thermal imaging using temperature sensitive paint · 2013. 12. 3. · high speed thermal imaging...
TRANSCRIPT
-
Thermal Imaging using Temperature Sensitive Paint
T. Tsukamoto, M. Esashi and S. Tanaka
Tohoku University
-
Thermal Imaging methods using TSPThermal imaging
High speed thermal imaging using TSP Low cost TSP + CCD camera + UV illumination → important for real applicationsHigh magnification … microscope for visible lightHigh speed thermal imaging … using UV flash method
TSPEu(TTA)3 + PVB
Excitation(355 nm)
Luminescence(610 nm)
Intensity of luminescencefrom the TSPCCD
camera
Measure the temperature distribution Health care Military Evaluation of microdevices.
TSP = Temperature Sensitive PaintIR-to-visible converter array
TSPIR absorber
CCD camera
Incident IR is converted to the temperaturerise of TSP microstructures.Read out by the CCD camera.
-
High speed thermal imaging using UV flashing method
Heating power
Temperature
UV illumination
Intensity of the luminescence
time∆t
Shutter
Filter (610 nm)
CCD camera
Microscope
PC
pulse generator
Heating signal
Shuttertrigger
Image data
TriggerUV-LED
Device under test
(355nm)
-
Thermal images0.0 ms 40.0 ms10.0 ms
50.0 ms 70.0 ms
500µm
Heater
Temporal resolution : 0.2 msSpatial resolution : 39 µm
-
Thermal imaging using IR-to-visible convertor
IR absorber
TSP Glass
Pixel
UV
Luminescence
IR
Thermal image
Projected image of a heater
Self-suspende microstructuresare heated by an incident IR.
Temperature of the microstructuresare read by an optical way using TSP
Easy to fabricate.Thermal resistance of each pixel is higher than that of conventional bolometers. → Sensitivity can be increased.
Experimental setup
CCDcamera
Filter
Vacuum chamber
Ge lens
Heater(observationobject)
UV-LED
ページ 1ページ 2ページ 3ページ 4ページ 5