tornado air horn installation instructions · 2017-11-17 · tornado™ air horn installation...

1
TornadoAir Horn Installation Instructions We thank you for purchasing the TornadoAir Horn! Our prod- ucts utilize the latest technology and high quality components to ensure you the most reliable service. We offer one of the best warranty programs in the industry and we back our products with excellent customer support, if you have questions before or during installation of this product please call Custom Dynam- ics® at 1(800) 382-1388. Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST 11-2017 Package Contents: - Dual Tone Marco Air Horn (116900190-B) - Universal M8 Mounting Bolt - 12V 30A Relay - Phillips screw Optional: UNV-HARNESS Universal Air Horn Wiring Harness (Sold Separately). The wiring kit isolates the TornadoAir Horn electrical from any of the electrical compo- nents. We only use the on/off aspect of the stock horn button, which turns the Torna- dorelay on/off. This wiring kit also provides a more direct power source to the com- pressor and insures you have the loudest horn in the motorcycle industry. Warning: Horn must be protected by a 25A fuse. Failure to do so may result in dam- age, injury and void Warranty. Warning: To prevent possible electrical shock, disconnect the negative Battery termi- nal before installing this product. Fits: Universal 12v System Requires 4.5" W, 5.0" H, 3.0" D Clearance Wiring needed not included Relay contact 87: Connects to the + post of the Tornado Relay contact 86: Connects to +12v from horn button Relay contact 85: Connects to Ground and the - post of the Tornado Relay contact 30: Connects to in-line fuse of + post of Battery Mounting 1. Mount horn to a suitable location using the supplied mounting bolt. 2. Mount relay to horn using supplied Phillips screw or mount near battery. See picture below. 3. Wire the horn and relay according to the wiring diagram below and the Relay Wiring to the right. 4. Test operation of horn before riding. ATTENTION Please read all Informaon below before Installaon TornadoAir Horn + Fuse + - Relay 87 86 85 30 +12v from Bikes horn buon 25A - Baery

Upload: others

Post on 10-Jun-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Tornado Air Horn Installation Instructions · 2017-11-17 · Tornado™ Air Horn Installation Instructions We thank you for purchasing the Tornado™ Air Horn! Our prod-ucts utilize

Tornado™ Air Horn Installation Instructions

We thank you for purchasing the Tornado™ Air Horn! Our prod-

ucts utilize the latest technology and high quality components

to ensure you the most reliable service. We offer one of the best

warranty programs in the industry and we back our products

with excellent customer support, if you have questions before

or during installation of this product please call Custom Dynam-

ics® at 1(800) 382-1388.

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

11-2017

Package Contents:

- Dual Tone Marco Air Horn (116900190-B)

- Universal M8 Mounting Bolt

- 12V 30A Relay

- Phillips screw

Optional: UNV-HARNESS Universal Air Horn Wiring Harness (Sold Separately). The

wiring kit isolates the Tornado™ Air Horn electrical from any of the electrical compo-

nents. We only use the on/off aspect of the stock horn button, which turns the Torna-

do™ relay on/off. This wiring kit also provides a more direct power source to the com-

pressor and insures you have the loudest horn in the motorcycle industry.

Warning: Horn must be protected by a 25A fuse. Failure to do so may result in dam-

age, injury and void Warranty.

Warning: To prevent possible electrical shock, disconnect the negative Battery termi-

nal before installing this product.

Fits: Universal 12v System

Requires 4.5" W, 5.0" H, 3.0" D Clearance

Wiring needed not included

Relay contact 87: Connects to the + post of the Tornado

Relay contact 86: Connects to +12v from horn button

Relay contact 85: Connects to Ground and the - post of the Tornado

Relay contact 30: Connects to in-line fuse of + post of Battery

Mounting

1. Mount horn to a suitable location using the supplied

mounting bolt.

2. Mount relay to horn using supplied Phillips screw or

mount near battery. See picture below.

3. Wire the horn and relay according to the wiring diagram

below and the Relay Wiring to the right.

4. Test operation of horn before riding.

ATTENTION Please read all Information below before Installation

Tornado™

Air Horn

+

Fuse

+

-

Relay

87

86 85

30

+12v from Bike’s horn button

25A

- Battery