Tool-TracTool Carrier and Mini Loader in one Machine…

Easy and

quick!

Great capacity and flexibility

• Reduces unwanted waiting time.

• Enables all of your staff to work independently.

• Stops the need to have additional machines for each task.

• Improves the safe working environment by removing the need for manual heavy lifting.

Tool-Trac solves the tasks

- As small building machine or as the professional lawn mower for large areas...

Tool-Trac is equipped “walk-in cab”

- With low entrance height only 40 cm. Easy and comfortable for the driver. Furthermore, the Tool-Trac is extremely flexible with an innerturning radius only 650 mm.

Very flexible...

Tool-Trac - from tool carrier to mini loader in only 3 minutes...

2.5 m Lift

Floating A-frames for non-stationary tools

The tools can move free and independent from the machine.

With its many tools Tool-Trac is ready for most tasks.

Quickly changeable frames for fixed tools

- 4-point-locking.

Quick change is operated from the cab with a Joystick..

Hydraulic coupling:Readily accessible on the front arm for easy attachment.

• A double-acting cylinder for hydraulic operation• Two double-acting cylinder functions.• Oil drain for excess oil.

Tool-Trac,can easily pull a trailer up to

2000 Kg.

Tool-Trac is a good choice:

- for snow clearance on streets, footways etc. ...

- or if you want to disperse sand and salt.

...in all weathers!

Easy snowclearance in the parking

area...

Many Different ‘Rapid Change’ Tools

- offer great flexibility of machine use

- improved efficiency through better utilisation

Snow Brush and Snow Plough

Hydraulic Snow Brush S1300/S1500 with heavy Ø 600 mm brushes

Hydraulically swinging + - 21 degree right and left. When the Snow Brush is operated in reverse, a rubber splash guard prevents water spray and debris reaching the windscreen.

Snow Plough attachment D1316/D1318 to Snow Brush

When clearing snow, it can save a great deal of time by having both a Snow Brush and a Snow Plough fitted at the same time. The Snow Plough can be lowered hydraulically in front of the Snow Brush when the snow is too thick to be removed by the Snow Brush. The hydraulic Snow Plough can be attached to both the Timan S1300 and S1500 Snow Brush. The attachment is connected hydraulically and can be angled +/- 21 degree to both the left and the right side of the machine. The Snow Plough is fitted with a high-performance 50 mm rubber wear strip to avoid unne-cessary damage to floor surfaces.

Technical data:

Timan Snow Brush S1300 S1500 Driving engine Sauer Danfoss Sauer DanfossAngle of swing +/- 21˚ +/- 21˚Sweeping width 1300 mm 1500 mmSweeping width inclined 21̊ 1200 mm 1400 mmMaximum oil flow 60 litres 60 litresMaximum power 14 kW 14 kWDimensions and weight :Length 1100 mm 1100 mmWidth 1500 mm 1700 mmHeight 950 mm 950 mmWeight net 220 kg 240 kg

Timan Snow Plough D1316 D1518 Angle of swing +/- 21˚ +/- 21˚Wing width 1600 mm 1800 mmShield width inclined 21̊ 1480 1580Rubber filling 50 mm 50 mmRotating rubber fillings Yes YesMax. tractor size 35 kW 35 kWTravelling speed max. 15 km/h 15 km/hProtection function Yes YesFitted on the sweeper S1300 S1500Dimensions and weight (snow plough fitted on the sweeper)Length 1200 mm 1200 mmWidth 1600 mm 1800 mmHeight 950 mm 950 mmWeight 340 kg 350 kg

Snow Plough attachment is fixed with over-load protection with automatic spring.

Tornado 400The Best multilateral Solution in its Class...By using a Tool-Trac in combination with a Tornado 400, you can convert from a suction sweeper, to a large-area mower to a mini loader with ladle - in less than 3 minutes - RAPID CHANGE

Snow Brush and Snow Plough

Timan Snow Plough D1316 D1518 Angle of swing +/- 21˚ +/- 21˚Wing width 1600 mm 1800 mmShield width inclined 21̊ 1480 1580Rubber filling 50 mm 50 mmRotating rubber fillings Yes YesMax. tractor size 35 kW 35 kWTravelling speed max. 15 km/h 15 km/hProtection function Yes YesFitted on the sweeper S1300 S1500Dimensions and weight (snow plough fitted on the sweeper)Length 1200 mm 1200 mmWidth 1600 mm 1800 mmHeight 950 mm 950 mmWeight 340 kg 350 kg

Tornado 400:Tank width 1250 mmLength 2000 mmSuction nozzle width 500 mmSweeping speed 2-6 km/hMax. sweeping width 1800 mmMin. sweeping width 1360 mmCapacity 350 litreAirflow 3200 m3/hWater tank 50 literMax. water consumption 1,2 l/min Water pressure 1,7 bar

Length of the external suction hose : 8 m

Good, all round Visibility

Even with many of the attachments fitted, the Tool-Trac offers excellent visibility, improving safety and making taskseasier.

Technical Data:

Great Suction Power with High Efficiency

The Tornado 400 is equipped with a single reinforced suction hose Ø 650 mm, between the tank and the suction nozzle, providing a very strong suction vacuum.

Manufacturer:Timan A/SFabriksvej 13 . DK-6980 Tim Telefon: +45 97 33 03 60 Fax: +45 97 33 03 50 www.timan.dk

Model

Engine Type

Antal cylindre

Engine power (PS/cc)

Gear unit

4WD

Difference

Working hydraulics

Manoeuvre hydraulics

Transport speed

A-frame in front and in rear

Total width with standard preparation

Total width with small tyres (optional)

Total length without tools

Total height

Air-conditioning

Tool-Trac 237

Kubota water-cooled Diesel engine

4

37,0 / 1.498

hydro static driving gear with 2 areas

Standard

mechanical starter 100 %

48 l/min – 250 bar

33 l/min – 210 bar

till 35 km/h

Cat. 1

1.250 mm

1.070 mm

2.860 mm

1.920 mm

optional

Tool-Trac 245

Kubota water-cooled Diesel engine

4

45,0 / 1.498

hydro static driving gear with 2 areas

Standard

mechanical starter 100 %

58 l/min – 250 bar

33 l/min – 210 bar

till 35 km/h

Cat. 1

1.250 mm

1.070 mm

2.860 mm

1.920 mm

optional

Dealer:

Technical Data

35-1

4 . w

ww.

vide

baek

-bog

trykk

eri.d

k