tomelleriengineering spaceplus 6-7axes 1 · 2016-10-25 · into another language without the prior...
TRANSCRIPT
TOMELLERI ENGINEERING HI-END MEASURING ARMS
_______________________________________________________________________________________________________
Viale del Lavoro 12/a - I-37069 VILLAFRANCA (VR) - Tel +39.045.630.47.44 - Fax +39.045.630.36.57 www.tomelleri-spacearms.com
TOMELLERI ENGINEERING S.r.l. Legal Office:
Viale del Lavoro 12/A 37069 VILLAFRANCA (VR) ITALY Via Orione 6 37066 SOMMACAMPAGNA (VR) ITALY
Phone +39.045.6304744 Fax. +39.045.6303657 Phone +39.045.8961420 Fax. +39.045.8979782
E-mail: [email protected] P.IVA: 01664120233
Page 1 di 2
PORTABLE MEASURING MACHINE SPACE Plus
Datasheet
Rev.: 1
MACHINE DATA
Machine Portable measuring
machine
Model SPACE Plus 6-7 axes
Power supply 100 - 240V / 50 Hz - 60 Hz
Protection IP 54
Operating conditions
+5° to +40°C Humidity 85% without
condensing
Each measuring machine is certified following the ISO 10360-2 procedure.
SPACE serie PLUS (6 and 7 axes arms) *=2 sigma error (mm)
SPACE Plus Measuring
range
Volumetric
accuracy*
Point
Repeatability* Weight (Kg)
SPACE PLUS 1.8
6 Axes
1800mm 0,020 0,012 8,4
SPACE PLUS 2.5 2500mm 0,026 0,016 8,9
SPACE PLUS 3.2 3200mm 0,036 0,020 9,3
SPACE PLUS 4.0 4000mm 0,046 0,024 10,0
SPACE PLUS 1.8
7 Axes
1800mm 0,027 0,017 8,9
SPACE PLUS 2.5 2500mm 0,034 0,021 9,4
SPACE PLUS 3.2 3200mm 0,045 0,026 9,8
SPACE PLUS 4.0 4000mm 0,056 0,030 10,5
TOMELLERI ENGINEERING
Page 2 di 2
Copyright Tomelleri Engineering S.r.l. 2016 Aknowledgements:.. .........This documentation may refer to some trademarks, Microsoft® and
Windows® are registered trademarks of Microsoft Corporation in the United States and other countries. Renishaw® is a registered trademark of Renishaw plc.
All right reserved:...............No part of this document may be photocopied, reproduced, or translated
into another language without the prior written consent to Tomelleri Engineering S.r.l.
Warning:............................ The informations contained in this document are subject to change without
notice, Tomelleri Engineering S.r.l. reserves this right to improve over time the specifics of the technical documentation provided to the user.
Note:..................................The technical characteristics of the machine should not be considered
binding, we reserve the right to make changes to improve product quality and technical performance.
Attention:......................... Before you move, install, start, operate and dismantle the machine, you must have understood and have followed the conditions specified in the various chapters of this documentation. Any indication that was not followed or understood, in case of malfunction or damage to persons or property not involves the direct responsibility of the manufacturer.