touch music artwork guide 2016 - mint copies€¦ · digipak specifications 285 mm back cover...
TRANSCRIPT
ARTWORK GUIDE
Disc artwork is the copyright of Northern Uproar. © 2015.
CARD WALLET SPECIFICATIONS No text area Bleed FoldTrim
Back Front
124 mm
3 mm 3 mm
3 mm
3 mm
124 mm 124 mm
• When designing avoid placing text too close to the edge of the artwork. This is to prevent such details from being cropped when artwork is guillotined.
• Artwork must 'bleed' beyond the edges of your design to help facilitate the guillotining process.
• Insert/inlay artwork should be supplied in PSD, PDF, EPS, JPG or INDD formats (preferably unflattened) at a minimum of 300 dpi, colour mode CMYK.
• Any fonts used should be provided along with the artwork. Alternatively, type can be 'converted to outlines' prior to the document being supplied.
ARTWORK GUIDE
JEWEL CASE SPECIFICATIONSCD Inlay Front
No text area Bleed FoldTrim
ARTWORK GUIDE
119.5 mm
120.5 mm120.5 mm
CD InlayFront
• When designing avoid placing text too close to the edge of the artwork. This is to prevent such details from being cropped when artwork is guillotined.
• Artwork must 'bleed' beyond the edges of your design to help facilitate the guillotining process.
• Insert/inlay artwork should be supplied in PSD, PDF, EPS, JPG or INDD formats (preferably unflattened) at a minimum of 300 dpi, colour mode CMYK.
• Any fonts used should be provided along with the artwork. Alternatively, type can be 'converted to outlines' prior to the document being supplied.
• Slimline CD cases are also available. The specifications for the front inlay are the same as the Jewel case.
JEWEL CASE SPECIFICATIONSCD Inlay Back
No text area Bleed FoldTrim
ARTWORK GUIDE
117.8 mm
138 mm
6.5 mm6.5 mm
CD Inlay Back
• When designing avoid placing text too close to the edge of the artwork. This is to prevent such details from being cropped when artwork is guillotined.
• Artwork must 'bleed' beyond the edges of your design to help facilitate the guillotining process.
• Insert/inlay artwork should be supplied in PSD, PDF, EPS, JPG or INDD formats (preferably unflattened) at a minimum of 300 dpi, colour mode CMYK.
• Any fonts used should be provided along with the artwork. Alternatively, type can be 'converted to outlines' prior to the document being supplied.
• Slimline CD cases are also available. The specifications for the front inlay are the same as the Jewel case.
CD FACE SPECIFICATIONS
ARTWORK GUIDE
• Compact Discs have a diameter of 120mm. The printable area is 118mm and the hole in the centre of the disc is 20mm in diameter.
• When producing disc-face designs you should allow for bleed of at least 3mm for both the inner and out diameters.
• Ideally artwork should cover the centre hole completely. However be aware that any details placed in this area will be removed during the printing process.
• Please remove all guides from your designs before providing us with the finished artwork.
• Disc artwork should be supplied in PSD, PDF, EPS, JPG or INDD formats (preferably unflattened) at a minimum of 300 dpi, colour mode RGB.
20 mm
Printable Area
118 mm
120 mm
Please note, if your CDs are being manufactured via the glass mastering process disc artwork shouldbe supplied in the CMYK colour model.
No text area Bleed FoldTrim
ARTWORK GUIDE
Folded InsertPLASTIC WALLET SPECIFICATIONS
119.5 mm
120.5 mm120.5 mm
FrontBack
• When designing avoid placing text too close to the edge of the artwork. This is to prevent such details from being cropped when artwork is guillotined.
• Artwork must 'bleed' beyond the edges of your design to help facilitate the guillotining process.
• Insert/inlay artwork should be supplied in PSD, PDF, EPS, JPG or INDD formats (preferably unflattened) at a minimum of 300 dpi, colour mode CMYK.
• Any fonts used should be provided along with the artwork. Alternatively, type can be 'converted to outlines' prior to the document being supplied.
No text area Bleed FoldTrim
ARTWORK GUIDE
4-PanelDIGIPAK SPECIFICATIONS
285 mm
Back Cover139.5mm x 125.5mm
Front Cover139.5mm x 125.5mm
Inside Left138.5mm x 125.5mm
Inside Right138.5mm x 125.5mm
Spine 6m
m x 125.5m
m
251 mm
• When designing avoid placing text too close to the edge of the artwork. This is to prevent such details from being cropped when artwork is guillotined.
• Artwork must 'bleed' beyond the edges of your design to help facilitate the guillotining process.
• Artwork should be supplied in PSD, PDF, EPS, JPG or INDD formats (preferably unflattened) at a minimum of 300 dpi, colour mode CMYK.
• Any fonts used should be provided along with the artwork. Alternatively, type can be 'converted to outlines' prior to the document being supplied.
Please note: This is a guide, not a template. The artworkdisplayed is 50% smaller than an actual 4-Panel Digipak.
No text area Bleed FoldTrim
ARTWORK GUIDE
J-Card Inlay (3-Panel) & Cassette Label AUDIO CASSETTE SPECIFICATIONS
101.6 mm
103.2 mm
12.7 mm
Spine
25.4 mm
Flap
Cassette InlayFront
• J-Cards are available with up to 8 panels (foldout). Contact us for specifications.
• Avoid placing text too close to the edge of the artwork. This is to prevent such details from being cropped when artwork is guillotined.
• Artwork must 'bleed' beyond the edges of your design to help facilitate the guillotining process.
• Insert/inlay artwork should be supplied in PSD, PDF, EPS, JPG or INDD formats (preferably unflattened) at a minimum of 300 dpi, colour mode CMYK.
• Any fonts used should be provided along with the artwork. Alternatively, type can be 'converted to outlines' prior to the document being supplied.
65.1 mm Spine
Cassette InlayBack
Cassette Label
www.touch-music.co.uk
Mint Copy Ltd, Studio House, Heaton Mersey Industrial Estate, Battersea Road, Stockport, Greater Manchester, SK4 3EA
Tel: 0161 432 9012
© Copyright 2016 Mint Copy Ltd