tools for glass professionals - veribor||fipa|orobica ...today the brand names silberschnitt,...

Tools for Glass Professionals

2

The Bohle private brands.During the more than 80-year history of the company, numerous product brand names originated under the company name Bohle. Today the brand names Silberschnitt, Veribor, Diamantor and Verifix represent entire product types within their areas of application.

The Bohle Group is Europe's leading manufacturer and supplier of tools, machinery and accessories for glass processing, glass finishingand picture framing. The family business, founded in 1923, is now represented by over 300 employees at fourteen locations in Germanyand abroad. Divided into the eight product divisions Handling, Glass Cutting, Glass Bonding, Glazing, Tools, Machinery, Fittings andFraming, the total product range is precisely tailored to the respective customer groups from trade, industry and retail. Quality is theleading principle at Bohle - in every area. To live up to this standard, the company develops and manufactures many products themselves.A modern logistics centre quickly dispatches the ordered goods to the customer.

This is Bohle.

Bohle is close to the customer.Bohle is an international company - with German roots. The products are exported to almost every country in the world; exports accountfor over 60% of business. In order to best recognize requirements which vary from market to market, Bohle is close to the customer: with two German locations, eleven foreign subsidiaries and over 100 agents worldwide.

3

Art. No. BO 101.0

Art. No. BO 102.0

Art. No. BO 102.1

Art. No. BO 400.0

Art. No. BO 410.0

Art. No. BO 100.0

Art. No. Description

BO 401.135 Turret

BO 02B135 Spare Wheels, box of 10 pcs.

BO 02B135H Spare Wheels, box of 100 pcs.

6 cutting wheels made of alloyed steel and tempered by a patented method guarantee high cutting quality and long service life. Turrets and cutting heads arenickel plated. An oil-soaked felt ring supplies lubrication for wheels and axles. The handle is produced exclusively from ecologically controlled and approvedkinds of wood. The SILBERSCHNITT glass cutters are particularly economicalbecause wheels and turrets are replaceable. This cutter is suitable for general cutting requirements of glass with a thickness of 3 to 10 mm. Straight edgestand-off distance 2.5 mm, cutting angle 135°.

Suitable for all SILBERSCHNITTglass cutters as well as circle cutters BO 501.0 and BO 510.0 - 516.0

With carbide wheel ø 5 mm · cuttingangle 135° · for glass cutters BO 400.0and BO 410.0

Ergonomically shaped, plastic handleespecially suitable to cut tiles requiringhigh cutting pressure · replaceable,tempered turret with one carbide wheel5 mm · cutting angle 135° · straightedge stand-off distance 2.5 mm

Wooden handle · replaceable, tempered turret with carbide wheel Ø 5 mm · especially selected carbidemetal guarantees high wear-resistance· especially suitable for thick or hardglass · straight edge stand-off distance2.5 mm

Stainless steel · specially tempered · for all SILBERSCHNITT glass and circle cutters · each practical dispenser contains 10 doz.

Spare Wheels

Spare Turret with 6 Steel Wheels

Spare Turret

Carbide Glass and Tile Cutter

Carbide Glass Cutter

Stainless steel · specially tempered · suitable for all SILBERSCHNITT glassand circle cutters · special packing: indozens on a needle in a plastic bag

Spare Wheels Glass Cutter

The Classics - Set Standards Around the WorldThe 100 cutter - proven a million times over and known worldwide. The most sold glass cutter in the world.

4

Transverse Handle for Glass Cutters

Wheel HoldersOil Glass Cutters Series 2000

Art. No. BO 2045.0


BO 2000.S STANDARD 145° cutting angle for standard cuts up to 6 mm glass thickness

BO 2000.M MASTER 155° cutting angle for cutting shapes and glass of 6-12 mm glass thickness

BO 2000.P POWER 158° cutting angle for cutting thick glass from 12 mm upwards

Art. No. Cutting angle / glass thickness (rec.)

BO 2449.0 120° / 2 - 3 mm

BO 2449.1 127° / 2 - 4 mm

BO 2449.2 135° / 2 - 6 mm

BO 2449.3 140° / 4 - 8 mm

BO 2449.4 145° / 6 - 10 mm

BO 2449.5 150° / 6 - 12 mm

BO 2449.6 155° / 6 - 15 mm

BO 2449.7 158° / 10 - 19 mm

BO 2449.8 160° / 19 - 25 mm

BO 2449.9 165° / 19 - 25 mm

BO 2449.10 Set with all 10 cutting angles

BO 2449.12 Set with 3 cutting angles (145°, 155°, 158°)

For SILBERSCHNITT 2000 oil glass cutters and circle cutters · different cutting angles for different glass thicknesses

Toplife cutting wheel with extremely long service life · ball-bearing, 360° freelyrotating cutting head with trailing cutting wheel · exchangeable wheel holderswith different cutting angles for all requirements · separate application of cuttingfluid not necessary due to integrated tank · 2-valve technology for regulated, efficient oil flow · optimum control of cutting pressure with the ergonomic handle· straight edge stand-off distance 6 mm

Ergonomic transverse handle for optimum application of higher cuttingpressure · can be fitted to the metalmodels of SILBERSCHNITT glass cuttersof series 2000, 4000 as well as Art. No.BO 447.8 and BO 448.8 · individuallyadjustable to hand size

Cut Glass like a ProfessionalThis unique oil glass cutter is the basis of the Silberschnitt 2000 System. It can be configured individually and is therefore ideal for complicated applications - whether for thick or thin glass, shaped or straight cuts. By simply exchanging the cutting heads with different angles, you are set anytime for any requirement.

5

Cutting Heads Oil Glass Cutter

Oil Glass Cutter

4000 Oil Glass Cutter


BO 448.8 with wide cutting head

BO 447.8 with narrow cutting head


BO 4010.0 wide plate

BO 4010.1 narrow cutting head

BO 4010.3 wide cutting head, “Active plus” grind


BO 441.0 30° swivelling cutting head

BO 441.2 fixed cutting head

Original TOPLIFE quality at an especially good value for money · brass handle with finger grip · wide cutting head · stand-off distance to straight edge 2.5 mm· cutting angle 138°


BO 4000.0 brass, wide head, 5 in a box

BO 4000.1 brass, narrow head, 5 in a box

BO 4000.0E brass, wide head, individually packed

BO 4000.1E brass, narrow head, individually packed

BO 4000.0EA brass, wide head, individually packed, “Active Plus” grind

With replaceable cutting head · carbidecutting wheel · cutting angle 138° · stand-off distance to straight edge2.5 mm · solid brass model with rubbercollar · 30° swivelling cutting head · (option: BO 2045.0 transverse handle)

For all SILBERSCHNITT oil glass cutters · wide or narrow plate · cuttingangle 138°

With replaceable, wide cutting head· high-quality carbide cutting wheel · cutting angle 138° · stand-off distanceto straight edge 2.5 mm · plastic handlewith transparent oil tank · solid brassfinger grip · traditional shape

Oil Glass Cutters - Optimum Cut at Low CostThe combination of the Silberschnitt Toplife carbide cutting wheel with unsurpassed service life, the light-weight, anti-abrasive coated cutting headmade of a special metal alloy, the integrated tank with innovative oil flow technology and the literal Silberschnitt quality makes these cuttes a firstchoice - at an extraordinarily attractive price!

BO 4001.0 plastic, wide head, 5 in a box

BO 4001.0E plastic, wide head, individually packed

BO 4001.1 plastic, narrow head, 5 in a box

BO 4001.10E plastic, narrow head, individually packed

6

Glass Cutter Carbide Glass Cutter

Jobo Glass Cutter JOKRA Glass Cutter

2000 Strip Cutter2000 Special Glass Cutter

Art. No. BO 2004.0

Art. No. BO 360.0Art. No. BO 320.0

Art. No. BO 260.0Art. No. BO 200.1

Art. No. Stopper

BO 2005.0R right

BO 2005.0L left

Toplife cutting wheel · blue plastic handle · can be placed underneath thecut to break the glass · extremely light-weight cutting head of special alloy · very smooth cutting · for glass 2-6 mmthick · cutting angle 138° · straightedge stand-off distance 2.5 mm

6 replaceable cutting wheels made of special, high quality steel, straightedge stand-off distance 2,5 mm

6 cutting wheels made of special steel,round wooden handle, straight edgestand-off distance 2,5 mm

For efficient cutting of equally wideglass strips · adjustable strip width(max. 2 cm) · for right or left handers,cutting angle 138°

All-metal · ball-end · with a speciallywear-resistant carbide wheel · cuttingangle 135° · straight edge stand-offdistance 2.5 mm

Rounded wooden handle · with onesteel wheel · straight edge stand-offdistance 1.5 mm · cutting angle 130°

Still Not Found Your Personal Favourite?Apart from providing you with top quality, we also want you to feel comfortable when working with our glass cutters. Here you find a range of different models and designs to find your personal favourite.

7

Thick Glass Cutting Kit in Aluminium Case

Glass CutterGlazier’s diamond

Easy Grip Carbide Glass CutterGlass Cutter, MetalAll-metal · ball-end · with one steel wheel · straight edge stand-off distance 2.5 mm

Art. No. BO 230.0

carbide cutting wheel 120° · for opalescent or hard glass

Heavy duty model

Art. No. BO 110.0

for glass thickness 3-12 mm

Art. No. BO 50 055 00


BO 428.0 integr. guide f. cutting along straight edges

BO 424.0 length adjustable

BO 427.2 Spare cutting head, 120°

BO 427.3 Spare cutting head, 135°

Cutting Thick Glass - Made So EasyCutting thick glass is continuously gaining importance. However, it may cause problems depending on the glass quality and the expectations on thefinished piece. The solution: Innovative Bohle products for thick glass processing. For cutting and opening cuts, for straight or shaped cuts - here youfind everything you need.

This kit contains all necessary tools for cutting circles and straight cuts in glass upto 25 mm thick and with a max. ø of 120 cm. For 25 mm glass we recommendwheel holder BO 2449.8 with 160° and glass tapper BO 710.1.Oil glass cutter BO 2000.P POWER and practical aluminium carrying case included.

The set contains the following articles: (All items also available separately.)


BO 2000.P SILBERSCHNITT 2000.P POWER Oil Glass Cutter

BO 2045.0 SILBERSCHNITT Transverse Handle for Glass Cutters

BO 702.0 SILBERSCHNITT Cut Running Pliers

BO 710.0 SILBERSCHNITT Cut Opening Tapper for Thick Glass

BO 521.0 SILBERSCHNITT Thick Glass Circle Cutter

BO 5002800 SILBERSCHNITT Cutting Fluid for Thick Glass

BO 5002810 Dispenser for Cutting Fluid

8

Art. No. BO 078 Art. No. BO 078.1

Art. No. BO 2720.0

Art. No. Description Quantity

BO 2000.P SILBERSCHNITT 2000.P POWER Oil Glass Cutter 158° 1 piece

BO 2045.0 SILBERSCHNITT Transverse Handle for Glass Cutters 1 piece

BO 5002800 SILBERSCHNITT Cutting Fluid for Thick Glass 1 container

BO 5002810 Dispenser for Cutting Fluid 1 piece

The set contains the following articles:

Art. No. For glass thickness

BO 710.0 10 - 20 mm

BO 710.1 15 - 25 mm


BO 704.0 SILBERSCHNITT Cut Running Pliers, 6-15 mm glass

BO 702.0 SILBERSCHNITT Cut Running Pliers, up to 25 mm glass

Art. No. Max. ø

BO 521.0 120 cm

BO 521.1 180 cm

BO 521.5 Replacement cutting head

BO 2449.7 Replacement wheel holder 158°

Heavy-duty construction provides highlevel of operational safety · cuttingangle 158° · the ball handle above thewheel holder ensures the even trans-mission of the required cutting pressurefor thick glass of 10 - 25 mm

Used with special Bohle straight edges· together with the SILBERSCHNITT2000.P POWER oil glass cutter (included), with its trailing wheel and integrated cutting fluid, excellentresults are achieved. For 25 mm glass we recommend wheel holder BO 2449.8 with 160°.

All-metal · with adjustment screw to set to individual glass thickness · optimum load transmission · also ideal to open straight cuts, corner cut-outs, etc.

Heavy-duty · all-metal construction · adjustable tapper force · controlledbreaking with clean edges · also for difficult requirements

Plastic · with 2 suction pads for securefixation · adjustable from 45 to 175 mm· corner radius 7 mm

Plastic · with 2 suction pads for securefixation · stoppers adjustable for corneror lateral cut-outs · corner cut-outadjustable from 45 to 400 mm, lateralcut-outs adjustable from 45 to 350 mm· corner radius 7 mm

Quick and Clean Cut-outs with Just a Hand CutterAvoid time-consuming drilling and sawing when making cut-outs. Bohle developed especially for this purpose cut-out kits which allow you to produce excellent results which will amaze you.

Our tip:BO 704.5 + BO 702.5 for opening very narrow strips

Template for Corner Cut-Outs Template for Corner and Triangular Lateral Cut-Outs

Cut Running Pliers

Cut Opening Tapper for Thick Glass

Thick Glass Cutting Sledge System 2000Thick Glass Circle Cutter

BO 704.5 Pressure bar, 60 x 12 mm for BO 704.0

BO 702.5 Pressure bar, 80 x 12 mm for BO 702.0

9

Shape TemplatesCut Opener

Tool Kit for Corner Cut-Outs Tool Kit for Lateral Cut-Outs

Radii TemplateTemplate for Lateral Cut-Outs

Art. No. BO 578.0 Art. No. BO 578.2


BO 078 Template for Corner Cut-Outs 1 piece

BO 027 SILBERSCHNITT Cutting Fluid 1 bottle

BO 2000.M SILBERSCHNITT 2000.M MASTER Oil Glass Cutter 155° 1 piece

BO 2449.4 Wheel Holders for Oil Glass Cutters SILBERSCHNITT 2000,145° 1 piece


BO 704.0 SILBERSCHNITT Cut Running Pliers 1 piece


Corner cut-outs can be produced quickly and effortlessly · no more troublesome drilling or sawing · reduces work load e.g. when producingtempered glass · for manually cuttingflat glass of 3 - 15 mm thicknesses· comes in a practical storage case · R = 7 mm


BO 078.2 Template for Lateral Cut-Outs 1 piece

BO 027 SILBERSCHNITT Cutting Fluid 1 bottle

BO 2000.M SILBERSCHNITT 2000.M MASTER Oil Glass Cutter 155° 1 piece

BO 2449.4 Wheel Holders for Oil Glass Cutters SILBERSCHNITT 2000, 145° 1 piece


BO 706.0 SILBERSCHNITT Cut Opener 1 piece


With adjustable template · SILBERSCHNITT 2000 oil glass cutterwith 360° revolving cutting head · unique BOHLE cut opener · easily cutsglass up to 10 mm thick · ideal for theproduction of tempered glass and shopfitting · includes case · R = 7 mm

Art. No. BO 078.2

Plastic · 2 suction pads for secure fixation · adjustable from min. 40 x 10 mm to max. 240 x 100 mm· corner radius 7 mm

Art. No. BO 078.5

With two suction pads for fixation · forradii of 10 to 70 mm · to be used withglass cutter 2000.M, 2000.P or 2000.S · stand-off distance 6 mm

Art. No. BO 706.0

For complicated cuts · ideal for openingcorner, lateral or other shaped cuts · for glass 6 to 10 mm thick · turnable pressure ring for optimum adjustmentto all cuts · max. reach 100 mm

For cutting shapes in glass · ideal forthe repair of arched glass doors andwindows · suitable for inner and outerarcs · made of flexible metal band · 40 mm wide · held in place with suction holders BO 670.5 (please orderseparately) · Recommended: 3 pcs. for 90 cm, 6 pcs. for 180 cm


BO 51 405 09 90 cm length

BO 51 405 18 180 cm length

BO 670.5 Suction holder

BO 519.5 Spare suction pad

10

Circle Cutter with Ball-bearing Cutting Head Circle Cutter with 6 Steel Wheels

Cutting FluidSystem 2000 Circle and Oval Cutter

Art. No. Max. ø

BO 510.0 40 cm

BO 510.1 17”

BO 511.0 60 cm

BO 511.1 24”

BO 513.0 100 cm

BO 513.1 40”

BO 514.0 120 cm

BO 514.1 48”

BO 515.0 160 cm

BO 515.1 64”

BO 516.0 200 cm

BO 516.1 80”

BO 101.0 Spare turret

BO 518.0 Cutting head

BO 519.5 Spare suction cup for plastic base

Art. No. Max. ø

BO 510.5 40 cm

BO 510.51 17”

BO 511.5 60 cm

BO 511.51 24”

BO 513.5 100 cm

BO 513.51 40”

BO 514.5 120 cm

BO 514.51 48”

BO 515.5 160 cm

BO 515.51 64”

BO 516.5 200 cm

BO 516.51 80”

BO 518.5 Cutting head

BO 2449.3 Spare wheel holder

Art. No. Max ø

BO 2550.0 22 - 122 cm

BO 2550.1 9“ - 48“

BO 2551.0 Extension set up to 182 cm

BO 2551.1 Extension set up to 70“

Wheels and turret can be easilyexchanged, cutting angle 135°

Precise cuts for 22 - 122 cm · for glass up to 25 mm thick using different wheelholders · minimum diameter difference 6 cm · includes oil glass cutter 2000.SSTANDARD 145°, T-handle, JOBO glass breaking device BO 705.0, cutting fluid, 2 felt-tip pens with adaptor · in practical aluminium case

For manual cutting of glass · low surface tension allows easy penetrationinto the cut · ensures a soft break · glass particles are bound · smooth run of wheel · contents: 1 litre

Trailing carbide wheel in Toplife quality· improved break quality even for smallradii · long service life · less cuttingpressure · 135° cutting angle · Smallestpossible diameter 72 mm

Practical Tip:Especially when working with thick glass, it is essential to use sufficient cutting fluid.Breaking of the scored glass will be considerably easier and thebreaking edges will be of much better quality.

High Quality Circle Cutters - a Round DealCutting circles and ovals can be a demanding task especially when cutting thick glass. Bohle offers you the right tool for your requirement.

BO 519.5 Spare suction cup for plastic base

BO 026 1 liter, for standard hand cutting

BO 50 028 00 1 liter, for thick glass cutting


11




BO 533.0 SILBERSCHNITT circle cutter

BO 518.2 Replacement cutting head

BO 415.0 Replacement wheel holder

Art. No. Cutting width

BO 4580.0 110 - 600 mm

BO 4580.1 110 - 1200 mm

BO 4580.2 110 - 1800 mm

BO 4580.5 Spare cutting head

BO 4580.6 Spare guide roller

Art. No. Max ø

BO 2511.0 60 cm

BO 2511.1 24”

BO 2511.1 24”

BO 2514.0 120 cm

BO 2514.1 48”

BO 2516.0 200 cm

BO 2516.1 64”

Art. No. Max ø

BO 530.0 30 cm

BO 532.0 60 cm

BO 518.1 Spare cutting head

BO 518.5 Cutting head for circle cutters

Our tip:Also for use with trailing carbide wheels (BO 518.5)

For precise cutting of circles · turretwith 6 steel wheels · easy mountingonto cutting table or base plate (notincluded), cutting angle 135°

The ideal circle cutter for use with theSILBERSCHNITT 2000.S, 2000.M or2000.P oil glass cutters · excellent cutting quality due to the trailingTOPLIFE cutting wheel and integratedsupply of cutting fluid · oil glass cutterand T-handle not included (please orderseparately - for art. no. please seepage 4)

For quick and easy cutting of largeglass panes · with integrated oil supply and SILBERSCHNITT cuttinghead with TOPLIFE cutting wheel · cutting angle 138°

Ball-bearing · for small circles up to 9cm ø · for glass thicknesses up to 6 mm· replaceable steel holder with SILBER-SCHNITT carbide micro wheel for smallradii, cutting angle 140°

Suitable for circles up to 34 cm ø and ovals of 2.5 to 40 cm with a max. difference between dimensions of 8 cm. The new, improved design isheight adjustable and can be set to the individual glass thickness.

Especially for cutting small, round glassparts of 10 - 185 mm ø in series · trailing cutting wheel with 155° cutting angle · different cutting anglesfor different glass thicknesses availableseparately · extension plates are available separately

Efficient cutting of glass: strips, parallelograms, mitres, diamondshapes, trapezoids, hexagons, octogons, for decorative wall lamps,star motifs, for small greenhouses, etc.

The mobile, roll-up workplace for glassartists and hobbyists · includes rubbermat, guide rail, strip and circle cutter,turret with 1 carbide cutting wheel135° and detailed instruction manual

SILBERSCHNITT Roll-up Workplace SILBERSCHNITT Geo-Master

Circle Cutter for Repetitive Cuts Circle and Oval Cutting Machine

Circle Cutter BOHLE Speed Cutter

Circle CutterSystem 2000 Circle Cutter

12

BOHLE L-Squares without Brace · grey BOHLE L-Squares with Brace · black

BOHLE Straight Edges with integrated Suction CupsBOHLE Straight Edges

Straight Edges - Indispensable in Any Glazier ShopBohle straight edges are available in different material thicknesses (4, 5 and 10 mm) as well as with or without integrated suction pads. For the fixa-tion of straight edges without suction pads, we recommend the straight edge holder Art. No. BO 670.0. All straight edges with integrated suction padsare suitable to be used with the SILBERSCHNITT cutting sledge Art. No. BO 2720.0.

Made of high-quality synthetic material· in lengths of 80 - 350 cm

Art. No. Dimensions

BO 042.0 L = 80 cm · W = 5.5 cm · T = 4 mm

BO 044.0 L = 130 cm · W = 6.5 cm · T = 4 mm

BO 045.0 L = 150 cm · W = 8 cm · T = 5 mm

BO 046.0 L = 200 cm · W = 8 cm · T = 5 mm

BO 046.1 L = 200 cm · W = 7 cm · T = 10 mm

BO 047.0 L = 250 cm · W = 8 cm · T = 5 mm

BO 047.1 L = 250 cm · W = 7 cm · T = 10 mm

BO 048.0 L = 300 cm · W = 7 cm · T = 10 mm

BO 049.0 L = 350 cm · W = 7 cm · T = 10 mm

Made of high-quality synthetic material· in lengths of 150 - 400 cm · 8 cm wide· BO 051.xxx = 5 mm thick · BO 052.xxx= 10 mm thick, thus suitable for SILBERSCHNITT Sledge for Thick GlassBO 2720.0

Art. No. Length / suction cups

BO 051.152 150 cm / 2

BO 051.202 200 cm / 2

BO 052.202 200 cm / 2

BO 052.203 200 cm / 3

BO 051.253 250 cm / 3

BO 052.253 250 cm / 3

BO 052.254 250 cm / 4

BO 052.303 300 cm / 3

BO 052.304 300 cm / 4

BO 052.354 350 cm / 4

BO 052.355 350 cm / 5

BO 052.405 400 cm / 5

These L-squares made of high qualitymaterial have two pegs made of blueplastic allowing the glass edge to befully visible when positioned. The lightgrey material provides good contrast to the black felt on the cutting table.

Art. No. Length / Short side

BO 029.00 30 cm / 17 cm · without pegs

BO 029.5 30 cm / 17 cm

BO 030.5 50 cm / 27 cm

BO 031.5 60 cm / 27 cm

BO 032.5 80 cm / 37 cm

BO 033.5 105 cm / 37 cm

BO 034.5 135 cm / 47 cm

BO 035.5 150 cm / 47 cm

BO 036.5 175 cm / 47 cm

These L-squares are manufactured inone piece from high-quality material.The integrated brace guarantees anespecially high precision.

Art. No. Length / Short side

BO 031.1 60 cm / 30 cm

BO 032.1 80 cm / 34 cm

BO 033.1 105 cm / 40 cm

BO 034.1 135 cm / 45 cm

BO 035.1 150 cm / 45 cm

BO 036.1 175 cm / 50 cm

BO 037.1 205 cm / 60 cm

BO 038.1 250 cm / 70 cm

13

Cut Running Pliers Glass Breaking Pliers

Glass Breaking Pliers Glass Breaking Pliers

Suction HolderSILBERSCHNITT Straight Edge Holder

200 mm long · jaw width 24 mm· with adjustment screw · for glassthicknesses of 3 to 5 mm · centre markon upper jaw · especially for breakingnarrow strips

With drop jaw · 180 mm long · jaw width 14 mm · lacquered black · ground head

Art. No. BO 50 088 00 Art. No. BO 50 082 18


BO 50 080 20 200 mm long

BO 50 081 18 180 mm long


BO 50 081 20 straight jaw

BO 50 082 20 drop jaw

Break, groze + nibble the Glass to the Shape you needCompletely opening and breaking the cut is best done with cut running pliers which are normally used from the end of the cut. Depending on the glassthickness and the complexity of the cut, Bohle offers different tools which guarantee excellent cutting results and breaking edges. These Bohle toolsare also suitable for shaped cuts!

Practical help when cutting long dimensions · safely secures the straightedge · precise positioning by adjustablesquare · also for positioning measuringinstruments, displays or other products· suction pad ø 55 mm

For shape template · for fixation ontoglass surface

jaw width 24 mm · lacquered black · ground head

200 mm long · jaw width 20 mm · lacquered blue · ground head


BO 670.0 Straight edge holder

BO 670.1 Straight edge holder, with height adjustment



BO 670.5 Suction holder


14

BO 719.5

BO 719.1

“ZAG-ZAG” Glass Nibbling Pliers

SILBERSCHNITT Scalloping Tool for Edge DecorationCut Running Pliers

Glass Breaking Pliers Radius Glass Breaking Pliers

Glass Grozing PliersGlass Nippers

Art. No. BO 50 095 20

Art. No. BO 50 082 25

Art. No. BO 703.01


BO 719.0 Scalloping Tool

BO 719.5 Positioning Aid

BO 719.1 Spare Bit

Art. No. Radius

BO 50 082 33 10 mm

BO 50 082 34 20 mm

BO 50 082 35 30 mm


BO 50 083 26 160 mm, jaw with width 8 mm, for glass thickness up to 8 mm

BO 50 083 27 190 mm, jaw with width 12 mm, for glass thickness up to 15 mm

With carbide jaws · lacquered · handlesplastic coated · easy nipping of smallglass parts · ideal for working on edges

Vienna shape · for precise grozing · with spring for opening jaws

For breaking glass up to 12 mm or ½” thick · 216 mm long · jaw width25 mm · handle is lacquered black

Ideal for rounding off corners of glasssheets quickly and easily before finalpolishing · precise break and long service life due to diamond-polishedjaws

For Tiffany and art glass work · forglass up to 5 mm thick · glass is brokensafely and in a controlled manner· upper pressure bar is turnable and can be adjusted to the score · pressurebar and plate also available separately

The scalloping tool from Bohle quicklyproduces a regular scallop design onflat glass edges - without the need for expensive machinery. The tool is suitable for glass thicknesses of 3 to 25 mm

“ The red one” · the all-purpose tool for universal Tiffany and mosaic work· with spring joint and splinter bag · for correction of breaking edges onouter radii · cuts like scissors!

Art. No. BO 700.0Art. No. Description

BO 700.0 Cut running pliers

BO 7002 Round pressure plate

BO 7003.01 Pressure bar

15

Swedish design · front slanting, highlypolished continuous blade · brown, polished wooden handle · blade length110 mm · 26 mm wide

95 x 30 mm · with plastic handle

Crescent shape · light-coloured woodenhandle · blade length 100 mm

Art. No. BO 51 621 00

Art. No. BO 51 640 00

Light-coloured wooden handle · blade length 100 mm

Art. No. BO 51 023 00

Art. No. BO 51 025 00

Black, wooden handle with lead inlay · blade length 100 mm

Crescent shape · light-coloured woodenhandle · blade length 100 mm

Art. No. BO 51 025 01

Art. No. BO 51 022 00

Spear point · highly polished blade ·brown polished wooden handle · bladelength 90 mm · 26 mm wide

Art. No. BO 51 622 00

With blunt, curved, highly polished con-tinuous blade · brown, polished wood-en handle · blade tip 18 mm wide

Art. No. BO 51 626 00

Putty KnivesBohle’s range of putty knives includes all kinds of blade shapes and thus can meet every possible requirement.

Lead Putty Knife “DON CARLOS”

Lead Putty KnifeLead Putty Knife

Lead Putty KnifePutty Knife

Hacking Knife

Putty KnifePutty Knife

16

GlassBuddy USB Power Set for GlassBuddy

Glazing Shovel Glazing Shovel

Block LeverGlazier’s Knife

Measuring ToolsModern developments make new technology necessary. Our electronic measuring tools can determine the various characteristics of panes and glass units. The high-quality measuring tools in the Bohle program make it easy for the glazier to determine the glass thickness, the lay-out ofmulti-glazed units, etc.

Made of shock-proof plastic · solid· blue · easy-grip handle

Made of plastic · with wooden handle

Art. No. BO 51 654 00 Art. No. BO 51 653 01

Features of the GlassBuddy

Allows installed glass to be analyzed without being removed · measures single-pane glass up to 21 mm thick · analyzes laminated glass, insulated glasspanes and bulletproof glass to a total thickness of 50 mm · accuracy: 0.1 mm · detects coatings and their position · recognises PVB films and detects their number, thickness and position · display has three illuminated lines with scrollingfunction · memory capacity of up to 99 measurements · up to 5 comparison measurements per indivdual measurement · USB interface for reading data at your PC and for charging the battery · easy, self-explanatory menu · high quality Li-Ion battery for at least 8 hours of continuous operation

The new multi-talent for the accurate analysis of flat glass. No matter whethersingle-pane, laminated or insulated glass, whether installed or not - in secondsthe laser technology supplies information about glass thickness, configuration ofpanes, coatings and PVB films. GlassBuddy from Bohle. One device that does it all.Included in delivery: GlassBuddy · protective case · operating instructions· programme for analysis at zour PC · USB cable A/B

Art. No. BO 51 647 50

For charging the GlassBuddy at a socket or in your car · incl. exchangeable input plugsfor EU/US/GB/AU

Art. No. BO 51 647 51

Made of wood without knots · 70 mm wide

85 mm long blade · 60 mm wide · stainless steel · with plastic handle

Art. No. BO 51 655 01 Art. No. BO 51 650 00

17

Glass Thickness Gauger Glas-O-Meter

MERLIN TGI Toughened Glass Indicator Glass Coating Detector

Tin Side DetectorMERLIN LASER Measuring Tool

Art. No. Scale / instruction manual

BO 51 647 00 German / German

BO 51 647 01 English / English

Art. No. BO 51 646 10

Art. No. BO 51 649 00 Art. No. BO 51 648 00

Art. No. BO 61 648 05Art. No. Description

BO 51 646 00 Detector

BO 51 646 11 Spare tube

Plastic · indicates glass thickness also of installed windows · suitablefor double glazed units

Optical glass thickness measuringdevice · made of plastic · for measuringthe total thickness of installed windowpanes

Plastic - with leather pouch, batterycharger and detailed instruction manual- Place MERLIN TGI flat against theglass, activate indicator light by pressing “ON” button and the viewingwindow will indicate if the glass istoughened or not

For detecting and determining locationof low-E coatings on single-panes ordouble glazed units (4-10 mm glassthickness of individual panes). When checking double glazed units,measurements must be taken fromboth sides in order to determine wherethe coating is.

UV lamp for determining which side of the glass has been in contact with the tinside during float glass production · a must when bending or painting float glass

For analysing glazed units · precision-made plastic housing · laser diode withsophisticated measuring electronics · non-hazardous laser class 2/3a · press the button for instant measurements · precise measurements from only one side (independent of light) · measures glass thickness as well as air gaps of any multi-glazed unit · indicates PVB and resin layers of laminated units · battery-operated · little energy consumption · for coated glass, bullet-proof glass, multi-layered insulating glass, etc. · 12-month warranty

18

Art. No. Carrying Capacity

BO 601.1BL 120 kg parallel, suction disc Ø 120 mm





BO 614.0BL Spare suction pad for BO 603.0BL / BO 602.0BL / BO 602.4BL


BO 600.0BL 30 kg vertical, suction disc Ø 120 mm


BO 601 120 kg parallel, suction disc Ø 120 mm



VERIBOR blue line Pump-activatedSuction Lifter with Pressure Gauge, in CaseMade of sturdy aluminium · high carry-ing capacity for large and heavy loads · suitable for all materials like glass,plastic, metal, coated wood and marble· vacuum is produced by pulling thehand pump repeatedly · high degree ofsafety because vacuum can be visiblymonitored at all times

VERIBOR Suction Lifter with PrimingPump, in CaseMetal handle with comfortable synthetic coating · high carrying capacity for large loads · suitable for all materials like glass, plastic, metal,coated wood, marble, etc. · especiallyhigh degree of safety because vacuumcan be visibly monitored at all times

VERIBOR blue line Suction Lifter, 3 suction cupsFor handling loads of all kinds · advanced, high quality materials and the strong durability of aluminium combined with synthetic material is a trademark of this suction lifter · suitable for all materials like glass,plastic, metal, wood and marble · TÜV/GS safety certified

VERIBOR blue line Suction Lifter, 2-cup,Transverse HandleSuitable for all materials such as glass,plastic, metal, coated wood and marble· tested by TÜV (German technical controlling institution) and certifiedwith the GS safety sign

VERIBOR blue line Suction Lifter, 2-cup,Handle LengthwiseSuitable for all materials such as glass,plastic, metal, coated wood and marble· tested by TÜV (German technical controlling institution) and certifiedwith the GS safety sign

VERIBOR blue line Suction Lifter, 1-cupSuitable for all materials such as glass,plastic, metal, coated wood and marble· tested by TÜV (German technical controlling institution) and certifiedwith the GS safety sign · the handleallows one-handed operation and thusquick, efficient work

Bohle offers a vast range of fixation devices for almost any requirement. If you need to hold something temporarily, we can offer you the best solution. Many more models and special developments available.

Get a Grip on SafetyVERIBOR suction lifters are known world-wide for their quality and reliability. Suitable for all airtight surfaces like glass, plastic, metal, coated wood,marble etc. They make life much easier when large or awkward objects need to be handle.

VERIBOR blue line Suction Lifter VERIBOR blue line Suction Lifter

VERIBOR blue line Suction Lifter VERIBOR blue line Suction Lifter

VERIBOR Suction Lifter with Priming PumpVERIBOR Pump-activated Suction Lifter

BO 610.0BL Spare suction pad for BO 600.0BL

19


BO S0.0BL Set of two BO 600.0BL




Art. No. Carrying Capacity, Description

BO 602.2 45 kg parallel, suction disc Ø 120 mm

BO 602.22 30 kg parallel, suction disc Ø 120 mm, with articulated joints

BO 602.3 45 kg parallel, suction disc Ø 150 mm, self-attaching

BO 614.0 Replacement suction pad for BO 602.2 and BO 602.22

Art. No. Carrying Capacity, Description

BO 602.1 60 kg parallel, suction disc Ø 120 mm

BO 602.11 60 kg parallel, Ø 120 mm, stainless execution

BO 614.0 Spare suction pad for BO 602.1


BO 600.5 20 kg vertical


BO 50 001 02 Tragkuli (pair)

BO 50 001 11 Spare rubber lining, 1 set for 1 pair Tragkuli


BO 50 001 01 Tragboy (pair)

BO 50 001 08 Spare rubber lining, 1 set for 1 pair Tragkuli


BO 600.20 suction disc Ø 120 mm

BO 600.90 suction disc Ø 90 mm

Art. No. Diameter / Bore holes

BO 633.11 55 mm / 2 x M5

BO 633.13 55 mm / 2 x M5 with release nubs for easy removal

BO 650.13 36,5 mm / 2 x Ø 3,2 mm shorter holding durations

with articulated jointsUniversal suction lifter for handling allkinds of loads. Makes working withunwieldy parts quicker and moreeffective. Suitable for all materials with smooth,flat, airtight surfaces.

For handling all kinds of loads · makesworking with unwieldy parts quickerand more effective · suitable for allmaterials with smooth, flat, airtightsurfaces such as glass, plastic, metal,coated wood, marble, etc.

Carrying aid made of aluminium · for transporting all materials such as kitchen counters or dry wall sheets· the heavier the load, the stronger theclamping action · opening range 40 mm· 160 kg carrying capacity per pair

Suitable for transporting all kinds ofmaterials · the load is held firmlybetween two non-slip, rubber-linedclamps · the heavier the load, thestronger the clamping pressure · opening range up to 25 mm · 80 kg carrying capacity per pair

For attaching mounting aids and templates · suitable for all materialswith smooth, flat, airtight surfaces, e.g. glass, plastic, metal, coated wood, marble, etc. · special suctionpads available for various surfaces · threaded hole ø 6,5 mm can be varied on request

Universal suction holder for quicklyaffixing all kinds of objects such asmeasuring devices, displays, etc. · suitable for all materials with smooth,flat, airtight surfaces such as glass,plastic, metal, coated wood, marble,etc. · also suitable for constructing special holding devices

This practical case set is ideal for protecting and safely storing your VERIBOR blue line suction lifters. The set includes 2 suction lifters of the same model.

VERIBOR Suction Lifter, 1-cup,AluminiumMakes working with unwieldy partsquicker and more effective · suitablefor all materials such as glass, plastic,metal, coated wood, marble, etc. · griplever allows one-handed operation· small diameter of the suction pad(90 mm ø) allows handling of smallparts

VERIBOR Suction Holder VERIFIX Suction Unit

Glass Carrying Device Tragkuli Glass Carrying Device Tragboy

VERIBOR Suction Lifter, 2 cups, plastic VERIBOR Suction Lifter, 2 cups, plastic

VERIBOR Suction Lifter, AluminiumVERIBOR blue line Suction Lifters

20

Tool Kit

Lobosil Lubricating Spray

PVC Suction Cup

Lipping-out Tool

Guide Loops for Locking Strips

Locking StripAutomotive Weatherstrip

Made of rubber · black · illustration shows glass panel to be inserted on top (A)and body panel to be inserted at the bottom (B) · indicated bend radii (r) are minimum values · supplied in rolls of 15 mTable: all measurements in mm

Made of black rubber · width 7.5 mm · height 9.5 mm

Art. No. BO 52 102 00

Free of chlorofluorocarbon· an excellent lubricant for all rubberstrips · spray can 400 ml

Art. No. BO 30 004 99

1 set contains 1 each of no. 1 = 5 mm, no. 2 = 6 mm, no. 3 = 8 mm, no. 4 = 7 mm

Art. No. BO 53 129 00

In plastic pouch · includes lipping-outtool, filler tool with replaceable eyes,Allen key, instruction manual forweatherstrip installation

Art. No. BO 53 127 00

For mounting windscreens intoweatherstrip

Art. No. BO 53 130 00

Ø 62 mm · with connecting tube· 330 mm long

Art. No. BO 6200.05

Art. No. A · B · C · D · E · F · r

BO 52 101 01 5 · 3 · 7.5 · 18.0 · 7.5 · 8.0 · 90

BO 52 101 02 8 · 4 · 8.5 · 25.0 · 12.5 · 10.0 · 100

BO 52 101 08 4 · 3 · 7.0 · 16.0 · 7.0 · 7.0 · 80

BO 52 101 06 6 · 3 · 7.5 · 19.5 · 12.5 · 9.0 · 100

BO 52 101 09 6 · 4 · 7.5 · 19.0 · 12.5 · 9.5 · 100

Automotive GlazingAll you need when windscreens of cars need replacement.

21

VERIBOR Compact-Lift VERIBOR Compact-Lift

Dual Circuit System:These vacuum lifting units are approved for use on construction sites.

Please note:Not approved for use at construction sites.

VERIBOR Compact-Lift with Dual Circuit Vacuum System for Flat Surfaces

Mains operation:Operates on 230V · connection: CEE-plug, with coupling · vacuum display for eachcircuit: control lamps (red/green), vacuum meter · suction pad 250 x 400 mm

Function:Prior building up of vacuum by additional valves in the suction plates · suctionplates can be blocked individually · remote control for vacuum release with spiralcable · rotates 360° with lock-in positions every 90° · tilts 90° (on request alsomotor-driven)

Art. No. Carrying capacity / Number of suction plates

BO C40DW4 400 kg / 4

BO C60DW6 600 kg / 6

BO C80DW8 800 kg / 8

BO C40DW4T 400 kg / 4 motorised tilting



VERIBOR Compact-Lift for Flat Surfaces

Mains operation:Operates on 230V · connection: CEE-plug, with coupling · vacuum display: controllamps (red/green), vacuum meter · suction pad 400 x 250 mm

Function:Prior building up of vacuum by additional valves in the suction plates · suctionplates can be blocked individually · remote control for vacuum release with spiralcable · rotates 360° with lock-in positions every 90° (on request also motor-driven)· swivels 90° or motor-driven (not when rotating is motor-driven)


BO C30W2 300 kg / 2

BO C60W4 600 kg / 4

BO C90W6 900 kg / 6

BO C30W2T 300 kg / 2 motorised tilting, manual rotating



BO C30W2R 300 kg / 2 motorised tilting



VERIBOR Lifting SystemsThe VERIBOR lifting systems are available in a variety of models and equipment as well as with other practical accessories.More detailed information can be found in our brochures, which we will send you on request. Additionally, we would be happy to provide you with a quotation according to your requirements.

22

VERIBOR Compact-Lift with Dual Circuit Vacuum System for Curved Surfaces

Mains operation:Operates on 230V · connection: CEE-plug, with coupling · vacuum display for eachcircuit: control lamps (red/green), vacuum meter · suction pad 250 x 150 mm

Function:Suction plates can be blocked individually · each cross arm can slide by 320 mmand tilt · remote control for vacuum release with spiral cable · rotates 360° withlock-in positions every 90° · tilts 90° (on request also motor-driven)

Robust transporting pliers for handling all kinds of sheet material. This tool is especially safe and easy to use. With a hoisting tool, simply lift the glass transporting pliers above the plate to be transported. Thanks to its two guidingaids, the transporting pliers can be easily positioned. When placed onto the plate,a mechanism is set in motion which ensures a safe grip simply by the upwardsmotion of the transporting pliers.The spare cork liners are supplied as a mat of cork and include special adhesive.The spare rollers are suitable for all models.


BO C12DW4C 120 kg / 4 · Power supply




BO C12DA4C 120 kg / 4 · Battery operated




Art. No. Carrying capacity / Material thickness

BO 50 001 07 1000 kg / 4 - 20 mm

BO 50 001 15 1000 kg / 15 - 38 mm

BO 50 001 13 600 kg / 3 - 20 mm

BO 5000107K Spare cork liner for BO 50 001 07

BO 5000113K Spare cork liner for BO 50 001 13

BO 5000107R Spare rollers

New:Larger contact surfaces result in higher carrying safety.

Carrying AidsWhether you need lifting pliers, carrying devices, transport carriages or carrying straps, we have a selection of carrying aids which will make the transporting of goods easier and more ergonomical for you.

Dual Circuit System:These vacuum lifting units are approved for use on construction sites.

Glass Transporting Pliers

VERIBOR Compact-Lift

23

Art. No.

BO 53 009 00 230 Volt

BO 53 009 01 110 Volt

BO 53 009 02 Pneumatic

Art. No. Dimensions

BO 50 656 00 1650 x 40 mm

BO 50 656 01 1650 x 80 mm

BO 50 655 00 Cross carrying strap

Art. No. Grit

BO 50 075 12 120 / N125

BO 50 079 22 220 / N74

BO 50 079 36 360 / N40


BO 51 051 50 3 mm thick, on roll

BO 51 051 60 4 mm thick, on roll

Art. No. TG 070

Art. No. BO 50 075 00

Art. No. BO 50 075 01

Easily and invisibly removes surface scratches from glass · removes scratchesfrom flat as well as curved glass, both convex and concave · almost without water· no distorsions in the glass · saves money, since window panes don’t need to beremoved or transported

Heavy-duty linen · with hand slings· leather chafe protection

Smooths and grinds glass edges, ceramic, granite etc. · can be used wet or dry · excellent, long-lastingabrasive capacity · firm grinding area · 100 x 57 x 30 mm

For removing glass splinters on cuttingtable surfaces · indispensable for everyglazier

Latex coated · firm grip · with canvasgauntlet · size XL

Latex coated · firm grip · with knittedgauntlet · size XL

Available in dimensions of 16.2 x 17.5 mm · punched on rolls of 10,000

More Useful Products

Cork Protector Pads with Adhesive FoamAbrasive Diamond Hand Pads

Glass Carrying Gloves

Carrying Strap

Glass Carrying Gloves

Chip BrushScratch-A-Way

24

VERIFIX Bonding Unit for Metal Parts

VERIFIX Light TunnelVERIFIX Bonding Table

Art. No. BO 55 004 20

Art. No. BO 55 004 00

Art. No. BO 55 003 50

The multi-functional VERIFIX bonding table is an innovative piece of equipmentallowing easy and efficient bonding of metal to glass. Whether in furniture orglass door production: With this device, developed and produced by Bohle, metalbonding parts are positioned to flat glass with an unsurpassed repeat accuracy.Even different metal parts, e.g. two hinges and a lock, can be mounted in just oneoperation. Any shape and size of glass pane is suitable to be worked on.

Load capacity up to 150 kg · table can be expanded, if required · can easily be integrated into existing production lines · minimised adhesive consumption· extremely short cycle times · optimal combination with light tunnel BO 55 003 50

With this professional bonding unit Bohle provides a totally new, highly flexibleand precise unit ideally suitable for industrial UV-bonding. Wherever a pneumaticconnection is available, metal parts can be precisely positioned and bonded ontoglass - with high repeat accuracy. The application of the adhesive is also mucheasier: The innovative vacuum technology prevents any air bubbles from formingwhen the adhesive is applied.

Innovative vacuum technology (registered for patent) for trouble-free application of adhesive without air bubbles · cleaning is reduced to a minimum · designed formetal adapters up to a diameter of 85 mm · vacuum adapter for larger bondingparts available as accessory

When UV-bonding, uncompromising quality is of highest importance. Apart from using high quality adhesives, it is just as crucial to ensure a high qualityof the final cure. With the new VERIFIX light tunnel this important parameter is guaranteed - with the shortest possible cycle times and tailored to the shape of the glass panes and bonding positions.

Four groups of UVA lamps can be switched on variably · illumination is targetedexactly where needed · homogeneous illumination level and long service life oflamps · on request with motorised drive · optimal supplement for bonding table BO 55 004 20

Industrial Glass BondingThe technological leadership of Bohle in the field of glass bonding is based on profound, longtime Know-How with the major advantage of expertiseand experience from many different aspects of glass processing. For industrial glass bonding, Bohle has developed a new product range which, withinnovative tools for the automation of bonding processes and intelligent accessories, allows efficient and, at the same time, precise serial production.

25

UV Bonding Kit for Beginners Basis Kit for UV Bonding

Professional UV Bonding Kit Professional Kit

Art. No. BO 52 094 20 Art. No. BO 52 094 23


BO 55 003 02 Standard kit

BO 55 003 03 Export kit with 230 V lamp

BO 55 003 04 Export kit with 110 V lamp


BO 55 003 01 Export kit (without cleaner)

BO 55 003 03 Standard kit (with cleaner)

Professional Kit with VERIFIX Fixation Devices and UV Lamp

Professional kit for UV bonding. Ideally suited for the construction of showcasesand glass furniture.

The kit includes: 1x BOHLE special glass cleaner 250 ml · 1x glass scraper · 10x spare blades with back · 1x steel wool, fineness 00 · 100 g UV adhesive B 665-0 · 100 g UV adhesive B 682-T · 100 g UV activator LF 52 093 66 · dispensing needles: 1x ø 0.41 mm, 1x ø 0.58 mm, 2x ø 0.84 mm, 2x ø 1.37 mm · 2x adaptors for dispensing needles · 100 g UV adhesive B 678-0 · 100 g UV adhesive B 690-0 · 1x UVA Star “Light”, 230 V · 1x VERIFIX angle suction holder, short, 90° · 1x clamp for glass thicknesses 3-10 mm · 1x clamp for glass thicknesses 6-19 mm · 4x eccentric stop, ø 55 mm · 2x VERIFIX pump-activated angle suction holders · 10x disposable gloves · 1x case incl. insert · 1x instructions for use

The special cleaner is not included in the kits for export!

Professional UV Bonding Kit with UV Hand Lamp 250

Professional kit for UV bonding. Ideally suited for quick and efficient bonding of glass to metal and small projects.

The kit includes: 1x UV hand lamp 250W · 1x “Systainer” case · 1x UV adhesive B 682 · 2x adaptors f. dispensing needles · 2x ea.: dispensing needles ø 0.84mm/1.37mm · 1x steel wool · 1x glass scraper w. spare blades

Case with UV lamp, for small bondingprojects · thin-bodied UV adhesives,crystal-clear and coloured, allow theproduction of small glass objects andthus an introduction to this fascinatingtechnology. Contents: 1 UVA hand lamp BO 5209440 · 20 g UV adhesive B 665-0crystal clear · 10 g each of B 665-0 inred · yellow and blue · 1 glass scraper · 1 steel wool · 1 dispensing needle0.33 mm · 1 adapter for dispensing needles · 2 disposable gloves · 1 carrying case

The “Beginner Kit” is suitable for users who need to bond glass onlyoccasionally - or want to try thistechnology at low cost · packed in a practical plastic caseContents: 1 UVA lamp H9 · 100 g UVadhesive B 682-T · 1 adapter for dispensing needles · 1 dispensing needle 0.84 mm · Bohle special glasscleaner 250 ml · 1 glass scraper · 10 spare blades · steel wool · carrying case

Glass Bonding Kits

26

Art. No. Version

BO 52 094 04 230 volts, 250 Watt · white light

BO 52 094 15 230 volts, 250 Watt · black light

BO 52 094 07 Replacement fluorescent tube

BO 55 003 30 110 volts, 60 Hz, 250 Watt, white light

Art. No.

BO 55 003 10 UVA hand lamp


Art. No.

BO 52 094 70 230 volts

BO 52 094 75 110 volts, 60Hz


Art. No.

BO 52 094 50 UV hand lamp


Art. No. BO 55 003 20

Art.-No. BO 55 003 00

Practical Tip:Leave the lamp turned on whilst working - frequent switching on andoff reduces the service life considerably. The lamp is best rested in atilted position (never put the lamp face down when it is still on) on alight-absorbing surface.

For use with short bonding distances · short curing times · UVA wave length 315 - 400 nm · integrated time meter· spacers as protection against overheating · integrated cooling fan · special filter screen · the professionalUV hand lamp for serial bonding ofmetal parts

For curing UV adhesives · 230 volts · 100 watts · with filter screen · ideal for bonding metal parts

Effective work length 570 mm · output 45 watts · white light· especially light-weight due to separate transformer

230 volts / 50 Hz ·power output 9 watts· double fluorescent tube (white light) · effective work length 110 mm · withmirror reflector · transformer in mainsplug

Effective work length 490 mm· 230 volts · output 30 watts · whitelight · fluorescent tube cannot bereplaced

For measuring the intensity of UV hand lamps · measuring range 0-200 mW/cm²

UV Lamps and AccessoriesBohle offers a comprehensive range of UV hand lamps and UV fluorescent tube lamps which meet most requirements. All Bohle UV lamps have been especially developed to be optimally suited for Bohle UV adhesives. They are especially easy to handle and have a long service life.

UV Hand Lamp H9 UV Measuring Device

UV Hand Lamp UVA-Star “Light” UVA Star “Economy“

UVA Hand LampUVA Hand Lamp UVAHAND 250

27

Art. No. Contents

BO 52 093 24 1000 g

BO 52 093 21 250 g

BO 52 093 00 100 g

BO 52 093 27 20 g

Art. No. Contents

BO 52 093 62 1000 g

BO 52 093 60 85 g

Art. No. Contents

BO 52 093 72 1000 g

BO 52 093 70 85 g

Art. No. Contents

BO 52 093 96 1000 g

BO 52 093 95 250 g

BO 52 093 94 100 g

BO 52 093 93 20 g

This UV adhesive is crystal-clear and thin-bodied (low viscosity). It displays very good capillary properties allowing it to be applied from the outside and penetrating into the gap of pre-assembled parts by itself. This adhesive is usedwhen looks are extremely important, e.g. in the construction of showcases, glassfurniture, etc. It is particularly suitable for bonding glass to glass. The adhesive´slow viscosity makes time-consuming reworking unnecessary, so that it can beapplied rapidly and most economically.

This UV-curing adhesive is crystal clear and has medium viscosity. It shows goodcapillary properties with glass up to 6 mm. Due to its elasticity, this adhesive isideal for bonding many different material combinations. It also has the capacity to absorb vibrations in the bonding joint. Especially interesting, however, is itssuitability for bonding laminated safety glass, where the PVB film absorbs much of the UVA radiation. Because this adhesive has the ability to cure with justdaylight, it reacts with less intensive radiation.

This UV-curing adhesive is crystal clear, has medium viscosity and shows goodcapillary properties with glass up to 6 mm. Due to its elasticity, this adhesive isideal for bonding many different material combinations and for surface bonding up to 1 m². Especially worth mentioning is its good moisture resistance. Whenbonding thermoplastics you should always do intensive testing first because notall thermoplastics can be bonded without problems.

This UV-curing adhesive is transparent and has medium viscosity. The adhesivehas no capillary properties and must therefore be applied to the bonding surfaceprior to assembling the parts. Due to the very high final strength of this adhesive,it is especially suitable for statically and dynamically demanding bonds.Glass/metal bonds succeed especially well with this adhesive. Many othermaterials can also be bonded with this adhesive: apart from metal and, of course,glass, it is also suitable to bond stone, wood and a variety of thermoplastics toglass. As not all thermoplastics can be bonded, prior trials are always recom-mended when working with these materials. The adhesive B-682-T also reactswithout UV exposure when used with Bohle UV- Activator LF (Art. No. BO 52 09365/BO 52 093 66) (e.g. for coloured glass, metal/metal bonds, etc.). When activator is used, slight yellowing of the bond can occur.

UV Curing AdhesivesModern technology made the development of adhesives possible which just a few years earlier nobody would have dreamt of. Originally developed as a castmaterial for the electronic industry, UV curing adhesives were found to be suitable for durable, stable bonds of many different materials such as glass-glass oder glass-metal. For this purpose, Bohle developed a large range of UV adhesives and is today known as the technology leader also in the field of glass bonding.

UV Adhesive B 665-0 UV Adhesive B 682-T

UV Adhesive BOHLE B-678-0 “Lamifix” UV Adhesive B 690-0

28

VERIFIX UV Adhesive HV 770 Dispensing Needle Set with Adaptor

VERIFIX UV Adhesive MV 750Verifix UV Adhesive LV 740

Art. No. BO 52 093 19

Set of one adaptor with 5 dispensing needles of different diameters(0.33 mm · 0.41 mm · 0.58 mm · 0.84 mm · 1.37 mm)

Art. No. Contents

BO MV75025 250 g

BO MV75010 100 g

BO MV75002 20 g

The UV-curing adhesive Verifix MV 750 is a high viscosity, slightly paste-like adhe-sive and, due to its adhesive properties, is suitable for universal applications.It is extraordinarily strong as well as tension-compensating, thus making it idealfor glass-to-metal, but also glass-to-glass bonding. Its optical clarity and durableresistance to yellowing is exceptional. Also especially worth mentioning is itsgood resistance to moisture. The main fields of application for Verifix MV 750 areobjects or glass constructions subject to static as well as dynamic forces.

This UV-curing adhesive is a low viscosity adhesive and, due to its extremely goodcapillary action, is exceptionally suitable for bonding glass to glass or toughenedglass to toughened glass. It is especially distinguished by its high bondingstrength coupled with good elasticity. Its special composition makes the Verifix LV 740 optically clear and provideslong-term protection against yellowing. This adhesive is used when looks areextremely important, e.g. in the construction of showcases, glass furniture, etc.

Art. No. Contents

BO LV7401K 1000 g

BO LV74025 250 g

BO LV74010 100 g

BO LV74002 20 g

The UV/ daylight-curing adhesive Verifix HV770 has high viscosity and can therefore bridge small fissures up to a maximum of 0.9 mm. Especially interesting,however, is its suitability for bonding laminated safety glass.The PVB film absorbs almost all of the UVA radiation. Because this adhesive hasthe ability to cure with just daylight, it reacts with less intensive radiation.When bonding thermoplastics you should always do intensive testing first because not all thermoplastics can be bonded without problems.

Art. No. Contents

BO HV7701K 1000 g

BO HV77025 250 g

BO HV77010 100 g

BO HV77002 20 g

29

Paper Towel Dispenser Disposable Gloves, Latex

Steel Wool Glass Scraper

Bohle Special CleanerBohle Professional Glass Cleaner

Art. No. Contents

BO 51 078 00 1 litre

BO 51 078 01 25 litres

Art. No. Contents

BO 51 416 05 Cardboard roll of 100 g

BO 51 416 01 Cardboard roll of 200 g

BO 51 416 02 Spool of 5 kg

Art. No. Contents

BO 51 079 10 250 ml atomizer, refillable

BO 51 079 11 1 litre refill

BO 51 079 10 27 litres refill container


BO 51 410 00 Glass scraper

BO 51 410 01 Spare blades with reinforced back

Art. No. BC 50 503 00

Ideal for all glass and mirror surfaces · prevents fresh smudging · no streaking· biologically degradable · available in25-litre containers or 1-litre spray bottles without propellants · with thepurchase of one carton (=12 bottles), 3 spray heads are included

Fineness no. 00 · top quality · long-fibred · tough · good grip· excellent polishing and grindingability · highly elastic and uniform· easily divisible strands

White metal tubing · for paper towelrolls BO 51 416 04 · roll of paper towelsis not included · also suitable for wallmounting

Ideal for cleaning prior to glass bondingor sealing. The Bohle special cleanercleans and degreases glass, metal,ceramic and rubber. The special composition of the cleanerensures a very thorough cleaning.

Metal · with blade protection · plastichandle · exchangeable blades · 40 mmwide · for loosening hardened UV adhesive residues from glass surfaces · also for hard-to-reach corners

Protect against possible skin irritationsor allergic reactions when using various chemicals · box of 100 gloves· size L (8-9)

CleaningTo achieve an optimal bond, the correct cleaning is of great importance. Surfaces to be bonded have to be completely clean, free of grease and absolutely dry. On the following pages you will find a product range which is suitable for surface cleanig.


BO 51 416 08 Paper Towel dispenser

BO 51 416 04 Roll of Paper Towels, 2-ply

30

Properties of Adhesives at a Glance

UV Adhesive Viscosity in mPas atapprox. 25° C

Finalconsistency

Tensile/shearstrength**

Bondline gap Max. allowablecontinuoustemperature*

Temperaturerange -peak values

Colour

B 665-0 80(low)

very hard 23 N/mm2 0.04 - 0.2 mm 50° C -40 to +120° C crystal clear

B 682-T 900(medium)

very hard 26 N/mm2 0.1 - 0.5 mm 50° C -40 to +140° C transparent

B 678-0 600(medium)

elastic 9 N/mm2 0.06 - 0.3 mm 50° C -40 to +100° C crystal clear

B 690-0 600(medium)

elastic 9 N/mm2 0.06 - 0.3 mm 50° C -40 to +100° C crystal clear

LV 740 100(low)


MV 750 7000(thixotrope)


HV 770 5700(high)


31

Properties Application fields Bonding materials(listed according to priority)

Storage / shelf life inoriginal container

very good capillary action for the efficient production ofglass furniture

glass to glass cool, dry, dark location(without UV radiation) /note expiration date on bottle

good tension compensationsuitable for activator

especially for glass/metalbonding in furnitureproduction

glass to metal, glass to glass,toughened glass to toughened glass,glass to: stone, wood, div. plastics

cool, dry, dark location(without UV radiation) /note expiration date on bottle

high vibration resistancemoisture resistantalso daylight curingnon-yellowing

especially for bondinglaminated glass as well as glasstypes with low UV light trans-mission (e.g. coloured glass)

laminated glass to: glass, laminatedglass, metal, stone, wood, diverseplastics, glass which stronglyabsorbs UV light


high vibration resistancemoisture resistantnon-yellowing

for bonding various materialcombinations as well as for bonds subject to high humidity

ideal for surface bonding up toapprox. 1m²

glass to glass, toughened glass to toughened glass, glass to: stone, wood, metal,diverse plastics


good capillary actionmoisture resistantnon-yellowingtension compensating

for the efficient production ofglass furniture requiring highstrength, also under difficultclimate conditionseasy clean-up

glass to glass, toughened glass to toughened glass


high vibration resistancemoisture resistantnon-yellowing

for constructions subject to high static loads, also under difficultclimate conditionsespecially for glass/metalbonding in furniture production

glass to metal, glass to glass, toughened glass to toughened glass,glass to stone, glass to wood, glass to diverse plastics


surface dry after curingalso daylight curingmoisture resistantnon-yellowing

especially for bondinglaminated glass as well as glasstypes with low UV light trans-mission (e.g. coloured glass)

laminated glass to: laminated glass,metal, glass, wood, diverse plastics, two-dimensional decorative objects


*The maximum allowable continuous temperature shows the maximum temperature at which the cured adhesive is not irreversibly damaged. With increasing temperatures, however, the maximum strength steadily decreases.

** When recommended minimum and maximum layer thicknesses are observed, the tensile/shear strengths listed in the table can be achieved.

32

Angle Suction Holder 90° Eccentric Suction Stopper

Pump-Activated Angle Suction Holders, Set Angle Suction Holder 90°

Angle Suction Holder, infinitely 45° to 300°

Clamping Device for 3 - 10 mm GlassPump-activated Angle Suction Holder


BO 638.0 VERIFIX pump-activated angle suction holder

BO B0187 Sealing ring for angle suction holder


BO 631.1 with 2 suction pads

BO 631.2 with 4 suction pads

Art. No. Glass thickness

BO 636.0 3 - 10 mm

BO 636.1 6 - 19 mm

Art. No. BO 638.9

Art. No. BO 630.2

Art. No. BO 630.3

Art. No. Sizes

BO 637.1 Ø 70 mm, 20 mm high, pad Ø 55 mm

BO 637.2 Ø 47,5 mm, 20 mm high, pad Ø 36,5 mm

Set of two, in a case - As these positioning aids are mostly used inpairs, they are supplied as a set in arobust case ensuring that your precioustools are well protected.

VERIFIX Angle Suction Holder 90°Bracket Length 200 mm and 127 mmHolding and positioning device made of 2 suction discs (ø 120 mm) with special sealing lip, adjustable +/- 12mm · can be fine adjusted toeach other · with aluminium guides

VERIFIX Clamping Device for 3 - 10 mm GlassTwo forked endpieces which rotate360° with connecting profile and plastic pressure screws for locking into place · especially suitable forspecial aquarium construction

VERIFIX Angle Suction Holder, infinitelyadjustable from 45° to 300° Positioning aid with two suction pads(Ø 120 mm) and special sealing lip · suction pads adjustable +/- 12 mm · can be fine adjusted to each other · sturdy plastic arms are 194 mm longand connected to each other by a joint

VERIFIX Angle Suction Holder 90°Bracket Length 400 mm and 280 mmHolding and positioning device made of2 suction discs (ø 120 mm) with specialsealing lip, adjustable +/- 12 mm · canbe fine adjusted to each other · withaluminium guides

VERIFIX Eccentric Suction StopperEccentrically arranged, flat plastic discø 70 mm · 20 mm high · with integratedsuction pad ø 55 mm · suitable for use when bonding floors or shelves inshowcases · can also be used in pairsfor fine adjustment of straight edges

For constructing: glass cases and aquariums - shelving and glass cabinets withhorizontal or vertical partitioning walls - display cabinets for shops, fairs, etc. · also suitable for non-porous surfaces such as plexiglass, laminated panels, etc. · exact 90° positioning

Fixation DevicesOne of the most important aspects when bonding glass is to ensure the parts are not moved during the exposure to the UV light. As this is basically impossible to do by hand, these fixation devices are ideal helpers.

33

Hinges

Shelf Supports

Locks

Furniture Feet

Dampers

Castor Rollers

... many more to see on www.bohle.de

UV Bonding HardwareGlass has always been used when building furniture. Optically especially attractive are all-glass constructions with sophisticated stainless steel hardware. Bohle offers a wide range of high quality fittings where you will find just the right one for your taste.

34

Instructions for Use for Glass Bonding with UV-Curing Adhesives

1. Material Selection (check suitablility of adhesive):The choice of glass you plan to use and the adhesive appropriate for that glass (see item 3 below) results in different bond strengths.Technical data about strength, etc. can be found in the preceding table.The indications refer to transparent, UVA light-permeable float glass. Clear float glass, mirrors (front side) tempered glass and smooth, flatwired glass can be bonded without problems. Special glass may lead to lower strength values or cannot be bonded at all. Problematic is allstructured glass, like patterned glass or wired glass. The UVA light permeability depends on the glass thickness and the colour intensity of theglass.Please note: Glass with high UV absorption like laminated glass or coloured glass cannot be bonded with common UV adhesives. For these applications, only the highly sensitive Bohle adhesives Verifix HV 770 or „Lamifix“ are suitable.Tip: When bonding glass to metal, it has been determined by comprehensive series of tests that stainless steel is an especially suitable material.

2. Preparing the Bonding Surfaces2.1. Cleaning· Bonding surfaces must be absolutely clean, free of grease and dry (free of separating agents).· Use appropriate cleaners when UV bonding (without tensides or separating agents).· Common glass cleaners are not suitable in most cases!· Recommended: Bohle special cleaner Art. No. BO 51 079 10.2.2 Warming· Adhesive as well as parts to be bonded must be at room temperature.· In order to obtain a durably stable bond, it is essential to heat parts prior to bonding in order to remove any possibly non-visible condensate.

All bonding parts must be slowly and evenly heated to avoid any tension build-up in the later bond.· Temperature: approx. 30°C above room temperature· Use hot air unit or blow dryer.

Disregarding any of these recommendations may lead to considerable loss of strength, in some cases not immediately noticeable.2.3. Pyrosil® Surface Pre-treatment· The additional pre-treatment of problematic surfaces with the PYROSIL® technology results in durably higher adhesion as well as better

resistance to moisture infiltration of the bond. This is especially important for high load-bearing bonds.

3. Choosing the Right AdhesiveDepending on the requirement of the bonding materials, applicable loads, and intentions of use of the finished object, different Bohle UV-curing adhesives are available for your tests.Remember: Glass/metal bonds: For bonds subject to dynamic loads, only medium viscous Bohle UV adhesive B 682-T or Verifix MV 750 should be used.Glass/glass bonds: When planning an all-glass construction, a „closed“ (i.e. self-stabilising) construction should always be strived for in orderto obtain the highest possible stability (see illustrations). Elastic adhesives such as B-678-0 and B-690-0 are only suitable for „closed“ constructions. Should design reasons ask for an „open“ construction or can a „closed“ construction not be realized for other reasons, onlyadhesives Verifix LV 740, B 665-0, Verifix HV 770, Verifix MV 750 or B 682-T must be used.

Open Construction Closed Construction

35

4. Positioning AidsFor optimum curing of the UV adhesive, it it essential to prevent bonding parts from sliding out of place. Nevertheless, bonding parts shouldbe fixed in position and not jammed tightly against each other. This task is considerably facilitated by using suitable positioning devices of theVERIFIX product range. Your technical advisor can give you detailed information.

5. Application of Adhesive· Before applying the adhesive, it is recommended to check if bonding parts fit in their intended position. This is best done by first building the

complete construction without bonding (using positioning devices).· The adhesive should be applied within 5 minutes after having heated the parts. Should a longer period have passed, the parts should be

heated again. · Bonding should preferably be executed in horizontal position; vertical application of the adhesive may lead to problems. · Too much adhesive increases the workload for removing excess adhesive.· If the layer is too thick, the strength of the bond is reduced.· Dispensing systems allow a precise and economic application of the adhesive.5.1 Adhesive Application BEFORE Joining the PartsMedium / high viscosity adhesive (Verifix MV 750, Verifix HV 770 and B 682-T) is always applied in the shape of a caterpillar before joiningthe parts. When bonding surfaces, the adhesive is always applied before joining the parts.· When bonding horizontally, the bonding parts should be evenly and carefully lowered to avoid trapping any air bubbles.· The weight of the bonding parts is sufficient to evenly spread the adhesive over the complete bonding area.5.2 Adhesive Application AFTER Joining the PartsLow viscosity adhesive (Verifix LV 740 and B-665-0), uses capillary action to seep into the bondline gap by itself. Therefore the bonding partscan be joined before applying the adhesive. · Do not work on several parts at the same time, but build the object one step at a time.· To achieve an optimum distribution of adhesive over the whole bonding surface, the parts should be slightly lifted and lowered again

(enlarging and decreasing the bondline gap) before curing.

6. Curing (Exposure to UV Light)Curing the bonding connection is done in two steps:1. By pre-curing a working strength (approx. 30 % of the final strength) is achieved. At this stage, excess adhesive outside the bonding surfacecan easily be removed.2. After final curing, the bond is fully functional and can be put under load (after 24 h waiting period).· Use suitable UV lamp: The lamp should not be shorter/smaller than the bonding edge to avoid build-up of tensions due to uneven curing.· Position lamp as close as possible to the bonding surface during curing.· Never move parts during curing process and do not expose to vibrations (use positioning aids).· Pre-curing takes between 10 seconds to approx. 2 minutes, depending on type and efficiency of the lamp.· Remove any positioning devices and clean the object of any adhesive residues (Bohle special cleaner, glass scraper or steel wool fineness 00).· End-curing the bond: expose from 60 seconds to approx. 5 minutes, depending on the type of lamp.· Exposing the bond for a longer time has no negative or positive affects on the bond.· All Bohle UV lamps are equipped with UV filters to avoid any damage to eyes and skin. · For your own safety, you should use additional appropriate protection, for example, Art. No. BO 50 076 10 protective glasses with UV filter

and BO 50 075 10 disposable gloves. (Using appropriate protection when working with UV lamps is recommended by the Trade Association).

7. Test BondingIf you are uncertain of ideal bonding conditions, always make trial bonds:· Bond parts according to above instructions.· Test strength of the bond by subjecting it to stresses exceeding those it would normally be exposed to, e.g. impacts, tilting or sudden

movements. If necessary use tools like pliers etc.· If possible, put under load until parts disconnect or break in order to determine the load limit.· In case of problems, doubts about specific bonding conditions or any other questions, please contact our experienced staff!

Disclaimer of Liability: The preceding information as well as any technical recommendation given in writing, verbally or based on tests areprovided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to deter-mine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processingof our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are effected according to our most up-dated General Sales and DeliveryConditions.

36

Automatic Glass CuttingSILBERSCHNITT cutting wheels are available in a variety of different dimensions, cutting angles and grinds. Here you find a range of the most commonly used types. All wheels are made of high quality carbide metals, are accurately manufactured with high precision machinery and convince by excellent cutting results and long service life.

Type 06 66 05 04 12 02D in mm 2,5 3 3 4 4,1 5

t in mm 0,65 0,65 1 1 1,08 1

d in mm 0,8 0,8 1,3 1,3 1,42 1,3

Packing unit 10 / 100 pc. 10 / 100 pc. 10 / 100 pc. 10 / 100 pc. 10 / 100 pc. 10 /100 pc.

Order Number /Cutting angle

06B000 06C000 66A000 66B000 66C000 05A000 05B000 05C000 04A000 04B000 04C000 12A000 12B000 12C000 02A000 02B000 02C000

77°90°116° 02B116 02C116

118° 02C118

120° 12B120 12C120 02B120 02C120

127° 12B127 12C127 02A127 02B127 02C127

135° 06B135 05A135 05B135 04A135 04B135 12A135 12B135 02A135 02B135

140° 06B140 05A140 05B140 04A140 04B140 12A140 12B140 02A140 02B140

145° 06B145 05A145 05B145 04A145 04B145 12A145 12B145 02A145 02B145

148° 12A148

150° 06B150 05A150 05B150 12A150 12B150 02A150 02B150

152° 12A152

153° 12A153

154° 12A154

155° 12A155 12B155 02A155 02B155

156°158° 12A158

159° 12A159

160° 12A160 12B160 02A160

165° 12A165 12B165 02A165

for Wheel holder

432.6 432.6 432.3 414.000422.0

432.0/432.1434A000

432.3/414.000416.000419.000432.3

Axle 496.080 496.080 496.130 Steel axle BO414 riveted 496.422 Steel axle

(BO414;2025.09; 2025.09)

37

Silberschnitt Carbide Cutting WheelsIn order to help you make the right choice from the large number of possible combinations, we have summarised the glass cutting wheels for the mostfrequent applications in the table below and they are readily available from stock.

Customised solutions on the spot

In addition to standard solutions, Bohle willmanufacture all Silberschnitt wheels in increments

of 1° (from 75° to 165°) on request. The Bohleprofessionals will also be happy to assist you on

site to find solutions for your cutting requirements.Whether you need cutting wheels, wheel holders,complete solutions or other products for automaticglass cutting, by working closely with you we can

find optimum solutions.Call us. We will be glad to help you.

Please select the cutting wheel with the dimensions you require.Indicate required cutting angle or glass thickness to be cut.Recommendations for choosing the correct grind can be found on page 38.

Type 02...L 03 13 07 63 08 64D in mm 5 5,6 5,6 6 6 8 12,5

t in mm 1 1,08 1 1,14 3 2 4

d in mm 1,3 1,42 1,3 1,55 1,6 2,6 3

Packing unit Thickness tolerance +0.01mm10 / 100 pc. 10 / 100 pc. 10 / 100 pc. 10 / 100 pc. 10 pc. 10 pc. 10 pc.

Order Number /Cutting angle

02A000L 02B000L 02C000L 03A000 03B000 03C000 13A000 13B000 13C000 07A000 07B000 07C000 63A000 08A000 08B000 64A000

77° 08B077

90° 08B090

116°118° 02C118

120° 03B120 03C120 07B120

127° 02B127L 03B127 03C127 07B127

135° 02A135L 02B135L 03A135 03B135 13A135 13B135 07A135 07B135 08B135

140° 03A140 03B140 13A140 13B140 07A140 07B140

145° 02A145L 03A145 03B145 13A145 13B145 07A145 07B145 63A145

148°150° 02A150L 03A150 03B150 13A150 13B150 07A150 07B150 63A150 64A150

152° 03A152

153° 03A153

154° 03A154

155° 02A155L 03A155 03B155 13A155 13B155 07A155 07B155 63A155 64A155

156° 03A156

158° 03A158

159°160° 02A160L 03A160 64A160

165° 02A165L 03A165 64A165

for Wheel holder

439.1439.2

422.0432.0/ 432.1

414.000432.3

417.000418.000 422.1

Axle 496.439 496.422 496.160 496.300

38

Cutmaster Gold carbide cutting wheels with 10-fold service life

The innovative Cutmaster Gold carbide cutting wheels achieve what the glass processing industry has long been waiting for: the balance between cost reduction and quality improvement at the same time.

10-fold service lifeless frequent wheel changing results in additional cost savingconsistently high cutting quality over the entire operation time

Type 02 12 03D in mm 5,0 4,1 5,6

t in mm 1,0 1,08 1,08

d in mm 1,3 1,42 1,42

Packing unit 1/100 pc 1/100 pieces 1/100 pieces

110° 12C110G 03C110G

118° 12C118G

120° 12C120G

125° 12C125G 03C125G

130° 12A130G 03A130G 03C130G

135° 02A135GL 12A135G 03A135G 03B135G 03C135G

145° 02A145GL 12A145G 03A145G 03B145G 03C145G

148° 12A148G 03A148G 03C148G

150° 12A150G 03A150G 03C150G

152° 12A152G 03A152G

153° 12A153G 03A153G 03C153G

154° 12A154G 03A154G

155° 02A155GL 12A155G 03A155G 03C155G

158° 12A158G 03A158G 03C158G

Cutmaster Gold wheels are used onlyin metal pillar posts and standardglass cutting machines manufacturedby Bavelloni, Benteler, Bottero,Bystronic, Grenzebach, Hegla,Intermac, Lisec, Macotec und Rohmer+ Stimpfig can therefore easily beequipped with Cutmaster Gold.

For automatic cutting of shapes as well as laminated glassFor open cuts in glass thicknesses of 2 to 6 mm in the automotive field For standard cutting with an angle from 145° and upFor coated glass such as low-E

For automatic cutting of float glass 2 to 8 mm thick

For thin glass where high edge quality is requiredFor display glass as well as LCD, TFT and PDP

39

Silberschnitt Wheel HoldersExchanging cutting wheels in automatic cutting tables is made much easier when using wheel holders into which the cutting wheel is already integrated. Some models have the further advantage of being colour-coded to identify the respective cutting angle.

432. 432. 432. 432.10 432.20 432.30 432.60Material steel steel steel steel steel steel steelAxle incl. incl. for 496.138F incl. incl. incl. incl.Wheel type incl. 03 incl. 12 for 12/03 incl. 03A incl. 12A incl. 05A incl. 66AWheel ø 5,6mm 4,1mm for 4,1 / 5,6mm 5,6mm 4,1mm 3mm 3mm

with inscription

with inscription

with inscription

without inscription

without inscription

without inscription

without inscription

Suitable for automotive applications.When ordering, please indicate the wheel angle and grind.

For: 432.0 432.3 432.1 432.6Axle 496.138F 496.130 496.138F 496.080

Wheel type 12/03 05/02L 12/03 06/66

Wheel ø ø 4,1 / 5,6mm ø 3 / 5mm ø 4,1 / 5,6mm ø 2,5 / 3mmwithout angle inscription

without angle inscription

with hole for ballpressure piece

Suitable for the following glass processing machines:Armatec, Bando, Bavelloni, Benteler, Bystronic, Grenzebach, Hegla, Intermac, Laser,Lisec, MacoTec, Olbricht, Pannkoke, Pfister, Rohmer+Stimpfig

422.0 422.1 439.1 439.2 439.16 439.16VMaterial steel steel steel steel steel steelAxle 496.422 496.160 496.439 496.439 496.140F 496.140F Wheel type 12/03 63 02L 02L 12/03 12/03Wheel ø ø 4,1 / 5,6mm ø 6mm ø 5mm ø 5mm ø 4,1 / 5,6mm ø 4,1 / 5,6mm

L = 11,5 L = 16,5 tempered

Suitable for the following glass processing machines:Bottero Bottero Lisec Lisec Bottero Bottero

Bystronic Bystronic

Grenzebach Grenzebach

Benteler Benteler

40

432.7 432.8 432.71 432.81 416.1 416.2Material steel steel steel steel plastic plastic

Blade shape narrow wide narrow, 90° rotated wide, 90° rotated narrow wide

416 417 434Material plastic plastic bronze

Version coloured coloured natural

Wheel ø 5mm 6mm 4,1mm

wheel 02 wheel 07 wheel 12

10/100 10/100 10

Order numberSpecial angle

416A000 416B000 416C000 417A000 417B000 417C000 434A000

118° 416C118 light blue 417B118 light blue

120° 416B120 light blue 417B120 light blue

127° 416B127 yellow 417B127 yellow

135° 416A135 416B135 white 417A135 417B135 white 434A135

140° 416A140 416B140 blue 417B140 white 434A140

145° 416A145 416B145 black 417A145 417B145 black 434A145

150° 416A150 416B150 brown 417B150 red 434A150

155° 416A155 416B155 red 417A155 417B155 red

156° 434A156

160° 416A160 dark green

165° 416A165 light green

Mounting aid 440

The practical mounting aid forwheel holder 432.0 makes wheelchanging easy.

BT4320 Cap for 432

The cap is slipped onto the holder 432and ensures that the mounted axle aswell as the wheel don't fall out.

41

64A000

439.1015Grenzebach, ø 7mm, 14 x 18 x 40,5 mm

436.3015 Grenzebach, Bottero,limited rotation, ø 15,6 mm, H = 6 mm, L = 34,2 mm

436.200Grenzebach14 x 28,5 x 35 mm

436.220 limited rotation, Grenzebach,Bottero, ø 19 mm, L= 33,5 mm

436.3BYBystronicø 29 mm, H = 35 mm

436.BYBystronicø 29 mm, H = 35 mm

Complete SolutionsBohle has been developing and producing complete solutions for cutting machines for many years. By this we mean not only cutting wheels and axles,but also wheel holders and complete pillar posts. The range of pillar posts manufactured to customers' specific wishes is being continuously expanded.

Modern synthetic cutting fluids are definitely preferred over traditional cutting fluids like petroleum or kerosene. The greatestadvantages: good lubricating effect, an audibly softer break and andconsiderably improved edge quality. Furthermore, the modern cuttingfluids bind the glass dust and significantly reduce the amount ofglass splintering and dust.

Silberschnitt cutting fluids are watersoluble, environmentally safeand available for a wide range of applications.

42

Pressurized Spray Water Tank 12 lDrilling Aid - adjustable

Set of Diamond Drills for Ceramic

Drilling Aid for Pin Drill

Diamond Drills for Ceramic

Drilling Fixation Template with Suction Holders

Aquadrill Wet Drilling Machine

Aqua DrillThe universal wet drilling machine - the portable problem solver.

Art. No. BO 79.300

Art. No. BO 79.350 Art. No. BO 79.351

Art. No. BO 79.352

Art. No. BO 79.361

Art. No. BO 79.370

Art. No. Diameter

BO 79.3606 6 mm

BO 79.3608 8 mm

BO 79.3610 10 mm

BO 79.3612 12 mm

BO 79.3614 14 mm

BO 79.3626 26 mm

BO 79.3668 68 mm

When drilling is done in kitchens or bathrooms, it is not uncommon for tiles tocrack, resulting in the need for costly reworking. The new cordless wet drillingmachine, developed and manufactured by Bohle, reduces the risk of breakage considerably. It is driven by powerful 18 volt batteries and is equipped with a water chuck for diamond core drills. In combination with special positioningdevices, it allows safe and trouble-free drilling even of difficult materials likestoneware or granite.

Technical data: Drill diameter range: 5 - 70 mm · universal drill connection: ½” thread · 3 switchable gears: Speed of 1st gear 0-450 rpm, 2nd gear 0-1450 rpm, 3rd gear 0-2000 rpm · Quick coupling for water intake · 43 mm collar for use in the drill stand · high performance 18V/2.6Ah rechargeable battery + spare battery · tool case

Precise drilling without making a mess · the drilling dust is flushed with thecoolant · a special sealing lip on thesuction holder enables secure fixationeven on relatively rough surfaces · special exchangeable drill bushingsfor 6, 8, 10 and 12 mm diameters · incl. storage case

With vacuum suction holder andadjustable drill plate · for drill diameters of 6, 8, 10, 12 mm

With vacuum suction holders andadjustable universal drill guide · diameter range of 20 to 70 mm

One each of 6 mm, 8 mm, 10 mm and12 mm drill bits · incl. drill core ejectorand pin for releasing tight drills

Developed especially for the Bohlecordless wet drilling machine (BO 79.300) · manual drill bit changingwithout tools · for drilling hard ceramictiles, granite, marble and regular tiles· Drill connection: ½” thread · length 95mm

Water supply independent of waternetwork · integrated pressure gauge · plug-in coupling for direct connectionto the cordless wet drilling machine · length of connecting hose 3 m · safetyvalve 4 bar

43

Art. No. BO 50 004 99

Drills are also available with countersink or in heavy-duty industrialquality as well as special sizes.


BO 79.200

BO 79.200L With laser point positioning

Art. No. Diameter

BO 50 004 03 3 mm

BO 50 004 04 4 mm

BO 50 004 05 5 mm

BO 50 004 06 6 mm

BO 50 004 07 7 mm

BO 50 004 08 8 mm

BO 50 004 09 9 mm

BO 50 004 10 10 mm

BO 50 004 11 11 mm

BO 50 004 12 12 mm

BO 50 004 13 13 mm

BO 50 004 14 14 mm

BO 50 004 15 15 mm

BO 50 004 16 16 mm

BO 50 004 17 17 mm

BO 50 004 18 18 mm

BO 50 004 19 19 mm

BO 50 004 20 20 mm

BO 50 004 21 21 mm

BO 50 004 22 22 mm

BO 50 004 23 23 mm

BO 50 004 24 24 mm

BO 50 004 25 25 mm

BO 50 004 26 26 mm

BO 50 004 27 27 mm

BO 50 004 28 28 mm

BO 50 004 29 29 mm

BO 50 004 30 30 mm

BO 50 004 35 35 mm

BO 50 004 40 40 mm

BO 50 004 45 45 mm

BO 50 004 50 50 mm

BO 50 004 55 55 mm

BO 50 004 60 60 mm

BO 50 004 65 65 mm

BO 50 004 70 70 mm

Sharpening Stone for Diamond Drills

Diamond Core Drills, Standard QualityPico Drill 100 Drilling Machine

By drilling powerfully into the sharpen-ing stone a few times, new spaces arecreated between the diamond particles,leading to renewed cutting ability · ifsharpening does not lead to a positiveresult, first use the dressing stone BO 50 004 98

This portable precision drilling machine for diamond core drills was developed andproduced by Bohle. It is very well suited for use on-site as well as in the workshop.The machine is placed directly on top of the glass, a rubber ring prevents it fromslipping, integrated suction holders provide for even safer fixation on the glass.Coolant is supplied through the supply valve at the side. Lowering the drills is doneby a very precise and smooth mechanism. The machine comes with an integratedPRCD safety switch and can be plugged directly to an ordinary socket.

The model Pico Drill 100 L furthermore includes a point laser which facilitates thepositioning of the machine.

Technical Data: Electric motor 1.15 kW

For normal use · outer thread R 1/2 “(Continental) · length 75 mm · drill basemade of steel · covered with protectivelacquer · diamond coating from sinteredmaterial · drill has to be sharpenedbefore first use

Pico DrillPractical, high quality drilling machine for use on site or in the workshop.

44

Art. No. Product examples - Twin Belt for dry grinding

BO 80.12-T Twin Belt KSA 15T, for straight edges and shapes

BO 80.13-T Twin Belt Compact KSA-C 15T, for straight edges

Special models on request

Art. No. Product examples - Twin Belt for wet grinding

BO 80.12-P Twin Belt KSA 15/30, for straight edges and shapes

BO 80.13-P Twin Belt Compact KSA-C 15/30, for straight edges


Bohle twin belt grinding machines for dry grinding are ideally suited for theseapplications thanks to high-performance filtering systems. Scratches are avoidedbecause the glass surface stays clean when grinding.

Manual machine for dry grinding · high quality grinding for sensitive glass likelow-E · optimum cooling by special air guides · powerful filter technology ensuresthat workplace conforms to standards · especially high productivity when diamondbelts are used · optional air cushion table for easy handling and scratch prevention

Manual machine for wet grinding · high performance for perfect edge quality· adjustable glass thickness and depth of arris · especially high productivity whendiamond belts are used

Cross Belt Grinding MachinesBohle twin belt grinding machines are used for efficient arrissing of glass panes. These machines are available in diverse dry and wet grinding models and are especially suitable for multi-shift, high production use in industrial glass processing.

Twin Belt Grinding Machine - Twin BeltTwin Belt Grinding Machine - Twin Belt

45

Belt Grinding Machine - Profi BeltBelt Grinding Machine - Master Belt

Glass Belt Grinding MachinesFor every application the right solution: Bohle glass belt grinding machines are available in the series Master Belt, Profi and Basic. All models can be optionallyequipped with comprehensive accessories. At Bohle, top quality workmanship ensuring a longer service life is a matter of course: Screws, sheet matal and rolleraxles which are exposed to water are made of stainless steel; the machine housing is galvanized and lacquered. Smooth running is achieved by rubber-coated rolls.

Manual machine with two belt speeds or continuously adjustable control · including castor roller table for accurate guiding and support of all pane sizes · versatile and flexible for practically all grinding tasks · large contact roll (Ø 200 mm) for minimal hollow grinding · grinding and arrissing unit with easyhandwheel adjustment · additional sockets for coolant circulation system, additional tools and machine lamp · modular system: retrofitting and expansionpossible at any time · uses standard abrasive belts (100 x 1830 mm)

Art. No. Product examples - Master Belt

BO 80.5 Master Belt 11/22, 11 m/s and 22 m/s, 2-speed

BO 80.6 Master Belt 15/30, 15 m/s and 30 m/s, 2-speed

BO 80.6-S Master Belt 8/30-S, 8 m/s to 30 m/s, continuously adjustable

Manual machine with one belt speed · including castor roller table for accurateguiding and support of all pane sizes · for comprehensive grinding tasks · largecontact roll (Ø 200 mm) for minimal hollow grinding · additional sockets for coolant circulation system, additional tools and machine lamp · modular system:retrofitting and expansion possible at any time · uses standard abrasive belts (100 x 1830 mm)

BO 80.6-SE Master Belt 8/25-SE, 8 m/s to 25 m/s, continuously adjustable, 230 V single-phase


Art. No. Product examples - Profi Belt

BO 80.3-1 Profi Belt 11, 11 m/s standard model with castor roller table

BO 80.3-2 Profi Belt Eco 11, 11 m/s economic basic model

BO 80.3-K Profi Belt 11 K, with folding castor roller table


46

Manual Drilling Machine - Profi Drill VAutomatic Drilling Machine - Super Drill

Double-sided horizontal drilling machine with pneumo-hydraulic or electric feeddrive · contact-free digital measuring systems for drilling depth · easy digitaladjustment of the drilling depth at the meter · easy zero setting of the drill bypush-button · continuously adjustable feed of both spindles · drill diameters from 3 to 100 mm · long reach up to 1300 mm

Art. No. Product examples - Super Drill

BO 79.9-2D Super Drill Eco 2/1000-2ad with digital feed measuring system

BO 79.10-2 Super Drill Eco 2/1300 with electrical feed measuring system


Both spindles of the vertical, double-sided drilling machines of the series ProfiDrill are manually operated from the front. The machines are especially suitablefor quickly drilling precise holes in larger glass panes. A motor-driven lifting frameensures easy handling of the glass panes.

Double-sided vertical drilling machine · electronic speed control via frequency converter · digital adjustment and automatic positioning of vertical drilling values· space-saving vertical design · easy manual operation of the drill heads withouttedious setup · coolant control via solenoid valves · drill diameters from 3 to 80 mm (optionally up to 100 mm)

Art. No. Product examples - Profi Drill

BO 79.8-S Profi Drill V 2/900-S, 2000 x 1300 mm

BO 79.8-1S Profi Drill V 2/900-1S, 2500 x 1300 mm

BO 79.8-2S Profi Drill V 2/900-2S, 3000 x 1300 mm


Drilling MachinesGlass drilling machines are considered standard equipment for every glass processor. These machines prove themselves daily, particularly for universalprocessing of glass panes of diverse sizes. The Bohle glass drilling machines distinguish themselves by their easy adjustability, programmable settingparameters and spacious work area. A patented system for feed optimisation is the highlight of the top machines.

47

Sedimentors

Coolant Cleaning SystemsUsing machine coolant for a long time is not only better for the environment but also for your wallet. The new coolant cleaning systems from Bohle can help you do that. Thus the costly cleaning of the machine is greatly reduced. Further advantages of clean coolant: longer service life of tools andsignificantly improved processing quality of the glass.

Art. No. Product examples - Sedimentors

BO 85.10 Sedimentor 2.4P, fully automatic, powder flocculant, 2.4 m3

BO 85.20 Sedimentor 1.0P70, fully automatic, powder flocculant, 1.2 m3

BO 85.25 Sedimentor 1.0P300, fully automatic, powder flocculant, 1.2 m3

BO 85.30 Sedimentor 0.3 mini P - auto, automatic, powder flocculant, 0.3 m3

BO 85.35 Sedimentor 0.3 mini P, semi-automatic, powder flocculant, 0.3 m3


Bohle sedimentors work in two steps: Coarse glass dust is continuously separatedfrom the coolant during circulation as a result of an optimal tank design with special features (effective sedimentation). Fine particles are separated in batchprocesses. In an automated cycle aided by optimised flocculant, the system bindseven the finest glass particles, thus producing practically clear water for the system.

Practically clear water for the system using effective flocculant · much improvedprocessing quality, especially when polishing · time and effort to clean the glass processing machine is reduced significantly · compact, space-saving system · decentralised solution for use with one or more machines

48

Quick, Easy and Convenient: the Bohle Online-Shop

The brand new Bohle Online Shop offers you everything you expect from a modern internet shop: It is clear andunderstandable, up-to-date and easy to use.

Your online advantages at a glance:

Round-the-clock access to our current range of products 365 days a year

Daily updated information about new products

Immediate display of product availability

Display of customer-specific prices

Optimum summary of your purchase history

49

Export Sales Conditions

1. ApplicationThese conditions apply to sales, service as well as all statementsmade by Bohle in catalogues, brochures, price lists, quotations, onthe internet or verbally. Variations of these conditions are onlyvalid if confirmed by Bohle in writing. Any other terms or condi-tions are excluded. Placing an order means acceptance of theseconditions. Bohle may change their sales conditions at their dis-cretion.

2. Orders/Contract Orders are accepted by mail, internet, phone or fax but are onlybinding when accepted by Bohle in writing (order confirmation).

3.Price & Payment Terms Quotations are only valid in writing and for the stated period.Bohle reserves the right to change products at any time but gua-rantees at least equivalent functionality and performance.Prices are to be understood in €, net, ex-works, excluding tax,transport cost, insurance and installation. Bohle reserves the rightto adjust prices due to exchange rates, production cost, duties,insurance, freight and other purchase costs (incl. for components& services).Orders below € 300 are not accepted. For orders of up to € 600 aprocessing charge of € 80 will be added. Excluded are deliveriesof spare parts. Payment is to be made either in advance (wire transfer) or by irre-vocable, confirmed letter of credit issued to our indicated bank.Other payment conditions have to be agreed upon prior to accep-ting the order. All bank charges outside Germany are for theaccount of the purchaser. Bohle covers all bank charges insideGermany.Bohle may suspend deliveries or service until having received fullpayment. Late payment entitles Bohle to charge interest of 6%above the minimum bank rate of the European Central Bank on theamount due. Any cost involved with receiving a late payment arefor the account of the purchaser. Cheques may only be acceptedconditionally.

4. Delivery/Title/Risk Deliveries take place from our warehouses in Haan or Torgau(Germany). The delivery period stated in the order confirmation isapproximate. Delays in delivery do not justify any kind of compen-sation.We reserve the right to supply similar articles in case the productsordered are not available or have been modified. Partial deliveriesmay be made. Title to product passes on full payment only. Untilthen the purchaser has to insure and store the goods separatelyand may not modify, pledge or sell them. On request the productshave to be made available to Bohle for re-collection.

Should the purchaser sell the goods before the title has passed,the proceeds of that sale shall be held on Bohle's behalf, separa-tely from the purchaser's general funds. If the purchaser refusesto accept a delivery without Bohle's agreement, he must payBohle's expenses or loss resulting from that refusal, including sto-rage costs, until he accepts delivery.

5. Acceptance Delivered products have to be inspected by the purchaser prompt-ly after receipt of the delivery. If the purchaser does not claim anydiscrepancies in the delivery within 1 week after receipt of theshipment in his warehouse, the goods are considered as accepted.Should Bohle agree to returning products, they must be in theiroriginal condition (unused, undamaged, in original packaging) andaccompanied by a return note as well as proof of purchase. Anyreturn charges are for the purchaser's account.

6. WarrantyBohle guarantees that their products will be free from defects for6 months after date of invoice. Should a product be defective wit-hin this period, Bohle will repair or replace it within a reasonabletime. Bohle is allowed to examine the product at the purchaser'sor Bohle's premises (at Bohle´s choice). Any return of goods has tobe approved by Bohle in writing before being effected. Any ship-ments sent collect will not be accepted. Bohle will not acceptwarranty protection claims for damage caused by incorrect instal-lation, use, modifications or repair by the purchaser or any unau-thorised 3rd party.

7. Liability Any liability exceeding the replacement of faulty material is gene-rally excluded. This refers especially to any indirect or consequen-tial loss, damages or expenses.

8. Force Majeure Bohle is not liable for delays in delivery or service caused by cir-cumstances beyond their reasonable control and will be entitledto a delivery time extension for the fulfilment of the order.

9. Jurisdiction Only German law applies and the exclusive place of jurisdictionfor all legal disputes is Haan, Germany.

50

Refuse the package altogetheror, when accepting the package,make a note on the delivery slipof the parcel service and informthe corresponding depot immediately.

Transport by:

Parcel Service

Packaging damaged: Packaging fine but contents damaged:

What we need from you:

Inform the corresponding parcelservice immediately after having received the goods as otherwisethere is no insurance coverage.

The package number and numberof delivery note. Without these,an acknowledgement of thedamage is not possible.

Request a written confirmationfrom the post man or refuse thepackage.

A damage confirmation from thepost office. Without it, a regulation of thedamage is not possible.

Refuse the delivery or unpack inpresence of a member of thecarrier´s business and request aconfirmation of the facts fromthe goods department.

An official confirmation of factsand the original consignmentnote with endorsement on theback. Without these, an acknowledgement of the damage is not possible.

Refuse delivery or, when accepting, make a corresponding comment on thedelivery note of the forwarderand inform the forwarder immediately.

Copy of the receipt slip with indication of damage.

Postal Service

Train

Forwarder

Inform the corresponding postoffice and request their visitand confirmation of the facts.Present original package within24 hours.

Inform the corresponding goodsdepartment and request theirvisit and confirmation of thefacts. Damages must be claimedwithin one week.

Inform the forwarder immediately after receipt of thedelivery as otherwise there isno insurance coverage.

Important procedures in case oftransport damage:

Do not change packing or contents. Do not use the products.Inform the forwarder of the damage. The table below explains the important steps.Inform Bohle directly of the damage.Before accepting the delivery, make sure the number of cartons/packages is correct. Later claims regarding missing products can only be accepted in exceptional cases.

Bohle AG

Bohle Online Shop www.bohle.de

If you don't have a contact person yet, dial

Phone +49 2129 5568-0 for our receptionFax +49 2129 5568-201E-Mail [email protected] goods up D - 42781 Haan · Siemensstraße 1Postal address D - 42755 Haan · Postfach 101163

Opening hoursMonday to Thursday 8.00 am - 4.30 pmFriday 8.00 am - 2.00 pm

Picking goods upMonday to Thursday 8.00 am - 3.00 pmFriday 8.00 am - 12.00 am

How to contact Bohle

8-19

54 ·

04_0

8 · G

B · 2

,0

Germany

Bohle AG · Head OfficeDieselstraße 10D - 42781 Haan

T +49 2129 5568-0F +49 2129 5568-201

[email protected]

South Africa

Bohle Glass Equipment (Pty) Ltd.Unit 3, Graphite Industrial ParkFabriek Street,Strijdom Park 2125, Gauteng

T +27 11 792-6430F +27 11 793-5634

[email protected]

tools for glass professionals - veribor||fipa|orobica ...today the brand names silberschnitt,...

Documents