TEL: +1-562-802-8834 • FAX: +1-562-921-7363INTERNET: www.polycoatusa.com

E-MAIL: coatings@polycoatusa.com

CALIFORNIA14722 Spring Avenue

Santa Fe Springs, CA 90670-5108 USA

TEXAS2100 Reliance Parkway

Bedford, TX 76021-6122 USA

Theme and Prop

Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Polyeuro® MH 752 3700 +/- 200 40 +/- 20 450 +/-50 75 +/-5DPolyeuro® MH 752 FR 1700 +/- 200 10 +/- 5 350 +/-50 75 +/-5DPolyeuro® MH 752 HH 4000 +/- 200 20 +/- 5 450 +/-50 75 +/-5D

Specialty Polyurea*

Our unique coatings offer an impact resistant shell that isspray-applied to add a durable, abrasion resistant finish to

most lightweight foams, expanded polystyrene, and mostother lightweight substrates.

The TuffShield™ series offers 100% solids flexible two component high performance spray elastomers designed to give exceptional values including tensile, high tear, high chemical and impact resistance in severe demanding applications against abrasion and corrosion andhydro carbons. PolyEuro® 8245 gives excellent high acid and base resistance.

*Provisional Data

Perfecting Polurea and Polyurethane Chemistry.

Copyright 2009 by Polycoat Products All RightsReserved

Reproduction of the information in this document, either as a whole or in part, is forbidden unless written permission has been obtained.

c

Theme ParkTaiwan

Concrete WeightsSantiago, Chile

Polycoat Products has been a leading manufacturer of highperformance, Polyurea and Polyurethane coatings for overthree decades. Polycoat's strong leadership, pioneeringtechnology, and innovation have resulted in some of themost patented coating applications in the industry. Withour strong R&D, modernized manufacturing plant, andquality control, we market a wide variety of proprietary sin-gle-plural component, Aromatic-Aliphatic polyurea-polyurethane (PU-PUR) coatings. Complete coating sys-tems to protect and waterproof many different types ofsubstrates running the gamut of harsh environmental andservice conditions.

The Polyeuro® series consists of 100% solids, fast-setting,plural component elastomaric Polyurea and Polyurethanecoatings. The series includes Aliphatic, Aromatic andHybrids systems which are spray-applied using either aHigh or Low pressure Plural component spray machinewith impingement mixing. The extremely quick gel timemakes the Polyeuro® family suitable for applications intemperature as low as -20°F. These coatings have beenused extensively in various industrial, marine, mining andcommercial applications including as a protective lining inship cargo holds, secondary containments, clarifier tanks,potable water tanks, and on warehouse floors, decks, bal-conies, automobile showrooms, Prop and Theme Industry,Movie sets, steel-concrete bridges, lead encapsulations,structure steel, bridges, and more.

The Poly-Caulk® series comprises the line of our 100%solids, self-leveling, Polyurea and Polyurethane caulking

compounds for a wide variety of applications such as inte-rior-exterior concrete control joints or repairing randomcracks. It provides application-specific products like Poly-Caulk® JF for Jet Fuel Resistance and general purposecaulking compounds.

Our Staingard series embodies the properties ofPolyaspartic Polyurea technology, meeting the demands forsuperior color and gloss retention, as well as durabilityagainst weathering and abrasion resistance.

The harsh demands of industrial environments todayincluding high-abrasion, impact and hydro carbon resist-ance are met by TuffShield™ systems. These tough, thoughflexible 100% solids, spray elastomaric systems provideexceptional hydrolytic stability, excellent abrasion, tear andimpact values.

Today, Polycoat's products are used in a variety of climatesof Alaska's North Slopes to Hawaii's tropical weather, frommines in South America to the Siberian tundra, as well asin many other parts of world such as Australia-NewZealand, South East Asia, Europe, and the Middle East.Polycoat's technical staff and team of representatives arejust a phone call away to offer guidance and assistance onyour next project.

Please visit our website http://www.polycoatusa.com forcomplete information or call us to access our extensiveproduct line. We appreciate your business and strive toserve you in the most efficient manner.

POLYEURO®, POLY-CAULK®,TUFFSHIELD™ and POLYASPARTICS

High Performance, Spray Applied, Elastomeric Coatings for Industrial Applications,Secondary Containments and Waterproofing

Product Tensile Elongation Tear Hardness Abrasion Resistance(psi) (%) (pli) (Shore) (Wt Loss)

TuffShieldTM 801 3800 +/- 500 375 +/- 50 425 +/-50 50 +/- 5 D 7.1 mg on CS 17 wheelTuffShieldTM HAR 3200 +/- 300 275 +/- 50 350 +/-25 42 +/- 3 D 39 mg on H-18 wheelTuffShieldTM RH 3000 +/- 200 100 +/- 20 N/A 65 +/- 5 D N/APolyeuro® 8245 2000 +/- 200 100 +/- 20 200 +/-20 50 +/- 5 D N/A

Polycoat-Staingard - 6072 Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Clear 2500 +/- 200 100 +/- 25 300 +/-50 50 +/- 5 DPigmented 2300 +/- 300 50 +/- 25 225 +/-35 50 +/- 5 D

Polycoat-Staingard - 6000 Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Clear 3000 +/- 200 70 +/- 10 400 +/-30 65 +/- 2 DPigmented 2600 +/- 200 30 +/- 10 375 +/-50 65 +/- 2 D

Aliphatic Polyurea

Aromatic Polyurea

The Polyeuro® MPL family is a two component, 1:1 ratio, fast gel modified polyurea liner system for general purpose on metal, concrete,fiber glass and wood surfaces. Whereas Polyeuro® MPL-82 ALU is aspecially tinted elastomer for roofing application as a topcoat.

High PressureHybrids

Polyeuro® LP series is a low pressure hybrid polyurea system for general purpose use in waterproofing and maintenance applications.

Low PressureHybrids

Polyaspartic Polyurea

Polyurethane Spray Coatings

Poly-Caulk® series offers Polyurea-Polyurethane plural caulking materialfor use on interior-exterior concrete surfaces to repair random cracks andcontrol joints. It offers application specific products in areas where downtime is limited.

CaulkingCompounds

Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Polyeuro® 7502 3300 +/- 300 220 +/- 20 400 +/-20 50 +/- 5 DPolyeuro® 7502 FR (Fire Retardant) 2300 +/- 300 200 +/- 50 225 +/-25 50 +/- 5 DPolyeuro® 7901 2300 +/- 300 350 +/- 50 325 +/- 50 90 +/- 5 A

Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Polyeuro® 5502 3500 +/- 200 450 +/- 50 450 +/- 50 50 +/- 5 DPolyeuro® 5602 2800 +/- 200 300 +/- 50 285 +/-50 60 +/- 5 DPolyeuro® 5901 2500 +/- 50 600 +/- 50 450 +/-50 85 +/- 5 APolyeuro® 5502 NSF 3500 +/- 200 400 +/- 50 450 +/-50 50 +/- 5 DPolyeuro® 6881 1900 +/- 150 375 +/- 25 300 +/-25 90 +/- 5 A

Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Polyeuro® MPL 11 2700 +/- 300 225 +/- 20 400 +/-40 50 +/- 5 DPolyeuro® MPL 55 2700 +/- 300 200 +/- 20 400 +/-40 55 +/- 5 DPolyeuro® MPL 85 1500 +/- 300 200 +/- 20 200 +/-40 85 +/- 5 APolyeuro® MPL 11 FR 1600 +/- 200 20 +/- 10 350 +/-50 55 +/- 5 DPolyeuro® MPL 82 ALU 2300 +/- 200 300 +/- 20 210 +/-30 80 +/- 5 A

Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Polyeuro® 1050 H 2800 +/- 200 35 +/- 10 400 +/-50 70 +/- 5 D

Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Poly-Caulk® 50A 425 +/- 50 550 +/- 50 50 +/-10 50 +/- 5 APoly-Caulk® 80 1500 +/- 50 300 +/- 50 275 +/-10 80 +/- 2 APoly-Caulk® HM 2000 +/- 200 600 +/- 50 425 +/-50 80 +/- 5 APoly-Caulk® PX-27 (self-level) 300 +/- 50 800 +/- 50 50 +/-5 30 +/- 5 APoly-Caulk® PX-27 Gun Grade 200 +/- 50 600 +/- 50 50 +/-5 30 +/- 5 APoly-Caulk® JF 400 +/- 50 900 +/- 100 60 +/-10 15 +/- 5 A

Tensile Elongation Tear Hardness(psi) (%) (pli) (Shore)

Polyeuro® LP-12 1300 +/- 200 200 +/- 50 200 +/-25 90 +/- 5 APolyeuro® LP-11 2000 +/- 300 250 +/- 50 200 +/-25 91 +/- 5 APolyeuro® LP-1188 1300 +/- 200 200 +/- 50 200 +/-25 91 +/- 5 APolyeuro® LP-12-HE 2800 +/- 200 430 +/- 50 220 +/-25 85 +/- 5 A

These are the Polycoat Polyurea products which have ahigh degree of color stability upon UV exposure.

These are the Polycoat’s Polyurea products which are functionally unchanged upon UV exposure, although theremay be discoloration. Polyeuro® 6881 is relatively slow setpolyurea whereas Polyeuro® 5502 NSF is approved as a potablewater lining as per ANSI / NSF 61 Standard.

Polycoat-Staingard is a two component liquid applied aliphaticPolyaspartic coating with high gloss retention and UV stability. It is

used as topcoat over aromatic Polyurea, Polyurethane or hybrid coatings systems.

Polyurethane spray coatings are typically used as a coating or lining in water tanks, secondary containment and waste water

management applications. Polyeuro® 1050 H is ANSI / NSF-61 approved for direct contact with potable water.

Polycoat offers quick setting, 100% pure Aromatic andAliphatic polyureas that can be applied to suitably preparedconcrete and metal surfaces. The Polyeuro® 5xxx series is aro-matic, non color stable whereas the Polyeuro®7xxx series isaliphatic color stable. These coatings can be applied in singleor multiple applications and are relatively insensitive tomoisture and temperature allowing applications in mosttemperatures.

Golf Creek ClubDubai

Sewage TreatmentUSA

MLB Stadium, CAUSA

Manhole RehabilitationUSA

Roof Deck Car ParkAustralia

Clarifier TankUSA

Car ParkAustralia

Product

Product Product

Product

Product

Product