Resume for automotive work ( FEA modeling & analysis)

Projects accomplished:

Project related to powertrain (engine & transmission) assembly/subsystem/component label:-

FEA modeling of front wheel drive V6 engine assembly with transmission assemblyo Geometry modification through FEA tool of bearing cap with transmission

housing assembly to avoid eccentric loading in rotary part. o Transmission housing modeling with new geometry.

FEA modeling of attachment Brackets of Engine for dynamic stress analysis.

FEA Modeling of Engine head cover, oil pan and timing chain cover for frequency response and radiated noise verification analysis in sysnoise.

Solid modeling (hexa, penta, tetra) modeling of Inline 4 Cylinder engine assembly.

FE Modeling of V8, V6, inline 8 bore, 6 bore and 4 bore Block with head geometry for NVH optimization.

FE Sub Modeling of V8, V6, inline 8 bore, 6 bore and 4 bore Block with head geometry for geometry optimization with full load condition.

FE Modeling of Intake Manifold for dynamic structural optimization.

FE Modeling of connecting rod for dynamic structural optimization.

CAD geometry updation with FEA element of crank shaft for dynamic optimization.

Load and boundary condition updation in crank DOE model.

FEA modeling of real wheel drive Power Train Assembly (head, block, bearing cap, oil pan, bell housing, adopter and transmission housing with oil pan) for bending analysis with optimization of bell housing.

Modeling of purge valve assembly for Bolt distortion, bolt layout optimization & stress distribution analysis due to high pressure operating fluid.

Hexa modeling of purge valve assembly section for Stress distribution and stress concentration verification on operating environment condition.

Hexa modeling of front wheel drive transmission casing (D-16) for Stress distribution and stress concentration verification on operating environment condition.

Tetra modeling of front wheel drives transmission casing assembly (D-16) with mountings for Stress distribution and stress concentration verification on operating environment condition.

Resume for automotive work ( FEA modeling & analysis)

FEA geometry updation of rear wheel drive transmission casing with taking old models element for dynamic stress and displacement verification with new design.

Hexa modeling of one set of gear with shaft by capturing all the Features and also without capturing features for dynamic stress verification.

Project related to BIW assembly/subsystem/component label:- FE modeling of air filters Assembly.

FE modeling of head lamp and tell lamp housing Assembly.

FEA modeling of heat sealed.

FEA Modeling of components related to engine compartment for NVH and durability optimization.

New MUV and SUV CAD assembly model updation with existing FEA model and new automated tool generated FEA assembly for NVH and structural optimization.

FEA modeling of exhaust assembly for inline 4-cylinder bore for NVH and thermo-structural optimization.

FEA modeling and updation of engine and transmission mounting for NVH and durability optimization.

FEA modeling and assembling of MUV chassis (engine compartment components and front rail) for NVH and durability optimization.

FEA modeling of fuel tank and updation of tank with old assembly.

FEA modeling of rear and front bumper foam.

FEA modeling front grill.

FEA modeling of bumper frame.

FEA modeling of front hood assembly.

FEA modeling of dash board.

FEA modeling of front and rear seat foam for acoustic and safety optimization.

FEA shell coat modeling of V-6 engine assembly for frontal impact analysis.