thermally broken cladding support system › wzukusers › user...for cladding attachment systems....

Thermally Broken Cladding Support SystemNV3 - HPL

S-01 NVELOPE BRACKET DETAILSS-02 NVELOPE RAIL & PROFILE DETAILSS-03 NVELOPE FASTENER DETAILS

D-01a PLAN DETAIL - STEEL STUD FRAMED WALLD-01b PLAN DETAIL - CONCRETE WALLD-01c PLAN DETAIL - CMU/MASONRY WALLD-02 STOREFRONT JAMB DETAILD-03 OUTSIDE CORNER DETAILS-04 INSIDE CORNER DETAILS-05 PARAPET DETAILS-06 STOREFRONT HEAD DETAILS-07 STOREFRONT SILL DETAILS-08 BASE DETAILS-09 HORIZONTAL PANEL JOINT

System:

Issue Date:

Scale: Sheet:

System ID:

GUIDE DETAILS BY SFS ARE PROVIDED FOR GENERAL REFERENCE ONLY AND REPRESENT TYPICAL CONDITIONSFOR CLADDING ATTACHMENT SYSTEMS. PROJECT SPECIFIC ENGINEERING IS REQUIRED TO ADDRESS WIND LOAD,CLADDING WEIGHT, TYPE, PROJECTION, SPACING, ETC. CONTACT SFS FOR ADDITIONAL INFORMATION. ANY ANDALL IMPLIED WARRANTIES INCLUDING APPROPRIATENESS FOR A SPECIFIC PURPOSE ARE EXPLICITLY EXCLUDED.

Sheet Title:SFS Group USA, Inc.Construction Division1045 Spring StreetWyomissing, PA 19610T: +1 (800) 234-4533

e. [email protected]. http://www.nvelope.us

SYSTEM:CLADDING:

COVERSHEET & DRAWING INDEX

N.T.S.

NV3-HPL

COVER

07/10/17NV3-HPLHPL PANEL (HIDDEN FASTENER)

NVELOPE BRACKET - ADJUSTMENT RANGE

300mm VB-300 MNC-300 11-7/8" (302mm) 13-7/16" (342mm)

270mm VB-270 MNC-270 10-11/16" (272mm) 12-5/16" (312mm)

240mm VB-240 MNC-240 9-1/2" (242mm) 11-1/8" (282mm)

90mm VB-90 MNC-90 3-5/8" (92mm) 5-3/16" (132mm)

60mm VB-60 MNC-60 2-7/16" (62mm) 4" (102mm)

40mm VB-40 MNC-120 1-7/8" (47mm) 2-5/8" (67mm)

210mm VB-210 MNC-210 8-3/8" (212mm) 9-15/16" (252mm)

180mm VB-180 MNC-180 7-3/16 (182mm) 8-3/4" (222mm)

150mm VB-150 MNC-150 6" (152mm) 7-9/16" (192mm)

120mm VB-120 MNC-120 4-13/16" (122mm) 6-3/8" (162mm)

SIZE STEEL TOFROMMASONRY

3/16"

[5]

6" [1

52]

7 9/16

" [19

2]

6 7/8"

[175

]3/1

6" [5

]

7 3/16

" [18

2]

8 3/4"

[222

]

9 15/1

6" [2

52]

8 3/8"

[212

]

8 1/16

" [20

5]3/1

6" [5

]

11 1/

8" [2

82]

9 1/2"

[242

]

9 1/4"

[235

]3/1

6" [5

]

1'-0 5

/16" [

312]

10 11

/16" [

272]

3/16"

[5]

10 7/

16" [

265]

5 11/1

6" [1

45]

11 5/

8" [2

95]

3/16"

[5]

11 7/

8" [3

02]

1'-1 7

/16" [

342]

3/16"

[5]

3/16"

[5]

3/16"

[5]

3/16"

[5]

3 3/8"

[85]

4 1/2"

[115

]

4 13/1

6" [1

22]

6 3/8"

[162

]

3 5/8"

[92]

5 3/16

" [13

2]

2 7/16

" [62

]

4" [1

02]

1 9/16

" [40

]

1 7/8"

[47]

2 5/8"

[67]

NVELOPE BRACKETS AND VARIABLE DEPTH RANGES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

NVELOPE BRACKET DETAILS

3" = 1'-0"

NV3-HPL

S-01


3 1/8" [80] 4 3/4" [120] 5 1/2" [140]

1 9/16" [40] 3 15/16" [100]

3 15/16" [100]1 9/16" [40]

4 3/4" [120]

2 3/8"

[60]

2 3/8"

[60]

2 3/8"

[60]

2 3/8"

[60]

2 3/8"

[60]

1 9/16

" [40

]1"

[25]

5 1/2" [140]

1 3/16" [30]2 3/16" [55]

1 3/4" [45] 1 3/16" [30]

1" [2

5]1 9

/16" [

40]

2 3/8"

[60]

1 9/16

" [40

]

NVELOPE CLADDING RAILS AND MOUNTING PROFILESZ25-45-30

2.5MM

1 3/8" [35] 2 1/16" [53]2 1/16" [53]

1 11/16" [43] 1 3/8" [35] 1 11/16" [43]

OM25-120

2.4MM

L60-40

2.2MM & 2.5MM

T40-100

2.2MM

T60-100

2.2MM & 2.5MM

OM40-140

2.4MM

HBL60-40

2.5MM

T60-80

2.2MM

Z40-55-30

2.4MM

T60-120

2.2MM

T60-140

2.2MM

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

NVELOPE RAIL & PROFILE DETAILS

6" = 1'-0"

NV3-HPL

S-02


F01 Nvelope Bracket to Steel Stud Framing 2" (50mm) 1/4" (#14) HWH Self-Drill 1544249

F08 Horizontal NV3 Rails to NV3 Hanger Clips 2-3/8" (61mm) 5.5mm (#12) HWH Self-Drill 1544248F07 Horizontal Profiles to Vertical Rail 7/8" (22mm) 5.5mm (#12) HWH Self-Drill 1544263F06 Vertical Rail to Nvelope Wall Bracket 3/4" (19mm) 4.8mm (#10) Pan-Head/SR Self-Drill 1544261F05 NH-2 Adapter to Nvelope Wall Bracket 3/4" (19mm) 4.8mm (#10) Pan-Head/SR Self-Drill 1544261F04 Nvelope Bracket to Wood Stud Framing 2-1/16" (52mm)6.5mm HWH Self-Drill 1544250F03 Nvelope Bracket to Concrete Wall Varies* 11mm (Max) Varies* Varies* Varies*F02 Nvelope Bracket to CMU Substrate Varies* 11mm (Max) Varies* Varies* Varies*

NO: TYPICAL USE & APPLICATION LENGTH DIAMETER HEAD/DRIVE TIP PART

NVELOPE CLADDING RAILS AND MOUNTING PROFILES

BRACKET AT WOOD STUD BRACKET AT CMU BLOCK

BRACKET AT CONCRETEBRACKET AT STEEL STUD

GENERAL FASTENER NOTES:

1. CONCRETE AND MASONRY ANCHOR TYPES VARY BASED ON PROJECT SPECIFIC REQUIREMENTS INCLUDING BUTNOT LIMITED TO WIND LOADs, DEAD LOADS, BUILDING HEIGHT, SEISMIC/SAFETY FACTOR, OR ANY REQUIREMENTSMANDATED BY THE ENGINEER OF RECORD (EOR) AND/OR AUTHORITIES HAVING JURISTICTION (AHJ). CONTACTNVELOPE OR SEE COVER FOR ADDITIONAL INFORMATION AND CONSIDERATIONS.

2. EXPOSED CLADDING FASTENERS MAY VARY BY CLADDING TYPE, APPLICATION, SPACING, DESIGN INTENT ANDDESIRED AESTHETIC AND/OR MANUFACTURER FASTENER REQUIREMENTS. CONTACT NVELOPE FOR INFORMATION.

2 15/1

6" [7

5]1 1

/2" [3

8]

1 1/2"

[38]

2 15/1

6" [7

5]

2" [50]

2 3/8" [61]

2 1/16" [52]

7/8" [22]

3/4" [19]

3/4" [19]

VARIESVARIES

F08F08

F07F07

F06F06

F05F05

F04F04

F03F03

F02F02

F01F01

SLIDING RAIL FASTENING FIXED RAIL FASTENING

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

NVELOPE FASTENER DETAILS

6" = 1'-0"

NV3-HPL

S-03


System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

PLAN DETAIL - STEEL/WOOD STUD

3" = 1'-0"

NV3-HPL

D-01a


1. STUD FRAMED WALL ASSEMBLY PER ARCH.2. WEATHER AND AIR BARRIER PER ARCH.3. MINERAL WOOL INSULATION, THICKNESS PER ARCH.4. NVELOPE BRACKET WITH THERMAL ISOLATOR, SIZE AS REQUIRED5. NVELOPE VERTICAL ALUMINUM "L" OR "T" PROFILE6. NVELOPE HORIZONTAL "NV3 HANGING RAIL"

7. NVELOPE "NV3 HANGER CLIP"8. PANEL PER ARCH, SUPPLIED BY OTHERS9. 5.5 MM X 50 MM SECURING SCREW OR ADJUSTING SCREW10. OPTIONAL CLOSURE TRIM AT JOINTS BY INSTALLER11. FASTENER SPACING, EDGE DISTANCE, AND OPEN PANEL

JOINT DIMENSIONS PER PANEL MANUFACTURER, TYPICAL.

DRAWING KEYNOTES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

PLAN DETAIL - CONCRETE WALL

3" = 1'-0"

NV3-HPL

D-01b


1. CONCRETE WALL ASSEMBLY PER ARCH.2. WEATHER AND AIR BARRIER PER ARCH.3. MINERAL WOOL INSULATION, THICKNESS PER ARCH.4. NVELOPE BRACKET WITH THERMAL ISOLATOR, SIZE AS REQUIRED5. NVELOPE VERTICAL ALUMINUM "L" OR "T" PROFILE6. NVELOPE HORIZONTAL "NV3 HANGING RAIL"



DRAWING KEYNOTES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

PLAN DETAIL - CMU/MASONRY

3" = 1'-0"

NV3-HPL

D-01c


1. CMU/MASONRY WALL ASSEMBLY PER ARCH.2. WEATHER AND AIR BARRIER PER ARCH.3. MINERAL WOOL INSULATION, THICKNESS PER ARCH.4. NVELOPE BRACKET WITH THERMAL ISOLATOR, SIZE AS REQUIRED5. NVELOPE VERTICAL ALUMINUM "L" OR "T" PROFILE6. NVELOPE HORIZONTAL "NV3 HANGING RAIL"



DRAWING KEYNOTES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

STOREFRONT JAMB DETAIL

3" = 1'-0"

NV3-HPL

D-02





DRAWING KEYNOTES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

OUTSIDE CORNER DETAIL

3" = 1'-0"

NV3-HPL

D-03





DRAWING KEYNOTES

OPEN "STRAIGHT EDGE"CORNER OPTION SHOWN

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

INSIDE CORNER DETAIL

3" = 1'-0"

NV3-HPL

D-04


1. STUD FRAMED WALL ASSEMBLY PER ARCH.2. WEATHER AND AIR BARRIER PER ARCH.3. MINERAL WOOL INSULATION, THICKNESS PER ARCH.4. NVELOPE BRACKET WITH THERMAL ISOLATOR, SIZE AS REQ'D5. NVELOPE VERTICAL ALUMINUM "L" OR "T" PROFILE6. NVELOPE HORIZONTAL "NV3 HANGING RAIL"7. NVELOPE "NV3 HANGER CLIP"8. PANEL PER ARCH, SUPPLIED BY OTHERS9. 5.5 MM X 50 MM SECURING SCREW OR ADJUSTING SCREW10. OPTIONAL CLOSURE TRIM AT JOINTS BY INSTALLER11. FASTENER SPACING, EDGE DISTANCE, AND OPEN PANEL

JOINT DIMENSIONS PER PANEL MANUFACTURER, TYPICAL

DRAWING KEYNOTES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

PARAPET DETAIL

3" = 1'-0"

NV3-HPL

D-05


1. STUD FRAMED WALL ASSEMBLY PER ARCH.2. WEATHER AND AIR BARRIER PER ARCH.3. MINERAL WOOL INSULATION, THICKNESS PER ARCH.4. NVELOPE BRACKET WITH THERMAL ISOLATOR, SIZE AS REQUIRED5. NVELOPE VERTICAL ALUMINUM "L" OR "T" PROFILE6. NVELOPE HORIZONTAL "NV3 HANGING RAIL"7. NVELOPE "NV3 HANGER CLIP"8. PANEL PER ARCH, SUPPLIED BY OTHERS9. 5.5 MM X 50 MM SECURING SCREW OR ADJUSTING SCREW10. OPTIONAL CLOSURE TRIM AT JOINTS BY INSTALLER11. FASTENER SPACING, EDGE DISTANCE, AND OPEN PANEL


DRAWING KEYNOTES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

STOREFRONT HEAD DETAIL

3" = 1'-0"

NV3-HPL

D-06




DRAWING KEYNOTES

System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

STOREFRONT SILL DETAIL

3" = 1'-0"

NV3-HPL

D-07


DRAWING KEYNOTES1. STUD FRAMED WALL ASSEMBLY PER ARCH.2. WEATHER AND AIR BARRIER PER ARCH.3. MINERAL WOOL INSULATION, THICKNESS PER ARCH.4. NVELOPE BRACKET WITH THERMAL ISOLATOR, SIZE AS REQUIRED5. NVELOPE VERTICAL ALUMINUM "L" OR "T" PROFILE6. NVELOPE HORIZONTAL "NV3 HANGING RAIL"7. NVELOPE "NV3 HANGER CLIP"8. PANEL PER ARCH, SUPPLIED BY OTHERS9. 5.5 MM X 50 MM SECURING SCREW OR ADJUSTING SCREW10. OPTIONAL CLOSURE TRIM AT JOINTS BY INSTALLER11. FASTENER SPACING, EDGE DISTANCE, AND OPEN PANEL


System:

Issue Date:

Scale: Sheet:

System ID:




SYSTEM:CLADDING:

HORIZONTAL JOINT DETAIL

3" = 1'-0"

NV3-HPL

D-09




DRAWING KEYNOTES

thermally broken cladding support system › wzukusers › user...for cladding attachment systems....

Documents