the sewing sewing station stationss228325144.onlinehome.us/clients/martelli/sewing_station... ·...
TRANSCRIPT
Tighten the remainder of the frame assembly bolts.
Loosen the frame assembly bolts.
Start with the Table Top upside down on floor or work surface. Align frame assembly with the pre-drilled holes. Attach table frame to bottom side of table top using Screws B (x12).
Ensure that all 12 of Screw B are fastened tightly.
Fasten controller with Screws A (x2).
54
1
3
What you will need: • #2 Phillips Head
screwdriver or driver bit • Standard straight blade
screw driver
x2 x12
SEWING STATION Assembly Directions
x1 Sewing Station Top
Screws
Hardware provided:•1 Sewing Station Table Top •Frame
A B
2
THE SEWING STATIONS Assembly Guide
EXECUTIVE
SEWING STATION
SIGNATURE
SEWING STATION
Visit us online at:martellinotions.com
facebook.com/martellinotionsinstagram.com/martellinotionsJoin Martelli Quilters Group on Facebook to be a part of a wonderful community of quilters that share in their
knowledge of quilting and Martelli Products