túnel de secado uv gelificación (de baja presión) uv ... · good quality in high pressure uv...

2
UV Drying Tunnel Gelation (low pressure) Túnel de Secado UV Gelificación (de baja presión) - En su interior se encuentran las lámparas UV de Baja Presión y Baja Potencia. - Su misión es imprimirle a la pieza un primer tratamiento fotoquímico, la insolación del polímero, que consiste en emitir radiación en una longitud de onda que comience a excitar las moléculas del polímero. - Esto es esencial para conseguir un buen secado en el horno UV de Alta Presión. - Su función pues, es de vital importancia, ya que el secado que se puede conseguir ofrece una mejor calidad y acabado supercial. - Estos túneles se fabrican según las necesidades del cliente, aunque normalmente se realizan entre 600 y 2000 milímetros de ancho, en módulos de 2 metros de longitud. - Low pressure and low power lamps are installed inside the tunnel. - The purpose is to apply the first photochemical treatment to the pieces: polymer radiation. The process consists in starting the stimulation of polymer molecules by radiating in a proper wavelength. - This is absolutely necessary in order to get good quality in high pressure UV drying tunnel. - Therefore, the first treatment is crucial to get a good quality and surface finishing. Túnel de secado UV Gelificación (de baja presión) UV Drying tunnel Gelation (low pressure) Low pressure UV drying tunnel consists of two units of 700mm wide and 2 meters long each (4 meters total length) - Tunnels are built according to our clients request. However, sizes are usually from 600 to 2000 mm wide and 2 meters long. Nuevas Técnicas de Dispersión, S.L. NTD Pol. Ind. La Esperanza, C/Comunidad de Murcia, 152 12400 Segorbe (Castellón) España Tel. +34 964714032 - [email protected] www.ntdmaquinaria.com Túnel UV de baja presión compuesto por dos módulos de 700 mm de ancho y 2 metros de longitud cada uno (4 metros en total)

Upload: others

Post on 01-Apr-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Túnel de Secado UV Gelificación (de baja presión) UV ... · good quality in high pressure UV drying tunnel. - Therefore, the first treatment is crucial to get a good quality and

UV Drying Tunnel Gelation (low pressure)Túnel de Secado UV Gelificación (de baja presión)

- En su interior se encuentran las lámparasUV de Baja Presión y Baja Potencia.

- Su misión es imprimirle a la pieza un primertratamiento fotoquímico, la insolación delpolímero, que consiste en emitir radiaciónen una longitud de onda que comience aexcitar las moléculas del polímero.

- Esto es esencial para conseguir un buensecado en el horno UV de Alta Presión.

- Su función pues, es de vital importancia,ya que el secado que se puede conseguirofrece una mejor calidad y acabado supercial.

- Estos túneles se fabrican según lasnecesidades del cliente, aunque normalmentese realizan entre 600 y 2000 milímetrosde ancho, en módulos de 2 metros de longitud.

- Low pressure and low power lamps areinstalled inside the tunnel.

- The pu rpose i s t o app ly t he f i r s tphotochemical treatment to the pieces: polymerradiation. The process consists in starting thestimulation of polymer molecules by radiatingin a proper wavelength.

- This is absolutely necessary in order to getgood quality in high pressure UV drying tunnel.

- Therefore, the first treatment is crucial to geta good qual i ty and surface f in ish ing.

Túnel de secado UV Gelificación(de baja presión)

UV Drying tunnel Gelation(low pressure)

Low pressure UV drying tunnel consists oftwo units of 700mm wide and 2 meters longeach (4 meters total length)

- Tunnels are built according to our clients request.However, sizes are usually from 600 to 2000 mmwide and 2 meters long.

Nuevas Técnicas de Dispersión, S.L.

NTDPol. Ind. La Esperanza, C/Comunidad de Murcia, 15212400 Segorbe (Castellón) EspañaTel. +34 964714032 - [email protected]

Túnel UV de baja presión compuesto pordos módulos de 700 mm de ancho y 2 metrosde longitud cada uno (4 metros en total)

Page 2: Túnel de Secado UV Gelificación (de baja presión) UV ... · good quality in high pressure UV drying tunnel. - Therefore, the first treatment is crucial to get a good quality and

CARACTERÍSTICAS TÉCNICAS

(1 módulo de 700 mm de ancho y2000 mm de largo)

- Ancho útil de radiación 700 mm- Ancho paso del túnel 680 mm- Longitud de los tubos 1.500 mm- Longitud total del túnel 2.000 mm- Altura máxima de paso 110 mm- Nº de Lámparas 14 ud- Potencia de las Lámparas 14x140 W- Lámparas TL03 7 ud- Lámparas TL05 7 ud- Potencia del ventilador 33 W- Caudal del ventilador 500 m3/h

T E C H N I C A L F E A T U R E S

(1 unit 700 mm wide and 2000 mm long)

- Working radiation width 700 mm- Tunnel passage width 680mm- Tubes length 1.500 mm- Tunnel total length 2.000 mm- Maximum passage height 110 mm- Number of lamps 14 units- Power of Lamps 14x140 W- TL03 Lamps 7 units- TL05 Lamps 7 units- Power of ventilator 33 W- Ventilator flow 500 m3/h

UV Drying tunnel Gelation (low pressure)Túnel de secado UV Gelificación (de baja presión)

UV Drying tunnel Gelation (low pressure)

Túnel de secado UV gelificación (de baja presión)

Detalle vista inferior

Detail of bottom view

Low pressure UV drying tunnel (gelation).2000mm wide and 2000 long.

Túnel UV de baja (gelificación) de 2000 mmde ancho y 2000 mm de largo.