the world’s largest manufacturer of 1955-56-57 chevrolet

Phone : (800) 648-4728 • www.danchuk.com 1

New Parts

ThE World’s largEsT ManufacTurEr of 1955-56-57 chEvrolET rEsToraTion ParTs

suPPlEMEnT

to Catalog 31 add To danchuK caTalog for MosT coMPlETE lisT of ParTs

1956 BEl air MouldingsThat’s right, two AND four door. We have completely tooled up in-house and are now making all 1956 side stainless 100% in the United States of America! The tooling was made 100% by Danchuk hands from American steel. Each moulding is created out of the best stainless steel available in the US with the most brilliant polish you could imagine. And yes, we knew there was no way we could put all of this time and effort into such a huge project and leave our four door friends out. SO we now have the most beautiful and correct side stainles for two and four door cars. Don’t spend your hard earned money on anything but the best . . . . Danchuk, “There’s no comparision”.

nEW ParTs addiTions To caTalog 31aT lasT . . . .1956 BEl air Mouldings

MadE in ThE usa

#17311, #17316 and #17317

#17317

#17312

#17314

#17315

BEsT 1956 2-door Mouldings - MadE in ThE usa!1956 2 & 4-Door, Bel Air Fender Spear Point, Driver & Psngr, Best.................................................................................................#17311 .......... $44.95/ea. 1956 2-Door, Door, Bel Air, Lower Driver/Upper Psngr, Best.................................................................................................#17312 .......... $49.95/ea. 1956 2-Door, Door, Bel Air, Upper Driver/Lower Psngr, Best.................................................................................................#17313 .......... $49.95/ea. 1956 2-Door, Bel Air, Quarter Panel, Driver, Best ................#17314 .........$114.95/ea. 1956 2-Door, Bel Air, Quarter Panel, Psngr, Best ................#17315 .........$114.95/ea. 1956 2 & 4-Door, Bel Air, Fender, Upper Psngr/Lower Driver, Best.................................................................................................#17316 .......... $49.95/ea. 1956 2 & 4-Door, Bel Air, Fender, Lower Psngr/Upper Driver, Best.................................................................................................#17317 .......... $49.95/ea.

good 1956 2-door Mouldings - iMPorTEd1956 2 & 4-Door, Bel Air Fender Spear Point, Driver & Psngr, Good.................................................................................................#711 .............. $39.95/ea.1956 2-Door, Door, Bel Air, Lower Driver/Upper Psngr, Good.................................................................................................#714 .............. $44.95/ea.1956 2-Door, Door, Bel Air, Upper Driver/Lower Psngr, Good.................................................................................................#715 .............. $44.95/ea.1956 2-Door, Bel Air, Quarter Panel, Driver, Good ...............#729 ............$106.95/ea.1956 2-Door, Bel Air, Quarter Panel, Psngr, Good ...............#730 ............$106.95/ea.1956 2 & 4-Door, Bel Air, Fender, Upper Driver/Lower Psngr, Good.................................................................................................#713 .............. $44.95/ea.1956 2 & 4-Door, Bel Air, Fender, Lower Driver/Upper Psngr, Good.................................................................................................#712 .............. $44.95/ea.

*sEE PagE 2 for rEMaining 4-door Mouldings

2 Catalog Supplement

New

Parts

ouTsidE rEar viEW Mirror WiTh lEd Turn signalThese replacement mirrors feature a pol-ished stainless head, as original, and a chrome plated base. They also have a 9 LED arrow hidden inside the mirror glass. These mirrors fit both sides, just rotate the head to point the arrow in the correct direc-tion, and include a base gasket, mounting bracket and mounting hardware and they are easy to hook up. Just route the wires through your door and under the dash, connect them to the front turn signal wires under the dash near the steering column. 1955-57 ...................................................................................#16993 .......... $34.95/ea.

1956 4-door Mouldings - MadE in ThE usa!We have completely tooled up in-house and are now making all 1956 side stainless 100% in the United States of America! The tooling was made 100% by Danchuk hands from American steel. Each moulding is created out of the best stainless steel available in the US with the most brilliant polish you could imagine. And yes, we knew there was no way we could put all of this time and effort into such a huge project and leave our four door friends out. SO we now have the most beautiful and correct side stainles for two and four door cars. Don’t spend your hard earned money on anything but the best, Danchuk, “There’s no comparision”. 1956 Door, Front, Lower Driver/Upper Psngr, Hardtop .......#17124 .......... $49.95/ea.1956 Door, Front, Upper Driver/Lower Psngr, Hardtop .......#17125 .......... $49.95/ea.1956 Door, Rear, Driver, Hardtop...........................................#17126 .......... $99.95/ea.1956 Door, Rear, Psngr, Hardtop ...........................................#17127 .......... $99.95/ea.1956 Door, Front, Lower Driver/Upper Passenger, Sedan ..#17130 .......... $49.95/ea.1956 Door, Front, Upper Driver/Lower Passenger, Sedan ..#17131 .......... $49.95/ea.1956 Door, Rear, Driver, Sedan .............................................#17132 .......... $99.95/ea.1956 Door, Rear, Psngr, Sedan .............................................#17133 .......... $99.95/ea.1956 Quarter Panel, Driver, Hardtop .....................................#17128 .......... $99.95/ea.1956 Quarter Panel, Psngr, Hardtop .....................................#17129 .......... $99.95/ea.1956 Quarter Panel, Driver, Sedan ........................................#17134 .......... $99.95/ea.1956 Quarter Panel, Psngr, Sedan ........................................#17135 .......... $99.95/ea.

cEnTEr PosT BElTlinEsTainlEss MouldingsThis is the center post beltline moulding which keeps the continuity of the belt line mouldings on the front and rear doors of 4-door sedans. Danchuk # 17000 will work on any 1955-1957 classic Chevy Bel Air 4-door sedan.1955-57 Bel Air 4-Door Sedan............................ #17000 ...... $44.95/pr.

vErTical fin Mouldings1957 Passenger . #17200 ....$155.95/ea.1957 Driver ........ #17201 ....$109.95/ea.1957 Gas Door Filler............................ #17202 ....$109.95/ea.

BillET sPEcialiTiEssliM linE licEnsE fraMEAll ....................... #17146 ...... $21.95/ea.

#17200

#17201

#17202

#17126-17127

#17132-17133

#17128-17129/#17134-17135

#17130-17131

#17124-17125


New Parts

classic 7” hi/lo hid or XEnon hEad-lighTsDelta headlights are a direct replacement for your stock sealed beam lights and re-use the original mounting hard-ware and connectors. These DELTA lights are equipped with lead-crystal lens, steel reflector and rubber boots to protect them from the elements and they are 28% brighter than daylight. The City Light version is equipped with built-in city light that can be wired as a park/turn signal light or a daytime runner. H.I.D. lights are not DOT approved and are for off road use only. 1955-57 HID ............................................................................#17021 ......... $399.95/pr.1955-57 HID with City Lights ................................................#17020 ......... $399.95/pr.1955-57 Xenon with City LIghts ............................................#17019 ......... $129.95/pr.

halogEn hEadlighT WiTh WhiTE haloThis is a halogen replacement headlight with a white LED halo around the outer rim of the bulb. Danchuk #17024 will work on any 1955-1957 classic Chevy model.All 7-inch ............ #17024 ......$24.95/ea.

BEzEls noT includEd

halo angEl EyEs halogEn hEadlighTsAll 7”, White ........ #17304 .... $164.95/pr.All 7”, Multi-Color............................ #17305 .... $219.95/pr.

hEadlighT BucKET assEMBlyFinally the days of searching swap meets and junkyards is over. They come complete with the headlight bucket, retaining ring, springs, gasket and adjuster. All you need to add is the bulb and a new bezel. Wiring is sold separately. Dancuk #16987 will work for any model of 1957 classic Chevy. Reproduction headlight bucket assembly fits both sides.1957 .................... #16987 ......$52.95/ea.

digi-Tails convErsion KiTsDIGI-TAILS kits are safer and brighter than standard factory lights or other LED kits be-cause these light-panels contain high-intensity wide-angled LEDs that are strategically positioned to maximize light output and fully optimize your lenses. And are also the only fully sequential LED kits. Digi-Tails utilize advanced technology by lighting LED’s in a fluid and sweeping pattern, rather than merely lighting up blocks of LEDs. DIGI-TAILS allows you to choose standard operations or the fully sequential feature with a flip of a switch, conveniently located on every board. Included pigtail kits come complete with everything needed to replace your old standard bulbs with high quality LED lighting; clear instructions are included. DIGI-TAILS are designed and manufactured for durability and unsurpassed quality here in the USA.1955 Taillight...........................................................................#17191 ......... $249.95/kit1956 Taillight...........................................................................#17192 ......... $189.95/kit1957 Taillight...........................................................................#17193 ......... $199.95/kit1955 Parklight ........................................................................#17194 ......... $109.95/kit1956 Parklight ........................................................................#17195 ......... $109.95/kit1957 Parklight ........................................................................#17196 ........... $99.95/kit1955 Taillight & Parklight .......................................................#17197 ......... $299.95/kit1956 Taillight & Parklight .......................................................#17198 ......... $259.95/kit1957 Taillight & Parklight .......................................................#17199 ......... $249.95/kit


New

Parts

rETrosound zuMa aM/fM sTErEosThe new Retrosound Zuma looks like an old-fashioned radio -- complete with authentic-look push button styling and replica knobs -- but offers the modern conveniences of a rear mounted USB port, two auxiliary inputs, built in high power (45X4) amplifier and digital AM/FM tuner with 30 presets. You can connect your digital audio player, satellite radio, or a USB thumb drive loaded with music files and enjoy hours of entertainment in your classic vehicle. An enhanced LCD display features dual-color (white and green) illumination. Two sets of preamp outputs let you add external amplifiers. For the latest in audio technology for your car, choose a Retrosound Zuma.1955-56 with Chrome Face ............ #17258 ............$279.95/ea.1957 with Chrome Face ................. #17260 ............$279.95/ea.1955-56 with Black Face ................ #17260 ............$279.95/ea.1957 with Black Face ..................... #17261 ............$279.95/ea.

Touch-n-goKEylEss igniTion sysTEMGet the most advanced key-less ignition technology at the tip of your finger, with the Touch-N-Go Start keyless ignition system from Ididit. This is the industries FIRST touch sensitive start system and features a 22 mm alumi-num button with multi-color LED lights that always let you know what mode it’s in. There are no moving components to wear out, ensuring years of outstanding performance. You’ll never have to use your keys again! Just stick your programmable key fob in your pocket or wallet and the system will sense your ap-proach, having the capability of automatically unlocking your door as you get close and locks as you leave (the system only responds when the key fob is in range). For added safety, this system can also be programed to turn on your dome lights as you approach.All ............................................................................................#17032 ......... $628.95/kit

aM/fM WondErBar radiosThese reproduction radios are the closest things to the originals in appearance, but they have allot of the updated features you need for a better sound system. All radios fit just like the originals and use factory style antenna, the Wonderbar duplicates the action of the original as it seeks up, then returns to the bottom and starts over. All radios feature: AM/FM a digital tuner, AM dial is in foreground FM is in background, 10 Presets (5AM, 5FM), 4X45 watts RMS out, CD or satellite radio inputs (2 RCA rear jacks), correct knobs and pushbuttons. Knobs control: volume, bass, treble, balance, fader and tuning.1955 180 Watts................................ #17157 ............$695.95/ea.1956 180 Watts................................ #17158 ............$695.95/ea.

crysTal halogEn hEadlighTThis halogen sealed beam direct replace-ment offers a smooth glass lens and a crystal designed reflector to maximize focus and projection.All 7” .................. #17184 ......$16.95/ea.


New Parts

gPs sPEEdoMETErinTErfacE ModulEThis Auto Meter universal GPS interface module turns any elec-tronic speedo into a GPS speedo with the push of a button. The units are plug and play for all Auto Meter speedos and they will also work with virtually any electronic speedo on the market with an on-button 10 second calibration. The paintable magnetic micro antenna is fully sealed to keep out water and dust. 10 Hz sampling rate. Danchuk # 17014 will work for any 1955-1957 classic Chevy with an aftermarket electronic speedo as well as other vehicles you may have in your collection.All .................................................... #17014 ............$199.95/ea.

PainlEss PErforMancE classic Braid hosEsThe newest wire wrap by Painless Performance is “Classic Braid”. Classic braid is a tighter weave than power braid which looks very original in your classic car. It is woven from high tech materials and features a lateral split for ease of installation. Classic braid resists cuts and abrasions and it retains it’s shape up to 250 degrees. The Classic Braid chassis kit contains: 6-feet of 1-inch diameter, 10-feet of 3/4-inch diameter, 30’ of 1/2-inch diameter, 30’ of 3/8-inch diameter, 30’ of 5/16-inch diameter, 20’ of 3/16-inch diameter classic braid wire wrap along with heat shrink, tie wraps and tape.All Kit ............................................................................................................................ #17031 .........................................$269.95/kitAll 3/16”, 20ft ................................................................................................................. #17025 ..........................................$34.95/ea.All 5/16”, 20ft ................................................................................................................. #17026 .......................................... $42.95/ea.All 3/8”, 20ft .................................................................................................................. #17027 ...........................................$47.95/ea.All 1/2”, 20ft ................................................................................................................... #17028 .......................................... $52.95/ea.All 3/4”, 20ft ................................................................................................................... #17029 .......................................... $55.95/ea.All 1”, 10ft ...................................................................................................................... #17030 .......................................... $44.95/ea.

gPs sKydrivE anTEnna, sPEEdoMETEr sEndErCalibrate your speedometer in less than a minute and you don’t even have to leave your driveway! Sky Drive is the world’s most accurate electronic speedometer sending unit. No need for ECU convertors or pulse signal generators screwed onto your transmis-sion. The new Sky Drive uses GPS Satellite signals to operate your electronic speedometer. It updates 10 times per second and with one push of a button it’s ready to go. Danchuk #16989 will work on any 1955-1957 Chevy with a Classic Instruments gauge pack. Skydrive! the worlds most accurate speedo sender. All .................................................... #16989 ............$249.95/ea.


New

Parts

convErTiBlE ToP MounT BracE assEMBly1955-57 Driver ... #17036 ....$265.95/ea.1955-57 Passenger............................ #17037 ....$265.95/ea.

glovE BoX door hingEs1955-56 .............. #17067 ......$39.95/ea.1957 .................... #17068 ......$39.95/ea.

classic inTruMEnTs auThEnTic sEriEs 57 dash gaugEsThese packages come complete with electronic programmable speedometer; electronic tachometer, fuel, oil, psi, water temperature and volt gauges, all necessary sending units with fuel gauge compatible to the stock sender, custom made brackets specially fabricated to mount new Classic Instruments gauges into your stock opening complete with appropriate screws, high beam indicator mounted inside speedometer unit. Bezels not included. Authentic series designed to replicate original 1957 dash gauges.1957 Black ..............................................................................#17121 ........ $828.95/ea.

auThEnTic sEriEs 57 clocK1957 Black ......... #17122 ....$219.95/ea.#17121

gEnEraTor BracKETWiTh PoWEr sTEEring1956-57 6-1/2” .... #17257 ......$24.95/ea.

noMad BacK rEsT sEaT sTainlEss ToP Mouldings1955-57 Top.............................................................................#17246 .........$119.95/ea.1955-57 Top.............................................................................#17247 .......... $54.95/ea.1955-57 Half-Moon .................................................................#17248 .......... $69.95/ea.1955-57 Bottom ......................................................................#17249 .........$119.95/ea.1955-57 Corner .......................................................................#17250 .......... $39.95/ea.1955-57 Bottom Front ............................................................#17251 .........$169.95/ea.1955-57 Bottom Rear .............................................................#17252 .........$119.95/ea.1955-57 Front Corner .............................................................#17253 ...........$76.95/ea.1955-57 Bottom Side .............................................................#17254 .......... $54.95/ea.1955-57 Bottom Hinge Corner ..............................................#17255 ...........$74.95/ea.1955-57 Bottom Little Corner ................................................#17256 .......... $45.95/ea.


New Parts

BillET sPEcialiTiEs PoWEr BraKE PEdal covErs1955-57 Polished............................ #17117 ......$45.95/ea.1955-57 Black .... #17118 ......$45.95/ea.

BillET sPEcialiTiEsnon-PoWEr, Xl BraKE PEdal covErs1955-57 Polished............................ #17119 ......$45.95/ea.1955-57 Black .... #17120 ......$45.95/ea.

BillET sPEcialiTiEs BraKE/cluTch PEdal covErs1955-57 Polished............................ #17115 ......$39.95/ea.1955-57 Black .... #17116 ......$39.95/ea.

BillET sPEcialiTiEs floor MounT gas PEdals1955-57 Polished............................ #17109 ......$79.95/ea.1955-57 Black .... #17110 ......$79.95/ea.

BillET sPEcialiTiEs firEWall MounT gas PEdals1955-57 Polished............................ #17111 .....$104.95/ea.1955-57 Black .... #17112 ....$104.95/ea.

BillET dirEcT-fiT auTo BraKE PEdal arMs1955-57 with Standard Pad............................ #17274 ....$179.95/ea.1955-57 with Power Brake Pad............................ #17275 ....$179.95/ea.

innEr fEndEr TErMinal BlocK cliP sET of 2This is a three terminal wiring block that mounts in the inner fender of 1955-1956 Chevy cars and trucks. Danchuk #17012 will work on any 1955-1956 classic Chevy model. Some aftermarket terminal blocks may require minor trimming.1955-56 .............. #17012 ....... $9.95/set

BillET dirEcT-fiT BraKE & cluTch PEdal arMsDirect fit pedal assemblies are designed to replace original brake and clutch pedal arms.Billet aluminum construction with windowed arms complement other Lokar products.Curved pedal pads included and bronze pivot bushing for increased durability. Hard-ware included1955-57 with Standard Pads............................ #17276 ....$349.95/ea.

sTainlEss sill PlaTEs WiTh BoW TiEThese custom sill plates feature brushed and polished stainless accents with a thin black outlined trim. The raised ribs and bow tie are polished while the rest is brushed. Fits all 2-door body styles and mounting screws are not included.1955-57 2-Door .......................................................................#17236 ......... $139.95/pr.


New

Parts

BillET sPEcialiTiEs Ball Mill WirE looMsAll ....................... #17088 ...... $69.95/pr.All Bowtie .......... #17089 ...... $79.95/pr.

BillETsPEcialiTiEsdisTriBuTor claMPAll SB/BB, Polished............................ #17090 ......$29.95/ea.

BillET sPEcialiTiEs hEX valvE covEr hold doWnsAll 4-Pack........... #17083 ..... $24.95/set

BillET sPEcialiTiEs diMMEr sWiTch covErs1955-57 Round, Polished............................ #17113 ......$16.95/ea.1955-57 Round, Black............................ #17114 ......$16.95/ea.

BillET sPEcialiTiEsoval air clEanErsFits 4-barrel carbs with a 5-1/8 Air horns.All Small, Ball Milled............................ #17069 .... $119.95/ea.All Large, Ball Milled............................ #17070 ....$129.95/ea.All Large, Ribbed, Polished............................ #17064 ....$155.95/ea.

1-PiEcE MoldEd vinyl floor MaTThis is a molded vinyl pebble grain floor mat that fits in the passenger area of your tri-five and fits all body-styles and is trimmed to fit. Not a reproduc-tion of the original mat, but an excellent high-quality replacement for those who don’t want to put carpet in the 150’s or 210’s. Installs and trims easily and comes with a jute backing for insulation.1955-57 Black .........................................................................#17173 .........$185.95/ea.

BillET aluMinuM TrunK TriM KiTThis custom trunk trim kit is machined out of aluminum and attaches using 3M Trim Tape.1957 3-Piece ................................................................................................................. #17156 .........................................$279.95/kit

TrunK hingE Torsion rodsTired of getting hit in the head when you open your trunk lid? This pair of trunk hinge tor-sion bars, or trunk hinge springs, will give you the proper spring tension to keep the trunk lid from falling on your head. Get a set of these and never worry about dents in your scalp again. Danchuk # 6988 will work for any model 1955-1957 Chevy hardtop or convertible.1955-57 Hardtop, Conv. ..........................................................#16988 ......... $109.95/pr.


New Parts

BillET sPEcialiTiEsvalvE covEr long sTud KiTAll 4-Pack........... #17084 ....... $4.95/set

BillET sPEcialiTiEsBall Mill valvE covErsAll BB, Short ..... #17086 .... $184.95/pr.All BB, Tall ......... #17087 .... $184.95/pr.

BillET sPEcialiTiEs“chEvrolET” valvE covErs1959-86 SB, Short............................ #17081 .... $124.95/pr.1959-86 SB, Tall . #17082 .... $124.95/pr.All BB, Tall ......... #17085 .... $184.95/pr.

BillET sPEcialiTiEsBall Mill valvE covErs1959-86 SB, Short............................ #17079 .... $104.95/pr.1959-86 SB, Tall . #17080 .... $104.95/pr.

BillET sPEcialiTiEs Pcv valvEAll Polished ....... #17071 ......$32.95/ea.

BillET sPEcialiTiEsBrEaThEr caP WiTh BoWTiEAll ....................... #17072 ......$44.95/ea.

BillET sPEcialiTiEsPcv BrEaThEr WiTh BoWTiEAll ....................... #17073 ......$44.95/ea.

BillET sPEcialiTiEsBrEaThEr covErAll Ball Mill ........ #17074 ......$39.95/ea.

BillET sPEcialiTiEsPcv BrEaThEr caPAll Ball Mill ........ #17075 ......$39.95/ea.

BillET sPEcialiTiEs oval BrEaThEr caPAll Ribbed .......... #17076 ......$52.95/ea.

BillET sPEcialiTiEs oval Pcv BrEaThEr covErAll Ribbed .......... #17077 ......$52.95/ea.

BillET sPEcialiTiEs riBBEd valvE covErs1959-86 SB, Tall . #17078 ...... 209.95/pr.

These PML valve covers are standard perimeter mount covers for pre-1986 small block Chevy engines. The CHEVROLET script and fins are cast into the cover and are raised. On powder coated parts, the powder coat is shaved off the top of the script and the fins. These valve covers feature cast-in baffling and a mid-height design that will clear most roller and/or ratio rockers. All Of these covers feature: Strong sand-cast aluminum construction, thick side walls and gasket flanges that will not bend when bolts are tightened, cast-in internal baffles (1960-86 version) and mounting hardware is includedLate 59-86 Cast . #17188 .... $230.95/pr.Late 59-86 Orange............................ #17189 .... $349.95/pr.Late 59-86 Polished............................ #17190 .... $395.95/pr.

These sand cast aluminum valve covers feature raised CHEVROLET script lettering and 7 fins. They have perimeter mounting with staggered or offset bolt holes for 1955 to early 1959 cylinder heads. The mid height design clears most roller rockers. These valve covers do not have a provision for PCV, breather or oil fill because the original valve covers did not have a provision for PCV, breather or oil fill. This was done in the intake manifold.1955-59 Cast ...... #17185 .... $230.95/pr.1955-59 Orange . #17186 .... $349.95/pr.1955-59 Polish ... #17187 .... $395.95/pr.

finnEd aluMinuM valvE covErs WiTh chEvrolET scriPTs

#17185

#17189

#17190


New

Parts

EdElBrocK carBcaliBraTion KiTsAll calibration kits include an assortment of metering rods and jets, one pair of meter-ing rod retaining springs and a complete assortment of step-up springsAll #1486 ............ #17216 ...... $59.95/kitAll #1479 ............ #17217 ...... $69.95/kitAll #1487 ............ #17218 ...... $45.95/kitAll #1480 ............ #17219 ...... $69.95/kitAll #1489 ............ #17220 ...... $54.95/kitAll #1840 ............ #17221 ...... $59.95/kitAll #1841 ............ #17222 ...... $72.95/kitAll #1842 ............ #17223 ...... $59.95/kit

floaTlEss gas TanK sEndErThe floatless fuel tank sender from Classic Instruments uses a pressure transducer to measure the amount of gas in your tank. Designed to be be used in vented tanks with a depth greater than 6-1/2” this sender is installed from the top of the tank, not on an angle. You cut the tube 1/2” shorter than the bottom of the tank, install and wire it up according to the easy-to-follow directions. Calibration is a snap and you never have to worry about a float going bad ever again. Danchuk # 16990 will work in any 1955-1957 classic Chevy with a gas tank using a top mounted float as well as other vehicles you may have in your collection. Sender measures from 240-33 OHM.All 5-Bolt, 240-33 OHM ..........................................................#16990 .......... $89.00/ea.

BillET sPEcialiTiEsfuEl PuMP BlocK off PlaTEsAll SB ................. #17103 ......$19.95/ea.All BB ................. #17104 ......$19.95/ea.

sMall BlocK Manifold WiTh insTall KiTsEdelbrock has packaged all the necessary components to replace your stock iron intake manifold. These kits include an Edelbrock aluminum intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts and carburetor studs for an all-in-one-box installation for your classic Chevy. Get better performance from a simple manifold replacement kit. 1957-86 Performer EPS ..........................................................#17162 ......... $239.95/kit1957-86 Performer RPM .........................................................#17163 ......... $249.95/kit1957-86 RPM Air-Gap .............................................................#17164 ......... $309.95/kit

sMall BlocK ManifoldsWith a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box., these kits include: an Edelbrock manifold and a performer or Thunder AVS series carb with Standard finish to suit your engines air and fuel requirements, a chrome fuel inlet, high-quality Edelbrock intake gasket set, intake bolt set and carb stud kit.1957-86 Performer EPS, 600 Carbs ......................................#17165 ......... $589.95/kit1957-86 Performer Air Gap, 600 Carbs .................................#17166 ......... $695.95/kit1957-86 Performer RPM, AVS 800 Carbs ..............................#17167 ......... $729.95/kit1957-86 RPM Air-Gap, AVS 800 Carbs ..................................#17168 ......... $779.95/kit


New Parts

gas TanK linEr KiTNorthern Fuel Tank Liner Kit is resistant to gasoline, diesel fuel, hydraulic fluids, alcohol, ethanol, and other fuel additives. Its major use is sealing leaky fuel tanks.Seals all pin holes, will never crack or peel.All Quart ............ #17176 ...... $59.95/kit

2 X 4BBl igniTion coil 1956-57 #091, Repro............................. #17161 ......$89.95/ea.

fuEl injEcTion igniTion coil1957 #107, Repro............................. #17160 ......$89.95/ea.

WcfB car. ToP airhorn scrEW sETAll 20-Piece ....... #17159 ..... $19.95/set

carB linKagE Bushing/groMMET KiT 1955-64 4-Piece . #17148 ........ $6.95/kit

dETEnT slidEBuMPEr1955-57 Auto Trans............................ #17147 ........$2.50/ea.

EdElBrocK carB airhorn and BasE gasKET sETsAll ....................... #17224 ..... $10.95/setAll 5-Piece ......... #17225 ......$13.95/ea.

EdElBrocK PErfoMEr 350 v8 EnginEs17229: The Performer 320 has 9.0:1 compression ratio and delivers 320 horsepower and 382 ft/lbs. of torque. The Performer 320 is 100% brand new and includes a four-bolt main GM short block, Edelbrock Performer heads, Performer hydraulic camshaft, roller rocker arms, Performer series intake manifold, Thunder Series AVS 650 cfm carburetor with Performer EPS manifold and comes with black powder coated accessories.17230: The Performer 310 offers impressive looks and reliable performance with Edel-brocks 3x2 intake with 3 Edelbrock 94 Carburetors on top complete with chrome air cleaners and progressive linkage. The Performer 310 small-block Chevy crate engine is ideal for any classic Chevy owner looking for over 300 horsepower performance on 87-octane fuel. The Performer 310 is 100% brand new and includes a four-bolt main GM short block, Edelbrock Performer heads, Performer hydraulic camshaft, roller rocker arms, Finned Aluminum valve covers and satin finish intake complete with chrome filler tube and breather.17231:This is an affordably priced, entry level small-block Chevy crate engine for any street rod or muscle car driver on a budget that wants affordable 300+ horspepower per-formance on 87-octane fuel. Edelbrock E-Street crate engines start out with a 100% brand new GM short-block with 4-bolt main and 2-piece rear main seal. This new crate engine features black powder coated intake manifold, carburetor, valve covers and breathers, E-Street cylinder heads, Performer Series carburetor, Performer EPS intake manifold, Performer Series camshaft and quality distributor. E-Street heads are designed for high performance street applications and feature larger than stock intake and exhaust ports to improve engine efficiency. Sold without a water pump.All 320HP/382TQ with Carb AVS ...........................................#17229 ..... $5,799.95/ea.All 310HP/375TQ with Triple 94 Carb ....................................#17230 ..... $6,999.95/ea.All 315HP/38TQ with Carb .....................................................#17231 ..... $4,699.95/ea.

#17160 #17161

EdElBrocKunivErsal choKE caBlE KiTAll ....................... #17226 ...... $12.95/kit

EdElBrocK E-sTrEET Efi BasE sysTEMsGet the fuel economy and performance potential of electronic fuel injection with the ease of installation of a new carburetor with the Edelbrock E-Street EFI system. It’s ideal for any V8 engine originally equipped with a carburetor and intake manifold with a square-bore 4150 style flange. It features easy to use software pre-installed on the supplied touch screen tablet. This software allows the user to fine tune, make adjustments and monitor system performance without the need of a laptop PC. Part #17227 is for those who are supplying their own high-pressure fuel system.All ............................................................................................#17227 ...... $1,999.95/kitAll w-Returnless Fuel System ...............................................#17228 ..... $2,299.95/ea.

#17231#17230


New

Parts

crossfloW a/c condEnsErMade for cross flow applications this polished A/C condensor looks great and is compatible with all A/C systems. Danchuk # 17009 will work on any 1955-1957 classic Chevy model.1955-57 Polished ............................ #17009 ............$319.95/ea.

dual 11” sPal PullEr fan assEMBlyWiThouT conTrolsThis dual 11” SPAL fan setup is just what the doctor ordered for cooling your Tri-5. It features 12 11” 5-blade fans which pull a whopping 2250 CFM of air. Motor thickness is 4.250 and the fan thickness is 2.60 which means it will fit almost anywhere. Danchuk #17011 will work on any 1955-1957 classic Chevy model as well as other vehicles you may have in your collection. For Radiators mounted in the 6 cylinder position.All .................................................... #17011 .............$295.95/ea.

crossfloW radiaTors WiTh aluMinuM corEsuPPorT and a/c condEnsor This is a complete unit for your baby. The aluminum cross-flow radiator features heli-arc welded tanks and top and bottom air director/fin covers along with core support filler panels. The core is made in the USA from the finest materials and features dual 1” tubes and 14 cooling fins per inch to make sure your classic stays the temperature it needs to be. Fully polished, this makes a functional and great looking addition to your engine compartment. 1955 Automatic, Polished .............. #17003 .........$1,695.95/ea.1956 Automatic, Polished .............. #17004 .........$1,695.95/ea.1957 Automatic, Polished .............. #17005 .........$1,695.95/ea.1955 Manual, Polished ................... #17006 .........$1,629.95/ea.1956 Manual, Polished ................... #17007 .........$1,629.95/ea.1957 Manual, Polished ................... #17008 .........$1,629.95/ea.

ididiT TilT coluMndrEss uP KiTAll Retro, Chrome............#17033 ....... $59.95/kit

dual fan PacKagE WiTh conTrols,6-cyl PosiTion radiaTorsVintage air designed this specifically to help cool Tri-5’s with cooling problems, and they got it right! This dual electric fan package is just the thing for those hot summer days cruizing at 2 MPH as you don’t need any forced airflow, the fans do all the work! Danchuk # 17010 will work on any 1955-1957 classic Chevy model. For Radiators mounted in the 6 cylinder position.1955-57 ........................................... #17010.............$419.95/ea.


New Parts

BillET sPEcialiTiEs PoWErsTEEring hosE KiTs W- fiTTingsAll ....................... #17062 .... $199.95/kit

BillET sPEcialiTiEshuB adaPTErs1949-66 GM Columns............................ #17144 ...... $57.95/ea.Ididit/F.River/67-94 GM Columns............................ #17145 ...... $47.95/ea.

BillET sPEcialiTiEs sTEEring WhEEl WraPsAll 15-1/2”, Black .....................................................................#17139 ...........$51.95/ea.All 15-1/2”, Red ........................................................................#17140 ...........$51.95/ea.All 15-1/2”, Tan .........................................................................#17141 ...........$51.95/ea.All 15-1/2”, Light Gray .............................................................#17142 ...........$51.95/ea.All 15-1/2”, Blank .....................................................................#17143 ...........$41.95/ea.

BillET sPEcialiTiEs sTEEring WhEElsWheels feature Milled finger notches for a ulta-comfortable grip. Half Wraps, Horn but-tons, and Hub adapters are sold separatelyAll 15-1/2”, Chicayne ..............................................................#17136 ........ $254.95/ea.All 15-1/2”, Outlaw ..................................................................#17137 ........ $254.95/ea.All 15-1/2”, Classic ..................................................................#17138 ........ $254.95/ea.

siliconE hosE radiaTor PluMBing KiTThis reinforced silicone radiator plumbing kit includes two 90 degree elbows, one 45 degree elbow and one 6” straight connec-tor along with one 6” aluminum connector and one 45 degree aluminim connector. Danchuk # 17013 will work on any 1955-1957 class Chevy model as well as other vehicles you may have in your collection.All ....................... #17013 ...... $72.95/kit

BillET sPEcialiTiEs sMooTh ovErfloW TanKsAll 8.75” ............. #17096 ....$125.95/ea.All 13” ................. #17094 ......$99.95/ea.All 15” ................. #17095 ......$99.95/ea.

BillET sPEcialiTiEsThErMosTaT housingsAll SB/BB, 0-Deg............................. #17091 ......$79.95/ea.All SB/BB, 15-Deg............................. #17092 ......$79.95/ea.

BillET sPEcialiTiEsPlain radiaTor caPs All 16-lb. ............. #17107 ......$22.95/ea.All 7-lb. ............... #17108 ......$22.95/ea.

BillET sPEcialiTiEs hosE EndsAll 3/8” Polished #17097 ......$12.95/ea. All 3/8” Braided . #17098 ......$12.95/ea. All 5/8” Polished (Rubber Heater Hose)............................ #17099 ......$15.95/ea. All 5/8” Braided . #17100 ......$15.95/ea. All 1-1/2” Rubber #17101 ......$25.95/ea. All 1-3/4” Rubber #17102 ......$25.95/ea.

racK & PinionPoWEr sTEEring PuMPsAll Low Flow W-Reservoir............................ #17174 ....$144.95/ea.All Low Flow W-Reservoir, Polished............................ #17175 ....$215.95/ea.


New

Parts

BaEr ss4 rEar disc BraKE KiTsThe SS4 Rear system was designed to go along with our Track4 front offering. This features a 12” 1pc rotor with a drum in hat park brake with a full billet backing plate.1955-57 12” ........ #17287 . $1,295.95/kit

The SS4+ 13” rear is a great option for a customer looking at the Pro+ front, or Extreme+ front that doesn’t need or want that big of a brake on the rear. The SS4+ 13” features a 13” 2pc rotor with a drum in hat park brake.1955-57 13” ........ #17288 . $1,395.95/kit

BaEr Pro+ fronT disc BraKEKiT for hEidTs sPindlEs 1955-57 13” ........ #17286 . $2,245.95/kit

BaEr ss4+ fronT disc BraKE KiT for hEidT’s sPindlEs 1955-57 11” ........ #17284 . $1,095.95/kit

BaEr BraKE Pro+ fronToE sPindlE disc BraKE KiTThe Pro+ will allow you to upgrade to a 2pc rotor (a popular upgrade due to cosmetics and weight savings) and give you 6 piston Calipers. This is the first system we offer that will allow you to have the exact same looking brake front and rear! (Note: Baer is the only company to offer this!).The SS4+ rear option is a cost effective, cosmetically matching rear option as well!1955-57 13” ........ #17283 . $2,245.95/kit

BaEr BraKE ss4+ fronT oE sPindlE disc BraKE KiTThe SS4+ front system features all the benefits of our larger brake systems just in a smaller package to fit 15” wheels. This is a perfect system for the customer looking to retain a factory type 15” wheel, or the enthusiast that wants to have a larger wheel with the option to go back to that stock look.1955-57 11” ........ #17281 . $1,095.95/kit

ProPorTioningvalvE lighTsWiTch covErAll Chrome ........ #17154 ....... $2.00/ea.

EMErgEncy BraKEfloor BracKETsPreviously only available used, these highly sought after emergency brake floor brackets are finally available. These mount under the floor to the center brace and support the emergency brake idler lever and hold the idler assembly which is a key component to proper parking brake operation. Danchuk #16984 will work for any model 1955-1957 Chevy except convertible.1955-57 .............. #16984 ...... $79.95/pr.

fraME MounT BraKE PEdal/MasTEr cylindEr BracKETClean up your firewall with this frame mounted pedal and Booster/master cylinder bracket. This kit bolts under the floor, but is tucked up high so it won’t cause ground clearance problems. Kit includes: brake pedal assembly and frame bracket. 7” Booster/master/prop. valve sold separately. 1955-57 .............. #17209 ....$199.95/ea.

MasTErcylindEradaPTEr fiTTingsConverts your 3/8-24 fitting master cylin-der to GM’s ½-20 & 9/16-18 lines.All ....................... #17153 ...... $16.95/pr.

shoWWhEEls BlacK WiThMachinE liP sTrEETEr WhEElsAll 17 X 7 ............ #17262 ....$169.95/ea.All 17 X 8 ............ #17263 ....$169.95/ea.All 18 X 7 ............ #17264 ....$189.95/ea.All 18 X 8 ............ #17265 ....$189.95/ea.All 18 X 9 ............ #17266 ....$209.95/ea.All 20X 8.5 .......... #17267 ....$229.95/ea.All 20 X10 ........... #17268 ....$249.95/ea.

BaEr BraKE TracK4 fronToE sPindlE disc BraKE KiTThe Track4 is Baer’s most popular front offering, The Track4 is available with 13” 1pc rotors and is a great brake upgrade for customers looking to fill their 17” wheels, updated their car to a modern brake and have a great visual impact! Like all our other systems this will come complete with everything needed to mount to the corners on the car. Looking for a matching rear kit? Check out the SS4 as a matching rear op-tion with park brake? See#’s 17287-17288.1955-57 13” ........ #17282 . $1,595.95/kit

BaEr TracK4 fronT disc BraKE KiT for hEidT’s sPindlEs1955-57 13” ........ #17285 . $1,595.95/kit


New Parts

chroME disc/druM ProPorTioning valvE KiTs 1955-57 Disc/Drum.................................................................#17151 ......... $109.95/kit1955-57 Disc/Disc ..................................................................#17152 ......... $109.95/kit

chroME aluMinuM disc BraKE MasTEr cylindErsAll 1” Bore ..............................................................................#17149 .......... $85.95/ea.All 1-1/8” Bore ........................................................................#17150 .......... $85.95/ea.

5/6-BolT huB adaPTErsAll for Flame-River Column, Polished............................ #17213 ....$109.95/ea.All 69-up GM/IDIDIT Column, Polished............................ #17214 ....$109.95/ea.All 67-Earlier GM Column, Polished............................ #17215 ....$109.95/ea.

9-BolT huB adaPTErsAll for Flaming River Columns,Polished ............. #17210 ......$99.95/ea.All 69-up GM and IDIDIT Columns, Polished ............. #17211 ......$99.95/ea.All Billet Spec. Wheels toFlame-River Column............................ #17212 ....$109.95/ea.

#17210

#17211

#17214

#17215

ProPorTioning valvE BracKET and linE KiTAll Chrome .............................................................................#17155 ........... $49.95/kit


New

Parts

BillET sPEcialiTiEs 1-PiEcEalTErnaTor PullEy WiTh fanAll Polished ....... #17046 ......$59.95/ea.

BillET sPEcialiTiEsa/c cluTch covErAll Sanden 508, Polished............................ #17047 ......$44.95/ea.

BillET sPEcialiTiEs WaTEr PuMP PullEysAll Short, 2-Groove, Polished ...............................................#17048 .......... $79.95/ea.All Long, 2-Groove, Polished ................................................#17052 .......... $79.95/ea.

BillET sPEcialiTiEs shorT WaTEr PuMP PullEy nosE conEAll SB/BB, Polished............................ #17049 ......$19.95/ea.

BillET sPEcialiTiEs BolT-on PoWEr sTEEring PullEysAll 1-Groove, Polished............................ #17059 ......$64.95/ea.All 2-Groove, Polished............................ #17060 ......$69.95/ea.

BillET sPEcialiTiEs cranK PullEysAll Small Block, Short Water Pump, 2-Groove, Polished ...#17053 .......... $69.95/ea.All Small Block, Short Water Pump, 3-Groove, Polished ...#17054 .......... $79.95/ea.All Small Block, Long Water Pump, 2-Groove, Polished ...#17055 .......... $69.95/ea.All Small Block, Long Water Pump, 3-Groove, Polished ...#17056 .......... $79.95/ea.All Big Block, Short Water Pump, 2-Groove, Polished.......#17057 .......... $69.95/ea.All Big Block, Short Water Pump, 3-Groove, Polished.......#17058 .......... $79.95/ea.

BillET sPEcialiTiEs ToP MounT a/c & alTErnaTor BracKETsDesigned for use with the popular GM 60 to 80 amp alternators & Sanden 508 AC com-pressor. This bracket is CNC machined from 6061-T6 billet aluminum and polished to a mirror finish. Ideal for small block Chevrolet® motors that do not have mounting holes in the cylinder heads. This bracket mounts to the water pump and intake manifold to ensure stability and belt tension. Designed for use with short water pumps, GM 10SI / 12SI alternator and Sanden 508 AC compressor.All Polished ............................................................................#17045 .........$219.95/ea.


New Parts

cluTch PEdal cross shafT sPacErThis small ring fits on the end of the clutch pedal cross shaft and acts as a spacer between the cross shaft sleeve and splined bellcrank arm and is often forgotten when re-assembling the clutch pedal. Your clutch pedal will not work correctly without this important spacer. Danchuk #16982 will work on any 1955-1957 Chevy model running a manual transmission.1955-57 .............. #16982 ........$3.95/ea.

cluTch PEdal cross shafT slEEvEThis part is the sleeve which fits through the brake/clutch pedal housing.1955-57 .............. #16983 ......$13.95/ea.

Milodon rEPlacEMEnT oil PansThese Milodon replacement pans are the perfect replacement for your original pan. Unlike imported chrome pans, Milodon pans have flat unwrapped pan rails for a perfect glove fit. They feature very effective internal horizontal baffles for efficient oil control and their gold irridated finish assures quality and a distinctive look. Drivers side dipstick. Pan holds 5 quarts, plus the filter. Measures 8” deep at the lowest point. Note: These pans require the use of the “thick” oil pan end gaskets. Danchuk #16996 will work on any 1955-1979 small block chevy engine. Danchuk #16997 will work on any 1986 and up small block chevy engine and For use with engines that have a 1-pc rear main.1956-79 SB .............................................................................#16996 .........$119.95/ea.1986-UP SB ............................................................................#16997 .........$129.95/ea.

BillET sPEcialTiEs v-TracPullEy sysTEMAll Small Block, Power Steering & A/C, Standard. Polished............................ #17044 $1,395.00/ea.

BillET sPEcialTiEs Tru-Trac PullEy sysTEMsAll Small Block, Power Steering & A/C, Standard. Polished.................................................................................................#17040 ..... $2,195.00/ea.All Big Block, Power Steering & A/C, Standard Polished ...#17041 ..... $2,295.00/ea.All LS-1, 2, 3 & 6, Power Steering & A/C, Standard Polished.................................................................................................#17042 ..... $2,695.00/ea.All LS-7, Power Steering & A/C, Standard Polished ............#17043 ..... $2,695.00/ea.


New

Parts

facTory sTylE QuarTEr PanElsThese 4-door hardtop full quarters have not been available until now, and they are just like they came from the factory...they cover from lead line to lead line to lead line. Will work on 1957 Chevy 4-door hardtops. Truck freight shipping is required. 1957 4-Door Hardtop, Driver Side w-Holes .........................#17016 ........ $779.95/ea.1957 4-Door Hardtop, Passenger w-Holes ..........................#17017 ........ $779.95/ea.

rEar QuarTEr PanEl door jaMB PaTch PanElsThis is door jamb fits the 4-door hardtops only and covers from the stricker plate mount down to the rocker panel. This patch panel repairs the quarter panel/door jamb area. Will work on the driver side of any 1956-1957 Chevy 4-door hardtop.1956-57 Driver ........................................................................#16985 .........$129.95/ea.1956-57 Psngr ........................................................................#16986 .........$129.95/ea.

fronT fEndEr hEadlighT PaTch PanEls 1956 Driver ........ #17203 ....$239.95/ea.1956 Passenger . #17204 ....$239.95/ea.

fEndEr suPPorT To coWl BracKETs1957 .................... #17233 ...... $25.95/pr.

Body MounTBushing covErs1955-57 Hardtop, Convertible............................ #17208 ... $249.95/set


New PartsfronT EndshEET METal PacKagEsThese front end sheet metal packages include all the major pieces needed to replace damages or rusty original front clips.

1955 KiTs includE:• Outer Fenders• Inner Fenders w/ Extensions• Hood• Radiator Core Support and Filler Panels• Front Splash Pan w/Lower Fender Aprons• Truck Freight Charges Apply

1955 w/6-Cylinder Core Support............................ #17298 .$2,499.95/ea.1955 w/V8 Core Support............................ #17299 .$2,499.95/ea.

1957 KiTs includE:• Inner Fenders• Hood• Front Splash Pan• Radiator Core Support w/ Filler Panels• Lower Core Support Splash Pan Fillers• Outer Fenders w/ Top Cowl Brackets• Inner Fender Baffles (Front drain tubes pass thru these)• Truck Freight Charges Apply

150 Series w/6-Cylinder Core Support............................ #17300 .$2,499.95/ea.Bel Air-210 w/6-Cylinder Core Support............................ #17301 .$2,499.95/ea.150 Series with V8 Core Support............................ #17302 .$2,499.95/ea.Bel Air-210 with V8 Core Support............................ #17303 .$2,499.95/ea.


New

Parts

TailgaTE sKin 1955-57 Wagon Exc. Nomad .......... #17280 ............$169.95/ea.

TailgaTE 1955-57 Wagon Exc. Nomad .......... #17279 ............$649.95/ea.

narroWEd TrunK floor WiTh BracEs WiTh WidEr WhEEl TuBs KiTThis kit includes the factory style mini-tubs #17018 saving you even more money. Trunk floor has already been modified and flanged to accept mini-tubs saving you again time and money. Spare tire well is deleted. Fits Non-Wagon bodystyles including convertible. Allows use of 13” wide tires when used with leaf spring pocket kit.1955-57 ........................................... #17278 ......... $1,079.95/kit

TrunK floor WiTh BracEsfor WidEr WhEEl TuBsFor use with factory style mini-tubs #17018. Trunk floor has already been modified and flanged to accept mini-tubs. Spare tire well is deleted. Fits Non-Wagon bodystyles including convertible. Allows use of 13” wide tires when used with leaf spring pocket kit.1955-57 Floor Only......................... #17277 ............$729.95/ea.

sParE TirE WEll uPPEr PaTch1955-57 Nomad/Wagon ................. #17206 ............$129.95/ea.

sParE TirE WEll EXTEnsion KiT1955-57 Nomad, Wagon ................. #17290 .............. $89.95/kit

roof PanEl1955-57 Sedan ................................ #17289 ............$569.95/ea.

facTory sTylEMini TuBsSo you want the wider wheels and tires but you don’t want the normal tubbed look in your trunk? Then these are the answer. These mini tubs appear to be normal wheel wells from Chevrolet but they are a full 2-5/8” wider to accomodate those larger meats. Danchuk # 17018 will work on any 1955-1957 classic Chevy hardtop or sedan. Sold as a pair.1955-57 2-5/8” Wider, Sedan, Hardtop......................................................... #17018 ............ $309.95/pr.

Wagon TailgaTEaccEss covEr1955-57 .........#17066 ...... $44.95/ea.


New Parts

cargo floor coMPlETE1955-57 with Braces, with Extension & Spare Tire Well......................................................... #17207 .........$1,139.95/ea.

cargo floor1955-57 Nomad, Wagon, Sedn Delivery......................................................... #17294 ............$154.95/ea.

cargo floorEXTEnsions1955-57 Left Hand, Nomad,Wagon ..#17292 .... $39.95/ea.1955-57 Right Hand, Nomad,Wagon ..#17293 .... $39.95/ea.

cargo floor WiTh BracEs & EXTEnsion1955-57 without Spare Tire Well .... #17291 ............$679.95/ea.

cargo floorshocK suPPorTs1955-57 Lower, Driver..............#17296 .... $58.95/ea.1955-57 Lower, Passenger..............#17297 .... $58.95/ea.

loWEr sParE TirE WEll1955-57 Nomad, Wagon, Sedan Delivery......................................................... #17295 ............$199.95/ea.

coMPlETE sParE TirE WEll1955-57 Nomad/Wagon ................. #17205 ............$419.95/ea.

coMPlETE floor Pan WiTh BracEs1956-57 4-Door Hardtop......................................................... #17306 .........$1,099.95/ea.


New

Parts

fronT door handlErElEasE MEchanisMThis excellent reproduction is made of stamped steel. Replace that old, worn out release mechanism. Danchuk #16995 will work on the front doors of any 1956-1957 classic Chevy 4-door hardtop.1956-57 4-Door Hardtop............................ #16995 ...... $26.95/pr.

rEar door jaMB BracE1955-57 Driver............................ #17038 ....$149.95/ea.1955-57 Passenger............................ #17039 ....$149.95/ea.

vEnT WindoW ouTEr fraMEsFit 2 and 4 door sedans and wagons1955-57 Driver, Sedan/Wagon............................ #17234 .... $119.95/ea.1955-57 Passenger, Sedan/Wagon............................ #17235 .... $119.95/ea.

WindoW rEgulaTors1956-57 Front, Driver, 4-Door Hardtop ..................................#17307 .........$109.95/ea.1956-57 Front, Psngr, 4-Door Hardtop ..................................#17308 .........$109.95/ea.

QuarTEr WindoW TracKsThese MADE in the USA window tracks come fully lined and ready for installation.1955-57 Stainless, Convertible .............................................#17309 ......... $249.95/pr.

1955 gassEr rollErIt’s a steel body and chassis. Complete new steel body (less front end), complete Woody’s Gasser Chassis with ladder bars, radiused rear wheel wells, factory seams filled and sprayed in white epoxy coating. (Wheels and tires not included in price)1955 .........................................................................................#17310 ... $29,750.00/ea.


New PartsruBBErizEd rusTEncaPsulaTor undErcoaTing sPrayEastwood’s Rubberized Rust Encapsulator is the flexible version of their high-performance Rust Encapsulator coating that applies directly over rust or bare metal to provide long-term corro-sion protection. One can covers about 10 square feet. Danchuk #16994 will work for any model 1955-1957 classic Chevy as well as other vehicles you may have in your collection. 15 oz aerosol can.All ....................... #16994 ...... $19.95/pr.

EasTWood MasTEr WEldErs PanEl holding KiTAll 6-Piece ......... #17245 .......$61.95/kit

EasTWood inTErgriPsWElding claMPsAll 4-Pack........... #17244 ......#29.95/ea.

EasTWood afTEr WEld sPrayAll Quart ............ #17243 ......$19.95/ea.

EasTWood anTi-sPlaTTEr aErosolAll ....................... #17242 ......$10.95/ea.

EasTWood sElf ETching WEld-Thru PriMErAll Quart ............ #17241 ......$34.95/ea.

EasTWood sElf ETching WEld-Thru PriMErAll Aerosol ......... #17240 ......$14.95/ea.

EasTWood aErosolinjEcTEd clEanErAl ........................ #17239 ......$12.95/ea.

EasTWood flEXiBlE sEalEr/sound dEadEnEr W-EXT hosEAll ....................... #17238 ......$19.95/ea.

EasTWood ruBBEr/PlasTic& vinyl rEsTorEAll 6oz ................ #17237 ......$19.95/ea.

sMoKEd WindshiElds Due to popular demand, smoked windshields are now available. Due to D.O.T. regula-tions, the tint is a 10-15% lighter smoked tint than the side and back glass which is 30%smoked. Smoked windshields also don’t have the shaded band across the top like the factory tinted glass does.1955-56 Hardtop, Convertible, Nomad .................................#17180 .........$219.95/ea.1955-56 Sedan, Wagon ..........................................................#17181 .........$219.95/ea.1957 Hardtop, Convertible, Nomad ......................................#17182 .........$219.95/ea.1957 Sedan, Wagon ...............................................................#17183 .........$219.95/ea.

sEdan and Wagon door glass WiTh vEnT dElETEWe now offer glass for those who have removed there vent windows. Please specify bodystyle when ordering.1955-57 Clear .........................................................................#17177 .......... $78.95/ea.1955-57 Tinted ........................................................................#17178 .......... $78.95/ea.1955-57 Smoked .....................................................................#17179 .......... $78.95/ea.

BillET ouTsidE door handlEs1955-57 Polished, 2-Door Hardtop, Convertible ..................#17169 ......... $339.95/pr.1955-57 Satin, 2-Door Hardtop, Convertible ........................#17170 ......... $319.95/pr.1955-57 Polished, Sedan, Wagon, Nomad, 4-Dr. Hardtop.................................................................................................#17171 ......... $339.95/pr.1955-57 Satin, Sedan, Wagon, Nomad, 4-Door Hardtop......#17172 ......... $319.95/pr.

laKEsTEr chroME sTEEl handlEs All Door ..................................................................................#17271 ........... $89.95/pr.All Window Cranks ................................................................#17272 ........... $89.95/pr.All Vent Window Cranks ........................................................#17273 ........... $89.95/pr.

BillET crEscEnT oval arM rEsT door PullsAll Polished, Crescent Oval ..................................................#17269 ......... $125.95/pr.All Polished, Oval ...................................................................#17270 ......... $134.95/pr.

danchuK ManufacTuring 3201 s. sTandard avEnuEsanTa ana, ca 92705

Presorted StandardU.S. Postage PAIDLaguna Niguel, CA

Permit No. 400

suPPlEMEnTto Catalog 31

add This suPPlEMEnT To ThE danchuK caTalog for MosT coMPlETE lisT of ParTs!

So many New Parts,We just had to tell

customers about them!looK for a nEW danchuK caTalog laTE sPring!

the world’s largest manufacturer of 1955-56-57 chevrolet

Documents