tifa

tifa-lite

tifa

Form-Scaff is South Africa’s leading supplier of formwork, falsework and scaffolding to

the construction and civil engineering industries. Form-Scaff not only manufactures,

hires and sells world-class products, but also provides the design skills, technical advice

and support that comes with having almost 50 years experience and 30 branches locally

and internationally.

This indigenous expertise is complemented by the international depth and breadth of its

holding company, WACO International, a leading global commercial and industrial service

business focusing on the manufacturing, rental and sale of formwork, falsework and

scaffolding equipment as well as the burgeoning re-locatable and modular buildings industry.

WACO International operates in Africa, the UK, Australia, New Zealand and Chile.

Form-Scaff is a division of WACO Africa (Pty) Ltd, a joint venture company owned by

WACO International and respected local black empowerment company, Kagiso.

Disclaimer: Copyright in this catalogue vests in Form-Scaff, a division of Waco Africa (Proprietary) Limited (”Form-Scaff”) and extends inter alia, to the making of copies in whole or in part without the prior written consent of Form-Scaff.

While every effort has been made to ensure the accuracy of the information in this catalogue, we cannot accept responsibility for any errors which may occur as a result of reliance on the contents of this catalogue and are not liable for any loss of any nature that may be incurred as a result of such reliance. Details of any of the products may change without prior notice.

The customer must ensure that ‘good practice’ is adopted on site by competent persons and that the products shown in this catalogue are erected, used and stripped in accordance with the relevant Codes of Practice and the OHS Act and Regulations 85 of 1993. This catalogue does not contain any design detail but lists and depicts the items available under this product range. The responsibility for design is the responsibility of the customer.

Australia New Zealand South Africa South AfricaSouth AfricaUnited Kingdom

AustraliaSouth Africa

Saudi Arabia

Angola

Zambia

South Africa

Mauritius

Formwork, Shoring& Scaffolding WACO WORLDWIDE Modular &

Relocatable Buildings

The new generation wall

formwork system

Page 4 Panels

Page 6 Secondary Panels

Page 8 Alignment Bars, Stop-end Hooks

& Levelling Jacks

Page 10 Clamps

Page 11 Ties

Page 12 Propping System & Working Platforms

Page 14 Single Sided Walls

Page 16 Lifting

Page 18 Climbing

Page 20 Manhandled system of choice

Page 22 Panels

Page 24 Secondary Panels

Page 26 Alignment Bars, Stop-end Hooks

& Levelling Jacks

Page 28 Clamps

Page 29 Clamps & Ties

0 Propping System

Page 31 Propping System & Working Platforms

Page 32 Lifting

Page 34 Climbing

Page 36 Circular Formwork

Contact Details

Page 37 Head Office & Branches

Contents

1

tifa

tifa-lite

2

The Tifa system is a new generation wall formwork solution.

It is a heavy duty, crane handled system for large areas and the Panels

are designed to withstand concrete pressures of up to 60kN/m2.

The system is steel framed and timber-faced to produce high quality

finishes. Erecting and dismantling the formwork is quick and easy.

Being quick and easy, Tifa translates into real labour and hire time

savings.

• Rigid heavy duty hollow-section steel frame for robust site

conditions.

• High grade hot dip galvanising for durability/long life.

• Standard SA 600mm wide modules (150mm increments).

• Compatible with Tifa-Lite, Econo-Form as well as other

European systems.

• Straight and circular applications available.

• Gang-forms and lifting applications available.

• Full range of safety features.

• High quality 21mm WISA-Form Combi plywood facing.

• 60kN/m2 permissible concrete pressure.

tifa

General Assembly

tifa

Scaffold Tube Handrail

Working Platform and Toe Board

Access Bracket

Prop Tie

Alignment Bar

Fixed Clamp

Tifa Panel

Levelling Jack

Push-pull Prop

Swivel Foot

4

Tifa Panels Tifa Panels are used to form the straight sides of

concrete walls.

CODE DESCRIPTION MASS(kg)

5110027 TIFA PANEL 900 x 300 29.0

5110065 TIFA PANEL 900 x 450 36.0

5110029 TIFA PANEL 900 x 600 46.0

5110064 TIFA PANEL 900 x 900 63.0

5105012 TIFA PANEL 1200 x 300 37.0

5105020 TIFA PANEL 1200 x 450 46.0

5105011 TIFA PANEL 1200 x 600 58.0

5105010 TIFA PANEL 1200 x 900 78.0

5105000 TIFA PANEL 1200 x 1200 96.0

5105005 TIFA PANEL 2700 x 300 76.0

5105006 TIFA PANEL 2700 x 450 93.0

5105004 TIFA PANEL 2700 x 600 113.0

5105003 TIFA PANEL 2700 x 900 148.0

5105002 TIFA PANEL 2700 x 1200 195.0

5105001 TIFA PANEL 2700 x 2400 440.0

OTHER SIZES AvAILABLE ON SPECIAL REqUEST Ex OUR FACTORy

Panels

Plastic Plugs & Steel Tie Hole Sleeves Plastic Plugs are used to seal the tie holes that are not in use.

Steel Tie Hole Sleeves are inserted into each tie hole to provide

a neat finish around each hole and also to protect the plywood

edges around the hole.


5110301 STEEL TIE HOLE SLEEvE 26 (21 BOARD) 0.01

5110300 PLASTIC PLUG (21/15) 0.01

Tifa Panels vary in size to accommodate a wide

range of wall heights and lengths.

Plastic Plug

Steel Tie Hole Sleeve

Internal Corner Panel

Alignment Bar

Fixed Clamp

Twin Profile Infill

Adjustable Clamp

Dywidag Tie System

External Corner Panel

Tifa Panel

Hinged Splay Panel

tifa

General Assembly

6

Hinged Splay PanelsTifa Hinged Splay Panels are used to connect two Tifa Panels

together at any angle from 70o to 250o, both on the internal and

external faces of a splayed concrete wall.

Secondary Panels

External Corner PanelsTifa External Corner Panels are used to connect two Tifa Panels

together at 90o to each other at the external corners of a concrete

wall.




5110028 TIFA ExTERNAL CORNER PANEL 900 10.5




5110017 TIFA INTERNAL CORNER PANEL 900 x 300 x 300 39.0




5110070 TIFA HINGED SPLAy PANEL 900 x 300 x 300 51.0




Internal Corner PanelsTifa Internal Corner Panels are used to connect two Tifa Panels

together at 90o to each other at the internal corners of a

concrete wall.

The Tifa Hinged

Splay Panels do

not have tie holes

Stripping Bars & Stripping Bar Extensions8mm Thick Tifa Stripping Bars are used at Tifa Panel joints to facilitate

the stripping of Tifa Panels in confined areas. Tifa Stripping Bar

Extensions are used to extend the length of the Stripping Bars

within the Tifa Panels.


5110049 TIFA STRIPPING BAR 950 8.5





5110053 TIFA STRIPPING BAR ExTENSION 900 8.1





tifa

No end hammering plate on the ends

of the Tifa Stripping Bar extension

Holes for levers to

assist with stripping

L’s to locate the Stripping Bar up

against the back of Tifa Panels


5110132 TIFA TWIN PROFILE INFILL 900 8.0



Twin Profile InfillsTifa Twin Profile Infills are used to support a plywood infill

between two Tifa Panels.

Angle Iron Lugs with holes for self tapping

screws to secure the plywood facing in position

Ef-Ti PanelsEf-Ti Panels are used to join Tifa Panels to Econo-Form Panels.

They are fixed to the Tifa Panels using Tifa Adjustable Clamps and

to the Econo-Form Panels using Tee and Wedge sets.

Econo-Form Panel

punched flat

The Tifa Ef-Ti Panels

do not have tie-holes

Tifa-Lite periphery

profile


5110120 EF-TI PANEL 900 x 150 10.1

5110121 EF-TI PANEL 1200 x 150 13.1

5110122 EF-TI PANEL 2700 x 150 28.8

Levelling JacksTifa Levelling Jacks are used to level the bottom edge of Tifa

Panels along their length. They are attached to the Tifa Panels

using the Alignment Bar Clamps.

Alignment BarsTifa Alignment Bars are available in two lengths, 920mm and

1220mm. They are used to align the Tifa Panels, afford backing

for timber infill between the Panels and to stiffen joints when the

Panels are lifted.




5110015 TIFA ALIGNMENT BAR 920 11.5


5110034 TIFA ALIGNMENT BAR CLAMP 1.9

5110206 TIFA STOP-END HOOK 1.1

5110203 TIFA LEvELLING JACK 10.5

Stop-end HooksTifa Stop-end Hooks are used to secure the Tifa Alignment Bars

in position when the Alignment Bars are used to support the

stop-end of a concrete wall.

8

Alignment Bars, Stop-end Hooks and Levelling Jacks

Tifa Alignment Bar Clamp

Dywidag Combi Nuts or Tifa Wing

Nuts complete with Washer may be

used with the Stop-end Hook

36mm A/F spanner is required

100mm run-out max

Hooks fit over the 16mm dia.

attachment pins in the Panels

Tifa Alignment Bar

is clamped over the

Panel joint to keep the

Panels in a straight line

Application - Stop-ends

Application 2 - Alignment and Levelling

tifa

Levelling Jack

Tifa Twin Profile Infill

Tifa Alignment Bar

Tifa Panel

Tifa Stop-end Hook

Dywidag Combi Nut

Max 100mm thread adjustment

10

Tifa-Euro ClampTifa-Euro Clamps are used to connect Tifa Panels to other

European Systems.

Clamps

Fixed ClampsTifa Fixed Clamps are used to fix two Tifa Panels together.




5110001 TIFA FIxED CLAMP 3.7

5110004 TIFA ADJUSTABLE CLAMP 6.3

5110250 TIFA-EURO CLAMP 5.3

Adjustable ClampTifa Adjustable Clamps are used to fix Tifa Panels together

where Stripping Bars or an infill is used between the Panels.

They are also used to clamp the External Corner Panels, Internal

Corner Panels and Hinged Splay Panels into position.

Ties15mm Diameter Dywidag Bars with Dywidag Combi Nuts or Tifa Wing

Nuts complete with Washers are to be used with the Tifa System.



5405077 DyWIDAG BAR 15mm 500 0.7

5405078 DyWIDAG BAR 15mm 1000 1.5

5405079 DyWIDAG BAR 15mm 1500 2.2

5405085 DyWIDAG BAR 15mm 2000 2.9

5405086 DyWIDAG BAR 15mm 2500 3.6

5405087 DyWIDAG BAR 15mm 3000 4.3

5405088 DyWIDAG BAR 15mm 3500 5.1

5405089 DyWIDAG BAR 15mm 4000 5.8

5405092 DyWIDAG BAR 15mm 4500 6.5

5405093 DyWIDAG BAR 15mm 5000 7.2

5405094 DyWIDAG BAR 15mm 5500 8.0

5405095 DyWIDAG BAR 15mm 6000 8.7

5110032 TIFA WING NUT 1.8

5110035 WASHER 100 x 100 x 6 0.5

5110150 DyWIDAG COMBI NUT 1.2

5125028 TIFA TOP TIE BRACKET 1.8

Top Tie BracketsTifa Top Tie Brackets fit onto the periphery profile of the Tifa

Panels. They are used to keep the ties, over the top of the Tifa

Panels, in place.

tifaTies

Dywidag Bar complete with Combi Nut

Top Tie Bracket

Application - Ties

Dywidag Combi Nut

100 x 100 x 6 Washer

Slot for the Dywidag Bar

Tifa Wing Nut

Dywidag Bar complete with

Combi Nut

Dywidag Bar

12

Propping System and Working Platforms

Prop Connecting BracketsTifa Prop Connecting Brackets are used to attach the 4200, 3100

or 2500 long Tifa Push-pull Props and Tifa Prop Ties to the Tifa Panels.


5110012 TIFA PROP CONNECTING BRACKET 2.5

Prop Connecting Brackets HDTifa Prop Connecting Brackets HD are used to attach the 5700

long Tifa Push-pull Props to the Tifa Panels.


5110057 TIFA PROP CONNECTING BRACKET HD 5.0

Swivel FootThe Tifa Swivel Foot is used at the base of the Push-pull Props

and Prop Ties to connect the ends of the Props together.


5110008 TIFA SWIvEL FOOT 200 x 150 3.4


Pins and R-ClipTifa Connecting Pins 16 x 90 complete with R-Clips are used to

connect a Prop to the Connecting Brackets and Swivel Foot.


PinR-Clip

5110090 TIFA CONNECTING PIN 16 x 90 0.2

5110059 R-CLIP 0.01

Access BracketsTifa Access Brackets are used to provide access for site personnel.

Tifa Access Brackets are not to be used as a loading platform.

Push-pull Props and Prop TiesTifa Push-pull Props and Tifa Prop Ties are used to plumb

the Tifa Panels.




5110100 TIFA PROP TIE 8.4

5110007 TIFA PUSH-PULL PROP 2500 14.0




5110110 TIFA WALER BRACKET 2.0

5110010 TIFA ACCESS BRACKET 12.0

Waler BracketsTifa Waler Brackets are used to fix the scaffold tube to the Tifa

Panels. The Tifa Waler Brackets hook onto the 16mm diameter

attachment pins located in the Tifa Panels.

tifa

Always attach

safety handrails

Attach working

platform and Toe B

oard here

Support Frame HD WalersTifa Support Frame HD Walers are used to hold the Frames

down at the base of a concrete wall (using cast-in anchors).

Support FramesThe crane handled Tifa Support Frames are used to secure the

Tifa Wall Panels in position and also eliminate the need for

through ties.


5110087 TIFA SUPPORT FRAME 3700 300.0

5110088 TIFA SUPPORT FRAME ExTENSION 1900 150.0


5110091 TIFA SUPPORT FRAME HD WALER 1200 28.0

5110089 TIFA SUPPORT FRAME HD WALER 2400 55.0

HD Waler Hook BoltsThe Frames are fixed to the Tifa Panels using Tifa Alignment

Bars and Tifa HD Waler Hook Bolts.

14

Single Sided Walls

Tifa Support Frame Extension 1900

Tifa HD Waler Hook Bolt

Dywidag Combi Wing Nut

Tifa Support Frame 3700

The shutter is plumbed using the

built-in Tifa Support Frame Plumbing

Jack (240mm max. adjustment)

The frames must be laced and braced together

using 50x50 Half Couplers or Flange Couplers

and Scaffold Tube

5110123 TIFA HD WALER HOOK BOLT 2.0

5110150 DyWIDAG COMBI WING NUT 1.14


Tifa Panel Tifa Support Frame 3700

Scaffold Tube

Bracing

Tifa Support Frame

HD Waler 1200

Tifa Support Frame

Extension 1900

Tifa Support Frame

Plumbing Jack

Tifa Fixed Clamp

Alignment Bar and HD

Waler Hook Bolt

Application - Single Sided Tifa

tifa

Dywidag Combi Wing Nut

Scaffold Tube

Lacing

Lifting HooksThe Tifa Lifting Hook is used to lift the Tifa system and must

preferably be used in conjunction with the Tifa Lifting Beam.



5110018 TIFA LIFTING HOOK 7.7

5110093 TIFA LIFTING BEAM 3300 C/W CHAINS 175.0

Lifting BeamsTifa Lifting Beams are preferably used in conjunction with the

Tifa Lifting Hooks and chain slings to lift the Tifa System.

16

Lifting

Application - Lifting Hooks

Six lug positions, at a spacing of 600mm,

to locate the two vertical (1250mm long)

chain slings that are provided with each

Lifting Beam

Attach the crane slings here

A gravity lock ensures that they are safely

fixed to the periphery of the Tifa Panels

Two top lifting lugs are

fitted with D shackles

for the crane slings

Application - Lifting

Contact your nearest Form-Scaff branch for information about lifting the Tifa system

tifa

1250mm long Chain Sling

Crane Sling

Tifa Lifting Beam

Tifa Panel

Alignment Bar

Tifa Lifting Hook

Form Hanging BracketsForm Hanging Brackets are used to provide access for site

personnel and to recover the Anchor Screws from previous

concrete pours.

Anchor ScrewsAnchor Screws are used to keep the Form Wall Brackets

in position.





2965901 ANCHOR SCREW 120 0.58

2965902 ANCHOR SCREW 200 1.0

2965903 ANCHOR SCREW 280 1.1

2965904 ANCHOR SCREW 430 4.0

5110099 FORM WALL BRACKET 3.9

5405023 FORM SUPPORT BRACKET 25.7

5405024 FORM HANGING BRACKET 23.9

Form Wall BracketsForm Wall Brackets are used to support the Form

Support Brackets.

Form Support BracketsWhen climbing the Tifa system, Form Support Brackets are

used to support the Tifa system at various levels of the climb.

18

Climbing

Hole for the grade 8.8

set screw

Attach access platform here

Fit the safety

handrails here

Attach the safety

handrail here

Attach the working

platform here

Attach the Hanging Access here

Hole for the grade 8.8 set screw

Application - Climbing

tifa

Tifa Access Bracket

with safety handrail

Tifa Panel

Form Support Bracket

with safety handrail

Push-pull Prop

Working Platform

with Toe Board

Form Hanging

Bracket with

safety handrail

20

Tifa-Lite is the system of choice for manhandled formwork. With less

components than traditional Econo-Form panels, Tifa-Lite will save you

time and effort on formwork assembly. The high quality WISA-Form

plywood delivers superior finishes.

1200 / 1500 / 2700 height modules

System Features

• Lightweight hollow-section steel frame for easy handling.

• High grade hot dip galvanising for durability/long life.

• Standard SA 600mm wide modules (150mm increments).

• Compatible with Tifa, Econo-Form as well as other

European systems.

• Straight and circular applications available.

• Gang-forms and lifting applications available.

• Full range of safety features.

• High quality 15mm WISA-Form plywood.

• 60kN/m2 permissible concrete pressure.

tifa-lite

General Assembly

tifa-lite


Working Platform and Toe Board

Access Bracket

Prop Tie

Crab Clamp

Dywidag Bar

complete with

Combi Nut

Tifa-Lite Panel

Push-pull Prop

Swivel Foot

22

Panels Tifa-Lite Panels are used to form the straight sides of

concrete walls.

Panels

Plastic Plugs & Steel Tie Hole Sleeves Plastic Plugs are used to seal the tie holes that are not in use.

Steel Tie Hole Sleeves are inserted into each tie hole to provide

a neat finish around each hole and also to protect the plywood

edges around the hole.


5110302 STEEL TIE HOLE SLEEvE 21 (15 BOARD) 0.01

5110300 PLASTIC PLUG (21/15) 0.01

The Tifa-Lite Panels vary in size

to accommodate a wide range

of wall heights and lengths.

Plastic Plug

Steel Tie Hole Sleeve

tifa-lite

Application - Tifa-Lite System

Internal Corner Panel

Twin Profile Infill

Crab Clamp

Dywidag Tie System

Top Tie Bracket

External Corner Panel

Tifa-Lite Panel

Hinged Splay Panel

24

Hinged Splay PanelsTifa Hinged Splay Panels are used to connect two Tifa-Lite

Panels together at any angle from 70o to 250o, both on the

internal and external faces of a splayed concrete wall.

Secondary Panels

External Corner PanelsExternal Corner Panels are used to connect two Tifa-Lite Panels

together at 90o to each other at the external corners of a concrete

wall.
















Internal Corner PanelsInternal Corner Panels are used to connect two Tifa-Lite Panels

together at 90o to each other at the internal corners of a

concrete wall.

The Hinged

Splay Panels

do not have

tie holes

Stripping Bars & Stripping Bar Extensions8mm Thick Tifa Stripping Bars are used at Tifa-Lite Panel joints to

facilitate the stripping of Tifa-Lite Panels in confined areas. Tifa

Stripping Bar Extensions are used to extend the length of the

Stripping Bars within the Tifa-Lite Panels.

Ef-Ti PanelsEf-Ti Panels are used to join Tifa-Lite Panels to Econo-Form Panels.

They are fixed to the Tifa-Lite Panels using Tifa-Lite Fixed Clamps

and to the Econo-Form Panels using Tee and Wedge sets.




5110120 EF-TI PANEL 900 x 150 10.1

5110121 EF-TI PANEL 1200 x 150 13.1

5110122 EF-TI PANEL 2700 x 150 28.8















Twin Profile InfillsTifa Twin Profile Infills are used to support a plywood infill

between two Tifa-Lite Panels.

tifa-lite

Econo-Form Panel

punched flat

No end hammering plate on the ends

of the Tifa Stripping Bar extension

Holes for levers to

assist with stripping

L’s to locate the Stripping Bar up

against the back of Tifa-Lite Panels

Angle Iron Lugs with holes for self tapping

screws to secure the plywood facing in position

Tifa-Lite periphery

profile

Levelling JacksTifa-Lite Levelling Jacks are used to level the bottom edge of

Tifa-Lite Panels along their length.

Alignment Bars Tifa Alignment Bars are available in two lengths, 920mm and

1220mm. They are used to align the Tifa-Lite Panels, afford

backing for timber infill between the Tifa-Lite Panels and to stiffen

joints when the Panels are lifted from the horizontal position by

crane.






5110034 TIFA ALIGNMENT BAR CLAMP 1.9

5110206 TIFA STOP-END HOOK 1.1

5125035 TIFA-LITE LEvELLING JACK 8.0

Stop-end HooksTifa Stop-end Hooks are used to secure the Tifa Alignment Bars

in position when the Alignment Bars are used to support the

stop-end of a concrete wall.

26


Hooks fit over the

16mm dia. attachment

pins in the Panels

Dywidag Combi Nuts or Tifa Wing

Nuts complete with Washer may be

used with the Stop-end Hook

Tifa Alignment Bar Clamp

36mm A/F spanner is required

100mm run-out max


Tifa Twin Profile Infill

Tifa-Lite Panel

Application - Stop-ends

Stop-end Hook

Dywidag Combi Nut

Tifa Alignment Bar to support

the Stop-end

tifa-lite

28

Tifa-Lite Crab ClampThe Tifa-Lite Crab Clamp may be used to fix Tifa-Lite Panels side

by side. They are also used to clamp the External Corner Panels,

Internal Corner Panels and Hinged Splay Panels into position.

Clamps

Fixed ClampsTifa-Lite Fixed Clamps are used to fix two Tifa-Lite

Panels together.



5125010 TIFA-LITE FIxED CLAMP 4.4

5125019 TIFA-LITE ADJUSTABLE CLAMP 6.4


5125034 TIFA-LITE CRAB CLAMP 1.7

Adjustable ClampTifa-Lite Adjustable Clamps are used to fix Tifa-Lite Panels

together where Stripping Bars or an infill is used between the

Panels. They are also used to clamp the External Corner Panels,

Internal Corner Panels and Hinged Splay Panels into position.


5110250 TIFA EURO CLAMP 5.3

Tifa-Euro ClampThe Tifa-Euro Clamp is used to connect Tifa-Lite Panels to other

European Systems.

Clamps and Ties

Ties15mm Diameter Dywidag Bars with Dywidag Combi Nuts or Tifa

Wing Nuts complete with Washers are to be used with the Tifa

System.


5125028 TIFA TOP TIE BRACKET 1.8


5405077 DyWIDAG BAR 15mm 500 0.7

5405078 DyWIDAG BAR 15mm 1000 1.5

5405079 DyWIDAG BAR 15mm 1500 2.2

5405085 DyWIDAG BAR 15mm 2000 2.9

5405086 DyWIDAG BAR 15mm 2500 3.6

5405087 DyWIDAG BAR 15mm 3000 4.3

5405088 DyWIDAG BAR 15mm 3500 5.1

5405089 DyWIDAG BAR 15mm 4000 5.8

5405092 DyWIDAG BAR 15mm 4500 6.5

5405093 DyWIDAG BAR 15mm 5000 7.2

5405094 DyWIDAG BAR 15mm 5500 8.0

5405095 DyWIDAG BAR 15mm 6000 8.7

5110032 TIFA WING NUT 1.8

5110035 WASHER 100 x 100 x 6 0.5

5110050 DyWIDAG COMBI NUT 1.2

Top Tie BracketsTifa Top Tie Brackets fit onto the periphery profile of the Tifa-Lite

Panels. They are used to keep the ties, over the top of the

Tifa-Lite Panels, in place.

Dywidag Combi Nut

100 x 100 x 6 Washer

Slot for the Dywidag Bar

Tifa Wing Nut

Dywidag Bar

tifa-lite

30

Propping System

Push-pull Props and Prop TiesTifa Push-pull Props and Tifa Prop Ties are used to plumb the

Tifa-Lite Panels.

Swivel FootThe Tifa Swivel Foot is used at the base of the Push-pull Props

and Prop Ties to connect the ends of the Props together.

Pins and R-ClipTifa Connecting Pins 16 x 90 complete with R-Clips are used to

connect a Prop to the Connecting Brackets and Swivel Foot.




5110100 TIFA PROP TIE 8.4





5110090 TIFA CONNECTING PIN 16 x 90 0.1

5110059 R-CLIP 0.01

Pin

R-Clip

Access BracketsTifa-Lite Access Brackets are used to provide access for

site personnel.

Prop Connecting Brackets (Stiffener)Tifa-Lite Prop Connecting Brackets (Stiffener Type) are used to

attach the 4200, 3100 or 2500 long Tifa Push-pull Props and

Tifa Prop Ties to the Tifa-Lite Panels. The Brackets clamp onto any

Tifa-Lite Panel stiffener and anywhere along the length of the

Panel stiffener.



5125029 TIFA-LITE PROP CONNECTING BRACKET 1.3

(STIFFENER TyPE)

5110110 TIFA WALER BRACKET 2.0


5125027 TIFA-LITE ACCESS BRACKET 14.1

Waler BracketsTifa Waler Brackets are used to fix the scaffold tube to the

Tifa-Lite Panels. The Tifa Waler Brackets hook onto the 16mm

diameter attachment pins located in the Tifa-Lite Panels.

Propping System and Working Platforms

Always attach

safety handrails

Attach working

platform here

Attach Toe Board here

tifa-lite

Lifting HooksThe Tifa-Lite Lifting Hook is used to lift the Tifa-Lite system and

must preferably be used in conjunction with the Tifa Lifting Beam.



5125023 TIFA-LITE LIFTING HOOK 3.3

5110093 TIFA LIFTING BEAM 3300 C/W CHAINS 175.0

Lifting BeamsTifa Lifting Beams are preferably used in conjunction with the

Tifa-Lite Lifting Hooks to lift the Tifa-Lite System.

32

Lifting

Application - Lifting Hooks

Attach the crane sling here

Gravity Pin

The Tifa-Lite Lifting Hooks are designed to lock themselves

into position with the aid of a ‘Gravity Pin’. The Tifa-Lite Lifting

Hooks are connected to the Panel by inserting the ‘Gravity Pin’

through the 22mm dia. hole in the Panel periphery.

Six lug positions, at a spacing of 600mm,

to locate the two vertical (1250mm long)

chain slings that are provided with each

Lifting Beam

Two top lifting lugs are

fitted with D shackles

for the crane slings

Application - Lifting

Contact your nearest Form-Scaff branch for information about lifting the Tifa-Lite system

1250mm long Chain Sling

Crane Sling

Tifa Lifting Beam

Tifa-Lite Panel

Tifa-Lite Lifting Hook

tifa-lite

Form Hanging BracketsForm Hanging Brackets are used to provide access for site

personnel and to recover the Anchor Screws from previous

concrete pours.

Anchor ScrewsAnchor Screws are used to keep the Form Wall Brackets

in position.





2965902 ANCHOR SCREW 200 1.0

2965903 ANCHOR SCREW 280 1.1

5110099 FORM WALL BRACKET 3.9

5405023 FORM SUPPORT BRACKET 25.7

5405024 FORM HANGING BRACKET 23.9

Form Wall BracketsForm Wall Brackets are used to support the Form

Support Brackets.

Form Support BracketsWhen climbing the Tifa-Lite system, Form Support Brackets are

used to support the Tifa-Lite system at various levels of the climb.

34

Climbing

Hole for the grade 8.8

set screw

Attach access platform here

Fit the safety

handrails here

Attach the safety

handrail here

Attach the working

platform here

Attach the Hanging Access here

Hole for the grade 8.8 set screw

Application - Climbing


Form Hanging Bracket

Push-pull Prop

Form Support Bracket

complete with

safety handrail

Working Platform with Toe Board

Dywidag Tie

System

Tifa-Lite Panel

Form Wall Bracket

tifa-lite

36

Circular Formwork

Flex PanelsTifa-Lite Flex Panels are used to form radiused concrete walls.

Flex WalersTifa-Lite Flex Walers are located over each tie hole in the Flex

Panels. The tie is located through the opening in the Waler.


5125016 TIFA-LITE FLEx PANEL 1200x200 14.0









Application - Circular Formwork

Tifa-Lite Flex Panels are fixed to the Tifa-Lite Panels

using Tifa-Lite Crab Clamps

A turnbuckle is used to adjust the ‘Flex’

of the Panel face


5125011 TIFA-LITE FLEx WALER 8.9

Contact Details

Toll Free Helpline - Technical Advice Centre: 0800 20 50 29

RUSTENBURGP.O. Box 6996, Rustenburg, 03003 Ferro Street, RustenburgTel 014 538-2540, Fax 014 538-0087

SECUNDAP.O. Box 3781, Secunda, 23021 Winkelhaak Road, McGill Ext, EvanderTel 017 632-4230, Fax 017 632-4234

VEREENIGINGP.O. Box 1010, vereeniging, 1930Cnr Telford & van Riebeeck Street, DuncanvilleTel 016 455-1611, Fax 016 455-1566

WITBANKP.O. Box 3869, Witbank, 10352 Colliery Street, WitbankTel 013 690-2833, Fax 013 656-3713

COASTAL BRANCHES

BALLITOP.O. Box 715, Umhlali, 4390Labora Terra Industrial Park, Shakas Rock Road, BallitoTel 032 947-9430, Fax 032 947-0583

CAPE TOWNP.O. Box 37068, Chempet, 74426 Drill Avenue, Montague GardensTel 021 528-6500, Fax 021 551-1743

DURBAN SOUTHP.O. Box 485, Umbogintwini, 412016 Stroude Place, IsipingoTel 031 902-2677, Fax 031 902-2771

EAST LONDONP.O. Box 2734, Beacon Bay, 52055 Ray Craib Crescent, Beacon BayTel 043 748-2558, Fax 043 748-3691

GEORGEP.O. Box 218, Hartenbos, 6520Cnr Albert Street & Bridge Road, GeorgeTel 044 695-0294, Fax 044 695-1040

KZN REGIONAL OFFICE P.O. Box 33, New Germany, 3620178-180 Old Main Road, PinetownTel 031 713-9700 Fax 031 713-9715

MARGATEP.O. Box 1171, Margate, 4275Industrial Road, MargateTel 039 317-1708, Fax 039 317-4073

NEWCASTLEP.O. Box 906, Newcastle, 294022 Schonland Street, Industrial SitesTel 034 375-7697, Fax 034 375-6935

PIETERMARITZBURGP.O. Box 21946, Mayors Walk, 3208Market Road Ext, MkondeniTel 033 346-1767, Fax 033 346-1753

PORT ELIZABETHP.O. Box 2112, North End, 60564 Kendle Street, Neave Industrial AreaTel 041 453-2317, Fax 041 453-2524

RICHARDS BAYP.O. Box 1333, Richards Bay, 3900111 Aluminia Alley, Alton Industrial NorthTel 035 751-1140, Fax 035 751-1094

STRANDP.O. Box 1654, Somerset West, 7129Chilwan Crescent,Helderberg Industrial ParkTel 021 845-4090, Fax 021 845-4091

INTERNATIONALBRANCHES

CHILE - COPIAPORio Copiapo, 1949Plaza Comercio 2, Modulo 8 – Panamericana Norte, Copiapo, ChileTel +565 254 1561

CHILE - SANTIAGOCerro Portezuelo, 9801 Parque Industrial Portezuelo, quilicura, Santiago de ChileTel +562 738-5019Fax +562 738-6521

GHANA - ACCRAPlot L16, Accra Tema Motorway,Off Spintex Road,Motorway Industrial Area,Accra, GhanaCell +27 82 829 6627

MAURITIUS - PORT LOUISP.O. Box 748, Bell village, Port Louis WesternPlaine Lauzun Industrial EstateTel +230 211-0391Fax +230 211-0392

NAMIBIA - SWAKOPMUNDP.O. Box 2484, Swakopmund,36 Hidipo Hamutenya Street, SwakopmundTel +26464 46-2020Fax +26464 46- 2050

NAMIBIA - WINDHOEKP.O. Box 20286, Windhoek, 90005 Nickel Street, ProsperitasTel +26461 23-3693Fax +26461 23-3272

HEAD OFFICE

P.O. Box 669, Isando, 1600181 Barbara Road, ElandsfonteinTel 011 842-4000, Fax 011 842-4280

INLAND BRANCHES

BLOEMFONTEINP.O. Box 6610, Bloemfontein, 930022 Wilhelm Kotze Street, OoseindeTel 051 432-5555, Fax 051 432-4477

BURGERSFORTP.O. Box 2918, Burgersfort, 1150 Plot 2484, Ext 23 Dirk Winterbach Street, BurgersfortTel 013 004-0200

JOHANNESBURG EASTP.O. Box 26994, Boksburg, 1462Tunney Road, Gate 3, ElandsfonteinTel 011 842-4215, Fax 011 842-4111

JOHANNESBURG - KYA SANDP.O. Box 2884, Honeydew, 204040 Homestead Avenue, Kya SandTel 011 708-2227, Fax 011 708-1159

KATHUP.O. Box 1235, Kathu, 844633 Kalk Street, Industrial Area, KathuTel 053 723-2194, Fax 053 723-1078

KUSILEP.O. Box 4466, Pretoria, 0001Kusile Power Station, Balmoral Road, MpumalangaTel 082 578-4638

LEPHALALEP.O. Box 7495, Onverwaght, 0557Rietspruit Plot 23, Portion 46 Witkop Road, LephalaleTel 014 763-7982, Fax 014 763-7982

NELSPRUITP.O. Box 4485, Nelspruit, 1200Erf 379, Rocky DriftTel 013 758-1036, Fax 013 758-1063 POLOKWANEP.O. Box 3979, Polokwane, 070062 Goud Street, Laboria, PolokwaneTel 015 293-0450, Fax 015 293-0460

PRETORIAP.O. Box 4466, Pretoria, 0001Park Lane North, Highway Business Park, RooihuiskraalTel 012 621-9900, Fax 012 621-9931

WACO AFRICA / HEAD OFFICE: PO Box 669, Isando, 1600. 181 Barbara Road, Elandsfontein. Tel 011 842-4000, Fax 011 842-4280

Technical Advice Centre 0800 20 50 29 / 011 842-4011

tifa

Documents

waco international

shoring scaffolding

division of waco africa

sale of formwork

catalogue vests

propping systempage

international depth

secondary panels page