toshiba - ribbon · 2012-08-03 · for on/standby mode when using a toshiba vcr or dvd: pressm...

47WLT66Owner's manual

TOSHIBA

g g

?For televisionoperation queries,please ring the

helpline…

Remember…

2

Contents

SETTING UPSafety precautions – Some do’s and don’ts for you to be aware of 3Installation and important information 4The remote control – an at-a-glance guide 5Connecting external equipment – a guide to connecting external equipment to the back of the television 6Connecting a computer – connecting a computer to the back of the television 7Controls and input connections – switching on the television, standby, using the controls on the television,

headphone socket, connecting equipment to the side input sockets 8

TUNING THE TELEVISIONDIGITAL – tuning the television for the first time 9DIGITAL – auto tuning 10DIGITAL – programme sorting, manual tuning 11ANALOGUE – tuning analogue mode for the first time, language, country 12ANALOGUE – manual tune, broadcast system 13ANALOGUE – auto tune 14ANALOGUE – programme skip, sorting programme positions 15

CONTROLS AND FEATURESGeneral controls – changing programme position 16Stereo and bilingual transmissions – stereo/mono or dual language broadcasts (analogue only) 16Time display (analogue only) 16Sound controls – volume, sound mute, bass/treble/balance 16Sound controls – bass boost, dual (analogue only), stable sound® 17SRS WOW™ sound effects – SRS 3D, FOCUS and TruBass 17Widescreen viewing 18Picture controls – picture position (analogue only), back light 20Picture controls – picture preferences (contrast, brightness, colour, tint, sharpness), black stretch,

MPEG noise reduction (MPEG NR), digital noise reduction (DNR), colour temperature 21Picture controls – 3D colour management, base colour adjustment, cinema mode, antenna amplifier 22Picture controls – automatic format (widescreen), blue screen, side panel adjustment,

picture still 23Panel lock – disabling the buttons on the television 23DIGITAL – programme timer 24Sleep timer 24DIGITAL – on-screen information and programme guide 25DIGITAL settings – parental controls (setting the PIN, mode) 26DIGITAL settings – favourite programmes, locked programmes, encrypted programmes 27DIGITAL settings – audio languages, subtitles, reset TV, common interface 28DIGITAL settings – software upgrade (version, auto upgrade, searching for new software) 29PC settings – picture position, clock phase, sampling clock, reset 30 Input selection and AV connections – input and output sockets for connected equipment,

analogue switch off 31TEXT SERVICES

ANALOGUE text – setting up, general information, Auto. and LIST modes 33ANALOGUE text – control buttons 34DIGITAL interactive services – general information 34

PROBLEM SOLVINGQuestions and Answers – answers to some of the more common queries including

manual fine tuning and colour system 35

INFORMATIONNotes – for your own records 38Specifications and Accessories – technical information about the television, supplied accessories 40

g g

3

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like anyelectrical equipment, care must be taken to obtain the best results and for safety to be assured. Please readthe points below for your own safety. They are of a general nature, intended to help with all electronicconsumer products and some points may not apply to the goods you have just purchased.

DO NOT obstruct the ventilation openings of theequipment with items such as newspapers,tablecloths, curtains, etc. Overheating will causedamage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposedto dripping or splashing or objects filled with liquids,such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources,such as lighted candles or nightlights on, or close toequipment. High temperatures can melt plastic andlead to fires.

DO NOT use makeshift stands and NEVER fix legswith wood screws. To ensure complete safety,always fit the manufacturers’ approved stand,bracket or legs with the fixings provided accordingto the instructions.

DO NOT listen to headphones at high volume, assuch use can permanently damage your hearing.

DO NOT leave equipment switched on when it isunattended, unless it is specifically stated that it isdesigned for unattended operation or has astandby mode. Switch off by withdrawing the plug,make sure your family know how to do this. Specialarrangements may need to be made for peoplewith disabilities.

DO NOT continue to operate the equipment if youare in any doubt about it working normally, or it isdamaged in any way – switch off, withdraw themains plug and consult your dealer.

ABOVE ALL – NEVER let anyone, especiallychildren, push or hit the screen, push anything into holes, slots or any otheropenings in the case.

NEVER guess or take chances with electricalequipment of any kind – it is better to be safethan sorry.

Leave at least 10cm clearance around the televisionto allow adequate ventilation. This will preventoverheating and possible damage to the television.Dusty places should also be avoided.

Damage may occur if the television is left in directsunlight or near a heater. Avoid places subject toextremely high temperatures or humidity. Place in alocation where the temperature remains between5°C (41°F) min. and 35°C (94°F) max.

The mains supply required for this equipment is220-240v AC 50/60Hz. Never connect to a DCsupply or any other power source. DO ensure thatthe television is not standing on the mains lead.DO NOT cut off the mains plug from thisequipment, this incorporates a special RadioInterference Filter, the removal of which will impairits performance. In the UK, the fuse fitted in thisplug is approved by ASTA or BSI to BS1362. Itshould only be replaced by a correctly rated andapproved type and the fuse cover must be refitted. IF IN DOUBT PLEASE CONSULT A COMPETENTELECTRICIAN.

DO read the operating instructions before youattempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads andinter-connections between pieces of equipment) are properly made and in accordance with themanufacturers’ instructions. Switch off andwithdraw the mains plug before making orchanging connections.

DO consult your dealer if you are ever in doubtabout the installation, operation or safety of yourequipment.

DO be careful with glass panels or doors onequipment.

Air Circulation

Do notHeat Damage

Mains Supply

Do

DO NOT REMOVE ANY FIXED COVERS AS THISWILL EXPOSE DANGEROUS AND 'LIVE' PARTS.

THE MAINS PLUG IS USED AS ADISCONNECTING DEVICE AND THEREFORESHOULD BE READILY OPERABLE.

g g

4

Installation and important information

Where to install

Locate the television away from direct sunlight and stronglights, soft, indirect lighting is recommended for comfortableviewing. Use curtains or blinds to prevent direct sunlightfalling on the screen.

Place on a sturdy platform, the mounting surface should beflat and steady. It should then be secured to the wall with asturdy tie using the clip on the back of the stand, or securedto the platform using the fixing strap located underneath thetable top stand, this will prevent it from falling over.

The LCD display panels are manufactured using anextremely high level of precision technology, howeversometimes some parts of the screen may be missing pictureelements or have luminous spots. This is not a sign of amalfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break ordamage the screen, and that small items cannot be inserted into slots or openings in the case.

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:i) fire;ii) earthquake;iii) accidental damage;iv) intentional misuse of the product;v) use of the product in improper conditions;vi) loss and/or damage caused to the product whilst in the possession of a third party;vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s

manual;viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limitedto the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation ormisuse of the product.

If stationary images generated by text services, channel identification logos, computer displays, video games, on screen menus, etc.are left on the television screen for any length of time they could become conspicuous, it is always advisable to reduce both thebrightness and contrast settings.

Side View Top View

Sturdy tie(as short as possible)

Clip

Clip

Clip

g g

5

The remote controlUP

Simple at-a-glance reference of your remote control.

Remove the back cover to reveal the battery compartment and make sure the batteries are insertedthe right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove dead batteriesimmediately to prevent acid from leaking into the battery compartment. Do not expose to excessiveheat such as sunshine, fire or similar. Dispose of them in a designated disposal area.

The performance of the remote control will deteriorate beyond a distance of five metres or outside anangle of 30 degrees from the centre of the television. If the operating range becomes reduced thebatteries may need replacing.

Inserting batteries and effective range of the remote

To alter the volume

To display digital on-screen information

To call up text services in analogue modeand interactive services in digital mode

Text and interactive service controlbuttons

To exit Menus

Selectable picture preferences

To mute the sound

To select input from external sources

To select mode

Widescreen viewing

On-screen Menus

To change programme positions and text pages

To display the digital on-screenProgramme Guide

To switch between TV, Radio and Favouriteprogrammes when in digital mode

Number buttons

To return to the previous programme

For On/Standby mode

When using a TOSHIBA VCR or DVD:pressm/llr to PAUSE/STEPpressr to PLAYpressqto REWINDpresssto FAST FORWARDpresswto EJECTpressp to STOPpress lqto SKIP-REWINDpresssl to SKIP-FORWARD

When using menus the arrows move thecursor on the screen up, down, left orright. OK to confirm your selection

When in TV mode:u Still pictureOI/II Stereo/bilingual transmissionsSUBTITLE Digital Subtitles8/9 Time displayWhen using the Programme Guide:lq – 24 hours

sl + 24 hours

g g

6

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switchremove the mains plug from the wall socket.

HDMI™ (High-Definition Multimedia Interface) is for usewith a DVD, decoder or electrical equipment with digitalaudio and video output. It is designed for bestperformance with 1080i high-definition video signals butwill also accept and display 480i, 480p, 576i, 576p and720p signals.

A wide variety of external equipment can beconnected to the back of the television, thereforethe relevant owners manuals for all additionalequipment must be referred to.

We recommend SCART 1 for a decoder and SCART 2 fora media recorder.

If connecting S-VIDEO equipment, set the INPUT forEXT2. See page 31.

If the television automatically switches over to monitorexternal equipment, return to normal television bypressing the desired programme position button. Torecall external equipment, press B to select betweenDTV, EXT1, EXT2, EXT3(C), HDMI1, HDMI2, PC, or ATV.

The cable holder can be used for aerial, media recorderand audio cables. Do not use the cable holder as ahandle and make sure all cables are removed beforemoving the television.

HDMI, the HDMI logo, and High-Definition Multimedia Interface aretrademarks or registered trademarks of HDMI Licensing, LLC.

Before connecting the aerial, video and audiocables, remove the back terminal covers bysqueezing the tab and pulling the covers out.

Aerial cables:

Connect the aerial to the socket on the rear of thetelevision. If you use a decoder* and/or a media recorderit is essential that the aerial cable is connected throughthe decoder and/or through the media recorder to thetelevision.

SCART leads:

Connect the video recorder IN/OUT socket to thetelevision. Connect the decoder TV socket to thetelevision. Connect the media recorder SAT socket to thedecoder MEDIA REC. socket.

Before running Auto tuning put your decoder and mediarecorder to Standby.

The phono sockets alongside the COMPONENT VIDEOINPUT sockets will accept L and R audio signals.

In addition there is a fixed/variable external audio ouputwhich enables the connection of a suitable Hi-Fi unit.Make sure the Speaker option in the Sound menu is setto Off. The variable option is altered by using the soundcontrols.

media recorder

decoder*

CABLE HOLDER

FIXING STRAP

HDMI™ INPUT SOCKETS

COMMON INTERFACE

The Common Interface isfor a Conditional AccessModule (CAM). There isaccess for two CAMs.

Contact a service provider.COMPONENTVIDEO (EXT3)

SCART 1 (EXT1)

SCART 2 (EXT2)

*a decoder

could be Digital

Satellite or any

other compatible

decoder.

☛IN/OUT MEDIA

REC.TVSAT

g g

7

Connecting a computer

the back of your television

Computer

Audio cable for PC totelevision connection

(not supplied)

Conversion adaptor if required (not supplied)

RGB PC cable(not supplied)

Mini D-sub 15 pin connector

Before connecting any external equipment, turn off all main power switches. If there is no switchremove the mains plug from the wall socket.

Connect the PC cable from the computer to the PCterminal on the back of the television.

Connect the audio cable to the PC/HDMI1 Audiosocket on the back of the television. Select PC from thePC/HDMI1 audio options in the AV connectionmenu located in the SET UP menu.

Press the B to select PC mode.

The following signals can be displayed:

VGA: 640 x 480/60 Hz (VESA)SVGA: 800 x 600/60 Hz (VESA)XGA: 1024 x 768/60 Hz (VESA)SXGA: 1280 x 1024/60 Hz (VESA)IMPORTANT NOTE: SXGA will display but it willnot be to VESA standard.

PLEASE NOTE:Some PC models cannot be connected to thistelevision.

An adaptor is not needed for computers with a DOS/Vcompatible mini D-sub 15 pin terminal.

A band may appear at the edges of the screen or partsof the picture may be obscured. This is due to scalingof the picture by the set, it is not a malfunction.

When PC input mode is selected some of thetelevision’s features will be unavailable e.g. Manualsetting in the SET UP menu, Colour, Tint, DNR andBlack Stretch in the Picture settings menu.

Signal information for Mini D-sub 15 pin connector

Pin assignmentfor RGB/PCterminal

Pin. No. Signal name Pin No. Signal name

1 R 9 NC

2 G 10 Ground

3 B 11 NC

4 NC (not connected) 12 NC

5 NC 13 H-sync

6 Ground 14 V-sync

7 Ground 15 NC

8 Ground

g g

8

Controls and input connections

If the RED LED is unlit check that the mains plug isconnected to the power supply. If the picture does notappear press i on the remote control, it may take a fewmoments.

To put the television into Standby press i on the remotecontrol, the GREEN active standby LED will appear (see ‘Software Upgrade’ section) next to the RED for a fewmoments then disappear. To view the television press iagain. The picture may take a few seconds to appear.

A wide variety of external equipment can be connected to the input sockets on the side of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, thebuttons on the television may be used for some functions.

To alter the volume press —j+.

To alter the programme position press eeFff.

Press MENU and S, R,Q or P to control the soundand picture options.

Press MENU twice to finish.

When connecting sound equipment to EXT3, connectthe audio output of the equipment to thephono socketson the television.

To select the Input, press B until the display showsEXT3 as described on page 31. The television willautomatically sense the type of signal.

Please always refer to the owner’s manual of theequipment to be connected for full details.

Please note: Inserting the headphone plug will mute thesound from all speakers.

Switching on

Using the controls and connections

Standby

GREEN LED – Active standby

RED LED – Power on

INPUT 3(EXT3)

Press the MENU button on the remote control to see the menus.

In digital mode the menu bar at the top of the screenswill show three different topics shown in symbols. As eachsymbol is selected by pressing the Sor Rbutton on theremote control, its respective options will appear below.

In analogue mode the menu appears as a list of fivetopics. As each symbol is selected by pressing the Sor Rbutton on the remote control, its respective options will appear below.

To use the options press the P and Q button on theremote control to move up and down through them andOK, Sor R to select the required choice. Follow the onscreen instructions. The functions of each menu aredescribed in detail throughout the manual.

Using the remote control

Input 3 (side) will takepriority over EXT3 (back) ifboth connectionsare used at thesame time.

☛

g g

9

Tuning the television for the first time

Before switching on the television put your decoder and media recorder to Standby if they are connectedand ensure the aerial is connected. To set up the television use the buttons on the remote control as detailedon page 5.

EXIT Cancel

AUTO TUNING

Progress

Prog. Name Type UHF Quality

70 CBBC Channel 34 GOOD

87 Community 21 POOR

Thank you for choosing this Toshiba television.

First you need to tune your television.Please ensure the aerial is connectedbefore proceeding.

Press to continue

1

2

3

4

Press the power-on button, the Welcome screenwill appear. This screen will appear the first timethat the television is switched on and each timethe television is reset.

Use Q orP to move through the list to select aprogramme then press OK to view.

Press OK to start tuning.

The AUTO TUNING screen will appear and thetelevision will start to search for available stations.The progress bar will move along the line.

You must allow the television to complete the search.

When the search is complete the television willautomatically select programme one.

The AUTO TUNING screen will display the totalnumber of services found.

Change WatchPage Up Page Down Sort

AUTO TUNING

86 programmes found55 TV 24 Radio 7 Text

Press OK to watch programmeProg. Name Type UHF Quality

1 BBC ONE 34 GOOD

2 BBC TWO 34 GOOD

3 ITV1 31 GOOD

4 Channel 4 31 POOR

5 five 48 GOOD

6 ITV2 31 POOR

g g

Use Q orP to move through the list to select aprogramme then press OK to view.

At any time by pressing and holding B a listwill appear on screen showing modes and allstored external equipment. Use P and Q tohighlight and OK to select.

3

10

NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.

Digital auto tuning

The television will start to search for all availablestations.


When the search is complete the Auto tuningscreen will display the total number of servicesfound.

Auto tuning

1 Press MENU, the SETUP MENU will appear.Use Q to highlight Auto tuning. Press OK.

A screen will appear warning that previousdigital programmes and settings will be deleted.Press OK to continue with the Auto tuning.

2

Auto tuning will completely re-tune the television and can be used to up date the channel list.

It is recommended that Auto tuning is runperiodically to ensure that all new services areadded. All current programmes and settings, i.e.favourites and locked programmes, will be lost.

WARNING

! All previous digital programmes andsettings will be deleted.Continue?

YES

Select MENU Cancel

Change WatchPage Up Page Down Sort

AUTO TUNING

86 programmes found55 TV 24 Radio 7 Text

Press OK to watch programmeProg. Name Type UHF Quality

1 BBC ONE 34 GOOD

2 BBC TWO 34 GOOD

3 ITV1 31 GOOD

4 Channel 4 31 POOR

5 five 48 GOOD

6 ITV2 31 POOR

When DTV mode is selected pressing Brepeatedly will scroll through all connectedequipment and the last channel being viewed inDTV mode.

B3CB2B1DTVATVPCHDMI2

EXIT Cancel

AUTO TUNING

Progress

Prog. Name Type UHF Quality

70 CBBC Channel 34 GOOD

87 Community 21 POOR

g g

NOTE: When the television is switched off the mode being viewed at the time will automatically be selectedwhen the television is switched back on.

11

Digital programme sorting, manual tuning

With the list of stations now showing useQ orP to highlight the station you want tomove and press R .

The selected station will be moved to the right ofthe screen.

Sort Store MENU Back EXIT Watch TV

Page Up Page Down

PROGRAMMES

Prog. Name

1 BBC ONE

2 BBC TWO

3 ITV1

4 Channel 4

5 five

6 ITV2

4

3

5

Use Q orP to move through the list to yourpreferred position. As you do so the otherstations will move to make room.

Press S to store your move. Repeat as necessary,then press EXIT.

1

2

3

Select Manual tuning from the SETUP MENUand press OK.

Enter the multiplex number using the numberbuttons and then press OK. The television willautomatically search for that multiplex.

When the multiplex is found any channels notcurrently on the programme list will be addedand the programme information at the top ofthe screen will be updated.

Repeat as necessary. Press EXIT to finish.

This feature is available for service engineers or can beused for direct channel entry if the multiplex channel

is known.

The station order may be changed to suit personalpreference.

Manual tuning1 Press MENU, the SETUP MENU will appear on

screen.

Use Q to move down through the list andhighlight Programmes. Press OK.

2

Programme sorting

SETUP MENU

TV Setup OK

Languages OK

Auto tuning OK

Manual tuning OK

Programmes OK

MENU Back EXIT Watch TV

g g

12

Tuning Analogue mode for the first time

The Quick Setup feature will tune all analogue channels currently available in the area. To put thetelevision into ATV mode press and hold B then use P or Q to highlight ATV. Press OK to select.

Manual tuningProg. Channel Station

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C69

6 C69

OK Select SortMENU Back EXIT Watch TV

3

4

2 Using S or R select your language, then pressOK.

Then press S or R to select your country.

To start Auto tuning press OK.

Auto tuningSearching

Channel : C22 Station : BBC1

EXIT Stop

5 The search will begin for all available stations.The slide bar will move along the line as thesearch progresses.


When the search is complete the television willautomatically select programme position 1 andthe Manual tuning screen will appear.

Use Q orP to move through the list to select aprogramme then press EXIT to view.

The station order may be changed using theManual tuning screen (see the analogue‘Sorting programme positions’ section).

At any time by pressing and holding B a listwill appear on screen showing modes and allstored external equipment. Use P and Q tohighlight and OK to select.

7

When ATV mode is selected pressing Brepeatedly will scroll through all connectedequipment and the last channel being viewed inATV mode.

B2B1DTVATVPCHDMI2HDMI1

1 Select ATV mode. The Quick Setup screen willappear.

Quick Setup

Select your language.

Language English

EXIT Watch TV OK Next

g g


0 C60

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C69


4 Press R to select System and use P or Q tochange if required.

Then press R to select Search.

Press P or Q to begin the search. The searchsymbol will flash.

13

Analogue manual tune

Press OK to select. If the programme is skipped,Programme skip must be removed beforestoring.

The television can be tuned-in manually using Manual tuning. For example: if the television cannot beconnected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.

Programme: The number to be pressed on the remote control.System: Specific to certain areas.

Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

Programme skip: means nothing has been stored or the facility to skip the channel is ON. See page 15.Channel: The channel number on which a station is being broadcast.

Search: Search up and down for a signal.Manual fine tuning: Only used if interference/weak signal is experienced. See page 35.

Station: Station identification. Use the P or Q and Sor Rbuttons to enter up to seven characters.

StationProgramme System Coloursystem

Channel SearchProgrammeskip

Manual finetuning

Use P or Q to highlight the programmeposition required e.g. we suggest Prog. 0 for a media recorder.

Press MENU and using S or R select the SET UPmenu, with Q highlight Manual tuning, pressOK to select.

To allocate a programme position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder and press PLAY, then manually tune.

Use Sand R to move across the screen and select any of these Manual Tune options.

1

2

3

Each signal will show on the television, if it is notyour media recorder, press P or Q again torestart the search.

7

5

6

1/2

Manual tuningSystem

0 I A C 60 0

OK StoreMENU Back EXIT Watch TV

Manual tuningSearch: Up

0 I A C 60 0


DifferentChannelnumbersmay bedisplayed

SET UP Language English

Country UK

Auto tuning OK

Manual tuning OK

Antenna Amplifier On

AV connection OK


g g

Using Auto tuning

1

2

3

4

5

To set up the television using Auto tuning, pressMENU and use S or R to select the SET UP menu.


When the search is complete the television willautomatically select programme position 1. This may notbe a clear picture, so the station order can be changed(see 'Sorting programme positions' section).

Press Q to highlight Language and S or R toselect.

Using Q highlight Country, then Sor R to select.The television will now tune the stations for yourcountry.

Press Q to highlight Auto tuning, then press OK.

1/2

Auto tuning

Previous settings will be lost !Press EXIT for no change.Press OK to start Auto tune.


!

14

Analogue manual tune continued,

Auto tuneWhen your media recorder signal is found, pressR to move along to Station. With P, Q, S andR put in the required characters, e.g. VCR.

This television has direct channel entryif the channel numbers are known.

Select the Manual tuning screen in Step 3. Enter theProgramme number, the System, then C forstandard (terrestrial) channels or S for cable channelsand the Channel number. Press OK to store.

8

Press OK to store.

Repeat for each programme position you wantto tune or, press MENU to return to the list ofchannels and select the next number to tune.

Press EXIT when you have finished.

To name external equipment, e.g. DVD on EXT2,press B to select EXT2, then select Manualsetting from the SET UP menu.

Press R to select Label then using P, Q, S andR put in the required characters. Press OK.

10

11

12

13

9

PLEASE NOTE

Manual tuningStation

0 I A C 60 0 V C R


Manual settingLabel

EXT2 A D V D



Country UK

Auto tuning OK

Manual tuning OK


AV connection OK


To start Auto tuning press OK.

g g


0 C60 VCR

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C69


15

Analogue programme skip, sorting programme positions

Press MENU and repeat from Step 2 or pressEXIT.

Each programme position has to be individuallyselected. To turn Programme skip off, repeat theprocedure for each position.

Skipped programme positions cannot be selectedby Pf and Peor by the controls on thetelevision, but can still be accessed by the numberbuttons on the remote control.

3

4

5

Use P or Q to highlight the programme positionto be skipped and press OK to select.

Press R to select Programme skip.

Use P or Q to turn Programme skip on. Press OK.

on the screen indicates a skippedprogramme position.

To prevent certain programmes from being viewed, theprogramme position can be skipped. The remote control

must be removed as the channels will still be available usingthe number buttons. Programmes can then be watched asnormal using the controls on the television, but the television

will not show the skipped programme position.

Programme skip

Select Manual tuning from the SET UP menu. 1

Channels may be moved and stored on the programmeposition of your choice.

Sorting programme positions

Select Manual tuning from the SET UP menu.

With the list of stations now showing use Q orPto highlight the station you want to move andpress R .

The selected station will be moved to the right ofthe screen.

1

2

Manual tuningProgramme skip : On

1 I A C 22 0 B B C 1


2

3

4

Use Q orP to move through the list to yourpreferred position. As you do so the other stationswill move to make room.

Press S to store your move.

Repeat as necessary, then press EXIT.


1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C69

6 C69

StoreMENU Back EXIT Watch TV

g g

Press Q to highlight Bass, Treble or Balanceand Sor R to change the setting.

When connecting to a Hi-fi unit, set the Speakeroption to Off. Then select Fixed or Variable forthe Monitor (Audio) in the AV connectionmenu. (See 'Input selection and AV connections'section).

Bass, Treble and Balance

4

In digital mode, press MENU and using Qhighlight TV setup then press OK.

Use Sor R to select SOUND.

In analogue mode, press MENU and Sor R toselect SOUND.

1

2

3

The sound controls are accessible in digital andanalogue modes, as are most of the televisions features.

SOUND Dual Dual 1

Bass 0

Treble 0

Balance 0

WOW OK

Stable sound On


1/2

16

General controls, stereo/bilingualtransmissions, time display, sound controls

VolumePress j— or j+ to adjust the volume.

Sound MutePress konce to turn the sound off and again to cancel.

To select a programme position use the numberedbuttons on the remote control.

Programme positions can also be selected using Pf andPe.

To revert to the previous programme position press ^̂ .

To display on-screen information i.e. programme position,channels or stereo/mono signal, press . Press againto cancel.

Selecting programme positions

Sound controls

The time display facility allows the current (text service)time to be seen on the television screen.

Press 8/9 whilst watching a normal televisionbroadcast to see a time display from the broadcaster. Itwill remain on screen for about 5 seconds.

The Time Display – analogue only

i+

If stereo or dual language broadcasts are transmitted theword Stereo or Dual will appear on the screen each timeprogramme positions are changed, disappearing after afew seconds. If the broadcast is not in stereo the word

Mono will appear.

Stereo… Press OI/II to select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they aretransmitted the word Dual will display. Choose therequired programme number and if the word Dualappears press OI/II to select Dual 1, Dual 2 or Mono.

Stereo and Bilingual transmissions – analogue only

2/2SOUND Speaker Off

Bass boost On

Bass boost level 70


g g

SOUND Dual Dual 1

Bass 0

Treble 0

Balance 0

WOW OK

Stable sound On


1/2

17

Sound controls continued, SRS WOW™ soundeffects, dual, stable sound®

SRS WOW™ sound effects

SRS WOW™ is a suite of audio effects which use thestereo signals being broadcast to produce enhanced soundfrom the television’s speakers. If mono sound is broadcast

only TruBass will be available.

SRS 3D gives a rich sound experience, FOCUSconcentrates the sound and gives the effect of it comingfrom the centre of the television, TruBass enhances the

lower bass frequencies.

Stable sound®

The Stable Sound feature limits high volume levels andprevents the extreme changes in volume that can occur

when channels are changed or a programme switches to a commercial.

Bass boost

In the SOUND menu press Q to highlight Bassboost. Use S or R to select On.

Then press Q to highlight Bass boost level andusing S or Radjust to suit your preference.

1

2

Bass boost enhances the depth of the sound. Thedifference will only be noticeable on sound with a

strong bass.

1

2

Press MENU and select the SOUND menu.

Use P or Q to highlight WOW then press OK.

3

4

5

Press Q to highlight SRS 3D and using S or R select between On or Off.

Then press Q to highlight FOCUS and press S or R to select between On or Off.

Highlight TruBass and use S or R to select Off,Low or High to suit your preference.

NOTE: This feature is not available throughheadphones.

1

2

Select the SOUND menu.

Use Q to highlight Stable Sound then press S or R to select On or Off.

Dual – analogue only

If a programme or film is being broadcast with asoundtrack in more than one language, the DUAL feature

allows selection between them.

1

2

Select the SOUND menu.

Use Q to highlight Dual then press S or R tochoose between Dual 1 or Dual 2.

WOW, SRS and • symbol are trademarks of SRS Labs, Inc.WOW technology is incorporated under license from SRS Labs, Inc.

WOW

SRS 3D On

FOCUS Off

TruBass Off


2/2SOUND Speaker On

Bass boost On

Bass boost level 70


g g

SUBTITLE

When subtitles are included on aletterbox format broadcast, this settingwill raise the picture to ensure that all

the text is displayed.

SUBTITLE

18

Widescreen viewing

SUPER LIVE 1

This setting will enlarge a 4:3 image tofit the screen by stretching the imagehorizontally and vertically, holding thecorrect proportions at the centre of the

image. Some distortion may occur.

Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.Press the { button repeatedly to select between Exact Scan, Wide, Super Live 2, Cinema 2, 4:3,Super Live 1, Cinema 1, Subtitle and 14:9.

SUPER LIVE 2

If a ‘side panel format’ signal is beingreceived this setting will enlarge theimage to fit the screen by stretchingthe image horizontally and vertically,holding the correct proportions at thecentre of the image. Some distortion

may occur.

CINEMA 1

When watching ‘letterbox format’films/video tapes, this setting will

eliminate or reduce the black bars atthe top and bottom of the screen byzooming in and selecting the image

without distortion.

CINEMA 2

When watching ‘all sides panel format’films/video tapes, this setting will

eliminate or reduce the black bars at allsides of the screen by zooming in andselecting the image without distortion.

g g

19

Widescreen viewing continued

14:9 Use this setting when watching a 14:9broadcast.

Use this setting when watching awidescreen DVD, widescreen video

tape or a 16:9 broadcast (when available). Due to the range of

widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visibleon the top and bottom of the screen.

WIDE

Use this setting to view a true 4:3broadcast.4:3

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display orcommercial gain may infringe on copyright laws.

Press and hold the { button and a list of all the widescreen formats will appear onscreen. Use P and Q to highlight the required format and OK to select.

Exact Scan

Wide

Super Live 2

Cinema 2

4:3

Super Live 1

Cinema 1

Subtitle

14:9

Use this setting when watching a1080i source, it will display the image

as transmitted without scaling orcropping the picture.

EXACT SCAN

This option is only

available when watching

a 1080i source.

☛

g g

PICTUREPicture settings OK

3D Colour management Off

Base colour adjustment

Cinema mode Off


2/2

20

Picture controls

To return to the original factory settings select Resetin the Picture position menu and press OK.

Picture position – analogue only

The picture position may be adjusted to suit personalpreference and can be particularly useful for

external inputs.

In the SET UP menu press Q until Picture position is highlighted.

1

Press OK to view the options available for thepicture format that has been selected.

Press P and Q to select an option, then S or Rto adjust the settings.

The options alter depending on the widescreenformat chosen and when viewing connectedequipment.

In Cinema 2:

2

3

In the Picture settings menu press Q to select Back light.

Press S or R to adjust.

2

3

In the PICTURE menu press Q to select Picture settings, then press OK.

1

Adjusting the Back light can improve the clarity of thescreen when viewing.

Back light

Picture position

Horizontal position 0

Vertical position 0

Reset OK


Picture settings

Back light 100

Contrast 100

Brightness 50

Colour 50

Tint 0

Sharpness 0


1/2

SET UP Picture position OK

Quick Setup OK


Most of the picture controls and functions are available in both digital and analogue modes. To access thethe required menus when in digital mode: press MENU and using Q select TV setup, press OK then S or Rto select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To accessthe required menus when in analogue mode: press MENU and use S or R to select the desired menu.

g g

In the Picture settings menu press Q untilColour Temperature is highlighted.

Press S or R to select between Normal, Warmand Cool to suit your preference.

1

2

Colour Temperature increases the ‘warmth’ or ‘coolness’of a picture by increasing the red or blue tint.

Colour temperature

Picture settings

Black stretch On

MPEG NR Off

DNR Auto.

Colour Temperature Normal


2/2

21

Picture controls continued

DNR enables you to ‘soften’ thescreen representation of aweak signal to reduce the noise effect.

DNR – Digital Noise Reduction

Select DNR from the Picture settings menu. UseS or R to adjust. The differences may not alwaysbe noticeable (for the best result use lower settings as picture quality can be lost if the settingis too high).

1

When watching a DVD the compression may cause somewords or picture elements to become distorted or pixelated.

Using the MPEG NR feature reduces this effect bysmoothing out the edges.

MPEG NR – Noise Reduction

Select MPEG NR from the Picture settingsmenu. Use S or R to select a setting to suit yourpreference.

1

Black Stretch increases the strength of dark areas of thepicture which improves the definition.

Black stretch

Press S or R to select between Onand Off. Theeffect depends on the broadcast and is mostnoticeable on dark colours.

1

2

Picture settings

Black stretch On

MPEG NR Off

DNR Auto.

Colour Temperature Normal


2/2

In the Picture settings menu press Q until BlackStretch is highlighted.

This television offers the choice of personalising the picturestyle. Press m to view the different styles available:

Picture mode-1 to 3 are preset options and Picture mode-M stores your own settings:

Use S or R to adjust the Contrast, Brightness,Colour, Tint and Sharpness.

Picture preferences

2

Select Picture settings from the PICTURE menu.1Picture settings

Back light 100

Contrast 100

Brightness 50

Colour 50

Tint 0

Sharpness 0


1/2

g g

1/2SET UP Language English

Country UK

Auto tuning OK

Manual tuning OK


AV connection OK


22

Picture controls continued

Press P and Q to select an option, then R toadjust the settings.

2

In the PICTURE menu press Q to select Base colour adjustment, then press OK.

1

The Base colour adjustment feature allows theadjustment of individual colours to suit personalpreference. This can be useful when using an

external source.

Base colour adjustment


3D Colour management On

Base colour adjustment OK

Cinema mode Off



3D Colour management On

Base colour adjustment OK

Cinema mode Off


When 3D Colour management is selected it allows the‘Base colour adjustment’ feature to become available.

3D Colour management

In the PICTURE menu press Q to select 3D Colourmanagement.

Press S or R to select On or Off.

1

2

To return to the original factory settings selectReset and press OK.

Base colour adjustmentHue Saturation Brightness

Red +2 +6 +4

Green 0 0 0

Blue 0 0 0

Yellow 0 0 0

Magenta 0 0 0

Cyan 0 0 0

Reset OK


In the PICTURE menu press Q to select Cinemamode.


1

2

If there are lines or jagged edges in the film or programmebeing viewed, selecting Cinema mode can help correct

this by smoothing out the picture.

Cinema mode

If the signal being received by the television is too strong,this may result in picture interference and/or a buzzingsound. Setting Antenna Amplifier to Off reduces the

signal strength, and can help to remove the interference.

In the SET UP menu press Q until AntennaAmplifier is highlighted.

With S or R select either On or Off.

Antenna amplifier

1

2

g g

From the FUNCTION menu select Panel lockand choose On or Off usingSor R.

Panel lock disables the buttons on the television. Allbuttons on the remote control can still be used.

Panel lock

1

When Panel lock is On, a reminder will appear whenthe buttons on the television are pressed. If the standbybutton is pressed the television will switch off andcan only be brought out of standby by using theremote control.

FUNCTION Teletext Auto.

Panel lock On

Auto format On

Blue screen On

Side Panel 1



Panel lock Off

Auto format On

Blue screen On

Side Panel 1


The Side Panel feature lightens or darkens the band eachside of the screen when in 4:3 or 14:9 format. This helpsprevent image retention of the band and can also makeviewing in bright or dark conditions more comfortable.

23

Picture controls continued,

panel lock

Automatic format (Widescreen)

When this television receives a true Widescreen picture and Auto format is On, it will automatically be displayed in

Widescreen format, irrespective of the television’s previous setting.

Blue screen

When Blue screen is selected the screen will turn blue andthe sound will be muted when no signal is received.

Press MENU and S or R to select theFUNCTION menu.

1

Press Q to highlight Auto format, then S or Rto select On or Off.

2

2

1

In the FUNCTION menu press Q until SidePanel is highlighted.

Press S or R to adjust.

1

2

Side panel adjustment

In the FUNCTION menu press Q to highlightBlue screen.


This feature is used to hold a still image on the screen.

Press u to hold an image on the screen, press uagain to cancel.

1

Picture still


Panel lock Off

Auto format On

Blue screen On

Side Panel 1


g g

24

The timers

Press Q to select the Sleep timer. Use thenumber buttons to set the required time. Forexample, to switch the television off in one and ahalf hours enter 01:30, or press S or R toincrease/decrease in steps of 10 minutes.

Press EXIT to finish.

This feature will set the television to go to a specificchannel at a certain time. It can be used to view a

particular programme, or by setting the mode to daily orweekly, can be used to view a series of programmes.

Programme timer – digital only

2

3

The television can be set to turn itself off after a certain time.

Sleep timer

1 Press MENU and S or R to select the TIMERmenu.

TIMER Sleep timer 01:30


Press Q to select Programme timers, then pressOK to select.

Press Q to select the first programme to betimed, then press OK. The SET TIMER menu willnow appear on screen.

Press P and Q to go through the list adding thedetails of the programme to be timed by usingthe number buttons and S and R to makeselections.

2

3

4

When all the details have been entered press OKto save the timer.

Auto-start VCR: If your Toshiba media recorder is AV linkcompatible setting this feature to YES will auto start/stop a recording.

PLEASE NOTE: When a timed programme is about tostart, an information screen will appear offering the optionof watching or cancelling the programme. The menus andother channels will not be available during the timedprogramme unless the programme timer is cancelled.

5

1 Press MENU and S or R to select the TIMERMENU.

TIMER MENU

Programme timers OK


SET TIMER

Programme BBC ONE 1

Date Fri, 13 Jan. 2006 13/01

Start Time 13.00

End Time 13.15

Repeat ONCE

Auto-start VCR NO

Subtitles NONE

Audio Language ENGLISH

0 - 9 Enter Number Save Timer BACK Cancel

12:18 Fri, 13 Jan.

g g

25

Digital on-screen information andProgramme Guide

When viewing in digital mode, the on-screen information and programme guide give access to programmedetails for all available channels.

The details of the programme will have beenadded to the screen. Press OK to save.

5

Information

Select information by pressing , theinformation screen will appear giving details of thechannel and programme currently being viewed.

1

12:14 Fri, 13 Jan.

BBC ONEBBC TWOITV1Channel 4five

11:30 Bargain Hunt x 12:15 Cash in the Attic

1 minute left I/II ENTERTAINMENT

A bargain bought at Peterborough Fair makes doubleits money at auction. [S] Then BBC News and Weather.

Showing also Bobinogs starting in 5 minutes on CBeebies…

…

Guide

Select the on-screen guide by pressing GUIDE, theguide screen will appear highlighting details of thechannel and programme currently being viewed.This may take a few moments to appear.

1

Press S or R for information of other programmesscheduled for the channel selected.

For details of other channels currently available,press P and Q to scroll up and down thechannel list. As the channel is selected details ofthe programme currently being broadcast willappear, then press S or R.

For information on a highlighted programmepress . To set the timer for that programmepress the BLUE button to bring up theProgramme timers menu.

NOTE: Recording can be set from both theinformation screen and guide. In order for therecording operation to work the media recordermust be AV link compatible.

2

3

4

To see details of any of the other channels currentlyavailable, press P and Q to scroll up and down thechannel list. As the channel is selected details of theprogramme currently being broadcast will appear.

Pressing the YELLOW button will activate Showingalso, giving details of programmes which havestarted on other channels.

To record the following programme, with theinformation guide showing, press R. The Tuneoption in the bottom section of the screen willchange to Record, press OK. The SET TIMERscreen will appear.

2

3

4

SET TIMER

Start Time 01:25

End Time 02:55

Repeat ONCE

Auto-start VCR NO

Subtitles NONE


0 - 9 Enter Number Save Timer BACK Cancel

12:18 Fri, 13 Jan.

BBC News001 BBC ONE 13:00-13:28 Fri, 13 Jan.

12.18 Fri, 13 Jan.

Page Up Page Down Timers

i+

i+

Bargain Hunt

ALL PROGS

BBC ONEBBC TWOITV1Channel 4fiveITV2BBC THREE8BBC FOURITV3Sky TravelUKTV History

Friday12:00 12:30 13:00 13:30Barga Cash in the Attic BBC Ne Spotli NeigThe Daily Po Working Lunch World Prof

This Mornin ITV News We It Today WitNews at No Whats in Cheers The Way Home and A Brainteaser Born to S

Judge Judy The Jeremy Kyle Show Airline

This is BBC THREE

This is BBC FOURKojak Quincy Quin

Canaries on Douglas Che Floyd Around Beauty Sch

What the St What the Vi Fred Dibnah' Fred Dibna

Tune EXIT Watch TV TV/FAV Change progsPage Up Page Down Showing also Languages

Record More info EXIT Watch TV TV/FAV Change progsi+

g g

26

Digital settings – parental control

In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked. Thesecan then only be accessed with a security code PIN when in digital mode.

PARENTAL CONTROL

Mode OFF

Change Pin OK


PARENTAL CONTROL

Mode OFF

Change Pin OK


This feature locks various menus to prevent the televisionbeing retuned or the settings being overridden.

Setting the PIN

1 Press MENU and R to select the FEATURE MENU.

Mode

1 In the PARENTAL CONTROL menu press Q toselect Mode.

2 Use S or R to choose between ON, OFF, LOCKMENU and LOCK INSTALL.

When menus that have been locked are nowselected they will only become available when thePIN is entered.

2 Use Q to select Parental Control then press OK.

Press Q to highlight Change Pin then press OK.3

4 Using the number buttons enter a four digitnumber, when these have been entered the screenwill ask you to confirm them by entering themagain.

5 Press MENU to go back to the Parental Controlscreen. The PIN number is now set.

CHANGE PIN

New PIN * * * *

Confirm PIN – – – –

0 - 9 Enter PIN MENU Back EXIT Watch TV

FEATURE MENU

Parental Control OK

Favourite and Locked Programmes OK

Favourites ALL PROGS

Common Interface Slots NO MODULE

Software Upgrade OK


g g

27

Digital settings – favourite programmes,locked programmes, encrypted programmes

Locked Programmes stops the viewing of digitalchannels, they can only be accessed by entering the PIN.

Locking programmes

1 From the FEATURE MENU press Q to selectFavourite and Locked Programmes.

Press R repeatedly to select the LockedProgramme list.

Use P and Q to go through the list of channelspressing OK to select the ones required, apadlock will appear in the box.

2

3

Press EXIT to finish

When any of the channels in the LockedProgramme list are now selected the PIN mustbe entered before they can be accessed.

4

5

Selecting Encrypted Programmes allows all encryptedprogrammes to be shown in the programme list even if

they are not available to select.

Encrypted programmes

1 In the FEATURE MENU press P or Q to selectEncrypted Programmes.

Use S or R to select ON or OFF.

NOTE: CAMs (Conditional Access Modules) areavailable from service providers (see 'CommonInterface' section)

2

Deselect MENU BackPage Up Page Down Lock all Unlock all

FAVOURITE AND LOCKED PROGRAMMES

Locked Programme: Yes

1 BBC ONE

2 BBC TWO

7 BBC THREE

10 BBC FOUR

30 CBBC Channel

31 CBeebies

Favourite Programmes creates a list of the digitalchannels that are watched most. Four lists can be created,

these can be a mixture of television, text and radio channels.

Selecting favourite programmes

1 From the FEATURE MENU press Q to selectFavourite and Locked Programmes .

2

3

4

Use P and Q to go through the list of channelspressing OK to select the ones required, a tick willappear in the box.

Press R to select List 2. Follow the sameprocedure to make the selection. When allfavourites have been selected press MENU toreturn to the FEATURE menu.

Use Q to highlight Favourites and S or R toselect between ALL, TV, RADIO, FAV-1 and FAV-2. The number of favourites availabledepends on how many lists have been created.

2 Press EXIT.

Using thef Pe buttons will now only accessthose channels in Favourite List 1 when FAV-1 isselected.

5

Select MENU BackPage Up Page Down Select all Deselect all

FAVOURITE AND LOCKED PROGRAMMES

Favourite List 1: No

1 BBC ONE

2 BBC TWO

7 BBC THREE

10 BBC FOUR

30 CBBC Channel

31 CBeebies

FEATURE MENU

Parental Control OK


Favourites FAV-1


Software Upgrade OK


g g

FEATURE MENU

Parental Control OK




Software Upgrade OK


28

Digital settings continued – audio languages,subtitles, reset tv, common interface

This feature allows a programme or film to be viewed witha choice of soundtrack language, provided they are

currently being broadcast.

Audio languages

1 From the SETUP MENU press Q to selectLanguages.

This feature will show subtitles on the bottom of the screen in the selected language provided they are being

broadcast.

Subtitles

1

2

From the LANGUAGES menu press Q to selectSubtitles.

Use S or R to select OFF, ENGLISH, WELSH orGAELIC.

2

3

Press OK, then press P or Q to highlight AudioLanguage.

Use S or R to select ENGLISH, WELSH orGAELIC.

NOTE: If more than one soundtrack is available,use OI/II to select between them.

The Common Interface Slot, situated on the back of thetelevision, enables the insertion of a CAM (ConditionalAccess Module) and card. These are purchased from a

service provider and allow additional subscriptionbroadcasts to be viewed. For information see a

service provider.

Common interface

1

2

Insert the CAM and card into the CommonInterface Slot, following the instructions providedwith the CAM. A box will appear on screen toconfirm that the CAM is loaded.

From the FEATURE MENU press P or Q toselect Common Interface Slots.

3 Details of the CAM should now be available. UseOK to select it. If two CAMs are inserted use S or R to select between the two.

Press MENU and then press Q until Reset TV ishighlighted.

Press OK to select. A screen will appear warningthat all digital settings will be lost, press OK tocontinue.

The Welcome screen will appear, press OK tocontinue, the television will then auto tune.

1

2

Selecting Reset TV will delete all stored digital channelsand settings. The television will return to factory settings

and then auto tune.

Reset TV

SETUP MENU

TV Setup OK

Languages OK

Auto tuning OK

Manual tuning OK

Programmes OK

Watch TV MENU Watch TV

LANGUAGES


Subtitles OFF


g g

29

Digital settings continued – software upgrade

SOFTWARE UPGRADE

Version 1.0

Auto upgrade ON

Search for New Software OK


This feature can be used to check the version of softwarecurrently installed.

Version

If Auto upgrade is selected the software willautomatically update as each version becomes available,provided the television is on or in standby. If the televisionis on, a screen prompt will appear showing the software

download taking place.

Auto Upgrade

1 From the FEATURE MENU press P or Q toselect Software upgrade. Press OK.

2 Press P or Q to select Version. Use S or R toselect. When the software has been updated therewill be a choice of two versions available.

SEARCHING FOR NEW SOFTWARE

Searching for a new software upgrade forthis TV.

Searching

EXIT Stop

NO UPGRADE AVAILABLE

! There is no upgrade available at this time.

Continue

1

2

In the SOFTWARE UPGRADE menu press P orQ to select Auto upgrade.

Use S or R to select ON or OFF.

If preferred, software upgrades can be searched formanually using Search for New Software.

Searching for new software

1 In the SOFTWARE UPGRADE menu press P orQ to select Search for New Software.

2 Press OK. The television will automatically startsearching for a software upgrade, the progress barwill move along the line.

If an upgrade is found the television willautomatically start downloading, if not a screenwill appear stating that an upgrade is unavailable.

SOFTWARE UPGRADE

Version 1.0

Auto upgrade OFF

Search for New Software OK


FEATURE MENU




Software Upgrade OK

Encrypted Programmes OFF


g g

30

PC settings – picture position, clock phase,sampling clock, reset

3

3 Use S or R to adjust until the picture clears.

In the SET UP menu press Q until PC Setting ishighlighted.

Press OK to select, then Q to highlight Clockphase.

Use S or R to adjust until the picture clears.

1

2

The Clock phase matches the PC signal with the LCDdisplay. Adjusting this can clear horizontal stripes and

picture blur.

Clock phase


Press OK to select, then Q to highlight Samplingclock.

1

2

Adjusting the Sampling clock alters the number of pulsesper scan, this will clear vertical lines on the screen.

Sampling clockPicture position

Connect the PC (as shown in the ‘Connecting a PC’section) and ensure that a picture is showing on thetelevision screen. The picture position may now be

adjusted to suit personal preference.

Press B to select PC, then select PC Settingfrom the SET UP menu.

1

Press OK. Press P and Q to select an option,then S or R to adjust the settings.

2

3 Press OK.


Press OK to select, then Q to highlight Reset.

1

2

To return to the original factory settings.

Reset


Country UK

AV connection OK

PC Setting OK


1/2PC Settings


Horizontal width – 5

Vertical position 0

Vertical height – 5

Clock phase 0

Sampling clock 0


1/2PC Settings


Horizontal width – 5

Vertical position 0

Vertical height – 5

Clock phase 0

Sampling clock 0


2/2PC Settings

Reset OK


g g


Country UK

Auto tuning OK

Manual tuning OK


AV connection OK


Input selection and AV connections

31

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6for a clear view of the back connection recommendations.

Most media recorders and decoders send a signalthrough the SCART lead to switch the television to thecorrect Input socket.

Alternatively press the external source selection buttonB until the picture from connected equipment is shown.

This button must be used to view equipment connectedusing the COMPONENT VIDEO INPUT (EXT3C).

An S in the display e.g.B2S (EXT 2S), indicates theinput is set for an S-Video signal.

Use the Input Selection if the television does not switchover automatically.

Input selection

1

This specifies the type of signal going into SCART 2 (EXT2)on the back of the television. Please refer to the

manufacturers instructions for the connected equipment.

In the SET UP menu press Q until AV connection is highlighted, then press OK.

With S or R select either AV or S-VIDEO as therequired input for EXT2.

If the colour is missing try the alternative setting.

INPUT signal selection

1

2

2

Press B to select B1, B2, B3(C) (EXT1-3),HDMI1, HDMI2 or PC.

HDMI™ displays equipment connected to InputHDMI on the back of the television. It is designedfor best performance with 1080i high definitionsignals.

PC displays a computer connected to InputRGB/PC on the back of the television.

To return to television mode press and hold Band then select DTV or ATV.

AV connection

PC/HDMI1 audio PC

HDMI1 audio Digital

EXT1 output DTV

EXT2 input S-VIDEO

EXT2 output DTV

Monitor (Audio) Fixed


This is a digital television which is integrated to allow theuse of both digital and analogue services. However,during the lifetime of this set it is very likely thatanalogue services will be switched off to allow for morenew digital services.

This ‘switch-off’ will happen in a number of phases,which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digitalservices can be viewed without disruption (see the 'Auto tuning' section).

Analogue switch-off

g g

AV connection

PC/HDMI1 audio PC

HDMI1 audio Digital

EXT1 output DTV

EXT2 input S-VIDEO

EXT2 output DTV



AV connection

PC/HDMI1 audio HDMI1

HDMI1 audio Digital

EXT1 output DTV

EXT2 input S-VIDEO

EXT2 output DTV




Country UK

Auto tuning OK

Manual tuning OK


AV connection OK



Country UK

Auto tuning OK

Manual tuning OK


AV connection OK


32

Input selection and AV connections continued


1

2

HDMI, the HDMI logo, and High-Definition MultimediaInterface are trademarks or registered trademarks of HDMILicensing, LLC.

HDMI1 audio

If the connected HDMI source does not support digitalaudio, plug the audio cable into PC/HDMI1 audio on the

back of the television (as shown in the ‘Connecting acomputer’ section), then use the HDMI1 audio settings.

In the AV connection menu press Q to highlightPC/HDMI1 audio and using R select HDMI1.

Then highlight HDMI1 audio and using S or Rselect Auto., Digital or Analogue.

If the sound is missing select an alternativesetting.

NOTE: HDMI1 supports digital and analoguesound, HDMI2 is digital sound only.

2

3

Highlight PC/HDMI1 audio then use to R selectthe PC option.

NOTE: Selecting the PC option will force HDMIinto digital audio.

In order to receive sound from a connected PC, plug theaudio cable into the back of the television (as shown in

‘Connecting a computer’ section), then use thePC/HDMI1 audio settings.

PC audio


1

g g

33

Analogue text services – setting up, general information, Auto and LIST modes

This television has a multi-page text memory, which takes a few moments to load. It offers two Modes ofviewing text – Auto will display Fastext, if available. LIST will store your four favourite pages.

If Fastext is available four coloured titles will appear atthe base of the screen.

To access one of the four given subjects, press therelevant coloured button on the remote control.

For further information on your particular text system(s),see the broadcast text index page or, consult your localToshiba dealer.

The sub-page you are viewing will be highlighted and, asthe television loads any additional sub-pages the colourof the numbers will change, indicating that these pageshave been loaded.

These sub-pages will remain available to view untilanother page is chosen or, in normal TV mode, thechannel is changed.

The 6/ /7 button:To view text services press 6/ /7. Press again tosuperimpose the text over a normal broadcast picture andagain to return to normal viewing. Programmes cannotbe changed until text is cancelled.

The first text page shown will be the initial page.

Any text page can be accessed by entering the 3 digitpage number using the numbered buttons, pressing thecoloured buttons or pressing Pf to advance to the nextpage and P e to go back to the previous page.

Sub-pagesIf there are sub-pages they will automatically load intomemory without changing the page on screen.

To access the sub-pages press X then use Pf and P eto view them. A bar with numbers will appear on the sideof the screen.

Navigating pages using Auto.

Text informationThe four coloured choices at the bottom of the screen arenumbers – 100, 200, 300 and 400, which have beenprogrammed into the television’s memory. To view thesepages press the relevant coloured buttons.

To change these stored pages press the relevant colouredbutton and enter the 3 digit number. This number willchange in the top left of the screen and in the colouredhighlight.

Press OK to store. The bars at the bottom of the screenwill flash white. Whenever OK is pressed all fourpage numbers showing at the bottom will be storedand the previous ones will be lost.

If OK is not pressed the selection will be forgotten whentext is cancelled.

Other pages may be viewed by entering the 3 digit pagenumber – but DO NOT press OK or these pages will bestored.

Navigating pages using LIST

Select Teletext from the FUNCTION menu.

With S or R choose Auto. or LIST then press EXIT.

The text character set will be automatically chosen by thelanguage setting in the SET UP menu.

Selecting modes

1

2


Panel lock Off

Auto format On

Blue screen On

Side Panel 1


g g

Press T to access the index/initial page. The onedisplayed is dependant on the broadcaster.

Remember to cancel text beforechanging channels – press the 6/ /7 button twice.

☛

34

Analogue text services – control buttons,Digital interactive services

Below is a guide to the functions of the remote control text buttons.

Enter the page number then press 8/9, a normalpicture will be displayed. The television will indicate whenthe page is present by displaying the page number at thetop of the screen. Press 6/ /7 to view the page.

To display news flashes:Select the news flash page for the chosen text service (see the index page of text service). Press8/9. Thenews flashes will be displayed as and when they arebroadcast. Press8/9again to cancel the display.

The news flash page must be cancelled beforechanging programmes.

To display the index/initial page:T

At times it is convenient to hold a page of text. Press qand q will appear in the top left of the screen. Thepage will be held on screen until the button is pressedagain.

To hold a wanted page:q

To discover the solutions on quiz and joke pages press ther button.

To reveal concealed text:r

Press 6/ /7 to display text. Press again tosuperimpose text over a normal broadcast picture. Pressagain to return to normal television viewing. Programmescannot be changed until this has been done.

To display a page of text:

To select a page whilst viewing anormal page:8/9

6/ /7

Press s once to enlarge the top half of the page, pressagain to enlarge the bottom half of the page. Press againto revert to normal size.

To enlarge the text display size:s

For use with Pf and P e to view sub-pages whenavailable.

To access sub-pages:X

The digital interactive services are the up-to-date way of viewing service information, usingcomputer-style formats, incorporating picturesand interactive views.

They offer high quality on-screen images with multi-colour photographic still images, advanced text andgraphics and are user-friendly. These services are free toanyone with a digital television, however, they are notavailable for all digital stations and are dependant on thebroadcaster.

Digital interactive services

Ensure that digital mode has been selected. Press TEXT, it may take a few moments to load.

To navigate the pages and use the pull-downmenus, use the coloured buttons and P, Q, S and R as directed.

Press TEXT again at any time to cancel.

1

2

3

g g

Below are the answers to some of the most common queries.For more information go to www.toshiba.co.uk

A Check the mains switch is on and check all mainsconnections.

Check the television is not in standby mode.

Why is there no sound or picture?Q

A Check the volume has not been turned down orthat sound mute has not been selected.

Why is there a picture but no sound?Q

A Check that Panel lock is not ON.

Why don’t the controls on the television work?Q

A Check all lead connections.

Why is there a good video picture but no sound?Q

A Make sure the VCR or DVD player is connected tothe television as shown on page 6, then select the

correct input by pressing B.

Why doesn’t the video/DVD being played showon screen?Q

A Check the correct input has been chosen, S-VIDEO or AV. See AV connections page.

Why is the VCR/DVD picture in black andwhite?Q

A When using an external source, for instance, apoor quality video tape, if there is little or no

colour, improvements may sometimes be achieved. Thecolour is factory set to Auto. to automatically display thebest colour system.

To check that you have the best colour:

There is a picture, but why is there little or nocolour?Q

With the external source playing, select Manualsetting from the SET UP menu.

With P or Q choose between Auto., PAL,SECAM, NTSC 4. 43 or 3. 58.

1

2

?For television

operation queries,please ring the

helpline…

Remember…

Questions and Answers

35

Select the Manual tuning menu. Highlight thestation and press OK, then press R to selectManual fine tuning.

Using P or Q adjust to get the best picture andsound. Press OK and then EXIT.

1

2

A Interference or a weak signal. Try a differenttelevision station. Manual fine tuning may help.

What else can cause a poor analogue picture?Q

A Check the side switch on the remote control is inTV mode.

Check the batteries aren’t dead or inserted incorrectly.

Why doesn’t the remote control work?Q

A Remove it by pressing .

Why is there a message permanently on thescreen?Q

Manual settingColour system: Auto.

EXT2 A V C R

OK StoreMENU Back EXIT Watch TV Manual tuning

Manual fine tuning

1 I A C 22 +2 B B C 1


i+

A The signal strength may be too strong. Set theAntenna Amplifier option in the SET UP menu

to Off.

Why is there picture and sound interference onall digital and analogue channels?Q

g g

A The programme is currently being broadcast withan English soundtrack only.

Why is the soundtrack in English when adifferent audio language has been selected?Q

36

Questions and Answers continued

A Good performance of text depends on a goodstrong broadcast signal. This normally requires a

roof or loft aerial. If the text is unreadable or garbled,check the aerial. Go to the main index page of the textservice and look for the User Guide. This will explain thebasic operation of text in some detail. If furtherinformation is needed on how to use text see the text section.

Why are there problems with analogue text?Q

A The Clock phase may need adjustment. Select PC Setting from the SET UP menu, highlight

Clock phase and adjust until the picture clears.

Why are there horizontal stripes and/or blurredimages on the screen when in PC mode?Q

A Check the Speaker option in the Sound menu isset to Off.

Why is there no sound from my connected sound equipment?Q

A The Sampling clock may need adjustment. SelectPC Setting from the SET UP menu, highlight

Sampling clock and adjust until the lines clear.

Why are there vertical stripes on the screen when in PC mode?Q

A The digital programme being viewed is notbroadcasting digital text. Try another digital

programme.

Why is there no digital text service?Q

A The channel has been selected in LockedProgrammes. (see 'Digital Settings' section).

Why is the digital channel locked?Q

A A Favourite list has been selected (see 'FavouriteProgrammes' section), set the feature to ALL PROGS

or change channels by using the number buttons.

Why can only certain digital channels beviewed?Q

A Lock Menu has been enabled (see 'ParentalControls' page).

Why are some of the menus locked?Q

A Use the Master PIN code of 1276, then change toa number of your choice. Ensure that no-one else

can use the Master PIN by removing the Owner’s Manual.

What can be done if the PIN number has beenforgotten?Q

A Analogue mode is selected. Press and hold B toselect DTV.

Why is the DTV main menu unavailable?Q

A Subtitles are not currently being transmitted by thebroadcaster.

Why when digital subtitles have been selectedare they not showing on screen?Q

A Your subscription needs upgrading. Contact yourservice provider.

Why are some of the digital subscriptionchannels unavailable?Q

g g

37

Questions and Answers continued

Cleaning the screen and cabinet…Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes orsolvents on the screen or cabinet as this may cause damage.

Disposal…The following information is only for EU-member states:The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

A Text has been selected whilst viewing an externalsource i.e. DVD or VCR. No text will appear on

screen or a box may appear stating no information isavailable. Select a broadcasting channel and press 6/ /7 to access.

Why are the four coloured text numbers visiblebut no text?Q

A Connect the source via a SCART lead and play.Select Manual setting from the SET UP menu.

Why are the colours wrong when an NTSCsource is played?Q

Set the Colour to Auto. and exit.

Go to the Picture settings menu and adjust the tint.

1

2

Manual settingColour system: Auto.

EXT2 A V C R


A When put into standby the television’s activestandby will automatically search all available

channels for upgrades, provided Auto upgrade is On.The time it takes to do this may vary.

Why does the GREEN Active Standby LEDsometimes take longer to go out?Q

A There are none broadcast or they have not yetloaded. Press the X button to access.

(See text section).

Why are there no analogue text sub-pages?Q

g g

38

Notes

For your own records

g g

39

Notes

For your own records

g g

Specifications and accessories

Broadcast systems/channelsPAL-I UHF UK21-UK69

PAL-B/G UHF E21-E69VHF E2-E12, S1-S41

SECAM-L UHF F21-F69VHF F1-F10, B-Q

SECAM-D/K UHF R21-R69VHF R1-R12

Video Input PAL, SECAM, NTSC 3.58/4.43

External connectionsEXT1 Input/Output 21-pin SCART RGB, A/V

Selectable output

EXT2 Input/Output 21-pin SCART A/V, S-videoSelectable output

EXT3 Input Phono jacks Y, PB/CB, PR/CRPhono jacks A/V

EXT3 Input (Side) Phono jack VideoPhono jacks Audio L + R

HDMI 1/2 Input HDMI connector

PC Input Mini D-sub 15-pin Analog RGB signal

PC/HDMI1 Audio Phono jacks Audio L + R

Audio Ouput Fixed/Variable Phono jacks Audio L + R

Toshiba Information Systems (U.K.) LimitedConsumer Products Division,

European Service Centre,Admiralty Way, Camberley,

Surrey, GU15 3DT, UK

Specification is subject to change without notice.

Originated by Kensa Creative Solutions, Saltash, Cornwall.

© Toshiba Information Systems (U.K.) Limited

All rights reserved.

Reproduction in whole or part without written permission is strictly prohibited.

Printed on recycled paper. 100% Chlorine free.

Stereo Nicam2 carrier system

Visible Screen Size 195cm(approx.)

Display 16:9

Sound output (at 10% distortion) Main 10W + 10W

Power consumption 305Was specified in EN60107-1 : 1997

Standby (approx.) <1W

Dimensions 80cm (H) 114cm (W) 36cm (D)(approx.) (Height dimension includes foot stand)

Weight (approx.) 47kg

Headphone socket 3.5mm stereo

Accessories Remote control2 batteries(AAA, IEC R03 1.5V)

47WLT66BVX1A00010000

g g

toshiba - ribbon · 2012-08-03 · for on/standby mode when using a toshiba vcr or dvd: pressm...

Documents