thorlux light line -...
TRANSCRIPT
l Extruded aluminium body and die cast ends finished light textured silver (RAL 9006)l High performance LG7:2005 (<1500cd/m2 @ 65o) optical systeml Direct/indirect illuminationl High efficiency satinised polycarbonate uplight diffuserl Single and twin lamp versions in same body profilel Supplied fully assembledl Two miniaturised easily adjustable wire suspensions suppliedl 3.5m supply lead fittedl Fitted with 4000K lamp(s)
SPECIFICATION
ACCESSORY
APPROX. DESCRIPTION CAT. No. kg
Surface wiring tidy LL 13361 0.4
STA
ND
ARD
NOMINAL APPROX. SIZE (mm) LAMP CAT. No. kg CIRCUIT
1 x 28W T5 LL 13337D 4.9
1200 2 x 28W T5 LL 13338D 5.0
1 x 35W T5 LL 13339D 5.3 2 x 35W T5 LL 13340D 5.4
1500 1 x 49W T5 LL 13341D 5.3
2 x 49W T5 LL 13342D 5.4
1 x 28W T5 LL 13331 4.9 J/D/T
1200 2 x 28W T5 LL 13332 5.0 J/D/T
1 x 35W T5 LL 13333 5.3 J/D/T 2 x 35W T5 LL 13334 5.4 J/D/T
1500 1 x 49W T5 LL 13335 5.3 J/D/T
2 x 49W T5 LL 13336 5.4 J/D/T
SMA
RT
RANGE
Individual luminaire comprises:Pre-wired body assembly complete with fitted end caps, 4 or 8 core flying-lead, louvre, uplight diffuser and two sliding wire suspensions.
INFORMATION
Smart Micro-Pod
DIMENSIONS
28W - 127635W - 157649W - 1576
120
56
165
40
Smart Micro-pod
828
Individually suspended direct/indirect T5 luminaires THORLUX LIGHT LINE
Web Link: Smart System
IP20 T5
CIRCUIT TYPE - suffix catalogue number with: J - non-dimming (HF fluorescent) / D - dimming (1-10V) / T - dimming (DSI) e.g. LL 13331J etc. Smart versions use digital dimming gear and are always suffixed D
EMERGENCY VERSION - prefix catalogue number with: ELL - Emergency / TLL - AutoTest e.g. ELL 13331J etc. Emergency and AutoTest versions add 0.7kg to weights listed.
Dec ‘12 www.thorlux.com/suspended 73
l Extruded aluminium body and die cast ends finished light textured silver (RAL 9006)l High performance LG7:2005 (<1500cd/m2 @ 65o) optical systeml Direct/indirect illuminationl High efficiency satinised polycarbonate uplight diffuserl Continuously mounted using link kitsl Single and twin lamp versions in same body profilel Supplied fully assembledl Supplied with easily adjustable wire suspensions and fitted plug and socket connectionsl Fitted with 4000K lamp(s)
ACCESSORIES
APPROX. DESCRIPTION CAT. No. kg
Link kit LL 13355 0.2
End kit 2 ends per kit LL 13360 1.3
Surface wiring tidy LL 13361 0.4
Corner joint kit LL 14285 4.0
End to end continuous system consists of luminaires joined with a link kit and finished with an end kit.
Continuous luminaire comprises:Body assembly with fitted plug and socket connections, louvre, uplight diffuser and one sliding wire suspension.
Link kit comprises: 40mm link extrusion and fasteners.
End kit comprises: Two die-cast ends, one wire suspension, one 8 core supply cable with fitted plugs.
INFORMATION
DIMENSIONS
28W - 118935W - 148949W - 1489
56
165
40
Smart Micro-pod
784
THORLUX LIGHT LINE Continuous suspended direct/indirect T5 luminaires
IP20 T5
SPECIFICATION
RANGE - Order luminaire type, end kit and link kits/infill sections as required
STA
ND
ARD
NOMINAL APPROX. SIZE (mm) LAMP CAT. No. kg CIRCUIT
1 x 28W T5 LL 13349D 4.4
1200 2 x 28W T5 LL 13350D 4.5
1 x 35W T5 LL 13351D 4.8 2 x 35W T5 LL 13352D 4.9
1500 1 x 49W T5 LL 13353D 4.8
2 x 49W T5 LL 13354D 4.9
1 x 28W T5 LL 13343 4.4 J/D/T
1200 2 x 28W T5 LL 13344 4.5 J/D/T
1 x 35W T5 LL 13345 4.8 J/D/T 2 x 35W T5 LL 13346 4.9 J/D/T
1500 1 x 49W T5 LL 13347 4.8 J/D/T
2 x 49W T5 LL 13348 4.9 J/D/T
CIRCUIT TYPE - suffix catalogue number with: J - non-dimming (HF fluorescent) / D - dimming (1-10V) / T - dimming (DSI) e.g. LL 13343J etc. Smart versions use digital dimming gear and are always suffixed D
EMERGENCY VERSION - prefix catalogue number with: ELL - Emergency / TLL - AutoTest e.g. ELL 13343J etc. Emergency and AutoTest versions add 0.7kg to weights listed.
NOTE: It is recommended that a maximum of 10 Light Line Continuous luminaires are connected to each 10A fused light circuit
SMA
RT
Web Link: Smart System
74 www.thorlux.com/suspended Dec ‘12
l Extruded aluminium finished light textured silver (RAL 9006)l Sections supplied assembled for rapid installation using easily adjustable wire suspensions, and fitted plug and socket connectionsl 1 x 20W CDM-Tm spotlight optionl Emergency Scanlight AT LED optionl Fitted with 4000K lamp(s)
ACCESSORIES
APPROX. DESCRIPTION CAT. No. kg
End kit 2 ends per kit LL 13360 1.3
Surface wiring tidy LL 13361 0.4
Corner joint kit LL 14285 4.0
Infill to infill / infill to joint link kit LL 14762 0.2
DIMENSIONS
INFILL SECTIONS
LENGTH APPROX. APPROX. 1 x 20W APPROX. (mm) PLAIN kg SCANLIGHT AT kg CDM-Tm SPOT s kg
750 LL 13356 2.3 LL 13434 2.9 LL 13467 3.1
1000 LL 13357 3.0 LL 13435 3.6
1269 LL 13358 3.5 LL 13436 4.1
1569 LL 13359 4.3 LL 13437 4.9 LL 13468 5.1
Continuous system consists of luminaires joined with an infill section (see table) or link kit and each run is finished with an end kit. Scanlight AT infill sections include a 3W LED Downlighter for emergency use. Interconnecting wiring allows control and communication.
Infill section comprises:Appropriate length of infill, interconnecting wiring, cover lid, fasteners and wire suspension.
End kit comprises:Two die-cast ends, one wire suspension, one 8 core supply cable with fitted plugs.
INFORMATION
750 / 1000 / 1269 / 1569
165
40
1 x 20WCDM-Tm
49
Scanlight ATversion only
Infills available with one fully adjustable spotlight using a
high efficiency, long life 20W CDM-Tm 3000K lamp (15min. hot re-strike). Electronic gear
and lamps fitted.
Infill sections THORLUX LIGHT LINE
IP20 T5
SPECIFICATION
Scanlight AT Emergency LED version
Web Link: Scanlight AT System
Dec ‘12 www.thorlux.com/suspended 75
sCannot be switched independently from luminaire
PHOTOMETRIC GUIDE SURFACE WIRING TIDY
TRANSVERSE AXIAL
CANDELAS PER 1000 LUMENS
80
160
240
320
80
TRANSVERSE AXIAL
CANDELAS PER 1000 LUMENS
80
160
240
320
80
1 x 28W D.L.O.R. 74% U.L.O.R. 20%
FACTOR: 1 x 35W = 0.95 1 x 49W = 0.87
2 x 28W D.L.O.R. 50% U.L.O.R. 27%
FACTOR: 2 x 35W = 1.00 2 x 49W = 0.99
4 = 1 -10V or Motionline5 = 1 -10V or Motionline6 = Scanlight AT DALI7 = Scanlight AT DALI
1 = Switched live2 = NeutralE = Earth3 = Un-switched live
Cable from luminaire Cable to mains
ACCESSORY DIMENSIONS
JOINT KITS - Continuous use only
Scanlight
40 56
165
1 x CDM-Tm Spot
4087
91
165
87dia.
Corner Joint Kitcontinuous use only
End Kit
40
16544
Link Kit
40
16540
Wiring Tidy
34
15583
665
665
165
Photometric Guide and Accessories
Corner Joint Crossover Joint Tee Joint
433
165
433
700
165
433
700
165700
APPROX. DESCRIPTION CAT. No. kg
Corner joint LL 14285 2.3
Corner joint (powered) LL 14286 2.8
Crossover joint LL 13599 4.3
Tee joint LL 13600 3.9
Certain configurations require powered corners. Please contact our Technical Department for further information.
76 www.thorlux.com/suspended Dec ‘12
TYPICAL SUSPENSION OPTIONS
Individual Luminaire- see page 73
Continuous Luminaire- see page 74
End Kit- 2 ends per kit
Link Kit- see page 74
In�ll Section- see page 75
Standardsuspension:maximum
drop 3.14m
Suggestedminimum
0.5m
Supply to oneend only
SLIDING SUSPENSIONCONTINUOUS ROWS USING SLIDING SUSPENSION
250 250
250 250 250
250 250
250 250 250
Sliding suspensions should be located a maximum of 250mm from either end.
Sliding suspension kits should be located a maximum of 250mm either side of joints or from ends. Maximum recommended centres 2.0 metres.
THORLUX LIGHT LINE
Dec ‘12 www.thorlux.com/suspended 77