#themh21 – mirror head 21 christie boxer series · 2018-06-19 · christie boxer series 1 / 3...

3
Copyright © 2014 - 2018 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. MH21 product data sheet - as of June 2018 - #TheMH21 – Mirror Head 21 Christie Boxer Series 1/3 #TheMH21 – A tool the industry has been waiting for. – You can now align and move projection positions and create fascinating shows with 3-chip DLP projectors by Christie Boxer Series, like the Boxer 4K30, 2K30 and many more. Use your projectors to their full potential. – #TheMH21 is the pair of wings for your projector. Now you can easily move projection positions to reach more surfaces and project bright and colourful content across an entire room. Optimized for professional show integrators. – You can easily mount the base plate to any Mirror Head 21 compatible projector. Once mounted, your projector is ready for #TheMH21. Ideal for rental and touring. – #TheMH21 is 100% stack frame compatible with a quick, easy and secure mounting done in less than a minute while you are on the road. It is important to note. – #TheMH21 has been designed and is produced in Austria to ensure a high-level of performance. Dynamic Projection Institute has designed this powerful tool to operate at industry-levels of efficiency and we guarantee accurate projection positioning.

Upload: others

Post on 13-Aug-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: #TheMH21 – Mirror Head 21 Christie Boxer Series · 2018-06-19 · Christie Boxer Series 1 / 3 #TheMH21 – A tool the industry has been waiting for. – You can now align and move

Copyright © 2014 - 2018 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.comWeights and dimensions shown are approximate. Specifi cations and appearance are subject to change without notice.

MH21 product data sheet - as of June 2018 -

#TheMH21 – Mirror Head 21Christie Boxer Series

1 / 3

#TheMH21 – A tool the industry has been waiting for. – You can now align and move projection positions and create fascinating shows with 3-chip DLP projectors by Christie Boxer Series, like the Boxer 4K30, 2K30 and many more.

Use your projectors to their full potential. – #TheMH21 is the pair of wings for your projector. Now you can easily move projection positions to reach more surfaces and project bright and colourful content across an entire room.

Optimized for professional show integrators. – You can easily mount the base plate to any Mirror Head 21 compatible projector. Once mounted, your projector is ready for #TheMH21.

Ideal for rental and touring. – #TheMH21 is 100% stack frame compatible with a quick, easy and secure mounting done in less than a minute while you are on the road.

It is important to note. – #TheMH21 has been designed and is produced in Austria to ensure a high-level of performance. Dynamic Projection Institute has designed this powerful tool to operate at industry-levels of ef� ciency and we guarantee accurate projection positioning.

Page 2: #TheMH21 – Mirror Head 21 Christie Boxer Series · 2018-06-19 · Christie Boxer Series 1 / 3 #TheMH21 – A tool the industry has been waiting for. – You can now align and move

Copyright © 2014 - 2018 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.comWeights and dimensions shown are approximate. Specifi cations and appearance are subject to change without notice.

MH21 product data sheet - as of June 2018 -

594

212

1428

239

646

332

494

287

Figure with LANG frame for CHRISTIE BOXER Figure with CHRISTIE BOXER rigging frameFigure with Baseplate

SPECIFICATIONS MIRROR HEAD 21 WITH CHRISTIE BOXER 4K30

MECHANICAL SPECIFICATIONS WITH Boxer 4K30

Fixture dimensions (W / D / H) 1428 x 594 x 332 mmFixture total 81.5 kg Projector 4K30 (excl. lens) 73 kgMirror Head 21 8.5 kg

Caution ! There are no user serviceable parts (fuse) inside this unit.

PROJECTOR COMPATIBILITY

Christie Boxer 3DLP projectors in 2K and 4K:Boxer 2K20 2K (2048 x 1080) / 19,500 ANSI Boxer 2K30 2K (2048 x 1080) / 29,000 ANSI Boxer 4K20 4K (4096 x 2160) / 19,500 ANSI Boxer 4K30 4K (4096 x 2160) / 29,000 ANSI

IMPORTANT NOTE: For information about the speci� cations, operations and use of the projector carefully read the instruction manual of your projector. https://www.christiedigital.com/emea/business/prod-ucts/projectors/3-chip-dlp/boxer-series

CAUTION: For the use of closed-type riggings such as half-coupler clamps secure the � xture with a safety ca-ble (or other secondary attachments) that is approved for the weight of the � xture, so that the safety cable will hold the � xture if the primary attachment fails.

2 / 3

LENS COMPATIBILITY LIST / FOR CHRISTIE BOXER SERIESNOTE: Due to optical reasons we do not recommend this lens below a throw ratio of 1.6.(++) To be compatible use the Mirror Head Lens Extension MHZ-LE8

Art.Nr. 144 - …

… 105107-XX … 106108-XX … 107109-XX … 108100-XX (++) … 109101-XX (++)

T.R.HB Zoom Lens

1.63 - 2.17:1HB Zoom Lens

1.99 - 2.71:1HB Zoom Lens

2.71 - 3.89:1HB Zoom Lens

3.89 - 5.43:1HB Zoom Lens

4.96 - 7.69:1

Figure with baseplate Figure with LANG frame

for CHRISTIE BOXERFigure with CHRISTIE BOXER rigging frame

ELECTRICAL SPECIFICATIONS

INPUT POWER 100-240V / 2-1A / 50-60Hz, Max. 10A (3-prong C14 male socket)

POWER CONSUMPTION Max. 17W Standby mode 3W

Page 3: #TheMH21 – Mirror Head 21 Christie Boxer Series · 2018-06-19 · Christie Boxer Series 1 / 3 #TheMH21 – A tool the industry has been waiting for. – You can now align and move

Copyright © 2014 - 2018 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.comWeights and dimensions shown are approximate. Specifi cations and appearance are subject to change without notice.

MH21 product data sheet - as of June 2018 -

ITEM NUMBER: MH21

• Package dimensions (W / D / H): 650 x 375 x 370 mm• Package weight: 11.5 kg• Package includes: Manual, Mirror Head unit, RS232 cable,

A / C power cable, Mounting screws and spacers, Loctite screw lock, Metric Hex key 2 mm and 5 mm

To protect the environment, please try to recycle the packing

material as much as possible.

MIRROR HEAD SPECIFICATIONS / FEATURES

• High resolution 16bit Pan / Tilt mirror movement• DMX-512 control over 14 DMX channels• DMX-IN and DMX-OUT / Through port

(5-pin male and female XLR connectors)• 14 DMX channels are required to control the unit• Art-Net™ connection (RJ45) (Art-Net™ designed by

and Copyright Artistic License Holdings Ltd.)• High resolution micro step motors with maintenance

free direct drive• Self calibrating mirror position for high accuracy• Absolute reposition accuracy smaller than 0.03°• Movement accuracy: Pan and Tilt from the same direction to the

programmed point within approximately 0.01°• RS232 remote control connection for projector (D-sub 9 male)

- cable included• Flash-able � rmware (Mini USB OTG)• High resolution LED-Display for easy con� guration• LED-Display back-light auto turn off for energy saving• LED-Display Flip / Flop mode for easy reading in dif� cult positions• Coated mirror for optimum re� ection ~98% refraction factor• Optimized mirror optics for the speci� c projector• Passive cooled system (excluding projector)• Environmental tolerances: Ambient operating temperature

range: 5° – 35°C, Humidity: 20% – 80% (non-condensing)• Quick, secure and easy snap-in mounting• Anodized light metal construction

Control unit / MHE01

Elektronik Frontansicht komplett

all rights reserved by www.dynamicprojection.com

25.08.14Neumann

GEWICHT:

A3

BLATT 1 VON 1MASSSTAB 1:1

ZEICHNUNGSNR.

BENENNUNG:

ÄNDERUNGZEICHNUNG NICHT SKALIEREN

WERKSTOFF:

DATUMSIGNATURNAME

ENTGRATENUND SCHARFEKANTENBRECHEN

OBERFLÄCHENGÜTE:WENN NICHT ANDERS DEFINIERT:BEMASSUNGEN SIND IN MILLIMETEROBERFLÄCHENBESCHAFFENHEIT:TOLERANZEN: LINEAR: WINKEL:

QUALITÄT

PRODUKTION

GENEHMIGT

GEPRÜFT

GEZEICHNET

DMX OUT DMX IN ARTNET / LAN

RS 232

MENUENTER

AC OUT AC IN

Mirr

or H

ead

Mod

el: M

HE0

1

3 / 3

580,

4

210,5

MH21 Baseplate part 1

15 50

580,

4

15

MH21 Baseplate part 2MH21 base plate part 1

MH21 base plate part 2

365

516 272

287

212

159

89