tp 65-180/2-a-f-z-bube 400y 50hz - lenntech€¦ · printed from grundfos product centre...
TRANSCRIPT
GRUNDFOS DATA BOOKLET
TP 65-180/2-A-F-Z-BUBE 400Y 50HZ Grundfos Pump 96402337
Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/TPB00/96402337/TP-65-180-2-B-A-F-Z-BUBE.html
[email protected]. +31-15-261.09.00fax. +31-15-261.62.89
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. Description1 TP 65-180/2 B A-F-Z-BUBE
Note! Product picture may differ from actual product
Product No.: 96402337
Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.
Further product detailsThe bronze pump housing and stainless-steel impeller make the pump suitable for circulation of hotwater.
The product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.
PumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.
1: Pump housing2: Impeller3: Shaft4: Coupling5: Pump head
The pump housing is provided with a replaceable stainles steel/PTFE neck ring to reduce the amount ofliquid running from the discharge side of the impeller to the suction side. The impeller is secured with asplit cone with nut.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
- Rotating seal ring material: Tungsten carbide (WC)- Stationary seat material: Carbon graphite, resin-impregnated
Printed from Grundfos Product Centre [2018.02.043]
This is a widely used material pairing. If the pumped liquid contains particles, wear on the seal faces must beexpected. Due to the favourable lubricating properties of carbon graphite, the seal is suitable for use even underpoor lubricating conditions, such as hot water. However, under such conditions, wear on the carbon graphite facereduces seal life.
Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
A circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.The flanges have tappings for mounting of pressure gauges.
The motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.Motor and pump shaft are connected via a rigid two-part coupling.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14, IM V 18 (Code I) / IM 3601, IM3611 (Code II).
The motor efficiency is classified as IE3 in accordance with IEC 60034-30.The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).
The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 140 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Speed for pump data: 2830 rpmRated flow: 29 m³/hRated head: 11.4 mPrimary shaft seal: BUBECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Bronze
DIN W.-Nr. 2.1050ASTM B505-C90700
Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304
Installation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 65Pressure rating: PN 6/10Port-to-port length: 340 mmFlange size for motor: FT115
Printed from Grundfos Product Centre [2018.02.043]
Position Qty. DescriptionElectrical data:Motor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 5,45/3,15 AStarting current: 850-930 %Cos phi - power factor: 0,87-0,82Rated speed: 2890-2910 rpmEfficiency: IE3 84,2%Motor efficiency at full load: 84.2 %Motor efficiency at 3/4 load: 84.5 %Motor efficiency at 1/2 load: 83.1 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 47.8 kgGross weight: 50.6 kgShipping volume: 0.07 m³
Printed from Grundfos Product Centre [2018.02.043]
96402337 TP 65-180/2 B 50 HzH
[m]
0
2
4
6
8
10
12
14
Q [m³/h]0 5 10 15 20 25 30 35 40 45
eta[%]
0
20
40
60
80
100
TP 65-180/2 B, 3*400 V, 50Hz
P[kW]
0.0
0.5
1.0
1.5
2.0
NPSH[m]
0
2
4
6
8
P1
P2
Printed from Grundfos Product Centre [2018.02.043]
H[m]
0
2
4
6
8
10
12
14
Q [m³/h]0 5 10 15 20 25 30 35 40
eta[%]
0
20
40
60
80
100
TP 65-180/2 B, 3*400 V, 50Hz
P[kW]
0.0
0.5
1.0
1.5
2.0
NPSH[m]
0
2
4
6
8P1
P2
8215
4
507
34065
M12
RP 1/4
110139 139
178
120
170
100 100
L1 L2 L3
L3L2L1
LOW VOLTAGEDIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
Description ValueGeneral information:Product name: TP 65-180/2 B A-F-Z-BUBEProduct No: 96402337EAN number: 5700390666132Technical:Speed for pump data: 2830 rpmRated flow: 29 m³/hRated head: 11.4 mHead max: 180 dmPrimary shaft seal: BUBECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Bronze
DIN W.-Nr. 2.1050ASTM B505-C90700
Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304
Material code: ZInstallation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 10 barFlange standard: DINConnect code: FPipe connection: DN 65Pressure rating: PN 6/10Port-to-port length: 340 mmFlange size for motor: FT115Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 140 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 5,45/3,15 AStarting current: 850-930 %Cos phi - power factor: 0,87-0,82Rated speed: 2890-2910 rpmEfficiency: IE3 84,2%Motor efficiency at full load: 84.2 %Motor efficiency at 3/4 load: 84.5 %Motor efficiency at 1/2 load: 83.1 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 85U05906Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 47.8 kgGross weight: 50.6 kgShipping volume: 0.07 m³
34065
M12
RP 1/4
110
139139
178
170
100100
Printed from Grundfos Product Centre [2018.02.043]
96402337 TP 65-180/2 B 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0
I[A]
0.0
1.0
2.0
3.0
4.0
TP65-180/2B + 90SB 1.5 kW 3*400 V, 50 Hz
eta
cos phi
I
n[rpm]
2000
2200
2400
2600
2800
P1[kW]
0.0
1.0
2.0
3.0
4.0
n
P1
Printed from Grundfos Product Centre [2018.02.043]
96402337 TP 65-180/2 B 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
8215
4
507
34065
M12
RP 1/4
110139 139
178
120
170
100 100
Printed from Grundfos Product Centre [2018.02.043]
96402337 TP 65-180/2 B 50 Hz
Note! All units are in [mm] unless others are stated.
L1 L2 L3
L3L2L1
LOW VOLTAGEDIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]. +31-15-261.09.00fax. +31-15-261.62.89