time and frequency activities at cenamep panama, 2015
TRANSCRIPT
Time and Frequency activities at Time and Frequency activities at CENAMEPCENAMEP
Panama, 2015.
History of the Laboratory (I)History of the Laboratory (I)
• October 31, 2002: CENAMEP was officially inaugurated as part of the SENACYT.
• October 2003: with the TTS-2 receiver we started to report to the UTC and developed new calibration services
• 2007: the government recognized CENAMEP as the National Metrology Laboratory of Panama.
• 2008: CENAMEP started as an independent metrology institute named CENAMEP AIP (Centro Nacional de Metrología de Panamá, Asociación de Interés Público).
2015-01-29 2
History of the Laboratory (I)History of the Laboratory (I)
• 2009: the government recognized CENAMEP AIP standards as the National Standards of Panama.
• 2010: UTC(CNMP) is declared the official time of the Panamanian government.
• October 2011: CENAMEP AIP started to build its new laboratories.
• The original date to move to the new laboratories was in the second trimester of 2014. But due to some situations, the move was delayed and we don’t have official dates to start the move.
2015-01-29 3
• International comparisons:– October 2003: Joined the UTC Key comparison.– December 2005: Joined the SIM T&F Network.– January 2012: Joined the UTCr pilot project.
• Local comparison:– March 2013: Start the comparison of the 3 cesium
beam clocks.
History of the Laboratory (II)History of the Laboratory (II)
2015-01-29 4
History of the Laboratory (III)History of the Laboratory (III)
• 2006: First calibrations and measurement capabilities included in the BIPM database.
• 2007: Beginning of the dissemination of the time using a Web Clock.
• 2008: Start to disseminate the time using the NTP servers (restricted only for government)
• 2009: Start to disseminate the time using the telephone line (project developed by CENAM)
• 2011: Last calibrations and measurement capabilities include in the BIPM database.
2015-01-29 5
Laboratory StaffLaboratory Staff
• Three metrologist form the T&F staff and work in:– 3 labs in the Time and frequency metrology.– 2 labs in the RF and µW metrology.
• Give support in:– 3 labs in electrical metrology.
• Participating in SIM Working Groups:– Time and Frequency (MWG 5)– Statistics and Uncertainty (MWG 13)
2015-01-29 6
Laboratory EquipmentLaboratory Equipment
• Three commercial Cesium beam clock.• 2 GPS multichannel receiver (TTS-2 and SIM system).• 1 multichannel measurement system.• 1 frequency offset generator.• 2 GPSDO.• 2 signal distributors (10 MHz and 1 PPS).• 3 Universal counters (1 Hz to 225 MHz).• 2 signal generators (1 Hz to 3 GHz).
2015-01-29 7
Laboratory EquipmentLaboratory Equipment
• 2 optical tachometers.• 1 Chronometer.• 1 Oscilloscope.• 1 Time and frequency acquisition card.• 2 NTP server.• 1 Web server.• 3 Time server by voice.• Software for calibration and verification automation.
2015-01-29 8
Time and Frequency metrology activitiesTime and Frequency metrology activities
• T&F activities are performed in three laboratories but only its quality system, meanwhile we move to the new building.
• The laboratories are under the Electromagnetic Magnitudes Coordination and are:– Time and Frequency Primary Laboratory.– Time and Frequency Secondary Laboratory.– Time and Frequency Dissemination Laboratory.
2015-01-29 9
T&F T&F Primary LaboratoryPrimary Laboratory
2015-01-29 10
T&F T&F Primary LaboratoryPrimary Laboratory
• Maintenance of the National Time and Frequency Standards and the National Time.
• Realization and improvement of the UTC(CNMP), UTCr(CNMP) and the SIMT(CNMP).
• Provide traceability and support to the CENAMEP laboratories.
• Development of software to automatize the laboratory process.
• Participate in the UTC, UTCr and SIMT comparisons.
2015-01-29 11
T&F T&F Primary LaboratoryPrimary Laboratory
• Comparison between the Cesium clock and each clock with UTC(CNMP).
• Implementation of a linear prediction methodology to adjust of UTC(CNMP) using the UTCr and the SIMT.
• Implementation of a timescale algorithm (evaluating the implementation of the CENAM, ONRJ and SIMT algorithms).
• Insert leaps seconds when the IERS indicate (one in June of this year).
2015-01-29 12
T&F Secondary LaboratoryT&F Secondary Laboratory
2015-01-29 13
T&F Secondary LaboratoryT&F Secondary Laboratory
• Provide calibration in T&F services under the ISO 17025.• Development of new calibration method seeking to
lower the costs and uncertainty calibration.• Development of software to automatize the laboratory
process.• Achieve new CMC in the BIPM database.• Calibration and measurement knowledge transfer
(trainings).• Support the traceability of secondary laboratories
through calibrations.
2015-01-29 14
T&F Dissemination LaboratoryT&F Dissemination Laboratory
2015-01-29 15
T&F Dissemination LaboratoryT&F Dissemination Laboratory
• Dissemination of the National Time - UTC(CNMP).• Development new time transfer methods to
disseminate the time and frequency.• Support the traceability of the CENAMEP laboratories
through the dissemination of the 10 MHz and the 1 PPS signals.
• Participate in the SIM NTP comparison.
2015-01-29 16
Other T&F activitiesOther T&F activities
• Participation in national and international congresses and symposiums.
• Participation in the national media (TV, radio and newspaper).
• Collaboration with other NMI in T&F technical and quality activities.
• Participation in T&F activities of the SIM and BIPM.• Collaboration with national government agencies (time
stamping, digital signature, time reference for government activities, expert for time coding interpretation, etc.) .
2015-01-29 17
Service T&F statsService T&F stats
• UTC(CNMP) is ± 70 ns since January 2013 (Circular T).• Tachometer and chronometer calibration are the most
demanded service (more that the 70% of the calibrations).
• Oscillator calibration is the less demanded (2 per year).• More that 7 clients of NTP synchronization service (one
year contract per client).• Web Clock page is visited near to 6 000 per day.
2015-01-29 18
Laboratory weaknessLaboratory weakness• The majority of the equipment has been continuously
working for over 10 years (2 cesium clocks, TTS-2 receiver, counters, signal distributors, UPS, etc.).
• Physical space and electrical capabilities are still limited.• Need for more coordination with national authorities.• Little recognition by the general public (Panama's
population is near to 4 millions).
2015-01-29 19
Actual workActual work• Software for the automatic report process to the BIPM
(monthly and weekly files).• The CENAMEP Time Scale (the SIMT algorithm is now
being evaluated as a candidate to be the base algorithm).
• New calibration services: time delay (generators and cables), oscilloscopes and heart monitors (electrocardiogram and heartbeat counters).
• This year we need to conduce a new peer review to demonstrate the vitality of our CMC.
• Establish a law for the Panama time zone and the country´s legal National Time.
2015-01-29 20
Future workFuture work• Keep the UTC(CNMP) under the ± 25 ns range.• New calibration services: remote standards calibration
and stroboscopes.• Include new CMCs in BIPM database.• A multi chronometer and tachometer calibration
system (more that 4 units per round). • A VoiP time dissemination service.• A Time and Frequency Group web page for the
CENAMEP.
2015-01-29 21
