toshiba printer project

Printer Manual

Toshiba Customer Support

Toshiba America Business Solutions

9740 Irvine Boulevard

Irvine, CA 92618

Phone: 1-800-Go-Toshiba

http:www.toshiba.com/estudio/

support

TOSHIBA e-STUDIO 355SE

2

Customer Support United States 1-800-Go-Toshiba http://www.toshiba.com/estudio/support

Table of Contents System Components 3

Basic Copying 4

Copying from Automatic Document Feeder 5

Duplex Copying 6

Faxing 7

Printing Envelop 8

Printing from Windows Applications 9

Paper Loading 10

Replacing Toner Cartridge 11

Store and Handle Paper 12


3

System Components

10 7

8

9

6

5

3

2

1

11

12 4

1. Bypass Feed 7. Automatic Document Feeder

2. Paper Supply Drawer Legal Size (8.5x14’’) 8. Top Lid

3. Paper Supply Drawer Letter Size (8x11’’) 9. Original Class

4. Toner Cartridge 10. Receiving Tray

5. Touch Panel 11. Paper Exit Stopper

6. Hard Buttons 12. Main Power Switch

4

Basic Copying

1. Place document face down on the glass and align it

against the left rear corner of the glass

2. Key in the number of copy (s) as needed

3. Close the lid

4. Press the START button



5

Copying from Automatic Document Feeder

1. Place document (s) in Automatic Document Feeder


3. Press the START button



6


Duplex Copying

1. Place document (s) on the glass/Automatic Document

Feeder

2. Select the ‘1-2 Duplex’ on the Touch Panel

3. Select the option (s) following:

1-2 Duplex-One-Side original to Two-Sided Copy

2-2 Duplex-Two-Sided original to Two-Sided Copy

2-1 Split-Two-Sided original to One-Sided Copy


5. Press COPY button


7


Faxing

1. Place document (s) on glass/Automatic Document

Feeder

2. Press the FAX on the Touch Panel

3. Select the fax number using the Digital Keys or

Address Book

4. Press Send on the Touch Panel


8

Printing Envelop

1. Place envelop (s) with short end on the Bypass Feeder

2. Flip the green lever

3. Press the Job Status button

4. Select the Envelop on the Touch Panel

5. Press the PRINT button



9


Printing from Windows Applications

1. Click File and select PRINT from the menu of the

application

2. Select the correct printer name– make sure that the

printer status is ready

3. Set the print options on each tab according to how you

want to print such as all pages, one page, size of paper,

print one sided, or both sided

4. Select PRINT


10

Paper Loading

1. Pull out the paper drawer

2. Fan a stack of paper; then tap it on a flat surface to even

the edges.

Note: Remove damaged paper (s) if any

3. Place a stack of paper into the drawer

4. Close the drawer



11

Replacing Toner Cartridge

1. Open the front cover

2. Hold down the green lever and remove the old

cartridge at the same time

3. Make sure to shake the new cartridge well with the

label surface down

4. Remove the protective sheet from the end of the new

toner cartridge

5. Pull out the seal in the direction of the arrow

6. Insert the toner cartridge along the rail until it clicks

7. Close the front cover



12

Store and Handle Paper

Store the paper at room temperature and in an en-

closed space that is flat, dry, and easily accessible

Store the paper in its original packet until it is ready for

use

Be sure to reseal the paper package with tape after it is

opened to prevent dust accumulating on the paper



toshiba printer project

Documents