OPERATION MANUAL

1

TOPS DIGITAL VIDEO RECORDER

TOPS DVRTOPS DVROperation Manual

OPERATION MANUAL

2

WARNING & CAUTION

This symbol indicates that dangerous voltage constituting

a risk of electric shock is present within this unit

This symbol indicates that it may cause injury, damage and

other harmful results

WARNING

CAUTION

All cautions and warnings on this manual should be noted failure to heed this warning & caution will result in serious damage

OPERATION MANUAL

3

Verify that the voltage is set correctly for user location

Avoid direct sunlight, heating equipment and electric equipment

(danger of fire)

Be sure that power is plugged in securely

(may cause fire if the connection is unstable)

Do not touch the cord with wet handit may cause severe electric shock

Do not pull on the power cord

(may cause fire or electric shock if cord is damaged)

Do not disassemble or reconstruct product

(may cause fire, electric shock or defects)

When in notice of smoke or weird smell, please stop usage and pull out the

power plug and contact the service center

(continued usage may cause fire or electric shock)

Do not place or drop metallic objects (coins, hair pin, metal) or easily

flammable products (matches, paper) in the ventilation of the product

(may cause fire or electric shock)

Do not place any liquid filled objects on the product

(may cause fire, electric shock or other injuries)

Do not install product in areas of high humidity, dust or is soot-covered

(may cause fire, electric shock or defects)

WARNINGS

OPERATION MANUAL

4

To product use hour it uses the all the member cable where becomes the ground connection it wishes

Before operation, become familiar with all the special features and warning associated with this equipment and read this manual carefully

Avoid installation in cold areas

This product is designed to operate under max 40℃

Single phase power supply operation is not recommended to prevent a power supply failure ups is strongly recommended

Back up the important data

When cleaning the product, do not use water, but use a dry cloth to gently wipe the product

Avoid installation in uneven areas

(may cause defect in product)

Do not place heavy objects on product

(may cause injury)

Avoid areas of magnetic fields and severe vibration

(may cause defect in product)

Do not drop the product or cause sudden impacts

This product is heavy be careful when moving this product

CAUTIONS

OPERATION MANUAL

5

INSTALLATION INSTRUCTION

1) This device designed to operate under max 40℃ when you install this device in the rack, please consider the max ambient temperature please install this device proper ambient temperature of all part

2) Caution : when you install this device in the rack, the operating ambient temperature may be greater than room ambient please consider this condition and simulate the max temperature and install in an environment compatible temperature

3) Reduced air flow : installation of this device in a rack should be such that the amount of air flow required for safe operation of this device is not compromised please provide enough space to get the proper air flow

4) Mechanical loading – mounting of this device in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading

5) Circuit overloading : please read the rating in the nameplate and consider appropriate power supply and supply wiring

6) When you are using like a power strips except direct connections to the branch circuit, please make sure to connect reliable earthing maintained

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense

Connecting Power source to System Using 110V power source Make sure power select switch set to 115V(110V use)

Using 220V power source Make sure power select switch set to 230V(220V use)

NOTICE: For U S A and Canada regions; use only UL listed CSA labeled detachable power cord, 3-conductor, 18 AWG, SVT or SJT type, plug rounding type parallel blade, cord connector body-IEC 320 style to mate with appliance inlet on product

IMPORTANT The only way to disconnect power completely is to unplug the power cord Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when you need to

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS

WARNING

This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment

OPERATION MANUAL

6

4. CONFIGRATION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

4.1 Camera/Sensor ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

4.2 Schedule ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

4.3 Sensor ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

4.4 Password ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

4.5 Backup ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

4.6 Ne two rk ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

243. SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

253.1 Search ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

273.2 Panorama Search ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

283 . 3 S a v e ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ ㅡ

142. SURVEILLANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

152.1 Surveillance ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

182.2 Preset Setting ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

182.3 1CH Sea rch ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

202 .4 Backup ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

222.5 How to Log In/Out ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

232.6 Password/Rotation ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

111.3 Rear Layout ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

101.2 Front Layout ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

91.1 Product Contents ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

81. INSTALLATION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

TABLE OF CONTENTS

OPERATION MANUAL

7

539. CLIENT PAN/TILTㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

549.1 Sea rchㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

549.2 Presetㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

538. CLIENT SEARCHㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

548.1 Sea rchㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

548.2 Detail Searchㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

517. CLIENT SURVEILLANCEㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

527.1 Client Surveillanceㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

486. CLIENT CONNECTIONㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

496.1 IP Connec t ionㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

506.2 PDNS Connectionㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

986. SUPPLEMENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

475.2 PAN/TILT Installationㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

465.1 Sensor/ D/O Installationㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

455. SUPPLEMNET ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

OPERATION MANUAL

8

1. INSTALLATION

1.1 Product Contents

1.2 Front Layout

1.3 Rear Layout

OPERATION MANUAL

9

DVR Power cable Loop CablesOnly MP8916

MouseKeyboard

Program CD Windows OS CD

Manuals

Handle, Screws

Key

1.1 PRODCUT CONTENTS

Note:The above contents will be changeable with different models

OPERATION MANUAL

10

1.2 FRONT LAYOUT

MP 5909/6916/8916

Power Switch

Power LED, HDD LED

Lock

USB

Expansion guide for HDD, CD-RW, etc

OPERATION MANUAL

11

TOPS5909/6916/8916

1.2 FRONT LAYOUT

The system layout may be different from each other model

Speaker

Power LED, HDD LED

3 5 inch floppy disk drive

Lock

Power switch

Expansion guide for HDD, CD-RW, etc

OPERATION MANUAL

12

MP5216

1.2 FRONT LAYOUT

The system layout may be different from each other model

Expansion guide for HDD, CD-RW, etc

Power switch

USB Port

HDD LED

Power LED

OPERATION MANUAL

13

1.3 REAR LAYOUT

MP6916/8916

VGA Out

LAN

Printer Port

Audio Out(Green)

Mouse/Keyboard

USB Port

Verify that the voltage is set correctly for use location.

! Warning

AC Power Inlet

115/230 VAC switch

Audio In

Alarm Out (Option)

Sensor In (Option)

Camera In/MUX Out/SPOT Out

OPERATION MANUAL

14

1.3 REAR LAYOUT

MP5916/5909

VGA Out

LAN

Printer Port

Audio Out(Green)

Mouse/Keyboard

USB Port

경고

AC Power Inlet

115/230 VAC switch

Alarm Out (Option)

Audio In

Camera In/MUX Out/SPOT Out

Sensor In (Option)

PAN/TILT Port

Verify that the voltage is set correctly for use location.

! Warning

OPERATION MANUAL

15

MP5909/6916/8916

1.3 REAR LAYOUT

AC power inlet

115/230 VAC switch

Verify that the voltage is set correctly for user location

! WARNING

LPT1 printer port

Pan/Tilt port 1,2

LAN

Video outputTV out 1,2

Sensor Digital out

Audio output

Camera in

Mouse Keyboard

USB port

TOPS 8916 Audio input Camera output

TOPS 5916 TOPS 6916 Audio input

OPERATION MANUAL

16

2.1 Surveillance

2.2 Preset Setting

2.3 1CH Search

2.4 BACKUP

2.5 How to Log In/Out

2.6 P/W & Rotation

2. SURVEILLANCE

OPERATION MANUAL

17

2.1 SURVEILLANCE

① Surveillance Mode ② Search Mode③ Setup Mode④ Backup Mode ⑤ Password / Rotation ⑥ User Mode (Log In /Out)⑦ Shut Down

Main Mode

NOTE:

Diskette BACKUP and PRINT buttons are only available on SEARCH MODE.

① Main Menu ② Live View③ Camera Controller④ Camera Layout ⑤ Digital Zoom ⑥ Volume Control⑦ 1 CH Pop Up Search⑧ Log In User⑨ Map Search

④

⑤

⑥

⑦

① ② ③

Main Menu

①

③

②

④

⑤

⑧

⑥

⑨

⑦

OPERATION MANUAL

18

Screen Information Channel Information

②

③

①

① Camera Name ② Recording Status

NOR – Normal RecordingMOT – Motion RecordingSEN – Sensor RecordingMOT+SEN – Motion + SensorA – Audio Recording

③ Camera Image

Camera View Layout

① 1 CH ② 4 CH③ 9 CH④ 16 CH ⑤ 1 Main + 7 Sub CH ⑥ 1 Main + 12 Sub CH⑦ 2 Main + 8 Sub CH⑧ 3 Main + 4 Sub CH⑨ Rotation⑩ User Selection⑪ Pop UP ON/OFF⑫ Full Screen

① Camera Group ② Camera No.1③ Camera Name④ Camera Resolution⑤ Camera Protocol ⑥ Sensor Group⑦ D/O Group (Alarm Out)⑧ Audio Group⑨ External Monitor

NOTE:Sub menu is available when right mouse click each CH like “External Monitor” or “ON/ OFF”

②

⑪

⑧

⑫

① ③ ④

⑦

⑩

⑤

⑨

⑥

⑨

①②③④⑤

⑥⑦⑧

OPERATION MANUAL

19

Digital Zoom

PAN/TILT

① Digital Zoom Box (RED)② Panning View ③ Digital Zoom Control Bar

MOTMOT

①

②

③

Digital Zoom is only available at 1 CH layout.

①

②

③

⑨

⑩

⑤

⑥

⑦

⑧

⑪④

⑬

⑭

⑮

16

⑫

① Zoom ② Focus③ Iris④ Preset No.⑤ Preset ⑥ P-Run⑦ Light⑧ Mouse Control Speed⑨ PTZ Direction⑩ Protocol Information⑪ Preset/Pattern Save⑫ A-Run: Auto moving to the Position⑬ Pattern: Auto moving according to

Pattern Set⑭ Power: Turn On/Off Camera⑮ Wiper

Camera No.16

User Selection

① Click “USER SELECTION” button② Drag a cam from “CAMERA

INFORMATION” and drop it on the “LIVE VIEW”

Note:The below is the example of “UserSelection”.

Cam1. Cam2.

Cam3. Cam4.

Cam2. Cam1.

Cam4. Cam3.

OPERATION MANUAL

20

① Select CH No.② Tick “Mouse Control”③ Adjust “Speed”④ Move the direction with mouse

How to set Preset

Note:PTZ Control is only available at 1 CH layout.PTZ MENU is displayed when PTZ camera is selected.

① Select CH No.② Select “Preset”③ Tick “Preset Save”④ Move the camera direction⑤ Select a “Preset No.” to save⑥ Click “P-Run’ to move the saved Preset

How to delete Preset

① Select CH No.② Select “Preset”③ Select a “Preset No.” to delete

How to set Pattern

① Select CH No.② Select “Pattern”③ Tick “Pattern Save”④ Move the camera direction⑤ Deselect “Pattern Save”⑥ Moving between ③ and ⑤

How to use Mouse Control

Note:1 CH Search is available at Surveillance Mode

① ② ③

① 1CH Search② Smart Search (Object Search)③ Map Search

① ② ③

④

⑤

⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫

① CH No. ② Rec. Time③ Record Type④ Close 1 CH Search⑤ Recorded Image ⑥ First Image⑦ Previous Image⑧ Reverse⑨ Playback⑩ Stop⑪ Next Image⑫ Last Image

1CH Search

2.2 PRESET SETTING 2.3 1CH SEARCH

OPERATION MANUAL

21

Playback

Smart Search

① Detection Area ② Sensitivity③ Full Screen Detection④ Specific Area⑤ Move: Move the Area ⑥ Reset Area⑦ Set Area⑧ Playback⑨ Reverse⑩ Stop⑪ Confirm the time and Close⑫ Close Smart Search

⑦ ⑧

① ② ③

④

⑥

⑨

⑤

① Play Control② Playback Speed③ Audio Volume④ Year/Month/Hour/Min/CH Search⑤ 24 Hour Map ⑥ 1 Hour map⑦ Hide Thumbnail Map⑧ Show Thumbnail Map⑨ Show image every 5 minutes for 1 hour

①

②

④⑤⑥

⑦⑧⑨⑩

③

⑫⑪

OPERATION MANUAL

22

Calendar Search

Smart Search

① Select 1 CH Layout ② Select Smart Search③ Click “ADD”④ Set Area on the screen⑤ Adjust “Sensitivity”⑥ Select “Key Image Set”⑦ Select “Next Play”

① Calendar (Year/Month/Date/Time)② Detailed Map③ Previous Time④ Next Time⑤ Record Status

NOR-Red, MOT-Blue, SEN-Green⑥ Selection Line⑦ Close⑧ Playback the selected time⑨ Detailed view for record map

① Calendar ② Camera No.③ List recorded data④ Selected recorded data⑤ Reset ⑥ Free space of Media⑦ Total space of Media⑧ Format⑨ Eject⑩ Close⑪ Hide⑫ Start / Stop

How to Backup

① Select “Backup” Mode ② Insert Media③ Select the date④ Select the drive⑤ Select Camera No.⑥ Select data⑦ Press “Start”

NOTE:Format must be done before BACKUP.

2.4 BACKUP (MP SERIES)

② ③ ④①

⑦

⑤

⑥

⑧

②

⑤

⑧

⑥

③

⑦

⑨

NOTE:Tick “Viewer Copy” for backup viewer save with backup data.

④

⑩

⑪⑫

①

OPERATION MANUAL

23

① Calendar ② Data Map③ Recorded Data (Blue)④ Selected Size⑤ Reset⑥ Free Space of Media⑦ Total space of Media⑧ Format⑨ Eject⑩ Backup Status⑪ Close⑫ Hide⑬ Start/Stop⑭ Backup Viewer Copy

NOTE:Format must be done before BACKUP.

Backup (TOPS Series) NOTE:The backup time can be longer than the selected time.Ex) If user choose the backup time from 7:00 to 8:00, DVR will backup the data 6:45 to 8:45. It’s because DVR backup the data on 64MB DB base.

How to Backup

① Select “Backup” Mode ② Insert Media③ Select the date④ Select the drive⑤ Select data⑥ Press “Start”

NOTE:Tick “Viewer Copy” for backup viewer save with backup data.

②

①

⑤

⑧

⑩

⑫

⑥

③

④

⑦

⑨

⑭

⑬

⑪

DB file of DVR

8:45

64MB

6:45 7:00 8:00

DB file of DVR

8:45

64MB

6:45 7:00 8:00

64MB

6:45 7:00 8:00

OPERATION MANUAL

24

2.5 HOW TO LOG IN / OUT

① Go to User Mode ② Select user name③ Type Password ④ Press “OK”

2. Select User name.3. Type Password.

Default P/W is “0”.4. Press “OK”.

1. Go to User Mode.Click the User button in red.

2. Type Password.Default P/W is “0”.

3. Press “OK”.

① Go to User Mode ② Type Password ③ Press “OK”

1. Go to User Mode.Click the User button in red.

How to Log In How to Log Out

OPERATION MANUAL

25

2.6 PASSWORD / ROTATION

① Go to PASWORD / ROTATE Mode ② Select “Change Password”③ Type Password

Default P/W is “0”.④ Press “OK”

2. Select “Change Password”.

1. Go to PASSWORD Mode.Click the PASSWORD button in red.

① Go to PASSWORD / ROTATE Mode ② Select “Layout Rotate Time”③ Select the duration time

How to change P/W How to set Rotation Time

3. Change the Password.

① Go to PASSWORD / ROTATE Mode ② Select “Event Popup Time”③ Select the duration time

How to set Event Pop up Time

① Go to PASSWORD / ROTATE Mode ② Select “External Monitor”③ Select “Fixed”, “Spot” and

“Event Spot” mode

How to set External Monitor

① Go to PASSWORD / ROTATE Mode ② Select “External Monitor Rotation

Time”③ Select the time

How to set External Monitor Rotation Time

Note:Function in blue is not available with TOPS Series.

OPERATION MANUAL

26

3.1 Search

3.2 Panorama Search

3.3 AVI, JPG, BMP Save

3. SEARCH

OPERATION MANUAL

27

3.1 SEARCH

① Camera Name ② Recorded Status③ Playback Image④ Recorded Time

Main Mode Search Screen

① Search Mode ② Search Screen③ Camera Information④ Panorama Search Information⑤ Camera Layout⑥ Map & Thumbnail View

User Selection

① Click “USER SELECTION” button② Drag a cam from “CAMERA

INFORMATION” and drop it on the “SEARCH SCREEN”

Note:The search layout will be changeable. The below is the example of “USER SELECTION”.

①

③

④

②

Camera Layout

① User Layout Name② Save User Layout③ Delete User Layout④ 1CH⑤ 4CH ⑥ 9CH⑦ 16CH⑧ User Selection

⑦

①

②

④

⑤

⑥③

⑧

Cam1. Cam2.

Cam3. Cam4.

Cam2. Cam1.

Cam4. Cam3.

①

③

⑤

⑥

④

②②

OPERATION MANUAL

28

Playback

⑦ ⑧

① ② ③

④

⑥

⑨

⑤

① Play Control② Playback Speed③ Audio Volume④ Year/Month/Hour/Min/CH Search⑤ 24 Hour Map ⑥ 1 Hour map⑦ Hide Thumbnail Map⑧ Show Thumbnail Map⑨ Show image every 5 minutes for 1 Hour

OPERATION MANUAL

29

3.2 PANORAMA SEARCH

①

②

③

④

①

① 1CH Search Screen ② Panorama Screen③ Playing Screen④ Time/Camera Selection

① Selected Screen

Note:Before saving AVI, JPG, BMP, user should select the images like the below.

OPERATION MANUAL

30

3.3 AVI, JPG, BMP Save

① Print ② Printer Setup③ Previous Print Image④ Next Print Image⑤ Layout 1X2⑥ Layout 2X4 ⑦ Layout 4X8⑧ Close ⑨ Camera Selection⑩ Preview⑪ Page No.

① AVI Save② Selected Time③ Camera No.④ AVI Duration⑤ Audio Record ⑥ Drive Selection⑦ File Name⑧ Format Media⑨ Save⑩ Cancel

①

②

⑨

⑤

③

⑥

⑩

④

⑦

⑧

①

⑪

② ③ ④ ⑤ ⑥ ⑦

⑩

⑨

⑧

NOTE:Printer Drive should be installed before printing the image.And make sure that printer is connected to DVR and power is ON.

① BMP Save② JPG Save③ Selected Time④ Camera No.⑤ Drive Selection ⑥ File Name⑦ Count No.⑧ Format Media⑨ Save⑩ Cancel

Print

①

③

⑧

②

⑤

④

⑥

⑨ ⑩

⑦

OPERATION MANUAL

31

Camera/Sensor

Schedule

Sensor

Password

Backup

Network

4. CONFIGURATION

OPERATION MANUAL

32

4. SETUP (MPII SERIES)

4.1 CAMERA /SENSOR Motion Area

① NTSC/PAL② Resolution (CIF/HALF VGA/VGA)③ Camera On/Off④ Audio On/Of⑤ PTZ Protocol ⑥ PTZ Address⑦ Camera Name⑧ Motion Setting Area⑨ Motion, PTZ, Video (Color)

① User Setting Area② User Defined – Small Area

Full Region –Full Area ③ Display Detection Box

Reduce Sensitivity at night④ Motion-Alarm Setting⑤ Apply to all cameras

④

⑤

②

③

①

PTZ

③

①

②

① Direction, Zoom, FocusPreset Duration

② Preset ID③ Preset Save, Preset Delete.

Delete all Presets

⑧

⑤

⑨

⑥

④

②

③

①

⑦

OPERATION MANUAL

33

4.2 SCHEDULE Schedule Group Setting

① Quality (5 Steps)② Recording Speed ③ Post Recording (10Sec~5Min)④ Pre Recording(4 Steps)⑤ Recording Type Selection⑥ Weekday, Weekend, Holiday⑦ Schedule Setting Area⑧ Default

Clear –Delete a camera scheduleAll Cam –Apply a schedule to all CamerasAll Day –Apply a schedule to all days

⑨ Add Holiday

③

①

④

②

⑤ ⑥

Holiday

① Previous/Next Month② Add, Monthly Add, Yearly Add ③ Added Holiday List Box④ Delete(1 time), Delete all holidays⑤ Save & Exit⑥ Exit

① Click “Weekend”, “Weekday”, “Holiday”for group setting.

② Select days for the group of weekday.

64

32

16

8

4

2

96 64 Step 5

48 32 Step 4

24 16 Step 3

4832 16 Step 5

2416 8Step 4

128 4Step 3

192

Long

6

12

MiddleShort

LongMiddleShort

128

8

3

6

96

4

Duration

FPS

Step 1 (MAX)

Step 2

240FPS (Model 6916) Duration-Sec.

6432Step 6 (MIN)

480FPS (Model 8916) Duration-Sec.

Step 6 (MIN)

4 2 Step 2

2 1 Step 1 (MAX)

Duration

FPS

PRE Duration Information

①

②

③④

⑤

⑥

⑦

⑧

OPERATION MANUAL

34

4.3 SENSOR Alarm

① Sensor Name② Linked Camera Selection ③ Linked Alarm Selection④ Sensor Type (N/C, N/O)⑤ Default⑥ Reset

① Alarm Name② Alarm Type (N/C, N/O) ③ Alarm Duration

(1 time, 1Sec~10Min, Continue)④ Default⑤ Reset

④

③

①

②

Network

⑥

①②

③

⑤

④

① DVR Name② Network Port ③ Network Type (TCP/IP,MODEM)④ DHCP/IP Setting⑤ E-mail list for emergency transmission.⑥ SMTP Server

⑤

④

②

①③

How to set PDNS

① Tick “Use PDNS”② Type “DVR ID”③ Press “Register DVR ID”

Note:If the DVR ID is already used on otherDVR, it will show warning message.

OPERATION MANUAL

35

① User Selection② Password Configuration ③ Password No.④ Configuration, Backup, Search, PTZ,

Camera Selection

Password Change

① Choose user② Input P/W ③ Click “Password Modify” button④ Input New P/W and confirm the P/W⑤ E-mail list for emergency transmission.⑥ SMTP Server

User Authority Change

① Choose user② Change “Authority” like Configuration,

Backup, Search, PTZ, Camera③ Save & Exit

⑤

⑥

⑦

①

②

③

④

① System Beep② S/W Version③ CPU Usage Status④ Backup Drive Setting⑤ Event Transmission Setting

(Motion, Sensor, No Video Signal)⑥ IP Address⑦ DATE/TIME Format

①

④

③

②

ArchiveUser/Password

① Go to Backup Drive Setting② Choose a drive

Ex) D:, E:, F:③ Change the drive for Backup drive④ Save & Exit

Backup Drive Setting

OPERATION MANUAL

36

Configuration Setting

① Windows Explorer② Go to DVR Mode ③ Configuration Setting

(Color, Date, Network, Printer)④ DVR Shut down

SHELL MODE

① Icon Name ② Windows Task Manager③ Save Configuration Files④ Load Configuration Files⑤ Register User⑥ Upgrade DVR⑦ Program Version⑧ Uninstall DVR Program⑨ Network Setting⑩ Printer Setting⑪ DATE/TIME Setting⑫ DISK Management

①

②

③

④⑤

⑥

⑦⑧

⑪

⑫

①

②

③

④

⑨

⑩

OPERATION MANUAL

37

4. SETUP (MP SERIES)

Camera /Sensor Motion Area

① NTSC/PAL② Resolution (CIF/HALF VGA/VGA)③ Camera On/Off④ Audio On/Off⑤ PTZ Protocol ⑥ PTZ Address⑦ Camera Name⑧ Motion Setting Area⑨ Motion, PTZ (Event Tracking),

Video (Color) ① User Setting Area② User Defined – Small Area

Full Region –Full Area ③ Display Detection Box

Reduce Sensitivity at night④ Motion-Alarm Setting⑤ Apply to all cameras

④

⑤

②

③

①

PTZ

③

①

②

① Direction, Zoom, FocusPreset Duration

② Preset ID③ Preset Save, Preset Delete.

Delete all Presets

⑧

②

③

①

⑦

⑤

⑨

⑥

④

OPERATION MANUAL

38

Schedule Schedule Group Setting

① Quality (5 Steps)② Recording Speed ③ Post Recording (10Sec~5Min)④ Pre Recording(4 Steps)⑤ Recording Type Selection⑥ Weekday, Weekend, Holiday⑦ Schedule Setting Area⑧ Default

Clear –Delete a camera scheduleAll Cam –Apply a schedule to all CamerasAll Day –Apply a schedule to all days

⑨ Add Holiday

③

①

④

②

⑤ ⑥

Holiday

① Previous/Next Month② Add, Monthly Add, Yearly Add ③ Added Holiday List Box④ Delete(1 time), Delete all holidays⑤ Save & Exit⑥ Exit

①

③

④

②

⑨

⑥

⑦

⑤

⑧

① Click “Weekend”, “Weekday”, “Holiday”for group setting.

② Select days for the group of weekday.

64

32

16

8

4

2

96 64 Step 5

48 32 Step 4

24 16 Step 3

4832 16 Step 5

2416 8Step 4

128 4Step 3

192

Long

6

12

MiddleShort

LongMiddleShort

128

8

3

6

96

4

Duration

FPS

Step 1 (MAX)

Step 2

240FPS (Model 6916) Duration-Sec.

6432Step 6 (MIN)

480FPS (Model 8916) Duration-Sec.

Step 6 (MIN)

4 2 Step 2

2 1 Step 1 (MAX)

Duration

FPS

Pre Duration Information

OPERATION MANUAL

39

Sensor Alarm

① Sensor Name② Linked Camera Selection ③ Linked Alarm Selection④ Sensor Type (N/C, N/O)⑤ Default⑥ Reset

① Alarm Name② Alarm Type (N/C, N/O) ③ Alarm Duration

(1 time, 1Sec~10Min, Continue)④ Default⑤ Reset

④

③

①

②

Network

⑥

①

②③

⑤

④

① DVR Name② Network Port ③ Network Type (TCP/IP,MODEM)④ DHCP/IP Setting⑤ E-mail list for emergency transmission.⑥ SMTP Server

⑤

④

②

①③

OPERATION MANUAL

40

① User Selection② Password Configuration ③ Password No.④ Configuration, Backup, Search, PTZ,

Camera Selection

Password Change

① Choose user② Input P/W ③ Click “Password Modify” button④ Input New P/W and confirm the P/W⑤ E-mail list for emergency transmission.⑥ SMTP Server

User Authority Change

① Choose user② Change “Authority” like Configuration,

Backup, Search, PTZ, Camera③ Save & Exit

⑤

⑥

⑦

①

②

③

④

① System Beep② S/W Version③ CPU Usage Status④ Event Transmission Setting

(Motion, Sensor, No Video Signal)⑤ IP Address⑥ Backup Drive Setting⑦ DATE/TIME Format

①

④

③

②

BackupUser/Password

① Go to Backup Drive Setting② Choose a drive

Ex) D:, E:, F:③ Change the drive for Backup drive④ Save & Exit

Backup Drive Setting

OPERATION MANUAL

41

Configuration Setting

① Windows Explorer② Go to DVR Mode ③ Configuration Setting

(Color, Date, Network, Printer)④ DVR Shut down

SHELLL MODE

① Icon Name ② Windows Task Manager③ Save Configuration Files④ Load Configuration Files⑤ Register User⑥ Upgrade DVR⑦ Program Version⑧ Uninstall DVR Program⑨ Network Setting⑩ Printer Setting⑪ DATE/TIME Setting⑫ DISK Management

①

②

③

④⑤

⑥

⑦⑧

⑪

⑫

①

②

③

④

⑨

⑩

OPERATION MANUAL

42

SETUP (TOPS SERIES)

Camera /Sensor

① NTSC/PAL② Camera Name③ PTZ Protocol & Address

Camera On/Off, Audio On/Off,Event Pop up, Audio GainResolution:TOPS 8916 : 320 x 240, 640 x 480 TOPS 5916/5216/6916NTSC: 352 x 240, 720 x 240, 704 x 480PAL: 352 x 280, 720 x 280, 704 x 560

④ Apply to all cameras⑤ Linked Alarm & DO (Alarm Out)⑥ Sensor & DO Type⑦ Beep Setting

① User setting area② User Defined – Small area

Full Region –Full area Sensitivity

③ Apply to all cameras

①

PTZ⑦

①

⑤

⑥

②

③

④

③

②

Motion Area

②

①

③

④

⑤

① D/O(ALARM OUT), Sensor② Apply to all cameras③ Preset No.④ Preset Setting⑤ Save the Setting

OPERATION MANUAL

43

⑥

⑦

⑤

①

③

④

②

Schedule (Record) Schedule Group Setting

① Camera List② Reset, Apply to All, All Days ③ Recording Mode④ Holiday Setting⑤ Schedule Setting⑥ Auto Schedule ⑦ Image Quality, Speed, Compression

Holiday

① Previous/Next Month② Add, Monthly Add, Yearly Add ③ Added Holiday List Box④ Delete(1 time), Delete all holidays⑤ Save & Exit⑥ Exit

SETUP (TOPS SERIES)

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨

① Camera Name ② Image Quality③ Normal Record Speed④ Motion Record Speed⑤ Sensor Record Speed⑥ Pre-Alarm

(Recording frame for Pre-Duration)⑦ Pre-Duration⑧ Post-Duration⑨ Compression Mode

Alarm Schedule

⑥

①

②

③

④

⑤

① D/O List (Alarm Out)② Recording Mode③ Reset, Apply to All, All Days④ Auto Schedule⑤ Auto D/O OFF ⑥ D/O Schedule Area

③

①

④

②

⑤ ⑥

OPERATION MANUAL

44

SETUP (TOPS SERIES)

① Camera No. ② Motion for Network Transmission③ Sensor for Network Transmission④ Set Transmission (Enable/Disable)⑤ IP Address -Type IP address of PC to

have transmission ⑥ E-mail Address –Type E-mail address

to have transmission⑦ Add E-mail Address⑧ E-mail List Window⑨ Delete the list⑩ SMTP Server

Note:Emergency program must be installed atthe PC to receive the transmission

①

②

⑥

③

⑤

④

⑦

⑧

⑨

① Site Name② Port No. (0 is default)③ Network Connection Type④ DNS Server⑤ DHCP ON/OFF ⑥ IP Setting⑦ PDNS ON/OFF⑧ Type the DVR ID for PDNS recognition⑨ PDNS Server IP Address

Note:We recommend to use the default IP address 61.109.175.2 that TOPS provides.

⑧

① ② ③

⑥⑦

④

⑩

⑤

⑨

Network

OPERATION MANUAL

45

① Registered User Name② Available Functions ③ PASSWROD Input Window④ Choose Functions for each User⑤ Add User⑥ Delete user

Password Change

① Choose user② Input P/W ③ Click “Password Modify” button④ Input New P/W and confirm the P/W⑤ E-mail LIST for emergency transmission⑥ SMTP SERVER

User Authority Change

① Choose user② Change “Authority”

CONFIGURATION, BACKUP, SEARCH, PTZ, CAMERA

③ SAVE & EXIT

① Show HDD,CD/DVD on DVR② Total Capacity③ Free Capacity④ Set Data/Backup Drive⑤ Date Format

SETUP (TOPS SERIES)

① ②

⑤ ⑥

④

③

①

② ④③

⑤

User/Password Backup

① Go to Backup Device/HDD Setting② Choose a drive

Ex) D:, E:, F:③ Press “Data Drive”for Backup drive④ Save & Exit

Backup Drive Setting

OPERATION MANUAL

46

① Windows Explorer② Go to DVR Mode ③ Configuration Setting

(Icon Name, Color, Date, Network, Printer)④ DVR Shutdown

①

②

③

④

⑨

⑩

⑤

⑥

⑦⑧

⑪

⑫

① Icon Name ② Windows Task Manager③ Save Configuration Files④ Load Configuration Files⑤ Register User⑥ Upgrade DVR⑦ Program Version⑧ Uninstall DVR Program⑨ Network Setting⑩ Printer Setting⑪ DATE/TIME Setting⑫ Disk Management

SETUP (TOPS SERIES)

Configuration SettingSHELL MODE

①

②

③

④

OPERATION MANUAL

47

5. SUPPLEMENT

5.1 Sensor/ D/O Installation

5.2 PAN/TILT Installation

OPERATION MANUAL

48

6.1 Sensor Installation 6.1 D/O Installation (Alarm)

MP5909/6916/8916

OPERATION MANUAL

49

6.1 Sensor Installation 6.1 D/O Installation (Alarm)

1 2 3 4 5 6 7 8 GND

sensor-1 sensor-2 sensor-3

power supply

sensor-1 sensor-2 sensor-3

power supply

1 2 GND 3 4 GND 5 6 GND 7 8 GND

9 10 11 12 13 14 15 16GND GND GND GND

1 2 3 4 5 6 7 8 COM

alarm siren warning light

power supply

(+)(-) (+) (-)

(-)

(+)

1 2 COM 3 4 COM 5 6 COM 7 8 COM

alarm siren warning light

power supply

(+)(-) (+) (-)

(+)

TOPS 5909/6916/8916

TOPS 5216

OPERATION MANUAL

50

6.2 PAN/TILT Installation

Audio Installation

TOPS 5909/6916/8916 TOPS 5216

TOPS 5909/6916/8916 TOPS 5216

OPERATION MANUAL

51

7.1 IP Connection

7.2 PDNS Connection

7. CLINETCONNECTION

OPERATION MANUAL

52

7.1 IP Connection

① Press “Find” or “Search” button

② Press “New Address” button

②

①

③ Type Server name, IP address

④ Press “OK” button

⑤ Choose a “USER ID”⑥ Select the P/W for the User ID

Default P/W is “0”.⑦ Press “OK” button

①

Administrator

OPERATION MANUAL

53

7.2 PDNS Connection

① Press “Find” or “Search” button

② Press “New Address” button

②

①

③ Type Server name like the aboveEx) @security

④ Press “OK” button

⑤ Choose a “USER ID”⑥ Select the P/W for the User ID

Default P/W is “0”.⑦ Press “OK” button

①

Administrator

Note:PDNS Setting on DVR should be done toUse PDNS on Client Connection.Refer to the Page32 for PDNS Settingon DVR

Note:Type “@”with DVR ID into Sever Name.

OPERATION MANUAL

54

8.1 Surveillance

8. CLIENTSURVEILLANCE

OPERATION MANUAL

55

8.1 SURVEILLANCE

SPEED SETUP(CLIENT CONFIGURATION)

① User level ② Network Live View③ Screen Division④ Audio Selection⑤ Camera Selection ⑥ D/O (Alarm Out) Control⑦ Network Speed Control⑧ Connect / Disconnect⑨ Search Mode (Client Configuration)⑩ Pan/Tilt ⑪ Setup Mode⑫ Exit

① Camera Name ② Audio Record③ Show current mode④ Show recording status⑤ Pop up Menu - Choose one CH and right mouse click

③

①

②

④

⑤

⑥

⑦

⑨⑧

⑩ ⑪

① Beep On/Off when Alarm② Show the directory of sound file③ Select the sound file④ Select image size for transmission⑤ Adjust image quality for transmission ⑥ Search Time interval to receive next

image from DVR⑦ Event Pop up Selection⑧ PDNS IP Address⑨ Save & Exit⑩ Cancel

Audio

④①

②

③

⑤

⑫

⑪⑩⑨

⑧

②

①

③ ④ ⑤ ⑥ ⑦

Note:

Live Scale: Original, Medium, SmallOriginal: Recorded Resolution on DVRMedium: 320*240Small:160*120

Live Quality: Image QualityIf you want faster transmission from DVR

to Client. We recommend you to set live scale “Small” and Image quality “Low”.

It will be faster than before but the image quality is not good.

Note:Live Scale is not available on ME DVR.

OPERATION MANUAL

56

9.1 Search

9.2 Detail Search

9. CLIENTSEARCH

OPERATION MANUAL

57

9.1 SEARCH 9.2 DETAIL SEARCH

① Playback Image ② Screen Division③ Camera Selection④ Calendar⑤ Playback Control

① Select Year / Month② Show date with recorded data in circle③ Daylight Search④ JPG.BMP, AVI Save, Print. ColorNote:JPG.BMP, AVI save is not available on some models.

①

②

③

④

④

⑤

② ③

①

① Playback Image ② Show continuous image ③ Detail Search Menu

Zoom, Pan, AVI, JPG, BMP, Print

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩

① Print② Print Setup③ Show previous image④ Show next image⑤ Zoom In ⑥ Zoom Out⑦ Preview 1X2 layout⑧ Preview 2X4 layout⑨ Preview 4X8 layout⑩ Close

①

②

③

OPERATION MANUAL

58

10.1 PAN/TILT

10.2 Preset

10. CLIENTPAN/TILT

OPERATION MANUAL

59

PAN/TILT Preset

⑧

①

②

③

④

⑤

⑥

⑦

① Go to Preset setting ② Light On/Off or Camera Menu③ Wiper On/Off④ Auto Run⑤ Focus ⑥ Zoom In/Out⑦ Pan/Tilt Direction⑧ Show a selected camera

⑧

①

②

③

④

⑤

⑦

⑥

① Preset Duration ② Preset No. ③ Preset Set④ Preset Clear⑤ Preset Move⑥ Preset Tour⑦ Zoom In/Out⑧ Show Pan/Tilt Protocol

Preset Setup

① Select a camera on Live mode② Press “Preset” button③ Press “Set” button ON④ Set direction and zoom for preset⑤ Select a No. from 1~12.⑥ Press “Set” button OFFNote:Camera should support “Preset” functionfor Preset Setup.

Clear Preset Setup

① Select a camera on Live mode② Press “Preset” button③ Press “Clear” button ON④ Select a No. from 1~12⑤ Press “Clear” button OFF

PRESET MOVE

① Select a camera on Live mode② Press “Preset” button③ Press “Move” button ON④ Select a No. from 1~12

PRESET TOUR

① Select a camera on Live mode② Press “Preset” button③ Press “Preset Tour” button ONMove a camera according to the savedPreset No. from 1~12