tools, test, and safety | power & tel

ptsupply.com

T O O L S , T E S T & S A F E T Y

TTS C O N T A C T Y O U R P O W E R & T E L R E P R E S E N T A T I V E F O R A L L S T O C K S P E C I A L S

800.238.7514 | [email protected] | www.ptsupply.com

https://www.ptsupply.com/

mailto:marketing%40ptsupply.com?subject=Tools%2C%20Test%20%26%20Safety%20Inquiry

In case with lid detached

70R+

Fujikura 70R+ Fusion Splicer The Fujikura 70R+ ribbon splicer utilizes precision, fxed v-groove technology for splicing ribbon fber up to 12 fbers, including single fbers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R+ has automated and enhanced user control features to increase splicing effciency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. These automated features reduce the steps needed to execute a splice resulting in greater splicing effciencies. An auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. An innovative transit case doubles as a built-in or mobile workstation. In an industry frst, the 70R+ is also equipped with Bluetooth® technology. This allows the splicer to actively communicate with Bluetooth enabled fber preparation accessories making maintenance of fber preparation tools easier than ever!

Features

• Bluetooth wireless communication • Automated and programmable wind protector • 40-second automated tube heater • Fully ruggedized for shock, dust and moisture • Li-ion battery with 110 splices/shrinks per charge • On-board training and support videos • Multi-function transit case with integrated workstation

Ordering Information

DESCRIPTION AFL NO. 70R+ Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-70-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

S015669

70R+ Fusion Splicer Kit (with cleaver) Includes: CT50 Cleaver, RS03 Stripper, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-70-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

S015670

70R+ Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT50 Cleaver, RS03 Stripper, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-70-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

S015671

70R+ Fusion Splicer Kit without Bluetooth technology (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT08 Cleaver, RS03 Stripper, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-70-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

S017075

One Year Extended Warranty S012996

Two Year Extended Warranty S013000

26

© 2019, AFL, all rights reserved. PP-4-00074, Revision 13, 2.13.2019 Specifcations are subject to change without notice.

https://www.ptsupply.com/manufacturer/AFL-TELECOMMUNICATIONS

In case with lid detached

70S+

Fujikura 70S+ Fusion Splicer The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S+ has added automated and enhanced user control features to increase splicing effciency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. In an industry frst, the 70S+ is also equipped with Bluetooth® technology. This allows the splicer to actively communicate with Bluetooth enabled fber preparation accessories making maintenance of fber preparation tools easier than ever! The 70S+ will also be available without Bluetooth functionality.

Features

• Bluetooth wireless communication • Automated and programmable wind protector • 13-second automated tube heater • Fully ruggedized for shock, dust and moisture • Li-ion battery with 200 splices/shrinks per charge • 5 mm cleave length for splice on connector or small package needs • Sheath clamp or fber holder operation • On-board training and support videos • Multi-function transit case with integrated workstation


DESCRIPTION AFL NO. 70S+ Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

S015580

70S+ Fusion Splicer Kit (with cleaver) Includes: CT50 Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, and CC30 Transit Case with Carrying Strap

S015590

70S+ Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT50 Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

S015591

70S+ Fusion Splicer Without Bluetooth (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

S017000

One Year Extended Warranty S012996 Two Year Extended Warranty S013000

3

© 2013, AFL, all rights reserved. PP-4-00059, Revision 9, 10.10.2018 Specifcations are subject to change without notice.


FlexScan® OTDR with SmartAuto®, FleXpress™ and LinkMap®

Pocket-sized, Performance-packed, User-friendly, and Affordable

FleXpress™

Fast OTDR Test

Features

• Fast, accurate OTDR network characterization or fault location • FleXpress mode completes OTDR test in <5 seconds • Integrated MPO Switch control via USB • Test up to 1:64 PON with 20 m PON dead zone • Easy to understand LinkMap results with pass/fail indications • Single, dual or triple wavelength single-mode • Integrated Source, Power Meter, VFL (visual fault locator) • Bluetooth and WiFi communications • Compatible with FOCIS Flex connector inspection system • Rugged, lightweight, hand-held for feld use • Large, bright touchscreen display easily viewed indoors and out • Internal / external data storage

Applications

• PON or point-to-point network verifcation or troubleshooting • OTDR testing plus Insertion Loss and Power measurements • Locate faults exceeding industry or user pass/fail thresholds • Visually pinpoint location of macro-bends or breaks

Performance-packed: With SmartAuto multi-pulse acquisition, up to 37 dB dynamic range and best-in-class 20 m PON dead zone, FlexScan PON OTDRs test FTTH PONs up to 1:64 while still detecting and measuring events only meters apart.

Fast! FleXpress mode completes dual-wavelength tests in <5 seconds – 10 x faster than conventional OTDRs! For multi-fber testing, FleXpress mode automatically controls 12-fber MPO Switch to further reduce multi-fber test time.

User-friendly: FlexScan OTDRs enable both novice and expert technicians to quickly, reliably and accurately detect, locate, identify and measure optical network components and faults. After applying industry-standard or user-set pass/fail criteria, the network is displayed using FlexScan’s intuitive, icon-based LinkMap view. Acquired results may be stored internally or externally. FlexScan automates test setup, shortens test time and simplifes results interpretation, improving effciency and reducing the cost of test.

Pocket-sized: At 3.5 x 6 x 1.75 in. (86 x 160 x 43 mm) and less than one pound (0.4 kg), FlexScan OTDRs truly ft in your pocket, yet still provide a large, bright indoor/outdoor touchscreen display and all-day operation.

And Affordable: With optional connector inspection, integrated source, power meter and VFL, FlexScan offers an all-in one solution, ensuring technicians have everything they need to locate and resolve optical network issues. Uploaded results may be viewed and reports may be generated using the included Windows-compatible TRM® 2.0 Test Results Manager software.

Available in Convenient, Cost-saving Installation and Troubleshooting Kits - Bundle FlexScan with your choice of launch cable, FOCIS Flex connector inspection probe and tips, and/or AFL’s universal optical fber identifer (OFI).

©2018, AFL, all rights reserved. FS200-00-2000 Revision AG 2018-10-10www.AFLglobal.com or (800) 321-5298, (603) 528-7780 Specifcations are subject to change without notice.

1


OFL280-10x FlexTester OTDR

Hand-held Multifunction OTDR and Loss Test Set

Features

• Patented in- or out-of-service OTDR testing from a single port • Icon-based LinkMap® display with pass/fail for easy network analysis • ServiceSafe® live PON detection and OTDR test without service disruption • Wave ID reduces insertion loss test time and eliminates setup errors • 34/32 dB dynamic range at 1310/1550 nm • Best-in-class 0.8/3.5 m event/attenuation dead zones • Rugged, hand-held, lightweight (<1 kg) • High-contrast, backlit display: Easily viewed, even in direct sunlight • Industry-leading battery life: >12 hours continuous operation • Instant On: Ready to test in <5 seconds

Applications

• Cost-effective point-to-point and FTTH PON testing • Troubleshoot in-service FTTH networks, including live PON power measurements plus

PON OTDR testing at 1625 nm. • Complete multi-wavelength insertion loss tests faster and eliminate setup errors using

Wave ID source and power meter. • Generate fber-identifying tones and stable CW signals using integrated optical source. • Trace fbers or locate faults using the Visual Fault Locator (VFL).

The AFL OFL280-10x FlexTester family offers an unmatched combination of optical fber test functions, ease-of-use, portability, and value. All OFL280 FlexTester models include an integrated single-mode 1310/1550 nm OTDR with PON-optimized and standard test modes, optical power meter, 1310/1550 nm laser source, and visual fault locator.

With new LinkMap, pass/fail analysis, macro-bend and splitter detection, launch quality check, plus AFL’s unique ServiceSafe and Wave ID features, OFL280 FlexTesters enable even novice users to troubleshoot like pros.

The OFL280 FlexTester family offers four models to best suit your application needs:

• OFL280-103: Verify both in-service and out-of-service FTTx networks from a single port. Includes 1310/1550/1625 nm live PON OTDR with integrated PON Power Meter.

• OFL280-102: Most complete out-of-service FTTx PON testing at all PON wavelengths (1310/1490/1550 nm). • OFL280-100: Cost-effective 1310/1550 nm OTDR for out-of-service installation testing or troubleshooting both FTTx PON and point-

to-point fber optic networks.

Over 1000 OTDR test results (Telcordia SR-4731 .SOR fle format) may be saved in the OFL280’s internal memory. Stored OTDR and OPM results may be transferred to PC via wireless Bluetooth® or USB cable. Windows® compatible TRM 2.0® Test Results Manager software is included for OTDR and OPM results viewing, analysis, and professional report generation.

©2016, AFL, all rights reserved. OFL2-28-2000 Revision 1V, 2016-01-12www.AFLglobal.com or (800) 321-5298, (603) 528-7780 Specifcations are subject to change without notice.

1


FOCIS Flex U.S. Patent 9,217,688

Fiber Optic Connector Inspection System

Features • Auto-focus and auto-centering for fast, easy inspection • Untethered operation simplifes access at patch panels • IEC, IPC and user-defned pass/fail analysis • Self-contained, compact, hand-held inspection solution • Use independently, or pair with FlexScan or FlexTester OTDR • Confgure and access results from Android or Apple App • Save results internally and upload via Bluetooth or USB • Ergonomic design fts in the palm of your hand • Generate inspection reports using aeRos or TRM® 2.0

Applications • Inspect connectors on patch cords or in bulkhead adapters • Optical network installation, troubleshooting and maintenance • Inspect MPO/MTP multi-fber connectors • Assure critical fber infrastructure performs properly • Keep fber connections working at optimal performance levels • Verify proper connector cleaning practices are being used

Pass/fail results in seconds: With the press of a single button, FOCIS Flex auto-focuses, captures and centers the end-face image, applies pass/fail rules, displays image and pass/fail results, and wirelessly transfers image and results to a paired FlexScan or FlexTester OTDR. All in a matter of seconds!

Independent, untethered operation: With rechargeable battery supply and integrated display, FOCIS Flex can be used independently – without requiring an external OTDR or display unit.

Pair with FlexScan or FlexTester OTDR: Still prefer to view and save images and pass/fail results on your FlexTester OTDR? No problem! Captured images and pass/fail results are immediately displayed and easily saved on the paired device along with associated OTDR and/or insertion loss test results.

Pair with Android or iOS device: Display images on your Android or iOS device using AFL’s FOCIS Flex mobile App. Save results to AFL’s aeRos cloud-based workfow management system.

Save results internally or externally: FOCIS Flex internally stores thousands of results using fle-naming capabilities similar to FlexScan and FlexTester OTDRs. A micro-USB port supports fast upload of internally stored results to PC, and ensures your FOCIS Flex software can be updated to the latest features and supported languages.

Wide range of adapter tips: Interchangeable adapter tips support connector inspection for a wide range of both single-fber and multi-fber patchcords and bulkhead-mounted connectors having either PC or APC polished end-faces.

FOCIS Flex is available in standalone kit confgurations including soft carry case / holster and user-selected adapter tips. Available FlexScan and FlexTester PRO and Complete Kits bundle FOCIS Flex with the selected OTDR, fber ring and cleaning supplies.

©2018, AFL, all rights reserved. FFLX-00-2000 Revision AC 2017-05-23www.AFLglobal.com or (800) 321-5298, (603) 528-7780 Specifcations are subject to change without notice.

1


One-Click® Cleaner Series

U.S. Patent Numbers 7,212,719 and 8,087,118

Features

• Cleans connectors on jumpers and in adapters • Effective on a variety of contaminates including dust and oils • Ergonomic, comfortable design with single action cleaning • Each clean is performed with fresh cleaning tape • Compliant with EU/95/2002/EC Directive (RoHS) • Several models available for a variety of single and multi-fber connectors • Low cost per clean

The Original One-Click Cleaner

The One-Click Cleaner is an easy-to-use option for cleaning connectors on jumpers and in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to

SC/ST/FC MU/LC ODC MT-RJ advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fber end-face is effectively, but gently cleaned. The One-Click Cleaner is a must-have for feld technicians. Small enough to ft in a shirt pocket and a great addition to cleaning kits. Save your wrist – no more twist!

Rugged ODC Version

With the increasing demand of Outdoor Connector (ODC) plug and socket styles, the ODC One-Click Cleaner, which cleans the ferrules in ODC plug, socket and 1.25 mm ferrules, is an essential cleaning tool for WiMax Base Station, Fiber-to-the-Antenna, Broadcasting and Surveillance Video technicians.

Compact One-Click Cleaner Mini

Offering the same technology and performance as the original, the One-Click Cleaner is now available in a smaller, more compact size, which allows for cleaning of connectors in tighter places. Its smaller size also makes it a great addition to test kits and cleaning kits. The One-Click Mini that is offered by AFL as a low cost solution with 100+ cleans per unit is now also available with same 500+ cleans per unit as the standard One-Click. The One-Click Mini is an effective, easy-to-use cleaning solution for SC, ST, FC, LC, MU and TFOCA connectors.

One-Click MT-RJ

The One-Click MT-RJ (Mechanical Transfer Registered Jack) is designed to clean both fbers of this small form factor connector. It complies with the EU/98/2002/EC RoHS directive and accommodates both male (pinned) and female (socketed) connectors with PC/UPC ferrules.

Mini-100 MU/LC

Mini-500 MU/LC

Mini-100 SC, ST, FC

Mini-500 SC, ST, FC

© 2015, AFL, all rights reserved. 8500-05-2000 Revision AA, 2017-10-11www.AFLglobal.com or (800) 321-5298, (603) 528-7780 Specifcations are subject to change without notice.

1


Sidekick® Plus Advanced Cable Maintenance Test Set

Now with improved test set up, speed of test and longer battery life. The Greenlee Communications Sidekick® Plus helps technicians diagnose and troubleshoot problems with twisted pair cable. Using the latest digital technology the Sidekick® Plus provides an easy-to-use, feature rich, multifunction test set for today’s telecom engineer.

In addition to the standard Sidekick® Plus features - Stress Test, Volt-ohm meter (VOM), Loop Current tests, Longitudinal Balance, Transmission and Noise tests, Open Meter, Load Coil detection, Resistive Fault Locate (RFL) and a Time Domain Refectometer (TDR) - we’ve added a 1 Gigaohm Insulation Resistance test, an optional suite of Wideband Spectrum Analysis tests, and an option for VDSL/ ADSL sync and service tests.

With improved test set up and speed of test, and with a longer battery life, the Greenlee Communications Sidekick® Plus helps technicians get the job done faster, safer, and easier.

https://www.ptsupply.com/manufacturer/greenlee-textron

New Product Features • 1 Gigaohm Insulation Resistance • Advanced Pulse TDR for improved accuracy (Step TDR option available) • Improved speed of test and menu selection • Long lasting, Li-Ion Rechargeable Batteries

Optional Features • Available Now: Wideband Tests Option

o Noise Spectrum Analysis to 30 MHz o Loss measurements to 4.4MHz o Reference Tone to 4.4MHz

• Coming Soon: Sidekick® Plus with Wideband and VDSL / ADSL Sync o All standard features of Sidekick® Plus with Wideband plus:

• Display of DSL Showtime information • Error and Alarm detection • Graphical display of bits-per-tone, signal-to-noise margin, and H-Log data • Upper layer testing (Ping, Trace-route, HTTP, and FTP)

Specifcations TECHNICAL SPECIFICATIONS

Stress Test 0 to 82 dBrnC

AC Volts 250V

DC Volts 300V Resistance 100 MΩ Leakage 999 MΩ Open Meter Up to 18.6 miles (30 km) Count Load Coils 0 to 5 Loop Current 110 mA Circuit Loss -70 to 3 dBm Circuit Noise 0 to 90 dBrnC Tracing Tone Generator 200 Hz to 20 kHz Reference Tone Output Level 3 to -20 dBm Custom Auto Test with Pass / Fail 400 Autotest Results Display Resolution 320 x 240 sunlight readable Battery Li-Ion Battery Life (Typical) 8 hours Weight (Including Battery) 3 lbs (1.4 kg) Operating Conditions -0.4 to 122 °F (-18 to 50 °C), 0 to 95% Humidity IP Rating / Environmental Protection BS EN 60529 level IP20CW


CAT NO. UPC NO. DESCRIPTION QTY. 1155-5001 01316 Sidekick® Plus Kit 1 1155-5003 01324 Sidekick® Plus CE Kit 1 1155-5005 01463 Sidekick® Plus Kit with Impulse Noise, Step TDR 1 1155-5009 01317 Sidekick® Plus Kit with Impulse Noise, Step TDR & Wideband 1


FI-100 FIBER IDENTIFIER

SPECIFICATIONS Identified Wavelength Range

800-1700nm

Identified Signal Type 270Hz ±5%, 330Hz ±5%, 1kHz ±5%, 2kHz ±5%

Detector Type 1mm InGaAs

Ø0.25 (Applicable for Bare Fiber and ribbon cable)

Adapter Types Ø0.9 (Applicable for Ø0.9 Cable)

Ø2.0 (Applicable for Ø2.0 Cable)

Ø3.0 (Applicable for Ø3.0 Cable)

Signal Indication Left & Right LED

Signal Direction Test Range -46 to 10dBm (1310nm)

(CW/0.9mm fiber) -50 to 10dBm (1550nm)

Signal Power Test Range (CW/0.9mm fiber) -50 to +10dBm

Signal Frequency Display 270Hz, 330Hz, 1kHz, 2kHz; (+/-5%)

*Specifications subject to change without notice

ORDERING INFORMATION

Tone Detect Test Range (Average)

Insertion Loss (Typical/ Maximum)

Battery

Operating Temperature

Storage Temperature

Dimension

FOR PRODUCT VIDEOS, DEMONSTRATIONS AND MORE, VISIT:

youtube.com/GreenleeDEMO

Ø0.9, Ø2.0, Ø3.0

-30 to 0dBm (270Hz, 1kHz)


Ø0.25

-25 to 0dBm (1kHz, 2kHz)


0.3 / 0.8dB at 1310nm

1.5 / 2.5dB at 1550nm

AAA Alkaline (2)

-10 to +60ºC

-25 to +70ºC

196 X 30.5 X 27mm

Weight 195g

Certifications CE, FCC, RoHS

FI-100-KIT

CAT NO. UPC NO. DESCRIPTION

FI-100 KIT 03353 Fiber Identifier Kit

FI-100-250 03354 250µm Adapter & Ribbon Cable

FI-100-900 03355 900µm Adapter

FI-100-2MM 03356 2mm Adapter

FI-100-3MM 03357 3mm Adapter

FI-100-CASE 03358 Soft Carry Case

FI-100-MANUAL

FI-100-SUNSHADE 03359

The FI-100 KIT comes complete with all four adapters, instruction manual, sun shade and two AAA batteries all packed in a soft carry case.

*Frontier Communications is a registered trademark of Frontier Communications Corporation.

Instruction Manual

Sun Shade


MICRO OPTICAL POWER METER Essential Tools for the Premise Technician

SIMPLE User interface

FAST Accurate power measurements

SAFE Optical power levels for effective visual fault locating

VERSATILE Integrated white LED for viewing in dimly lit locations with SOS

FEATURES • Wide measurement range (+6 to -70dBm) • High power CATV range (+26 to -50dBm) • Optional VFL for safe and effective fault locating • Singlemode and multimode compatible • Calibrated wavelengths of 850/1300/1310/1490/1550/1625nm • 270Hz, 1kHz and 2kHz tone detect • Auto power off

Fast. Accurate. Reliable. greenleecommunications.com


TRACING & LOCATING™

PROFESSIONAL TONE TRACING KIT 701K-G

Greenlee’s tone and probe tracing kit allows professional technicians to identify wires from a bundle, to monitor voltage passing through the circuit, to check breaks in the circuit and to trace wires through walls. The Greenlee Tracing Kit includes the generator tone which injects a signal onto the cable to be traced and the tracing probe which is used to trace out the wire. Quick, Reliable, Connections.

Trace Faster Work Easier Stay Safe

Use two distinct tone signatures Easier signal strength viewing & Enhanced voltage to trace telephone, data, and three listening modes: speaker, protection

security cables faster headset, or butt-in telephone (up to 150 V DC)

Features: Designed and

• Industry standard tracing for voice, data, and video wiring assembled in USA.

• Headset and Adjustable Gain Control (200EP-G)

• LED Worklight - view behind furniture, inside racks, and other dim lighting conditions.

• LED Tone Proximity Indicator illuminates brighter the closer you get to the correct pair (closer to the tone).

• Detect Faults – one or two line telephone service, voltage/polarity and shorts/continuity (77HP-G)

• Distinct Tracing Signatures – two warble tones available for easier tracing.

• Enhanced Voltage Protection – up to 150 V DC. • Metal or Plastic Tips – Use the best tip for the job. • Includes: 77HP-G Tone Generator,

200EP-G Tracing Probe, modular plug, alligator test leads, RJ11/45, and socket adaptor.

FAST. ACCURATE. RELIABLE.


Network Connectivity Solutions

From the Work Area to the Telecommunications and Equipment Rooms, HellermannTyton offers

Network Connectivity Products that are designed and tested to ensure the highest network performance.

Pre-Terminated Solutions RapidNet® is a patented, connect-and-go system providing high performance copper and fiber solutions within the same footprint, increasing speed of installation while reducing waste Copper RapidNet Fiber RapidNet

High Density Solutions Auxiliary Rails

materials. Choose from a wide variety of accessories to enhance your RapidNet installation.

Accessories

HelaNet™ Copper Solutions Fully structured cabling solutions include Category 6A, Category 6 and Category 5e product lines for high performance, quality engineered installations. Certification programs, system warranties and training opportunities provide a well-rounded solution.

Keystone Jacks Faceplates Surface Mount Boxes Multimedia Modules

Patch Panels 110 Blocks Patch Cords Termination Tools

HelaNet™ Fiber Solutions From the data center to the work station, HellermannTyton fiber solutions include high-quality components to help achieve optimal bandwidth and performance at different density requirements.

Enclosures Adapter Panels Splice Trays Cable Assemblies

Connectors Modules

https://www.ptsupply.com/manufacturer/hellermanntyton

Network Connectivity Solutions

Cable Management Products Maximize performance with wire managers, racks, shelves, panels and enclosures that manage and organize structured equipment and connectivity in server rack, network system and data center applications.

Horizontal Cable Management

Vertical Cable Management Racks Shelves

Cable Management Panels

Raised Floor Enclosure

Routing & Raceway Products Easy to configure and install, these durable and aesthetically pleasing cable management solutions are the protective pathways for securing and organizing vital network cables. Multi-Channel Surface

Raceway Multi-Channel Raceway Fittings

Low Voltage Surface Raceway

High Density Slotted Duct

Identification Products

HellermannTyton thermal transfer printing systems, label design software and mobile app enable easy, long-lasting code-compliant labels.

TagPrint® Pro 3.0 Software

TagPrint® Xpress Data Mobile App

Thermal Transfer Printers and Labels Laser Tag Labels

Cable Protection and Accessories HellermannTyton offers a wide range of products to manage, bundle, route and protect wires and cables for enhanced reliability and next generation network capabilities.

©HellermannTyton Corporation

LITPD273 Rev.1, 10.2014

Grip Tie Straps Cable Ties EVO® 7 Adhesive Mounts

Convoluted Tubing Spiralwrap Helawrap


Bundling & Securing: Cable Ties - Special Function

Aerial Support Ties Aerial Support Ties feature a built-in spacer to separate cables

from the support wire and prevent abrasion. A one-piece design,

combining the tie and spacer into one part, reduces installation time

and inventory costs. The outside serrations along the strap prevent

damage to cables. Formulated from a special nylon blend, these ties

are specifically suited for long-term outdoor use. The bent tail allows

for quick and simple installation by hand.

Features & Benefits • Built-in spacer separates cable from support wire to prevent damage.

• UV-resistant materials contain an inhibitor which prolongs the life of the tie in outdoor environments.

• One-piece design reduces installation time.

• Outside serrations prevent cable damage.

• Bent tail and molded-in instructions allow for quick installation by hand.

W

Material Polyamide 6.6 high impact modified, heat and UV-stabilized (PA66HIRHSUV)

Operating Temperature -40°F to +230°F (-40°C to +110°C)

Flammability UL94 HB

Material Data

H

L

Product Selection

Min. Tensile Max. Bundle Width Height Strength Length (L) Diameter (W) (H) Pkg.

Article No. Part No. Type Ib. (N) in. (mm) in. (mm) in. (mm) in. (mm) Color Qty

111-01671 111-01671 TAS120M 120.0 (535.0) 12.4 (31.5) 2.75 (7.0) 0.5 (12.7) 0.76 (19.0) Black (Bk) 500

111-01672 111-01672 TAS120L 120.0 (535.0) 17.4 (44.2) 4.5 (11.4) 0.5 (12.7) 0.76 (19.0) Black (Bk) 500

HellermannTyton North American HellermannTyton Canada HellermannTyton Mexico Corporate Headquarters Unit #4, 205 Industrial Parkway North Anillo Periferico Sur 7980 Edificio 6A 7930 N. Faulkner Rd, PO Box 245017 Aurora, Ontario L4G 4C4 Canada Parque Industrial Tecnologico II Milwaukee, WI 53224-9517 Phone: (800) 661-2461 Santa María Tequepexpan Phone: (414) 355-1130, (800) 537-1512 Fax: (800) 390-3904 Tlaquepaque, Jalisco, Mexico 45601 Fax: (414) 355-7341, (800) 848-9866 email: [email protected] Phone: 011-52-33-3-133-9880 email: [email protected] Fax: 011-52-33-3-133-9861 www.hellermann.tyton.com email: [email protected] TS16949, ISO 9001, and ISO 14001 Certified ISO 9001 Certified

Warranty Policy HellermannTyton products are warranted to be free from defects in material and workmanship at the time sold by us; but our obligation under this warranty and that of the seller is limited to the replacement of the product, and neither we nor the seller are bound by any other warranty, expressed, implied or statutory. Under no circumstances are we or the seller liable for any loss, damage, expenses or consequential damages of any kind arising out of the use or inability to use these products. All are sold with the understanding that the user will test them in actual use and determine their adaptability for the intended uses.

© HellermannTyton Corporation LITPD301, 9.2015


Identification: Labels

Pre-Printed Voltage Markers

HellermannTyton Pre-Printed Voltage Markers are made of durable vinyl and are available with the most commonly used warnings and alerts. The self-adhesive markers allow users to clearly identify electrical lines, voltages and hazards. The durable adhesive backing is resistant to UV exposure as well as chemicals and solvents. Use voltage markers on conduit, pipe, circuit boxes or electrical panels.

Features and Benefits

• HellermannTyton Voltage Markers are available in three sizes to best suit application requirements.

• Glare-freesurfaceforeasyidentificationfromanyangle. Material Vinyl

• Resists moisture for long-lasting durability. Operating

-40°F to +176°F (-40°C to +80°C)• Markersareflexibletowrapsecurelyaroundvarioussizewires, pipes Temperature and conduit.

Adhesive Acrylic • Includes part number on label to assist with reorders.

Width Height Cards ARTICLE PART (W) (H) per NO. NO. TYPE Description in. (mm) in. (mm) Pkg. Markers

Voltage Marker, 110 Volts,596-00946 596-00946 VM110A 8.50 (215.2) 2.25 (57.2) 50

1/card, 50 cards/pkg

Voltage Marker, 110 Volts,596-00947 596-00947 VM110C 2.25 (57.2) 0.50 (12.7) 50


Voltage Marker, 120/208 Volts,596-00928 596-00928 VM120/208A 8.50 (215.2) 2.25 (57.2) 50


Voltage Marker, 120/208 Volts,596-00929 596-00929 VM120/208B 4.25 (108.0) 1.13 (28.6) 50


Voltage Marker, 120/208 Volts,596-00930 596-00930 VM120/208C 2.25 (57.2) 0.50 (12.7) 50


Voltage Marker, 120/240 Volts, 120/240 VOLTS120/240 VOLTSHellermannTyton 596-00958 HellermannTyton 596-00958596-00958 596-00958 VM120/240B 4.25 (108.0) 1.13 (28.6) 50 120/240 VOLTS4/card, 50 cards/pkg HellermannTyton 596-00958

Voltage Marker, 120 Volts,596-00925 596-00925 VM120A 8.50 (215.2) 2.25 (57.2) 50


Voltage Marker, 120 Volts,596-00926 596-00926 VM120B 4.25 (108.0) 1.13 (28.6) 50


Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.

Helle

rman

nTyt

on 5

96-0

0958

PEEL

PE

EL



Pre-Printed Voltage Markers (cont.)

ARTICLE PART Width

(W) Height

(H) Cards per

NO. NO. TYPE Description in. (mm) in. (mm) Pkg. Markers

596-00927 596-00927 VM120C Voltage Marker, 120 Volts,

17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50

596-00931 596-00931 VM208A Voltage Marker, 208 Volts,

1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50

596-00932 596-00932 VM208B Voltage Marker, 208 Volts,

4/card, 50 cards/pkg 4.25 (108.0) 1.13 (28.6) 50


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


4/card, 50 cards/pkg 4.25 (108.0) 1.13 (28.6) 50


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50


4/card, 50 cards/pkg 4.25 (108.0) 1.13 (28.6) 50


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50

596-00938 596-00938 VM277/480A Voltage Marker, 277/480 Volts,

1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50

596-00939 596-00939 VM277/480B Voltage Marker, 277/480 Volts,

4/card, 50 cards/pkg 4.25 (108.0) 1.13 (28.6) 50

596-00940 596-00940 VM277/480C Voltage Marker, 277/480 Volts,

17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50




Pre-Printed Voltage Markers (cont.)

ARTICLE PART Width

(W) Height

(H) Cards per

NO. NO. TYPE Description in. (mm) in. (mm) Pkg. Markers


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50


4/card, 50 cards/pkg 4.25 (108.0) 1.13 (28.6) 50


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50


17/card, 50 cards/pkg 2.25 (57.2) 0.50 (12.7) 50


1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50

596-00956 596-00956 VMHIGHVOLTAGEA Voltage Marker, HIGH VOLTAGE,

1/card, 50 cards/pkg 8.50 (215.2) 2.25 (57.2) 50

596-00944 596-00944 VMSINGLEPHASEB Voltage Marker, Single Phase,

4/card, 50 cards/pkg 4.25 (108.0) 1.13 (28.6) 50

596-00945 596-00945 VMTHREEPHASEB Voltage Marker, Three Phase,

4/card, 50 cards/pkg 4.25 (108.0) 1.13 (28.6) 50




Pre-Printed Safety Signs

HellermannTyton Pre-Printed Safety Signs are made of durable vinyl and are supplied with the most commonly used warnings and alerts. The acrylic adhesive backing is resistant to UV exposure as well as chemicals and solvents.

Features and Benefits

• HellermannTyton Signs are designed to meet the needs of most common applications, making sign selection easy and effective.

• Signs are code and ANSI compliant to meet all municipal requirements.

• Includes bar code and part number on sign to assist with reorders.

Material Vinyl

Operating Temperature

-90°F to +186°F (-67°C to +75°C)

Adhesive Acrylic

ARTICLE NO.

PART NO. TYPE Description

Width (W)

in. (mm)

Height (H)

in. (mm) Pkg. Qty. Signs

597-00121 597-00121 CS710AEFP Caution Sign,

Area in Front of Electrical Panel Must Be Kept Clear

10.0 (254.0) 7.0 (177.8) 25

597-00122 597-00122 CS1014AEFP Caution Sign,

Area in Front of Electrical Panel Must Be Kept Clear

14.0 (355.6) 10.0 (254.0) 25

597-00078 597-00078 CS710CWYS Caution Sign,

Caution Watch Your Step 10.0 (254.0) 7.0 (177.8) 25

597-00098 597-00098 CS1014CWYS Caution Sign,

Caution Watch Your Step 14.0 (355.6) 10.0 (254.0) 25

597-00079 597-00079 CS710DNOWG Caution Sign,

Do Not Operate Without Guards 10.0 (254.0) 7.0 (177.8) 25

597-00099 597-00099 CS1014DNOWG Caution Sign,

Do Not Operate Without Guards 14.0 (355.6) 10.0 (254.0) 25




Pre-Printed Safety Signs (cont.)

ARTICLE NO.


Width (W)

in. (mm)

Height (H)


597-00074 597-00074 DS710CSEBPO Danger Sign,

ConfinedSpaceEnter By Permit Only

10.0 (254.0) 7.0 (177.8) 25

597-00094 597-00094 DS1014CSEBPO Danger Sign,

ConfinedSpaceEnter By Permit Only

14.0 (355.6) 10.0 (254.0) 25

597-00072 597-00072 DS710DHV Danger Sign,

Danger High Voltage 10.0 (254.0) 7.0 (177.8) 25

597-00092 597-00092 DS1014DHV Danger Sign,

Danger High Voltage 14.0 (355.6) 10.0 (254.0) 25

597-00068 597-00068 DS710NSM Danger Sign, No Smoking

10.0 (254.0) 7.0 (177.8) 25

597-00088 597-00088 DS1014NSM Danger Sign, No Smoking

14.0 (355.6) 10.0 (254.0) 25

597-00077 597-00077 DS710TMSASA Danger Sign,

This Machine Starts and Stops Automatically

10.0 (254.0) 7.0 (177.8) 25

597-00097 597-00097 DS1014TMSASA Danger Sign,

This Machine Starts and Stops Automatically

14.0 (355.6) 10.0 (254.0) 25

597-00123 597-00123 EE710AWS Emergency Exit Sign,

Security Alarm Will Sound If Door is Open

10.0 (254.0) 7.0 (177.8) 25

597-00124 597-00124 EE1014AWS Emergency Exit Sign,

Security Alarm Will Sound If Door is Open

14.0 (355.6) 10.0 (254.0) 25




Pre-Printed Safety Signs (cont.)

ARTICLE NO.


Width (W)

in. (mm)

Height (H)


597-00082 597-00082 ES710EXIT Exit Sign,

EXIT 10.0 (254.0) 7.0 (177.8) 25

597-00102 597-00102 ES1014EXIT Exit Sign,

EXIT 14.0 (355.6) 10.0 (254.0) 25

597-00086 597-00086 NS710NAES Exit Sign,

Not An Exit 10.0 (254.0) 7.0 (177.8) 25

597-00106 597-00106 NS1014NAES Exit Sign,

Not An Exit 14.0 (355.6) 10.0 (254.0) 25

597-00083 597-00083 FS710FE Fire Sign,

Fire Extinquisher 10.0 (254.0) 7.0 (177.8) 25

597-00103 597-00103 FS1014FE Fire Sign,

Fire Extinquisher 14.0 (355.6) 10.0 (254.0) 25

597-00085 597-00085 FS710FAS First Aid Sign,

First Aid Station 10.0 (254.0) 7.0 (177.8) 25

597-00080 597-00080 NS710APO Notice Sign,

Authorized Personnel Only 10.0 (254.0) 7.0 (177.8) 25

597-00101 597-00101 NS1014APO Notice Sign,

Authorized Personnel Only 14.0 (355.6) 10.0 (254.0) 25

597-00081 597-00081 NS710SGRITA Notice Sign,

Safety Glasses Required In This Area

10.0 (254.0) 7.0 (177.8) 25

597-00100 597-00100 NS1014SGRITA Notice Sign,

Safety Glasses Required In This Area

14.0 (355.6) 10.0 (254.0) 25



36.25” 47.5”

39” 29”34”

Easy Buddy® Good Buddy® III Good Buddy® II Good Buddy® Mega Buddy® Big Buddy®

Features Flexible Rod Handles Tight Turns & Long Runs

Detach or Fold Frame For Use In Confned Areas All Terrain Wheels

Rod Diameter 1/4” 3/8” 1/2”

Lengths Available 300-500’ 300-400’ 400-600’ 300-400’ 1,500’ 400-1,000’

Recommended Conduit 1-2” 2-4” 4” or Larger

Applications Manhole-to-riser, riser-to-riser, cable vaults and large conduit runs. Manhole-to-manhole or long run cable pulls

Bend Radius 4” 7” 10”

Pull Strength 400 Lbs. 1,000 Lbs. 1,000 Lbs

Accessories Included

Accessory Kit, End Ferrule, Pulling Eye Repair Kit, End Ferrule, Pulling Eye

Accessory Kit: End Ferrule, Splice Ferrule, Adhesive, Emery Cloth, Pouch Repair Kit: 2 Splice Ferrules, 1 End Ferrule, Adhesive, Emery Cloth, Pouch

Dimensions 36.25” x 24.0” x 13” 34.0” x 26.5” x 15.5” 40.0” x 32.0” x 18.0” 29.0” x 29.0” x 27.0” 48” x 44.0” x 20.2”

ROD MARKED IN 5’ INCREMENTS (STANDARD) . AVAILABLE MARKED IN 1 METER INCREMENTS*

11-38-400M 400’ X 1/2” Big Buddy

11-38-500M 500’ X 1/2” Big Buddy

11-38-600M 600’ X 1/2” Big Buddy

11-38-800M 800’ X 1/2” Big Buddy

11-38-1000M 1,000’ X 1/2” Big Buddy

11-38-1500M 1,500’ X 1/2” Mega Buddy

9-25-300M 300’ X 3/8” Good Buddy

9-25-400M 400’ X 3/8” Good Buddy

11A-25-400M 400’ X 3/8” Good Buddy II

11A-25-500M 500’ X 3/8” Good Buddy II

11A-25-600M 600’ X 3/8” Good Buddy II

6-14-300M 300’ X 1/4” Easy Buddy

6-14-400M 400’ x 1/4” Easy Buddy

6-14-500M 500’ x 1/4” Easy Buddy

9A-25-300M 300’ X 3/8” Good Buddy III

9A-25-400M 400’ X 3/8” Good Buddy III

*TO ORDER METRIC MARKED ROD, ADD “M” TO PART NUMBER WHEN ORDERING. FOR EXAMPLE, 6-14-300M WOULD BE 6-14-300MM

EXCEPTIONAL BENDING STRENGTH BUDDY® CONDUIT RODDERS

https://www.ptsupply.com/search/jameson

FIBERGLASS WILL NOT KINK BUDDY® FISH TAPES

22”22”

12.5” 12.5”

Microduct Fisher Wee Buddy® Little Buddy® Handheld With Handle On Stand With Accessory Kit Without Accessories On Stand

Features

Low profle pulling eye permanently mounted on rod to move smoothly in fber microducts as small as 6 mm. Smooth, round polymer jacket will not nick or scratch fber or duct wall.

• Round rod slides easily over wires, especially at bends • Easy-grip canister for more efcient pushing & pulling • Smooth, non-binding payout & return to canister • Snap-on accessory kit for easy access

• Operates vertically or horizontally • Drag brake & feed eye control payout

Rod Diameter 3.2 mm 1/8” 3/16”

Lengths Available 165-350’ 50-150’ 150-300’

Recommended Conduit Microduct As Small As 6 mm Conduit As Small As 1/2” 3/4” - 1-1/2”

Applications Microduct Fishing Inside wiring in occupied conduit • Home drops from hand-hole box to building • Inside and outside conduit drops

Bend Radius 1.5” 1.5” 2.5”

Pull Strength 200 Lbs. 300 Lbs

Accessories Included Pulling Eye

Accessory Kit: Small & Large Spring Leaders, 2 Pulling Eyes, 2 Splice Ferrules, 2 End Ferrules, Glue, Emery Cloth, Case

Pulling Eye

Accessory Kit Contents: 2 Pulling Eyes, Large Flexible Tip, Small Flexible Tip, Splice Ferrule, 2 End Ferrules, Adhesive, Emery Cloth, Pouch

Dimensions 12.5” x 2.0” 12.5” x 2.0” 12.5” x 2.0” 12.5” x 2.0”

8-18-50 50’ X 1/8” Wee Buddy - No Kit

8-18-50K 50’ X 1/8” Wee Buddy with Kit

8-18-100 100’ X 1/8” Wee Buddy - No Kit


8-18-150 150’ X 1/8” Wee Buddy - No Kit


8-18-165MDR 165’ X 1/8” Microduct Fisher

10-18-350MDR 350’ X 1/8” Microduct Fisher II, Handheld

10-18-350MDRS 350’ X 1/8” Microduct Fisher II, Stand

10-316-150 150’ X 3/16” Little Buddy Fish Tape




https://www.ptsupply.com/search/jameson

MAKING IT EASIER TO FISH & PULL CABLE

BUDDY® ACCESSORIES

Rodder Accessories

Swivel Roller Swivel Shackle SpliceEye Guide Coupling Ferrule

Good Buddy GrapplesEasy Buddy Grapples

Stinger Tip

Big Buddy Grapples All Terrain Wheel

Accessory What It Does

Swivel Eye Attach pull line or grip to freely rotating eye

Roller Guide Guide rod through bends, sweeps, wires, misalignments

Swivel Coupling Connect two rods when single length is not long enough; provides rotation when pulling line, wire or rope

Shackle Fitting Use with Swivel Eye for larger pulling loop to attach pulling eye

Stinger Tip Flexible Leaders Guide rod through bends, sweeps, misalignments

Rod Grapples Connect two rodders from opposite directions

Pulling Eye For pull line attachment to rod

End Ferrule Repair Kit Reattach ferrule to end of rod. Contents: End Ferrule, Adhesive, Emery Cloth

Splice Repair Kit Join sections of rod. Contents: Splice Ferrule, Adhesive, Emery

All Terrain Wheel Kit Makes it easier to move larger rodders. Available for Big Buddy and Good Buddy II Rodders. Contents: 2 Wheels and Axle

Fish Tape Accessories

Pulling Eye Splice Ferrule e Spring Leader Flexible Spring Leaders with Ball Easy Buddy® Accessories Good Buddy® Accessories Big & Mega Buddy® Accessories

6-14-AK Accessory Kit 9-25-AK Accessory Kit 11-38-RK Repair Kit

6-139 Swivel Eye 9-139 Swivel Eye 11-139 Swivel Eye

6-140 Splice Repair Kit 9-141 Roller Guide 11-141 Roller Guide

6-141 Roller Guide 11-142 Shackle Fitting 11-142 Shackle Fitting

Wee Buddy® Accessories Little Buddy® Accessories 6-143 Swivel Coupling 9-143 Swivel Coupling 11-143 Swivel Coupling

Flexibl

8-160 Pulling Eye 10-160 Pulling Eye 6-146 End Ferrule Repair 9-148 Rod Grapples 11-148 Rod Grapple Set

8-162 Large Spring Leader 10-162 Flexible Leader Pull Eye 6-148 Rod Grapple Set 9-25-12ST 12” Stinger Tip 11-25-6ST 6’ Stinger Tip

8-163 Small Spring Leader 10-163 Flexible Leader Ball Tip 6-160 Pulling Eye 9-25-24ST 24” Stinger Tip 11-25-8ST 8’ Stinger Tip

8-140 Splice Repair Kit 10-140 Splice Repair Kit 6-162 Flexible Leader 9-140 Splice Repair Kit 11-140 Splice Repair Kit

8-146 End Ferrule Repair Kit 10-146 End Ferrule Repair 6-14-BAG Zippered Bag 9-146 End Ferrule Repair 11-146 End Ferrule Repair

8-18-AK Accessory Kit 10-316-AK Accessory Kit 6-14-COV Cover 11A-AWK AT Wheel Kit GB2 11-AWK All Terrain Wheel Kit

Microduct Fisher Accessories

8-146MDR Pulling Eye Repair Kit

8-140MDR Splice Repair Kit

https://www.ptsupply.com/search/JAMESON

RAINBOW TECHNOLOGYSpecialists in Utility Chemicals & Safety Items

®

Fiber Optic Cleaning Products Rainbow offers a variety of products designed to aid in the cleaning of fiber optic splices in both individual products and easy-to-use kit form.

• Safe for use on all types of fiber • Minimal static-generating wipes • Lint-free and non-abrasive design • Pure optical-grade cleaning solution • Prepackaged kits available • Have everything needed with no waste

Maintaining the proper cleanliness of these delicate fibers is crucial to their operation. Use Rainbow’s wipes, solutions and swabs to keep your fiber optic cables clean and in optimal operating condition. Below is an assortment of our Fiber Optic Cleaning Products.

Fiber Optic Cleaning Products

4002 4006 4008 4010 4011

4012 4015 4016 4023 4028

#4015

#4010 and #4016 #4002 #4012 #4011

#4023 #4006 #4008 #4028

https://www.ptsupply.com/manufacturer/rainbow-technology

People who work outdoors are in particular risk from the harmful rays of the sun. The sun’s rays can damage your skin throughout the year, not just in summer. Snow and ice are powerful reflectors of the sun’s rays. Pay special attention to protecting your nose, hands, and ears - even your scalp if you have thinning hair.

UTILITY SUNSCREEN is a SPF 30 formula that gives all day protection. It is also greaseless and waterproof. Because UTILITY SUNSCREEN is NOT greasy, it does NOT affect your grip on tools

®

RA

INB

OW

UTILITY SUNSCREEN SPF 30+

4022 PRODUCT:

THE BASICS:

APPLICATIONS:

UTILITY SUNSCREEN

40223 40230


®

and equipment.

Protecting the skin with UTILITY SUNSCREEN helps prevent sunburn, skin cancer, and premature aging associated with frequent and lengthy sun exposure.

UTILITY SUNSCREEN has been thoroughly tested and found to be safe on rubber lineman’s gloves per ANSI/ASTM D120, ASTM D412, ASTM D471.

UTILITY SUNSCREEN is available in a 4 oz bottle (4022), a 2 oz. spray pump bottle (40223) and a single-application pouch (40230). This product is packaged with 100 pouches per disposable wall-mount dispenser box.

Use UTILITY SUNSCREEN year round to protect the skin from the harmful rays of the sun. Apply to any skin that has frequent or prolonged sun exposure including:

• Arms • Hands • Scalp • Ears • Neck • Face • Nose

Single-Application Pack #40230

4-oz. Bottle #4022

2-oz. Pump Bottle #40223

FEATURES

Specially formulated for the utility and telecommunications industries

HOW YOU BENEFIT

One application gives maximum sun protection and lasts all day

Greaseless formula Will NOT interfere with handling tools, will NOT harm rubber gloves

Waterproof Resists excessive sweating and wiping

PABA-free formula No allergy problems

Broad-spectrum UVA and UVB protection Maximum protection


WEED KILLER is a granular product that requires no mixing. Unlike liquid products which can drift with the wind, this herbicide stays where you put it. Pre-measured 8 oz mylar bag is odor proof, water proof, and burst proof.

This non-selective product controls a wide range of annual and perennial weeds, grasses, and other vegetation where it is applied. Because WEED KILLER is a soil sterilant, it can be applied during any season of the year to kill existing plants or to prevent weed growth.

Plants absorb this systemic herbicide through the roots, causing them to die from the inside out. WEED KILLER contains one ingredient for deep-rooted vegetation and another for shallow-rooted weeds. This two-part formula results in elimination of weeds around telecom and utility equipment for one growing season.

Controlling weeds is one of the easiest ways to reduce fire hazards, rodents, insects, and the corrosion that attacks outdoor equipment. When sunlight can reach the equipment, moisture dissipates quickly and there is less corrosion. It also increases visibility of equipment and utility closures preventing damage by mowers and vehicles.

FEATURES HOW YOU BENEFIT

Application lasts for one growing season

Increases visibility of equipment

Use around ground-mounted equipment

Reduces maintenance activity to one application each year

Equipment easily located. Protects equipment from damage due to mowers and vehicles

Clean environment for working on equipment. Protects equipment from damage due to fire and corrosion. Eliminates nesting sites for snakes, rodents, wasps, and other pests.

®

RA

INB

OW

WEED KILLER PRODUCT:

THE BASICS:

APPLICATIONS:

WEED KILLER

4037 4037S 4037P

Use WEED KILLER for general weed control around:

Buried cable closures Cross-connect boxes Power substations Telephone booths Transformer pads Utility poles Guywires Fire plugs


®


Baygon® , the active ingredient, has repellency properties to help keep insects away from equipment.

This time-release product is designed to slowly release insecticide for years inside telecommunications and utility equipment - even when sensitive electronics need to be protected. This unique product KILLS existing infestation and PREVENTS future infestation.

Apply INSECT TAG inside aerial closures and terminals, pole-mounted equipment, customer premise equipment, cable closures, terminal boxes, telecommunications, power and utilities, electronics, street lighting, computers, railroad systems, municipalities, security and smoke alarms, traffic control systems, network interface devices, meter boxes surge protectors, various OEM equipment, and outdoor equipment or contained areas. One application repels and kills insects around the clock.

Using a cable tie, attach the 1 3/4” x 2 7/8” INSECT TAG at or around entry points where insects will be killed or repelled as they attempt to enter equipment.

®

RA

INB

OW

INSECT TAG 4049

PRODUCT:

THE BASICS:

APPLICATIONS: Use INSECT TAG to prevent nesting, repel and to kill these insects:

INSECT TAG


Time-release system

Protects equipment and personnel

Non-corrosive and non-conductive

Long-lasting insecticide

Controls and kills insects in telecom and utility equipment and other areas indoors and outdoors. Prevents infestation.

Reduced maitenance. Prevents service interruptions and injury to personnel caused by stinging and biting insects.

Easy to apply to aerial and pole-mounted equipment closures and surfaces and sensitive electronic equipment.

Provides continuous control for up to three years.

Ants Bees Fire Ants Hornets Roaches

Spiders Wasps Waterbugs Yellow Jackets


®



®

®

PRODUCT:

THE BASICS:

RA

INB

OW

WASP & ANT KILLER is very effective any time dangerous insects threaten the safety of personnel in utility, telecommunications, industrial, or commercial applications.

fast-acting ingredients. Tetramethrin provides quick knockdown of flying insects. WASP & ANT KILLER is a solvent-based product that contain three powerful

WASP & ANT 4335WASP & ANT KILLER

KILLER

Permethrin is a long-lasting residual insecticide and provides killing power. PBO is a synergist, which makes the insecticides even more effective.

The forceful spray pattern delivers a high percentage of the formula to the target site from a safe distance of 12-15 feet. The spray button’s high launch angle of 15° makes it easier to hit the target. Unique locking mechanism keeps the spray button in place and ready to use.

WASP & ANT KILLER is effective in many areas including inside pad-mounted transformers as well as around and inside pull boxes and meter boxes. It is safe to use around high-voltage equipment and all types of telecommunication equipment.

Use Insect Probe (4357) for ant Quick and effective insect mound treatment. knockdown plus long-lasting

killing power

12-15 feet spray pattern.

Safe to use around high-voltage equipment

FEATURES

Contains 3 powerful, fast-acting active ingredients

HOW YOU BENEFIT

Quick and effective insect knockdown plus long-lasting killing power

Effective 12 to 15 foot spray pattern Employee can effectively saturate target from a safe distance

High dielectric strength: 47,300 Volts Employee safety because of reduced probability of electric shock


● ● ●

● ● ●

● ● ●

● ● ●

● ●

FIRE ANT & INSECT KILLER is non-conductive and non-corrosive, making it safe for equipment and personnel. The new patented formula contains a waterproofing agent to prevent caking which keeps areas inside treated equipment “free breathing” or from retaining moisture.

This multi-use granular insecticide is ideal for long-lasting control of fire ants and other insects in and around telecom and utility equipment. FIRE ANT & INSECT KILLER provides years of control in and around equipment such as pedestals, cross-connect boxes, CATV boxes, buried cable, pad-mounted electric transformers, substations, and underground vaults.

®

RA

INB

OW

FIRE ANT & INSECT KILLER

4480 PRODUCT:

THE BASICS:

APPLICATIONS:

FIRE ANT & INSECT KILLER

4483 4484 4490


®

The 4 oz single application bag treats a 12” x 12” area. These premeasured bags are odor-proof, waterproof, burst-proof, and easy to use. The 2.1 and 6 lb shaker containers with adjustable dispenser lids are an ideal choice for pretreating construction sites for pad-mounted equipment.

Use FIRE ANT & INSECT KILLER for long-lasting control of: Ants Fleas Sowbugs Black widow spiders Millipedes Ticks Brown recluse spiders Roaches Waterbugs Crickets Scorpions Soil infesting insects Fire ants Silverfish

FEATURES

Very high level of active ingredients

HOW YOU BENEFIT

Provides long-lasting results for many years depending on application

Protects equipment and personnel from insect damage and injury

Reduces maintenance time, expenses, and personal injuries

Non-corrosive and non-conductive SAFE for equipment and personnel

Packaged in single application containers Convenient and easy to use with no mixing or measuring

Available in 2.1 and 6 lb shaker container with adjustable dispenser lid

Ideal choice for pretreating pad-mounted equipment and for broadcast applications of large areas


This powerful insect repellent provides long-lasting protection against gnats, mosquitoes, biting flies, chiggers, ticks, flying insects, and fleas. Applied to exposed skin and non-FR clothing, JUNGLE FORMULA INSECT REPELLENT keeps insects from biting.

JUNGLE FORMULA INSECT REPELLENT is even effective against the ticks that carry Lyme Disease, Rocky Mountain Spotty Fever, and West Nile Virus.

® R

AIN

BO

W

JUNGLE FORMULA INSECT REPELLENT

4501 PRODUCT:

THE BASICS:

APPLICATIONS:

JUNGLE FORMULA INSECT REPELLENT

4508


®

This long-lasting product is specially formulated to meet the needs of the utility and telecommunication industries. It prevents unsafe insect distractions and repels persistent biting and piercing insects. Do not use on FR Clothing.

JUNGLE FORMULA INSECT REPELLENT will not harm people, the environment, or utility and telecom equipment. Apply it to non-FR clothing or the surface of the exposed skin to prevent insect bites. Always read and follow the directions on the label.

Use JUNGLE FORMULA INSECT REPELLENT TOWELETTE combined with Rainbow’s Tick & Mosquito Repellent for FR Clothing (4507) to provide the ultimate protective barrier against biting, disease carrying insects.

Use JUNGLE FORMULA INSECT REPELLENT as a multi-purpose repellent which protects crews from biting insects including:

● Mosquitoes ● Ticks ● Biting flies ● Chiggers ● Fleas ● Flying insects ● Gnats

FEATURES

Contains extra-strength DEET formula 25% aerosol spray and 30% towelette

HOW YOU BENEFIT

Reduces risk of Lyme Disease, Rocky Mountain Spotted Fever, and West Nile Virus

Multi-purpose repellent provides maximum personal protection

Repels gnats, mosquitoes, biting flies, chiggers, ticks, flying insects, and fleas

Handy 6 oz can or towelette Convenient, easy to carry, quick and easy application

Safe on rubber goods Safe for use according to label directions


Because our spray contains one of the most powerful active ingredients, it quickly knocks down flying and stinging insects. This superior solvent-based product is SAFE for use on and in utility and

88500 TELCO & POWER WASP & ANT SPRAY

With ETOC®

With ETOC®


®

®

PRODUCT: TELCO & POWER WASP & ANT SPRAY

TELCO & POWER WASP & ANT SPRAY with ETOC® EXCEEDS the strictest wasp

threatening - reactions to bites and stings. Using this long-range spray also helps avoid injuries while trying to escape from insect attack.

spray specifications ever developed. Many people have highly allergic - even life-THE BASICS:


Contains a powerful, fast-acting active ingredient

Effective 12 to 15 foot spray pattern

Very high dielectric strength (48.1 kV) and high flash point (>200ºF)

Safe for use with plastics such as ABS, Noryl, Polycarbonate, and Polyethylene. Also safe on rubber elbows and cable joint compounds

Quick and effective insect knockdown

Employee can effectively saturate target from a safe distance

Employee safety because of reduced probability of electric shock

Will NOT damage equipment

telecom equipment.

The high-output spray pattern delivers a high percentage of the formula to the target from a safe distance of 12 to 15 feet. The actuator or spray button is designed with an upward angle of 15 degrees to make it easier to hit the target. A unique locking mechanism keeps the spray button in place and ready to use.

TELCO & POWER WASP & ANT SPRAY with ETOC® has the highest dielectric strength (48.1 kV) available to ensure greater safety when working around medium to high voltage. This is especially important considering the common practice of utilities and telecoms sharing poles.

with ETOC® does NOT crack and craze plastics used in utility and telecom equipment. (Bellcore) UNLIKE VIRTUALLY ALL OTHER WASP SPRAYS, TELCO & POWER WASP & ANT SPRAY

Telcordia and NEETRAC testing show it to be safe for plastics. When metals were tested per (Bellcore) Telcordia specifications, TELCO & POWER WASP & ANT SPRAY with ETOC® was found to be non-corrosive. In additional NEETRAC testing, this insecticide product has been safely tested on rubber elbows and cable joint compounds.


● ● ●

● ●

● ● ●

● ● ●

● ●

● ● ●

● ●

● ● ●

KNUCKLES TOWELS are rough and abrasive on one side allowing the user to scrub embedded, tough-to-clean contaminants such as cable filling compounds, icky pic, c-cement, tar, asphalt, heavy greases, etc; however, the other side is smooth which works to trap and absorb the cleaner and dirty contaminants back into the towel, leaving hands, tools, and equipment surfaces clean.

KNUCKLES HAND & TOOL CLEANING TOWELS are specially formulated to dissolve and absorb dirty contaminants from hands, tools, and equipment.

®

RA

INB

OW

HAND & TOOL CLEANING

79315 PRODUCT:

THE BASICS:

APPLICATIONS:

Each light and portable dispensing bucket contains 80 shop-sized, ready-to-use,

KNUCKLES HAND & TOOL CLEANING TOWELS

79316


®

premoistened towels.

KNUCKLES HAND & TOOL CLEANING TOWELS will not harm rubber lineman’s gloves.

These shop-size, durable towels quickly remove tough-to-clean substances including: ● Adhesives C-Cement Lubricants Wax ● Asphalt Dirt Oils ● And more

Cable Jelly Heavy Grease Paint Carbon Icky PIC Sealants Caulk Ink ● Tar

After cleaning your hands, use the KNUCKLES HAND & TOOL CLEANING TOWELS to clean: Equipment Painted Surfaces ● Tools Work Surfaces

Fiberglass Plastics ● Trucks Metal Tool Boxes Vinyl

Before After

FEATURES

Large, premoistened towel in a handy dispenser bucket

HOW YOU BENEFIT

Convenient, portable, waterless one-step cleaning system

Superior hand, tool, and equipment cleaner

Multiple uses

Removes most contaminants found in utility and telecom industries

A single product cleans hands, tool, and other equipment in one easy step

Compatible with rubber gloves Will NOT break down dielectric rating or values



®

4636 Intent White

®

PRODUCT: WATER-BASED

Intent White Marking Paint Excellent for use in marking construction areas, excavation sites, traffic safety, athletic sites, survey

RA

INB

OW

THE BASICS: crews, utility line, buried cables, and much more. May be used on asphalt, concrete, gravel, dirt, and grass. Unique upside-down spray system for application versatility. High solids formula produces a highly visible coating. Lead-free, VOC compliant formula. Coating lasts approximately 30-90 days, depending on environmental conditions.

• MARKING PAINT contain high solids formulation for bold, bright, visible marking thus reducing cut cables, service interruptions, and power outages.

• Highly pigmented industrial solids have been filtered through exclusive 50 micron filters for non-clogging, trouble-free spraying. One-coat coverage and our spray-through cap allow for inverted painting ease.

• Fast drying, high-solids formula penetrates and adheres to hot surfaces such as concrete, brick, pavement, and asphalt.

• Convenient spray-through cap and non-clogging tip.

• VOC compliant, lead-free, and biodegradable.

• Both APWA and fluorescent colors are available in water- and solvent-based formulations.

Available in all APWA colors - please inquire.

FEATURES

Paint filtered through exclusive 50 micron filter

HOW YOU BENEFIT

Non-clogging, trouble-free spraying

Fast-Drying, penetrates and adheres to hot surfaces

Long-lasting

VOC compliant - lead-free Safe for the environment and employees, biodegradable


Excellent for use in marking construction areas, excavation sites, traffic safety, athletic sites, survey crews, utility line, buried cables, and much more. May be used on asphalt, concrete, gravel, dirt, and grass. Unique upside-down spray system for application versatility. High solids formula produces a highly visible coating. Lead-free, VOC compliant formula. Coating lasts approximately 30-90 days, depending on environmental conditions.

®

RA

INB

OW

WATER-BASED

Communications Orange MarkingPaint

4629 PRODUCT:

THE BASICS:

Communications Orange


®

• MARKING PAINT contain high solids formulation for bold, bright, visible marking thus reducing cut cables, service interruptions, and power outages.

• Highly pigmented industrial solids have been filtered through exclusive 50 micron filters for non-clogging, trouble-free spraying. One-coat coverage and our spray-through cap allow for inverted painting ease.

• Fast drying, high-solids formula penetrates and adheres to hot surfaces such as concrete, brick, pavement, and asphalt.

• Convenient spray-through cap and non-clogging tip.

• VOC compliant, lead-free, and biodegradable.

• Both APWA and fluorescent colors are available in water- and solvent-based formulations.

Available in all APWA colors - please inquire.

FEATURES

Paint filtered through exclusive 50 micron filter

HOW YOU BENEFIT

Non-clogging, trouble-free spraying

Fast-Drying, penetrates and adheres to hot surfaces

Long-lasting

VOC compliant - lead-free Safe for the environment and employees, biodegradable


FITSD103C $4,800 (discounted pricing) $904.50 IN STOCK

FiberChek™ Probe Microscope The essential fiber tool for every technician!

The FiberChek probe builds on industry-leading Viavi expertise in fiber inspection to deliver an all-in-one handheld for technicians at every skill level. Meeting all fiber-inspection needs with built-in image viewing, auto-focus, pass/fail analysis, and result storage and recall, the FiberChek probe completely automates inspection workflows to ensure fast and accurate performance. Used alone or connected to other devices (via WiFi and USB), the FiberChek probe is the essential fiber tool for every technician.

Fully Autonomous Inspection with an All-in-One Solution With FiberChek, technicians get a complete fiber-inspection solution in the palm of their hand. There is no need to connect to other devices to inspect, test, or store. All of those capabilities, and more, are already built into the FiberChek probe.

y An integrated touch-screen display shows live images and analysis results with easy navigation

y With automated end-face analysis built-in, FiberChek lets technicians test and certify to industry standards at the push of a button

y Easily navigate and select your desired acceptance criteria including IEC-61300-3-35 standards or customer-specific requirements

y Store, name, and recall test results directly on the instrument

Benefits

y Achieve fully autonomous inspection with an all-in-one solution

y Automate inspection workflows

y Ensure accurate and fast test performance

y Easily access connections anywhere

y Connect with other Viavi instruments and mobile devices

Features

y Integrated touch screen with live fiber viewing

y Auto-center

y Auto-focus

y Built-in fiber end-face analysis

y User-selectable acceptance profiles

y Stores results on device or exports

y Connects via WiFi and USB W

HI

LE

S

UP

PL

IE

S

LA

ST

https://www.ptsupply.com/manufacturer/VIAVI-SOLUTIONS

WFED3000AC1PCC $3,475 (discounted pricing) $523.86 IN STOCK

WiFi Advisor™

The first wireless LAN analyzer built for installers at all skill levels

End users depend on WiFi to reliably deliver premium services such as video OTT and IPTV to endpoints throughout their homes. However, non-WiFi interference, competing WiFi networks and channels, and the exploding number of WiFi clients often hinder WiFi performance. As a result, 50% of all trouble calls are now WiFi related. Technicians who install and maintain WiFi in the home require robust installation methods and rapid, intuitive troubleshooting capabilities that even a WiFi novice can use.

The WiFi Advisor consists of a host application (running on an iPad, Android tablet, or the Viavi OneExpert platform) and one or more WFED-300AC test devices. It is the first test solution to meet the needs of technicians at all skill levels. Providing a new, visually rich approach to testing, its intuitive capabilities enable rapid characterization, optimization, and troubleshooting of highly changeable and vulnerable home WiFi networks. It shows a whole-home view of real WiFi performance margin and can deliver easy-to-understand information directly to the end customer.

Troubleshooting and Optimization

Troubleshooting, Optimization, and Site Assessment

Key Benefits

y Improves QoE, reduces trouble calls and repeats

y Reduces mean-time-to-repair

y Assesses a wide range of end-user device classes

y Educates customers about true performance

y Enables test conformance and repeatability across your workforce

Key Features

y Site performance report educates customers

y TrueMargin™ optimizes WiFi site throughput

y Intuitive and easy user interface recommends best channel and optimization steps

y Highly-configurable radio supports 2.4 G 802.11b/g/n and 5 G 802.11a/n/ac up to 3x3 with MIMO

y Associates job- or work-ticket information with site assessment results for export to StrataSync for storage and analysis

Applications

y WiFi troubleshooting and optimization

y Whole-home WiFi performance mapping and throughput analysis

y Wireless IPTV service installation

y End-user education

WH

IL

E

SU

PP

LI

ES

L

AS

T

Access point Station StrataSync™

WiFi link under test


Handheld ModularFiberChek™ Probe

TB20TDRTK3C $8,200 (discounted pricing) $3,090.37 IN STOCK

T-BERD®/MTS-2000

Test Set Fiber Optic Multitest Tool for Smarter, Faster Microscope Field Testing

The essential fiber tool for every technician!

Costs, workflow, quality, network performance, and customer Key Benefits y Certify the fiber physical layer on FTTx/ experience are critical for the success of today’s fiber optic PON, access, metro and enterprise networks

networks. Selecting the right test tools has become key y Ensure the highest-quality connectorizing, splicing, and turn-up of new fiber links

The FiberChek probe builds on industry-leading Viavi expertise in fiber inspection to deliver an all-in-one handheldtoward meeting these needs. The Viavi Solutions™ T-BERD/

y Improve workflow with hands-free solution, MTS-2000 is a handheld multi-test platform that provides driving best practices to IEC standardsfor technicians at every skill level. Meeting all fiber-

y Smarter and faster field testing with simple field technicians with a single handheld unit to install, turn- setup and instantaneous pass/fail results inspection needs with built-in image viewing, auto-focus, up and maintain these networks to the highest standards. y Boost productivity with improved report

generation and flexible connectivity pass/fail analysis, and result storage and recall, the FiberChek

Its innovative design and hands-free bag ensure that all essential fiber test tools are close at y Decrease OpEx and increase field probe completely automates inspection workflows to ensure hand, whatever the job or location. A large color screen with graphical user interface drives productivity when combined with

StrataSync™, cloud-enabled software that fast and accurate performance. Used alone or connected to simple operation and optimal workflow in the field. displays assets, modules, versions, and locations; maintains accurate instrument Test capabilities include a range of OTDR modules for multimode and single-mode testing, other devices (via WiFi and USB), the FiberChek probe is the configuration and setup; and, provides as well as a range of FiberComplete™ modules for automated insertion loss/optical return visibility into instrument utilization and essential fiber tool for every technician.

Loss (IL/ORL), and fault finding. Both OTDR and FiberComplete modules are passive optical test-data management network (PON) optimized. The unit is also ready for connector end face pass/fail analysis to IEC standards with a digital analysis microscope.Fully Autonomous Inspection

Applications y High-visibility touch-screen display

The PON power meter and CWDM-OSA modules also enable turn-up and troubleshooting of y Field-installable modules with an All-in-One Solution PON and coarse wavelength division multiplexing (CWDM) networks. y Wide range of OTDR modules including

Quad and PONWith FiberChek, technicians get a complete

FiberChek probe.

fiber-inspection solution in the palm of their hand. There is no need to connect to other devices to inspect, test, or store. All of those pass/fail analysis

y Optional built-in optical power meter, visual capabilities, and more, are already built into the fault locator (VFL), and optical talk set

y New-generation lithium polymer (LiPo) battery for 8-hour operation

y An integrated touch-screen display shows y Flexible connectivity with Ethernet, USB,

live images and analysis results with easy Bluetooth®, and WiFi capabilities navigation y Special hands-free bag standard

y Cross-compatible with T-BERD/MTS-4000 y With automated end-face analysis built-in,

FiberChek lets technicians test and certify to industry standards at the push of a button

y FiberComplete automated IL/ORL, PON power meter, and CWDM analyzer

y Automated fiber inspection and IEC

Bene

y

y

y

y

y

F

y

y

y

yW

HI

LE

S

UP

PL

IE

S

LA

ST

y

y

y


Digital Services Activation Meter (DSAM) DSAMH0METECH1PKG42C

$4,050 (discounted pricing) $1,017.56 IN STOCK

WH

IL

E

SU

PP

LI

ES

L

AS

T


0NXCATVTECH1C $8,750 (discounted pricing) $1,319.06 IN STOCK

OneExpert CATV A full-featured handheld for technicians at any skill level

OneExpertTM CATV helps field technicians fix problems right— the first time. A technician-friendly interface and OneCheck™ automated tests ease complex tasks with a simple dashboard that shows clear pass/fail results. And its future-proof modularity ensures years of use supporting CATV networks.

Comprehensive Tools Increase Productivity Benefits We built expertise into OneExpert so that technicians atFiberChek™ Probe y Simplifies and speeds testing and any skill level can quickly optimize performance. With a

troubleshooting modular platform that adapts easily to rapidly changing

y Improves compliance and audit performanceMicroscopetechnologies, OneExpert CATV is:

y Reduces rework y Simple — Auto channel identification eliminatesThe essential fiber tool for every technician!y Turns any technician into an expert

channel plan build, maintenance, and deployment Features overhead and enables automated testing without the

potential for channel plan related test failures y Real-time channel identification eliminates the need for channel plans and plan-related errors

y Fast — OneCheck uses powerful processing and The FiberChek probe builds on industry-leading Viavi y 32x8 DOCSIS® 3.0, DOCSIS 3.1, WiFi, 1 Gigabit

exceptional speed to make more complete testing Ethernet capable, and TrueSpeed™ option expertise in fiber inspection to deliver an all-in-one handheld practical: a tech can run a comprehensive test, y Field-exchangeable DOCSIS/RF module including MER and BER on all channels, in about

for technicians at every skill level. Meeting all fiber-y A unique dual-diplexer design supports

a minute 42/85 or 65/204 MHz networksinspection needs with built-in image viewing, auto-focus, pass/fail analysis, and result storage and recall, the FiberChek

y Powerful — More intelligent, powerful algorithms y WiFi 2.4/5 GHz, Bluetooth, StrataSync™ enabledprobe completely automates inspection workflows to ensure running in the background while testing enables the y Simultaneous ingress and downstream testingfast and accurate performance. Used alone or connected to meter to point out any problems and suggest next y Optional fiber scope and power meter other devices (via WiFi and USB), the FiberChek probe is the troubleshooting steps y Optional ISDB-T Moduleessential fiber tool for every technician.

Applications y Troubleshooting QAM carriers/home networksFully Autonomous Inspection y Verifying WiFi in 2.4 GHz and 5 GHz networkswith an All-in-One Solution y Turning up business services Now with With FiberChek, technicians get a completey Testing Gigabit DOCSIS servicesfiber-inspection solution in the palm of their DOCSIS 3.1 y Installing PON/RFoG including inspection,hand. There is no need to connect to other

power levels, and RF performancedevices to inspect, test, or store. All of those y Optional IP video testingcapabilities, and more, are already built into the

FiberChek probe. y Optional home leakage testing WH

IL

E

SU

PP

LI

ES

L

AS

T


The SmartOTDR™

Solution Affordable, easy-to-use handheld testing for techs at any level

The lightweight and compact SmartOTDR solution performs all essential fiber tests for metro and access networks with:

OTDR measurements

• Fiber inspection with automated end-face analysis

• Optical loss testing (optical light source and optical power meter)

• Visual fault location

With a tailored interface for different skill levels, it speeds and optimizes field testing for any technician.

Key Benefits

y Combines all essential fiber tests in one handheld with visual fault locator (VFL), optical power meter (OPM), and p5000i microscope options

y Simplifies OTDR analysis with Smart Link Mapper (SLM) option

y Upgrades easily in the field

y Automates testing with objective, pass/fail results

y Enhances productivity anywhere with powerful network connectivity

Key Features

y Single-/dual-/tri-wavelength versions with 1310, 1550, and in-service 1625 nm wavelengths

y Light, compact, hands-free design includes 5” high-visibility outdoor touchscreen

y Integrated CW light source

y PON optimized to test through a 1x128 splitter

y Automated fiber inspection and macrobend detection with pass/fail analysis software

y 3G/4G connectivity via USB, Bluetooth/ WiFi

y 3-year warranty

y All-day battery life


Data Sheet

/MTS-5800 All-in-one handheld network and fiber testing

The T-BERD®/MTS-5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations.

VI T-BERD/MTS-5800

, and ging

The industry’s smallest handheld instrument can test throughout the service life cycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.

Key Benefits y Simplifies multitechnology testing with an all-in-one dual-

10 G handheld

y Optimized for field use with a multitouch screen, scripted workflows, and clear results

y Supports efficient best practices with repeatable methods and procedures with Job Manager guided workflows

y Speeds fiber characterization, Ethernet service activation, and troubleshooting

Key Features y Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH,

Fiber Channel, CPRI/OBSAI, eCPRI, and OTN support

y Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564

y Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™ TCP throughput testing

y Timing/Synchronization testing with PTP, SyncE, and 1 PPS, 2 MHz and 10 MHz Wander

y Compatible with VIAVI 4100-Series OTDR, FiberComplete, and COSA modules with Smart Link Mapper™, fiber microscopes, and optical power meters

Applications y Mobile and backhaul characterization, validation, and

troubleshooting

y Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces

y Fiber link characterization and troubleshooting

y Installation and maintenance of OTN and legacy SONET/ SDH and TDM/PDH networks

y Remote radio head (RRH) testing at the wireless basestation, including CPRI 1-9 rates

y PIM and interference testing over optical links (RFoCPRI)

y Next generation Fronthaul eCPRI support


Visual Fault Locators Optical Fiber Damage/Break Locator

Whether installing or troubleshooting, the Visual Fault Locator (VFL) is an essential tool that quickly and easily locates problem areas in fiber cables. By pinpointing the exact location of fiber damage, technicians can diagnose, troubleshoot, and fix the problem efficiently. The VFL is also used for conducting continuity tests and performing fiber identification.

Viavi Solutions offers two unique versions of the VFL that are economically priced and ergonomically designed for comfortable handling and portability. Both versions are equipped with a 2.5 mm interface and are compatible with connectors such as SC, ST, and FC, while the 1.25 mm adapter enables connection to LC and MU connectors. The VFL emits a bright red laser beam (Class II), making the light escaping from the damaged fiber easily visible from a distance. The Continuous/Flash control button lets operators choose between continuous or flashing illumination.

Fiber Troubleshooting & Verification

Key Benefits y Easy-to-use

y Quickly and easily locate damage in optical fiber

y Continuous and Flashing illumination modes

y Economically priced

y Ruggedized and designed for demanding field use

y Long-lasting battery life

y Protective rubber end cap

Key Features y Compact, ergonomic design for ultimate

portability

y Visible wavelength is 650 nm

y High powered laser (1 mW) for single-mode (> 7 km) and multimode (> 5 km) connectors

y Continuous or Flash illumination

y Universal connector interface for quick and easy connection

y 2.5 mm connector input (1.25 mm adapter available)

y Includes soft-sided carrying case with belt loop

Applications y Locate sharp bends, breaks, and damages

in fiber

y Conduct end-to-end continuity tests

y Perform fiber tracing and identification Red illumination indicating fiber damage/bend


T O O L S , T E S T & S A F E T Y F E AT U R E D S U P P L I E R S

FOR MORE INFORMATION, PLEASE CONTACT YOUR POWER & TEL REPRESENTATIVE

800.238.7514 | [email protected] | www.ptsupply.com

https://www.ptsupply.com/category/Tools-and-Safety

tools, test, and safety | power & tel

Documents