A Computerized Payroll System for the Barangay Dita

1.1 Background of the study

HISTORY OF PAYROLL SYSTEM

A computerized payroll system, the employer invests in a computerized payroll software. Using a software such as quickbooks allows the employer to enter the wages into the system after he has manually calculated them. The payroll and check printing are processed through the system. The employer has access to payroll reports that he/she can print and use to double-check against what she has entered before printing the checks. This allows his/her to correct any detectable errors beforehand. Computerized payroll system allow you to process all your normal payroll task via a computerized system, rather than by hand. Essentials like name, address, Social Security number and withholding rate for each employee are automatically filled in for every pay period until you make an employee’s record inactive. Many different vendors offer computerized payroll system. Like different word processors or other computer programs, they largely offer the same types of features with slightly different interfaces. Payroll is essentially how employees are paid. It’s the legal paperwork involved. There's more to payroll than just handing out cash or checks. However, after gathering data on what the employees did and compared it to their salaries, some simple payday mathematics will let the employer hand out the dough.

1.2 Objectives

1.2.1 General Objective

The main objective of the study is to design and develop a Computerizes Payroll System for Barangay Hall, Dita that fast transactions, minimize the manual checking of employees, monitor the status of employee’s charges, deductions and generate the essential reports. A computerized payroll system must be able to keep and generate accurate reports on employee income. An equally important objective of any payroll system is to generate paychecks and pay stubs. Computerizing this task saves managers and business owners time and money; rather than reviewing time cards manually and calculating a check amount based on the hours worked, the payroll system should be designed to automatically calculate these figures. A computerized payroll system must automatically factor in the overtime pay. This helps employers stay within the law when it comes time to pay overtime. Additionally, since an employer can use the system to check the number of hours an employee works, the employer can shift schedules to avoid paying additional overtime.

1.2.2 Specific Objectives

To minimize the manual checking of each daily time record.

To develop a module that will generate essentials reports. To develop that will monitor the status of employee’s loan and other

deductions such as cash advance and charges.

1.3 Significance of the study

This part of the study discusses about the importance of creating computerized Payroll System. It provides sample discussed how to run a Computerized Payroll System and here are some examples of how it run. Many employers use a timekeeping system, such as clock time, to track work hours employees '. Can separate this system regular hours from overtime hours worked. Payroll all people will do is make edits / adjustments, if necessary. If time employees are imported into the computerized Payroll system, the latter rounds up and down time employees appropriately, as the nearest quarter hour. It calculates the total hours worked and paid. It is saving the time spent manually calculating time and reduces errors. If the person enters Payroll time system itself, automatically calculates its income, based on its input. The system calculates all pay frequencies, such as weekly, biweely, and twice a month. Only people attended Payroll data which the reduction is based, such as form for withholding information federal income tax. Necessary you a manual payroll system to print paychecks on a typewriter or by hand.

A computerized Payroll system has direct deposit capability, which saves money spent on live checks and reconciliation. Moreover, paycheck and pay stub generation occurs rapidly, regardless of the quantity. developing a computerized system and Prints Payroll reports . If you want to double - check before printing Payroll stubs paychecks / pay, just refer to the corresponding report. A computerized payroll system allows hard - copy printing of Payroll registers pertaining to each pay period. Also saves its information systems without boundaries .The system generates reports to ensure compliance with tax Payroll tax. This includes quarterly and annual wage reporting and development of employee forms. If a related departments such as accounting office holding Payroll taxes and reconciliation of the company, print the required reports would require the department through the computerized system. Furthermore, these days, such as vacation and personal time, taken and paid to benefit the track system .

1.4 Scope

The study will covers the process of preparing the pay slip of each employee, monitors loans, cash advances, charges, keeping the records and easily computers the basic pay, regular overtime pay, pay during day off, special and legal holiday pay, gross pay, SSS contributions, PhilHealth contributions, Pag-Ibig contributions, cash advances, charges, deductions, lates, and net pay.

1.5 Delimitation

The study does not cover any other not employee of the Barangay Hall, Dita .This is not a group pay slip. This system is not cover by any deduction that may not belong to the pay slip. And also the other income that not belong in Barangay Hall, Dita .

1.6 Definition of Terms

1.6.1 Operational Terms

Computerized Payroll System- A computerized payroll system has many prominent advantages over paper systems. They prevent clerical error in calculating hours and a gross payment. They also automatically deduct taxes based on the gross payment.

Work Hours- is the period of time that an individual spends at paid occupational labor. Unpaid labors such as personal housework or caring for children/pets are not considered part of the working week.

Overtime hours- is the amount of time someone works beyond normal working hours. Normal hours may be determined in several ways.

Regular Hours- is usually when a store opens and closes.

Total Hours- compute the number of hours you work every week counting overtime and then average these hours over a set period. 

Income Tax- is a government levy (tax) imposed on individuals or entities (taxpayers) that varies with the income or profits (taxable income) of the taxpayer. Details vary widely by jurisdiction. Many jurisdictions refer to income tax on business entities as companies tax or corporation tax.

Deposit- account is a savings account, current account, or other type of bank account, at a banking institution that allows money to be deposited and withdrawn by the account holder.

Paychecks- is traditionally a paper document (a cheque) issued by an employer to pay an employee for services rendered. In recent times, the physical paycheck has been increasingly replaced by electronic to bank accounts. Such employees may still receive a pay slip, but any attached cheque is marked as non-negotiable and cannot be cashed.

Payslip- a slip of paper included with your pay that records how much money you have earned and how much tax or insurance etc. has been taken out.

1.6.2 Technical Terms

Data- is a set of value of qualitative or quantitative variables; restated, data are individual pieces of information. Data in computing or data processing are represented in a structure. Data consists of a series of facts or statements that may have been collected, stored, processed and/or manipulated but have not been organized or placed into context. When data is organized, it becomes information. Information can be processed and used to draw generalized conclusions or knowledge.

1.7 Methodology Used in Developing the Software Product

Data Gathering :Conducting of 5 interview, involving of 30 personnel of the Barangay Hall, Dita to

understand the roles, the procedures, issues, opportunities, and challenges of payroll process.

VB orVisual Basic is a Programming tool that user to develop Windows or GUI(Graphical User Interface) applications. It means that rather than writing numerous line for code to describe the appearance and location for interface elements like C, C++, or Basic. User can simply drag and drop pre-built objects into the form window on computer screen.

VB is a enhanced version of BASIC programming language(NASIC is Predecessor of VB)/ The main difference is that the VB can create windows programs by just Drag & Drop where as BASIC could only create DOS programs or work only in CUI (Command User Interface)

1.8 User’s Manual

Public Class dbSelect Inherits System.Windows.Forms.FormPublic Shared StartUp As dbSelect Private Sub btnNSM_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnNSM.Click Dim Login As New Login

CompDB = "NSM"

Login.Show() Me.Hide() End SubPrivate Sub btnPPE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPPE.Click Dim Login As New Login CompDB = "PPE" Login.Show() Me.Hide() End SubPrivate Sub btnSW_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSW.Click Dim Login As New Login CompDB = "S&W" Login.Show() Me.Hide() End SubPrivate Sub btnSDOM_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSDOM.Click Dim Login As New Login CompDB = "SDOM" Login.Show() Me.Hide() End SubPrivate Sub btnSSN_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSSN.Click Dim Login As New Login CompDB = "SSn" Login.Show() Me.Hide() End SubPrivate Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click Application.Exit() End SubPrivate Sub dbSelect_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load dbSelect.StartUp = Me End SubPrivate Sub Panel1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel1.Paint End Sub Private Sub Panel3_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel3.Paint End SubEnd Class

Public Class Menu Inherits System.Windows.Forms.Form

Private Sub Menu_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load Select Case CompDB Case "NSM" Label2.Text = "Admin" Case "PPE" Label2.Text = "Lupon" Case "S&W" Label2.Text = "Barangay Health Worker" Case "SDOM" Label2.Text = "Barangay Tanod" Case "SSN" Label2.Text = "Security Aide" End Select

End SubPrivate Sub btnQuit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnQuit.Click Me.Close()

End SubPrivate Sub btnCompProfile_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCompProfile.Click Dim Company As New Company Company.Show() End SubPrivate Sub btnEmployees_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnEmployees.Click Dim Employees As New Employees Employees.Show()

End SubPrivate Sub btnPayroll_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPayroll.Click Dim Payroll As New Payroll Payroll.Show()

End SubPrivate Sub btnReports_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnReports.Click

Dim ReportDialog As New ReportDialog ReportDialog.Show() End SubPrivate Sub btnSecurity_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSecurity.Click Dim Password As New Password Password.Show()

End SubPrivate Sub btnAbout_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAbout.Click Dim About As New About About.ShowDialog() End SubPrivate Sub Menu_Closed(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Closed dbSelect.StartUp.Show()

End SubPrivate Sub Panel1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel1.Paint End SubPrivate Sub Label5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label5.Click End SubEnd Class

Public Class Company Inherits System.Windows.Forms.Form

Protected Overrides Function ProcessCmdKey(ByRef msg As System.Windows.Forms.Message, ByVal keyData As System.Windows.Forms.Keys) As Boolean Select Case msg.WParam.ToInt32() Case 13 ' enter Key If TypeOf Me.ActiveControl Is TextBox Then SendKeys.Send("{Tab}") Return True End If End Select Return MyBase.ProcessCmdKey(msg, keyData)

End Function 'ProcessCmdKeyPrivate Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click Me.Close()

End SubPrivate Sub Company_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load cnPayroll.ConnectionString = cnSettings() daCompany.Fill(DsPayroll) Me.BindingContext(DsPayroll, "Company").Position = 0

End Sub Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click Me.BindingContext(DsPayroll, "Company").EndCurrentEdit() daCompany.Update(DsPayroll) End Sub

End Class

Public Class Employees

Inherits System.Windows.Forms.FormDim oldcbDivision As String Protected Overrides Function ProcessCmdKey(ByRef msg As System.Windows.Forms.Message, ByVal keyData As System.Windows.Forms.Keys) As Boolean Select Case msg.WParam.ToInt32() Case 13 ' enter Key If TypeOf Me.ActiveControl Is TextBox Or TypeOf Me.ActiveControl Is ComboBox Then SendKeys.Send("{Tab}") Return True End If End Select Return MyBase.ProcessCmdKey(msg, keyData) End Function 'ProcessCmdKey Private Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click Me.Close() End Sub Private Sub Employees_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load cnPayroll.ConnectionString = cnSettings() daEmployees.Fill(DsPayroll) daDivision.Fill(DsPayroll) With cbStatus .Items.Add("ACTIVE") .Items.Add("RESIGNED") .Items.Add("RETIRED") End With

With cbDivision .DataSource = DsPayroll .DisplayMember = "Division.Division" .ValueMember = "Division.DivisionID" .DataBindings.Add("Tag", DsPayroll.Tables("Employees"), "Division") .DataBindings.Add(New Binding("SelectedValue", _ DsPayroll, "Employees.Division")) End With With cbPayMethod .Items.Add("MONTHLY") .Items.Add("DAILY") End With BindEmpList() Me.BindingContext(DsPayroll, "Employees").Position = 0 AddHandler Me.BindingContext(DsPayroll, "Employees").PositionChanged, _ AddressOf Employee_PositionChanged DisplayNav(sender, e) End Sub Sub BindEmpList() With grdEmpList .CaptionText = "Employees" .DataMember = "Employees" .DataSource = DsPayroll End With ' You must clear out the TableStyles collection before

grdEmpList.TableStyles.Clear()

Dim grdTableStyle1 As New DataGridTableStyle With grdTableStyle1 .MappingName = "Employees" End With Dim grdColStyle1 As New DataGridTextBoxColumn With grdColStyle1 .MappingName = "AssignCode" .HeaderText = "Assign Code" .Width = 140 End With Dim grdColStyle2 As New DataGridTextBoxColumn With grdColStyle2 .MappingName = "LastName" .HeaderText = "Last Name" .Width = 140 End With Dim grdColStyle3 As New DataGridTextBoxColumn With grdColStyle3 .MappingName = "FirstName" .HeaderText = "First Name" .Width = 140 End With Dim grdColStyle4 As New DataGridTextBoxColumn With grdColStyle4 .MappingName = "MiddleName" .HeaderText = "M.I." .Width = 75 End With

Dim grdColStyle5 As New DataGridTextBoxColumn With grdColStyle5 .MappingName = "Section" .HeaderText = "Section" .Width = 75 End With Dim grdColStyle6 As New DataGridTextBoxColumn With grdColStyle6 .MappingName = "DateHired" .HeaderText = "Date Hired" .Width = 75 End With Dim grdColStyle7 As New DataGridTextBoxColumn With grdColStyle7 .MappingName = "Phone" .HeaderText = "Phone" .Width = 75 End With Dim grdColStyle8 As New DataGridTextBoxColumn With grdColStyle8 .MappingName = "Status" .HeaderText = "Status" .Width = 75 End With grdTableStyle1.GridColumnStyles.AddRange _ (New DataGridColumnStyle() {grdColStyle1, grdColStyle2, _

grdColStyle3, grdColStyle4, grdColStyle5, _ grdColStyle6, grdColStyle7, grdColStyle8}) grdEmpList.TableStyles.Add(grdTableStyle1) End Sub Private Sub DisplayNav(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnFirst.Click, btnPrev.Click, btnNext.Click, btnLast.Click, btnDelete.Click 'Update record position when Update & Delete events lblNavLocation.Text = Me.BindingContext(DsPayroll, "Employees").Position + 1 & " of " & Me.BindingContext(DsPayroll, "Employees").Count End Sub Private Sub btnNext_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnNext.Click Save_Record() Me.BindingContext(DsPayroll, "Employees").Position += 1 End Sub Private Sub btnPrev_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPrev.Click Save_Record() Me.BindingContext(DsPayroll, "Employees").Position -= 1 End Sub Private Sub btnLast_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnLast.Click Save_Record() Me.BindingContext(DsPayroll, "Employees").Position = Me.BindingContext(DsPayroll, "Employees").Count - 1 End Sub

Private Sub btnFirst_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnFirst.Click Save_Record() Me.BindingContext(DsPayroll, "Employees").Position = 0 End Sub Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click If btnAdd.Text = "&Add" Then Me.BindingContext(DsPayroll, "Employees").AddNew() Else Me.BindingContext(DsPayroll, "Employees").CancelCurrentEdit() Change_Button(True) btnAdd.Text = "&Add" DisplayNav(sender, e) End If End Sub Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click Try If btnAdd.Text = "&Revert" Then If txtCode.Text = "" Then MessageBox.Show("Please don't leave assign code field blank.", "Error", MessageBoxButtons.OK) Exit Sub End If End If Save_Record() Change_Button(True)

btnAdd.Text = "&Add"

DisplayNav(sender, e) Catch ex As Exception MsgBox(ex.Message) End Try End Sub

Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click Try If MsgBox("Are you sure you want to delete this record?", MsgBoxStyle.YesNo) = MsgBoxResult.No Then Exit Sub

Me.BindingContext(DsPayroll, "Employees").RemoveAt(Me.BindingContext(DsPayroll, "Employees").Position)

Save_Record()

DisplayNav(sender, e) Catch ex As Exception MsgBox(ex.Message) End Try End Sub

Private Sub Save_Record() Try Me.BindingContext(DsPayroll, "Employees").EndCurrentEdit()

daEmployees.Update(DsPayroll) Catch ex As Exception MsgBox(ex.Message) End Try End Sub Private Sub Change_Button(ByVal bval As Boolean) btnFirst.Enabled = bval btnPrev.Enabled = bval btnNext.Enabled = bval btnLast.Enabled = bval btnDelete.Enabled = bval btnExit.Enabled = bval End Sub Private Sub txtDailyRate_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtDailyRate.LostFocus If IsValidTextbox(txtDailyRate) = False Then Exit Sub End Sub Private Sub txtAllowance_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtAllowance.LostFocus If IsValidTextbox(txtAllowance) = False Then Exit Sub End Sub Private Sub txtIncentives_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtIncentives.LostFocus If IsValidTextbox(txtIncentives) = False Then Exit Sub End Sub Private Sub cbDivision_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cbDivision.SelectedIndexChanged oldcbDivision = cbDivision.Text

End Sub Private Sub cbDivision_SelectionChangeCommitted(ByVal sender As Object, ByVal e As System.EventArgs) Handles cbDivision.SelectionChangeCommitted If cbDivision.Text = "Add Division" Then Dim Division As New Division cbDivision.Text = oldcbDivision Division.ShowDialog() daDivision.Fill(DsPayroll) End If End Sub Private Sub Employee_PositionChanged(ByVal sender As Object, ByVal e As System.EventArgs) DisplayNav(sender, e) End Sub Private Sub Label8_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label8.Click End Sub Private Sub lblNavLocation_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lblNavLocation.Click End Sub Private Sub Panel2_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel2.Paint End Sub Private Sub Panel3_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel3.Paint End Sub

Private Sub TabData_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TabData.Click End Sub Private Sub GroupBox2_Enter(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles GroupBox2.Enter End Sub

End Class

Option Explicit On Imports System.Data.OleDbPublic Class Payroll Inherits System.Windows.Forms.Form Dim ACCESS_CONNECTION_STRING As String = cnSettings() Dim strSelectedAssignCode As String Dim dblAllowance As Double Dim dblIncentives As Double Dim intIndex As IntegerProtected Overrides Function ProcessCmdKey(ByRef msg As System.Windows.Forms.Message, ByVal keyData As System.Windows.Forms.Keys) As Boolean Select Case msg.WParam.ToInt32() Case 13 ' enter Key If TypeOf Me.ActiveControl Is TextBox Then SendKeys.Send("{Tab}") Return True End If End Select Return MyBase.ProcessCmdKey(msg, keyData) End Function 'ProcessCmdKeyPrivate Sub Payroll_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load PopulateNameList() End SubPrivate Sub PopulateNameList() Dim Connection As New OleDbConnection(ACCESS_CONNECTION_STRING) lvName.Items.Clear() lvName.Sorting = SortOrder.Ascending

Dim cmdfill As New OleDbCommand("SELECT AssignCode, LastName & ', ' & FirstName & ' ' & MiddleName as Name FROM Employees", Connection) Try Connection.Open() Dim datareader As OleDbDataReader datareader = cmdfill.ExecuteReader While datareader.Read Dim lvi As New ListViewItem lvi.Text = CStr(datareader("AssignCode")) lvi.SubItems.Add(CStr(datareader("Name"))) lvName.Items.Add(lvi) End While If datareader.HasRows Then lvName.TopItem.Selected = True lvName.TopItem.Focused = True lvName.TopItem.EnsureVisible() lvName.Select() 'lvName.Items(0).Selected = True 'strSelectedAssignCode = lvName.Items(0).SubItems(0).Text lvName_SelectedIndexChanged(Nothing, Nothing) End If Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "Error") Finally Connection.Close() End Try End SubPrivate Sub lvName_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lvName.SelectedIndexChanged Dim cnOleDb As OleDbConnection Dim cmSQL As OleDbCommand Dim drSQL As OleDbDataReader Dim strSQL As String 'Dim strID As String Dim ThisItem As ListViewItem If IsNothing(lvName.FocusedItem) Then Exit Sub For Each ThisItem In lvName.SelectedItems strSelectedAssignCode = lvName.Items(ThisItem.Index).SubItems(0).Text Next 'strSelectedAssignCode = lvName.FocusedItem.Text Try strSQL = "SELECT AssignCode, " & _ "DailyRate, " & _ "Allowance, " & _ "Incentives " & _ "FROM Employees " & _ "WHERE AssignCode = '" & strSelectedAssignCode & "'" cnOleDb = New OleDbConnection(ACCESS_CONNECTION_STRING) cnOleDb.Open() cmSQL = New OleDbCommand(strSQL, cnOleDb) drSQL = cmSQL.ExecuteReader() drSQL.Read() txtDailyRate.Text = Format(Convert.ToDouble(drSQL.Item("DailyRate").ToString()), "0.00") dblAllowance = Format(Convert.ToDouble(drSQL.Item("Allowance").ToString()), "0.00")

txtAllowance.Text = dblAllowance dblIncentives = Format(Convert.ToDouble(drSQL.Item("Incentives").ToString()), "0.00") txtIncentives.Text = dblIncentives ' Close and Clean up objects drSQL.Close() cnOleDb.Close() cmSQL.Dispose() cnOleDb.Dispose()

GetPayslip()

txtTotal.Text = Format(txtWorkDays.Text * txtDailyRate.Text, "0.00") Calc_Gross() Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End Sub

Private Sub GetPayslip() Dim cnOleDb As OleDbConnection Dim cmSQL As OleDbCommand Dim drSQL As OleDbDataReader Dim strSQL As String 'Dim strID As String If IsNothing(lvName.FocusedItem) Then Exit Sub 'strSelectedAssignCode = lvName.FocusedItem.Text Try strSQL = "SELECT * " & _ "FROM Payroll " & _ "WHERE AssignCode = '" & strSelectedAssignCode & "' And FromPay = #" & dtpFromPay.Text & "# And ToPay = #" & dtpToPay.Text & "#" cnOleDb = New OleDbConnection(ACCESS_CONNECTION_STRING) cnOleDb.Open() cmSQL = New OleDbCommand(strSQL, cnOleDb) drSQL = cmSQL.ExecuteReader() If drSQL.HasRows Then drSQL.Read() txtWorkDays.Text = drSQL.Item("NoWorkDays").ToString() txtWorkDays.Text = Format(CDbl(txtWorkDays.Text), "0.0000") txtRegOT.Text = Format(CDbl(drSQL.Item("RegOT").ToString()), "0.0000") txtSunOT.Text = Format(CDbl(drSQL.Item("SunOT").ToString()), "0.0000") txtHolPay.Text = Format(Convert.ToDouble(drSQL.Item("HolOT").ToString()), "0.00") txtAdd1.Text = Format(Convert.ToDouble(drSQL.Item("Add1").ToString()), "0.00") txtAdd2.Text = Format(Convert.ToDouble(drSQL.Item("Add2").ToString()), "0.00") txtAdd3.Text = Format(Convert.ToDouble(drSQL.Item("Add3").ToString()), "0.00") txtAddDesc1.Text = drSQL.Item("AddDesc1").ToString() txtAddDesc2.Text = drSQL.Item("AddDesc2").ToString() txtAddDesc3.Text = drSQL.Item("AddDesc3").ToString()

txtSSS.Text = Format(Convert.ToDouble(drSQL.Item("SSS_MCR").ToString()), "0.00") txtTax.Text = Format(Convert.ToDouble(drSQL.Item("WTax").ToString()), "0.00") txtSSSLoan.Text = Format(Convert.ToDouble(drSQL.Item("SSS_Loans").ToString()), "0.00") txtLates.Text = Format(Convert.ToDouble(drSQL.Item("Lates").ToString()), "0.00") txtDed1.Text = Format(Convert.ToDouble(drSQL.Item("Ded1").ToString()), "0.00") txtDed2.Text = Format(Convert.ToDouble(drSQL.Item("Ded2").ToString()), "0.00") txtDed3.Text = Format(Convert.ToDouble(drSQL.Item("Ded3").ToString()), "0.00") txtDedDesc1.Text = drSQL.Item("DedDesc1").ToString() txtDedDesc2.Text = drSQL.Item("DedDesc2").ToString() txtDedDesc3.Text = drSQL.Item("DedDesc3").ToString() ' Close and Clean up objects drSQL.Close() cnOleDb.Close() cmSQL.Dispose() cnOleDb.Dispose() End If txtRegOTTotal.Text = Format(((txtDailyRate.Text / 8) * 1.25) * txtRegOT.Text, "0.00") txtSunOTTotal.Text = Format(((txtDailyRate.Text / 8) * 1.3) * txtSunOT.Text, "0.00") txtHolPayTotal.Text = Format(txtDailyRate.Text * txtHolPay.Text, "0.00") txtIncentives.Text = Format(txtIncentives.Text * txtWorkDays.Text, "0.00") txtAllowance.Text = Format(txtAllowance.Text * txtWorkDays.Text, "0.00") Calc_Gross() Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End SubPrivate Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click Me.Close() End SubPrivate Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click If strSelectedAssignCode = "" Then MsgBox("Please select employee", MsgBoxStyle.OKOnly) Exit Sub End If If txtWorkDays.Text > 0 Then Dim ReturnValue As String = isRecordExist() If ReturnValue = "Exist" Then If MsgBox("Payslip already exist for this employee." & vbCrLf & vbCrLf & "Do you want to overight existing record?", MsgBoxStyle.YesNo) = MsgBoxResult.Yes Then UpdatePaySlip() End If SelectIndex()

lvName_SelectedIndexChanged(sender, e) ElseIf ReturnValue <> "Error" Then AddPaySlip() SelectIndex() lvName_SelectedIndexChanged(sender, e) End If Else MsgBox("Please enter No. of Working days.", MsgBoxStyle.OKOnly) End If End Sub Private Function isRecordExist() As String Dim Connection As New OleDbConnection(ACCESS_CONNECTION_STRING) Dim cmdfill As New OleDbCommand("SELECT AssignCode, FromPay, ToPay FROM Payroll Where AssignCode = '" & strSelectedAssignCode & "' And FromPay = #" & dtpFromPay.Text & "# And ToPay = #" & dtpToPay.Text & "#", Connection) Try Connection.Open() Dim datareader As OleDbDataReader datareader = cmdfill.ExecuteReader If datareader.HasRows Then Return "Exist" Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "Error") Return "Error" Finally Connection.Close() Connection.Dispose() End Try End FunctionPrivate Sub AddPaySlip() Try 'Dim dbCommand As OleDbCommand Dim DBConn As OleDbConnection Dim DBInsert As New OleDbCommand DBConn = New OleDbConnection(ACCESS_CONNECTION_STRING) DBInsert.CommandText = "INSERT INTO Payroll VALUES (" _ & "'" & dtpFromPay.Text & "', " _ & "'" & dtpToPay.Text & "', " _ & "'" & strSelectedAssignCode & "', " _ & "'" & txtWorkDays.Text & "', " _ & "'" & txtDailyRate.Text & "', " _ & "'" & txtTotal.Text & "', " _ & "'" & txtRegOT.Text & "', " _ & "'" & txtSunOT.Text & "', " _ & "'" & txtHolPay.Text & "', " _ & "'" & txtRegOTTotal.Text & "', " _ & "'" & txtSunOTTotal.Text & "', " _ & "'" & txtHolPayTotal.Text & "', " _ & "'" & txtAdd1.Text & "', " _ & "'" & txtAdd2.Text & "', " _ & "'" & txtAdd3.Text & "', " _ & "'" & txtAddDesc1.Text & "', " _ & "'" & txtAddDesc2.Text & "', " _ & "'" & txtAddDesc3.Text & "', " _ & "'" & txtIncentives.Text & "', " _ & "'" & txtAllowance.Text & "', " _ & "'" & txtGross.Text & "', " _ & "'" & txtSSS.Text & "', " _

& "'" & txtTax.Text & "', " _ & "'" & txtSSSLoan.Text & "', " _ & "'" & txtLates.Text & "', " _ & "'" & txtDed1.Text & "', " _ & "'" & txtDed2.Text & "', " _ & "'" & txtDed3.Text & "', " _ & "'" & txtDedDesc1.Text & "', " _ & "'" & txtDedDesc2.Text & "', " _ & "'" & txtDedDesc3.Text & "', " _ & "'" & txtTotalDed.Text & "', " _ & "'" & txtNetIncome.Text & "', " _ & "'" & DateTime.Now.ToString & "')" DBInsert.Connection = DBConn DBInsert.Connection.Open() DBInsert.ExecuteNonQuery() MsgBox("Payslip created successfully.", MsgBoxStyle.OKOnly) DBConn.Close() DBConn.Dispose() Catch ex As System.Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End SubPrivate Sub UpdatePaySlip() Try 'Dim dbCommand As OleDbCommand Dim DBConn As OleDbConnection Dim DBUpdate As New OleDbCommand DBConn = New OleDbConnection(ACCESS_CONNECTION_STRING) DBUpdate.CommandText = "UPDATE Payroll SET " & _ "FromPay = #" & dtpFromPay.Text & "#, " & _ "ToPay = #" & dtpToPay.Text & "#, " & _ "AssignCode = '" & strSelectedAssignCode & "', " & _ "NoWorkDays = '" & txtWorkDays.Text & "', " & _ "Rate = '" & txtDailyRate.Text & "', " & _ "RegWage = '" & txtTotal.Text & "', " & _ "RegOT = '" & txtRegOT.Text & "', " & _ "SunOT = '" & txtSunOT.Text & "', " & _ "HolOT = '" & txtHolPay.Text & "', " & _ "RegOTTotal = '" & txtRegOTTotal.Text & "', " & _ "SunOTTotal = '" & txtSunOTTotal.Text & "', " & _ "HolOTTotal = '" & txtHolPayTotal.Text & "', " & _ "Add1 = '" & txtAdd1.Text & "', " & _ "Add2 = '" & txtAdd2.Text & "', " & _ "Add3 = '" & txtAdd3.Text & "', " & _ "AddDesc1 = '" & txtAddDesc1.Text & "', " & _ "AddDesc2 = '" & txtAddDesc2.Text & "', " & _ "AddDesc3 = '" & txtAddDesc3.Text & "', " & _ "Incentives = '" & txtIncentives.Text & "', " & _ "Allowance = '" & txtAllowance.Text & "', " & _ "GrossPay = '" & txtGross.Text & "', " & _ "SSS_MCR = '" & txtSSS.Text & "', " & _ "WTax = '" & txtTax.Text & "', " & _ "SSS_Loans = '" & txtSSSLoan.Text & "', " & _ "Lates = '" & txtLates.Text & "', " & _ "Ded1 = '" & txtDed1.Text & "', " & _ "Ded2 = '" & txtDed2.Text & "', " & _ "Ded3 = '" & txtDed3.Text & "', " & _

"DedDesc1 = '" & txtDedDesc1.Text & "', " & _ "DedDesc2 = '" & txtDedDesc2.Text & "', " & _ "DedDesc3 = '" & txtDedDesc3.Text & "', " & _ "TotalDed = '" & txtTotalDed.Text & "', " & _ "NetPay = '" & txtNetIncome.Text & "' " & _ "WHERE AssignCode = '" & strSelectedAssignCode & "' And " & _ "FromPay = #" & dtpFromPay.Text & "# And " & _ "ToPay = #" & dtpToPay.Text & "#" DBUpdate.Connection = DBConn DBUpdate.Connection.Open() DBUpdate.ExecuteNonQuery() MsgBox("Payslip created successfully.", MsgBoxStyle.OKOnly) DBConn.Close() DBConn.Dispose() Catch ex As System.Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End SubPrivate Sub Calc_Gross() Try txtGross.Text = Convert.ToDouble(IIf(txtTotal.Text = "", "0.00", txtTotal.Text)) _ + Convert.ToDouble(IIf(txtRegOTTotal.Text = "", "0.00", txtRegOTTotal.Text)) _ + Convert.ToDouble(IIf(txtSunOTTotal.Text = "", "0.00", txtSunOTTotal.Text)) _ + Convert.ToDouble(IIf(txtHolPayTotal.Text = "", "0.00", txtHolPayTotal.Text)) _ + Convert.ToDouble(IIf(txtAllowance.Text = "", "0.00", txtAllowance.Text)) _ + Convert.ToDouble(IIf(txtIncentives.Text = "", "0.00", txtIncentives.Text)) _ + Convert.ToDouble(IIf(txtAdd1.Text = "", "0.00", txtAdd1.Text)) _ + Convert.ToDouble(IIf(txtAdd2.Text = "", "0.00", txtAdd2.Text)) _ + Convert.ToDouble(IIf(txtAdd3.Text = "", "0.00", txtAdd3.Text)) txtGross.Text = Format(CDbl(txtGross.Text), "0.00") Calc_Deductions() Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End SubPrivate Sub Calc_Deductions() Try txtTotalDed.Text = Convert.ToDouble(IIf(txtSSS.Text = "", "0.00", txtSSS.Text)) _ + Convert.ToDouble(IIf(txtTax.Text = "", "0.00", txtTax.Text)) _ + Convert.ToDouble(IIf(txtSSSLoan.Text = "", "0.00", txtSSSLoan.Text)) _ + Convert.ToDouble(IIf(txtLates.Text = "", "0.00", txtLates.Text)) _ + Convert.ToDouble(IIf(txtDed1.Text = "", "0.00", txtDed1.Text)) _

+ Convert.ToDouble(IIf(txtDed2.Text = "", "0.00", txtDed2.Text)) _ + Convert.ToDouble(IIf(txtDed3.Text = "", "0.00", txtDed3.Text)) txtTotalDed.Text = Format(CDbl(txtTotalDed.Text), "0.00") txtNetIncome.Text = Convert.ToDouble(IIf(txtGross.Text = "", "0.00", txtGross.Text) - IIf(txtTotalDed.Text = "", "0.00", txtTotalDed.Text)) txtNetIncome.Text = Format(CDbl(txtNetIncome.Text), "0.00") Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End SubPrivate Sub txtWorkDays_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtWorkDays.LostFocus If IsNumeric(txtWorkDays.Text) = False Then MsgBox("Please enter correct information", MsgBoxStyle.OKOnly) txtWorkDays.Focus() txtWorkDays.SelectAll() Exit Sub End If txtWorkDays.Text = Format(CDbl(txtWorkDays.Text), "0.0000") txtAllowance.Text = Format(dblAllowance * txtWorkDays.Text, "0.00") txtIncentives.Text = Format(dblIncentives * txtWorkDays.Text, "0.00") txtTotal.Text = Format(txtWorkDays.Text * txtDailyRate.Text, "0.00") Calc_Gross() End SubPrivate Sub txtRegOT_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtRegOT.LostFocus If IsNumeric(txtRegOT.Text) = False Then MsgBox("Please enter correct information", MsgBoxStyle.OKOnly) txtRegOT.Focus() txtRegOT.SelectAll() Exit Sub End If txtRegOT.Text = Format(CDbl(txtRegOT.Text), "0.0000") txtRegOTTotal.Text = Format(((txtDailyRate.Text / 8) * 1.25) * txtRegOT.Text, "0.00") Calc_Gross() End SubPrivate Sub txtSunOT_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtSunOT.LostFocus If IsNumeric(txtSunOT.Text) = False Then MsgBox("Please enter correct information", MsgBoxStyle.OKOnly) txtSunOT.Focus() txtSunOT.SelectAll() Exit Sub End If txtSunOT.Text = Format(CDbl(txtSunOT.Text), "0.0000") txtSunOTTotal.Text = Format(((txtDailyRate.Text / 8) * 1.3) * txtSunOT.Text, "0.00") Calc_Gross() End Sub Private Sub txtHolPay_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtHolPay.LostFocus If IsNumeric(txtHolPay.Text) = False Then MsgBox("Please enter correct information", MsgBoxStyle.OKOnly) txtHolPay.Focus()

txtHolPay.SelectAll() Exit Sub End If If IsValidTextbox(txtHolPay) = False Then Exit Sub txtHolPayTotal.Text = Format(txtDailyRate.Text * txtHolPay.Text, "0.00") Calc_Gross() End Subrivate Sub txtAllowance_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtAllowance.LostFocus If IsValidTextbox(txtAllowance) = False Then Exit Sub Calc_Gross() End Sub Private Sub txtIncentives_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtIncentives.LostFocus If IsValidTextbox(txtIncentives) = False Then Exit Sub Calc_Gross() End Sub Private Sub txtAdd1_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtAdd1.LostFocus If IsValidTextbox(txtAdd1) = False Then Exit Sub Calc_Gross() End Sub Private Sub txtAdd2_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtAdd2.LostFocus If IsValidTextbox(txtAdd2) = False Then Exit Sub Calc_Gross() End Sub Private Sub txtAdd3_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtAdd3.LostFocus If IsValidTextbox(txtAdd3) = False Then Exit Sub Calc_Gross() End Sub Private Sub txtSSS_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtSSS.LostFocus If IsValidTextbox(txtSSS) = False Then Exit Sub Calc_Deductions() End Sub Private Sub txtTax_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtTax.LostFocus If IsValidTextbox(txtTax) = False Then Exit Sub Calc_Deductions() End Sub Private Sub txtSSSLoan_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtSSSLoan.LostFocus If IsValidTextbox(txtSSSLoan) = False Then Exit Sub Calc_Deductions() End Sub Private Sub txtLates_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtLates.LostFocus If IsValidTextbox(txtLates) = False Then Exit Sub Calc_Deductions() End Sub Private Sub txtDed1_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtDed1.LostFocus If IsValidTextbox(txtDed1) = False Then Exit Sub Calc_Deductions()

End Sub Private Sub txtDed2_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtDed2.LostFocus If IsValidTextbox(txtDed2) = False Then Exit Sub Calc_Deductions() End Sub Private Sub txtDed3_LostFocus(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtDed3.LostFocus If IsValidTextbox(txtDed3) = False Then Exit Sub Calc_Deductions() End Sub Private Sub SelectIndex() Dim ThisItem As ListViewItem Dim intNumRows As Integer Try For Each ThisItem In lvName.SelectedItems intNumRows = lvName.Items.Count If ThisItem.Index + 1 <> intNumRows Then lvName.Items(ThisItem.Index + 1).Selected = True strSelectedAssignCode = lvName.Items(ThisItem.Index + 1).SubItems(0).Text End If Next Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.OKOnly) End Try End Sub Private Sub dtpFromPay_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles dtpFromPay.ValueChanged lvName_SelectedIndexChanged(sender, e) End Sub Private Sub dtpToPay_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles dtpToPay.ValueChanged lvName_SelectedIndexChanged(sender, e) End Sub Private Sub Label22_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label22.Click End Sub Private Sub GroupBox2_Enter(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles GroupBox2.Enter End SubPrivate Sub GroupBox4_Enter(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles GroupBox4.Enter End Sub Private Sub Label8_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label8.Click End Sub Private Sub Label7_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label7.Click End Sub Private Sub Panel2_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel2.Paint End Sub Private Sub Label21_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label21.Click End Sub

Private Sub txtDailyRate_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtDailyRate.TextChanged End SubEnd Class

Public Class ReportDialog Inherits System.Windows.Forms.FormPrivate Sub btnCancel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCancel.Click Me.Close() End Sub Private Sub btnPreview_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPreview.Click Dim frmReport As Reports If optVoucher.Checked = True Then frmReport = New Reports(Me, "Voucher.rpt") frmReport.Show() ElseIf optPayrollSum.Checked = True Then frmReport = New Reports(Me, "PayrollSum.rpt") frmReport.Show() Else Dim frmListofEmpReport As ListofEmpReport frmListofEmpReport = New ListofEmpReport(Me, "EmployeesList.rpt") frmListofEmpReport.Show() End If End Sub Private Sub optVoucher_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optVoucher.CheckedChanged If optVoucher.Checked = True Then GroupBox1.Enabled = True End If End Sub Private Sub optPayrollSum_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optPayrollSum.CheckedChanged If optPayrollSum.Checked = True Then GroupBox1.Enabled = True End If End Sub Private Sub optListofEmp_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optListofEmp.CheckedChanged If optListofEmp.Checked = True Then GroupBox1.Enabled = False End If End Sub

Private Sub Panel1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel1.Paint End Sub Private Sub Panel2_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel2.Paint End Sub Private Sub ReportDialog_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load End SubEnd Class

Imports System.Data.OleDbPublic Class Password Inherits System.Windows.Forms.Form Dim ACCESS_CONNECTION_STRING As String = cnSettings() Dim strSelectedAssignCode As String Dim strOldPassword As StringProtected Overrides Function ProcessCmdKey(ByRef msg As System.Windows.Forms.Message, ByVal keyData As System.Windows.Forms.Keys) As Boolean Select Case msg.WParam.ToInt32() Case 13 ' enter Key If TypeOf Me.ActiveControl Is TextBox Then SendKeys.Send("{Tab}") Return True End If End Select Return MyBase.ProcessCmdKey(msg, keyData) End Function 'ProcessCmdKey

Private Sub Password_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load PopulateUser() End Sub Private Sub PopulateUser() Dim Connection As New OleDbConnection(ACCESS_CONNECTION_STRING)

lvUserName.Items.Clear() lvUserName.Sorting = SortOrder.Ascending Dim cmdfill As New OleDbCommand("SELECT UserName, [Password] FROM [Password]", Connection) Try Connection.Open() Dim datareader As OleDbDataReader datareader = cmdfill.ExecuteReader While datareader.Read Dim lvi As New ListViewItem lvi.Text = CStr(datareader("UserName")) lvUserName.Items.Add(lvi) End While If datareader.HasRows Then lvUserName.TopItem.Selected = True lvUserName.TopItem.Focused = True lvUserName.TopItem.EnsureVisible() lvUserName.Select() End If Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "Error") Finally Connection.Close() End Try End Sub Private Sub RetrieveUser() Dim Connection As New OleDbConnection(ACCESS_CONNECTION_STRING) Dim cmdfill As New OleDbCommand("SELECT UserName, [Password] FROM [Password] Where UserName = '" & strSelectedAssignCode & "'", Connection) Try Connection.Open() Dim datareader As OleDbDataReader datareader = cmdfill.ExecuteReader datareader.Read() txtUserName2.Text = CStr(datareader("UserName")) strOldPassword = CStr(datareader("Password")) Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "Error") Finally Connection.Close() End Try End Sub Private Sub AddUser() Try 'Dim dbCommand As OleDbCommand Dim DBConn As OleDbConnection Dim DBInsert As New OleDbCommand DBConn = New OleDbConnection(ACCESS_CONNECTION_STRING) DBInsert.CommandText = "INSERT INTO [Password] VALUES (" _ & "'" & txtUserName1.Text & "', " _

& "'" & txtPassword1.Text & "')" Dim lvi As New ListViewItem lvi.Text = txtUserName1.Text lvUserName.Items.Add(lvi) clearTxtBox() DBInsert.Connection = DBConn DBInsert.Connection.Open() DBInsert.ExecuteNonQuery() DBConn.Close() DBConn.Dispose() Catch ex As System.Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End Sub Private Sub UpdateUser() Try 'Dim dbCommand As OleDbCommand Dim DBConn As OleDbConnection Dim DBUpdate As New OleDbCommand DBConn = New OleDbConnection(ACCESS_CONNECTION_STRING) DBUpdate.CommandText = "UPDATE [Password] SET " & _ "[Password] = '" & txtPassword2.Text & "' " & _ "WHERE UserName = '" & txtUserName2.Text & "'" clearTxtBox() DBUpdate.Connection = DBConn DBUpdate.Connection.Open() DBUpdate.ExecuteNonQuery() DBConn.Close() DBConn.Dispose() Catch ex As System.Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "General Error") End Try End Sub Private Sub DeleteUser() Try Dim DBConn As OleDbConnection Dim dbCommand As New OleDbCommand 'Dim strPath As String DBConn = New OleDbConnection(cnSettings()) dbCommand.CommandText = "DELETE FROM [Password] " _ & "WHERE UserName = '" & strSelectedAssignCode & "'" dbCommand.Connection = DBConn dbCommand.Connection.Open() dbCommand.ExecuteNonQuery() lvUserName.Items.Remove(lvUserName.FocusedItem) DBConn.Close() Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.Critical, "Error") End Try End Sub Private Sub clearTxtBox() txtUserName1.Text = "" txtUserName2.Text = "" txtPassword1.Text = "" txtPassword2.Text = "" txtConfirmPassword1.Text = ""

txtConfirmPassword2.Text = "" txtOldPassword.Text = "" End Sub Private Sub lvUserName_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles lvUserName.MouseDown Try If IsNothing(lvUserName.FocusedItem) Then Exit Sub strSelectedAssignCode = lvUserName.FocusedItem.Text If e.Button = MouseButtons.Right Then If lvUserName.SelectedItems.Count > 0 Then ContextMenu1.Show(lvUserName, New Point(e.X, e.Y)) End If End If Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.OKOnly) End Try End Sub Private Sub lvUserName_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lvUserName.SelectedIndexChanged Try 'If IsNothing(lvUserName.FocusedItem) Then Exit Sub Catch ex As Exception MsgBox(ex.Message, MsgBoxStyle.OKOnly) End Try End Sub Private Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click Me.Close() End Sub Private Sub MenuItem2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) grpEdit.Hide() grpAdd.Show() End Sub Private Sub mnuAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles mnuAdd.Click grpAdd.Visible = True grpEdit.Visible = False btnUpdate.Text = "&Save" End Sub Private Sub mnuEdit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles mnuEdit.Click grpEdit.Visible = True grpAdd.Visible = False btnUpdate.Text = "&Update" RetrieveUser() End Sub Private Sub btnUpdate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnUpdate.Click If btnUpdate.Text = "&Save" Then If txtPassword1.Text <> txtConfirmPassword1.Text Then MsgBox("Password does not match.", MsgBoxStyle.OKOnly) Exit Sub End If AddUser() Else If txtOldPassword.Text <> strOldPassword Then

MsgBox("Please enter the correct password in the Old Password field.", MsgBoxStyle.OKOnly) Exit Sub End If If txtPassword2.Text <> txtConfirmPassword2.Text Then MsgBox("Password does not match.", MsgBoxStyle.OKOnly) Exit Sub End If UpdateUser() End If End Sub Private Sub mnuDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles mnuDelete.Click If strSelectedAssignCode = "Admin" Then MsgBox("Sorry you can't delete this account.", MsgBoxStyle.OKOnly) Exit Sub End If If MsgBox("Are you sure you want to delete this user?", MsgBoxStyle.YesNo) = MsgBoxResult.Yes Then _ DeleteUser() End Sub Private Sub Label23_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label23.Click End SubEnd Class