thermal management of flexible electronic...
TRANSCRIPT
![Page 1: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/1.jpg)
Sammakia 4-06
Thermal Management of Flexible Electronic
Systems
(what are the unique thermal/mechanical design features
of a flexible electronic system)
![Page 2: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/2.jpg)
Sammakia 4-06
Modes of Heat Transfer in Electronic Systems
![Page 3: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/3.jpg)
Sammakia 4-06
•Conduction (relatively simple analysis, will introduce today)
•Convection (mostly empirical and numerical)•Radiation (often negligible
at low operating temperatures)•Multimode (combinations of the above modes)
Modes of heat transfer
![Page 4: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/4.jpg)
Sammakia 4-06
Classification of levels of packaging…why ???
Thermal
Mechanical
Electrical
Reliability
Functional
![Page 5: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/5.jpg)
Sammakia 4-06
Thermal aspects
First level….conduction heat transfer
Second level….convection and conduction
System level….thermodynamic considerations,
overall system balance, application
![Page 6: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/6.jpg)
Sammakia 4-06
•The design of a system should not be a set of individual requirements such as thermal, mechanical, electrical and functional. There should be one design that is optimal and meets all of the requirements.
•Case in point thermal and mechanical requirements.
![Page 7: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/7.jpg)
Sammakia 4-06
•Thermal and mechanical requirements are often conflicting.
•For example a large Cu heat sink is likely to adversely impact interconnect reliability (fatigue, shock, vibration)
![Page 8: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/8.jpg)
Sammakia 4-06
•Interconnects are vulnerable failure points in all systems
•Chip level interconnects are the most vulnerable (size and materials)
•This has a direct impact on thermal management and the mechanical design of the system
•Flexible electronics offer an advantage
![Page 9: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/9.jpg)
Sammakia 4-06
•Conduction (relatively simple analysis, will introduce today)
•Convection (mostly empirical and numerical)•Radiation (often negligible
at low operating temperatures)•Multimode (combinations of the above modes)
Modes of heat transfer
![Page 10: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/10.jpg)
Sammakia 4-06
Conduction
Heat transfer mode in solids and stationary fluids. Heat is transferred via random molecular interactions.
In gases: random molecular collisions (translational + vibration + rotational components)
In solids: combination of free electron transport and latticevibrations
In liquids: similar to gases but closer bonding between molecules
![Page 11: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/11.jpg)
Sammakia 4-06
ConductionRate of heat transfer: Fourier’s “Law” (isotropic material):
dxdTkqTkq −=∇−= "" ;~~ 1-D conduction
Temperature predictions: Heat diffusion equation(Fourier Law + energy balance)
tT
kc
kq
zT
yT
xT
∂∂
=+∂∂
+∂∂
+∂∂ ρ&
2
2
2
2
2
2 Rectangular coordinates;k is constant
• Need 6 boundary conditions + 1 initial condition
![Page 12: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/12.jpg)
Sammakia 4-06
Concept of Thermal Resistance
0=q&
02
2
=dx
Td
( ) 112 TLxTTT +−=
LkTTq )( 21
" −=
TLkAAqq ∆⎟
⎠⎞
⎜⎝⎛== "
Voltage (V)
Analogous to V= IR
or
or
L
•
•T1
T2q ′′
x
• Steadystate:
Current (I)
kALqTRth /=
∆=
Slab:
⎟⎟⎠
⎞⎜⎜⎝
⎛=
1
2ln2
1rr
LkRth π
⎟⎟⎠
⎞⎜⎜⎝
⎛−=
21
1141
rrkRth π
Cylindrical shell:
Spherical shell:
Assuming:• 1-D
• No internal heatgeneration:
![Page 13: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/13.jpg)
Sammakia 4-06
Concept of Thermal Resistance
In electronic packaging, a single chip package contains manymaterials. An overall resistance is defined:
qTT
R cjjc
−= : Internal thermal resistance
Junction temperature Case temperature
Typical values: 80 K/W: plastic package, no spreader
12 -20 K/W: plastic package with spreader
5 - 10 K/W: ceramic package
![Page 14: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/14.jpg)
Sammakia 4-06
•Conduction (relatively simple analysis, will introduce today)
•Convection (mostly empirical and numerical)•Radiation (often negligible
at low operating temperatures)•Multimode (combinations of the above modes)
Modes of heat transfer
![Page 15: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/15.jpg)
Sammakia 4-06
Thermal management in a second level packageGoverning Equations for fluids in motion:
Assuming the flow to be steady with constant properties except for the thermal conductivity in general and the density in the buoyancy term specifically, and neglecting viscous dissipation, the governing equations are,:
Continuity (mass conservation):
∇. V = 0
Momentum conservation:
ρ (V.∇)V= - ∇p + µ∇2V+ ρg β(T-T∞)i
Energy conservation:
ρcp (V. ∇)T = ∇.(k∇T)
![Page 16: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/16.jpg)
Sammakia 4-06
![Page 17: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/17.jpg)
Sammakia 4-06
•Navier Stokes equations fairly complex to solve
•Most practical applications require a numerical solution
•Several commercial codes are available, provide good design tools
•It is possible to solve conjugate conduction/convection./radiation problems
Thermal management in a second level package…cont.
FLOTHERM (TM)
![Page 18: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/18.jpg)
Sammakia 4-06
diffuser ducts
computer equipment racks
return vents for hot exhaust air(on parallel walls)
cold aisles(chilled air supply)
13.42 m long
6.05 m wide
diffuser ducts
computer equipment racks
return vents for hot exhaust air(on parallel walls)
cold aisles(chilled air supply)
13.42 m long
6.05 m wide
![Page 19: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/19.jpg)
Sammakia 4-06
z=0.8m
z=6.5m
z=12m
z=16m
y
x
z
z=20m
Most Racks ~19 kW
z=0.8m
z=6.5m
z=12m
z=16m
y
x
z
y
x
z
z=20m
Most Racks ~19 kW
![Page 20: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/20.jpg)
Sammakia 4-06
On the other hand there are very interesting small scale problems at the micro level; Example of micro-channel
cooling
![Page 21: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/21.jpg)
Sammakia 4-06
Channels in Perpendicular DirectionTemperature Distribution
Fluid flow direction
Fluid f
low di
rectio
n
![Page 22: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/22.jpg)
Sammakia 4-06
Temperature at various cross-sections along the length
![Page 23: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/23.jpg)
Sammakia 4-06
Variation of Maximum Temperature with Velocity(Single Channel with Adiabatic BCs)
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.00
20
40
60
80
100
120
140
160
Chi^2/DoF = 2.77172R^2 = 0.99924 y0 31.89508 ±1.50026A1 224.53191 ±16.14905t1 0.03871 ±0.00338A2 41.0406 ±3.37751t2 0.62888 ±0.12918
y0 + A1e^(-x/t1) + A2e^(-x/t2)
Simulated Data Second order exponential decay
Tem
pera
ture
(o C)
Velocity (m/s)
![Page 24: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/24.jpg)
Sammakia 4-06
Variation of Pressure Drop with Velocity(Single Channel with Adiabatic BCs)
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
0
4000
8000
12000
16000
20000
24000
28000P
ress
ure
(Pa)
Velocity (m/s)
B Polynomial Fit of Data2_B
Y = A + B1*X + B2*X^2Parameter Value Error------------------------------------------------------------A -30.44094 18.76507B1 4372.04107 37.73392B2 630.1282 9.51187
![Page 25: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/25.jpg)
Sammakia 4-06
•Conduction (relatively simple analysis, will introduce today)
•Convection (mostly empirical and numerical)•Radiation (often negligible
at low operating temperatures)•Multimode (combinations of the above modes)
Modes of heat transfer
![Page 26: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/26.jpg)
Sammakia 4-06
Example using thermal grease as the interface material
![Page 27: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/27.jpg)
Sammakia 4-06
Thermal grease in a ceramic single chip package
Without grease
Rint = 10 C/WWith grease
Rint = 3.5 C/W
Why not use adhesive ?
![Page 28: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/28.jpg)
Sammakia 4-06
AirAir
Air
Rcap-air
Rcard-air1
Rcard-air2
![Page 29: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/29.jpg)
Sammakia 4-06
Resistance Equation Value oC/W
Spreading in Si Rj-c = ln(ro-ri)/2 π kt 0.6
Through a solder joint Rc4 = l/kA (Assume all solder joints conduct in parallel)
1.1
Spreading in the substrate Rsubstrate= ln(ro-ri)/2 π kt 6.4
Through a copper pin Rpin = l/kA 0.0
Spreading in the card Rcard= ln(ro-ri)/2π kt 1.8
Convection to air Rcap-air = 1/hA 5.0
Convection to air Rcard-air1= 1/hA 30.0
without grease
Rint = 10.7; Rext = 4.8
Rtotal = 15
![Page 30: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/30.jpg)
Sammakia 4-06
AirAir
Air
Rcap-air
Rcard-air1
Rcard-air2
![Page 31: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/31.jpg)
Sammakia 4-06
Resistance Equation Value oC/W
Thermal grease resistance Rgrease = l/kA 2 to 4
With grease
Rint = 2.5; Rext = 5.2
Rtotal = 7.7
![Page 32: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/32.jpg)
Sammakia 4-06
Example using an adhesive as a thermal interface material
![Page 33: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/33.jpg)
Sammakia 4-06
CHIP
ENCAPSULANT
HEAT SINKTHERMALADHESIVE
STIFFENER
BGA C4s
PRINTED CIRCUIT BOARD
ORGANIC SUBSTRATEPower planes
![Page 34: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/34.jpg)
Sammakia 4-06
Heat sink resistance (top) Rhs
Adhesive resistance Radh
Chip(heat source) Rchip
C4 resistance Rc4Substrate resistance Rsubst.
BGA resistance RBGA
Card spreading resistance Rspr
Heat sink resistance (legs) Rhsl
Convective resistance or external resistance REXT
Air
Air
Air
Rint = 0.5 to 1.5 C/W
![Page 35: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/35.jpg)
Sammakia 4-06
Heat sink resistance (top) Rhs
Chip(heat source) Rchip
C4 resistance Rc4Substrate resistance Rsubst.BGA resistance RBGA
Card spreading resistance Rspr
Heat sink resistance (legs) Rhsl
Convective resistance or external resistance REXT
Air
Air
Air
Rint = 3 to 9 C/W
![Page 36: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/36.jpg)
Sammakia 4-06
Thermal Resistances of Electronic Packages
• A number of resistances are used, often poorly defined.
Junction-to-case:
Case-to-ambient:
Junction-to-ambient:
Problems: Measurement location, substrate conduction, ambient fluid properties, flow regime, accounting of systemboundaries.
RT T
qjcj c=−( )
R T Tqca
c a= −( )
RT T
qjaj a=−( )
![Page 37: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/37.jpg)
Sammakia 4-06
Other resistances that need to be added:• Interfaces (interfacial voids and defects)
• Spreading (bottlenecks)
![Page 38: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/38.jpg)
Sammakia 4-06
Contact Resistance
T1
T2
∆T
xct q
TR ∆=,
(K/W)
xct q
TR′′
∆=′′, (m2K/W)
ctR ,′′ : available from tables
Depends upon: contact surface materials,interface pressure, interfacial material
xq
Line ofcontact
![Page 39: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/39.jpg)
Sammakia 4-06
Conduction Spreading Resistance
Near the chip, the conduction is 2 or 3-D. Need to solve heat diffusion equation exactly to get Rth. For many cases this can be done in closed form (if chip approximated as uniform heat flux circular source)
W
rab r r
z z z(a) (b) (c)
akHRth π
= ⎟⎠⎞
⎜⎝⎛
bw
baH , Available from charts
adiabatic boundary
![Page 40: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/40.jpg)
Sammakia 4-06
Thermal and Mechanical designs are intertwined
![Page 41: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/41.jpg)
Sammakia 4-06
• During every thermal cycle interconnections must ‘absorb’ the CTE mismatch
• They must be designed to survive (at an acceptable failure rate) through end of life of the product
![Page 42: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/42.jpg)
Sammakia 4-06
Underfill or encapsulation
Converts some of the shear loading to bending
![Page 43: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/43.jpg)
Sammakia 4-06
• Chip not mechanically coupled(strongly) to chip carrier
+
• Long slender wire bonds = excellent fatigue life
Soft interface
![Page 44: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/44.jpg)
Sammakia 4-06
Thermal grease provides a flexible heat transfer path, (phase change, low modulus materials, etc…)
![Page 45: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/45.jpg)
Sammakia 4-06
0
20
40
60
80
Inva
r
Cu
Inva
rC
u
Kov
ar Fe Al
Fr-4
InvarSiliconCu Invar CuAl203KovarQuartzFeCuAlsolderFr-4Adhesives
CTE value for different packaging materials, PPM/Degree K.
![Page 46: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/46.jpg)
Sammakia 4-06
At room temperature
At elevated
temperature
At room temperature
Fundamentals of Electronics Packaging; B. Sammakia
![Page 47: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/47.jpg)
Sammakia 4-06
Additional examples from actual systems
![Page 48: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/48.jpg)
Sammakia 4-06
![Page 49: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/49.jpg)
Sammakia 4-06
Chapter 12 Figure 3b
11.85.33.7Module heat flux (W/cm2)
643319Chip heat flux (W/cm2)
1.87.711.6Rint (oC/W)
2000600300Max module power (W)
2774Max chip power (W)
199019851980Year
ES9000ES/30903081IBM system
Table 1. Showing the relative incremental improvements made to the TCM, from Simons (1995).
![Page 50: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/50.jpg)
Sammakia 4-06
![Page 51: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/51.jpg)
Sammakia 4-06
![Page 52: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/52.jpg)
Sammakia 4-06
Nozzle
Incoming air
Impingement
heat sink
Ceramic cap
Ceramicsubstrate
Thermalgrease
Chapter 12 Figure 2 Schematic diagram of the IBM 4381
![Page 53: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/53.jpg)
Sammakia 4-06
![Page 54: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/54.jpg)
Sammakia 4-06
![Page 55: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/55.jpg)
Sammakia 4-06
![Page 56: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/56.jpg)
Sammakia 4-06
fluorocarbon liquid, FC-77, under single phase forced convection conditions. The flow velocity is about 1 m/s over the single chip packages.
Chapter 12 Figure 8 Cray 2 system
fluorocarbon liquid, FC-77
![Page 57: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/57.jpg)
Sammakia 4-06
Bellows provides mechanical spring
![Page 58: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/58.jpg)
Sammakia 4-06
Flex provides mechanical spring
![Page 59: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/59.jpg)
Sammakia 4-06
![Page 60: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/60.jpg)
Sammakia 4-06
![Page 61: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/61.jpg)
Sammakia 4-06
•In all of the designs shown here there is a flexible part of thesystem designed to protect the interconnects at the chip level.
•Examples: pistons, bellows and springs (weakly coupled to the chip)
•Grease: allows the chip and heat-sink to expand independently
•Flexible chip carrier: the chip carrier deforms and reduces the stresses on the interconnect
![Page 62: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/62.jpg)
Sammakia 4-06
Gas gap/Spring/Thermal grease/Oil
Wire bond/TAB/Solder Bumps with Under fill
High modulus adhesive
Metal heat sink
Metal heat sink
Substrate
Solder interconnections
(no underfill)
IBM TCM (308X,309X,ES9000)
IBM 4381
Hitachi M680
Mitsubishi high thermal conduction module
Fujitsu bellows system
VAX 9000
NECSX3
Substrate
![Page 63: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/63.jpg)
Sammakia 4-06
Uses Bellows and water impingement cooling0.56 total
304600Fujitsu VP 2000
Uses direct liquid immersion cooling. 600-700Cray 2
Chips backbonded to heat spreader using diamond paste. TAB bonding reduced mechanical stresses.
30 at chip level
VAX 9000
Liquid cooling utilizing micro channels in substrate
0.52.88.44.215.1377NTT
Water cooling, copper pistons touching chips.272000IBM ES 9000
Water cooling, aluminum pistons touching chips.1.57.20.42.27500IBM 3090
Air cooling, impingement heat sink. Ceramic cap and thermal grease reduce stress
890.52.23.890IBM 4381
Water cooling, studs touching chips.Total5
0.31.6>5.4250NEC SX LCM
Water cooled.Total60
0.20.9>0.560Honeywell SLIC
Air cooling, CTE matching by using SiC heat spreader
24.610.10.50.816Hitachi RAM
Thin air gap between cap and heat spreader on the chip. This reduces the stresses.
4.330.40.83436Mitsubishi HTCM
RextRintQ”’Q”QP
Thermal and Mechanical design featuresThermal Characteristics Technology
Where P = total module power, W Q = Max chip power, W Q” = heat flux, W/cm2 Q”’ = Heat density, W/cm3
![Page 64: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/64.jpg)
Sammakia 4-06
Future flexible electronic systems that are completely integrated can be
‘wrapped’ around heat-sinks and cold plates for maximum thermal
performance and reliability
![Page 65: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/65.jpg)
Sammakia 4-06
References:
•Allen, E., Donohue, B. and Pei, H. (1987), “Cooling the VAX 8000 Family of Computers - An Overview,” Proc. of the Technical Conf., Seventh Annual Intl. Electronic Packaging Society Conf., v. 2, held in Boston, MA, pp. 712-717.•Bar-Cohen, A. (1987), “Thermal Management of Air- and Liquid Cooled Multi-Chip Modules,” IEEE Trans. Components, Hybrids and Manufacturing Technology, v. CHMT-10, no. 2, pp. 159-175. •Bar-Cohen, A. (1988), “An Addendum and Correction to Thermal Management of Air- and Liquid-Cooled Multi-Chip Modules,” IEEE Trans. Components, Hybrids and Manufacturing Technology, v. CHMT-11, no. 3, pp. 333-334.•Biskeborn, R.G., Horvath, J.L. and Hultmark, E.B. (1984), “Integral Cap Heat Sink Assembly for the IBM 4381 Processor,” Proc. of the Technical Conf., Fourth Annual Intl. Electronic Packaging Society Conf., held in Baltimore, MD (October 29-31, 1984), pp. 468-474.•Carlson, D.M., (1994), “Cray J90 Computer System Air-Cooled Supercomputer Packaging,” Proc. of the Technical Program, 1994 Intl. Electronics Packaging Conf., Atlanta, GA (September 25-28, 1999), pp. 708-721.•Chu, R.C., Hwang, U.P. and Simons, R.E. (1982), “Conduction Cooling for an LSI Package - A One-Dimensional Approach,” IBM J. of Research and Development, v. 26, no. 1, pp. 45-54.•Cray, S. R. (1986), “Immersion Cooled High Density Electronic Assembly,” U. S. Patent 4,590,538 (May, 1986).•Danielson, R.D., Krajewski, N. and Brost, J. (1986), “Cooling a Superfast Computer,” Electronic Packaging and Production, (July, 1986), pp. 44-45.•Emoto, Y, Tsuchiya, M., Ogiwara, S., Sasaki, T., Kobayashi, F.and Otsuka, K. (1986), “A High Performance Package Approach on 1st Level Packaging For Main Frame,” Proc. of the 36th Electronic Components Conf., Organized by the IEEE Components, Hybrids, and Manufacturing Technology, held in Seattle, WA (May 5-7, 1986), pp. 564-570.•.‘National Technology Roadmap for Semiconductors: Technology needs’, 1999, http://notes.sematech.org/PublNTRS.nsf/home.htm .•.”The Electronics Industry Report”, Prismark partners annual report, 1998-99.
![Page 66: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/66.jpg)
Sammakia 4-06
•Fitch, J.S. (1990), “A One-Dimensional Thermal Model for the VAX 9000 Multi-Chip Units,” in Thermal Modeling and Design of Electronic Systems and Devices, R. A. Wirtz and G. L. Lehman, (editors), presented at the ASME Winter Annual Meeting, Dallas, TX (November 25-30, 1990), American Society of Mechanical Engineers, New York, NY, HTD-Vol. 153, pp. 59-64.•Gani, L., Graf, M.C., Rizzolo, R.F. and Washburn, W.F. (1991), “IBM Enterprise System/9000 Type 9121 Model 320 Air-Cooled Processor Technology,” IBM J. of Research and Development, v. 35, no. 3, pp. 342-351.•Hopper, S., Edwards, D.L. and Young, S.P. (1992), “The Thermal Management of IBM's ES/9000 Advanced Thermal Conduction Module,” Proc. of the 42nd Electronic Components and Technogy Conf., Organized by IEEE Soc. on Components, Hybrids and Manufacturing Technology, held in San Diego, CA (May 18-20, 1992), pp. 997-1001.•Kaneko, K. Seyama, K. and Suzuki, M. (1990), “LSI Packaging and Cooling Technologies for Fujitsu VP2000 Series,”, Fujitsu Scientific & Technology J., v. 41, no. 1, pp. 12-19.•Kalita, B. and English, W. (1985), “Cooling the VAX 8600 Processor,” Digital Technical Journal, no. 1, (August 1985).•Kaneko, K., Kuwabara, K., Kikuchi, S. and Kano, T. (1991), “Hardware Technology for Fujitsu VP2000 Series,” Fujitsu Scientific & Technology J., v. 37, no. 2, pp. 158-168.•Knickerbocker, J.U., Leung, G.B., Miller, W.R., Young, S.P., Sands, S.A. and Indyk, R.F. (1991), “IBM System/390 Air-Cooled Alumina Thermal Conduction Module,” IBM J. of Research and Development, v. 35, no. 3, pp. 330-341.•Kobayashi, F., Anzai, A., Yamada, M., Takahashi, A., Yamazaki, S. and Toda, G.,(1986), “Packaging Technologies for the Ultrahigh-Speed Processor Hitachi M-680 H/M-682 H,” Proc. of the 36th Electronic Components Conf., Organized by the IEEE Components, Hybrids, and Manufacturing Technology, held in Seattle, WA (May 5-7, 1986), pp. 571-577.•Kohara, M., Nakao, S, Tsutsumi, K., Shibata, H., and Nakata, H. (1983), “High thermal conduction package technology for for flip chip devices,” IEEE Trans. Components, Hybrids, Manuf. Technology, Vol. CHMT-6, pp. 267-271.•Lyman, (1982), “Special Report - Supercomputers Demand Innovation in Packaging and Cooling,” Electronics, (September 22, 1982), pp. 136-142.•McElroy, J. (1984), “Packaging of a High Performance VAX,” Proc. of the Intl. Electronic Packaging Soc. Conf.,•McElroy, J. (1985), “Packaging the VAX8600 Processor,” Digital Technical Journal, no. 1, (August 1985).•McPhee, M., O'Toole, T.S. and Yedvabny, M. (1990), “Cooling The VAX 9000,” Electro/90, Conference Record, pp. 288-292, Boston, MA (May 9-11, 1990).•Mizuno, T., Okano,M., Matsuo, Y. and Watari, T. (1987), “Cooling Technology for the NEC SX Supercomputers,” Proc. of the Intl. Symposium on Cooling Technology for Electronic Equipment, Hawaii, pp. 110-125.
![Page 67: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/67.jpg)
Sammakia 4-06
•Okutani, K., Otsuka, K., Sahara, K. and Satoh, K. (1984), “Packaging Design of a SiC Ceramic Multi-Chip RAM Module,”Proc. of the Technical Conf., Fourth Annual Intl. Electronic Packaging Society Conf., held in Baltimore, MD (October 29-31, 1984), pp. 299-304.•Pei, J., Heng, S., Charlantini, R., and Gildea, P. (1990), “Cooling Components Used in VAX 9000 Family of Computers,”Proc. of the Technical Conf. 1990 Intl. Electronics Packaging Conf., (Marlborough, MA, September 10-12, 1990), pp. 587-601.•Sechler, R. F. (1993), “RISC System/6000 Central Processing Unit,” Proc. of the Intl. Conf. & Exhibition on MultichipModules, (Denver, CO 14-16 April, 1993), SPIE vol. 1986, pp. 22-27.•Simons, Robert, E. (1995), “The evolution of IBM high performance cooling technology,” IEEE Transactions on Components, Packaging and Manufacturing Technology-Part A, Vol. 18, No. 4. •Watari, T. and Murano, H. (1985), “Packaging Technology for NEC SX Supercomputer,” Proc. of the 1985 IEEE Electronic Component Conference, organized by IEEE Components, Hybrids, and Manufacturing Technology, pp. 192-198.•Werbizky, G.G. and Haining, F.W. (1985), “Circuit packaging for large scale integration”, in Proc. IEEE Electronic Component Conf., pp. 187-191.•Yamamoto, Udagawa, Y. and Okada, T. (1986), “Cooling and Packaging for FACOM M-780,” Fujitsu, v. 37, no. 2, pp. 124-134.•Yamamoto, Udagawa, Y. and Suzuki, M. (1987), “Cooling System for FACOM M-780 Large-Scale Computer,” Proc. of the Intl. Symposium on Cooling Technology for Electronic Equipment, Hawaii, pp. 110-125.•.T.M.Niu, Bahgat Sammakia and Sanjeev Sathe “Void effect modeling of flip chip encapsulation on ceramic substrates”, Transactions of the ASME, IMECE 1997, Seattle WA•.P. Totta, S. Khadpe, N. Koopman, T. Reilly, M. Sheaffer, “Chip to Package Interconnections,” Chap. 8 of Microelectronics Packaging Handbook, Part II, ed. Rao Tummala, Eugene J. Rymaszewski, Alan G. Klopfenstein, 2nd ed., Chapman & Hall 1997.•.D. Suryanarayana, R. Hsiao, T.P. Gall, J.M. McCreary, “Flip-Chip Solder Bump Fatigue Enhanced by Polymer Encapsulation,” IEEE Trans. of Components and Hybrid Manufacturing Technology, Vol. 14, No. 1, 1991, p. 218.•.G. Moore, “Cramming More Components onto Integrated Circuits,” Electronics Magazine, Vol. 38, No. 8, April 19, 1965, p. 114.•.Schaller, R.R. “Moore’s Law: Past, Present and Future,” IEEE Spectrum, Vol. 34, No. 6, June 1997, p. 52.•.Chu, R. C. (1986), "Heat Transfer in Electronic Systems," Heat Transfer - 1986, Proc. of the 8th Intl. Heat Transfer Conf., held in San Francisco, Hemisphere Publishing Co., Washington, DC, v. I, pp. 293-305.•.Bar-Cohen, (1987), "Thermal Management of Air- and Liquid Cooled Multi-Chip Modules," IEEE Trans. Components, Hybrids and Manufacturing Technology, v. CHMT-10, no. 2, pp. 159-175.
![Page 68: Thermal Management of Flexible Electronic Systemspeople.ccmr.cornell.edu/~cober/mse542/page2/files/cornellthermal... · Thermal Management of Flexible Electronic Systems ... Fundamentals](https://reader036.vdocuments.us/reader036/viewer/2022062413/5a8799207f8b9a14748d9a0f/html5/thumbnails/68.jpg)
Sammakia 4-06
•.Chu, R. C. and R. E. Simons, (1990), "Review of Thermal Design for Multi-Chip Modules," Proc. of the Technical Program, pp. 1633-1642, NEPCON-WEST, National Electronic Packaging and Production Conf., Anaheim, CA (February 26 - March 1, 1990).•Pei, J., Heng, S., Charlantini, R., and Gildea, P., (1990), “Cooling Components Used in VAX 9000 Family of Computers,” Proc. of the Technical Conf. 1990 Intl. Electronics Packaging Conf., (Marlborough, MA, September 10-12, 1990), pp. 587-601.•Oktay, S. and Kammerer, H.C. (1982), “A Conduction Cooled Module for High Performance LSI Devices,” IBM J. of Research and Development, v. 26, no. 1, pp. 55-66.•Oktay, S., Dessauer, B. and Horvath, J.L. (1983), “New Internal and External Cooling Enhancements for the Air-Cooled IBM 4381 Module,” ICCD '83, Proc. of the IEEE Intl. Conf. on Computer Design: VLSI in Computers, held in Port Chester, NJ (November 1, 1983). •Han and Guo,"Thermal Deformation Analysis of Various Electronic Packaging Products by Moire and Microscopic MoireInterferometry," Journal of Electronic packaging, Transaction of the ASME,Vol. 117, pp. 185-191, 1995. •Guo, Lim, Chen and Woychik,"Solder Ball Connect (SBC) Assemblies under Thermal Loading: I. Deformation Measurement via Moire Interferometry, and Its Interpretation," IBM Journal of Research and Development, Vol. 37, No. 5, pp. 635-648, 1993. Choi, Guo, LaFontaine, and Lim, "Solder Ball Connect (SBC) Assemblies under Thermal Loading: II. Strain Analysis via Image,Processing, and Reliability Considerations," IBM Journal of Research and Development, Vol. 37, No. 5,pp. 649-659, 1993. •Y. Joshi, “Thermal management in electronic packages”, professional course presented at ITherm 2002, San Diego.