to make it right - control global

Cashco, Inc.P.O. Box 6 • Ellsworth, KS 67439-0006

Ph. (785) 472-4461 • Fax: (785) 472-3539

Cashco Canada, Inc.Units 30 & 31 • 212 Wyecroft Road • Oakville, Ontario L6K 3T9 • Canada

Ph. (905) 842-4720 • Fax (905) 842-2436

BAC25988/12/02

www.cashco comInnovative Solutions

Innovative SolutionsInnovative SolutionsTo make it right

Control Valves

ControlValveCatalog.qxd 4/21/04 9:05 AM

The Model 764P is a highly reliable versatile,inexpensive pneumatic proportional pressurecontroller. It's available with cast iron or 316 SSTsensing heads and can be set for direct or reverseaction.

1111

CashcoModel 764P

Controllers

The Model 764T is a pneumatic temperaturecontroller. Ideal for bleachers, cookers, heatexchangers and other applications that requiredurable and accurate temperature control.

CashcoModel 764T

Signal Output:3-15 psig6-30 psig

Control Range:30" Vac through 2500 psig

Options:Diaphragm SealsTri-clamp Connection

Signal Output:3-15 psig

Control Range:-70°F to +580°F

Options:Thermal Bulb

Get Consistent Quality

By involving every employee in our ISO 9001/2000 Quality Assurance

Program, we provide quality you can count on. We have coordinated

our business systems, invested in state-of-the-art machine tools, and

built an extensive component inventory so we can consistently provide

cost-effective solutions and on-time delivery to meet your replacement

or project requirements — regardless of size or complexity.

Make the Right Choice

“We simply make it right” by putting your needs first. The next time you

specify control valves, regulators or you need a replacement fast, call

the supplier that makes it right. Rely on Cashco for your single-source

convenience. Great service, field-proven quality, and timely delivery

makes Cashco the right choice.

Select Control Valves & Regulators FOR SPECIALIZED OR UTILITY SERVICE

We manufacture a broad line of throttling rotary and linear control

valves, pressure reducing regulators, and back pressure regulators in

line sizes from 1⁄4 inch to 12 inches and Cv ranges from .002 to 8,455.

Models are available to handle slurries, cryogenic service, and corrosive

fluids; to withstand high temperatures and pressures; and to maximize

the reduction of fugitive emissions. Contact Cashco for complete

product information.

Introduction

22

ControlValveCatalog.qxd 4/21/04 9:06 AM Page 3

Control ValvesLight Industrial • Utility

Model 2296 5

Model 964 5

Model 2266 6

Model 685 6

Process Control Valves

Model Ranger QCT 7

Models 520/521 8

Model The Premier 8

Model 988, 988-MB & 989 9

Model 987 10

Controllers

Model 764P & 764T 11

Table of Contents

33

The Model 987 precision globe-style “chemicalvalve” is the valve of choice to handle hostilefluids and environments – as well as steam andwater. Its corrosion-resistant, ductile iron, field-reversible actuator, alloy body and trim materials,high pressure-drop capability, and exceptionallylow Cv rangeability make the Model 987 one ofthe most reliable and versatile valves in thechemical process industry. This valve is forexceptional low Cv rangeability plus high pressurecapability.

Body sizes:1/2", 3/4", 1"

Maximum Cv:Six sizes for metal seat 0.276 to 6.95Three sizes for TFE seat 2.60 to 6.70

Materials:Body and trim — 316L SST

Alloy 20, Monel, Hastelloy C-22, and similar alloysEnd connections:

NPT, SW, and flangelessTemperature range:

-20°F to +450°FPressure drop:

Metal seat – up to 1500 psidTFE seat – up to 400 psid

Seat leakage:Class IV or Class VI

Options:Stellite seating and guide bushingTop-mounted handwheel, P/P and I/P positioners, position switches

1010

CashcoModel 987


99

Models 988 and 989 are globe-style controlvalves with pneumatic spring-return actuator.Originally designed for chemical plants andcorrosive service, they have large diameterstems, special finishes on the stem and packingboxes, close-coupled guiding, and live-loadedpacking systems. Rugged construction, longevity,and low maintenance make these valves apopular choice in industrial process applications.The main difference between the 988 and 989 arein the face-to-face dimensions.

The Models 988 and 989 are versatile, heavy-duty throttling valves for general or corrosivechemical service.

Body sizes:3/4" (988 only), 1", 1-1/2", 2"

Maximum Cv:From 0.25 to 50

Materials:Body – CS, 316L SST, Ni-Mo-Cr, CW-12MW (988 only)Trim – 316L SST, HC-22

End connections:988 – NPT, SW, separable flanges for Classes 150#, 300#, and PN40989 – separable flanges for Classes 150# and 300#

Face-to-face:988 – ISA - 75.03 1984 (long)989 – ISA - 75.20 1992 (short)

Temperature range:-20°F to +750°F

Pressure drop:TFE seat – up to 400 psid Metal seat – up to 740 psid

Seat leakage:Class IV and Class VI

Options:High temperature service, NACE service, multiple packing variations, stellited seat surfaces

CashcoModels 988/989

FUGITIVEEMISSIONS

Model 988-MB is a modified version of our Model988 designed to handle hazardous fluids. Tominimize fugitive emissions, it is fitted with ametallic bellows stem seal subassembly and live-loaded secondary stem packing seal. Inletpressure is from full vacuum to 200 psig. Thismodel protects against fugitive emissions.

Body sizes:1", 1-1/2", 2"



End connections:NPT, SW, separable flanges for Classes 150#, 300#, and PN40Face-to-face:ISA - 75.03 1984 (long)





CashcoModels 988-MB

44

At Cashco we have been creating innovative pressure controlsolutions to meet the needs of American industry since 1920. Todayyou’ll find the Cashco name on an extensive line of control valves, self-contained regulators, and related components.

Cashco control valves and regulators are in use worldwide, covering awide range of applications. We believe our quality is surpassed only bythe service we provide to ensure you get the product you need —when you need it. When you contact Cashco or our representatives,you will discover the care we take to help you specify the best valvefor your application and in the speed with which we handle your order— large or small.

If you don’t find what you’re looking for in the following pages, we willbe glad to provide you with personal assistance and technicalliterature. Just call (785) 472-4461 or fax (785) 472-3539 your request.You can also email us at: [email protected].

Light Industrial • Utility


Body sizes:1/2", 3/4", 1", 1-1/2", 2"

Maximum Cv: 41

Materials:Body — 316 L SSTTrim — SSTSeat — SST, TFE

End connections:NPT female pipe thread, Flanged, and Extended Nipples

Temperature range:-20°F to +400°F; -325°F to +100°F cryogenic

Pressure drop:Up to 275

Seat leakage:Metal - II & IVSoft - VI

Options:Cryogenic Construction, Reduced Orifice, and Extension Columns

55

The Model 2296 is a stainless steel bodied controlvalve is like the 2266 with its features. The Model2296 offers Quick - Change Trim, equal or lineartrim characteristic, and all wetted 316 or 316LSST. With cryogenic capabilities the 2296 is one ofthe most versatile SST control valves on themarket. This is an economical stainless steelcontrol valve with cryogenic capability.

CashcoModel 2296

Body sizes:3/4", 1", 1-1/2", 2", 3"

Maximum Cv: From 4 to 100

Materials:Body — CI, CSTrim — SSTSeat — Metal, TFE

End connections:3/4", 1", 1-1/2", 2" — NPT1-1/2", 2", 3" — 125#, 250# integral flanges or 150#, 300# separable steel flanges


Pressure drop:Soft seat — up to 400 psidMetal seat — up to 740 psid


Options:Stellited metal seat, P/P and I/P smart positioners

The Model 964 is a globe-style pneumatic controlvalve available in iron and carbon steel for generalplant utility services. It is field-reversible withoutremoval from the line. This “workhorse” valveoffers equal-percentage quick-change cage-typetrim and can handle steam, industrial gases, air,water, and oil applications. This is a versatile, low-cost valve available in iron and steel.

CashcoModel 964

Body sizes:3", 4", 6", 8", 10", 12"

Maximum Cv:EZO – from 179 to 7810 Unlined – from 243 to 8455

Materials:Body – DI, CS, SSTStem – 17-4PH, 316Disc – SST

End connections:EZO – flangeless, mates with ANSI 150# and 300#Unlined – flangeless wafer, mates with ANSI 125#, 150#, and 300#


Pressure drop:EZO – to 150 psid Unlined – to 300 psid

Seat leakage:EZO – Class VIUnlined – 1% of maximum Cv

Options:P/P or I/P positioners, handwheel, position switches or solenoid

Body sizes:1/2", 1", 1-1/2" (521 only), 2"


Materials:Isostatically compacted TFE in SST body shell

End connections:150# and 300# flanged

Temperature range:0°F to +310°F

Pressure drop:From 10 to 275 psid

Seat leakage:Class VI

The Model 520 Angle-Style and Model 521 Globe-Style Control Valves are sliding stem, bellowssealed, pneumatically actuated valves designedto achieve the ultimate in long-term corrosivechemical service.

Our exclusive unibody forged-TFE construction isunique in the industry and can handle evenabsolute vacuum applications. The one-piecebody is machined from a solid block ofisostatically compacted virgin TFE and encased ina cast 304 SST body shell to prevent distortion.

Construction includes a 100,000-cycle TFEbellows, quick change trim, replaceable plug, anddual stem seal design to minimize emissions.These valves can handle strong acids and bases,most organics and industrial reagents.

The Models 520/521 are total TFE design forunequalled corrosive chemical service.


This valve was born to throttle. The Premier EZO(short for easy opening) has superb throttlingcharacteristics and is designed to eliminate "pop-off" flow surges. It is available in a lined version orunlined in three body materials and six sizes from3" to 12". The Premier uses the same multi-springreturn actuator as the Ranger QCT and has asquare-shaft stem coupling that’s easy to adapt toyour favorite actuator. This valve has a butterflydesign for demanding throttling service.

CashcoThe Premier

88

MODEL 520(Angle-Sty le)

MODEL 521(Globe-Sty le)

FUGITIVEEMISSIONS


77

Body sizes:1/2", 3/4", 1", 1-1/2", 2"


Materials:Body – BRZTrim – SSTSeats – Metal, TFE

End connections:NPT female pipe thread

Temperature range:-20°F to +400°F-325°F to +150°F cryogenic


Seat leakage:Class II and Class VI

Options:Extension columns to protect packing and actuator in cryogenic service

Body sizes:1/2", 3/4", 1", 1-1/2", 2"

Maximum Cv:2.5 to 34

Wetted Materials:316 SST

End connections:NPT

Temperature range:Up to +175°F

Pressure Inlet:Inlet: up to 1000 psig

Pressure drop:Up to 600 psid

66

The Model 2266 is a brass-bodied low-costcontrol valve well-suited for utility and processapplications. With optional extension columns itbecomes an excellent cryogenic valve. The Model2266 offers a linear trim characteristic. It can beused without a positioner, has quick-change trim,and is field-reversible with fail-safe action. This isan economical utility control valve with standardlive loaded packing.

CashcoModel 2266

The Model 685 is a sliding stem pneumatic 3-wayvalve. This valve is designed for either mixing oftwo separate flow streams into a common outletor for diverting a common flow stream into twoseparate outlet flow streams. Commonly used forinline chemical mixing or bypass temperaturecontrol loops.

CashcoModel 685

Body sizes:1", 1-1/2", 2", 3", 4", 6", 8"


Materials:Body – DI, CS, SSTTrim – Inconel X-750/625 metal seals TFE or Kel-F soft seals SST or Stellite #6 plugRemaining parts – SST20 trim combinations to select from

End connections:Flanged in CS and SST and available in flangeless



Seat leakage:ANSI/FCI 70-2, Class VI with TFE Class IV above 500°F or without TFE

Options:Multiple low noise reduction trim and seal retainers0.2, 0.4, 0.6 reduced trimsAnti-cavitation trim, abrasion sleeve, P/P or I/P smart positioners, position switch, line bolting, special packing designsNACE serviceCryogenic servicePneumatic, electric, or manual actuators

Face to face:ISA-S75.04

The Ranger QCT is the only truly universal controlvalve you can buy. It is the most versatile,adaptable, and easily maintainable valve everproduced. No other valve is more user friendly.

The Ranger offers over 20 different trimcombinations. Trim can easily be changed in lessthan 5 minutes without disturbing the packing,actuator, or positioner calibration. The servicearea is a threadless design, which resistscorrosion or collection of chemical deposits. Noother valve on the market can handle cavitation ornoise reduction as easily or as economically!

A selection of 3 body materials with a broadtemperature range from -325°F to +750°F makesthe Ranger adaptable for use in steam, heattransfer fluids, slurries, gases, liquids, andcryogenic applications. Ranger’s unique dualseating design provides both Class VI and back-up Class IV seat leakage. And the standardpatented live-loaded packing system lets youcheck and adjust packing without the need forspecialized tools or complicated procedures.

A multiple-spring-return actuator that offers fail-safe capability and runs on a minimal air supply(35 psig max) is standard. The Ranger has asquare shaft stem connection instead of a splineshaft so that it can be quickly and economicallyadapted to other types of actuators. In everyrespect, the Ranger QCT exemplifies the Cashcomotto –

“We Simply Make It Right!”

CashcoRanger QCT

Process Valves

offers exceptional erosion resistance

Also availableCORROSION TRIM

replaces standard stem andplug with highly

corrosion-resistant components

ABRASION SLEEVE

provides 7-12dBAnoise attenuation

LOW-NOISE TRIM

replaces the standard seal retainer

ANTI-CAVITATION TRIM

installs in minutes withoutplug or seat-ring changes

REDUCING TRIM

Also availableINTEGRAL

FLANGED BODY

FUGITIVEEMISSIONS


Body sizes:1/2", 3/4", 1", 1-1/2", 2"

Maximum Cv: 41

Materials:Body — 316 L SSTTrim — SSTSeat — SST, TFE

End connections:NPT female pipe thread, Flanged, and Extended Nipples

Temperature range:-20°F to +400°F; -325°F to +100°F cryogenic

Pressure drop:Up to 275

Seat leakage:Metal - II & IVSoft - VI

Options:Cryogenic Construction, Reduced Orifice, and Extension Columns

55

The Model 2296 is a stainless steel bodied controlvalve is like the 2266 with its features. The Model2296 offers Quick - Change Trim, equal or lineartrim characteristic, and all wetted 316 or 316LSST. With cryogenic capabilities the 2296 is one ofthe most versatile SST control valves on themarket. This is an economical stainless steelcontrol valve with cryogenic capability.

CashcoModel 2296

Body sizes:3/4", 1", 1-1/2", 2", 3"

Maximum Cv: From 4 to 100

Materials:Body — CI, CSTrim — SSTSeat — Metal, TFE

End connections:3/4", 1", 1-1/2", 2" — NPT1-1/2", 2", 3" — 125#, 250# integral flanges or 150#, 300# separable steel flanges


Pressure drop:Soft seat — up to 400 psidMetal seat — up to 740 psid


Options:Stellited metal seat, P/P and I/P smart positioners

The Model 964 is a globe-style pneumatic controlvalve available in iron and carbon steel for generalplant utility services. It is field-reversible withoutremoval from the line. This “workhorse” valveoffers equal-percentage quick-change cage-typetrim and can handle steam, industrial gases, air,water, and oil applications. This is a versatile, low-cost valve available in iron and steel.

CashcoModel 964

Body sizes:3", 4", 6", 8", 10", 12"

Maximum Cv:EZO – from 179 to 7810 Unlined – from 243 to 8455

Materials:Body – DI, CS, SSTStem – 17-4PH, 316Disc – SST

End connections:EZO – flangeless, mates with ANSI 150# and 300#Unlined – flangeless wafer, mates with ANSI 125#, 150#, and 300#


Pressure drop:EZO – to 150 psid Unlined – to 300 psid

Seat leakage:EZO – Class VIUnlined – 1% of maximum Cv

Options:P/P or I/P positioners, handwheel, position switches or solenoid

Body sizes:1/2", 1", 1-1/2" (521 only), 2"


Materials:Isostatically compacted TFE in SST body shell

End connections:150# and 300# flanged

Temperature range:0°F to +310°F


Seat leakage:Class VI

The Model 520 Angle-Style and Model 521 Globe-Style Control Valves are sliding stem, bellowssealed, pneumatically actuated valves designedto achieve the ultimate in long-term corrosivechemical service.

Our exclusive unibody forged-TFE construction isunique in the industry and can handle evenabsolute vacuum applications. The one-piecebody is machined from a solid block ofisostatically compacted virgin TFE and encased ina cast 304 SST body shell to prevent distortion.

Construction includes a 100,000-cycle TFEbellows, quick change trim, replaceable plug, anddual stem seal design to minimize emissions.These valves can handle strong acids and bases,most organics and industrial reagents.

The Models 520/521 are total TFE design forunequalled corrosive chemical service.


This valve was born to throttle. The Premier EZO(short for easy opening) has superb throttlingcharacteristics and is designed to eliminate "pop-off" flow surges. It is available in a lined version orunlined in three body materials and six sizes from3" to 12". The Premier uses the same multi-springreturn actuator as the Ranger QCT and has asquare-shaft stem coupling that’s easy to adapt toyour favorite actuator. This valve has a butterflydesign for demanding throttling service.

CashcoThe Premier

88

MODEL 520(Angle-Sty le)

MODEL 521(Globe-Sty le)

FUGITIVEEMISSIONS


99

Models 988 and 989 are globe-style controlvalves with pneumatic spring-return actuator.Originally designed for chemical plants andcorrosive service, they have large diameterstems, special finishes on the stem and packingboxes, close-coupled guiding, and live-loadedpacking systems. Rugged construction, longevity,and low maintenance make these valves apopular choice in industrial process applications.The main difference between the 988 and 989 arein the face-to-face dimensions.

The Models 988 and 989 are versatile, heavy-duty throttling valves for general or corrosivechemical service.

Body sizes:3/4" (988 only), 1", 1-1/2", 2"



End connections:988 – NPT, SW, separable flanges for Classes 150#, 300#, and PN40989 – separable flanges for Classes 150# and 300#

Face-to-face:988 – ISA - 75.03 1984 (long)989 – ISA - 75.20 1992 (short)






FUGITIVEEMISSIONS

Model 988-MB is a modified version of our Model988 designed to handle hazardous fluids. Tominimize fugitive emissions, it is fitted with ametallic bellows stem seal subassembly and live-loaded secondary stem packing seal. Inletpressure is from full vacuum to 200 psig. Thismodel protects against fugitive emissions.

Body sizes:1", 1-1/2", 2"



End connections:NPT, SW, separable flanges for Classes 150#, 300#, and PN40Face-to-face:ISA - 75.03 1984 (long)





CashcoModels 988-MB

44

At Cashco we have been creating innovative pressure controlsolutions to meet the needs of American industry since 1920. Todayyou’ll find the Cashco name on an extensive line of control valves, self-contained regulators, and related components.

Cashco control valves and regulators are in use worldwide, covering awide range of applications. We believe our quality is surpassed only bythe service we provide to ensure you get the product you need —when you need it. When you contact Cashco or our representatives,you will discover the care we take to help you specify the best valvefor your application and in the speed with which we handle your order— large or small.

If you don’t find what you’re looking for in the following pages, we willbe glad to provide you with personal assistance and technicalliterature. Just call (785) 472-4461 or fax (785) 472-3539 your request.You can also email us at: [email protected].

Light Industrial • Utility


Control ValvesLight Industrial • Utility

Model 2296 5

Model 964 5

Model 2266 6

Model 685 6

Process Control Valves

Model Ranger QCT 7

Models 520/521 8

Model The Premier 8

Model 988, 988-MB & 989 9

Model 987 10

Controllers

Model 764P & 764T 11

Table of Contents

33

The Model 987 precision globe-style “chemicalvalve” is the valve of choice to handle hostilefluids and environments – as well as steam andwater. Its corrosion-resistant, ductile iron, field-reversible actuator, alloy body and trim materials,high pressure-drop capability, and exceptionallylow Cv rangeability make the Model 987 one ofthe most reliable and versatile valves in thechemical process industry. This valve is forexceptional low Cv rangeability plus high pressurecapability.

Body sizes:1/2", 3/4", 1"

Maximum Cv:Six sizes for metal seat 0.276 to 6.95Three sizes for TFE seat 2.60 to 6.70

Materials:Body and trim — 316L SST

Alloy 20, Monel, Hastelloy C-22, and similar alloysEnd connections:

NPT, SW, and flangelessTemperature range:

-20°F to +450°FPressure drop:

Metal seat – up to 1500 psidTFE seat – up to 400 psid

Seat leakage:Class IV or Class VI

Options:Stellite seating and guide bushingTop-mounted handwheel, P/P and I/P positioners, position switches

1010

CashcoModel 987


The Model 764P is a highly reliable versatile,inexpensive pneumatic proportional pressurecontroller. It's available with cast iron or 316 SSTsensing heads and can be set for direct or reverseaction.

1111

CashcoModel 764P

Controllers

The Model 764T is a pneumatic temperaturecontroller. Ideal for bleachers, cookers, heatexchangers and other applications that requiredurable and accurate temperature control.

CashcoModel 764T

Signal Output:3-15 psig6-30 psig

Control Range:30" Vac through 2500 psig

Options:Diaphragm SealsTri-clamp Connection

Signal Output:3-15 psig

Control Range:-70°F to +580°F

Options:Thermal Bulb

Get Consistent Quality

By involving every employee in our ISO 9001/2000 Quality Assurance

Program, we provide quality you can count on. We have coordinated

our business systems, invested in state-of-the-art machine tools, and

built an extensive component inventory so we can consistently provide

cost-effective solutions and on-time delivery to meet your replacement

or project requirements — regardless of size or complexity.

Make the Right Choice

“We simply make it right” by putting your needs first. The next time you

specify control valves, regulators or you need a replacement fast, call

the supplier that makes it right. Rely on Cashco for your single-source

convenience. Great service, field-proven quality, and timely delivery

makes Cashco the right choice.

Select Control Valves & Regulators FOR SPECIALIZED OR UTILITY SERVICE

We manufacture a broad line of throttling rotary and linear control

valves, pressure reducing regulators, and back pressure regulators in

line sizes from 1⁄4 inch to 12 inches and Cv ranges from .002 to 8,455.

Models are available to handle slurries, cryogenic service, and corrosive

fluids; to withstand high temperatures and pressures; and to maximize

the reduction of fugitive emissions. Contact Cashco for complete

product information.

Introduction

22


Cashco, Inc.P.O. Box 6 • Ellsworth, KS 67439-0006

Ph. (785) 472-4461 • Fax: (785) 472-3539

Cashco Canada, Inc.Units 30 & 31 • 212 Wyecroft Road • Oakville, Ontario L6K 3T9 • Canada

Ph. (905) 842-4720 • Fax (905) 842-2436

BAC25988/12/02

www.cashco comInnovative Solutions

Innovative SolutionsInnovative SolutionsTo make it right

Control Valves


to make it right - control global

Documents