tna specifications · 2019. 4. 23. · tested as per ansi z359.1-2007 anchorage connector locking...

1

6000 Jefferson Highway | Harahan, LA 70123 | PalmerSafetyUS.com Phone: (504) 733-1808 Fax: (504) 733-2996 PalmerSafetyUS.com TECHNICAL SPECIFICATIONS Tested as per ANSI Z359.1-2007 Anchorage Connector Locking Pin Griping disk. 10.43” Rubber Grips Tightening Handles 9.02” Direction of use. 22.74” 13.98” PN: A00002 Parapet Anchor Parapet Anchor. Galvanized Steel. 2.36′′ – 14.17′′ parapet range. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007. DESIGN: • Anchor suitable to be installed on the parapet of a building such that the anchor point lies at the top on the outside facade of the building. • Suitable to be installed on varying thicknesses of a parapet. Width adjustment feature provided. • Tightening on to the parapet by use of rubber disks. MIN. WIDTH OF THE PARAPET ON WHICH INSTALLATION IS POSSIBLE: 2.36 in. MIN. WIDTH OF THE PARAPET ON WHICH INSTALLATION IS POSSIBLE: 14.17 in. MATERIAL: High strength alloy steel FINISH: Silver/yellow galvanized SYSTEM STRENGTH: Greater than 25 kN CONFORM TO NORM: Meets or exeeds ANSI Z359.1-2007 WEIGHT: 19.84 lbs. ± 0.22 lbs.

Upload: others

Post on 02-Mar-2021

3 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: TNA SPECIFICATIONS · 2019. 4. 23. · Tested as per ANSI Z359.1-2007 Anchorage Connector Locking Pin Griping disk. 10.43” Rubber Grips Tightening Handles 9.02” Direction of use

6000 Jefferson Highway | Harahan, LA 70123 | PalmerSafetyUS.com

Phone: (504) 733-1808Fax: (504) 733-2996

PalmerSafetyUS.com

TECHNICALSPECIFICATIONS

Tested as per ANSI Z359.1-2007

Anc

hora

ge C

onne

ctor

Locking Pin

Grip

ing

disk

.10.4

3”

Rub

ber G

rips

Tigh

teni

ng H

andl

es9.02

”

Direction ofuse.

22.74”

13.98”

PN: A00002

Parapet AnchorParapet Anchor. Galvanized Steel. 2.36′′ – 14.17′′ parapet range. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007.

DESIGN:

• Anchor suitable to be installed on the parapet of a building such that the anchor point lies at the top on the outside facade of the building.

• Suitable to be installed on varying thicknesses of a parapet. Width adjustment feature provided.

• Tightening on to the parapet by use of rubber disks.

MIN. WIDTH OF THE PARAPET ON WHICH INSTALLATION IS POSSIBLE: 2.36 in.

MIN. WIDTH OF THE PARAPET ON WHICH INSTALLATION IS POSSIBLE: 14.17 in.

MATERIAL: High strength alloy steel

FINISH: Silver/yellow galvanized

SYSTEM STRENGTH: Greater than 25 kN

CONFORM TO NORM: Meets or exeeds ANSI Z359.1-2007

WEIGHT: 19.84 lbs. ± 0.22 lbs.

INSTRUCTION MANUAL · 2016. 10. 26. · CORE MOUNT SLEEVES Model Numbers: 8510109, 8510110 Figure 1 - 8510109, 8510110 8510109, 8510110 A 8510109 8510110 INSTRUCTION MANUAL ANSI Z359.1

Denesųłiné Honié · 2016. 3. 21. · exposed to the griping hand of famine, so frequently felt by those who are called the annual traders." Apparently, Hearne lost his way in

User Instruction Manual Tripod Anchorage Connectors · carabiners are required by ANSI Z359.1 and OSHA. ... OSHA 1926.500 and 1910.66; “Anchorages ... C. SECONDARY OR BACK-UP FALL

INSTRUCTION MANUAL - 3M ANSI A10.32 Personal Fall Protection use in Construction and Demolition ANSI Z359.1 Safety Requirements for Personal Fall Arrest Systems, Subsystems, and Components

WAGE SURVEY 2014 - NMIDAnmida.com/wp-content/uploads/2015/09/NMIDA_Wage-Survey...Packers 766 1.1% $10.43 $8.10 $13.60 1 Bookkeeping, Accounting, and Auditing Clerks 738 1.1% $14.97

Whining, Griping, and Complaining: Positivity in the ...people.uncw.edu/hakanr/documents/whining.pdf · Recent years have seen a surge of interest in the positive psychology movement

antennaproducts.comantennaproducts.com/wp-content/uploads/2015/01/SafetyClimb-APC-… · OSHA CFR 1926.1053 and ANSI A14.3 requirements. The carabiner is compliant with ANSI Z359.1-07

Reusable Anchor - Gemtor CHA-34_Concrete Anchor.pdf · Meets OSHA and ANSI including Z359.1. Concrete Hole Anchor Gemtor’s Model #CHA-34 Concrete Hole Anchor is constructed of

User Instruction Manual Rigid Lifelines® Defy™ Self-Retracting …integritycrane.com/wp-content/uploads/2016/02/Defy-Self... · 2016. 3. 22. · ANSI Z359.1-2007 states that anchorages

CAMP Safety 5099900 ゴブリン /5099909 ゴブリンブラック...Z359.1 - .12 OVAL STEEL CONNECTOR Compatibility カンプセーフティハーネス取扱い説明書一般

Fall Protection - MSAnet.commedia.msanet.com/NA/USA/CatalogSections/FallProtection.pdfANSI Z 359 family of standards MSA will have a new line of lanyards compliant to ANSI Z359.1-2007

A New Era for an Old Standard A Review of Changes to ANSI Z359.1

SUSPENDED SCAFFOLDING & RIGGING SOLUTIONS …suspendedscaffolding.spiderstaging.com/s/Catalog/Fall... · Certification: Fully complies with ANSI A10.32, 2004 and ANSI Z359.1,

© 2007 Capital Safety A New Era for an Old Standard A Review of Changes to ANSI Z359.1

COMMUNITIES THAT THRIVE...2021/03/04 · IPO –3Q10 4Q20 IPO –3Q10 4Q20 80.3% $10.43 88.2% $19.43 OCCUPANCY ABR PER SQ.FT. INCREASING OCCUPANCY GROWING RENT LEVELS 20 WHITESTONE

TECHNICAL SPECIFICATIONS - palmersafetyus.com · Tested as per ANSI Z359.1-1992 Stitching Pattern Energy absorber (PN 500) 0.98”Polyester webbing Steel Snap Hook (PN -124) Length

Table of ContentsSales Associate #2: 8“My shift was just beginning when the thief stole the dress. 9I overheard my peeved cohorts griping about Ann Peterson and Petra Cummins—the

Outpaitent Hospital fee schedule · 80051 electrolyte panel $6.92 $6.23 $5.60 80053 comprehen metabolic panel $10.43 $9.39 $8.44 80055 obstetric panel $47.21 $42.49 $38.24 80061 lipid

Catálogo Miller Musitani - d26lpennugtm8s.cloudfront.netd26lpennugtm8s.cloudfront.net/stores/084/189/rte/Catalogo-Miller... · ansi z359.1 (2007), ansi z359.3 (2007), ansi a10.32,

Management Directive 10.43, 'Time and Labor Reporting.' · implementation of the PeopleSoft Human Resources Management System (HRMS) time and labor system. The MD includes the roles

afet Prodcts:pringmmer Promotion - industry.airliquide.ca · • ANSI Z359.1-2007 and A10.32-2004 • Constructed of high density polyethylene (HDPE) • Excellent traction in all

CamScanner 08-19-2020 10.43...ROBERT G WATKINS is hereby authorized to instruct and supervise operators, train instructors, inspect, calibrate, perform field service and repairs, and

European Athletics Championships History IRELAND · Irish European Championship History - 1946-2016 3 Men 100m 1986 Philip Snoddy 7h4 10.88 2010 Jason Smyth 4h5 10.43 4 SF 10.46

FINANCIAL SERVICES - IBEF · Plan (SIP) route reached Rs 67,190 crore (US$ 10.43 billion) during FY18 from Rs 43,921 crore (US$ 6.55 billion) during FY17. During April - August 2018,

self-retracting lanyards harnesses fall protection kits shock ...media.msanet.com/NA/USA/FallProtection/FullBodyHarnesses/...ANSI Z359.1-2007 and is certified to CSA Z259.11-05 E4

Safety Standards for Fall Protection - lni.wa.gov · Z359.1, that may be adjustable to distribute a fall arresting force over at least the thighs, shoulders and pelvis, with provisions

ROPE VERTICAL LIFELINE - Global Industrial€¦ · ROPE VERTICAL LIFELINE Complies with ANSI Z359.1-2007, OSHA 1910 and 1926 requirements. CUERDA SALVAVIDAS VERTICAL DE FIBRAS TRENZADAS

The Pulse 10.43 » October 24, 2013

Workman Fall Protection Products - Construction Equipment · of fall protection is a leading factor in ... ANSI A10.32 & ANSI Z359.1, and is ... • Meets ANSI Z359.1-2007, ANSI A10.32-2004

Cableless Measurement of Hand Griping Patterns and Heart

Workman Fall Protection Products - Aréo-Feu · of fall protection is a leading factor in ... ANSI A10.32 & ANSI Z359.1, and is ... • Meets ANSI Z359.1-2007, ANSI A10.32-2004 and

Transcrestal Sinus Floor Elevation:A Retrospective Study ...€¦ · mesial and distal surfaces of each dental implant surface. Results: After a mean follow-up period of 10.43 1 5.01

DRAFT FALL PROTECTION REQUIREMENTS FOR CONSTRUCTION - WAC ... · the requirements specified in ANSI Z359.1-2007, that may be adjustable to distribute a fall arresting force over at

Sellstrom 2704 Series Retractalok SRL’s Specification ...€¦ · Specification & Data Sheet SELLSTROM MANUFACTURING COMPANY ... ANSI A10.14, Z359.1, OSHA 1920.66, 1926.500 Height:

IVC - bie.telangana.gov.inbie.telangana.gov.in/files/CommunicationEnggLab.pdf · Pliers : These are used for holding or griping small screws or bolts in position, cutting, twisting