tilting drum blender for 100 to 400 l containers

MIXOMAT CMIXOMAT CTilting drum blenderfor 100 to 400 l containers

2

MIXOMAT CTilting drum blender for 100 to 400 l containers

GENERAL REMARKS

· MIXOMAT C type drum blenders are available in two electrically tilting versions:

MIXOMAT C-SE: Economic version with tilting housing, suitable for most applications. This version isn’t suitable for clean-room applications. Double-sided version also available.

MIXOMAT C-HE: High-End version for clean rooms or for highest possible performance with tilting sealed shaft and closed housing.

Only one-sided Version possible.

· Standard containers of 100 to 400 litres available (with type C-HE 150 to 400 litres)

ELECTRICALLy TILTING C-SE TypE MIXOMAT

Execution· Stove enamelled steel standard housing (RAL 6017) or stainless steel St.1.4301 (ground finish, grain size 320)· Shaft with ball-bearings, sealed bearing housing· With chain transmission· Available as one- or double-sided blender· Version mounted on wheels available (C-SE1 and C-SE2)· ATEX version available for zone 2/22 or 1/21· PLC control with integrated 4” color-touch-screen· Controller languages: English, German, French, Spanish and Dutch

Sizes as follows:

Type Container (litres) power [kW] Max. working load [kg]

Art.-numberlacquered

Art. numberstainless steel

C-SE1 100 0,55 100 kg M-CSE1-0400 M-CSE1-0450

C-SE2 > 100 – 200 0,75 200 kg M-CSE2-0400 M-CSE2-0450

C-SE3 > 200 – 400 1,5 400 kg M-CSE3-0400 M-CSE3-0450

MIXOMAT C-SE, position „up“

MIXOMAT C-SE, position „down“

3


C-SE type MIXOMAT blender with second holder, position „up“

The blender may also be fitted with a second holder. Being only tiltable on one side, the second holder should rather be used for containers with a maximum capacity of 25 litres.

Double-sided type C-SE MIXOMAT blenders

C-SE type MIXOMAT blender with second holder, position „down“

4


Execution· Stove enamelled steel standard housing (RAL 6017) or stainless steel St.1.4301 (ground finish, grain size 320)· Shaft with ball-bearings, sealed bearing housing· Drive with worm geared motor· Electrical vertical movement with linear drive· ATEX version available for zone 2/22 or 1/21· Version mounted on wheels available (C-HE2)· PLC control with integrated 7” color-touch-screen· Controller languages: English, German, French, Spanish and Dutch, others on request.

Sizes as follows:

ELECTRICALLy TILTING C-HE TypE MIXOMAT

C-HE type MIXOMAT blender, position „up“

C-HE type MIXOMAT blender, position „down“

Type Container (litres) power [kW]

Max. working load [kg]

Art.-numberlacquered


C-HE2 > 150 – 200 1,1 200 M-C-HE2-0400 M-C-HE2-0450

C-HE3 > 200 – 400 2,2 400 M-C-HE3-0400 M-C-HE3-0450

5


WHEEL MOuNTING

Swivelling roller Levelling foot

Size 1 and 2 MIXOMAT blenders can also be supplied on wheels. They are placed on an underframe fitted with levelling feet or rollers with brakes (2 fixed and 2 swivelling).

Housing Execution Art. number

C-SE1 Lacquered steel M-C1-2040

C-SE1 Stainless steel M-C1-2042

C-SE2/C-HE2 Lacquered steel M-C2-2040

C-SE2/C-HE2 Stainless steel M-C2-2042

Following standard executions are available:

6


SpK type spanset belt holder

Following standard container holders are available:

HRK type half collar holder

Very easy to use holder. Safe holding is guaranteed by one quick-action clamping fastener with a special safety lock-ing system preventing any undesired opening of the fastener.Following standard container sizes are available:

V [l] D [mm] H [mm] Type Art. numbergalvanised


100 450 665 HRK 100 M-C-0365 M-C-0366

150 560 665 HRK 150 M-C-0371 M-C-0372

200 560 870 HRK 200 M-C-0374 M-C-0375

300 770 799 HRK 300 M-C-0380 M-C-0381

400 770 997 HRK 400 M-C-0383 M-C-0384

The container is held on the holder by means of two spanset belts. This very price worthy holder is used when only a few daily or weekly blendings have to be carried out. The spanset belts allow a great amount of drum diameter (- 100 mm) and height (+ 30/ - 10 mm) tolerances. They have been specially developed for the type of holder and are very easy to use. Spanset belts are available for the following container sizes:



100 450 665 SP 100 M-C-0565 M-C-0566

150 560 665 SP 150 M-C-0571 M-C-0572

200 560 870 SP 200 M-C-0574 M-C-0575

CONTAINER HOLDERS fOR C-SE AND C-HE MIXOMAT bLENDERS

Closed type holder

Open type holder

7


bV type holder (opposite side)

BV type container holders available as a standard for following container sizes:


Art. numberstainless steell

3 * 200 175 BV 3 M-A-0253 M-A-0254

5 180 200 BV 5 M-A-0256 M-A-0257

6 * 200 270 BV 6 M-A-0259 M-A-0260

10 250 270 BV 10 M-A-0262 M-A-0263

14 * 275 330 BV 14 M-A-0265 M-A-0266

20 315 280 BV 20 M-A-0268 M-A-0269

25 315 330 BV 25 M-A-0271 M-A-0272

*) Plastic drums

Container placed on the holder base. Hose clamp simply swung down onto the holder and clamped with the quick-action clamping fastener. Adjustable stamp in the middle of the clamp to press onto the container cover and to fine adjust the container height. Customised container holders available. BV type holders are available in galvanised or stainless steel.

CONTAINERSFollowing standard fuCHS containers are available:

Stainless steel containers

200-litre drum

Execution: · Stainless steel St.1.4301, bright as rolled finish

Option: · Stainless steel St.1.4435, electrolytic polished, seal welded handles

Delivery: · Drum, cover, tension ring, silicon seal, optional baffle fixed under the cover (electrolytic polish for faster and better blending

8


Container sizes:

V [l] D [mm] H [mm] Art. number1.4301

Art. number1.4435

100 450 665 M-B-0015 M-B-0017

150 560 665 M-B-0020 M-B-0022

200 560 870 M-B-0025 M-B-0027

300 770 799 M-B-0030 M-B-0032

400 770 997 M-B-0035 M-B-0037

bAffLE

for container V [l]

Art. number1.4301

Art. number1.4435

100 M-B-0082 M-B-0083

150, 200 M-B-0084 M-B-0085

200, 400 M-B-0086 M-B-0086

Basically it is possible to install on the same drum holder drums of the same or smaller diameter. Therefore we pro-pose an adapting system. It consists on a construction mainly manufactured from polypropylene and can be clipped easily on the holder.

ADApTER TypE AD-HRK fOR SMALLER DRuMS TO bE INSTALLED ON STANDARD HOLDERS

9


HolderHRK

Container[l]

Type HRK

Art. number. HRK

100 90 AD100/90HRK M-B-1830

100 60 AD100/60HRK M-B-1834

100 50 AD100/50HRK M-B-1838

100 30 AD100/30HRK M-B-1842

120 100 AD120/100HRK M-B-1846

120 90 AD120/90HRK M-B-1850

120 60 AD120/60HRK M-B-1854

120 50 AD120/50HRK M-B-1858

120 30 AD120/30HRK M-B-1862

150 100 AD150/100HRK M-B-1866

150 90 AD150/90HRK M-B-1870

150 60 AD150/60HRK M-B-1874

150 50 AD150/50HRK M-B-1878

150 30 AD150/30HRK M-B-1882

200 120 AD200/120HRK M-B-1890

200 100 AD200/100HRK M-B-1894

200 90 AD200/90HRK M-B-1898

200 60 AD200/60HRK M-B-1902

200 50 AD200/50HRK M-B-1906

200 30 AD200/30HRK M-B-1910

220 200 AD220/200HRK M-B-1914

220 150 AD220/150HRK M-B-1918

220 120 AD220/120HRK M-B-1922

220 100 AD220/100HRK M-B-1926

220 90 AD220/90HRK M-B-1930

220 60 AD220/60HRK M-B-1934

220 30 AD220/30HRK M-B-1938

300 150 AD300/150HRK M-B-1942

300 100 AD300/100HRK M-B-1946

300 90 AD300/90HRK M-B-1950

300 60 AD300/60HRK M-B-1954

300 50 AD300/50HRK M-B-1958

300 30 AD300/30HRK M-B-1962

400 200 AD400/200HRK M-B-1970

400 150 AD400/150HRK M-B-1974

400 120 AD400/120HRK M-B-1978

400 100 AD400/100HRK M-B-1982

400 90 AD400/90HRK M-B-1986

400 60 AD400/60HRK M-B-1990

400 50 AD400/50HRK M-B-1994

400 30 AD400/30HRK M-B-1998

Adapter sizes

10


C-SE AND C-HE TypE MIXOMAT SAfETy DEVICES

To prevent accidents fuCHS advises its customers to install safety devices such as metal or photoelectric barriers equipped with safety switches to be connected to the control unit or to a similar device fitted with safety switches connected to the control unit by means of two terminals (only one being used with one-sided blenders).

Protection cages may also be supplied by FUCHS.

Features of standard executions for stationary units:

· Access to blending containers through two swing doors· Magnetic safety limit switch· Easy to install· PMMA plankings

Safety cages for C-SE and C-HE type MIXOMAT blenders (stationary execution)


Housing frame Dimensions [mm] Type Art. number

C-SE1 Steel 880x1280x2030 SB1CS M-B1-0110

C-SE1 Stainless Steel 880x1280x2030 SB1SS M-B1-0115

C-SE2/C-HE2 Steel 1030x1560x2030 SB2CS M-B2-0110

C-SE2/C-HE2 Stainless Steel 1030x1560x2030 SB2SS M-B2-0115

C-SE3/C-HE3 Steel 1230x1630x2030 SB3CS M-B3-0110

C-SE3/C-HE3 Stainless Steel 1230x1630x2030 SB3SS M-B3-0115

11


Tilting, open „down“

Tilting, open

Tilting, closed

Tilting protection cage for C-SE and C-HE type MIXOMAT blenders (mobile execution)

Features of standard executions for mobile units:

· Access to blending containers through two swing doors· Magnetic safety limit switch· Compact execution · Easy opening and closing thanks to gas spring support· PMMA plankings

Housing frame for containers up to Type Art. number

C-SE1 Steel 50 l SMB1CS M-B1-0120

C-SE1 Stainless Steel 50 l SMB1SS M-B1-0125

C-SE1 Steel 120 l SMB1CS M-B1-0130

C-SE1 Stainless Steel 120 l SMB1SS M-B1-0135

C-SE2/C-HE2 Steel 220 l SMB2SS M-B2-0120

C-SE2/C-HE2 Stainless Steel 220 l SMB2SS M-B2-0125


12


Double-side protection for C-SE type MIXOMAT

Features of standard executions for stationary units:

· Access to blending containers through two swing doors· Magnetic safety limit switch· Easy to install· PMMA plankings

Housing frame Type Art. number

C-SE1 Steel S2B1CS M-B1-0310

C-SE1 Stainless Steel S2B1SS M-B1-0315

C-SE2/C-HE2 Steel S2B2CS M-B2-0310

C-SE2/C-HE2 Stainless Steel S2B2SS M-B2-0315

C-SE3/C-HE3 Steel S2B3CS M-B3-0310

C-SE3/C-HE3 Stainless Steel S2B3SS M-B3-0315


fuCHS Maschinen AG Englisberg 17 CH-1763 Granges-Paccot, Schweiz

Telefon +41 26 510 10 00 Fax +41 26 510 10 09 [email protected]

www.fuchsag.com Sta

nd:

2015-0

6-0

2

tilting drum blender for 100 to 400 l containers

Documents