/4 x 1/4 Air Brake NPT Bulkhead Union 20.38 13.591474x6 3/8 x 3/8 Air Brake NPT Bulkhead Union 24.57 16.38
All prices excluding GSTPage 50
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1400 Series Brass Airbrake Fittings – Nylon
Air Brake Insert
Order Code Description RRP List Price
1484x4 1/4" Air Brake Insert 0.31 0.211484x6 3/8" Air Brake Insert 0.40 0.271484x8 1/2" Air Brake Insert 0.76 0.501484x10 5/8" Air Brake Insert 1.25 0.831484x12 3/4" Air Brake Insert 2.24 1.49
All prices excluding GST Page 51
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1300 Series Brass Airbrake Fittings – Copper
1300 Series Air Brake Union
Order Code Description RRP List Price
1362x10 5/8 x 5/8 Air Brake Union 26.00 17.331362x12 3/4 x 3/4 Air Brake Union 46.13 30.761362x4 1/4 x 1/4 Air Brake Union 7.34 4.891362x6 3/8 x 3/8 Air Brake Union 10.52 7.011362x8 1/2 x 1/2 Air Brake Union 18.28 12.18
1300 Series Air Brake NPT Female Connector
1300 Series Air Brake Union Tee
Order Code Description RRP List Price
1366x6x6 3/ x 3/8 Air Brake NPT Fem Conn 9.70 6.47
Order Code Description RRP List Price
1364x8 1/2 Air Brake Union Tee 37.37 24.92
1300 Series Air Brake Nut
1300 Series Air Brake Sleeve
Order Code Description RRP List Price
1361x4 1/4 Air Brake Nut 1.65 1.101361x6 3/8 Air Brake Nut 2.63 1.751361x8 1/2 Air Brake Nut 4.71 3.14
Order Code Description RRP List Price
1360x10 5/8 Air Brake Sleeve 1.76 1.171360x12 3/4 Air Brake Sleeve 2.61 1.741360x4 1/4 Air Brake Sleeve 0.56 0.371360x6 3/8 Air Brake Sleeve 0.56 0.371360x8 1/2 Air Brake Sleeve 0.74 0.49
All prices excluding GSTPage 52
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
1300 Series Brass Airbrake Fittings – Copper
1300 Series Air Brake NPT 45˚ Male Elbow
1300 Series Air Brake NPT Male Tee
Order Code Description RRP List Price
1390x6 3/8 ABS x 1/4 NPT Air Brake ADPT 4.08 2.721390x6x6 3/8 ABS x 3/8 NPT Air Brake ADPT 4.47 2.981390x6x8 3/8 ABS x 1/2 NPT Air Brake ADPT 6.32 4.211390x8 1/2 ABS x 3/8 NPT Air Brake ADPT 4.11 2.74
1300 Series Air Brake NPT Male Connector
Order Code Description RRP List Price
1368x10 5/8 x 1/2 Air Brake NPT M Conn 16.28 10.861368x10x6 5/8 x 3/8 Air Brake NPT M Conn 18.48 12.321368x12 3/4 x 1/2 Air Brake NPT M Conn 27.78 18.52
1368x12x12 3/4 x 3/4 Air Brake NPT M Conn 31.96 21.131368x4 1/4 x 1/8 Air Brake NPT M Conn 4.47 2.98
1368x4x4 1/4 x 1/4 Air Brake NPT M Conn 5.59 3.731368x6 3/8 x 1/4 Air Brake NPT M Conn 6.54 4.36
1368x6x6 3/8 x 3/8 Air Brake NPT M Conn 8.67 5.781368x6x8 3/8 x 1/2 Air Brake NPT M Conn 10.82 7.211368x8 1/2 x 3/8 Air Brake NPT M Conn 10.82 7.21
1368x8x4 1/2 x 1/4 Air Brake NPT M Conn 10.60 7.071368x8x8 1/2 x 1/2 Air Brake NPT M Conn 13.15 8.77
Order Code Description RRP List Price
1380x10 5/8 x 1/2 Air Brake 45D NPT Male 21.77 14.511380x6 3/8 x 1/4 Air Brake 45D NPT Male 10.48 6.98
1380x6x6 3/8 x 3/8 Air Brake 45D NPT Male 19.00 12.671380x8 1/2 x 3/8 Air Brake 45D NPT Male 14.89 9.93
Order Code Description RRP List Price
1372x6 3/8 x 1/4 Air Brake NPT M BR Tee 17.24 11.491372x6x6x6 3/8 x 3/8 x 3/8 Air Brake NPT Male 18.49 12.33
1372x8 1/2 x 3/8 Air Brake NPT M BR Tee 30.76 20.51
Order Code Description RRP List Price
1369x10 5/8 x 1/2 Air Brake NPT M Elbow 20.76 13.841369x10x6 5/8 x 3/8 Air Brake NPT M Elbow 21.17 14.11
1369x4 1/4 x 1/8 Air Brake NPT M Elbow 6.15 4.101369x4x4 1/4 x 1/4 Air Brake NPT M Elbow 7.08 4.721369x6 3/8 x 1/4 Air Brake NPT M Elbow 8.95 5.96
1369x6x2 3/8 x 1/8 Air Brake NPT M Elbow 8.39 5.591369x6x6 3/8 x 3/8 Air Brake NPT M Elbow 9.32 6.211369x6x8 3/8 x 1/2 Air Brake NPT M Elbow 15.03 10.021369x8 1/2 x 3/8 Air Brake NPT M Elbow 13.61 9.07
1369x8x4 1/2 x 1/4 Air Brake NPT M Elbow 12.96 8.641369x8x8 1/2 x 1/2 Air Brake NPT M Elbow 16.11 10.74
1300 Series Air Brake NPT Male Elbow
1300 Series Air Brake ADPT
All prices excluding GST Page 53
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
D.O.T Airbrake Fittings – Imperial
Hose End Sleeve
Male Connector Spring Guard
ABS Female Connector
Hose End Spring
Hose Mender
Order Code Description RRP List Price
33806-A 3/8" Air Brake Hose End Sleeve 4.60 3.07
33808-A 1/2" Air Brake Hose End Sleeve 6.21 4.14
Order Code Description RRP List Price
33806B-Y38 3/8 x 1/2 NPT Male Connector – Spring Guard 21.31 14.20
Order Code Description RRP List Price
33808B-Y78 1/2 X 7/8 Abs Air Brake Female Connector 36.85 24.57
Order Code Description RRP List Price
33806-C 3/8" Air Brake Hose End Spring 4.25 2.8333808-C 1/2" Air Brake Hose End Spring 5.02 3.35
Order Code Description RRP List Price
33808B-Y08 1/2" Air Brake Hose Mender 78.78 52.52
Air Brake Male Connector
Order Code Description RRP List Price
33806B-Y26 3/8 x 3/8 Air Brake NPT Male Connector 20.90 13.9433806B-Y28 3/8 x 1/2 Air Brake NPT Male Connector 18.09 12.0633808B-Y28 1/2 x 1/2 Air Brake NPT Male Connector 33.39 22.26
All prices excluding GSTPage 54
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
D.O.T Airbrake Fittings – Imperial
Swivel NPT Crimp Male
ABS Air Brake Swivel
Swivel NPT Crimp Female
Crimp Collar
Rigid NPT Crimp Male
Order Code Description RRP List Price
33806P-J06 3/8 x 3/8 Air Brake NPT Crimp Male Swivel 26.20 17.47
Order Code Description RRP List Price
33806P-Y76 3/8 x 3/8 ABS Air Brake Swivel 15.60 10.4033808P-Y76 1/2 x 3/8 ABS Air Brake Swivel 10.85 7.2333808P-Y78 1/2 x 1/2 ABS Air Brake Swivel 13.49 8.99
Order Code Description RRP List Price
33806P-406 3/8 x 3/8 Air Brake NPT Crimp Female Swivel 10.98 7.3233808P-408 1/2 x 1/2 Air Brake NPT Crimp Female Swivel 12.64 8.43
Order Code Description RRP List Price
33806P-C00 3/8 Air Brake Crimp Collar 1.44 0.9633808P-C00 1/2 Air Brake Crimp Collar 1.60 1.06
Order Code Description RRP List Price
33806P-104 3/8 x 1/4 Air Brake NPT Crimp Male Rigid 6.84 4.5633806P-108 3/8 x 1/2 Air Brake NPT Crimp Male Rigid 11.29 7.5333808P-106 1/2 x 3/8 Air Brake NPT Crimp Male Rigid 8.33 5.5533808P-108 1/2 x 1/2 Air Brake NPT Crimp Male Rigid 10.40 6.93
All prices excluding GST Page 55
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Pneufit Push-In Fittings
Known as a ‘push-in’ or ‘push-fit’ fitting the Pneufit option allows the tradesman a choice of product that does not require any tools to complete a trouble-free joint.
Because of its compact design and unlimited make and re-make feature, Pneufit is found in the Pneumatic/Robotics sectors.
However, Pneufit can only be used with non-metallic tube in pneumatic applications (should not be used in any hydraulic application.)
• 0-1000kPa Pneufit Composite
• 0-1800kPa Pneufit Brass
• -20˚C – +80˚C
• Body incorporates collet and ‘O’ ring
• Material: Nickel plated 385 Brass Alloy and Nitrile ‘O’ ring
• Pipe Thread BSP: AS IS0 7.1/2 (previously AS 1722.1) Tapered Male (R Series) Parallel Female (Rp Series)
• Material: PBT Polybutylene Terephthalate (Composite)
Nylon
Poly tube
Metal tubes
Low pressure pneumatic applications
AutomationHydraulic applications of any type
1. Cut the tube square using a nylon tube cutter.
2. Slide the tube through the collet into the fitting.
3. Slide the tube firmly through the ‘O’ ring until it rests against the tube stop. Pull on the tubing to ensure a secure joint has been made.
4. To disconnect the tube, push on tube, hold down the collet and withdraw the tube.
Male threads pre-coated with thread sealant.
Style and Description
Working Pressure
Operating Pressure
Construction
Tube
Media / Application
Assembly & Installation
Note
All prices excluding GSTPage 56
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No PF3 Male Connector
No PF5 Male Elbow – Swivel Type
Pneufit Brass Push-In Fittings – Imperial
Order Code Tube x BSPT RRP List Price
20003-0202 1/8 x 1/8 11.28 7.5220003-0302 3/16 x 1/8 7.77 5.1820003-0304 3/16 x 1/4 9.76 6.5120003-0402 1/4 x 1/8 8.20 5.4720003-0404 1/4 x 1/4 7.80 5.20
20003-M0802 5/6 X 1/8 9.76 6.5120003-0604 3/8 x 1/4 10.14 6.7620003-0606 3/8 x 3/8 10.40 6.9320003-0608 3/8 x 1/2 15.45 10.3020003-0804 1/2 x 1/4 19.28 12.8520003-0806 1/2 x 3/8 18.45 12.3020003-0808 1/2 x 1/2 17.52 11.68
No PF4 Tube Union
No PF11 Tube Elbow
Order Code Tube RRP List Price
20004-02 1/8 16.69 11.1220004-03 3/16 10.51 7.0020004-04 1/4 10.15 6.77
20004-M08 5/6 9.76 6.5120004-06 3/8 11.65 7.7720004-08 1/2 16.73 11.15
Order Code Tube x BSPT RRP List Price
20005-0202 1/8 x 1/8 16.69 11.1220005-0302 3/16 x 1/8 14.62 9.7420005-0304 3/16 x 1/4 14.62 9.7420005-0402 1/4 x 1/8 12.67 8.4520005-0404 1/4 x 1/4 12.72 8.48
20005-M0802 5/6 x 1/2 11.48 7.6520005-0604 3/8 x 1/4 19.31 12.8820005-0606 3/8 x 3/8 21.03 14.0220005-0608 3/8 x 1/2 22.71 15.1420005-0804 1/2 x 1/4 38.15 25.4320005-0806 1/2 x 3/8 26.87 17.9120005-0808 1/2 x 1/2 24.63 16.42
Order Code Tube RRP List Price
20011-02 1/8 18.62 12.4120011-03 3/16 13.52 9.0120011-04 1/4 11.97 7.98
20011-M08 5/16 11.65 7.7720011-06 3/8 15.42 10.2820011-08 1/2 18.69 12.46
All prices excluding GST Page 57
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Order Code Tube x BSPT RRP List Price
20012-0202 1/8 x 1/8 24.80 16.5320012-0302 3/16 x 1/8 30.88 20.5920012-0402 1/4 x 1/8 32.78 21.8620012-0404 1/4 x 1/4 32.78 21.86
20012-M0802 5/16 x 1/8 25.28 16.8520012-M0804 5/16 x 1/4 35.80 23.8720012-0604 3/8 x 1/4 42.60 28.4020012-0606 3/8 x 3/8 49.38 32.9220012-0806 1/2 x 3/8 59.13 39.4220012-0808 1/2 x 1/2 61.03 40.69
Pneufit Brass Push-In Fittings – Imperial
No PF12 Male Branch Tee – Swivel Type
No PF14 Tube Tee
No PF13 Male Run Tee – Swivel Type
No PF31 Bulkhead Union
Order Code Tube x BSPT RRP List Price
20013-0202 1/8 x 1/8 27.27 18.1820013-0302 3/16 x 1/8 31.69 21.1320013-0402 1/4 x 1/8 31.69 21.1320013-0404 1/4 x 1/4 31.69 21.13
20013-M0802 5/16 x 1/8 34.96 23.3120013-M0804 1/16 x 1/4 37.90 25.2720013-0604 3/8 x 1/4 61.80 41.2020013-0606 3/8 x 3/8 53.15 35.4320013-0806 1/2 x 3/8 54.43 36.29
Order Code Tube RRP List Price
20014-02 1/8 23.48 15.6620014-03 3/16 16.05 10.7020014-04 1/4 14.01 9.34
20014-M08 5/16 18.20 12.1320014-06 3/8 19.31 12.8820014-08 1/2 23.34 15.56
Order Code Tube RRP List Price
20031-03 3/16 29.94 19.9620031-04 1/4 31.53 21.02
20031-M08 5/16 20.39 13.6020031-06 3/8 41.53 27.6920031-08 1/2 41.53 27.69
All prices excluding GSTPage 58
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Order Code Tube x BSPT RRP List Price
20003-M0402 4mm x 1/8 8.78 5.8520003-M0404 4mm x 1/4 10.29 6.8620003-M04M5 4mm x M5 19.28 12.8520003-M0502 5mm x 1/8 8.31 5.5420003-M0602 6mm x 1/8 9.33 6.2220003-M0604 6mm x 1/4 11.97 7.9820003-M06M5 6mm x M5 19.61 13.0720003-M0802 8mm x 1/8 9.76 6.5120003-M0804 8mm x 1/4 10.69 7.1320003-M0806 8mm x 3/8 10.69 7.1320003-M0808 8mm x 1/2 17.58 11.7220003-M1002 10mm x 1/8 15.68 10.4520003-M1004 10mm x 1/4 16.02 10.6820003-M1006 10mm x 3/8 17.32 11.5520003-M1008 10mm x 1/2 18.65 12.4320003-M1204 12mm x 1/4 18.18 12.1220003-M1206 12mm x 3/8 25.62 17.0820003-M1208 12mm x 1/2 23.41 15.60
No PFM3 Male Connector
No PFM5 Male Elbow – Swivel Type
Pneufit Brass Push-In Fittings – Metric
No PFM4 Tube Union
Order Code Tube RRP List Price
20004-M04 4mm 8.91 5.9420004-M05 5mm 20.78 13.8520004-M06 6mm 9.33 6.2220004-M08 8mm 9.76 6.5120004-M10 10mm 13.24 8.8320004-M12 12mm 19.87 13.25
Order Code Tube x BSPT RRP List Price
20005-M0402 4mm x 1/8 10.18 6.7920005-M0404 4mm x 1/4 12.07 8.0420005-M04M5 4mm x M5 22.37 14.9120005-M0502 5mm x 1/8 20.89 13.9320005-M0602 6mm x 1/8 10.82 7.2120005-M0604 6mm x 1/4 13.77 9.1820005-M06M5 6mm x M5 22.37 14.9120005-M0802 8mm x 1/8 11.48 7.6520005-M0804 8mm x 1/4 11.74 7.8320005-M0806 8mm x 3/8 15.19 10.1220005-M0808 8mm x 1/2 19.31 12.8820005-M1002 10mm x 1/8 17.67 11.7820005-M1004 10mm x 1/4 17.95 11.9720005-M1006 10mm x 3/8 20.02 13.3520005-M1008 10mm x 1/2 21.86 14.5720005-M1204 12mm x 1/4 21.86 14.5720005-M1206 12mm x 3/8 25.62 17.0820005-M1208 12mm x 1/2 21.09 14.06
Order Code Tube RRP List Price
20011-M04 4mm 20.35 13.5720011-M06 6mm 12.67 8.4520011-M08 8mm 11.65 7.7720011-M10 10mm 15.26 10.1820011-M12 12mm 20.05 13.37
No PFM11 Tube Elbow
All prices excluding GST Page 59
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Order Code Tube x BSP RRP List Price
20010-M0402 4mm x 1/8 27.27 18.1820010-M0404 4mm x 1/4 28.80 19.2020010-M0602 6mm x 1/8 14.82 9.8820010-M0604 6mm x 1/4 15.31 10.2120010-M0802 8mm x 1/8 13.94 9.2920010-M0804 8mm x 1/4 18.32 12.2220010-M1004 10mm x 1/4 17.92 11.9520010-M1006 10mm x 3/8 18.80 12.5420010-M1206 12mm x 3/8 63.04 42.0220010-M1208 12mm x 1/2 31.35 20.90
Pneufit Brass Push-In Fittings – Metric
No PFM10 Female Connector
No PFM12 Male Branch Tee – Swivel Type
No PFM13 Male Run Tee – Swivel Type
Order Code Tube x BSPT RRP List Price
20012-M0402 4mm x 1/8 17.35 11.5720012-M0602 6mm x 1/8 16.84 11.2320012-M0604 6mm x 1/4 16.58 11.0520012-M0802 8mm x 1/8 25.28 16.8520012-M0804 8mm x 1/4 35.80 23.8720012-M1004 10mm x 1/4 45.87 30.5820012-M1006 10mm x 3/8 43.68 29.1220012-M1204 12mm x 1/4 50.72 33.8120012-M1206 12mm x 3/8 53.50 35.6720012-M1208 12mm x 1/2 53.50 35.67
Order Code Tube x BSPT RRP List Price
20013-M0402 4mm x 1/8 47.31 31.5420013-M0602 6mm x 1/8 20.22 13.4820013-M0604 6mm x 1/4 19.08 12.7220013-M0802 8mm x 1/8 34.96 23.3120013-M0804 8mm x 1/4 37.90 25.2720013-M1004 10mm x 1/4 48.59 32.3920013-M1006 10mm x 3/8 51.06 34.0420013-M1204 12mm x 1/4 48.48 32.3220013-M1206 12mm x 3/8 48.48 32.3220013-M1208 12mm x 1/2 51.14 34.09
No PFM14 Tube Tee
No PFM31 Bulkhead Union
Order Code Tube RRP List Price
20014-M04 4mm 15.57 10.3820014-M06 6mm 15.57 10.3820014-M08 8mm 18.20 12.1320014-M10 10mm 20.63 13.7520014-M12 12mm 24.81 16.54
Order Code Tube RRP List Price
20031-M04 4mm 20.02 13.3520031-M06 6mm 20.84 13.8920031-M08 8mm 20.39 13.6020031-M10 10mm 23.72 15.8120031-M12 12mm 29.43 19.62
All prices excluding GSTPage 60
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Pneufit Composite Push-In Fittings – Imperial
No PF3C Male Connector
No PF5C Male Elbow – Swivel Type
No PF4C Tube Union
No PF11C Tube Elbow
Order Code Tube x BSPT RRP List Price
20003-0202C 1/8 x 1/8 5.50 3.6720003-0302C 3/16 x 1/8 4.68 3.1220003-0304C 3/16 x 1/4 4.94 3.3020003-0402C 1/4 x 1/8 6.78 4.5220003-0404C 1/4 x 1/4 7.11 4.74
20003-M0802C 5/16 x 1/8 3.99 2.6620003-M0808C 5/16 x 1/2 6.18 4.1220003-0604C 3/8 x 1/4 6.71 4.4720003-0606C 3/8 x 3/8 7.71 5.1420003-0608C 3/8 x 1/2 8.36 5.5720003-0804C 1/2 x 1/4 9.01 6.0020003-0806C 1/2 x 3/8 9.47 6.3120003-0808C 1/2 x 1/2 10.78 7.19
Order Code Tube RRP List Price
20004-02C 1/8 9.50 6.3320004-03C 3/16 6.37 4.2420004-04C 1/4 6.37 4.24
20004-M08C 5/16 5.53 3.6920004-06C 3/8 7.54 5.0320004-08C 1/2 8.99 5.99
Order Code Tube x BSPT RRP List Price
20005-0202C 1/8 x 1/8 8.57 5.7220005-0302C 3/16 x 1/8 6.15 4.1020005-0304C 3/16 x 1/4 6.61 4.4120005-0402C 1/4 x 1/8 9.47 6.3120005-0404C 1/4 x 1/4 10.32 6.88
20005-M0802C 5/16 x 1/8 6.49 4.3320005-M0804C 5/16 x 1/4 6.49 4.3320005-M0806C 5/16 x 3/8 6.54 4.3620005-M0808C 5/16 x 1/2 8.78 5.8520005-0604C 3/8 x 1/4 16.38 10.9220005-0606C 3/8 x 3/8 16.96 11.3120005-0608C 3/8 x 1/2 21.40 14.2720005-0804C 1/2 x 1/4 10.97 7.3120005-0806C 1/2 x 3/8 11.51 7.6720005-0808C 1/2 x 1/2 14.68 9.79
Order Code Tube RRP List Price
20011-02C 1/8 9.04 6.0320011-03C 3/16 5.45 3.6420011-04C 1/4 5.45 3.64
20011-MO8C 5/16 5.64 3.7620011-06C 3/8 8.73 5.8220011-08C 1/2 8.73 5.82
All prices excluding GST Page 61
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Order Code Tube x BSPT RRP List Price
20012-0302C 3/16 x 1/8 9.70 6.4720012-0402C 1/4 x 1/8 13.57 9.0420012-0404C 1/4 x 1/4 14.03 9.35
20012-M0802C 5/16 x 1/8 9.08 6.0620012-M0804C 5/16 x 1/8 9.36 6.2420012-0604C 3/8 x 1/4 19.05 12.7020012-0606C 3/8 x 3/8 19.93 13.2920012-0806C 1/2 x 3/8 20.21 13.4720012-0808C 1/2 x 1/2 22.40 14.94
No PF12C Male Branch Tee – Swivel Type
No PF31C Bulkhead Union
No PF14C Tube Tee
Pneufit Composite Push-In Fittings – Imperial
Order Code Tube RRP List Price
20014-02C 1/8 14.03 9.3520014-03C 3/16 8.99 5.9920014-04C 1/4 8.99 5.99
20014-M08C 5/16 7.29 4.8620014-06C 3/8 9.73 6.4920014-08C 1/2 12.27 8.18
Order Code Tube RRP List Price
20031-03C 3/16 13.87 9.2520031-04C 1/4 13.87 9.25
20031-M08C 5/16 12.45 8.3020031-06C 3/8 23.89 15.9220031-08C 1/2 34.39 22.93
All prices excluding GSTPage 62
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
Order Code Tube x BSPT RRP List Price
20003-M0402C 4mm x 1/8 3.40 2.2720003-M0404C 4mm x 1/4 3.55 2.3720003-M04M5C 4mm x M5 5.99 4.0020003-M0602C 6mm x 1/8 3.68 2.4520003-M0604C 6mm x 1/4 3.83 2.5520003-M06M5C 6mm x M5 6.23 4.1520003-M0802C 8mm x 1/8 3.99 2.6620003-M0804C 8mm x 1/4 4.14 2.7620003-M0806C 8mm x 3/8 4.71 3.1420003-M0808C 8mm x 1/2 6.18 4.1220003-M1002C 10mm x 1/8 6.37 4.2420003-M1004C 10mm x 1/4 6.37 4.2420003-M1006C 10mm x 3/8 6.37 4.2420003-M1008C 10mm x 1/2 6.92 4.6120003-M1204C 12mm x 1/4 7.31 4.8720003-M1206C 12mm x 3/8 7.31 4.8720003-M1208C 12mm x 1/2 7.54 5.03
Pneufit Composite Push-In Fittings – Metric
No PFM3C Male Connector
No PFM4C Tube Union
No PFM11C Tube Elbow
No PFM5C Male Elbow – Swivel Type
Order Code Tube RRP List Price
20004-M04C 4mm 5.02 3.3520004-M06C 6mm 5.07 3.3820004-M08C 8mm 5.53 3.6920004-M10C 10mm 7.00 4.6720004-M12C 12mm 8.50 5.67
Order Code Tube x BSPT RRP List Price
20005-M0402C 4mm x 1/8 4.79 3.1920005-M0404C 4mm x 1/4 5.41 3.6120005-M04M5C 4mm x M5 6.61 4.4120005-M0602C 6mm x 1/8 5.45 3.6420005-M0604C 6mm x 1/4 5.45 3.6420005-M06M5C 6mm x M5 7.65 5.1020005-M0802C 8mm x 1/8 6.49 4.3320005-M0804C 8mm x 1/4 6.49 4.3320005-M0806C 8mm x 3/8 6.54 4.3620005-M0808C 8mm x 1/2 8.78 5.8520005-M1002C 10mm x 1/8 8.78 5.8520005-M1004C 10mm x 1/4 9.01 6.0020005-M1006C 10mm x 3/8 9.12 6.0820005-M1008C 10mm x 1/2 9.47 6.3120005-M1204C 12mm x 1/4 10.24 6.8320005-M1206C 12mm x 3/8 10.32 6.8820005-M1208C 12mm x 1/2 10.43 6.95
Order Code Tube RRP List Price
20011-M04C 4mm 4.91 3.2820011-M06C 6mm 5.16 3.4420011-M08C 8mm 5.64 3.7620011-M10C 10mm 7.76 5.1720011-M12C 12mm 8.50 5.67
All prices excluding GST Page 63
TU
BE
CO
NN
EC
TIO
N F
ITT
ING
S
No PFM12C Male Branch Tee – Swivel Type
No PFM31C Bulkhead Union
No PFM14C Tube Tee
Pneufit Composite Push-In Fittings – Metric
Order Code Tube x BSPT RRP List Price
20012-M0402C 4mm x 1/8 7.31 4.8720012-M0602C 6mm x 1/8 8.03 5.3620012-M0604C 6mm x 1/4 8.34 5.5620012-M0802C 8mm x 1/8 9.08 6.0620012-M0804C 8mm x 1/4 9.36 6.2420012-M1004C 10mm x 1/4 11.51 7.6720012-M1006C 10mm x 3/8 12.17 8.1220012-M1204C 12mm x 1/4 13.91 9.2720012-M1206C 12mm x 3/8 13.91 9.2720012-M1208C 12mm x 1/2 14.37 9.58
Order Code Tube RRP List Price
20014-M04C 4mm 6.41 4.2720014-M06C 6mm 6.49 4.3320014-M08C 8mm 7.29 4.8620014-M10C 10mm 8.03 5.3620014-M12C 12mm 10.24 6.83
Order Code Tube RRP List Price
20031-M04C 4mm 9.24 6.1620031-M06C 6mm 10.97 7.3120031-M08C 8mm 12.45 8.3020031-M10C 10mm 16.15 10.7620031-M12C 12mm 22.06 14.71
All prices excluding GSTPage 64
TH
RE
AD
ED
AD
AP
TO
RS
Threaded Adaptors
Threaded adaptors manufactured to AS IS0 7.1/2 (previously AS 1722.1) are commonly known as Engineering or Sealing Threads. Made with tapered male and parallel female ends, this range can be used to adapt from male to female thread or to re-size a threaded end as required.All TubeFit brand Threaded Adaptors may be used with other BSP threaded products manufactured from brass alloys.
• Material: 352 Grade Brass Alloy (DR)
• Pipe Thread: BSP - AS IS0 7.1/2 (previously AS 1722.1) Tapered Male (R Series) and Parallel Female (RP Series)
• NPT
• Metric x BSP
• Metric x NPT
• Material: 316 Stainless Steel
• Pipe Thread: BSP - AS IS0 7.1/2 (previously AS 1722.1) Tapered Male (R Series) and Parallel Female (RP Series)
• All metric threads x 1.5 pitch
Gas
Potable Water
Air and Hydraulics
Style & Description
Construction
Media/Application
Assembly & Installation1. Tighten fitting to 'spanner firm' position.
(Caution: do not over-tighten)
2. If used in a pneumatic application, apply a soapy solution to the joint to be certain a positive seal has been made. Visually inspect for leaks if used in an hydraulic application
Note:If mating threads manufactured by different companies, Loctite 567 Thread Sealant is recommended even if manufactured to AS IS0 7.1/2 (previously AS 1722.1) - Sealing Threads). It is not good practice to use thread tape with tapered threads.
TubeFit threaded adaptors are able to withstand medium to high pressures. Please use the table below as a guideline.
Working Pressure
Maximum Working Pressure kPa
Pipe Size
Brass Alloy
Hydraulic Pneumatic
1/8 13750 35001/4 13750 35003/8 13750 27501/2 10400 27503/4 7000 20001” 4000 1250
All prices excluding GST Page 65
TH
RE
AD
ED
AD
AP
TO
RS
Threaded Adaptors
• 0˚C - 96˚C
Suitible for domestic, industrial, and agricultural plumbing
Water
Temperature
Media/Application
Pressure • Maximum working pressure 1400kPa - All sizes
• BSPP Threads
• DR Brass Alloy
• Manufactured to comply to Australian Standard
• Water Marked to AS 3688 License WMKA 02387
Construction
Plumbing Style
All prices excluding GSTPage 66
TH
RE
AD
ED
AD
AP
TO
RS
No 24 M & F Reducing Bush
No 25E M & F Extruded Elbow
DZR Brass Adaptors - AS ISO 7.1/2
Order Code BSPT x BSP RRP List Price
01024-0402 1/4 x 1/8 1.93 1.2901024-0602 3/8 x 1/8 2.64 1.7601024-0604 3/8 x 1/4 2.78 1.8501024-0802 1/2 x 1/8 4.65 3.1001024-0804 1/2 x 1/4 4.06 2.7101024-0806 1/2 x 3/8 4.06 2.7101024-1202 3/4 x 1/8 10.94 7.2901024-1204 3/4 x 1/4 7.96 5.3001024-1206 3/4 x 3/8 7.96 5.3001024-1208 3/4 x 1/2 7.96 5.3001024-1606 1 x 3/8 16.27 10.8501024-1608 1 x 1/2 14.00 9.3301024-1612 1 x 3/4 14.00 9.33
Order Code BSPT x BSP RRP List Price
01025-02 1/8 x 1/8 3.48 2.3201025-0204 1/8 x 1/4 8.81 5.8701025-04 1/4 x 1/4 5.52 3.68
01025-0406 1/4 x 3/8 16.69 11.1201025-06 3/8 x 3/8 14.37 9.5801025-08 1/2 x 1/2 15.88 10.59
No 25E 45˚ M & F Extruded Elbow
Order Code BSPT x BSP RRP List Price
01025-4502 1/8 x 1/8 7.23 4.8201025-450204 1/8 x 1/4 7.57 5.0501025-4504 1/4 x 1/4 8.54 5.7001025-4506 3/8 x 3/8 18.46 12.3101025-4508 1/2 x 1/2 20.22 13.48
No 26 Female Hex Socket
Order Code BSP RRP List Price
01026-02 1/8 1.55 1.0301026-04 1/4 2.41 1.6101026-06 3/8 3.86 2.5801026-08 1/2 6.27 4.1801026-12 3/4 9.89 6.5901026-16 1 16.33 10.89
All prices excluding GST Page 67
TH
RE
AD
ED
AD
AP
TO
RS
DZR Brass Adaptors - AS ISO 7.1/2
No 27 Male Hex Nipple
No 28 Male Long Hex Nipple
Order Code BSPT RRP List Price
01027-02 1/8 1.27 0.8401027-04 1/4 2.41 1.6101027-06 3/8 3.86 2.5801027-08 1/2 6.03 4.0201027-12 3/4 11.11 7.4101027-16 1 16.42 10.95
Order Code BSPT x Length RRP List Price
01028-0224 1/8 x 1 1/2 4.09 2.7301028-0232 1/8 x 2 4.34 2.8901028-0424 1/4 x 1 1/2 5.79 3.8601028-0432 1/4 x 2 5.69 3.7901028-0440 1/4 x 2 1/2 7.35 4.9001028-0448 1/4 x 3 8.50 5.67
No 29 Female Reducing Hex Socket
Order Code BSP x BSP RRP List Price
01029-0402 1/4 x 1/8 3.48 2.3201029-0602 3/8 x 1/8 5.08 3.3901029-0604 3/8 x 1/4 3.99 2.6601029-0802 1/2 x 1/8 10.20 6.8001029-0804 1/2 x 1/4 8.28 5.5201029-0806 1/2 x 3/8 8.28 5.5201029-1206 3/4 x 3/8 17.40 11.6001029-1208 3/4 x 1/2 14.26 9.5101029-1612 1 x 3/4 29.74 19.83
No 34 Female Elbow
Order Code BSP RRP List Price
01034-02 1/8 7.03 4.6901034-04 1/4 8.28 5.5201034-06 3/8 12.82 8.5501034-08 1/2 14.21 9.48
No 34 45˚ Female Elbow
Order Code BSP RRP List Price
01034-4502 1/8 12.28 8.1901034-4504 1/4 11.59 7.7301034-4506 3/8 20.47 13.65
All prices excluding GSTPage 68
TH
RE
AD
ED
AD
AP
TO
RS
No 35 Tee
No 48 Male Elbow
No 37 Female Cross
DZR Brass Adaptors - AS ISO 7.1/2
No 64 Solid Male Taper Plug
Order Code BSP RRP List Price
01035-02 1/8 8.51 5.6801035-04 1/4 10.97 7.31
01035-04M 1/4 Male 15.06 10.0401035-04MF 1/4 Male Branch 23.04 15.36
01035-06 3/8 18.74 12.4901035-08 1/2 20.69 13.79
01035-08MF 1/2 Male Branch 35.04 23.36
Order Code BSP RRP List Price
01037-02 1/8 18.17 12.1101037-04 1/4 18.35 12.2401037-06 3/8 34.92 23.2801037-08 1/2 33.68 22.45
Order Code BSPT RRP List Price
01048-02 1/8 x 1/8 8.08 5.3901048-0204 1/8 x 1/4 11.87 7.9101048-04 1/4 x 1/4 8.28 5.5201048-06 3/8 x 3/8 8.98 5.98
01048-0604 3/8 x 1/4 12.44 8.2901048-08 1/2 x 1/2 16.08 10.72
Order Code BSPT RRP List Price
01064-02 1/8 1.11 0.7401064-04 1/4 2.04 1.3601064-06 3/8 2.53 1.6901064-08 1/2 4.60 3.0701064-12 3/4 7.96 5.3001064-16 1 15.43 10.29
No 71 Female Tank Collar
Order Code BSP x Boss Diameter RRP List Price
01071-0208 1/8 x 1/2 3.86 2.5801071-0209 1/8 x 9/16 4.40 2.9401071-0410 1/4 x 5/8 4.08 2.7201071-0614 3/8 x 7/8 9.19 6.1301071-0816 1/2 x 1 7.37 4.91
All prices excluding GST Page 69
TH
RE
AD
ED
AD
AP
TO
RS
No 72 M & F Adaptor
DZR Brass Adaptors - AS ISO 7.1/2
No 73 Male Reducing Nipple
No 74 Female Lock Nut
Order Code BSP x BSPT RRP List Price
01072-0202 1/8 x 1/8 3.14 2.0901072-020224 1/8 x 1/8 x 1 1/2 4.84 3.2201072-0402 1/4 x 1/8 2.29 1.5201072-0404 1/4 x 1/4 3.41 2.2801072-0602 3/8 x 1/8 5.56 3.7101072-0604 3/8 x 1/4 4.73 3.1501072-0606 3/8 x 3/8 4.94 3.3001072-0804 1/2 x 1/4 8.79 5.8601072-0806 1/2 x 3/8 7.60 5.0701072-0808 1/2 x 1/2 7.60 5.0701072-1204 3/4 x 1/4 16.78 11.1901072-1208 3/4 x 1/2 12.30 8.2001072-1608 1 x 1/2 38.08 25.39
Order Code BSPT x BSPT RRP List Price
01073-0402 1/4 x 1/8 2.70 1.8001073-0602 3/8 x 1/8 4.09 2.7301073-0604 3/8 x 1/4 3.49 2.3301073-0804 1/2 x 1/4 5.79 3.8601073-0806 1/2 x 3/8 5.90 3.9301073-1204 3/4 x 1/4 12.56 8.3701073-1206 3/4 x 3/8 13.21 8.8101073-1208 3/4 x 1/2 13.77 9.1801073-1608 1 x 1/2 20.83 13.8801073-1612 1 x 3/4 20.83 13.88
Order Code BSP RRP List Price
01074-02 1/8 1.70 1.1301074-04 1/4 1.82 1.2201074-06 3/8 2.30 1.5301074-08 1/2 3.86 2.5801074-12 3/4 5.79 3.8601074-16 1 8.54 5.70
No 75 Y - Piece
Order Code BSP RRP List Price
01075-02 1/8 Female 24.60 16.4001075-04 1/4 Female 28.91 19.27
01075-M04 1/4 Male 20.15 13.4301075-M06 3/8 Male 25.29 16.86
No 76 Male Breather Cap
Order Code BSPT RRP List Price
01076-02 1/8 11.02 7.3401076-04 1/4 10.12 6.7501076-06 3/8 13.33 8.89
All prices excluding GSTPage 70
TH
RE
AD
ED
AD
AP
TO
RS
M & F Reducing Bush
WaterMarked Screwed Brassware - AS3688
M & F Elbow
Female Hex. Socket
Order Code BSPP x BSPP RRP List Price
27024-0806 1/2 x 3/8 3.82 2.5427024-1208 3/4 x 1/2 3.32 2.2127024-1604 1 x 1/4 (Tapered) 10.49 6.9927024-1606 1 x 3/8 (Tapered) 8.59 5.7327024-1608 1 x 1/2 8.11 5.4127024-1612 1 x 3/4 8.91 5.9427024-2008 1 1/4 x 1/2 17.35 11.5727024-2012 1 1/4 x 3/4 14.06 9.3727024-2016 1 1/4 x 1 13.57 9.0427024-2408 1 1/2 x 1/2 20.72 13.8127024-2412 1 1/2 x 3/4 19.81 13.2027024-2416 1 1/2 x 1 15.88 10.5927024-2420 1 1/2 x 1 1/4 11.71 7.8127024-3208 2 x 1/2 29.36 19.5727024-3212 2 x 3/4 35.10 23.4027024-3216 2 x 1 33.48 22.3227024-3220 2 x 1 1/4 30.87 20.5827024-3224 2 x 1 1/2 23.02 15.3527024-4032 2 1/2 x 2 36.88 24.5927024-4832 3 x 2 69.25 46.1627024-4840 3 x 2 1/2 49.67 33.11
Order Code BSPP x BSP RRP List Price
27025-02 1/8 x 1/8 (Tapered) 3.99 2.6627025-04 1/4 x 1/4 (Tapered) 3.89 2.6027025-06 3/8 x 3/8 (Tapered) 6.41 4.2727025-08 1/2 x 1/2 9.04 6.0327025-12 3/4 x 3/4 10.97 7.3127025-16 1 x 1 32.78 21.8627025-20 1 1/4 x 1 1/4 39.66 26.4427025-24 1 1/2 x 1 1/2 47.85 31.9027025-32 2 x 2 60.61 40.41
Order Code BSPP RRP List Price
27026-04 1/4 1.87 1.2527026-06 3/8 3.37 2.2527026-08 1/2 3.60 2.4027026-12 3/4 5.92 3.9427026-16 1 8.37 5.5827026-20 1 1/4 15.00 10.0027026-24 1 1/2 22.50 15.0027026.32 2 34.61 23.07
Female Hex. Reducing Socket
Order Code BSPP RRP List Price
27029-1208 3/4 x 1/2 6.41 4.2727029-1612 1 x 3/4 12.92 8.61
All prices excluding GST Page 71
TH
RE
AD
ED
AD
AP
TO
RS
All Thread Nipple
WaterMarked Screwed Brassware - AS3688
Order Code BSPP x Length RRP List Price
27028-0406 1/4 x 6 9.15 6.1027028-0412 1/4 x 12 17.75 11.8327028-0606 3/8 x 6 10.74 7.1627028-0612 3/8 x 12 21.15 14.1027028-0802 1/2 x 2 4.56 3.0427028-0806 1/2 x 6 13.67 9.1227028-0812 1/2 x 12 26.70 17.8027028-1206 3/4 x 6 18.82 12.5527028-1212 3/4 x 12 36.76 24.5027028-1606 1 x 6 30.19 20.1327028-1612 1 x 12 61.65 41.1027028-2006 1 1/4 x 6 36.17 24.1127028-2012 1 1/4 x 12 72.18 48.1227028-2406 1 1/2 x 6 39.89 26.5927028-2412 1 1/2 x 12 79.83 53.2227028-3206 2 x 6 56.73 37.8227028-3212 2 x 12 114.01 76.00
Plumbers Cap
F & F Elbow
Order Code BSPP RRP List Price
27033-02 1/8 2.22 1.4827033-04 1/4 2.87 1.9227033-06 3/8 3.43 2.2927033-08 1/2 2.67 1.7827033-12 3/4 3.63 2.4227033-16 1 7.08 4.7227033-20 1 1/4 10.49 6.9927033-24 1 1/2 15.73 10.4927033-32 2 19.25 12.83
Order Code BSPP RRP List Price
27034-02 1/8 3.09 2.0627034-04 1/4 4.25 2.8327034-06 3/8 6.18 4.1227034-08 1/2 8.23 5.4927034-12 3/4 11.51 7.6727034-16 1 21.88 14.5827034-20 1 1/4 32.40 21.6027034-24 1 1/2 38.81 25.8727034-32 2 60.33 40.22
Male Hex. Nipple
Order Code BSPP RRP List Price
27027-08 1/2 3.06 2.0427027-12 3/4 4.99 3.3327027-16 1 8.37 5.5827027-20 1 1/4 12.41 8.2727027-24 1 1/2 19.13 12.7527027-32 2 23.38 15.58
All prices excluding GSTPage 72
TH
RE
AD
ED
AD
AP
TO
RS
Hex. Plug
WaterMarked Screwed Brassware - AS3688
M & F Adaptor
Female Tee
Order Code BSPP RRP List Price
27035-02 1/8 2.94 1.9627035-04 1/4 4.79 3.1927035-06 3/8 6.61 4.4127035-08 1/2 9.08 6.0627035-12 3/4 11.90 7.9327035-16 1 28.29 18.8627035-20 1 1/4 42.50 28.3427035-24 1 1/2 46.55 31.0327035-32 2 71.78 47.85
Order Code BSPP RRP List Price
27064-08 1/2 2.83 1.8827064-12 3/4 4.22 2.8127064-16 1 7.54 5.0327064-20 1 1/4 13.55 9.0327064-24 1 1/2 17.32 11.5527064-32 2 22.34 14.89
Order Code BSPP x BSPP RRP List Price
27072-0808 1/2 x 1/2 3.97 2.6527072-1208 3/4 x 1/2 5.82 3.8827072-1212 3/4 x 3/4 6.13 4.0927072-1608 1 x 1/2 7.88 5.2527072-1612 1 x 3/4 11.80 7.8727072-1616 1 x 1 12.53 8.3527072-2012 1 1/4 x 3/4 15.28 10.1927072-2016 1 1/4 x 1 15.67 10.4427072-2020 1 1/4 x 1 1/4 19.05 12.7027072-2416 1 1/2 x 1 20.73 13.8227072-2420 1 1/2 x 1 1/4 22.91 15.2727072-2424 1 1/2 x 1 1/2 21.15 14.1027072-3220 2 x 1 1/4 31.97 21.3127072-3224 2 x 1 1/2 31.89 21.2627072-3232 2 x 2 32.83 21.89
All prices excluding GST Page 73
TH
RE
AD
ED
AD
AP
TO
RS
Hex. Reducing Nipple
WaterMarked Screwed Brassware - AS3688
Locknut
Order Code BSPP x BSPP RRP List Price
27073-1208 3/4 x 1/2 4.68 3.1227073-1608 1 x 1/2 8.19 5.4627073-1612 1 x 3/4 7.77 5.1827073-2012 1 1/4 x 3/4 12.84 8.5627073-2016 1 1/4 x 1 14.58 9.7227073-2416 1 1/2 x 1 16.59 11.0627073-2420 1 1/2 x 1 1/4 18.18 12.1227073-3220 2 x 1 1/4 26.90 17.9327073-3224 2 x 1 1/2 37.23 24.82
Order Code BSPP RRP List Price
27074-08 1/2 1.59 1.0627074-12 3/4 2.90 1.9427074-16 1 4.40 2.9427074-20 1 1/4 7.29 4.8627074-24 1 1/2 9.61 6.4127074-32 2 10.34 6.89
F & F Union
Order Code BSPP RRP List Price
27085-02 1/8 5.05 3.3727085-04 1/4 6.32 4.2127085-06 3/8 13.26 8.8427085-08 1/2 14.62 9.7427085-12 3/4 20.04 13.3627085-16 1 29.28 19.5227085-20 1 1/4 40.29 26.8627085-24 1 1/2 53.72 35.8127085-32 2 81.84 54.56
M & F Union
Order Code BSPP RRP List Price
27087-02 1/8 6.13 4.0927087-04 1/4 7.03 4.6927087-06 3/8 14.75 9.8427087-08 1/2 14.86 9.9127087-12 3/4 20.56 13.7127087-16 1 28.38 18.9227087-20 1 1/4 45.05 30.0327087-24 1 1/2 64.83 43.2227087-32 2 93.15 62.10
All prices excluding GSTPage 74
TH
RE
AD
ED
AD
AP
TO
RS
No 24SS M & F Reducing Bush
No 25SS M & F Elbow
No 26SS Female Socket
Standard 316 Stainless Steel
No 27SS Male Hex Nipple
Order Code BSPT x BSP RRP List Price
675024-0402 1/4 x 1/8 4.54 3.03675024-0602 3/8 x 1/8 5.21 3.47675024-0604 3/8 x 1/4 5.21 3.47675024-0802 1/2 x 1/8 9.38 6.25675024-0804 1/2 x 1/4 9.38 6.25675024-0806 1/2 x 3/8 9.38 6.25675024-1204 3/4 x 1/4 9.95 6.63675024-1206 3/4 x 3/8 8.34 5.56675024-1208 3/4 x 1/2 8.48 5.65675024-1608 1 x 1/2 11.97 7.98675024-1612 1 x 3/4 11.97 7.98675024-2012 1 1/4 x 3/4 19.28 12.85675024-2016 1 1/4 x 1 19.28 12.85675024-2416 1 1/2 x 1 22.79 15.19675024-2420 1 1/2 x 1 1/4 22.79 15.19675024-3216 2 x 1 42.41 28.27675024-3224 2 x 1 1/2 36.54 24.36
Order Code BSPT x BSP RRP List Price
675025-02 1/8 x 1/8 7.63 5.09675025-04 1/4 x 1/4 6.67 4.45675025-06 3/8 x 3/8 9.13 6.09675025-08 1/2 x 1/2 10.60 7.07675025-12 3/4 x 3/4 13.80 9.20675025-16 1 x 1 20.36 13.58
Order Code BSP RRP List Price
675026-02 1/8 3.92 2.62675026-04 1/4 4.37 2.91675026-06 3/8 4.99 3.33675026-08 1/2 7.23 4.82675026-12 3/4 9.89 6.59675026-16 1 15.14 10.09675026-20 1 1/4 25.15 16.77675026-24 1 1/2 28.51 19.00675026-32 2 41.92 27.94675026-48 3 95.56 63.71
Order Code BSP RRP List Price
675027-02 1/8 5.08 3.39675027-04 1/4 4.99 3.33675027-06 3/8 6.35 4.23675027-08 1/2 8.88 5.92675027-12 3/4 10.04 6.70675027-16 1 14.62 9.74675027-20 1 1/4 21.29 14.19675027-24 1 1/2 24.80 16.53675027-32 2 34.22 22.81
All prices excluding GST Page 75
TH
RE
AD
ED
AD
AP
TO
RS
No 29SS Female Reducing Socket
No 34SS Female Elbow
No 35SS Female Tee
Standard 316 Stainless Steel
No 33SS Female Cap
Order Code BSP x BSP RRP List Price
675029-0402 1/4 x 1/8 5.50 3.67675029-0602 3/8 x 1/8 11.43 7.62675029-0604 3/8 x 1/4 11.43 7.62675029-0802 1/2 x 1/8 8.50 5.67675029-0804 1/2 x 1/4 8.90 5.93675029-0806 1/2 x 3/8 8.90 5.93675029-1206 3/4 x 3/8 11.74 7.83675029-1208 3/4 x 1/2 12.51 8.34675029-1608 1 x 1/2 18.66 12.44675029-1612 1 x 3/4 18.66 12.44
Order Code BSP RRP List Price
675033-02 1/8 3.80 2.53675033-04 1/4 3.80 2.53675033-06 3/8 4.88 3.25675033-08 1/2 5.28 3.52675033-12 3/4 7.42 4.94675033-16 1 11.43 7.62675033-32 2 40.29 26.86
Order Code BSP RRP List Price
675034-02 1/8 5.73 3.82675034-04 1/4 5.73 3.82675034-06 3/8 6.15 4.10675034-08 1/2 7.42 4.94675034-12 3/4 10.51 7.00675034-16 1 18.46 12.31675034-20 1 1/4 29.49 19.66675034-24 1 1/2 35.21 23.47675034-32 2 52.79 35.20
Order Code BSP RRP List Price
675035-02 1/8 7.42 4.94675035-04 1/4 7.63 5.09675035-06 3/8 9.33 6.22675035-08 1/2 12.92 8.61675035-12 3/4 17.81 11.88675035-16 1 24.80 16.53675035-20 1 1/4 35.54 23.69675035-24 1 1/2 45.27 30.18675035-32 2 69.96 46.64
All prices excluding GSTPage 76
TH
RE
AD
ED
AD
AP
TO
RS
No 64SS Male Taper Plug
No 72SS M & F Adaptor
No 73SS Male Reducing Hex Nipple
Standard 316 Stainless Steel
No 74SS Female Lock Nut
Order Code BSPT RRP List Price
675064-02 1/8 4.03 2.69675064-04 1/4 4.03 2.69675064-06 3/8 4.45 2.97675064-08 1/2 7.23 4.82675064-12 3/4 9.98 6.65675064-16 1 12.53 8.35675064-20 1 1/4 17.38 11.59675064-24 1 1/2 26.05 17.37675064-32 2 34.99 23.33675064-40 2 1/2 53.50 35.67
Order Code BSP x BSPT RRP List Price
675072-0402 1/4 x 1/8 16.58 11.05675072-0404 1/4 x 1/4 16.58 11.05675072-0602 3/8 x 1/8 19.93 13.29675072-0604 3/8 x 1/4 19.93 13.29675072-0804 1/2 x 1/4 21.20 14.13675072-0806 1/2 x 3/8 21.20 14.13675072-0808 1/2 x 1/2 21.20 14.13675072-1206 3/4 x 3/8 24.60 16.40675072-1208 3/4 x 1/2 24.60 16.40675072-1608 1 x 1/2 43.48 28.98675072-1612 1 x 3/4 47.37 31.58
Order Code BSPT x BSPT RRP List Price
675073-0402 1/4 x 1/8 6.57 4.38675073-0602 3/8 x 1/8 8.28 5.52675073-0604 3/8 x 1/4 8.28 5.52675073-0804 1/2 x 1/4 10.60 7.07675073-0806 1/2 x 3/8 15.68 10.45675073-1204 3/4 x 1/4 10.60 7.07675073-1206 3/4 x 3/8 12.08 8.05675073-1208 3/4 x 1/2 12.72 8.48675073-1608 1 x 1/2 15.90 10.60675073-1612 1 x 3/4 15.90 10.60675073-2012 1 1/4 x 3/4 37.36 24.91675073-2016 1 1/4 x 1 21.48 14.32675073-2412 1 1/2 x 3/4 30.70 20.47675073-2416 1 1/2 x 1 31.60 21.06675073-2420 1 1/2 x 1 1/4 34.93 23.29
Order Code BSP RRP List Price
675074-02 1/8 6.35 4.23675074-04 1/4 4.03 2.69675074-06 3/8 4.88 3.25675074-08 1/2 7.42 4.94675074-12 3/4 8.05 5.37675074-16 1 12.30 8.20
All prices excluding GST Page 77
TH
RE
AD
ED
AD
AP
TO
RS
No 85SS F & F Union
Standard 316 Stainless Steel
No P3SS Male Hose Tail
Order Code BSP RRP List Price
675085-02 1/8 12.82 8.55675085-04 1/4 12.82 8.55675085-06 3/8 19.93 13.29675085-08 1/2 21.41 14.28675085-12 3/4 33.71 22.47675085-16 1 42.83 28.55675085-24 1 1/2 59.68 39.79
Order Code Hose x BSP RRP List Price
675603-0402 1/4 x 1/8 15.54 10.36675603-0404 1/4 x 1/4 15.54 10.36675603-0604 3/8 x 1/4 14.63 9.75675603-0606 3/8 x 3/8 16.96 11.31675603-0608 3/8 x 1/2 19.37 12.92675603-0804 1/2 x 1/4 18.57 12.38675603-0806 1/2 x 3/8 21.61 14.41675603-0808 1/2 x 1/2 24.44 16.29675603-1208 3/4 x 1/2 31.29 20.86675603-1212 3/4 x 3/4 28.26 18.84675603-1612 1 x 3/4 33.11 22.07675603-1616 1 x 1 34.33 22.89675603-2020 1 1/4 x 1 1/4 39.46 26.31675603-2424 1 1/2 x 1 1/2 44.05 29.37675603-3232 2 x 2 71.58 47.72
All prices excluding GSTPage 78
TH
RE
AD
ED
AD
AP
TO
RS
No 24 Metric x BSP M & F Reducing Bush
No 24 Metric x NPT M & F Reducing Bush
No 26 Metric Female Socket
DZR Metric x BSP/NPT Adaptors
No 64 Metric Male Plug
Order Code Metric Male x BSP RRP List Price
01024-M1402 M14 x 1/8 5.55 3.7001024-M1602 M16 x 1/8 6.54 4.3601024-M1604 M16 x 1/4 6.74 4.4901024-M1804 M18 x 1/4 8.96 5.9701024-M2004 M20 x 1/4 10.46 6.9701024-M2204 M22 x 1/4 11.08 7.3901024-M2206 M22 x 3/8 12.44 8.2901024-M2406 M24 x 3/8 15.36 10.24
Order Code Metric Male x NPT RRP List Price
02024-M1402 M14 x 1/8 5.55 3.7002024-M1602 M16 x 1/8 6.54 4.3602024-M1604 M16 x 1/4 6.74 4.4902024-M2004 M20 x 1/4 10.46 6.9702024-M2204 M22 x 1/4 11.08 7.39
Order Code Metric RRP List Price
01026-M12 M12 4.90 3.2701026-M14 M14 5.89 3.9201026-M16 M16 6.54 4.3601026-M18 M18 7.52 5.0201026-M20 M20 10.74 7.1601026-M22 M22 12.44 8.2901026-M24 M24 16.19 10.79
Order Code Metric RRP List Price
01064-M12 M12 4.90 3.2701064-M14 M14 5.89 3.9201064-M16 M16 6.54 4.3601064-M18 M18 7.52 5.0201064-M20 M20 10.46 6.9701064-M22 M22 12.44 8.2901064-M24 M24 15.36 10.24
No 72 Metric x BSP M & F Adaptor
Order Code Metric x BSP RRP List Price
01072-M1202 M12 x 1/8 5.55 3.7001072-M1404 M14 x 1/4 8.11 5.41
No 72 Metric x NPT M & F Adaptor
Order Code Metric Male x NPT RRP List Price
02072-M1204 M12 x 1/4 6.13 4.0902072-M1604 M16 x 1/4 10.14 6.76
All prices excluding GST Page 79
TH
RE
AD
ED
AD
AP
TO
RS
No 73 Metric x BSP Male Reducing Hex Nipple
DZR Metric x BSP/NPT Adaptors
Order Code Metric Male x BSPT RRP List Price
01073-M1202 M12 x 1/8 6.54 4.3601073-M1204 M12 x 1/4 7.18 4.7901073-M1404 M14 x 1/4 8.82 5.8801073-M1604 M16 x 1/4 10.46 6.9701073-M1804 M18 x 1/4 11.77 7.8501073-M2004 M20 x 1/4 17.66 11.7701073-M2006 M20 x 3/8 17.66 11.7701073-M2206 M22 x 3/8 19.64 13.0901073-M2406 M24 x 3/8 24.53 16.36
All prices excluding GSTPage 80
TH
RE
AD
ED
AD
AP
TO
RS
No 24 NPT M & F Reducing Bush
Order Code NPT X NPT RRP List Price
3220x4x2 1/4 x 1/8 1.50 1.003220x6x2 3/8 x 1/8 2.89 1.933220x6x4 3/8 x 1/4 2.43 1.623220x8x2 1/2 x 1/8 4.03 2.693220x8x4 1/2 x 1/4 3.68 2.453220x8x6 1/2 x 3/8 3.18 2.123220x12x6 3/4 x 3/8 5.39 3.593220x12x8 3/4 x 1/2 6.09 4.06
No 25E NPT M & F Extruded Elbow
Order Code NPT x NPT RRP List Price
3400x2 1/8 x 1/8 2.78 1.853400x4x2 1/8 x 1/4 5.13 3.423400x4 1/4 x 1/4 5.42 3.623400x6 3/8 x 3/8 11.79 7.863400x8 1/2 x 1/2 11.79 7.86
3400x12 3/4 x 3/4 20.50 13.67
No 25E 45˚ NPT M & F Extruded Elbow
Order Code NPT x NPT RRP List Price
3350x2 1/8 x 1/8 11.09 7.403350x4 1/4 x 1/4 6.47 4.323350x6 3/8 x 3/8 9.87 6.583350x8 1/2 x 1/2 16.47 10.983350x12 3/4 x 3/4 25.26 16.84
No 26 NPT Female Hex Socket
Order Code NPT RRP List Price
3300x2 1/8 1.99 1.333300x4 1/4 3.96 2.643300x6 3/8 4.65 3.103300x8 1/2 10.24 6.83
Brass Adaptors - NPT
All prices excluding GST Page 81
TH
RE
AD
ED
AD
AP
TO
RS
No 27 NPT Male Hex Nipple
No 27 BSP x NPT Male Hex Nipple
No 28 NPT Male Long Hex Nipple
No 29 NPT Female Reducing Hex Socket
No 34 NPT Female Elbow
Order Code NPT RRP List Price
3325x2 1/8 1.68 1.123325x4 1/4 2.80 1.863325x6 3/8 4.28 2.853325x8 1/2 7.46 4.97
3325x12 3/4 8.71 5.81
Order Code BSP x NPT RRP List Price
01527-02 1/8 x 1/8 2.77 1.8401527-04 1/4 x 1/4 5.07 3.3801527-06 3/8 x 3/8 7.14 4.76
Order Code NPT x Length RRP List Price
02028-0224 1/8 x 1 1/2 8.00 5.3402028-0232 1/8 x 2 4.79 3.1902028-0432 1/4 x 2 9.04 6.03
Order Code NPT x NPT RRP List Price
3300x4x2 1/4 x 1/8 3.45 2.303300x6x2 3/8 x 1/8 4.09 2.733300x6x4 3/8 x 1/4 5.05 3.373300x8x6 1/2 x 3/8 11.08 7.39
Order Code NPT RRP List Price
3500x2 1/8 4.74 3.163500x4 1/4 6.26 4.173500x6 3/8 9.70 6.473500x8 1/2 15.85 10.57
No 35 NPT Tee
Order Code NPT RRP List Price
3700x2 1/8 4.74 3.163600x2 1/8 x 1/8 Male Branch 4.97 3.323700x4 1/4 6.26 4.173600x4 1/4 x 1/4 Male Branch 8.48 5.653700x6 3/8 10.80 7.203600x6 3/8 x 3/8 Male Branch 11.48 7.653700x8 1/2 19.11 12.743600x8 1/2 x 1/2 Male Branch 17.35 11.57
3700x12 3/4 42.15 28.103600x12 3/4 x 3/4 Male Branch 35.04 23.36
Brass Adaptors - NPT
Other sizes available while stocks last
All prices excluding GSTPage 82
TH
RE
AD
ED
AD
AP
TO
RS
No 35 NPT Male Run Tee
Brass Adaptors - NPT
No 37 NPT Female Cross
No 64 NPT Male Taper Plug
No 72 NPT M & F Adaptor
No 72 NPS x BSPT M & F Adaptor
Order Code NPT RRP List Price
3750x2 1/8 4.65 3.103750x4 1/4 6.54 4.363750x6 3/8 9.04 6.033750x8 1/2 18.83 12.563750x12 3/4 41.00 27.34
Order Code NPT RRP List Price
3950x2 1/8 9.01 6.003950x4 1/4 13.43 8.953950x6 3/8 30.07 20.043950x8 1/2 38.50 25.67
Order Code NPT RRP List Price
3152x2 1/8 1.31 0.883152x4 1/4 1.87 1.253152x6 3/8 3.48 2.323152x8 1/2 4.47 2.98
3152x12 3/4 9.61 6.41
Order Code NPT x NPT RRP List Price
3200x2 1/8 x 1/8 1.96 1.313200x4x2 1/4 x 1/8 4.25 2.833200x4 1/4 x 1/4 4.65 3.10
3200x6x4 3/8 x 1/4 5.52 3.683200x6 3/8 x 3/8 5.45 3.64
3200x8x6 1/2 x 3/8 8.39 5.593200x12x8 3/4 x 1/2 13.18 8.79
Order Code NPS Female x BSPT RRP List Price
01572-0202 1/8 x 1/8 7.59 5.0601572-0404 1/4 x 1/4 13.58 9.0501572-0606 3/8 x 3/8 13.58 9.0501572-0808 1/2 x 1/2 15.19 10.12
No 73 NPT Male Reducing Nipple
Order Code NPT x NPT RRP List Price
3325x4x2 1/4 x 1/8 2.70 1.803325x6x2 3/8 x 1/8 6.43 4.283325x6x4 3/8 x 1/4 4.57 3.053324x8x4 1/2 x 1/4 6.38 4.253324x8x6 1/2 x 3/8 7.18 4.79
All prices excluding GST Page 83
TH
RE
AD
ED
AD
AP
TO
RS
NPT Slotted Plug
NPT Hex Socket Plug
NPT Close Nipple
Order Code NPT RRP List Price
3326x4 1/4 1.71 1.14
Order Code Description RRP List Price
3150x4 1/4" NPT Slotted Plug 1.36 0.913150x6 3/8" NPT Slotted Plug 5.21 3.47
Order Code Description RRP List Price
3153x2 1/8" NPT Hex Socket Plug 5.38 3.58
Order Code Description RRP List Price
3151x2 1/8" NPT Square Head Plug 1.13 0.753151x4 1/4" NPT Square Head Plug 1.76 1.173151x6 3/8" NPT Square Head Plug 2.94 1.963151x8 1/2" NPT Square Head Plug 4.28 2.85
NPT End Cap
NPT Square Head Plug
Brass Adaptors - NPT
Order Code Description RRP List Price
3129x2 1/8" NPT End Cap 3.32 2.213129x4 1/4" NPT End Cap 4.45 2.973129x6 3/8" NPT End Cap 3.92 2.62
Bulkhead Couplings
Order Code Description RRP List Price
1344 1/4 x 1/4 NPT Long 18.20 12.131345 1/4 x 1/4 NPT Short 16.02 10.681346 3/8 x 3/8 NPT 18.92 12.61
All prices excluding GSTPage 84
AIR
LIN
E
Barbed Brass Fittings
TubeFit brand Barbed Airline Fittings are designed to fit into the bore of a hose. A clamping device, hose clip, or 'O' clip is then required to clamp the fitting firmly into place to effect a seal. It should be noted that the clamping / sealing effort is enhanced by the end bulb being larger in diameter than the series of barbs.
Style & Description
• Material: 352 Grade Brass Alloy (DR)
• Pipe Thread: BSP
• Pipe Thread: NPT
Construction
Assembly & Installation1. Tighten fitting to 'spanner firm' position. (Caution: do not over- tighten)
2. Ensure Barb is fully inserted into the hose.
Note: If mating threads manufactured by different companies, Loctite 567 Thread Sealant is recommended even if manufactured to AS IS0 7.1/2 (previously AS 1722.1) - Sealing Threads. It is not good practice to use thread tape with tapered threads.
Media/Application Air
Water
Maximum Pressure• 1000 kPa (145psi)
All prices excluding GST Page 85
AIR
LIN
E
No P3 Male Tailpiece
No SP3 Male Swivel Tailpiece
Barbed Brass Fittings
Order Code Hose x BSPT RRP List Price
06003-0302 3/16 x1/8 2.46 1.6406003-0304 3/16 x 1/4 2.61 1.7406003-0402 1/4 x 1/8 2.46 1.6406003-0404 1/4 x 1/4 2.61 1.7406003-0406 1/4 x 3/8 4.09 2.7306003-0408 1/4 x 1/2 5.90 3.9306003-0502 5/16 x 1/8 2.46 1.6406003-0504 5/16 x 1/4 2.61 1.7406003-0506 5/16 x 3/8 4.09 2.7306003-0508 5/16 x 1/2 5.90 3.9306003-0602 3/8 x 1/8 2.46 1.6406003-0604 3/8 x 1/4 2.49 1.6606003-0606 3/8 x 3/8 4.09 2.7306003-0608 3/8 x 1/2 5.90 3.9306003-0612 3/8 x 3/4 14.00 9.3306003-0802 1/2 x 1/8 3.01 2.0106003-0804 1/2 x 1/4 3.01 2.0106003-0806 1/2 x 3/8 4.09 2.7306003-0808 1/2 x 1/2 5.90 3.9306003-0812 1/2 x 3/4 13.27 8.8506003-1004 5/8 x 1/4 8.76 5.8406003-1006 5/8 x 3/8 5.90 3.9306003-1008 5/8 x 1/2 7.48 4.9906003-1012 5/8 x 3/4 14.00 9.3306003-1206 3/4 x 3/8 9.41 6.2706003-1208 3/4 x 1/2 9.41 6.2706003-1212 3/4 x 3/4 13.27 8.8506003-1216 3/4 x 1 18.03 12.0206003-1608 1 x 1/2 13.27 8.8506003-1612 1 x 3/4 13.27 8.8506003-1616 1 x 1 18.03 12.0206003-2020 1 1/4 x 1 1/4 25.40 16.9306003-2424 1 1/2 x 1 1/2 27.35 18.2306003-2432 1 1/2 x 2 42.87 28.5806003-3224 2 x 1 1/2 42.87 28.5806003-3232 2 x 2 45.78 30.5206003-4040 2 1/2 x 2 1/2 87.17 58.1106003-4848 3 x 3 121.75 81.1606003-6464 4 x 4 203.23 135.49
Order Code Hose x BSPT RRP List Price
06013-0404 1/4 x 1/4 14.96 9.9706013-0606 3/8 x 3/8 17.46 11.6406013-0808 1/2 x 1/2 20.63 13.7506013-1208 3/4 x 1/2 25.72 17.1506013-1212 3/4 x 3/4 24.80 16.53
No P7 Hose Joiner
Order Code Hose RRP List Price
06007-03 3/16 2.53 1.6906007-04 1/4 2.53 1.6906007-05 5/16 2.53 1.6906007-06 3/8 2.77 1.8406007-08 1/2 3.62 2.4106007-10 5/8 6.33 4.2206007-12 3/4 13.27 8.8506007-16 1 16.42 10.95
All prices excluding GSTPage 86
AIR
LIN
E
No P5 Nut & Tail
Barbed Brass Fittings
No P6 Male Elbow
Order Code Hose x BSP RRP List Price
06005-0302 3/16 x 1/8 14.83 9.8906005-0304 3/16 x 1/4 5.64 3.7606005-0404 1/4 x 1/4 2.64 1.7606005-0406 1/4 x 3/8 5.76 3.8406005-0408 1/4 x 1/2 10.89 7.2606005-0504 5/16 x 1/4 3.49 2.3306005-0506 5/16 x 3/8 5.72 3.8106005-0508 5/16 x 1/2 11.62 7.7506005-0604 3/8 x 1/4 5.07 3.3806005-0606 3/8 x 3/8 4.09 2.7306005-0608 3/8 x 1/2 10.20 6.8006005-0806 1/2 x 3/8 8.14 5.4306005-0808 1/2 x 1/2 6.27 4.1806005-1212 3/4 x 3/4 18.08 12.0506005-1616 1 x 1 25.08 16.7206005-2020 1 1/4 x 1 1/4 Lugged 40.53 27.0206005-2424 1 1/2 x 1 1/2 Lugged 80.59 53.7206005-3232 2 x 2 Lugged 88.65 59.10
Order Code Hose x BSPT RRP List Price
06006-0302 3/16 x 1/8 5.19 3.4606006-0304 3/16 x 1/4 5.19 3.4606006-0402 1/4 x 1/8 5.19 3.4606006-0404 1/4 x 1/4 6.27 4.1806006-0406 1/4 x 3/8 9.89 6.5906006-0502 5/16 x 1/8 5.19 3.4606006-0504 5/16 x 1/4 6.27 4.1806006-0506 5/16 x 3/8 9.41 6.2706006-0602 3/8 x 1/8 6.27 4.1806006-0604 3/8 x 1/4 6.27 4.1806006-0606 3/8 x 3/8 9.41 6.2706006-0608 3/8 x 1/2 12.07 8.0406006-0804 1/2 x 1/4 10.40 6.9306006-0806 1/2 x 3/8 9.66 6.4406006-0808 1/2 x 1/2 11.59 7.7306006-0812 1/2 x 3/4 21.95 14.6406006-1004 5/8 x 1/4 14.91 9.9406006-1006 5/8 x 3/8 10.85 7.2306006-1008 5/8 x 1/2 14.24 9.5006006-1208 3/4 x 1/2 16.16 10.7706006-1212 3/4 x 3/4 17.86 11.9106006-1612 1 x 3/4 35.81 23.8806006-1616 1 x 1 62.20 41.47
No P7R Reducing Hose Joiner
Order Code Hose x Hose RRP List Price
06007-0403 1/4 x 3/16 3.55 2.3706007-0504 5/16 x 1/4 3.55 2.3706007-0604 3/8 x 1/4 4.36 2.9006007-0605 3/8 x 5/16 4.36 2.9006007-0805 1/2 x 5/16 4.87 3.2406007-0806 1/2 x 3/8 4.87 3.2406007-1006 5/8 x 3/8 6.75 4.5006007-1008 5/8 x 1/2 6.75 4.5006007-1208 3/4 x 1/2 12.75 8.5006007-1210 3/4 x 5/8 12.75 8.5006007-1612 1 x 3/4 17.75 11.83
Lugged Nut & Tail
All prices excluding GST Page 87
AIR
LIN
E
No P11 Hose Elbow
No P10 Female Tailpiece
Barbed Brass Fittings
Order Code Hose x BSP RRP List Price
06010-0302 3/16 x 1/8 4.67 3.1106010-0304 3/16 x 1/4 6.95 4.6406010-0402 1/4 x 1/8 3.28 2.1806010-0404 1/4 x 1/4 3.28 2.1806010-0406 1/4 x 3/8 5.19 3.4606010-0408 1/4 x 1/2 13.29 8.8606010-0502 5/16 x 1/8 3.28 2.1806010-0504 5/16 x 1/4 3.28 2.1806010-0506 5/16 x 3/8 5.19 3.4606010-0508 5/16 x 1/2 9.73 6.4906010-0602 3/8 x 1/8 3.28 2.1806010-0604 3/8 x 1/4 3.28 2.1806010-0606 3/8 x 3/8 5.19 3.4606010-0608 3/8 x 1/2 8.20 5.4706010-0804 1/2 x 1/4 3.28 2.1806010-0806 1/2 x 3/8 5.19 3.4606010-0808 1/2 x 1/2 8.20 5.4706010-1208 3/4 x 1/2 12.56 8.3706010-1212 3/4 x 3/4 18.34 12.23
Order Code Hose RRP List Price
06011-03 3/16 11.20 7.4706011-04 1/4 11.05 7.3606011-05 5/16 8.78 5.8506011-06 3/8 14.75 9.8406011-08 1/2 21.29 14.1906011-10 5/8 16.10 10.7306011-12 3/4 25.29 16.86
No P12 Male Branch Tee
Order Code Hose x BSPT RRP List Price
06012-0302 3/16 x 1/8 10.51 7.0006012-0402 1/4 x 1/8 10.27 6.8506012-0404 1/4 x 1/4 10.23 6.8206012-0502 5/16 x 1/8 10.35 6.9006012-0504 5/16 x 1/4 10.27 6.8506012-0602 3/8 x 1/8 10.82 7.2106012-0604 3/8 x 1/4 7.49 5.0006012-0606 3/8 x 3/8 13.53 9.0206012-0804 1/2 x 1/4 15.94 10.6306012-0806 1/2 x 3/8 13.53 9.0206012-0808 1/2 x 1/2 18.09 12.0606012-1006 5/8 x 3/8 18.52 12.3506012-1212 3/4 x 3/4 26.50 17.66
All prices excluding GSTPage 88
AIR
LIN
E
No P14 Hose Tee
No P3 Male Tailpiece NPT
Barbed Brass Fittings
No P75 Hose Y - Piece
No P6 Male Elbow NPT
Order Code Hose RRP List Price
06014-03 3/16 6.27 4.1806014-04 1/4 6.27 4.1806014-05 5/16 8.73 5.8206014-06 3/8 6.27 4.1806014-08 1/2 8.88 5.9206014-10 5/8 21.04 14.0306014-12 3/4 26.22 17.4806014-16 1 51.05 24.52
Order Code Hose RRP List Price
06075-03 3/16 35.87 23.9206075-04 1/4 25.29 16.8606075-05 5/16 25.29 16.8606075-06 3/8 18.40 12.2706075-08 1/2 23.01 15.3406075-10 5/8 34.48 22.9906075-12 3/4 36.79 24.52
Order Code Hose x NPT RRP List Price
06103-0302 3/16 x 1/8 2.56 1.7106103-0402 1/4 x 1/8 2.56 1.7106103-0404 1/4 x 1/4 2.56 1.7106103-0502 5/16 x 1/8 2.56 1.7106103-0504 5/16 x 1/4 3.00 2.0006103-0506 5/16 x 3/8 4.09 2.7306103-0602 3/8 x 1/8 2.90 1.9406103-0604 3/8 x 1/4 2.66 1.7706103-0606 3/8 x 3/8 4.09 2.7306103-0608 3/8 x 1/2 5.90 3.9306103-0804 1/2 x 1/4 3.09 2.0606103-0806 1/2 x 3/8 4.09 2.7306103-0808 1/2 x 1/2 5.90 3.9306103-1006 5/8 x 3/8 5.90 3.93
Order Code Hose x NPT RRP List Price
06106-0302 3/16 x 1/8 5.48 3.6606106-0304 3/16 x 1/4 5.48 3.6606106-0402 1/4 x 1/8 5.48 3.6606106-0404 1/4 x 1/4 18.39 12.2606106-0502 5/16 x 1/8 5.48 3.6606106-0504 5/16 x 1/4 6.61 4.4106106-0506 5/16 x 3/8 10.82 7.2106106-0602 3/8 x 1/8 6.61 4.4106106-0604 3/8 x 1/4 8.23 5.4906106-0606 3/8 x 3/8 11.82 7.8806106-0806 1/2 x 3/8 9.66 6.4406106-0808 1/2 x 1/2 11.59 7.7306106-1006 5/8 x 3/8 11.90 7.93
All prices excluding GST Page 89
AIR
LIN
E
No P10 Female Tailpiece
Barb-Tite Inverted Flare Swivel
Barb-Tite SAE Male Tail Piece
Barb-Tite Male Tail Piece
Barb-Tite Inverted Flare Female
Barbed Brass Fittings - NPT
Order Code Hose x NPS Bag Qty RRP List Price
06110-0302 3/16 x 1/8 10 5.72 3.8106110-0404 1/4 x 1/4 10 3.32 2.2106110-0604 3/8 x 1/4 10 3.32 2.2106110-0808 1/2 x 1/2 5 8.20 5.47
Order Code Description RRP List Price
10004B-102 1/4 x 1/8 NPT Male Barb - Tite Tailpiece 3.41 2.2810004B-104 1/4 x 1/4 NPT Male Barb - Tite Tailpiece 5.07 3.3810006B-104 3/8 x 1/4 NPT Male Barb - Tite Tailpiece 4.65 3.1010006B-106 3/8 x 3/8 NPT Male Barb - Tite Tailpiece 10.01 6.6710012B-112 3/4 x 3/4 NPT Male Barb - Tite Tailpiece 22.06 14.71
Order Code Description RRP List Price
10004B-A04 1/4 x 1/4 Inverted Flare Barb - Tite Female Tailpiece 9.01 6.0010004B-A05 1/4 x 5/16 Inverted Flare Barb - Tite Female Tailpiece 7.97 5.3110005B-A05 5/16 x 5/16 Inverted Flare Barb - Tite Female Tailpiece 11.43 7.6210006B-A05 3/8 x 5/16 Inverted Flare Barb - Tite Female Tailpiece 9.70 6.4710008B-A08 1/2 x 1/2 Inverted Flare Barb - Tite Female Tailpiece 15.93 10.62
Order Code Description RRP List Price
10004B-B03 1/4 x 3/16 Inverted Flare Barb - Tite Swivel Tailpiece 9.97 6.6410004B-B04 1/4 x 1/4 Inverted Flare Barb - Tite Swivel Tailpiece 8.23 5.4910005B-B05 5/16 x 5/16 Inverted Flare Barb - Tite Swivel Tailpiece 15.09 10.0610006B-B06 3/8 x 3/8 Inverted Flare Barb - Tite Swivel Tailpiece 11.66 7.7810008B-B08 1/2 x 1/2 Inverted Flare Barb - Tite Swivel Tailpiece 16.92 11.28
Order Code Description RRP List Price
10004B-305 1/4 x 1/4 Sae Barb - Tite Male Tailpiece 10.65 7.10
10005B-305 5/16 x 5/16 Sae Barb - Tite Male Tailpiece 9.41 6.27
Barb-Tite SAE Female Swivel
Order Code Description RRP List Price
10006B-406 3/8 x 3/8 SAE Barb - Tite Female Swivel Tailpiece 8.16 5.44
All prices excluding GSTPage 90
AIR
LIN
E
Barb-Tite Hose Joiner
NPT Female Tail Piece
Barb-Tite Female Swivel
NPT Male Tail Piece
Barbed Brass Fittings - NPT
Order Code Description RRP List Price
10004B-604 1/4 x 1/4 JIC 37° Barb - Tite Female Swivel Tailpiece 6.24 4.1610005B-605 5/6 x 5/6 JIC 37° Barb - Tite Female Swivel Tailpiece 15.00 10.0010006B-606 3/8 x 3/8 JIC 37° Barb - Tite Female Swivel Tailpiece 8.16 5.4410008B-608 1/2 x 1/2 JIC 37° Barb - Tite Female Swivel Tailpiece 8.89 4.0710012B-612 3/4 x 3/4 JIC 37° Barb - Tite Female Swivel Tailpiece 26.14 17.43
Order Code Description RRP List Price
10004B-Y04 1/4 Barb - Tite Hose Joiner 8.87 5.9110006B-Y06 3/8 Barb - Tite Hose Joiner 8.42 5.6110008B-Y08 1/2 Barb - Tite Hose Joiner 11.68 7.79
Order Code Description RRP List Price
10503B-102 3/16 x 1/8 NPT Barbed Male Tailpiece 5.45 3.6410504B-102 1/4 x 1/8 NPT Barbed Male Tailpiece 1.62 1.0810504B-104 1/4 x 1/4 NPT Barbed Male Tailpiece 5.78 3.8510504B-106 1/4 x 3/8 NPT Barbed Male Tailpiece 6.33 4.2210505B-102 5/16 x 1/8 NPT Barbed Male Tailpiece 5.44 3.6310505B-104 5/16 x 1/4 NPT Barbed Male Tailpiece 6.92 4.6110506B-104 3/8 x 1/4 NPT Barbed Male Tailpiece 3.88 2.5910506B-108 3/8 x 1/2 NPT Barbed Male Tailpiece 5.58 3.7210508B-104 1/2 x 1/4 NPT Barbed Male Tailpiece 4.40 2.9410508B-106 1/2 x 3/8 NPT Barbed Male Tailpiece 3.82 2.5410508B-108 1/2 x 1/2 NPT Barbed Male Tailpiece 4.84 3.2210510B-106 5/8 x 3/8 NPT Barbed Male Tailpiece 6.61 4.4110512B-112 3/4 x 3/4 NPT Barbed Male Tailpiece 8.11 5.41
Order Code Description RRP List Price
10506B-206 3/8 x 3/8 NPT Barbed Female Tailpiece 3.79 2.5210508B-208 1/2 x 1/2 NPT Barbed Female Tailpiece 7.82 5.21
057 Series Male Tail Piece
Order Code Description RRP List Price
05703B-102 3/16 x 1/8 NPT Male Tailpiece 3.14 2.0905704B-104 1/4 x 1/4 NPT Male Tailpiece 6.81 4.5405705B-102 5/16 x 1/8 NPT Male Tailpiece 3.11 2.0705705B-104 5/16 x 1/4 NPT Male Tailpiece 2.73 1.8205706B-104 3/8 x 1/4 NPT Male Tailpiece 3.26 2.1705706B-106 3/8 x 3/8 NPT Male Tailpiece 4.47 2.9805710B-106 5/8 x 3/8 NPT Male Tailpiece 12.87 8.5805710B-108 5/8 x 1/2 NPT Male Tailpiece 7.18 4.7905712B-108 3/4 x 1/2 NPT Male Tailpiece 7.12 4.75
All prices excluding GST Page 91
AIR
LIN
E
057 Series Male Elbow
057 Series Inverted Flare Male Tail Piece
057 Series Inverted Flare Male Swivel Elbow
Order Code Description RRP List Price
05704B-C02 1/4 x 1/8 NPT Male Elbow 6.04 4.0305705B-C04 5/16 x 1/4 NPT Male Elbow 7.28 4.8505706B-C04 3/8 x 1/4 NPT Male Elbow 5.87 3.9105706B-C06 3/8 x 3/8 NPT Male Elbow 21.80 14.53
Order Code Description RRP List Price
05705B-1598 5/16 x 1/4 Inverted Flare Male Tailpiece 11.08 7.3905705B-1560 5/16 x 5/16 Inverted Flare Male Tailpiece 9.78 6.5205706B-1568 3/8 x 5/16 Inverted Flare Male Tailpiece 8.82 5.8805706B-1570 3/8 x 3/8 Inverted Flare Male Tailpiece 10.17 6.78
Order Code Description RRP List Price
05705B-B65 5/15 x 5/16 Inverted Flare Male Swivel Elbow 16.32 10.8805706B-B65 3/8 x 5/16 Inverted Flare Male Swivel Elbow 19.17 12.7805706B-B66 3/8 x 3/8 Inverted Flare Male Swivel Elbow 14.57 9.71
Barbed Brass Fittings - NPT
All prices excluding GSTPage 92
AIR
LIN
E
Jamec Pem Couplings & Adaptors
310 & 320 Series One-Way Automatic Sealing In The Coupling
Pneumatic tools, air piping and air pressure equipment
Air
320 Series suitable for water
• Brass
• Nitrile Rubber
Media/Application
Material
Standard Packing Material
1. 310 Series coupling has a single release button.
2. 320 Series coupling has twin release buttons.
3. 31 Series adaptors fit both 310 & 320 series couplings.
4. Different sized couplings and adaptors are interchangeable.
Note
Max Working Pressure• 1050kPa
Operating Temperature• -20˚C to +80˚C
All prices excluding GST Page 93
AIR
LIN
E
Jamec-Pem Couplings & Adaptors
330 Series - One Way Automatic Sealing In the Coupling
Media/Application
Material
Standard Packing Material
Different sized couplings and adaptors are interchangeable.
Note
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C
• 1050kPa
Pneumatic tools, air piping and air pressure equipment
Air
• Brass
• Nitrile Rubber
All prices excluding GSTPage 94
AIR
LIN
E
Jamec Pem Couplings & Adaptors
Different sized couplings and adaptors are interchangeable.
• -20˚C to +80˚C
• 1050kPa
340 Series - One Way Automatic Sealing In The Coupling
Media/Application
Material
Standard Packing Material
Note
Operating Temperature
Max Working Pressure
Pneumatic tools, air piping and air pressure equipment
Air
• Brass
• Nitrile Rubber
All prices excluding GST Page 95
AIR
LIN
E
Jamec-Pem Couplings & Adaptors
Pem 900 Series - One-Way Automatic Sealing In The Coupling
Media/Application
Material
Standard Packing Material
The manufacturer claims Pem 900 Series product interchanges with Ryco 200 series product.
Different sized couplings and adaptors are interchangeable.
Note
Operating Temperature• -20˚C to +80˚C
Pneumatic tools, air piping and air pressure equipment
Air
• Brass
• Nitrile Rubber
All prices excluding GSTPage 96
AIR
LIN
E
310/320 Female Coupling - Sealing
310/320 Hose Coupling - Sealing
31 Female Adaptor - Non Sealing
310/320 Male Coupling - Sealing (320 Series Suitable for Water)
310 Twin Assembly - Sealing
Jamec-Pem Couplings & Adaptors
Order Code Part No BSP RRP List Price
067-310F4 310F4 1/4 23.18 15.45067-310F6 310F6 3/8 29.97 19.98067-310F8 310F8 1/2 29.97 19.98067-320F4 320F4 1/4 35.46 23.64067-320F6 320F6 3/8 41.64 27.76067-320F8 320F8 1/2 41.64 27.76
Order Code Part No BSP RRP List Price
067-310M2 310M2 1/8 32.75 21.84067-310M4 310M4 1/4 25.80 17.20067-310M6 310M6 3/8 25.80 17.20067-310M8 310M8 1/2 29.28 19.52067-320M4 320M4 1/4 37.47 24.98067-320M6 320M6 3/8 37.47 24.98067-320M8 320M8 1/2 41.10 27.40
Order Code Part No Hose RRP List Price
067-310T4 310T4 1/4 26.42 17.61067-310T5 310T5 5/16 26.42 17.61067-310T6 310T6 3/8 26.42 17.61067-310T8 310T8 1/2 26.42 17.61067-320T6 320T6 3/8 40.17 26.78
Order Code Part No RRP List Price
067-310TWT 310TWT 95.60 63.74
Order Code Part No BSP RRP List Price
067-31F2 31F2 1/8 6.45 4.30067-31F4 31F4 1/4 4.53 3.02
067-31F4S 31F4S 1/4 Steel 4.84 3.23067-31F6 31F6 3/8 9.72 6.48
067-31SHF 31SHF Schrader 7.51 5.01
31 Male Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
067-31M2 31M2 1/8 4.90 3.27067-31M4 31M4 1/4 3.51 2.34
067-31M4S 31M4S 1/4 Steel 3.92 2.61067-31M6 31M6 3/8 7.42 4.94
All prices excluding GST Page 97
AIR
LIN
E
31 Hose Adaptor - Non Sealing
One Touch Male Coupling
One Touch Female Coupling
One-Touch Hose Coupling
Jamec-Pem Couplings & Adaptors
Order Code Part No Hose RRP List Price
067-31T3 31T3 3/16 5.16 3.44067-31T4 31T4 1/4 3.62 2.41067-31T5 31T5 5/16 3.62 2.41067-31T6 31T6 3/8 3.62 2.41067-31T8 31T8 1/2 5.05 3.37
Order Code Part No Hose RRP List Price
067-250M4 250M4 1/4 23.99 16.00067-250M6 250M6 3/8 24.07 16.05067-250M8 250M8 1/2 28.71 19.14
Order Code Part No BSP RRP List Price
067-250F4 250F4 1/4 22.62 15.08067-250F6 250F6 3/8 24.95 16.63067-250F8 250F8 1/2 26.60 17.74
Order Code Part No Hose RRP List Price
067-250T6 250T6 3/8 24.77 16.51
330 Female Coupling - Sealing
Order Code Part No BSP RRP List Price
067-330F4 330F4 1/4 41.38 27.58067-330F6 330F6 3/8 46.86 31.24067-330F8 330F8 1/2 46.86 31.24
330 Male Coupling - Sealing
Order Code Part No BSP RRP List Price
067-330M4 330M4 1/4 43.26 28.84067-330M6 330M6 3/8 43.26 28.84067-330M8 330M8 1/2 45.81 30.54
All prices excluding GSTPage 98
AIR
LIN
E
Jamec-Pem Couplings & Adaptors
330 Female Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
067-33F4 33F4 1/4 6.33 4.22067-33F6 33F6 3/8 8.88 5.92067-33F8 33F8 1/2 13.29 8.86
330 Hose Adaptor - Non Sealing
Order Code Part No Hose RRP List Price
067-33T6 33T6 3/8 7.39 4.92067-33T8 33T8 1/2 8.08 5.39
340 Female Coupling - Sealing
Order Code Part No BSP RRP List Price
067-340F6 340F6 3/8 78.22 52.15067-340F8 340F8 1/2 78.22 52.15
330 Male Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
067-33M4 33M4 1/4 6.26 4.17067-33M6 33M6 3/8 8.70 5.80067-33M8 33M8 1/2 10.71 7.14
Order Code Part No BSP RRP List Price
067-34M4 34M4 1/4 9.81 6.54067-34M6 34M6 3/8 10.35 6.90067-34M8 34M8 1/2 13.47 8.98
340 Male Coupling - Sealing
Order Code Part No BSP RRP List Price
067-340M6 340M6 3/8 78.22 52.15067-340M8 340M8 1/2 78.22 52.15
340 Male Adaptor - Non Sealing
All prices excluding GST Page 99
AIR
LIN
E
Jamec-Pem Couplings & Adaptors
Hurricane Euro - Male Coupling
Hurricane Euro - Female Coupling
Hurricane Euro - Hose Coupling
Hurricane Euro - Male Adaptor
Order Code Part No BSP RRP List Price
067-590F4 590F4 1/4 31.29 20.86067-590F8 590F8 1/2 33.81 22.54
Order Code Part No BSP RRP List Price
067-590M4 590M4 1/4 31.29 20.86067-590M6 590M6 3/8 31.29 20.86067-590M8 590M8 1/2 33.91 22.61
Order Code Part No Hose RRP List Price
067-590T4 590T4 1/4 31.29 20.86067-590T5 590T5 5/16 31.29 20.86
Order Code Part No BSP RRP List Price
067-59M4 59M4 1/4 7.23 4.82
Hurricane Euro - Female Adaptor
Order Code Part No BSP RRP List Price
067-59F4 59F4 1/4 7.23 4.82
340 Hose Adaptor - Non Sealing
Order Code Part No Hose RRP List Price
067-34T6 34T6 3/8 9.24 6.16067-34T8 34T8 1/2 10.09 6.73
Hurricane Euro Interchanges with CEJN Equivalent
All prices excluding GSTPage 100
AIR
LIN
E
Hurricane Euro - Hose Adaptor
Order Code Part No Hose RRP List Price
067-59T4 59T4 1/2 7.39 4.92067-59T5 59T5 5/16 7.39 4.92067-59T6 59T6 3/8 8.62 5.75
900 Female Coupling - Sealing
900 Male Coupling - Sealing
900 Female Adaptor - Non Sealing
900 Hose Coupling - Sealing
900 Male Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
72900 F900 1/4 20.93 13.9672907 F907 3/8 24.61 16.4172909 F909 1/2 27.73 18.49
Order Code Part No Hose RRP List Price
72910 F910 1/4 24.61 16.4172911 F911 5/16 24.61 16.4172912 F912 3/8 24.61 16.4172913 F913 1/2 24.61 16.41
Order Code Part No BSP RRP List Price
72901 F901 1/4 22.53 15.0272908 F908 3/8 24.61 16.41
Order Code Part No BSP RRP List Price
72955 F955 1/8 6.03 4.0272903 F903 1/4 4.16 2.77
72903S F903S 1/4 Steel 3.41 2.2872917 F917 Schrader 4.92 3.28
Order Code Part No BSP RRP List Price
72904 F904 1/8 3.75 2.5072902 F902 1/4 3.74 2.49
72902S F902S 1/4 Steel 3.15 2.1072914 F914 3/8 5.34 3.56
Jamec-Pem Couplings & Adaptors
All prices excluding GST Page 101
AIR
LIN
E
Jamec-Pem Couplings & Adaptors
900 Hose Adaptor - Non Sealing
Order Code Part No Hose RRP List Price
72905 F905 1/4 3.80 2.5372906 F906 5/16 3.80 2.53
72906A F906A 3/8 3.85 2.5772915 F915 1/2 5.63 3.75
All prices excluding GSTPage 102
AIR
LIN
E
Nitto Couplings & Adaptors
Hi Coupler Series - One Way Automatic Sealing in the Coupling
Media/Application
Material
Standard Packing Material
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C
• 1960kPa
00 Series does not interchange with 0 series.
Note
Pneumatic tools, air piping and air pressure equipment
Air
• Steel (chrome plated)
• Stainless Steel
• Nitrile butadiene rubber
All prices excluding GST Page 103
AIR
LIN
E
Nitto Couplings & Adaptors
TSP Coupler Series - Non-Sealing Coupling and Adaptor
Media/Application
Material
Standard Packing Material
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C (FKM -20˚C to +180˚C)
• 7350kPa
Different sized couplings and adaptors are NOT interchangeable.
Note
Water piping, (including sea water), hydraulic equipment
Petrol
Fuel Oil
Kerosene
Water
• Brass
• Nitrile butadiene rubber - NBR
• Fluoro Rubber - FKM (x-1000
All prices excluding GSTPage 104
AIR
LIN
E
Nitto Couplings & Adaptors
SP Coupler Series - Type A Two-Way Automatic Sealing in the Coupling and Adaptor
Salty water transfer, steam, chemicals
Steam Piping
Chemicals
Media/Application - Brass
Media/Application - Stainless Steel
Standard Packing Material
Operating Temperature-20˚C to +80˚C (Viton -20˚C to +180˚C)
Different sized couplings and adaptors are NOT interchangeable.
Note
Max Working Pressure• 7350kPa
Water transfer, oxygen/acetylene piplines
Air
Water
Oxygen
Acetylene
• Nitrile butadiene rubber
• Fluoro Rubber - FKM (x-100)
All prices excluding GST Page 105
AIR
LIN
E
Hi-Coupler Female Coupling - Sealing
Hi-Coupler Male Coupling - Sealing
Hi-Coupler Female Adaptor - Non Sealing
Nitto Couplings & Adaptors
Hi-Coupler Hose Coupling - Sealing
Hi-Coupler Hose Adaptor - Non Sealing
Hi-Coupler Male Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
06N20SF 20SF 1/4 16.15 10.7606N30SF 30SF 3/8 17.84 11.9006N40SF 40SF 1/2 22.09 14.7306N400SF 400SF 1/2 64.24 42.8306N600SF 600SF 3/4 67.13 44.7506N800SF 800SF 1 84.30 56.20
Order Code Part No Hose RRP List Price
06N20SH 20SH 1/4 16.15 10.7606N30SH 30SH 3/8 17.84 11.9006N40SH 40SH 1/2 19.37 12.9206N400SH 400SH 1/2 64.24 42.8306N600SH 600SH 3/4 67.13 44.7506N800SH 800SH 1 84.30 56.20
Order Code Part No BSP RRP List Price
06N20SM 20SM 1/4 16.15 10.7606N30SM 30SM 3/8 17.84 11.9006N40SM 40SM 1/2 19.37 12.92
06N400SM 400SM 1/2 64.24 42.8306N600SM 600SM 3/4 67.13 44.7506N800SM 800SM 1 84.30 56.20
Order Code Part No BSP RRP List Price
06N20PF 20PF 1/4 5.61 3.7406N30PF 30PF 3/8 6.97 4.6506N40PF 40PF 1/2 12.24 8.1606N400PF 400PF 1/2 24.62 16.4306N600PF 600PF 3/4 32.12 21.41
Order Code Part No Hose RRP List Price
06N20PH 20PH 1/4 5.61 3.7406N30PH 30PH 3/8 6.97 4.6506N40PH 40PH 1/2 9.18 6.1206N400PH 400PH 1/2 24.64 16.4306N600PH 600PH 3/4 32.12 21.41
Order Code Part No BSP RRP List Price
06N20PM 20PM 1/4 5.61 3.7406N30PM 30PM 3/8 6.97 4.6506N40PM 40PM 1/2 9.18 6.1206N400PM 400PM 1/2 24.64 16.4306N600PM 600PM 3/4 32.12 21.4106N800PM 800PM 1 50.48 33.65
All prices excluding GSTPage 106
AIR
LIN
E
TSP Female Coupling - Non Sealing
TSP Hose Coupling - Non Sealing
Nitto Couplings & Adaptors
TSP Male Coupling - Non Sealing
TSP Hose Adaptor - Non Sealing
TSP Female Adaptor - Non Sealing
TSP Male Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
06N2TSF 2TSF 1/4 44.80 29.8706N3TSF 3TSF 3/8 52.31 34.8706N4TSF 4TSF 1/2 70.83 47.2206N6TSF 6TSF 3/4 118.39 78.9206N8TSF 8TSF 1 254.29 169.53
Order Code Part No Hose RRP List Price
06N2TSH 2TSH 1/4 44.80 29.8706N3TSH 3TSH 3/8 52.31 34.8706N4TSH 4TSH 1/2 83.60 55.7306N6TSH 6TSH 3/4 159.43 106.2906N8TSH 8TSH 1 254.29 169.53
Order Code Part No BSP RRP List Price
06N2TSM 2TSM 1/4 44.80 29.8706N3TSM 3TSM 3/8 52.31 34.8706N4TSM 4TSM 1/2 83.60 55.7306N6TSM 6TSM 3/4 159.43 106.2906N8TSM 8TSM 1 254.29 169.53
Order Code Part No BSP RRP List Price
06N2TPF 2TPF 1/4 13.27 8.8406N3TPF 3TPF 3/8 18.02 12.0106N4TPF 4TPF 1/2 38.04 25.3606N6TPF 6TPF 3/4 51.06 34.0406N8TPF 8TPF 1 87.10 58.07
Order Code Part No Hose RRP List Price
06N2TPH 2TPH 1/4 13.27 8.8406N3TPH 3TPH 3/8 18.52 12.3506N4TPH 4TPH 1/2 32.54 21.6906N6TPH 6TPH 3/4 52.06 34.7106N8TPH 8TPH 1 111.13 74.09
Order Code Part No BSP RRP List Price
06N2TPM 2TPM 1/4 13.27 8.8406N3TPM 3TPM 3/8 18.02 12.0106N4TPM 4TPM 1/2 32.54 21.6906N6TPM 6TPM 3/4 51.06 34.0406N8TPM 8TPM 1 87.10 58.07
All prices excluding GST Page 107
AIR
LIN
E
SP Female Coupler BSP - Sealing
Nitto Couplings & Adaptors
SP Female Adaptor BSP - Sealing
Oxy Acetylene Female Coupling - Sealing
Oxy Acetylene Hose Coupling - Sealing
Order Code Part No BSP RRP List Price
06N1SB 1S 1/8 59.07 39.3806N2SB 2S 1/4 66.08 44.0506N3SB 3S 3/8 113.63 75.7506N4SB 4S 1/2 183.46 122.3106N6SB 6S 3/4 299.85 199.90
06N1S-SS 1S-SS 1/8 184.55 123.0306N2S-SS 2S-SS 1/4 204.64 136.4206N3S-SS 3S-SS 3/8 262.88 175.2506N4S-SS 4S-SS 1/2 401.70 267.8006N6S-SS 6S-SS 3/4 950.85 633.90
Order Code Part No BSP RRP List Price
06N1PB 1P 1/8 25.78 17.1906N2PB 2P 1/4 29.78 19.8606N3PB 3P 3/8 44.80 29.8706N4PB 4P 1/2 83.35 55.5606N6PB 6P 3/4 135.66 90.44
06N1P-SS 1P-SS 1/8 57.24 38.1606N2P-SS 2P-SS 1/4 68.29 45.5306N3P-SS 3P-SS 3/8 82.86 55.2406N4P-SS 4P-SS 1/2 179.53 119.6906N6P-SS 6P-SS 3/4 264.89 176.59
Order Code Part No UNF RRP List Price
06N22SF 22SF OXY 5/8 UNF 80.85 53.9006N33SF 33SF ACET 5/8 UNFLH 83.55 55.70
Order Code Part No Hose RRP List Price
06N22SH 22SH OXY 6mm 61.10 40.7406N32SH 32SH ACET 6mm 65.43 43.62
Oxy Acetylene Female Adaptor - Non Sealing
Order Code Part No UNF RRP List Price
06N22PF 22PF OXY 5/8 UNF 29.20 19.4706N33PF 33PF ACET 5/8 UNFLH 29.20 19.47
All prices excluding GSTPage 108
AIR
LIN
E
Oxy Acetylene Hose Adaptor - Non Sealing
200 Series Hi-Cupla One Touch - Sealing - Female Cupla
Nitto Couplings & Adaptors
200 Series Hi-Cupla One Touch - Sealing - Male Cupla
Twist Plug - Non Sealing - Male Adaptor
200 Series Hi-Cupla One Touch - Sealing - Hose Cupla
Twist Plug - Non Sealing - Female Adaptor
Order Code Part No Hose RRP List Price
06N22PH 22PH OXY 6mm 17.30 11.5406N32PH 32PH ACET 6mm 18.93 12.62
Order Code Part No BSP RRP List Price
06N200-20SF 200-20SF 1/4 24.06 16.0406N200-30SF 200-30SF 3/8 26.13 17.4206N200-40SF 200-40SF 1/2 37.73 25.15
Order Code Part No BSP RRP List Price
06N200-20SM 200-20SM 1/4 24.06 16.0406N200-30SM 200-30SM 3/8 26.13 17.4206N200-40SM 200-40SM 1/2 28.37 18.91
Order Code Part No Hose RRP List Price
06N200-20SH 200-20SH 1/4 24.06 16.0406N200-30SH 200-30SH 3/8 26.13 17.4206N200-40SH 200-40SH 1/2 28.37 18.91
Order Code Part No BSP RRP List Price
06NTS-10PM TS-10PM 1/8 113.25 75.5006NTS-20PM TS-20PM 1/4 113.25 75.5006NTS-30PM TS-30PM 3/8 113.25 75.50
Order Code Part No BSP RRP List Price
06NTS-20PFF TS-20PFF 1/4 113.25 75.50
All prices excluding GST Page 109
AIR
LIN
E
250 Series Hose Hi Cupla - Sealing
Nitto Couplings & Adaptors
250 Series Male Hi Cupla - Sealing
250 Series Hi-Cupla Adaptor - Non Sealing
250 Series Adaptors - Non Sealing
Hi-Cupla Safety Lock - Sealing - Male Cupla
Order Code Part No Hose RRP List Price
06N250-50SNG HA-50SNG 5mm x 8mm 37.56 25.0406N250-85SNG HA-85SNG 8.5mm x 12.5mm 37.56 25.04
Order Code Part No BSP RRP List Price
06N250-20SM HA-20SM 1/4 37.56 25.04
Order Code Part No Hose RRP List Price
06N250-65PNG HA-65PNG 6.5mm x 10mm 16.07 10.71
Order Code Part No BSP RRP List Price
06N250-20PM HA-20PM 1/4 M 16.56 11.0406N250-20PFF HA-20PFF 1/4 F 16.56 11.04
Order Code Part No BSP RRP List Price
06NL20SM L-20SM 1/4 49.52 33.0206NL40SM L-40SM 1/2 51.76 34.51
Hi-Cupla Safety Lock - Sealing - Hose Cupla
Order Code Part No Hose RRP List Price
06NL20SH L-20SH 1/4 49.52 33.0206NL30SH L-30SH 3/8 49.52 33.0206NL40SH L-40SH 1/2 51.76 34.51
All prices excluding GSTPage 110
AIR
LIN
E
Hi-Cupla Safety Lock - Sealing - Female Cupla
Hi-Cupla Safety Lock - Ball Lock Type - Hose Cupla
Nitto Couplings & Adaptors
Hi-Cupla Safety Lock - Ball Lock Type - Male Cupla
Manifolds "One Touch Cuplas"
Hi-Cupla Safety Lock - Ball Lock Type - Female Cupla
Dusta Hi-Cupla - Sealing
Order Code Part No BSP RRP List Price
06NL20SF L-20SF 1/4 49.52 33.0206NL30SF L-30SF 3/8 49.52 33.0206NL40SF L-40SF 1/2 54.75 36.50
Order Code Part No Hose RRP List Price
06NL400SH 400SH Lock 1/2 70.61 47.0706NL600SH 600SH Lock 3/4 74.62 49.7506NL800SH 800SH Lock 1 92.47 61.65
Order Code Part No BSP RRP List Price
06NL400SM 400SM Lock 1/2 70.61 47.0706NL600SM 600SM Lock 3/4 74.62 49.7506NL800SM 800SM Lock 1 92.47 61.65
Order Code Part No BSP RRP List Price
06NL400SF 400SF Lock 1/2 70.61 47.0706NL600SF 600SF Lock 3/4 74.62 49.7506NL800SF 800SF Lock 1 92.47 61.65
Order Code Part No RRP List Price
06NMAN2WAY 2 Way Manifold 61.65 41.1006NMAN3WAY 3 Way Manifold 79.41 52.94
Order Code Part No BSP RRP List Price
06NDCS-20PH DCS-20PH 1/4 126.51 84.3406NDCS-30PH DCS-30PH 3/8 126.51 84.3406NDCS-40PH DCS-40PH 1/2 126.51 84.34
All prices excluding GST Page 111
AIR
LIN
E
Dusta Hi-Cupla - Sealing
Nitto Couplings & Adaptors
Purge Hi-Cupla - Sealing
Purge Plug - Non Sealing - Hose Adaptor
Purge Plug - Non Sealing - Hose Plug
Order Code Part No Hose RRP List Price
06NDCS-65PNG DCS-65PNG 6.5mm x 10mm 126.51 84.3406NDCS-85PNG DCS-85PNG 8.5mm x 12.5mm 126.51 84.34
Rotary Nut Cupla - Sealing
Order Code Part No BSP RRP List Price
06NPV-20SM PV-20SM 1/4 188.94 125.9606NPV-30SM PV-30SM 3/8 188.94 125.9606NPV-40SM PV-40SM 1/2 201.08 134.06
Order Code Part No Hose RRP List Price
06NPV-20PH PV-20PH 1/4 45.97 30.6506NPV-30PH PV-30PH 3/8 45.97 30.6506NPV-40PH PV-40PH 1/2 45.97 30.65
Order Code Part No Hose RRP List Price
06NPV-65PN PV-65PN 6.5mm x 10mm 45.97 30.6506NPV-85PN PV-85PN 8.5mm x 12.5mm 45.97 30.65
Order Code Part No Hose RRP List Price
06N20SNR 20SNR 6.5mm x 10mm 52.89 35.26
Rotary Plug - Non Sealing - Male
Order Code Part No BSP RRP List Price
06NRL20PM RL-20PM 1/4 38.50 25.6706NRL30PM RL-30PM 3/8 38.50 25.67
45.97
All prices excluding GSTPage 112
AIR
LIN
E
Rotary Plug - Non Sealing - Female
Micro Cupla - Sealing
Nitto Couplings & Adaptors
Micro Plug Hose - Non Sealing
Small Cupla Hose - Sealing
Micro Plug Male - Non Sealing
Small Cupla Female - Sealing
Order Code Part No BSP RRP List Price
06NRL20PFF RL-20PFF 1/4 38.50 25.67
Order Code Connection RRP List Price
06NMC04SH 4mm Hose 37.98 25.3206NMC04SHL 90 deg 4mm Hose 45.11 30.0806NMC05SM M5 x 0.8 Male 43.00 28.6606NMC10SM 1/8 NPT Male 43.00 28.6606NMC04SHB Panel Mount4mm Hose 54.20 36.13
Order Code Hose RRP List Price
06NMC04PH 4mm Hose 8.23 5.4806NMC04PHL 90 deg 4mm Hose 25.23 16.82
Order Code Connection RRP List Price
06NMC05PM M5 x 0.8 Male 9.34 6.2306NMC10PM 1/8 NPT 11.78 7.85
Order Code Connection RRP List Price
06NMS40SN 4.0 x 6.0 Nylon 61.86 41.2406NMS45SN 4.5 x 6.0 Hose 61.86 41.24
Order Code NPT RRP List Price
06NMS10SF 1/8 NPT Fem 54.20 36.13
All prices excluding GST Page 113
AIR
LIN
E
Small Cupla Male - Sealing
Nitto Couplings & Adaptors
Small Plug Female - Non Sealing
Order Code NPT RRP List Price
06NMS10SM 1/8 NPT Male 50.83 33.8806NMS20SM 1/4 NPT Male 53.26 35.51
Order Code NPT RRP List Price
06NMS10PF 1/8 NPT Fem 12.15 8.10
Small Plug Male - Non Sealing
Order Code NPT RRP List Price
06NMS10PM 1/8 NPT Male 11.32 7.5506NMS20PM 1/4 NPT Male 12.33 8.22
Small Plug Hose - Non Sealing
Order Code Connection RRP List Price
06NMS40PN 4.0 x 6.0 Nylon 21.12 14.0806NMS45PN 4.5 x 6.0 Hose 21.12 14.08
All prices excluding GSTPage 114
AIR
LIN
E
Ryco Couplings & Adaptors
200 & 200S Series - One-Way Automatic Sealing In The Coupling
Media/Application
Material
Standard Packing Material
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C
200 Series adaptors fit 200 & 290 series couplings.
Different sized couplings and adaptors are interchangeable.
Note
• 200 Series - 1500kPa
• 200S Series - 2000kPa
• 200 Series - Brass
• 200S Series - Steel (Zinc plated)
Pneumatic tools, air piping and air pressure equipment
Air
• Nitrile rubber
All prices excluding GST Page 115
AIR
LIN
E
Ryco Couplings & Adaptors
Super-Hi-Flow 290 Series - One Way Automatic Sealing In The Coupling
Media/Application
Material
Standard Packing Material
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C
• 3500kPa
200 Series adaptors fit 200 & 290 series couplings.
Different sized couplings and adaptors are interchangeable.
Note
• Steel (zinc plated)
Pneumatic tools, air piping and air pressure equipment
Air
• Nitrile rubber
All prices excluding GSTPage 116
AIR
LIN
E
Ryco Couplings & Adaptors
Industrial 300 Series - One-Way Automatic Sealing In The Coupling
• Steel (Zinc plated)
• Nitrile rubber
Media/Application
Material
Standard Packing Material
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C
• 3500kPa
Different sized couplings and adaptors are interchangeable.
Note
Pneumatic tools, air piping and air pressure equipment
Air
All prices excluding GST Page 117
AIR
LIN
E
Ryco Couplings & Adaptors
Pneumatic tools, air piping and air pressure equipment
Air
• Steel (Zinc plated)
• Nitrile rubber
Super-Hi-Flow 400 Series - One Way Automatic Sealing In The Coupling
Media/Application
Material
Standard Packing Material
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C
• 1500kPa
The manufacturer claims, Ryco 400 Series product, interchanges with Nitto Hi-Coupler Series product.
Different sized couplings and adaptors are interchangeable.
Note
All prices excluding GSTPage 118
AIR
LIN
E
Ryco Couplings & Adaptors
Super-Hi-Flow 500 Series - One-Way Automatic Sealing In The Coupling
Pneumatic tools, air piping and air pressure equipment
Air
• Steel (Zinc plated)
• Nitrile rubber
Media/Application
Material
Standard Packing Material
Operating Temperature
Max Working Pressure
• -20˚C to +80˚C
• 3500kPa
The manufacturer claims, Ryco 500 Series product interchanges with equivalent Cejn product.
Different sized couplings and adaptors are interchangeable.
Note
All prices excluding GST Page 119
AIR
LIN
E
200 Series Female Coupling - Sealing
Ryco Couplings & Adaptors
200 Series Hose Coupling - Sealing
200 Series Male Coupling - Sealing
200 Series Female Adaptor - Non Sealing
200 Series Hose Adaptor - Non Sealing
200 Series Male Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
068-200 200 1/4 Brass 21.06 14.04068-200S 200S 1/4 Steel 19.31 12.88068-243 243 3/8 Brass 24.61 16.41
Order Code Part No Hose RRP List Price
068-245 245 1/4 Brass 24.61 16.41068-240 240 5/16 Brass 24.61 16.41068-241 241 3/8 Brass 24.61 16.41
068-241S 241S 3/8 Steel 22.33 14.88
Order Code Part No BSP RRP List Price
068-201 201 1/4 Brass 22.79 15.19068-201S 201S 1/4 Steel 20.78 13.85068-244 244 3/8 Brass 24.61 16.41
Order Code Part No BSP RRP List Price
068-203 203 1/4 BSP Brass 4.87 3.24068-203S 203S 1/4 BSP Steel 3.68 2.45068-266S 266S 3/8 BSP Steel 6.95 4.64
Order Code Part No Hose RRP List Price
068-205 205 1/4 Brass 4.45 2.97068-205S 205S 1/4 Steel 3.75 2.50068-206 206 5/16 Brass 4.45 2.97
068-206S 206S 5/16 Steel 3.75 2.50068-206A 206A 3/8 Brass 4.45 2.97
068-206AS 206AS 3/8 Steel 3.75 2.50068-254S 254S 1/2 Steel 5.30 3.53
Order Code Part No BSP RRP List Price
068-204 204 1/8 Brass 4.45 2.97068-202 202 1/4 Brass 4.45 2.97
068-202S 202S 1/4 Steel 3.40 2.27068-251S 251S 3/8 Steel 5.14 3.43068-252S 252S 1/2 Steel 6.95 4.64
All prices excluding GSTPage 120
AIR
LIN
E
Ryco Couplings & Adaptors
290 Series Male Coupling - Sealing
300 Series Hose Coupling - Sealing
300 Series Female Coupling - Sealing
300 Series Male Coupling - Sealing
290 Series Female Coupling - Sealing
Order Code Part No BSP RRP List Price
068-290 290 1/4 28.71 19.14
290 Series Hose Coupling - Sealing
Order Code Part No Hose RRP List Price
068-298 298 3/8 30.95 20.63068-299 299 1/2 30.95 20.63
Order Code Part No BSP RRP List Price
068-291 291 1/4 BSP 28.71 19.14068-295 295 1/2 BSP 33.11 22.07
Order Code Part No BSP RRP List Price
068-322 322 3/8 49.56 33.04068-320 320 1/2 49.56 33.04
Order Code Part No Hose RRP List Price
068-341 341 1/2 49.56 33.04
Order Code Part No BSP RRP List Price
068-321 321 1/2 49.56 33.04
All prices excluding GST Page 121
AIR
LIN
E
300 Series Female Adaptor - Non Sealing
Ryco Couplings & Adaptors
300 Series Hose Adaptor - Non Sealing
300 Series Male Adaptor - Non Sealing
400 Series Female Coupling - Sealing
400 Series Hose Coupling - Sealing
400 Series Male Coupling - Sealing
Order Code Part No BSP RRP List Price
068-330 330 3/8 BSP 12.59 8.39068-303 303 1/2 BSP 14.45 9.63
Order Code Part No Hose RRP List Price
068-306 306 1/2 Hose 11.12 7.42
Order Code Part No BSP RRP List Price
068-332 332 1/4 12.59 8.39068-304 304 3/8 12.59 8.39068-302 302 1/2 12.59 8.39
Order Code Part No BSP RRP List Price
068-420SF 420SF 1/4 BSP 22.79 15.19
Order Code Part No Hose RRP List Price
068-430SH 430SH 3/8 23.92 15.94068-440SH 440SH 1/2 26.62 17.75
Order Code Part No BSP RRP List Price
068-420SM 420SM 1/4 BSP 22.17 14.78068-430SM 430SM 3/8 BSP 23.92 15.94068-440SM 440SM 1/2 BSP 26.62 17.75
All prices excluding GSTPage 122
AIR
LIN
E
Ryco Couplings & Adaptors
400 Series Female Adaptor - Non Sealing
400 Series Hose Adaptor - Non Sealing
400 Series Male Adaptor - Non Sealing
500 Series Hose Coupling - Sealing
500 Series Female Coupling - Sealing
500 Series Male Coupling - Sealing
Order Code Part No BSP RRP List Price
068-420PF 420PF 1/4 6.69 4.46
Order Code Part No Hose RRP List Price
068-430PH 430PH 3/8 8.08 5.39068-440PH 440PH 1/2 9.66 6.44
Order Code Part No BSP RRP List Price
068-420PM 420PM 1/4 6.69 4.46068-430PM 430PM 3/8 7.85 5.23068-440PM 440PM 1/2 9.66 6.44
Order Code Part No BSP RRP List Price
068-500 500 1/4 34.27 22.85068-543 543 3/8 34.27 22.85068-546 546 1/2 37.13 24.75
Order Code Part No Hose RRP List Price
068-541 541 3/8 34.27 22.85068-542 542 1/2 37.13 24.75
Order Code Part No BSP RRP List Price
068-501 501 1/4 34.27 22.85068-544 544 3/8 34.27 22.85068-547 547 1/2 37.13 24.75
All prices excluding GST Page 123
AIR
LIN
E
500 Series Female Adaptor - Non Sealing
Ryco Couplings & Adaptors
500 Series Hose Adaptor - Non Sealing
500 Series Male Adaptor - Non Sealing
Order Code Part No BSP RRP List Price
068-503 503 1/4 7.31 4.87
Order Code Part No Hose RRP List Price
068-506A 506A 3/8 9.66 6.44068-554 554 1/2 10.86 7.24
Order Code Part No BSP RRP List Price
068-502 502 1/4 7.31 4.87068-551 551 3/8 7.85 5.23068-552 552 1/2 7.85 5.23
All prices excluding GSTPage 124
AIR
LIN
E
CA93 Series Female Coupling - Sealing
CA93 Series Male Coupling - Sealing
BrakeFit Couplings & Adaptors
CA93 Series Bulkhead Coupling - Sealing
CA93 Series Male Coupling - Non Sealing
CA93 Series Female Coupling - Non Sealing
CA93 Series Bulkhead Coupling - Non Sealing
Order Code Part No NPS RRP List Price
34CA93-33 CA93-33 1/4 NPS 24.72 16.4834CA93-34 CA93-34 3/8 NPS 24.72 16.4834CA93-35 CA93-35 1/2 NPS 24.72 16.48
Order Code Part No NPT RRP List Price
34CA93-30 CA93-30 1/4 NPT 24.72 16.4834CA93-31 CA93-31 3/8 NPT 24.72 16.4834CA93-32 CA93-32 1/2 NPT 24.72 16.48
Order Code Tube x BSP RRP List Price
34CA93-001-6 3/8 Tube x 1/2 BSP 41.25 27.50
Order Code Part No NPS RRP List Price
34CA93-86 CA93-86 1/4 NPS 24.72 16.4834CA93-82 CA93-82 3/8 NPS 24.72 16.4834CA93-87 CA93-87 1/2 NPS 24.72 16.48
Order Code Part No NPT RRP List Price
34CA93-83 CA93-83 1/4 NPT 24.72 16.4834CA93-84 CA93-84 3/8 NPT 24.72 16.4834CA93-85 CA93-85 1/2 NPT 24.72 16.48
Order Code Tube x BSP RRP List Price
34CA93-006-6 3/8 Tube x 1/2 BSP 41.25 27.50
All prices excluding GST Page 125
AIR
LIN
E
CA93 Series Female Adaptor - Non Sealing
BrakeFit Couplings & Adaptors
CA93 Series Male Adaptor - Non Sealing
CA93 Series Bulkhead Adaptor - Non Sealing
CA93 Series Hose Adaptor - Non Sealing
CA93 Series Female Adaptor - Sealing
CA93 Series Male Adaptor - Sealing
Order Code Part No NPS RRP List Price
34CA93-21 CA93-21 1/4 NPS 5.87 3.9134CA93-22 CA93-22 3/8 NPS 5.87 3.9134CA93-23 CA93-23 1/2 NPS 6.18 4.12
Order Code Part No NPT RRP List Price
34CA93-18 CA93-18 1/4 NPT 4.17 2.7834CA93-19 CA93-19 3/8 NPT 4.17 2.7834CA93-20 CA93-20 1/2 NPT 4.17 2.78
Order Code Tube x BSP RRP List Price
34CA93-005-6 3/8 Tube x 1/2 BSP 17.02 11.35
Order Code Hose RRP List Price
34CA93-8 3/8 ID Hose 6.03 4.0234CA93-14 1/2 ID Hose 4.17 2.78
Order Code Part No NPS RRP List Price
34CA93-88 CA93-88 1/4 NPS 24.72 16.4834CA93-89 CA93-89 3/8 NPS 24.72 16.4834CA93-90 CA93-90 1/2 NPS 24.72 16.48
Order Code Part No NPS RRP List Price
34CA93-91 CA93-91 1/4 NPT 24.72 16.4834CA93-92 CA93-92 3/8 NPT 24.72 16.4834CA93-93 CA93-93 1/2 NPT 24.72 16.48
All prices excluding GSTPage 126
AIR
LIN
E
Coupling & Adaptor Brackets
BrakeFit Couplings & Adaptors
Order Code NPS RRP List Price
34SB420 1/2 NPS Female 27.04 18.0334SB423 1/4 NPS Female 27.42 18.28
All prices excluding GST Page 127
AIR
LIN
E
TubeFit - Pistol Grip Series
Air Guns
Order Code Description RRP List Price
061-10G Std Model 13.13 8.76061-10TCD Cab Duster Assembly 75.09 50.06
067-728 Zinc Cast - Carded 34.61 23.07
TubeFit - Squeeze Grip Series
Jamec-Pem Palm Grip Series
Jamec-Pem - Air Master Series
Order Code Part No Description RRP List Price
067-706 706 Squeeze Grip 32.54 21.69067-708 708 Safe-n-Quiet 89.12 59.41
Order Code Part No Description RRP List Price
067-411 411 Std Short Nose 42.77 28.51067-412 412 Std Long Nose 48.41 32.27
Order Code Part No Description RRP List Price
067-7181 7181 450mm Ext Nozzle 64.35 42.90067-0770 0770 Squeeze Grip - Ext Nozzle 74.93 49.95067-700 700 Palm Grip - Long Nozzle 50.52 33.68067-702 702 Palm Grip - Std Nozzle 42.42 28.28067-703 703 Palm Grip - Power Nozzle 94.50 63.00
067-702
067-700
067-703
067-7181 067-0770
All prices excluding GSTPage 128
AIR
LIN
E
Tyre Chucks
Order Code Description RRP List Price
068-9300 1/4 33.73 22.48068-9303 Dual Clip-On Chuck 168.95 112.63067-9301 Single Clip-On Chuck 17.77 11.85067-93031 Non Sealing Clip-On 6mm Hose 9.27 6.18068-706S Dual Hold on Chuck Sealing 16.61 11.07
068-706NS Dual Hold on Chuck Non Sealing 16.61 11.07067-9402 1/4 F Clip-On Sealing 17.77 11.85067-9404 1/4 F Clip-On Non Sealing 17.77 11.85
068-9303
068-706S
068-706NS
068-9300
067-93031
067-9301
067-9402
Tyre Inflation & Tyre Gauges
All prices excluding GST Page 129
AIR
LIN
E
Tyre Inflators
Tyre Valve Tools
Tyre Inflation & Tyre Gauges
Tyre Gauges
Manifold - Anodised Aluminium
Order Code Decription RRP List Price
068-91000TDR Dual Hold-On Chuck 0-1000 kPa Indicator 296.64 197.76
Order Code Part No Description RRP List Price
068-9326 326B Tyre Valve Tool 11.94 7.96068-9330 330 Tyre Valve Tool 17.74 11.82
Order Code Decription RRP List Price
068-9500 Single Hold-On Chuck 73-340 kPa Bar Indicator 49.83 33.22068-9510 Dual Hold-On Chuck 10-120 psi Bar Indicator 81.11 54.08068-9530 Single Hold-On Chuck 50-300 kPa Bar Indicator
Tractor Tyres83.43 55.62
068-9542 Dial Gauge 50MM Single Hold-On Angled Chuck 60psi / 400kPa
54.34 36.23
068-9550 Dual Hold-On Chuck 50-1100 kPa Dial Gauge, Truck Tyres
166.86 111.24
Order Code Decription RRP List Price
06Y-0406 3-Way Manifold 3-Way 1/4 BSP Outlets x 3/8 BSP Inlet 18.35 12.2406Y-05W 5-Way Manifold 5-Way 1/4 BSP Outlets x 3/8 BSP Inlet 22.03 14.69
All prices excluding GSTPage 130
AIR
LIN
E
Filter/Regulator/Lubricator Combination
Norgren Air Preparation Equipment
Regulator Units
Order Code Decription RRP List Price
07072-FRL04AD 1/4 Filter / Reg / Lub, Auto Drain, C/W Gauge, Bracket & Shut-off Valve
534.42 356.28
07072-FRL04MD 1/4 Filter / Reg / Lub, Manual Drain, C/W Gauge, Bracket & Shut-off Valve
463.04 308.69
07073-FRL06AD 3/8 Filter / Reg / Lub, Auto Drain, C/W Gauge, Bracket & Shut-off Valve
700.72 467.15
07073-FRL06MD 3/8 Filter / Reg / Lub, Manual Drain, C/W Gauge, Bracket & Shut-off Valve
509.85 339.90
07074-FRL08AD 1/2 Filter / Reg / Lub, Auto Drain, C/W Gauge, Bracket & Shut-off Valve
711.47 474.32
07074-FRL08MD 1/2 Filter / Reg / Lub, Manual Drain, C/W Gauge, Bracket & Shut-off Valve
618.77 412.52
Order Code Decription RRP List Price
07073-R04 R72 Series 1/4 BSPP Regulator, 0-10 Bar 162.23 108.1507073-R06 R73 Series 3/8 BSPP Regulator, 0-10 Bar 170.57 113.7107073-R08 R74 Series 1/2 BSPP Regulator, 0-10 Bar 170.57 113.71
Filter Units
Order Code Decription RRP List Price
07073-F04AD F72 Series 1/4 BSPP Filter - Auto Drain 1500Lpm 218.31 145.5407073-F04MD F72 Series 1/4 BSPP Filter - Manual Drain 1500Lpm 166.86 111.2407073-F06AD F73 Series 3/8 BSPP Filter - Auto Drain 1860Lpm 215.53 143.6907073-F06MD F73 Series 3/8 BSPP Filter - Manual Drain 1860Lpm 164.08 109.3907073-F08AD F74 Series 1/2 BSPP Filter - Auto Drain 1980 Lpm 217.85 145.2307073-F08MD F74 Series 1/2 BSPP Filter - Manual Drain 1980 Lpm 166.40 109.39
Filter Regulator Units
Order Code Decription RRP List Price
07073-FR04AD 72 Series 1/4 BSPP Filter / Regulator, Auto Drain 2280 Lpm 314.95 209.97
07073-FR04MD 72 Series 1/4 BSPP Filter / Regulator, Manual Drain 2280 Lpm 222.48 148.32
07073-FR06AD 73 Series 3/8 BSPP Filter / Regulator, Auto Drain 3480 Lpm 326.30 217.54
07073-FR06MD 73 Series 3/8 BSPP Filter / Regulator, Manual Drain 3480 Lpm 264.47 176.32
07073-FR08AD 74 Series 1/2 BSPP Filter / Regulator, Auto Drain 3480 Lpm 332.10 221.40
07073-FR08MD 74 Series 1/2 BSPP Filter / Regulator, Manual Drain 3480 Lpm 290.34 193.56
Complete with gauge & bracket
All complete with bracket
All complete with gauge & bracket
All prices excluding GST Page 131
AIR
LIN
E
Lubricator Units
Norgren Air Preparation Equipment
Order Code Decription RRP List Price
07073-L04M L72 1/4 BSPP Lubricator, Microfog 1680 Lpm 270.82 180.5507073-L06M L73 3/8 BSPP Lubricator, Microfog 1680 Lpm 264.43 176.2807073-L08M L73 1/2 BSPP Lubricator, Microfog 1680 Lpm 270.13 180.09
Airline Accessories
Order Code Decription RRP List Price
07001-M5 M5 Brass Flat Silencer 4.73 3.1507001-02 1/8 Brass Flat Silencer 5.70 3.8007001-04 1/4 Brass Flat Silencer 8.06 5.3807001-06 3/8 Brass Flat Silencer 13.40 8.9307001-08 1/2 Brass Flat Silencer 19.10 12.7307001-12 3/4 Brass Flat Silencer 32.45 21.6307001-16 1 Brass Flat Silencer 58.73 39.1507002-02 1/8 BSP Dome Sintered Bronze Silencer 11.03 7.3507002-04 1/4 BSP Dome Sintered Bronze Silencer 12.44 8.2907002-06 3/8 BSP Dome Sintered Bronze Silencer 32.07 21.3807002-08 1/2 BSP Dome Sintered Bronze Silencer 48.95 32.6307002-12 3/4 BSP Dome Sintered Bronze Silencer 90.94 60.6307002-16 1 BSP Dome Sintered Bronze Silencer 143.87 95.91
07072-AWB 72 Series Wall Mount Bracket 57.47 38.3207073-AWB 73 Series Wall Mount Bracket 24.10 16.0707074-AWB 74 Series Wall Mount Bracket 68.60 45.7307072-AQC 72 Series Quick Clamp 26.65 17.7707073-AQC 73/74 Series Quick Clamp 30.13 20.0907073-A04V 72 Series 1/4 BSPP Shutoff Valve 136.73 91.1607073-A06V 73 Series 3/8 BSPP Shutoff Valve 135.02 90.0107073-A08V 74 Series 1/2 BSPP Shutoff Valve 136.73 91.16
07073-592502 72 Series Replacement Element 40 Micron 16.22 10.8207073-443803 73 Series Replacement Element 40 Micron 16.92 11.2807073-433805 74 Series Replacement Element 40 Micron 17.61 11.74
07064-G4010RE Gauge 40mm 0-10 Bar 72 Series 57.47 38.3207073-G4010RE Gauge 40mm 0-10 Bar 73-74 Series 63.27 42.1807072-425551 Tamper Proof Kit 72 Series 20.21 13.4707073-445551 Tamper Proof Kt 73 Series 39.30 26.2007074-435551 Tamper Proof Kit 74 Series 62.11 41.41
Complete with bracket
All prices excluding GSTPage 132
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
Fuel Filter Adaptors
Heater Hose Joiner Fittings
Specific Application Fittings
Heater Hose Fittings
Oxy-Acetylene Fittings
Oxy-Acetylene Fittings
Order Code Description RRP List Price
06C-604 1/4 Hose x 1/2 20 TPI Straight 8.03 5.36 06C-605 5/16 Hose x 1/2 20 TPI Straight 4.54 3.03 06C-606 3/8 Hose x 1/2 20 TPI Straight 5.01 3.34 06C-704 1/4 BSP x 1/2 20 TPI Straight 6.44 4.30 06C-804 1/4 BSP x 1/2 20 TPI Elbow 13.91 9.27
Order Code Part No. Description RRP List Price
06003-1006 P3 5/8 Hose x 3/8 BSPT 5.73 3.82
Order Code Part No. Description RRP List Price
06007-10 P7 5/8 Hose Joiner 6.15 4.10
Order Code Part No. Description RRP List Price
18112 LP112 Right Hand - OXY 5mm Hose x 5/8 NF 11.03 7.35
Order Code Part No. Description RRP List Price
18265 LP 265 5mm Hose Joiner 13.47 8.98
Oxy-Acetylene Fittings
Order Code Part No. Description RRP List Price
18034 WB34 Right Hand - OXY 5/8 NF 10.89 7.2618035 WB35 Left Hand - ACET 5/8 NFLH 10.51 7.0018027 AR27 Right Hand - OXY 5/8 NF x 1/4 BSP 10.51 7.00
18090 AR90 Left Hand - ACET 5/8 NFLH x 1/4 BSP 10.89 7.26
All prices excluding GST Page 133
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
Thread Sealant & Tape
Thread Tape
Thread Sealant
Order Code Description RRP List Price
24005-AU 12mm / 6m Plumbers Tape 7.71 5.1424007 12mm / 15m Anti-Seize Tape 42.41 28.2724010 12mm / 6m Gas Tape 13.75 9.1724011 12mm / 10m Standard Tape 1.45 0.9724012 12mm / 6.5m Stainless Steel Tape 29.15 19.4424013 25mm / 10m Standard Tape 8.50 5.67
Order Code Description RRP List Price
24023 225ml Jar Laco Slic-Tite Paste 95.25 63.50
Pistol Grip Grease Gun
Oil Suction Guns
Order Code Description RRP List Price
37480 500cc Grease Gun 86.91 57.94
Order Code Description RRP List Price
37501 500cc Oil Suction Gun 37.00 24.6737503 1000cc Oil Suction Gun 56.16 37.44
Engine Cleaning Gun
Order Code Description RRP List Price
37600 Cleaning Gun Aluminium Pot 61.03 40.69
All prices excluding GSTPage 134
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
Plated Steel Grease Nipples BSF
Plated Steel Grease Nipples BSW
Hydraulic Grease Nipples
Plated Steel Grease Nipples BSP
Plated Steel Grease Nipples NPT
Plated Steel Grease Nipples UNF
Order Code Part No. Description RRP List Price
Y12001 No 1 1/4 Straight 1.02 0.68Y12005 No 5 1/4 45° 1.96 1.31Y12008 No 8 1/4 67.5° 1.96 1.31Y12010 No 10 1/4 90° 1.96 1.31Y12012 No 12 5/16 Straight 1.47 0.98Y12020 No 20 5/16 67.5° 2.60 1.73
Order Code Part No. Description RRP List Price
Y12029 No 29 1/8 Straight 1.11 0.74Y12034 No 34 1/8 45° 2.12 1.41Y12039 No 39 1/8 67.5° 2.12 1.41Y12044 No 44 1/8 90° 2.12 1.41Y12046 No 46 1/8 1Pc Std Button Hd 2.98 1.99Y12048 No 48 1/4 Straight 2.29 1.52Y12052 No 52 1/4 45° 4.39 2.93Y12056 No 56 1/4 67.5° 4.39 2.93Y12060 No 60 1/4 90° 4.39 2.93
Order Code Part No. Description RRP List Price
Y12002 No 2 1/4 Straight 1.25 0.83Y12006 No 6 1/4 45° 4.56 3.04Y12009 No 9 1/4 67.5° 4.56 3.04Y12011 No 11 1/4 90° 4.56 3.04
Order Code Part No. Description RRP List Price
Y12028 No 28 1/8 Straight 1.16 0.77Y12138 No 138 1/8 45° 2.12 1.41Y12037 No 37 1/8 67.5° 2.12 1.41Y12043 No 43 1/8 90° 2.12 1.41Y12047 No 47 1/4 Straight 2.98 1.99Y12051 No 51 1/4 45° 6.12 4.08Y12059 No 59 1/4 90° 6.12 4.08
Order Code Part No. Description RRP List Price
Y12003 No 3 1/4 Straight 1.02 0.68Y12007 No 7 1/4 45° 1.96 1.31Y12188 No 188 1/4 67.5° 1.96 1.31Y12107 No 107 1/4 90° 1.96 1.31Y12127 No 127 1/4 Straight - 15/16 long 2.22 1.48Y12190 No 190 5/16 Straight 1.25 0.83Y12195 No 195 3/8 Straight 1.36 0.91
All prices excluding GST Page 135
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
Plated Steel Grease Nipples Metric
Plated Steel Grease Nipples Drive Fit
Stainless Steel Grease Nipples BSF
Hydraulic Grease Nipples
Stainless Steel Grease Nipples BSP
Order Code Part No. Description RRP List Price
Y12161 No 161 6mm x 1mm Straight 1.02 0.68Y12168 No 168 6mm x 1mm 45° 1.96 1.31Y12165 No 165 6mm x 1mm 90° 1.96 1.31Y12163 No 163 6mm x 1mm Self Tapping 1.36 0.91Y12162 No 162 8mm x 1mm Straight 1.05 0.70Y12172 No 172 8mm x 1mm 45° 2.02 1.35Y12169 No 169 8mm x 1mm 90° 2.02 1.35Y12015 No 15 8mm x 1.25mm Straight 1.11 0.74Y12173 No 173 8mm x 1.25mm 90° 2.13 1.42Y12200 No 200 10mm x 1mm Straight 1.17 0.78Y12203 No 203 10mm x 1mm 45° 2.22 1.48Y12204 No 204 10mm x 1mm 90° 2.13 1.42Y121010 No 1010 10mm x 1mm Std Button Hd 10.94 7.29Y12205 No 205 10mm x 1.5mm Straight 2.02 1.35Y12206 No 206 10mm x 1.5mm 45° 2.72 1.81
Order Code Part No. Description RRP List Price
Y12001SS No 1SS 1/4 Straight 23.30 15.53
Order Code Part No. Description RRP List Price
Y12078 No 78 1/4 Drive Fit - with check 1.19 0.79Y12077 No 77 1/4 Drive Fit - no check 1.16 0.77
Order Code Part No. Description RRP List Price
Y12029SS No 29SS 1/8 Straight 23.30 15.53Y12034SS No 34SS 1/8 45° 43.99 29.32Y12044SS No 44SS 1/8 90° 43.99 29.32Y12048SS No 48SS 1/4 Straight 29.17 19.45Y12052SS No 52SS 1/4 45° 79.46 52.97Y12060SS No 60SS 1/4 90° 79.46 52.97
All prices excluding GSTPage 136
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
Stainless Steel Grease Nipples NPT
Stainless Steel Grease Nipples Metric
Hydraulic Grease Nipples
Stainless Steel Grease Nipples UNF
Order Code Part No. Description RRP List Price
Y12028SS No 28SS 1/8 Straight 23.30 15.53Y12043SS No 43SS 1/8 90° 43.99 29.32
Order Code Part No. Description RRP List Price
Y12003SS No 3SS 1/4 Straight 23.30 15.53Y12007SS No 7SS 1/4 45° 43.99 29.32Y12107SS No 107SS 1/4 90° 43.99 29.32
Order Code Part No. Description RRP List Price
Y12161SS No 161SS 6mm x 1mm Straight 23.30 15.53Y12168SS No 168SS 6mm x 1mm 45° 43.99 29.32Y12165SS No 165SS 6mm x 1mm 90° 43.99 29.32Y12162SS No 162SS 8mm x 1mm Straight 23.30 15.53Y12172SS No 172SS 8mm x 1mm 45° 43.99 29.32Y12169SS No 169SS 8mm x 1mm 90° 43.99 29.32Y12200SS No 200SS 10mm x 1mm Straight 23.30 15.53Y12203SS No 203SS 10mm x 1mm 45° 43.99 29.32Y12204SS No 204SS 10mm x 1mm 90° 43.99 29.32
All prices excluding GST Page 137
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
40mm Dry Gauge - Bottom Entry
40mm Dry Gauge - Rear Entry
50mm Dry Gauge - Bottom Entry
Pressure Gauges
Order Code Description RRP List Price
0804D-2250SB 250kPa - 1/8 BSPT Stainless Steel Case 27.24 18.160804D-2400SB 400kPa - 1/8 BSPT Stainless Steel Case 27.24 18.16
0804D-21000SB 1000kPa - 1/8 BSPT Stainless Steel Case 27.24 18.16
Order Code Description RRP List Price
0804D-2250NSR 250kPa - 1/8 NPT Stainless Steel Case 27.87 18.580804D-2100SRV -100kPa Vacuum - 1/8 BSPT Stainless Steel Case 33.08 22.050804D-2250SR 250kPa - 1/8 BSPT Stainless Steel Case 27.87 18.580804D-2400SR 400kPa - 1/8 BSPT Stainless Steel Case 27.87 18.58
0804D-21000SR 1000kPa - 1/8 BSPT Stainless Steel Case 27.87 18.580804D-41000SR 1000kPa - 1/4 BSPT Stainless Steel Case 27.87 18.58
Order Code Description RRP List Price
0805D-2800BB 800kPa - 1/8 BSPT Black Steel Case 24.98 16.660805D-4100SBV -100kPa Vacuum - 1/4 BSPT Stainless Steel Case 36.54 24.360805D-4100SB 100kPa - 1/4 BSPT Stainless Steel Case 36.54 24.360805D-4160SB 160kPa - 1/4 BSPT Stainless Steel Case 36.54 24.36
0805D-4250ABP 250kPa Swimming Pool - 1/4 BSPT ABS Plastic Case 22.39 14.92
0805D-4250SBP 250kPa Swimming Pool - 1/4 BSPT Stainless Steel Case 29.56 19.70
0805D-4250SB 250kPa - 1/4 BSPT Stainless Steel Case 29.56 19.700805D-4400CB 400kPa - 1/4 BSPT Safety Case 24.98 16.660805D-4400SB 400kPa - 1/4 BSPT Stainless Steel Case 29.56 19.700805D-4800BB 800kPa - 1/4 BSPT Black Steel Case 24.98 16.660805D-4800SB 800kPa - 1/4 BSPT Stainless Steel Case 29.56 19.70
0805D-41000BB 1000kPa - 1/4 BSPT Black Steel Case 24.98 16.660805D-41000CB 1000kPa - 1/4 BSPT Safety Case 24.98 16.660805D-41000SB 1000kPa - 1/4 BSPT Stainless Steel Case 29.56 19.700805D-41600BB 1600kPa - 1/4 BSPT Black Steel Case 24.98 16.660805D-41600SB 1600kPa - 1/4 BSPT Stainless Steel Case 29.56 19.70
0805D-42500NSB 2500kPa - 1/4 NPT Stainless Steel Case 33.45 22.300805D-44000SB 4000kPa - 1/4 BSPT Stainless Steel Case 33.45 22.300805D-48000CB 8000kPa - 1/4 BSPT Safety Case 34.27 22.850805D-416000CB 16000kPa - 1/4 BSPT Safety Case 34.27 22.850805D-425000CB 25000kPa - 1/4 BSPT Safety Case 34.27 22.85
All prices excluding GSTPage 138
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
50mm Liquid Filled Gauge - Bottom Entry
63mm Dry Gauge - Bottom Entry
Pressure Gauges
50mm Dry Gauge - Rear Entry
Order Code Description RRP List Price
0805L-4250SBP 250kPa Swimming Pool - 1/4 BSPT Stainless Steel Case 44.73 29.820805L-41600SB 1600kPa - 1/4 BSPT Stainless Steel Case 44.73 29.82
Order Code Description RRP List Price
0805D-2100SRV -100kPa Vacuum - 1/8 BSPT Stainless Steel Case 31.81 21.210805D-2400SR 400kPa - 1/8 BSPT Stainless Steel Case 31.81 21.210805D-2800SR 800kPa - 1/8 BSPT Stainless Steel Case 31.81 21.21
0805D-21000BR 1000kPa - 1/8 BSPT Black Steel Case 27.38 18.250805D-21000SR 1000kPa - 1/8 BSPT Stainless Steel Case 31.81 21.210805D-21600SR 1600kPa - 1/8 BSPT Stainless Steel Case 31.81 21.210805D-24000SR 4000kPa - 1/8 BSPT Stainless Steel Case 31.81 21.210805D-4250ARP 250kPa Swimming Pool- 1/4 BSPT ABS Plastic Case 23.48 15.660805D-4250SRP 250kPa Swimming Pool - 1/4 BSPT Stainless Steel Case 31.81 21.210805D-4250SR 250kPa - 1/4 BSPT Stainless Steel Case 31.81 21.210805D-4800SR 800kPa - 1/4 BSPT Stainless Steel Case 31.81 21.210805D-41000SR 1000kPa - 1/4 BSPT Stainless Steel Case 31.81 21.210805D-41600BR 1600kPa - 1/4 BSPT Black Steel Case 31.81 21.210805D-41600SR 1600kPa - 1/4 BSPT Stainless Steel Case 30.88 20.59
Order Code Description RRP List Price
0806D-4100BBV -100kPa Vacuum - 1/4 BSPT Black Steel Case 39.91 26.600806D-4100BB 100kPa - 1/4 BSPT Black Steel Case 39.91 26.600806D-4250BB 250kPa - 1/4 BSPT Black Steel Case 34.84 23.230806D-4400BB 400kPa - 1/4 BSPT Black Steel Case 34.84 23.230806D-4600BB 600kPa - 1/4 BSPT Black Steel Case 34.84 23.230806D-4800BB 800kPa - 1/4 BSPT Black Steel Case 34.84 23.230806D-41000BB 1000kPa - 1/4 BSPT Black Steel Case 34.84 23.230806D-41600BB 1600kPa - 1/4 BSPT Black Steel Case 34.84 23.230806D-42500BB 2500kPa - 1/4 BSPT Black Steel Case 36.09 24.060806D-44000BB 4000kPa - 1/4 BSPT Black Steel Case 36.09 24.060806D-46000BB 6000kPa - 1/4 BSPT Black Steel Case 38.36 25.57
All prices excluding GST Page 139
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
63mm Liquid Filled Gauge - Bottom Entry
63mm Dry Gauge - Rear Entry
Pressure Gauges
Order Code Description RRP List Price
0806L-4100SBV -100kPa Vacuum - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-4100SB 100kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-4250SB 250kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-4400SB 400kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-4600SB 600kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-4800SB 800kPa - 1/4 BSPT Stainless Steel Case 49.67 33.11
0806L-41000SB 1000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-41600SB 1600kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-42500SB 2500kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-44000SB 4000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-46000SB 6000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-48000SB 8000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.11
0806L-410000SB 10000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-416000SB 16000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-425000SB 25000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-440000SB 40000kPa - 1/4 BSPT Stainless Steel Case 49.67 33.11
Order Code Description RRP List Price
0806D-4250BR 250kPa - 1/4 BSPT Black Steel Case 36.09 24.060806D-41000BR 1000kPa - 1/4 BSPT Black Steel Case 36.09 24.060806D-41600BR 1600kPa - 1/4 BSPT Black Steel Case 36.09 24.060806D-44000BR 4000kPa - 1/4 BSPT Black Steel Case 36.09 24.060806D-46000BR 6000kPa - 1/4 BSPT Black Steel Case 36.09 24.06
0806D-4100SRFV 100kPa Vacuum - 1/4 BSPT Stainless Steel Case Flanged 57.57 38.380806D-4100SRF 100kPa - 1/4 BSPT Stainless Steel Case Flanged 57.57 38.38
All prices excluding GSTPage 140
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
63mm Liquid Filled Gauge - Rear Entry
80mm Dry Gauge - Rear Entry
Pressure Gauges
80mm Dy Gauge - Bottom Entry
Order Code Description RRP List Price
0806L-4100SRV -100kPa Vacuum - 1/4 BSPT Stainless Steel Case 49.67 33.110806L-4100SR 100kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-4250SR 250kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-4600SR 600kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-4800SR 800kPa - 1/4 BSPT Stainless Steel Case 52.44 34.96
0806L-41000SR 1000kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-41600SR 1600kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-42500SR 2500kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-44000SR 4000kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-46000SR 6000kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-48000SR 8000kPa - 1/4 BSPT Stainless Steel Case 52.44 34.96
0806L-416000SR 16000kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-425000SR 25000kPa - 1/4 BSPT Stainless Steel Case 52.44 34.960806L-440000SR 40000kPa - 1/4 BSPT Stainless Steel Case 52.44 34.96
Order Code Description RRP List Price
0808D-4100BBV -100kPa Vacuum - 1/4 BSPT Black Steel Case 58.01 38.680808D-4250BB 250kPa - 1/4 BSPT Black Steel Case 52.51 35.010808D-4400BB 400kPa - 1/4 BSPT Black Steel Case 52.51 35.010808D-4800BB 800kPa - 1/4 BSPT Black Steel Case 52.51 35.01
0808D-41000BB 1000kPa - 1/4 BSPT Black Steel Case 52.51 35.010808D-41600BB 1600kPa - 1/4 BSPT Black Steel Case 52.51 35.010808D-42500BB 2500kPa - 1/4 BSPT Black Steel Case 52.51 35.010808D-44000BB 4000kPa - 1/4 BSPT Black Steel Case 52.51 35.01
Order Code Description RRP List Price
0808D-41600BR 1600kPa - 1/4 BSPT Black Steel Case 57.86 38.570808D-42500BR 2500kPa - 1/4 BSPT Black Steel Case 57.86 38.57
All prices excluding GST Page 141
SP
EC
IFIC
AP
PL
ICA
TIO
N
PR
OD
UC
TS
100mm Dry Gauge - Bottom Entry - Single Scale - kPa Only
Pressure Gauges
Order Code Description RRP List Price
0810D-6100BBV -100kPa Vacuum - 3/8 BSPT Black Steel Case 65.03 43.350810D-6250BB 250kPa - 3/8 BSPT Black Steel Case 60.16 40.110810D-6400BB 400kPa - 3/8 BSPT Black Steel Case 60.16 40.110810D-6800BB 800kPa - 3/8 BSPT Black Steel Case 60.16 40.11
0810D-61000BB 1000kPa - 3/8 BSPT Black Steel Case 60.16 40.110810D-61600BB 1600kPa - 3/8 BSPT Black Steel Case 60.16 40.110810D-62500BB 2500kPa - 3/8 BSPT Black Steel Case 60.16 40.110810D-64000BB 4000kPa - 3/8 BSPT Black Steel Case 60.16 40.110810D-82500BB 2500kPa - 1/2 BSPT Black Steel Case 60.16 40.11
100mm Liquid Filled Gauge - Bottom Entry
Accessories
Order Code Description RRP List Price
0810L-6100SBV -100kPa Vacuum - 3/8 BSPT Stainless Steel Case 122.69 81.790810L-6250SB 250kPa - 3/8 BSPT Stainless Steel Case 122.69 81.790810L-6400SB 400kPa - 3/8 BSPT Stainless Steel Case 122.69 81.790810L-6800SB 800kPa - 3/8 BSPT Stainless Steel Case 122.69 81.79
0810L-61000SB 1000kPa - 3/8 BSPT Stainless Steel Case 122.69 81.790810L-61600SB 1600kPa - 3/8 BSPT Stainless Steel Case 122.69 81.790810L-62500SB 2500kPa - 3/8 BSPT Stainless Steel Case 122.69 81.79
Order Code Description RRP List Price
0805-FF Front Flange 50mm 12.13 8.090806-FF Front Flange 63mm 14.09 9.390806-RB Rubber Boot for 63mm Gauge 35.76 23.84
0804-PMK Panel Mount Kit 40mm 7.42 4.940805-PMK Panel Mount Kit 50mm 8.85 5.900806-PMK Panel Mount Kit 63mm 10.55 7.03
Single Scale kPa only
All prices excluding GSTPage 142
VA
LVE
S &
TAP
S
Brass Ball Valves
• -15˚C to +150˚C in absence of steam
Ideal Series - Full Bore, Brass Ball Valve
Media/Application
Operating Temperature
Construction:
Lever Handle• Red varnished steel with zinc plated bolt
Body
Standard Packing Material
Ball
Stem
Pipe Thread Standard• AS IS0 7.1/2 (previously AS 1722.1) (RP series)
Industrial, pneumatic, domestic and hydraulic installations
Air
Water (non-drinking)
Petrol
Oil
• Nickel plated brass
• Teflon (P.T.F.E.)
• Chrome plated brass
• Brass
All prices excluding GST Page 143
VA
LVE
S &
TA
PS
Brass Ball Valves
• -15˚C to +90˚C
Mini Series - Reduced Bore Brass Ball Valve
Media/Application
Operating Temperature
Construction:
Body
Standard Packing Material• Teflon (P.T.F.E.)
Ball• Chrome plated brass
Butterfly Handle• Red Nylon 6.6 with zinc plated bolt
Stem• Brass
Pipe Thread Standard• AS1722.2 (G series)
Industrial, pneumatic, domestic and hydraulic installations
Air
Water (non-drinking)
Petrol
Oil
• Nickel plated brass
All prices excluding GSTPage 144
VA
LVE
S &
TAP
S
Brass Ball Valves
Industrial, pneumatic, domestic and hydraulic installations
Gas
Air
Water (non-drinking)
Steam
Petrol
Oil
• -15˚C to +150˚C
Berlin Series Gas Approved, Full Bore, Brass Ball Valve
Media/Application
Operating Temperature
Construction:
• Nickel plated brass
Body
Standard Packing Material• Teflon (P.T.F.E.)
Ball• Chrome plated brass
Butterfly Handle• Yellow aluminium with zinc plated bolt
Stem• Brass
Pipe Thread Standard• Female AS IS0 7.1/2 (previously AS 1722.1) (RP series)
Lever Handle• Yellow varnished steel with zinc plated bolt
A.G.A Approval• 5256 to 1050 kPa all sizes
All prices excluding GST Page 145
VA
LVE
S &
TA
PS
Brass Ball Valves
Industrial, pneumatic, domestic and hydraulic installations
Air
Water (non-drinking)
Petrol
Oil
• -15˚C to +150˚C in absence of steam
Three-Way Reduced Bore, Brass Ball Valve, L Port
Media/Application
Operating Temperature
Construction:
• Nickel plated brass
Body
Standard Packing Material• Teflon (P.T.F.E.)
Ball• Chrome plated brass
Lever Handle• Red aluminium with zinc placed bolt
Stem• Brass
Pipe Thread Standard• AS1722.2 (G series)
All prices excluding GSTPage 146
VA
LVE
S &
TAP
S
Brass Ball Valves
Industrial, pneumatic, domestic and hydraulic installations
Air
Water (non-drinking)
Petrol
Oil
• -15˚C to +110˚C
Gar Ball Bibcock with Hose-End
Media/Application
Operating Temperature
Construction:
• Nickel plated brass
Body
Standard Packing Material• Teflon (P.T.F.E.)
Ball• Chrome plated brass
Stem• Brass
Pipe Thread Standard• AS1722.2 (G series)
Lever Handle• Red varnished steel with zinc plated bolt
Hose Fitting • Nylon 6.6 nut & vestolen A 6016 barb or nickel plated brass
All prices excluding GST Page 147
VA
LVE
S &
TA
PS
Brass Gate Valves
Industrial, pneumatic, domestic and hydraulic installations
Water (non-drinking)
• 0˚C to +60˚C
Brass Gate Valve - Untested
Media/Application
Operating Temperature
Construction:
• Brass
Body
Standard Packing Material• Dutral EPDM Rubber
Hand Wheel• Red varnished steel with zinc plated nut
Stem• Brass
Seat• Brass
All prices excluding GSTPage 148
VA
LVE
S &
TAP
S
Brass Swing Check Valves
Industrial, domestic and hydraulic installations
Water (non-drinking)
• 0˚C to +60˚C
Swing Check Valve - Untested
Media/Application
Operating Temperature
Construction:
• Brass
Body
Standard Packing Material• Nitrilic rubber NBR 65
Pipe Thread Standard• AS1722.2 (G series)
All prices excluding GST Page 149
VA
LVE
S &
TA
PS
Brass Check Valves
Industrial, domestic and hydraulic installations
Air
Water (non-drinking)
• 0˚C to +80˚C
York Check & Foot Valve*
Media/Application
Operating Temperature
Construction:
• Brass
Body
Standard Packing Material• Nitrilic rubber NBR 65
Stem • Nylon 6.6
Spring• 304 Stainless Steel
Filter Mesh• 304L Stainless Steel
Filter Thread• Nylon 6.6
Pipe Thread Standard
Note
• AS1722.2 (G Series)
To convert a check valve to a foot valve, simply mate equivalent sized valve and filter.
All prices excluding GSTPage 150
VA
LVE
S &
TAP
S
Brass Ball Valves
Industrial, pneumatic, domestic and hydraulic installations
Gas
Air
Water (non-drinking)
Steam
Petrol
Oil
• -20˚C to +150˚C
Total Series - Gas Approved, Full Bore, Brass Ball Valve
Media/Application
Operating Temperature
Construction:
• Nickel plated brass
Body
Standard Packing Material• Teflon (P.T.F.E.)
Ball• Chrome plated brass
• Black die cast aluminium (polyurethane coated) with zinc plated bolt
Lever Handle
Stem• Brass
Pipe Thread Standard• Female AS IS0 7.1/2 (previously AS 1722.1)
A.G.A. Approval• 5301
All prices excluding GST Page 151
VA
LVE
S &
TA
PS
Brass Ball Valves
Industrial, pneumatic, domestic and hydraulic installations
Water
Air
Petrol
Oil
• -20˚C to +80˚C
• 21000kPa
Hipress Series - High Pressure, Reduced Bore, Brass Ball Valve
Media/Application
Operating Temperature
Maximum Pressure
Construction:
• Nickel plated brass
Body
Standard Packing Material• Acetic resin / viton "O"-Ring
Ball • Chrome plated brass
Butterfly Handle• Black die cast aluminium (polyurethane coated) with zinc plated nut
Stem• Brass
Pipe Thread Standard• AS IS0 7.1/2 (previously AS 1722.1)
All prices excluding GSTPage 152
VA
LVE
S &
TAP
S
Brass Ball Valves
Industrial, pneumatic, domestic and hydraulic installations
Gas
Air
Water (non-drinking)
Petrol
Oil
• -10˚C to +120˚C
Triflux Three-Way T Port Brass Ball Valve, Full Bore, Gas Approved
Media/Application
Operating Temperature
Construction:
• Nickel plated brass
Body
Standard Packing Material• Teflon (P.T.F.E.)
Ball• Chrome plated brass
• Powder Coasted Aluminium
Lever Handle
Stem• Brass
Pipe Thread Standard• AS IS0 7.1/2 (previously AS 1722.1)
A.G.A. Approval• 5301
All prices excluding GST Page 153
VA
LVE
S &
TA
PS
Stainless Steel Ball Valves - 316 Grade
Industrial, pneumatic, domestic and hydraulic installations
Air
Water (non-drinking)
Steam
Petrol
Oil
• 0˚C to +220˚C
Stainless Steel Ball Valves
Media/Application
Operating Temperature
• 316 Stainless steel
Body
Standard Packing Material• Teflon (P.T.F.E.)
Ball • 316 Stainless steel
Lever Handle• PVC Coated 304 stainless steel
Stem• 316 Stainless steel
Bolts, Nuts and Spring Washers• 316 Stainless steel
Pipe Thread Standard• Female AS1722.2 (G Series)
NoteNPT Threaded option available on some 2 and 3 piece valves.
Construction:
All prices excluding GSTPage 154
VA
LVE
S &
TAP
S
Brass Needle Valves
Industrial, pneumatic, domestic and hydraulic installations
Gas*
Air
Water (non-drinking)
Petrol
Oil
• 0˚C to +90˚C
Needle Valves
Media/Application
Operating Temperature
• DR Brass
Body
Standard Packing Material• Viton
• DR Brass
Handle
Stem• DR Brass
Pipe Thread Standard• Female AS IS0 7.1/2 (previously AS 1722.1)
• Male AS IS0 7.1/2 (previously AS 1722.1)
A.G.A Approval• 4104
• *Compression type or barb type needle valves are not recommended, or approved, for use with gas.
Construction:
All prices excluding GST Page 155
VA
LVE
S &
TA
PS
Brass Lever Taps
Industrial, pneumatic, domestic and hydraulic installations
Air
Water (non-drinking)
Petrol
Oil
• 0˚C to +60˚C
Lever Taps
Media/Application
Operating Temperature
• Brass
Body
• Brass
Lever Handle
Stem• DR Brass
Pipe Thread Standard
Note
• Female AS IS0 7.1/2 (previously AS 1722.1)
• Male AS IS0 7.1/2 (previously AS 1722.1) (R Series)
Not recommended or approved for use with gas.
Standard Lubricant• Graphite Grease
Construction:
All prices excluding GSTPage 156
VA
LVE
S &
TAP
S
Ideal Series - F & F Full Bore Brass Ball Valve
Mini Series - M & F Reduced Bore Ball Valve
Brass Ball Valves
Mini Series - F & F Reduced Bore Ball Valve
Order Code Size Maximum Pressure RRP List Price
47026-04 1/4 BSP 4900kPa 9.69 6.4647026-06 3/8 BSP 4900kPa 9.86 6.5747026-08 1/2 BSP 4900kPa 11.87 7.9147026-12 3/4 BSP 3900kPa 17.47 11.6547026-16 1 BSP 3900kPa 26.79 17.8647026-20 1 1/4 BSP 2950kPa 43.01 28.6847026-24 1 1/2 BSP 2950kPa 63.14 42.1047026-32 2 BSP 2480kPa 99.87 66.5847026-40 2 1/2 BSP 1790kPa 230.53 153.6947026-48 3 BSP 1580kPa 364.71 243.1447026-64 4 BSP 1380kPa 591.01 394.01
Order Code Size Maximum Pressure RRP List Price
47026-02M 1/8 BSP 1500 kPa 8.42 5.6147026-04M 1/4 BSP 1500 kPa 8.42 5.6147026-06M 3/8 BSP 1500 kPa 8.47 5.6447026-08M 1/2 BSP 1500 kPa 10.18 6.79
Order Code Size Maximum Pressure RRP List Price
47072-02M 1/8 BSP 1500 kPa 8.34 5.5647072-04M 1/4 BSP 1500 kPa 8.34 5.5647072-06M 3/8 BSP 1500 kPa 8.47 5.6447072-08M 1/2 BSP 1500 kPa 9.97 6.64
Berlin series - F & F Full Bore Brass Ball Valve - Lever Handle
Order Code Size Maximum Pressure RRP List Price
47026-04G 1/4 BSP 4900kPa 12.51 8.3447026-06G 3/8 BSP 4900kPa 13.13 8.7647026-08G 1/2 BSP 4900kPa 15.45 10.3047026-12G 3/4 BSP 3900kPa 22.71 15.1447026-16G 1 BSP 3900kPa 31.67 21.1247026-20G 1 1/4 BSP 2950kPa 51.14 34.0947026-24G 1 1/2 BSP 2950kPa 73.85 49.2347026-32G 2 BSP 2480kPa 108.69 72.46
Berlin Series - M & F Full Bore Brass Ball Valve - Lever Handle
Order Code Size Maximum Pressure RRP List Price
47072-04G 1/4 BSP 4900kPa 13.13 8.76
47072-06G 3/8 BSP 4900kPa 14.14 9.4247072-08G 1/2 BSP 4900kPa 15.45 10.3047072-12G 3/4 BSP 3900kPa 22.71 15.1447072-16G 1 BSP 3900kPa 31.67 21.1247072-20G 1 1/4 BSP 2950kPa 51.14 34.0947072-24G 1 1/2 BSP 2950kPa 73.85 49.2347072-32G 2 BSP 2480kPa 108.69 72.46
All prices excluding GST Page 157
VA
LVE
S &
TA
PS
Berlin Series - F & F Full Bore Brass Ball Valve
Isis Series - F & F Full Bore Brass Ball Valve
Total Series - F & F Full Bore Brass Ball Valve
Berlin Series - M & F Full Bore Brass Ball Valve
Isis Series - F & F Full Bore Brass Ball Valve
Brass Ball Valves
Order Code Size Maximum Pressure RRP List Price
47026-04BG 1/4 BSP 4900kPa 12.36 8.2447026-06BG 3/8 BSP 4900kPa 12.98 8.6547026-08BG 1/2 BSP 4900kPa 15.45 10.3047026-12BG 3/4 BSP 3900kPa 22.71 15.1447026-16BG 1 BSP 3900kPa 31.67 21.12
Order Code Size Maximum Pressure RRP List Price
47072-04BG 1/4 BSP 4900kPa 13.13 8.7647072-06BG 3/8 BSP 4900kPa 14.14 9.4247072-08BG 1/2 BSP 4900kPa 15.45 10.3047072-12BG 3/4 BSP 3900kPa 22.71 15.1447072-16BG 1 BSP 3900kPa 31.67 21.12
Order Code Size Maximum Pressure RRP List Price
47026-04DR 1/4 BSP 4000kPa 37.67 25.1147026-06DR 3/8 BSP 4000kPa 37.67 25.1147026-08DR 1/2 BSP 4000kPa 34.22 22.8147026-12DR 3/4 BSP 4000kPa 46.27 30.8547026-16DR 1 BSP 4000kPa 68.34 45.5647026-20DR 1 1/4 BSP 2500kPa 111.86 74.5747026-24DR 1 1/2 BSP 2500kPa 179.53 119.6947026-32DR 2 BSP 2500kPa 270.22 180.15
Order Code Size Maximum Pressure RRP List Price
47026-04DREXT 1/4 BSP 4000kPa 56.01 37.3447026-06DREXT 3/8 BSP 4000kPa 56.01 37.3447026-08DREXT 1/2 BSP 4000kPa 56.01 37.3447026-20DREXT 1 1/4 BSP 2500kPa 171.23 114.1547026-24DREXT 1 1/2 BSP 2500kPa 234.96 156.64
Order Code Size Maximum Pressure RRP List Price
47026-02T 1/8 BSP 10000kPa 61.80 41.2047026-04T 1/4 BSP 10000kPa 61.80 41.2047026-06T 3/8 BSP 10000kPa 75.94 50.6247026-08T 1/2 BSP 10000kPa 84.25 56.1747026-12T 3/4 BSP 10000kPa 125.73 83.8247026-16T 1 BSP 10000kPa 174.32 116.2147026-20T 1 1/4 BSP 10000kPa 289.35 192.9047026-32T 2 BSP 4000kPa 675.44 450.30
All prices excluding GSTPage 158
VA
LVE
S &
TAP
S
Flare X Flare AGA Approved Gas Cock
Brass Ball Valves
Watermarked DZR - F & F Full Bore Brass Ball
Hipress Series - F & F Reduced Bore Brass Valve
Gar Ball Bibcock With Hose End
Order Code Tube Maximum Pressure RRP List Price
47017-05 5/16 4000kPa 38.75 25.8347017-06 3/8 4000kPa 36.51 24.3447017-08 1/2 4000kPa 29.86 19.9147017-12 3/4 4000kPa 40.02 26.68
Order Code Size Maximum Pressure RRP List Price
47026-08WDR 1/2 BSP 4000kPa 29.25 19.5047026-12WDR 3/4 BSP 4000kPa 39.37 26.2447026-16WDR 1 BSP 4000kPa 59.14 39.4347026-20WDR 1 1/4 BSP 2500kPa 96.64 64.4347026-24WDR 1 1/2 BSP 2500kPa 139.90 93.2747026-32WDR 2 BSP 2500kPa 204.48 136.32
Order Code Size Maximum Pressure RRP List Price
47026-06HP 3/8 BSP 21000kPa 141.83 94.5547026-08HP 1/2 BSP 21000kPa 164.36 109.5747026-12HP 3/4 BSP 21000kPa 256.28 170.8647026-16HP 1 BSP 21000kPa 326.15 217.43
Order Code Hose X BSP Maximum Pressure RRP List Price
47064-0806 1/2 x 3/8 1500kPa 21.74 14.4947064-1008 5/8 x 1/2 1500kPa 16.38 10.9247064-1212 3/4 x 3/4 1500kPa 23.21 15.4747064-1616 1 x 1 1170kPa 43.12 28.75
All prices excluding GST Page 159
VA
LVE
S &
TA
PS
Triflux Full Bore 3 Way Ball Valve Side Entry T-Port
3 Way Ball Valve - Bottom Entry L-Port
Swing Check Valve
3 Way Ball Valve - Side Entry L-Port
"Y" Strainer
Brass 3 Way Ball Valves
Order Code Size Maximum Pressure RRP List Price
47035-04TRI 1/4 BSP 4000kPa 326.33 217.5647035-06TRI 3/8 BSP 4000kPa 326.33 217.5647035-08TRI 1/2 BSP 4000kPa 326.33 217.5647035-12TRI 3/4 BSP 4000kPa 392.48 261.6547035-16TRI 1 BSP 2500kPa 556.43 370.9547035-20TRI 1 1/4 BSP 1600kPa 730.71 487.1447035-24TRI 1 1/2 BSP 1600kPa 970.65 647.1047035-32TRI 2 BSP 1600kPa 1307.84 871.90
Order Code Size Maximum Pressure RRP List Price
47035-04SEL 1/4 BSP 2480kPa 72.49 48.3347035-06SEL 3/8 BSP 2480kPa 72.49 48.3347035-08SEL 1/2 BSP 2480kPa 72.49 48.3347035-12SEL 3/4 BSP 2480kPa 112.79 75.1947035-16SEL 1 BSP 2480kPa 168.13 112.0847035-20SEL 1 1/4 BSP 2480kPa 252.27 168.1847035-24SEL 1 1/2 BSP 2480kPa 364.33 242.8847035-32SEL 2 BSP 2480kPa 655.99 437.33
Order Code Size Maximum Pressure RRP List Price
47035-04BEL 1/4 BSP 1600kPa 161.30 107.5347035-06BEL 3/8 BSP 1600kPa 161.30 107.5347035-08BEL 1/2 BSP 1600kPa 161.30 107.5347035-12BEL 3/4 BSP 1600kPa 190.39 126.93
Order Code Size Maximum Pressure RRP List Price
23075-04 1/4 BSP 2000kPa 11.05 7.3623075-06 3/8 BSP 2000kPa 11.08 7.3923075-08 1/2 BSP 2000kPa 15.84 10.5623075-12 3/4 BSP 2000kPa 16.81 11.2123075-16 1 BSP 2000kPa 26.57 17.7223075-20 1 1/4 BSP 2000kPa 39.55 26.3723075-24 1 1/2 BSP 2000kPa 52.36 34.9123075-32 2 BSP 2000kPa 87.06 58.0423075-48 3 BSP 1580kPa 289.52 193.01
Order Code Size Maximum Pressure RRP List Price
23004-08 1/2 BSP 1170kPa 16.27 10.8523004-12 3/4 BSP 1170kPa 22.62 15.0823004-16 1 BSP 1170kPa 31.64 21.0923004-20 1 1/4 BSP 960kPa 46.13 30.7623004-24 1 1/2 BSP 960kPa 59.44 39.6223004-32 2 BSP 960kPa 84.45 56.3023004-40 2 1/2 BSP 750kPa 132.50 88.33
All prices excluding GSTPage 160
VA
LVE
S &
TAP
S
Brass Gate Valve - Untested
Valstop Check Valves - C/W Viton O-Ring
Miscellaneous Valves
York Check & Foot Valves
York Check & Foot Valves - Strainer Only
Order Code Size Maximum Pressure RRP List Price
23003-04* 1/4 BSP 820kPa 13.89 9.2623003-06* 3/8 BSP 820kPa 13.89 9.2623003-08 1/2 BSP 820kPa 11.97 7.9823003-12 3/4 BSP 820kPa 14.06 9.3723003-16 1 BSP 820kPa 19.78 13.1823003-20 1 1/4 BSP 820kPa 30.90 20.6023003-24 1 1/2 BSP 820kPa 41.10 27.4023003-32 2 BSP 820kPa 59.30 39.5323003-40* 2 1/2 BSP 820kPa 122.06 81.3723003-48* 3 BSP 820kPa 151.46 100.9723003-64* 4 BSP 820kPa 273.74 182.50
Order Code Size Maximum Pressure RRP List Price
23151-06 3/8 BSP 1170kPa 11.23 7.4923151-08 1/2 BSP 1170kPa 11.17 7.4523151-12 3/4 BSP 1170kPa 15.77 10.5223151-16 1 BSP 1170kPa 20.50 13.6723151-20 1 1/4 BSP 960kPa 29.71 19.8123151-24 1 1/2 BSP 960kPa 44.88 29.9223151-32 2 BSP 960kPa 62.56 41.7023151-40 2 1/2 BSP 750kPa 117.71 78.4823151-48 3 BSP 750kPa 167.45 111.6323151-64 4 BSP 750kPa 289.80 193.20
Order Code Size Maximum Pressure RRP List Price
23151-04V 1/4 BSP 4800kPa 43.34 28.8923151-06V 3/8 BSP 4800kPa 43.34 28.8923151-08V 1/2 BSP 4000kPa 46.09 30.7223151-12V 3/4 BSP 3500kPa 56.05 37.3723151-16V 1 BSP 3000kPa 74.78 49.8523151-24V 1 1/2 BSP 2500kPa 157.87 105.2523151-32V 2 BSP 2000kPa 257.86 171.91
Order Code Size RRP List Price
23154-06 3/8 BSP 3.48 2.3223154-08 1/2 BSP 3.68 2.4523154-12 3/4 BSP 4.06 2.7123154-16 1 BSP 4.64 3.0923154-20 1 1/4 BSP 6.06 4.0423154-24 1 1/2 BSP 7.99 5.3323154-32 2 BSP 10.04 6.7023154-40 2 1/2 BSP 20.09 13.3923154-48 3 BSP 24.78 16.5223154-64 4 BSP 33.48 22.32
To convert a check valve to a foot valve, simply mate equivalent sized valve and filter
*While stocks last
All prices excluding GST Page 161
VA
LVE
S &
TA
PS
Miscellaneous Valves
Drain Cock External Seat
90˚ Bib Drain Cock
Air Tank Drain Valve
Order Code Description RRP List Price
6788 1/4" NPT External Seat Drain Cock 6.29 4.19
Order Code Description RRP List Price
120 1/4" NPT 90˚ Angle Bib Drain Cock 26.91 17.94
Order Code Description RRP List Price
140 1/4" NPT Internal Seat Drain Cock 14.17 9.45
Order Code Description RRP List Price
1425A 1/4" NPT Internal Seat Drain Valve 15.19 10.12
Drain Cock Internal Seat
Drain Valve
Order Code Description RRP List Price
1421-60 1/4" NPT Air Tank Drain Valve Looped 28.80 19.201421-60A 1/4" NPT Air Tank Drain Valve Non-Looped 73.97 49.32
All prices excluding GSTPage 162
VA
LVE
S &
TAP
S
Truck Valves
Hose Shut Off Valve
Hose Truck Valve
M & F Truck Valve
Order Code Description RRP List Price
1423 5/8 x 3/8 NPT 90° Hose Shut Off Valve 63.18 42.121433 3/4 x 3/8 NPT 90° Hose Shut Off Valve 81.47 54.311451 3/4 x 1/2 NPT 90° Hose Shut Off Valve 97.04 64.69
Order Code Description RRP List Price
7504 5/8 x 3/8 NPT 90˚ Truck Valve 72.41 48.28
7502 5/8 x 1/2 NPT 90˚ Truck Valve 49.30 32.87
Order Code Description RRP List Price
211280A 5/8 x 3/8 NPT 90˚ Hose Drain Cock 32.88 21.92
Hose Drain Cock
Order Code Description RRP List Price
7509 3/8 x 3/8 M&F NPT 90˚ Truck Valve 78.19 52.13
7508 1/2 x 1/2 M&F NPT 90˚ Truck Valve 36.89 24.60
All prices excluding GST Page 163
VA
LVE
S &
TA
PS
1 - Piece Stainless Steel - Reduced Bore Ball Valve
3 - Piece Stainless Steel - Full Bore Ball Valve
No NV105 Male Needle Valve
2 - Piece Stainless Steel - Full Bore Ball Valve
No NV104 Female Needle Valve
Stainless Steel Ball Valves - 316 Grade
Order Code Size Maximum Pressure RRP List Price
711026-04 1/4 BSP 7000kPa 39.51 26.34711026-06 3/8 BSP 7000kPa 41.61 27.74711026-08 1/2 BSP 7000kPa 44.53 29.68711026-12 3/4 BSP 7000kPa 56.13 37.42711026-16 1 BSP 7000kPa 76.74 51.16711026-20 1 1/4 BSP 7000kPa 115.55 77.03711026-24 1 1/2 BSP 4900kPa 173.32 115.55711026-32 2 BSP 4900kPa 209.50 139.67
Order Code Size Maximum Pressure RRP List Price
712026-04 1/4 BSP 8600kPa 49.30 32.87712026-06 3/8 BSP 8600kPa 48.27 32.18712026-08 1/2 BSP 8600kPa 51.28 34.19712026-12 3/4 BSP 8600kPa 64.43 42.95712026-16 1 BSP 7100kPa 91.66 61.11712026-24 1 1/2 BSP 7100kPa 161.76 107.84712026-32 2 BSP 6200kPa 233.53 155.68
Order Code Size Maximum Pressure RRP List Price
713026-06 3/8 BSP 8600kPa 63.96 42.64713026-08 1/2 BSP 8600kPa 74.27 49.51713026-12 3/4 BSP 8600kPa 100.32 66.88713026-16 1 BSP 7100kPa 131.62 87.75713026-20 1 1/4 BSP 7100kPa 166.60 111.06713026-24 1 1/2 BSP 7100kPa 245.08 163.39713026-32 2 BSP 6200kPa 344.07 229.38
Order Code Size Maximum Pressure RRP List Price
041026-02 1/8 BSP 2600kPa 30.79 20.53041026-04 1/4 BSP 2600kPa 30.79 20.53041026-06 3/8 BSP 2600kPa 40.32 26.88
Order Code Size Maximum Pressure RRP List Price
041027-02 1/8 BSP 2600kPa 35.74 23.82041027-04 1/4 BSP 2600kPa 33.26 22.18
All prices excluding GSTPage 164
VA
LVE
S &
TAP
S
No NV404/808 Male & Female Needle Valve
No NV43 - Compression Needle Valve
Needle Valves
No NV40 - Flare Needle Valve
No NV41 - Compression Needle Valve
Order Code Size Maximum Pressure RRP List Price
041072-02 1/8 BSP 2600kPa 34.81 23.21041072-04 1/4 BSP 2600kPa 37.31 24.87
Order Code Tube x BSP Maximum Pressure RRP List Price
041008-0402 1/4 x 1/8 2600kPa 36.46 24.31 041008-0502* 5/16 x 1/8 2600kPa 36.46 24.31041008-0604 3/8 x 1/4 2600kPa 37.08 24.72
Order Code Tube x BSP Maximum Pressure RRP List Price
041003-0302 3/16 x 1/8 2600kPa 42.26 28.17041003-0402 1/4 x 1/8 2600kPa 33.77 22.52
Order Code Tube x BSP Maximum Pressure RRP List Price
041005-0402 1/4 x 1/8 2600kPa 34.25 22.84041005-0604 3/8 x 1/4 2600kPa 45.31 30.21
No NVP40 - Barb Needle Valve
Order Code Hose x BSP Maximum Pressure RRP List Price
041606-0302 3/16 x 1/8 2600kPa 46.63 31.09041606-0402 1/4 x 1/8 2600kPa 44.31 29.54041606-0502 5/16 x 1/8 2600kPa 44.00 29.33041606-0504 5/16 x 1/4 2600kPa 49.18 32.78041606-0604 3/8 x 1/4 2600kPa 51.29 34.20
*While stocks last
All prices excluding GST Page 165
VA
LVE
S &
TA
PS
No 104 Female Lever Tap
No DT3 Drain Tap
No 404/808 Male & Female Lever Tap
No DB1 Bent Drain Tap
Lever Taps
Order Code Size Maximum Pressure RRP List Price
042026-02 1/8 BSP 410kPa 29.54 19.69042026-04 1/4 BSP 410kPa 29.54 19.69
Order Code Size Maximum Pressure RRP List Price
042072-02 1/8 BSP 410kPa 24.67 16.45042072-04 1/4 BSP 410kPa 24.92 16.61
Order Code Size Maximum Pressure RRP List Price
042064-B02 1/8 BSP 410kPa 29.62 19.75042064-B04 1/4 BSP 410kPa 29.62 19.75042064-B04C 1/4 BSP Chrome 410kPa 33.31 22.21042064-B05 5/16 Wood Screw 410kPa 43.20 28.80042064-B06 3/8 BSP 410kPa 66.64 44.42042064-B06C 3/8 BSP Chrome 410kPa 63.73 42.49
Order Code Size Maximum Pressure RRP List Price
042064-02 1/8 BSP 410kPa 23.44 15.63042064-04 1/4 BSP 410kPa 23.44 15.63042064-06 3/8 BSP 410kPa 40.48 26.99
All prices excluding GSTPage 166
VA
LVE
S &
TAP
S
No JT3 Hose Tap
No T3/T6 Solder On Tap
Lever Taps
No CT3 Compression Tap
No T8 Solder On Tap
Order Code Tube x BSP Maximum Pressure RRP List Price
042603-0302 3/16 x 1/8 410kPa 24.43 16.28042603-0402 1/4 x 1/8 410kPa 24.43 16.28042603-0502 5/16 x 1/8 410kPa 24.43 16.28042603-0602 3/8 x 1/8 410kPa 24.43 16.28
Order Code Tube x BSP Maximum Pressure RRP List Price
042003-0302 3/16 x 1/8 410kPa 25.43 16.95042003-0402 1/4 x 1/8 410kPa 25.66 17.11042003-0404 1/4 x 1/4 410kPa 25.66 17.11042003-0502 5/16 x 1/8 410kPa 25.91 17.27042003-0504 5/16 x 1/4 410kPa 25.91 17.27
Order Code Tube x BSP Maximum Pressure RRP List Price
042046-0202 1/8 x 1/8 410kPa 25.43 16.95042046-0302 3/16 x 1/8 410kPa 25.43 16.95042046-0402 1/4 x 1/8 410kPa 25.66 17.11042046-0404 1/4 x 1/4 410kPa 25.66 17.11042046-0502 5/16 x 1/8 410kPa 25.91 17.27
042046-0604 3/8 x 1/4 410kPa 48.61 32.40 042046-0606 3/8 x 3/8 410kPa 46.40 30.93 042046-0806 1/2 x 3/8 410kPa 78.96 52.64 042046-0808 1/2 x 1/2 410kPa 78.96 52.64
Order Code Tube Maximum Pressure RRP List Price
042047-04 1/4 (T8) 410kPa 28.13 18.76
All prices excluding GST Page 167
VA
LVE
S &
TA
PS
No 30 Drain Cock
No 406 Safety Valve
Tank Valves - Schrader
No 208 Non Return Valve
Miscellaneous Valves
Order Code Size Maximum Pressure RRP List Price
043030-02 1/8 BSP 3500kPa 7.34 4.89043030-04 1/4 BSP 3500kPa 9.32 6.21043030-06 3/8 BSP 3500kPa 13.06 8.70043030-08 1/2 BSP 3500kPa 18.96 12.64
Order Code Size RRP List Price
046406-1035-04 1/4 BSP 21.03 14.02046406-1035-08 1/2 BSP 59.58 39.72
Order Code Tube x BSP Maximum Pressure RRP List Price
046208-08 3/16 x 1/2 1200kPa 31.36 20.91
Order Code BSP RRP List Price
067-9392 1/8 BSP Male with Cap 14.99 9.99067-9393 1/8 BSP Male with Cap-Extended 15.45 10.30
No 30 Drain Cock - NPT
Order Code Size Maximum Pressure RRP List Price
135 1/8 NPT 1000kPa 4.84 3.22145 1/4 NPT 1000kPa 5.39 3.59270 3/8 NPT 1000kPa 16.04 10.69108 1/2 NPT 1000kPa 35.54 23.69
All prices excluding GSTPage 168
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
• Clear (blue tint)
• 2070 (food contact)
Recommended safety factor of 4:1 at 20°C
Low pressure food or beverage lines, general delivery or drainage lines and cable protection
Foodstuff
Air
Fluids
Petrol
Oil
• -20°C to +60°C
Clear Vinyl Tube (CVT)
Colour
Australian Standard
Note
Media / Application
Operating Temperature
Design Features• Non-toxic, does not taint liquids, clear for ease of inspection, light weightandflexible
All prices excluding GST Page 169
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
• Blue
• 2554 Class B
Air tools, general pneumatic lines, non-drinking water lines
Air
Water
• -20°C to +60°C
Uniflex Air Line Hose (Reinforced PVC)
Colour
Australian Standard
Media / Application
Operating Temperature
Design Features• Remainsflexibleatverylowtemperatures,goodweathering properties, high abrasion resistance, braided for added strength
NoteRecommended safety factor of 4:1 at 20°C
All prices excluding GSTPage 170
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
• Black
Electrical transfer point between prime mover and trailer
Electracoils are nylon coated, 7 core. Electracoils are supplied either unfittedorfittedwithmetalorplastic plugs.
Electracoil Electrical Cable
Colour
Application
Note
All prices excluding GST Page 171
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
• Clear(redandgoldidentificationspiral)
• 2070 (food contact)
Fuel lines, general pneumatic lines, food and water lines
Petrol (Suitable for fuel transfer only)
Oil
Foodstuff
Air
Petrol
• 0°C to +60°C
Petrol Resistant/Food Contact Hose (Reinforced PVC)
Colour
Australian Standard
Media/Application
Operating Temperature
Design Features• High abrasion resistance, good weathering properties, incredibly versatile, braided for added strength.
NoteRecommended safety factor of 4:1 at 20°C.
All prices excluding GSTPage 172
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
• Black and Natural on request include Red, Green Blue and Yellow
Fuel, pneumatic, hydraulic and drainage lines, and cable protection
Air
Petrol
Oil
Diesel
Grease
Brake Fluid
Water (non-drinking)
• -20˚Cto+80˚C
• 250psi
Blueline Flexible Nylon Tube – Imperial (Nylon 12)
Colour
Media / Application
Operating Temperature
Working Pressure
Note1. Recommended safety factor of 4:1 at 20°C. Recommended tube spigot for use with No. 100 universal sleeve 05100.
2. Manufactured using heat and light stabilised Nylon.
All prices excluding GST Page 173
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
Blueline Flexible Nylon Tube – Metric (Nylon 12)
Colour • Black and Natural
• Others available on request Red, Green Blue and Yellow
Fuel, pneumatic and hydraulic lines, and cable protection
Air
Petrol
Oil
Diesel
Grease
Brake Fluid
Water (non-drinking)
• 2000kPa
• -20˚Cto+80˚C
Media / Application
Working Pressure
Operating Temperature
Note1. Recommended safety factor of 4:1 at 25°C. Recommended tube spigot for use with No. 100 universal sleeve 32100.
2. Manufactured using heat and light stabilised Nylon.
All prices excluding GSTPage 174
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
• 625psi
Working Pressure
Yellowline Semi-Rigid Nylon Tube – Imperial (Nylon 12)
Colour • Black only
Fuel lines, pneumatic and hydraulic lines
Air
Petrol
Oil
Diesel
Grease
Brake Fluid
Water (non-drinking)
• -20˚Cto+80˚C
Media / Application
Operating Temperature
Note1. Recommended safety factor of 4:1 at 25°C. Recommended tube spigot for use with No. 100 universal sleeve 05100 – YL.
2. Manufactured using heat and light stabilised Nylon.
All prices excluding GST Page 175
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
Self Store Recoil Nylon Hose – Imperial (Nylon 12)
Colour • Yellow
Pneumatic hand tools, robotics, tyre pressure lines, and wash down areas
Air
Water (non-drinking)
• -20˚Cto+80˚C
Media / Application
Operating Temperature
NoteRecommended safety factor of 4:1 at 25°C. Recoil hose and fittings should be ordered separately. Recommended fittings sold per hose end 06775.
All prices excluding GSTPage 176
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
• Black, Red, Blue
• SAEJ844TypeA–SingleWall(1/8to5/16O.D.)
• SAEJ844TypeB–TwinWallReinforced Imperial(3/8to3/4O.D.) Metric (10mm & 12mm O.D.)
Air brake and auxiliary systems, fuel lines
Air
Petrol
• -40˚Cto+93˚C
• 150psi
J844 Air Brake Nylon Tube – Imperial (Nylon 12)
Colour
Standards
Media/Application
Operating Temperature
Working Pressure
Note1. Recommendedsafetyfactorof4:1at20˚C. Recommended tube spigotforusewithNo.100universalsleeve34099–BR.
2. Manufactured using heat and light stabilised Nylon.
All prices excluding GST Page 177
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
DIN 74324 Air Brake Nylon Tube – Metric (Nylon 12)
Colour • Black, Red, Blue
• DIN 74324 – Single Wall
• -40˚Cto+93˚C
• 1020kPa
Standards
Operating Temperature
Working Pressure
Note1. Recommended safety factor of 4:1 at 25°C.
2. Manufactured using heat and light stabilised Nylon.
Media/Application Air and auxiliary systems, fuel lines.
Air
Petrol
Water
All prices excluding GSTPage 178
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
Nitex Nylon Tube – Imperial (Nylon 12)
Colour • Black
• Single Wall
• -20˚Cto+80˚C
Construction
Operating Temperature
Note1. Recommended safety factor of 4:1 at 25°C. Recommended tube spigotforusewithNo.100universalsleeve34099–SW.Shouldnotbe used between the compressor and tank.
2. Manufactured using heat and light stabilised Nylon.
Media / Application Air and auxiliary systems, fuel lines
Air
Petrol
Water
All prices excluding GST Page 179
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
PVC Hose Tube
Suzi Coil (J844 Nylon 12)
Colour • 1 x Red coil and 1 x Blue coil
• SAEJ844TypeB–Reinforced
• -20˚Cto+93˚C
• 150psi
Standards
Operating Temperature
Working Pressure
Note1. Recommended safety factor of 4:1 at 25°C. Suzi Coils are supplied with fittings and springs.
2. Manufactured using heat and light stabilised Nylon.
Media / Application Air transfer point between prime mover and trailer
Air
All prices excluding GSTPage 180
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Uniflex Airline Hose (Reinforced PVC) – Yellow Stripe
Uniflex Airline Hose Assemblies
PVC Hose & Assemblies
Order Code NOM ID NOM OD Working Pressure
Burst Pressure
Coil Length
RRP Per Coil
List Per Coil
13904-04 1/4(6mm) 12.4mm 1600kPa 6400kPa 20m 59.40 39.6013904-06 3/8(10mm) 16.4mm 1600kPa 6400kPa 20m 65.10 43.4013904-08 1/2(12mm) 18.9mm 1600kPa 6400kPa 20m 90.30 60.20
13904-100-04 1/4(6mm) 12.4mm 1600kPa 6400kPa 100m 297.00 198.0013904-100-05 5/16(8mm) 14.0mm 1600kPa 6400kPa 100m 307.50 205.0013904-100-06 3/8(10mm) 16.4mm 1600kPa 6400kPa 100m 325.50 217.0013904-100-08 1/2(12mm) 18.9mm 1600kPa 6400kPa 100m 451.50 301.0013904-300-06 3/8(10mm) 16.4mm 1600kPa 6400kPa 300m 976.50 651.00
Order Code NOM ID Hose Length
Fitting style Coupling Adaptor RRP
Per CoilList
Per Coil
13904-20-06N 3/8(10mm) 20m Nitto 30SH 30PH 109.31 72.8713904-20-06R 3/8(10mm) 20m Ryco 241S 206AS 88.23 58.8213904-30-06N 3/8(10mm) 30m Nitto 30SH 30PH 135.06 90.04
Order Code NOM ID NOM OD Working Pressure
Burst Pressure
Coil Length
RRP Per Coil
List Per Coil
13904-06S 3/8(10mm) 16.4mm 1600kPa 6400kPa 20m 67.20 44.8013904-08S 1/2(12mm) 18.9mm 1600kPa 6400kPa 20m 92.40 61.60
Uniflex Airline Hose (Reinforced PVC)
All prices excluding GST Page 181
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Petrol Resistant/Food Contact Hose (Reinforced PVC)
PVC Airline Hose & Assemblies
Order Code NOM ID NOM OD Working Pressure
Burst Pressure
Coil Length
RRP Per Coil
List Per Coil
13350-04 1/4(6mm) 11.0mm 1600kPa 6400kPa 20 57.60 38.4013350-05 5/16(8mm) 13.0mm 1600kPa 6400kPa 20 63.60 42.4013350-06 3/8(10mm) 17.0mm 1600kPa 6400kPa 20 78.00 52.0013350-08 1/2(12mm) 18.1mm 1600kPa 6400kPa 20 102.00 68.0013350-10 5/8(16mm) 22.0mm 1600kPa 6400kPa 20 125.10 83.4013350-12 3/4(19mm) 27.6mm 1600kPa 6400kPa 20 201.00 134.0013350-16 1 (25mm) 33.5mm 1600kPa 6400kPa 20 273.60 182.40
13350-100-06 3/8(10mm) 17.0mm 1600kPa 6400kPa 100 390.00 260.0013350-100-08 1/2(12mm) 18.1mm 1600kPa 6400kPa 100 510.00 340.00
All prices excluding GSTPage 182
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Clear Vinyl & Polyurethane Tubing
Clear Vinyl Tube (CVT)
Order Code NOM ID NOM OD Working Pressure
Coil Length
RRP Per Coil
List Per Coil
15333-03 3/16(5mm) 8mm 700kPa 30m 33.75 22.5015333-04 1/4(6mm) 9mm 600kPa 30m 36.45 24.3015333-05 5/16(8mm) 11mm 500kPa 30m 40.50 27.0015333-06 3/8(10mm) 13mm 400kPa 30 47.70 31.8015333-08 1/2(12mm) 15mm 400kPa 30 63.00 42.0015333-10 5/8(16mm) 19mm 400kPa 30 85.50 57.0015333-12 3/4(19mm) 23mm 295kPa 30 126.00 84.0015333-16 1 (25mm) 31mm 295kPa 30 224.10 149.4015333-32 2 (50mm) 58mm 175kPa 30 630.45 420.30
Spiral Polyurethane Coils – Unfitted
Order Code NOM OD NOM IDWorking Pressure
Working Length
Tail Length RRP List
146-415 4.0mm 2.0mm 900kPa 1.2m 50mm 6.32 4.21146-430 4.0mm 2.0mm 900kPa 2.8m 50mm 12.64 8.43146-445 4.0mm 2.0mm 900kPa 4.0m 50mm 18.97 12.65146-615 6.0mm 4.0mm 900kPa 1.2m 70mm 7.25 4.83146-630 6.0mm 4.0mm 900kPa 2.8m 70mm 14.51 9.67146-650 6.0mm 4.0mm 900kPa 4.0m 70mm 24.16 16.11146-675 6.0mm 4.0mm 900kPa 6.0m 70mm 26.77 17.85
146-6100 6.0mm 4.0mm 900kPa 8.0m 70mm 33.87 22.58146-835 8.0mm 5.0mm 900kPa 2.8m 80mm 24.67 16.45146-850 8.0mm 5.0mm 900kPa 4.0m 80mm 34.86 23.24146-875 8.0mm 5.0mm 900kPa 6.0m 80mm 52.28 34.86146-8100 8.0mm 5.0mm 900kPa 8.0m 80mm 69.69 46.46146-1030 10.0mm 6.5mm 900kPa 2.8m 90mm 33.46 22.31146-1050 10.0mm 6.5mm 900kPa 4.0m 90mm 47.82 31.88146-1075 10.0mm 6.5mm 900kPa 6.0m 90mm 71.73 47.82
146-10100 10.0mm 6.5mm 900kPa 8.0m 90mm 96.78 64.52146-1230 12.0mm 8.0mm 900kPa 2.8m 100mm 42.05 28.04146-1250 12.0mm 8.00m 900kPa 4.0m 100mm 60.12 40.08146-1275 12.0mm 8.0mm 900kPa 6.0m 100mm 90.17 60.11
146-12100 12.0mm 8.0mm 900kPa 8.0m 100mm 120.23 80.15
Tospecifycolourotherthanblackaddsuffixtoordercode(B = Blue, Y = Yellow, N = Natural, R = Red)Please note: Not all colours available in all sizes.
All prices excluding GST Page 183
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Braided Polyurethane Recoil Hose
Clear Vinyl & Polyurethane Tubing
Polyurethane Tubing
Order Code NOM OD NOM IDWorking Pressure
Burst Pressure
Coil LengthRRP
Per CoilList
Per Coil
147-M10 10.0mm 6.5mm 900kPa 2500kPa 100m 768.00 512.00147-M10B 10.0mm 6.5 mm 900kPa 2500kPa 100m 768.00 512.00
147-04 1/4 4.2mm 900kPa 2500kPa 100m 337.50 225.00147-04B 1/4 4.2mm 900kPa 2500kPa 100m 337.50 225.00
Order Code NOM OD NOM IDWorking Pressure
Coil Length RRP List
T06-1005TF 10mm 6.5mm 2000kPa 5m 42.18 28.12T06-1008TF 10mm 6.5mm 2000kPa 8m 44.81 29.87T06-1010TF 10mm 6.5mm 2000kPa 10m 51.45 34.30T06-1205TF 12mm 8mm 2000kPa 5m 46.81 31.21T06-1208TF 12mm 8mm 2000kPa 8m 54.08 36.05T06-1210TF 12mm 8mm 2000kPa 10m 62.57 41.72
Completewith1/4BSPSwivelFittingsandStrainReliefSprings
B=BlueTube
All prices excluding GSTPage 184
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Nylon Tubing
Blueline Flexible Nylon Tube – Imperial
Yellowline – Semi-Rigid Nylon Tube – Imperial – Black and Natural Only
Self Store Hose Fitting
Blueline – Flexible Nylon Tube – Metric
Self Store – Recoil Nylon Hose
Order Code Part No Tube x BSP RRP Price List Price
06775-0404 SS4M4 1/4x1/4 30.02 20.0106775-0604 SS6M4 3/8x1/4 36.51 24.3406775-0606 SS6M6 3/8x3/8 36.51 24.34
Order Code Reel Length NOM ID Working
LengthWorking Pressure
Burst Pressure
RRPPer Coil
ListPer Coil
16077-04 30m 1/4 28m 180psi 720 psi 112.50 75.0016077-06 30m 3/8 26m 180psi 720 psi 170.55 113.7016077-08 30m 1/2 23m 150 psi 600 psi 315.90 210.60
Order CodeReel
LengthNOM OD NOM ID
Working Pressure
Burst Pressure
RRP Per Coil
ListPer Coil
14125-02 100m 1/8 .078" 625 psi 2500 psi 114.00 76.0014125-03 100m 3/16 .110" 625 psi 2500 psi 208.50 139.0014125-04 100m 1/4 .147" 625 psi 2500 psi 271.50 181.0014125-05 100m 5/16 .186" 625 psi 2500 psi 459.00 306.0014125-06 100m 3/8 .224" 625 psi 2500 psi 625.50 417.0014125-08 100m 1/2 .303" 625 psi 2500 psi 1095.00 730.00
Tospecifycolourotherthanblackaddsuffixtoordercode(B = Blue, Y = Yellow, N = Natural, R = Red)
Tospecifycolourotherthanblackaddsuffixtoordercode(B = Blue, Y = Yellow, N = Natural, R = Red)
Order CodeReel
LengthNOM OD NOM ID
Working Pressure
Burst Pressure
RRP Per Coil
ListPer Coil
14110-M04 100 4mm 2.7mm 2000kPa 8000kPa 114.00 76.0014110-M05 100 5mm 3.3mm 2000kPa 8000kPa 235.50 157.0014110-M06 100 6mm 4.0mm 2000kPa 8000kPa 198.00 132.0014110-M08 100 8mm 5.2mm 2000kPa 8000kPa 360.00 240.0014110-M10 100 10mm 6.6mm 2000kPa 8000kPa 501.00 334.0014110-M12 100 12mm 8.0mm 2000kPa 8000kPa 730.50 487.00
14110-300-M06 300 6mm 4.0mm 2000kPa 8000kPa 612.00 408.0014110-300-M08 300 8mm 5.2mm 2000kPa 8000kPa 1102.50 735.0014110-300-M10 300 10mm 6.6mm 2000kPa 8000kPa 1525.50 1017.00
Order Code Reel Length NOM OD NOM IDWorking Pressure
Burst Pressure
RRP Per Coil
List Per Coil
14110-02 100m 1/8 .087" 250 psi 1000 psi 105.00 70.0014110-03 100m 3/16 .125" 250 psi 1000 psi 156.00 104.0014110-04 100m 1/4 .169" 250 psi 1000 psi 204.00 136.0014110-05 100m 5/16 .214" 250 psi 1000 psi 307.50 205.0014110-06 100m 3/8 .258" 250 psi 1000 psi 427.50 285.0014110-08 100m 1/2 .347" 250 psi 1000 psi 730.50 487.00
14110-300-04 300 1/4 .169" 250 PSI 1000 PSI 634.50 423.0014110-500-05 500 1/4 .169" 250 PSI 1000 PSI 1042.50 695.00
All prices excluding GST Page 185
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
J844 Air Brake Nylon Tube – Imperial
DIN 74324 Air Brake Nylon Tube – Metric
J844 Air Brake Nylon Tube – Type B Metric
Nylon Tubing
Order CodeReel
LengthNOM OD NOM ID
Working Pressure
RRP Per Coil
List Per Coil
14337-02 (Black only) 100 1/8 .80" 150psi 130.50 87.0014337-04 100 1/4 .170" 150psi 229.50 153.0014337-05 100 5/16 .236" 150psi 292.50 195.0014337-06 100 3/8 .251" 150psi 615.00 410.0014337-08 100 1/2 .376" 150psi 756.00 504.0014337-10 100 5/8 .441" 150psi 1356.00 904.00
14337-12 (Black only) 100 3/4 .566" 150psi 2035.50 1357.0014337-50-04 50 1/4 .170" 150psi 114.75 76.5014337-50-05 50 5/16 .236" 150psi 146.25 97.5014337-50-06 50 3/8 .251" 150psi 307.50 205.0014337-50-08 50 1/2 .376" 150psi 378.00 252.0014337-50-10 50 5/8 .441" 150psi 678.00 452.00
14337-150-06 150 3/8 .251" 150psi 922.50 615.0014337-150-08 150 1/2 .376" 150psi 1134.00 756.0014337-250-02 250 1/8 .80" 150psi 348.75 232.5014337-250-04 250 1/4 .170" 150psi 600.00 400.00
Order Code Reel Length NOM OD NOM IDWorking Pressure
RRP Per Coil
List Per Coil
14337-M10 100m 10mm 7mm 2050kPa 676.50 451.0014337-M12 100m 12mm 9mm 1700kPa 877.50 585.00
Order CodeReel
LengthNOM OD NOM ID
Working Pressure
RRP Per Coil
List Per Coil
14338-M06(Blackonly) 100m 6mm 4.0mm 1020kPa 208.50 139.0014338-M08 100m 8mm 6.0mm 1020kPa 339.00 226.00
14338-M10 100m 10mm 8.0mm 1020kPa 547.50 365.00
14338-M12 100m 12mm 9.0mm 1020kPa 730.50 487.0014338-M15 100m 15mm 12mm 1020kPa 1356.00 904.0014338-M16 100m 16mm 12mm 1020kPa 1660.50 1107.00
Self store Nylon Olives
Order Code Part No Tube RRP Price List Price
06776-04 SS4 1/4 3.14 2.0906776-06 SS6 3/8 3.24 2.1606776-08 SS8 1/2 4.64 3.09
*6mmand8mmtubemeetsbothDIN74324andJ844standards.
All prices excluding GSTPage 186
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Suzi Coil (J844 Nylon)
Order Code Tube Length Tail Length Working
LengthWorking Pressure
RRP Per Set
List Per Set
14210-08SET 6m 8"(Short) 3.0m 150 psi 141.60 94.4014210-08SETL 7m 39"(Long) 3.7m 150 psi 151.02 100.68
Nylon Tubing
Suzi Coil (J844 Nylon) – Unfitted Single Red or Blue
Suzi Coil (J844 Nylon) – Unfitted Single Black
Order Code Size Tube Length Tail Length Working
LengthWorking Pressure RRP List Price
14210-B08 1/2" 5m 8"(Short) 3.0m 150 psi 47.12 31.4214210-R08 1/2" 5m 8"(Short) 3.0m 150 psi 47.12 31.42
Order Code Size Working Length Working Pressure RRP List Price
14219 3/8" 20m 150 psi 245.66 163.7714220 1/2" 20m 150 psi 250.88 167.25
Electracoil – Electrical Cable
Electracoil – Electrical Cable C/W Plastic Plugs
Electracoil – Electrical Cable C/W Metal Plugs
Order Code Tube Length Tail Length Wire
ODWire
AmperageWorking Length
RRP Per Coil
List Per Coil
14215E* 5m 8"(Short) 4mm 15 3.7m 151.98 101.32
Order Code Tube Length Tail Length Wire ODWire
AmperageRRP
Per CoilList
Per Coil
14215ELM 3.7m 39"(Long) 4mm 15 234.67 156.45
Order Code Tube Length Tail Length Wire
ODWire
AmperageRRP Per
Coil List Per Coil
14215EP* 3.7m 8"(Short) 4mm 15 213.69 142.46
1421ELP* 3.7m 39"(Long) 4mm 15 230.42 153.61
*While stocks last
*While stocks last
*While stocks last
All prices excluding GST Page 187
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Low Density Polyethylene Tube – Imperial
Low Density Polyethylene Tube – Metric
Polyethylene Tubing
Order Code Reel Length NOM OD NOM ID Working Pressure
Burst Pressure
RRP Per Coil
List Per Coil
14340-04 100m 1/4 0.164" 120psi 360psi 109.50 73.0014340-05** 100m 5/16 0.210" 120psi 360psi 166.50 111.0014340-06 100m 3/8 0.250" 120psi 360psi 267.00 178.0014340-08 100m 1/2 0.375" 120psi 360psi 402.00 268.00
14340-50-10** 50m 5/8 0.500" 120psi 360psi 220.50 147.00
Order Code Reel LengthNOM OD
NOM IDWorking Pressure
Burst Pressure
RRP Per Coil
List Per Coil
14340-M04 100m 4mm 2.5mm 840kPa 2520kPa 79.50 53.0014340-M06 100m 6mm 4.0mm 840kPa 2520kPa 112.50 75.0014340-M08 100m 8mm 6.0mm 840kPa 2520kPa 174.00 116.0014340-M10 100m 10mm 7.5mm 840kPa 2520kPa 306.00 204.0014340-M12 100m 12mm 8.6mm 840kPa 2520kPa 391.50 261.00
** Black and Natural Only.
All prices excluding GSTPage 188
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Custom Made Products
Custom Extrusion
Wire Covering
Any combination of tubing can be bundled & covered with nylon, low density polyethylene or PVC.
Bundles can be covered in either a flat or round configuration.
Bundle Tube
Any combination of wire can be bundled & covered with nylon, low density polyethylene or PVC.
Bundles can be covered in either a flat or round configuration.
Capabilities and ServicesReliance Worldwide have state of the art extrusion capabilities located in Melbourne, Australia, with continuous inline measuring of diameterandwallthickness.Thisresultsintubeandrodofverytighttolerancesthatcanbepackagedinlong,continuouslengths.
Tubesandpipescanbemanufacturedinarangeofdiameters,wallthickness,materialtypes,colours,customprinting,andtubebundle configurations. We have material grades that are suitable for food contact applications and can customise products to suit your specific needs.
Wehavevariouspackagingoptionsavailabletoyou.Tubeandrodproductscanbepackagedaslengths,coils,ontocardboard,timber, or steel reels. Continuous lengths of over 15,000m are possible depending on the tube or rod size.
We have the following capabilities and services:
• Tubeandrodsizerangefrom3.0mmto40mm
• Maintain extremely tight dimensional tolerances
• In house design and manufacture of extrusion tooling to accommodate any size tube and rod
• Tubebundlesinawiderangeofconfigurations
• Cable bundles in a wide range of configurations
• Various jacket material options for bundle products
• Theadditionofcatenarywiresforbundleproductsupport
• Custom colours
• Custom printing
• Basic profile extrusion
• Continuous long lengths on reels
• Short lead times for product design, trails and supply of finished product
Reliance Worldwide has extensive experience extruding most polymers including, but not limited to the following materials:
• Low density polyethylene (LDPE)
• Medium density polyethylene (MDPE)
• High density polyethylene (HDPE)
• Semi rigid nylon
• Cross linked polyethylene (PEX)
• Polypropylene (PP)
• ABS
• Fire resistant anti static (FRAS)
• PVC
• Custom compounds tailored to meet your requirements
• Materials suitable for food contact applications
Talktousaboutyourcustomextrusionrequirementsandwewilltailorasolutionforyoutomeetanyphysicalpropertiesandperformance requirement. Proudly Australian made.
All prices excluding GST Page 189
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Jubilee Worm Drive Hose Clamps
Hose Clamps Zinc Plated Mild Steel
Order Code Size mm Size Inches Inner Pack Qty Outer Pack Qty RRP List
Price
295-012 OOO 9.5–12 3/8–1/2 10 100 1.47 0.98295-016 MOO 11 – 16 1/2–5/8 10 100 1.47 0.98295-020 OO 13 – 20 1/2–3/4 10 100 1.51 1.01295-022 O 16 – 22 5/8–7/8 10 100 1.79 1.19295-025 OX 18–25 3/4–1 10 100 1.79 1.19295-030 1A 22 – 30 7/8–11/8 10 100 1.90 1.27295-035 1 25 – 35 1–13/8 10 100 1.99 1.33295-040 1X 30 – 40 11/8–15/8 10 100 2.05 1.37295-050 2A 35 – 50 11/4–17/8 10 100 2.27 1.51295-055 2 40 – 55 11/2–21/8 10 100 2.32 1.55295-060 2X 45 – 60 13/4–23/8 10 100 2.44 1.63295-070 3 55 – 70 2–23/4 10 50 2.55 1.70295-080 3X 60–80 23/8–31/8 Loose in outers 150 2.87 1.92295-090 4 70–90 23/4–31/2 Loose in outers 125 3.03 2.02295-100 4X 85–100 31/4–4 Loose in outers 100 3.29 2.19295-120 5 90–120 33/4–41/2 Loose in outers 100 3.68 2.45295-140 6 110 – 140 41/4–51/2 Loose in outers 75 4.00 2.67295-165 7 135 – 165 5–53/4 Loose in outers 50 4.33 2.88295-190 71/2 158–190 51/4–61/2 Loose in outers 50 5.19 3.46
Hose Clamps 304 Stainless Steel
Jubilee Multiband
Order Code Size mm Size Inches Outer Pack Qty Outer
Pack Qty RRP List Price
296-012 OOO 9.5–12 3/8–1/2 10 100 4.91 3.28296-016 MOO 11 – 16 1/2–5/8 10 100 4.96 3.31296-020 OO 13 – 20 1/2–3/4 10 100 4.96 3.31296-022 O 16 – 22 5/8–7/8 10 100 6.06 4.04296-025 OX 18–25 3/4–1 10 100 6.20 4.13296-030 1A 22 – 30 7/8–11/8 10 100 6.69 4.46296-035 1 25 – 35 1–13/8 10 100 6.88 4.58296-040 1X 30 – 40 11/8–15/8 10 100 7.03 4.69296-050 2A 35 – 50 11/4–17/8 10 100 7.91 5.27296-055 2 40 – 55 11/2–21/8 10 100 8.25 5.50296-060 2X 45 – 60 13/4–23/8 10 100 8.65 5.77296-070 3 55 – 70 2–23/4 10 50 9.19 6.13296-080 3X 60–80 23/8–31/8 Loose in outers 150 9.83 6.55296-090 4 70–90 23/4–31/2 Loose in outers 125 10.23 6.82296-100 4X 85–100 31/4–4 Loose in outers 100 10.68 7.12296-120 5 90–120 33/4–41/2 Loose in outers 100 11.79 7.86296-140 6 110 – 140 41/4–51/2 Loose in outers 75 12.89 8.59296-165 7 135 – 165 5–53/4 Loose in outers 50 14.17 9.45
Order Code Material Band Width
Band Length
Housing Screws RRP List
Price
297-300 Zinc Plated Mild Steel 11mm 10m 25 43.95 29.30297-300SS 304 Stainless Steel 11mm 10m 25 94.32 62.88
All prices excluding GSTPage 190
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Tools
Merchandiser Range
Annealed Copper Tube
Flaring Tools
Tube Cutters
O-Clip Pincers
Order Code Description Inner pack Qty RRP List Price
297-001 Jubilee Flexidriver - 31.64 21.09297-10 Handy Pack – Mild Steel Clamps 100 clips 164.96 109.97297-100 Clip Dispender – Mild Steel Clamps 100 clips plus stand 212.21 141.47297-100SS Clip Dispenser – Stainless Steel Clamps 100 clips plus stand 640.56 427.04
Order Code ISWG – mm OD Length Working
PressureBurst
PressureRRP Coil
List Per Coil
17222-02 22 swg – 0.71mm 1/8 30m 18700 93500 309.60 206.4017220-04 20swg–0.91mm 1/4 30m 12080 60400 576.00 384.0017220-05 20swg–0.91mm 5/16 30m 9380 46900 715.95 477.3017220-06 20swg–0.91mm 3/8 18m 7680 38400 507.60 338.4017220-08 20swg–0.91mm 1/2 18m 4170 20850 571.59 381.06
Order Code Tube Material Size mm Description RRP List Price
24019 Synthetic 3-19 Compact, spring loaded shear 25.94 17.29
24020 Synthetic 3–28 Heavy duty shear type 84.98 56.6524030 Metal 3-19 Required a 32mm swing radius 138.26 92.1724019-1 - 3-19 Replacementbladefor24019 10.87 7.24
Order CodeTube
MaterialDescription RRP List Price
24301 Copper 60˚Flaringtooldrivewedgetype 305.60 203.7324302 - Spring suit 24301 11.60 7.7424303 - 1/2"Pinsuit24301 39.40 26.2724304 - 3/4"Pinsuit24301 39.40 26.27
Order Code Description RRP List Price
111099 Side closing pincers 153.88 102.59
All prices excluding GST Page 191
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Oetiker O-Clips
Order Code Size mm Band width Max Pressure RRP List Price
1105-03 3 – 5 5.0mm 3000 0.68 0.451107-04 5 – 7 6.0mm 3000 0.77 0.521109-05 7–9 7.0mm 3000 0.82 0.551111-07 8–11 7.0mm 3000 0.91 0.611113-08 11 – 13 7.0mm 3000 0.88 0.591115-09 13 – 15 7.5mm 3000 0.96 0.641118-10 15–18 8.0mm 3000 1.16 0.771120-12 16 – 20 8.5mm 3000 1.30 0.871123-14 19–23 9.0mm 3000 1.93 1.291125-15 21 – 25 10.0mm 3000 1.93 1.291127-16 23 – 27 10.0mm 3000 1.93 1.291128-17 25–28 10.0mm 3000 2.87 1.921130-17 27 – 31 10.0mm 3000 3.37 2.251134-21 30 – 34 10.0mm 3000 3.68 2.451137-23 32 – 37 10.0mm 3000 3.96 2.641140-25 35 – 40 10.0mm 3000 4.14 2.76
Order Code Size mm Band width Max Pressure RRP List Price
1107-04SS 5 – 7 6.0mm 3000 2.35 1.571109-05SS 7–9 7.0mm 3000 2.41 1.611111-07SS 8–11 7.0mm 3000 2.27 1.511113-08SS 11 – 13 7.0mm 3000 2.60 1.731115-09SS 13 – 15 7.5mm 3000 2.66 1.771118-10SS 15–18 8.0mm 3000 3.79 2.521120-12SS 16 – 20 8.5mm 3000 4.28 2.851123-14SS 19–23 9.0mm 3000 5.89 3.921125-15SS 21 – 25 10.0mm 3000 6.32 4.211127-16SS 23 – 27 10.0mm 3000 7.06 4.711128-17SS 25–28 10.0mm 3000 7.25 4.831130-17SS 27 – 31 10.0mm 3000 8.79 5.861134-21SS 30 – 34 10.0mm 3000 9.29 6.191137-23SS 32 – 37 10.0mm 3000 9.66 6.441140-25SS 35 – 40 10.0mm 3000 10.23 6.82
O-Clips 304 Stainless Steel
Single Sided Saddle
Order Code Size Band Width Band Thickness RRP List Price
11-CC03 3/16 12.7 0.50 1.38 0.9211-CC04 1/4 12.7 0.50 1.28 0.8511-CC05 5/16 12.7 0.50 2.75 1.8311-CC06 3/8 12.7 0.50 1.55 1.0311-CC08 1/2 14.0 0.80 2.22 1.4811-CC10 5/8 14.0 0.80 4.30 2.8611-CC12 3/4 20.0 0.91 4.42 2.9511-CC16 1 20.0 0.91 3.41 2.28
O Clips Zinc Plated Mild Steel
All prices excluding GSTPage 192
HO
SE
TU
BE
& A
CC
ES
SO
RIE
S
Retractable Hose Reels
Double Sided Saddle
Hose Reels
Order Code Size Band Width Band Thickness RRP List Price
11-CS04 1/4 12.7 0.71 0.46 0.3111-CS05 5/16 12.7 0.71 0.54 0.3611-CS06 3/8 12.7 0.71 0.60 0.4011-CS08 1/2 12.7 0.71 0.56 0.3711-CS10 5/8 12.7 0.71 0.68 0.4511-CS12 3/4 12.7 0.71 0.76 0.5011-CS16 1 12.7 0.71 1.61 1.07
Order Code Description Hose IDHose
LengthInlet
FemaleOutlet Male
Case Colour
RRP List Price
10-SEAIR10 Air 10mm 16mtrs 3/8BSP 3/8BSP Blue 405.52 270.34
10-SECW12 Cold Water 12mm 18mtrs 1/2BSP Nil Green 446.51 297.67
10-SEHW10 Hot Water 10mm 16mtrs 3/8BSP Nil Blue 539.21 359.47
10-SIAIR10 Air 10mm 20mtrs 3/8BSP 3/8BSP Blue 687.53 458.35
10-SIAIR12 Air 12mm 15mtrs 3/8BSP 3/8BSP Blue 602.36 401.58
10-SIOIL12 Oil – Low Pressure 12mm 10mtrs 1/2BSP 3/8BSP Blue 1249.91 833.27
All prices excluding GST
ME
RC
HA
ND
ISIN
G
Page 193
Clear Tip Out Bin System
Tip Out Bin Accessories
Point of Sale Merchandisers
Free Standing Slider System
Miscellaneous Packaged Products
Order Code Description DimensionsNumber of Bins
RRPList
Price
21-MS403 No 3 Cabinet & Bins 600mm (W) x 240mm (H) x 158mm (D) 3 137.54 91.69
21-MS206 No 6 Cabinet & Bins 600mm (W) x 113mm (H) x 74mm (D) 6 51.17 34.11
21-MS109 No 9 Cabinet & Bins 600mm (W) x 77mm (H) x 62mm (D) 9 49.84 33.23
Order Code Description Dimensions RRP List Price
21-MS600 Bin Frame 600 (H) 51.60 34.4021-MS601 Bin Frame 1200 (H) 76.97 51.3121-MS602 Bin Rail 600 (H) 47.56 31.7021-MS603 Bin Rail 1200 (H) 67.45 44.97
21-MS2 Bolts and Nuts 3.17 2.11
Order Code Description Dimensions RRP List Price
21-QS000 Four individual panels 450mm D x 1200mm W x 1995mm H 3033.48 2022.32
This system features four individual panels that can be filled with tip out bins. Two are fixed to the back side of the system, and two slide in front easily, from left to right. Allowing access to all four panels. Bins not included.
Order Code Description RRP List Price
068-91000 Tyre Inflator 160psi / 1100kPa 156.35 104.24
068-9130 Tyre Inflator Dual Hold-On Chuck 0-1100kPa Dial Gauge Deflate Control
100.89 67.26
07-FR802 Filter / Regulator Combination 1/4 BSP 119.30 79.54061-7815 1/2 Brass Hose Connection 9.78 6.52061-7813 1 x 3/4 Brass Tap Fitting 11.90 7.93061-4060 Trigger Type Brass Water Set 1/2 Hose 49.29 32.86061-8434 Brass Hose Set 3/4 Hose 49.50 33.00
Beige ABS Plastic Cabinet. Transparent hinged tubs.• Bins stack or hang• Clear easy view compartments• Dust free storage
068-91000
07-FR802068-9130 061-7815
061-7813061-4060 061-8434
All prices excluding GSTPage 194
TE
CH
NIC
AL
Tube & Thread Profile Chart
0
THREAD SIGHT GUAGE(Suitable for BSP and NPT) ce
ntim
etre
s
inches
(Suitable for ID and OD)
BSP 28TPINPT 27TPI
BSP 19TPINPT 18TPI
BSP 19TPINPT 18TPI
BSP 14TPINPT 14TPI
BSP 14TPINPT 14TPI
BSP 11TPINPT 11 1/2TPI
TUBING SIGHT GUAGE
0
1
21/8”
3/16”
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
1”
4mm
6mm
8mm
10mm
12mm
16mm
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1 1/8”
1/4”
3/8”
1/2”
3/4”
1”
2
3
4
5
6
7
8
9
10
All prices excluding GST Page 195
TE
CH
NIC
AL
The following tables have been prepared to show information relating to the thread form of both ends of a tube connection fitting - tube end and pipe end.
A ‘Pipe Thread’ is a ‘universal’ thread that enables port connection via a common thread form. With the addition of a tube connection fitting, pipe threads can be used to connect tube to the port of a piece of equipment or allow adaptation, both sizing and/or configuration, to satisfy a given situation. However, depending upon the place of manufacture or the industry in which you are working, different ‘universal’ pipe threads may be specified.
In Australia, most specifications will demand either BSP (British Standard Pipe - Taper or Parallel) or NPT/NPS (American Pipe (Taper/Straight). The fundamental difference with these two ‘universal’ threads is the pitch or threads per inch (T.P.I.) and the thread angle.
Pipe thread sizes are determined by the ‘nominal bore’ of pipe and, as such, can be very confusing when ordered. Confusion is often encountered because the wall thickness of the pipe is not included in the calculation for BSPT, BSPP, NPT or NPS thread specifications. The easiest way to determine the size you require is to use the ‘Tube and Thread Profile’ drawings on page 3.
Commonly termed BSPT, gas thread, sealing thread, dry seal thread or engineering thread, AS IS0 7.1/2 (previously AS 1722.1) require mating threads, including a combination of parallel and tapered sealing ends, to effect a seal without the aid of any form of thread sealant or gasket. Generally longer and more bulky than the AS1722.2 equivalents, pipe threads manufactured to meet AS IS0 7.1/2 (previously AS 1722.1) have a limited working life if continually disassembled and re-made.
Thread Information
Threads At A Glance
Pipe Threads
AS IS0 7.1/2 (previously AS 1722.1) Sealing Threads of Whitworth Form (R Series)
Table 1. Pipe Threads
Commonly termed BSP, M.I., F.I or plumbing thread, the thread will require a sealing aid to effect a positive seal. The sealing agent may take the form of a gasket, o-ring, thread tape, hemp or thread paste. Threads manufactured to AS1722.2 are used extensively in the Plumbing Industry. If used in the correct manner, threads manufactured to AS1722.2 can be disassembled and re-made many times over.
AS1722.2 Fastening Threads of Whitworth Form (G Series)
Nom. Size
British Pipe ThreadBSP (G Series)
American Pipe ThreadNPS - National Pipe Straight NPT - National Pipe Taper
Threads BSP BSP Threads NPS NPT
T.P.I. Angle O.D. (mm) Min. Dia. (mm)
Max. Dia. (mm) T.P.I Angle O.D. (mm) Min. Dia.
(mm)Max. Dia.
(mm)
1/8 28 55 9.62 9.51 9.73 27 60 10.29 10.27 10.291/4 19 55 13.03 12.91 13.16 18 60 13.77 13.69 13.773/8 19 55 16.54 16.41 16.66 18 60 17.15 17.07 17.151/2 14 55 20.82 20.67 20.96 14 60 21.34 21.26 21.343/4 14 55 26.30 26.16 26.44 14 60 26.67 26.59 26.671” 11 55 33.07 32.89 33.25 11.5 60 33.40 33.31 33.40
1 1/4 11 55 41.73 41.55 41.91 11.5 60 42.16 42.07 42.161 1/2 11 55 47.62 47.44 47.80 11.5 60 48.26 48.17 48.26
2” 11 55 59.44 59.25 59.62 11.5 60 60.33 60.24 60.33
All prices excluding GSTPage 196
TE
CH
NIC
AL
A ‘tube thread’ is a generic term used for identifying the thread form, of the tube end, of a tube connection fitting and not a specific thread.
Thread Information
Threads At a Glance
Table 2. Tube Threads
Tube O.D Standard Compression Internal Compression SAE 45˚ Flare SAE 45˚ Inverted Flare
1/8 5/16 x 24UNF 9/32 x 26BRASS 5/16 x 24UNF 5/16 x 28UNS3/16 3/8 x 24UNF 3/8 x 24UNF 3/8 x 24UNF 3/8 x 24UNF1/4 7/16 x 24UNS 7/16 x 24UNS 7/16 x 20UNF 7/16 x 24UNS
5/16 1/2 x 24UNS 1/2 x 24UNS 1/2 x 20UNF 1/2 x 20UNF3/8 9/16 x 24UNEF 9/16 x 24UNEF 5/8 x 18UNF 5/8 x 18UNF1/2 11/16 x 20UN 3/4 x 24UNS 3/4 x 16UNF 3/4 x 18UNS5/8 n/a 7/8 x 20UNEF 7/8 x 14UNF n/a3/4 n/a 1.025 x 18UNS 11/16 x 14UNF n/a
4mm 5/16 x 24UNF n/a n/a n/a6mm 7/16 x 24UNS n/a n/a n/a8mm 1/2 x 24UNS n/a n/a n/a
10mm 9/16 x 24UNEF n/a n/a n/a12mm 11/16 x 20UN n/a n/a n/a
All prices excluding GST Page 197
TE
CH
NIC
AL
The thread types listed below are representative of some of the common threads and terms used in general industry.
Thread Information
Thread Abbreviations and Definitions
Thread Abbreviation Definition
ANP American National PipeANPT American National Pipe Taper
Brass Thread Fine thread common to brass machining and always 26TPI regardless of major diameter (whitworth form)BSP British Standard Pipe
BSPP British Standard Pipe ParallelBSPT British Standard Pipe Tapered
Dry Seal A generic term referring to a thread that seals without the aid of a thread sealant or washerEngineering Thread A term referring to a thread capable of sealing without the aid of a thread sealant or washer
F.I. Female Iron (BSP Female - common in the Plumbing Industry)GAS A term referring to BSPT or NPT thread (common in Automotive and Plumbing Industry)J.I.C. Joint Industries Conference or J.I. CaseM.I. Male Iron (BSP Male - common in the Plumbing Industry)NPS National Pipe Straight (American pipe thread)NPT National Pipe Taper (American pipe thread)
NPTF National Pipe Taper Fuel (Internal, straight, American pipe thread)TPI Threads per inch
Pipe Thread A term referring to BSPT/BSPP or NPT/NPS threadPlumbing Thread A term referring to a BSP fastening thread
P.T. Sealing, tapered, pipe thread of whitworth formSAE Society of Automotive Engineers
Sealing Thread A term referring to a thread capable of sealing without the aid of a thread sealant or washerTube Thread Thread used on the tube end of a tube connection fitting
UN Unified National (not standard UNF)UNEF Unified National Extra FineUNF Unified National Fine (formally SAE)UNS Unified National Special (not standard UNF)
All prices excluding GSTPage 198
TE
CH
NIC
AL
All working pressures are calculated at an ambient temperature using a safety factor of 4:1. Generally, working pressure is dependent upon the type of tubing used and not the fitting. Consequently the tables shown below should be used as a guide only.
Tube Connection Fittings
Maximum Working Pressure Tables for Tube Connection Fittings (kPa)
Hydraulic Applications Only
Pneumatic Applications
Pipe End Pressure Ratings - Maximum Working Pressure (kPa)
Tube O.D Standard Compression
Internal Compression SAE 45˚ Flare SAE 45˚ Inverted
Flare Fleetfit Air Brake Pneufit
1/8 3500 3500 17250 17250 n/r n/r3/16 3500 3500 17250 17250 n/r n/r1/4 2750 2750 13750 13750 n/r n/r
5/16 2750 2750 13750 13750 n/r n/r3/8 2000 2000 10400 10400 n/r n/r1/2 2000 2000 7000 7000 n/r n/r5/8 n/a 1400 7000 n/a n/r n/r3/4 n/a 1400 7000 n/a n/r n/r
4mm 3500 n/a n/a n/a n/r n/r6mm 2750 n/a n/a n/a n/r n/r8mm 2750 n/a n/a n/a n/r n/r
10mm 2000 n/a n/a n/a n/r n/r12mm 2000 n/a n/a n/a n/r n/r
n/a = Not Availaible
n/a = Not Availaible n/r = Not Recommended for Hydraulic Applications
Tube O.D Standard Compression
Internal Compression SAE 45˚ Flare SAE 45˚ Inverted
Flare Fleetfit Air Brake Pneufit Brass
1/8 2000 2000 4800 4800 1050 18003/16 1750 1750 4800 4800 1050 18001/4 1400 1400 4800 4800 1050 1800
5/16 1400 1400 4800 4800 1050 18003/8 1050 1050 2750 2750 1050 18001/2 1050 1050 1750 1750 1050 18005/8 n/a 700 1750 n/a 1050 n/a3/4 n/a 700 1750 n/a 1050 n/a
4mm 2000 n/a n/a n/a 1050 18006mm 1400 n/a n/a n/a 1050 18008mm 1400 n/a n/a n/a 1050 1800
10mm 1050 n/a n/a n/a 1050 180012mm 1050 n/a n/a n/a 1050 1800
Pipe Size
Brass Alloy
Hydraulic Pneumatic
1/8 13750 35001/4 13750 35003/8 13750 27501/2 10400 27503/4 7000 20001” 4000 1250
All prices excluding GST Page 199
TE
CH
NIC
AL
Calculated, maximum working pressure (kPa) for temperatures between 6.7° and 37.8°C. Burst pressure of copper tube is 5 times that of the working pressure.
Maximum Working Pressure Tables - Copper Tubes
Copper Annealed Seamless ASTM B-75 or Equivalent
Tube Wall Thickness
Tubing O.D.0.71mmISWG
22
0.91mmISWG
20
1.22mmISWG
18
1.63mmISWG
16
2.03mmISWG
14
1/8 18700 23700 - - -3/16 11920 15300 22150 - -1/4 8780 12080 16200 22000 -5/16 6870 9380 12600 17300 -3/8 5650 7680 10200 14000 185001/2 4170 5630 7450 10100 134505/8 - 4440 6090 7980 104003/4 - 3670 4850 6540 85401” - 2720 3700 5070 6260
All prices excluding GSTPage 200
TE
CH
NIC
AL
● Copper
● 385 Brass Alloy
● 352 DR Brass Alloy
Corrosion Rating Charts
Tube Connection Fittings
Alloy Group Definitions
Corrosion Rating ChartsThe accompanying charts give relative corrosion resistance ratings for copper and the commonly used copper alloys. These ratings are based on consideration of laboratory test data, service experience and a general knowledge of corrosion resistant properties; however, it must be fully recognised that the ratings are relative only and definite unqualified recommendations of corrosion resistance cannot be made.
When interpreting the data, it should be remembered that corrosion resistance or rate of corrosion is greatly affected by conditions of exposure such as presence of oxidising agents, velocity of solution, aeration, temperature and similar factors.
In general, the information in the tables refers to non-oxidising conditions, low velocities (below 1.2 metres per second) and ambient temperatures.
All prices excluding GST Page 201
TE
CH
NIC
AL
Corrosion Rating Charts
Corrosion Media Copper385 Brass
Alloy352 DR Brass
Alloy
Acetic Acid G N FAcetic Anhydride G N F
Acetone E E EAcetylene N E NAlcohols E E E
Alum G N GAlumina G E E
Aluminium Chloride E N FAluminium Hydroxide G E E
Aluminium Sulfate E N GAmmonia, Absolutely dry N E E
Ammonia, moist N N NAmmonium Hydroxide N N NAmmonium Chloride N N NAmmonium Nitrate F N NAmmonium Sulfate E N N
Amyl Acetate E G EAmyl Alcohol F E E
Aniline F F FAniline Dyes E F F
Asphalt E E EAtmosphere, Industrial E G EAtmosphere, Marine E G EAtmosphere, Rural E E EBarium Carbonate G E EBarium Chloride E N F
Barium Hydroxide E G EBarium Sulfate F E EBarium Sulfide E G G
Beer E G EBeet Sugar Syrups E G E
Benzine E E EBenzoic Acid E G E
Benzol E E EBlack Liquor, Sulfate Processed F N N
Bleaching Powder, Wet G N GBorax E E E
Bordeaux Mixture E G EBoric Acid E G E
Brines G N GBromine, Dry E E E
Bromine, Moist G N FButane E E E
Butyl Alcohol E E EButyric Acid G F G
Calcium Bisulfite G N GCalcium Chloride G N G
Corrosion Media Copper385 Brass
Alloy352 DR Brass
Alloy
Calcium Hydroxide E G ECalcium Hypochlorite G N GCane Sugar Syrups E G E
Carbolic Acid G G GCalcium Dioxide, Dry E E E
Carbon Dioxide, Moist G F GCarbonated Water G F G
Carbonated Beverages G F GCarbon Disulfide G E E
Carbon Tetrachloride, Dry E E ECarbon Tetrachloride, Moist G N G
Castor Oil E E EChlorine, Dry E E E
Chlorine, Moist F N FChloracetic Acid G N FChloroform, Dry E E EChromic Acid N N N
Cider E F ECitric Acid E F E
Coffee E E ECopper Chloride F N FCopper Nitrate F N FCopper Sulfate G vN G
Corn Oil E G ECottonseed Oil E G E
Creosote E G ECrude Oil G F G
Ethers E E EEthyl Acetate E G EEthyl Alcohol E E EEthyl Chloride G F G
Ethylene Glycol E G EFerric Chloride N N NFerric Sulfate N N N
Ferrous Chloride G N GFerrous Sulfate G N GFormaldehyde E G E
Formic Acid G N FFreon E E E
Fruit Juices G N FFuel Oil E F EFurfural E G E
Gasoline E E EGelatine E E EGlucose E E E
Glue E G E
Corrosion Rating Definition
E. (Excellent) The metal should be suitable under most conditions of use.
G. (Good)The metal offers good corrosion resistance. It may be considered in place of a metal with an “E” rating when some property other than corrosion resistance governs its use.
F. (Fair) The metal offers fair corrosion resistance. N. (Not to be used) The metal is not suitable.
All prices excluding GSTPage 202
TE
CH
NIC
AL
Corrosion Rating Charts
Corrosion Media Copper385 Brass
Alloy352 DR Brass
Alloy
Glycerine E E EHydrobromic Acid F N F
Hydrocarbons, Pure E E EHydrochloric Acid F N FHydrocyanic Acid N N NHydrofluoric Acid F N N
Hydrofluosilicic Acid G N GHydrogen E E E
Hydrogen Peroxide G F GHydrogen Sulfide, Dry E E E
Hydrogen Sulfide, Moist N F GKerosene E E ELacquers E E E
Lacquer Solvents E E ELactic Acid G N F
Lime E E ELime-Sulfur F G GLinseed Oil G G G
Magnesium Chloride G N FMagnesium Hydroxide E E E
Magnesium Sulfate E F EMercury N N N
Mercury Salts N N NMethyl Alcohol E E E
Methyl Chloride, Dry E E EMilk E G E
Mine Water F N FNatural Gas G E ENitric Acid N N NNitrogen E E E
Oleic Acid G F GOxalic Acid G N F
Oxygen E E EPalmitic Acid G F G
Paraffin E E EPhosphoric Acid G N F
Potassium Carbonate E G EPotassium Chloride G N G
Potassium Chromate E E EPotassium Cyanide N N M
Potassium Dichromate Acid N N MPotassium Hydroxide G F G
Potassium Sulfate E G EPropane E E E
Rosin E E ESea Water G F ESewage E F E
Corrosion Media Copper385 Brass
Alloy352 DR Brass
Alloy
Silver Salts N N NSoap Solutions E G E
Sodium Bicarbonate G F GSodium Bisulfate G N G
Sodium Carbonate E G ESodium Chloride G N G
Sodium Chromate E E ESodium Cyanide N N N
Sodium Dichromate, Acid N N NSodium Hydroxide G F G
Sodium Hypochlorite F N FSodium Nitrate G F G
Sodium Peroxide F N FSodium Phosphate E G E
Sodium Sillicate E G ESodium Sulfate E G ESodium Sulfide F G GSodium Sulfite G N G
Sodium Thiosulfate F G GSteam E F E
Stearic Acid G F GSugar Solutions E G E
Sulfur, Dry G E ESulfur, Molten N N N
Sulfur Chloride, Dry E E ESulfur Dioxide, Dry E E E
Sulfur Dioxide, Moist G N GSulfur Trioxide, Dry E E E
Sulfuric Acid G N FSulfurous Acid G N G
Tannic Acid E G ETar E G E
Tartaric Acid E F EToluene E E E
Trichloracetic Acid G N FTrichlorethylene, Dry E E E
Trichlorethylene, Moist G F GTurpentine E G E
Varnish E E EVinegar G N F
Water, Potable E N EZinc Chloride F N FZinc Sulfate G N G
All prices excluding GST Page 203
TE
CH
NIC
AL
Conversion Tables
Standard Conversions
psi kPa kPa psi
1 6.9 1 0.152 13.8 2 0.293 20.7 3 0.444 27.6 4 0.585 34.5 5 0.736 41.4 6 0.877 48.3 7 1.028 55.2 8 1.169 62.1 9 1.31
10 69.0 10 1.4550 345 50 7
100 690 100 15250 1724 250 36500 3448 500 73
1000 6895 1000 1455000 34475 5000 725
10000 68950 10000 145020000 137900 20000 290150000 344750 50000 725275000 517125 75000 10877
100000 689500 100000 14503
lbs/in² kg/cm² kPa Bar
lbs/in² 1 0.07031 6.895 0.0689kg/cm² 14.22 1 98.05 0.981
kPa 0.1451 0.0102 1 0.01Bar 14.51 1.02 100 1
Metric Imperial Imperial Metric
1mm 0.0393 inch 1/8 inch 3.17mm1cm 0.3937 inch 1 inch 25.40mm
10cm 0.3281 foot 1 foot 30.48cm1m 1.0936 yard 1 yard 0.914m1km 0.6214 mile 1 mile 1.61km
Inches Inchesmm
Inches InchesmmFraction Decimal Fraction Decimal
1/64 0.016 0.397 33/64 0.516 13.0971/32 0.031 0.794 17/32 0.531 13.4943/64 0.047 1.191 35/64 0.547 13.8911/16 0.063 1.588 9/16 0.563 14.2885/64 0.078 1.984 37/64 0.578 14.6843/32 0.094 2.381 19/32 0.594 15.0817/64 0.109 2.778 39/64 0.609 15.4781/8 0.125 3.175 5/8 0.625 15.8759/64 0.141 3.572 41/64 0.641 16.2725/32 0.156 3.969 21/32 0.656 16.66911/64 0.172 4.366 43/64 0.672 17.0663/16 0.188 4.763 11/16 0.688 17.46313/64 0.203 5.159 45/64 0.703 17.8597/32 0.219 5.556 23/32 0.719 18.25615/64 0.234 5.953 47/64 0.734 18.6531/4 0.250 6.350 3/4 0.750 19.050
17/64 0.266 6.747 49/64 0.766 19.4479/32 0.281 7.144 25/32 0.781 19.84419/64 0.297 7.541 51/64 0.797 20.2415/16 0.313 7.938 13/16 0.813 20.63821/64 0.328 8.334 53/64 0.828 21.03411/32 0.344 8.731 27/32 0.844 21.43123/64 0.359 9.128 55/64 0.859 21.8283/8 0.375 9.525 7/8 0.875 22.225
25/64 0.391 9.922 57/64 0.891 22.62213/32 0.406 10.319 29/32 0.906 23.01927/64 0.422 10.716 59/64 0.922 23.4167/16 0.438 11.113 15/16 0.938 23.81329/64 0.453 11.509 61/64 0.953 24.20915/32 0.469 11.906 31/32 0.969 24.60631/64 0.484 12.303 63/64 0.984 25.0031/2 0.500 12.700 1” 1.000 25.400
Fahrenheit Celsius
0 -17.85 -15.010 -12.232 0.050 10.075 23.9100 37.8150 65.6200 93.3212 100.0
Pressure Imperial to Metric
Pressure
Length / Distance
Temperature
All prices excluding GSTPage 204
TE
CH
NIC
AL
Conversion Factors
From To Multiply by
Mass
ounce (oz) gram (g) 28.349gram (g) ounce (oz) 0.035pound (lb) kilogram (kg) 0.454kilogram (kg) pound (lb) 2.205ton tonne 1.016tonne ton 0.984
Density
pound / cubic inch (lb/in³) gram / cubic centimetre (g/cm³) 27.679gram / cubic centimetre (g/cm³) pound / cubic inch (lb/in³) 0.036pound / cubic foot (lb/ft³) kilogram / cubic metre (kg/m³) 16.018kilogram / cubic metre (kg/m³) pound / cubic foot (lb/ft³) 0.062pound / cubic yard (lb/yd³) kilogram / cubic metre (kg/m³) 0.593kilogram / cubic metre (kg/m³) pound / cubic yard (lb/yd³) 1.684
Pressure
pound / foot (lb/ft) kilogram / metre (kg/m) 1.4882kilogram / metre (kg/m) pound / foot (lb/ft) 0.672pound / square inch (lb/in²) kilogram / square centimetre (kg/cm²) 0.07031kilogram / square centimetre (kg/cm²) pound / square inch (lb/in²) 14.22pound / square inch (lb/in²) kilopascal (kPa) 6.895kilopascal (kPa) pound / square inch (lb/in²) 0.145pound / square inch (lb/in²) megapascal (MPa) 0.006895megapascal (MPa) pound / square inch (lb/in²) 145.04ton / square inch (ton/in²) megapascal (MPa) 15.444megapascal (MPa) ton / square inch (ton/in²) 0.0647bar kilogram / square centimetre (kg/cm²) 1.02kilogram / square centimetre (kg/cm²) bar 0.981bar pound / square inch (lb/in²) 14.51pound / square inch (lb/in²) bar 0.0689bar kilopascal (kPa) 100kilopascal (kPa) bar 0.01
Temperature
centigrade (C) fahrenheit (F) (C x 1.8) + 32fahrenheit (F) centigrade (C) (F - 32) / 1.8
Length
thou. inch (µin) millimetre (mm) 0.0254millimetre (mm) thou. inch (µin) 0.0393inch (in) centimetre (cm) 2.54centimetre (cm) inch (in) 0.3937foot (ft) metre (m) 0.3048metre (m) foot (ft) 3.2808mile kilometre (km) 0.6213kilometre (km) mile 1.6093
Volume
cubic inches (ci) cubic centimetres (cc) 16.3871cubic centimetres (cc) cubic inches (ci) 0.061cubic foot / min (cfm) litre / min (l/min) 28.3168litre / min (l/min) cubic foot / min (cfm) 0.0353cubic yard (yd³) cubic metre (m³) 0.7645cubic metre (m³) cubic yard (yd³) 1.3079fluid ounce (fl oz) ml (cm³) 28.4131ml (cm³) fluid ounce (fl oz) 0.035pint litre (dm3) 0.5682litre (dm3) pint 1.7605imperial gallon litre (dm3) 4.5506litre (dm3) imperial gallon 0.2197
All prices excluding GST Page 205
TE
CH
NIC
AL
Notes
Trade Price List – 2019
27-28 Chapman Place, Eagle Farm, QLD 4009, Australia
1800 777 299 1800 065 321 www.TubeFit.com.au
TubeFit is a division of Reliance Worldwide Corporation (Aust) Pty. Ltd. ABN 71 004 784 301