thickness limit awwa
TRANSCRIPT
-
8/10/2019 Thickness Limit Awwa
1/1
WELDED CARBON STEEL TANKS FOR WATER STORAGE 9
2.2.3.1.4 ASTM A573, grade 58 plates are limited to 11/2 in. (38 mm) in
thickness.
2.2.3.1.5 Where details are such that tension may occur through the plate
thickness, consideration shall be given to the possibility that lamellar tearing may occur.
2.2.3.1.6 ASTM A36 or A283, grade C steels may be used for base plates
regardless of thickness or temperature. A36 steel ordered as a bearing plate in
accordance with ASTM A36, Sec. 5.2, is not acceptable.
Table 1 Thickness limitations and special requirements
Shell Plates:
Plate Thickness (in.)
t1/2 1/2< t1 1 < t11/2 11/2< t2 t> 2
A36 (tension governs) K, FGP
A36 (compression governs) K K, FGP, N, UT
A573, Gr 58
A131, Gr A
A131, Gr B
A283, Gr B, C (tension governs)
A283, Gr B, C (compression governs)
A283, Gr D t3/4
Substitute material from Sec. 14 notlisted above
(tension governs)
(compression governs)
Base Plates:
A36/A283 Gr C
Material may be used without special requirements
K = killed
FGP = fine-grain practice
N = normalized
UT = ultrasonic test