8/10/2019 totun

1/5

[Loader]# You can launch revLoader in two ways:## 1) Create a shortcut to revLoader and apply the following# command line options:## -appid where is the application in question.# If supplied revLoader will create a steam_appid.txt# file with the value specified# -launch where is the executable to# launch## All other command line options are passed through to the# launched executable, so:## revLoader.exe -appid 12345 -launch MyApp.exe -silent /help## This will create a steam_appid.txt file with the value 12345# Before launching MyApp.exe with the arguments -silent /help## 2) Specify the name of the application to load in the ProcName# setting below as with previous versions of revLoader.# You can also specify the command line if required.

## e.g ProcName=MyApp.exe -silent /help#ProcName=csgo.exe -steam -silent /help

[Emulator]

# CacheEnabled set to true to enable loading apps from GCF.# If it is true, and a clientregistry.blob file is not supplied,# then you must supply revApps.ini file with the correct cache requirements.# See the example revApps.ini, however it is highly recommended that you use# a clientregistry.blob file for maximum compatibility

## Default = False#CacheEnabled = false

# CachePath - set to the folder where your GCF files are located## Default = (n/a)#CachePath = D:\Steam\SteamApps

# Language - rev emu will automagically load the correct language files.# This can be English, French, Italian, German, Spanish, sChinese,

# Korean, Koreana, tChinese, Japanese, Russian, Thai, or Portugeuse## revEmu will try to set the Language key in the following order:# Use the Language key in the this rev.ini if it is present# Use the Steam Language key in the registry if it is present# Default the Language to English##Language =englishLanguage = Spanish

8/10/2019 totun

2/5

# Change Logging to True to enable/disable log file output for steam.dll## Default = False#Logging=false

# Change SteamDll to point to your official Steam client DLL.# This setting is required for Steam UserID Validation functions# to support legit Steam IDs. Otherwise, all clients would get# IDs generated from their IP addresses.# Also make sure you uncomment the line below (remove "#")# if you want to use this setting!# Note that this setting only applies to games using SteamGameServer# up to version 003. (e.g. CS: Source, Team Fortess 2, Garry's Mod)## Default = (n/a)#SteamDll=.\Steam\Steam2.dll

# Change SteamClient to True if you want to use the steamclient emulator.# This setting is recommended to be true for both clients \ game servers# and for all games, except games which use SteamClient006 interface# (e.g. CS: Source, Half-Life 2: Deathmatch)# To see if the game is using this old interface, enable SteamClient,

# enable Logging and you will notice a log line "Using SteamClientXXX".# If 007, leave the option ON, otherwise, it is recommended not to use it.## Default = False#SteamClient = True

# Change SteamUser to the steam username that you wish to use with revEmu# Defaults to revCrew if not specified#SteamUser = SteamPlayer

[Log]

# If Logging is set to True, choose which functions would you like to log.## Default = False#FileSystem=FalseAccount=FalseUserID=False

[steamclient]

################################### NOTE ##################################### These settings may apply even if you don't choose to use steamclient.dll! #

############################################################################### Change the setting below to set your PlayerName (used in src2007 engine)# not use ""## Default = REVOLUTiON#PlayerName=schmucke210

8/10/2019 totun

3/5

# Change the setting below to enable/disable log file output for steamclient.dll## Default = False#Logging=true

# Change ClientDLL to point to the original steamclient.dll# This setting will enable VAC for your server and your server will be listed# on Valve master server! Also, Steam clients will have their regular Steam IDs# Please use the steamclient.dll from Steam folder!## Default = (n/a)##ClientDLL=.\bin\Steam\steamclient.dll

# DisableUnlockedItems enables you to choose whether to use the new weapons in# Team Fortress 2. This setting applies to you only if you are a regular player,# or to all your clients if you are a server hoster.## Default = False##DisableUnlockedItems = True

# If you use in Ultimate SSDK change the setting below to True# use only Ultimate SSDK enable else disable.## Default = False##EnableSDK = True

#Use DNS masterservers valve, if port mastersrver 27010-27011 not problem#if port 27015 use mix MasterServer = 208.64.200.65:27015## Default = False##Use_hl_master = true

#Change the setting to set masterserver, from where serverlist will be got.#No support Setti masterserver.....#Default = 72.165.61.136:27015 only for HL2#Friends tab in serverbrowser shows another masterserver for VIP server ($)##HL1 servers#MasterServer = 188.40.40.201:27010#MasterServer = 69.28.158.131:27010#MasterServer = 209.197.20.34:27010#MasterServer = 69.28.140.247:27010##HL2 servers

#MasterServer = 208.64.200.52:27011#MasterServer = 208.64.200.65:27015#MasterServer = 63.234.149.83:27011#MasterServer = 63.234.149.90:27011##rdkf##MasterServer = 68.142.72.250:27012

8/10/2019 totun

4/5

#Search game version in MasterServer.#Default search all version.##GameVersion = 1.0.0.75

#Add rename ClanTag maximum 12 symbol UTF-8 or 24 symbol ANSI#ex. ClanTag = revcrev#ClanTag=[revcrew]

## Use avatar enable. Test images no-steam avatar in platform/avatar1.dat(delete\rename it`s file not show this images)## Default = False#Use_avatar = true

[GameServer]

# GameServer policy rules# Allow (v9.73 < revEmu < 9.83) clients to join your server#

# Default = True#AllowOldRev74=False

# Allow revEmu v9.63 ~ 9.73 clients to join your server# revEmu v9.62 and below will be rejected nevertheless## Default = True#AllowOldRev=False

# Allow unknown clients to join your server#

# Default = True#AllowUnknown=False

# Allow cracked Steam clients to join your server## Default = True##AllowCracked=False

# Allow legitimate Steam clients to join your server## Default = True

##AllowLegit=False

#Allowed any count connect Unknown client with one IP (25 Unknown clients 1 IP default true)##AllowedAnyCountConnectUnknownClientWithOneIP = false

# Allow shows bots as normal players in the server(in serverbrowser)

8/10/2019 totun

5/5

## Default = falseFake_player= false

# Allow revemu clients to join your server (steamid subject to substitution)## Default = falseRevEmu_2012 = false

#Add count player in server name etc. (17/32).##Default false.#AddCountPlayerInServerName = false

#Detect IP with connect client RevEmu for HL2... While you can not use##Default false.##DetectIP = true

[GameServerNSNet]

#Use only tf2 server example: EnableNSNetSvc = UDP##EnableNSNetSvc = [False/UDP/TCP/BOTH]#EnableNSNetSvc = UDP

#ServerIPNSNet =##NSNetDedicatedPort = ( Slave )#AdditionalSlaveServer = IP:PORT#AdditionalSlaveServer = IP:PORT#AdditionalSlaveServer = IP:PORT#AdditionalSlaveServer = IP:PORT