Suite 1650 - 521 3rd Ave SW

Calgary, AB T2P 3T3

Phone: 403-264-6441 Fax: 403-264-4401

THE STIFFY HAND TOOL (Patent Pending):

THE ANSWER TO THE “HANDS-OFF” POLICY

The Stiffy Hand Tool was engineered by FiberTex & Supply, Inc. and has been designed

as the HANDS FREE solution to help operators and HSE Managers mitigate hazardous

incidents that can occur during the movement of various materials being loaded on/off

and throughout the rig. When used effectively and as designed, the Stiffy Hand Tool provides a

buffer zone of safety where rig personnel can guide, maneuver, spot and land suspended loads

and work drill pipe on the platform.

Operators now have a way to mitigate risk by equipping and training workers to not place

themselves in danger or working in an unsafe proximity to or under hazardous suspended loads.

Applications • Drilling platforms: offshore and onshore, loading and unloading trucks

• “Hands Free” Guiding, spotting and landing suspended loads

• Maneuvering drill pipe and all types of tubular on pipe racks or on the platform

• Snagging taglines and sling legs

Ratings • Load testing: Static Pull = 400 lbs. / Compression = 600 lbs

• The Stiffy Hand Tool is not designed as a lifting or load bearing tool

• Major components tested to American Society for Testing and Materials (ASTM )

standards

• Country of origin: USA

Tool Material

• Rubber lining on “V” to improve grip

• Opposing grab hook to help with maneuvering of cable slung loads

• Tool shaft is made of strong, hi-viz fiberglass

• The “V” shaped head is constructed of durable nylon resin

Instructions for use • Always wear proper personal protective equipment as the job requires

• Inspect the tool before each use and use both hands when operating tool

• Stand with both feet firmly planted on the ground and use only in straight push /pull

applications

• Inspect and clean tool after each use and store in clean, dry environment

Warnings • Do not use the tool if damaged

• Do not use tool while tired or under the influence of drugs, alcohol, or medication

• Do not over reach

• Do not use as a pry bar

Inspection and maintenance • Inspect the tool before each use

• Inspect all components of the tools for damage and wear

• Clean tool after each use and store in clean, dry environment

• If tool has been damaged: report - remove - replace

THE STIFFY HAND TOOL – Patent Pending

The Stiffy Hand Tool (42”-50”-72”) provides hands off solutions in the following ways:

• Provides a safe working distance

between employees and loads

• Keeps employee’s hands off pipe

bundles

• Assists in arranging loads

• Assists with directing loads of

suspended tubular

• Provides a safe working distance

while layering tubular on the

pipe rack

• Assists with the retrieving of

sling legs

• Allows load’s to be landed safely

• Assists with performing tubular

lay-down tasks

• Assists with arranging of tubular

before loading into the pipe rack.

• Eliminates the need for

employees to be on top of tubular

When using Stiffy Hand Tool, follow these important safety precautions:

1. Do not force the tool and use it as a push/pull tool

2. Maintain tools with care and inspect regularly

3. After use, clean your Stiffy Hand Tool and store in a dry environment

4. Always use the safety D-handle and hand guard as provided

5. Stay alert, watch what you are doing and use common sense when using the Stiffy

Hand Tool

6. Do not use tool while tired or under the influence of drugs, alcohol, or

medication.

7. Do not overreach. Keep proper footing and balance at all times.

8. Safety equipment (eye protection, dust mask, nonskid safety shoes, hard hat,

hearing protection) should be used for appropriate conditions