thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · thickness...
TRANSCRIPT
![Page 1: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/1.jpg)
Thickness measurement report m/v " " Report No.
Office: Lithuania, Taikos ave 24-218, LT 91222, Klaipeda, tel. +370 46 205268 mk-centras.com, [email protected]
![Page 2: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/2.jpg)
Form code: AOSS 101 Revision: 2016-01 www.dnvgl.com Page 1 of 2© DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
Certificate No:AOSS0000D2N
This is to certify that
UAB matavimo centras
m. sav., Lithuania
is granted acceptance forThickness measurements on ships , in accordance with Class Programme DNVGL-CP-0484.
Category I: Authorised to do measurements on all types and sizes of ships
This service supplier certificate will be accepted for use with all rule sets published by DNV GL.See the following page(s) for details regarding application.
This Certificate is valid until 2020-05-21.
Issued at Klaipeda on 2017-05-22
for DNV GL
This document has been digitally signed and will therefore not have handwritten signatures
Uldukis, AndriusStation Manager
This Certificate may be withdrawn if:1. The service provided has been improperly carried out or the results improperly reported.2. The surveyor has found any deficiencies in the accepted operating systems of the service supplier.3. The firm has failed to inform of any major changes having effect on the quality of the service rendered.4. The conditions listed in the certificate are changed and/or are not fulfilled.
SAMPLE TM
REPORT
![Page 3: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/3.jpg)
Certificate No: AOSS0000D2N
Form code: AOSS 101 Revision: 2016-01 www.dnvgl.com Page 2 of 2
Application:1. Requirements stated in Class Programme no.DNVGL-CP-0484/2016;
2. Renewal audit conducted on 2017-05-02 by DNVGL Klaipeda;
3. UAB Klaipedos LM Centras is undertaking to notify this Society of any changes to procedures and personnel prior to changestaking effect.
4. Thickness measurements are conducted by following personnel:
Supervisors:
1. Dmitrij Košeliov;
2. Eduardas Ivanovas;
3. Gintaras
Operators:
1. Dmitrij Košeliov;
2. Eduardas Ivanovas;
3. Gintaras
4. Dmitrij Beliajev;
5. Edgaras Ivanovas;
6. Pavel Sonne;
7. Dmitrij Koval;
8. Romanas Prala;
9. Sergejs Timonovs;
10. Oleg Uskov.
SAMPLE TM
REPORT
![Page 4: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/4.jpg)
SAMPLE TM
REPORT
![Page 5: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/5.jpg)
SAMPLE TM
REPORT
![Page 6: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/6.jpg)
![Page 7: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/7.jpg)
22/05/2017 to
First date of measurement:
85 sheets.
Firm official stamp:
Details of measurement equipment:
Name of operator:
Signature of operator:
xxxxxxxxxxx
Qualification of operator:
Klaipedos laivu matavimo centras
DNV-GL
AOSS0000D2N
21/05/2020
xxxxxxxxxxxxxxxxxxxxxx
xx/xx/2017
xx/xx/2017
Renewal
Cygnus 4
Level II
Port of registry:
1149
1102
Date of build:
Gross tons:
Deadweight:
Ship's name:
IMO number:
Class identity number:
Thickness Measurement Report
General Particulars
xxxxxxx
Signature of surveyor:
-
xxxxxxx
xxxx
Norwegian Maritime DirectorateClassification society:
Place of measurement:
Last date of measurement:
Classification Society Official Stamp:
Report Number:
Date:
Name of surveyor:
xx.xx.2017
Renewal survey/intermediate/other survey due:
xxxxxxxx
Thickness measurement firm certified by:
Name of firm performing thickness measurement:
Consisting of
Approval No.:
Approval valid from
DNV UTM TemplateVersion date: 2007-11-23 General Particulars DNV UTM 2017.xls
![Page 8: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/8.jpg)
INDEX
1. MAIN DECK PLATING .................................................................................... 22. SIDE SHELL PLATING ................................................................................... 43. TRANSOM ...................................................................................................... 104. BOTTOM PLATING ......................................................................................... 115. INNER BOTTOM PLATING ............................................................................. 176. FR.18-22 ......................................................................................................... 277. CHAIN LOCKER FR.78-80 .............................................................................. 118. FR.22 .............................................................................................................. 299. FR.3 ................................................................................................................ 2910. FR.7 .............................................................................................................. 2911. CHAIN LOCKER FR.78 ................................................................................. 3012. CHAIN LOCKER FR.80 ................................................................................. 3213. FR.82 ............................................................................................................. 3414. FR.36 ............................................................................................................. 3515. FR.56 ............................................................................................................. 3616. FR.72 ............................................................................................................. 3717. FR.19 ............................................................................................................. 3818. SEACHEST ................................................................................................... 3919. FWT FR.4 ...................................................................................................... 3920. FWT FR.5 ...................................................................................................... 4021. FWT FR.6 ...................................................................................................... 4022. START AIR BOTTLES .................................................................................. 4123. CHAIN LOCKER BOTTOM PLATING ........................................................... 4124. FR.84 ............................................................................................................. 4125. UPPER TANK WEBS .................................................................................... 4226. FR.24 ............................................................................................................. 4327. FR.32 ............................................................................................................. 4428. FR.40 ............................................................................................................. 4529. FR.52 ............................................................................................................. 4630. FR.60 ............................................................................................................. 4731. FR.64 ............................................................................................................. 4932. FR.74 ............................................................................................................. 4933. FR.76 ............................................................................................................. 5034. FR.32 ............................................................................................................. 5135. FR.36 ............................................................................................................. 5136. FR.56 ............................................................................................................. 5237. TRANSVERSE SECTIONAL AREA OF HULL GIRDER FLANGE ................ 54
SKETCHES
![Page 9: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/9.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
MAIN DECK PLATING - -- -
N.A. N.A. Plate A1 S8 7.00 5.60 7.00 7.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A1 S8 7.00 5.60 7.00 7.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B1 S8 7.00 5.60 7.10 7.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B1 S8 7.00 5.60 7.00 7.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B1 S8 7.00 5.60 7.20 6.80 0.00 0.0% 0.20 2.9%N.A. N.A. Plate B1 S8 7.00 5.60 7.20 7.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate C1 S8 13.00 10.40 13.20 13.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate C1 S8 13.00 10.40 13.30 - 0.00 0.0%N.A. Upper tank Plate C1 S8 13.00 10.40 13.40 13.40 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C1 S8 13.00 10.40 13.30 13.20 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C1 S8 13.00 10.40 13.00 - 0.00 0.0%N.A. Upper tank Plate C2 S8 8.00 6.40 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C2 S8 8.00 6.40 7.80 7.90 0.20 2.5% 0.10 1.3%N.A. Upper tank Plate C2 S8 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C2 S8 8.00 6.40 7.80 8.00 0.20 2.5% 0.00 0.0%N.A. Upper tank Plate C2 S8 8.00 6.40 8.10 7.30 0.00 0.0% 0.70 8.8%N.A. Upper tank Plate C2 S8 8.00 6.40 8.00 7.60 0.00 0.0% 0.40 5.0%N.A. Upper tank Plate C2 S8 8.00 6.40 7.90 7.60 0.10 1.3% 0.40 5.0%N.A. Upper tank Plate C2 S8 8.00 6.40 7.80 7.40 0.20 2.5% 0.60 7.5%N.A. Upper tank Plate C3 S8 8.00 6.40 8.00 7.50 0.00 0.0% 0.50 6.3%N.A. Upper tank Plate C3 S8 8.00 6.40 8.50 8.20 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C3 S8 8.00 6.40 8.50 8.40 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C3 S8 8.00 6.40 8.50 8.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C3 S8 8.00 6.40 8.70 8.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C3 S8 8.00 6.40 8.50 8.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C3 S9 8.00 6.40 7.90 8.70 0.10 1.3% 0.00 0.0%N.A. Upper tank Plate C3 S9 8.00 6.40 8.20 7.70 0.00 0.0% 0.30 3.8%N.A. Upper tank Plate C3 S9 8.00 6.40 7.20 8.60 0.80 10.0% 0.00 0.0%N.A. Upper tank Plate C3 S9 8.00 6.40 7.00 - 1.00 12.5%N.A. Upper tank Plate C4 S9 8.00 6.40 7.70 8.20 0.30 3.8% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 8.10 7.60 0.00 0.0% 0.40 5.0%N.A. Upper tank Plate C4 S9 8.00 6.40 7.90 8.00 0.10 1.3% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 7.70 8.00 0.30 3.8% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 8.20 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate C4 S9 8.00 6.40 8.20 7.00 0.00 0.0% 1.00 12.5%N.A. Upper tank Plate C5 S9 8.00 6.40 7.50 7.90 0.50 6.3% 0.10 1.3%N.A. Upper tank Plate C5 S9 8.00 6.40 7.90 7.70 0.10 1.3% 0.30 3.8%N.A. Upper tank Plate C5 S9 8.00 6.40 7.60 7.70 0.40 5.0% 0.30 3.8%
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space /
Deck
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
Operator's Signature: Deck Page 2
![Page 10: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/10.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space /
Deck
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. Upper tank Plate C5 S9 8.00 6.40 7.60 7.60 0.40 5.0% 0.40 5.0%N.A. Upper tank Plate C5 S9 8.00 6.40 7.70 8.00 0.30 3.8% 0.00 0.0%N.A. Upper tank Plate C5 S9 8.00 6.40 7.90 8.00 0.10 1.3% 0.00 0.0%N.A. Upper tank Plate C6 S9 13.00 10.40 12.50 12.70 0.50 3.8% 0.30 2.3%N.A. Upper tank Plate C6 S9 13.00 10.40 12.80 12.70 0.20 1.5% 0.30 2.3%N.A. N.A. Plate C6 S9 13.00 10.40 12.90 12.60 0.10 0.8% 0.40 3.1%N.A. N.A. Plate C6 S9 13.00 10.40 12.50 - 0.50 3.8%N.A. N.A. Plate C7 S9 7.00 5.60 7.30 7.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate C7 S9 7.00 5.60 7.30 7.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A2 S9 7.00 5.60 7.20 6.90 0.00 0.0% 0.10 1.4%N.A. N.A. Plate A2 S9 7.00 5.60 7.00 7.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A2 S9 7.00 5.60 7.00 7.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A2 S9 7.00 5.60 7.10 7.00 0.00 0.0% 0.00 0.0%
Operator's Signature: Deck Page 3
![Page 11: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/11.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
SIDE SHELL PLATING - -- -
N.A. ER Plate HS5 S1-S2 18.50 14.80 18.70 18.80 0.00 0.0% 0.00 0.0%N.A. ER Plate HS5 S1-S2 18.50 14.80 18.60 18.50 0.00 0.0% 0.00 0.0%N.A. ER Plate HS5 S1-S2 18.50 14.80 18.60 0.00 0.0% -N.A. FWT Plate HS4 S1-S2 18.50 14.80 19.90 19.00 0.00 0.0% 0.00 0.0%N.A. FWT Plate HS4 S1-S2 18.50 14.80 19.90 19.00 0.00 0.0% 0.00 0.0%N.A. FWT Plate HS3 S1-S2 18.50 14.80 19.90 20.00 0.00 0.0% 0.00 0.0%N.A. ER Plate HS3 S1-S2 18.50 14.80 19.90 19.40 0.00 0.0% 0.00 0.0%N.A. ER Plate D1 S1-S2 7.50 6.00 7.40 7.90 0.10 1.3% 0.00 0.0%N.A. ER Plate D1 S1-S2 7.50 6.00 7.10 7.80 0.40 5.3% 0.00 0.0%N.A. ER Plate D1 S1-S2 7.50 6.00 7.30 0.20 2.7% -N.A. FWT Plate D1 S1-S2 7.50 6.00 7.70 7.90 0.00 0.0% 0.00 0.0%N.A. FWT Plate D1 S1-S2 7.50 6.00 7.60 7.80 0.00 0.0% 0.00 0.0%N.A. FWT Plate D1 S1-S2 7.50 6.00 7.60 0.00 0.0% -N.A. FWT Plate D1a S1-S2 13.00 10.40 13.00 - 0.00 0.0%N.A. ER Plate D1a S1-S2 13.00 10.40 12.90 13.00 0.10 0.8% 0.00 0.0%N.A. ER Plate D1a S1-S2 13.00 10.40 12.90 13.00 0.10 0.8% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 7.90 7.80 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 7.90 7.70 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 7.90 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 7.80 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 7.70 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 7.90 7.80 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 7.80 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 8.10 7.70 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 8.20 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate D2 S1-S2 7.50 6.00 8.10 0.00 0.0% -N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 7.60 7.80 0.40 5.0% 0.20 2.5%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 7.70 7.70 0.30 3.8% 0.30 3.8%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 8.00 7.80 0.00 0.0% 0.20 2.5%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 8.80 8.10 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 8.90 7.90 0.00 0.0% 0.10 1.3%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 8.90 7.80 0.00 0.0% 0.20 2.5%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 7.80 8.00 0.20 2.5% 0.00 0.0%N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 7.80 0.20 2.5% -N.A. DT DB 4 Plate D3 S1-S2 8.00 6.40 7.90 0.10 1.3% -N.A. Upper tank Plate D3 S1-S2 8.00 6.40 7.60 8.00 0.40 5.0% 0.00 0.0%N.A. Upper tank Plate D3 S1-S2 8.00 6.40 7.80 7.70 0.20 2.5% 0.30 3.8%N.A. Upper tank Plate D3 S1-S2 8.00 6.40 8.10 7.80 0.00 0.0% 0.20 2.5%N.A. Upper tank Plate D3 S1-S2 8.00 6.40 8.80 7.70 0.00 0.0% 0.30 3.8%N.A. Upper tank Plate D3 S1-S2 8.00 6.40 7.90 7.70 0.10 1.3% 0.30 3.8%N.A. Upper tank Plate D3 S1-S2 8.00 6.40 7.90 8.00 0.10 1.3% 0.00 0.0%
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
External structure
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
Operator's Signature: Side Page 4
![Page 12: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/12.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
External structure
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. Upper tank Plate D3 S1-S2 8.00 6.40 7.70 - 0.30 3.8%N.A. DT DB 4 Plate D4 S3-S4 8.00 6.40 7.80 7.90 0.20 2.5% 0.10 1.3%N.A. DT DB 3 Plate D4 S3-S4 8.00 6.40 7.90 8.10 0.10 1.3% 0.00 0.0%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 7.80 8.20 0.20 2.5% 0.00 0.0%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 7.80 8.10 0.20 2.5% 0.00 0.0%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 7.40 7.90 0.60 7.5% 0.10 1.3%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 7.70 8.10 0.30 3.8% 0.00 0.0%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 8.70 7.80 0.00 0.0% 0.20 2.5%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 7.60 8.00 0.40 5.0% 0.00 0.0%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 7.60 7.90 0.40 5.0% 0.10 1.3%N.A. Fuel tank Plate D4 S3-S4 8.00 6.40 7.90 0.10 1.3% -N.A. Upper tank Plate D4 S3-S4 8.00 6.40 8.00 7.70 0.00 0.0% 0.30 3.8%N.A. Upper tank Plate D4 S3-S4 8.00 6.40 7.80 7.80 0.20 2.5% 0.20 2.5%N.A. Upper tank Plate D4 S3-S4 8.00 6.40 7.80 7.70 0.20 2.5% 0.30 3.8%N.A. Upper tank Plate D4 S3-S4 8.00 6.40 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate D4 S3-S4 8.00 6.40 7.70 7.70 0.30 3.8% 0.30 3.8%N.A. Upper tank Plate D4 S3-S4 8.00 6.40 7.80 7.90 0.20 2.5% 0.10 1.3%N.A. DT DB 3 Plate D5a S3-S4 8.00 6.40 7.70 0.30 3.8% -N.A. Fuel tank Plate D5a S3-S4 8.00 6.40 7.80 8.00 0.20 2.5% 0.00 0.0%N.A. Fuel tank Plate D5a S3-S4 8.00 6.40 7.70 7.90 0.30 3.8% 0.10 1.3%N.A. DT DB 2 Plate D5a S3-S4 8.00 6.40 7.70 8.00 0.30 3.8% 0.00 0.0%N.A. DT DB 2 Plate D5a S3-S4 8.00 6.40 7.70 8.00 0.30 3.8% 0.00 0.0%N.A. DT DB 2 Plate D5a S3-S4 8.00 6.40 7.30 0.70 8.8% -N.A. Upper tank Plate D5a S3-S4 8.00 6.40 7.80 7.80 0.20 2.5% 0.20 2.5%N.A. Upper tank Plate D5a S3-S4 8.00 6.40 7.90 7.70 0.10 1.3% 0.30 3.8%N.A. Upper tank Plate D5a S3-S4 8.00 6.40 7.90 7.70 0.10 1.3% 0.30 3.8%N.A. DT DB 2 Plate D5 S3-S4 11.00 8.80 10.70 10.90 0.30 2.7% 0.10 0.9%N.A. DT DB 2 Plate D5 S3-S4 11.00 8.80 10.70 10.80 0.30 2.7% 0.20 1.8%N.A. DT DB 2 Plate D5 S3-S4 11.00 8.80 10.80 10.70 0.20 1.8% 0.30 2.7%N.A. DT DB 2 Plate D5 S3-S4 11.00 8.80 10.90 10.00 0.10 0.9% 1.00 9.1%N.A. DT DB 2 Plate D5 S3-S4 11.00 8.80 10.80 10.20 0.20 1.8% 0.80 7.3%N.A. DT DB 2 Plate D6 S5-S6 11.00 8.80 10.70 10.80 0.30 2.7% 0.20 1.8%N.A. DT DB 2 Plate D6 S5-S6 11.00 8.80 10.50 10.90 0.50 4.5% 0.10 0.9%N.A. DT DB 2 Plate D6 S5-S6 11.00 8.80 10.60 11.00 0.40 3.6% 0.00 0.0%N.A. DT DB 2 Plate D6 S5-S6 11.00 8.80 10.50 10.80 0.50 4.5% 0.20 1.8%N.A. DT DB 2 Plate D6 S5-S6 11.00 8.80 11.00 0.00 0.0% -N.A. DT DB 2 Plate D6 S5-S6 11.00 8.80 11.00 0.00 0.0% -N.A. DT DB 2 Plate D6 S5-S6 11.00 8.80 10.90 0.10 0.9% -N.A. DBT 1 Plate D6 S5-S6 11.00 8.80 10.90 10.50 0.10 0.9% 0.50 4.5%N.A. DBT 1 Plate D6 S5-S6 11.00 8.80 10.60 10.70 0.40 3.6% 0.30 2.7%N.A. Void space Plate D6 S5-S6 11.00 8.80 11.00 10.40 0.00 0.0% 0.60 5.5%N.A. Void space Plate D6 S5-S6 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%N.A. Void space Plate D6 S5-S6 11.00 8.80 10.50 - 0.50 4.5%
Operator's Signature: Side Page 5
![Page 13: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/13.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
External structure
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. Bow THR Plate D7 S5-S6 11.00 8.80 11.20 11.20 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate D7 S5-S6 11.00 8.80 11.30 11.30 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate D7 S5-S6 11.00 8.80 11.30 11.30 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate D7 S5-S6 11.00 8.80 11.30 0.00 0.0% -N.A. FPT Plate D7 S5-S6 11.00 8.80 11.10 11.20 0.00 0.0% 0.00 0.0%N.A. FPT Plate D7 S5-S6 11.00 8.80 11.10 11.10 0.00 0.0% 0.00 0.0%N.A. FPT Plate D7 S5-S6 11.00 8.80 11.20 - 0.00 0.0%N.A. FPT Plate D7 S5-S6 11.00 8.80 11.20 - 0.00 0.0%N.A. FPT Plate D8 S5-S6 11.00 8.80 11.40 10.60 0.00 0.0% 0.40 3.6%N.A. FPT Plate D8 S5-S6 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%N.A. FPT Plate D8 S5-S6 11.00 8.80 10.90 10.80 0.10 0.9% 0.20 1.8%N.A. FPT Plate D8 S5-S6 11.00 8.80 10.00 10.00 1.00 9.1% 1.00 9.1%N.A. FPT Plate D8 S5-S6 11.00 8.80 9.90 - 1.10 10.0%N.A. ER Plate E1 S1-S2 7.50 6.00 7.40 7.50 0.10 1.3% 0.00 0.0%N.A. ER Plate E1 S1-S2 7.50 6.00 7.40 7.40 0.10 1.3% 0.10 1.3%N.A. ER Plate E1 S1-S2 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate E1 S1-S2 7.50 6.00 7.50 7.40 0.00 0.0% 0.10 1.3%N.A. ER Plate E1 S1-S2 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate E1 S1-S2 7.50 6.00 7.50 - 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.60 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.50 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.50 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.60 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.40 7.90 0.10 1.3% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.60 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.70 7.80 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.90 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.70 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.80 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate E2 S1-S2 7.50 6.00 7.90 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 8.00 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 7.90 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 7.90 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 7.90 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 7.80 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 8.00 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 8.00 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 8.10 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 8.00 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 7.80 0.00 0.0% -N.A. ER Plate E2 S1-S2 7.50 6.00 7.10 0.40 5.3% -N.A. DT DB 2 Plate E5 S3-S4 11.00 8.80 10.90 10.80 0.10 0.9% 0.20 1.8%N.A. DT DB 2 Plate E5 S3-S4 11.00 8.80 10.80 - 0.20 1.8%
Operator's Signature: Side Page 6
![Page 14: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/14.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
External structure
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. Upper tank Plate E5 S3-S4 11.00 8.80 10.90 11.00 0.10 0.9% 0.00 0.0%N.A. Upper tank Plate E5 S3-S4 11.00 8.80 10.80 10.90 0.20 1.8% 0.10 0.9%N.A. Upper tank Plate E5 S3-S4 11.00 8.80 10.90 10.80 0.10 0.9% 0.20 1.8%N.A. Upper tank Plate E5 S3-S4 11.00 8.80 10.90 11.00 0.10 0.9% 0.00 0.0%N.A. DT DB 2 Plate E6 S5-S6 11.00 8.80 10.60 10.80 0.40 3.6% 0.20 1.8%N.A. DT DB 2 Plate E6 S5-S6 11.00 8.80 10.70 0.30 2.7% -N.A. Upper tank Plate E6 S5-S6 11.00 8.80 10.80 10.60 0.20 1.8% 0.40 3.6%N.A. Upper tank Plate E6 S5-S6 11.00 8.80 10.80 10.50 0.20 1.8% 0.50 4.5%N.A. Upper tank Plate E6 S5-S6 11.00 8.80 10.80 10.00 0.20 1.8% 1.00 9.1%N.A. Upper tank Plate E6 S5-S6 11.00 8.80 10.50 10.70 0.50 4.5% 0.30 2.7%N.A. Upper tank Plate E6 S5-S6 11.00 8.80 10.10 - 0.90 8.2%N.A. Void space Plate E6 S5-S6 11.00 8.80 10.50 10.70 0.50 4.5% 0.30 2.7%N.A. Void space Plate E6 S5-S6 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%N.A. Void space Plate E6 S5-S6 11.00 8.80 10.20 10.80 0.80 7.3% 0.20 1.8%N.A. Void space Plate E6 S5-S6 11.00 8.80 10.70 0.30 2.7% -N.A. Void space Plate E6 S5-S6 11.00 8.80 10.70 0.30 2.7% -N.A. Void space Plate E6 S5-S6 11.00 8.80 10.60 0.40 3.6% -N.A. Bow THR Plate E7 S5-S6 11.00 8.80 11.30 11.00 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate E7 S5-S6 11.00 8.80 11.20 11.00 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate E7 S5-S6 11.00 8.80 11.50 11.00 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate E7 S5-S6 11.00 8.80 11.30 0.00 0.0% -N.A. Bow THR Plate E7 S5-S6 11.00 8.80 11.30 0.00 0.0% -N.A. Bow THR Plate E7 S5-S6 11.00 8.80 11.40 0.00 0.0% -N.A. FPT Plate E7a S5-S6 11.00 8.80 11.00 10.60 0.00 0.0% 0.40 3.6%N.A. FPT Plate E7a S5-S6 11.00 8.80 10.40 10.80 0.60 5.5% 0.20 1.8%N.A. FPT Plate E7a S5-S6 11.00 8.80 10.70 0.30 2.7% -N.A. FPT Plate E7b S5-S6 11.00 8.80 10.80 10.90 0.20 1.8% 0.10 0.9%N.A. FPT Plate E7b S5-S6 11.00 8.80 10.80 10.90 0.20 1.8% 0.10 0.9%N.A. FPT Plate E8 S5-S6 11.00 8.80 10.30 10.80 0.70 6.4% 0.20 1.8%N.A. FPT Plate E8 S5-S6 11.00 8.80 10.50 10.90 0.50 4.5% 0.10 0.9%N.A. FPT Plate E8a S5-S6 11.00 8.80 10.40 10.90 0.60 5.5% 0.10 0.9%N.A. FPT Plate E8a S5-S6 11.00 8.80 10.60 10.90 0.40 3.6% 0.10 0.9%N.A. ER Plate F1 S1-S2 7.50 6.00 7.70 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate F1 S1-S2 7.50 6.00 7.70 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate F1 S1-S2 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate F1 S1-S2 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate F1 S1-S2 7.50 6.00 7.30 7.60 0.20 2.7% 0.00 0.0%N.A. ER Plate F1 S1-S2 7.50 6.00 7.40 0.10 1.3% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.30 8.00 0.20 2.7% 0.00 0.0%N.A. ER Plate F2 S1-S2 7.50 6.00 7.40 8.10 0.10 1.3% 0.00 0.0%N.A. ER Plate F2 S1-S2 7.50 6.00 7.30 8.00 0.20 2.7% 0.00 0.0%N.A. ER Plate F2 S1-S2 7.50 6.00 7.40 7.50 0.10 1.3% 0.00 0.0%N.A. ER Plate F2 S1-S2 7.50 6.00 7.40 7.40 0.10 1.3% 0.10 1.3%
Operator's Signature: Side Page 7
![Page 15: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/15.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
External structure
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. ER Plate F2 S1-S2 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate F2 S1-S2 7.50 6.00 8.60 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate F2 S1-S2 7.50 6.00 8.50 0.00 0.0% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.50 0.00 0.0% -N.A. ER Plate F2 S1-S2 7.50 6.00 8.50 0.00 0.0% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.40 0.10 1.3% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.50 0.00 0.0% -N.A. ER Plate F2 S1-S2 7.50 6.00 5.40 2.10 28.0% - To be renewedN.A. ER Plate F2 S1-S2 7.50 6.00 7.80 0.00 0.0% -N.A. ER Plate F2 S1-S2 7.50 6.00 8.50 0.00 0.0% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.30 0.20 2.7% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.10 0.40 5.3% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.20 0.30 4.0% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.40 0.10 1.3% -N.A. ER Plate F2 S1-S2 7.50 6.00 7.50 0.00 0.0% -N.A. Upper tank Plate F3 S1-S2 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 7.90 7.90 0.10 1.3% 0.10 1.3%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 7.90 8.10 0.10 1.3% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 7.60 8.20 0.40 5.0% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 7.90 8.20 0.10 1.3% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 7.80 8.10 0.20 2.5% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 7.90 8.00 0.10 1.3% 0.00 0.0%N.A. Upper tank Plate F3 S1-S2 8.00 6.40 7.80 8.00 0.20 2.5% 0.00 0.0%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 7.80 7.90 0.20 2.5% 0.10 1.3%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.00 7.80 0.00 0.0% 0.20 2.5%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 7.90 7.90 0.10 1.3% 0.10 1.3%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.10 7.80 0.00 0.0% 0.20 2.5%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.20 7.90 0.00 0.0% 0.10 1.3%N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.00 0.00 0.0% -N.A. Upper tank Plate F4 S3-S4 8.00 6.40 8.10 0.00 0.0% -N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.10 7.90 0.00 0.0% 0.10 1.3%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.10 7.90 0.00 0.0% 0.10 1.3%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.20 7.90 0.00 0.0% 0.10 1.3%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.20 8.00 0.00 0.0% 0.00 0.0%
Operator's Signature: Side Page 8
![Page 16: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/16.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
External structure
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.20 7.80 0.00 0.0% 0.20 2.5%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.20 7.80 0.00 0.0% 0.20 2.5%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.30 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F5 S3-S4 8.00 6.40 8.10 0.00 0.0% -N.A. Upper tank Plate F6 S5-S6 7.50 6.00 7.30 7.50 0.20 2.7% 0.00 0.0%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 7.70 10.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 7.60 7.40 0.00 0.0% 0.10 1.3%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 8.10 7.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 8.00 7.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 7.70 10.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 6.90 7.50 0.60 8.0% 0.00 0.0%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate F6 S5-S6 7.50 6.00 7.70 0.00 0.0% -N.A. Upper tank Plate F6 S5-S6 7.50 6.00 7.50 0.00 0.0% -N.A. Void space Plate F6 S5-S6 7.50 6.00 7.60 7.80 0.00 0.0% 0.00 0.0%N.A. Void space Plate F6 S5-S6 7.50 6.00 7.50 - 0.00 0.0%N.A. Bow THR Plate F7 S5-S6 7.50 6.00 7.70 7.50 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate F7 S5-S6 7.50 6.00 7.50 7.40 0.00 0.0% 0.10 1.3%N.A. Bow THR Plate F7 S5-S6 7.50 6.00 7.40 7.40 0.10 1.3% 0.10 1.3%N.A. Bow THR Plate F7 S5-S6 7.50 6.00 7.70 7.20 0.00 0.0% 0.30 4.0%N.A. Bow THR Plate F7 S5-S6 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. FPT Plate F7 S5-S6 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. FPT Plate F7 S5-S6 7.50 6.00 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. FPT Plate F7 S5-S6 7.50 6.00 7.60 8.00 0.00 0.0% 0.00 0.0%N.A. FPT Plate F7 S5-S6 7.50 6.00 7.60 8.00 0.00 0.0% 0.00 0.0%N.A. FPT Plate F7 S5-S6 7.50 6.00 8.30 8.00 0.00 0.0% 0.00 0.0%N.A. FPT Plate F7 S5-S6 7.50 6.00 7.40 0.10 1.3% -N.A. FPT Plate F7 S5-S6 7.50 6.00 7.60 0.00 0.0% -N.A. ER Plate G1 S1-S2 7.50 6.00 7.50 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate G1 S1-S2 7.50 6.00 7.40 7.30 0.10 1.3% 0.20 2.7%N.A. ER Plate G1 S1-S2 7.50 6.00 7.40 7.90 0.10 1.3% 0.00 0.0%N.A. ER Plate G1 S1-S2 7.50 6.00 7.40 8.00 0.10 1.3% 0.00 0.0%N.A. ER Plate G1 S1-S2 7.50 6.00 7.50 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate G1 S1-S2 7.50 6.00 7.60 8.00 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.30 7.50 0.20 2.7% 0.00 0.0%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.50 7.30 0.00 0.0% 0.20 2.7%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.60 7.50 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.40 7.20 0.10 1.3% 0.30 4.0%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.20 7.70 0.30 4.0% 0.00 0.0%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.70 7.60 0.00 0.0% 0.00 0.0%N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.60 0.00 0.0% -N.A. Upper tank Plate G6 S5-S6 7.50 6.00 7.60 0.00 0.0% -
Operator's Signature: Side Page 9
![Page 17: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/17.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
External structure
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. Bow THR Plate G7 S5-S6 7.50 6.00 7.60 7.80 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate G7 S5-S6 7.50 6.00 7.70 7.80 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate G7 S5-S6 7.50 6.00 7.50 7.80 0.00 0.0% 0.00 0.0%N.A. Bow THR Plate G7 S5-S6 7.50 6.00 7.50 0.00 0.0% -N.A. FPT Plate G7 S5-S6 7.50 6.00 8.00 7.80 0.00 0.0% 0.00 0.0%N.A. FPT Plate G7 S5-S6 7.50 6.00 8.10 7.90 0.00 0.0% 0.00 0.0%N.A. FPT Plate G7 S5-S6 7.50 6.00 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. FPT Plate G7 S5-S6 7.50 6.00 8.20 7.90 0.00 0.0% 0.00 0.0%N.A. FPT Plate G7 S5-S6 7.50 6.00 8.00 - 0.00 0.0%N.A. FPT Plate G7 S5-S6 7.50 6.00 8.00 - 0.00 0.0%
- -TRANSOM - -
- -N.A. ER Plate A1 S7 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate A1 S7 7.50 6.00 7.50 7.40 0.00 0.0% 0.10 1.3%N.A. ER Plate A1 S7 7.50 6.00 7.40 7.50 0.10 1.3% 0.00 0.0%N.A. ER Plate A2 S7 7.50 6.00 7.40 7.40 0.10 1.3% 0.10 1.3%N.A. ER Plate A2 S7 7.50 6.00 7.50 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate A2 S7 7.50 6.00 7.60 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate A2 S7 7.50 6.00 7.50 - 0.00 0.0%
Operator's Signature: Side Page 10
![Page 18: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/18.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
BOTTOM PLATING - -- -
N.A. ER Plate FK2 S1-S2 8.50 6.80 10.10 10.20 0.00 0.0% 0.00 0.0%N.A. ER Plate FK2 S1-S2 8.50 6.80 10.00 10.20 0.00 0.0% 0.00 0.0%N.A. ER Plate FK2 S1-S2 8.50 6.80 8.20 10.10 0.30 3.5% 0.00 0.0%N.A. ER Plate FK2 S1-S2 8.50 6.80 10.20 - 0.00 0.0%N.A. ER Plate FK2 S1-S2 8.50 6.80 8.20 - 0.30 3.5%N.A. ER Plate FK2 S1-S2 8.50 6.80 8.60 - 0.00 0.0%N.A. DBT 4 CT Plate FK2 S1-S2 8.50 6.80 8.20 0.30 3.5% -N.A. Fuel tank Plate FK2 S1-S2 8.50 6.80 7.70 - 0.80 9.4%N.A. DBT 4 CT Plate FK3 S1-S2 8.50 6.80 7.90 8.30 0.60 7.1% 0.20 2.4%N.A. DBT 4 CT Plate FK3 S1-S2 8.50 6.80 8.00 8.00 0.50 5.9% 0.50 5.9%N.A. DBT 4 CT Plate FK3 S1-S2 8.50 6.80 8.20 8.50 0.30 3.5% 0.00 0.0%N.A. DBT 4 CT Plate FK3 S1-S2 8.50 6.80 8.00 8.30 0.50 5.9% 0.20 2.4%N.A. DBT 4 CT Plate FK3 S1-S2 8.50 6.80 8.40 - 0.10 1.2%N.A. DBT 4 CT Plate FK3 S1-S2 8.50 6.80 8.30 - 0.20 2.4%N.A. DBT 4 CT Plate FK3 S1-S2 8.50 6.80 9.70 - 0.00 0.0%N.A. Fuel tank Plate FK3 S1-S2 8.50 6.80 8.40 - 0.10 1.2%N.A. DBT 4 CT Plate FK4 S3-S4 8.50 6.80 10.30 10.40 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate FK4 S3-S4 8.50 6.80 10.20 10.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate FK4 S3-S4 8.50 6.80 10.10 10.50 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate FK4 S3-S4 8.50 6.80 10.30 10.30 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate FK4 S3-S4 8.50 6.80 10.30 10.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate FK4 S3-S4 8.50 6.80 10.20 - 0.00 0.0%N.A. DT DB 3 Plate FK4 S3-S4 8.50 6.80 10.20 - 0.00 0.0%N.A. DT DB 3 Plate FK5a S3-S4 8.50 6.80 10.40 10.10 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate FK5a S3-S4 8.50 6.80 10.10 9.50 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate FK5a S3-S4 8.50 6.80 9.00 8.90 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate FK5b S3-S4 8.50 6.80 10.70 11.50 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate FK5b S3-S4 8.50 6.80 11.10 11.50 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate FK5b S3-S4 8.50 6.80 11.50 11.70 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate FK6 S5-S6 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%N.A. DT DB 2 Plate FK6 S5-S6 11.00 8.80 10.70 10.20 0.30 2.7% 0.80 7.3%N.A. DBT 1 Plate FK6 S5-S6 11.00 8.80 10.60 10.80 0.40 3.6% 0.20 1.8%N.A. DBT 1 Plate FK6 S5-S6 11.00 8.80 10.90 10.90 0.10 0.9% 0.10 0.9%N.A. DBT 1 Plate FK6 S5-S6 11.00 8.80 10.70 - 0.30 2.7%N.A. ER Plate A2 S1-S2 7.50 6.00 7.40 8.00 0.10 1.3% 0.00 0.0%N.A. ER Plate A2 S1-S2 7.50 6.00 7.50 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate A2 S1-S2 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate A2 S1-S2 7.50 6.00 7.90 8.10 0.00 0.0% 0.00 0.0%N.A. ER Plate A2 S1-S2 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. ER Plate A2 S1-S2 7.50 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. ER Plate A2 S1-S2 7.50 6.00 6.70 0.80 10.7% -N.A. ER Plate A2 S1-S2 7.50 6.00 6.50 1.00 13.3% -
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
External structure
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
Operator's Signature: Bottom Page 11
![Page 19: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/19.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
External structure
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. ER Plate A2 S1-S2 7.50 6.00 8.00 0.00 0.0% -N.A. ER Plate A2 S1-S2 7.50 6.00 7.40 0.10 1.3% -N.A. ER Plate A2 S1-S2 7.50 6.00 7.50 0.00 0.0% -N.A. ER Plate A2 S1-S2 7.50 6.00 7.80 0.00 0.0% -N.A. ER Plate A2 S1-S2 7.50 6.00 7.50 0.00 0.0% -N.A. DBT 4 CT Plate A2 S1-S2 7.50 6.00 7.40 8.10 0.10 1.3% 0.00 0.0%N.A. DBT 4 CT Plate A2 S1-S2 7.50 6.00 7.40 0.10 1.3% -N.A. Fuel tank Plate A2 S1-S2 7.50 6.00 8.20 - 0.00 0.0%N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 7.10 8.40 0.40 5.3% 0.00 0.0%N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 7.80 7.40 0.00 0.0% 0.10 1.3%N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 8.00 7.90 0.00 0.0% 0.00 0.0%N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 8.10 7.90 0.00 0.0% 0.00 0.0%N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 7.80 8.00 0.00 0.0% 0.00 0.0%N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 7.80 8.30 0.00 0.0% 0.00 0.0%N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 7.80 0.00 0.0% -N.A. DBT 4 CT Plate A3 S1-S2 7.50 6.00 8.00 0.00 0.0% -N.A. Fuel tank Plate A3 S1-S2 7.50 6.00 8.10 - 0.00 0.0%N.A. DT DB 4 Plate A3 S1-S2 7.50 6.00 7.40 8.00 0.10 1.3% 0.00 0.0%N.A. DT DB 4 Plate A3 S1-S2 7.50 6.00 7.90 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate A3 S1-S2 7.50 6.00 8.30 7.80 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate A3 S1-S2 7.50 6.00 8.00 - 0.00 0.0%N.A. DT DB 4 Plate A3 S1-S2 7.50 6.00 8.30 - 0.00 0.0%N.A. DB 4 CT Plate A4 S3-S4 7.50 6.00 7.80 8.30 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate A4 S3-S4 7.50 6.00 8.20 - 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.10 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 7.80 8.30 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.10 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.10 8.30 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.10 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.10 0.00 0.0% -N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.20 0.00 0.0% -N.A. DT DB 3 Plate A4 S3-S4 7.50 6.00 8.10 0.00 0.0% -N.A. DT DB 3 Plate A5a S3-S4 7.50 6.00 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A5a S3-S4 7.50 6.00 8.10 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A5a S3-S4 7.50 6.00 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate A5a S3-S4 7.50 6.00 8.00 - 0.00 0.0%N.A. DT DB 2 Plate A5a S3-S4 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate A5a S3-S4 7.50 6.00 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate A5b S3-S4 11.00 8.80 9.80 10.50 1.20 10.9% 0.50 4.5%
Operator's Signature: Bottom Page 12
![Page 20: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/20.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
External structure
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. DT DB 2 Plate A5b S3-S4 11.00 8.80 10.30 10.40 0.70 6.4% 0.60 5.5%N.A. DT DB 2 Plate A5b S3-S4 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%N.A. DT DB 2 Plate A5b S3-S4 11.00 8.80 10.10 10.50 0.90 8.2% 0.50 4.5%N.A. DT DB 2 Plate A5b S3-S4 11.00 8.80 10.80 10.30 0.20 1.8% 0.70 6.4%N.A. DT DB 2 Plate A6 S5-S6 11.00 8.80 10.20 10.20 0.80 7.3% 0.80 7.3%N.A. DT DB 2 Plate A6 S5-S6 11.00 8.80 10.80 10.60 0.20 1.8% 0.40 3.6%N.A. DT DB 2 Plate A6 S5-S6 11.00 8.80 10.40 10.30 0.60 5.5% 0.70 6.4%N.A. DT DB 2 Plate A6 S5-S6 11.00 8.80 10.00 10.40 1.00 9.1% 0.60 5.5%N.A. DT DB 2 Plate A6 S5-S6 11.00 8.80 10.50 10.50 0.50 4.5% 0.50 4.5%N.A. DBT 1 Plate A6 S5-S6 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%N.A. DBT 1 Plate A6 S5-S6 11.00 8.80 10.40 10.60 0.60 5.5% 0.40 3.6%N.A. DBT 1 Plate A6 S5-S6 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%N.A. DBT 1 Plate A6 S5-S6 11.00 8.80 10.70 - 0.30 2.7%N.A. Bow THR Plate A7 S5-S6 11.00 8.80 10.80 10.60 0.20 1.8% 0.40 3.6%N.A. Bow THR Plate A7 S5-S6 11.00 8.80 11.00 10.90 0.00 0.0% 0.10 0.9%N.A. Bow THR Plate A7 S5-S6 11.00 8.80 10.80 - 0.20 1.8%N.A. FPT Plate A7 S5-S6 11.00 8.80 10.90 10.50 0.10 0.9% 0.50 4.5%N.A. FPT Plate A7 S5-S6 11.00 8.80 9.80 10.10 1.20 10.9% 0.90 8.2%N.A. FPT Plate A7 S5-S6 11.00 8.80 10.30 0.70 6.4% -N.A. FPT Plate A8 S5-S6 11.00 8.80 10.20 10.10 0.80 7.3% 0.90 8.2%N.A. FPT Plate A8 S5-S6 11.00 8.80 10.00 10.30 1.00 9.1% 0.70 6.4%N.A. ER Plate B2 S1-S2 7.50 6.00 8.00 7.90 0.00 0.0% 0.00 0.0%N.A. ER Plate B2 S1-S2 7.50 6.00 8.00 7.90 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B2 S1-S2 7.50 6.00 8.00 7.90 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B2 S1-S2 7.50 6.00 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 7.90 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 8.30 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 7.90 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 8.00 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 7.10 8.10 0.40 5.3% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 7.40 7.70 0.10 1.3% 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 8.00 - 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 8.00 - 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 8.10 - 0.00 0.0%N.A. DT DB 4 Plate B3 S1-S2 7.50 6.00 8.20 - 0.00 0.0%N.A. DT DB 4 Plate B4 S3-S4 7.50 6.00 8.00 7.80 0.00 0.0% 0.00 0.0%N.A. DT DB 4 Plate B4 S3-S4 7.50 6.00 8.00 7.70 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 8.10 7.80 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 8.00 7.50 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 9.10 8.70 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 8.30 7.40 0.00 0.0% 0.10 1.3%
Operator's Signature: Bottom Page 13
![Page 21: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/21.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
External structure
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 7.80 7.90 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 7.60 8.70 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 7.80 7.50 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 7.80 - 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 8.60 - 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 7,,4 - -N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 8.50 - 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 7.70 - 0.00 0.0%N.A. DT DB 3 Plate B4 S3-S4 7.50 6.00 7.40 - 0.10 1.3%N.A. DT DB 3 Plate B5a S3-S4 7.50 6.00 7.80 8.50 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B5a S3-S4 7.50 6.00 7.70 7.90 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B5a S3-S4 7.50 6.00 7.80 7.30 0.00 0.0% 0.20 2.7%N.A. DT DB 3 Plate B5a S3-S4 7.50 6.00 8.00 7.80 0.00 0.0% 0.00 0.0%N.A. DT DB 3 Plate B5a S3-S4 7.50 6.00 7.70 - 0.00 0.0%N.A. DT DB 2 Plate B5a S3-S4 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate B5a S3-S4 7.50 6.00 8.00 7.90 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate B5b S3-S4 11.00 8.80 10.60 10.60 0.40 3.6% 0.40 3.6%N.A. DT DB 2 Plate B5b S3-S4 11.00 8.80 10.00 10.30 1.00 9.1% 0.70 6.4%N.A. DT DB 2 Plate B5b S3-S4 11.00 8.80 10.30 9.50 0.70 6.4% 1.50 13.6%N.A. DT DB 2 Plate B5b S3-S4 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%N.A. DT DB 2 Plate B5b S3-S4 11.00 8.80 10.50 - 0.50 4.5%N.A. DT DB 2 Plate B6 S5-S6 11.00 8.80 10.40 11.80 0.60 5.5% 0.00 0.0%N.A. DT DB 2 Plate B6 S5-S6 11.00 8.80 10.40 12.10 0.60 5.5% 0.00 0.0%N.A. DT DB 2 Plate B6 S5-S6 11.00 8.80 10.40 12.10 0.60 5.5% 0.00 0.0%N.A. DT DB 2 Plate B6 S5-S6 11.00 8.80 12.20 - 0.00 0.0%N.A. ER Plate C1 S1-S2 13.00 10.40 13.10 12.70 0.00 0.0% 0.30 2.3%N.A. ER Plate C1 S1-S2 13.00 10.40 12.90 12.70 0.10 0.8% 0.30 2.3%N.A. ER Plate C1 S1-S2 13.00 10.40 12.90 12.70 0.10 0.8% 0.30 2.3%N.A. ER Plate C2 S1-S2 7.50 6.00 7.60 7.60 0.00 0.0% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.60 7.50 0.00 0.0% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.50 10.30 0.00 0.0% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.40 10.30 0.10 1.3% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.90 10.30 0.00 0.0% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.30 7.50 0.20 2.7% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.40 7.60 0.10 1.3% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.20 7.60 0.30 4.0% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.20 7.50 0.30 4.0% 0.00 0.0%N.A. ER Plate C2 S1-S2 7.50 6.00 7.20 7.10 0.30 4.0% 0.40 5.3%N.A. ER Plate C2 S1-S2 7.50 6.00 7.20 - 0.30 4.0%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 7.80 7.80 0.20 2.5% 0.20 2.5%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 7.90 7.10 0.10 1.3% 0.90 11.3%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 7.80 8.00 0.20 2.5% 0.00 0.0%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 7.80 7.90 0.20 2.5% 0.10 1.3%
Operator's Signature: Bottom Page 14
![Page 22: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/22.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
External structure
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 7.70 7.80 0.30 3.8% 0.20 2.5%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 7.20 7.20 0.80 10.0% 0.80 10.0%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 8.00 7.80 0.00 0.0% 0.20 2.5%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 8.00 7.60 0.00 0.0% 0.40 5.0%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 8.00 7.90 0.00 0.0% 0.10 1.3%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 8.00 - 0.00 0.0%N.A. DT DB 4 Plate C3 S1-S2 8.00 6.40 8.40 - 0.00 0.0%N.A. DT DB 4 Plate C4 S3-S4 8.00 6.40 7.40 8.40 0.60 7.5% 0.00 0.0%N.A. DT DB 4 Plate C4 S3-S4 8.00 6.40 7.10 8.20 0.90 11.3% 0.00 0.0%N.A. DT DB 4 Plate C4 S3-S4 8.00 6.40 8.00 7.90 0.00 0.0% 0.10 1.3%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 7.40 8.50 0.60 7.5% 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 7.70 8.60 0.30 3.8% 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 7.80 8.40 0.20 2.5% 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 7.70 8.70 0.30 3.8% 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 7.80 8.30 0.20 2.5% 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 8.40 - 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 8.60 - 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 8.50 - 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 8.50 - 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 8.50 - 0.00 0.0%N.A. DT DB 3 Plate C4 S3-S4 8.00 6.40 8.30 - 0.00 0.0%N.A. DT DB 3 Plate C5 S3-S4 8.00 6.40 7.70 7.90 0.30 3.8% 0.10 1.3%N.A. DT DB 3 Plate C5 S3-S4 8.00 6.40 7.70 8.10 0.30 3.8% 0.00 0.0%N.A. DT DB 3 Plate C5 S3-S4 8.00 6.40 7.80 8.20 0.20 2.5% 0.00 0.0%N.A. DT DB 3 Plate C5 S3-S4 8.00 6.40 7.90 8.00 0.10 1.3% 0.00 0.0%N.A. DT DB 3 Plate C5 S3-S4 8.00 6.40 7.60 0.40 5.0% -N.A. DT DB 2 Plate C5 S3-S4 8.00 6.40 7.90 8.10 0.10 1.3% 0.00 0.0%N.A. DT DB 2 Plate C5 S3-S4 8.00 6.40 8.90 8.20 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate C5 S3-S4 8.00 6.40 7.90 7.10 0.10 1.3% 0.90 11.3%N.A. DT DB 2 Plate C5 S3-S4 8.00 6.40 8.30 8.00 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate C5 S3-S4 8.00 6.40 8.00 7.90 0.00 0.0% 0.10 1.3%N.A. DT DB 2 Plate C5 S3-S4 8.00 6.40 8.20 0.00 0.0% -N.A. DT DB 2 Plate C6 S5-S6 7.50 6.00 7.30 7.40 0.20 2.7% 0.10 1.3%N.A. DT DB 2 Plate C6 S5-S6 7.50 6.00 7.90 7.50 0.00 0.0% 0.00 0.0%N.A. DT DB 2 Plate C6 S5-S6 7.50 6.00 7.80 7.40 0.00 0.0% 0.10 1.3%N.A. DT DB 2 Plate C6 S5-S6 7.50 6.00 7.90 6.80 0.00 0.0% 0.70 9.3%N.A. DT DB 2 Plate C6 S5-S6 7.50 6.00 7.30 - 0.20 2.7%N.A. DT DB 2 Plate C6 S5-S6 7.50 6.00 7.50 - 0.00 0.0%N.A. DT DB 2 Plate C6 S5-S6 7.50 6.00 6.80 - 0.70 9.3%N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 7.90 8.70 0.00 0.0% 0.00 0.0%N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 7.80 8.20 0.00 0.0% 0.00 0.0%N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 8.00 7.30 0.00 0.0% 0.20 2.7%N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 8.00 7.10 0.00 0.0% 0.40 5.3%
Operator's Signature: Bottom Page 15
![Page 23: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/23.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
External structure
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 7.80 6.80 0.00 0.0% 0.70 9.3%N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 7.60 7.40 0.00 0.0% 0.10 1.3%N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 7.20 6.90 0.30 4.0% 0.60 8.0%N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 7.60 0.00 0.0% -N.A. DBT 1 Plate C6 S5-S6 7.50 6.00 7.70 0.00 0.0% -N.A. Bow THR Plate C7 S5-S6 7.50 6.00 7.40 8.00 0.10 1.3% 0.00 0.0%N.A. Bow THR Plate C7 S5-S6 7.50 6.00 7.40 7.80 0.10 1.3% 0.00 0.0%N.A. Bow THR Plate C7 S5-S6 7.50 6.00 7.70 0.00 0.0% -N.A. FPT Plate C7 S5-S6 7.50 6.00 7.70 7.90 0.00 0.0% 0.00 0.0%N.A. FPT Plate C7 S5-S6 7.50 6.00 7.60 7.70 0.00 0.0% 0.00 0.0%N.A. FPT Plate C7 S5-S6 7.50 6.00 7.30 8.20 0.20 2.7% 0.00 0.0%N.A. FPT Plate C8 S5-S6 11.00 8.80 9.60 10.20 1.40 12.7% 0.80 7.3%N.A. FPT Plate C8 S5-S6 11.00 8.80 10.20 10.20 0.80 7.3% 0.80 7.3%N.A. FPT Plate C8 S5-S6 11.00 8.80 10.30 10.10 0.70 6.4% 0.90 8.2%N.A. FPT Plate C8 S5-S6 11.00 8.80 10.10 0.90 8.2% -N.A. ER Plate HS1 S1-S2 18.50 14.80 18.90 18.40 0.00 0.0% 0.10 0.5%N.A. ER Plate HS1 S1-S2 18.50 14.80 18.90 18.70 0.00 0.0% 0.00 0.0%N.A. ER Plate HS2 S1-S2 18.50 14.80 19.00 0.00 0.0% -N.A. ER Plate HS2 S1-S2 18.50 14.80 19.00 0.00 0.0% -
Operator's Signature: Bottom Page 16
![Page 24: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/24.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
INNER BOTTOM PLATING - -- -
DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 7.80 11.00 3.20 29.1% 0.00 0.0% LocalDB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 8.70 10.90 2.30 20.9% 0.10 0.9% LocalDB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 7.80 11.00 3.20 29.1% 0.00 0.0% LocalDB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 9.60 1.40 12.7% -DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 8.70 2.30 20.9% - LocalDB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 9.10 1.90 17.3% - LocalDB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 9.60 1.40 12.7% -DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 11.00 0.00 0.0% -DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 11.00 0.00 0.0% -DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 11.20 0.00 0.0% -DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 10.90 0.10 0.9% -DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 11.00 0.00 0.0% -DB DT 4 CT Cargo hold Plate A1 S15 11.00 8.80 11.10 0.00 0.0% -
DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.10 9.90 0.90 8.2% 1.10 10.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.40 10.00 0.60 5.5% 1.00 9.1%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.30 10.50 0.70 6.4% 0.50 4.5%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.00 10.70 1.00 9.1% 0.30 2.7%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 12.50 10.30 0.00 0.0% 0.70 6.4%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.10 10.70 0.90 8.2% 0.30 2.7%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.20 10.80 0.80 7.3% 0.20 1.8%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.10 10.80 0.90 8.2% 0.20 1.8%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.10 11.10 0.90 8.2% 0.00 0.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 12.50 11.00 0.00 0.0% 0.00 0.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.90 11.00 0.10 0.9% 0.00 0.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 11.00 10.30 0.00 0.0% 0.70 6.4%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.80 11.00 0.20 1.8% 0.00 0.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.50 11.00 0.50 4.5% 0.00 0.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 12.60 10.90 0.00 0.0% 0.10 0.9%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.80 11.00 0.20 1.8% 0.00 0.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.80 11.00 0.20 1.8% 0.00 0.0%DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.90 0.10 0.9% -DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 11.00 0.00 0.0% -DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 9.90 1.10 10.0% -DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 9.50 1.50 13.6% -DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.00 1.00 9.1% -DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 11.00 0.00 0.0% -DB DT 4 Cargo hold Plate A1 S15 11.00 8.80 10.20 0.80 7.3% -
DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 12.90 9.80 0.00 0.0% 1.20 10.9%DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 10.40 10.00 0.60 5.5% 1.00 9.1%DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 9.60 10.10 1.40 12.7% 0.90 8.2%DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 9.60 10.10 1.40 12.7% 0.90 8.2%DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 12.90 10.70 0.00 0.0% 0.30 2.7%
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
Operator's Signature: Inner bottom Page 17
![Page 25: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/25.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 9.60 10.50 1.40 12.7% 0.50 4.5%DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 9.10 10.60 1.90 17.3% 0.40 3.6% LocalDB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 9.60 10.50 1.40 12.7% 0.50 4.5%DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 12.90 10.70 0.00 0.0% 0.30 2.7%DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 10.70 0.30 2.7% -DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 10.00 1.00 9.1% -DB DT 4 CT Cargo hold Plate A2 S15 11.00 8.80 9.60 1.40 12.7% -
DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.10 10.20 0.90 8.2% 0.80 7.3%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 9.70 10.50 1.30 11.8% 0.50 4.5%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.10 10.30 0.90 8.2% 0.70 6.4%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.10 10.10 0.90 8.2% 0.90 8.2%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 12.50 10.50 0.00 0.0% 0.50 4.5%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.30 10.50 0.70 6.4% 0.50 4.5%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.20 10.50 0.80 7.3% 0.50 4.5%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.40 10.60 0.60 5.5% 0.40 3.6%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 12.60 10.50 0.00 0.0% 0.50 4.5%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.20 10.30 0.80 7.3% 0.70 6.4%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.50 10.50 0.50 4.5% 0.50 4.5%DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.10 0.90 8.2% -DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 10.50 0.50 4.5% -DB DT 4 Cargo hold Plate A2 S15 11.00 8.80 12.70 0.00 0.0% -
DB DT 4 CT Cargo hold Plate A3 S15 11.00 8.80 9.80 10.20 1.20 10.9% 0.80 7.3%DB DT 4 CT Cargo hold Plate A3 S15 11.00 8.80 10.20 9.90 0.80 7.3% 1.10 10.0%DB DT 4 CT Cargo hold Plate A3 S15 11.00 8.80 10.50 10.00 0.50 4.5% 1.00 9.1%DB DT 4 CT Cargo hold Plate A3 S15 11.00 8.80 10.10 10.30 0.90 8.2% 0.70 6.4%DB DT 4 CT Cargo hold Plate A3 S15 11.00 8.80 10.80 10.00 0.20 1.8% 1.00 9.1%DB DT 4 CT Cargo hold Plate A3 S15 11.00 8.80 10.60 10.50 0.40 3.6% 0.50 4.5%
DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.10 10.70 0.90 8.2% 0.30 2.7%DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.30 10.50 0.70 6.4% 0.50 4.5%DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.10 10.50 0.90 8.2% 0.50 4.5%DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.10 10.80 0.90 8.2% 0.20 1.8%DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.40 10.70 0.60 5.5% 0.30 2.7%DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.40 10.60 0.60 5.5% 0.40 3.6%DB DT 4 Cargo hold Plate A3 S15 11.00 8.80 10.50 10.60 0.50 4.5% 0.40 3.6%
DB DT 4 CT Cargo hold Plate A4 S15 11.00 8.80 11.10 11.10 0.00 0.0% 0.00 0.0%DB DT 4 CT Cargo hold Plate A4 S15 11.00 8.80 11.20 11.10 0.00 0.0% 0.00 0.0%DB DT 4 CT Cargo hold Plate A4 S15 11.00 8.80 11.10 11.00 0.00 0.0% 0.00 0.0%
DB DT 4 Cargo hold Plate A4 S15 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%DB DT 4 Cargo hold Plate A4 S15 11.00 8.80 10.90 11.00 0.10 0.9% 0.00 0.0%DB DT 4 Cargo hold Plate A4 S15 11.00 8.80 10.80 11.00 0.20 1.8% 0.00 0.0%DB DT 4 Cargo hold Plate A4 S15 11.00 8.80 10.80 11.00 0.20 1.8% 0.00 0.0%
Operator's Signature: Inner bottom Page 18
![Page 26: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/26.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 4 CT Cargo hold Plate A5 S15 11.00 8.80 11.10 11.00 0.00 0.0% 0.00 0.0%DB DT 4 CT Cargo hold Plate A5 S15 11.00 8.80 11.10 11.10 0.00 0.0% 0.00 0.0%DB DT 4 CT Cargo hold Plate A5 S15 11.00 8.80 11.00 - 0.00 0.0%
DB DT 4 Cargo hold Plate A5 S15 11.00 8.80 10.90 10.80 0.10 0.9% 0.20 1.8%DB DT 4 Cargo hold Plate A5 S15 11.00 8.80 10.80 11.00 0.20 1.8% 0.00 0.0%DB DT 4 Cargo hold Plate A5 S15 11.00 8.80 10.90 11.00 0.10 0.9% 0.00 0.0%DB DT 4 Cargo hold Plate A5 S15 11.00 8.80 11.00 11.00 0.00 0.0% 0.00 0.0%
DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 12.90 9.70 0.00 0.0% 1.30 11.8%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 9.70 10.10 1.30 11.8% 0.90 8.2%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 8.20 10.50 2.80 25.5% 0.50 4.5% LocalDB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 9.60 12.80 1.40 12.7% 0.00 0.0%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 12.90 9.60 0.00 0.0% 1.40 12.7%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 9.60 9.90 1.40 12.7% 1.10 10.0%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 9.60 10.30 1.40 12.7% 0.70 6.4%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 12.90 12.80 0.00 0.0% 0.00 0.0%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 8.10 8.70 2.90 26.4% 2.30 20.9% LocalDB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 9.20 9.60 1.80 16.4% 1.40 12.7% LocalDB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 9.80 10.10 1.20 10.9% 0.90 8.2%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 12.90 12.90 0.00 0.0% 0.00 0.0%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 10.50 8.70 0.50 4.5% 2.30 20.9% LocalDB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 10.20 12.10 0.80 7.3% 0.00 0.0%DB DT 4 CT Cargo hold Plate A6 S15 11.00 8.80 12.70 12.90 0.00 0.0% 0.00 0.0%
DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.20 12.80 0.80 7.3% 0.00 0.0%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.00 10.10 1.00 9.1% 0.90 8.2%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.30 10.40 0.70 6.4% 0.60 5.5%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.20 10.20 0.80 7.3% 0.80 7.3%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 12.90 9.40 0.00 0.0% 1.60 14.5%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.10 12.80 0.90 8.2% 0.00 0.0%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.30 10.10 0.70 6.4% 0.90 8.2%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.50 10.20 0.50 4.5% 0.80 7.3%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 12.80 10.40 0.00 0.0% 0.60 5.5%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.30 12.90 0.70 6.4% 0.00 0.0%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.40 10.20 0.60 5.5% 0.80 7.3%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.00 10.40 1.00 9.1% 0.60 5.5%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 12.90 10.10 0.00 0.0% 0.90 8.2%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.10 12.90 0.90 8.2% 0.00 0.0%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.40 10.60 0.60 5.5% 0.40 3.6%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 10.10 10.40 0.90 8.2% 0.60 5.5%DB DT 4 Cargo hold Plate A6 S15 11.00 8.80 12.80 9.90 0.00 0.0% 1.10 10.0%
DB DT 4 CT Cargo hold Plate A7 S15 11.00 8.80 12.90 8.70 0.00 0.0% 2.30 20.9% Local
Operator's Signature: Inner bottom Page 19
![Page 27: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/27.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 4 CT Cargo hold Plate A7 S15 11.00 8.80 9.60 9.60 1.40 12.7% 1.40 12.7%DB DT 4 CT Cargo hold Plate A7 S15 11.00 8.80 10.50 11.90 0.50 4.5% 0.00 0.0%DB DT 4 CT Cargo hold Plate A7 S15 11.00 8.80 9.60 12.90 1.40 12.7% 0.00 0.0%DB DT 4 CT Cargo hold Plate A7 S15 11.00 8.80 10.10 - 0.90 8.2%DB DT 4 CT Cargo hold Plate A7 S15 11.00 8.80 12.90 - 0.00 0.0%
DB DT 4 Cargo hold Plate A7 S15 11.00 8.80 10.40 12.90 0.60 5.5% 0.00 0.0%DB DT 4 Cargo hold Plate A7 S15 11.00 8.80 10.00 9.90 1.00 9.1% 1.10 10.0%DB DT 4 Cargo hold Plate A7 S15 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 4 Cargo hold Plate A7 S15 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 4 Cargo hold Plate A7 S15 11.00 8.80 12.10 10.50 0.00 0.0% 0.50 4.5%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.70 10.80 0.30 2.7% 0.20 1.8%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.70 10.80 0.30 2.7% 0.20 1.8%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.70 9.60 0.30 2.7% 1.40 12.7%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.50 10.50 0.50 4.5% 0.50 4.5%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.60 10.40 0.40 3.6% 0.60 5.5%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.70 10.50 0.30 2.7% 0.50 4.5%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.80 9.90 0.20 1.8% 1.10 10.0%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.70 10.10 0.30 2.7% 0.90 8.2%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.50 10.60 0.50 4.5% 0.40 3.6%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.30 10.10 0.70 6.4% 0.90 8.2%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.30 10.20 0.70 6.4% 0.80 7.3%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.30 10.40 0.70 6.4% 0.60 5.5%DB DT 3 Cargo hold Plate A7 S15 11.00 8.80 10.10 10.50 0.90 8.2% 0.50 4.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 9.80 10.70 1.20 10.9% 0.30 2.7%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.40 10.70 0.60 5.5% 0.30 2.7%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.30 10.60 0.70 6.4% 0.40 3.6%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.50 10.50 0.50 4.5% 0.50 4.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 9.90 10.50 1.10 10.0% 0.50 4.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 9.60 10.70 1.40 12.7% 0.30 2.7%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 9.70 10.40 1.30 11.8% 0.60 5.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.60 10.00 0.40 3.6% 1.00 9.1%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.50 10.70 0.50 4.5% 0.30 2.7%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.50 9.80 0.50 4.5% 1.20 10.9%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.20 10.60 0.80 7.3% 0.40 3.6%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.70 10.60 0.30 2.7% 0.40 3.6%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.60 10.10 0.40 3.6% 0.90 8.2%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.70 10.50 0.30 2.7% 0.50 4.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.50 10.70 0.50 4.5% 0.30 2.7%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.30 10.60 0.70 6.4% 0.40 3.6%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.60 10.40 0.40 3.6% 0.60 5.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.20 10.50 0.80 7.3% 0.50 4.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.50 10.50 0.50 4.5% 0.50 4.5%
Operator's Signature: Inner bottom Page 20
![Page 28: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/28.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 3 Cargo hold Plate A8 S15 11.00 8.80 10.70 10.50 0.30 2.7% 0.50 4.5%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.70 10.60 0.30 2.7% 0.40 3.6%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 9.80 10.50 1.20 10.9% 0.50 4.5%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.10 10.10 0.90 8.2% 0.90 8.2%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.30 10.80 0.70 6.4% 0.20 1.8%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.50 10.60 0.50 4.5% 0.40 3.6%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.40 10.70 0.60 5.5% 0.30 2.7%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.40 10.50 0.60 5.5% 0.50 4.5%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.20 10.70 0.80 7.3% 0.30 2.7%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.30 10.10 0.70 6.4% 0.90 8.2%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.00 10.50 1.00 9.1% 0.50 4.5%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.40 10.00 0.60 5.5% 1.00 9.1%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 9.70 9.60 1.30 11.8% 1.40 12.7%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.70 9.80 0.30 2.7% 1.20 10.9%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.30 10.10 0.70 6.4% 0.90 8.2%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.00 10.20 1.00 9.1% 0.80 7.3%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.10 9.60 0.90 8.2% 1.40 12.7%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.20 10.30 0.80 7.3% 0.70 6.4%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 9.60 9.60 1.40 12.7% 1.40 12.7%DB DT 3 Cargo hold Plate A9 S15 11.00 8.80 10.20 10.80 0.80 7.3% 0.20 1.8%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.90 10.10 0.10 0.9% 0.90 8.2%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.10 10.60 0.90 8.2% 0.40 3.6%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.60 10.50 0.40 3.6% 0.50 4.5%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.80 10.60 0.20 1.8% 0.40 3.6%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.70 10.60 0.30 2.7% 0.40 3.6%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.60 10.90 0.40 3.6% 0.10 0.9%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.70 10.80 0.30 2.7% 0.20 1.8%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.50 10.90 0.50 4.5% 0.10 0.9%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.70 10.50 0.30 2.7% 0.50 4.5%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.90 10.80 0.10 0.9% 0.20 1.8%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 9.80 10.80 1.20 10.9% 0.20 1.8%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 9.90 10.60 1.10 10.0% 0.40 3.6%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.90 10.60 0.10 0.9% 0.40 3.6%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.80 10.90 0.20 1.8% 0.10 0.9%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.30 10.70 0.70 6.4% 0.30 2.7%DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.70 11.00 0.30 2.7% 0.00 0.0%
Operator's Signature: Inner bottom Page 21
![Page 29: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/29.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 3 Cargo hold Plate A10 S16 11.00 8.80 10.70 10.90 0.30 2.7% 0.10 0.9%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.40 9.60 0.60 5.5% 1.40 12.7%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.20 10.10 0.80 7.3% 0.90 8.2%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.10 10.20 0.90 8.2% 0.80 7.3%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.10 10.70 0.90 8.2% 0.30 2.7%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.20 10.10 0.80 7.3% 0.90 8.2%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.40 10.60 0.60 5.5% 0.40 3.6%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.20 10.30 0.80 7.3% 0.70 6.4%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.20 10.00 0.80 7.3% 1.00 9.1%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.10 10.30 0.90 8.2% 0.70 6.4%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.10 10.20 0.90 8.2% 0.80 7.3%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.10 10.10 0.90 8.2% 0.90 8.2%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.20 10.10 0.80 7.3% 0.90 8.2%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.40 9.70 0.60 5.5% 1.30 11.8%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.40 10.50 0.60 5.5% 0.50 4.5%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.50 10.50 0.50 4.5% 0.50 4.5%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.30 9.90 0.70 6.4% 1.10 10.0%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.20 10.20 0.80 7.3% 0.80 7.3%DB DT 3 Cargo hold Plate A11 S16 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.40 10.20 0.60 5.5% 0.80 7.3%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.20 9.50 0.80 7.3% 1.50 13.6%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.40 10.00 0.60 5.5% 1.00 9.1%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.60 10.30 0.40 3.6% 0.70 6.4%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.60 10.20 0.40 3.6% 0.80 7.3%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.50 10.10 0.50 4.5% 0.90 8.2%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.60 - 0.40 3.6%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.40 - 0.60 5.5%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.40 - 0.60 5.5%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.20 - 0.80 7.3%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.50 - 0.50 4.5%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 9.60 - 1.40 12.7%DB DT 3 Cargo hold Plate A12 S16 11.00 8.80 10.20 - 0.80 7.3%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.20 10.10 0.80 7.3% 0.90 8.2%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 9.90 10.20 1.10 10.0% 0.80 7.3%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 9.70 10.50 1.30 11.8% 0.50 4.5%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.20 10.50 0.80 7.3% 0.50 4.5%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.30 10.40 0.70 6.4% 0.60 5.5%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.00 9.90 1.00 9.1% 1.10 10.0%
Operator's Signature: Inner bottom Page 22
![Page 30: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/30.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.40 10.60 0.60 5.5% 0.40 3.6%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.20 10.40 0.80 7.3% 0.60 5.5%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 9.80 10.40 1.20 10.9% 0.60 5.5%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 9.60 10.20 1.40 12.7% 0.80 7.3%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 9.90 10.60 1.10 10.0% 0.40 3.6%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.00 10.60 1.00 9.1% 0.40 3.6%DB DT 2 Cargo hold Plate A12 S16 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.40 10.20 0.60 5.5% 0.80 7.3%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.50 10.00 0.50 4.5% 1.00 9.1%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.20 10.10 0.80 7.3% 0.90 8.2%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.10 10.30 0.90 8.2% 0.70 6.4%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.30 10.40 0.70 6.4% 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.20 10.30 0.80 7.3% 0.70 6.4%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.20 10.20 0.80 7.3% 0.80 7.3%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.40 10.20 0.60 5.5% 0.80 7.3%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.30 10.20 0.70 6.4% 0.80 7.3%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.50 10.20 0.50 4.5% 0.80 7.3%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.10 10.40 0.90 8.2% 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.00 10.30 1.00 9.1% 0.70 6.4%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.20 10.00 0.80 7.3% 1.00 9.1%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.20 10.00 0.80 7.3% 1.00 9.1%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.00 10.40 1.00 9.1% 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.20 10.40 0.80 7.3% 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.00 10.30 1.00 9.1% 0.70 6.4%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.10 10.50 0.90 8.2% 0.50 4.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.30 10.30 0.70 6.4% 0.70 6.4%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.10 - 0.90 8.2%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 9.80 - 1.20 10.9%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.40 - 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.40 - 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.40 - 0.60 5.5%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.70 - 0.30 2.7%DB DT 2 Cargo hold Plate A13 S16 11.00 8.80 10.50 - 0.50 4.5%DB DT 2 Cargo hold Plate A14 S16 11.00 8.80 10.30 10.10 0.70 6.4% 0.90 8.2%DB DT 2 Cargo hold Plate A14 S16 11.00 8.80 10.20 10.30 0.80 7.3% 0.70 6.4%DB DT 2 Cargo hold Plate A14 S16 11.00 8.80 10.00 10.20 1.00 9.1% 0.80 7.3%DB DT 2 Cargo hold Plate A14 S16 11.00 8.80 9.90 10.70 1.10 10.0% 0.30 2.7%DB DT 2 Cargo hold Plate A14 S16 11.00 8.80 10.10 10.60 0.90 8.2% 0.40 3.6%DB DT 2 Cargo hold Plate A14 S16 11.00 8.80 10.00 10.80 1.00 9.1% 0.20 1.8%DB DT 2 Cargo hold Plate A14 S16 11.00 8.80 10.10 10.70 0.90 8.2% 0.30 2.7%DB DT 2 Cargo hold Plate A15 S16 11.00 8.80 11.10 11.00 0.00 0.0% 0.00 0.0%
Operator's Signature: Inner bottom Page 23
![Page 31: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/31.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 2 Cargo hold Plate A15 S16 11.00 8.80 11.20 11.20 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A15 S16 11.00 8.80 11.10 11.10 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A15 S16 11.00 8.80 11.20 11.10 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A15 S16 11.00 8.80 11.10 11.00 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A15 S16 11.00 8.80 11.20 11.20 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A15 S16 11.00 8.80 11.10 - 0.00 0.0%DB DT 2 Cargo hold Plate A16 S16 11.00 8.80 11.30 11.10 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A16 S16 11.00 8.80 11.20 11.30 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A16 S16 11.00 8.80 11.10 11.10 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A16 S16 11.00 8.80 11.20 11.20 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A16 S16 11.00 8.80 11.20 11.10 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A16 S16 11.00 8.80 11.10 11.30 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A16 S16 11.00 8.80 11.10 11.10 0.00 0.0% 0.00 0.0%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 10.00 9.40 1.00 9.1% 1.60 14.5%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.10 10.10 1.90 17.3% 0.90 8.2% LocalDB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.00 10.50 2.00 18.2% 0.50 4.5% LocalDB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.00 10.20 2.00 18.2% 0.80 7.3% LocalDB DT 2 Cargo hold Plate A17 S16 11.00 8.80 8.20 10.30 2.80 25.5% 0.70 6.4% LocalDB DT 2 Cargo hold Plate A17 S16 11.00 8.80 10.10 10.10 0.90 8.2% 0.90 8.2%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.50 10.10 1.50 13.6% 0.90 8.2%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.50 10.50 1.50 13.6% 0.50 4.5%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.00 10.70 2.00 18.2% 0.30 2.7% LocalDB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.60 10.50 1.40 12.7% 0.50 4.5%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.70 10.20 1.30 11.8% 0.80 7.3%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.50 10.40 1.50 13.6% 0.60 5.5%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.60 10.50 1.40 12.7% 0.50 4.5%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.70 9.70 1.30 11.8% 1.30 11.8%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 10.30 10.10 0.70 6.4% 0.90 8.2%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.20 9.60 1.80 16.4% 1.40 12.7% LocalDB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.50 9.90 1.50 13.6% 1.10 10.0%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.70 9.40 1.30 11.8% 1.60 14.5%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.60 9.60 1.40 12.7% 1.40 12.7%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.50 9.70 1.50 13.6% 1.30 11.8%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.50 10.40 1.50 13.6% 0.60 5.5%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 9.70 10.00 1.30 11.8% 1.00 9.1%DB DT 2 Cargo hold Plate A17 S16 11.00 8.80 8.60 10.20 2.40 21.8% 0.80 7.3% LocalDB DT 2 Cargo hold Plate A17a S16 11.00 8.80 9.50 10.20 1.50 13.6% 0.80 7.3%DB DT 2 Cargo hold Plate A17a S16 11.00 8.80 10.00 10.00 1.00 9.1% 1.00 9.1%DB DT 2 Cargo hold Plate A17a S16 11.00 8.80 10.20 10.30 0.80 7.3% 0.70 6.4%DB DT 2 Cargo hold Plate A17a S16 11.00 8.80 10.00 8.70 1.00 9.1% 2.30 20.9% LocalDB DT 2 Cargo hold Plate A17a S16 11.00 8.80 10.40 10.30 0.60 5.5% 0.70 6.4%DB DT 2 Cargo hold Plate A17a S16 11.00 8.80 7.80 10.40 3.20 29.1% 0.60 5.5% LocalDB DT 2 Cargo hold Plate A18 S16 11.00 8.80 9.40 9.90 1.60 14.5% 1.10 10.0%
Operator's Signature: Inner bottom Page 24
![Page 32: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/32.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 9.50 9.90 1.50 13.6% 1.10 10.0%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 9.70 9.90 1.30 11.8% 1.10 10.0%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 9.20 9.90 1.80 16.4% 1.10 10.0% LocalDB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.00 9.60 1.00 9.1% 1.40 12.7%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.00 10.00 1.00 9.1% 1.00 9.1%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 9.90 10.00 1.10 10.0% 1.00 9.1%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 9.10 9.90 1.90 17.3% 1.10 10.0% LocalDB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.00 10.40 1.00 9.1% 0.60 5.5%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 8.10 9.50 2.90 26.4% 1.50 13.6% LocalDB DT 2 Cargo hold Plate A18 S16 11.00 8.80 8.70 10.00 2.30 20.9% 1.00 9.1% LocalDB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.00 10.40 1.00 9.1% 0.60 5.5%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 9.90 10.10 1.10 10.0% 0.90 8.2%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.20 10.20 0.80 7.3% 0.80 7.3%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.10 9.60 0.90 8.2% 1.40 12.7%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 7.00 9.70 4.00 36.4% 1.30 11.8% LocalDB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.10 10.20 0.90 8.2% 0.80 7.3%DB DT 2 Cargo hold Plate A18 S16 11.00 8.80 10.20 0.80 7.3% -DBT 1 Cargo hold Plate A18 S16 11.00 8.80 9.00 9.80 2.00 18.2% 1.20 10.9% LocalDBT 1 Cargo hold Plate A18 S16 11.00 8.80 10.10 9.60 0.90 8.2% 1.40 12.7%DBT 1 Cargo hold Plate A18 S16 11.00 8.80 9.50 9.90 1.50 13.6% 1.10 10.0%DBT 1 Cargo hold Plate A18 S16 11.00 8.80 9.50 10.10 1.50 13.6% 0.90 8.2%DBT 1 Cargo hold Plate A18 S16 11.00 8.80 9.50 10.20 1.50 13.6% 0.80 7.3%DBT 1 Void space Plate A19 S16 11.00 8.80 9.50 10.50 1.50 13.6% 0.50 4.5%DBT 1 Void space Plate A19 S16 11.00 8.80 10.60 10.00 0.40 3.6% 1.00 9.1%DBT 1 Void space Plate A19 S16 11.00 8.80 10.00 10.80 1.00 9.1% 0.20 1.8%DBT 1 Void space Plate A19 S16 11.00 8.80 10.00 10.20 1.00 9.1% 0.80 7.3%DBT 1 Void space Plate A19 S16 11.00 8.80 10.60 10.70 0.40 3.6% 0.30 2.7%DBT 1 Void space Plate A19 S16 11.00 8.80 9.60 9.80 1.40 12.7% 1.20 10.9%DBT 1 Void space Plate A19 S16 11.00 8.80 9.80 10.10 1.20 10.9% 0.90 8.2%DBT 1 Void space Plate A19 S16 11.00 8.80 10.00 10.60 1.00 9.1% 0.40 3.6%DBT 1 Void space Plate A19 S16 11.00 8.80 9.50 10.00 1.50 13.6% 1.00 9.1%DBT 1 Void space Plate A19 S16 11.00 8.80 9.90 11.00 1.10 10.0% 0.00 0.0%DBT 1 Void space Plate A19 S16 11.00 8.80 10.00 10.30 1.00 9.1% 0.70 6.4%DBT 1 Void space Plate A19 S16 11.00 8.80 9.80 10.10 1.20 10.9% 0.90 8.2%DBT 1 Void space Plate A19 S16 11.00 8.80 9.70 10.50 1.30 11.8% 0.50 4.5%DBT 1 Void space Plate A19 S16 11.00 8.80 9.80 10.20 1.20 10.9% 0.80 7.3%DBT 1 Void space Plate A19 S16 11.00 8.80 9.90 10.10 1.10 10.0% 0.90 8.2%DBT 1 Void space Plate A19 S16 11.00 8.80 9.60 - 1.40 12.7%DBT 1 Void space Plate A19 S16 11.00 8.80 10.20 - 0.80 7.3%DBT 1 Void space Plate A20 S16 9.00 7.20 8.60 9.20 0.40 4.4% 0.00 0.0%DBT 1 Void space Plate A20 S16 9.00 7.20 8.70 9.20 0.30 3.3% 0.00 0.0%DBT 1 Void space Plate A20 S16 9.00 7.20 9.00 9.00 0.00 0.0% 0.00 0.0%
DB DT 3 Side tank Plate B S15 7.00 5.60 6.30 5.90 0.70 10.0% 1.10 15.7% Local
Operator's Signature: Inner bottom Page 25
![Page 33: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/33.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DB DT 3 Side tank Plate B S15 7.00 5.60 6.40 6.00 0.60 8.6% 1.00 14.3%DB DT 3 Side tank Plate B S15 7.00 5.60 6.20 6.30 0.80 11.4% 0.70 10.0%DB DT 3 Side tank Plate B S15 7.00 5.60 6.30 6.00 0.70 10.0% 1.00 14.3%DB DT 3 Side tank Plate B S15 7.00 5.60 6.30 6.20 0.70 10.0% 0.80 11.4%DB DT 3 Side tank Plate B S15 7.00 5.60 6.40 6.30 0.60 8.6% 0.70 10.0%DB DT 3 Side tank Plate B S15 7.00 5.60 6.50 6.20 0.50 7.1% 0.80 11.4%DB DT 3 Side tank Plate B S15 7.00 5.60 6.60 6.20 0.40 5.7% 0.80 11.4%DB DT 3 Side tank Plate B S15 7.00 5.60 6.70 6.50 0.30 4.3% 0.50 7.1%DB DT 3 Side tank Plate B S16 7.00 5.60 6.60 6.50 0.40 5.7% 0.50 7.1%DB DT 3 Side tank Plate B S16 7.00 5.60 6.60 6.30 0.40 5.7% 0.70 10.0%DB DT 3 Side tank Plate B S16 7.00 5.60 6.70 6.30 0.30 4.3% 0.70 10.0%DB DT 3 Side tank Plate B S16 7.00 5.60 6.30 6.00 0.70 10.0% 1.00 14.3%DB DT 3 Side tank Plate B S16 7.00 5.60 6.30 6.40 0.70 10.0% 0.60 8.6%DB DT 3 Side tank Plate B S16 7.00 5.60 6.60 6.80 0.40 5.7% 0.20 2.9%DB DT 3 Side tank Plate B S16 7.00 5.60 6.60 6.90 0.40 5.7% 0.10 1.4%
Operator's Signature: Inner bottom Page 26
![Page 34: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/34.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
FR.18-22 - -- -
DT BT 4 CT Fuel tank Plate S15 Fr.18-22 8.00 6.40 7.80 - 0.20 2.5%DT BT 4 CT Fuel tank Plate S15 Fr.18-22 8.00 6.40 7.70 - 0.30 3.8%
- -CHAIN LOCKER FR.78-80 - -
- -N.A. N.A. Plate S14 A 8.00 6.40 7.10 7.00 0.90 11.3% 1.00 12.5%N.A. N.A. Plate S14 A 8.00 6.40 7.40 7.50 0.60 7.5% 0.50 6.3%N.A. N.A. Plate S14 A 8.00 6.40 7.50 7.20 0.50 6.3% 0.80 10.0%N.A. N.A. Plate S14 A 8.00 6.40 8.00 7.00 0.00 0.0% 1.00 12.5%N.A. N.A. Plate S14 A 8.00 6.40 7.70 7.00 0.30 3.8% 1.00 12.5%N.A. N.A. Plate S14 A 8.00 6.40 8.00 7.30 0.00 0.0% 0.70 8.8%N.A. N.A. Plate S14 A 8.00 6.40 5.80 6.10 2.20 27.5% 1.90 23.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.00 5.30 2.00 25.0% 2.70 33.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.50 4.90 1.50 18.8% 3.10 38.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.00 6.30 2.00 25.0% 1.70 21.3% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.30 5.10 1.70 21.3% 2.90 36.3% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 5.40 4.90 2.60 32.5% 3.10 38.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.00 5.30 2.00 25.0% 2.70 33.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 5.80 4.60 2.20 27.5% 3.40 42.5% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.50 4.80 1.50 18.8% 3.20 40.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 7.10 7.00 0.90 11.3% 1.00 12.5%N.A. N.A. Plate S14 A 8.00 6.40 7.20 7.30 0.80 10.0% 0.70 8.8%N.A. N.A. Plate S14 A 8.00 6.40 7.70 6.30 0.30 3.8% 1.70 21.3% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 7.00 7.00 1.00 12.5% 1.00 12.5%N.A. N.A. Plate S14 A 8.00 6.40 7.50 6.90 0.50 6.3% 1.10 13.8%N.A. N.A. Plate S14 A 8.00 6.40 7.10 7.40 0.90 11.3% 0.60 7.5%N.A. N.A. Plate S14 A 8.00 6.40 5.90 5.70 2.10 26.3% 2.30 28.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 5.50 4.80 2.50 31.3% 3.20 40.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 5.70 5.80 2.30 28.8% 2.20 27.5% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.10 4.80 1.90 23.8% 3.20 40.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.00 5.50 2.00 25.0% 2.50 31.3% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.60 5.30 1.40 17.5% 2.70 33.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.40 5.20 1.60 20.0% 2.80 35.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.60 5.70 1.40 17.5% 2.30 28.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.70 6.70 1.30 16.3% 1.30 16.3% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 5.70 4.80 2.30 28.8% 3.20 40.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.30 5.00 1.70 21.3% 3.00 37.5% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.20 6.70 1.80 22.5% 1.30 16.3% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.20 7.30 1.80 22.5% 0.70 8.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 7.20 7.40 0.80 10.0% 0.60 7.5%N.A. N.A. Plate S14 A 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.20 7.50 0.00 0.0% 0.50 6.3%
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
Operator's Signature: Long bhd Page 27
![Page 35: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/35.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
N.A. N.A. Plate S14 A 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.10 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 6.30 8.10 1.70 21.3% 0.00 0.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 6.90 8.10 1.10 13.8% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.00 8.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 7.20 8.00 0.80 10.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 7.20 5.80 0.80 10.0% 2.20 27.5% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 8.10 5.10 0.00 0.0% 2.90 36.3% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 8.00 6.00 0.00 0.0% 2.00 25.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 8.00 6.40 0.00 0.0% 1.60 20.0% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 8.00 6.10 0.00 0.0% 1.90 23.8% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 7.90 6.20 0.10 1.3% 1.80 22.5% To be renewedN.A. N.A. Plate S14 A 8.00 6.40 8.10 7.70 0.00 0.0% 0.30 3.8%N.A. N.A. Plate S14 A 8.00 6.40 8.10 7.20 0.00 0.0% 0.80 10.0%N.A. N.A. Plate S14 A 8.00 6.40 8.10 7.10 0.00 0.0% 0.90 11.3%N.A. N.A. Plate S14 A 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.20 8.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 A 8.00 6.40 8.20 0.00 0.0% -N.A. N.A. Plate S14 A 8.00 6.40 8.00 0.00 0.0% -N.A. N.A. Plate S14 A 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate S14 A 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate S14 A 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate S14 B 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate S14 B 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener S14 Lower, fr.79 7.00 5.25 7.30 7.40 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener S14 Mid, fr.79 7.00 5.25 7.40 7.30 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener S14 Upper, fr.79 8.00 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%
Operator's Signature: Long bhd Page 28
![Page 36: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/36.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
FR.22 - -- -
DT BT 4 CT Fuel tank Plate Fr.22 S15 6.50 5.20 6.80 - 0.00 0.0%DT BT 4 CT Fuel tank Plate Fr.22 S15 6.50 5.20 6.90 - 0.00 0.0%DT BT 4 CT Fuel tank Plate Fr.22 S15 6.50 5.20 6.90 - 0.00 0.0%
- -FR.3 - -
- -FWT ER Plate A S17 8.00 6.40 8.20 8.10 0.00 0.0% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 8.20 8.10 0.00 0.0% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 7.90 8.00 0.10 1.3% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 8.40 8.20 0.00 0.0% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 8.20 8.20 0.00 0.0% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 8.00 8.30 0.00 0.0% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 7.60 8.30 0.40 5.0% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 8.20 8.10 0.00 0.0% 0.00 0.0%FWT ER Plate A S17 8.00 6.40 8.00 - 0.00 0.0%FWT FWT CL BHD CLB1 S17 8.00 6.40 7.80 0.20 2.5% -FWT FWT CL BHD CLB2 S17 12.00 9.60 12.30 0.00 0.0% -FWT N.A. Side girder GRD S17 8.00 6.40 8.40 8.00 0.00 0.0% 0.00 0.0%FWT N.A. Side girder GRD S17 8.00 6.40 8.30 0.00 0.0% -FWT ER Tank top Tanktop S17 7.00 5.60 6.80 0.20 2.9% -FWT ER Tank top Tanktop S17 7.00 5.60 6.90 0.10 1.4% -
- -FR.7 - -
- -FWT ER Plate A S17 7.00 5.60 6.80 6.90 0.20 2.9% 0.10 1.4%FWT ER Plate A S17 7.00 5.60 6.90 7.00 0.10 1.4% 0.00 0.0%FWT ER Plate A S17 7.00 5.60 6.90 7.00 0.10 1.4% 0.00 0.0%FWT ER Plate A S17 7.00 5.60 7.00 6.80 0.00 0.0% 0.20 2.9%FWT ER Plate A S17 7.00 5.60 6.80 7.00 0.20 2.9% 0.00 0.0%FWT ER Plate A S17 7.00 5.60 6.90 7.10 0.10 1.4% 0.00 0.0%FWT ER Plate A S17 7.00 5.60 7.00 6.80 0.00 0.0% 0.20 2.9%FWT ER Plate A S17 7.00 5.60 6.80 7.20 0.20 2.9% 0.00 0.0%FWT ER Plate A S17 7.00 5.60 6.50 7.00 0.50 7.1% 0.00 0.0%FWT ER Plate A S17 7.00 5.60 7.00 6.90 0.00 0.0% 0.10 1.4%FWT ER Plate A S17 7.00 5.60 6.70 7.00 0.30 4.3% 0.00 0.0%FWT ER Plate A S17 7.00 5.60 6.70 6.90 0.30 4.3% 0.10 1.4%FWT ER Plate A S17 7.00 5.60 6.40 - 0.60 8.6%FWT ER Plate A S17 7.00 5.60 6.90 - 0.10 1.4%FWT ER Plate A S17 7.00 5.60 6.90 - 0.10 1.4%FWT ER Plate A S17 7.00 5.60 6.80 - 0.20 2.9%FWT ER Plate B S17 9.00 7.20 8.90 9.00 0.10 1.1% 0.00 0.0%FWT ER Plate B S17 9.00 7.20 8.60 8.90 0.40 4.4% 0.10 1.1%
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
Operator's Signature: Trans bhd Page 29
![Page 37: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/37.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
FWT N.A. Stiffener 1 S17 8.00 6.00 7.30 7.20 0.70 8.8% 0.80 10.0%FWT N.A. Stiffener 2 S17 8.00 6.00 7.30 7.30 0.70 8.8% 0.70 8.8%FWT N.A. Stiffener 3 S17 8.00 6.00 8.20 8.30 0.00 0.0% 0.00 0.0%FWT N.A. Stiffener 4 S17 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%FWT N.A. Stiffener 5 S17 8.00 6.00 7.80 7.90 0.20 2.5% 0.10 1.3%FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.90 0.10 1.3% -FWT N.A. CL BHD CLB1 S17 8.00 6.40 8.00 0.00 0.0% -FWT N.A. Side girder GRD S17 8.00 6.40 8.40 8.50 0.00 0.0% 0.00 0.0%FWT ER Bottom Bottom S17 8.00 6.40 8.00 - 0.00 0.0%FWT ER Bottom Bottom S17 8.00 6.40 8.10 - 0.00 0.0%
- -CHAIN LOCKER FR.78 - -
- -N.A. N.A. Plate A S14 9.00 7.20 9.00 9.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A S14 9.00 7.20 9.00 9.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A S14 9.00 7.20 9.00 9.00 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A S14 9.00 7.20 9.00 0.00 0.0% -N.A. N.A. Plate A S14 9.00 7.20 8.30 8.20 0.70 7.8% 0.80 8.9%N.A. N.A. Plate A S14 9.00 7.20 8.70 8.20 0.30 3.3% 0.80 8.9%N.A. N.A. Plate A S14 9.00 7.20 7.90 7.80 1.10 12.2% 1.20 13.3%N.A. N.A. Plate A S14 9.00 7.20 8.90 8.40 0.10 1.1% 0.60 6.7%N.A. N.A. Plate A S14 9.00 7.20 8.90 8.30 0.10 1.1% 0.70 7.8%N.A. N.A. Plate A S14 9.00 7.20 8.90 8.30 0.10 1.1% 0.70 7.8%N.A. N.A. Plate A S14 9.00 7.20 7.40 8.00 1.60 17.8% 1.00 11.1% To be renewedN.A. N.A. Plate A S14 9.00 7.20 7.00 7.00 2.00 22.2% 2.00 22.2% To be renewedN.A. N.A. Plate A S14 9.00 7.20 6.80 7.00 2.20 24.4% 2.00 22.2% To be renewedN.A. N.A. Plate A S14 9.00 7.20 7.30 6.50 1.70 18.9% 2.50 27.8% To be renewedN.A. N.A. Plate A S14 9.00 7.20 5.90 6.20 3.10 34.4% 2.80 31.1% To be renewedN.A. N.A. Plate A S14 9.00 7.20 6.70 6.60 2.30 25.6% 2.40 26.7% To be renewedN.A. N.A. Plate A S14 9.00 7.20 7.40 8.30 1.60 17.8% 0.70 7.8% To be renewedN.A. N.A. Plate A S14 9.00 7.20 8.20 8.20 0.80 8.9% 0.80 8.9%N.A. N.A. Plate A S14 9.00 7.20 7.00 7.90 2.00 22.2% 1.10 12.2% To be renewedN.A. N.A. Plate A S14 9.00 7.20 8.10 8.20 0.90 10.0% 0.80 8.9%N.A. N.A. Plate A S14 9.00 7.20 8.30 8.40 0.70 7.8% 0.60 6.7%N.A. N.A. Plate A S14 9.00 7.20 8.00 8.50 1.00 11.1% 0.50 5.6%N.A. N.A. Plate A S14 9.00 7.20 7.80 6.80 1.20 13.3% 2.20 24.4% To be renewedN.A. N.A. Plate A S14 9.00 7.20 7.60 6.50 1.40 15.6% 2.50 27.8% To be renewedN.A. N.A. Plate A S14 9.00 7.20 8.20 6.30 0.80 8.9% 2.70 30.0% To be renewedN.A. N.A. Plate A S14 9.00 7.20 7.40 6.10 1.60 17.8% 2.90 32.2% To be renewedN.A. N.A. Plate A S14 9.00 7.20 7.30 6.70 1.70 18.9% 2.30 25.6% To be renewedN.A. N.A. Plate A S14 9.00 7.20 7.50 5.70 1.50 16.7% 3.30 36.7% To be renewedN.A. N.A. Plate B S14 9.50 7.60 9.50 9.50 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 9.50 7.60 9.50 - 0.00 0.0%
Operator's Signature: Trans bhd Page 30
![Page 38: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/38.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. N.A. Plate B S14 9.50 7.60 9.40 - 0.10 1.1%N.A. N.A. Plate B S14 9.50 7.60 7.80 6.80 1.70 17.9% 2.70 28.4% To be renewedN.A. N.A. Plate B S14 9.50 7.60 6.10 6.40 3.40 35.8% 3.10 32.6% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.00 7.30 2.50 26.3% 2.20 23.2% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.40 7.90 2.10 22.1% 1.60 16.8% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.40 6.70 2.10 22.1% 2.80 29.5% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.20 6.70 2.30 24.2% 2.80 29.5% To be renewedN.A. N.A. Plate B S14 9.50 7.60 9.40 6.50 0.10 1.1% 3.00 31.6% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.90 6.50 1.60 16.8% 3.00 31.6% To be renewedN.A. N.A. Plate B S14 9.50 7.60 6.90 6.00 2.60 27.4% 3.50 36.8% To be renewedN.A. N.A. Plate B S14 9.50 7.60 9.40 9.10 0.10 1.1% 0.40 4.2%N.A. N.A. Plate B S14 9.50 7.60 7.70 6.10 1.80 18.9% 3.40 35.8% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.40 5.90 2.10 22.1% 3.60 37.9% To be renewedN.A. N.A. Plate B S14 9.50 7.60 9.40 7.40 0.10 1.1% 2.10 22.1% To be renewedN.A. N.A. Plate B S14 9.50 7.60 8.40 7.30 1.10 11.6% 2.20 23.2% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.40 6.80 2.10 22.1% 2.70 28.4% To be renewedN.A. N.A. Plate B S14 9.50 7.60 9.20 7.60 0.30 3.2% 1.90 20.0% To be renewedN.A. N.A. Plate B S14 9.50 7.60 9.20 7.40 0.30 3.2% 2.10 22.1% To be renewedN.A. N.A. Plate B S14 9.50 7.60 8.00 7.80 1.50 15.8% 1.70 17.9% To be renewedN.A. N.A. Plate B S14 9.50 7.60 6.70 6.60 2.80 29.5% 2.90 30.5% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.30 6.00 2.20 23.2% 3.50 36.8% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.30 5.90 2.20 23.2% 3.60 37.9% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.70 6.70 1.80 18.9% 2.80 29.5% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.70 5.80 1.80 18.9% 3.70 38.9% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.80 6.50 1.70 17.9% 3.00 31.6% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.60 6.60 1.90 20.0% 2.90 30.5% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.70 7.10 1.80 18.9% 2.40 25.3% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.80 7.40 1.70 17.9% 2.10 22.1% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.20 6.80 2.30 24.2% 2.70 28.4% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.80 7.00 1.70 17.9% 2.50 26.3% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.40 9.40 2.10 22.1% 0.10 1.1% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.80 7.10 1.70 17.9% 2.40 25.3% To be renewedN.A. N.A. Plate B S14 9.50 7.60 8.00 7.50 1.50 15.8% 2.00 21.1% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.80 9.30 1.70 17.9% 0.20 2.1% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.40 7.60 2.10 22.1% 1.90 20.0% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.30 9.30 2.20 23.2% 0.20 2.1% To be renewedN.A. N.A. Plate B S14 9.50 7.60 7.80 9.30 1.70 17.9% 0.20 2.1% To be renewedN.A. N.A. Plate C S14 8.00 6.40 8.30 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate C S14 8.00 6.40 8.20 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener CL S14 8.00 6.00 7.70 0.30 3.8% -N.A. N.A. Stiffener a S14 8.00 6.00 8.00 7.90 0.00 0.0% 0.10 1.3%N.A. N.A. Stiffener b S14 8.00 6.00 7.90 8.00 0.10 1.3% 0.00 0.0%
- -
Operator's Signature: Trans bhd Page 31
![Page 39: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/39.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
CHAIN LOCKER FR.80 - -- -
N.A. N.A. Plate A S14 8.00 6.40 7.30 7.40 0.70 8.8% 0.60 7.5%N.A. N.A. Plate A S14 8.00 6.40 7.00 7.30 1.00 12.5% 0.70 8.8%N.A. N.A. Plate A S14 8.00 6.40 7.30 7.20 0.70 8.8% 0.80 10.0%N.A. N.A. Plate A S14 8.00 6.40 5.90 7.60 2.10 26.3% 0.40 5.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.70 7.20 1.30 16.3% 0.80 10.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.00 7.10 1.00 12.5% 0.90 11.3%N.A. N.A. Plate A S14 8.00 6.40 6.60 5.60 1.40 17.5% 2.40 30.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.60 6.30 1.40 17.5% 1.70 21.3% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.20 5.00 1.80 22.5% 3.00 37.5% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.60 5.50 2.40 30.0% 2.50 31.3% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.80 6.70 2.20 27.5% 1.30 16.3% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.00 5.40 2.00 25.0% 2.60 32.5% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.40 7.00 2.60 32.5% 1.00 12.5% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.30 6.60 2.70 33.8% 1.40 17.5% To be renewedN.A. N.A. Plate A S14 8.00 6.40 4.90 5.50 3.10 38.8% 2.50 31.3% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.40 7.20 1.60 20.0% 0.80 10.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 4.70 6.30 3.30 41.3% 1.70 21.3% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.30 6.40 2.70 33.8% 1.60 20.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.20 6.90 2.80 35.0% 1.10 13.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.80 8.20 2.20 27.5% 0.00 0.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.80 8.20 2.20 27.5% 0.00 0.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.80 6.90 2.20 27.5% 1.10 13.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.00 8.10 2.00 25.0% 0.00 0.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.40 8.00 2.60 32.5% 0.00 0.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.50 7.30 1.50 18.8% 0.70 8.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 8.20 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A S14 8.00 6.40 6.70 8.10 1.30 16.3% 0.00 0.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.00 6.90 1.00 12.5% 1.10 13.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 8.30 6.10 0.00 0.0% 1.90 23.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.80 7.20 0.20 2.5% 0.80 10.0%N.A. N.A. Plate A S14 8.00 6.40 7.90 8.00 0.10 1.3% 0.00 0.0%N.A. N.A. Plate A S14 8.00 6.40 8.30 7.40 0.00 0.0% 0.60 7.5%N.A. N.A. Plate A S14 8.00 6.40 8.00 7.70 0.00 0.0% 0.30 3.8%N.A. N.A. Plate A S14 8.00 6.40 8.20 4.90 0.00 0.0% 3.10 38.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 8.00 6.60 0.00 0.0% 1.40 17.5% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.90 6.50 1.10 13.8% 1.50 18.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.30 4.90 0.70 8.8% 3.10 38.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.40 4.90 0.60 7.5% 3.10 38.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.30 5.30 0.70 8.8% 2.70 33.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.30 4.90 0.70 8.8% 3.10 38.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.40 5.80 0.60 7.5% 2.20 27.5% To be renewed
Operator's Signature: Trans bhd Page 32
![Page 40: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/40.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. N.A. Plate A S14 8.00 6.40 5.00 6.30 3.00 37.5% 1.70 21.3% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.80 5.20 2.20 27.5% 2.80 35.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.80 5.30 1.20 15.0% 2.70 33.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.20 6.80 2.80 35.0% 1.20 15.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.60 6.90 2.40 30.0% 1.10 13.8% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.60 7.60 1.40 17.5% 0.40 5.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.90 8.10 2.10 26.3% 0.00 0.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.30 7.80 2.70 33.8% 0.20 2.5% To be renewedN.A. N.A. Plate A S14 8.00 6.40 5.30 8.30 2.70 33.8% 0.00 0.0% To be renewedN.A. N.A. Plate A S14 8.00 6.40 6.00 7.00 2.00 25.0% 1.00 12.5% To be renewedN.A. N.A. Plate A S14 8.00 6.40 7.00 8.20 1.00 12.5% 0.00 0.0%N.A. N.A. Plate A S14 8.00 6.40 7.20 0.80 10.0% -N.A. N.A. Plate A S14 8.00 6.40 7.00 1.00 12.5% -N.A. N.A. Plate A S14 8.00 6.40 8.00 0.00 0.0% -N.A. N.A. Plate A S14 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate A S14 8.00 6.40 7.00 1.00 12.5% -N.A. N.A. Plate A S14 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate A S14 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate A S14 8.00 6.40 8.00 0.00 0.0% -N.A. N.A. Plate A S14 8.00 6.40 7.80 0.20 2.5% -N.A. N.A. Plate A S14 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate A S14 8.00 6.40 8.00 0.00 0.0% -N.A. N.A. Plate A S14 8.00 6.40 7.40 0.60 7.5% -N.A. N.A. Plate A S14 8.00 6.40 8.10 0.00 0.0% -N.A. N.A. Plate B S14 8.00 6.40 8.10 8.40 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.20 8.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.20 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.30 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.10 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.30 8.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.40 8.50 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.30 8.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.40 8.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.30 8.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.40 8.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.30 8.40 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 8.00 6.40 8.30 0.00 0.0% -N.A. N.A. Plate B S14 8.00 6.40 8.30 0.00 0.0% -N.A. N.A. Plate B S14 8.00 6.40 8.50 0.00 0.0% -N.A. N.A. Plate B S14 8.00 6.40 8.30 0.00 0.0% -N.A. N.A. Plate B S14 8.00 6.40 8.30 0.00 0.0% -N.A. N.A. Plate B S14 8.00 6.40 8.40 0.00 0.0% -N.A. N.A. Plate B S14 8.00 6.40 8.40 0.00 0.0% -
Operator's Signature: Trans bhd Page 33
![Page 41: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/41.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. N.A. Plate C S14 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate C S14 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener Lower, a S14 6.00 4.50 6.20 6.10 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener Middle, a S14 6.00 4.50 6.20 6.10 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener Upper, a S14 8.00 6.00 7.90 7.00 0.10 1.3% 1.00 12.5%N.A. N.A. Stiffener b S14 7.00 5.25 7.10 7.00 0.00 0.0% 0.00 0.0%N.A. N.A. Stiffener c S14 7.00 5.25 7.10 7.00 0.00 0.0% 0.00 0.0%
- -FR.82 - -
- -Bow THR FPT Plate A S13 8.00 6.40 7.50 8.00 0.50 6.3% 0.00 0.0%Bow THR FPT Plate A S13 8.00 6.40 7.70 7.70 0.30 3.8% 0.30 3.8%Bow THR FPT Plate A S13 8.00 6.40 7.50 7.20 0.50 6.3% 0.80 10.0%Bow THR FPT Plate A S13 8.00 6.40 7.00 7.10 1.00 12.5% 0.90 11.3%Bow THR FPT Plate A S13 8.00 6.40 7.40 7.00 0.60 7.5% 1.00 12.5%Bow THR FPT Plate A S13 8.00 6.40 7.90 6.80 0.10 1.3% 1.20 15.0%Bow THR FPT Plate A S13 8.00 6.40 8.00 7.90 0.00 0.0% 0.10 1.3%Bow THR FPT Plate A S13 8.00 6.40 7.90 7.70 0.10 1.3% 0.30 3.8%Bow THR FPT Plate A S13 8.00 6.40 7.50 8.10 0.50 6.3% 0.00 0.0%Bow THR FPT Plate A S13 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%Bow THR FPT Plate A S13 8.00 6.40 6.90 7.90 1.10 13.8% 0.10 1.3%Bow THR FPT Plate A S13 8.00 6.40 7.80 8.00 0.20 2.5% 0.00 0.0%Bow THR FPT Plate A S13 8.00 6.40 8.00 6.90 0.00 0.0% 1.10 13.8%Bow THR FPT Plate A S13 8.00 6.40 7.60 7.90 0.40 5.0% 0.10 1.3%Bow THR FPT Plate A S13 8.00 6.40 7.70 - 0.30 3.8%Bow THR FPT Plate A S13 8.00 6.40 7.80 - 0.20 2.5%Bow THR FPT Plate B S13 8.00 6.40 7.80 7.80 0.20 2.5% 0.20 2.5%Bow THR FPT Plate B S13 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%Bow THR FPT Plate B S13 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%Bow THR FPT Plate B S13 8.00 6.40 7.70 7.60 0.30 3.8% 0.40 5.0%Bow THR FPT Plate B S13 8.00 6.40 8.00 7.90 0.00 0.0% 0.10 1.3%Bow THR FPT Plate B S13 8.00 6.40 7.50 7.60 0.50 6.3% 0.40 5.0%Bow THR FPT Plate B S13 8.00 6.40 7.80 7.80 0.20 2.5% 0.20 2.5%Bow THR FPT Plate B S13 8.00 6.40 7.70 7.80 0.30 3.8% 0.20 2.5%Bow THR FPT Plate B S13 8.00 6.40 8.00 - 0.00 0.0%Bow THR FPT Plate C S13 8.00 6.40 7.20 7.10 0.80 10.0% 0.90 11.3%Bow THR FPT Plate C S13 8.00 6.40 7.00 6.80 1.00 12.5% 1.20 15.0%Bow THR N.A. Stiffener aCL S13 6.00 4.50 6.10 0.00 0.0% -Bow THR N.A. Stiffener a1 S13 6.00 4.50 6.00 6.10 0.00 0.0% 0.00 0.0%Bow THR N.A. Stiffener a2 S13 6.00 4.50 6.10 6.00 0.00 0.0% 0.00 0.0%Bow THR N.A. Stiffener a3 S13 6.00 4.50 6.10 6.00 0.00 0.0% 0.00 0.0%Bow THR N.A. Stiffener a4 S13 6.00 4.50 6.00 6.10 0.00 0.0% 0.00 0.0%Bow THR N.A. Stiffener a5 S13 6.00 4.50 6.00 6.10 0.00 0.0% 0.00 0.0%
Operator's Signature: Trans bhd Page 34
![Page 42: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/42.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
Bow THR N.A. Stiffener bCL S13 7.00 5.25 7.30 0.00 0.0% -Bow THR N.A. Stiffener b1 S13 7.00 5.25 7.20 7.20 0.00 0.0% 0.00 0.0%Bow THR N.A. Stiffener b2 S13 7.00 5.25 7.20 7.40 0.00 0.0% 0.00 0.0%Bow THR N.A. Stiffener cCL S13 7.00 5.25 7.30 0.00 0.0% -Bow THR N.A. Stiffener c1 S13 7.00 5.25 7.30 7.40 0.00 0.0% 0.00 0.0%Bow THR N.A. Stiffener d1 S13 7.00 5.25 6.70 6.80 0.30 4.3% 0.20 2.9%Bow THR N.A. Stiffener e S13 7.00 5.25 7.20 7.20 0.00 0.0% 0.00 0.0%
- -FR.36 - -
- -DT DB 3 DBT 4 CT Plate A S19 6.50 5.20 6.10 6.20 0.40 6.2% 0.30 4.6%DT DB 3 DBT 4 CT Plate A S19 6.50 5.20 6.10 6.20 0.40 6.2% 0.30 4.6%DT DB 3 DBT 4 CT Plate A S19 6.50 5.20 10.30 10.30 0.00 0.0% 0.00 0.0%DT DB 3 DBT 4 CT Plate A S19 6.50 5.20 10.30 10.20 0.00 0.0% 0.00 0.0%DT DB 3 DBT 4 CT Plate A S19 6.50 5.20 10.30 10.30 0.00 0.0% 0.00 0.0%DT DB 3 DBT 4 CT Plate A S19 6.50 5.20 10.30 - 0.00 0.0%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 10.20 10.20 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 10.20 10.20 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 6.30 6.50 0.20 3.1% 0.00 0.0%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 6.30 6.60 0.20 3.1% 0.00 0.0%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 6.50 6.50 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 6.50 - 0.00 0.0%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 6.30 - 0.20 3.1%DT DB 3 DT DB 4 Plate A S19 6.50 5.20 6.30 - 0.20 3.1%DT DB 3 DT DB 4 Plate B S19 6.50 5.20 6.20 6.20 0.30 4.6% 0.30 4.6%DT DB 3 DT DB 4 Plate B S19 6.50 5.20 6.20 6.20 0.30 4.6% 0.30 4.6%DT DB 3 DT DB 4 Plate B S19 6.50 5.20 6.30 6.20 0.20 3.1% 0.30 4.6%DT DB 3 DT DB 4 Plate B S19 6.50 5.20 8.10 10.20 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 4 Plate B S19 6.50 5.20 8.10 0.00 0.0% -DT DB 3 DT DB 4 Plate C S19 6.50 5.20 8.00 6.40 0.00 0.0% 0.10 1.5%DT DB 3 DT DB 4 Plate C S19 6.50 5.20 8.00 7.70 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 4 Plate C S19 6.50 5.20 6.20 8.00 0.30 4.6% 0.00 0.0%DT DB 3 DT DB 4 Plate C S19 6.50 5.20 6.30 8.00 0.20 3.1% 0.00 0.0%DT DB 3 DT DB 4 Plate C S19 6.50 5.20 6.10 6.30 0.40 6.2% 0.20 3.1%DT DB 3 DT DB 4 Plate C S19 6.50 5.20 6.30 6.30 0.20 3.1% 0.20 3.1%DT DB 3 N.A. Bracket web 1 S19 6.50 4.88 6.40 6.30 0.10 1.5% 0.20 3.1%DT DB 3 N.A. Bracket flange 1 S19 6.50 4.88 6.10 5.30 0.40 6.2% 1.20 18.5%DT DB 3 N.A. Bracket web 2 S19 6.50 4.88 6.50 6.50 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 2 S19 6.50 4.88 6.30 6.50 0.20 3.1% 0.00 0.0%DT DB 3 N.A. Bracket web 3 S19 6.50 4.88 6.30 6.20 0.20 3.1% 0.30 4.6%DT DB 3 N.A. Bracket flange 3 S19 6.50 4.88 6.50 6.30 0.00 0.0% 0.20 3.1%DT DB 3 N.A. Bracket web 4 S19 6.50 4.88 6.40 5.70 0.10 1.5% 0.80 12.3%DT DB 3 N.A. Bracket flange 4 S19 6.50 4.88 6.30 6.20 0.20 3.1% 0.30 4.6%
Operator's Signature: Trans bhd Page 35
![Page 43: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/43.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DT DB 3 N.A. Bracket web 5 S19 6.50 4.88 6.80 6.60 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 5 S19 6.50 4.88 6.70 5.80 0.00 0.0% 0.70 10.8%DT DB 3 N.A. Bracket web 6 S19 6.50 4.88 6.90 6.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 6 S19 6.50 4.88 5.90 5.90 0.60 9.2% 0.60 9.2%DT DB 3 N.A. Lower stiffener 7 S19 7.00 5.25 7.10 7.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Upper stiffener 7 S19 7.00 5.25 7.10 7.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 1 S19 8.00 6.00 8.00 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 2 S19 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 3 S19 8.00 6.00 7.80 7.90 0.20 2.5% 0.10 1.3%DT DB 3 N.A. Inner bottom longitudinal 4 S19 8.00 6.00 7.90 8.00 0.10 1.3% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 5 S19 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 6 S19 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 1 S19 7.00 5.25 8.30 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 2 S19 7.00 5.25 7.90 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 3 S19 7.00 5.25 8.20 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 4 S19 7.00 5.25 8.00 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 5 S19 7.00 5.25 8.20 8.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 6 S19 7.00 5.25 8.00 7.70 0.00 0.0% 0.00 0.0%
- -FR.56 - -
- -DT DB 3 DT DB 2 Plate A S19 6.50 5.20 6.70 6.90 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 6.70 7.10 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 7.10 6.90 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 7.10 7.10 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 7.10 7.00 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 7.10 7.20 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 7.20 7.00 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 7.20 8.10 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate A S19 6.50 5.20 7.10 8.10 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate B S19 6.50 5.20 6.40 6.50 0.10 1.5% 0.00 0.0%DT DB 3 DT DB 2 Plate B S19 6.50 5.20 6.40 6.40 0.10 1.5% 0.10 1.5%DT DB 3 DT DB 2 Plate B S19 6.50 5.20 6.30 6.40 0.20 3.1% 0.10 1.5%DT DB 3 DT DB 2 Plate B S19 6.50 5.20 9.70 6.50 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate B S19 6.50 5.20 9.70 8.10 0.00 0.0% 0.00 0.0%DT DB 3 DT DB 2 Plate C S19 6.50 5.20 6.60 6.30 0.00 0.0% 0.20 3.1%DT DB 3 DT DB 2 Plate C S19 6.50 5.20 6.50 6.40 0.00 0.0% 0.10 1.5%DT DB 3 DT DB 2 Plate C S19 6.50 5.20 6.50 6.30 0.00 0.0% 0.20 3.1%DT DB 3 DT DB 2 Plate C S19 6.50 5.20 9.20 6.40 0.00 0.0% 0.10 1.5%DT DB 3 DT DB 2 Plate C S19 6.50 5.20 9.20 0.00 0.0% -DT DB 3 N.A. Bracket web 1 S19 6.50 4.88 6.50 6.90 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 1 S19 6.50 4.88 5.90 6.40 0.60 9.2% 0.10 1.5%DT DB 3 N.A. Bracket web 2 S19 6.50 4.88 6.70 6.80 0.00 0.0% 0.00 0.0%
Operator's Signature: Trans bhd Page 36
![Page 44: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/44.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DT DB 3 N.A. Bracket flange 2 S19 6.50 4.88 6.50 6.10 0.00 0.0% 0.40 6.2%DT DB 3 N.A. Bracket web 3 S19 6.50 4.88 6.60 7.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 3 S19 6.50 4.88 6.50 6.30 0.00 0.0% 0.20 3.1%DT DB 3 N.A. Bracket web 4 S19 6.50 4.88 6.80 7.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 4 S19 6.50 4.88 6.40 6.30 0.10 1.5% 0.20 3.1%DT DB 3 N.A. Bracket web 5 S19 6.50 4.88 6.90 6.60 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 5 S19 6.50 4.88 6.20 6.30 0.30 4.6% 0.20 3.1%DT DB 3 N.A. Bracket web 6 S19 6.50 4.88 6.80 6.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bracket flange 6 S19 6.50 4.88 6.70 6.30 0.00 0.0% 0.20 3.1%DT DB 3 N.A. Lower stiffener 7 S19 7.00 5.25 7.10 7.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Upper stiffener 7 S19 7.00 5.25 7.10 7.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 1 S19 8.00 6.00 7.80 8.10 0.20 2.5% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 2 S19 8.00 6.00 7.80 7.90 0.20 2.5% 0.10 1.3%DT DB 3 N.A. Inner bottom longitudinal 3 S19 8.00 6.00 8.40 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 4 S19 8.00 6.00 7.80 8.00 0.20 2.5% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 5 S19 8.00 6.00 7.90 8.30 0.10 1.3% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 6 S19 8.00 6.00 8.20 7.80 0.00 0.0% 0.20 2.5%DT DB 3 N.A. Bottom longitudinal 1 S19 7.00 5.25 7.80 8.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 2 S19 7.00 5.25 8.20 7.80 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 3 S19 7.00 5.25 8.20 8.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 4 S19 7.00 5.25 8.40 7.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 5 S19 7.00 5.25 7.60 8.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 6 S19 7.00 5.25 7.80 7.80 0.00 0.0% 0.00 0.0%
- -FR.72 - -
- -DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.20 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.20 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.30 10.20 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.20 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.20 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.20 10.00 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 9.90 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.00 10.20 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.10 0.00 0.0% 0.00 0.0%DBT 1 DT DB 2 Plate A S23 6.50 5.20 10.10 10.00 0.00 0.0% 0.00 0.0%DBT 1 N.A. Bracket web 1 S23 6.50 4.88 5.80 8.10 0.70 10.8% 0.00 0.0%DBT 1 N.A. Bracket flange 1 S23 6.50 4.88 5.90 8.20 0.60 9.2% 0.00 0.0%
Operator's Signature: Trans bhd Page 37
![Page 45: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/45.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
DBT 1 N.A. Bracket web 2 S23 6.50 4.88 5.80 6.00 0.70 10.8% 0.50 7.7%DBT 1 N.A. Bracket flange 2 S23 6.50 4.88 5.70 5.90 0.80 12.3% 0.60 9.2%DBT 1 N.A. CL girder CL S23 8.00 6.40 8.10 0.00 0.0% -DBT 1 N.A. CL girder CL S23 8.00 6.40 8.10 0.00 0.0% -DBT 1 N.A. Bottom girder GRD1 S23 6.50 5.20 6.70 8.10 0.00 0.0% 0.00 0.0%DBT 1 N.A. Bottom girder GRD1 S23 6.50 5.20 6.70 8.10 0.00 0.0% 0.00 0.0%DBT 1 N.A. Bottom girder GRD2 S23 6.50 5.20 6.20 8.10 0.30 4.6% 0.00 0.0%DBT 1 N.A. Bottom girder GRD2 S23 6.50 5.20 7.90 8.10 0.00 0.0% 0.00 0.0%
- -FR.19 - -
- -Cargo hold ER Plate A S24 6.00 4.80 12.20 12.20 0.00 0.0% 0.00 0.0%Cargo hold ER Plate A S24 6.00 4.80 12.20 12.10 0.00 0.0% 0.00 0.0%Cargo hold ER Plate A S24 6.00 4.80 12.20 12.20 0.00 0.0% 0.00 0.0%Cargo hold ER Plate A S24 6.00 4.80 12.20 12.00 0.00 0.0% 0.00 0.0%Cargo hold ER Plate A S24 6.00 4.80 12.20 12.00 0.00 0.0% 0.00 0.0%Cargo hold ER Plate B S24 6.00 4.80 5.70 0.30 5.0% -Cargo hold ER Plate B S24 6.00 4.80 5.70 0.30 5.0% -Cargo hold ER Plate B S24 6.00 4.80 5.80 0.20 3.3% -Cargo hold ER Plate B S24 6.00 4.80 5.60 0.40 6.7% -
Operator's Signature: Trans bhd Page 38
![Page 46: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/46.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
N.A. SEACHEST - -N.A. - -
N.A. ER Plate Fr.17 S12 15.00 12.00 15.10 0.00 0.0% -N.A. ER Plate Fr.17 S12 15.00 12.00 15.10 0.00 0.0% -N.A. ER Plate Fr.17 S12 15.00 12.00 14.80 0.20 1.3% -N.A. ER Plate Fr.17 S12 15.00 12.00 15.10 0.00 0.0% -N.A. ER Plate Fr.16 S12 15.00 12.00 15.00 0.00 0.0% -N.A. ER Plate Fr.16 S12 15.00 12.00 15.30 0.00 0.0% -N.A. ER Plate Fr.16 S12 15.00 12.00 15.20 0.00 0.0% -N.A. ER Plate Fr.16 S12 15.00 12.00 15.30 0.00 0.0% -N.A. ER Longitudinal BHD Fr.16-17 S12 15.00 12.00 15.00 0.00 0.0% -N.A. ER Longitudinal BHD Fr.16-17 S12 15.00 12.00 14.90 0.10 0.7% -N.A. ER Longitudinal BHD Fr.16-17 S12 15.00 12.00 14.50 0.50 3.3% -N.A. ER Longitudinal BHD Fr.16-17 S12 15.00 12.00 14.90 0.10 0.7% -N.A. ER Longitudinal BHD Fr.16-17 S12 15.00 12.00 15.10 0.00 0.0% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.70 0.30 2.0% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.80 0.20 1.3% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.50 0.50 3.3% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.00 1.00 6.7% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.00 1.00 6.7% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.80 0.20 1.3% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.90 0.10 0.7% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 14.90 0.10 0.7% -N.A. ER Top plate Fr.16-17 S12 15.00 12.00 15.00 0.00 0.0% -
N.A. - -N.A. FWT FR.4 - -N.A. - -
FWT N.A. Plate A S17 7.00 5.60 6.70 7.80 0.30 4.3% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 6.90 6.80 0.10 1.4% 0.20 2.9%FWT N.A. Plate A S17 7.00 5.60 6.70 6.90 0.30 4.3% 0.10 1.4%FWT N.A. Plate A S17 7.00 5.60 7.00 6.90 0.00 0.0% 0.10 1.4%FWT N.A. Plate A S17 7.00 5.60 6.80 6.70 0.20 2.9% 0.30 4.3%FWT N.A. Plate A S17 7.00 5.60 6.90 7.00 0.10 1.4% 0.00 0.0%FWT N.A. Plate B S17 7.00 5.60 6.70 6.70 0.30 4.3% 0.30 4.3%FWT N.A. Plate B S17 7.00 5.60 6.70 6.70 0.30 4.3% 0.30 4.3%FWT N.A. Plate B S17 7.00 5.60 6.70 - 0.30 4.3%FWT N.A. Stiffener 1 S17 8.00 6.00 7.10 7.10 0.90 11.3% 0.90 11.3%FWT N.A. Stiffener 2 S17 8.00 6.00 7.10 7.10 0.90 11.3% 0.90 11.3%FWT N.A. Stiffener 3 S17 8.00 6.00 7.20 7.10 0.80 10.0% 0.90 11.3%FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.50 0.50 6.3% -FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.80 0.20 2.5% -FWT N.A. CL BHD CLB2 S17 12.00 9.60 12.40 0.00 0.0% -FWT N.A. Side girder GRD S17 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.40 7.40 0.00 0.0% 0.00 0.0%
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
Operator's Signature: Internal structures Page 39
![Page 47: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/47.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
FWT ER Tank top Tanktop S17 7.00 5.60 7.30 7.20 0.00 0.0% 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.30 - 0.00 0.0%
N.A. - -N.A. FWT FR.5 - -N.A. - -
FWT N.A. Plate A S17 7.00 5.60 6.90 7.00 0.10 1.4% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 7.00 7.10 0.00 0.0% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 6.80 7.00 0.20 2.9% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 6.90 6.70 0.10 1.4% 0.30 4.3%FWT N.A. Plate A S17 7.00 5.60 6.80 6.90 0.20 2.9% 0.10 1.4%FWT N.A. Plate A S17 7.00 5.60 7.00 7.10 0.00 0.0% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 6.90 - 0.10 1.4%FWT N.A. Plate A S17 7.00 5.60 6.30 - 0.70 10.0%FWT N.A. Plate A S17 7.00 5.60 6.90 - 0.10 1.4%FWT N.A. Plate A S17 7.00 5.60 7.20 - 0.00 0.0%FWT N.A. Plate B S17 7.00 5.60 6.90 6.80 0.10 1.4% 0.20 2.9%FWT N.A. Plate B S17 7.00 5.60 6.80 6.80 0.20 2.9% 0.20 2.9%FWT N.A. Plate B S17 7.00 5.60 6.70 - 0.30 4.3%FWT N.A. Stiffener 1 S17 8.00 6.00 7.10 7.10 0.90 11.3% 0.90 11.3%FWT N.A. Stiffener 2 S17 8.00 6.00 7.00 7.10 1.00 12.5% 0.90 11.3%FWT N.A. Stiffener 3 S17 8.00 6.00 7.10 7.00 0.90 11.3% 1.00 12.5%FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.70 0.30 3.8% -FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.70 0.30 3.8% -FWT N.A. CL BHD CLB2 S17 12.00 9.60 12.20 0.00 0.0% -FWT N.A. CL BHD CLB2 S17 12.00 9.60 12.20 0.00 0.0% -FWT N.A. Side girder GRD S17 8.00 6.40 8.40 8.30 0.00 0.0% 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.30 - 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.30 - 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.20 - 0.00 0.0%
N.A. - -N.A. FWT FR.6 - -N.A. - -
FWT N.A. Plate A S17 7.00 5.60 7.00 7.00 0.00 0.0% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 6.70 7.00 0.30 4.3% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 6.50 7.00 0.50 7.1% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 7.10 6.80 0.00 0.0% 0.20 2.9%FWT N.A. Plate A S17 7.00 5.60 6.70 7.00 0.30 4.3% 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 6.90 6.80 0.10 1.4% 0.20 2.9%FWT N.A. Plate A S17 7.00 5.60 6.90 - 0.10 1.4%FWT N.A. Plate A S17 7.00 5.60 7.10 - 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 7.00 - 0.00 0.0%FWT N.A. Plate A S17 7.00 5.60 7.00 - 0.00 0.0%FWT N.A. Plate B S17 7.00 5.60 6.90 6.80 0.10 1.4% 0.20 2.9%
Operator's Signature: Internal structures Page 40
![Page 48: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/48.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
FWT N.A. Plate B S17 7.00 5.60 6.90 6.90 0.10 1.4% 0.10 1.4%FWT N.A. Plate B S17 7.00 5.60 6.80 - 0.20 2.9%FWT N.A. Plate B S17 7.00 5.60 6.90 - 0.10 1.4%FWT N.A. Stiffener 1 S17 8.00 6.00 7.10 7.10 0.90 11.3% 0.90 11.3%FWT N.A. Stiffener 2 S17 8.00 6.00 7.20 7.00 0.80 10.0% 1.00 12.5%FWT N.A. Stiffener 3 S17 8.00 6.00 7.00 7.00 1.00 12.5% 1.00 12.5%FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.80 0.20 2.5% -FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.80 0.20 2.5% -FWT N.A. CL BHD CLB1 S17 8.00 6.40 7.40 0.60 7.5% -FWT N.A. Side girder GRD S17 8.00 6.40 8.50 8.40 0.00 0.0% 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.10 7.40 0.00 0.0% 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.30 - 0.00 0.0%FWT ER Tank top Tanktop S17 7.00 5.60 7.10 - 0.00 0.0%FWT ER Bottom Bottom S17 8.00 6.40 7.60 - 0.40 5.0%FWT ER Bottom Bottom S17 8.00 6.40 8.00 - 0.00 0.0%
N.A. - -N.A. START AIR BOTTLES - -N.A. - -
N.A. N.A. Top Short - - - 12.20 - -N.A. N.A. Middle Short - - - 6.90 - -N.A. N.A. Bottom Short - - - 11.20 - -N.A. N.A. Top Long - - - 11.20 - -N.A. N.A. Middle Long - - - 7.10 - -N.A. N.A. Bottom Long - - - 11.40 - -
N.A. - -N.A. CHAIN LOCKER BOTTOM PLATING - -N.A. - -
N.A. N.A. Plate A S14 9.00 7.20 9.30 9.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A S14 9.00 7.20 9.30 9.30 0.00 0.0% 0.00 0.0%N.A. N.A. Plate A S14 9.00 7.20 9.30 - 0.00 0.0%N.A. N.A. Plate B S14 9.00 7.20 9.20 9.10 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 9.00 7.20 9.20 9.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 9.00 7.20 9.30 9.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 9.00 7.20 9.20 9.20 0.00 0.0% 0.00 0.0%N.A. N.A. Plate B S14 9.00 7.20 9.30 9.00 0.00 0.0% 0.00 0.0%
N.A. - -N.A. FR.84 - -N.A. - -
FPT N.A. Beam web A S13 6.50 5.20 6.80 7.40 0.00 0.0% 0.00 0.0%FPT N.A. Beam web A S13 6.50 5.20 6.90 7.10 0.00 0.0% 0.00 0.0%FPT N.A. Beam flange A S13 10.00 7.50 9.40 9.20 0.60 6.0% 0.80 8.0%FPT N.A. Beam flange A S13 10.00 7.50 9.40 9.30 0.60 6.0% 0.70 7.0%FPT N.A. Side shell frame web A S13 6.50 5.20 6.50 6.90 0.00 0.0% 0.00 0.0%
Operator's Signature: Internal structures Page 41
![Page 49: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/49.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
FPT N.A. Side shell frame web A S13 6.50 5.20 6.70 6.50 0.00 0.0% 0.00 0.0%FPT N.A. Side shell frame flange A S13 10.00 7.50 14.30 12.90 0.00 0.0% 0.00 0.0%FPT N.A. Side shell frame flange A S13 10.00 7.50 14.40 12.90 0.00 0.0% 0.00 0.0%FPT N.A. Main deck longitudinal CL S13 8.00 6.00 8.10 0.00 0.0% -FPT N.A. Main deck longitudinal web 1 S13 8.00 6.00 7.70 7.80 0.30 3.8% 0.20 2.5%FPT N.A. Main deck longitudinal flange 1 S13 9.00 6.75 9.40 9.20 0.00 0.0% 0.00 0.0%FPT N.A. Main deck longitudinal 2 S13 8.00 6.00 8.10 8.00 0.00 0.0% 0.00 0.0%FPT N.A. Main deck longitudinal 3 S13 8.00 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%FPT N.A. Main deck longitudinal 4 S13 8.00 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%FPT N.A. Main deck longitudinal 5 S13 8.00 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%FPT N.A. Platform 1 Platform 1 S13 9.50 7.60 9.40 9.40 0.10 1.1% 0.10 1.1%FPT N.A. Platform 1 Platform 1 S13 9.50 7.60 9.40 9.40 0.10 1.1% 0.10 1.1%FPT N.A. Side shell frame web B S13 6.50 5.20 6.60 6.20 0.00 0.0% 0.30 4.6%FPT N.A. Side shell frame web B S13 6.50 5.20 6.00 5.70 0.50 7.7% 0.80 12.3%FPT N.A. Side shell frame web B S13 6.50 5.20 6.20 5.80 0.30 4.6% 0.70 10.8%FPT N.A. Side shell frame web B S13 6.50 5.20 6.50 5.90 0.00 0.0% 0.60 9.2%FPT N.A. Side shell frame web B S13 6.50 5.20 5.40 5.40 1.10 16.9% 1.10 16.9% LocalFPT N.A. Side shell frame flange B S13 6.50 4.88 6.30 5.90 0.20 3.1% 0.60 9.2%FPT N.A. Side shell frame flange B S13 6.50 4.88 5.90 6.50 0.60 9.2% 0.00 0.0%FPT N.A. Side shell frame flange B S13 6.50 4.88 5.30 6.30 1.20 18.5% 0.20 3.1%FPT N.A. Platform 1 stiffener CL S13 9.00 6.75 9.70 0.00 0.0% -FPT N.A. Platform 1 stiffener 1 S13 8.00 6.00 7.50 7.80 0.50 6.3% 0.20 2.5%FPT N.A. Platform 1 bracket BKT S13 8.00 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%FPT N.A. Platform 2 Platform 2 S13 9.50 7.60 9.30 9.40 0.20 2.1% 0.10 1.1%FPT N.A. Platform 2 beam Platform 2 S13 7.00 5.60 7.00 7.00 0.00 0.0% 0.00 0.0%FPT N.A. Stiffener STF S13 6.50 4.88 5.50 9.90 1.00 15.4% 0.00 0.0%FPT N.A. Floor plate C S13 6.00 4.80 7.30 6.80 0.00 0.0% 0.00 0.0%FPT N.A. Floor plate C S13 6.50 5.20 7.20 7.00 0.00 0.0% 0.00 0.0%FPT N.A. Floor flange C S13 8.00 6.00 7.60 7.40 0.40 5.0% 0.60 7.5%FPT N.A. CL girder web CL S13 8.00 6.40 7.30 0.70 8.8% -FPT N.A. CL girder flange CL S13 8.00 6.00 7.80 0.20 2.5% -
N.A. - -N.A. UPPER TANK WEBS - -N.A. - -
Upper tank N.A. Plate Fr.32, A S18 6.50 5.20 5.70 6.00 0.80 12.3% 0.50 7.7%Upper tank N.A. Plate Fr.32, A S18 6.50 5.20 6.10 6.50 0.40 6.2% 0.00 0.0%Upper tank N.A. Plate Fr.32, A S18 6.50 5.20 6.40 6.20 0.10 1.5% 0.30 4.6%Upper tank N.A. Plate Fr.32, A S18 6.50 5.20 6.00 6.20 0.50 7.7% 0.30 4.6%Upper tank N.A. Stiffener Fr.32, a S18 7.00 5.25 7.90 7.60 0.00 0.0% 0.00 0.0%Upper tank N.A. Stiffener Fr.32, b S18 7.00 5.25 7.10 6.90 0.00 0.0% 0.10 1.4%Upper tank N.A. Stiffener Fr.32, c S18 7.00 5.25 6.20 7.30 0.80 11.4% 0.00 0.0%Upper tank N.A. Plate Fr.40, A S18 6.50 5.20 6.80 6.50 0.00 0.0% 0.00 0.0%Upper tank N.A. Plate Fr.40, A S18 6.50 5.20 6.10 6.20 0.40 6.2% 0.30 4.6%
Operator's Signature: Internal structures Page 42
![Page 50: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/50.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
Upper tank N.A. Plate Fr.40, A S18 6.50 5.20 6.50 6.30 0.00 0.0% 0.20 3.1%Upper tank N.A. Plate Fr.40, A S18 6.50 5.20 6.20 6.60 0.30 4.6% 0.00 0.0%Upper tank N.A. Plate Fr.40, A S18 6.50 5.20 6.10 0.40 6.2% -Upper tank N.A. Plate Fr.40, A S18 6.50 5.20 6.30 0.20 3.1% -Upper tank N.A. Stiffener Fr.40, a S18 7.00 5.25 7.60 6.70 0.00 0.0% 0.30 4.3%Upper tank N.A. Stiffener Fr.40, b S18 7.00 5.25 7.10 7.20 0.00 0.0% 0.00 0.0%Upper tank N.A. Stiffener Fr.40, c S18 7.00 5.25 7.50 7.40 0.00 0.0% 0.00 0.0%Upper tank N.A. Plate Fr.52, A S18 6.50 5.20 6.30 6.20 0.20 3.1% 0.30 4.6%Upper tank N.A. Plate Fr.52, A S18 6.50 5.20 6.20 6.50 0.30 4.6% 0.00 0.0%Upper tank N.A. Plate Fr.52, A S18 6.50 5.20 6.30 6.00 0.20 3.1% 0.50 7.7%Upper tank N.A. Plate Fr.52, A S18 6.50 5.20 6.40 6.30 0.10 1.5% 0.20 3.1%Upper tank N.A. Plate Fr.52, A S18 6.50 5.20 6.30 - 0.20 3.1%Upper tank N.A. Plate Fr.52, A S18 6.50 5.20 6.50 - 0.00 0.0%Upper tank N.A. Plate Fr.52, A S18 6.50 5.20 6.50 - 0.00 0.0%Upper tank N.A. Stiffener Fr.52, a S18 7.00 5.25 8.00 8.00 0.00 0.0% 0.00 0.0%Upper tank N.A. Stiffener Fr.52, b S18 7.00 5.25 8.10 8.00 0.00 0.0% 0.00 0.0%Upper tank N.A. Stiffener Fr.52, c S18 7.00 5.25 8.10 7.40 0.00 0.0% 0.00 0.0%
N.A. - -N.A. FR.24 - -N.A. - -
DBT 4 CT N.A. Plate A S20 6.50 5.20 5.60 6.00 0.90 13.8% 0.50 7.7%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.50 6.10 0.00 0.0% 0.40 6.2%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.70 6.30 0.00 0.0% 0.20 3.1%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.50 6.40 0.00 0.0% 0.10 1.5%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.30 5.80 0.20 3.1% 0.70 10.8%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.40 6.50 0.10 1.5% 0.00 0.0%DBT 4 CT N.A. Plate A S20 6.50 5.20 9.90 6.10 0.00 0.0% 0.40 6.2%DBT 4 CT N.A. Plate A S20 6.50 5.20 9.90 6.20 0.00 0.0% 0.30 4.6%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.30 - 0.20 3.1%DT DB 4 N.A. Plate B S20 6.50 5.20 9.10 9.90 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 9.10 10.00 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 6.10 6.50 0.40 6.2% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 6.20 6.50 0.30 4.6% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 5.90 6.40 0.60 9.2% 0.10 1.5%DT DB 4 N.A. Plate B S20 6.50 5.20 6.00 6.40 0.50 7.7% 0.10 1.5%DT DB 4 N.A. Plate B S20 6.50 5.20 6.00 6.30 0.50 7.7% 0.20 3.1%DT DB 4 N.A. Plate B S20 6.50 5.20 6.10 6.10 0.40 6.2% 0.40 6.2%DT DB 4 N.A. Plate B S20 6.50 5.20 6.20 6.00 0.30 4.6% 0.50 7.7%DT DB 4 N.A. Plate B S20 6.50 5.20 8.10 6.00 0.00 0.0% 0.50 7.7%DT DB 4 N.A. Plate B S20 6.50 5.20 8.10 8.20 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 8.20 - 0.00 0.0%DT DB 4 N.A. Plate C S20 6.50 5.20 5.90 6.60 0.60 9.2% 0.00 0.0%DT DB 4 N.A. Plate C S20 6.50 5.20 5.70 6.00 0.80 12.3% 0.50 7.7%
Operator's Signature: Internal structures Page 43
![Page 51: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/51.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
DT DB 4 N.A. Plate C S20 6.50 5.20 9.30 0.00 0.0% -DT DB 4 N.A. Plate C S20 6.50 5.20 9.40 0.00 0.0% -DT DB 4 N.A. Side shell frame web D S20 6.50 5.20 9.10 6.20 0.00 0.0% 0.30 4.6%DT DB 4 N.A. Side shell frame web D S20 6.50 5.20 5.90 6.20 0.60 9.2% 0.30 4.6%DT DB 4 N.A. Side shell frame flange D S20 6.50 5.20 6.90 7.40 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Upper flatbar S20 7.00 5.25 6.90 7.10 0.10 1.4% 0.00 0.0%DT DB 4 N.A. Longitudinal BHD frame E S20 7.00 5.60 7.00 7.00 0.00 0.0% 0.00 0.0%
DBT 4 CT N.A. Stiffener 1 S20 8.00 6.00 5.30 5.30 2.70 33.8% 2.70 33.8% To be renewedDBT 4 CT N.A. Stiffener 2 S20 8.00 6.00 5.40 5.80 2.60 32.5% 2.20 27.5% To be renewedDT DB 4 N.A. Stiffener 4 S20 8.00 6.00 5.70 6.10 2.30 28.8% 1.90 23.8% To be renewedDT DB 4 N.A. Stiffener 5 S20 8.00 6.00 6.20 6.10 1.80 22.5% 1.90 23.8% To be renewedDT DB 4 N.A. Stiffener 6 S20 8.00 6.00 5.50 6.10 2.50 31.3% 1.90 23.8% To be renewed
DBT 4 CT N.A. CL girder CL S20 8.00 6.40 7.30 0.70 8.8% -DBT 4 CT N.A. CL girder CL S20 8.00 6.40 7.30 0.70 8.8% -DBT 4 CT DT DB 4 Side girder GRD S20 6.50 5.20 10.30 10.40 0.00 0.0% 0.00 0.0%DBT 4 CT DT DB 4 Side girder GRD S20 6.50 5.20 10.30 10.40 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Longitudinal BHD lower part S20 6.50 5.20 6.70 6.20 0.00 0.0% 0.30 4.6%DT DB 4 N.A. Longitudinal BHD lower part S20 6.50 5.20 6.70 6.20 0.00 0.0% 0.30 4.6%DT DB 4 N.A. Floor flange C S20 6.50 4.88 5.10 10.30 1.40 21.5% 0.00 0.0% To be renewed
DBT 4 CT N.A. Inner bottom longitudinal 1 S20 8.00 6.00 7.40 8.20 0.60 7.5% 0.00 0.0%DBT 4 CT N.A. Inner bottom longitudinal 2 S20 8.00 6.00 8.20 8.30 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Inner bottom longitudinal 4 S20 8.00 6.00 8.00 8.20 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Inner bottom longitudinal 5 S20 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Inner bottom longitudinal 6 S20 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%
DBT 4 CT N.A. Bottom longitudinal 1 S20 7.00 5.25 6.60 7.00 0.40 5.7% 0.00 0.0%DBT 4 CT N.A. Bottom longitudinal 2 S20 7.00 5.25 7.40 7.40 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Bottom longitudinal 4 S20 7.00 5.25 7.00 7.10 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Bottom longitudinal 5 S20 7.00 5.25 7.00 7.70 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Bottom longitudinal 6 S20 7.00 5.25 8.40 7.10 0.00 0.0% 0.00 0.0%
N.A. - -N.A. FR.32 - -N.A. - -
DBT 4 CT N.A. Plate A S20 6.50 5.20 6.80 6.70 0.00 0.0% 0.00 0.0%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.70 6.70 0.00 0.0% 0.00 0.0%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.80 5.60 0.00 0.0% 0.90 13.8%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.40 6.20 0.10 1.5% 0.30 4.6%DBT 4 CT N.A. Plate A S20 6.50 5.20 6.40 6.90 0.10 1.5% 0.00 0.0%DBT 4 CT N.A. Plate A S20 6.50 5.20 10.00 6.50 0.00 0.0% 0.00 0.0%DBT 4 CT N.A. Plate A S20 6.50 5.20 10.00 0.00 0.0% -DT DB 4 N.A. Plate B S20 6.50 5.20 6.70 10.00 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 6.80 10.00 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 6.30 6.70 0.20 3.1% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 5.90 6.70 0.60 9.2% 0.00 0.0%
Operator's Signature: Internal structures Page 44
![Page 52: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/52.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
DT DB 4 N.A. Plate B S20 6.50 5.20 6.90 6.70 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 6.50 6.60 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate B S20 6.50 5.20 6.70 0.00 0.0% -DT DB 4 N.A. Plate C S20 6.50 5.20 6.10 6.70 0.40 6.2% 0.00 0.0%DT DB 4 N.A. Plate C S20 6.50 5.20 6.10 6.20 0.40 6.2% 0.30 4.6%DT DB 4 N.A. Plate C S20 6.50 5.20 8.00 8.30 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Plate C S20 6.50 5.20 8.20 8.30 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Side shell frame web D S20 6.50 5.20 5.90 6.20 0.60 9.2% 0.30 4.6%DT DB 4 N.A. Side shell frame web D S20 6.50 5.20 6.00 6.20 0.50 7.7% 0.30 4.6%DT DB 4 N.A. Side shell frame flange D S20 6.50 5.20 5.50 5.80 1.00 15.4% 0.70 10.8% To be renewedDT DB 4 N.A. Upper flatbar S20 7.00 5.25 6.30 6.30 0.70 10.0% 0.70 10.0%DT DB 4 N.A. Longitudinal BHD frame E S20 7.00 5.60 6.80 6.80 0.20 2.9% 0.20 2.9%
DBT 4 CT N.A. Stiffener 1 S20 8.00 6.00 6.70 6.90 1.30 16.3% 1.10 13.8%DBT 4 CT N.A. Stiffener 2 S20 8.00 6.00 6.70 7.40 1.30 16.3% 0.60 7.5%DT DB 4 N.A. Stiffener 4 S20 8.00 6.00 6.60 7.70 1.40 17.5% 0.30 3.8%DT DB 4 N.A. Stiffener 5 S20 8.00 6.00 7.70 7.80 0.30 3.8% 0.20 2.5%DT DB 4 N.A. Stiffener 6 S20 8.00 6.00 8.00 7.80 0.00 0.0% 0.20 2.5%
DBT 4 CT N.A. CL girder CL S20 8.00 6.40 8.10 0.00 0.0% -DBT 4 CT N.A. CL girder CL S20 8.00 6.40 8.10 0.00 0.0% -DBT 4 CT DT DB 4 Side girder GRD S20 6.50 5.20 10.10 10.00 0.00 0.0% 0.00 0.0%DBT 4 CT DT DB 4 Side girder GRD S20 6.50 5.20 10.10 10.10 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Longitudinal BHD lower part S20 6.50 5.20 6.00 6.00 0.50 7.7% 0.50 7.7%DT DB 4 N.A. Longitudinal BHD lower part S20 6.50 5.20 6.10 6.00 0.40 6.2% 0.50 7.7%DT DB 4 N.A. Floor flange C S20 6.50 4.88 4.70 10.30 1.80 27.7% 0.00 0.0% To be renewed
DBT 4 CT N.A. Inner bottom longitudinal 1 S20 8.00 6.00 7.80 8.20 0.20 2.5% 0.00 0.0%DBT 4 CT N.A. Inner bottom longitudinal 2 S20 8.00 6.00 8.20 7.90 0.00 0.0% 0.10 1.3%DT DB 4 N.A. Inner bottom longitudinal 4 S20 8.00 6.00 8.10 8.00 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Inner bottom longitudinal 5 S20 8.00 6.00 8.30 8.10 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Inner bottom longitudinal 6 S20 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%
DBT 4 CT N.A. Bottom longitudinal 1 S20 7.00 5.25 7.20 7.20 0.00 0.0% 0.00 0.0%DBT 4 CT N.A. Bottom longitudinal 2 S20 7.00 5.25 7.70 6.70 0.00 0.0% 0.30 4.3%DT DB 4 N.A. Bottom longitudinal 4 S20 7.00 5.25 7.90 7.40 0.00 0.0% 0.00 0.0%DT DB 4 N.A. Bottom longitudinal 5 S20 7.00 5.25 7.40 6.70 0.00 0.0% 0.30 4.3%DT DB 4 N.A. Bottom longitudinal 6 S20 7.00 5.25 7.40 7.50 0.00 0.0% 0.00 0.0%
N.A. - -N.A. FR.40 - -N.A. - -
DT DB 3 N.A. Plate A S21 6.50 5.20 6.50 6.50 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 6.50 6.50 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 8.20 0.00 0.0% 0.00 0.0%
Operator's Signature: Internal structures Page 45
![Page 53: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/53.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
DT DB 3 N.A. Plate A S21 6.50 5.20 8.50 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 8.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 6.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 6.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 6.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 6.80 - 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 6.80 - 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 9.10 - 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 9.10 - 0.00 0.0%DT DB 3 N.A. Plate B S21 6.50 5.20 6.40 6.40 0.10 1.5% 0.10 1.5%DT DB 3 N.A. Plate B S21 6.50 5.20 6.40 6.40 0.10 1.5% 0.10 1.5%DT DB 3 N.A. Plate B S21 6.50 5.20 7.30 7.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate B S21 6.50 5.20 7.30 7.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Stiffener 1 S21 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Stiffener 2 S21 8.00 6.00 8.10 8.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Stiffener 3 S21 8.00 6.00 8.00 7.10 0.00 0.0% 0.90 11.3%DT DB 3 N.A. Stiffener 4 S21 8.00 6.00 8.20 8.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Stiffener 5 S21 8.00 6.00 8.00 7.80 0.00 0.0% 0.20 2.5%DT DB 3 N.A. Stiffener 6 S21 8.00 6.00 8.00 7.70 0.00 0.0% 0.30 3.8%DT DB 3 N.A. CL girder CL S21 8.00 6.40 7.90 0.10 1.3% -DT DB 3 N.A. CL girder CL S21 8.00 6.40 7.90 0.10 1.3% -DT DB 3 N.A. Longitudinal BHD lower part S21 6.50 5.20 6.50 6.90 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Longitudinal BHD lower part S21 6.50 5.20 6.50 6.90 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 1 S21 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 2 S21 8.00 6.00 8.00 8.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 3 S21 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 4 S21 8.00 6.00 7.90 8.00 0.10 1.3% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 5 S21 8.00 6.00 7.90 8.20 0.10 1.3% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 6 S21 8.00 6.00 8.10 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 1 S21 7.00 5.25 8.30 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 2 S21 7.00 5.25 8.30 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 3 S21 7.00 5.25 8.20 8.50 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 4 S21 7.00 5.25 8.20 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 5 S21 7.00 5.25 8.10 8.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 6 S21 7.00 5.25 8.30 8.90 0.00 0.0% 0.00 0.0%
N.A. - -N.A. FR.52 - -N.A. - -
DT DB 3 N.A. Plate A S21 6.50 5.20 6.70 7.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 6.70 7.10 0.00 0.0% 0.00 0.0%
Operator's Signature: Internal structures Page 46
![Page 54: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/54.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.20 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 7.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 7.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 6.80 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.40 6.70 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 6.80 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 0.00 0.0% -DT DB 3 N.A. Plate A S21 6.50 5.20 8.30 0.00 0.0% -DT DB 3 N.A. Plate B S21 6.50 5.20 6.30 6.40 0.20 3.1% 0.10 1.5%DT DB 3 N.A. Plate B S21 6.50 5.20 6.30 6.40 0.20 3.1% 0.10 1.5%DT DB 3 N.A. Plate B S21 6.50 5.20 6.20 7.20 0.30 4.6% 0.00 0.0%DT DB 3 N.A. Plate B S21 6.50 5.20 7.10 - 0.00 0.0%DT DB 3 N.A. Stiffener 1 S21 8.00 6.00 8.20 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Stiffener 2 S21 8.00 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Stiffener 3 S21 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Stiffener 4 S21 8.00 6.00 7.90 7.90 0.10 1.3% 0.10 1.3%DT DB 3 N.A. Stiffener 5 S21 8.00 6.00 7.90 7.80 0.10 1.3% 0.20 2.5%DT DB 3 N.A. Stiffener 6 S21 8.00 6.00 7.90 7.60 0.10 1.3% 0.40 5.0%DT DB 3 N.A. CL girder CL S21 8.00 6.40 7.80 0.20 2.5% -DT DB 3 N.A. CL girder CL S21 8.00 6.40 7.80 0.20 2.5% -DT DB 3 N.A. Longitudinal BHD lower part S21 6.50 5.20 6.20 6.00 0.30 4.6% 0.50 7.7%DT DB 3 N.A. Longitudinal BHD lower part S21 6.50 5.20 6.20 6.00 0.30 4.6% 0.50 7.7%DT DB 3 N.A. Inner bottom longitudinal 1 S21 8.00 6.00 7.90 8.30 0.10 1.3% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 2 S21 8.00 6.00 7.80 7.90 0.20 2.5% 0.10 1.3%DT DB 3 N.A. Inner bottom longitudinal 3 S21 8.00 6.00 8.30 8.10 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 4 S21 8.00 6.00 7.80 8.00 0.20 2.5% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 5 S21 8.00 6.00 7.80 8.30 0.20 2.5% 0.00 0.0%DT DB 3 N.A. Inner bottom longitudinal 6 S21 8.00 6.00 8.10 7.80 0.00 0.0% 0.20 2.5%DT DB 3 N.A. Bottom longitudinal 1 S21 7.00 5.25 8.30 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 2 S21 7.00 5.25 8.40 8.30 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 3 S21 7.00 5.25 8.30 8.40 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 4 S21 7.00 5.25 8.30 8.20 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 5 S21 7.00 5.25 8.20 8.00 0.00 0.0% 0.00 0.0%DT DB 3 N.A. Bottom longitudinal 6 S21 7.00 5.25 7.80 7.60 0.00 0.0% 0.00 0.0%
N.A. - -N.A. FR.60 - -N.A. - -
Operator's Signature: Internal structures Page 47
![Page 55: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/55.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
DT DB 2 N.A. Plate A S22 6.50 5.20 6.80 7.20 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate A S22 6.50 5.20 6.70 7.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate A S22 6.50 5.20 7.00 - 0.00 0.0%DT DB 2 N.A. Plate A S22 6.50 5.20 6.80 - 0.00 0.0%DT DB 2 N.A. Plate B S22 6.50 5.20 6.70 7.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate B S22 6.50 5.20 6.80 6.90 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate C S22 6.50 5.20 6.80 7.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate C S22 6.50 5.20 7.00 7.00 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate C S22 6.50 5.20 7.00 - 0.00 0.0%DT DB 2 N.A. Plate C S22 6.50 5.20 7.00 - 0.00 0.0%DT DB 2 N.A. Plate D S22 6.50 5.20 6.90 7.00 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate D S22 6.50 5.20 7.00 - 0.00 0.0%DT DB 2 N.A. Plate D S22 6.50 5.20 8.20 - 0.00 0.0%DT DB 2 N.A. Plate D S22 6.50 5.20 8.20 - 0.00 0.0%DT DB 2 N.A. Plate E S22 6.50 5.20 6.20 6.50 0.30 4.6% 0.00 0.0%DT DB 2 N.A. Plate E S22 6.50 5.20 6.20 6.50 0.30 4.6% 0.00 0.0%DT DB 2 N.A. Side shell frame web F S22 6.50 5.20 6.70 6.40 0.00 0.0% 0.10 1.5%DT DB 2 N.A. Side shell frame web F S22 6.50 5.20 6.70 6.50 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side shell frame web F S22 6.50 5.20 8.30 0.00 0.0% -DT DB 2 N.A. Side shell frame web F S22 6.50 5.20 8.20 0.00 0.0% -DT DB 2 N.A. Side shell frame flange F S22 6.50 5.20 7.80 8.00 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side shell frame flange F S22 6.50 5.20 10.10 8.00 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Upper flatbar S22 7.00 5.25 6.70 6.50 0.30 4.3% 0.50 7.1%DT DB 2 N.A. Longitudinal BHD frame G S22 7.00 5.60 7.80 6.60 0.00 0.0% 0.40 5.7%DT DB 2 N.A. Stiffener 1 S22 8.00 6.00 10.00 10.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Stiffener 2 S22 8.00 6.00 10.10 10.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Stiffener 3 S22 8.00 6.00 10.10 10.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. CL girder CL S22 8.00 6.40 8.00 0.00 0.0% -DT DB 2 N.A. CL girder CL S22 8.00 6.40 8.00 0.00 0.0% -DT DB 2 N.A. Side girder GRD1 S22 6.50 5.20 6.30 6.80 0.20 3.1% 0.00 0.0%DT DB 2 N.A. Side girder GRD1 S22 6.50 5.20 6.30 6.80 0.20 3.1% 0.00 0.0%DT DB 2 N.A. Side girder GRD2 S22 6.50 5.20 6.90 7.30 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side girder GRD2 S22 6.50 5.20 6.80 7.30 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side girder GRD3 S22 6.50 5.20 6.50 7.40 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side girder GRD3 S22 6.50 5.20 6.50 7.40 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Longitudinal BHD lower part S22 6.50 5.20 6.70 6.50 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Longitudinal BHD lower part S22 6.50 5.20 6.70 6.50 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Floor flange E S22 6.50 4.88 4.50 6.20 2.00 30.8% 0.30 4.6% To be renewedDT DB 2 N.A. Inner bottom longitudinal 1 S22 8.00 6.00 8.00 7.90 0.00 0.0% 0.10 1.3%DT DB 2 N.A. Inner bottom longitudinal 2 S22 8.00 6.00 8.30 8.30 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Inner bottom longitudinal 3 S22 8.00 6.00 8.00 8.30 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Bottom longitudinal 1 S22 7.00 5.25 6.70 7.10 0.30 4.3% 0.00 0.0%DT DB 2 N.A. Bottom longitudinal 2 S22 7.00 5.25 6.60 8.00 0.40 5.7% 0.00 0.0%
Operator's Signature: Internal structures Page 48
![Page 56: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/56.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
DT DB 2 N.A. Bottom longitudinal 3 S22 7.00 5.25 6.00 7.60 1.00 14.3% 0.00 0.0%N.A. - -N.A. FR.64 - -N.A. - -
DT DB 2 N.A. Plate A S22 6.50 5.20 6.50 6.50 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate A S22 6.50 5.20 6.70 6.60 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate A S22 6.50 5.20 6.80 6.50 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate A S22 6.50 5.20 6.60 - 0.00 0.0%DT DB 2 N.A. Plate B S22 6.50 5.20 6.70 6.70 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate B S22 6.50 5.20 6.50 6.70 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate B S22 6.50 5.20 6.70 - 0.00 0.0%DT DB 2 N.A. Plate B S22 6.50 5.20 6.60 - 0.00 0.0%DT DB 2 N.A. Plate C S22 6.50 5.20 6.40 6.30 0.10 1.5% 0.20 3.1%DT DB 2 N.A. Plate C S22 6.50 5.20 6.50 6.40 0.00 0.0% 0.10 1.5%DT DB 2 N.A. Plate C S22 6.50 5.20 6.30 - 0.20 3.1%DT DB 2 N.A. Plate C S22 6.50 5.20 6.40 - 0.10 1.5%DT DB 2 N.A. Plate D S22 6.50 5.20 6.30 6.80 0.20 3.1% 0.00 0.0%DT DB 2 N.A. Plate D S22 6.50 5.20 6.40 0.10 1.5% -DT DB 2 N.A. Plate E S22 6.50 5.20 6.30 6.50 0.20 3.1% 0.00 0.0%DT DB 2 N.A. Plate F S22 6.50 5.20 6.60 6.50 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate F S22 6.50 5.20 6.60 6.40 0.00 0.0% 0.10 1.5%DT DB 2 N.A. Plate F S22 6.50 5.20 6.50 6.50 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Plate F S22 6.50 5.20 6.60 0.00 0.0% -DT DB 2 N.A. Bracket 1 S22 6.50 4.88 6.20 6.30 0.30 4.6% 0.20 3.1%DT DB 2 N.A. Bracket 2 S22 6.50 4.88 6.30 6.40 0.20 3.1% 0.10 1.5%DT DB 2 N.A. Bracket 3 S22 6.50 4.88 6.20 6.20 0.30 4.6% 0.30 4.6%DT DB 2 N.A. CL girder CL S22 8.00 6.40 7.90 0.10 1.3% -DT DB 2 N.A. CL girder CL S22 8.00 6.40 8.00 0.00 0.0% -DT DB 2 N.A. Side girder GRD1 S22 6.50 5.20 6.30 6.70 0.20 3.1% 0.00 0.0%DT DB 2 N.A. Side girder GRD1 S22 6.50 5.20 6.30 6.70 0.20 3.1% 0.00 0.0%DT DB 2 N.A. Side girder GRD2 S22 6.50 5.20 6.80 7.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side girder GRD2 S22 6.50 5.20 6.90 7.10 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side girder GRD3 S22 6.50 5.20 6.50 7.40 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Side girder GRD3 S22 6.50 5.20 6.50 7.30 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Longitudinal BHD lower part S22 6.50 5.20 6.50 6.60 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Longitudinal BHD lower part S22 6.50 5.20 6.50 6.60 0.00 0.0% 0.00 0.0%DT DB 2 N.A. Floor flange E S22 6.50 4.88 6.30 6.50 0.20 3.1% 0.00 0.0%
N.A. - -N.A. FR.74 - -N.A. - -
DBT 1 N.A. Plate A S23 6.50 5.20 6.30 6.10 0.20 3.1% 0.40 6.2%DBT 1 N.A. Plate A S23 6.50 5.20 6.00 6.00 0.50 7.7% 0.50 7.7%DBT 1 N.A. Plate A S23 6.50 5.20 6.50 5.80 0.00 0.0% 0.70 10.8%
Operator's Signature: Internal structures Page 49
![Page 57: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/57.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Comments, Defects foundPort Starboard
RenewedShip's Name: Report No:
Tank / Space
GaugedTank/Space
Reverse side Structural Element Element /Frame No. Draw ref.
Orig thk. Classmin thk.
Diminution
DBT 1 N.A. Plate A S23 6.50 5.20 6.40 5.80 0.10 1.5% 0.70 10.8%DBT 1 N.A. Plate B S23 6.50 5.20 5.60 6.10 0.90 13.8% 0.40 6.2%DBT 1 N.A. Plate B S23 6.50 5.20 5.60 6.00 0.90 13.8% 0.50 7.7%DBT 1 N.A. Plate B S23 6.50 5.20 5.60 5.80 0.90 13.8% 0.70 10.8%DBT 1 N.A. Plate B S23 6.50 5.20 6.00 6.80 0.50 7.7% 0.00 0.0%DBT 1 N.A. Plate B S23 6.50 5.20 5.70 6.10 0.80 12.3% 0.40 6.2%DBT 1 N.A. Plate B S23 6.50 5.20 6.10 6.00 0.40 6.2% 0.50 7.7%DBT 1 N.A. Plate B S23 6.50 5.20 5.60 6.10 0.90 13.8% 0.40 6.2%DBT 1 N.A. Plate B S23 6.50 5.20 5.90 0.60 9.2% -DBT 1 N.A. Stiffener 2 S23 8.00 6.00 6.60 6.80 1.40 17.5% 1.20 15.0%DBT 1 N.A. Stiffener a S23 8.00 6.00 7.30 7.20 0.70 8.8% 0.80 10.0%DBT 1 N.A. Stiffener b S23 8.00 6.00 7.60 7.80 0.40 5.0% 0.20 2.5%DBT 1 N.A. CL girder CL S23 8.00 6.40 7.80 0.20 2.5% -DBT 1 N.A. CL girder CL S23 8.00 6.40 7.70 0.30 3.8% -DBT 1 N.A. Side girder GRD1 S23 6.50 5.20 6.50 7.10 0.00 0.0% 0.00 0.0%DBT 1 N.A. Side girder GRD1 S23 6.50 5.20 6.50 7.10 0.00 0.0% 0.00 0.0%DBT 1 N.A. Side girder GRD2 S23 6.50 5.20 5.80 6.70 0.70 10.8% 0.00 0.0%DBT 1 N.A. Inner bottom longitudinal 1 S22 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%DBT 1 N.A. Inner bottom longitudinal 2 S22 8.00 6.00 8.50 8.20 0.00 0.0% 0.00 0.0%DBT 1 N.A. Bottom longitudinal 1 S22 7.00 5.25 7.60 7.40 0.00 0.0% 0.00 0.0%DBT 1 N.A. Bottom longitudinal 2 S22 7.00 5.25 7.50 7.00 0.00 0.0% 0.00 0.0%
N.A. - -N.A. FR.76 - -N.A. - -
DBT 1 N.A. Plate A S23 6.50 5.20 5.70 6.60 0.80 12.3% 0.00 0.0%DBT 1 N.A. Plate A S23 6.50 5.20 5.70 6.40 0.80 12.3% 0.10 1.5%DBT 1 N.A. Plate A S23 6.50 5.20 5.80 6.20 0.70 10.8% 0.30 4.6%DBT 1 N.A. Plate A S23 6.50 5.20 5.60 6.70 0.90 13.8% 0.00 0.0%DBT 1 N.A. Plate B S23 6.50 5.20 6.20 6.00 0.30 4.6% 0.50 7.7%DBT 1 N.A. Plate B S23 6.50 5.20 6.00 6.00 0.50 7.7% 0.50 7.7%DBT 1 N.A. Plate B S23 6.50 5.20 6.20 5.70 0.30 4.6% 0.80 12.3%DBT 1 N.A. Plate B S23 6.50 5.20 6.10 5.70 0.40 6.2% 0.80 12.3%DBT 1 N.A. Bracket 2 S23 6.50 4.88 6.90 6.60 0.00 0.0% 0.00 0.0%DBT 1 N.A. Bracket 2 S23 6.50 4.88 6.80 6.70 0.00 0.0% 0.00 0.0%DBT 1 N.A. Stiffener a S23 8.00 6.00 7.50 7.30 0.50 6.3% 0.70 8.8%DBT 1 N.A. Stiffener b S23 8.00 6.00 7.40 7.20 0.60 7.5% 0.80 10.0%DBT 1 N.A. CL girder CL S23 8.00 6.40 7.50 0.50 6.3% -DBT 1 N.A. CL girder CL S23 8.00 6.40 7.60 0.40 5.0% -DBT 1 N.A. Side girder GRD1 S23 6.50 5.20 6.40 7.20 0.10 1.5% 0.00 0.0%DBT 1 N.A. Side girder GRD1 S23 6.50 5.20 6.50 7.20 0.00 0.0% 0.00 0.0%DBT 1 N.A. Inner bottom longitudinal 1 S22 8.00 6.00 8.20 8.10 0.00 0.0% 0.00 0.0%DBT 1 N.A. Bottom longitudinal 1 S22 7.00 5.25 8.00 7.40 0.00 0.0% 0.00 0.0%
Operator's Signature: Internal structures Page 50
![Page 58: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/58.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
FR.32 - -- -
N.A. N.A. Hatch coaming plate HC1 S10 15.00 12.00 15.00 15.20 0.00 0.0% 0.00 0.0%N.A. N.A. Hatch coaming flange HC2 S10 10.00 7.50 10.20 10.70 0.00 0.0% 0.00 0.0%N.A. Cargo hold Longitudinal BHD plate LB4 S10 30.00 24.00 30.50 30.60 0.00 0.0% 0.00 0.0%N.A. Cargo hold Longitudinal BHD plate LB3 S10 11.00 8.80 10.80 10.80 0.20 1.8% 0.20 1.8%N.A. Upper tank Longitudinal BHD plate LB2 S10 6.50 5.20 6.60 6.60 0.00 0.0% 0.00 0.0%N.A. DB DT 4 Longitudinal BHD plate LB1 S10 6.50 5.20 6.30 6.40 0.20 3.1% 0.10 1.5%N.A. Upper tank Main deck plate MD S10 8.00 6.40 7.60 7.50 0.40 5.0% 0.50 6.3%
Upper tank N.A. Main deck longitudinal a S10 7.00 5.25 6.80 7.00 0.20 2.9% 0.00 0.0%Upper tank N.A. Main deck longitudinal b S10 7.00 5.25 6.70 6.70 0.30 4.3% 0.30 4.3%Upper tank N.A. Main deck longitudinal c S10 7.00 5.25 6.10 6.20 0.90 12.9% 0.80 11.4%Upper tank N.A. Longitudinal BHD longitudinal d S10 7.00 5.25 7.10 7.20 0.00 0.0% 0.00 0.0%
N.A. Upper tank Sheer strake F S10 8.00 6.40 8.00 8.30 0.00 0.0% 0.00 0.0%DB DT 4 CT Cargo hold Inner bottom plating IB, CL-1 S10 11.00 8.80 9.60 9.60 1.40 12.7% 1.40 12.7%DB DT 4 CT Cargo hold Inner bottom plating IB, 1-2 S10 11.00 8.80 10.00 9.90 1.00 9.1% 1.10 10.0%DB DT 4 CT Cargo hold Inner bottom plating IB, 2-3 S10 11.00 8.80 9.60 10.30 1.40 12.7% 0.70 6.4%
DB DT 4 Cargo hold Inner bottom plating IB, 3-4 S10 11.00 8.80 10.00 10.10 1.00 9.1% 0.90 8.2%DB DT 4 Cargo hold Inner bottom plating IB, 4-5 S10 11.00 8.80 10.40 10.40 0.60 5.5% 0.60 5.5%DB DT 4 Cargo hold Inner bottom plating IB, 5-6 S10 11.00 8.80 10.30 10.20 0.70 6.4% 0.80 7.3%DB DT 4 Cargo hold Inner bottom plating IB, 6-LB1 S10 11.00 8.80 10.10 10.40 0.90 8.2% 0.60 5.5%
DB DT 4 CT N.A. Inner bottom longitudinal 1 S10 8.00 6.00 7.80 8.20 0.20 2.5% 0.00 0.0%DB DT 4 CT N.A. Inner bottom longitudinal 2 S10 8.00 6.00 8.20 7.90 0.00 0.0% 0.10 1.3%
DB DT 4 N.A. Inner bottom longitudinal 4 S10 8.00 6.00 8.10 8.00 0.00 0.0% 0.00 0.0%DB DT 4 N.A. Inner bottom longitudinal 5 S10 8.00 6.00 8.30 8.10 0.00 0.0% 0.00 0.0%DB DT 4 N.A. Inner bottom longitudinal 6 S10 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%
DB DT 4 CT N.A. Bottom girder GRD S10 8.00 6.40 8.10 0.00 0.0% -DB DT 4 CT DB DT 4 Bottom girder GRD1 S10 6.50 5.20 10.10 10.20 0.00 0.0% 0.00 0.0%DB DT 4 CT N.A. Keel plate Fk S10 8.50 6.80 8.00 8.30 0.50 5.9% 0.20 2.4%DB DT 4 CT N.A. Bottom plate A S10 7.50 6.00 7.80 8.00 0.00 0.0% 0.00 0.0%
DB DT 4 N.A. Bottom plate B S10 7.50 6.00 7.50 8.10 0.00 0.0% 0.00 0.0%DB DT 4 N.A. Bilge plate C S10 8.00 6.40 8.00 8.20 0.00 0.0% 0.00 0.0%DB DT 4 N.A. Side shell plate D S10 8.00 6.40 7.80 7.90 0.20 2.5% 0.10 1.3%
DB DT 4 CT N.A. Bottom longitudinal 1 S10 7.00 5.25 7.20 7.20 0.00 0.0% 0.00 0.0%DB DT 4 CT N.A. Bottom longitudinal 2 S10 7.00 5.25 7.70 6.70 0.00 0.0% 0.30 4.3%
DB DT 4 N.A. Bottom longitudinal 4 S10 7.00 5.25 7.90 7.40 0.00 0.0% 0.00 0.0%DB DT 4 N.A. Bottom longitudinal 5 S10 7.00 5.25 7.40 6.70 0.00 0.0% 0.30 4.3%DB DT 4 N.A. Bottom longitudinal 6 S10 7.00 5.25 7.40 7.50 0.00 0.0% 0.00 0.0%
DB DT 4 CT DB DT 4 Side shell stringer plate STR S10 6.50 5.20 5.80 6.00 0.70 10.8% 0.50 7.7%- -
FR.36 - -- -
N.A. N.A. Hatch coaming plate HC1 S11 15.00 12.00 15.50 14.60 0.00 0.0% 0.40 2.7%N.A. N.A. Hatch coaming flange HC2 S11 10.00 7.50 10.00 9.60 0.00 0.0% 0.40 4.0%
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
Operator's Signature: Transverse sections Page 51
![Page 59: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/59.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. Cargo hold Longitudinal BHD plate LB4 S11 30.00 24.00 30.70 29.50 0.00 0.0% 0.50 1.7%N.A. Cargo hold Longitudinal BHD plate LB3 S11 11.00 8.80 10.60 10.70 0.40 3.6% 0.30 2.7%N.A. Upper tank Longitudinal BHD plate LB2 S11 6.50 5.20 6.60 6.20 0.00 0.0% 0.30 4.6%N.A. DB DT 3 Longitudinal BHD plate LB1 S11 6.50 5.20 6.50 6.30 0.00 0.0% 0.20 3.1%N.A. Upper tank Main deck plate MD S11 8.00 6.40 8.40 8.10 0.00 0.0% 0.00 0.0%
Upper tank N.A. Main deck longitudinal a S11 7.00 5.25 6.70 6.00 0.30 4.3% 1.00 14.3%Upper tank N.A. Main deck longitudinal b S11 7.00 5.25 6.70 6.00 0.30 4.3% 1.00 14.3%Upper tank N.A. Main deck longitudinal c S11 7.00 5.25 6.70 5.70 0.30 4.3% 1.30 18.6%
N.A. N.A. Longitudinal BHD longitudinal d S11 7.00 5.25 7.00 7.10 0.00 0.0% 0.00 0.0%N.A. Upper tank Sheer strake F S11 8.00 6.40 8.10 8.10 0.00 0.0% 0.00 0.0%
DB DT 3 Cargo hold Inner bottom plating IB, CL-1 S11 11.00 8.80 9.60 9.60 1.40 12.7% 1.40 12.7%DB DT 3 Cargo hold Inner bottom plating IB, 1-2 S11 11.00 8.80 10.50 9.60 0.50 4.5% 1.40 12.7%DB DT 3 Cargo hold Inner bottom plating IB, 2-3 S11 11.00 8.80 9.60 10.10 1.40 12.7% 0.90 8.2%DB DT 3 Cargo hold Inner bottom plating IB, 3-4 S11 11.00 8.80 10.50 9.90 0.50 4.5% 1.10 10.0%DB DT 3 Cargo hold Inner bottom plating IB, 4-5 S11 11.00 8.80 10.50 10.40 0.50 4.5% 0.60 5.5%DB DT 3 Cargo hold Inner bottom plating IB, 5-6 S11 11.00 8.80 10.00 10.40 1.00 9.1% 0.60 5.5%DB DT 3 Cargo hold Inner bottom plating IB, 6-LB1 S11 11.00 8.80 10.40 10.50 0.60 5.5% 0.50 4.5%DB DT 3 N.A. Inner bottom longitudinal 1 S11 8.00 6.00 8.00 8.40 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 2 S11 8.00 6.00 8.00 8.10 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 3 S11 8.00 6.00 7.80 7.90 0.20 2.5% 0.10 1.3%DB DT 3 N.A. Inner bottom longitudinal 4 S11 8.00 6.00 7.90 8.00 0.10 1.3% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 5 S11 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 6 S11 8.00 6.00 8.20 8.20 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom girder GRD S11 8.00 6.40 9.10 0.00 0.0% -DB DT 3 N.A. Keel plate Fk S11 8.50 6.80 10.30 10.40 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom plate A S11 7.50 6.00 7.90 8.20 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom plate B S11 7.50 6.00 8.00 7.80 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bilge plate C S11 8.00 6.40 8.00 8.20 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Side shell plate D S11 8.00 6.40 7.90 7.80 0.10 1.3% 0.20 2.5%DB DT 3 N.A. Bottom longitudinal 1 S11 7.00 5.25 8.30 8.30 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 2 S11 7.00 5.25 7.90 8.40 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 3 S11 7.00 5.25 8.20 8.30 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 4 S11 7.00 5.25 8.00 8.30 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 5 S11 7.00 5.25 8.20 8.70 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 6 S11 7.00 5.25 8.00 7.70 0.00 0.0% 0.00 0.0%
Upper tank DB DT 3 Side shell stringer plate STR S11 6.50 5.20 6.30 6.50 0.20 3.1% 0.00 0.0%- -
FR.56 - -- -
N.A. N.A. Hatch coaming plate HC1 S11 15.00 12.00 15.10 15.10 0.00 0.0% 0.00 0.0%N.A. N.A. Hatch coaming flange HC2 S11 10.00 7.50 9.70 10.30 0.30 3.0% 0.00 0.0%N.A. Cargo hold Longitudinal BHD plate LB4 S11 30.00 24.00 29.70 30.50 0.30 1.0% 0.00 0.0%N.A. Cargo hold Longitudinal BHD plate LB3 S11 11.00 8.80 10.80 11.10 0.20 1.8% 0.00 0.0%
Operator's Signature: Transverse sections Page 52
![Page 60: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/60.jpg)
THICKNESS MEASUREMENT REPORTSubstantial corr
xxxxxxx Id.No: - xxxxxxx Legend: Below class min
Port Stbd Port Stbdmm mm mm mm mm % mm % mm mm
Tank/Space Reverse side
Comments, Defects foundPort Starboard
RenewedShip's Name:
Tank / Space
GaugedOrig thk.
Report No:
Structural Element Element /Frame No. Draw ref.
Class min thk.
Diminution
N.A. Upper tank Longitudinal BHD plate LB2 S11 6.50 5.20 6.40 6.40 0.10 1.5% 0.10 1.5%N.A. DB DT 3 Longitudinal BHD plate LB1 S11 6.50 5.20 6.40 6.30 0.10 1.5% 0.20 3.1%N.A. Upper tank Main deck plate MD S11 8.00 6.40 8.00 8.00 0.00 0.0% 0.00 0.0%
Upper tank N.A. Main deck longitudinal a S11 7.00 5.25 6.80 5.70 0.20 2.9% 1.30 18.6%Upper tank N.A. Main deck longitudinal b S11 7.00 5.25 7.10 5.70 0.00 0.0% 1.30 18.6%Upper tank N.A. Main deck longitudinal c S11 7.00 5.25 7.10 5.70 0.00 0.0% 1.30 18.6%
N.A. N.A. Longitudinal BHD longitudinal d S11 7.00 5.25 7.00 7.30 0.00 0.0% 0.00 0.0%N.A. Upper tank Sheer strake F S11 8.00 6.40 8.10 8.00 0.00 0.0% 0.00 0.0%
DB DT 3 Cargo hold Inner bottom plating IB, CL-1 S11 11.00 8.80 10.50 10.60 0.50 4.5% 0.40 3.6%DB DT 3 Cargo hold Inner bottom plating IB, 1-2 S11 11.00 8.80 10.60 10.40 0.40 3.6% 0.60 5.5%DB DT 3 Cargo hold Inner bottom plating IB, 2-3 S11 11.00 8.80 10.60 10.40 0.40 3.6% 0.60 5.5%DB DT 3 Cargo hold Inner bottom plating IB, 3-4 S11 11.00 8.80 10.40 10.20 0.60 5.5% 0.80 7.3%DB DT 3 Cargo hold Inner bottom plating IB, 4-5 S11 11.00 8.80 10.20 10.50 0.80 7.3% 0.50 4.5%DB DT 3 Cargo hold Inner bottom plating IB, 5-6 S11 11.00 8.80 10.40 9.60 0.60 5.5% 1.40 12.7%DB DT 3 Cargo hold Inner bottom plating IB, 6-LB1 S11 11.00 8.80 10.40 10.20 0.60 5.5% 0.80 7.3%DB DT 3 N.A. Inner bottom longitudinal 1 S11 8.00 6.00 7.80 8.10 0.20 2.5% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 2 S11 8.00 6.00 7.80 7.90 0.20 2.5% 0.10 1.3%DB DT 3 N.A. Inner bottom longitudinal 3 S11 8.00 6.00 8.40 8.10 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 4 S11 8.00 6.00 7.80 8.00 0.20 2.5% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 5 S11 8.00 6.00 7.90 8.30 0.10 1.3% 0.00 0.0%DB DT 3 N.A. Inner bottom longitudinal 6 S11 8.00 6.00 8.20 7.80 0.00 0.0% 0.20 2.5%DB DT 3 N.A. Bottom girder GRD S11 8.00 6.40 8.10 0.00 0.0% -DB DT 3 N.A. Keel plate Fk S11 8.50 6.80 9.00 8.90 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom plate A S11 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom plate B S11 7.50 6.00 8.00 8.00 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bilge plate C S11 8.00 6.40 7.90 8.10 0.10 1.3% 0.00 0.0%DB DT 3 N.A. Side shell plate D S11 8.00 6.40 7.90 7.80 0.10 1.3% 0.20 2.5%DB DT 3 N.A. Bottom longitudinal 1 S11 7.00 5.25 7.80 8.00 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 2 S11 7.00 5.25 8.20 7.80 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 3 S11 7.00 5.25 8.20 8.00 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 4 S11 7.00 5.25 8.40 7.70 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 5 S11 7.00 5.25 7.60 8.00 0.00 0.0% 0.00 0.0%DB DT 3 N.A. Bottom longitudinal 6 S11 7.00 5.25 7.80 7.80 0.00 0.0% 0.00 0.0%
Upper tank DB DT 3 Side shell stringer plate STR S11 6.50 5.20 6.60 5.80 0.00 0.0% 0.70 10.8%
Operator's Signature: Transverse sections Page 53
![Page 61: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/61.jpg)
THICKNESS MEASUREMENT REPORT
xxxxxxx Id.No: - xxxxxxx
Measured As-built DiminutionCm2 Cm2 %
Transverse Deck 1209 1218 0.74%Section 1 Bottom 2855 2832 0.00%Transverse Deck 1212 1218 0.49%Section 2 Bottom 2757 2740 0.00%Transverse Deck 1217 1218 0.08%Section 3 Bottom 2739 2740 0.04%
Total deck and bottom cross section area ( plates + long. )
Ship's Name: Report No:
Transverse sectional area of hull girder flange
Operator's Signature: Area reduction table Page 54
![Page 62: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/62.jpg)
![Page 63: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/63.jpg)
![Page 64: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/64.jpg)
![Page 65: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/65.jpg)
![Page 66: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/66.jpg)
![Page 67: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/67.jpg)
![Page 68: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/68.jpg)
![Page 69: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/69.jpg)
![Page 70: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/70.jpg)
![Page 71: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/71.jpg)
![Page 72: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/72.jpg)
![Page 73: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/73.jpg)
![Page 74: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/74.jpg)
![Page 75: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/75.jpg)
![Page 76: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/76.jpg)
![Page 77: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/77.jpg)
![Page 78: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/78.jpg)
![Page 79: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/79.jpg)
![Page 80: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/80.jpg)
![Page 81: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/81.jpg)
![Page 82: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/82.jpg)
![Page 83: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/83.jpg)
![Page 84: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/84.jpg)
![Page 85: Thickness measurement report m/vmk-centras.com/gallery/sample tm report 2-1.pdf · Thickness measurement report m/v " " Report No. Office: Lithuania, Taikos ave 24-218, LT 91222,](https://reader030.vdocuments.us/reader030/viewer/2022040501/5e2271952cc6387cf37baacc/html5/thumbnails/85.jpg)