title: dimensional drawing, 4201l

400[15.748]

400[15.748]

32.4[1.27]

930.2 (ACTIVE AREA)[36.62]

523.3 (ACTIVE AREA)[20.60]

995[39.17]

588[23.15]

37.9[1.492]

OPTICAL = 42.8 [1.69 ]IT = 39.8 [1.57 ]

125.5[4.94]

TITLE: DIMENSIONAL DRAWING, 4201L

REV: BDATE: 05/10/13

MS601421DIMENSIONS ARE IN MILLIMETERS [INCHES]

REMOTE OSD E483757INCLUDED WITH MONITOR

AC POWER IN

REMOTE OSDDISPLAY PORT IN

HDMI IN

VGA INPUT

TOUCH USB

HEADPHONE OUTPUT

AUDIO LINE IN

COMPUTER MODULE(OPTIONAL KIT)

SECURITY COVER(INCLUED WITH OPTIONAL COMPUTER MODULE)

AMBIENT LIGHT SENSOR

M6 THREADS PER VESA MIS-F 400X400MAX THREAD DEPTH = 10MM

RFID READER BAY(OPTIONAL KIT)

COMPUTER MODULE BAYI/O CABLESECURITY COVER

I/O CONNECTIONS(UNDER SECURITY COVER)

52[2.05], X2

36[1.42], X2

639[25.16]

208[8.189]

63.8[2.512]

452[17.795]

33.8[1.331]




OPTIONAL STAND KIT P/N:E455084

138.4[5.45]

50[1.97]




OPTIONAL RFID KIT P/N:E603158

SEE DETAIL B

RFID READER MODULE

DETAIL BSCALE 1:1

RFID ANTENNA LOCATION(BEHIND BEZEL)

129[5.08]

19.5[.77]




MOUNTING INTERFACE FOR PERIPHERALS(ONE PER SIDE, FOUR TOTAL)

SEE DETAIL C

DETAIL CSCALE 1:2

M3 THREADS, X2



MS601421DIMENSIONS ARE IN MILLIMETERS

PRODUCT VENTING LOCATIONSDO NOT BLOCK DURING OPERATION

THERMAL RECOMMENDATIONS(PORTRAIT AND LANDSCAPE ORIENTATION)

WALL-MOUNTING FLUSH-MOUNTING

WALLSTRUCTURE

AIRSPACE BEHIND MONITOR MUST NEVER EXCEED 40° C DURING OPERATION. INSTALL VENTING AND/OR FANS IN WALL STRUCTURETO CIRCULATE AIR AND MAINTAIN SAFE OPERATING TEMPERATURE.

AIRFLOW DIRECTION

AIRFLOW DIRECTION

MAINTAIN AMBIENT ROOM TEMPERATUREBELOW 40° C.

MONITOR

AIRFLOW DIRECTION

WALL STRUCTURE

AIRFLOW DIRECTION



MS601421DIMENSIONS ARE IN MILLIMETERS

THERMAL RECOMMENDATIONS(TABLE-TOP ORIENTATION)

PRODUCT VENTING ALL AROUND MONITORMUST BE KEPT OPEN TO MAINTAIN

SAFE OPERATING TEMPERATURE.WHEN MOUNTED IN TABLE-TOP ORIENTATION, DO NOT ALLOW AIR TEMPERATURE UNDERNEATH TOUCH MONITOR TO EXCEED OPERATING TEMPERATURE SPECIFICATIONS. RECOMMENDATION:INSTALL AIR CIRCULATION DEVICES ABLE TO MONITOR AND CONTROL AIRSPACE TEMPERATURE UNDER THE TOUCHMONITOR SO IT WILL COMPLY WITH OPERATING TEMPERATURE SPECIFICATIONS .

406.4[16.0]

48[1.890]

38[1.496]

330.9[13.03]

25.7[1.01], X4




A 1/4" SCREW LOCATIONS FOR USE WITH FLAT-HEAD SCREWS

B 1/4" SCREW LOCATIONS FOR USE WITHSTANDARD HEX BOLTS

INSTALLATION INSTRUCTIONS

OPTIONAL WALL MOUNT KITP/N E750497

MOUNTING BRACKET HOLE SPACINGFOR WOOD OR STEEL STUDDED WALLSSTUD SPACING = 16"

SAFETY WARNING:1. FOLLOW ALL APPLICABLE BUILDING CODE GUIDELINES.2. INSTALLER MUST SELECT APPROPRIATE SCREW TYPE BASED ON WALL CONSTUCTION AND BUILDING CODE GUIDELINES.3. DO NOT USE FEWER THAN 4 SCREWS PER BRACKET AND DO NOT USE SCREWS LESS THAN 1/4" NOMINAL DIAMETER.3. ALL SCREWS MUST BE SECURED TO WALL STUDS OR OTHER STRUCTURAL COMPONENTS CAPABLE OF SAFELY SUPPORTING THE FULL WEIGHT OF THE TOUCHMONITOR AND ANY ADDITIONAL ITEMS ATTACHED TO IT. DO NOT FASTEN DIRECTLY TO GYPSUM WALLBOARD.

SCALE 1:2

A

A

A

A

A

A

A

A

B

B B

B

B

BB

BSCALE 3:20

TIGHTEN THUMBSCREW TO ENSURE MONITOR IS SECURELYATTACHED TO WALL.

SEE DETAIL E

SCALE 3:20

TILT MONITOR BACK ~15 DEGREESAND ALIGN MONITOR PINS WITH WALLMOUNTBRACKET HOOKS. ROTATE MONITOR DOWNWARDSLOWLY TO MAKE SURE PINS ARE SAFELY ENGAGED WITH WALLMOUNT HOOKS.

SEE DETAIL D

UPPER BRACKET

LOWER BRACKET

WALL STUDS

WALLBOARD

DETAIL DSCALE 2:5

PIN

DETAIL ESCALE 2:5

THUMBSCREW

279.5[11.00]

279.5[11.00]

74.1[2.92]

76[2.99]

995[39.17]

588[23.15]

277.6[10.93]

277.5[10.92]

76[2.99]

76[2.99]

995[39.17]

588[23.15]

IT = 85.7 [3.37 ]OPTICAL = 88.7 [3.5]

313.9[12.36]

313.9[12.36]




LANDSCAPE ORIENTATION

PORTRAIT ORIENTATION

OPTIONAL WALL MOUNT KITP/N E750497

MONITOR OUTLINE

WALL BOARD

WALL STUDS

MONITOR OUTLINE

title: dimensional drawing, 4201l

Documents