___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

1

To All Lamborghini Dealers and Licensed Service Point From Customer Service Department Subject Door Module ECU software update Group 10.42.00 Date 12/10/2011 Pages 28 Subject Door module software update Models/VINs involved: Aventador LP-700 MY12 from VIN 00091 to VIN 00227 Attention: please carefully check on the Lamborghini Web-portal to verify the VIN-Information and if the vehicle is affected by this Service Campaign before the start of any updating.

Information to the field

As a result of a continuous product monitoring, Automobili Lamborghini S.p.A. found that, in some cases, rear mirrors folding functionality could be improved per-forming a software update. Field solution Follow the herein reported instruction to update the door module control units.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

2

Warranty Claim data

The warranty reimbursement request for this rework action will be managed by the following standard Warranty Claim procedures.

Campaign Code: L834-A.02.11 Campaign Description: Door Module software update Cost Code: 50 Component Code: CCA0211 Trouble Code: 220 Labour Code: CCA0211100 Labour Time: 1 hr

Remember to fill all data in the section “Service and Recall Campaign” in the War-ranty booklet of the vehicle as shown below.

Workshop instructions

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

3

Preliminary operations: Lamborghini Flash Container version1.01 download and installation procedure

NOTE: the installation of the flash container is necessary to perform the doors ECUs software update.

This software only extracts the flash files in the right folder (C:\SIDIS\home\datflash)

1 Connect your Lamborghini Diagnosis Tester to internet and log on the Lamborghini web portal.

2 Open the section Customer Service/Downloads/Diagnosis SW 2011

3 Download the file “Lamborghini_flash_container_v1_01.zip”

4

Double click on the just down-loaded zip file and then open the file Lambor-ghini_Flash_Container_v1_01.exe, as shown in the picture beside.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

4

5 Click on “Install” and wait that the installation is completed.

6 Click on “Finish” to exit.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

5

Update procedure:

1

Please connect a battery charger to the recharge points in the en-gine bonnet, as shown in the pic-ture beside.

2

Please connect the VAS5054 in-terface to the vehicle’s OBD plug and to the diagnostic laptop. Turn the ignition ON

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

6

3 Start the VAS-PC double click-ing on the related icon on the desktop

4 Ignore the message about the base-CD update. Click on “OK”.

5 Click on “OK” to hide the gen-eral information window

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

7

6 Select “Guided Functions”.

7 Click on “OK”.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

8

8 Click on “Lamborghini”.

9 Confirm the vehicle identifica-tion data shown on the upper

right clicking on .

10 Scroll down the ECU list and se-lect “Software Version Man-agement”.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

9

11

Select “SVM – Direct input: SVM code for problem related

update” and click on to add the program into the test plan.

12 Run the program clicking on

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

10

13 Click on the grey bar to enter the SVM code

14 Enter the code LB834A0211

then click on to confirm

15 Confirm that the inserted code is correct clicking on “Yes”

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

11

16 Click on “Done” to start the data acquisition from all the vehicle’s ECUs.

17 Wait until the data acquisition from all control modules is com-pleted.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

12

18

For the online authentication a valid GeKo account is necessary. Be sure that your internet con-nection is working properly. Click on “Done” to access the Login window.

19

Insert your GeKo user name in the field “Login” and the pin 1324 + the current 6 digit code displayed on your GeKo token in the field Password. Then confirm clicking on OK.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

13

20

A message as shown beside in-forms you that a software to be updated has been detected”. Click on “Done”.

21

The flash data containers are al-ready saved on the diagnostic laptop. Press “Done”.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

14

22 Press “Done” to start the data acquisition to flash the ECU.

23 Click on “Done”.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

15

24

The new driver door ECU soft-ware part number and version will be 470959793A; 0702 Click on “Done” to continue.

25

The new passenger door ECU software part number and ver-sion will be 470959792A; 0702 Click on “Done” to continue.

26

Select the option no.2 “Perform update programming on all con-trol modules without interrup-tion”.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

16

27 Click on “Done” to start the flash update for both ECUs.

28 Wait until the update program-ming of the driver door ECU is completed.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

17

29

A message on the screen informs you of the successful update programming as shown in the picture. Press “Done” to start the update programming of the passenger door ECU. If the update programming has been incomplete or unsuccessful:

- turn the ignition OFF - wait 1 minute before

turning the ignition ON again

- if offered by the pro-gram: select “Repeat” to retry the update pro-gramming, otherwise re-peat the procedure from step 12

30 Wait until the update program-ming of the passenger door ECU is completed.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

18

31

A message on the screen informs you of the successful update programming as shown in the picture. Press “Done” to continue. If the update programming has been incomplete or unsuccessful:

- turn the ignition OFF - wait 1 minute before

turning the ignition ON again

- if offered by the pro-gram: select “Repeat” to retry the update pro-gramming, otherwise re-peat the procedure from step 12

32

In the following an ignition OFF – ON cycle is necessary to re-start both the ECUs. Press “Done” to continue.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

19

33 Switch the ignition OFF.

34

Wait 1 minute before switching the ignition ON again.

Then press on .

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

20

35

For some vehicles the passenger door control unit is automatically recoded. (see picture) Otherwise, please skip at step 41.

36 Click on “Yes” to write the new ECU coding.

37

When the coding has been suc-cessful the message is displayed as shown beside. Press “Done” to continue. If the coding fails:

- turn the ignition OFF - wait 1 minute before

turning the ignition ON again

- if offered by the pro-gram: select “Repeat” to retry the coding, other-wise repeat the proce-

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

21

dure from step 12

38

In the following an ignition OFF – ON cycle is necessary to re-start both the ECUs. Press “Done” to continue.

39 Switch the ignition OFF

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

22

40

Wait 1 minute before switching the ignition ON again.

Then press on .

41 Press “Done”.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

23

42 Press “Done” to start the data re-port

43 Wait until the data acquisition from all the control modules is completed.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

24

44

The message shown beside in the picture, informs you that the up-date has been successful. Press on “Done”.

45 Press on “Done” to exit the pro-gram

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

25

46 Go back to the Software Version Management menu clicking on

47

Select and run the program “Erase fault memory – overall systems” to clear all the faults stored because of the software update.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

26

ECU adaptations after software programming Please perform the following procedure to execute the correct adaptations for both ECUs

1

Execute the window lifter position adaptation for both ECUs See the repair manual at chapter 10.42.00 for the related procedure regarding the driver door ECU See the repair manual at chapter 10.52.00 for the related procedure regarding the passen-ger door ECU

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

27

Troubleshooting

A.

If the error message regarding the VAS5054 interface is shown as in the pic-ture beside:

- close the VAS-PC and repeat the VAS5054 installation as described in the chapter 10.92.00

B.

If the connection error screen is shown as in the picture beside:

- it is not possible to establish a con-nection with the central server. Please check carefully that the di-agnosis laptop is properly con-nected to the internet network

C.

If the incorrect identification message is shown as in the picture beside

- be sure that your Geko account is valid;

- be sure that the label “Geko” is written on the token that you are us-ing for the authentication;

- click on Cancel and perform the ap-plication test as described in the chapter 10.92.00.

___________________________________________________________________The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire translation thereof are prohibited without written authorization from Automobili Lambor-ghini S.p.A.

28

Your Area Manager is at full disposal for further information. Best regards

Customer Service