thermal spray and machine, inc
TRANSCRIPT
![Page 1: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/1.jpg)
Thermal Spray and Machine, Inc.
Thermal Spray and Machine, Inc.2400 Hampton Boulevard, Suite B
Norfolk, VA. 23517Phone: (757) 623-6484 Fax: (757) 623-6483Email: [email protected] Website Address: www.tsmnorfolk.com
[email protected] [email protected]
Marine Applications of Thermal Spray TechnologyHard Chrome Alternatives Team Meeting
San Diego, CA 25 January 2006 Jim Galvin, President, Thermal Spray & Machine, Inc.
Dave Donohue, Corporate Technical Director, TSM, Inc.Charlie Hurd, West Coast Representative, TSM, Inc.
Chris Nichols, Vive President, Sales & Marketing, TSM, Inc.
![Page 2: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/2.jpg)
Report Documentation Page Form ApprovedOMB No. 0704-0188
Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering andmaintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information,including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, ArlingtonVA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if itdoes not display a currently valid OMB control number.
1. REPORT DATE 25 JAN 2006 2. REPORT TYPE
3. DATES COVERED 00-00-2006 to 00-00-2006
4. TITLE AND SUBTITLE Marine Applications of Thermal Spray Technology Hard ChromeAlternatives Team Meeting
5a. CONTRACT NUMBER
5b. GRANT NUMBER
5c. PROGRAM ELEMENT NUMBER
6. AUTHOR(S) 5d. PROJECT NUMBER
5e. TASK NUMBER
5f. WORK UNIT NUMBER
7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Thermal Spray and Machine, Inc,2400 Hampton Boulevard, Suite B,Norfolk,VA,23517
8. PERFORMING ORGANIZATIONREPORT NUMBER
9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S)
11. SPONSOR/MONITOR’S REPORT NUMBER(S)
12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution unlimited
13. SUPPLEMENTARY NOTES 26th Replacement of Hard Chrome and Cadmium Plating Program Review Meeting, January 24-26, 2006,San Diego, CA. Sponsored by SERDP/ESTCP.
14. ABSTRACT
15. SUBJECT TERMS
16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as
Report (SAR)
18. NUMBEROF PAGES
67
19a. NAME OFRESPONSIBLE PERSON
a. REPORT unclassified
b. ABSTRACT unclassified
c. THIS PAGE unclassified
Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18
![Page 3: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/3.jpg)
CUSTOMER BASE
• Approx. 40-45% of Overall Sales Volume – U.S. MilitaryNavy – Army – Coast Guard – Military Sealift Command
• Support Center For Shipyards, Manufacturing Plants, EElectrical, Hydraulic, and Mechanical Repair Facilities Eand Original Equipment Manufacturers
• Commercial CustomersAnheuser-Busch – Dupont – Weyerhaeuser – Alcoa Georgia Pacific - International Paper - Phillip MorrisHoneywell Performance Fibers … and a host of others..! !
![Page 4: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/4.jpg)
Thermal Spray & Machine, Inc. - CERTIFICATIONS1. SUPERVISOR OF SHIPBUILDING, CONVERSION & REPAIR, US NAVY, PORTSMOUTH, VA
Certification of Facilities in accordance with NAVSEA MIL-STD 1687A
2. COMMANDER NAVAL SEA SYSTEMS COMMAND (SEA 05M2) Approval of TSM’s Thermal Spray Coating Procedure FP-WC-01for HVOF Application of Tungsten Carbide
3. COMMANDER NAVAL SEA SYSTEMS COMMAND (SEA 05M2) Approval of TSM’s Thermal Spray Coating Procedure for HVOF Application of Alloy 625
4. NAVAL SURFACE WARFARE CENTER, CRANE DIVISION Certification of Facility IAW NAVSEA S9320-AM-PRO-030/MLDG Rev 02, Vol. III
5. COMMANDING OFFICER, SUBMEPP NAVSEA Qualification to Manufacture MIL-C-24231 Connector Plugs for Submarine Cables
6. AMERICAN BUREAU OF SHIPPING Certificate of Type Approval No. NN498634 of TSM’s Thermal Spray Coatings Including Main Propulsion Shafting Applications
7. AMERICAN BUREAU OF SHIPPING Certificate of Design Assessment No. 04-HS410093/2-PDA of TSM’s Process F/P WC-01 for Repair and Restoration of Marine Machinery Components
8. AMERICAN BUREAU OF SHIPPING Certificate of Manufacturing Assessment No. NN498634 of TSM’s Facilities and Associated Quality Procedures to Apply Coatings That Meet ABS Designated Standards
9. LLOYD’S REGISTER Certificate of Approval No. MNDE/REP/0001/01 of TSM’s Arc Spraying and HVOF Spraying Procedures
![Page 5: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/5.jpg)
No. 851-04
IMMEDIATE RELEASE September 1, 2004
U.S. Department of DefenseOffice of the Assistant Secretary of Defense (Public Affairs)News Release
DoD Issues Green Procurement PolicyThe Department of Defense today announced an important step forward in its efforts to
align mission and environmental stewardship by issuing a new “green procurement” policy. The policy affirms a goal of 100 percent compliance with federal laws and executive orders
requiring purchase of environmentally friendly, or “green” products and services.
Thermal Spray Process And Coatings Comply With DoD Green Procurement Policy…
• NO Hexavalent Chrome !• NO Cadmium !• NO Lead !
• NO Halogens !• NO Volatile Organic Compounds (VOC’s) !
• NO Phosphates !
![Page 6: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/6.jpg)
Applications of HVOF Thermal Spray• Bearing & Seal Journals• Manufacturing Rolls• Compressor Parts• Pump Shafts• Blower Shafts• Armature Shafts• Hydraulic Rods• Gear Fits• Pump Casings• Impellers• Centrifuges• Turbine Shafts• Sleeves
• Axle Shafts• Camshaft Journals• Pistons/Piston Rods• Crankshafts• Bow Thruster Shafts• Bearing Fits• Propeller Shafts• Rudder Posts• Valve Stems• Main Propulsion Shafts• Plungers• Mandrels• Packing Glands
![Page 7: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/7.jpg)
INNOVATION ! EXPERIENCE ! QUALITY !
MARINE APPLICATIONS
![Page 8: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/8.jpg)
INNOVATION ! EXPERIENCE ! QUALITY !
HARD CHROME REPLACEMENT
![Page 9: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/9.jpg)
HYDRAULIC CYLINDER RODShaft Coated With HVOF Applied Tungsten Carbide
HVOF Applied Tungsten Carbide Coatings Are An Approved Alternative For Hard Chrome Replacement ! !
These coatings are hard, dense, well bonded, wear resistant, seal friendly, and protect against corrosion !
![Page 10: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/10.jpg)
HYDRAULIC CYLINDER ROD
HVOF Applied Tungsten Carbide Coatings Are An Approved Alternative For Hard Chrome Replacement ! !
These coatings are hard, dense, well bonded, wear resistant, seal friendly, and protect against corrosion !
18 Inches
Shaft Coated With HVOF Applied Tungsten Carbide
![Page 11: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/11.jpg)
WEAPONS ELEVATOR CYLINDER ROD – USS WASPEntire Rod Repaired With HVOF Applied Tungsten Carbide As Hard Chrome Replacement
OVERALL ROD DIMENSIONS 10” Diameter X 24’ Long
Superfinished to Customer Specifications of 6 Ra
HVOF Applied Tungsten Carbide Coatings Are An Approved Alternative For Hard
Chrome Replacement ! !
Custom Designed TSM “Superfinisher” In Action
![Page 12: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/12.jpg)
USS BOONE (FFG-25) – STEERING ENGINE RUDDER RAM REPAIRED WITH TUNGSTEN CARBIDE-COBALT
REPLACING THE ORIGINAL HARD CHROME
AS DELIVEREDAS DELIVERED
AS RECEIVEDAS RECEIVED
![Page 13: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/13.jpg)
STERN GATE HYDRAULIC CYLINDER ROD - USS ASHLAND
Entire Rod Coated With HVOF Applied Tungsten Carbide As Hard Chrome Replacement
OVERALL ROD DIMENSIONS 6” Diameter X 13’ Long
HVOF Applied Tungsten Carbide Coatings Are An Approved Alternative For Hard
Chrome Replacement ! !
![Page 14: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/14.jpg)
INNOVATION ! EXPERIENCE ! QUALITY !
NAVY and COAST GUARD
HVOF APPLICATIONS
![Page 15: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/15.jpg)
LIFT FAN SHAFTSWe have coated the bearing journals on
more than 600 LCAC lift fan shafts extending the service life from 100 hours (1 Year) to over 700 hours
(7 Years) and still counting ! !PROJECTED SAVINGS: $20.1M Over
15 Year Service Life !
U.S. Navy Landing Craft (LCAC)
CLOSE-UP OF REPAIRED BEARING AREA
REPAIRED SEAL AREAS
![Page 16: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/16.jpg)
HVOF Applied Tungsten Carbide Cobalt/Nickel Coatings (TSM-0010)
Thermal Spray Coating (TSM-0010) not only increases corrosion protection but also increases surface hardness resulting in a substantial increase in material life. Normal carbon steel hardness is 22 on the Rockwell C Scale, by coating with Tungsten Carbide the hardness is increased to 64, almost three (3)
times the hardness of the original material.AIRCRAFT CARRIER ELEVATOR STANCHIONS
BEFORE
AFTER
![Page 17: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/17.jpg)
AIRCRAFT CARRIER FLIGHT DECK ELEVATOR LOCKING PINCoated With HVOF Applied Tungsten Carbide For Increased Wear Resistance
![Page 18: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/18.jpg)
USS Detroit - 63 Ton Rudder PostBearing and Seal Areas Repaired with HVOF Applied Inconel 625
Yes, that was 63 TONS (126,000 lbs.) !!
Saved the customer $193,000.00 and 25 schedule days
![Page 19: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/19.jpg)
USS KENNEDY – MAIN FEED PUMP TURBINEBearing and Seal Areas Repaired With HVOF Applied Tungsten Carbide
CLOSE-UP OF REPAIRED AREAS
BEARING AND SEAL AREAS REPAIRED
![Page 20: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/20.jpg)
USS KENNEDY – SHIP’S SERVICE TURBINE GENERATOR
BEFORE
AFTERBearing Areas Repaired with HVOF
Applied Tungsten Carbide
![Page 21: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/21.jpg)
USS NASHVILLE – SHIP’S SERVICE TURBINE GENERATOR ROTORBearing Area Repaired With HVOF Applied Tungsten
Carbide And Collector Rings Dressed
SHIP’S SERVICE TURBINE GENERATOR ROTOR AFTER REPAIR
![Page 22: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/22.jpg)
BEARING AREAS – AFTER REPAIR
BEARING AREAS REPAIRED WITH HVOF APPLIED TUNGSTEN CARBIDE
CONTROL ARM LEVER SHIP’S SERVICE TURBINE GENERATOR – USS NASHVILLE (LPD-14)
![Page 23: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/23.jpg)
TURBINE GENERATOR REDUCTION GEAR AND DRIVESHAFTBearing Areas Repaired With HVOF
Applied Tungsten Carbide
DRIVESHAFT – AFTER REPAIR
CLOSE-UP OF BEARING AREA AFTER REPAIR40”
USS PONCE (LPD-15)
REDUCTION GEAR
![Page 24: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/24.jpg)
SUBMARINE ELECTRIC MOTOR ROTORBearing Areas Repaired With HVOF Applied Tungsten Carbide
NOTE: This Is A Special Rotor Designed For Submarine Applications And The Finished Machining Tolerance Was .0002”
Over The Entire Length Of The Shaft For Noise Reduction.
![Page 25: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/25.jpg)
U.S. COAST GUARD – 110 CLASS RUDDER AND POST
CLOSE-UP OF REPAIRED AREAS
Packing, Bearing, and Seal Areas Repaired With HVOF Applied Tungsten Carbide
![Page 26: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/26.jpg)
Submarine Vacuum Pump ShaftBearing Area Repaired with HVOF Applied WCCo/NI
![Page 27: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/27.jpg)
USS WASP - STEERING ENGINE RUDDER RAMTUNGSTEN CARBIDE COBALT/NICKEL COATING
BEFORE
AFTER
![Page 28: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/28.jpg)
Bearing and Seal Area Repaired With HVOF Applied Tungsten CarbideFIN STABILIZER SHAFT
BEARING AND SEAL AREA AFTER REPAIR
BEFORE REPAIR – NOTE SCORING
![Page 29: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/29.jpg)
COAST GUARD ANCHOR WINDLASS DRUM
CLOSE-UP OF REPAIRED AREA
Seal Areas Repaired With HVOF Applied Tungsten Carbide
![Page 30: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/30.jpg)
NUCLEAR SUBMARINE SNORKEL INNER PIPEEntire Snorkel Surface Repaired with HVOF Applied Tungsten Carbide Coating
CLOSE-UP OF WORN
AREABEFORE
AFTER
![Page 31: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/31.jpg)
CLOSE-UP OF REPAIRED AREA
SUBMARINE SHAFT FOR TOWED ARRAY HANDLING EQUIPMENTBearing Area Restored With HVOF
Applied Tungsten Carbide for Increased Wear Resistance for Naval Undersea Warfare Center,
Newport Division
Restored bearing area completed 400 hour wear test by
NUWC, Newport with no measurable wear.
NUWC plans to restore all worn
TAHE with HVOF applied tungsten
carbide
![Page 32: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/32.jpg)
U.S. NAVY - PATROL COASTAL CRAFTMAIN PROPULSION SHAFTS
Bearing Journals Repaired With HVOF Applied Tungsten Carbide
Main Propulsion Shafts Installed In Strut Bearings After Repair
U.S. Navy – Patrol Coastal Craft
PC–1 Class - Length 170 Feet
![Page 33: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/33.jpg)
Z – DRIVE SEAL LINER
Repaired With HVOF Applied Tungsten CarbideMilitary Sealift Command – Cable Laying Ship
AFTER REPAIR – 26” Diameter Ring
![Page 34: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/34.jpg)
GATE VALVE – 12”
BEFORE REPAIRAFTER REPAIR
Seat Surface Repaired With HVOF Applied Tungsten Carbide
CLOSE-UP BEFORE REPAIR
CLOSE-UP AFTER REPAIR
![Page 35: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/35.jpg)
INNOVATION ! EXPERIENCE ! QUALITY !
COMMERCIAL
HIGH VELOCITY OXY-FUEL
(HVOF) APPLICATIONS
![Page 36: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/36.jpg)
BOW THRUSTER YOKEAlignment Fit Repaired With HVOF Applied Tungsten Carbide
AFTER REPAIR
BEFORE REPAIR NOTE: DEEP LATERAL SCORING
CLOSE-UP OF REPAIRED AREA
![Page 37: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/37.jpg)
CSX Lines - Bow Thruster ShaftBearing Journal and Seal Repaired with HVOF Applied WCCo/NI
Adjacent Flange Coated for Corrosion Prevention
![Page 38: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/38.jpg)
LINE WINCH DRIVE SHAFTSeal Area Repaired With HVOF
Applied Tungsten Carbide
AFTER REPAIR
DRIVE SHAFT BEFORE REPAIR
BEFORE REPAIR
NOTE CORROSION !
![Page 39: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/39.jpg)
DIESEL ENGINE TURBO BLOWERBearing Areas Repaired With HVOF Applied Tungsten Carbide
CLOSE-UP OF BEARING AREA AFTER REPAIR
CLOSE-UP OF BEARING AREA AFTER REPAIR
![Page 40: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/40.jpg)
PINION GEAR – TUGBOAT GEARBOX DRIVEBearing And Seal Area Repaired With HVOF Applied Tungsten Carbide
SEAL AREA AFTER REPAIR
BEARING AREA AFTER REPAIR
![Page 41: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/41.jpg)
Z-DRIVE SEAL LINERSBoth Seal Liners Put Into Operation at the Same Time.
After One Year of Operation…...
The Coated Liner Showed NO Signs of Wear !!(only a slight discoloring of the coating in the seal area)
The Un-Coated Liner Has (2) 1/8” Grooves Worn by the Seal !
COATED SEAL LINERHVOF Applied Tungsten Carbide
UNCOATED SEAL LINER1/8” Grooves Worn by Seal
1/8” GrooveNO WEAR !
1/8” Groove
NO WEAR !
![Page 42: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/42.jpg)
TUGBOAT Z-DRIVE SEAL LINERSeal Area Coated With HVOF Applied Tungsten Carbide
9 ½”
NEW SEAL LINER COATED WITH HVOF APPLIED TUNGSTEN CARBIDE
FOR INCREASED WEAR RESISTANCE !
![Page 43: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/43.jpg)
STEERING DRIVE SEAL RINGSWear Areas Coated With HVOF Applied Tungsten Carbide
Increased Wear Resistance Provides Longer Service Life !
![Page 44: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/44.jpg)
OIL DISTRIBUTION BOX SHAFT FOR CHANGEABLE PITCH PROPELLER
Bearing And Seal Areas Repaired With HVOF Applied Tungsten Carbide
BEFORE AFTER
![Page 45: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/45.jpg)
BUTTERFLY VALVE STEMNew Shaft Coated With HVOF Applied Tungsten Carbide To Prevent Wear
OLD VALVE STEM
NEW VALVE STEM WITH COATING
CLOSE-UP VIEW
![Page 46: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/46.jpg)
INNOVATION ! EXPERIENCE ! QUALITY !
NAVY and COAST GUARD ELECTRIC ARC
APPLICATIONS
![Page 47: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/47.jpg)
USS Halyburton – Rudder PostSeal Area Repaired with Arc Wire Al/Br Bearing Area Repaired with Arc Wire SS
![Page 48: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/48.jpg)
DIESEL ENGINE COUPLING – MILITARY SEALIFT COMMANDWear Groove Repaired With Arc-Wire Applied Inconel 625
ONE-HALF OF COUPLING BEFORE REPAIR
WORN AREA
CLOSE-UP OF WEAR AREA BEFORE REPAIR
AS-SPRAYED
Wear Groove is .150” Deep, 5/8” Wide, and 28” Long
AFTER REPAIR NOTE: COUPLING HALF IS INVERTED
26”
![Page 49: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/49.jpg)
AIRCRAFT CARRIER HANGAR BAY DOOR ROLLERS
Roller Surface Area Coated With Arc-Wire Applied
Pseudo-alloy AlBr-Mo
![Page 50: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/50.jpg)
Submarine Bow Plane Housing Mating FlangesRepaired with Arc Wire Molybdenum
![Page 51: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/51.jpg)
PLUG FOR DUPLEX STRAINERRepaired Plug With Arc-Wire Applied AlBr And Machined to Fit
STRAINER BODY
BEFORE REPAIR AFTER REPAIR AND MACHINED
![Page 52: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/52.jpg)
U.S. Coast Guard - CHANGEABLE PITCH PROPELLER HUB
U.S. COAST GUARD – 210 CLASS CHANGEABLE PITCH PROPELLER HUB
Damaged O-Ring Seal Areas Repaired With Arc-Wire Applied Bronze
PORT – AFTER REPAIR
AFTER REPAIR – CLOSE-UP OF O-RING SEAL AREA
![Page 53: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/53.jpg)
ELECTRIC MOTOR GENERATOR ROTORThrust Bearing Areas Repaired With Arc-Wire Applied Inconel 625
AFTER REPAIR AFTER REPAIR
![Page 54: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/54.jpg)
INNOVATION ! EXPERIENCE ! QUALITY !
COMMERCIAL ELECTRIC ARC SPRAYED APPLICATIONS
![Page 55: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/55.jpg)
MV OCEAN BREEZE - Main Propulsion ShaftRepaired with Arc Wire Al/Br and Finished with WCCo/Ni
Shaft Worn 1 ¼” on Diameter ! – Repaired in Less Than 24 Hours!
TSM saved this Customer over $200,000 and more than 2 weeks downtime ! !
![Page 56: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/56.jpg)
MAIN ENGINE COUPLING HUB - TUGBOAT
AFTER REPAIR
I.D. Of Hub Repaired With
Arc-Wire Applied Carbon Steel
![Page 57: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/57.jpg)
LOW PRESSURE CHAMBER FOR OIL DISTRIBUTION SYSTEM FOR CHANGEABLE PITCH PROPELLER
BEFORE REPAIR NOTE: PITTING !
CLOSE-UP AFTER REPAIR
I.D. Areas (Corrosion) Repaired With Arc Wire Applied High Carbon Steel
![Page 58: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/58.jpg)
GEARBOX CASINGBearing Area Repaired With Arc-Wire Applied Inconel 625 And Line Bored
CLOSE-UP AFTER BEING REPAIRED AND LINE BORED
AS-SPRAYED BEFORE LINE
BORING
AFTER REPAIR
![Page 59: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/59.jpg)
ELECTRIC MOTOR SHAFT
Impeller Fit Area Repaired With Arc-Wire Applied CrSS
BEFORE
AFTER
![Page 60: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/60.jpg)
INNOVATION ! EXPERIENCE ! QUALITY !
PLASMA APPLIED NON-CONDUCTIVE COATING
![Page 61: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/61.jpg)
SUBMARINE CABLE CONNECTORS
COMPLETED CONNECTOR WITH POLYURETHANE COATING
Connector Bodies Coated With Plasma Applied NCC Ceramic Coating To Prevent Corrosion Caused By Surface Electrical Currents On The Connectors. This Corrosion
Would Cause The Polyurethane Coating To Separate Resulting In Failure.
SUCCESS STORY
TSM HAS COATED MORE
THAN 25,000 CONNECTORS !
SINCE TSM HAS STARTED APPLYING NCC COATING TO
SUBMARINE CABLE CONNECTORS, THERE HAS
NOT BEEN ONE DOCUMENTED FAILURE !
![Page 62: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/62.jpg)
SSN SPECIAL PURPOSE MOTOR LEAD CONNECTOR
UNCOATED COATED
Connector Body Coated With Plasma Applied Non-Conductive Ceramic Coating To Prevent Corrosion By Galvanic Action
![Page 63: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/63.jpg)
SUBMARINE ELECTRONICS ENCLOSUREInterior Of Enclosure NCC Coated
![Page 64: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/64.jpg)
SUBMARINE AIR INTAKE FLAPPER VALVEValve Flapper Coated With Plasma Applied Non-Conductive Ceramic Coating To Prevent Corrosion By Galvanic Action
![Page 65: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/65.jpg)
Valve Arm Coated With Plasma Applied Non-Conductive Ceramic Coating To Prevent Corrosion By Galvanic Action
SUBMARINE AIR INTAKE VALVE FLAPPER ARM
VALVE ARM “AS RECEIVED”
AFTER COATING
![Page 66: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/66.jpg)
SUBMARINE SONAR TRANSDUCER PLATE
UNCOATED
AFTER COATING
Surface Coated With Plasma Applied Non-Conductive Ceramic Coating (NCC) To Resist Corrosion From Galvanic Action
![Page 67: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/67.jpg)
NON-CONDUCTIVE COATING DIVISION
RECEIVING & PREP
SPRAY BOOTH
CLEANING & SEALING
Q.A. & SHIPPING
NCC DIVISION A Segregated, Independent
Production Cell
![Page 68: Thermal Spray and Machine, Inc](https://reader033.vdocuments.us/reader033/viewer/2022050612/627414e38edb760fee5d01b0/html5/thumbnails/68.jpg)
U.S. ARMY HELLFIRE MISSILE EXHAUST DIFFUSERProtected By Plasma Applied Thermal Barrier Coating Of Yttria Stabilized Zirconium Oxide To Deflect Intense Heat
Of Missile Exhaust Away From Helicopter
Diffusers Used On U.S. Army Blackhawk Helicopters
Success Story ! 629 Diffusers Coated By
TSM For U.S. Army !