the top 50 - mobile trends 50 catalog.pdf · 2020. 4. 29. · cept rs-l, rs-l and rs-l. 01 04...
TRANSCRIPT
-
The top 50
-
Your customers need solutions, not a
sales pitch. They want products that
are time tested, reliable and easy to
use. They want the best.
That is what we are here to provide.
This catalog chooses the best from
our thousands of products, and out-
lines them in a format that is quick
and easy to understand.
We hope it will serve to keep your
customers satisfied– and maybe help
you to discover a few new favorites.
The top 50
-
CONTENTS
01 03 SINCLAIR TECHNOLOGIES, antennas PULSE INC., antennas
05 07 PCTEL INC., antennas ASTRON CORPORATION power supplies
08 09 ICT, power supplies SAMLEX AMERICA, power supplies
10 11 MOBILIZER TCC, connectors
12 13 SMOOTHTALKER, boosters IMPACT, accessories
14 15 PRYME, accessories ANTENNA BASICS
17 19 CONNECTOR BASICS COAXIAL BASICS
mobiletrends.ca | 1-800-665-2955
-
Sinclair makes state of the art products. The company has been dedicated to developing in-novative, high quality products, bringing many industry firsts to market.
Never one to shy away from a challenge, Sin-clair offers custom solutions, and is always open to customer feedback and ideas.
02
03 CLAMP005 • Carbon steel.
• Hot dip galvanized.
• Pipe 1: 1.5”-3.5” diameter.
• Pipe 2: 1.5”-3.5” diameter.
Q2220E Duplexer
Q-Circuit, Res-Lok, 4 cavity, rack mount,
138-174 MHz
This unit is extremely versatile and pro-
vides stable performance at very low fre-
quency separations and insertion loss
values.
01 1
• Exterior finish will not chip or flake and is
resistant to Ultra Violet radiation.
• 1/2 wave with 26 MHz bandwidth.
SVB-1482 Omni Antenna
2 dBd, 1/2 wave, 132-174 MHz
• Weather proof base with sealing gasket.
• The Excelsior spring pin base included.
• Heavy duty construction for high perfor-
mance.
Dimensions: 19” by 30.3” by 4.17”
Weight: 28Lbs.
• Four cavity duplexer with 70 dB of iso-
lation.
• 1.5 dB insertion loss at 500 KHz.
-
06
04 SY406-SF4SNM Yagi Antenna Directional, 10 dBd, black anodized, 895-966 MHz
This antenna is designed for versatility and easy installation. Elements
are at DC ground for lightning protection. This antenna can also come in
phased arrays for increased gain.
• Black anodized aluminum for long life.
• 360 degree welded elements for durability and reliability.
• 10 dBd gain with low VSWR.
SD212-SF2P2SNM 2 Dipole Antenna
5.0 dBd, bi-directional, 138-174 MHz
The SD212 is designed for settings where moderate gain is necessary. Coverage ex-
ists in 3 sub bands– 118-138MHz (civil aviation), 138-174MHz (private networks,
public safety) and 220-225MHz (transportation).
• 5.0 dBd gain with bi-directional pattern.
• 300 Watt power handling.
• Can be top or side mounted (Universal mount).
05 CLAMP0017 • Pipe to 90 degree pipe.
• Galvanized Steel.
• Pipe 1 - 1.5"-3.5"
• Pipe 2 - 1.5"-3.5"
2
SCAN ME
-
03 PL259 UHF Male • UHF male solder female.
• UG175 adaptor for use on RG
55, 58, 141 and 142 Cables.
02 NMOWB150C Wideband Halfwave
• 135-174 MHz.
• Gain 2dBi.
• NMO mount.
• Stainless steel whip.
• 51. 75” max height.
Our customers love the NMO series antennas and mounts from Pulse/Larsen. These items are in constant demand for their easy use, reasonable pricing and consistent quality. Pulse creates our customer’s go-to NMO mounts.
NMOKHFUD Cable Mount
NMOHF mounts convert low frequency applications to high frequency applica-
tions by pulling or replacing the center pin and insulator.
These mounts require 3/4” hole for mounting, and include 17” of coax.
• RG58/U dual shield. • For Motorola style mobile antenna. • 0-6000MHz. • Nickel, copper and zinc. • Accommodates roof of 0.1” to 0.03”.
3
-
05 NMOWBQC
Most commonly used with
NMOKHFUD mount and RG-
58U Coax.
• 150-170 MHz.
• Wide band 1/4 wave.
• 2dBi gain.
• Stainless steel whip.
NMOKUD
This is a standard 3/4” mount for a 3/4” hole. Uses RG-58 dual
shield coax cable. No connector is included with this mount.
• For Motorola style mobile antennas.
• 0-1000MHz.
• Nickel plated stainless steel mount.
• Includes 17 feet of coax.
04
NMOKHFUDFME
• UD, RG-58U Dual Shield.
• FME connector.
• ROHS compliant.
• Cable mounting option.
• NMOHF direct.
06
4
Note: If mounting to a thick roof,
NMOHFTHK accommodates roof
surfaces up to 1/2” thick.
SCAN ME
-
01 MHB-5800 Antenna This antenna has a heavy wall ta-
pered housing, triple plated brass
fittings and a matching coil. It will
maintain frequency even in heavy
shock vibrations.
• 5/8 wave antenna.
• 144-174 MHz.
• Field-tunable.
• 3 dB gain.
• Maximum power input is 200
watts.
03 MLB-2700 Lowband Antenna These antennas are popular for seri-
ous CB applications. The coil is low
loss to handle shocks. The housing is
designed to protect against water
damage.
• 27-31 MHz, unity, 200W.
• Mates with 1-1/8” 18 thread
mounts.
04 MWV1322 Base Loaded 1/2 Wave Antenna
This antenna is wideband, field tunable and
designed to withstand high vibrations.
• Mates with 1-1/8” 18 thread mount.
• 132– 174 MHz. Bandwidth 26MHz.
• 2.4dB with ground plane. Unity without.
• Max Power 200W.
06 PCTCNMFT 1/4 Wave These antennas are durable and super flex-
ible, with brass contact button to protect
against shock.
• 118-940 MHz.
• Field Tunable.
•
-
02
05
MBMC-NC
Chrome mirror bracket mount.
• 1-1/8” 18 thread.
• Mirror Mount.
• 17” RG58U
• No connector.
08
NMO58U-NC NMO Mount
This item is a brass NMO series, with a gold
contact pin and brass nut ring. It can be
used for metal thickness of up to 0.046”.
These mounts install from above.
• Kit for Motorola style mobile antennas.
• 3/4” hole, 1-1/8 thread.
• 0-1000MHz.
• 17 feet of RG58/U cable.
MWV1322S Base Loaded 1/2
Wave Antenna
This is the same antenna as 4! Its such a fa-
vorite that adding a spring makes it just as
popular!
• Mates with 1-1/8” 18 thread.
• 132-174 MHz. Bandwidth 26 MHz.
• 2.4dB or Unity. Wideband.
6
-
SL11 Linear Power Supply
Slim Line series have more compact bodies for restrict-
ed space applications.
• Solid state electronically regulated.
• Fold-back current limiting protects from excessive
current and continuous shorted output.
• Crowbar over voltage protection on all models ex-
cept RS-3L, RS-4L and RS-5L.
01
04
RM-50A-BB Linear Power
Supply with Battery Back Up
• 50 Amps.
• Input 115 AC to output 13.8 DC.
• 19 x 5.25 x 12.5 inches.
03 02
N2412-12 Voltage Converter This step down DC/DC converter offers
high efficiency conversion. Designed for
negative ground systems/vehicles. Best
suited to heavy vehicles, and industrial
settings.
• Input 22-32 VDC to output 13.8
VDC.
• Continuous current 10 AMP.
• 6.2 x 6 x 2 inches.
VS-20ML Variable Power Supply Solid state regulated 20 Amp variable power
supply. These units have a chassis mounted
fuse and less than 5 mv ripple peak to peak.
• Adjustable current 1.5 to 20 amps.
• Volt and current meters.
• 20Lbs.
• 5 x 9 x 10.5.
7
SCAN ME
-
ICT12012-12A Comm Series Switching
Power Supply These units are designed for a variety of radio applications. The
unit is compact and sized to standard radio dimensions.
• Noise-free.
• High efficiency MOSFET design.
• Fuse protection.
• Terminal block output connector.
01
03 02 ICT2412-10A Converter • Input voltage 20-30.
• Output voltage 13.8 volts.
• Peak output current 10A.
• Size: 9.48 x 4.06 x 1.77.
• Weight 1.69 lbs.
ICT2412-15A Converter
• Input voltage 20-30 voltage.
• Output voltage 13.8 volts.
• Peak output 15A.
• Size: 9.48 x 4.06 x 1.77
• Weight 1.84 lbs.
04 ICT180S-12 • 180 amp peak system.
• 12 fused output positions.
• Form C alarm contracts.
• Front mounted fuses.
• Fuse status led.
• Up to 30 days of data-logging.
ICT provides DC power conversion products for the land mobile radio, fixed wireless broadband, small cell and industrial DC power markets. ICT has a reputation for hard wearing products with serious reliability even in the harshest Canadian setting.
8
SCAN ME
-
01
02 03 SEC1212 10 Amp Switch-ing Power Supply
This unit supplies clean and relia-
ble power which is highly filtered
to suppress RFI.
• Input voltage can be set at 120VAC or 240VAC. • Input: AC 120 V, 60 Hz • Output: DC 13.8 V, 10 A
04
SEC-1223 23 Amp Switch-
ing Power Supply
This unit is a high efficiency AC-DC
power converter, designed specifi-
cally for land mobile.
• Advanced switch mode design. • Mount in almost any location. • Input: AC 120 V, 60 Hz • Output: DC 13.8 V, 23 A
05 SDC-15 • Advanced switch mode design. • Mount in almost any location. • Compact and light weight. • Reverse polarity protection. • High efficiency. • Cycle by cycle current limiting circuit.
SDC-12 24VDC-12VDC
Converter
This is a switch mode step down
DC-DC converter.
• Input: 24 VDC • Output: 12 VDC at 12 A • Non-isolated. • Reverse polarity.
9
Samlex is known for innovative product design, strict quality con-trol, as well as responsible before and after sales service. Thus providing customers with superior power conversion products at extremely competitive prices.
12250 Base Station Cover for Kenwood
• Used with TK7180/8180, TK7160(H)/8160H. • 5.5 x 7.3 x 8.7 inches. 2 Lbs.
SCAN ME
-
01 17-03F-7-DNN UHF Connector
(U-505)
• UHF Male Crimp. • Delrin Insulation. • Nickel plated body. • TCC Cable Group F.
02 23-13-DGN Adapter
• Mating End 1 FME Male. • Mating End 2 UHF Male. • Delrin Insulation. • Gold Plated Pin. • Nickel Plated Body.
03 11-11T-3-TGS N Connector
(N-1006-1SI)
• Male Crimp. • Teflon Insulation. • Gold Pin & Silver plated Body. • For Cable Group T.
05 12-02F-DGN Mini UHF (U-600-1)
• Male connector. • Gold plated pin. • Nickel plated body. • TCC Cable group F.
10
SCAN ME
-
01
Mobilizer is our in-house brand. We manufacture quality generics to save you money!
Mobilizer merges the concepts of practicality and cost effectiveness. As a result, it is one of our best selling product lines!
NVA148D
• 148-174 MHz. • 1/2 wave wideband. • 2 dB. • Includes whip.
02 AT-1071 • NMO Cable Sealed. • 17” RG 58/U. • NC connector.
03 04 GL318U-PL Mag Mount • 3.5” in diameter. • Chrome NMO. • 17 feet of RG58/U • PL259 end connector.
GL318AU-PL Mag Mount
• 3.5” in diameter. • Chrome NMO. • 17 feet of RG58/AU. • PL259 end connector.
05 23-02F-5-DGN FME Connector
• Female Crimp. • For RG58.
11
SCAN ME
-
01
BT30M14UA Booster Kit with
Cradle.
• 30dB, 2 band. • 14” mag mount antenna & CLA charger for cigarette port.
03
02
04 ADCR100 MCT Connector
• Female crimp. • For RG58
BMC50M14PC Wireless Booster Kit
This unit does not require a connection to the cell phone it is boosting. It works for cars, RV’s, boats and trailers. • 50dB, 2 Band. • 3G, 4G. • Includes 14” mag mount antenna & CLA charger for cigarette port.
BMCX650M14PC Wireless Booster Kit
This device is designed for multiple users and multiple devices. It is constructed of cast alumi-num for longevity. • 50dB, 6 band. • 4G LTE Signal. • Includes 14” mag mount antenna & CLA charger for cigarette port.
12
SCAN ME
-
01
Impact is a Canadian company building top of the line accessories for the communication industry. Impact products are affordable, reliable alternatives to those sold by radio produc-ers. Further, Impact fills gaps left by manufacturers. Impact products are totally customiza-ble to the radio you are using! Simply change the ending number to specify your radio brand. Impact also has an amazing warranty program– 2 years on all gold level, 3 years on all platinum!
AC-1 Universal Desktop Charger
• Rapid Rate. • Quad-Chemistry. • Tough poly carbon casing. • LED charging/charged indicator. • 110/240V self switching power supply for
international use. • Wide range of adapter cups available for
most portable models. • Two year warranty.
SRSM-MD1 Medium
Duty Speaker Mic
• Small form fit. • 360 degree swivel. • Standard 3.5mm port.
silver gold platinum
GRSM-HD1 Medium
Duty Speaker Mic
• Heavy Kevlar coil cable. • Splash proof. • 3.5mm accessory jack. • Two year warranty.
PRSM-HD3 Speaker
Mic
• Professional grade. • Environmental PU cable. • Heavy duty strain relief. • Wind, water, impact &
dust resistant. • Three year warranty.
13
SCAN ME
-
01 BT-M00J Bluetooth for Icom Mobiles
02 BT-M01J Bluetooth for
Kenwood Mobiles
04 BT-501 Bluetooth Adaptor
for Kenwood Portables
• Fits all Kenwood two-pin radios. • Internal battery 33mAh. • Can be used with two PTT switches at the same time. • Talk time: 14 hrs.
05
BTH-700/800/900 Bluetooth Dual Muff
Headset
• Wireless headset available in 3 configurations: 800 over the head, 700 helmet clip in, 900 behind the head. • Range of 10 meters • 12 hrs. of talk time, 50 hrs. standby. • Waterproof buttons provide cellphone and radio ptt, volume control and power switch. • Battery charger and cord included.
14
03
BT-530 Bluetooth Adaptor
for Icom Portables
• Fits all Icom radios with two-pin connector. • Internal battery 330mAh. • Talk Time: 14 hours.
SCAN ME
-
Wavelength
Antennas are often referred to by their relative wavelength. For example, a 1/2 wave is
half the size of the respective wave the antenna is used for. A 1/4 wave is a quarter the size
of the wavelength.
Impedance
Impedance of the radio, antenna and coax should match (generally this is 50 Ohms).
VSWR
Voltage Standing Wave Ratio demonstrates the quality of the impedance match for the an-
tenna. Simply, it measures how much of the signal bounces back from the antenna (thus
wasting power).
Gain
Gain represents how well an antenna converts input power into radio waves in a particular
direction. This is a logarithmic measure. Thus, 6 dB is double the power of 3 dB.
Antenna Patterns
Omnidirectional
The antenna sends and receives signal from all directions. These antennas use different
gains for varying terrain. For example, 0dB radiates up, thus making it useful for higher
sites. 3dB is good for city settings. 5dB radiates out to the sides, thus making it better for
open area.
Directional
The antenna focuses energy in a single direction.
Field Tunable
An antenna that is field tunable generally involves either: 2 elements that can slide or tel-
escope to a particular length, or the metal whip can be cut to a specified frequency length.
Whips that are intended to be cut will have a ‘cutting chart’ that outlines the lengths re-
quired for particular frequencies.
Antenna Basics
15
-
Dipole
This antenna (generally a 1/2 wave) is split at the center
for a feed line to give or take power.
Yagi
Yagi's are directional antennas with multiple elements
protruding from a central boom. The side elements are
not connected to the transmitter or receiver. This style
obtains a significant increase in directionality and gain.
Loading Coal
Loading is the placing of a loading coil at the base of
an antenna. This allows the antenna to be shorter
than usually required for a given frequency.
Collinear Antenna
A collinear antenna array is a series of dipole antennas along a common
line (see right). Generally these are high gain omnidirectional antennas.
This style of antenna is used for base stations or public services.
Low Profile Antenna
This antenna design decreases the height of an antenna.
This is achieved either by placing the antenna lengthwise,
or by coiling the antenna.
NMO
NMO stands for New Motorola. This is used for installing an antenna on a
fixed structure like a vehicle. These mounts are generally ‘truck lid’, ‘magnet’
or ‘through-hole’ which is the most rugged.
16
-
FME Connectors
A miniature 50 Ohm connector for DC to 2000MHZ, used
with RG58 or other coaxial cables.
N Connectors
A threaded, weatherproof, medium sized RF connector used to
join coaxial cables. This was one of the early connectors carry-
ing microwave signals. N stands for Paul Neill, the inventor.
BNC Connectors
A miniature quick connect and disconnect RF connector used for co-
axial cable. It has two bayonet lugs on the female connector. These
bayonet lugs can wear down over time. These connectors are gener-
ally used for antennas, base stations, radios, satellite communications
and medical equipment.
TNC Connectors
A threaded version of the BNC connector. TNC connectors
best operate in the 0-11 GHz frequency. TNC also includes a
variation that reverses the polarity of the interface.
SMA Connectors
Subminiature Version A interface connector for coax and screw-
type coupling mechanisms. This connector was created for use be-
tween DC to 18GHz, but is generally used for antennas (WIFI).
Connector Basics
17
-
UHF Connectors
A connector developed for use in systems from 0.6 to 300 MHz.
These connectors are popular because they are easy to use. The
termination is screw on and requires no special tools.
Mini UHF Connectors
A miniature UHF connector. These connectors are de-
signed for scenarios where size is critical. These are most
useful for applications up to 2.5 GHz. Mini UHF use RG-58,
RG-58A/B/C cable.
18
Male vs. Female
Male connectors (left) generally have a center pin or
similar item. Female connectors (right) are designed
to fit the pin of the male connector. For those con-
nectors that thread, the male will have the threads
on the inside edge, the female will have the thread
on the outside.
-
Coaxial Cable Basics Generic Cable
Generic coax consists of 4 layers– a plastic
jacket, a metal shield, insulator and a center
core.
Shielding
The more shielding a cable has, the less inter-
ference that occurs. Shielding makes the ca-
ble stiffer and more difficult to work with.
Unshielded Twisted Pair
This consists of twisted pairs (generally 4) in
PVC or plenum jacket.
Foiled Twisted Pair
This consists of twisted pairs with foil shield sur-
rounding all pairs.
Shielded Twisted Pair
This consists of twisted pairs which are shield-
ed individually, reducing noise and interference.
Screened Foiled Twisted Pair
This consists of twisted pairs which are shield-
ed with braiding and foil.
Screened Shielded Twisted Pair
This consists of twisted pairs which are shield-
ed individually by foil, and collectively by braid-
ing.
19
-
Cable Groups
Cable Groups
Cable groups are similar cables with slightly different properties. These cables can use the
same connectors. Connectors within the same cable group can be terminated with any ca-
ble type within the family.
Example: Cable Group C contains RG-58, RG-58A, and RG-58C.
Common Cable Types RG-58 RG-58 is one of the most common coaxial cables used for RF applications. This cable has a
impedance of 50-52 ohms. General characteristics include: 5mm diameter, 37g per meter,
max potential of 300V. This cable has higher losses, but is small enough to use in a vehicle
application. This cable is generally used when less than 100ft will be employed in the task.
LMR 400 LMR400 is used for a variety of radio applications, ranging from Ham to commercial includ-
ing GPS, LMR, WLAN, WISP, SCADA, mobile antennas. End connectors are generally TNC,
SMA, N, BNC and 7-16 DIN. The low loss characteristics of this cable make it best suited for
base station or long distance cable runs. The cable is larger than RG58 and rigid. Thus, it is
not for use in a vehicle application.
Note: the part number of LMR represents the diameter of the cable. LMR 400 is .405 of an
inch.
Solid vs. Stranded Solid vs. Stranded Solid (U) wire has a single center piece of metal. Stranded (AU), conversely, has many
small pieces of wire making up the center core. Stranded is more flexible and can take
more abuse. Solid is easier to work with to attach connectors, and has less loss.
20
-
762 Mt. Paul Way,
Kamloops, BC,
V2H 1B5
mobiletrends.ca
1-800-665-2955