the patent office

The Patent Office Journal 04/01/2008 1

¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ �úÖ

¿ÖÖÃÖ�úßµÖ •Ö−ÖÔ»Ö

OFFICIAL JOURNAL

OF

THE PATENT OFFICE

×−Ö�ÖÔ Ö−Ö ÃÖÓ. 01/2008 ¿Öã�Îú¾ÖÖ¸ü ×¤ü−ÖÖÓ�ú: 04/01/2008 ISSUE NO. 01/2008 FRIDAY DATE: 04/01/2008

¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ �úÖ ‹�ú ¯ÖÏ�úÖ¿Ö−Ö PUBLICATION OF THE PATENT OFFICE


INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005

effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under the

Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings on

Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on this

Official Journal and other information as required by the public should be addressed to the Controller General of

Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can

be enriched.

(V.RAVI) Controller General of Patents, Designs & Trade Marks

4th JANUARY , 2008


CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION : 4-5

SPECIAL NOTICE : 6-7

EARLY PUBLICATION (DELHI ) : 8

EARLY PUBLICATION (MUMBAI ) : 9-20

PUBLICATION AFTER 18 MONTHS (DELHI) : 21-257

PUBLICATION AFTER 18 MONTHS (CHENNAI) : 258-276

PUBLICATION AFTER 18 MONTHS (KOLKATA) : 277-331

PUBLICATION UNDER SECTION 43(2) IN RESPECT

OF THE GRANT (DELHI)

: 332-338


OF THE GRANT (MUMBAI)

: 338


OF THE GRANT (KOLKATA)

: 339-341


THE PATENT OFFICE PATENT

KOLKATA, 04/01/2008 Address of the Patent Offices/Jurisdictions

The following are addresses of the all Patent Offices located at different places having their Territorial Jurisdiction on a Zonal basis as shown below:-

1. Office of the Controller General of Patents, Designs & Trade Marks,

Bhoudhik Sampada Bhavan, Near Antop Hill Head Post Office, S.M. Road, Antop Hill, Mumbai-400037, Phones : 022-24123311, Fax : 022-24123322

E-mail: [email protected]

4.GOVERNMENT OF INDIA THE PATENT OFFICE INTELLECTUAL PROPERTY RIGHTS BUILDING INDUSTRIAL ESTATE SIDCO RMD GODOWN AREA, ADJACENT TO EAGLE FLASK G.S.T ROAD, GUINDY, CHENNAI – 600 032 Chennai - 600 032. Ph: (044) 2232-2824/2825 Fax: (044) 2232-2878 E.mail: [email protected] The States of Andhra Pradesh, Karnataka, Kerala, Tamilnadu and Pondicheri and the Union Territories of Lakshadweep.

2. THE PATENT OFFICE, GOVERNMENT OF

INDIA BOUDHIK SAMPADA BHAVAN NEAR ANTOP HILL POST OFFICE, S.M ROAD,ANTOP HILL,

MUMBAI – 400 037 PHONE NO. (022) 24137701 Fax: (022) 24130387

E-MAIL – [email protected] � The States of Gujarat, Maharashtra, Madhya

Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli.

3. The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi – 110075 Tel.: (011) 28081921 – 25 Fax: (011) 2808 1920 E.mail: [email protected]

� The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Panjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.

5. Patent Office (Head Office), The Patent Office, Government of India BOUDHIK SAMPADA BHAVAN, CP-2 SECTOR - V KOLKATA- 700 091 INDIA. Phone: (91)(33)2367 1943/44/45/46/87 Fax: (91)(33)2367 1988 E-Mail : [email protected], Website: http://www.ipindia.nic.in www.patentoffice.nic.in

� Rest of India

All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the Patent Office.Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.


¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ

‹�úÃ¾Ö �úÖê»Ö�úÖŸÖÖ, ×¤ü−ÖÖÓ� 04/01/2008 �úÖµÖÖÔ»ÖµÖÖë �êú �Öê¡ÖÖ×¬Ö�úÖ¸ü �êú ¯ÖŸÖê

¯Öê™ëü™ü †×¬Ö×−ÖµÖ´Ö, 1970 ŸÖ£ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) †×¬Ö×−ÖµÖ´Ö, 2005 †£Ö¾ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) ×−ÖµÖ´Ö, 2006 «üÖ¸üÖ ¾ÖÖÓ×”ûŸÖ ÃÖ³Öß †Ö¾Öê¤ü−Ö, ÃÖæ“Ö−ÖÖ‹Ñ, ×¾Ö¾Ö¸ü7Ö µÖÖ †−µÖ ¤üÃŸÖÖ¾Öê•Ö µÖÖ �úÖê‡Ô ¿Öã»�ú ¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ �êú �êú¾Ö»Ö ˆ¯ÖµÖãŒŸÖ �úÖµÖÖÔ»ÖµÖ ´Öë Ã¾Öß�éúŸÖ ÆüÖë�Öê … ¿Öã»�ú: ¿Öã»�ú µÖÖ ŸÖÖê −Ö�ú¤ü ºþ¯Ö ´Öë µÖÖ "Controller of Patents" �êú −ÖÖ´Ö ´Öë ¤êüµÖ ²Öï�ú ›ÒüÖ°™ü µÖÖ “Öê�ú �êú «üÖ¸üÖ ³Öê•Öß •ÖÖ ÃÖ�úŸÖß Æîü •ÖÖê ˆÃÖß Ã£ÖÖ−Ö �êú ×�úÃÖß †−ÖãÃÖæ×“ÖŸÖ ²Öï�ú ´Öë ¯ÖÏ¤ü¢Ö ÆüÖê •ÖÆüÖÑ ˆ¯ÖµÖãŒŸÖ �úÖµÖÖÔ»ÖµÖ ÛÃ£ÖŸÖ Æïü…

1. �úÖµÖÖÔ»ÖµÖ: ´ÖÆüÖ×−ÖµÖÓ¡Ö�ú, ‹�úÃ¾Ö, †×³Ö�ú»¯Ö ŸÖ£ÖÖ ¾µÖÖ¯ÖÖ¸ü ×“ÖÅ−Ö,

‹−Ö™üÖê Ö ×Æü»Ö ›üüÖ�ú‘Ö¸ �êú ÃÖ´Öß¯Öü, ‹ÃÖ. ‹´Ö. ¸üÖê›ü, ‹−Ö™üÖê Ö ×Æü»Ö, ´Öã ²Ö‡Ô - 400 037, ³ÖÖ¸üŸÖ.

±úÖê−Ö:: (022) 24123311 ±îúŒÃÖ: (022) 24123322 E-mail: [email protected]

4. ¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ “Öê®Ö‡Ô, ‡Ó™êü»ÖêŒ“Öã†»Ö ¯ÖÏÖê Ö™üá ¸üÖ‡™ËüÃÖ ×²ÖÜ»›üWÖ ‡Ó›üÛÃ™ÒüµÖ»Ö ‡Ã™êü™ü ‹ÃÖ†Ö‡Ô›üßÃÖß†Öê †Ö¸ü‹´Ö›üß WÖÖê›üÖˆ−Ö ‹×¸üµÖÖ ‹›ü•ÖÃÖê−™ü ™ãü ‡ÔWÖ»Ö °»ÖÖÃ�ú •Öß.‹ÃÖ.™üß. ¸üÖê›ü, WÖÖµÖ−›üß, “Öê®Ö‡Ô - 600 032. ±úÖê−Ö: (044) 2232-2824/2825 ±îúŒÃÖ: (044) 2232-2878 ‡Ô.´Öê»Ö: [email protected]

� †Ö−¬ÖÐ ¯ÖÏ¤êü¿Ö, �ú−ÖÖÔ™ü�ú, �êú¸ü»Ö, ŸÖ×´Ö»Ö−ÖÖ›ãü ŸÖ£ÖÖ ¯ÖÖÛ]›ü“Öê üß ¸üÖ•µÖ �Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ �Öê¡Ö, »Ö�Ö«üß¯Ö

2. ¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ, ³ÖÖ¸üŸÖ ÃÖ¸ü�úÖ¸ ²ÖÖî×¨ü�ú ÃÖÓ Ö¤üÖ ³Ö¾Ö−Ö,

‹−Ö™üÖê Ö ×Æü»Ö ›üüÖ�ú‘Ö¸ �êú ÃÖ´Öß¯Öü, ‹ÃÖ. ‹´Ö. ¸üÖê›ü, ‹−Ö™üÖê Ö ×Æü»Ö, ´Öã ²Ö‡Ô - 400 037, ±úÖê−Ö: (022) 2413 7701, ±îúŒÃÖ: (022) 2413 0387

‡Ô.´Öê»Ö: [email protected] � WÖã•Ö¸üÖŸÖ, ´ÖÆüÖ¸üÖÂ™Òü, ´Ö¬µÖ ¯ÖÏ¤êü¿Ö, WÖÖê†Ö ŸÖ£ÖÖ

”û¢ÖßÃÖWÖœÍü ¸üÖ•µÖ �Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ �Öê¡Ö, ¤ü Ö−Ö ŸÖ£ÖÖ ¤üß¾Ö, ¤üÖ¤ü ü †Öî ü −ÖWÖ¸ü Æü¾Öê»Öß. Ó

1. ¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ �úÖê»Ö�úÖŸÖÖ (¯ÖÏ¬ÖÖ−Ö �úÖµÖÖÔ»ÖµÖ), ²ÖÖî×¨ü�ú ÃÖÓ Ö¤üÖ ³Ö¾Ö−Ö, ÃÖß¯Öß-2, ÃÖêŒ™ü ü-V, ÃÖÖ»™ü »Öê�ú ×ÃÖ™üß, �úÖê»Ö�úÖŸÖÖ- 700 091, ³ÖÖ¸üŸÖ. ±úÖê−Ö: (91)(33)2367 1943/44/45/46/87 ±îúŒÃÖ/Fax: (91)(33)2367 1988 ‡Ô.´Öê»Ö: [email protected] ¾Öê²ÖÃÖÖ‡™ü: http://www.ipindia.nic.in www.patentoffice.nic.in

3. ¯Öê™ëü™ü �úÖµÖÖÔ»ÖµÖ ×¤ü»»Öß, ²ÖÖî×¨ü�ú ÃÖÓ Ö¤üÖ ³Ö¾Ö−Ö, ¯»ÖÖò™ü ÖÓ. 32, ÃÖêŒ™ü ü - 14, «üÖ¸ü�úÖ, Ö‡Ô ×¤ü»»Öß - 110 075. ±úÖêÖ: (011) 2808 1922, 2808 1923, 2808 1924, 2808 1925 ±îúŒÃÖ: (011) 2808 1920. ‡Ô.´Öê»Ö: [email protected]

� Æü×¸üµÖÖ]ÖÖ, ×Æü ÖÖ“Ö»Ö ¯ÖÏ¤êü¿Ö, •Ö´´Öæ ŸÖ£ÖÖ �ú¿´Öß¸ü, ¯ÖÓ•ÖÖ²Ö, ¸üÖ•ÖÃ£ÖÖ−Ö, ˆ¢Ö¸ü ¯ÖÏ¤êü¿Ö, ×¤ü»»Öß ŸÖ£ÖÖ ˆ¢Ö¸üÖÓ“Ö»Ö ¸üÖ•µÖ �Öê¡ÖÖë, ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ �Öê¡Ö “ÖÓ›üßWÖœÍü

� ³ÖÖ¸üŸÖ �úÖ †¾Ö¿ÖêÂÖ �Öê¡Ö


SPECIAL NOTICE

18 Months publication as required under Section 11A of the Patents Act, 1970

as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of

opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under section

25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules, 2006.

Notice is also given that if any interested person requests for copies of the complete specification, drawing and

abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as

per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be

obtained, the same can be provided by the respective Patent Offices on request.

(V. RAVI )

CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS


Special Notice

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005 and

Rules thereunder, Publication of the matter relating to Patents in the Official Gazette of India Part III, Section 2 has

been discontinued and instead “The Official Journal of the Patent Office” is being published containing all the

activities of The Patent Office such as publication of all the patent applications after 18th months , grant of patents

& all other information in respect of the proceedings as required under the provisions of the Patents (Amendment)

Act, 2005 and Rules thereunder on weekly basis on every Friday.

The price of each copy of the journal is Rs. 400/- (Postal charge included) in paper form and Rs. 250/-(Postal

charge included) in CD-ROM form, while annual subscription of the journal for a calendar year 2008 is Rs.

20,000/- (Postal charge included) in paper form and that is Rs. 12,000/- (Postal charge included) in CD-ROM

form. There will be 52 issues in a calendar year. The annual subscription for the Year 2008 is required to be paid

in advance in any of the Patent Offices located at Kolkata, New Delhi, Mumbai and Chennai.

A request on plain paper addressed to the Controller of Patents should be made for supply of the Journals

accompanied by payment for annual subscription/Single copy either in cash or cheque(at par)/Demand Draft drawn

in favour of the Controller of Patents, payable at the respective Office. Other mode of payment i.e. M.O/I.P.O. or

any out station cheque will not be accepted. The request for annual subscription (CD-ROM/paper form)or

subscription of single copy in paper form should be made before 31 st JANUARY, 2008.

SPECIAL NOTICE

Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act. However,

if duplication of publication of any application is found, then earlier date of publication will be taken for the

purpose of provisional protection for applicant and Patent Office will grant Patent not before six months from the

date of second publication, provided that there is there is no third party representation.


Early Publication:

The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule 24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006: (12) PATENT APPLICATION PUBLICATION (21) Application No.985/DEL/2007 A

(19) INDIA

(22) Date of filing of Application :07/05/2007 (43) Publication Date : 04/01/2008

(54) Title of the invention : "LAMINATED PAINT MASKING MEMBER"

(51) International classification :B05D1/32 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA

(87) International Publication No :NA (61) Patent of Addition to Application Number Filing Date

:NA :NA

(62) Divisional to to Application Number Filing Date

:NA :NA

(71)Name of Applicant :

1)SUMAX ENGINEERING (P) LIMITED Address of Applicant :1521, ANSAL TOWER, NEHRU PLACE NEW DELHI, 110019 INDIA Delhi India (72)Name of Inventor :

1)MEHTA SUDEEP

(57) Abstract : A laminate for use in coloring of articles/objects comprising of a substrate of predetermined thickness and characterized in that said substrate is provided with a coating of polyethylene in at least one side, said substrate being crepe paper.


(12) PATENT APPLICATION PUBLICATION (21) Application No.1357/MUM/2007 A

(19) INDIA


(54) Title of the invention : UTILIZATION OF DISTILLER WASTE LIQUOR EMANATING FROM SODA ASH PLANT

(51) International classification :C22B26/10 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA

(87) International Publication No : NA (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA


1)NIRMA LIMITED Address of Applicant :NIRMA HOUSE, ASHRAM ROAD, AHMEDABAD-380 009, Gujarat India (72)Name of Inventor :

1)PATHAK KAILASHNANDAN CHANDRABALI 2)VASHISHTHA NATVERLAL DESAI

(57) Abstract : A process for utilization of distiller waste liquor emanating from soda ash plant for recovering harvestable marine grade gypsum and solar salt having crystalline nature where in distiller waste liquor emanating from soda as plant settled in setting ponds to obtain clear effluent containing 125-150g/l of calcium chloride and sodium chloride, desulphatation of sea water is carried out by mixing clear effluent with sea water of density in range of 6-8ºBe’,resulting sea water taken into solar pan us evaporated till density of 24-25ºBe’is reached, harvestable gypsum gets deposited in solar pans and is harvested between 8-12ºBe’ and further at 12-24ºBe’, residual brine of 24-25ºBe’ is further allowed to solar evaporate till 27-29ºBe’ to crystallize salt between 24-29ºBe’ and thereby obtaining magnesium chloride-rich end bittern of 27-29ºBe’.



(19) INDIA


(54) Title of the invention : A BUILDING PANEL AND BUILDING STRUCTURE MADE THEREOF

(51) International classification :E04C1/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)VISHAL MODI Address of Applicant :15, PRACHI, 5th FLOOR, 90 FEET ROAD, NEAR PANCHOLI HOSPITAL, NATHPAI NAGAR, GHATKOPAR (E), MUMBAI 400 077, Maharashtra India (72)Name of Inventor :

1)VISHAL MODI

(57) Abstract : The present invention relates to the building panels for construction industry so as to replace conventional building material such as brick etc. The building panel of the present invention comprises a pair of wire mesh, each wire mesh is made by welding plurality of vertical and cross members of the wires; an expanded polystyrene core being sandwiched between said wire meshes; and connecting wires to connect said wire meshes. In such panels the connecting wire is pierced completely through polystyrene core at offset angles for providing better strength and welded to each of the outer layer of the side surface of said wire meshes to form a building panel. This panel is light weight, environmental friendly, easy to store and transport. This panel is economical and protects the civil structure from external weather conditions and noise. Also the building structure made of such building panels is disclosed.



(19) INDIA


(54) Title of the invention : SUMP PUMPS

(51) International classification :E21B43/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)KIRLOSKAR BROTHERS LIMITED Address of Applicant :Udyog Bhavan, Tilak Road, Pune-411002, Maharashtra India (72)Name of Inventor :

1)R. K. SRIVASTAVA 2)J. T. KSHIRSAGAR 3)S. M. SHUKLA

(57) Abstract : An arrangement for drawing fluid from a sump, comprising a pump, a draft tube extending from the pump into the sump, said draft tube having an opening within the sump and a canopy defined by roof and side walls surrounding said opening.



(19) INDIA


(54) Title of the invention : SYSTEM FOR SEPARATION OF GASEOUS COMPONENTS IN PUMPS


:NA :NA


:NA :NA


:NA :NA


1)MIDCO LIMITED Address of Applicant :METRO ESTATE, VIDYANAGARI MARG, KALINA, MUMBAI-400 098, Maharashtra India (72)Name of Inventor :

1)ADHIKARI ABHISHEK DILIP

(57) Abstract : The present invention relates to a system for separation of gaseous elements from fluid in pump comprising inlet provision for the fluid adapted to receive pumped fluid from the pumping chamber of the pump; a contoured surface passage preferably in one or plurality of half circle spirals adapted and dimensioned to fit to the said inlet provision; a conduit coaxially aligned in connection with the said contoured surfaced passage wherein one of the ends of the said conduit is adapted to fit the said passage and the other end is adapted to fit the fluid outlet and accumulation provision; gaseous element venting provided on the said accumulation provision wherein pumped fluid from the said fluid inlet provision enters the said contoured surfaced passage wherein angular velocity of the fluid and hence centrifugal force is substantially increased resulting in rotation of every single particle axis of the vortex motion because of the said contour, resulting in separation of the gaseous element wherein the gaseous element separated fluid is accumulated in the said accumulation provision.



(19) INDIA


(54) Title of the invention : DEVICE FOR PREVENTION OF FLUID OVERFLOW IN POSITIVE DISPLACEMENT PUMPS HAVING PROVISION FOR GASEOUS COMPONENTS SEPARATION

(51) International classification :F04D19/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)MIDCO LIMITED Address of Applicant :METRO ESTATE, VIDYANAGARI MARG, KALINA, MUMBAI-400 098, Maharashtra India (72)Name of Inventor :

1)ADHIKARI ABHISHEK DILIP

(57) Abstract : The present invention relates to fluid overflow prevention system capable of being integrated with positive displacement pump/s that has provision for separation of gaseous elements in the fluid. In particular the invention relates to a fuel pump integrated with the system to prevent fluid overflow along with a system to separate gaseous element from a fuel.



(19) INDIA


(54) Title of the invention : OVERRIDE MECHANISM FOR ELECTRIC GEARSHIFT SYSTEM AND METHOD OF MANUFACTURING OVERRIDE MECHANISM THEREOF

(51) International classification :F16K1/22 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)TATA MOTORS LIMITED Address of Applicant :BOMBAY HOUSE, 24 HOMI MODY STREET, HUTATMA CHOWK, MUMBAI 400 001, Maharashtra India (72)Name of Inventor :

1)SRINIVASA RAJU GAVARRAJU 2)ASHFAQUE AHMED ANSARI

(57) Abstract : This invention relates to the Override Mechanism for Electric Gearshift System and Method of manufacturing override mechanism thereof. Override mechanism for electric gearshift system in accordance with this invention basically comprises of pre loaded compression means, pre loaded torsion means, gearshift lever, gearshift shaft, locking means for gear shift lever, stopper for gear shift lever and plurality of washers, wherein said torsion means is provided on said gear shift shaft at connecting end to gear shaft, one end of said torsion means is adopted to be fixed to gear box casing and other end is fixed to gear shift shaft through first washer, said gear shift shaft is provided with second washer adjacent to said torsion means towards connecting end to gear shaft to prevent sliding off of said torsion means, said compression means is provided on said gear shift shaft and placed adjacent to said first washer, said gear shift lever adopted to be meshed with actuator gear is provided on said gear shift shaft adjacent to said compression means with a provision of locking and unlocking on said gear shift shaft, said gear shift shaft is provided with a stopping means to prevent the sliding away of said gear shift lever. During normal operation override mechanism is connected to gear shaft and one end of said torsion means is fixed to the gear box casing after preloading and gear shift lever is engaged with actuator gear of electric gear shift system. In case of failure of electric gearshift system, the said locking means is required to be removed by the driver. Because of removal of said locking means the compression means pushes the gearshift lever towards the stopper end which disengages the gearshift lever from the actuator gear. Then the said torsion means forces the gearshift shaft to rotate to enable the gear to engage in pre-decided position.



(19) INDIA


(54) Title of the invention : IMPROVED ADDITIVE HOLDER CAP WITH PROTECTIVE FLAP


:NA :NA


:NA :NA


:NA :NA


1)NAND SUNIL MADHUSUDAN Address of Applicant :NAND CHAMBERS, KEDIA PLOTS, CONVENT ROAD, AKOLA-444005, Maharashtra India (72)Name of Inventor :

1)NAND SUNIL MADHUSUDAN

(57) Abstract : A additive holder cap for bottles or the like containers comprising of a cap body having a cavity or space formed therein, adopted for filling additive/medicated additive or like any food material in liquid, semi solid, paste or powder form, the lower part of the main cap body being provided with internal threads matching with the external threads on the neck of the bottle, a central shaft is integrally moulded or fixed at one end to the inside top surface of the said main cap body, and the other free end of the said shaft being provided with peripheral sharp teeth. At lower end of the surface of the main cap having wall thickness such that by pressing the top surface from top side, displaces as a whole top surface along with the central shaft down thereby tearing the inner seal where this inner seal is provided for closing the passage formed in the lower surface of the main cap, in between the said cavity and the bottle and top part of the main cap is molded in such way that it has pivoted side protective flap & these are locked in groove body of the top cap which acts as the protective flap to the main cap & restricts the downward movement of top surface.



(19) INDIA


(54) Title of the invention : AN AUTOMOBILE

(51) International classification :B65G35/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)PREMIER LIMITED Address of Applicant :58, NARIMAN BHAVAN, NARIMAN POINT, MUMBAI 400 021, Maharashtra India (72)Name of Inventor :

1)MAITREYA VINOD DOSHI

(57) Abstract : The invention provides an automobile equipped with a 4 cycle diesel engine with right hand side vehicle control by providing steering at right hand side of the automobile, Wherein the automobile is provided with 4 speed manual transmission gearbox having final gear ratio of 4.1 and having engine displacement of the automobile 2000cc, and maximum engine output of the engine is 58 HP @ 4500 RPM, and Maximum torque of the engine is 11.28 KGM @ 3000 RPM.



(19) INDIA


(54) Title of the invention : NAK MESSAGE TRANSMISSION WITH QUICKNAK INDICATION

(51) International classification :H04M3/42 (31) Priority Document No :11/622,086 (32) Priority Date :11/01/2007(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)VIA TELECOM CO. LTD. Address of Applicant :ZEPHYR HOUSE, MARY STREET, P.O.BOX 709, GERORGE TOWN, GRAND CAYMAN, CAYMAN ISLANDS, British West Indies (72)Name of Inventor :

1)SEUNGJUNE YI

(57) Abstract : System and method for processing received packets. A QuickNak (QN) packet may be received. The QN packet may include a segmentation and reassembly (SAR) packet. The SAR packet may be delivered to a SAR receiver and it may be determined if there are missing packets, e.g., after delivery of the SAR packet. If there are missing packets, a QN indication may be generated and provided to the SAR receiver. Alternatively, the SAR receiver may receive the SAR packet with the QN indication. Accordingly, the SAR packet may be stored in a reception buffer or delivered to an upper layer, e.g., depending on current state variables. The SAR receiver may update the state variables and determine if there are missing packets. If there are missing packets, the SAR receiver may deliver an indication of the missing packets.



(19) INDIA


(54) Title of the invention : ALOE VERA (L.) BURM. F. SEEDS AND ITS OIL PROPERTIES

(51) International classification :A61K7/48 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)MAMMEN DANIEL Address of Applicant :A 4/21, PARSHWANAGAR SOCIETY, VASNA ROAD, VADODARA- 390015, Maharashtra India 2)PADAMANABHI SHANKER NAGAR (72)Name of Inventor :

1)MAMMEN DANIEL 2)PADAMNABHI SHANKER NAGAR

(57) Abstract : Aloe vera has been used as a cosmetic and medical remedy since ancient times and has gained increasing popularity in recent years. Despite its widespread use of Aloe vera, reports on Aloe vera seed and seed oil is lacking. The present paper claims the composition of Aloe vera seed oil and the feasibility of making Biodiesel and its properties, as well as preparing soaps using the seed oil fully or partially in combination with other oils.



(19) INDIA


(54) Title of the invention : INFORMATION CAPTURING AND RELAY MODULE

(51) International classification :G06F3/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SHAILESH MOTWANI Address of Applicant :305, MAHESH VILLA CHS, GILBERT HILL ROAD, BEHIND ANDHERI RECREATION CLUB, ANDHERI (W), MUMBAI-400 058, Maharashtra India (72)Name of Inventor :

1)SHAILESH MOTWANI

(57) Abstract : The module/device is self-service device comprising, input medium basically two sets of keys, one set as selection keys and other set of matrix keys to enter the requisite information. Display screen in terms of GLCD/ULCD screen to display series of information gathering queries also doubling up as information relaying screen, Transfer interface to transfer information gathered from the module to the back-office by convenient available medium and necessary software to run the hardware.



(19) INDIA


(54) Title of the invention : AN IMPROVED JAGGERY PLANT

(51) International classification :C13J (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)AJIT BALKRISHNA SHINDE Address of Applicant :AT & POST: KOCHI, TALUKA: KAVATHEMAHANKAL, DIST SANGLI-416405, Maharashtra India (72)Name of Inventor :

1)AJIT BALKRISHNA SHINDE

(57) Abstract : An improved Multiplan jaggery plan is provided herein in the present invention wherein the said evaporation pans are either square or rectangular instead of traditional circular evaporation pans and are held on incremental heights in the combustion chamber to facilitate the juice flow from the upper to lower pan during the process of concentration with mechanical means for transfer of the juice automatically using the gravitational force for greater safety. There is a provision of rectangular or like shaped slot along with slot cover to control the air flow supply so as to achieve complete combustion of fuel results into clean exhaust smoke and making the plant as Eco-friendly.


Publication After 18

th Month :

The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any Person

may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of the patent

in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The Patents

(Amendment) Rules, 2006:

(12) PATENT APPLICATION PUBLICATION (21) Application No.1061/DEL/2001 A

(19) INDIA


(54) Title of the invention : "AN IMPROVED PROCESS FOR THE PREPARATION OF α-HYDROXY KETONE"

(51) International classification :C07C 27/00

(31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)COUNCIL OF SCIENTIFIC AND INDUSTRIAL

RESEARCH Address of Applicant :RAFI MARG, NEW DELHI-110001, INDIA. Delhi India (72)Name of Inventor :

1)VAISHALI CHAKRABORTY 2)MANABJYOTI BORDOLOI

(57) Abstract : This invention relates to a process for the production of α-hydroxyketone. The present method particularly relates to an improved process for the stereo-selective, regio-selective and chemoselective production of α-hydroxyketone or 1,2-ketol from the corresponding oxiranes. These compounds containing α-hydroxyketone or 1,2-ketol, are useful auxiliaries or intermediates in the production of value-added natural products, antitumour agents, antibiotics, pheromones, contrast agent for magnetic resonance imaging (MRI) and fine chemicals. The hitherto known process of the preparation of such compounds employ generally metachloroperoxybenzoic acid, dimethyl sulfoxide (DMSO), dimethyloxiranes, TMSOTf, TBDMSTf, N-sulfonyl oxiridiens, etc. The process also gives stereoselective, chemoselective and regioselective products and thereby the process will have wide scope for application in the synthesis of α-hydroxyketone or 1,2-ketol.



(19) INDIA


(54) Title of the invention : NOVEL BIOACTIVE FRACTIONS FROM A NOVEL HERBAL EXTRACT OF SALICORNIA SPECIES HAVING ANTITUBERCULAR ACTIVITY

(51) International classification :A61K 035/78


:NA :NA


:NA :NA


:NA :NA


1)COUNCIL OF SCIENTIFIC INDUSTRIAL RESEARCH Address of Applicant :ANUSANDHAN BHAWAN 2, RAFI MARG, NEW DELHI-110001, INDIA. Delhi India (72)Name of Inventor :

1)MEENA RAJNIKANT RATHOD 2)BHUPENDRA DHANVANTRAI SHETHIA 3)JAYANT BATUKRAI PANDYA 4)PUSHPITO KUMAR GHOSH 5)PRAKASH JAGUBHAI DODIYA 6)BRAHM SHANKER SRIVASTAVA 7)RANJANA SRIVASTAVA 8)ANIL SRIVASTAVA 9)VINITA CHATURVEDI

(57) Abstract : The present invention relates to novel extracts of Salicornia species. The present invention particularly relates to novel extracts of Salicornia species which show anti-tubercular activity. The present invention also relates to a process for the preparation of novel extracts of Salicornia species with anti-tubercular activity and also to the use thereof for the treatment of tuberculosis.



(19) INDIA


(54) Title of the invention : "A COMBINATION OF A CYLINDER LOCK AND A KEY FOR THE LOCK"

(51) International classification :E05B 29/00

(31) Priority Document No :982066 (32) Priority Date :25/09/1998(33) Name of priority country :Finland (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)ABLOY OY Address of Applicant :WAHLFORSSINKATU 20, FIN-80100 JOENSUU, FINLAND. Finland (72)Name of Inventor :

1)PEKKA MIELONEN 2)SEPPO KIISSSKI

(57) Abstract : A combination of a cylinder lock and a key (2) for the lock, the cylinder lock comprising a lock body (1), a turnable lock cylinder (3) located inside the lock body (1) and having a slot (8) therein, a set of locking discs (4, 6) located inside the lock cylinder (3) and each provided with at least one peripheral notch (4b, 6b) determining the opening combination of the lock and with an opening (4a, 6a) for receiving the key, and a locking bar (7) which, in a locking position, prevents turning of the lock cylinder (3) relative to the lock body (1), the key (2) having a combination surface for each locking disc (4, 6), the combination surfaces being arranged so that, on insertion of the key into the lock and turning of the key, the locking discs (4, 6) are turnable into positions, in which their peripheral notches (4b, 6b) form a uniform channel at the position of the locking bar (7) and the said slot (8) in the lock cylinder (3) into which the locking bar (7) can enter to release the lock cylinder (3) for turning relative to the lock body (1), whereby at least one of the locking discs (4) has a key opening (4a) which includes at least two separate counter surfaces (4all, 4al2) which can be arranged, in cooperation with one combination surface of the key (2) corresponding to said locking disc (4), to turn the locking disc (4) into the opening position of the lock starting from the same initial position of the key (2), characterised in that said counter surfaces (4all, 4al2) in the key opening (4a) of said at least one locking disc (4) are so dimensioned and arranged relative to each other that for part of at least one of the counter surfaces (4all, 4al2) at least two different combination values can be selected for the corresponding combination surface of the key (2).



(19) INDIA


(54) Title of the invention : "DOUBLE-CONE MIXER WITH BAFFLES"

(51) International classification :B01F7/16 (31) Priority Document No :06013181.0 (32) Priority Date :27/06/2006

(33) Name of priority country :EUROPEAN UNION

(86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)WOLFF CELLULOSICS GMBH & CO.KG Address of Applicant :D-29656 WALSRODE,GERMANY Germany (72)Name of Inventor :

1)MARTIN KOWOLLIK 2)ANDREAS ROGENHOFER 3)WOLFGANG DANNHORN 4)ERIK-ANDREAS KLOHR

(57) Abstract : The present invention relates to a novel double-cone mixer, if necessary of enamelled construction, and its use in the production and/or processing of polysaccharide products, preferably based on cellulose.



(19) INDIA


(54) Title of the invention : "SYSTEMS AND METHODS FOR REFINING IDENTIFICATION OF CLINICAL CANDIDATES"

(51) International classification :G06Q (31) Priority Document No :60/804,738 (32) Priority Date :14/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)GENERAL ELECTRIC COMPANY Address of Applicant :ONE RIVER ROAD, SCHENECTADY, NEW YORK 12345, USA U.S.A. (72)Name of Inventor :

1)SETTIMI PHILIP D.

(57) Abstract : Certain embodiments of the present invention provide systems and methods for refining ths identification of study candidates. In an embodiment, the method (1100) may include receiving (1110) a plurality of clinical conditions at a user interface. The conditions may generally be tied to codified terms in electronic medical patient records. The method may also include receiving (1120) parameters for tailoring a search of electronic medical data for the clinical conditions. For example, the parameters may weight the conditions and may include ranking the conditions, determining whether the conditions are mandatory for the pool, and determining a percentage deviation for numerical ranges. The method may also include executing (1130) an optimization function to create a pool according to the specified conditions and parameters The method may also include displaying (1140) the pool in an order from the most optimal results to the least optimal results.



(19) INDIA


(54) Title of the invention : "SYSTEM DESIGN AND COOLING METHOD FOR LP STEAM TURBINES USING LAST STAGE HYBRID BUCKET"

(51) International classification :F01P7/00 (31) Priority Document No :11/452,403 (32) Priority Date :14/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)GENERAL ELECTRIC COMPANY Address of Applicant :ONE RIVER ROAD, SCHENECTADY, NEW YORK 12345, USA. U.S.A. (72)Name of Inventor :

1)BURDGICK STEVEN SEBASTIAN 2)LANAUD CHRISTOPHE 3)FINNIGAN PETER MICHAEL 4)LIN WENDY WEN-LING

(57) Abstract : A steam turbine system for use in conjunction with hybrid last stage(s) LP buckets (24). The system is adapted to cool the bucket tip region (20, 24) during low VAN windage conditions whereby the beneficial design and efficiency outcomes of the use of hybrid blades can be realized.



(19) INDIA


(54) Title of the invention : "A DEVICE FOR MEASUREMENT OF VOLUME RESISTIVITY OF ELECTRO MAGNETIC INTERFERENCE SHIELDING GASKETS"

(51) International classification :G01D 21/00


:NA :NA


:NA :NA


:NA :NA


1)THE ADDITIONAL DIRECTOR Address of Applicant :DEFENCE RESEARCH & DEVELOPMENT ORGANISATION MINISTRY OF DEFENCE, GOVT OF INDIA, B-341, SENA BHAWAN, DHQ P.O. NEW DELHI-110011, INDIA. Delhi India (72)Name of Inventor :

1)SANKALAPURAM POMPAPATHY

(57) Abstract : "A device for measurement of volume resistivity of Electro Magnetic Interference shielding gaskets". This invention relates to a device for measurement of volume resistivity of Electro Magnetic Interference shielding gaskets comprising of a pressure pad assembly supported on a base plate; a handle, for varying the pressure on a test gasket; a first or lower electrode connected to said pressure pad assembly and a second or upper electrode connected to said handle through a power screw, a pair of leads connecting said electrodes to ammeter and voltmeter respectively.



(19) INDIA


(54) Title of the invention : "HERBACEUS BOTANICAL PRODUCTS."

(51) International classification :A61K 35/78 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA

(62) Divisional to Application Number Filed on

:502/DEL/2001 :17/04/2001


1)SQUIRES MERYL J. Address of Applicant :2 GOOSE LAKE DRIVE, BARRINGTON, ILLINOIS 60010, U.S.A. U.S.A. (72)Name of Inventor :

1)SQUIRES MERYL J.

(57) Abstract : A product comprising a plant and a surfactant, characterized in that the plant comprises a herbaceous botanical of the genus Echinacea and the surfactant comprises benzalkonium halide.



(19) INDIA


(54) Title of the invention : "WRITING INSTRUMENT WITH SHAPE MEMORY ACTUATING MEANS"

(51) International classification :G06F17/00 (31) Priority Document No :06425454.3 (32) Priority Date :30/06/2006



:NA :NA


:NA :NA


:NA :NA


1)C.R.F. SOCIETA CONSORTILE PER AZIONI Address of Applicant :STRADA TORINO 50, I-10043 ORBASSANO (TORINO)ITALY. Italy (72)Name of Inventor :

1)ALACQUA STEFANO 2)BIASIOTTO MARCO

(57) Abstract : A writing instrument comprises shape memory actuating means for switching from an inoperative condition of the writing tip (8) to an operative condition, and vice versa.



(19) INDIA


(54) Title of the invention : INCLUSION COMPLEXES OF CYCLIC MARCROMOLECULAR COMPOUNDS AND POLYMERIZATION THEREOF

(51) International classification :C08B 37/16


:NA :NA


:NA :NA


:NA :NA


1)COUNCIL OF SCIENCETIFIC & INDUSTRIAL


1)MOHAN GOPALKRISHNA KULKARNI 2)ROHINI NITIN KARMALKAR, 3)SUNITA SURYAKANT SATAV

(57) Abstract : The present invention relates to an inclusion complex containing monomers with multiple unsaturated and cyclic compound s represented by the general formula Ax By wherein the monomer containing X units of vinyl unsaturation and B is a cyclic host compound with Y units, and also, a process for the preparation of soluble homo-polymers with unsaturation group from the inclusion complex.



(19) INDIA


(54) Title of the invention : "VEHICLE HEADLAMP WITH TWO LIGHT SOURCES"

(51) International classification :B60Q 1/04 (31) Priority Document No :0605364 (32) Priority Date :15/06/2006(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)VALEO VISION Address of Applicant :34, RUE SAINT ANDRE, 93012 BOBIGNY CEDEX, FRANCE France (72)Name of Inventor :

1)REMI MAILLARD AND CYRIL-HERBIN

(57) Abstract : The invention relates to a vehicle headlamp (10) with two light sources, comprising a first rear light reflector (R1), which is associated with a first light source (S1) in order to produce a first light beam towards the front, said headlamp (10) having a second front light reflector (R2), which is associated with a second point light source (S2) in order to produce a second light beam towards the front, characterised in that the front reflector (R2) is arranged in front of the rear reflector (R1) and in that the front reflector (R2) comprises a window (20) through which at least part of the first light beam can be distributed.



(19) INDIA


(54) Title of the invention : "METHOD OF MANAGING REQUESTS FOR REMOTE ACCESS TO MULTIMEDIA CONTENTS"

(51) International classification :H04L (31) Priority Document No :06/05886 (32) Priority Date :29/06/2006(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46, QUAI A.LE GALLO, 92100 BOULOGNE, BILLNCOURT,FRANCE France (72)Name of Inventor :

1)JEAN-FRANCOIS FLEURY 2)GILLES STRAUB 3)JEAN-BAPTISTE-HENRY

(57) Abstract : In a method of managing a request for remote access to a multimedia content (Vj), a corresponding datum stream is inserted at the instant or in a delayed manner with the set of the data streams being transmitted on a distribution network (1) as a function of a capacity threshold (Br1) of this network. Each data stream is of the variable-throughput type, with a data throughput profile (Rn(t)) corresponding, whose width (Tn) corresponds to a time of transmission of the stream. The management of the request comprises a verification that the capacity of the network is not exceeded on the width (Tn) of the profile (Rn(t)), as a function of a given instant of insertion (tO+AT), of the throughput (S(t)) of the data stream or streams in progress on the said distribution network, obtained on the basis of the throughput profiles of these streams, and of the throughput profile (Rn(t)) of the requested stream.



(19) INDIA


(54) Title of the invention : "A METHOD AND UNIT FOR PREPARING A SAMPLE FOR THE MICROBIOLOGICAL ANALYSIS OF A LIQUID"

(51) International classification :G01N33/48; G01N21/01

(31) Priority Document No :0605796 (32) Priority Date :27/06/2006 (33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)MILLIPORE CORPORATION Address of Applicant :290 CONCORD ROAD, BILLERICA, MASSACHUSETTS 01821, USA U.S.A. (72)Name of Inventor :

1)SEBASTIEN RIBAULT 2)GAEL WAICHE

(57) Abstract : The preparation unit comprises a body (2) within which are fixed a first (3) and a second (4) membrane, said first membrane (3) having a first predetermined pore diameter and said second membrane (4) a second predetermined pore diameter smaller than said first predetermined pore diameter of said first membrane (3), said body also comprising means (16, 20) for retrieving said sample collected on said second membrane (4). The method of preparing such a sample comprises the step of procuring such a preparation unit (1), the step of passing a predetermined volume of said liquid through said first membrane and through said second membrane (4) in order to collect a sample on said second membrane (4); and the step of retrieving said sample so collected on said second membrane (4).



(19) INDIA


(54) Title of the invention : "METHOD AND APPARATUS FOR DRIVING A DISPLAY DEVICE WITH VARIABLE REFERENCE DRIVING SIGNALS"

(51) International classification :H04N5/66; G09G3/20

(31) Priority Document No :06300741.3 (32) Priority Date :30/06/2006



:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46 QUAI, A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE France (72)Name of Inventor :

1)SEBASTIEN WEITBRUCH 2)RAINER SCHWEER 3)SYLVAIN THIEBAUD

(57) Abstract : A method and an apparatus capable of increasing the video depths depending on the video content of each line in order to provide a maximum of color gradation for each given scene shall be proposed. For this purpose there is disclosed an apparatus for driving a display device (16), including input means (11) for receiving a digital value as video level for each pixel or cell of a line of the display device (16), reference signalling means (19) for providing at least one reference driving signal and driving means (15) for generating a driving signal on the basis of the digital value and the at least one reference driving signal. The apparatus further includes adjusting means (18) for adjusting the at least one reference driving signal in dependence of the digital values of at least a part of the line.



(19) INDIA


(54) Title of the invention : "METHOD AND DEVICE TO DETERMINE A DESCRIPTOR FOR A SIGNAL REPRESENTING A MULTIMEDIA ITEM, DEVICE FOR RETRIEVING ITEMS IN A DATABASE, DEVICE FOR CLASSIFICATION OF MULTIMEDIA ITEMS IN A DATABASE"




:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46, QUAI A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE France (72)Name of Inventor :

1)JURGEN STAUDER 2)JOEL SIROT 3)JEAN-EMILE MARIA-ALPHONSE

(57) Abstract : The invention concerns a method and a device to determine a descriptor for a signal representing a multimedia item. The method comprises the step of applying (S1) to said signal a first bank of directional filters in order to obtain a first set of coefficients. According to the invention the method comprises the steps of: - applying (S2) to said signal a second bank of filters in order to obtain a second set of coefficients representing the low-pass filtered signal, - calculating (S3) a descriptor representing said multimedia element by making the difference between said first set of coefficients and said second set of coefficients and - calculating (S4) associated power of said difference. Application to the classification and retrieval of multimedia items.



(19) INDIA


(54) Title of the invention : "SPIRO COMPOUNDS AS PERFUMING INGREDIENTS"



:NA :NA


:NA :NA


:NA :NA


1)FIRMENICH SA Address of Applicant :1, ROUTE DES JEUNES, P.O. BOX 239, 1211 GENEVA 8, SWITZERLAND. Switzerland (72)Name of Inventor :

1)CHRISTIAN VIAL 2)ROBERT MORETTI 3)ALAIN CHARPILLOZ 4)PETER FANKHAUSER 5)PIERO FANTINI

(57) Abstract : The present invention relates to the perfumery industry. It concerns more particularly a compound of formula (I) wherein the index m represents 0 or 1, R represents a hydrogen atom, or a methyl or acetyl group, R1, R2 and R4 represent a hydrogen atom or a methyl group, R3 represents a hydrogen atom, or a methyl or ethyl group, and two, three or four of all the R1 , R2 , R3 and R4 representing simultaneously a group containing at least a carbon atom, and the wavy and dotted lines represent a double bond, in which case n represents 0; or the wavy line represents a single bond, in which case the index n represents 1, and the dotted line represents a single or double bond; in the form of any one of its optical isomers or diastereomers or of a mixture thereof. The invention also relates to the use of the invention compounds as perfuming ingredients, able to impart a woody and/or aromatic, as well as to the perfumed articles or perfuming compositions comprising as active ingredient a compound of formula (I).



(19) INDIA


(54) Title of the invention : "PREFABRICATED PANEL WITH PROTECTIVE FILM"

(51) International classification :B81C1/00; B81C1/00

(31) Priority Document No :06 05963 (32) Priority Date :30/06/2006(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)GAZ TRANSPORT ET TECHNIGAZ Address of Applicant :1 ROUTE DE VERSAILLES 78470 SAINT-REMY-LES-CHEVREUSE, FRANCE France (72)Name of Inventor :

1)JACQUES DHELLEMMES 2)NICOLAS LEFEBVRE 3)SOPHIE PREATO-PAVRET DE LA ROCHEFORDIERE 4)CHRISTOPHE HUON DE KERMADEC

(57) Abstract : Panel (1) comprising, in succession, a first rigid board forming the back of the panel, a first thermally insulating layer (3) borne by the said backboard, an impervious covering (4) covering the said first thermally insulating layer, a second thermally insulating layer (5) which partially covers the said impervious covering and a second rigid board (6) covering the said second thermally insulating layer, characterized in that it comprises a film (8) which covers at least part of the said impervious covering which is not covered by the said second thermally insulating layer, the said film comprising at least one protective portion (9) and at least one spew portion (11) adjacent to the said protective portion, the said protective portion and the said spew portion being able to be detached from the said impervious covering independently of one another.



(19) INDIA


(54) Title of the invention : "COSMETIC OR PHARMACEUTICAL COMPOSITION COMPRISING A POLYCONDENSATE, METHOD OF COSMETIC TREATMENT USING SAID COMPOSITION, SAID POLYCONDENSATE AND METHOD OF PREPARATION"

(51) International classification :A 61 K (31) Priority Document No :0652591 (32) Priority Date :22/06/2006(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)L'OREAL Address of Applicant :14 RUE ROYALE,75008 PARIS,FRANCE. France (72)Name of Inventor :

1)GERARD MALLE 2)JEAN MONDET 3)XAVIER BLIN 4)IVAN RODRIGUEZ 5)PASCAL GIUSTINIANI

(57) Abstract : The present application relates to a cosmetic or pharmaceutical composition, notably of lipstick, comprising a polycondensate that can be obtained by reaction: - of polyol containing 3 to 6 hydroxyl groups; - of non-aromatic, saturated or unsaturated monocarboxylic acid; - of aromatic monocarboxylic acid containing 7 to 11 carbon atoms; and - of polycarboxylic acid, saturated or unsaturated, even aromatic, linear, branched and/or cyclic, containing at least 2 carboxyl groups COOH; and/or a cyclic anhydride of such a polycarboxylic acid. The application also relates to a method of cosmetic treatment employing said composition, the polycondensate thus defined and a method of preparation of said polycondensate.



(19) INDIA


(54) Title of the invention : "A FAULTY PACKET REJECTION DEVICE"

(51) International classification :B65B 65/00


:NA :NA


:NA :NA


:NA :NA


1)RAJESH KHOSLA Address of Applicant :KHOSLA PRECISIONS, 644, SECTOR 16-D, CHANDIGARH -160 015, INDIA. Punjab India (72)Name of Inventor :

1)RAJESH KHOSLA

(57) Abstract : This invention relates to a faulty packet rejection device for packaging machine comprising a belt conveyor C for conveying the packets P from the packaging machine, characterized in that a bracket 1 adapted to be operated by pneumatic cylinder 3 secured with the frame of the machine, a lever 2 being secured with said bracket to act as a stopper in order to make the stock of pouches or to reject as faulty packet P, a spring 6 is provided between the upper arm 2A of said lever and said bracket to keep the lever always into the downward position, a photo sensor 8 being provided below the conveyor belt to sense the existence of the faulty packet and to convey signals to the pneumatic cylinder to lift the bracket as well as the lever to allow the passage of the faulty/jointed packet to go to the rejection chute of the machine.



(19) INDIA


(54) Title of the invention : A PROCESS FOR IN-SITU DEPOSITION OF SILVER ON ACTIVED CARBON

(51) International classification :B01D 46/10


:NA :NA


:NA :NA


:NA :NA


1)COUNCIL OF SCIENTIFIC AND INDUSTRIAL


1)KAMARAJU SEETHA RAMA RAO 2)BURRI DAVID RAJU 3)PALADUGU VENKATESWARA RAO 4)VASIREDDY SIVA KUMAR 5)AYTAM HARIPADMASRI 6)KONDAPURAM VIJAYA RAGHAVAN

(57) Abstract : A process for the preparation of silver deposited activated carbon catalyst using low voltage current by application of low voltage D.C. current in the range of 5-100 volts through silver wires or plates immersed in water containing purified active carbon under stirring for a period till the deposition of silver on active carbon in the range of 1 to 10%, evaporating water to dryness to get silver deposited activated carbon.



(19) INDIA


(54) Title of the invention : "AN IMPROVED REFRIGERANT STORAGE APPARATUS"

(51) International classification :F25B 13/00

(31) Priority Document No :09/736,702 (32) Priority Date :15/12/2000(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)CARRIER CORPORATION Address of Applicant :CARRIER PARKWAY, P.O.BOX 4800, SYRACUSE, NEW YORK 13221, U.S.A. U.S.A. (72)Name of Inventor :

1)SHEEHAN DARREN STANLEY

(57) Abstract : In a two-stage absorption heating and cooling system with refrigerant storage apparatus for converting from a cooling to a heating mode of operation, provision is made to position the refrigerant storage tank in a location vertically above the condenser, and the tank is filled with refrigerant without the use of a pump. This is accomplished by fluidly interconnecting the high-temperature generator directly with the refrigerant storage tank such that after the refrigerant vapor from a high temperature generator is condensed in the low' temperature generator, the pressure difference between the high temperature generator and the refrigerant storage tank causes the refrigerant condensate to flow to the refrigerant storage tank. A valve is provided to selectively drain the refrigerant from the storage tank to an evaporator sump when changing from a cooling to a heating mode of operation.



(19) INDIA


(54) Title of the invention : "AN IMPROVED VACCINE FOR PROTECTION OF POULTRY AGAINST SALMONELLOSIS"



:NA :NA


:NA :NA


:NA :NA


1)G.B. PANT UNIVERSITY OF AGRICULTURE &

ECHNOLOGY Address of Applicant :PANTNAGAR, DISTT. UDHAM SINGH NAGAR-263145, UTARANCHAL, INDIA. Uttaranchal India (72)Name of Inventor :

1)DR. SHARMA, VISHWASHWAR DUTT 2)DR. CHAUHAN SUNIL

(57) Abstract : This invention relates to an improved vaccine by treating cell-extract that obtained from the strain no BM-1643 (Pantnagar) of Salmonella ser Weltevreden with formalin and adding saponin to get the desired vaccine.



(19) INDIA


(54) Title of the invention : "ENERGY-EFFICIENT PROCESS FOR PARAXYLENE PRODUCTION"

(51) International classification :C07C5/27; B01J29/44


:NA :NA


:NA :NA


:NA :NA


1)UOP LLC Address of Applicant :25 EAST ALGONQUIN ROAD, P.O.BOX 5017, DES PLAINES, ILLINOIS 60017-5017, USA. U.S.A. (72)Name of Inventor :

1)BRESLER, LEO 2)LARSON, ROBERT BANGT

(57) Abstract : This invention is drawn to a process for producing and recovering one or more high-purity xylene isomers from a feed stream having a substantial content of C9 and heavier hydrocarbons. The feed stream is processed to de-ethylate heavy aromatics, fractionated and passed to a circuit comprising C3-aromatic isomer recovery and isomerization to recover the high-purity xylene isomer with lowered energy costs.



(19) INDIA


(54) Title of the invention : "METHOD AND APPARATUS FOR DRIVING AN AMOLED WITH VARIABLE DRIVING VOLTAGE"

(51) International classification :H01L51/50; G09G3/00




:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46, QUAI A.LE GALLO,92100 BOULOGNE-BILLANCOURT, FRANCE. France (72)Name of Inventor :

1)SEBASTIEN WEITBRUCH 2)CARLOS CORREA 3)CEDRIC THEBAULT

(57) Abstract : The sharpness impression when displaying a movement on an AMOLED (Active Matrix Organic Light Emitting Display) shall be improved. For this purpose, an apparatus for driving a cell of an AMOLED is provided including driving means (14, 16) for applying a driving voltage to the cell and for applying a luminance control signal to the cell during a pre given time frame. The apparatus further includes controlling means (17, 18) for varying the driving voltage within the time frame according to a predefined function of time. For example, the driving voltage may be varied in the form of a triangle so that the lighting time over the frame is reduced while a CRT like behavior is emulated.



(19) INDIA


(54) Title of the invention : "METHODS AND SYSTEMS FOR ASSEMBLING A TURBINE"

(51) International classification :F23R3/60; F02C3/14


:NA :NA


:NA :NA


:NA :NA



1)BURDGICK STEVEN SEBASTIAN

(57) Abstract : A method for assembling a turbine (10) is provided, wherein the method includes positioning an annular nozzle carrier (210) radially inwardly from a casing (24) such that a cavity (300) is defined between the nozzle carrier and the casing. The method also includes extending a flange (352) from at least one of a leading edge (350) of the annular casing and a leading edge (362) of the nozzle carrier, and extending a seal ring (358) between the nozzle carrier and the casing such that the seal ring seals the cavity, wherein the seal ring is positioned between the flange and at least one of the nozzle carrier and the casing.



(19) INDIA


(54) Title of the invention : "PRESSURIZED GAS SUPPLY AND CONTROL SYSTEM FOR ACTUATION OF ACTIVE SEALS IN TURBOMACHINERY"

(51) International classification :F01D (31) Priority Document No :11/471,609 (32) Priority Date :21/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA



1)AWTAR, SHORYA 2)BIELAWA, DAVID STEPHEN 3)BURNETT, MARK EDWARD 4)BAILY, FREDERICK GEORGE 5)TURNQUIST, NORMAN ARNOLD 6)VARANASI KIRPA KIRAN

(57) Abstract : A gas supply and pressure control system delivers controlled pressurized gas according to an electrical command. The system includes a gas supply sub-system outputting a continuous high-pressure gas supply. A pressure control sub-system is provided in fluid communication with the gas supply sub-system and receives the continuous high-pressure gas supply. The pressure control sub-system provides a modulated pressure to a downstream volume, such as actuators for active seals in a turbomachinery environment, based on the electrical command.



(19) INDIA


(54) Title of the invention : "METHOD FOR PROCESSING HIGH HEMICELLULOSE PULP IN VISCOSE MANUFACTURE"

(51) International classification :D21C3/02; D21C3/00


:NA :NA


:NA :NA


:NA :NA


1)WEYERHAEUSER COMPANY Address of Applicant :POST OFFICE BOX 9777 FEDERAL WAY, WASHINGTON 98063-9777, USA U.S.A. (72)Name of Inventor :

1)MENGKUI LUO 2)JOHN A.WESTLAND

(57) Abstract : Pulp with a high hemicellulose level is blended with a dissolving grade pulp and converted to viscose. Blending can be performed during steeping or after steeping. Spinning of the viscose containing the blend, into filaments yields fibers with strength properties that are at least equal to those of the dissolving pulp alone.



(19) INDIA


(54) Title of the invention : "L "BUTT GAP SEAL BETWEEN SEGMENTS IN SEAL ASSEMBLIES"

(51) International classification :F16L21/02; F16L21/04

(31) Priority Document No :11/472,047 (32) Priority Date :21/06/2006 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA



1)DIANTONIO GREGORY L

(57) Abstract : Disclosed herein is a seal assembly (16) for a rotary machine having a plurality of arcuate segments (22) and at least one seal. The plurality of arcuate segments (22) are arrayed in an annulus and have butt joints, each of the arcuate segments (22) has a radially outermost surface (48) and a downstream face (58). The at least one seal is arranged to minimize leakage through the butt joints. The at least one seal has a first portion (44) configured to minimize leakage at the radially outermost surface (48) and a second portion (42) configured to minimize leakage at the downstream face (58).



(19) INDIA


(54) Title of the invention : "METHODS AND APPARATUS TO FACILITATE SEALING IN A TURBINE"

(51) International classification :F01D5/28; F01D11/08


:NA :NA


:NA :NA


:NA :NA


1)GENERAL ELECTRIC COMPANY Address of Applicant :ONE RIVER ROAD, SCHENECTADY, NEW YORK 12345, USA. U.S.A. (72)Name of Inventor :

1)LAURER KURT NEAL 2)BARB KEVIN JOSEPH 3)COUTURE BERNARD ARTHUS 4)MORTZHEIM JASON PAUL

(57) Abstract : A seal assembly (100) is for a turbine engine (10) is provided. The seal assembly (100) includes a seal ring (102) including an arcuate inner ring portion (114), an arcuate outer ring portion (120), and a neck portion (128) extending therebetween. The assembly has at least one recess formed within at least one of the seal ring outer ring portion and the seal ring neck portion. A biasing mechanism (208) extends chordially across the seal ring and is retained within said at least one recess.



(19) INDIA


(54) Title of the invention : "ALTITUDE COMPENSATION FOR TURBOCHARGER WASTEGATE"

(51) International classification :F02B37/18 (31) Priority Document No :200610126392.1 (32) Priority Date :30/06/2006 (33) Name of priority country :China (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)CATERPILLAR INC., Address of Applicant :100 N.E.ADAMS STREET, CITY OF PEORIA, STATE OF ILLINOIS 61629-6490, USA. U.S.A. (72)Name of Inventor :

1)DUTART CHARLES HOWARD

(57) Abstract : A wastegate valve for a turbocharger system in an engine of a work machine, vehicle or the like particularly suitable for operation at changing altitudes. The wastegate valve includes a valve housing including a valve diaphragm, a valve rod connected to the valve diaphragm, a spring operatively connected to exert a spring force against the valve rod, and a spring seat on the valve diaphragm. The spring has an installed spring length. The valve housing is movable to vary the installed spring length of the spring in response to changes in the ambient pressure.



(19) INDIA


(54) Title of the invention : "MECHANISM FOR CONVEYING AN ARTICLE"

(51) International classification :G07F9/00; G07F9/02


:NA :NA


:NA :NA


:NA :NA


1)EMHART GLASS S.A. Address of Applicant :HINTERBERGSTRASSE 22, CH-6330 CHAM, SWITZERLAND Switzerland (72)Name of Inventor :

1)JONATHAN S.SIMON 2)WILLIAM P. JACOBSEN

(57) Abstract : A pusher mechanism for pushing bottles formed in an I. S. machine from a dead plate to a conveyor. The pusher mechanism includes a pusher finger assembly which is supported by a housing and is movable about an axis of support and about the parallel axis of rotation of the housing. A pair of servo motors effect the desired rotation of the two axes through cam profiles each of which has at least one Bezier curve segment with a parameter of one curve linked to a parameter of the other curve.



(19) INDIA


(54) Title of the invention : "A SPORTS LIGHTING FIXTURE "

(51) International classification :H05B 33/10 (31) Priority Document No :08/079,663 (32) Priority Date :18/06/1993 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:521/DEL/94 :29/04/1994



1)BALDWIN SAMUEL LEON 2)FREYTAG WILLIAM DAVID 3)OSTEEN MITCHELL MONROE

(57) Abstract : This invention relates to a sports lighting Juminetre having low glare lighting characteristics. More specifically, this invention relates to such a sports lighting luminaire as exhibits improved photometric performance so as to achieve a more efficient and uniform light delivery configuration to a large area such as a playing surface of a sports field or arena.


(12) PATENT APPLICATION PUBLICATION (21) Application No.1096/DELNP/2003 A

(19) INDIA


(54) Title of the invention : APPARATUS FOR DETERMINING MODULATION SCHEME FOR RETRANSMISSION IN A COMMUNICATION SYSTEM"

(51) International classification :H04L 1/16 (31) Priority Document No :72485/2001 (32) Priority Date :20/11/2001

(33) Name of priority country :Republic of Korea


:PCT/KR02/02170 :20/11/2002

(87) International Publication No :WO 03/045001 (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA


1)SAMSUNG ELECTRONICS CO., LTD. Address of Applicant :416, MAETAN-DONG, PALDAL-GU, SUWON-CITY, KYUNGKI-DO, REPUBLIC OF KOREA. Republic of Korea (72)Name of Inventor :

1)SANG-HYUCK HA 2)MIN-GOO KIM

(57) Abstract : A method and apparatus for determining an optimum modulation scheme for a retransmission in a communication system supporting HARQ. When two modulation schemes are available, Information is modulated in the lower-order modulation scheme if a first MPR is less than a first threshold, and in the higher-ordeulation scheme if the first MPR is greater than or equal to the first threshold. Here, an MPR is determined by an EP size, the number of Walsh codes, and the number of slots per sub-packet A second MPR is calculated using an EP size, the number of Walsh codes, and the number of slots per. sub-packet. If the first MPR is equal to or less than a second threshold greater than the first threshold, the lower-order modulation scheme is selected. If the second MPR is greater than the second threshold, the higher-order modulation scheme is selected.



(19) INDIA


(54) Title of the invention : "OPTICAL PICKUP AND OPTICAL RECORDING OR REPRODUCING APPARATUS"

(51) International classification :G11B7/135 (31) Priority Document No :06116477.8 (32) Priority Date :30/06/2006



:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46 QUAI A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE France (72)Name of Inventor :

1)GUENTER TABOR 2)ROLF DUPPER 3)TSUNEO SUZUKI 4)MICHAEL BAMMERT

(57) Abstract : An optical pickup and optical recording or reproducing apparatus incorporating such an optical pickup is recommended, which comprises an adjustment means to adjust the actuator plate of the optical pickup, which holds the objective lens, by moving the actuator plate AP on a straight reference surface arranged in the slide base of the optical pickup to a position as defined by alignment equipment to compensate tolerances between traverse mechanism and disc motor. The adjustment means is a screw for moving the actuator plate on the straight reference surface inside the slide base against a counter spring and the alignment equipment is formed by the optical pickup, which irradiates a light beam to an optical disc inserted into the optical recording or reproducing apparatus and receives a return light from the disc as well as means for moving the optical pickup radially of the spinning optical disc. The proposed arrangement allows less tight tolerances of single members and requires only little outlay, because the optical pickup requires a small number of single Qmembers to assemble an optical pickup for reading of information from and/or recording of information to a disc.



(19) INDIA


(54) Title of the invention : "OPTICAL SYSTEM FOR A PROJECTOR, AND CORRESPONDING PROJECTOR"

(51) International classification :H04N5/225; H04N5/232


:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING, Address of Applicant :46, QUAI A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE. France (72)Name of Inventor :

1)JULIEN THOLLOT 2)KHALED SARAYEDDINE 3)PASCAL BENOIT

(57) Abstract : The invention relates to an optical system (3) for a projector, comprising: - at least a first polarizing beam splitter (321) for splitting a source illumination beam into a first illumination beam linearly polarized along a first direction (326) and a second illumination beam polarized perpendicular to the first direction (327); - at least one colour wheel (307) intersecting the polarized illumination beams in two different regions and producing a first colour beam linearly polarized along the first direction and a perpendicularly polarized second colour beam; and - two imagers (309) illuminated by the first and second polarized colour beams respectively.



(19) INDIA


(54) Title of the invention : "ISOLATION OF RNA AND DNA FROM A BIOLOGICAL SAMPLE"

(51) International classification :C12Q1/68; C07H21/02


:NA :NA


:NA :NA


:NA :NA


1)MILLIPORE CORPORATION Address of Applicant :290 CONCORD ROAD, BILLERICA, MASSACHUSETTS 01821, USA. U.S.A. (72)Name of Inventor :

1)KATHLEEN ONGENA 2)RICKY FRANCIS BAGGIO

(57) Abstract : The invention relates to methods of isolating nucleic acids from a sample using a filter device comprising a plurality of membranes. The invention also provides for devices comprising a plurality of membranes and kits suitable for isolating nucleic acids from a sample.



(19) INDIA


(54) Title of the invention : "COMMUNICATION METHOD IN A HOME-AUTOMATION INSTALLATION"

(51) International classification :G08C19/02; G08C19/02

(31) Priority Document No :06 05705 (32) Priority Date :26/06/2006 (33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SOMFY SAS Address of Applicant :50 AVENUE, DU NOUVEAU MONDE, 74300 CLUSES FRANCE. France (72)Name of Inventor :

1)PELLARIN FLORENT 2)AUGUSTIN BARBARA

(57) Abstract : The communication method applies to a home-automation installation comprising at least one sending element, a self-powered receiving element and an element for substituting for the receiving element. The method is such that, when the receiving element is in a sleep mode, the substitution element receives and records information sent by the sending element for the attention of the receiving element and such that, when the receiving element is no longer in sleep mode, the substitution element sends the information for the attention of the receiving element.



(19) INDIA


(54) Title of the invention : "SINGLE-SIDED, MULTILAYERED OPTICAL DISC, BCA RECORDING APPARATUS"

(51) International classification :G11B7/0045

(31) Priority Document No :2006-171425

(32) Priority Date :21/06/2006 (33) Name of priority country :Japan (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)KABUSHIKI KAISHA TOSHIBA Address of Applicant :1-1 SHIBAURA 1-CHIME, MINATO-KU TOKYO,105-8001,JAPAN. Japan (72)Name of Inventor :

1)YUSU KEIICHIRO, 2)NAKAMURA NAOMASA 3)YOSHIDA NOBUHISA 4)TAKAZAWA KOJI 5)MORITA SEIJI 6)ANDO HIDEO

(57) Abstract : In a single-sided, multilayered optical disc which performs recording and playback when irradiated with a laser beam having a predetermined wavelength, and has at least two recording layers that are independent of each other with respect to the light incident surface, a reflecting layer farthest from the light incident surface contains an Ag alloy, and has a light absorbance of 20% (inclusive) to 50% (inclusive) to a laser beam and/or a thermal conductivity of 50 (inclusive) to 250 (inclusive) W/m-K.



(19) INDIA


(54) Title of the invention : A METHOD AND APPARATUS USING AUXILIARY LEAF SPRING TO STABILIZE VEHICLE CHASSIS

(51) International classification :B60G11/02 (31) Priority Document No :200610094682.2 (32) Priority Date :26/06/2006 (33) Name of priority country :China (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)THOMAS J.NEAVITT Address of Applicant :3120 VENTURE DRIVE, LAS VEGAS, NEVADA, 89101 USA. U.S.A. (72)Name of Inventor :

1)PETER E.BRYANT

(57) Abstract : This invention relates to a method by using auxiliary leaf spring to stabilize the vehicle chassis. The features of it are as follows, the auxiliary leaf spring is located above the vehicle suspension spring on the two ends of vehicle rear axle. The vehicle suspension spring and auxiliary leaf spring hold the vehicle rear axle in between. Set adjustable shackle assembly at the two ends of the auxiliary leaf spring to connect the auxiliary leaf spring with the vehicle suspension spring. Between the center of the auxiliary leaf spring and vehicle rear axle there is a rubber block which make the shackle of the auxiliary leaf spring to be loaded in tension at all times. The advantages of this invention are as follows, The structure is compact and it"s easy to adjust. The holding force of the auxiliary leaf spring and vehicle suspension spring stabilizes the vehicle chassis and controls the total amount of roll. And increase the rear axle braking efficiency when these auxiliary springs are used because they stop the rear end of the vehicle from pitching up or getting light due to the increase in braking moments to the front wheels.



(19) INDIA


(54) Title of the invention : "APPARATUS, AND ASSOCIATED METHOD, FOR SUPPORTING SMS MESSAGING BY WAY OF AN IP NETWORK"

(51) International classification :H04Q (31) Priority Document No :06253272.6 (32) Priority Date :23/06/2006



:NA :NA


:NA :NA


:NA :NA


1)RESEARCH IN MOTION LIMITED Address of Applicant :295 PHILLIP STREET, WATERLOO, ONTARIO N2L 3W8, CANADA. Canada (72)Name of Inventor :

1)ALFANO NICHOLAS 2)ALLEN ANDREW

(57) Abstract : I Apparatus, and an associated method, for communicating short message service content to a short message service center. The address of an IP-SM-GW (Internet Protocol-Short Message-Gateway) defined in the 3GPP TS 23.204 is provided to user equipment and used to address an SIP request that contains encapsulated SMS content. The address is stored at the mobile station at a storage element, such as at a SIM card, UICC, or management object. A SIP request generator accesses the storage element and uses the address as the address of the SIP request. The SIP request also includes SMS content, in encapsulation, therein.



(19) INDIA


(54) Title of the invention : "PROCESS FOR THE CONTINUOUS PREPARATION OF ISOCYANATES"

(51) International classification :C07C263/10; C07C263/00


:NA :NA


:NA :NA


:NA :NA


1)BAYER MATERIALSCIENCE AG Address of Applicant :51368 LEVERKUSEN, GERMANY. Germany (72)Name of Inventor :

1)FRITZ POHL 2)RICARDO SERRA 3)MATTHIAS EHLERS 4)JEFFREY S.BOLTON 5)GARY B.SOLAK 6)KIRK J.BOURGEOIS 7)GREGORY L.MCCULLOUGH 8)AMBER R.HICKS 9)RICHARD G HILLMAN 10)JAMES E.SAGER 11)XIAOYAN WANG 12)SPOTSWOOD MILLER 13)RALF OCHEL 14)SARA DELUCIA

(57) Abstract : Isocyanates are produced by reacting an organic amine with phosgene in process which includes at least three stages. The first stage is carried out in a dynamic mixer. The second stage is carried out in at least one reactor. The third stage is carried out in at least one material separating apparatus. The pressure in the reactor of the second stage must be greater than or equal to the pressure in the dynamic mixer. The pressure in the third stage material separating apparatus must be lower than the pressure in the second stage reactor.



(19) INDIA


(54) Title of the invention : "METHOD FOR FORMING CASTING MOLDS"

(51) International classification :C25D1/10; B22C9/00;


:NA :NA


:NA :NA


:NA :NA


1)GENERAL ELECTRIC COMPANY, Address of Applicant :ONE RIVER ROAD,SCHENECTADY, NEW YORK,12345,USA. U.S.A. (72)Name of Inventor :

1)BUNKER RONALD SCOTT. 2)HARDWICKE CANAN USLU,

(57) Abstract : Disclosed herein are methods for forming casting molds (8, 10). In one embodiment, a method for forming a mold (8, 10) comprises casting a mold (8, 10) having a cavity surface (24), forming surface features on the cavity surface (24), wherein the surface features comprise a mixture (26), and heat treating the mixture (26). In another embodiment an article is disclosed.



(19) INDIA


(54) Title of the invention : TOP AND BOTTOM CLAMPING FOR A SURGICAL CASSETTE

(51) International classification :A61B17/06; B21G1/08


:NA :NA


:NA :NA


:NA :NA


1)ALCON,INC. Address of Applicant :P.O.BOX 62,BOSCH 69, CH-6331 HUNENBERG, SWITZERLAND. Switzerland (72)Name of Inventor :

1)HOPKINS, MARK ALAN 2)WILLIAMS, DAVID LLOYD 3)KING, NICOLEI R.

(57) Abstract : Embodiments of the present invention provide top and bottom clamping of a surgical cassette. One embodiment of the present invention includes a surgical cassette adapted for use in a surgical system having a first side (e.g., an inner side) and second side (e.g., an outer side). The surgical cassette, according to one embodiment, comprises a body portion configured to interface on its first side with a surgical console during use, a first clamping portion projecting from the top of the body portion configured to contact a first clamp rail on the cassette"s second side during use and a second clamping portion projecting from the bottom of the body portion configured to contact a second clamp rail on the cassette"s second side during use.



(19) INDIA


(54) Title of the invention : "SYSTEMS AND METHODS FOR DETECTING UNDESIRABLE OPERATION OF A TURBINE"

(51) International classification :B01D35/147; B01D37/04


:NA :NA


:NA :NA


:NA :NA


1)GENERAL ELECTRIC COMPANY Address of Applicant :ONE RIVER ROAD, SCHENECTADY, NEW YORK 12345,USA. U.S.A. (72)Name of Inventor :

1)TISENCHEK NICHOLAS A. 2)DEWHURST EDWARD ARTHUR

(57) Abstract : Systems and methods of detecting and correcting the undesirable operation of a turbine (105, 110) by monitoring one or more sensor devices (130, 160, 165), where each sensor device (130, 160, 165) monitors one or more operating parameter values associated with various turbine components. If any of the sensor devices (130, 160, 165) detects that a particular operating parameter associated with one or more turbine components is operating in a range of unacceptable risk, then corrective action is taken which may include opening and or closing one or more of the steam values (150, 155) associated with an inlet pipe (170, 175) until that particular operating parameter of the turbine (105, 110) is no longer operating in a range of unacceptable risk.



(19) INDIA


(54) Title of the invention : "INFORMATION RECORDING MEDIUM AND DISC APPARATUS"

(51) International classification :G61K1/00


(32) Priority Date :30/06/2006(33) Name of priority country :Japan (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)KABUSHIKI KAISHA TOSHIBA Address of Applicant :1-1 SHIBAURA 1-CHOME, MINATO-KU, TOKYO, 105-8001, JAPAN. Japan (72)Name of Inventor :

1)TAKAZAWA KOJI 2)MORITA SEIJI 3)UMEZAWA KAZUYO 4)MORISHITA NAOKI 5)OOTERA YASUAKI 6)ANDO HIDEO 7)NAKAMURA NAOMASA

(57) Abstract : An information recording medium has a first substrate, first recording layer, second recording layer, and second substrate. The first recording layer has a first dye layer and first reflecting layer from the light incidence side. The second recording layer has a second dye layer and second reflecting layer from the light incidence side. The thickness of the second dye layer is larger than that of the first dye layer.



(19) INDIA


(54) Title of the invention : "METHOD FOR PROCESSING HIGH HEMICELLULOSE PULP IN VISCOSE MANUFACTURE AND PRODUCTS THEREFROM"

(51) International classification :D21C3/02; D21C3/00


:NA :NA


:NA :NA


:NA :NA


1)WEYERHAEUSER COMPANY Address of Applicant :POST OFFICE BOX 9777 FEDERAL WAY, WASHINGTON 98063-9777, USA U.S.A. (72)Name of Inventor :

1)MENGKUI LUO 2)JOHN A.WESTLAND

(57) Abstract : The present invention relates to Pulp with a high hemicellulose level is blended with a dissolving grade pulp and converted to viscose. Blending can be performed during steeping or after steeping. Spinning of the viscose containing the blend, into filaments yields fibers with strength properties that are at least equal to those of the dissolving pulp alone.



(19) INDIA


(54) Title of the invention : "DIALDEHYDE CONDENSATES CONTAINING ACID GROUPS"

(51) International classification :C07C45/00

(31) Priority Document No :10 2006 029 408.4

(32) Priority Date :23/06/2006 (33) Name of priority country :Germany (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)LANXESS DEUTSCHLAND GMBH Address of Applicant :D-51369 LEVERKUSEN, GERMANY. Germany (72)Name of Inventor :

1)NILS BRINKMANN 2)MARTIN KLEBAN 3)KARL-HEINZ LAMMICH

(57) Abstract : Condensates containing acid groups and based on a) aldehydes, the aldehyde being selected from the group consisting of the dialdehydes of groups C2 to C12, and b) at least one compound carrying NH2 groups, acid group being understood as meaning sulpho and/or carboxyl groups and salts thereof.



(19) INDIA


(54) Title of the invention : THE METHOD AND STRUCTURE OF PREVENTING WATER FROM LEAKAGE FOR THE PRESSURIZED PUMP OF DIAPHRAGM TYPE

(51) International classification :F01B19/00 (31) Priority Document No :095122820 (32) Priority Date :23/06/2006

(33) Name of priority country :Chinese Taipei


:NA :NA


:NA :NA


:NA :NA


1)CHAO-FOU, HSU Address of Applicant :9F1., NO.16, LANE 417, HUANGSHING RD., SANMIN CHIU, KAOHSIUNG 807, TAIWAN. Taiwan 2)NA 3)YING-LIN, CAI (72)Name of Inventor :

1)CHAO-FOU, HSU

(57) Abstract : The present invention is to provide a method and structure of preventing water from leakage for the pressurized pump of diaphragm type with steps orderly comprises: corresponding to the threaded hole on each wobble plate, a hollow cylinder is first contrived on the top surface of each piston acting region of the diaphragm sheet; after sleeving the ladder hole of the piston head pushing chunk on the diaphragm sheet onto the peripheral of said hollow cylinder, drive the fixing screw via the center hole of said hollow cylinder into the threaded hole on each wobble plate of the pressurized pump of diaphragm type; and in the beginning of driving said fixing screw, the upper portion of said hollow cylinder will expand first; after thoroughly and tightly driving said fixing screw into the threaded hole on each wobble plate, the upper portion of said hollow cylinder will expanding deform and fill up the space between the bottom surface of the head of said fixing screw and the top surface of said ladder hole of said piston head pushing chunk; Thus, the function of said hollow cylinder becomes a blocking contrivance in preventing the water from leaking and seeping into the motor and avoiding the damage of pressurized pump of diaphragm type due to electric short circuit of the motor.



(19) INDIA


(54) Title of the invention : "COMPRESSOR CRANKSHAFT, PARTICULARLY REFRIGERANT COMPRESSOR CRANKSHAFT, AND METHOD FOR GRINDING SUCH A CRANKSHAFT"

(51) International classification :F04B1/04


(32) Priority Date :01/07/2006(33) Name of priority country :Germany (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)DANFOSS COMPRESSORS GMBH Address of Applicant :MADS-CLAUSEN-STR.7, P.O.BOX 1443, D-24904 FLENSBURG, GERMANY Germany (72)Name of Inventor :

1)IVERSEN, FRANK HOLM 2)LASSEN, HEINZ OTTO 3)NOMMENSEN, MARTEN 4)HANDKE, EKKEHARD

(57) Abstract : The invention concerns a , particularly a refrigerant compressor crankshaft (1) and a method for manufacturing such a crankshaft, with a shaft element (2), a crank pin (9) located eccentrically to the shaft element and a transition element (7) between the shaft element (2) and the crank pin (9). The purpose of the invention is to keep the manufacturing costs low. For this purpose, it is ensured that along its circumference the transition element (7) has at least one first reference point (20) and one second reference point (21a, 21b), with which the transition element (7) can be positioned in a holding fixture (25) of a working machine.



(19) INDIA


(54) Title of the invention : "DISPOSABLE BLADDER FOR INTRAUTERINE USE"

(51) International classification :A61F 7/00


:NA :NA


:NA :NA


:NA :NA


1)GYNELAB PRODUCTS, INC. Address of Applicant :36 NASHUA WAY, OCALE, FLORIDA 34482, UNITED STATES OF AMERICA, U.S.A. (72)Name of Inventor :

1)VAJOD SAADAT 2)LEE R. BOLDUC

(57) Abstract : A device for effecting necrosis of all of the tissue lining a human uterus, which device comprises an introducer comprising a catheter for insertion into the human uterus, said catheter defining in part a liquid flow passageway and having a rigid, closed distal end portion; a disposable balloon sub apparatus having a distendable balloon defining an enclosure in communication with said passageway and terminating in a rigid sleeve sealingly held on said rigid, closed distal end portion, said balloon projecting axially beyond the distal end of the catheter when distended, and being distendable to contact all of the tissue lining the human uterus; a source of liquid in fluid communication with said passageway for distending said balloon with a liquid; and a heater for heating said liquid wherein said rigid sleeve is sealingly held on said rigid, closed distal end portion by a seal lock as herein described between said rigid sleeve and said catheter, the seal lock comprising a first connector portion on said rigid sleeve and a second connector portion on said catheter.



(19) INDIA


(54) Title of the invention : "METHOD OF COMMUNICATION ADAPTED TO THE TRANSMISSION OF DATA PACKETS"

(51) International classification :H04L12/56; H04L29/06


:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46, QUAI A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE France (72)Name of Inventor :

1)PATRICK FONTAINE 2)RENAUD DORE 3)LUDOVIC JEANNE

(57) Abstract : The invention relates to a method of communication adapted to the transmission of data packets that can be transmitted according to various physical modes. In order to optimize transmission, the method comprises the following steps: - reception of packets (32), each packet being sent in at least one radio burst associated with a physical mode chosen from a set of at least two physical modes; - estimation of the packet error rate (33) for each physical mode of the set.



(19) INDIA


(54) Title of the invention : "METHOD OF RECEIVING AUDIO/VIDEO SERVICES, CORRESPONDING TERMINAL AND SYSTEM"

(51) International classification :H04N7/52; H04N7/52

(31) Priority Document No :0652753 (32) Priority Date :30/06/2006(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46, QUAI A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE. France (72)Name of Inventor :

1)WILLEM LUBBERS 2)ERIC GAUTIER 3)REMI HOUDAILLE

(57) Abstract : The invention relates to a method of receiving audio/video services comprising a step of transmitting a name resolution request according to an audio/video services entry point discovery protocol. In order to allow access to varied services, the method comprises: steps (75, 77) of receiving first and second addresses corresponding to, respectively, a first (210) and a second (203) entry point used for distributing service signalling, the addresses being provided by, respectively first (212) and second (203) name servers associated with distinct networks a step of storing the first and second entry point addresses.



(19) INDIA


(54) Title of the invention : "COAXIAL FULL-FLOW AND BYPASS OIL FILTER APPARATUS AND METHOD"

(51) International classification :B01D29/58; B01D27/14; B01D35/14


:NA :NA


:NA :NA


:NA :NA


1)SPX CORPORATION Address of Applicant :13515 BALLANTYNE CORPORATE PLACE, CHARLOTTE, NC 28277, USA U.S.A. (72)Name of Inventor :

1)LEROY J. MEDDOCK 2)MARK T. MEDDOCK 3)KENNETH SWANSON

(57) Abstract : A fluid filter includes a first filter, a second filter coaxial with the first filter, an inlet adjacent the first and second filters, a first outlet adjacent the inlet, and a second outlet at a distal end from the inlet and the first outlet Further, the first and second filters may be housed in a unitary canister or a canister that has a canister body coupled to a removable canister cap. A method of filtering fluid includes providing a cylindrical housing, inserting a first tubular filter into the housing, insetting a second tubular filter into the housing, coaxial with the first tubular filter, providing an inlet on the housing, and providing a first outlet and a second outlet on the housing wherein the second outlet is at a distal end from the first outlet



(19) INDIA


(54) Title of the invention : "COAXIAL FULL-FLOW AND BYPASS OIL FILTER APPARATUS AND METHOD"

(51) International classification :B01D29/58; B01D27/14; B01D35/14


:NA :NA


:NA :NA


:NA :NA


1)SPX CORPORATION Address of Applicant :13515 BALLANTYNE CORPORATE PLACE, CHARLOTTE, NC 28277, USA. U.S.A. (72)Name of Inventor :

1)LEROY J.MEDDOCK 2)MARK T.MEDDOCK 3)KENNETH SWANSON

(57) Abstract : A fluid filter includes a first filter, a second filter coaxial with the first filter, an inlet adjacent the first and second filters, a first outlet adjacent the inlet, and a second outlet at a distal end from the inlet and the first outlet Further, the first and second filters may be housed in a unitary canister or a canister that has a canister body coupled to a removable canister cap. A method of filtering fluid includes providing a cylindrical housing, inserting a first tubular filter into the housing, inserting a second tubular filter into the housing, coaxial with the first tubular filter, providing an inlet on the housing, and providing a first outlet and a second outlet on the housing wherein the second outlet is at a distal end from the first outlet



(19) INDIA


(54) Title of the invention : ASSIGNING RULES TO DATA UNITS

(51) International classification :CO7D 401/12


:NA :NA


:NA :NA


:NA :NA


1)INTEL CORPORATION Address of Applicant :2200 MISSION COLLEGE BOULEVARD, SANT CLARA, CA 95052, UNITED STATES OF AMERICA U.S.A. (72)Name of Inventor :

1)UDAYA SHANKARA 2)PAUL MANOJ

(57) Abstract : A network device may determine a rule that may be applied to a data unit using bitmap based rule matching. The network device may generate the bitmap based on the flow identifiers layout and a set of overlapping rules that form a connected region. The network device may assign a highest priority rule to the data unit if a cell representing the flow identifiers of the data unit is completely covered by a highest priority rule. The network device may assign a rule based on the meta-data if the cell is partially covered by the highest priority rule or the connected region.



(19) INDIA


(54) Title of the invention : "DEVICE AND METHOD FOR SCANNING DATA STORED ON A RECORDING MEDIUM"

(51) International classification :G02F1/133; G09G3/20




:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING, Address of Applicant :46, QUAI A. LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE, France (72)Name of Inventor :

1)LOUIS CHEVALLIER 2)ARNAUD MORIGAULT 3)LIONEL OISEL

(57) Abstract : The invention concerns a method and a device for scanning data (5) stored on a recording medium (6). The device comprises a reading head (4) and further comprises: - means (2) to calculate an error rate of the data read by said reading head (4),said data being arranged as groups of data, - means (1, 3) to align the reading head (4) in respect with the next data (5) to be read according to said error rate of the data read (5), the reading head (4) reads at least twice some of said groups, changing position in respect with the group of data (5) from one reading to the other, - means (1) to compare the calculated error rate corresponding to each position of the said reading head (4), - means (3) to align the reading head (4) with the relative position in respect with the groups of data giving the lowest error rate in order to read the following groups of data (5), and the means (3) to align the reading head (4) adjust the frequency of the groups of data (5) read at least twice.



(19) INDIA


(54) Title of the invention : "A FEMALE TERMINAL FITTING"

(51) International classification :H01R13/11

(31) Priority Document No :JP2006-171504


:NA :NA


:NA :NA


:NA :NA


1)SUMITOMO WIRING SYSTEMS, LTD. Address of Applicant :1-14,NISHISUEHIRO-CHO, YOKKAICHI-CITY, MIE 510 8503, JAPAN Japan (72)Name of Inventor :

1)TOMOYOSHI FUKAYA 2)TSUTOMU TANAKA

(57) Abstract : An object of the present invention is to improve the contact reliability of a male tab and a female terminal fitting. A female terminal fitting 10 is provided with a tubular portion 12 into which a male tab 80 is insertable through a tab insertion opening 12A formed at the front end, and a plate-shaped contact piece 30 arranged inside the tubular portion 12 and adapted to sandwich the male tab 80 together with receiving pads 17 provided in the tubular portion 12. The contact piece 30 includes a resiliency deformable contact main body 31 that is curved in thickness direction in such a manner as to come closer to the receiving pads 17 and can resiliently come into contact with a widthwise middle part of the plate surface of the male tab 80 at a contact position of the convex surface of this curve, and shake preventing portions 32 formed along an inserting direction of the male tab 80 at the opposite sides of the contact main body 31 and adapted to prevent the male tab 80 from shaking about the center of axis thereof by coming into contact with the opposite widthwise ends of the plate surface of the male tab 80.



(19) INDIA


(54) Title of the invention : "PICTURE SIGNAL DETECTING APPARATUS"

(51) International classification :H04B1/66



:NA :NA


:NA :NA


:NA :NA


1)SANYO ELECTRIC CO.,LTD. Address of Applicant :5-5, KEIHAN-HONDORI, 2-CHOME, MORIGUCHI-SHI, OSAKA, JAPAN. Japan (72)Name of Inventor :

1)TANAKA, TSUTOMU 2)NIKI MUTSUKI

(57) Abstract : In a VI.F circuit for synchronously detecting a picture signal from an AM-modulated PIF signal, the accuracy of a picture signal r.o be demodulated is maintained even in a state of overmodulation. A comparator (68) determines whether the picture signal exceeds VTH, which is a state of overmodulation. In a period in which the signal is less than or equal to VTH, a switch circuit (56) inputs an output voltage of an APC filter (54) to a VCO (48), and a PLL is formed. The PLL operates so as to lock onto the PIF signal, and reproduces a carrier wave. On the other hand, in a period in which the signal exceeds VTH, the switch circuit (56) inputs an output voltage VSH of an SH circuit (58) to the VCO (48). The SH circuit (58) holds the voltage of the APC filter (54) that is in a locked state in a horizontal synchronizing period and uses the voltage to control the VCO (48), whereby free run and frequency drifting are minimized.



(19) INDIA


(54) Title of the invention : "WRITE ONCE INFORMATION RECORDING MEDIUM AND DISK APPARATUS"

(51) International classification :G11B21/08



:NA :NA


:NA :NA


:NA :NA


1)KABUSHIKI KAISHA TOSHIBA Address of Applicant :1-1 SHIBAURA 1-CHOME,MINATO-KU, TOKYO, 105-8001, JAPAN. Japan (72)Name of Inventor :

1)MORITA SEIJI 2)TAKAZAWA KOJI 3)UMEZAWA KAZUYO 4)MORISHITA NAOKI 5)NAKAMURA NAOMASA

(57) Abstract : A first recording film, interlayer, and second recording film are formed on a transparent resin substrate having a groove and land. A recording mark is formed by irradiation with a short-wavelength laser beam. The light reflectance of the recording mark formed by irradiation with the short-wavelength laser beam is higher than a light reflectance before irradiation with the short-wavelength laser beam. The first recording film has a first read-only recording mark recorded by a three-dimensional pit. The second recording film has a second read-only recording mark recorded by a three-dimensional pit. The reflectances of the pits of the first and second recording layers are 4.2% to 8.4%, or the pit width of the second recording film is larger than that of the first recording layer.



(19) INDIA


(54) Title of the invention : "FOAMED AND SOLID POLYURETHANE ELASTOMERS BASED ON A HIGH MELTING POLYISOCYANATE AND PROCESSES FOR THEIR PRODUCTION AND THEIR USE"

(51) International classification :C08G18/00

(31) Priority Document No :10 2006 030 3911

(32) Priority Date :01/07/2006 (33) Name of priority country :Germany (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)BAYER MATERIALSCIENCE AG Address of Applicant :51368 LEVERKUSEN,GERMANY Germany 2)GETZNER WERKSTOFFE GmbH (72)Name of Inventor :

1)HARTMUT NEFZGER 2)JAMES MICHAFL BARNES 3)MARTIN DIETRICH 4)DIRK WEHOWSKY

(57) Abstract : High-quality polyurethane (PU) elastomers which exhibit virtually constant rigidity values across a broad temperature range and which are used as vibration isolation elements are produced from a prepolymer produced from a high-melting polyisocyanate and a polyol component satisfying specific compositional requirements.



(19) INDIA


(54) Title of the invention : "A PROCESS FOR PREPARING GRAFT COPOLYMER USED FOR ABSORBING HEAVY METAL"



:NA :NA


:NA :NA


:NA :NA


1)SRIVASTAVA ARTI Address of Applicant :D/O SRI R.C. SRIVASTAVA 2/57 M.I.G. AVAS VIKAS COLONY, JHUNSI, YOJANA NO. 3 ALLAHABAD-221506 U.P. INDIA. Uttar Pradesh India 2)KUMAR RAJESH 3)BEHARI KUNJ (72)Name of Inventor :

1)SRIVASTAVA ARTI 2)KUMAR RAJESH 3)BEHARI KUNJ

(57) Abstract : The nature of invention is related to the process for preparation of graft copolymer used for heavy metal ion uptake. The graft copolymer was synthesized by the grafting of N,N' dimethylacrylamide as monomer onto Na salt of carboxymethylcellulose by applying the potassium peroxymonosulphate and thiourea redox pair through the free radical graft copolymerization process in aqueous medium under inert atmosphere at constant temperature .The product obtained is amphoteric in nature and was applied for the uptake of metals like Cu2+, Pb2+, Ni2+, Zn2+ and Hg2+ and many more metals could be studied in future . Thus it provides the great opportunity of metal ion absorption from the wastage water which is being discharged from chemical industries, steel industries and food industries etc.



(19) INDIA


(54) Title of the invention : SUPERCHARGED INTERNAL-COMBUSTION ENGINE WITH AN EXPANDER UNIT IN A HEAT-RECOVERY CIRCUIT

(51) International classification :F02G1/053 (31) Priority Document No :102006028868.8 (32) Priority Date :23/06/2006 (33) Name of priority country :Germany (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)MAN NUTZFAHRZEUGE AKTIENGESELLSCHAFT Address of Applicant :DACHAUER STRASSE 665, 80995 MUNCHEN, GERMANY. Germany (72)Name of Inventor :

1)MOLLER, HERIBERT 2)RAAB, GOTTFRIED

(57) Abstract : A supercharged internal-combustion engine of a motor vehicle is described, which has a cooling circuit in which a working medium is circulated which is converted at least in part into a physical state in the form of steam or gas, at least one expander unit being provided which is operatively connected to an output shaft of the internal-combustion engine (1) by way of a drive train and in which an output shaft of the expander unit is movable by a conversion of energy contained in the working medium at least in part in the form of steam or gas. The basic concept of the technical solution described is that the expander unit is constructed in the form of a two-stroke piston engine (2) which is operatively connected to the output shaft of the internal-combustion engine indirectly or directly by way of the drive train.



(19) INDIA


(54) Title of the invention : "COSMETIC OR PHARMACEUTICAL COMPOSITION COMPRISING A POLYCONDENSATE, METHOD OF COSMETIC TREATMENT USING SAID COMPOSITION, SAID POLYCONDENSATE AND METHOD AND PREPARATION"

(51) International classification :A61K8/00 (31) Priority Document No :0652591 (32) Priority Date :22/06/2006(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)L'OREAL Address of Applicant :14 RUE ROYALE, 75008 PARIS, FRANCE. France (72)Name of Inventor :

1)GERARD MALLE 2)JEAN MONDET 3)IVAN RODRIGUEZ 4)PASCAL GIUSTINIANI

(57) Abstract : The present application relates to a cosmetic or pharmaceutical composition, notably of lipstick, Comprising a polycondensate that can be obtained by reaction: - of polyol containing 3 to 6 hydroxyl groups; - of non-aromatic, saturated or unsaturated monocarboxylic acid; - of aromatic monocarboxylic acid containing 7 to 11 carbon atoms; and - of polycarboxylic acid, saturated or unsaturated, or even aromatic, linear, branched and/or cyclic, containing at least 2 carboxyl groups COOH; and/or a cyclic anhydride of such a polycarboxylic acid. The application also relates to a method of cosmetic treatment employing said composition, the polycondensate thus defined and a method of preparation of said polycondensate.



(19) INDIA



(51) International classification :G61K



:NA :NA


:NA :NA


:NA :NA


1)KABUSHIKI KAISHA TOSHIBA Address of Applicant :1-1 SHIBAURA 1-CHOME, MINATO-KU, TOKYO, 105-8001, JAPAN. Japan (72)Name of Inventor :

1)YAMAMOTO RYOSUKE 2)MATSUMARU MASAAKI 3)UMEZAWA KAZUYO 4)TAKAZAWA KOJI 5)MORITA SEIJI 6)NAKAMURA NAOMASA 7)ANDO HIDEO

(57) Abstract : According to one embodiment, an information recording medium has two or more recording layers, the track pitch falls within the range from 250 to 500 nm, and the half maximum full-width of the groove of the substrate falls within the range from 47.5% to 72.5%.



(19) INDIA


(54) Title of the invention : "ASSEMBLY FOR LIFTING AND LOWERING A FARM TRACTOR-TOWED IMPLEMENT"

(51) International classification :B62D59/00 (31) Priority Document No :B02006A000475 (32) Priority Date :20/06/2006 (33) Name of priority country :Italy (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)CNH ITALIA S.P.A. Address of Applicant :"VIALE DELLE NAZIONI, 55, 41100 MODENA, ITALY Italy (72)Name of Inventor :

1)PERTUSI FRANCO 2)SGHEDONI LORENZO

(57) Abstract : A lifting/lowering assembly (1) for lifting/lowering an implement connected to a farm tractor is disclosed. The 5 assembly (1) includes, among other things, a hand-operated mechanical device (5) having: - a metal ring (25) having a contoured through hole (25b); - a metal disk (55) inserted, in use, inside the contoured through hole (25b); the metal disk (55) having a diametrical through hole (56) housing two balls (SF1, SF2) between which a spring (ML) is interposed; and a control transmission device (26) being integral with the metal disk (55); and is -a knob (60) also integral with the metal disk (55), and which, in use, is moved to achieve the desired manual control.



(19) INDIA


(54) Title of the invention : "HOLOGRAPHIC STORAGE SYSTEM BASED ON COMMON PATH INTERFEROMETRY"

(51) International classification :G11B7/00 (31) Priority Document No :06116126.1 (32) Priority Date :27/06/2006



:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46 QUAI A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE. France (72)Name of Inventor :

1)GABOR SZARVAS 2)SZABOLCS KAUTNY 3)LASZLO DOMJAN 4)SVENJA-MAREI KALISCH

(57) Abstract : The present invention relates to a holographic storage system (20), and more specifically to a holographic storage system (20) using a phase spatial light modulator (6). According to the invention a holographic storage system (20) with a phase SLM (6) for imprinting a 2-dimensional phase data pattern onto an object beam (7) includes a common path interferometer (31, 32, 40) for converting the phase data pattern of the object beam (7) into an intensity data pattern.



(19) INDIA


(54) Title of the invention : "DEVICE AND METHOD USING NON-CYCLE ACCURATE MEASUREMENTS FOR DISCOVERING EMULATED CLIENTS"




:NA :NA


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46, QUAI A.LE GALLO, 92100 BOULOGNE-BILLANCOURT, FRANCE. France (72)Name of Inventor :

1)OLIVIER HEEN 2)ERIC DIEHL 3)ALAIN DURAND 4)MOHAMED KARROUMI 5)NICOLAS PRIGENT

(57) Abstract : A method for discovering emulated clients. A verifier (20) sends (206) a cryptographic challenge C to a client (10) and starts (208) a timer (22). The client (10) uses (210) a deterministic key search algorithm to find the correct key and returns (212) the result as a number of tries needed. The verifier (20) then stops (214) the timer (22) and verifies (216) that the result is correct and (218) that the response was timely. Also provided is a verifier (20).



(19) INDIA


(54) Title of the invention : "ENCODING APPARATUS AND METHOD IN A COMMUNICATION SYSTEM"

(51) International classification :H03M 13/23 (31) Priority Document No :2001/75625 (32) Priority Date :01/12/2001



:PCT/KR02/02260 :30/11/2002


:NA :NA


:NA :NA



1)DONG-HEE KIM 2)HO-KYU CHOI 3)YOUN SUN KIM 4)HWAN-JOON KWON

(57) Abstract : An apparatus for encoding an information bit sequence and generating coded symbols in a communication system which transmits packet data and the information bit sequence for controlling transmission of the packet data. An encoder encodes the information bit sequence at a preset coding rate and outputs coded symbols. A controller controls the encoder so that the encoder outputs the coded symbols when a frame length of the information bit sequence is a first length, and the encoder outputs partial symbols among the coded symbols when the frame length of the information bit sequence is a second length, the second length being shorter than the first length.



(19) INDIA


(54) Title of the invention : "FILTER DEVICE FOR THE ISOLATION OF A NUCLEIC ACID"

(51) International classification :B03C (31) Priority Document No :60/817,504 (32) Priority Date :29/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)MILLIPORE CORPORATION Address of Applicant :290 CONCORD ROAD, BILLERICA, MASSACHUSETTS 01821, USA. U.S.A. (72)Name of Inventor :

1)RICKY FRANCIS BAGGIO 2)GEORGE A.GAGNE JR. 3)MANJULA AYSOLA 4)JULIE R.MURRELL

(57) Abstract : The invention relates to methods of isolating nucleic acids from a sample using a filter device comprising a plurality of membranes. The invention also provides for devices comprising a plurality of membranes and kits suitable for isolating nucleic acids from a sample. The invention also provides for nucleic acids which bind to at least a portion of a microorganism genome and methods of using the same.



(19) INDIA


(54) Title of the invention : "TWO-FACTOR CONTENT PROTECTION"

(51) International classification :H04L9/32 (31) Priority Document No :06115927.3 (32) Priority Date :22/06/2006



:NA :NA


:NA :NA


:NA :NA


1)RESEARCH IN MOTION LIMITED Address of Applicant :295 PHILLIP STREET, WATERLOO, ONTARIO N2L 3W8, CANADA Canada (72)Name of Inventor :

1)BROWN MICHAEL K. 2)ADAMS NEIL 3)BROWN MICHAEL S.

(57) Abstract : A system for providing two-factor content protection includes a first device (404) that is enabled with content protection, and a second device (401) that is used to authenticate users of the first device. The first device (404) uses the public key (KPUBLIC) of a public/private key pair belonging to the second device (401) to encrypt its content protection key.



(19) INDIA


(54) Title of the invention : SYSTEM AND METHOD FOR THE MODIFICATION OF SURGICAL PROCEDURES USING A GRAPHICAL DRAG AND DROP INTERFACE

(51) International classification :A61F9/00, G06F3/033


:NA :NA


:NA :NA


:NA :NA


1)ALCON, INC. Address of Applicant :P.O.BOX 62, BOSCH 69, CH-6331 HUENBERG, SWITZERLAND. Switzerland (72)Name of Inventor :

1)ESSEX, PAUL J. 2)EKVALL, JOHAN 3)TODD,KIRK W.

(57) Abstract : Embodiments of the present invention provide a system and method for allowing a user to modify a surgical procedure. An embodiment of the method of the present invention can include: providing a GUI on a touch screen of a surgical console, said GUI comprising a representation of the surgical procedure and representations of one or more surgical steps,wherein the GUI allows a user to modify the representation of the surgical procedure by dragging and dropping representations of surgical steps using the touch screen; detecting that the representation of the surgical procedure has been modified; and modifying the surgical procedure to correspond to the modified representation of the surgical procedure.



(19) INDIA


(54) Title of the invention : "METHOD FOR TRACKING AN ELECTRONIC DEVICE IN A COMMUNICATION NETWORK "



:NA :NA


:NA :NA


:NA :NA


1)MOTOROLA, INC. Address of Applicant :1303 E. ALGONQUIN ROAD, SCHAUMBURG, IL 60196, U.S.A. U.S.A. (72)Name of Inventor :

1)VINOD KUMAR RAMACHANDRAN 2)SURESH KALYANASUNDARAM

(57) Abstract : A method for tracking an electronic device in a communication network is disclosed. The method includes sending (204) a tracking-area update message in a first technology to the communication network when the electronic device enters a first tracking area. When the electronic device is in an idle mode and within the coverage of the first technology and a second technology, it continues accessing (206) the communication network through the first technology. The method also includes sending (208) the tracking-area update message to the communication network when the electronic device loses the coverage of the first technology and traverses the second technology or when the electronic device crosses -the boundary of the first tracking area.



(19) INDIA


(54) Title of the invention : "EARPHONES"

(51) International classification :H04R25/00 (31) Priority Document No :11/428,057 (32) Priority Date :30/06/2006 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)BOSE CORPORATION Address of Applicant :THE MOUNTAIN, FRAMINGHAM, MASSACHUSETTS 01701-9168, U.S.A. U.S.A. (72)Name of Inventor :

1)ROMAN SAPIEJEWSKI 2)WILLIAM W. TICE 3)JASON M. HARLOW 4)IAN M. COLLIER 5)KEVIN P. ANNUNZIATO 6)PERICLES NICHOLAS BAKALOS 7)MICHAEL J. MONAHAN

(57) Abstract : An earphone includes a first acoustic chamber including a reactive element and a resistive element in parallel, a second acoustic chamber separated from the first acoustic chamber by an acoustic transducer, and a housing to support the apparatus from the concha of a wearer"s ear and to extend the second acoustic chamber into the ear canal of the wearer"s ear. A cushion includes a first material and a second material and is formed into a first region and a second region. The first region defines an exterior surface shaped to fit the concha of a human ear. The second region defines an exterior surface shaped to fit the ear canal of a human ear. The first and second regions together define an interior surface shaped to accommodate an earphone. The first material occupies a volume adjacent to the interior surface. The second material occupies a volume between the first material and the first and second outer surfaces. The first and second materials are of different hardnesses.



(19) INDIA


(54) Title of the invention : "A CONNECTOR"

(51) International classification :F16L37/098

(31) Priority Document No :JP2006-180931


:NA :NA


:NA :NA


:NA :NA


1)SUMITOMO WIRING SYSTEMS, LTD. Address of Applicant :1-14 NISHISUEHIRO-CHO YOKKAICHI-CITY, MIE 510-8503, JAPAN Japan (72)Name of Inventor :

1)TOMOYOSHI FUKAYA 2)TSUTOMU TANAKA

(57) Abstract : An object of the present invention is to improve the connection reliability of a terminal fitting. A connector F is provided with a female housing 10 for accommodating a terminal fitting 30 connected with an end of a wire W, a sealing member 98 for sealing the inside of the female housing 10 by being mounted on the wire W and fitted into a mounting portion 15 as an opening portion formed in the rear surface of the female housing 10, and a rear holder 50 formed with a wire insertion hole 55, through which the wire W is inserted, and adapted to press the sealing member 98 to prevent the sealing member 98 from coming out by being mounted on the female housing 10 from behind. In the sealing member 98, a seal main body 96 to be held in close contact with the outer circumferential surface of the wire W and the inner circumferential surface of the mounting portion 15 and a shake preventing portion 94 to be held in close contact with the outer circumferential surface of the wire W and the inner circumferential surface of the wire insertion hole 55 of the rear holder 50 are arranged one after the other in forward and backward directions.



(19) INDIA


(54) Title of the invention : "CUTTING ELEMENT HAVING ENHANCED CUTTING GEOMETRY"

(51) International classification :E21B10/08 (31) Priority Document No :11/475,448 (32) Priority Date :27/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SMITH INTERNATIONAL,INC. Address of Applicant :16740 HARDY STREET, HOUSTON, TEXAS 77032,USA U.S.A. (72)Name of Inventor :

1)LANCE T. RICHMAN

(57) Abstract : [0043] A drill bit that includes a bit body, at least one roller cone attached to the bit body and able to rotate with respect to the bit body, and a plurality of cutting elements disposed on the at least one roller cone is disclosed. At least one of the plurality of cutting elements includes a first area defining a trailing edge, a second area proximate the first area defining a main wear surface, and a third area proximate the second area and defining a leading edge relief zone. Further, an insert for a drill bit that includes a contact portion adapted to contact an earth formation, the contact portion including a first area defining a relieved trailing edge, a second area defining a main wear surface, and a third area proximate the second area and defining a leading edge relief zone. Further, including an insert for a drill bit wherein a surface of the second area is a curved surface having a radius of curvature substantially equal to a radius of a borehole is also disclosed.



(19) INDIA



(51) International classification :G07F13/00



:NA :NA


:NA :NA


:NA :NA


1)KABUSHIKI KAISHA TOSHIBA Address of Applicant :1-1 SHIBAURA 1-CHOME, MINATO-KU, TOKYO, 105-8001, JAPAN Japan (72)Name of Inventor :

1)YAMAMOTO RYOSUKE 2)MATSUMARU MASAAKI 3)UMEZAWA KAZUYO 4)TAKAZAWA KOJI 5)MORITA SEIJI 6)NAKAMURA NAOMASA 7)ANDO HIDEO

(57) Abstract : According to one embodiment, an information recording medium has two or more recording layers, the track pitch falls within the range from 250 to 500 nm, and the half maximum full-width of the groove of the substrate falls within the range from 47.5% to 72.5%.



(19) INDIA


(54) Title of the invention : ENERGY EFFICIENT BENGAL GRAM SATTU MAKING TECHNOLOGY

(51) International classification :A23L 1/30


:NA :NA

(87) International Publication No :N.A. (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA


1)Central Institute of Post Harvest Engineering &

Technology, Address of Applicant :Central Institute of Post Harvest Engineering & Technology, P.O. Pau Campus, Ludhiana-141004, Punjab. Punjab India (72)Name of Inventor :

1)DR. MRIDULA DEVI 2)DR. ONKAR DOMAJI WANJARI 3)ER. MASUVADI RAMARATHINAM MANIKANTAN 4)DR. RAJ KUMAR GOYAL

(57) Abstract : Bengal gram sattu is a protein rich food, good for children, adult and elderly and for diabetics too. The process, which has been evolved, is energy efficient, maximize the recovery of final product, and produce good quality sattu. This technique maintains uniform particle size and colour as well as aroma and texture of the product. The sattu was safe for consumption stored at room temperature in LDPE bag for 6 months with good acceptability. This process could reduce the energy consumption in de-hulling and grinding.



(19) INDIA


(54) Title of the invention : "METHOD AND SYSTEM FOR MANAGING A LOCATION AREA IN A WIRELESS COMMUNICATION NETWORK"

(51) International classification :H04B 1/00


:NA :NA


:NA :NA


:NA :NA


1)MOTOROLA INC. Address of Applicant :1303 E. ALGONQUIN ROAD, SCHAUMBURG, IL 60196, UNITED STATES OF AMERICA. U.S.A. (72)Name of Inventor :

1)SURESH KALYANSUNDARAM 2)RAJEEV AGRAWAL 3)VINOD KUMAR RAMACHANDRAN 4)VIJAY RAMAN

(57) Abstract : A method (200) and Base Transceiver Station (BTS) for managing a location area in a wireless communication network is disclosed. The wireless communication network includes a plurality of cells. The method includes receiving (204) a current location information of one or more wireless communication devices. Further, the method includes estimating (206) a probable direction of movement of the one or more wireless communication devices using the current location information and one or more of a previous location information and a mobility pattern information of the one or more wireless communication devices. Furthermore, the method includes forming (208) the location area based on the probable direction of movement of the one or more wireless communication devices.



(19) INDIA


(54) Title of the invention : "MULTI-USER MULTI-INPUT DESKTOP WORKSPACES AND APPLICATION"

(51) International classification :G06F 9/50


:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROSOFT WAY, REDMOND, WASHINGTON 98052, USA U.S.A. (72)Name of Inventor :

1)KENTARO TOYAMA 2)BHRIGHU SAREEN 3)BRADLEY L. CARPENTER 4)UDAI SINGH PAWAN

(57) Abstract : Multi-user multi-input desktop workspaces and applications are described. In one aspect, a single computing device presents multiple workspaces on a desktop area. The desktop area is designed for multiple users to provide in parallel inputs. Each workspace is configured for use by a particular set of users. Responsive to user direction, user access restrictions to a particular workspace of the multiple workspaces is suspended to allow a new user to interface within context of a particular workspace.



(19) INDIA



(51) International classification :G61K1/00



:NA :NA


:NA :NA


:NA :NA


1)KABUSHIKI KAISHA TOSHIBA Address of Applicant :1-1 SHIBAURA 1-CHOME, MINATO-KU, TOKYO, 105-8001, JAPAN Japan (72)Name of Inventor :

1)MATSUMARU MASAAKI 2)YAMAMOTO RYOSUKE 3)ANDO HIDEO 4)NAKAMURA NAOMASA 5)TAKAZAWA KOJI 6)UMEZAWA KAZUYO 7)MORITA SEIJI 8)OOMACHI NORITAKE

(57) Abstract : An information recording medium in which letting H1 (nm) be a groove depth of a first substrate on which a first recording layer is formed, H2 (nm) be a groove depth of a second substrate on which a second recording layer is formed, H11 (nm) be a thickness of a first dye layer at a land area, H12 (nm) be a thickness of the first dye layer at a groove bottom area, H21 (nm) be a thickness of a second dye layer at a land area, H22 (nm) be a thickness of the second dye layer at a groove bottom area, a be an absolute value of H11 - H12, and β be an absolute value of H11 - H12, the groove depth H1 of the first substrate and the groove depth H2 of the second substrate satisfy H11 - H12| = α, |H21 - H22| = ß, X/8n ≤H2 - a ≤ λ/8n, and X/8n≤H2 - ß≤ λ/3n.



(19) INDIA


(54) Title of the invention : A PROCESS FOR PRODUCTION OF KERNELS FROM NSFH-36 VARIETY OF SUNFLOWER SEEDS (HELIANTHUS ANNUS L) FOR CONFECTIONERY PURPOSE IN FOOD INDUSTRY

(51) International classification :A23N 5/08


:NA :NA

(87) International Publication No :N (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA


1)CENTRAL INSTITUTE OF POST HARVEST

ENGINEERING AND TECHNOLOGY Address of Applicant :CIPHET, PO PAU, LUDHIANA - 141004 (PUNJAB), INDIA. Punjab India (72)Name of Inventor :

1)DR. RAM KISHOR GUPTA 2)ER. RAJESH KUMAR VISHWAKARMA 3)ER. MUSUVADI RAMARATHINAM MANIKANTAN 4)DR. ONKAR DOMAJI WANJARI

(57) Abstract : Sunflower seeds are the gift of the beautiful sunflower, a plant with rays of petals emanating from its bright yellow, seed-studded center. Presence of fairly high proportion of hull in sunflower seed reduces oil recovery and yield meal of no use during mechanical expression of sunflower seed. While this meal is containing 36% protein and could be used for various protein enriched food products preparation at lower cost. Sunflower kernels have a mild nutty taste and firm, but tender texture. In the health conscious world of today, nutrition helps in selling new food products prepared from novel protein sources and sunflower is one such potential protein supplement for human diet, mainly due to its superior nutritional quality absence of anti-nutritional factor. If hull could be removed prior to extraction, good quality oil could be produced. Besides, meal could be utilized for edible purpose. Popularizing sunflower kernel in the diet can help combating protein-calorie malnutrition in the children to a certain extent. Roasted seeds such as peanuts, almonds, cashew nuts etc are few popular snack foods but are costly; hence a need exists to find out cheaper substitutes. When considered in aggregate, the amazing sunflower kernel adds a nutritional wallop to a wide array of products. Therefore, the present work is an attempt to develop a process with required equipment and machinery to produce sunflower kernels. The whole kernel could be used for the preparation sunflower kernel snack food and remaining brokens could be utilized for the preparation of various confectionery items such as sunflower caramel, sunflower-sesame confection (chikki), sunflower sweat meat, etc. Besides, if hull could be removed prior to extraction, refining cost would be lower and good quality oil could be produced at reduced processing cost. Extraction of oil using dehulled seed may also reduce the volume of solvent being used for extraction of oil. This may benefit oil industry to tune of million of rupees.



(19) INDIA


(54) Title of the invention : COMPOSITION FOR ORAL DELIVERY OF THERAPEUTIC AGENT AND PROCESSES THEREOF



:NA :NA


:NA :NA


:NA :NA


1)INDIAN INSTITUTE OF TECHNOLOGY (IIT), DELHI Address of Applicant :INDIAN INSTITUTE OF DELHI, HAUZ KHAS, NEW DELHI - 110016 Delhi India 2)INSTITUTE OF NUCLEAR MEDICINE AND APPLIED

SCIENCES (INMAS), DRDO, DELHI . (72)Name of Inventor :

1)SINGH, HARPAL 2)LAHIRI, S.S. 3)KUMAR, AMIT

(57) Abstract : The invention relates to hydrogel copolymer particles of P (MAA- Co-PEGDMA) or P (MAA- Co- PEGDA) or P (AA- Co- PEGDA) or P (AA- Co-PEGDMA) and method of their preparation by copolymerization of poly (ethylene glycol) dimethacrylate (PEGDMA) and poly (ethylene glycol) acrylate (PEGDA) of various molecular weights by methacrylic acid (MAA)/ acrylic acid (AA). The invention also relates to a pharmaceutical composition for oral delivery of therapeutic agent in mammals which comprises of loading the hydrogel copolymer particles with a desired therapeutic agent at basic pH. The therapeutic agent such as insulin which when loaded in the hydrogel polymer particles and administered to the mammals results in lowering of the blood glucose level over a sustained period.



(19) INDIA


(54) Title of the invention : "COSMETIC USE OF CONCAVE OR ANNULAR PARTICLES OF SILICONE MATERIAL AS AGENTS MAKING IT POSSIBLE TO INCREASE THE SUN PROTECTION FACTOR; AQUEOUS PHOTOPROTECTIVE COMPOSITION COMPRISING THEM"

(51) International classification :A61K9/70 (31) Priority Document No :0652593 (32) Priority Date :22/06/2006(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)L'OREAL Address of Applicant :FRENCH BODY CORPORATE OF 14 RUE ROYALE 75008 PARIS, FRANCE. France (72)Name of Inventor :

1)JEAN-THIERRY SIMONNET 2)FLORENCE L'ALLORET

(57) Abstract : The present invention relates to the use of concave or annular particles of silicone material, in particular in the form of portions of hollow spheres, in a composition comprising, in a physiologically acceptable medium, at least one aqueous phase and at least one organic UV screening agent and/or one inorganic UV screening agent for the purpose of increasing the sun protection factor (SPF). Another subject-matter of the present invention is the use of concave or annular particles of silicone material, in particular in the form of portions of hollow spheres, in combination with at least one wetting agent in a composition comprising, in a physiologically acceptable medium, at least one aqueous phase and at least one organic UV screening agent and/or one inorganic UV screening agent for the purpose of reducing the shine after application. The invention also relates to a composition comprising, in a physiologically acceptable medium: a) at least one aqueous phase; b) concave or annular particles of silicone material, in particular in the form of portions of hollow spheres; c) at least one wetting agent; d) at least one organic UV screening agent and/or one inorganic UV screening agent.



(19) INDIA


(54) Title of the invention : MAGNETIC GYRO-PROJECTILE DEVICE WITH ELECTRONIC COMBUSTION, TURBOGENERETION AND GYRO STABILIZATION

(51) International classification :F02D 6/00


:NA :NA

(87) International Publication No :N (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA


1)PAL, ANADISH KUMAR Address of Applicant :194, Vaishali, Pitampura Delhi-110088 Delhi India (72)Name of Inventor :

1)PAL, ANADISH KUMAR

(57) Abstract : A hollow cylinder has an electromagnet to hold back a canister and an induction heating linear actuator to combust the combustive material inside the canister to eject a locked piston from the cylinder. There is a turbogenerator cum motor around the cylinder, which respectively either converts die energy of the post-combustion gases into electricity to get stored and to power an integrated or separate annular stator assembly to give the ejected piston a rotatory motion for stability in projectile motion. A simple device has a helically arranged, multi-pole permanent magnet assembly annularly integrated around the cylinder to give the ejected piston a rotatory motion for stability in projectile motion. In other forms, an annular stator assembly around the cylinder is supplied with switched, externally generated electric power and there is either no turbogenerator or the turbogenerator cum motor to respectively produce electricity or to provide gyroscopic stability to the cylinder.



(19) INDIA


(54) Title of the invention : "A MULTIPLE LISTING SYSTEM"



:NA :NA


:NA :NA


:NA :NA


1)ON LINE REAL ESTATE PVT. LTD. Address of Applicant :SCO 58-59, SECOND FLOOR, SECTOR 34A, CHANIGARH(U.T.), INDIA Chandigarh India (72)Name of Inventor :

1)GURPREET DOOR 2)ISHWARI SINGH

(57) Abstract : This invention relates to a multiple listing system. This helps in exchange of information at different locations, in a specific way, about real estate from sellers to buyers through property agent. For exchange of information various tools are required, e.g., inter-net, wireless, telephone, cell phone, P.D.A., scanner, signature security & authorized user system.



(19) INDIA


(54) Title of the invention : IMPROVED ORAL PHARMACEUTICAL COMPOSITION OF A POORLY WATER-SOLUBLE ACTIVE AGENT

(51) International classification :C01F 17/00


:NA :NA


:NA :NA


:NA :NA


1)PANACEA BIOTEC LIMITED Address of Applicant :B-1 Extn./G-3, MOhan Co-op. Indl. Estate Mathura Road, N.Delhi. Delhi India (72)Name of Inventor :

1)JAIN RAJESH 2)JINDAL KOUR CHAND 3)SINGH AMARJIT 4)TALWAR MUNISH 5)GORISSEN HENRICUS R.M.

(57) Abstract : Provided in the present invention are improved oral pharmaceutical compositions comprising at least one poorly water soluble active agent, preferably endothelin conversion enzyme (ECE) inhibitor and/or neutral endopeptidase (NEP) inhibitor in an amount greater than 10% w/w of the composition, more preferably the active agent is SLV-306 or its pharmaceutically acceptable salts, esters, hydrates, solvates, isomers or derivatives thereof; a alkali system in an amount greater than 10% w/w of the composition preferably comprising a mixture of at least two alkaline compounds and optionally one or more pharmaceutically acceptable excipients. Also provided are process for preparation of such improved compositions and method of using such composition.



(19) INDIA


(54) Title of the invention : "PAIRING TO A WIRELESS PERIPHERAL DEVICE AT THE LOCK-SCREEN"

(51) International classification :H04L12/00 (31) Priority Document No :06116012.3 (32) Priority Date :23/06/2006



:NA :NA


:NA :NA


:NA :NA


1)RESEARCH IN MOTION LIMITED Address of Applicant :295 PHILLIP STREET, WATERLOO, ONTARIO N2L 3W8,CANADA Canada (72)Name of Inventor :

1)ADAMS NEIL 2)LITTLE HERBERT 3)SIBLEY RICHARD

(57) Abstract : A method is presented to allow pairing of a first wireless-enabled device (404) to a second wireless-enabled device (401) while the first device (404) is locked. A pairing interface is provided on the locked first device (404) to obtain pairing information about the second device (401). The pairing information is used to pair the first device (404) to the second device (401) and to establish wireless communications therebetween without first requiring that the first device (404) be unlocked.



(19) INDIA


(54) Title of the invention : SURGICAL LASER SYSTEM WITH REMOTE CONTROL FUNCTIONALITY

(51) International classification :A61B18/20, A61B1/00


:NA :NA


:NA :NA


:NA :NA


1)ALCON, INC. Address of Applicant :P.O.BOX 62, BOSCH 69, CH-6331 HUNENBERG, SWITZERLAND Switzerland (72)Name of Inventor :

1)HORVATH, CHRISTOPHER 2)ROMODA, LASZLO

(57) Abstract : Embodiments of the present invention provide a laser surgical system with a basic set of functionality which is remotely controllable to implement an advanced set of functionality. According to one embodiment of the present invention, a basic laser surgical system may be coupled to an advanced control unit such that the basic laser surgical system may be controllable by the advanced control unit to implement a broader set of functionality. By moving less frequently used functionality to an advanced unit, the basic unit may be streamlined with regards to both cost and size, and the learning curve required to utilize the basic unit may be reduced relative to a more feature-ladened unit, allowing the basic unit to be utilized in myriad situations or procedures where an "all-in-one" unit would be less than desirable.



(19) INDIA


(54) Title of the invention : MULTIFUNCTION SURGICAL PROBE

(51) International classification :MULTIFUNCTION SURGICAL PROBE


:NA :NA


:NA :NA


:NA :NA


1)ALCON, INC. Address of Applicant :P.O.BOX 62, BOSCH 69,CH-6331 HUNENBERG, SWITZERLAND. Switzerland (72)Name of Inventor :

1)DACQUAY, BRUNO 2)HORVATH, CHRISTOPHER 3)ROMODA, LASZLO 4)PASTRANA JR., ARMANDO

(57) Abstract : A multifunction surgical probe is disclosed, one embodiment comprising: a handpiece, operable to receive a light beam from a laser; and a firing switch operable to provide a firing control signal to cause the laser to fire and emit the light beam. The surgical prove can further comprise an interface communicatively coupled to the firing switch and operable to communicate the firing control signal to the laser. The laser can be operably coupled to a surgical console operable to control the laser, and the interface can be communicatively coupled to the firing switch and operable to communicatively couple the surgical probe to the surgical console and to communicate the firing control signal to the surgical console. The surgical console can be operable to control the laser based on the firing control signal. The surgical probe can also comprise an interlock switch operable to prevent the firing switch from firing the laser and a standby switch operable to produce a standby control signal to switch the laser between a stand-by and a ready state. The firing switch can be a progressively actuated switch operable to, at a first point in its range of motion, provide an initializing control signal operable to initialize the laser in preparation for firing and then, at a second point in its range of motion, provide the firing control signal to cause the laser to fire.



(19) INDIA


(54) Title of the invention : SYSTEM AND METHOD FOR FACILITATING SETUP OF SURGICAL INSTRUMENTATION AND CONSUMABLES ASSOCIATED THEREWITH

(51) International classification :A61B17/00 (31) Priority Document No :11/477,210 (32) Priority Date :29/06/2006 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)ALCON, INC. Address of Applicant :P.O.BOX 62, BOSCH 69, CH- 6331 HUNENBERG,SWITZERLAND. Switzerland (72)Name of Inventor :

1)EKVALL, JOHAN 2)TODD, KIRK W. 3)ESSEX, PAUL J. 4)GELLAND, TORSTEN A.

(57) Abstract : Embodiments of the present invention provide a system and method useful in setting up a complex ophthalmic surgical instrumentation and consumables associated therewith. One embodiment is directed to a surgical system capable of displaying a video showing setup instructions corresponding to a consumable or a consumable pack. Each pack may contain one or more consumables. Once a consumable is scanned, selected, or otherwise identified, the surgical system may operate to query a database to obtain Directions For Use (DFU) and other data associated with the consumable, update pack settings accordingly, and provide setup instructions in various modes, including the Wizard. The Wizard provides setup instructions (e.g.. visual, audio, text, etc.) one step at a time and displays the next step in a pre-defined setup sequence only when the preceding step has been correctly and successfully completed.



(19) INDIA


(54) Title of the invention : APPARATUS AND METHOD FOR AUTO-TITRATING A LASER

(51) International classification :H01S5/00 (31) Priority Document No :60/818,002 (32) Priority Date :30/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)ALCON, INC. Address of Applicant :P.O.BOX 62, BOSCH 69, CH-6331 HUNENBERG, SWITZERLAND. Switzerland (72)Name of Inventor :

1)HORVATH, CHIRISTOPHER

(57) Abstract : An apparatus and method for auto-titrating a surgical laser are disclosed. One embodiment of the method comprises: providing an algorithm, wherein the algorithm is operable to configure the laser based on one or more user inputs; providing a first user input operable to cause the algorithm to execute and fire the laser in a defined pattern; providing a second user input, in response to an observed condition, operable to cause the laser to stop firing and to cause the algorithm to determine one or more laser parameter values and configure the laser based on the one or more laser parameter values, wherein a final laser power value when the laser stops firing is an input to the algorithm and wherein the algorithm determines the one or more laser parameters based on the final laser power value. The method can further comprise placing the laser in a "ready" (surgical) mode, either automatically by the auto-titration algorithm or via another user input Once in a ready mode, a user, such as a surgeon, can perform a surgical procedure with the automatically configured laser. The user inputs can be provided by activating a control switch, such as the footswitch typically used by ophthalmic surgeons to control the operation of an ophthalmic surgical laser.



(19) INDIA


(54) Title of the invention : "PHARMACEUTICAL COMPOSITION CONTAINING FIXED DOSE COMBINATION OF ATENOLOL WITH ISOSORBIDE MONONITRATE"

(51) International classification :C07D 319/00


:NA :NA


:NA :NA


:NA :NA


1)RANBAXY LABORATORIES LIMITED Address of Applicant :12TH FLOOR, DEVIKA TOWER, 6, NEHRU PLACE, NEW DELHI - 110 019, INDIA. Delhi India (72)Name of Inventor :

1)RAJAN KUMAR VERMA 2)N BADRI VISWANATHAN 3)ASHOK RAMPAL

(57) Abstract : The present invention relates to a pharmaceutical composition containing fixed dose combination of atenolol with isosorbide mononitrate and process for the preparation thereof. The composition provides extended release of isosorbide mononitrate and immediate release of atenolol.



(19) INDIA


(54) Title of the invention : "A SHOE STRUCTURE"

(51) International classification :A43B13/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)EU-TOP CORPORATION Address of Applicant :2F-3, NO. 11, LANE 144, SEC.2, NAN YA S. ROAD, PAN CHIAO, TAIPEI HSIEN, TAIWAN, R.O.C. Taiwan (72)Name of Inventor :

1)CHEN, MING-JENG

(57) Abstract : The present invention provides an improved shoe structure to improve the sport efficiency and the wearing comfort of the user. The shoe structure comprises a base portion and a cover portion, wherein multiple flexible devices, such as springs, are formed within the base portion of the shoe structure to provide a load-bearing function. The shoe structure of the present invention is designed not only to provide comfort but also to bear a high load of weight such that the foot of the user can be protected by minimizing the impact force produced from the ground when the user steps or jumps on the ground. Multiple air gaps are formed within the shoe structure to circulate the air within the shoe structure so that the foot of the user can keep dry and active in a clear environment.



(19) INDIA


(54) Title of the invention : "MULTICURRENCY DISPLAY"

(51) International classification :GO6Q 50/00


:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROSOFT WAY, REDMOND, WASHINGTON 98052, UNITED STATES OF AMERICA U.S.A. (72)Name of Inventor :

1)BALAJI HARIHARAN

(57) Abstract : A computer-implemented method of providing information to a user is disclosed. The method includes providing a user interface that includes a data element containing a first numeric value. An input is received from the user and represents a selection of the data element. The input is responded to by displaying a second numeric value that is related to but different than the first numeric value. A determination is made as to when the selection of the data element has ended. Upon that determination, display of the second numeric value is terminated.



(19) INDIA


(54) Title of the invention : "BUSINESS SYSTEM INTERFACE"

(51) International classification :GO6F 7/00


:NA :NA

(87) International Publication No :NA. (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA



1)AMIT SUDAN, MANBHAWAN PRASAD,ROHIT

BHATIA 2)MANINDERJIT SINGH 3)MANBHAWAN PRASAD 4)ROHIT BHATIA 5)SANDEEP SADANANDAN 6)SANDEEP SADANANDAN

(57) Abstract : A business system interface for accessing data from a Line-of-Business (LOB) system from within an information worker productivity (IWP) application is provided. The business system interface includes an embedded business system user interface contained within a user interface of the IWP application. Also included, is a business data access component that can retrieve data from the LOB system and provide the retrieved data to the embedded business system user interface. The embedded business system user interface and the business data access component contain at least some managed code components.



(19) INDIA


(54) Title of the invention : "SUPPORT FOR RELIABLE END TO END MESSAGING OF TAGS IN AN RFID INFRASTRUCTURE"

(51) International classification :G08B 1/00


:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROFT WAY, REDMOND, WASHINGTON 98052-6399, U.S.A. U.S.A. (72)Name of Inventor :

1)RAMACHANDRAN VENKATESH 2)ABHISHEK AGARWAL 3)ANUSH KUMAR 4)BALASUBRAMANIAN SRIRAM 5)MOHAMED FAKRUDEEN ALI AHMED 6)JANAKI RAM GOTETI 7)JAYARAM KALYANA SUNDARAM 8)KALYAN CHAKRAVARTHY SONNATHI

(57) Abstract : The claimed subject matter provides a system and/or a method that facilitates ensuring reliable data within a radio frequency identification (RFID) infrastructure. A radio frequency identification (RFID) network can include at least one device that receives data from a tag. A distribute component can initiate a reliable transaction with the received data to ensure at least one subscribing RFID process utilizes such data.



(19) INDIA


(54) Title of the invention : "DEVICE SIMULATOR FRAMEWORK FOR AN RFID INFRASTRUCTURE"

(51) International classification :G06K 7/00


:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROSOFT WAY, REDMOND, WASHINGTON 98052, U.S.A. U.S.A. (72)Name of Inventor :

1)KOUSHIK DASGUPTA 2)BHOLA RAM MEENA

(57) Abstract : The claimed subject matter provides a system and/or a method that facilitates simulating one or more devices respective to disparate vendors, wherein the devices can be associated with an RFID infrastructure. A physical device can wirelessly receive data from a tag. A device simulator can employ a virtual replication of the physical device to simulate the physical device within an RFID network allowing the device to be virtually represented as if physically within the RFID network.



(19) INDIA


(54) Title of the invention : "SUPPORT FOR BATCHING OF EVENTS, AND SHREDDING OF BATCHED EVENTS IN THE RFID INFRASTRUCTURE PLATFORM "

(51) International classification :G0PB 1/00


:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROSOFT WAY, REDMOND, WASHINGTON 98052, U.S.A. U.S.A. (72)Name of Inventor :

1)ABHISHEK AGARWAL 2)ANUSH KUMAR 3)BALASUBRAMANIAN SRIRAM 4)MOHAMED FAKRUDEEN ALI AHMED 5)JANAKI RAM GOTETI 6)JAYARAM KALYANA SUNDARAM 7)KALYAN CHAKRAVARTHY SONNATHI 8)RAMACHANDRAN VENKATESH

(57) Abstract : The claimed subject matter provides a system and/or a method that facilitates receiving data from at least one device. A radio frequency identification (RFID) network can include at least one device that receives data from a tag. A batcher component can collect the data based on a start boundary and an end boundary and communicate the batched data to an RFID process.



(19) INDIA


(54) Title of the invention : "SYNCHRONOUS COMMAND EXECUTION MODEL FOR RFID-ENABLING APPLICATION"

(51) International classification :GO8B 1/00


:NA :NA


:NA :NA


:NA :NA



1)ABHISHEK AGARWAL 2)ANUSH KUMAR 3)BALASUBRAMANIAN SRIRAM 4)MOHAMED FAKRUDEEN ALI AHMED 5)JANAKI RAM GOTETI 6)JAYARAM KALYANA SUNDARAM 7)KALYAN CHAKRAVARTHY SONNATHI 8)RAMACHANDRAN VENKATESH

(57) Abstract : The claimed subject matter provides a system and/or a method that facilitates providing communication channels within a radio frequency identification (RFID) infrastructure. A radio frequency identification (RFID) network can include at least one device that can receive data from a tag. A mixed mode component can employ a synchronous command and an asynchronous event processing with the device.



(19) INDIA


(54) Title of the invention : RELIABILITY OF EXECUTION FOR DEVICE PROVIDER IMPLEMENTATIONS

(51) International classification :G06K7/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA



1)ABHISHEK AGARWAL 2)ANUSH KUMAR 3)BALASUBRAMANIAN SRIRAM 4)MOHAMED FAKRUDEEN ALI AHMED 5)JANAKI RAM GOTERI 6)JAYARAM KALYANA SUNDARAM 7)KALYAN CHAKRAVARTHY SONNATHI 8)RAMACHANDRAN VENKATESH

(57) Abstract : The claimed subject matter provides a system and/or a method that facilitates providing reliability associated with radio frequency identification (RFID) technology. An RFID network can include at least one device that wirelessly receives data from a tag. A provider component can have a dedicated execution space independent of an RFID server within a host allowing communication to at least one device within the RFID network.



(19) INDIA


(54) Title of the invention : HYBRID CELL VACCINE AGAINST KALA-AZAR



:NA :NA


:NA :NA


:NA :NA


1)COUNCIL OF SCIENTIFIC & INDUSTRIAL RESEARCH Address of Applicant :ANUSANDHAN BHAWAN, RAFI MARG, NEW DELHI - 110 001, INDIA. Delhi India (72)Name of Inventor :

1)SUNITI BHAUMIK 2)RAJATAVA BASU 3)KSHUDIRAM NASKAR

(57) Abstract : The present invention provides a hybrid cell vaccine against Leishmaniasis comprising of syngeneic macrophage with a dominant Leishmania antigen-KMP-11 electrofused with allogenic Dendritic Cell. Hybrid cell vaccination approach with dendritic cells has been widely used successfully in tumor models only. By devising a novel strategy of transfecting syngeneic macrophage cell line from BALB/c mice with a dominant Leishmania antigen-KMP-11 and electrofusing with allogenic DC from C57BL/6, the inventors obtained a complete clearance of splenic and hepatic parasite burden in late stage L. donovani infection in genetically susceptible BALB/c mice. Curative response resulted from a high KMP-11 specific MHC class I restricted CD8+CTL response. This is the first study that realized the potential of hybrid cell vaccine in the field of infectious disease and clearly shows the contribution of Th2 cytokine response in conferring protection to Leishmania donovani infection in experimental VL model.



(19) INDIA


(54) Title of the invention : EXTRA-CELLULAR MATRIX LOCALIZED FERRITIN 1 FOR IRON UPTAKE, STORAGE, AND STRESS TOLERANCE

(51) International classification :C12N 15/82


:NA :NA


:NA :NA


:NA :NA


1)CHAKRABORTY, NIRANJAN Address of Applicant :NATIONAL CENTRE FOR PLANT GENOME RESEARCH ARUNA ASAF ALI MARG, JNU CAMPUS NEW DELHI-110067 Delhi India (72)Name of Inventor :

1)CHAKRABORTY, NIRANJAN 2)CHAKRABORTY, SUBHRA 3)DATTA, ASIS 4)BHUSAN, DEEPTI

(57) Abstract : The present invention relates to environmental stress responsive protein ferritin (CaFerl) of chickpea. The invention discloses identification, isolation and cloning of ECM-localized ferritin (CaFerl) of chickpea and its multifunctional role in nutrient uptake, storage and stress tolerance. Comparative proteomic analysis of the chickpea extra-cellular (ECM) was performed to identify novel components of dehydration stress signaling. In addition, the present invention relates a method for producing environmental stress tolerant transgenic plants over-expressing the said CaFerl gene. The present invention further provides dehydration stress tolerant transgenic plants overexpressing dehydration-responsive extra cellular matrix (ECM) protein ferritin (CaFerl).



(19) INDIA


(54) Title of the invention : "NEW NAPHTHALENE COMPOUNDS, A PROCESS FOR THEIR PREPARATION AND PHARMACEUTICAL COMPOSITIONS CONTAINING THEM"

(51) International classification :C07D401/12 (31) Priority Document No :06.05916 (32) Priority Date :30/06/2006 (33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)LES LABORATOIRES SERVIER, Address of Applicant :12, PLACE DE LA DEFENSE, 92415 COURBEVOIE CEDEX, FRANCE, France (72)Name of Inventor :

1)SAID YOUS 2)BASILE PERES 3)AHMED SABAOUNI 4)PASCAL BERTHELOT 5)MICHAEL SPEDDING 6)PHILIPPE DELAGRANGE 7)DANIEL-HENRI CAIGNARD 8)MATTHIEU DESROSES 9)JEAN-ALBERT BOUTIN 10)VALERIE AUDINOT

(57) Abstract : Compounds of formula (I) wherein ♦ R1 represents a group R4 or NHR4, wherein R4 is as defined in the description; ♦ R2 represents a substituted linear or branched (C1-C6)alkyl group; ♦ R3 represents a hydrogen or halogen atom or a linear or branched (C1-C6)alkyl or linear or branched (C1-C6)alkenyl group. Medicaments.



(19) INDIA


(54) Title of the invention : "PROTECTIVE STRUCTURE OF DISC PACKAGING"

(51) International classification :B65 B47/04


:NA :NA


:NA :NA


:NA :NA


1)PRINCO CORP. Address of Applicant :NO. 6, CREATION 4TH ROAD, HSINCHU SCIENCE PARK, TAIWAN, R.O.C. Taiwan (72)Name of Inventor :

1)LEE-KUO-CHUNG

(57) Abstract : A "protective structure of disc packaging" of the invention is composed of an upper lid, a lower lid and a casing that are formed on the top and the bottom sides and the perimeters of a pile of discs, and a heat-shrinkable film covers the protective body and said discs together to retaining the disc quality during the disc packaging and delivery processes. The characteristic of the invention lies in: the upper lid and the lower lid are respectively composed of at least two interlaced disc-shaped plates, which possess wavy buffer portions that are made of corrugated paper or plastic corrugated sheet. When the upper and the lower disc-shaped plates are disposed, the undulating buffer portions of the disc-shaped plates are vertically stacked up, in addition, the sizes of the disc-shaped plates are larger than the sizes of the discs and the casing being shaped as a roll.



(19) INDIA


(54) Title of the invention : "A CONTINUOUS BLANCHING SYSTEM FOR PROCESSING OF VEGETABLES".



:NA :NA


:NA :NA


:NA :NA


1)DIRECTOR GENERAL, DEFENCE RESEARCH &

DEVELOPMENT ORGANISATION CC Address of Applicant :DIRECTORATE OF ER & IPR, IIIRD FLOOR, 'B'WING, ROOM NOS. 348 & 349, DRDO BHAWAN, RAJAJI MARG DHQ PO, NEW DELHI-110001 Delhi India (72)Name of Inventor :

1)ALAPPA RAMAKRISHNA 2)MADAIAH MADHU 3)JAVOORU HANUMANTHAPPA LAXMANA 4)MYSORE RAJU KUMARASWAMY 5)KUNIGAL SRINIVASIAH PREMAVALLI 6)AMARINDER SINGH BAWA

(57) Abstract : The continuous blanching system for vegetables has for example a capacity of 500 kgs per hour and is fully power backed. It is suitable for continuous and speedy processing of vegetables. The conditions such as feed race conveyor movement and steam flow can be optimized depending on the vegetable to be blanched. The operating system reduces the labour requirement and cost of processing.



(19) INDIA


(54) Title of the invention : "PROTECTED CONTACT DATA IN AN ELECTRONIC DIRECTORY "

(51) International classification :GO6 F1/00


:NA :NA


:NA :NA


:NA :NA



1)ABHISHEK KUMAR MISHRA

(57) Abstract : A sever application allows an administrator of a server to selectively designate contact data of a particular individual to be encrypted prior to storage in a shared electronic directory. The server application encrypts any designated content and stores the encrypted content in the shared electronic directory. The server application is responsive to a valid directory request received from a user of a telecommunication device to transfer encrypted content and non-encrypted content to the telecommunication device. The server application also transfers a decryption key land a key expiration parameter from the server to the telecommunication device, A client application executing on the telecommunication device can use the decryption key within a time period defined by the key expiration parameter to decrypt encrypted contacted data on the telecommunication device to initiate contact with the particular individual.



(19) INDIA


(54) Title of the invention : A FEMALE CONTRACEPTIVE FOR TRANSCERVICAL DELIVERY AND A PROCESS FOR PREPARATION THEREOF

(51) International classification :A61F 9/00


:NA :NA


:NA :NA


:NA :NA


1)SUJOY KUMAR GUHA Address of Applicant :3, MANGLA APARTMENTS, G BLOCK, KALKJI, NEW DELHI-110019, INDIA Delhi India (72)Name of Inventor :

1)SUJOY KUMAR GUHA

(57) Abstract : A female contraceptive for transcervical approach consisting of a chemical complex of iodine, itaconic acid and methyl methacrylate in a solvent is provided. Further, a process for preparation of female contraceptive for transcervical approach comprising complexing solution of itaconic acid-methyl methacrylate copolymer comprising itaconic acid and methyl methacrylate in a ratio varying from about 1:3 to about 1:8 respectively with solution of iodine to produce chemical complex of iodine, itaconic acid and methyl methacrylate is also provided.



(19) INDIA


(54) Title of the invention : "A COMPOSITION FOR INSTANT DECONTAMINATION OF SULFUR MUSTARD AND PROCESS OF PREPARATION THEREOF"

(51) International classification :A61K (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)DIRECTOR GENERAL ,RESEARCH DEVELOPMENT

ORGANISATION Address of Applicant :MINISTRY OF DEFENCE, GOVT. OF INDIA, ROOM NO. 38, B-WING, DRDO BHAWAN, RAJAJI MARG, NEW DELHI Delhi India (72)Name of Inventor :

1)VINOD KUMAR 2)MAHABIR PARSHAD KAUSHIK

(57) Abstract : The present invention relates to a composition for instant decontamination of sulfur mustard and process of preparation, comprising N-chlorocyanamide (NCC) derivatives, the said composition is capable to decontaminate the highly toxic organosulfur compounds.



(19) INDIA


(54) Title of the invention : "SUPPORTING THE ACCURATE CHROLOLOGICAL ORGANIZATION OF RFID TAG DATA FROM DISTRIBUTED SOURCES"

(51) International classification :G06K 19/00


:NA :NA


:NA :NA


:NA :NA



1)THOMAS VEST 2)FLEMMING GREGERSEN 3)KENNETH PUGGARD 4)ANUSH KUMAR 5)JANAKI RAM GOTETI 6)RAMACHANDRAN VENKATESH

(57) Abstract : A computer-implemented method is disclosed for encouraging an accurate chronological organization of radio frequency identification (RFID) tag data gathered from distributed servers. The method includes limiting the processing of RFID tag 10 data based at least in part on the operational status of a plurality of sources of RFID tag data.



(19) INDIA


(54) Title of the invention : "COUNTEREXAMPLE DRIVEN REFINEMENT FOR ABSTRACT INTERPRETATION"



:NA :NA


:NA :NA


:NA :NA



1)SRIRAM K. RAJAMANI 2)BHARGAV GULAVANI

(57) Abstract : A refinement system automatically identifies whether a detected error in a target system during abstract interpretation is a false error or a true error and adjusts the interpretation to prevent the false error. The target system is represented as a transition system with an initial state and state transitions and a specification that the target system is to satisfy. The refinement system iteratively performs steps of the abstract interpretation using a widening operator. When the state of a step does not satisfy the specification, the refinement system identifies a step whose widening operator was the source of the state that did not satisfy the specification and applies a more precise operator that eliminates the problem with the widening. The refinement system then starts re-performing the steps starting at that step.



(19) INDIA


(54) Title of the invention : "EFFICIENT AND LAYERED SYNCHRONIZATION PROTOCOL FOR DATABASE SYSTEMS"



:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROSOFT WAY, REDMOND, WASHINGTON 98052, UNITED STATES OF AMERICA. U.S.A. (72)Name of Inventor :

1)CHARUMATHY V. NARAYANAN 2)SUDARAHAN A. CHITRE

(57) Abstract : An efficient and layered synchronization protocol for database systems is disclosed. A mechanism is provided for efficient synchronization of data between storage systems such as relational databases, object stores, etc. Synchronization capabilities may be defined and grouped into several levels that support specific scenarios. The levels may be defined in increasing order of capabilities. Such a synchronization protocol may be designed to work over communication protocols, such as HTTP, for example, between mobile devices and servers. The synchronization protocol may be an XML-based protocol that includes an envelope for handling extensibility and modularity and a body for representing data and metadata within the envelope.



(19) INDIA


(54) Title of the invention : 'MULTI-USER MULTI-INPUT APPLICATION FOR EDUCATION "

(51) International classification :GO6F(31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA



1)KENTARO TOYAMA 2)UDAI SINGH PAWAR

(57) Abstract : A multi-user multi-input application for education is described. In one aspect, a user interface (UI) presenting pedagogical tasks of varied type and multiple cursors are presented on a single display. Each cursor is assigned to a particular user of multiple users. Actions associated with cursor control event data are mapped to particular users. Relative successes of respective ones of the users in completing particular types of pedagogical tasks of are determined.



(19) INDIA


(54) Title of the invention : A PROCESS FOR THE PREPARATION OF INSTANT GERMINATED PULSES/LEGUMES VIZ GREEN GRAM, BENGAL GRAM AND GREEN PEAS



:NA :NA


:NA :NA


:NA :NA


1)DIRECTOR GENERAL DEFENCE RESEARCH &

DEVELOPMENT ORGANISATION Address of Applicant :MINISTRY OF DEFENCE GOVT. OF INDIA, WEST BLOCK-VIII, WING 1, SECT-1, R.K. PURAM, NEW DELHI-110066. Delhi India (72)Name of Inventor :

1)PRAKASH EAKANATHRAO PATKI 2)PAPPI RAY 3)SOMASHEKARAN PANDIT SRIHARI 4)GOPAL KUMAR SHARMA 5)AMARINDER SINGH BAWA

(57) Abstract : The present invention relates to a process for preparation of instant germinated pulses/ legumes viz. Green gram, bengal gram and green peas having high vitamin content and their curry mixes with six month to one year shelf life under ambient conditions.



(19) INDIA


(54) Title of the invention : "FLOOD PROTECTION"

(51) International classification :E04B 1/346


:NA :NA


:NA :NA


:NA :NA


1)BIG BAG HARBECK GMBH Address of Applicant :INDUSTRIESTRASSE 11, D-84364 BAD BIRNBACH, GERMANY. Germany (72)Name of Inventor :

1)RUDOLF HARBECK

(57) Abstract : The invention relates to flood protection comprising a plurality of fillable sacks consisting of flexible fabric material, with mutually adjacent coupling sides of adjacent sacks being connected to one another in a coupling region and with at least one stiffening structure being associated with each coupling region and extending from the base region of the sacks up to their upper marginal region.



(19) INDIA


(54) Title of the invention : "HIGH PERFORMANCE ISOLATED DRIVE CIRCUIT FOR POWER DEVICES ."

(51) International classification :G09G 3/00


:NA :NA


:NA :NA


:NA :NA


1)SANJAY AGGARWAL Address of Applicant :144, MUNIRKA ENCLAVE, NEW DELHI - 16, INDIA. Delhi India (72)Name of Inventor :

1)SANJAY AGGARWAL

(57) Abstract : The present invention relates to a high performance isolated drive circuit for power devices comprising: at least one transformer (T-1) at least one rectifier (D-l) connected to one output of said transformer(s) (T-l), at least one storage device having one terminal connected to the output of said rectifier (D-l) through an isolator element (R-l) and second terminal connected to second output terminal of said transformer (T-l), a set of series connected high speed, switching devices (Q-l. Q-2) connected across the charge storage device. a set of control elements (R-2, R-3) controls said switching devices (Q- 1, Q-2) being connected to output terminals of said transformer and the control input of said switching devices and also provide feedback to the input of said transformer the common output terminal of said switching devices (0-1. Q-2) being connected to the drive terminal of the power device. The common terminal of said power device being connected to said charge storage device.



(19) INDIA


(54) Title of the invention : "WINDOW GROUPING"



:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROSOFT WAY, REDMOND, WASHINGTON 98052, UNITED STATES OF AMERICA. U.S.A. (72)Name of Inventor :

1)NURIA M. OLIVER, 2)CHINTAN S. THAKKAR 3)ARUNGUNRAM C. SURENDRAN 4)GREGORY R. SMITH

(57) Abstract : A framework is provided for obtaining window information. The window information can be applied to different assignment models to assign windows to different groups. A group may correspond to a task being performed by a user. The window information can be semantic or temporal information captured as window events and properties of windows whose events are captured. Temporal information can be information about switches between windows. Semantic information can be window titles. Temporal information, semantic information, or both, can be used to assign windows to groups.



(19) INDIA


(54) Title of the invention : "READY -TO- DRINK TOMATO SOUP AND PROCESS THEREOF"



:NA :NA


:NA :NA


:NA :NA



DEVELOPMENT ORGANISATION Address of Applicant :MINISTRY OF DEFENCE, GOVT OF INDIA, ROOM NO. 348, B-WING, DRDO BHAWAN, RAJAJI MARG, NEW DELHI Delhi India (72)Name of Inventor :

1)SHASHI KANT SINGH 2)SUBBAPPA NATARAJU 3)SHANMUGAM NADANASABAPATHY 4)AMRINDER SINGH BAWA

(57) Abstract : The present invention discloses a method for preparation and processing of ready-to-drink tomato soup packed in hermetically sealed multilayer flexible retortable pouch. Ready-to-drink tomato soup prepared by said method retains original quality attributes. Ready-to-drink tomato soup disclosed in the present invention does not require addition of any stock and further cooking. It is free of chemical preservatives and anti-microbial agents. The ready-to-drink tomato soup has longer shelf life under all climatic/environmental conditions.



(19) INDIA


(54) Title of the invention : SYSTEM AND METHOD OF NON-INVASIVE CONTINUOUS LEVEL SENSING

(51) International classification :G01F23/28 (31) Priority Document No :11/477,032 (32) Priority Date :28/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)ALCON, INC. Address of Applicant :P.O.BOX 62, BOSCH 69, CH-6331 HUNENBERG,SWITZERLAND. Switzerland (72)Name of Inventor :

1)GAO, SHAWN X.

(57) Abstract : Embodiments of the present invention provide a system and method for detecting the level of a fluid in a surgical cassette by projecting light from a linear light source into a wall of a cassette. Depending on the amount a light reflected or refracted in the cassette (i.e., due to the cassette material/fluid interface or cassette material/air interface (or other interface)) various portions of a linear sensor array will be more or less illuminated. By examining the illumination of the linear sensor array, the level of fluid in the chamber can be determined.



(19) INDIA


(54) Title of the invention : A PROCESS FOR THE PREPARATION OF 1,2,3,4-TETRAHYDRO- β-CARBOLINE DERIVATIVES



:NA :NA


:NA :NA


:NA :NA


1)COUNCIL OF SCIENTIFIC & INDUSTRIAL RESEARCH Address of Applicant :ANUSANDHAN BHAWAN, RAFI MARG, NEW DELHI. Delhi India (72)Name of Inventor :

1)DR. DIPAK PRAJAPATI 2)DR. RAMESH CH. BARUAH

(57) Abstract : The present invention provides a process for the preparation of 1,2,3,4-tetrahydro β-carboline derivatives. The process includes the reaction of tryptamine with a substituted aldehyde in the presence of molecular iodine, which enhances the efficiency of the Pictet-Spengler condensation. The product obtained from the reaction mixture is pure and the yield is 80-91%.



(19) INDIA


(54) Title of the invention : COMPOSITE HEAD FOR DISPENSER


:NA :NA


:NA :NA


:NA :NA


1)LOIN HOLDINGS PVT. LTD Address of Applicant :F-2, KAILASH PLAZA H-252, SANT NAGAR NEW DELHI-110 065 Delhi India (72)Name of Inventor :

1)T.K. DATTA

(57) Abstract : A new idea on head of dispenser pump is being disclosed. The new composite head assembly has two distinct components; a separately moulded part called "thumb" of one or another design and the newly designed "functional dispensing part", which is also manufactured by injection moulding separately. Both the parts of new dispenser head are joined by mechanical press-fitment and/or by ultrasonically welding and/or heat seal welding and/or adhesive joints. The lower part of the functional dispensing part is to be ultrasonically welded and/or heat seal welded and/or adhesively jointed to the upper side of the piston in this way the functional dispensing part after welding/joining to the piston becomes a part of the composite unit (Thumb + Functional dispensing part + piston) where the steel ball in side the piston stays inaccessible to the consumers, mainly children, thus making it a child safe pack. Proposed dispenser is capable of having variety of colours or colour combinations in its two above-mentioned parts. In the new composite head system a thumb of any design can be fixed on the same functional dispensing part, without any alteration in the size and structural design of the later. Two separate injection moulded parts of proposed composite dispenser head (thumb and functional dispensing part) are individually of simple design and shape and can be moulded more economically at speed higher from the conventional head. The new composite head for dispenser may be of metal, plastic, alloy and combination of these materials.



(19) INDIA


(54) Title of the invention : "SPIRIT STOVE"

(51) International classification :F23D 3/40 (31) Priority Document No :0101285.5 (32) Priority Date :11/04/2001 (33) Name of priority country :Sweden (86) International Application No Filing Date

:PCT/EP02/04064 :11/04/2002


:NA :NA


:NA :NA


1)DOMETIC AKTIEBOLAG Address of Applicant :TORGGATAN 8, 171 54 SOLNA, SWEDEN. Sweden (72)Name of Inventor :

1)EBBESON, HANS, BENGT 2)ANDERSSON, HANS-OLOF 3)RAGNARSSON, RALF

(57) Abstract : This invention relates to a sprit stove that comprises a one piece, bottomless, metal frame (10) having mainly vertical walls (12) continuing into a mainly horizontal hob (13). The hob has one or several preferably upwardly extending fire place parts (17) designed as flame spreaders (19) and encloses a fuel container (21) and a burner arrangement (20).



(19) INDIA


(54) Title of the invention : "METHOD FOR ACQUIRING BAND CLASS IN A INFORMATION"

(51) International classification :H04Q (31) Priority Document No :60/355,469 (32) Priority Date :07/02/2002 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US03/03634 :06/02/2003


:NA :NA


:NA :NA


1)MOTOROLA, INC. Address of Applicant :1303 EAST ALGONQUIN ROAD, SCHAUMBURG, ILLINOIS, 60196, U.S.A. U.S.A. (72)Name of Inventor :

1)SEAN S. KELLEY

(57) Abstract : A communication system 100 acquires band class information and assigns a band class to MS 102 when the MS is engaged in a process of initiating a connection with infrastructure 104. The MS informs the infrastructure of the MS's band class capabilities when the MS initially performs an access attempt with the infrastructure in a reveres link associated with a first band class, that is, on r-csch 142 in reverse link 140. When the band class where the MS initially attempts access is congested, or the infrastructure desires to switch the MS to a second, alternate band class for any other reason, the infrastructure is able to immediately determine the band classes supported by the MS and to immediately assign the MS to a f-csch 132 or traffic channel 134 in a forward link 130 that is associated with the second, alternate band class supported by the MS.



(19) INDIA


(54) Title of the invention : "DETECTION AND MANAGEMENT OF ROGUE WIRELESS NETWORK CONNECTIONS"

(51) International classification :H04L 12/18


:NA :NA


:NA :NA


:NA :NA



1)ALASTAIR WOLMAN 2)BRIAN D. ZILL 3)JITENDRA D. PADHYE 4)RANVEER CHANDRA 5)PARAMVIR BAHL 6)MANPREET SINGH 7)LENIN RAVINDRANATH SIVALINGAM

(57) Abstract : A method of detecting rogue devices that are coupled to a wired network without generating false negative or false positive alerts is provided. When a wireless monitor detects an observed SSID and/or BSSID, various tests are run to determine whether the observed device is actually coupled to the wired network. To guard against the suspect device spoofing an authorized SSID and/or BSSID, location information is gathered so that the network administrator can pinpoint the location of the rogue device. If the device is not recognized, various other tests are run to determine whether the unrecognized device is actually connected to the wired network. These tests include an association test, a MAC address test, an ARP test, a packet replay test, a correlation test, and/or a DHCP fingerprint test. Once it is determined that the suspect device is a rogue connected to the wired network, an appropriate alert is generated.



(19) INDIA


(54) Title of the invention : A PROCESS FOR PRODUCING SUGAR AND ALCOHOL FROM SUGARCANE



:NA :NA


:NA :NA


:NA :NA


1)SUNIL SINGHAL Address of Applicant :M-48, II FLOOR, MARKET GRAETER KAILASH II, NEW DELHI-110048, INDIA. Delhi India 2)JEEWAN JYOTI BHAGAT (72)Name of Inventor :

1)SUNIL SINGHAL 2)JEEWAN JYOTI BHAGAT

(57) Abstract : This invention relates to a process for producing sugar from sugarcane comprising the steps of adjusting pH of primary juice, primary heating of the primary juice as herein described, phosphoflotation in a clarifier, secondary heating of the clear juice obtained from the clarifier, introduction of heated juice into evaporator.



(19) INDIA


(54) Title of the invention : "APPARATUS AND METHOD FOR CONTROLLING PACKET DATA TRANSMISSION BETWEEN BSC AND BTS"

(51) International classification :H04L 12/56 (31) Priority Document No :26142/2001 (32) Priority Date :14/05/2001



:PCT/KR02/00898 :14/05/2002


:NA :NA


:NA :NA



1)SUNG-WON LEE

(57) Abstract : Disclosed is an apparatus and method for controlling packet data transmission between a base station controller (BSC) and a base transceiver system (BTS) in a mobile communication network. The BSC transmits as much packet data as an amount that can be actually stored in a buffer of the BTS. The BTS has the buffer for temporarily storing the packet data, to be transmitted to a mobile station, received from the BSC.



(19) INDIA


(54) Title of the invention : "DISC CARTRIDGE AND DISC DRIVE APPARATUS USING THE SAME"

(51) International classification :G11B 23/03 (31) Priority Document No :2002-43866 (32) Priority Date :25/07/2002 (33) Name of priority country :Republic of Korea (86) International Application No Filing Date

:PCT/KR2002/002352 :13/12/2002


:NA :NA


:NA :NA


1)SAMSUNG ELECTRONICS CO., LTD. Address of Applicant :416, MAETAN-DONG, YEONGTONG-GU, SUWON-SI, GYEONGGI=DO 442-742, REPUBLIC OF KOREA. Republic of Korea (72)Name of Inventor :

1)EUM, JAE-YONG 2)KO, JUNG-WAN 3)JANG, DONG-SEOB 4)KIM KWANG 5)KWEON, HAE-SUB 6)CHOI, HAN-KOOK

(57) Abstract : In a disc cartridge including a case in which a disc in accommodated and which is guided by both side walls of a holder when inserted in a holder of a disc drive apparatus, the case includes flat surface portions formed to have a surface contract with both side walls of the holder, and curved surface portions connecting the flat surface portions. Thus, since the corner portions of the case of the disc cartridge have round shapes, compact products can be manufactured. Also, since the cartridge has a surface contact wit the inner wall of the holder when the cartridge enters in the holder of the disc, a loading work can be stably and accurately performed.



(19) INDIA


(54) Title of the invention : "COMPOUNDS"


(31) Priority Document No :0428173.9 (32) Priority Date :23/12/2004(33) Name of priority country :U.K. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)ASTRAZENECA AB, Address of Applicant :S-151 85 SODERTALJE, SWEDEN, Sweden (72)Name of Inventor :

1)VIJAY KUMAR HULIKAL 2)KUDUR RANGANTHA RAO

(57) Abstract : The use of a compound of the formula (I) or a pharmaceutically acceptable salt or an in vivo hydrolysable ester thereof in the manufacture of a medicament for the treatment of Mycobacterium tuberculosis (M.tb).



(19) INDIA


(54) Title of the invention : "HYBRID BRUSHLESS ELECTRIC MACHINE"

(51) International classification :H02K 21/04 (31) Priority Document No :60/168,995 (32) Priority Date :03/12/1999 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US00/42481 :01/12/2000

(87) International Publication No : WO/2001/042649

(61) Patent of Addition to Application Number Filing Date

:NA :NA


:IN/PCT/2002/00562/DEL:03/06/2002


1)ECOAIR CORP. Address of Applicant :FOUR INDUSTRIAL CIRCLE, HAMDEN, CT 06517-3152, UNITED STATES OF AMERICA U.S.A. (72)Name of Inventor :

1)ECOAIR CORP. 2)IFRIM, COSTIN

(57) Abstract : A brushless electric machine (10) comprising a housing (12) fabricated from a magnetically permeable material and having an interior region, a stator (13) mounted within the interior region and attached to the housing (12) wherein the stator (13) has a stator winding (13a), a rotor (14) mounted for rotation about a rotational axis (18) within the stator (13). The rotor (14) comprises a plurality of magnetic pole pieces (28a-f) and permanent magnets (28a-28f) circumferentially arranged in an alternating configuration such that each permanent magnet (28a-f) is positioned intermediate a pair of consecutive magnetic pole pieces(26a-f) and the axis (18) of magnetization lies in the plane of rotation of the rotor (14). The rotor (14) is separated from the stator windings (13a) by a first air gap (15) so as to form a first magnetic circuit. The rotor (14) further comprises a first side, a first rotor end cap (24) attached to the first side, a second side, and a second rotor end cap (22) attached to the second side. Each rotor end cap (22,24) contacts at least some of the magnetic pole pieces (26a-f). Each rotor end cap (22,24) is fabricated from a magnetically permeable material. The burshless electric machine (10) further comprises a pair of excitation windings (30,32). Each excitation winding (30,32) is secured to the housing (12) on either side of the rotor (14) such that the excitation winding (30,32) extends circumferentially in the plane of rotation of the rotor (14) and about a corresponding rotor end cap (22,24). The excitation windings (30,32) are separated from the rotor end caps (22,24) by a second air gap (33a). The first and second air gaps (33a-b) cooperate to form a second magnetic circuit.



(19) INDIA


(54) Title of the invention : "CACHE COHERENCY CONTROLLER MANAGEMENT"



:NA :NA


:NA :NA


:NA :NA


1)INTEL CORPORATION Address of Applicant :22O0 MISSION COLLEGE BOULEVARD, SANTA CLARA, CA 95052, USA U.S.A. (72)Name of Inventor :

1)JOSHI CHANDRA P.

(57) Abstract : Methods and apparatus to manage cache coherency are disclosed. In one embodiment, an apparatus comprises a first processor comprising a first processing unit, a first cache memory, and a first coherence controller, and an input/output module having one or more output ports. The first coherence controller comprises an arbitration logic module to direct a message into a processing pipeline and an output issue logic module. The output issue logic module analyzes a message in the processing pipeline, directs the message to an output queue when an output port is unavailable or when the message cannot bypass the output queue, and sends the message to the output port when one or more output ports are available or when the output queue can be bypassed.



(19) INDIA


(54) Title of the invention : "TRANSDERMAL PATCH WITH PROGESTERONE A-SPECIFIC LIGANDS (PRASL) AS ACTIVE INGREDIENT"



(32) Priority Date :20/12/2004(33) Name of priority country :Germany (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SCHERING AKTIENGESELLSCHAFT Address of Applicant :MULLERSTRASSE 178, 13353 BERLIN, GERMANY. Germany (72)Name of Inventor :

1)HANS-PETER PODHAISKY 2)STEFAN BRACHT

(57) Abstract : The invention relates to a transdermal patch with progesterone A-specific ligands (PRASL) as active ingredient, consisting of a backing layer, of at least one active ingredient-containing adhesive layer which adheres thereto and is based on a silicone polymer, a polyisobutylene polymer (PIB), a polyacrylate polymer or a styrene block copolymer with butadiene or isoprene (SBS or SIS) , and of a removable protective film. The transdermal therapeutic patch according to the invention comprising PRASL where appropriate also in combination with oestrogens is suitable for hormone replacement therapy and for fertility control.



(19) INDIA


(54) Title of the invention : COM0POUND AND PROCESSES FOR THE PREPARATION AND USE THEREOF

(51) International classification :C07F 9/06 (31) Priority Document No :0211751.3 (32) Priority Date :22/05/2002 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/GB03/02172 :20/05/2003


:NA :NA


:NA :NA


1)AVECIA LIMITED, Address of Applicant :HEXAGON HOUSE, BLACKLEY, MANCHESTER M9 8ZS, ENGLAND. U.K. (72)Name of Inventor :

1)JONATHAN WILLIAM WIFFEN

(57) Abstract : A compound of Formula (1) is provided wherein X represents an optionally substituted hydrocarbyl linking group; R' represents an optionally substituted hydrocarbyl group, P1 and P2 are protecting groups, Q represents a group of formula Y, -OZ, or -SZ; Y represents a group forming a Wittig reagent, a P, As or Sb-containing Horner-Wadsworth Emmons or Warren reagent, a P(lll), As (III) or Sb(lll) precursor of a Horner-Wadsworth Emmons or Warren reagent or an ylid precursor, and Z represents a group forming a P(lll), As (III) or Sb(lll) precursor of a Horner-Wadsworth Emmons or Warren reagent, or a P(V), As(V) or Sb(V) leaving group.



(19) INDIA


(54) Title of the invention : "PSEUDOPOLYMORPHIC FORMS OF A HIV PROTEASE INHIBITOR"

(51) International classification :C07D 493/04 (31) Priority Document No :02076929.5 (32) Priority Date :16/05/2002



:PCT/EP03/50176 :16/05/2003


:NA :NA


:NA :NA


1)TIBOTEC PHARMACEUTICALS LTD. Address of Applicant :LITTLE ISLAND, CO CORK, IRELAND Ireland (72)Name of Inventor :

1)HANS WIM PIETER VERMEERSCH 2)DANIEL JOSEPH CHRISTIAAN THONE 3)LUC DONNE MARIE-LOUISE JANSSENS

(57) Abstract : New pscudopolymorphic forms of (3R,3aS,6aR)-hcxahydrofuro [2,3-b] furan-3-yl (lS,2R)-3-[[(4-aminophenyl)sul-fonyl](isobutyl)araino]-I-benzyl-2hydroxypropylcarbamate and processes for producing them are disclosed.



(19) INDIA


(54) Title of the invention : "DEVICE FOR POWERING A RECIPROCATING PUMP"

(51) International classification :F16H 19/02

(31) Priority Document No :GB 0101644.3

(32) Priority Date :23/01/2001(33) Name of priority country :U.K. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)TRANSRURAL TRUST Address of Applicant :17, NARROW HILL, WITNEY, OXON OX8 6DF BRITISH ISLES (72)Name of Inventor :

1)MR JOHN ANTHONY LUCEY

(57) Abstract : A device for translating rotary into reciprocal motion, of particular valve for pumps, that comprises a linked-up chain 14 that is held by plates 15 & 16 so that it can only move as part of an assembly 2 in a reciprocating fashion and in which a sprocket 9, mounted on the shaft 10 of a gearbox, is held in engagement with the inside of the chain by having the gearbox mounted on a bracket 8 which can oscillate about a fixed axis of bearing 13 and by a cam follower 11 riding on a cam 12 that is mounted on the same assembly as the chain.



(19) INDIA


(54) Title of the invention : "METHOD FOR THE PRODUCTION OF UREA FERTILIZER WITH ELEMENTAL SULPHUR AND THE PRODUCT THEREOF"

(51) International classification :C05C 9/00 (31) Priority Document No :PCT/NO02/00214 (32) Priority Date :17/06/2002 (33) Name of priority country :PCT (86) International Application No Filing Date

:PCT/NO02/00214 :17/06/2002


:NA :NA


:NA :NA


1)YARA INTERNATIONAL ASA Address of Applicant :P.O. BOX 2464 SOLLI, N-0202 OSLO, NORWAY. Norway (72)Name of Inventor :

1)SVEN KOHNKE 2)UWE LADWIG 3)JURGEN MAAZ 4)UDO STARK

(57) Abstract : The present invention relates to a method for the production of a urea fertilizer with elemental sulphur from sulphur in liquid stage and a liquid urea melt. The surface tension between the two phases of sulphur and urea are influenced in the liquid stage at temperatures above the melting points, by supply of an additive being temperature stable and amphoteric to the liquid suphur / urea melt to obtain a homogeneous mixed phase, that subsequently is distributed and solidified. The invention also relates to a urea -sulphur fertilizer where the fertilizer comprises urea and elemental sulphur and an additive being temperature stable and amphoteric.



(19) INDIA


(54) Title of the invention : "INITIATING CONTACT USING PROTECTED CONTACT DATA IN AN ELECTRONIC DIRECTORY"

(51) International classification :H04M 1/00


:NA :NA


:NA :NA


:NA :NA


1)MICROSOFT CORPORATION Address of Applicant :ONE MICROSOFT WAY, REDMOND, WASHINGTON 98052, USA. U.S.A. (72)Name of Inventor :

1)ABHISHEK KUMAR MISHRA

(57) Abstract : A client application allows a user of a telecommunication device to retrieve contact data of a particular individual from a server to initiate contact with the particular individual without viewing content designated as private by the particular individual. The retrieved contact data includes encrypted content and non-encrypted content. The telecommunication device sends a directory request to the server requesting contact data from an electronic directory stored on the server. If the directory request is validated by the server, the telecommunication device receives the requested contact data from the server. The telecommunication device also receives a decryption key and a key expiration parameter from the server. The client application executing on die telecommunication device can use the decryption key within a time period defined by the key expiration parameter to decrypt encrypted contacted data on the telecommunication device to initiate contact with the particular individual.



(19) INDIA


(54) Title of the invention : 'SOLVING TABLE LOCKING PROBLEMS ASSOCIATED WITH CONCURRENT PROCESSING"

(51) International classification :G06T 17/50


:NA :NA


:NA :NA


:NA :NA



1)HARSHAWARDHAN MADHUKAR DESHPANDE

(57) Abstract : Stored pages in an electronic database are re-ordered such that the data that is being requested by multiple processes is re-ordered to be spread over several different pages such that a lock on a first page will no longer lock processes from data on the locked page.



(19) INDIA


(54) Title of the invention : "CRANKCASE HEATER CONTROL"

(51) International classification :F04B 39/06


:NA :NA


:NA :NA


:NA :NA


1)CARRIER CORPORATION Address of Applicant :CARRIER PARKWAY P.O. BOX 4800, SYRACUSE, NEW YORK 13221, U.S.A. U.S.A. (72)Name of Inventor :

1)O'BRIEN MICHAEL J. 2)YANG GEORGE C. 3)COLLINS MICHAEL

(57) Abstract : A controller for controlling a heater associated with the crankcase of a compressor senses electrical current flowing through the heater. The sensing is preferably accomplished by a transformer in combination with an amplifier providing a feedback signal to the controller. The transformer is installed in the line which carries the electrical current flowing through the heater. The controller checks for the presence of an appropriate voltage level from the amplifier. In the event that the voltage level is not above a threshold level, the controller sends an alarm signal indicating that the heater is not operating properly.



(19) INDIA


(54) Title of the invention : LOW POWER DIFFERENTIAL LINK INTERFACE METHODS AND APPARATUSES"

(51) International classification :H04L 25/02 (31) Priority Document No :10/611,079 (32) Priority Date :30/06/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/020832 :23/06/2004


:NA :NA


:NA :NA


1)INTEL CORPORATION Address of Applicant :2200 MISSION COLLEGE BOULEVARD, SANTA CLARA, CALIFORNIA 95052, U.S.A. U.S.A. (72)Name of Inventor :

1)MULJONO, HARRY 2)RUSU, STEFAN

(57) Abstract : A driver of a first component and a receiver of a second component of a system are equipped to operate at least one of the driver and the receiver in a low power consumption state, during at least a portion of a quiescent state, when transmitting data from the first to the second component differentially, via a link interface with two lines, coupling the components. The driver and the receiver include respective monitor circuits to detect for the quiescent state, with the driver's monitor circuit monitoring for constancy over a predetermined period, and the receiver's monitor circuit monitoring for zero states on both lines. Further, in one embodiment, the driver's monitor circuit places the driver in the low power consumption state by grounding the two lines.



(19) INDIA


(54) Title of the invention : "NEW P2X7 RECEPTOR ANTAGONISTS AND THEIR USE"

(51) International classification :C07D 215/38 (31) Priority Document No :0312609.1 (32) Priority Date :02/06/2003 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/SE2004/000836 :01/06/2004


:NA :NA


:NA :NA


1)ASTRAZENECA AB Address of Applicant :S-151 85 SODERTALJE SE , SWEDEN Sweden (72)Name of Inventor :

1)EVANS, RICHARD 2)EYSSADE, CHRISTINE 3)FORD, RHONAN 4)MARTIN, BARRIE 5)THOMPSON, TOBY 6)WILLIS, PAUL

(57) Abstract : The invention provides compounds of formula (IA), processes for their preparation, pharmaceutical compositions containing them, and their use in therapy. [Chemical formula should be inserted here. Please see paper copy] (IA).



(19) INDIA


(54) Title of the invention : "METHOD OF MAKING A MAT"

(51) International classification :D06N 7/00 (31) Priority Document No :0214103.4 (32) Priority Date :13/06/2002 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/GB03/02525 :12/06/2003


:NA :NA


:NA :NA


1)MILLIKEN INDUSTRIALS LIMITED Address of Applicant :BEECH HILL PLANT, GIDLOW LANE, WIGAN, LANCASHIRE WN6 8RN, GREAT BRITAIN. U.K. (72)Name of Inventor :

1)PETER CHARLES BRAZIER 2)THOMAS ALBERT PATRICK BROCK 3)ROBERT C. KERR 4)BHAWAN PATEL 5)FLEMMIING BOJSTRUP 6)PATRICK MOREL

(57) Abstract : A method of making a mat with a textile surface and an elastomer backing is provided. The method includes mixing elastomer crumbs and a binder, depositing the crumb/binder mixture in a layer (22), placing a textile surface element (34) on the layer to form a mat assembly, and pressing the mat assembly in a press (9) while setting the binder. The elastomer crumbs are consolidated to form an elastomer backing (2) that includes voids between the elastomer crumbs, and the textile surface element is bonded to the elastomer backing to form the upper textile layer (1) of the mat.



(19) INDIA


(54) Title of the invention : "METHOD AND APPARATUS FOR BONDING MATERIALS, ESPECIALLY MATERIALS USED IN ABSORBENT ARTICLES"

(51) International classification :A61F 13/15 (31) Priority Document No :10/456,288 (32) Priority Date :06/06/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/017875 :07/06/2004


:NA :NA


:NA :NA


1)THE PROCTER & GAMBLE COMPANY Address of Applicant :ONE PROCTER & GAMBLE PLAZA, CINCINNATI, OH 45202 US U.S.A. (72)Name of Inventor :

1)MCFALL, RONALD, RAY 2)DEHAAN, DENNIS, ALLEN

(57) Abstract : Methods of and apparatus for bonding and/or embossing of materials (20), especially materials used in the manufacture of hygienic articles, including, but not limited, to absorbent articles such as feminine hygiene articles, disposable diapers, incontinence devices, wipes, and the like.



(19) INDIA


(54) Title of the invention : "PYRIDINYL CARBAMATES AS HORMONE-SENSITIVE LIPASE INHIBITORS."

(51) International classification :C07D 401/06 (31) Priority Document No :PA 2003 00879 (32) Priority Date :12/06/2003 (33) Name of priority country :Denmark (86) International Application No Filing Date

:PCT/DK2004/000391 :08/06/2004


:NA :NA


:NA :NA


1)NOVO NORDISK A/S Address of Applicant :NOVO ALLE, BAGSVAERD 2880 DENMARK Denmark (72)Name of Inventor :

1)CORNELIS DE JONG JOHANNES 2)JACOBSEN POUL 3)EBDRUP SOREN

(57) Abstract : Novel substituted pyridinyl carbamates, pharmaceutical compositions comprising them and use thereof in the treatment and/or prevention of diseases and disorders related to hormone sensitive lipase. More particularly, the compounds are useful for the treatment and/or prevention of diseases and disorders in which modulation of the activity of hormone sensitive lipase is beneficial.



(19) INDIA


(54) Title of the invention : "MACROCYCLIC QUINAZOLINE DERIVATIVES AS ANTIPROLIFERATIVES AGENTS"

(51) International classification :A61K 31/529 (31) Priority Document No :PCT/EP03/05723 (32) Priority Date :27/05/2003 (33) Name of priority country :PCT (86) International Application No Filing Date

:PCT/EP04/005621 :25/05/2004


:NA :NA


:NA :NA


1)JANSSEN PHARMACEUTICA N.V. Address of Applicant :TURNHOUTSEWEG 30, 2340 BEERSE, BELGIUM. Belgium (72)Name of Inventor :

1)EDDY JEAN EDGARD FREYNE 2)TIMOTHY PIETRO SUREN PERERA 3)PETER JACOBUS JOHANNES ANTONIUS BUIJNSTERS 4)MARC WILLEMS 5)GASTON STANISLAS MARCELLA DIELS 6)WERNER CONSTANT JOHAN EMBRECHTS 7)PETER TEN HOLTE 8)FREDERIK JAN RITA ROMBOUTS 9)CARSTEN SCHULTZ-FADEMRECHT

(57) Abstract : The present invention concerns the compounds of formula (I) the N-oxide forms, the pharmaceutically accept able addition salts and the stereochemically isomeric forms thereof, wherein Z represents O, CH2, NH or S; in particular Z represents NH; Y represents -C3-9alkyl-, -C3-9alkenyl-, -C3.9alkynyl-, -C3.7alkyl-CO-NH- optionally substituted with amino, mono- or di(C1-4alkyl)amino or C1-4 alkyloxycarbony- lamino-, -C3.7alkenyl-CO-NH- optionally substituted with amino, mono- or di (C1-5alky) amino- or C1-4alkyloxycarbony- lamino-, C1-5'.salkyl-oxy-C1-5.salkyI-, -C1-5alkyl NR13-, -C1-5alkyl-, -C1-5alkyl-NR'-'-CO-C1-5alkyl-, -C1-5alkyl-CO NR15-C1-5alkyl-, -C1-6alkyl-CO-NH-, -C1-6alkyl-NH-CO-, -C1-3alkyl-NH-CS-Het20-, -C1-3alkyl-NH-CO-Het20-, -C1-2alkyl-CO-Het21-CO-, -Het22-CH2-CO-NH-C1-3alkyl-, -CO-NH-C1-6alkyl-, -NH-CO-C1-6aIkyl-, -CO-C1-7alkyl-, -C1-7alkyl-CO-, -C1-5alkyl-NH-CO-CR16 R17 , -C1-2alkyl-CO-NH-CR18R19-CO-, -C1-2alkyl-CO-NR20-C1.3alkyl-CO-, C1-2alkyl-NR21-CH2-CO-NH-C1-3alkyl-, or -NR22-CO-C1-3alkyl-NH-; X1 represents a direct bond, O or -O-C1-2alkyl-, CO, -CO-C1-2alkyl-, NR11, -NR11-C1-2alkyl-) CH2-, -O-N=CH- or -C1-2alkyl-; X2 represents a direct bond, O, -O-C1-2alkyl-, CO, -CO-C1-2alkyl-, NR12, -NR12-C1-2alkyl-, -CH2-, -O-N=CH- or -C1-2alkyl-. The growth inhibitory effect anti-tumour activity of the present compounds has been .demonstrated in vitro, in enzymatic assays on the receptor tyrosine kinase EGFR.



(19) INDIA


(54) Title of the invention : METHOD AND SYSTEM FOR CONTINUOUSLY COMPENSATING FOR PHASE VARIATIONS INTRODUCED INTO A COMMUNICATION SIGNAL BY AUTOMATIC GAIN CONTROL ADJUSTMENTS

(51) International classification :H04B 1/06 (31) Priority Document No :60/476,471 (32) Priority Date :06/06/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/014100 :06/05/2004


:NA :NA


:NA :NA


1)INTERDIGITAL TECHNOLOGY CORPORATION Address of Applicant :300 DELAWARE AVENUE, SUITE 527, WILMINGTON, DELAWARE 19801 USA U.S.A. (72)Name of Inventor :

1)DEMIR, ALPASLAN 2)KAZAKEVICH, LEONID 3)HAQUE, TANBIR

(57) Abstract : A communication system (100) including an automatic gain control (AGC) circuit (105), a receiver (110), an analog to digital converter (ADC) (115) and an insertion phase variation compensation module (120). The AGC circuit (105) receives and amplifies communication signals (150). The gain of the AGC circuit (105) is adjusted. The AGC circuit (105) outputs an amplified signal to the receiver (110) which, in turn, outputs an analog complex signal to the ADC (115). The ADC (115) outputs a digital complex signal to the insertion phase variation compensation module (120) which counteracts the effects of phase offsets introduced into the communication signals (150) due to the continuous gain adjustments associated with the AGC circuit (105).



(19) INDIA


(54) Title of the invention : "ARCHITECTURE FOR PRESENTING AND MANAGING INFORMATION IN AN AUTOMATED PARKING AND STORAGE FACILITY"

(51) International classification :G06F 7/00 (31) Priority Document No :10/252,235 (32) Priority Date :23/09/2002 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2003/028171 :09/09/2003


:NA :NA


:NA :NA


1)ROBOTIC TECHNOLOGY ADMINISTRATION, LLC. Address of Applicant :12812 NORTH 60TH STREET, CLEARWATER, FLORIDA 33760 U.S.A. (72)Name of Inventor :

1)HAAG, GERHARD

(57) Abstract : Architecture for management of an automated parking and storage facility (100). A management system provides interactive interface capability to access, monitor, and control the parking and storage facility (100) locally and remotely, as well as to provide limited access locally and remotely to a patron for obtaining facility products and services.



(19) INDIA


(54) Title of the invention : "A BED SEAT FOR TRANSPORTATION FACILITIES"

(51) International classification :B60N 2/34 (31) Priority Document No :10-2003-0031595 (32) Priority Date :19/05/2003 (33) Name of priority country :Republic of Moldova (86) International Application No Filing Date

:PCT/KR2003/001030 :27/05/2003


:NA :NA


:NA :NA


1)MOON, YOUNG HYUN Address of Applicant :SUITE 806-13 JANG-MI APARTMENT, SHICHUN-DONG SONGPA-KU, SEOUL 138-240, REPUBLIC OF KOREA. Republic of Korea (72)Name of Inventor :

1)MOON, YOUNG HYUN

(57) Abstract : The berth able seat of the invention is broadly adapted to various transportation facilities such as a train, a ship, an express line and an airplane as well as a passenger car and an omnibus having a front and rear seat. According to the invention, a back of the front seat is provided with an upper partition of the back of seat and lower fixing part of the back of a seat, the upper partition of the back of the seat is formed to be divided in half into a forward separating plank and backward separating plank to unfold horizontally by developing forwardly or backwardly or to stand up by folding and joining the planks, and a back of the rear seat forms a concavity for laying a head of a passenger. Thus, when the forward and backward separating planks are developed horizontally, a plain bed surface is provided so that a passenger may lie in the seat comfortably.



(19) INDIA


(54) Title of the invention : A METHOD OF DETECTING NEOPLASTIC OR NON-NEOPLASTIC CELLS.

(51) International classification :C12Q 1/68 (31) Priority Document No :PQ 6876 (32) Priority Date :13/04/2000 (33) Name of priority country :Australia (86) International Application No Filing Date

:PCT/AU2001/00429 :12/04/2001


:NA :NA


:IN/PCT/2002/01031/DEL :16/08/2002


1)MONOQUANT PTY LTD. Address of Applicant :C/- GRANT THORNTON SERVICES (SA) PTY LTD. 67 GREENHILL ROAD, WAYVILLE, SOUTH AUSTRALIA 5034, AUSTRALIA. Australia (72)Name of Inventor :

1)MORLEY ALEXANDER ALAN 2)SYEKS PAMELA JOY, 3)BRISCO MICHEAL JULION

(57) Abstract : (57) Abstract: The present invention relates to a method of qualitatively and/or quantitativel monitoring the progress of a lymphoid neoplasia in a mammal and, more particularly, to a method of monitoring the progress of a of alymphoid neoplasia utilisin screening technique. The method of the present invention is useful in a range of applications including including,but not limited to , monitoring the progression of a ncoplastic lymphoid disease condition, monitoring the levels of neplastic lymphod cells durig remission, pred,ctmg the likelihood of a subject's relapse from a remissive state to disease state or for assessing the effectiveness of existing therapeuuc dmgs and/or new therapeutic agents. In a related aspect, the preset invention also provides method for qualitatively and/or quantitatively detecting clonal lymphocyte populations a method for qualitatively lymphocyte populations in a subject such as where a neoplastic lymphoid cell has undergone somatic gene rearrangement forming a new and genetically distinct clonal population or such as where one or several clonal lymphocyte populations contribute to an immunological response.



(19) INDIA


(54) Title of the invention : "DIRECTIONAL NOZZLE AIR DISTRIBUTOR FOR FLUIDIZED BED"

(51) International classification :F23C 10/00


:NA :NA


:NA :NA


:NA :NA


1)BHARAT HEAVY ELECTRICALS LIMITED Address of Applicant :BHEL HOUSE SIRI FORT, NEW DELHI 110049, INDIA. Delhi India (72)Name of Inventor :

1)MANIVEL PILLAI RAJAVEL 2)MURUGHAN SUBRAMANI 3)SELVAM JOHN RETHINARAJ 4)ATHRIYAN LUMEN REX EARNEST THANAPAL 5)NA 6)KULAVI SAMIDURAI 7)APPU PILLAI RAJENDRAN

(57) Abstract : The invention relates to improved air distributor for fluidized bed wherein a directional nozzle air distributor (15) for fluidized bed operation wherein a multiplicity of directional air nozzles (7 A) are welded on the bed plate (3) in several directions (13) to achieve directional air flow, the top end of the nozzle (7A) being bent at an angle (8) with respect to the base plate (3), the bend angle (8) lying between 95° and 130°, the bent outer surface of the nozzle being provided with hard facing (6) to reduce erosion, said nozzles (7A) being welded in rows (12) on the bed plate (3) so that the rows are offset from one another and the pitch (11) between the nozzles being maintained between 50 mm and 200 mm.



(19) INDIA


(54) Title of the invention : "NEW BENZO[B] PYRANO [3,2-H] ACRIDIN-7-ONE CINNAMATE COMPOUNDS, A PROCESS FOR THEIR PREPARATION AND PHARMACEUTICAL COMPOSITIONS CONTAINING THEM"


(31) Priority Document No :04.13682 (32) Priority Date :22/12/2004(33) Name of priority country :France (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)LES LABORATOIRES SERVIER Address of Applicant :12, PLACE DE LA DEFENSE, 92415 COURBEVOIE CEDEX, FRANCE, France 2)CENTRE NATIONAL DE LA RECHERCHE

SCIENTIFIQUE (C.N.R.S.) 3)UNIVERSITE RENE DESCARTES PARIS V (72)Name of Inventor :

1)MICHEL KOCH 2)SYLVIE MICHEL 3)JONH HICKMAN 4)ALAIN PIERRE 5)FRANCIS TILLEQUIN 6)STEPHANE LEONCE 7)BRUNO PFEIFFER 8)LAURENCE KRAUS-BERTHIER

(57) Abstract : Compounds of formula (I): wherein : X and Y each represent a group selected from hydrogen, halogen, alkoxy, nitro, cyano, alkyl, alkenyl, polyhaloalkyl and -NRaRb wherein Ra and Rb are as defined in the description, Z represents an oxygen atom or NRc wherein RC is as defined in the description, Ar represents aryl or heteroaryl, R1 represents a hydrogen atom or an alkyl group, R2 represents a group selected from a hydrogen atom, alkyl, -ORa and -NRaRb wherein Ra and Rb are as defined in the description, R3 and R4 represent a hydrogen atom or an alkyl group, R5 represents a hydrogen atom or a group of formula ORc, NRcRd, W1-C(W2)-U-V, W1-C(W2)-W3-T1 or Z-CO-CH=CHAr wherein RC, Rd, W,, W2, W3, U, V, T, Z and Ar are as defined in the description, their isomers, and also addition salts thereof with a pharmaceutically acceptable acid or base. Medicaments.



(19) INDIA


(54) Title of the invention : "NARROW BAND X-RAY SYSTEM AND FABRICATION METHOD THEREOF"

(51) International classification :G21K (31) Priority Document No :10/452,508 (32) Priority Date :03/06/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/017131 :02/06/2004


:NA :NA


:NA :NA


1)MONOCHROMATIC X-RAY FILTER TECHNOLOGIES,

INC. Address of Applicant :SUITE 225, 7404 EXECUTIVE PLACE, LANHAM, MD 20706, UNITED STATES OF AMERICA. U.S.A. (72)Name of Inventor :

1)CHO, YOUNG MIN 2)HAN, DAESO 3)NA

(57) Abstract : A narrow band x-ray filter can include: a substrate; and a sheaf of one or more reflection units stacked upon each other on the substrate. Each reflection unit can include: a first set of at least two discrete spacers on a respective underlying structures, a reflector disposed on the first set of spacers so as to form a void between the respective underlying structure and the reflector; and a first set of at least two discrete shims disposed on the first set of at least two spacers, each shim being at least substantially the same thickness as the reflector. A first device to produce a narrow band x-ray beam may include such a filter or an x-ray telescope. A second device to make an x-ray image of a subject may include the first device.



(19) INDIA


(54) Title of the invention : "NDMA SCALABLE ARCHIVE HARDWARE/SOFTWARE ARCHITECTURE FOR LOAD BALANCING, INDEPENDENT PROCESSING, AND QUERYING OF RECORDS"

(51) International classification :G06F (31) Priority Document No :60/476,214 (32) Priority Date :04/06/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/017846 :04/06/2004


:NA :NA


:NA :NA


1)THE TRUSTEES OF THE UNIVERSITY OF PENNSYL

VANIA Address of Applicant :3160 CHESTNUT STREET SUITE 200 PHILADELPHIA PENNSYLVANIA, 19104-6283 USA. U.S.A. (72)Name of Inventor :

1)HOLLEBEEK, ROBERT, J.

(57) Abstract : A System for storing NDMA Data is scalable to handle extreme amounts of data. The system allows components to be added or deleted to meet current demands. The system processes data in independent steps, providing processor level independence for every subcomponent. The system uses parallel processing and multithreading within load balancers that direct data traffic to other nodes and within all processes on the nodes themselves. The system utilizes host lists to determine where data should be directed and to determine which functions are activated on each node. Data is stored in queues which are persisted at each processing step.



(19) INDIA


(54) Title of the invention : NDMA SOCKET TRANSPORT PROTOCOL

(51) International classification :G06F (31) Priority Document No :60/475,940 (32) Priority Date :04/06/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/017847 :04/06/2004


:NA :NA


:NA :NA


1)THE TRUSTEES OF UNIVERSITY OF PENNSYLVANIA Address of Applicant :3160 CHESTNUT STREET SUITE 200 PHILADELPHIA PENNSYLVANIA, 19104-6283 USA. U.S.A. (72)Name of Inventor :

1)HOLLEBEEK, ROBERT, J. 2)HAMMITT, FRANK, PAUL

(57) Abstract : Data transferred between DICOM devices located at a hospital or clinic to external storage and retrieval systems are formatted in accordance with a four layer protocol. The first layer includes an NDMA socket protocol. The second layer includes an NDMA header and is nested within the first layer. The third layer includes XML text nested within the second layer, and the fourth layer includes DICOM, or other binary data, that is nested within the third layer. This multi-layered data structure provides DICOM interactions with medical devices within the hospital secure network to be coupled with external communications mechanisms which can acquire or store NDMA content while maintaining the integrity of the hospital/clinic network security and incorporating strong firewall-like protections.



(19) INDIA


(54) Title of the invention : HEALTH SNACK FOOD AND A PROCESS FOR THE PREPARATION THEREOF



:NA :NA


:NA :NA


:NA :NA



DEVELOPMENT ORGANISATION, MINISTRY OF

DEFENCE Address of Applicant :DTE OF ER & IPR, IPR GROUP, ROOM NO. 348, B-WING, DRDO BHAWAN, RAJAJI MARG, NEW DELHI 110011. Delhi India (72)Name of Inventor :

1)PATKI, PRAKASH, EAKANATHRAO 2)PANDIT, SOMSHEKHARAN SRIHAI 3)SHARMA, GOPAL, KUMAR 4)BAWA, AMARINDER, SINGH

(57) Abstract : The invention provides health snack food and a process for the preparation thereof wherein the said process comprises: preparing dough of flour of cleaned minor cereals mixed with flavoring composition such as herein described with water, pressure-cooking the dough so obtained in step (i) to get required rheological properties for extrusion, extruding the pressure-cooked dough, drying the extrusions till moisture level of 30 to 40 %, Cutting and further drying to moisture level of 18- 20% and conditioning in airtight containers for 10 to 12 hrs, Flaking in a conventional manner, drying, optionally toasting, and mixing with seasoning, and packing in barrier container.



(19) INDIA


(54) Title of the invention : A PROCESS FOR READY-TO-EAT SHELF STABLE CHICKEN LEGS

(51) International classification :A23B 4/005


:NA :NA


:NA :NA


:NA :NA



DEVELOPMENT ORGANISATION, MINISTRY OF

DEFENCE Address of Applicant :DTE OF ER & IPR, IPR GROUP, WEST BLOCK-VII, WING-1, FIRST FLOOR, R.K. PURAM, SECTOR-1 NEW DELHI 110066. INDIA. Delhi India (72)Name of Inventor :

1)JAYATHILAKAN KIZHEKKEDATH 2)RADHAKRISHNA KOLPE 3)SHARMA, GOPAL, KUMAR 4)BAWA, AMARINDER, SINGH

(57) Abstract : The indention describes a process for manufacturing of ready to eat chicken legs comprising marinating decontaminated cleaned pieces (chicken legs) with spice mix such as herein described and natural acidulant of pH 3 ± 0.05, cooking the said marinated chicken legs with ascorbic acid ester in combination with Millard Reaction Product (MRP) derived from reacting reducing sugar and amino acid not containing sulfur preferably glucose and lysin, coating the said cooked chicken legs with protective flavoring coating such as herein described under heat treatment at 100 ± 2°C, subjecting to surface dehydration at a temperature between 75 to 80° & packing in barrier packages preferably PFP.



(19) INDIA


(54) Title of the invention : REMOTE MOBILE PHONE CALL/MESSAGE ALERT

(51) International classification :H04Q 7/20


:NA :NA


:NA :NA


:NA :NA


1)MOHD. USMAN Address of Applicant :100, South Khalapar, Muzaffarnagar-251002. Uttar Pradesh India (72)Name of Inventor :

1)MOHD. USMAN

(57) Abstract : Ring tones of a mobile phone handset for incoming calls or messages are not loud enough to pull attention in noisy surrounding and vibration is useful only if mobile phone handset is in touch with the body of the user. So there is a chance of missing incoming calls and messages. Mobile Phone Handsets are at great risk in trains and buses. It is inconvenient to carry more than one Mobile Phone Handsets in pocket. One has to carry his Mobile Phone Handset(s) while in home or at office to minimize the chance of missing an incoming call/message. Someone alerts the user that his Mobile Phone Handset is ringing if he is far away from that. Keeping Mobile Phone Handset(s) close to the body creates health hazards to the user. Effective alerts are not available with existing Mobile Phone Handset to prevent unauthorized dialing if Mobile Phone Handset is not PIN lock protected. Method and devices are provided to get notice of calls/messages in noisy surroundings and for safety of mobile phone handset. Unauthorized use of Mobile Phone Handset may be checked easily. One can get alert of call/messages by keeping mobile phone handset near a base unit, 100, on a remote unit, 200, while handset is in inner pocket or bag.



(19) INDIA


(54) Title of the invention : "NEW CARBOXAMIDE COMPOUNDS HAVING MCH-ANTAGONISTIC ACTIVITY, PHARMACEUTICAL PREPARATIONS COMPRISING THESE COMPOUNDS AND PROCESS FOR THEIR MANUFACTURE"

(51) International classification :C07D 239/80 (31) Priority Document No :102 38 865.2 (32) Priority Date :24/08/2002 (33) Name of priority country :Germany (86) International Application No Filing Date

:PCT/EP2003/009099 :16/08/2003


:NA :NA


:NA :NA


1)BOEHRINGER INGELHEIM PHARMA GMBH & CO.

KG. Address of Applicant :D-55216 INGELHEIM AM RHEIN, GERMANY. Germany (72)Name of Inventor :

1)KIRSTEN ARNDT 2)THORSTEN LEHMANN-LINTZ 3)MARTIN LENTER 4)PHILIPP LUSTENBERGER 5)STEPHAN GEORG MULLER 6)KLAUS RUDOLF 7)DIRK STENKAMP 8)HEIKE-ANDREA WIELAND 9)RALF R. H. LOTZ

(57) Abstract : Carboxamide compounds of general formula I in which the groups and radicals A, B, W, X, Y, Z, R1, R2, R3 and K have the meanings indicated in claim 1. The invention also relates to methods for producing said carboxamide compounds and medicaments containing at least one inventive carboxamide. The inventive medicaments are suitable for treating metabolic disorders and/or eating disorders, especially obesity, bulimia, anorexia, hyperphagia, and diabetes due to the MCH receptor-antagonistic activity thereof.



(19) INDIA


(54) Title of the invention : "PEPTIDES AND/OR PROTEINS AND USE THEREOF FOR THE PRODUCTION OF A THERAPEUTIC AND/OR PROPHYLACTIC MEDICAMENT"

(51) International classification :C07K 14/75 (31) Priority Document No :PCT/AT01/00387 (32) Priority Date :07/12/2001 (33) Name of priority country :PCT (86) International Application No Filing Date

:PCT/AT01/00387 :07/12/2001


:NA :NA


:IN/PCT/00879/DELNP/2003 :05/06/2003


1)FIBREX MEDICAL RESEARCH & DEVELOPMENT

GMBH Address of Applicant :RABENSTEIG 8/3A, A-1010 WIEN, AUSTRIA. Austria (72)Name of Inventor :

1)PETZELBAUER, PETER

(57) Abstract : The invention relates to peptides or proteins of general formula (I) (SEQ ID NO 1, 2) (I), where RI and R2 independently = hydrogen, a saturated or unsaturated hydrocarbon group with 1 to 3, in particular up to 10 carbon atoms, Zi = a histidine or proline group, Z2 = an arginine group, a peptide group or protein group with arginine at the initial terminus, in particular with 2 to 30 amino acids and the salts thereof as well as, for example the amides thereof, or material mixtures thereof and/or with at least one further material. (I) can be used for therapeutic and/or prophylactic applications in human and/or veterinary medicine



(19) INDIA


(54) Title of the invention : "IONTOPHORESIS DEVICE"

(51) International classification :A61N 1/30 (31) Priority Document No :PCT/JP02/04696 (32) Priority Date :15/05/2002 (33) Name of priority country :PCT (86) International Application No Filing Date

:PCT/JP02/04696 :15/05/2002


:NA :NA


:01069/DELNP/2004 :21/04/2004


1)TRANSCUTANEOUS TECHNOLOGIES INC. Address of Applicant :6-10 EBISUMINAMI 1-CHOME, SHIBUYA-KU, TOKYO, JAPAN Japan (72)Name of Inventor :

1)MATSUMURA, AKIHIKO 2)TORISAWA, SAKAE 3)KANAMURA, KIYOSHI 4)ITO, YOSHIHIRO 5)KOBAYSHI, YORIKO

(57) Abstract : An iontophoresis device (X) useful for administering an ionic drug by iontophoresis has an iontophoresis electrode section (1) (active electrode section) and a ground electrode section (2) (inactive electrode section) both of which are to be connected to a power source (3). The iontophoresis device includes elements (members) of both of the electrode sections are all formed of membrane bodies, and includes ion exchange membranes different in ion selectivity, one being selective to ions of the same species as charged ions of the ionic drug and the other to ions different in species from the charged ions of the ionic drug that are arranged in the iontophoresis electrode section, and at least an ion exchange membrane selective to ions opposite to the charged ions of the ionic drug is arranged in the ground electrode section. The iontophoresis device can administer the ionic drug stably over a long period of time at high transport efficiency.



(19) INDIA


(54) Title of the invention : "KAHALALIDE F"

(51) International classification :A61K 38/15 (31) Priority Document No :60/244,471 (32) Priority Date :31/10/2000 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/GB01/04821 :31/10/2001


:NA :NA


:NA :NA


1)PHARMA MAR, S.A. Address of Applicant :CALLE DE LA CALERA, 3, POLIGONO INDUSTRIAL DO TRES CANTOS, TRES CANTOS, E-28760, SPAIN, Spain (72)Name of Inventor :

1)FAIRCLOTH, GLYNN, THOMAS 2)NUYEN, BASTIAN 3)WEITMAN, STEVE

(57) Abstract : The present invention relates to kahalalide F, a peptide isolated from a herbivorous marine species of mollusc, Elysia rufescens.



(19) INDIA


(54) Title of the invention : "NOVEL COMPOUNDS AND THEIR USE IN THERAPY"


:PCT/EP2004/006230 :09/06/2004


:NA :NA


:NA :NA


1)SOLVAY PHARMACEUTICALS B.V. Address of Applicant :C.J. VAN HOUTENLAAN 36, NL-1381 CP WEESP, NETHERLANDS. Netherlands (72)Name of Inventor :

1)LEENA HIRVELA 2)NINA JOHANSSON 3)PASI KOSKIMIES 4)OLLI TANELI PENTIKAINEN 5)TOMMI NYRONEN 6)TIINA ANNAMARIA SALMINEN 7)MARK STUART JOHNSON 8)PEKKA LETHOVUORI

(57) Abstract : This invention relates to novel thiophenepyrimidinone derivatives and their use in therapy, especially for use in the treatment and/or prevention of a steroid hormone dependent diseases or disorder, such as steroid hormone dependent diseases or disorders requiring inhibition of 17-βhydroxysteroid dehydrogenase enzymes.



(19) INDIA


(54) Title of the invention : "METHODS AND COMPOSITIONS FOR AMINO ACID PRODUCTION"

(51) International classification :C12N (31) Priority Document No :60/475,000 (32) Priority Date :30/05/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/017513 :01/06/2004


:NA :NA


:NA :NA


1)MICOIBIA, INC. Address of Applicant :320 BENT STREET, CAMBRIDGE, MASSACHUSETTS 02141, U.S.A. U.S.A. (72)Name of Inventor :

1)RICHARD B. BAILEY 2)PAUL BLOMQUIST 3)REED DONTEN 4)EDWARD M. DRIGGERS 5)KEVIN T. MADDEN, 6)JESSICA O'LEARY 7)GEORGE A. O'TOOLE, 8)JOSHUA TRUEHEART, 9)MICHAEL J. WALBRIDGE, 10)PETER S. YORGEY

(57) Abstract : The present invention relates to compositions and methods for production of amino acids and related metabolites in bacteria.



(19) INDIA


(54) Title of the invention : "RATIONAL INQUIRY METHOD"


:PCT/US00/40818 :05/09/2000


:NA :NA


:00308/DELNP/2003:06/03/2003


1)FIRST PRINCIPLES INC. Address of Applicant :7 GRANT HILL ROAD, CLIFTON PARK, NEW YORK, 12065,USA U.S.A. (72)Name of Inventor :

1)RANIERE.,KEITH

(57) Abstract : The present invention relates generally to a method for personal and group improvement. Rational inquiry (10) includes a plurality of questions, methods and observations leading to answers, meanings, ethics, personal essence, purpose and a greater awareness. The questions and observations in the method are provided to the individual in a matrix or a plurality of modules, including practices and inquiries. The matrix or modules, including practices and inquiries are used to assists the individual in determining a minimally assumptive matrix of consistent human internal existence and determining a minimally assumptive matrix of consistent reality. If through comparison of the minimally assumptive matrices, a difference is detected, a disintegration is said to occur. The disintegration is removed by allowing the individual to integrate through a more complete awareness of a limiting belief.



(19) INDIA


(54) Title of the invention : "DISTILLATION METHODS AND DEVICES IN PARTICULAR FOR PRODUCING FRESH WATER"

(51) International classification :C02F 1/14 (31) Priority Document No :03/06838 (32) Priority Date :06/06/2003 (33) Name of priority country :France (86) International Application No Filing Date

:PCT/FR2004/001373 :03/06/2004


:NA :NA


:NA :NA


1)THE THIRD MILLENIUM WATER COMPANY Address of Applicant :136, BOULEVARD HAUSSMANN, 75008 PARIS, FRANCE. France (72)Name of Inventor :

1)JEAN-PAUL DOMEN 2)STEPHANE VIANNAY

(57) Abstract :The inventive device is embodied in the form of a chamber-oven for diffusing vapour and saturated hot air which circulate in a closed circuit by natural convection. Said device is embodied in the form of a domestic-use solar energy collecting device provided with a greenhouse whose surface is equal to 1 m2 and produces from 50 to 100 litres/day of distilled water. The device comprises a distillation unit arranged between two furnaces (59', 79) in a temperature-controlled container (48). Said distillation unit comprises 100 flat thin hollow plates having a surface of 20 dm2 by face and an active volume of 200 dm3. The fine and tensioned walls (54) of said plates are provided with a hydrophilic coating (60) and internal (56") and inter-plate (58") spaces. The lower chimney (59) comprises a greenhouse (US', 119') whose bottom is embodied in the form of an impermeable black layer provided with a thin hydrophilic carpet on the rear part thereof. Saturated hot air at a temperature of 80 °C enters inside (56) hollow plates from bellow and exits from the top at a temperature of 50 "C. A high chimney (79") is provided with a monoblock heat exchanger (84) which is transversed by a non-potable water to be distilled which, afterwards is spread warm (40°C) over the hydrophilic coating (60). During passage through the heat exchanger (84) the air is cooled to 30°C and moved down by gravity to the inter-plate spaces (58) and exits therefrom at a temperature of 78 °C. The distilled water condensed in the plates and by the heat exchanger is collected and removed. Brine is received in the bottom of the inter-plate space and distributed along the thin hydrophilic carpet of the bottom (122) of the greenhouse. An air current passes along said hot carpet is heated and saturated and enters the plates. The brine liquor finally flows in an air preheating tank (63) which is emptied each morning. The greenhouse can be substituted by a heating tube transversed by a heating fluid or associated with another steam-jet tube. The more powerful chamber-ovens can produce at least 200 m3/day of distilled water for collective consumption. Said invention can be used for salt removal from seawater, co generating electricity and potable water and for producing food concentrates.



(19) INDIA


(54) Title of the invention : "7-(1, 3-THIAZOL-2-YL) THIO!-COUMARIN DERIVATIVES AND THEIR USE AS LEUKOTRIENE BIOSYNTHESIS INHIBITORS"

(51) International classification :C07D 417/12 (31) Priority Document No :60/477,854 (32) Priority Date :11/06/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/CA2004/000861 :08/06/2004


:NA :NA


:NA :NA


1)MERCK FROSST CANADA LTD. Address of Applicant :16711 TRANS-CANADA HIGHWAY, KIRKLAND, QUEBEC H9H 3L1, CANADA. Canada (72)Name of Inventor :

1)GAREAU, YVES 2)JUTEAU, HELENE 3)MACKAY, BRUCE, D. 4)FRIESEN, RICHARD 5)GRIMM, ERICH L. 6)BLOUIN, MARC 7)LALIBERTE, SEBASTIEN

(57) Abstract : The instant invention provides compounds of Formula (I) which are leukotriene biosynthesis inhibitors. Compounds of formula (I) are useful as anti-asthmatic, anti-allergic, anti-inflammatory, cytoprotective and anti-artherosclerotic agents.



(19) INDIA


(54) Title of the invention : ORIENTED STRAND BOARDS




:PCT/NL2004/000456 :28/06/2004


:NA :NA


:NA :NA


1)DSM IP ASSETS B.V. Address of Applicant :HET OVERLOON 1, NL-6411 TE HEERLEN, THE NETHERLANDA Netherlands 2)DYNEA OY (72)Name of Inventor :

1)EVERS, LARS 2)VAN BENTHEM, RUDOLFUS ANTONIUS THEODORUS 3)MATTHEIJ, JOZEF MARIA JOHANNES 4)GOMEZ BUESO, JOSE GUADALUPE 5)VERMEULEN, JACOBUS ADRIAAN ANTONIUS

(57) Abstract : Oriented strand board (OSB), comprising a core layer and two face layers, whereby the face layers comprise an adhesive composition, wherein the adhesive composition in at least one of the face layers comprises a resin composition comprising melamine, formaldehyde, optionally urea and aromatic hydroxyl compounds, wherein the molar ratio of melamine to formaldehyde is 1:0.8-4.0, the molar ratio of melamine to urea is 1:0-2.0 and the molar ratio of melamine to aromatic hydroxyl compounds is 1:0-2.0. In a preferred embodiment, both the face layers and the core layer comprise the said adhesive composition. The OSB's according to the invention can meet the OSB/3 and even the OSB/4 requirements in the EN 300 standards.



(19) INDIA


(54) Title of the invention : "INSERTION TOOL FOR OCULAR IMPLANT AND METHOD FOR USING SAME"

(51) International classification :A61F 9/00 (31) Priority Document No :10/443,752 (32) Priority Date :23/05/2003 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2004/016223 :21/05/2004


:NA :NA


:NA :NA


1)BECTON, DICKINSON AND COMPANY Address of Applicant :1 BECTON DRIVE FRANKLIN LAKES NJ 07417-1880, U.S.A. U.S.A. (72)Name of Inventor :

1)TAYLOR, JON, B. 2)LEE, EDWIN, G. 3)MULHERN, MARGARET, B. 4)MORRIL, TIMOTHY, J. 5)COTE, DANA, M.

(57) Abstract : An insertion tool containing an electrometric band, ejection pin and cartridge assembly for holding a transcornea shunt during insertion procedures. The proximal flange of the shunt is gently held in a visible position within an adjustable opening in the electrometric band at the distal end of the ejection pin. A slide mechanism is provided along the exterior surface of the insertion tool to drive the cartridge assembly which applies tension to the electrometric band, increasing the opening diameter securing the shunt and allowing gentle release of the shunt when desired. Alternative embodiments of the insertion tool utilize severable fibers, a transparent split-mylar sheet or diaphragm, a cantilever fork, a collect assembly or an electrometric grip collect to gently hold and release the shunt during insertion.



(19) INDIA


(54) Title of the invention : "NEW AZETIDINE COMPOUNDS"

(51) International classification :A61K 31/00 (31) Priority Document No :0301744-0 (32) Priority Date :13/06/2003 (33) Name of priority country :Sweden (86) International Application No Filing Date

:PCT/SE2004/000901 :09/06/2004


:NA :NA


:NA :NA


1)ASTRAZENECA AB Address of Applicant :S-151 85 SODERTALJE, SWEDEN. Sweden (72)Name of Inventor :

1)ANDERS JOHANSSON 2)JOACHIM PERSSON

(57) Abstract : The present invention relates to a compound of the general formula (I) wherein Het is an optionally substituted 4-, 5-, 6- or 7-membered helerocyclic ring having at least one nitrogen atom; R1 is hydrogen, hydroxy, C1-C4 alkyl, C3-C4 cycloalkyl, C2-C4 alkenyl or C2-C4 alkynyl; R2 and R3 is each and independently selected from hydrogen, C1-C4 alkyl, C3-C4 cycloalkyl, C2-C4 alkenyl, C2-C4 alkynyl, C1-C4 alkoxy, halogen and cyano, provided that R2 and R3 may not both be hydrogen; R4 is C1-C4 alkyl, C3-C4 cycloalkyl, C2-C4 alkenyl or C2-C4 alkynyl; Ar is an optionally substituted aromatic ring system selected from pyridinyl; 1-naphthyl; 5,6,7,8-tetrahydro-l-naphthyl; quinolinyl; 2,3-dihydro-l,4-benzodioxinyl; 1,3-benzodioxolyl; 5,6,7,8-tetrahydroquinolinyl; 5,6,7,8-tetrahydroisoquinolinyl; 5,6,7,8-tetrahydroquinazolin-4-yI; l-benzofb]thiophen-7-yl; l-benzo[b]thiophen-4-yl; l-benzo[b]thiophen-3-yl; isoquinolinyl; quinazolinyl; and indan-4-yl; or Ar is substituted phenyl; or an enantiomer thereof or any salt thereof; to a pharmaceutical composition containing said compounds and to the use of said compounds in therapy. The present invention further relates to processes for the preparation of compounds of formula I and to new intermediates used in the preparation thereof.



(19) INDIA


(54) Title of the invention : "PEAK REDUCTION FOR SIMULCAST BROADCAST SIGNALS"


(31) Priority Document No :02 010 672.0

(32) Priority Date :13/05/2002(33) Name of priority country :EPO (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SONY INTERNATIONAL (EUROPE) GMBH Address of Applicant :KEMPERPLATZ 1, 10785 BERLIN, GERMANY. Germany (72)Name of Inventor :

1)JENS WILDHAGEN 2)DIETMAR SCHILL

(57) Abstract : A reduced peak simulcast signal generator and a method for generating a stable peak-attenuated simulcast signal, which combines a digital broadcast signal and an analogue broadcast signal, are described. The simulcast signal generator comprises at least one attenuation stage for attenuating the digital and/or the analogue broadcast signal in order to obtain a stable simulcast signal. Each attenuation stage comprises a simulcast signal generator for generating an error signal, and attenuation means which attenuate, in dependence of said first error signal, at least one of the analogue and the digital broadcast signal.



(19) INDIA


(54) Title of the invention : ARRANGEMENT OF LIGHT-EMITTING DIODES OF LED LAMP

(51) International classification :F21V11/00; F21V11/00

(31) Priority Document No :095211388 (32) Priority Date :29/06/2006



:NA :NA


:NA :NA


:NA :NA


1)AUGUX CO.,LTD Address of Applicant :1F.-9,NO.40-2,SEC.1,MINSHENG N. RD.,GUEISHAN TOWNSHIP, TAOYUAN COUNTY 333,TAIWAN Taiwan (72)Name of Inventor :

1)WANG PEI-CHOA

(57) Abstract : An improved arrangement of light-emitting diodes of a LED Lamp includes a circuit board and a plurality of light-emitting diodes. The surface of the circuit board is provided with a layer of conductive circuit, so that the light-emitting diodes can be arranged on the circuit board and electrically connected to the conductive circuit. On the surface of the circuit board provided with the conductive circuit, an imaginary circle is defined. Further, the light-emitting diodes are distributed on the circuit board along the imaginary circle to form a circular arrangement.



(19) INDIA


(54) Title of the invention : "TRIHETEROCYCLIC COMPOUNDS COMPOSITIONS, AND METHODS FOR TREATING CANCER OR VIRAL DISEASES"


:PCT/CA2004/000793 :28/05/2004


:NA :NA


:NA :NA


1)GEMIN X BIOTECHNOLOGIES INC. Address of Applicant :P.O. BOX 477, PLACE DU PARC, MONTREAL, QUEBEC H7K 3M5, CANADA. Canada (72)Name of Inventor :

1)GIORGIO ATTARDO 2)KENZA DAIRI 3)JEAN-FRANCOIS LAVALLEE 4)ELISE RIOUX 5)SASMITA TRIPATHY 6)XAVIER BILLOT 7)TERRANCE W. DOYLE

(57) Abstract : The present invention relates to novel Triheterocyclic Compounds, formula (I): and pharmaceu-tically acceptable salts thereof, where in: Qt is -O-, -S- or -N(R,)-; Q2 is -C(R3)- or -N-; Q.s is -C (R5)- or -N-; Q4 is -C (R9)- or -N-; compositions comprising a Triheterocyclic Compound, and methods useful for treating or preventing cancer or a neoplastic disorder comprising adminislering a Triheterocyclic Compound. The compounds, compositions, and methods of the invention are also useful for inhibiting the growth of a cancer cell or neoplastic cell, treating or preventing a viral infection, or inhibiting the replication and/or infectivity of a virus.



(19) INDIA


(54) Title of the invention : A METHOD AND AN APPARATUS FOR ELIMINATING THE NARROW-BAND INTERFERENCE IN THE SPREAD SPECTRUM SYSTEM

(51) International classification :H04J 13/02 (31) Priority Document No :200510033912.X (32) Priority Date :29/03/2005 (33) Name of priority country :China (86) International Application No Filing Date

:PCT/CN2005/002008 :25/11/2005


:NA :NA


:NA :NA


1)ZTE CORPORATION Address of Applicant :ZTE PLAZA, KEJI ROAD SOUTH, HI-TECH INDUSTRIAL PARK, NANSHAN DISTRICT, SHENZHEN CITY, GUANGDONG PROVINCE 518057 P.R.CHINA China (72)Name of Inventor :

1)ZHAO, MENG 2)YU, GUANGHUI 3)WU, YANWEI 4)HU, LIUJUN 5)XIANG, JIYING 6)WANG, ZHIJIAN

(57) Abstract : A method and an apparatus for eliminating the narrow-band interference in the spread spectrum system, comprises the following steps of: during the accumulated period of time, extracting N points one by one from the sampling digital signal to perform the spectrum transformation; at the same time updating the information and eliminating the interference; while updating information, calculating the accumulated energy value of the data of the N points after spectrum transformation during the accumulated period of time, and obtaining a threshold value thereby, then recording the identification information for points(out of N) with accumulated energy value greater than the threshold value; when processing interference elimination, searching for the points corresponding to the N output data after each spectrum transformation in the current period of time according to the point identification information recorded in the previous period of time, reducing the data energy of these points to the level below the noise, then performing inverse spectrum transformation of the data and outputting it. The corresponding apparatus comprises a spectrum transformation unit, an interference elimination control unit, an interference elimination unit and an inverse spectrum transformation unit. The present invention can greatly decrease the calculation and the hardware need for real-time processing.



(19) INDIA


(54) Title of the invention : "A PROCESS FOR PREPARATION OF EPOXY-MODIFIED PHENOL-FURFURAL RESIN"

(51) International classification :C08G 8/00


:NA :NA


:NA :NA


:NA :NA


1)THE CHIEF CONTROLLER, RESEARCH AND

DEVELOPMENT Address of Applicant :MINISTRY OF DEFENCE, GOVERNMENT OF INDIA, NEW DLEHI, INDIA. Delhi India (72)Name of Inventor :

1)BABU LAL 2)LAXMI DATT KANDPAL

(57) Abstract : "A process for preparation of an epoxy-modified phenol-furfural resin and composites thereof. This invention relates to a process for preparation of an epoxy-modified phenol-furfural resin wherein phenol-furfural resin is prepared by condensation polymerization of phenol with furfural at a temperature of for example 140°C in presence of anhydrous potassium carbonate as condensation catalyst to obtain phenol-furfural resin wherein the mole ratio of phenol to furfural is 1.4:1.04, blending of powder phenol-furfural resin dissolved in ethyl alcohol with epoxy-resin dissolved in a solvent which is methyl ethyl acetone taken in a ratio of 80:20 with a variation of 3-5% to obtain Epoxy modified phenol-furfural resin.



(19) INDIA


(54) Title of the invention : "METHOD FOR SECURING A URINE METER TO A URINE BAG"

(51) International classification :G01F22/00 (31) Priority Document No :11/478,749 (32) Priority Date :30/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)TYCO HEALTHCARE GROUP LP Address of Applicant :15 HAMPSHIRE STREET MANSFIELD, 02048, USA U.S.A. (72)Name of Inventor :

1)LAWRENCE SALVADORI 2)DENNIS SCHREUER

(57) Abstract : A method is disclosed for securing a fluid meter to a fluid collection bag. The method includes the steps of providing a meter having a housing defining a fluid receptacle and at least one drain opening, providing a collection bag defining a fluid reservoir and having at least one inlet opening and securing the meter to the bag using an RF welding device to allow fluid communication between the fluid receptacle and the fluid reservoir. In one embodiment, the housing includes a raised surface positioned about the at least one drain opening to which the collection bag is welded.



(19) INDIA


(54) Title of the invention : "DOSAGE FROM"

(51) International classification :AK61K 9/50 (31) Priority Document No :0315019.0 (32) Priority Date :27/06/2003 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/GB2004/002775 :28/06/2004


:NA :NA


:NA :NA


1)UNVERSITY OF HULL Address of Applicant :COTTINGHAM ROAD, HULL, HU6 7RX, GREAT BRITIAN. U.K. (72)Name of Inventor :

1)ATKIN, STEPHEN, LAWRENCE 2)BECKETT, STEPHEN, THOMAS 3)MACKENZIE, GRAHAME

(57) Abstract : A pharmaceutical or dietetic dosage form comprising of effective quantity of an active substance chemically or physically bound to a support comprising, sporopollenin, or other similar exine coating of spores, of a plant of fungus, optionally with further excipients.



(19) INDIA


(54) Title of the invention : "PREDICTING A FUTURE PRICE RANGE FOR A DESIRED VOLUME"


:PCT/US2004/018809 :14/06/2004


:NA :NA


:NA :NA


1)FMR CORP Address of Applicant :82 DEVONSHIRE STREET, BOSTON, MASSACHUSETTS 02109, USA. U.S.A. (72)Name of Inventor :

1)ANI CHITALEY 2)ANTHONY DELISLE 3)ARUN S. GORUR

(57) Abstract : The present invention provides methods and apparatus, including computer program products, to predict a future price range for a desired volume of a traded item. This includes determining a price range based on a set of historical transactions having a comparison volume corresponding to the desired volume of the traded item. It may also include selecting transactions from historical transaction data to generate the set of historical transactions. It may also include selecting historical transactions such that the set of historical transactions has a total volume substantially equal to the comparison volume. It may also include selecting historical transactions such that the set of historical transactions has a total volume greater than the comparison volume and selectively removing one or more historical transactions from the set of historical transactions until the set of historical transactions has a total volume substantially equal to the comparison volume.



(19) INDIA


(54) Title of the invention : "BACTERIAL CELLULOSE-CONTAINING FORMULATIONS AND METHOD OF PRODUCING EFFECTIVE BACTERIAL CELLULOSE-CONTAINING FORMULATIONS"


:PCT/US2006/020080 :23/05/2006


:NA :NA


:NA :NA


1)YANG ZHIFA Address of Applicant :8255 AERO DRIVE, SAN DIEGO, CA 92123-1718, U.S.A. U.S.A. (72)Name of Inventor :

1)YANG ZHIFA

(57) Abstract : New formulations of bacterial cellulose and a new method "to 'produce formulations of bacterial cellulose that exhibit improved viscosity-modifying properties particularly with low energy applied to effectuate viscosity changes therewith is provided. Such a method includes the novel co-precipitation with a water soluble co-agent that permits precipitation in the presence of excess alcohol to form an insoluble fiber that can than be utilized as a thickener or suspension aid without the need to introduce high energy mixing. Such bacterial cellulose properties have been available in the past but only through highly labor and energy intensive processes. Such an inventive method as now proposed thus provides a bacterial cellulose-containing formulation that exhibits not only properties that are as effective as those for previous bacterial celluloses, but, in some ways, improvements to such previous types. Certain end-use compositions and applications including these novel bacterial cellulose-containing formulations are also encompassed within this invention.



(19) INDIA


(54) Title of the invention : DISPENSER

(51) International classification :B65D 47/34 (31) Priority Document No :10-2005-0044823 (32) Priority Date :27/05/2005 (33) Name of priority country :Republic of Korea (86) International Application No Filing Date

:PCT/KR2005/001772 :10/06/2005


:NA :NA


:NA :NA


1)KIM, YONG-SOO Address of Applicant :134-27, MOCHOONG-DONG, HEUNGDEOK-GU, CHEONGJU-CITY 360-140, KOREA. Republic of Korea (72)Name of Inventor :

1)KIM, YONG-SOO

(57) Abstract : Disclosed is a dispenser capable of smoothly spraying content material in the form of fine mist with the aid of air pressure alone or in combination with a self-contraction characteristic. The dispenser includes a single-use dispenser dispensing content material using air pressure, and a reusable dispenser dispensing content material using air pressure and a self-contraction characteristic. The single -use dispenser includes a first type single-use dispenser and a second-type single -use dispenser. The first type single-use dispenser comprises a vessel filled with content material and air pressure, a valve installed on the top of the vessel, and a push button for pushing the valve. The first type single -use dispenser further has an air suction hole in one side of the valve for applying supplementary air pressure to the inside of the valve, so that the content material can be sprayed in the form of a fine mist. The second type single-use dispenser comprises a vessel filled with content material and air pressure, a valve installed to the top of the vessel and a push button for pushing the valve. This second type single-use dispenser further comprises an auxiliary valve installed near the valve, thereby guiding air pressure in the vessel to the push button in order to supplement air pressure of the valve, so that the content material can be sprayed in the form of a fine mist. The dispenser using air pressure and a self-contraction characteristic comprises an outer vessel, an inner vessel installed in the outer vessel and having a self-contraction characteristic, a valve for discharging content material in the inner vessel, a push button for pushing the valve, and an auxiliary valve installed near the valve in order to applying supplemental air pressure to the push button.



(19) INDIA


(54) Title of the invention : METHOD FOR GENERATING AND MANAGING A LOCAL AREA NETWORK

(51) International classification :H04L 29/06 (31) Priority Document No :01233/03 (32) Priority Date :14/07/2003 (33) Name of priority country :Switzerland (86) International Application No Filing Date

:PCT/IB/2004/051130 :06/07/2004


:NA :NA


:NA :NA


1)NAGRAVISION SA Address of Applicant :ROUTE DE GENEVE 22, CH-1033 CHESEAUX-SUR-LAUSANNE, SWIZTERLAND. Switzerland (72)Name of Inventor :

1)GUY MOREILLON

(57) Abstract : The present invention relates to a method for creating and managing a local area network including at least one device for reproducing an encrypted data flow and a device for transmitting and re-encrypting all or part of said encrypted data, which devices include security modules. The method includes the steps of connecting a so-called master security module in one of the devices connected to the local area network, causing the master security module to generate a network key, securely transmitting the network key to one or more so-called user security modules, decrypting the data encrypted by the transmission and re-encryption device, re-encrypting the data with said device by means of a local key, transmitting the re-encrypted data to the reproduction device, and holding the reproduction device to perform decryption using the user security module associated therewith and provided with means for locating the local key.



(19) INDIA


(54) Title of the invention : NOVEL MCHR1 ANTAGONISTS AND THEIR USE FOR THE TRETMENT OF MCHR1 MEDIATED CONDITIONS AND DISORDERS


:PCT/SE2006/000621 :29/05/2006


:NA :NA


:NA :NA


1)ASTRAZENECA AB Address of Applicant :SE-151 85 SODERTALIJE, SWEDEN Sweden (72)Name of Inventor :

1)DEAN BROWN 2)WILLIAM BLACKWELL 3)FRANCES M. MCLAREN 4)VOLKER SCHNECKE 5)REED W. SMITH 6)GARY STEELMAN 7)XIA WANG 8)REBECCA A. URBANEK 9)STEWEN WESOLOWSKI

(57) Abstract : Compounds of Formula I wherein R1, D, R2, A and R3 are as described in the specification, pharmaceutically-acceptable salts, methods of making, pharmaceutical compositions containing and methods for using the same.



(19) INDIA


(54) Title of the invention : "FULL POINT WIDTH CUTTING BLADES"

(51) International classification :B23F 21/22 (31) Priority Document No :11/167,502 (32) Priority Date :27/06/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/024667 :23/06/2006


:NA :NA


:NA :NA


1)THE GLEASON WORKS Address of Applicant :1000 UNIVERSITY AVENUE, P.O.BOX 22970, ROCHESTER, NY 14692-2970, USA U.S.A. (72)Name of Inventor :

1)REINHARDT RITTER 2)UWE GAISER 3)EARL D.ERVAY

(57) Abstract : A cutting blade (60; 70) for face milling wherein the cutting blade is constructed to cut a predetermined final dimension of a tooth slot (2) along a portion of the cutting end (i.e. the primary cutting edge portion) of the blade (62, 64, 66; 72, 74, 76) and to cut the remainder of the tooth slot at an amount less that the predetermined final dimension of the tooth slot along the remaining portion (i.e. the secondary cutting edge portion) of the cutting end (68, 69; 78, 79). The construction of the inventive cutting blade provides sharing of the cutting load amongst the blade cutting edges and also provides sufficient clearance (67; 77) in the tooth slot whereby the cutting blade can be repositioned to allow truing of the cutter, particularly with respect to the primary portion.



(19) INDIA


(54) Title of the invention : "HIGH COLOUR DIAMOND"

(51) International classification :C23C 16/27 (31) Priority Document No :0512728.7 (32) Priority Date :22/06/2005 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/IB2006/001694 :22/06/2006


:NA :NA


:NA :NA


1)ELEMENT SIX LIMITED Address of Applicant :ISLE OF MAN FREEPORT, BALLASALLA ISLE OF MAN IM99 6AQ, ENGLAND. U.K. (72)Name of Inventor :

1)STEPHEN DAVID WILLIAMS 2)DANIEL JAMES TWITCHEN 3)PHILIP MAURICE MARTINEAU 4)GEOFFREY ALAN SCARSBROOK 5)IAN FRIEL

(57) Abstract : A method of producing a CVD diamond layer having a high colour, which is suitable for optical applications, for example. The method includes adding a gaseous source comprising a second impurity atom type to counter the detrimental effect on colour caused by the presence in the CVD synthesis atmosphere of a first impurity atom type. The described method applies to the production of both single crystal diamond and polycrystalline diamond.



(19) INDIA


(54) Title of the invention : "A TAMPON"

(51) International classification :A61F 13/20 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:PCT/SE2005/001024 :28/06/2005


:NA :NA


:NA :NA


1)SCA HYGIENE PRODUCTS AB Address of Applicant :S-405 03 GOTEBORG, SWEDEN Sweden (72)Name of Inventor :

1)STEVE MATHEWS

(57) Abstract : A tampon (101) having an insertion end (105) and a withdrawal end (106), and a withdrawal string (104) extending from the withdrawal end (106), said tampon (101) comprising a fibrous absorbent tampon body (102) comprising multi-limbed viscose fibers, said tampon body (102) comprising an inner core (108) and an outer absorbent structure (109) surrounding said inner core (108), said inner core (108) being more dense than said outer absorbent structure (109). The inner core (108) is made of a fibrous blend comprising 0 - 25% by weight of multilimbed viscose fibers and the outer absorbent structure (109) is made of a fibrous blend comprising 30 -100% by weight of multilimbed viscose fibers.



(19) INDIA


(54) Title of the invention : "ELECTRICAL ENERGY METER HAVING A MICROPROCESSOR CONTROLLED CONSUMPTION SYSTEM"

(51) International classification :G01R 21/133


:NA :NA


:NA :NA


:NA :NA


1)AVISTA LABORATORIES, INC. Address of Applicant :15913 E. EUCLID AVENUE, SPOKANE, WASHINGTON 99216, U.S.A. U.S.A. (72)Name of Inventor :

1)MAJUMDAR, SUPRIO

(57) Abstract : A prepayment electronic energy meter and method for operating the same is provided. Disclosed is an energy controller (120) coupled to a microprocessor-based communication card (140). The microprocessor-based communication card (140) comprises encrypted instructions, encrypted with a special recognition code and the digital encryption of units purchased to be controlled. When inserted in the communication card housing (280), the energy controller (120) follows the instructions as encrypted on the communication card (140) and permits the passage of only a pre-determined quantity of energy units to the metering device (130).



(19) INDIA


(54) Title of the invention : HIGH-LEVEL EXPRESSION OF RECOMBINANT ANTIBODY IN A MAMMALIAN HOST CELL

(51) International classification :C07K 16/00 (31) Priority Document No :0510277.7 (32) Priority Date :20/05/2005 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/EP2006/004767 :19/05/2006


:NA :NA


:NA :NA


1)LONZA BIOLOGICS PLC. Address of Applicant :228-230 BATH ROAD, SLOUGH SL1 4DY (GB) U.K. (72)Name of Inventor :

1)RANCE, JAMES 2)KALWY, STEPHAN 3)YOUNG, ROBERT 4)GAY, ROBERT

(57) Abstract : The invention relates to a mammalian host cell with a high-level expression of recombinant antibody containing a double-gene vector with gene optimized nucleotide sequences encoding the light and the heavy antibody chains, the double-gene vector itself and a process for enhancing the production of recombinant antibody in a mammalian host cell.



(19) INDIA


(54) Title of the invention : MULTIPLY SUBSTITUTED FERROCENES

(51) International classification :C07F 17/02 (31) Priority Document No :0748/05 (32) Priority Date :28/04/2005 (33) Name of priority country :Switzerland (86) International Application No Filing Date

:PCT/EP2006/061861 :27/04/2006


:NA :NA


:NA :NA


1)SOLVIAS AG Address of Applicant :klybeckstrasse 191, 4057 basel, switzerland. Switzerland (72)Name of Inventor :

1)BENOIT PUGIN 2)XIANGDONG FENG

(57) Abstract : Compounds of the formula I or II in the form of an enantiomerically pure diastereomer or a mixture of diastereomers, (Formula I & II Removed) where R'1 is C1-C4-alkyl and n is 0 or an integer from 1 to 5; R1 is a hydrogen atom, a hydrocarbon radical having from 1 to 20 carbon atoms, sec-phosphino, a mercaptan radical having from 1 to 20 carbon atoms in the hydrocarbon radical or a silyl radical having 3 C1-C12-hydrocarbon radicals; R2 is the monovalent radical of an electrophilic organic compound; X1 is F, Cl, Br or I; and Y is a C-, S- or P-bonded chiral group which directs metals of metallating reagents into the ortho position X1 are coordinating ligands for complexes of transition metals as homogeneous catalysts for coupling reactions and intermediates for preparing chelating ligands.



(19) INDIA


(54) Title of the invention : "A COMPOSITION, ITS PREPARATION METHOD AND ITS USE"


:PCT/CN2006/000895 :30/04/2006


:NA :NA


:NA :NA


1)NATIONAL YANG-MING UNIVERSITY Address of Applicant :NO. 155, SEC 2, LINUNG ST., BEITOU CHIU, TAIPEI, TAIWAN, CHINA. China (72)Name of Inventor :

1)RONG-TSUN WU,

(57) Abstract : A composition contains a polysaccharide from Dendrobium. It is used for treating autoimmune diseases and mucosal diseases by inducing oral tolerance and accelerating innate immmunity.



(19) INDIA


(54) Title of the invention : "NEW SUBSTITUTED GLYCINAMIDES HAVING AN ANTITHROMBOTIC AND FACTOR XA- INHIBITING EFFECT"




:PCT/EP2006/063611 :28/06/2006


:NA :NA


:NA :NA


1)BOEHRINGER INGELHEIM INGERNATIONAL GMBH Address of Applicant :BINGER STRASSE 173, 55216 INGELHEIM, GERMANY, Germany (72)Name of Inventor :

1)HENNING PRIEPKE 2)GEORG DAHMANN 3)KAI GERLACH 4)ROLAND PFAU 5)WOLFGANG WIENEN 6)ANNETTE SCHULER-METZ 7)SANDRA HANDSCHUH 8)HERBERT NAR

(57) Abstract : The invention relates to novel substituted glycinamides of general formula (I), wherein D, M, R3 , R4 , and R5 are defined as indicated in the description, the tautomers, enantiomers, diastereomers, mixtures, and salts thereof, especially the physiologically acceptable salts thereof with inorganic or organic acids or bases, which are provided with valuable characteristics.



(19) INDIA


(54) Title of the invention : "PHENYLALKYL SUBSTITUTED HETEROARYL DERIVATIVES"


:PCT/US2006/020049 :24/05/2006


:NA :NA


:NA :NA


1)BAYER CROPSCIENCE AG, Address of Applicant :ALFRED-NOBEL-STRASSE 50, 40789 MONHEIM, GERMANY Germany (72)Name of Inventor :

1)JOHN W. LYGA, 2)FRAK ZAWACKI, 3)LARRY Y. ZHANG, 4)NA

(57) Abstract : Certain novel phenylalkyl substituted azole derivatives have unexpected insecticidal activity. These compounds are represented by formula I: where A, B, D, E, G, a, b, c, d, and R through R , inclusively, are folly described herein. In addition, compositions comprising an insecticidally effective amount of at least one compound of formula I, and optionally, an effective amount of at least one of a second compound, with at least one insecticidally compatible carrier are also disclosed; along with methods of controlling insects comprising applying said compositions to a locus where insects are present or are expected to be present



(19) INDIA


(54) Title of the invention : INTERFACE INJECTOR DEVICE FOR THE DIRECT COUPLING OF LIQUID CHROMATOGRAPHY AND GAS CHROMATOGRAPHY

(51) International classification :G01N 30/46 (31) Priority Document No :P200501284 (32) Priority Date :20/05/2005 (33) Name of priority country :Spain (86) International Application No Filing Date

:PCT/ES2006/000154 :30/03/2006


:NA :NA


:NA :NA


1)UNIVERSIDAD DE CASTILLA-LA MANCHA Address of Applicant :PLAZA DE LA UNIVERSIDAD NÂ° 2, E-02071 ALBACETE, SPAIN. Spain (72)Name of Inventor :

1)VAZQUEZ MOLINI, ANA, MARIA 2)VILLEN ALTAMIRANO, JESUS 3)SANCHEZ SANTIAGO, RAQUEL 4)GIBERT FORTUNY, ROGER

(57) Abstract : The invention relates to an interphase injector device for the direct coupling of liquid chromatography and gas chromatography. The inventive device consists of: an outer body (1) comprising an inner cavity with two internal chambers (2a, 2b) which are separated by a divider element (9, 11 a); a first passage (3) which extends from the first chamber (2a) to a waste product conduit (8); and an inner tube (5) which is disposed in the inner cavity and which extends through the divider element (9, 11 a). The aforementioned inner tube is equipped with: a first segment (5a) in the first inner chamber (2a); a second segment (5b) in the second inner chamber (2b); an inner channel (5f) which can house an adsorbent material (6) and at least one inorganic wool material (7) which is retained inside the first segment (5a) of the inner tube by retaining means (7); and a first opening (10) which is communicated with the waste product conduit (8) solely by means of the first inner chamber (2a).



(19) INDIA


(54) Title of the invention : HUMAN MILK FAT SUBSTITUTES

(51) International classification :A23L 1/29 (31) Priority Document No :168263 (32) Priority Date :27/04/2005 (33) Name of priority country :Israel (86) International Application No Filing Date

:PCT/IL2006/000511 :27/04/2006


:NA :NA


:NA :NA


1)ENZYMOTEC LTD. Address of Applicant :RAMAT-GAVRIEL INDUSTRIAL PARK, P.O. BOX 6, 23106 MIGDAL HAEMEQ, ISRAEL. Israel (72)Name of Inventor :

1)SHULMAN, AVIDOR 2)BEN DROR, GAI 3)LAOUZ, HALA 4)YAAKOBI, DOV 5)BAR-ON, ZOHAR 6)BLINDER, GREGORY 7)MEIRI-BENDEK, IRIS 8)HERZOG, YAEL

(57) Abstract : Disclosed are human milk fat (HMF) substitutes, processes for their preparation, uses thereof and fat blends and infants formulae containing them. A fat base composition of the invention comprises a mixture of vegetable-derived triglycerides, with less than 50% of the fatty acid residues bonded at the sn-2 position being saturated; and/or with the amount of saturated fatty acid residues bonded at the sn-2 position of the glycerol backbone less than about 43.5% of the total amount of saturated fatty acid residues. Typically, substantially all of the saturated fatty acids bonded at the sn-2 position of the glycerol backbone are palmitic acid residues. Also disclosed are substitute HMF compositions comprising a blend of at least 25% or at least 30% of the said fat base composition of the invention with up to 75%, or respectively up to 70%, of at least one vegetable oil. Processes for preparing the fat base compositions and blend are also disclosed. Further disclosed are infant formulas comprising the fat base composition or substitute human milk fat composition.



(19) INDIA


(54) Title of the invention : POLAR LIPID MIXTURES, THEIR PREPARATION AND USES

(51) International classification :A23L 1/29 (31) Priority Document No :168294 (32) Priority Date :28/04/2005 (33) Name of priority country :Israel (86) International Application No Filing Date

:PCT/IL2006/000510 :27/04/2006


:NA :NA


:NA :NA


1)ENZYMOTEC LTD Address of Applicant :RAMAT-GAVRIEL INDUSTRIAL PARK, P.O.BOX 6, 23106 MIGDAL HAEMEQ, ISRAEL. Israel (72)Name of Inventor :

1)SHULMAN, AVIDOR 2)ZUABI, RASSAN 3)BEN DROR, GAI 4)TWITO,YONI 5)PELLED, DORI 6)HERZOG, YAEL

(57) Abstract : Disclosed herein are polar lipid mixtures, comprising glycerophospholipids such as phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidylserine (PS) and phosphatidyl-inositol (PI), and sphingolipids such as sphyngomyelin (SM). Most importantly, the ratio of phospholipids in said mixture is comparable to that of HMF, and is represented by SM>PC>PE>PS>PI or SM=PC>PE>PS>PI. Processes for the preparation of said mixtures and uses thereof are also described herein.



(19) INDIA


(54) Title of the invention : STABLE AND SELECTIVE FORMATION OF HOOGSTEEN-TYPE TRIPLEXES AND DUPLEXES USING TWISTED INTERCALATING NUCLEIC ACIDS (TINA) AND PROCESS FOR THE PREPARATION OF TINA

(51) International classification :C12N 15/11 (31) Priority Document No :PA 2005 00762 (32) Priority Date :25/05/2005 (33) Name of priority country :Denmark (86) International Application No Filing Date

:PCT/DK2006/050022 :24/05/2006


:NA :NA


:NA :NA


1)TINA HOLDING APS Address of Applicant :C/O VEJLE SYGEHUS KLINISK GENETISK AFD. KABBELTOFT 25 DK-7100 VEJLE DENMARK Denmark (72)Name of Inventor :

1)FILICHEV, VYACHELSAV V. 2)PEDERSEN, ERIK BJERREGAARD

(57) Abstract : The present invention describes a flexible basestacking monomer that can be incorporated into an oligonucleotide or oligonucleotide analogue, as well as triplex forming oligonucleotides comprising the flexible basestacking monomer. Triplex forming oligonucleotides of the invention are capable of binding sequence specifically to doublestranded target nucleic acids and are therefore of interest for modulation of the activity of target nucleic acids and also detection of target nucleic acids.



(19) INDIA


(54) Title of the invention : "A METHOD AND SYSTEM FOR NETWORKING OF COMPUTERIZED POLLUTION UNDER CONTROL CENTERS "

(51) International classification :BO1;D53/14 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)AVL INDIA PRIVATE LTD. Address of Applicant :376-377 UDYOG VIHAR, PHASE-IV, GURGAON, HARYANA - 122015 INDIA. Haryana India (72)Name of Inventor :

1)SAMEER BHATNAGAR

(57) Abstract : A method and a system for networking of a plurality of Computerized Pollution Under Control Center (CPUCC) is provided. Each CPUCC of the plurality of CPUCC captures pollution data for an automobile using a pollution measurement device. This pollution data provides information on the pollution-causing emission levels of the automobile. The pollution data is stored in a pollution data format using a CPUCC computer. Further, the CPUCC computer is configured with a patching device. The patching device converts the pollution data format to a standard pollution data format. This standard pollution data format is specified by the patching device. In addition, the patching device uploads the pollution data with the standard pollution data format on a central database system. The pollution data with the standard pollution data format is compiled on the central database system to form standard pollution data. The standard pollution data can be accessed from the central database system for analysis and report generation.



(19) INDIA


(54) Title of the invention : "2,6-QUINOLINYL DERIVATIVES, PROCESSES FOR PREPARING THEM AND THEIR USES"


:PCT/EP2006/004811 :22/05/2006


:NA :NA


:NA :NA


1)UCB PHARMA S.A. Address of Applicant :60 ALLEE DE LA RECHERCHE, B-1070 BRUXELLES, BELGIUM Belgium (72)Name of Inventor :

1)BENJAMIN PERRY

(57) Abstract : The present invention concerns 2,6-quinolinyl derivatives, processes for preparing them, pharmaceutical compositions containing them and their use as Pharmaceuticals.



(19) INDIA


(54) Title of the invention : "PROCESS FOR PREPARING 4-[(1,6-DIHYDRO-6-OXO-2-PYRIMIDINYL)] BENZONITRILE"

(51) International classification :C07D 239/46 (31) Priority Document No :05104531.8 (32) Priority Date :26/05/2005 (33) Name of priority country :EAPO (86) International Application No Filing Date

:PCT/EP2006/062606 :24/05/2006


:NA :NA


:NA :NA


1)TIBOTEC PHARMACEUTICALS LTD. Address of Applicant :EASTGATE VILLAGE, EASTGATE, LITTLE ISLAND, CO CORK, IRELAND Ireland (72)Name of Inventor :

1)DIDIER PHILIPPE ROBERT SCHILS 2)ALFRED ELISABETH STAPPERS

(57) Abstract : This invention relates to a process for preparing 4-[(l,6-dihydro-6-oxo-2-pyrimidinyl)- amino]benzonitrile (I) starting from a 4-oxo-l,6-dihydro-pyrimidinylcarboxylic acid ester (II) or starting from a guanidine derivative which is reacted with an alkoxy-methylene malonic acid ester to an ester (II) which is converted to (I), which reaction sequence may be a one-pot procedure.



(19) INDIA


(54) Title of the invention : "NOVEL SUBSTITUTED TETRACYCLIC TETRAHYDROFURAN, PYRROLIDINE AND TETRAHYDROTHIOPHENE DERIVATIVES AND THEIR USE AS A MEDICAMENT"

(51) International classification :C07D 487/04 (31) Priority Document No :05104511.0 (32) Priority Date :26/05/2005 (33) Name of priority country :EPO (86) International Application No Filing Date

:PCT/EP2006/062612 :24/05/2006


:NA :NA


:NA :NA


1)JANSSEN PHARMACEUTICA N.V. Address of Applicant :TURNHOUTSEWEG 30, 2340 BEERSE, BELGIUM. Belgium (72)Name of Inventor :

1)ANTONIUS ADRIANUS HENDRIKUS PETRUS MEGENS 2)ANDERS AVELINO TRABANCO-SUAREZ 3)MOHAMED KOUKNI 4)GEORGES JOSEPH CORNELIUS HOORNAERT 5)TOMASZ KOZLECKI 6)JOSE MARIA CID-NUNEZ 7)HUA MAO 8)SUSHIL CHANDRA JHA 9)FRANCISCO JAVIER FERNANDEZ-GADEA

(57) Abstract : This invention concerns novel substituted tetracyclic tetrahydrofuran, pyrrolidine and tetrahydrothiophene derivatives with binding affinities towards serotonin receptors, in particular 5-HT2A and 5-HT2c receptors, and towards dopamine receptors, in particular dopamine D2 receptors and with norepinephrine reuptake inhibition properties, pharmaceutical compositions comprising the compounds according to the invention, the use thereof as a medicine, in particular for the prevention and/or treatment of a range of psychiatric and neurological disorders, in particular certain psychotic, cardiovascular and gastrokinetic disorders and processes for their production. The compounds according to the invention can be represented by general Formula (I), and comprises also the pharmaceutically acceptable acid or base addition salts thereof, the stereochemically isomeric forms thereof, the N-oxide form thereof and prodrugs thereof, wherein all substituents are defined as in Claim 1.



(19) INDIA


(54) Title of the invention : A POLYESTER MOULDING COMPOSITION FOR USE IN ELECTRONIC DEVICES

(51) International classification :C08K 5/00 (31) Priority Document No :05076035.4 (32) Priority Date :03/05/2005



:PCT/EP2006/003676 :21/04/2006


:NA :NA


:NA :NA


1)DSM IP ASSETS B.V. Address of Applicant :OF HET QVERLOON1, NL-6411 TE HEERLEN, THE NETHERLANDS Netherlands (72)Name of Inventor :

1)KUIJK, EGBERT WILLEM 2)ZWARTKRUIS, THEODORUS JOHANNES GERARDUS 3)JANSSEN, ROBERT HENDRIK CATHARINA

(57) Abstract : The invention relates to A polyester moulding composition consisting of (A) 100 parts by weight (pbw) of a polymer composition consisting of (A-i) at least 50 pbw of a thermoplastic polyester, and, optionally, (A-ii) at least one other polymer, (B) between 2 and 40 pbw of a flame retardant system consisting of (B-i) a nitrogen based organic flame retardant compound free of phosphorus or a phosphorus free salt thereof, and, optionally, (B-ii) less than 1 pbw of a phosphorus containing flame retardant compound, (C) between 0.01 and 1 pbw of a mould release agent, and optionally (D) 0-10 pbw of a fibrous reinforcing agent, and (E) 0-100 pbw of other additives. The invention also relates to the use of the composition for making molded parts, in particular part for use in electrical or electronic applications, and to these molded parts.



(19) INDIA


(54) Title of the invention : "METHOD FOR MEASURING LUMINANCE OF LIGHT-EMITTING OBJECT AND DEVICE THEREFOR"

(51) International classification :G01J 1/02 (31) Priority Document No :2005-150241 (32) Priority Date :23/05/2005 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2006/310259 :23/05/2006


:NA :NA


:NA :NA


1)AVAILVS CORPORATION Address of Applicant :7-4, ROKUBAN-CHO, CHIYODA-KU, TOKYO, JAPAN Japan (72)Name of Inventor :

1)KENICHIRO SAITO 2)MICKO SAKAI

(57) Abstract : A method for measuring the luminance of a light-emitting object having a surface which has a definite area and which emits a low-intensity light and a device therefore, wherein a light-recehing surface of an optical sensor is brought into direct contact with the surface of the light-emitting object to measure the luminance thereof. As the optical sensor, a semiconductor sensor panel or a solar panel is preferably used. The luminance of a light-emitting object which emits a low-intensity light can be measured simply, easily and properly without a darkroom and without a means such as a light condensing lens system which is complicated and difficult to use.



(19) INDIA


(54) Title of the invention : "SYSTEM AND METHOD FOR DETECTING ABNORMAL TRAFFIC BASED ON EARLY NOTIFICATION"


:PCT/IB2006/003116 :04/07/2006


:NA :NA


:NA :NA


1)ALCATEL LUCENT Address of Applicant :54, RUE LA BOETIE, F-75008 PARIS, FRANCE France (72)Name of Inventor :

1)JEAN-MARC ROBERT 2)FRANCOIS J.N. COSQUER

(57) Abstract : This method and system for detecting abnormal traffic in a communications network is based on classifying the traffic in risk and status categories and maintaining a service status table with this information fur each service at a respective node. The risk categories arc initially established based on known software vulnerabilities recognized for the respective service. An early notifier enables further processing of services suspected of malware propagation. Status categories enable segregating the traffic with a "under attack status" from the "non under attack" status, so that the intrusion detection system at the respective node only processes the "under attack" traffic. In this way, the time and amount of processing performed by the intrusion detection system is considerably reduced.



(19) INDIA


(54) Title of the invention : "METHOD AND ARRANGEMENT FOR DETERMINING THE POSITION OF A TAPE-LIKE MEDIUM"

(51) International classification :G11B 27/13 (31) Priority Document No :10 2005 028 362.4 (32) Priority Date :18/06/2005 (33) Name of priority country :Germany (86) International Application No Filing Date

:PCT/EP2006/062815 :01/06/2006


:NA :NA


:NA :NA


1)THOMSON LICENSING Address of Applicant :46 QUAI ALPHONSE LE GALLO,F-92100 BOULOGNE-BILLANCOURT,FRANCE. France (72)Name of Inventor :

1)ANDREAS LOEW 2)KURT-HEINER PHILIPPE

(57) Abstract : A method and an arrangement for determining the position of a tape-like medium are proposed. The method provides for counting pulses which are supplied to the arrangement for determining the position to be counted, blocked or cancelled depending on the respective transport state. To this end, it is established whether the transport direction has been constant for a defined amount of time or over a defined distance. The transport direction determines whether the counter is incremented or decremented. In addition, counting pulses which rapidly follow one another are blocked in order to avoid undesirable double triggering. In order to avoid losing blocked counting pulses in an undesirable manner, the latter are stored and are applied to the counter, or discarded, depending on the transport state before and after blocking.



(19) INDIA


(54) Title of the invention : FLEXIBLE HOUSING FOR AN AIRBAG MODULE

(51) International classification :B60R 21/217 (31) Priority Document No :11/174,956 (32) Priority Date :05/07/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/2006/015812 :26/04/2006


:NA :NA


:NA :NA


1)AUTOLIV ASP, INC Address of Applicant :3350 AIRPORT ROAD, OGDEN, UT 84405, USA U.S.A. (72)Name of Inventor :

1)LARRY D. ROSE 2)JEFFREY DANIEL WILLIAMS

(57) Abstract : A housing for an airbag module that contains an inflatable airbag cushion in a compacted configuration before being inflated by inflation gas supplied by an inflator device. The housing includes a collar formed of a rigid material for attaching the housing lo a vehicle and a chute assembly formed of a flexible material and secured to the collar.



(19) INDIA


(54) Title of the invention : COMPONENT FOR SHORTENING CHAINS

(51) International classification :F16G 15/04 (31) Priority Document No :10 2005 019 641.1 (32) Priority Date :26/04/2005 (33) Name of priority country :Germany (86) International Application No Filing Date

:PCT/EP2006/003342 :12/04/2006


:NA :NA


:NA :NA


1)RUD KETTEN RIEGER & DIETZ GMBH U. CO. KG. Address of Applicant :KG; FRIEDENSINSEL,73432 AALEN-UNTERKOCHEN, GERMANY. Germany (72)Name of Inventor :

1)SMETZ, REINHARD;

(57) Abstract : In a component for shortening a chain (12), said component being provided with a connector bow (2) that can be hung into a connector body (6) and with a shortening organ (7), a safety bolt, which is simultaneously formed as a retainer pin (3) for the end link (11) of the chain (12) to be shortened, serves to secure the position of the connector bow (2) in the connector body (6). (Fig-1)



(19) INDIA


(54) Title of the invention : QUICK ASSEMBLING STRUCTURE FOR LED LAMP AND HEAT DISSIPATING MOUDLE

(51) International classification :G01R0/44 (31) Priority Document No :095211395 (32) Priority Date :29/06/2006



:NA :NA


:NA :NA


NA :NA


1)AUGUX CO.,LTD Address of Applicant :1F.-9,NO.40-2,SEC.1,MINSHENG N.RD., GUEISHAN TOWNSHIP, TAOYUAN COUNTY 333, TAIWAN Taiwan (72)Name of Inventor :

1)WANG PEI-CHOA

(57) Abstract : In a quick assembling structure for LED lamp and heat dissipating module, the LED lamp set includes a casing and an LED module, and the casing has a containing hole, a stopping member protruded from an internal edge of the containing hole, a plurality of support stands extended outward from an external edge of the containing hole, and a latch portion formed on an internal side of the support stand. The LED module is contained in the containing hole of the casing and includes a base board and a plurality of LEDs fixed onto the bottom of the base board, and the heat dissipating module has an isothermal board installed on a side of the support stand of the casing, and a surface of the isothermal board is attached onto the base board of the LED module, and another surface is latched to a latch portion of the support stand. Such arrangement not only greatly reduces the labor cost for the assembling process, but also lowers the material cost for the screws.



(19) INDIA


(54) Title of the invention : "POWER CONTROLLING APPARATUS AND METHOD IN MOBILE COMMUNICATION SYSTEM"

(51) International classification :H04B 1/707 (31) Priority Document No :1999/50768 (32) Priority Date :16/11/1999 (33) Name of priority country :Republic of Korea (86) International Application No Filing Date

:PCT/KR00/01311 :16/11/2000

(87) International Publication No : WO/2001/037443 (61) Patent of Addition to Application Number Filing Date

:NA :NA


:IN/PCT/2002/00450/DEL:01/05/2002


1)SAMSUNG ELECTRONICS CO., LTD. Address of Applicant :416, MAETAN 3-DONG, PALDAL-GU, SUWON-SHI, KYUNGKI-DO, REPUBLIC OF KOREA. Republic of Korea (72)Name of Inventor :

1)PARK, JIN-SOO 2)KIM, YOUN-SUN 3)AHN, JAE-MIN 4)YOON, SOON-YOUNG 5)KANG, HEE-WON

(57) Abstract : A power controlling apparatus and method in a mobile communication system. A receiver in a mobile station multiplexes the frame reception result indicator bits for at least two traffic channels received from a transmitter in a base station, inserts the multiplexed frame reception result indicator bits in a pilot signal bit by bit, and transmits the reverse frame. Then, the transmitter extracts the pilot signal from the reverse frame, demultiplexes the frame reception result indicator bits, and performs a power control on the traffic channels based on the values of the frame reception result indicator bits.



(19) INDIA


(54) Title of the invention : "LUBRICATING COMPOSITION HAVING IMPROVED STORAGE STABILITY"

(51) International classification :C10M 141/12 (31) Priority Document No :11/122,463 (32) Priority Date :04/05/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/010812 :24/03/2006


:NA :NA


:NA :NA


1)CHEVRON U.S.A.INC. Address of Applicant :6001 BOLLINGER CANYON ROAD, BUILDING T,3RD FLOOR, SAN RAMON, CALIFORNIA 94583, USA U.S.A. (72)Name of Inventor :

1)ZAKARIAN, JOHN, A. 2)HAIRE, MICHAEL, J.

(57) Abstract : A lubricating oil composition having superior storage stability and load-carrying effect is disclosed. The composition comprises four components: (1) an alkali metal borate; (2) an oil-soluble sulfur compound; (3) a trialkyl hydrogen phosphite; and (4) a mixture of greater than 50% neutralized acidic phosphates that are essentially free of monothiophosphates.



(19) INDIA


(54) Title of the invention : "PURGED FLAMEHOLDER FUEL SHIELD"

(51) International classification :F23D11/40 (31) Priority Document No :11/478,246 (32) Priority Date :29/06/2006(33) Name of priority country :U.S.A. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA



1)MAYER JEFFREY CARL 2)ROBERTS BRIAN BENSCOTER

(57) Abstract : A fuel shield (68) is configured for use in the afterburner (34) of a turbofan aircraft engine (10). The shield (68) includes wings (72,74) obliquely joined together at a nose (76) to conform with the leading edge region (52) of a flameholder vane (42). A hood (78) is joined to the wings (72,74) and extends obliquely therefrom to conform with a supporting outer shell (44) of the flameholder (34).



(19) INDIA


(54) Title of the invention : COMPOSITIONS AND METHODS

(51) International classification :A01N 37/18 (31) Priority Document No :60/692,858 (32) Priority Date :22/06/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/023567 :16/06/2006


:NA :NA


:NA :NA


1)SYNGENTA PARTICIPATIONS AG. Address of Applicant :SHWARZWALDELLEE 215, CH-4058 BASEL SWITZERLAND Switzerland (72)Name of Inventor :

1)HARRISON STEVEN 2)DRUEBBISCH BERND 3)EWAN PATRICK

(57) Abstract : The present invention relates to mixtures of strobilurin fungicides and plant growth regulators and to the foliar application of these mixtures on crops including cotton.



(19) INDIA


(54) Title of the invention : "POLYMER CONJUGATE ENHANCED BIOASSAYS"

(51) International classification :C12N 11/08 (31) Priority Document No :60/677,218 (32) Priority Date :02/05/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/016580 :02/05/2006


:NA :NA


:NA :NA


1)ANP TECHNOLOGIES, INC. Address of Applicant :824 INTERCHANGE BOULEVARD, NAWARK, DELAWARE 19711, UNITED STATES OF AMERICA U.S.A. (72)Name of Inventor :

1)YIN, RAY 2)QIN, DUJIE 3)PAN, JING

(57) Abstract : Modified branched polymers are combined with bioactive agents which are one member of a binding pair for use in an assay.



(19) INDIA


(54) Title of the invention : WATER-SOLUBLE PREFLUX AND USAGE OF THE SAME

(51) International classification :B23K 35/363 (31) Priority Document No :2005-150279 (32) Priority Date :24/05/2005 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2006/310271 :23/05/2006


:NA :NA


:NA :NA


1)SHIKOKU CHEMICALS CORPORATION Address of Applicant :8-537-1, DOKI-CHO HIGASHI, MARUGAME-SHI, KAGAWA 763-8504, JAPAN Japan (72)Name of Inventor :

1)HIRAO, HIROHIKO 2)KIKUKAWA, YOSHIMASA 3)MURAI, TAKAYUKI

(57) Abstract : It is an object to provide a water-soluble preflux containing a low-volatile solubilizing agent excellent in performance to dissolve an imidazole compound in water and capable of bringing out an excellent film-forming property of the imidazole compound and also to provide a treating method for the surface of a metal conductive part which comprises bringing the surface into contact with the above water-soluble preflux. Another object is to provide a printed wiring board wherein the surface of a metal conductive part has been brought into contact with the above water-soluble preflux and a soldering method which comprises bringing the surface of a metal conductive part into contact with the above water-soluble preflux and subsequently soldering the surface. A water-soluble preflux comprising an imidazole compound and a carboxylic acid compound having 4 to 16 carbon atoms represented by the following general formula 1: [Formula 1] wherein R1 represents a linear or branched alkyl group having 1 to 4 carbon atoms, R2 represents a hydrogen atom or a methyl group, m represents an integer of 0 to 3, and n represents 1 or 2.



(19) INDIA


(54) Title of the invention : AN INTEGRATED ON-LINE TWO DIMENSIONAL METHOD AND DEVICE FOR SYNCHRONIZED ANALYTICAL TEMPERATURE RISING ELUTION FRACTIONATION AND GEL PERMEATION CHROMATOGRAPHY

(51) International classification :G01N 30/46 (31) Priority Document No :60/684,044 (32) Priority Date :24/05/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/019933 :23/05/2006


:NA :NA


:NA :NA


1)CHEVRON PHILLIPS CHEMICAL COMPANY, LP Address of Applicant :10001 SIX PINES DRIVE, THE WOODLANDS, TX 77380,USA U.S.A. (72)Name of Inventor :

1)YU, YOULU 2)TSO, CHUNG, C 3)DESLAURIERS, PAUL, J

(57) Abstract : An analytical method comprising performing a first fractionation of a polymer sample based on differences in crystallizability to provide a first set of sample fractions, performing a first analysis on the first set of sample fractions, performing a second fractionation of the first set of sample fractions to produce a second set of sample fractions, performing a second analysis on the second set of sample fractions, and synchronizing the first fractionation and second fractionation to provide about concurrent analysis of the polymer sample.



(19) INDIA


(54) Title of the invention : METHOD FOR THE TREATMENT OF NOISE PHOBIA IN COMPANION ANIMALS


:PCT/US2006/019685 :22/05/2006


:NA :NA


:NA :NA


1)WYETH Address of Applicant :FIVE GIRALDA FARMS, MADISON NEW JERSEY 07940, USA U.S.A. (72)Name of Inventor :

1)ENOS, ANNMARIE 2)EPPLER, CECIL MARK 3)POWELL, DENNIS WILLIAM

(57) Abstract : The present invention provides a method for the non-sedative treatment of noise phobia in a companion animal, particularly a dog, which comprises providing said animal with a therapeutically effective amount of N-methyl-N-[3-(3-methyl-1,2,4-triazolo-[4,3-b]pyridazin-6-yl)phenyl]acetamide or 7-(3-pyridyl)pyrazolo[1,5-a]pyrimidine-3-carbonitrile.



(19) INDIA


(54) Title of the invention : ANTI-GM-CSF ANTIBODIES AND USES THEREFOR

(51) International classification :C07K 16/24 (31) Priority Document No :60/682,009 (32) Priority Date :18/05/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/EP2006/004696 :17/05/2006


:NA :NA


:NA :NA


1)MORPHOSYS AG Address of Applicant :LENA-CHIRST-STRASSE 48, 82152 MARTINSRIED, GERMANY. Germany (72)Name of Inventor :

1)STEIDL, STEFAN 2)THOMASSEN-WOLF, ELISABETH

(57) Abstract : The present invention provides recombinant antigen-binding regions, antibodies and functional fragments thereof that are specific for GM-CSF, which plays an integral role in various disorders or conditions. These antibodies, accordingly, can be used to treat, for example, inflammatory diseases such as rheumatoid arthritis. Antibodies of the invention also can be used in the diagnostics field, as well as for further investigating the role of GM-CSF in the progression of various disorders. The invention also provides nucleic acid sequences encoding the foregoing antibodies, vectors containing the same, pharmaceutical compositions and kits with instructions for use.



(19) INDIA


(54) Title of the invention : SINGLE-CHAIN ANTIBODY WITH CLEAVABLE LINKER

(51) International classification :G01N 33/53 (31) Priority Document No :60/675,218 (32) Priority Date :26/04/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/016166 :26/04/2006


:NA :NA


:NA :NA


1)GLYCOFI INC. Address of Applicant :LAFAYETTE STREET, SUITE 200, LEBANON, NEW HAMPSHIRE 03766,USA U.S.A. (72)Name of Inventor :

1)ZHA, DONGXING 2)CHOI, BYUNG-KWON 3)GERNGROSS, TILLMAN,U

(57) Abstract : Disclosed are antibodies and methods for making antibodies with desired glycosylation and efficient production Host cells transfornd with a aucleic add encoding a iusion pro cy ns, each compnsing a vanable region aixi a constant region imdsef^td by a spoceipep^ cleavage site arc cultured to express the nucleic acids and are cleaved by appropriate proteases to produce antibodies.



(19) INDIA


(54) Title of the invention : "IMIDIAZO-AND TRIAZOLOPYRIDINES AS INHIBITORS OF 11-BETA HYDROXYSTERIOD DEHYDROGENASE TYPE I"


:PCT/US2006/022576 :08/06/2006


:NA :NA


:NA :NA


1)BRISTOL-MYERS SQUIBB COMPANY Address of Applicant :P.O.BOX 4000, ROUTE 206 AND PROVINCE LINE ROAD, PRICETON, NEW JERSEY 08543-4000,USA. U.S.A. (72)Name of Inventor :

1)JAMES J.LI 2)LAWRENCE G. HAMANN 3)HAIXIA WANG 4)ZHEMING RUAN 5)CHRISTOPHER B. COOPER 6)JUN LI 7)JEFFREY A.ROBL

(57) Abstract : Novel compounds are provided which are 11-beta-hydroxysteroid dehydrogenase type I inhibitors. 11-beta-hydroxysteroid dehydrogenase type I inhibitors are useful in treating, preventing, or slowing the progression of diseases requiring 11-beta-hydroxysteroid dehydrogenase type I inhibitor therapy. These novel compounds have the structure:(I) or stereoisomers or pharmaceutically acceptable salts thereof, wherein W, L, R3, R3a, R3b and R4 are defined herein.



(19) INDIA


(54) Title of the invention : "IMIDIAZO-AND TRIAZOLOPYRIDINES AS INHIBITORS OF 11-BETA HYDROXYSTERIOD DEHYDROGENASE TYPE I"


:PCT/US2006/022260 :08/06/2006


:NA :NA


:NA :NA


1)BRISTOL-MYERS SQUIBB COMPANY Address of Applicant :ROUTE 206 AND PROVINCE LINE ROAD, PRINCETON, NEW JERSEY 08543-4000, USA. U.S.A. (72)Name of Inventor :

1)JAMES J.LI 2)LAWRENCE G. HAMANN 3)HAIXIA WANG

(57) Abstract : Novel compounds are provided which are 11-beta-hydroxysteroid dehydrogenase type I inhibitors. 11-beta-hydroxysteroid dehydrogenase type I inhibitors are useful in treating, preventing, or slowing the progression of diseases requiring 11-beta-hydroxysteroid dehydrogenasc type I inhibitor therapy. These novel compounds have the structure: W-L-Z (I) or stereoiso-mers or prodrugs or pharmaceutically acceptable salts thereof, wherein W, L and Z are defined herein.



(19) INDIA


(54) Title of the invention : PROCESS FOR PRODUCING AN AERATED GRANULATED FOODSTUFF, AND CORRESPONDING PRODUCT AND DEVICE

(51) International classification :A23L 1/00 (31) Priority Document No :TO2005A000389 (32) Priority Date :07/06/2005 (33) Name of priority country :Italy (86) International Application No Filing Date

:PCT/IB2006/001482 :31/05/2006


:NA :NA


:NA :NA


1)SOREMARTEC S.A. Address of Applicant :DREVE DE I'ARC-EN-CIEL 102, B-6700 ARLON-SCHIPPACH, BELGIUM. Belgium (72)Name of Inventor :

1)MANSUINO, SERGIO

(57) Abstract : In order to make a granulated substance (G) of an aerated foodstuff, such as granulated meringue, said substance having an outer surface that appears continuous to the naked eye, an alveolar (18) structure (12) is provided, and a liquid precursor of the aerated foodstuff (for example, the so-called "meringue foamed mixture" in the case of meringue) is introduced (20, 22) into the cavities (18) of the structure. Consolidation of the precursor introduced into the cavities (18), obtained, for example, via heating (24), leads to the formation, in the aforesaid cavities (18), of respective particles of granulate (G) , which are finally extracted from the cavities (18), typically exploiting the deformation of the material constituting the alveolar structure.



(19) INDIA


(54) Title of the invention : "INTERNAL COMBUSTION ENGINE FOR VEHICLE"

(51) International classification :F02M57/00



:NA :NA


:NA :NA


:NA :NA


1)HONDA MOTOR CO., LTD., Address of Applicant :1-1,MINAMI-AOYAMA 2-CHOME, MINATO-KU, TOKYO 107-8556 JAPAN Japan (72)Name of Inventor :

1)RYO KUBOTA, MASAHIDE MIMIURA, YOSHIHIRO

FUNAYAMA AND AKIRA HAMAUZU

(57) Abstract : To dispose ignition plugs and a secondary air introduction path efficiently in a vehicular internal combustion engine having intake and exhaust ports and two ignition plugs in a cylinder head. [Solving Means] A vehicular internal combustion engine that includes a cylinder head 24 is provided. The cylinder head 24 has an intake port 49 and an exhaust port 50. The cylinder head 24 includes two ignition plugs 64, 65 mounted therein. A first ignition plug 64 of the two is disposed on a first side of the exhaust port 50. A secondary air introduction path 83 that supplies the exhaust port 50 with secondary air is disposed on a second side of the exhaust port 50.



(19) INDIA


(54) Title of the invention : "AN IMPROVED PROCESS FOR THE PREPARATION OF CRYSTALLINE N-FORMIMIDOYL THIENAMYCIN MONOHYDRATE (IMIPENEM MONOHYDRATE)"



:NA :NA


:NA :NA


:NA :NA


1)RANBAXY LABORATORIES LIMITED Address of Applicant :19, NEHRU PLACE, NEW DELHI-110019, INDIA. Delhi India (72)Name of Inventor :

1)YATENDRA KUMAR 2)NEERA TEWARI 3)RAM CHANDER ARYAN 4)BISHWA PRAKASH RAI 5)SEEMA AHUJA

(57) Abstract : The present invention relates to process for the preparation of crystalline N-formimidoyI thienamycin monohydrate in the presence of a secondary amine in a suitable N-substituted lactam or N, N-disubstituted amide.


(12) PATENT APPLICATION PUBLICATION (21) Application No.IN/PCT/2001/00016/DEL A

(19) INDIA


(54) Title of the invention : "DOWNHOLE WELL CORROSION MONITORING APPARATUS AND METHOD"

(51) International classification :E21B 47/01 (31) Priority Document No :09/116,052 (32) Priority Date :15/07/1998 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/EP99/04987 :14/07/1999


:NA :NA


:NA :NA


1)SAUDI ARABIAN OIL COMPANY Address of Applicant :R3296, ADMINISTRATION BUILDING, DHAHRAN 31311, SAUDI ARABIA. Saudi Arabia (72)Name of Inventor :

1)BARRY VINCENT JOHNSON

(57) Abstract : The existence and rate of corrosion in a section of a well tubing or well casing string is determined and monitored continuously or intermittently by installing at predetermined locations as the string is placed in the well bore, sections of pipe that have been, fitted with an array of piezoelectric transducers positioned around the circumference of the pipe and a microprocessor that controls signals going to and from each array of transducers and signals going to and received from controls and instrumentation apparatus located at the earth's surface. The apparatus can also include a reference block isolated from corrosion sources that is fitted with transducers associated with the microprocessor for the adjacent array of transducers. The microprocessors at varying locations along the string are electrically connected to the surface control and instrumentation apparatus by conductor cables and/or by wireless means using the pipe string as the conductive path for electrical signals.



(19) INDIA


(54) Title of the invention : "A PROCESS FOR PRODUCTION OF FORTIFIED SUGAR WITH VITAMIN 'A' AND APPARATUS THERE FOR"

(51) International classification :C13F 1/00


:NA :NA


:NA :NA


:NA :NA


1)SURENDRA SINGH SIROHI Address of Applicant :A-28, SECTOR-19, NOIDA-201301, UTTAR PRADESH, INDIA. Uttar Pradesh India (72)Name of Inventor :

1)SURENDRA SINGH SIROHI

(57) Abstract : An apparatus for fortifying the sugar and process for such fortification comprising a food grade belt conveyor receiving the sugar form the sugar grader, an elevator to elevate the sugar taken from sugar grader through said food grade belt conveyor to a bin, pouring the said sugar on the bin , discharging the predetermined amount of Vitamin -A premix from the dosing machine on the said second food grade belt conveyor having sugar on it, feeding the said sugar mixed with premix to the sugar drier cum mixer to heat the sugar at a pre-determined temperature by passing hot air at a desired temperature from the hot and cold system to have sugar crystal coated uniformly with vitamin A premix at their surface so that during the process of handling the sugar from sugar bags or transferring it from one bag to other, Vitamin 'A' premix may not be segregated from the sugar crystal, passing the said sugar crystals coated with said premix of Vitamin-A on the third food grade conveyor belt placed at end of the said sugar drier cum mixer getting the supply of sugar by gravitational force to the bin for the packing of the said fortified sugar.



(19) INDIA


(54) Title of the invention : "POLYURETHANE BASED PIGMENT DISPERSANTS WHICH CONTAIN REACTIVE DOUBLE BONDS"

(51) International classification :C08G 18/08 (31) Priority Document No :60/688,011 (32) Priority Date :07/06/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/021250 :01/06/2006


:NA :NA


:NA :NA


1)LUBRIZOL ADVANCED MATERIALS, INC., Address of Applicant :9911 BRECKSVILLE ROAD, CLEVELAND, OHIO 44141-3247, USA. U.S.A. (72)Name of Inventor :

1)STUART RICHARDS, 2)ANDREW J.SHOOTER,

(57) Abstract : Polymeric urethane dispersants with solubilizing polymer chains and with reactive carbon to carbon double bonds are described. The reactive double bonds facilitate molecular weight build-up of the dispersant on dispersed particles (enhancing colloidal stability) or enhance the ability of the dispersants to be crosslinked into a matrix material.



(19) INDIA


(54) Title of the invention : 2,4-DIAMINO-PYRIMIDINES AS AURORA INHIBITORS




:PCT/EP2006/063736 :30/06/2006


:NA :NA


:NA :NA


1)BOEHRINGER INGELHEIM INTERNATIONAL GMBH. Address of Applicant :BINGER STRASSE 173, 55216 INGELHEIM, GERMANY. Germany (72)Name of Inventor :

1)STEPHAN KARL ZAHN 2)GUIDO BOEHMELT 3)ANDREAS MANTOULIDIS 4)ULRICH REISER 5)MATTHIAS TREU 6)ULRICH GUERTLER 7)ANDREAS SCHOOP 8)FLAVIO SOLCA 9)ULRIKE TONTSCH-GRUNT 10)RALPH BRUECKNER 11)CHARLOTTE REITHER 12)LARS HERFURTH 13)OLIVER KRAEMER 14)HEINZ STADTMUELLER 15)HARALD ENGELHARDT

(57) Abstract : The present invention encompasses compounds of general formula (1)wherein R1 to R3 are defined as in claim 1, which are suitable for the treatment of diseases characterized by excessive or abnormal cell proliferation, and the use thereof for preparing a pharmaceutical composition having the above-mentioned properties.



(19) INDIA


(54) Title of the invention : TOPICAL COMPOSITIONS COMPRISING NANOPARTICLES OF AN ISOFLAVONE

(51) International classification :A61K 31/352 (31) Priority Document No :05014094.6 (32) Priority Date :29/06/2005 (33) Name of priority country :EPO (86) International Application No Filing Date

:PCT/EP2006/000826 :31/01/2006


:NA :NA


:NA :NA


1)DSM IP ASSETS B.V. Address of Applicant :HET OVERLOON 1, NL-6411 TE HEERLEN, THE NETHERLANDS. Netherlands (72)Name of Inventor :

1)BEUMER, RAPHAEL 2)CHEN, CHYI-CHENG 3)GUTZWILLER, HEINZ 4)MAILLAN, PHILIPPE EMMANUEL 5)NOWOTNY, MARKUS 6)SCHLEGEL, BERND 7)VOLLHARDT, JURGEN H.

(57) Abstract : The present invention is directed to topical compositions, comprising isoflavone nanoparticle compositions. The isoflavone nanoparticle compositions contain isoflavone in the form of nanoparticles and preferably a carrier. In the topical compositions recrystallization of the isoflavone to bigger particles is avoided.



(19) INDIA


(54) Title of the invention : NOVEL PROCESS FOR ENZYMATIC ACRYLAMIDE REDUCTION IN FOOD PRODUCTS

(51) International classification :C12N 9/18 (31) Priority Document No :05104683.7 (32) Priority Date :31/05/2005 (33) Name of priority country :EPO (86) International Application No Filing Date

:PCT/EP2006/062673 :29/05/2006


:NA :NA


:NA :NA



1)DE BOER, LEX

(57) Abstract : The present invention relates to a novel enzyme composition comprising asparaginase and at least one hydrolysing enzyme, the use of such composition to reduce acrylamide levels in food products and a method to produce food products involving at least one heating step, comprising adding: a. asparaginase and b. at least one hydrolyzing enzyme to an intermediate form of said food product in said production process whereby the asparaginase and at least one hydrolyzing enzyme are added prior to said heating step in an amount that is effective in reducing the level of acrylamide of the food product in comparison to a food product whereto no asparaginase and hydrolyzing enzyme were added.



(19) INDIA


(54) Title of the invention : NOVEL POLYSILOXANE SUNSCREENS

(51) International classification :A61Q 17/04 (31) Priority Document No :05011678.9 (32) Priority Date :31/05/2005 (33) Name of priority country :EPO (86) International Application No Filing Date

:PCT/EP2006/004879 :23/05/2006


:NA :NA


:NA :NA



1)BERG-SCHULTZ, KATJA 2)POSCHALKO, ALEXANDER 3)VOLLHARDT, JURGEN H

(57) Abstract : The present invention relates to novel sunscreens on the basis of polysiloxanes, to their preparation and to their use, especially in formulations for the protection against harmful effects of sunlight.



(19) INDIA


(54) Title of the invention : "DISPLAYING VEHICLE INFORMATION"

(51) International classification :B60K 35/00 (31) Priority Document No :11/134,562 (32) Priority Date :20/05/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/019194 :17/05/2006


:NA :NA


:NA :NA


1)BOSE CORPORATION Address of Applicant :THE MOUNTAIN, FRAMINGHAM, MASSACHUSETTS 01701-9168, USA U.S.A. (72)Name of Inventor :

1)ANDREW OLCOTT

(57) Abstract : An information display unit for an automobile includes a display screen and a user interlace presented on the display screen that simultaneously presents at least two display elements each depicting information relating to a different subsystem of the automobile (e.g., a navigational subsystem and an audio subsystem). The user interface visually emphasizes one of display element relative to another other display element in response to a predetermined stimulus such as a user's hand actuating or coming near a radio control knob or an approaching turn recommended by a navigation system.



(19) INDIA


(54) Title of the invention : "METHOD AND APPARATUS FOR PROVIDING SECURITY FOR DEBUG CIRCUITRY"


:PCT/US2004/022513 :15/07/2004


:NA :NA


:NA :NA


1)FREESCALE SEMICONDUCTOR, INC. Address of Applicant :7700 WEST PARMER LANE, AUSTIN, TEXAS 78729 UNITED STATES OF AMERICA (EARLIER AT 6501 WILLIAM CANNON DRIVE WEST, AUSTIN, TEXAS 78735 USA) U.S.A. (72)Name of Inventor :

1)MOYE, WILLIAM, C. 2)TKACIK, THOMAS, E.

(57) Abstract : The invention relates to debug circuitry (20) and more particularly to a method and apparatus for providing security for debug circuitry (20). In one embodiment, a plurality of non-volatile elements (38) are used in providing selective disabling and re-enabling of at least a portion of the debug circuitry (20). Authentication may also be used. The present invention may use any debug interface, including standard debug interfaces such as the JTAG debug interface defined by the IEEE.



(19) INDIA


(54) Title of the invention : "PYRIMIDINE DERIVATIVES FOR THE TREATMENT OP GABA B MEDIATED NERVOUS SYSTEM DISORDERS"


:PCT/EP2006/006083 :23/06/2006


:NA :NA


:NA :NA


1)NOVARTIS AG Address of Applicant :LICHSTRASSE 35, CH-4056 BASEL SWITZERLAND Switzerland (72)Name of Inventor :

1)FLOERSHEIM PHILIPP 2)FROESTL WOLFGANG 3)GUERY SEBASTIEN 4)KAUPMANN KLEMENS 5)KOLLER MANUEL

(57) Abstract : The invention relates to novel heterocyclic compounds of the formula in free base form or in acid addition salt form, in which R1, R2, R3, R4 and A are as defined in-the specification, to their preparation, to their use as medicaments and to medicaments comprising them.



(19) INDIA


(54) Title of the invention : "CRYSTALLINE AND OTHER FORMS OF 4-AMINO-5-FLUORO-3-[6-(4-METHYLPIPERAZIN-1-YL)-1H-BENZIMIDAZOL-2-YL]-1H-QUINOLIN-2-ONE LACTIC ACID SALTS"


:PCT/US2006/020296 :23/05/2006


:NA :NA


:NA :NA


1)NOVARITS AG. Address of Applicant :4560 HORTON STREET, EMERYVILLE, CA 94608 USA. U.S.A. (72)Name of Inventor :

1)OKHAMAFE AUGUSTUS 2)CHOU JOYCE 3)GULLAPALLI RAMPURNA 4)HARWOOD ERIC 5)RYCKMAN DAVID 6)ZHU SHUGUANG 7)SHANG XIAO

(57) Abstract : The present invention relates to non-hydrate crystalline forms of 4-amino- 5-fiuoro-3 -[6-(4-methylpiperazin- 1 -yl)- 1 H-benzimidazol-2-yl] - 1 H-quinolin-2-one lactic acid salts, solid pharmaceutical formulations containing the same and methods of use. The present invention also relates to crystalline hydrates of 4-arnino-5-fiuoro-3-[6-(4- methylpiperazin-l-yl)-IH-benziMidazol-2-yl]-IH-quinolin-2-one lactic acid salts, pharmaceutical formulations containing the same and methods of use related thereto. The present invention further relates to crystalline solvates of 4-amino-5-fluoro-3-[6-(4-methylpiperazin-l-yl)-IH-benzimidazol-2-yl]-IH-quinolin-2-one lactic acid salts.



(19) INDIA


(54) Title of the invention : "PHARMACEUTICAL FORMULATION OF APOMORPHINE FOR BUCCAL ADMINISTRATION"

(51) International classification :A61K 9/00 (31) Priority Document No :0509317.4 (32) Priority Date :06/05/2005 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/GB2006/001665 :08/05/2006


:NA :NA


:NA :NA


1)AMARIN PHARMACEUTICALS IRELAND LIMITED Address of Applicant :50 PEMBROKE ROAD, BALLSBRIDGE, DUBLIN 4, IRELAND; Ireland (72)Name of Inventor :

1)CLARKE, ANTHONY

(57) Abstract : The present invention provides a kit comprising, in separate compartments of a container, the following components (a) and (b): (a) a combination of apomorphine or a pharmaceutically acceptable acid addition salt thereof and a pharmaceutically acceptable excipient or carrier; and (b) a solution which comprises a diluent and a pH modifying agent; the components being presented such that they can be combined at the point of use into a formulation which is adjusted to a pH ranging from mildly acidic to alkaline and which is suitable for buccal administration. The formulation is useful in treating Parkinson's disease and in promoting sexual function.



(19) INDIA


(54) Title of the invention : "SYSTEM AND METHOD FOR CONTEXT DEPENDENT DATA SAMPLING"

(51) International classification :H04L 12/00


:NA :NA


:NA :NA


:NA :NA


1)MOTOROLA, INC. Address of Applicant :1303 E. ALGONQUIN ROAD, SCHAUMBURG, IL 60196, USA U.S.A. (72)Name of Inventor :

1)NATARAJ K S

(57) Abstract : The context associated with a vehicle (202) is determined. Data sent by vehicle sensors (208) in the vehicle is statistically sampled at a sampling rate determined at least in part by the context to provide sampled data.



(19) INDIA


(54) Title of the invention : STRUCTURE OF COMPACT DISC PROTECTIVE PACKING



:NA :NA


:NA :NA


:NA :NA


1)PRINCO CORP. Address of Applicant :TAIWAN R.O.C. OF NO. 6, CREATION 4TH ROAD, HSINCHU SCIENCE PARK, TAIWAN, R.O.C. Taiwan (72)Name of Inventor :

1)CHIU PEI-LIANG

(57) Abstract : A type of "structure of compact disc protective packing (I)" applicable to reinforce protection of compact disc packing, comprises of a complex number of stack dishes where each dish has a corrugated cushion veined with corrugated lines that form a cushion for effective protection.



(19) INDIA


(54) Title of the invention : A METHOD OF OPTIMIZATION OF THE PRODUCTION OF ALKALINE PROTEASE FROM BACILLUS LICHENIFORMIS AND ITS USE IN DEHAIRING OF ANIMAL SKINS AND HIDES"

(51) International classification :C14C 1/06


:NA :NA


:NA :NA


:NA :NA


1)UNIVERSITY OF DELHI SOUTH CAMPUS. Address of Applicant :BENITO JUAREZ ROAD, NEW DELHI - 110 021, INDIA. Delhi India (72)Name of Inventor :

1)PROF SAXENA R. K. 2)MR. SARAN SAURABH

(57) Abstract : A process for optimization of the production of the alkaline protease from Bacillus Hcheniformis and its use in dehairing of the animal hides and skins by cultivating Bacillus Hcheniformis under condition aerobic condition in a nutrient medium containing assimilable carbon and nitrogen sources, characterized by maintaining a pH value of the nutrient medium between 6.0 to 12.0, with inoculum densities in the range of about 0.5 % to about 5.0 %, maintaining a temperature of about 20°C to about 100 °C, agitating the reactor at about 100 to about 300 rpm, maintaining the concentration of nitrogen and carbon source at about 0.5 % to about 5.0 % and to about 0.2 to about 4.0 % respectively, in presence of a metal ion source at the concentration of about 0.1 to about 2.0 mM and recovering the enzyme produced extracellurlarly during the cultivation.



(19) INDIA


(54) Title of the invention : "A CONTROLLED IMPEDANCE CMOS OUTPUT BUFFER"

(51) International classification :H04R 25/00


:NA :NA


:NA :NA


:NA :NA


1)STMICROELETRONICS PVT. LTD. Address of Applicant :PLOT NO. 1, KNOWLEDGE PARK III, GREATER NOIDA-201308, UP INDIA. Uttar Pradesh India (72)Name of Inventor :

1)SAURABH SAXENA

(57) Abstract : The instant invention describes a CMOS Output Buffer providing controlled output impedance The invention discloses a CMOS output buffer comprising three internal sections each of which provides a impedance control for a corresponding region of the output V-I characteristics the Deep Linear, Deep Saturation and Transition regions. Each internal section comprises controlled current sinks/current sources that are enabled to provide a precise control over the DC impedance of the Driver across the PAD voltage range.



(19) INDIA


(54) Title of the invention : "A PROCESS FOR GENERATING MICRO AND SUB-MICRO PATTERNS ON THE SURFACES OR LAYERS OF POLYMERS"



:NA :NA


:NA :NA


:NA :NA


1)INDIAN INSTITUTE OF TECHNOLOGY Address of Applicant :KANPUR U.P., INDIA Uttar Pradesh India (72)Name of Inventor :

1)SHARMA ASHUTOSH 2)FARUQUI DANISH 3)FARUQUI DANISH 4)MUKHERJEE RABIBRATA 5)PATIL, GANESH

(57) Abstract : The invention describes a process for generating micron and sub-micron sized physical relief patterns by direct solid state imprinting on soft solid surface layers, at room temperature, without the application of any external pressure, using a patterned flexible foil as the stamp. The pattern transfer takes place primarily due to elastic deformations at the surface, due to the adhesive interaction between the patterned stamp and soft solid surface. The use of a flexible patterned stamp, instead of a rigid one, results in deformations of both the stamp and the soft surface to make a spontaneous conformal contact allowing high fidelity pattern transfer. The use of a flexible foil stamp also allows patterning of curved soft solid surface layers. The other novel feature of the invention relates to the possible use of the flexible patterned foils, obtained from commercially available optical data storage discs, like CDs, DVDs etc. We also demonstrate that it is possible to create complex structures (array of pits and pillars) on the foils of the data disks by programming and subsequent laser burning of specific data onto such disks. When such a foil is used for patterning, it is possible to create complex structures like array of beakers etc. on the soft solid surface layers. The invented method is versatile and is capable of creating variety of structures, which include one dimensional (parallel lines), two dimensional (cross patterns) or complex (arrays of pillars or holes) patterns, from a simple one dimensional stripe patterned stamp on soft solid surface layers.



(19) INDIA


(54) Title of the invention : A PROCESS FOR PREPARING NICKEL BASED NANOCOMPOSITE COATING CONTAINING PARTICLES OF YTTRIA STABILIZED CUBIC XIRCONIA-ALUMINA (NI-YZA) USEFUL FOR TRIBOLOGICAL APPLICATIONS AND NI-YZA NANOCOMPOSITE COATING PREPARED THEREBY



:NA :NA


:NA :NA


:NA :NA


1)COUNCIL OF SCIENTIFIC & INDUSTRIAL RESEARCH Address of Applicant :ANUSANDHAN BHAWAN, RAFI MARG, NEW DELHI-110 001, INDIA Delhi India (72)Name of Inventor :

1)SINGANAHALLI THIPPAREDDY ARUNA 2)VATIA KRISHNA MURTHY WILLIAM GRIPS 3)KARAIKUDI SANKARA NARAYANA RAJAM

(57) Abstract : The present invention provides a novel nickel based nanocomposite coating containing embedded particles of 5 to 20 wt%, 8mol% yttria stabilized cubic zirconia, 80 to 95 wt% alumina (YZA) and a process for preparing the same. Nanosized YZA powder in the present invention is prepared by solution combustion process. Further, this nanoceramic powder is co-deposited with Ni for preparing nanocomposite coating from a nickel sulfamate bath on metal substrates. In the present invention, YZA particles are embedded in the nickel matrix, which have resulted in the improved tribological properties. Present invention also reveals synergistic combination of Ni-YZA, which gives nanocomposite coating having higher microhardness, lower friction coefficient and higher corrosion resistance when compared to Nickel coating.



(19) INDIA


(54) Title of the invention : "AN ORGANIC/POLYMER LOW INFORMATION CONTENT DISPLAY"



:NA :NA


:NA :NA


:NA :NA


1)INDIAN INSTITUTE OF TECHNOLOGY, KANPUR Address of Applicant :KANPUR-208016, AN INDIAN INSTITUTE Uttar Pradesh India (72)Name of Inventor :

1)RAGHUBIR SINGH ANAND 2)ANJALI GIRI 3)RAMESH PRASAD

(57) Abstract : This invention relates to an organic/polymer low information content display comprising layers of patterned ITO/SiO2 coated glass substrate, PEDOT/PSS, HTL, an emissive layer, Electron transmission layer and metal mask wherein the emissive layer is small molecule/ polymer emitting layer and the metal mask configuration may be having common cathode, independent cathode or multiplexed configuration.


(12) PATENT APPLICATION PUBLICATION (21) Application No.1070/CHE/2005 A

(19) INDIA


(54) Title of the invention : "A METHOD FOR ENABLING ACCESS RESTRICTION TO A PERIPHERAL THAT IS CONNECTED TO A NETWORKED PC"

(51) International classification :H04N 7/173


:NA :NA


:NA :NA


:NA :NA


1)SAMSUNG ELECTRONICS CO. LTD., INDIA

SOFTWARE OPERATIONS (SISO) Address of Applicant :J.P. TECHNO PARK, 3/1,MILLERS ROAD, BANGALORE-560 052. Karnataka India (72)Name of Inventor :

1)SUSEELAN BHARGAVI SARIN 2)SAURABH JAIN

(57) Abstract : This invention explains a method for enabling access restriction to a peripheral that is connected to a networked PC wherein a service listens to certain packet sequence from the network and performs the access control for a specified device. The invention is related to remotely imposing access restrictions on a peripheral that is connected to a networked PC. It is meant to enable a system administrator to restrict the use/misuse of certain peripherals that are connected to the PCs present in the network that he/she administrators.



(19) INDIA


(54) Title of the invention : A NATURALLY DERIVED GELLING AGENT AND ITS USES THEREOF IN THE PREPARATION OF PHARMACEUTICAL GELS

(51) International classification :C09K3/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)GOWTHAMARAJAN KUPPUSAMY, Address of Applicant :JSS COLLEGE OF PHARMACY, OOTACAMUND ,THE NILGIRIS, 643001. Tamil Nadu India 2)KULKARNI GIRIRAJ TIRUPATIRAO, 3)MANGAMURI MANOHARAREDDY, 4)MUTHUREDDY NATARAJ SATISH KUMAR, 5)SURESH BHOJRAJ 6)JSS COLLEGE OF PHARMACY, (72)Name of Inventor :

1)GOWTHAMARAJAN KUPPUSAMY, 2)KULKARNI GIRIRAJ TIRUPATIRAO, 3)MANGAMURI MANOHARAREDDY, 4)MUTHUREDDY NATARAJ SATISH KUMAR, 5)SURESH BHOJRAJ, 6)JSS COLLEGE OF PHARMACY,

(57) Abstract : A natural gelling agent suitable for the preparation of medicated gels is disclosed, which allows slow release of the incorporated therapeutic agent from the gel formulation. The gelling agent is a polysaccharide fraction isolated from a natural source, which is used in the development of medicated gels with significant anti-inflammatory property, and plain gel, without therapeutic agent that exhibits wound healing activity, which is comparable with marketed gels.



(19) INDIA




:NA :NA


:NA :NA


:NA :NA


1)GOWTHAMARAJAN KUPPUSAMY, Address of Applicant :JSS COLLEGE OF PHARMACY,OOTACAMUND,THE NILGIRIS, 643 001 Tamil Nadu India 2)KULKARNI GIRIRAJ TIRUPATIRAO, 3)KANNAN ELANGO, 4)SUBBAN SENTHIL KUMAR, 5)SURESH BHOJRAJ 6)JSS COLLEGE OF PHARMACY, (72)Name of Inventor :

1)GOWTHAMARAJAN KUPPUSAMY, 2)KULKARNI GIRIRAJ TIRUPATIRAO, 3)KANNAN ELANGO, 4)SUBBAN SENTHIL KUMAR, 5)SURESH BHOJRAJ, 6)JSS COLLEGE OF PHARMACY,

(57) Abstract : A natural gelling agent suitable for the preparation of medicated gels is disclosed, which allows slow release of the incorporated therapeutic agent from the gel formulation. The gelling agent is a polysaccharide fraction isolated from a natural source, which is used in the development of medicated gels with significant anti-inflammatory property, and plain gel, without therapeutic agent that exhibits wound healing activity which is comparable with marketed gels.



(19) INDIA


(54) Title of the invention : A WATER STORAGE TANK

(51) International classification :E03B11/10 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)JOSE THAIKATTIL, Address of Applicant :THAIKATTIL HOUSE,TIRURANGADI P.O, Kerala India (72)Name of Inventor :

1)JOSE THAIKATTIL,

(57) Abstract : This invention provides a weather shield for a water storage tank and a water storage tank provided with a weather shield, said tank comprising a tank body (B) made of a material such as plastic and an optional cap (D) for closing the mouth of said tank body, said tank body having a base, side wall and a top wall (T) housing the tank mouth (M), characterized in that said weather shield has a canopy (C) capable of being provided over the top of the said tank, said canopy having an opening (N) exposing the said tank mouth (and cap (D)) in the fitted position, said opening (N) on the said canopy preferably capable of being closed by a lid (L). See Fig.2.



(19) INDIA




:NA :NA


:NA :NA


:NA :NA


1)GOWTHAMARAJAN KUPPUSAMY, Address of Applicant :JSS COLLEGE OF PHARMACY,OOTACAMUND,THE NILGIRIS, Tamil Nadu India 2)KULKARNI GIRIRAJ TIRUPATIRAO, 3)THILLAINAYAGAM SUBBURAJU, 4)VIJAYAN POTTEKKAD, 5)SURESH BHOJRAJ 6)JSS COLLEGE OF PHARMACY, (72)Name of Inventor :

1)GOWTHAMARAJAN KUPPUSAMY, 2)KULKARNI GIRIRAJ TIRUPATIRAO, 3)THILLAINAYAGAM SUBBURAJU, 4)VIJAYAN POTTEKKAD, 5)SURESH BHOJRAJ, 6)JSS COLLEGE OF PHARMACY,

(57) Abstract : A natural gelling agent suitable for the preparation of medicated gels is disclosed, which allows slow release of the incorporated therapeutic agent from the gel formulation. The gelling agent is a polysaccharide fraction isolated from a natural source, which is used in the development of medicated gels with significant anti-inflammatory property, and plain gel, without therapeutic agent that exhibits wound healing activity which is comparable with marketed gels.



(19) INDIA


(54) Title of the invention : WINDOW ASSEMBLY WITH FLUID BETWEEN TWO PIECES OF GLASS

(51) International classification :B60J10/00,B29C65/00,B29K19/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA

(87) International Publication No

: NA


:NA :NA


:NA :NA


1)SU,KENG-KUEI, Address of Applicant :7F-2,286-8,SHIN YA ROAD,CHIEN CHEN DISTRICT,KAOHSIUNG,TAIWAN, China (72)Name of Inventor :

1)SU,KENG-KUEI.

(57) Abstract : A window assembly includes two pieces of glass engaged in the window frame and a base is connected to the window frame. A reservoir and a pump are received in the base and a liquid with desired color is received in the reservoir. The liquid is pumped in the gap between the two pieces of glass so as to perform as a curtain.



(19) INDIA


(54) Title of the invention : TIME ZONE SETTING DEVICE

(51) International classification :G06F17/20,17/60 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SU,KENG-KUEI, Address of Applicant :7F-2,NO.286-8, SHIN YA ROAD, CHIEN CHEN DISTRICT, KAOHSIUNG, TAIWAN, China (72)Name of Inventor :

1)SU,KENG-KUEI,

(57) Abstract : A time zone setting watch includes a case with a dial and a circuit board received therein. A display device is located on the dial and an input device is connected to the dial and accessible from outside of the case. A CPU and a memory for storing information of various time zones are connected to a circuit board in the case. A clock generating device and a quartz oscillator are connected to the circuit board, which are operated by buttons on the case of the watch. The user may input instructions by using the buttons to pick a specific information in the memory so as to display the correct time and zone in the display device.



(19) INDIA


(54) Title of the invention : MICRO GAS FLAMMER

(51) International classification :F42B3/10 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SYED MUJEEB UR REHMAN, Address of Applicant :25/12 MOSQUE STREET,3RD FLOOR,CHEPAUK,CHENNAI, Tamil Nadu India (72)Name of Inventor :

1)SYED MUJEEB UR REHMAN,

(57) Abstract : "A Multipurpose micro-gas flammer which is a combination of a micro-gas cylinder, is made of a cast iron mould weighing around 500-600 gms with 80-90 gms of L.P. gas filled in it". In this micro-gas flammer a Bunsen-burner principle is incorporated in an innovative way for mixing of fuel gas with the atmospheric air through the holes at the annular rotatabe ring first then at the stem base of the burner which possesses the same holes at the same height. This fuel gas and air mixture get mixed not only in the long stem above the stem holes but also get mixed at the burner top level. The fuel gas! air mixture which comes out of the ports at the top of the burner, gives a blue flame without smoke when ignited. This flame has a higher thermal effect, higher temperature, smokelless and better fuel consumptio rate. The microgas flammer is very useful in buffet system of food and recipies serving in five star hotels and big lawn party catering. When used without the burner"s top i.e. with tubular open top, it is very much useful in boiling and heating of chemicals and solutions in Medical, Clinical and in chemistry laboratories. Further it is useful for frying of spicies in a small way. Since the microgas flammer is safe, handy and portable it is useful for pinic like occasions to boil water, preparing coffee, tea etc.,



(19) INDIA


(54) Title of the invention : ONE-POT SYNTHESIS FOR THE PREPARATION OF PANTOPRAZOLE AND ITS PHARMACEUTICALLY ACCEPTABLE SALTS

(51) International classification :C07D403/02; C07D403/00


:NA :NA


:NA :NA


:NA :NA


1)MSN Laboratories Limited Address of Applicant :MSN Laboratories Limited, Factory: Sy.No:317 & 323, Rudraram (vil), Patancheru (Mdl), MEDAK (Dist), Andhra pradesh-502329. Andhra Pradesh India (72)Name of Inventor :

1)Manne Satyanarayana Reddy 2)Muppa Kishore Kumar 3)Srinivasan Thirumalai Rajan 4)Karamala Rama Subba Reddy

(57) Abstract : One-Pot Synthesis for the preparation of Pantoprazole and its pharmaceutically acceptable salts Pantaprazole sodium (Formula-I) illustrated as below



(19) INDIA


(54) Title of the invention : A NATURALLY DERIVED RELEASE MODIFIER AND ITS USE THEREOF IN ORAL CONTROLLED RELEASE SPHEROID DRUG DELIVERY SYSTEM


:NA :NA


:NA :NA


:NA :NA


1)KULKARNI GIRIRAJ TIRUPATIRAO, Address of Applicant :JSS COLLEGE OF PHARMACY,OOTACAMUND , THE NILGIRIS , Tamil Nadu India 2)GOWTHAMARAJAN KUPPUSAMY, 3)DHANORKAR YASHWANT, 4)ROHOKALE SHRIRAM, 5)SURESH BHOJRAJ 6)JSS COLLEGE OF PHARMACY, (72)Name of Inventor :

1)KULKARNI GIRIRAJ TIRUPATIRAO, 2)GOWTHAMARAJAN KUPUSAMY, 3)DHANORKAR YASHWANT, 4)ROHOKALE SHRIRAM, 5)SURESH BHOJRAJ, 6)JSS COLLEGE OF PHARMACY,

(57) Abstract : The invention discloses a polysaccharide hydrogel extracted from a natural source, which can be used as release retarding agent in matrix spheroids. The polysaccharide hydrogel allows controlled release of the therapeutic agent incorporated into the spheroid particles. The polysaccharide hydrogel can control the release of therapeutic agent for a prolonged time period, and can enhance the bioavailability of the incorporated therapeutic agent and reduces its dose, which, in turn, reduces the dose-related side-effects of the therapeutic agent.



(19) INDIA


(54) Title of the invention : A NATURALLY DERIVED RELEASE MODIFIER AND ITS USE THEREOF IN ORAL CONTROLLED RELEASE SPHEROID DRUG DELIVERY SYSTEM


:NA :NA


:NA :NA


:NA :NA


1)KULKARNI GIRIRAJ TIRUPATIRAO, Address of Applicant :JSS COLLEGE OF PHARMACY,OOTACAMUND , THE NILGIRIS , Tamil Nadu India 2)GOWTHAMARAJAN KUPPUSAMY, 3)SURESH BHOJRAJ 4)JSS COLLEGE OF PHARMACY, 5)VIJAYAN POTTEKKAD (72)Name of Inventor :

1)KULKARNI GIRIRAJ TIRUPATIRAO, 2)GOWTHAMARAJAN KUPUSAMY, 3)VIJAYAN POTTEKKAD, 4)VIJAYAN POTTEKKAD, 5)SURESH BHOJRAJ, 6)JSS COLLEGE OF PHARMACY,

(57) Abstract : A polysaccharide hydrogel extracted from a natural source, which can be used as release retarding agent in matrix spheroids, is disclosed. The polysaccharide hydrogel allows controlled release of the therapeutic agent incorporated into the spheroid particles. The polysaccharide hydrogel can control the release of therapeutic agent for a prolonged time period, and can enhance the bioavailability of the incorporated therapeutic agent and reduces its dose, which, in turn, reduces the dose-related side-effects of the therapeutic agent.



(19) INDIA


(54) Title of the invention : COAXIAL CABLE ASSEMBLY AND METHOD OF MAKING THE SAME

(51) International classification :H01B11/00 (31) Priority Document No :NA (32) Priority Date :NA (33) Name of priority country :NA (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)SUMITOMO ELECTRIC INDUSTRIES LTD, Address of Applicant :5-33,JITAHAMA 4-CHOME, CHUO-KU, OSAKA-SHI, OSAKA 541-0041, Japan (72)Name of Inventor :

1)SATO,KAZUHIRO, 2)KIKUCHI,HIDEO, 3)ISHIKAWA,TAKUYA,

(57) Abstract : A coaxial cable assembly having superior electrical and mechanical properties is provided. The coaxial cable assembly has a ground bar and a plurality of coaxial cables arranged in a plane, and the coaxial cables each have a center conductor, insulation layer, outer conductor, and jacket. The outer conductor and the insulation layer are exposed at an end portion of each of the coaxial cables, and the outer conductors are turned back to be gathered on one side of the plane and connected to the ground bar. The coaxial cable assembly may include a connector having terminals or a printed circuits board having circuits. The center conductors and the ground bar are electrically connected to each of the terminals or the circuits, respectively.



(19) INDIA


(54) Title of the invention : METHOD AND SYSTEM FOR MANAGING MEMORY

(51) International classification :G06F 1/00 (31) Priority Document No :0421947.3 (32) Priority Date :02/10/2004(33) Name of priority country :U.K. (86) International Application No Filing Date

:NA :NA


:NA :NA


:NA :NA


1)HEWLETT-PACKARD DEVELOPMENT COMAPNY,

L.P Address of Applicant :20555 S.H. 249 HOUSTON, TEXAS 77070 U.S.A. (72)Name of Inventor :

1)KUMAR, MUPIRALLA KISHORE

(57) Abstract : The present invention relates to methods for managing memory. More particularly, but not exclusively, the present invention relates to methods for managing memory across a plurality of partitions. A first method is disclosed which allocates memory across a plurality of partitions and includes the steps of: establishing a pool of free memory 27; allocating some of the free memory 30 to a target partition when required; identifying memory 40 within one or more source partitions to replace the allocated free memory; cleaning 42 the identified memory; and adding the cleaned memory to the pool 50. A second method for allocating memory across a plurality of partitions is also disclosed. The second method includes the steps of: monitoring the workloads of each partition; identifying memory 66 from a lesser-loaded source partition to transfer to a free memory pool; cleaning 67 the identified memory; transferring the cleaned memory to the free memory pool 70; and allocating memory 80 from the free memory pool to a target partition when required. Systems and computer software for managing memory are also disclosed.



(19) INDIA


(54) Title of the invention : NOVEL HETEROCYCLIC ANALOGUS OF BIPHENYL ETHERS



:NA :NA


:NA :NA


:NA :NA


1)ORCHID CHEMICALS & PHARMACEUTICALS LTD Address of Applicant :ORCHID TOWERS, 313, VALLUVAR KOTTAM HIGH ROAD NUNGAMBAKKAM CHENNAI-600034. Tamil Nadu India (72)Name of Inventor :

1)SURENDRAKUMAR SATYANARAYAN PANDEY 2)GAJENDRA SINGH 3)SANTHANA GOPALAN CHITHRA 4)GADDAM OM REDDY

(57) Abstract : The present invention relates to novel compounds of the general formula (I), and their pharmaceutically acceptable salts and compositions. The present invention more particularly provides novel heterocyclic analogs of biphenyl ethers of the general formula (I).



(19) INDIA


(54) Title of the invention : AIR CLEANER

(51) International classification : A47L9/00



:NA :NA


:NA :NA


:NA :NA


1)HONDA MOTOR CO., LTD Address of Applicant :1-1 AOYAMA 2-CHOME MINATO-KU TOKYO 107 8556 Japan (72)Name of Inventor :

1)MORIYAMA, HIROSHI 2)TANIGUCHI, TORU

(57) Abstract : An air cleaner including a casing body (26) and a sealing frame (27) is 5 disclosed. The casing body has a fitting part (39) for allowing engagement of the sealing frame therein. A filter (28) is mounted inside the sealing frame in a tightly contacted relation with the latter. The sealing frame has a groove (47) extending along its outer peripheral surface (44a) and opening on its front surface (42).



(19) INDIA


(54) Title of the invention : A METHOD FOR BEACON EXCHANGE BETWEEN DEVICES WITH ASYMMETRIC LINKS

(51) International classification :H04Q 7/24


:NA :NA


:NA :NA


:NA :NA


1)SAMSUNG ELECTRONICS CO LTD INDIA SOFTWARE

OPERATIONS (SISO) Address of Applicant :J.P TECHNO PARK 3/1 MILLERS ROAD BANGALORE 560 052 Karnataka India (72)Name of Inventor :

1)ARUNAN THENMOZHI

(57) Abstract : A method for identifying devices that have less transmit power capabilities in wireless personal area networks and a mechanism to inform their presence to the other devices in the network. The invention relates to medium access control for wireless personal area networks that are based on distributed MAC protocols. The system and method presented in this invention explains how asymmetric links are identified in MAC protocols that is based on time division multiple access procedure and use periodic beacons to declare that a device is part of a network. The method also alleviates the problems like beacon collision and data slot collision that arise due to links being unidirectional



(19) INDIA


(54) Title of the invention : "STRUCTURE OF MOTORCYCLE"

(51) International classification :B 62 K 11/00



:NA :NA


:NA :NA


:NA :NA


1)HONDA MOTOR CO., LTD Address of Applicant :1-1 MINAMIAOYAMA 2-CHOME, MINATO-KU, TOKYO, Japan (72)Name of Inventor :

1)TSUNODA,KAZUHIKO

(57) Abstract : In a step-through structure of a motorcycle, good knee-gripping is enabled without interrupting a rider from getting on and off. [Means for Resolution] A storage compartment 3 0 is supported by a vehicle body frame 10 in front of a seat 26 with a space for step-through secured with respect to the front end of the seat. The storage compartment 30 includes knee-grip portions 33 (L, R) which extend so as to reduce the distance therebetween toward the rear of the vehicle at positions corresponding to the inner sides of knees or inner thighs of a rider 20 seated on the seat 26. Provided between the storage box 30 and a step floor 23 is a predetermined foot space secured so as to be capable of storing the feet of the rider 20.



(19) INDIA


(54) Title of the invention : ADDITIVES AND LUBRICANT FORMULATIONS FOR IMPROVED ANTIWEAR PROPERTIES



:NA :NA


:NA :NA


:NA :NA


1)AFTON CHEMICAL CORPORATION Address of Applicant :500 SPRING STREET, RICHMOND, VIRGINIA 23219, U.S.A. (72)Name of Inventor :

1)ESCHE, CARL, K., JR 2)DUDDING, CHRISTOPHER, J 3)GROWCOTT, PETER 4)FAGAN, ANTHONY 5)ROBERTSON, ANDREW

(57) Abstract : A lubricated surface and method for reducing wear between metal parts. The lubricated surface contains a base oil of lubricating viscosity and an amount of a hydrocarbon soluble titanium compound effective to provide a reduction in surface wear greater than a surface wear of a lubricant composition devoid of the hydrocarbon soluble titanium compound.


(12) PATENT APPLICATION PUBLICATION (21) Application No.4284/CHENP/2007 A

(19) INDIA


(54) Title of the invention : UNIT DOSAGE FORMS OF TEMOZOLOMIDE


:PCT/US07/14761 :25/06/2007


:NA :NA


:NA :NA


1)SCHERING CORPORATION Address of Applicant :2000 GALLOPING HILL ROAD KENILWORTH NEW JERSEY 07033 U.S.A. (72)Name of Inventor :

1)BERSCH, JACQUELINE, ROSE 2)MANZO, MARK 3)RAMACHANDRA, SUMANT

(57) Abstract : This invention relates to unit dosage forms of temozolomide. These unit dosage forms are particularly well-suited for decreasing the pill burden and increasing patient compliance. The invention also relates to methods of treating proliferative disorders in a patient with these unit dosage forms. The invention additionally relates to kits comprising these unit dosage forms.


(12) PATENT APPLICATION PUBLICATION (21) Application No.3201/KOLNP/2007 A

(19) INDIA


(54) Title of the invention : USE OF 4-AMINOPYRIMIDINES FOR THE PREVENTION OF FUNGAL PESTS NOVEL 4-AMINOPYRIMIDINES METHOD FOR PRODUCTION THEREOF AND AGENTS COMPRISING THE SAME

(51) International classification :A01N 43/54,A01P 3/00

(31) Priority Document No :102005011583.7 (32) Priority Date :10/03/2005 (33) Name of priority country :Germany (86) International Application No Filing Date

:PCT/EP2006/060557 :08/03/2006


:NA :NA

(62) Divisional to Application Number Filing Date

:NA :NA


1)BASF AKTIENGESELLSCHAFT Address of Applicant :67056 LUDWIGSHAFEN Germany (72)Name of Inventor :

1)SCHWOGLER, ANJA 2)RHEINHEIMER, JOACHIM 3)GRAMMENOS, WASSILIOS 4)GROTE, THOMAS 5)HUNGER, UDO 6)MULLER, BERND 7)SCHAFER, PETER 8)SCHIEWECK, FRANK

(57) Abstract : Use of 4-aminopyrimidines of the formula I in which the substituents are as defined below: R1 is hydrogen, halogen, cyano, alkyl, haloalkyl, alkenyl, alkynyl, cycloalkyl, alkoxy, alkoxyalkyl, benzyloxyalkyl, alkoxyalkenyl or alkoxyalkynyl; R2 is hydrogen, halogen, cyano, alkyl, haloalkyl, alkenyl, alkynyl, cycloalkyl, alkoxy, alkoxyalkyl and alkylthioalkyl, where the carbon chains in R1 and/or R2 may be substituted according to the description, R1 and R2 together with the carbon atoms to which they are attached may form a five- to seven-membered ring which may contain one to three identical or different heteroatoms from the group consisting of O, N and S; R3 is hydrogen, halogen, cyano, hydroxyl, mercapto, azido, alkyl, alkenyl, alkynyl, haloalkyl, -O-D, -S(O)m-D, ON=CRaRb, CRc=NORa, NRcN=CRaRb, NRaRb, NRcNRaRb, N0Ra, NRcC(=NRc')NRaRb, NRcC(=O)NRaRb, NRaCN,-NRaC(=O)Rc, NRaC(=NORc)Rc', OC(=O)Ra, C(=NORc)NRaRb, CRc(=NNRaRb), C(=O)NRaRb, C(=O)Ra, CO2Ra, C(=O)NRzRb, C(=O)-N-ORb, C(=S)-NRzRb, C(=NORa)NRzRb, C(=NRa)NRzRb, C(=O)NRa-NRzRb, C(=N-NRzRc)NRaRb, C(=NORb)Ra, C(=N-NRzRb)Ra, CRaRb-ORz, CRaRb-NRzRc, ON(=CRaRb), NRa(C(=O)Rb), NRa(C(=O)ORb), NRa(C(=O)-NRzRb), NRa(C(=NRc)Rb), NRa(N=CRcRb), NRa-NRzRb, -NRz-ORa, NRa(C(=NRc)-NRzRb), NRa(C(=N0Rc)Rb), D is alkyl, alkenyl, alkynyl, haloalkyl, cycloalkyl; a five- or six-membered saturated, partially unsaturated or aromatic mono- or bicyclic heterocycle which contains one to four heteroatoms from the group consisting of O, N and S, one of the groups G1 or G2 where m, x, Ra, Rb, Rc, Rd, Re, Rz, Y, Z are defined according to the description and the aliphatic, alicyclic or aromatic groups R3, Ra,Rb,Rc, Rd or Re may be substituted according to the description; for controlling harmful fungi, novel 4-aminopyrimidines, processes for preparing these compounds and compositions comprising them.



(19) INDIA


(54) Title of the invention : DIHYDROIMIDAZOTHIAZOLE DERIVATIVES


:PCT/GB2006/050031 :08/02/2006


:NA :NA


:NA :NA


1)PROSIDION LIMITED Address of Applicant :WINDRUSH COURT WATLINGTON ROAD, OXFORD OXFORDSHIRE OX4 6LT U.K. (72)Name of Inventor :

1)BARBA, OSCAR 2)DAWSON, GRAHAM JOHN 3)KRULLE, THOMAS MARTIN 4)ROWLEY, ROBERT JOHN 5)SMYTH, DONALD 6)THOMAS, GERARD HUGH

(57) Abstract: Compounds of formula (I): or pharmaceutically acceptable salts thereof, exhibit 5-HT1A agonism in addition to noradrenaline reuptake inhibition and optionally also 5-HT reuptake inhibition are useful for the treatment of obesity.



(19) INDIA


(54) Title of the invention : FLAVORING INGREDIENTS

(51) International classification :A23L 1/226 (31) Priority Document No :PCT/IB2005/000613 (32) Priority Date :04/03/2005 (33) Name of priority country :IB (86) International Application No Filing Date

:PCT/IB2006/050543 :20/02/2006


:NA :NA


:NA :NA


1)FIRMENICH SA Address of Applicant :1, ROUTE DES JEUNES P.O. BOX 239, CH-1211 GENEVA 8 Switzerland (72)Name of Inventor :

1)NAEF, REGULA 2)JAQUIER, ALAIN

(57) Abstract : The present invention relates to a compound of formula (1) wherein R1 is a C2-7 linear alkyl group; which can be used as flavouring ingredient, for instance to impart flavour notes of the green tea and creamy /fatty type as well as a mouthfeel effect



(19) INDIA


(54) Title of the invention : HEATED FOOD PRODUCT WITH COATING OF ENCAPSULATED FLAVOURS

(51) International classification :A23L 1/32, A23G 4/12

(31) Priority Document No :60/651860 (32) Priority Date :10/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/IB2006/050323 :30/01/2006


:NA :NA


:NA :NA


1)FIRMENICH SA Address of Applicant :1, ROUTE DES JEUNES P.O. BOX 239, CH-1211 GENEVA 8 Switzerland (72)Name of Inventor :

1)LE, ANH 2)BARRA, JEROME 3)MAUREL, CATHRINE 4)GORDON JONATHAN, F. 5)CHIAVERINI, MICHAEL 6)NORMAND VALERY

(57) Abstract: The present invention relates to a method for preparing a food product comprising flavours, and for a method for reducing loss of flavours in a flavoured product due to heat treatments. Loss of flavours by evaporation at high temperatures could be prevented by applying coating solutions in which water and encapsulated flavours have been mixed at 0.5% to 30wt.% of capsules based on micro-organisms, a matrix component and encapsulated flavours. The coating solution was applied in high temperature coating processes or processes including heat treatment following the coating step and resulted in surprising retention of flavours in the coated food product.



(19) INDIA


(54) Title of the invention : MULTI-THREADED PACKETING PROCESSING ARCHITECTURE

(51) International classification :G06F 15/173 (31) Priority Document No :11/054076 (32) Priority Date :08/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/000602 :09/01/2006


:NA :NA


:NA :NA


1)CISCO TECHNOLOGY, INC. Address of Applicant :170 WEST TASMAN DRIVE, SAN JOSE CA U.S.A. (72)Name of Inventor :

1)EATHERTON WILL 2)COHEN EARL 3)FINGERHUT ANDY 4)STEISS DONALD E 5)WILLIAMS JOHN

(57) Abstract : A network processor has numerous novel features including a multi-threaded processor array, a multi-pass processing model, and Global Packet Memory (GPM) with hardware managed packet storage. These unique features allow the network processor to perform high-touch packet processing at high data rates. The packet processor can also be coded using a stack-based high-level programming language, such as C or C++. This allows quicker and higher quality porting of software features into the network processor. Processor performance also does not severely drop off when additional processing features are added. For example, packets can be more intelligently processed by assigning processing elements to different bounded duration arrival processing tasks and variable duration main processing tasks. A recirculation path moves packets between the different arrival and main processing tasks. Other novel hardware features include a hardware architecture that efficiently intermixes co-processor operations with multi-threaded processing operations and improved cache affinity.



(19) INDIA


(54) Title of the invention : AUTOMATIC VENDING MACHINE

(51) International classification :G07F 9/00 (31) Priority Document No :2005-032489 (32) Priority Date :09/02/2005 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2006/302025 :07/02/2006


:NA :NA


:NA :NA


1)BLD ORIENTAL, LTD. Address of Applicant :6-45, AOI-CHO 4-CHOME, IZUMISANO-SHI OSAKA Japan (72)Name of Inventor :

1)OCHI YASUSHI

(57) Abstract : The preset invention relates to an automatic vending machine that provides novel services so as to attract the interest of purchasers to promote use of the automatic vending machine. An automatic vending machine (1) is provided with a vending machine main unit (10), with a play device (20) including a stuffed toy (21) on which a user can ride and a drive mechanism (24) for driving the Stuffed toy (21), and with a control device that controls the vending machine main unit (10) and the drive mechanism (24) in the play device (20), wherein the vending machine main unit (10) and the play device (20) are interconnected via the control device. The vending machine main unit (10) includes a product dispensing mechanism ((14a) (14)) for delivering exteriorly product having been previously stocked interiorly, and payment accepting mechanisms ((13a), (13b) (13)) for accepting payment for the item, wherein the control device activates the product dispensing mechanism ((14a (14)) so as to deliver the item to the outside, as well as activates the drive mechanism (24) in the play device (20), when the payment accepted by the payment accepting mechanisms ((13a), (13b) (13)) is equal to the price of the item.



(19) INDIA


(54) Title of the invention : METHOD AND DEVICE FOR MEASURING DOUBLE REFRACTION OF OPTICAL FIBER, METHOD OF MEASURING POLARIZATION MODE DISPERSION OF OPTICAL FIBER AND OPTICAL FIBER

(51) International classification :G01M 11/02 (31) Priority Document No :2005-117030 (32) Priority Date :14/04/2005 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2006/307927 :14/04/2006


:NA :NA


:NA :NA


1)FUJIKURA LTD Address of Applicant :5-1, KIBA 1-CHOME KOHTOH-KU, TOKYO Japan (72)Name of Inventor :

1)GOTO RYUICHIRO 2)MATSUO SHOICHIRO 3)HIMENO KUNIHARU

(57) Abstract : In a method of measurement of the birefringence of an optical fiber, the round-trip Jones matrix R(z) for a first interval (0, z) from a measurement starting point 0 in the optical fiber for measurement to a prescribed position z, and the round-trip Jones matrix R(z+∆z) for a second interval (0, z+∆z) from the measurement starting point 0 to a position z+∆z differing from the position z, are acquired, the eigenvalues ρ1, ρ2 of the matrix R(z+∆z)R(z)-1 are determined, and by computing the following equations (1) and (2), (where Ф represents the phase difference between linear polarization components due to birefringence, ∆n represents birefringence, and λ, represents wavelength), the birefringence in the infinitesimal interval ∆z from the position z to the position z+∆z is obtained.



(19) INDIA


(54) Title of the invention : APTAMER THERAPEUTICS USEFUL IN THE TREATMENT OF COMPLEMENT-RELATED DISORDERS

(51) International classification :A61K 48/00,C12Q 1/68


:PCT/US2006/005215 :14/02/2006


:NA :NA


:NA :NA


1)ARCHEMIX CORP. Address of Applicant :300 THIRD STREET CAMBRIDGE MA U.S.A. (72)Name of Inventor :

1)BENEDICT CLAUDE 2)EPSTEIN DAVID 3)WILSON CHARLES 4)GRATE DILARA 5)KURZ JEFFREY 6)KURZ MARKUS 7)MCCAULEY THOMAS GREEN 8)ROTTMAN JAMES

(57) Abstract : The invention provides nucleic acid therapeutics and methods for using these nucleic acid therapeutics in the treatment of complement-related disorders.



(19) INDIA


(54) Title of the invention : GLUCURONIDATED NEBIVOLOL

(51) International classification :C07H 7/033,A61P 9/00


:PCT/US2006/003253 :30/01/2006


:NA :NA


:NA :NA


1)MYLAN LABORATORIES, INC. Address of Applicant :781 CHESTNUT RIDGE ROAD MORGANTOWN WV U.S.A. (72)Name of Inventor :

1)O'DONNELL JOHN P. 2)OWENS WALTER 3)DUNCAN JOSEPH 4)SHAW ANDREW

(57) Abstract : This invention provides glucuronidated nebivolol metabolites and pharmaceutical compositions of glucuronidated nebivolol for treatment of cardiovascular diseases. In addition, this invention also provides compositions comprising nebivolol and/or at least one glucuronidated metabolite of nebivolol and/or at least one other active compound in a pharmaceutically acceptable carrier. This invention also provides methods of treating and/or preventing vascular diseases, by administering at least one glucuronidated metabolite of nebivolol that is capable of releasing a therapeutically effective amount of nitric oxide to a targeted site affected by the vascular disease.



(19) INDIA


(54) Title of the invention : PHARMACEUTICAL COMPOSITION COMPRISING HYDROXYLATED NEBIVOLOL


:PCT/US2006/003252 :30/01/2006


:NA :NA


:NA :NA


1)MYLAN LABORATORIES, INC. Address of Applicant :781 CHESTNUT RIDGE ROAD MORGANTOWN WV U.S.A. (72)Name of Inventor :

1)O'DONNELL JOHN P. 2)OWENS WALTER 3)DUNCAN JOSEPH 4)SHAW ANDREW 5)WU JINN

(57) Abstract : Hydroxylated nebivolol metabolites increase NO release from human endothelial cell preparations in a concentration dependent fashion following acute administration. In addition, hydroxylated nebivolol metabolites, including but not limited to 4-hydroxy- 6,6'difluoro have the ability to increase the capacity for NO release in human endothelial cells following chronic administration. This invention provides hydroxylated nebivolol metabolites to treat cardiovascular diseases. In addition, this invention provides methods of treating and/or preventing vascular diseases by administering at least one hydroxylated metabolite of nebivolol that is capable of releasing a therapeutically effective amount of nitric oxide to a targeted site affected by the vascular disease.



(19) INDIA


(54) Title of the invention : AQUEOUS INSECTICIDAL COMPOSITIONS AND THE USE THEREOF FOR PROTECTING LIGNOCELLULOSE-CONTAINING MATERIALS

(51) International classification :A01N 25/04,B27K 5/00


:PCT/EP2006/002143 :08/03/2006


:NA :NA


:NA :NA



1)AMRHEIN, PATRICK 2)KLEIST, GUNNAR 3)HAENTZSCHEL, DIRK 4)HABICHT, JOERG 5)SCHOPKE, HOLGER

(57) Abstract : The present invention relates to aqueous insecticide preparations in the form of an aqueous dispersion of finely divided polymer particles which comprise at least one insecticidal organic active ingredient with a solubility in water of not more than 5 g/l at 25ºC at 1013 mbar and which have a mean particle size, determined by dynamic light scattering, of not more than 300 nm, where the polymer particles which comprise the at least one insecticidal active ingredient of a cationic surface charge and where the aqueous dispersion of the active-ingredient-comprising polymer particles is obtainable by subjecting a monomer composition of ethylenically unsaturated monomers M, in which the ethylenically unsaturated monomers M comprise the at least one insecticidal active ingredient in dissolved form, to radical aqueous emulsion polymerization. The invention also relates to the use of such aqueous insecticide compositions for protecting lignocellulosic materials, in particular timber, against attack by harmful insects.



(19) INDIA


(54) Title of the invention : GOAL DETECTOR FOR DETECTION OF AN OBJECT PASSING A GOAL PLANE

(51) International classification :A63B 63/00 (31) Priority Document No :PA200500352 (32) Priority Date :09/03/2005 (33) Name of priority country :Denmark (86) International Application No Filing Date

:PCT/DK2006/000136 :09/03/2006


:NA :NA


:NA :NA


1)GOALREF APS Address of Applicant :AABOGADE 15 DK-8200 AARHUS N Denmark (72)Name of Inventor :

1)ESKILDSEN JORN

(57) Abstract : A system is disclosed for detection of whether a movable object, such as a sports object, e.g. a football or an ice hockey puck, has passed goal plane. It is known to encircle the goal plane with conductors to produce an electromagnetic field to excite signal emitter means in the movable object, alternatively detect the signal emitted by the emitter means. With the present invention these circuits are sectioned into a plurality of separate circuits, which provides an improved spatial resolution of the system in particularly when the movable object is close to the conductors.



(19) INDIA


(54) Title of the invention : A FORESHIP ARRANGEMENT FOR A VESSEL OF THE DEPLACEMENT TYPE

(51) International classification :B63B 1/06 (31) Priority Document No :20051221 (32) Priority Date :09/03/2005 (33) Name of priority country :Norway (86) International Application No Filing Date

:PCT/NO2006/000073 :23/02/2006


:NA :NA


:NA :NA


1)ULSTEIN DESIGN AS Address of Applicant :OSNESVEGEN, N-6067 ULSTEINVIK Norway (72)Name of Inventor :

1)KAMSVAG OYVIND GJERDE

(57) Abstract : A foreship arrangement for a vessel of the displacement type, which foreship consists of the part of the ship in front of the vessel's midship mark (2) and which vessel has a transversely symmetrical hull form about its centre line (CL) and a substantially conventional bow form below its design water line (Tdwl), characterised in that the stem line (1) of the vessel turns substantially backwards in relation to the length direction of the ship from a transition point (B) at or immediately above the design water line (Tdwl).



(19) INDIA


(54) Title of the invention : DETECTION OF GDF-8 MODULATING AGENTS

(51) International classification :G01N 33/74 (31) Priority Document No :60/664400 (32) Priority Date :23/03/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/010723 :23/03/2006


:NA :NA


:NA :NA


1)WYETH Address of Applicant :5 GIRALDA FARMS, MADISON NJ 07940, U.S.A. (72)Name of Inventor :

1)NOWAK JOHN A 2)CRYAN JOHN G 3)MURRAY KRISTIN F 4)RAJEWSKI JOSEPH W 5)SUN SHUJUN 6)WOLFMAN NEIL M

(57) Abstract: Methods to detect GDF-8 modulating agents in animals, including humans, are provided herein, including methods to detect the presence of exogenous GDF-8 modulating agent such as a GDF-8 inhibitor in a biological sample. In particular, methods to assess the presence and/or quantity of a GDF-8 modulating agent in a biological sample are provided.



(19) INDIA


(54) Title of the invention : IMMUNOSUPPRESSIVE AGENT AND ANTI-TUMOR AGENT COMPRISING HETEROCYCLIC COMPOUND AS ACTIVE INGREDIENT

(51) International classification :A61K 31/5377 (31) Priority Document No :2005-069255 (32) Priority Date :11/03/2005 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2006/304937 :13/03/2006


:NA :NA


:NA :NA


1)ZENYAKU KOGYO KABUSHIKIKAISHA Address of Applicant :2-9, NIHONBASHI-MUROMACHI 3-CHOME, CHUO-KU, TOKYO 1030022 , Japan (72)Name of Inventor :

1)HARUTA KAZUHIKO 2)YAGUCHI SHINICHI 3)MATSUNO TOSHIYUKI 4)TSUCHIDA YOSHIO 5)WATANABE TETSUO 6)YOSHIOKA KIMITOMO 7)YUI RYUGO

(57) Abstract : A novel immunosuppressive agent, more specifically an immunosuppressive agent comprising, as an active ingredient, a heterocyclic compound represented by the general formula (I) (wherein X or other variables are as defined in the specification) or a pharmaceutically acceptable salt thereof; a novel heterocyclic compound represented by the general formula (II) (wherein X or other variables are as defined in the specification) or a pharmaceutically acceptable salt thereof; and use of the compound or salt as an antitumor agent.



(19) INDIA


(54) Title of the invention : REAGENTS, METHODS, AND LIBRARIES FOR BEAD-BASED SEQUENCING

(51) International classification :C12Q 1/68 (31) Priority Document No :60/649,294 (32) Priority Date :01/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/003845 :01/02/2006


:NA :NA


:NA :NA


1)AGENCOURT BIOSCIENCE CORP. Address of Applicant :500 CUMMINGS CENTER, SUITE 2450, BREVERLY MASSACHUSETTS 01915 , U.S.A. (72)Name of Inventor :

1)MCKERNAN, KEVIN 2)BLANCHARD, ALAN 3)KOTLER, LEV 4)COSTA, GINA

(57) Abstract: The present invention provides methods for determining a nucleic acid sequence by performing successive cycles of duplex extension along a single stranded template. The cycles comprise steps of extension, legation, and, preferably, cleavage. In certain embodiments the methods make use of extension probes containing phosphorothiolate linkages and employ agents appropriate to cleave such linkages. In certain embodiments the methods make use of extension probes containing an abasic residue or a damaged base and employ agents appropriate to cleave linkages between a nucleoside and an abasic residue and/or agents appropriate to remove a damaged base from a nucleic acid. The invention provides methods of determining information about a sequence using at least two distinguishably labeled probe families. In certain embodiments the methods acquire less than 2 bits of information from each of a plurality of nucleotides in the template in each cycle. In certain embodiments the sequencing reactions are performed on templates attached to beads, which are immobilized in or on a semi-solid support. The invention further provides sets of labeled extension probes containing phosphorothiolate linkages or trigger residues that are suitable for use in the method. In addition, the invention includes performing multiple sequencing reactions on a single template by removing initializing oligonucleotides and extended strands and performing subsequent reactions using different initializing oligonucleotides. The invention further provides efficient methods for preparing templates, particularly for performing sequencing multiple different templates in parallel. The invention also provides methods for performing ligation and cleavage. The invention also provides new libraries of nucleic acid fragments containing paired tags, and methods of preparing microparticles having multiple different templates (e.g., containing paired tags) attached thereto and of sequencing the templates individually. The invention also provides automated sequencing systems, flow cells, image processing methods, and computer-readable media that store computer-executable instructions (e.g., to perform the image-processing methods) and/or sequence information. In certain embodiments the sequence information is stored in a database.



(19) INDIA


(54) Title of the invention : USE OF SILYMARIN AND/OR CONSTITUENTS THEREOF AS SKIN OR HAIR PIGMENTATION PROMOTERS

(51) International classification :A61K 8/49,A61Q 5/00

(31) Priority Document No :05.01446 (32) Priority Date :11/02/2005 (33) Name of priority country :France (86) International Application No Filing Date

:PCT/FR2006/000320 :13/02/2006


:NA :NA


:NA :NA


1)GREENPHARMA Address of Applicant :BIOPOLE CLERMONT-LIMAGNE 63360 SAINT BEAUZIRE, France 2)BIOALTERNATIVES

1 bis rue des Plantes 86160 Gencay, France (72)Name of Inventor :

1)BERNARD PHILIPPE 2)BERNARD FRANCOIS-XAVIER

(57) Abstract : The present invention relates to the use of silymarin, or of the main constituents thereof alone or as a mixture, chosen from silybin (or 2,3-dihydro-3-(4-hydroxy-3- methoxyphenyl)-2-(hydroxymethyl)-6-(3,5,7-trihydroxy-4-oxo- benzopyran-2-yl)benzodioxine), isosilybin, silydianin, silychristin, silandrin, silymonin and taxifolin, isolated enantiomers thereof and also salts thereof, for the manufacture of compositions for inducing, restoring or stimulating pigmentation of the skin, body hair or head hair. The invention also relates to the use of these agents for the manufacture of compositions for preserving the integrity of the hair, for limiting its loss and for stimulating hair regrowth. Silymarin or the constituents thereof alone or as a mixture are obtained by extraction of a plant of the genus Silybum.



(19) INDIA


(54) Title of the invention : TOWER DISPENSER

(51) International classification :B67D 5/56 (31) Priority Document No :11/060,229 (32) Priority Date :17/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/005401 :15/02/2006


:NA :NA


:NA :NA


1)LANCER PARTNERSHIP, LTD. Address of Applicant :6655 LANCER BLVD. SAN ANTONIO, TEXAS 78219 , U.S.A. (72)Name of Inventor :

1)HASKAYNE, PAUL

(57) Abstract: A beverage dispenser includes a tower head disposed atop a tower, and at least one beverage syrup flow path having at least one control module disposed within the tower to regulate the flow of a beverage syrup through the flow path, thereby reducing the size requirements for the tower head. The beverage dispenser may further include additional flow paths to add variable products. The beverage dispenser further includes a control board including at least one input and output device disposed on a top of the beverage dispenser, such that an operator may easily interact with the control board to configure the beverage dispenser. The beverage dispenser may be utilized in a master/slave arrangement, wherein a slave beverage dispenser without a control panel is disposed adjacent to and in communication with the control board of the master beverage dispenser, such that the master beverage dispenser conducts all global and configuration operations.



(19) INDIA


(54) Title of the invention : DEVICE FOR TRANSFERRING A HOLLOW BODY BY MEANS OF A ROTATED DRUM, FROM A SUPPLY CONVEYING SYSTEM TO A DISCHARGE CONVEYING SYSTEM

(51) International classification :B65G 47/84 (31) Priority Document No :10 2005 011 130.0 (32) Priority Date :10/03/2005 (33) Name of priority country :Germany (86) International Application No Filing Date

:PCT/EP2006/002175 :09/03/2006


:NA :NA


:NA :NA

(71)Name of Applicant:

1) SPRIMAG SPRITZMASCHINENBAU GMBH & CO KG Address of Applicant: HENRIETTENSTR. 90, 73230 KIRCHHEIM, Germany (72)Name of Inventor :

1)RAMMINGER DIETMAR

(57) Abstract : The invention relates to a device for the transfer of hollow bodies (A, B), such as cans or tubes, from one incoming means of transport (1) to one outgoing means of transport (5) with one rotary driven drum (2) with transport trays (4) for holding the hollow bodies (A, B) which are provided on the drum (2) swivably around tubes (8) parallel to the drum axis (3) and to which vacuum pressure can be applied, with the transport trays (4) being positively guided along a radial cam (16) to generate a non-uniform transport speed. According to the invention, the transport trays (4) are shiftable on swivable tubes (8) for supplying the vacuum pressure axially and individually movably on intermediate slides (11) in curved paths (13) of the drum (2), with the transport trays (4) being in contact - on the swivable tubes (8) via swivel levers (15) rigidly connected with them - with at least two radial cams (16) for adjustment to the speeds of the incoming and outgoing means of transport (1, 5) at the corresponding transfer points (6, 7).



(19) INDIA


(54) Title of the invention : METHODS AND DEVICES FOR IMPROVING THE MULTIPLE SPANNING TREE PROTOCOL

(51) International classification :H04L 12/28 (31) Priority Document No :60/658804 (32) Priority Date :03/03/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/005982 :22/02/2006


:NA :NA


:NA :NA


1)CISCO TECHNOLOGY, INC. Address of Applicant :170 WEST TASMAN DRIVE, SAN JOSE CA 95134, U.S.A. (72)Name of Inventor :

1)FINN NORMAN

(57) Abstract: The present invention provides improved unicast routing, multicast routing and unicast load sharing as compared with conventional methods. Preferred implementations of the invention provide improvements to IEEE 802.1Q. According to preferred aspects of the invention, each bridge is the root of its own multiple spanning tree instance ("MSTI"). Preferred implementations of the invention require no learning of media access control ("MAC") addresses on the backbone of a network. Some methods of the invention can resolve spanning tree asymmetries. Preferred implementations of the invention require a very low computational load for control protocols.



(19) INDIA


(54) Title of the invention : A METHOD OF TRANSMITTING BROADCAST MESSAGE IN A MOBILE COMMUNICATION SYSTEM

(51) International classification :H04Q 7/20 (31) Priority Document No :102005-0017442 (32) Priority Date :02/03/2005 (33) Name of priority country :Republic of Korea (86) International Application No Filing Date

:PCT/KR2006/000503 :13/02/2006

(87) International Publication No

:WO 2006/093379


:NA :NA


:NA :NA


1)LG ELECTRONICS INC. Address of Applicant :20, YOIDO-DONG, YOUNGDUNGPO-GU, SEOUL 150-721 , Republic of Korea (72)Name of Inventor :

1)AN JONG HOE 2)KIM YOUNG JUN 3)KYUNG CHAN HO

(57) Abstract: A method of transmitting a broadcast message using a Forward Common Control Channel (F-CCCH) in a wireless communication system is disclosed. More specifically, a base station determines whether a periodic enhanced broadcast page is enabled or disabled, and then transmits at least one broadcast message via a first slot of a broadcast paging cycle of the F-CCCH if determined that the periodic enhanced broadcast page is enabled.



(19) INDIA


(54) Title of the invention : METHODS AND APPARATUSES FOR ASSISTING THE PRODUCTION OF MEDIA WORKS AND THE LIKE


:PCT/US2006/004987 :13/02/2006


:NA :NA


:NA :NA


1)TERESIS MEDIA MANAGEMENT, INC. Address of Applicant :800 WEST 1ST, #103, LOS ANGELES, CALIFORNIA 90012, U.S.A. (72)Name of Inventor :

1)DEWITT KERI

Abstract: Systems and methods for assisting one or more users in the production of a media work from a plurality of recordings are disclosed. In an exemplary embodiment, digital versions of the recordings are stored on a file-storage server accessible over a communications network. A media-library server provides an organized way for users to access and view the digital versions, and To associate various data files with the digital versions, such as transcription files, logging files, and storyboard documents. The exemplary media library generates web pages that enable users to search and access the digital versions from an internet browser running on a conventional personal computer. The browser also enables users to view the digital versions with a browser-compatible media viewer.



(19) INDIA


(54) Title of the invention : MULTIPURPOSE MEDIA PLAYERS


:PCT/US2006/005300 :14/02/2006


:NA :NA


:NA :NA


1)TERESIS MEDIA MANAGEMENT, INC. Address of Applicant :800 WEST 1ST, #103, LOS ANGELES, CALIFORNIA 90012, U.S.A. (72)Name of Inventor :

1)DEWITT KERI

(57) Abstract : Disclosed are Multipurpose Media Players that enable users to create transcriptions, closed captions, and/or logs of digitized recordings, that enable the presentation of transcripts, closed captions, logs, and digitized recordings in a correlated manner to users, that enable users to compose one or more scenes of a production, and that enable users to compose storyboards for a production. The multipurpose media players can be embodied within Internet browser environments, thereby providing high availability of the multipurpose players across software platforms, networks, and physical locations



(19) INDIA


(54) Title of the invention : METHODS FOR TREATING POST-SURGICAL PAIN BY MINISTERING A NERVE GROWTH FACTOR ANTAGONIST AND COMPOSITIONS CONTAINING THE SAME

(51) International classification :C07K 16/28 (31) Priority Document No :60/417237 (32) Priority Date :08/10/2002 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2003/32089 :08/10/2003


:NA :NA


:815/KOLNP/2005 :04/05/2005


1)RINAT NEUROSCIENCE CORPORATION Address of Applicant :3155 PORTER DRIVE, PALO ALTO, CA 94304, U.S.A. (72)Name of Inventor :

1)SHELTON DAVID L 2)VERGARA GERMAN J

(57) Abstract: The invention features methods and compositions for preventing or treating pain resulting from surgery or an incision by administering an antagonist of nerve growth factor (NGF). The NGF antagonist may be an anti-NGF (such as anti-hNGF) antibody that is capable of binding hNGF.



(19) INDIA


(54) Title of the invention : TOILET BOWL WATER LEVEL INDICATION

(51) International classification :E03D 1/00 (31) Priority Document No :11/050317 (32) Priority Date :03/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/000871 :11/01/2006


:NA :NA


:NA :NA


1)MJSI, INC. Address of Applicant :612 NICHOLSON STREET, SUITE 115, JOLIET, IL 60435 , U.S.A. (72)Name of Inventor :

1)SCHUSTER MICHAEL J 2)D'AURELIO MICHAEL J

(57) Abstract: Disclosed is a toilet bowl water level gauge and associated methods. In one embodiment, the toilet bowl water level gauge comprises a gauge assembly having a stem with a float, and a sleeve, wherein the stem is inserted in the sleeve and slides through the sleeve. Also, the toilet bowl water level gauge comprises a support attached to the gauge assembly, the support being adapted to engage a rim of a toilet bowl. In addition, bowl level sensors are employed for automated calibration of an automated bowl fill system.



(19) INDIA


(54) Title of the invention : DERIVATIVES OF AMINOBUTANOIC ACID INHIBITING CPT

(51) International classification :C07C 275/16 (31) Priority Document No :RM2005A000090 (32) Priority Date :02/03/2005 (33) Name of priority country :Italy (86) International Application No Filing Date

:PCT/EP2006/001290 :13/02/2006


:NA :NA


:NA :NA


1)SIGMA-TAU INDUSTRIE FARMACEUTICHE RIUNITE

S.P.A. Address of Applicant :VIALE SHAKESPEARE, 47, I-00144 ROME , Italy (72)Name of Inventor :

1)GIANNESSI FABIO 2)TASSONI EMANUELA 3)TINTI MARIA ORNELLA 4)CONTI ROBERTO 5)DELL'UOMO NATALINA 6)BRUNETTI TIZIANA

(57) Abstract : The invention relates to a new class of compounds with action inhibiting carnitine palmitoyl transferase (CPT), pharmaceutical compounds which contain at least one new compound according to the invention, and their therapeutic use in the treatment of hyperglycaemic conditions such as diabetes and the pathologies associated with it, congestive heart failure and obesity.



(19) INDIA


(54) Title of the invention : METHODS FOR DIAGNOSING RCC AND OTHER SOLID TUMORS

(51) International classification :C12Q 1/68 (31) Priority Document No :60/427982 (32) Priority Date :21/11/2002 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2003/037481 :21/11/2003


:NA :NA


:1024/KOLNP/2005 :30/05/2005


1)WYETH Address of Applicant :5 GIRALDA FARMS, MADISON, NJ 07940 , U.S.A. (72)Name of Inventor :

1)TWINE NATALIE C 2)BURCZYNSKI MICHAEL E. 3)TREPICCHIO WILLIAM L 4)DORNER ANDREW J. 5)STOVER JENNIFER A. 6)SLONIM DONNA K.

(57) Abstract: Methods, systems and equipment for diagnosing renal cell carcinoma (RCC) and other solid tumors. This invention identifies numerous disease genes that are differentially expressed in the peripheral blood of patients having RCC or other solid tumors relative to disease-free humans. These disease genes can be used as surrogate markers for detecting the presence or absence of RCC or other solid tumors.



(19) INDIA


(54) Title of the invention : CONTROL OF TOILET BOWL FILL FLOW

(51) International classification :E03D 1/00 (31) Priority Document No :11/050317 (32) Priority Date :03/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/000770 :11/01/2006


:NA :NA


:NA :NA


1)MJSI, INC. Address of Applicant :612 NICHOLSON STREET, SUITE 115, JOLIET, IL U.S.A. (72)Name of Inventor :

1)SCHUSTER MICHAEL J 2)D'AURELIO MICHAEL J

(57) Abstract : Various systems and methods of controlling the flow of water from a fill valve in a toilet tank to a toilet bowl of a toilet using a bowl fill valve are provided. An inlet of the bowl fill valve is coupled to a bowl fill outlet of the fill valve and the outlet of the bowl fill valve is channeled to the toilet bowl. In illustrative embodiment, a method is provided comprising the steps of determining when the toilet tank has been substantially drained of water during a flush cycle, and opening the bowl fill valve for a predefined period of time after the toilet tank has been substantially drained of water to fill the toilet bowl of the toilet with water. The predefined period of time is less than a total time of the flush cycle.



(19) INDIA


(54) Title of the invention : FIBER-REINFORCED COMPOSITE ABSORBABLE ENDOURETERAL STENT

(51) International classification :A61F 2/06 (31) Priority Document No :60/650240 (32) Priority Date :04/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/003619 :02/02/2006


:NA :NA


:NA :NA


1)POLY-MED, INC. Address of Applicant :6309 HIGHWAY 187, ANDERSON, SOUTH CAROLINA U.S.A. (72)Name of Inventor :

1)SHALABY SHALABY W 2)CLINKSCALES KENNETH

(57) Abstract : Absorbable/disintegratable endourological stents, specifically endoureteral stents, and applicators for their introduction into the biological site, are formed from fiber-reinforced elastomeric films configured to prevent their migration from the application site.



(19) INDIA


(54) Title of the invention : HERBICIDAL SUSPENSION

(51) International classification :A01N 47/36 (31) Priority Document No :2005-072034 (32) Priority Date :14/03/2005 (33) Name of priority country :Japan (86) International Application No Filing Date

:PCT/JP2006/303918 :23/02/2006


:NA :NA


:NA :NA


1)ISHIHARA SANGYO KAISHA, LTD. Address of Applicant :3-15 EDOBORI 1-CHOME NISHI-KU, OSAKA-SHI, OSAKA Japan (72)Name of Inventor :

1)YOSHII HIROSHI 2)ISHIHARA YOSHIAKI 3)YAMADA RYU 4)TSURUTA TATSUHIKO

(57) Abstract : A herbicidal suspension comprising (1) a sulfonylurea compound or its salt as a herbicidal component, (2) at least one surfactant selected from the group consisting of an alkoxylated sorbitol fatty acid ester and an alkoxylated sorbitan fatty acid ester, and (3) a water-immiscible diluent. A method for controlling undesired plants or inhibiting their growth, which comprises applying a herbicidally effective amount of the herbicidal suspension to the undesired plants or to a place where they grow.



(19) INDIA


(54) Title of the invention : INDUCTION COIL UNIT

(51) International classification :H05B 6/10,B23B 31/02


:PCT/EP2006/001104 :08/02/2006


:NA :NA


:NA :NA


1)HAIMER GMBH Address of Applicant :WEIHERSTR.21, 86568 HOLLENBACH-IGENHAUSEN Germany (72)Name of Inventor :

1)HAIMER, FRANZ 2)HODEK, JOSEF 3)PODHRAZKY, ANTONIN

(57) Abstract : An induction coil unit (1) is proposed for shrinking tools into and out of a sleeve part (3) of a tool holder, in which a plurality of pole pieces (25), which are arranged distributed in the cirumferential direction, and are composed of soft-magnetic material, are arranged such that they can be moved radially in a yoke ring composed of soft-magnetic material. The pole pieces have end surfaces (29) which run at an angle to the rotation axis (7) of the sleeve part (3) and can be brought into linear touching contact with the conical circumferential surface (31) of the sleeve part (3) which holds the tool (11) with an interference fit. In order to avoid local overheating of the sleeve part (3) an area (39) of the end surface (29) which is parallel to the axis is connected to the area (33) of the end surface (29) that is inclined with respect to the rotation axis (7), on the tool outlet side of the sleeve part (3).



(19) INDIA


(54) Title of the invention : CLOSURE SYSTEM WITH IMPROVED SEALING OF LID

(51) International classification :B65D 41/18 (31) Priority Document No :11/066,751 (32) Priority Date :25/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/001744 :19/01/2006


:NA :NA


:NA :NA


1)SEAQUIST CLOSURES FOREIGN, INC Address of Applicant :475 WEST TERRA COTTA, CRYSTAL LAKE ILLINOIS U.S.A. (72)Name of Inventor :

1)HICKS, MARGE, M 2)BEILKE, STACY 3)JELICH, NICHOLAS, J 4)BLOMDAHL, CORI, M 5)SMITH, KELLY, A

(57) Abstract : A closure system (30) is provided with a peripheral wall (32) (e.g., as defined either by a top portion of a container for extending from, and defining, an opening or as defined by a separate closure body for extending from a container). The peripheral wall (32) has a laterally inwardly extending sealing member (60). A lid (34) is provided for being moved from an open position to a closed position on the peripheral wall (32). The lid (34) has a flange (100) with a peripheral sealable surface (102) for being engaged by the sealing member (60) of the peripheral wall (32) to effect a seal.



(19) INDIA


(54) Title of the invention : BIPHENYL-N-(4-PYRIDYL) METHYLSULFONAMIDES

(51) International classification :A01N 43/40 (31) Priority Document No :60/662411 (32) Priority Date :16/03/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/EP2006/060753 :15/03/2006


:NA :NA


:NA :NA



1)GRAMMENOS, WASSILIOS 2)RHEINHEIMER, JOACHIM 3)LOHMANN JAN KLAAS 4)GROTE THOMAS 5)PUHL MICHAEL 6)KORADIN CHRISTOPHER 7)BAUMANN ERNST 8)VON DEYN WOLFGANG 9)LANGEWALD JURGEN 10)GOTZ NORBERT 11)CULBERTSON DEBORAH L 12)ANSPAUGH DOUGLAS D 13)OLOUMI-SADEGHI HASSAN 14)COTTER HENRY VAN TUYL 15)KUHN DAVID G

(57) Abstract : Biphenylsulfonamides of the formula (I) and the N-oxides and the agriculturally acceptable salts and the veterinarily acceptable salts of the compounds I, a process for preparing these compounds, compositions comprising them, their use for controlling phytopathogenic harmful fungi and harmful arthropodes, a method for combating arthropodal pests, a method for protecting crops from attack or infestation of arthropodal pests, a method for protecting seed and non-living materials from infestation by arthropodal pests, a method for protecting non-living materials from attack or infestation by arthropodal pests and seed comprising the compounds I.



(19) INDIA


(54) Title of the invention : CONVERTIBLE TRACTION SHOES

(51) International classification :A43C 15/00 (31) Priority Document No :11/053,590 (32) Priority Date :07/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/004051 :06/02/2006


:NA :NA


:NA :NA


1)SELECT SOLE, LLC Address of Applicant :15031 SW TELLURIDE CT. BEAVERTON, OREGON U.S.A. (72)Name of Inventor :

1)FOGARTY, STACY 2)O'BRIEN, PATRICK 3)O'BRIEN, JOHN

(57) Abstract : A convertible shoe having a shoe body and a shoe sole. An air channel formed in said shoe sole including pressurized air inlet and air exhaust. An elongated pocket or multiple individual pockets in the bottom of the shoe sole and along said air channel. A flexible wall portion between said air channel and pocket that expands into the pocket(s) upon pressurization of said air channel. A protrusion affixed to said flexible wall portion and which extends out of said pocket and into engagement with a support surface when said air channel is pressurized.



(19) INDIA


(54) Title of the invention : APROTININ POLYPEPTIDES FOR TRANSPORTING A COMPOUND ACROSS THE BLOOD-BRAIN-BARRIER

(51) International classification :C12N 15/15 (31) Priority Document No :60/653928 (32) Priority Date :18/02/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/CA2005/001158 :21/07/2005


:NA :NA


:NA :NA


1)ANGIOCHEM INC. Address of Applicant :141 PRESIDENT KENNEDY AVENUE, SUITE SB-5210, MONTREAL QUEBEC H2X 3Y7 Canada (72)Name of Inventor :

1)BELIVEAU RICHARD 2)DEMEULE MICHEL 3)CHE CHRISTIAN 4)REGINA ANTHONY

(57) Abstract : The invention relates to improvements in the field of drug delivery. More particularly, the invention relates to polypeptides derived from aprotinin and from aprotinin analogs as well as conjugates and pharmaceutical compositions comprising these polypeptides or conjugates. The present invention also relates to the use of these polypeptide for transporting a compound or drug across the blood-brain barrier of a mammal and in the treatment and diagnosis of neurological diseases.



(19) INDIA


(54) Title of the invention : POWER OR COMMUNICATIONS CABLE WITH FLAME RETARDANT POLYMER LAYER

(51) International classification :C08L 21/00,H01B 3/44

(31) Priority Document No :05 003 931.2 (32) Priority Date :23/02/2005



:PCT/EP2006/001618 :22/02/2006

(87) International Publication No :WO/2006/089735 (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA


1)BOREALIS TECHNOLOGY OY Address of Applicant :P. O. BOX 330, FIN-06101, PORVOO Finland (72)Name of Inventor :

1)SULTAN, BERNT-AKE 2)JUNGKVIST, JONAS 3)ANDREASON, URBAN 4)AHLSTRAND, LARS-ERIK

(57) Abstract : The present invention in a first embodiment relates to a conduit or automotive wire consisting of an inner conductor core surrounded by a flame retardant layer made of a polymer composition in a continuous process which composition comprises (A) an olefin homo- and/or copolymer, (B) a silicone-group containing compound, and (C) an inorganic filler, wherein the ratio of the MFR2 measured under a load of 2.16 kg and at a temperature of 190 °C of component (A) to the MFR2 measured under a load of 2.16 kg and at a temperature of 190 °C of the composition is higher than 3.5, and the wire has a length of at least 100 m. In a second embodiment, the present invention relates to a power or communications cable or wire comprising a flame retardant layer made of a polymer composition comprising (A) an olefin homo- and/or copolymer, (B) a silicone-group containing compound, and (C) an inorganic filler, wherein the ratio of the MFR2 measured under a load of 2.16 kg and at a temperature of 190 °C of component (A) to the MFR2 measured under a load of 2.16 kg and at a temperature of 190 °C of the composition is higher than 3.5, the cable or wire further comprising at least one further layer.



(19) INDIA


(54) Title of the invention : METHOD AND APPARATUS FOR PROVIDING CONGESTION AND TRAVEL TIME INFORMATION TO USERS

(51) International classification :G01C 21/00,G08G 1/00


:PCT/KR2007/000185 :10/01/2007


:NA :NA


:NA :NA


1)LG ELECTRONICS INC. Address of Applicant :20, YOIDO-DONG, YOUNGDUNGPO-GU, SEOUL Republic of Korea (72)Name of Inventor :

1)KIM YOUNG IN 2)SEO CHU HYUN 3)LEE JOON HWI 4)KIM SEUNG WON

(57) Abstract : Processing link information related to traffic and travel information, in which link information is received including a link identification value associated with a particular link, a link identifier component enabling a determination of a link system to be employed in identifying the particular link referenced by the received traffic information, and a location type information component enabling a determination of a link location type of the particular link. Based upon the received information, a link system to be used to identify the particular link is determined. In addition, the link location type and the link identification are determined.



(19) INDIA


(54) Title of the invention : LIVE ATTENUATED ROTAVIRUS VACCINE FOR ORAL ADMINISTRATION

(51) International classification :A61K 39/15,A61P 1/00

(31) Priority Document No :0503337.8 (32) Priority Date :17/02/2005 (33) Name of priority country :U.K. (86) International Application No Filing Date

:PCT/EP2006/001442 :15/02/2006


:NA :NA


:NA :NA


1)GLAXOSMITHKLINE BIOLOGICALS S.A. Address of Applicant :RUE DE L'INSTITUT 89, B-1330 RIXENSART Belgium (72)Name of Inventor :

1)VANDE VELDE VINCENT

(57) Abstract : The invention provides liquid rotavirus formulations that are suitable for oral administration to human infants. In particular the invention provides pharmaceutical compositions and vaccines, comprising a rotavirus antigen, a sugar and a carboxylate wherein said formulation has a pH of between pH 5.0 and pH 8.0 and comprises no phosphate or less than 5 mM phosphate. The invention also provides methods of preparing said rotavirus formulations and use thereof in the prevention or treatment of rotavirus associated diseases in humans.



(19) INDIA


(54) Title of the invention : USE OF LEPTIN FOR THE PREVENTION OF EXCESS BODY WEIGHT AND COMPOSITION CONTAINING LEPTIN

(51) International classification :A61K 38/22,A23L 1/29

(31) Priority Document No :P200500408 (32) Priority Date :23/02/2005 (33) Name of priority country :Spain (86) International Application No Filing Date

:PCT/ES2006/000064 :15/02/2006


:NA :NA


:NA :NA


1)UNIVERSITAT DE LES ILLES BALEARS Address of Applicant :CTRA. DE VALLDEMOSSA KM. 7,5. EDIFICI SON LLEDO, E-07122 PALMA DE MALLORCA ISLAS BALEARES Spain (72)Name of Inventor :

1)PALOU OLIVER ANDREU 2)PICO POU CATALINA 3)OLIVER VARA PAULA 4)SANCHEZ ROIG JOANA 5)MIRALLES BORRACHINA, OLGA

(57) Abstract : The invention relates to the use of leptin in the preparation of an ingestible composition for children from nursing infants to adolescents, comprising leptin at a concentration greater than 50 ng/kg for the prevention of excess weight and/or the complications associated therewith. The invention comprises the use of a fully or partially hydrolyzed recombinant leptin. Said ingestible composition is a supplement for developmental nutrition, contains between 0.1 and 30 micrograms/liter leptin, provides a daily dose of leptin of more than 25 ng and can take the form of a solid, i.e, a tablet, capsule or reconstitutable powder, or a liquid, i.e., a syrup or drink.



(19) INDIA


(54) Title of the invention : SYSTEM FOR USING ELECTRONIC DEVICE AND THE ELECTRONIC DEVICE

(51) International classification : G06F 15/173 , G06F 19/00 , G06Q 99/00

(31) Priority Document No :PI0601492-5 (32) Priority Date :12/04/2006 (33) Name of priority country :Brazil (86) International Application No Filing Date

:PCT/BR06/000279 :14/12/2006

(87) International Publication No : WO/2007/115383 (61) Patent of Addition to Application Number Filing Date

:NA :NA


:NA :NA


1)TEC TOY S.A. Address of Applicant :AV. FRANCISCO MATARAZZO, 404-2˚ ANDAR SAO PAULO-SP-CEP Brazil (72)Name of Inventor :

1)NORMAND REINALDO OLIVEIRA

(57) Abstract : The present invention refers to a system for using the electronic device comprising a billing server, a data storage server and a delivery platform (hardware and software) for delivering games, applications and value added services (Internet navigation, news, virtual communities, movies, music, etc) upon the requests of the electronic device user. The electronic device uses the architecture of a mobile handset for running the games and services. The purchase and downloading of games may be carried out with the same technology used by mobile carriers, but not only necessarily through them. Other wireless and wired transmission mechanisms and methods may be used.



(19) INDIA


(54) Title of the invention : TOOTHBRUSH

(51) International classification :A46B 9/04, A46B 5/00


:PCT/EP2006/001770 :21/02/2006


:NA :NA


:NA :NA


1)GLAXOSMITHKLINE CONSUMER HEALTHCARE

GMBH & CO KG Address of Applicant :BUSSMATTEN 1,77815 BUEHL (BADEN) Germany (72)Name of Inventor :

1)KNIESE LEIF

(57) Abstract : A toothbrush (1) with a cleaning zone (4) on which tooth-cleaning elements (5) are arranged, which are pressed against the teeth (27) during cleaning with a cleaning force (F), and with a deformable element (6) by which the cleaning zone (4) is can be adapted to the shape of the tooth surface (27) by the cleaning force (F), where the deformable element (6) has at least a first flexible wing facing towards the cleaning zone (4) and a second such wing facing away from the cleaning zone (4) (8, 9,108, 109), and also at least one guide element (10, 110), and where the first and second wings (8, 9, 108, 109) are held together moveably by the guide element (10, 110). In order to provide an improved toothbrush which cleans the teeth more effectively and at the same time more gently, it is provided according to the invention that the wings (8, 9,108,109) form a wedge, by being connected together at one end (11) and distanced from each other at the other end (12).



(19) INDIA


(54) Title of the invention : USE OF A PYRAZOLE DERIVATIVE FOR PREPARING MEDICINES USEFUL FOR PREVENTING OR TREATING RENAL DISEASES

(51) International classification :A61K 31/454 (31) Priority Document No :0501919 (32) Priority Date :23/02/2005 (33) Name of priority country :France (86) International Application No Filing Date

:PCT/FR2006/000369 :17/02/2006


:NA :NA


:NA :NA


1)SANOFI-AVENTIS Address of Applicant :174, AVENUE DE FRANCE, F-75013 PARIS France (72)Name of Inventor :

1)BENSAID MOHAMMED 2)HERBERT, JEAN-MARC 3)JAINAK PHILIP

(57) Abstract : The invention concerns the use of a cannabinoid CBl receptor antagonist compound, alone or combined with another active principle, derived from pyrazole, for preparing drugs useful for preventing and treating renal diseases.



(19) INDIA


(54) Title of the invention : 7-(2-(4-(3-TRIFLUOROMETHYL-PHENYL)-1,2,3,6-TETRAHYDRO-PYRID-1-YL)ETHYL) ISOQUINOLINE BESYLATE SALT, PREPARATION AND THERAPEUTIC USE THEREOF

(51) International classification :C07D 401/06 (31) Priority Document No :05/02,611 (32) Priority Date :17/03/2005 (33) Name of priority country :France (86) International Application No Filing Date

:PCT/FR2006/000566 :15/03/2006


:NA :NA


:NA :NA



1)BARRE CORINNE 2)MONNIER OLIVER

(57) Abstract : The invention concerns 7-(2-(4-(3-trifluoromethyl-phenyl)-l,2,3,6-tetrahydro-pyrid-l-yl)ethyl) isoquinoline besylate salt. The invention also concerns a method for preparing 7-(2-(4-(3-trifluorormethyl-phenyl)-l,2,3,6-tetrahydro-pyrid-l-yl)ethyl) isoquinoline besylate salt, as well as the therapeutic use thereof.



(19) INDIA


(54) Title of the invention : USE OF RIMONABANT FOR THE PREPARATION OF MEDICAMENTS THAT CAN BE USED IN THE PREVENTION AND TREATMENT OF TYPE 2 DIABETES

(51) International classification :A61K 31/454 (31) Priority Document No :05/01861 (32) Priority Date :21/02/2005 (33) Name of priority country :France (86) International Application No Filing Date

:PCT/FR2006/000376 :20/02/2006


:NA :NA


:NA :NA



1)HANOTIN, CORINNE 2)ROSENZWEIG PIERRE

(57) Abstract : The invention relates to the use of rimonabant, either alone or combined with another active principle, for the preparation of medicaments that can be used in the prevention and treatment of type 2 diabetes or non-insulin dependent diabetes and/or the complications thereof.



(19) INDIA


(54) Title of the invention : NOVEL IMIDAZO[1,5-A]PYRIDINE DERIVATIVES, METHOD FOR PREPARING SAME AND PHARMACEUTICAL COMPOSITIONS CONTAINING SAME

(51) International classification :C07D 471/04 (31) Priority Document No :05/02,590 (32) Priority Date :16/03/2005 (33) Name of priority country :France (86) International Application No Filing Date

:PCT/FR2006/000567 :15/03/2006


:NA :NA


:NA :NA


1)SANOFI-AVENTIS Address of Applicant :174, AVENUE DE FRANCE, F-75013, PARIS France (72)Name of Inventor :

1)ALCOUFFE CHANTAL 2)BADORC ALAIN 3)BONO FRANCOISE 4)BORDES MARIE-FRANCOISE

(57) Abstract : The invention concerns compounds of formula I, wherein: R represents H, a halogen, an alkyl, a hydroxy, an alkoxy, a -COOR6, -NR4R5, -NH-SO2-Alk, -NH-CO-Alk, -NR6-CO2-Alk, -0-Alk-COOR6, ,0-Alk-NR4R5, -O-(CH2)n-Ph, -CO-NR4R5 or -CO-NH-CH(R7)-(CH2)m-COOR6 radical; R1 represents H, a halogen, a cyano a -COOR6, -NR4R5, -NH-SO2-Alk, -NH-CO-CF3, -NH-CO-Ph, -NH-CO-Alk, -NH-CO2-Alk, -CONR4R5 radical, an optionally substituted phenyl or an optionally substituted heteroaryl; R2 and R3 independently of each other represent a hydroxy, an alkoxy, a -COOR6, a nitro, -NR4R5, -NH-CO-Alk, -NH-CO-Ph, -NH-CO2-Alk, -NH-SO2-alk, -CO-NR4R5 or -CO-NHOH; or R2 and R3 form together, with the carbon atoms of the phenyl ring to which they are bound a 6-membered carbon-containing, ring, comprising a nitrogen atom and another heteroatom such as oxygen; in base or salt form, as well as in hydrate or solvate form. The invention also concerns a method for preparing said compounds, pharmaceutical composition containing same and the therapeutic uses thereof.



(19) INDIA


(54) Title of the invention : METHOD AND APPARATUS FOR IDENTIFYING AND CATALOGING SOFTWARE ASSETS


:PCT/US2006/004421 :09/02/2006


:NA :NA


:NA :NA


1)BLAZENT, INC. Address of Applicant :1820 GATEWAY DRIVE, SUITE 200, SAN MATEO, CALIFORNIA 94404, U.S.A. (72)Name of Inventor :

1)BURNLEY CHRISTOPHER 2)SHEN JIAN 3)GERHOLD BRIAN 4)LING JOHN

(57) Abstract : A method and apparatus are disclosed for identifying and cataloging software assets contained on a networked computer. In accordance with one embodiment, there is provided a method comprising providing a data warehouse including a master catalog file. The master catalog file comprises a software items table of attributes, a software packages table of attributes, and a mapping rules table for mapping certain software item entries to certain software package entries.



(19) INDIA


(54) Title of the invention : SYSTEM FOR THE TREATMENT OF POWDERED MATERIAL

(51) International classification :B01J 2/16 (31) Priority Document No :BO2005A000094 (32) Priority Date :23/02/2005 (33) Name of priority country :Italy (86) International Application No Filing Date

:PCT/IB2006/000356 :02/02/2006


:NA :NA


:NA :NA


1)I.M.A. INDUSTRIA MACCHINE AUTOMATICHE S.P.A. Address of Applicant :VIA EMILIA LEVANTE, 428-442, I-40064 OZZANO EMILIA (BOLOGNA) Italy (72)Name of Inventor :

1)TREBBI ROBERTO 2)GASPERINI ELVIO 3)MARCHESCHI VITTORIANO

(57) Abstract : A system (1) for the treatment of powdered material, in particular pharmaceutical powders, comprising, with the possibility of suitable connection between them using pipe means (4), at least a first operating unit (2) designed for mixing the powdered material with other substances to obtain a predetermined mixture, and at least a second operating unit (3) designed for subjecting the mixture to a fluid bed type treatment. The first unit (2) is supported in such a way that it is mobile relative to the second unit (3); there being means (8, 7, 13) for supporting and moving the first unit (2), for moving the first unit (2) alternatively in a predetermined direction (F) relative to the second unit (3), between a first and a second operating position (A, B).



(19) INDIA


(54) Title of the invention : DEVICE FOR DISPENSING GAS-LIQUID MIXTURES

(51) International classification :B05B 11/00 (31) Priority Document No :VI2005A000053 (32) Priority Date :25/02/2005 (33) Name of priority country :Italy (86) International Application No Filing Date

:PCT/IB2006/000336 :22/02/2006


:NA :NA


:NA :NA


1)TAPLAST S.P.A. Address of Applicant :VIA MAROSTICANA, 65/67 I-36030 DUEVILLE (VI) Italy (72)Name of Inventor :

1)SANTAGIULIANA STEFANO

(57) Abstract : The invention concerns a device (1, 100, 101, 102, 103, 104, 105) for dispensing gas-liquid mixtures that can be associated with a container (C) of a liquid (L), comprising: suction means (2) suited to be moved from a first rest position to a second position in order to draw the liquid (L); a mixing chamber (3) communicating with the suction means (2), so that when the suction means are moved from the first position to the second position the liquid (L) is drawn and conveyed into the mixing chamber (3); compression means (5) for a gas (7). The compression means (5) comprise two chambers (5a, 5b) suited to contain the gas (7), communicating with the mixing chamber (3), so that when the suction means (2) are moved from the first to the second position part of the gas is conveyed into the mixing chamber (3).



(19) INDIA


(54) Title of the invention : SHUTDOWN METHODS AND DESIGNS FOR FUEL CELL STACKS

(51) International classification :H01M 8/04 (31) Priority Document No :60/661,191 (32) Priority Date :11/03/2005 (33) Name of priority country :U.S.A. (86) International Application No Filing Date

:PCT/US2006/009128 :13/03/2006


:NA :NA


:NA :NA


1)BALLARD POWER SYSTEMS INC. Address of Applicant :4343 NORTH FRASER WAY, BURNABY BRITISH COLUMBIA V5J 5J9 Canada (72)Name of Inventor :

1)BRADEAN RADU P. 2)HAAS HERWIG R. 3)RICHARDS CHRISTOPHER J. 4)ADAM DAVID D. L.

(57) Abstract : Improved water distribution can be obtained within the cells of a fuel cell series stack by maintaining a suitable temperature difference between the cathode and anode sides of each cell in the stack during shutdown. This can be accomplished by thermally insulating the "hot" end and sides of the stack and by providing a thermal mass adjacent to the "hot" end.



(19) INDIA


(54) Title of the invention : USE OF 2-(2-NITRO-4-TRIFLUOROMETHYLBENZOYL)-1,3-CYCLOHEXANEDIONE IN THE TREATMENT OF PARKINSON’S DISEASE

(51) International classification :A61K 31/122 (31) Priority Document No :0504103.3 (32) Priority Date :28/02/2005 (33) Name of priority country :Great Britain (86) International Application No Filing Date

:PCT/GB2006/000684 :27/02/2006


:NA :NA


:NA :NA


1)SYNGENTA LIMITED Address of Applicant :EUROPEAN REGIONAL CENTRE, PRIESTLEY ROAD, SURREY RESEARCH PARK GUILDFORD, SURREY GU2 7YH, GREAT BRITAIN. (72)Name of Inventor :

1)DOE JOHN ERNEST 2)STURGESS NICHOLAS CRISPINIAN 3)TRAVIS KIM ZACHARY

(57) Abstract : The present invention relates to, inter alia, the use of 2-(2-Nitro-4- Trifluoromethylbenzoyl)-1,3-Cyclohexanedione (compound 2) in the treatment of a neurodegenerative disease, such as Parkinson's disease. The invention also relates to the use of the compound depicted as compound 2 or a pharmaceutically acceptable salt thereof, in the manufacture of a medicament for use in the treatment of a neurodegenerative disease such as Parkinson's disease.



(19) INDIA


(54) Title of the invention : SOLID REDISPERSIBLE EMULSION

(51) International classification :B01J 2/08,C11D 17/00


:PCT/EP2006/062019 :03/05/2006


:NA :NA


:NA :NA


1)DEGUSSA GMBH Address of Applicant :BENNIGSENPLATZ 1, 40474 DUSSELDORF Germany (72)Name of Inventor :

1)WENK, HANS HENNING 2)SCHICK, GEORG 3)JOHN, KATHRIN

(57) Abstract : The invention relates to a solid redispersible emulsion, which is comprised of an oil-in- water emulsion consisting of a laundry care constituent, which is encapsulated in an enclosure. This enclosure is stabilized by polyvalent metal ions and, initially, is water- insoluble and is rendered soluble by adding metal ions. The enclosure materials is preferably a biodegradable material and in particular, a polysaccharide, such as alginates, pectins or carrageenans. These solid and redispersible emulsions are used, in particular, in laundry care products.



(19) INDIA


(54) Title of the invention : SELECTIVE SEROTONIN 2A/2C RECEPTOR INVERSE AGONISTS AS THERAPEUTICS FOR NEURODEGENERATIVE DISEASES


:PCT/US2004/001234 :15/01/2004


:NA :NA


:1635/KOLNP/2005 :16/08/2005


1)ACADIA PHARMACEUTICALS INC. Address of Applicant :3911 SORRENTO VALLEY BLVD. SAN DIEGO, CA 92121-1402, U.S.A. (72)Name of Inventor :

1)WEINER, DAVID, M 2)DAVIS, ROBERT, E 3)BRANN, MARK, R

(57) Abstract : Behavioral pharmacological data with the compound of formula (I), a novel and selective 5HT2A/2C receptor inverse agonist, demonstrate in vivo efficacy in models of psychosis and dyskinesias. The includes activity in reversing MK - 801 induced locomotor behaviors, suggesting that this compound may be an efficacious antipsychotic, and activity in an MPTP primate model of dyskinesias, suggesting efficacy as an anti-dyskinesia agent. These data support the hypothesis hat 5HT2A/2C receptor inverse agonism may confer antipsychotic and anti-dyskinetic efficacy in humans, and indicate a use of the compound of formula (I) and related agents as novel therapeutics for Parkinson's Disease, related human neurodegenerative diseases, and psychosis.



(19) INDIA


(54) Title of the invention : LOSSLESS ENCODING OF INFORMATION WITH GUARANTEED MAXIMUM BITRATE

(51) International classification :H03M 7/40, H03M 7/30


:PCT/EP2006/001296 :13/02/2006


:NA :NA


:NA :NA


1)FRAUNHOFER-GESELLSCHAFT ZUR FOERDERUNG

DER ANGEWANDTEN FORSCHUNG E.V. Address of Applicant :HANSASTRASSE 27C 80686 MUNCHEN Germany (72)Name of Inventor :

1)RALPH SPERSCHNEIDER 2)JUERGEN HERRE 3)KARSTEN LINZMEIER 4)JOHANNES HILPERT

(57) Abstract : A compact encoded representation of information values not exceeding a predefined size can be derived when a first encoding rule generating an encoded representation of the information values of variable length is compared to a second encoding rule generating an encoded representation of the information values of fixed length and when the encoding rule resulting in the encoded representation requiring the lower number of information units is chosen. Thus, the maximum bit rate can be guaranteed to be at least the maximum bit rate of the second encoding rule deriving the second encoded representation. Signaling the choice of the encoding rule by some rule information together with the encoded representation of the information values, the correct information values can later on be derived on a decoder side, using a decoding rule fitting the encoding rule used during the encoding.



(19) INDIA


(54) Title of the invention : IDENTIFICATION SYSTEM

(51) International classification :B60R 25/00 (31) Priority Document No :102005012215.9 (32) Priority Date :15/03/2005 (33) Name of priority country :Germany (86) International Application No Filing Date

:PCT/EP2006/050122 :10/01/2006


:NA :NA


:NA :NA


1)SIEMENS VDO AUTOMOTIVE AG Address of Applicant :SIEMENSSTRASSE 12, 93055 REGENSBURG Germany (72)Name of Inventor :

1)HEINZ-JOSEF HAUTVAST

(57) Abstract : The invention relates to an identification system for an object, particularly for an electrical or electronic device (1) that is provided with an item of identification information. The object contains an electronic memory inside of which the item of identification information is stored. This memory is connected to a display device via which the item of identification information can be displayed.



(19) INDIA


(54) Title of the invention : ETHANOL PRODUCTION FROM CITRUS PROCESSING WASTER

(51) International classification :C12P 7/08, C12M 1/00


:PCT/US2006/004199 :07/02/2006


:NA :NA


:NA :NA


1)THE UNITED STATES OF AMERICA, AS

REPRESENTED BY THE SECRETARY OF AGRICULTURE Address of Applicant :1400 INDEPENDENCE AVENUE SW, WASHINGTON DC 20250-0302, U.S.A. 2)RENEWABLE SPIRITS, LLC Address of Applicant : 7427 FLORANADA WAY, DELRAY BEACH, FL 33446, U.S.A. (72)Name of Inventor :

1)STEWART, DAVID A 2)WIDMER, WILBUR, W 3)GROHMANN, KAREL 4)WILKINS, MARK, R

(57) Abstract : Processes for producing ethanol from citrus waste by reducing the concentration of limonene in citrus waste to allow fermentation are disclosed. In one embodiment a slurry of ground citrus waste is partially hydrolyzed by heating using a jet cooker and then injected into a flash tank to remove limonene. The heated citrus waste is then cooled, hydrolyzed with enzymes and fermented to ethanol. An alternative method of limonene removal uses enzymatic hydrolysis followed by centrifugation to separate sugar-containing liquid from residual citrus waste solids containing limonene. Sugars are fermented and ethanol is distilled from the fermented mixture. The remaining solids and liquids may be processed further to yield other byproducts. More particularly, the solids may be dried and pressed for use in cattle feed and the liquids may be further fermented or processed to yield additional ethanol, acetate, galacturonic acid monomers and polymers, five carbon sugars and other products.


Publication Under Section 43(2) in Respect of the Grant

Following Patents have been granted and any “person interested” in opposing these patents under Section 25(2) may at any time

within one year from the date of this issue, give notice to the Controller of Patents at the appropriate office, on the prescribed

form-7 along with written statement and evidence, if any.

Serial Number

Patent Number

Application Number Date of Application

Date of Priority

Title of Invention Name of Patentee

Date of Publication of Abstract u/s 11(A)

Appropriate Office

1 199898 2540/DEL/1997 08/09/1997 15/10/1996 "MULTI STAGE HIGH EFFICIENCY LINEAR POWER AMPLIFIER".

MOTOROLA, INC., 11/03/2005 DELHI

2 210335 1178/DEL/2003 19/09/2003

"A PROCESS FOR MANUFACTURING OF CRANKSHAFT LIKE MACHINE PART THROUGH COSTING OF DECTIVE ISON"

COUNCIL OF

SCIENTIFIC AND

INDUSTRIAL

RESEARCH

27/05/2005 DELHI

3 211246 237/DEL/2002 15/03/2002 24/03/1997 "A THERAPEUTIC COMPOSITION"

IMMUNOMEDICS,

INC. 11/03/2005 DELHI

4 212997 255/DEL/2000 16/03/2000

A DEVICE USEFUL FOR IN SITU SEPARATION OF VOLATILE METAL HYDRIDE FROM LIQUID SAMPLE.

COUNCIL OF

SCIENTIFIC AND

INDUSTRIAL

RESEARCH

14/07/2006 DELHI

5 212998 2547/DEL/2005 20/09/2005

STILLING BASIN FOR CIRCULAR OUTLETS FOR DAM CONSTRUCTION

DR. ARUN

GOEL,DR. D.V.S.

VERMA 28/10/2005 DELHI

6 212999 1521/DEL/1999 06/12/1999 'PORTABLE COMPUTER PRINTER '

PROF. K.A.

PADMANABHAN

,RAJAT MOONA

,ROHIT

TOSHNIWAL,BIPUL

PARUA

14/04/2006 DELHI

7 213000 673/DEL/1996 27/03/1996 06/04/1995

"A SYSTEM FOR TIME ALIGNING A FRAME IN A SYNCHRONOUS COMMUNICATION NETWORK"

MOTOROLA, INC. 04/11/2005 DELHI

8 213001 622/DEL/1996 25/03/1996 30/03/1995 "A PACKAGING FILM WRAPPER"

VICTOR COMPANY

OF JAPAN, LTD. 04/11/2005 DELHI

9 213003 2663/DEL/1996 02/12/1996 01/12/1995

"THIAZOLYL OXADIAZINE COMPOUNDS OF FORMULA II"

SYNGENTA

PARTICIPATIONS

AG 11/03/2005 DELHI

10 213004 925/DEL/2004 24/05/2004 "A MULTIPURPOSE WATCH"

MOHAN LAL

AGARWAL 11/03/2005 DELHI

11 213005 18/DEL/2003 06/01/2003 "HERBAL SYEDA AAMENA 11/03/2005 DELHI


COMPOSITION FOR TREATING DISORDERS ASSOCIATED WITH MENOPAUSE"

NAAZ

12 213006 IN/PCT/2000/00445/DEL 28/06/1999 30/06/1998

"SPRAY-DRIED MICROPATICLES OF INSULIN AND PROCESS FOR PREPARATION THEREOF"

QUADRANT HEAL

THCARE (UK)

LIMITED 11/03/2005 DELHI

13 213008 3380/DEL/1997 24/11/1997 28/11/1996

"A METHOD FOR THE PRODUCTION OF SUBSTANTIALLY HOMOGENEOUS COMPRESSED GAS MIXTURS"

SOLVARY FLUOR

UND DERIVATE

GMBH 25/03/2005 DELHI

14 213010 1043/DEL/2002 07/12/1999 30/12/1998 "A METHOD FOR MANAGING DATA ON A DISC".

SAMSUNG

ELECTRONICS CO.,

LTD. 28/01/2005 DELHI

15 213012 3382/DEL/1997 24/11/1997

"COLD SHRINKABLE PROTECTION ELEMENT FOR CABLE JOINT"

NEXANS, 01/12/2006 DELHI

16 213013 1013/DEL/1998 21/04/1998

"METHOD OF DRIVING SURFACE DISCHARGE PLASMA DISPLAY PANEL"

SAMSUNG

DISPLAY DEVICES

COMPANY

LIMITED

01/12/2006 DELHI

17 213014 356/DEL/1997 13/02/1997 14/02/1996 "A TRANSACTION PROCESSING SYSTEM"

STERLING

COMMERCE, INC., 01/12/2006 DELHI

18 213018 2359/DEL/1997 20/08/1997 23/08/1996 "A METHOD OF PRINTING A POSTAGE INDICIUM"

PITNEY BOWES

INC., 01/12/2006 DELHI

19 213021 621/DEL/1997 12/03/1997

"A WATER BASED DEVICE TO SPREAD GELLING AGENT ON THE WATER SURFACE"

CHIEF

CONTROLLER,

RESEARCH AND

DEVELOPMENT

MINISTRY OF

DEFENCE,

GOVERNMENT OF

INDIA

22/12/2006 DELHI

20 213027 1619/DEL/1998 11/06/1998 11/06/1997

"A NOVEL ORAL DOSAGE FORM TO BE DELIVERED TO THE STOMACH"

THE PROCTER &

GAMBLE

COMPANY 01/12/2006 DELHI

21 213028 921/DEL/1997 09/04/1997

"METHOD AND APPARATUS FOR MANUFACTURING A SPRING UNIT"

SLUMBERLAND

PLC. 01/12/2006 DELHI

22 213029 2160/DEL/1996 01/10/1996 03/10/1995 "REAR PROJECTION VIDEO APPARATUS"

SONY

CORPORATION 01/12/2006 DELHI

23 213030 3727/DEL/1998 11/12/1998 06/07/1998 "A PROCESS FOR MANUFACTURING TOLUIDINE BLUE O"

ZILA

BIOTECHNOLOGY,

INC. 22/12/2006 DELHI


24 213031 0017/DEL/1998 05/01/1998 23/01/1997 "A HYDROSTATIC SEWER CLEANING MACHINE"

ELECTRIC EEL

MANUFACTURING

CO., INC. 01/12/2006 DELHI

25 213032 98/DEL/2000 03/02/2000 24/02/1999

"RECEIVE COIL AND MAGNETIC RESONANCE IMAGING METHOD AND APPARATUS"

GE YOKOGAWA

MEDICAL SYSTEM

LTD. 22/12/2006 DELHI

26 213033 536/DEL/1997 28/02/1997

A HOLOGRAPHIC INTERFEROMETRY RECORDING DEVICE FOR TESTING DISBONDING OF THE GAS TRUBINE COATINGS AND EXPLOSIVE CLADDED MATERIALS

BHARAT HEAVY

ELECTRICALS


27 213034 1083/DEL/1998 27/04/1998

"GAS INSULATED HYBRID TRANSMISSION LINE WITH AUXILIARY SHIELD"

BHARAT HEAVY

ELECTRICALS

LTD. 16/09/2005 DELHI

28 213035 2894/DEL/1997 09/10/1997

"SINGLE SHOT DISPOSABLE SYRINGE AND NEEDLE"

PRAVEEN SINGH 01/12/2006 DELHI

29 213036 2314/DEL/1997 18/08/1997 19/08/1996

''METHOD FOR ATTACHING A SET OF CHIP PARTS, LEAD PARTS AND SHIELD CASES FOR PREVENTING A HIGH FREQUENCY SIGNAL FROM BEING LAKED TO PRINTED CIRCUIT BOARD"

SONY


30 213037 IN/PCT/2001/00643/DEL 18/12/1998 28/12/1998

"APPARATUS AND METHOD FOR REPLACING BALLAST WATER IN A SHIP"

TEEKAY SHIPPING


31 213038 2537/DEL/1997 08/09/1997 " A WATER PURIFIER WITH COOLER "

SURESH NARAIN

MATHUR 01/12/2006 DELHI

32 213039 1487/DEL/1997 03/06/1997

"AN INTEGRATED CONTROL DEVICE OF ARTIFICIAL NEURAL NETWORK WITH AN ELECTROSTATIC PRECIPITATOR"

BHARAT HEAVY

ELECTRICALS

LTD. 23/12/2005 DELHI

33 213040 274/DEL/1997 31/01/1997 "MIXER TUBE FOR LOW VISCOSITY FLUIDS"

SULZER

CHEMTECH AG. 23/12/2005 DELHI

34 213041 0624/DEL/1998 11/03/1998 13/03/1997 "A DENSE FLUIDIZED BED

GEC ALSTHOM

STEIN INDUSTRIE 22/12/2006 DELHI


EXCHANGER".

35 213042 2191/DEL/1997 06/08/1997

A CONTINUOUS GAS FLUIDISED BED PROCESS FOR THE POLYMERISATION OF OLEFIN MONOMER

BP CHEMICALS


36 213043 463/DEL/2005 09/01/1997 08/11/1996

"A METHOD OF MAKING A THREE-DIMENSIONAL SHEET MATERIAL"

THE PROCTER &

GAMBLE


37 213047 2408/DEL/1996 01/11/1996

" A PROCESS FOR THE PREPARATION OF A NI-BASED SUPERALLOY "

CHIEF

CONTROLLER

RESEARCH AND

DEVELOPMENT

MINISTRY OF

DEFENCE,

GOVERNMENT OF

INDIA

01/12/2006 DELHI

38 213048 2923/DEL/1998 30/09/1998 02/10/1997 "AN APPARATUS FOR PRODUCING YARNS "

TORAY

ENGINEERING CO.

LTD. 01/12/2006 DELHI

39 213050 3486/DEL/1997 05/12/1997 A SECURITY DOCUMENT

ARJO WIGGINS

,N.V.BEKAERT S.A. 22/12/2006 DELHI

40 213052 3003/DEL/1997 20/10/1997

A METHOD FOR PREPARING AN ALPHA OR ALPHA-BETA TITANIUM ALLOY

GENERAL

ELECTRIC

COMPANY,,INSTIT

UTE OF METALS

SUPERPLASTICITY

PROBLEMS OF THE

RUSSIAN

ACADEMY OF

SICENCES

22/12/2006 DELHI

41 213053 2276/DEL/1996 22/10/1996 20/10/1995 "AN ADJUSTABLE COUPLER''

MAGNA FORCE

INCORPORATED 01/12/2006 DELHI

42 213055 521/DEL/2000 19/05/2000 28/01/2000 "VARIABLE LENGTH CODING METHOD AND APPARATUS"

SAMSUNG

ELECTRONICS CO.,

LTD 22/12/2006 DELHI

43 213057 552/DEL/1997 04/03/1997 SCREEN PRINTING MACHINE

DE LA RUE GIORI

S. A. 23/12/2005 DELHI

44 213058 2975/DEL/1996 27/12/1996 29/12/1995 "A TOOTHBRUSH " COLGATE

PALMOLIVE


45 213215 0561/DEL/1999 13/04/1999

HIGHLY EFFECTIVE HYPOGLYCAEMIC POLYPEPTIDE-K FROM A PLANT SOURCE

Dr. PUSHPA

KHANNA 06/04/2007 DELHI

46 213216 IN/PCT/2000/00130/DEL 29/01/1999 12/02/1998

"METHOD FOR THE AUTOMATED OPTIMAZATION OF AN INJECTION MOLDING MACHINE SET-UP PROCESS"

MOLDFLOW PTY.

LTD. 22/12/2006 DELHI

47 213217 1081/DEL/2000 29/11/2000 A MACHINE FOR THE MANUFACTURE

COUNCIL OF

SCIENTIFIC AND 22/12/2006 DELHI


OF GLOBOIDAL CAMS

INDUSTRIAL

RESEARCH

48 213218 2773/DEL/1996 11/12/1996 11/01/1996

DATA COMMUNICATION SYSTEM AND A DATA COMMUNICATION RECEIVERS

MOTOROLA INC. 01/12/2006 DELHI

49 213219 IN/PCT/2001/00497/DEL 13/12/1999 11/12/1998

"AN ISOCYANATE-BASED POLYMER FOAM AND PROCESS FOR PRODUCING THE SAME"

WOODBRIDGE

FOAM


50 213220 3821/DEL/1998 23/12/1998

"AN INTERNAL MIXER FOR MIXING PETROCHEMICAL MATERIALS AND OTHER INGREDIENTS".

THE GOODYEAR

TIRE & RUBBER


51 213221 160/DEL/2000 25/02/2000

"A PROCESS FOR THE FABRICATION OF IMPROVED METALLISED CERAMIC SUBSTRATE USEFUL FOR ASSEMBLY OF SEMICONDUCTOR DEVICES"

COUNCIL OF

SCIENTIFIC AND

INDUSTRIAL

RESEARCH

22/12/2006 DELHI

52 213222 127/DEL/2000 16/02/2000

"A PROCESS FOR THE SOLID STATE SYNTHESIS OF ENANTIOPURE β-AMINOALCOHOLS FROM RACEMIC EPOXIDES"

COUNCIL OF

SCIENTIFIC AND

INDUSTRIAL

RESEARCH

01/12/2006 DELHI

53 213223 1274/DEL/1999 22/09/1999 23/09/1998 "LAUNDRY DETERGENT BAR COMPOSITION".

THE PROCTER &

GAMBLE


54 213224 11/DEL/2000 07/01/2000

"AN IMPROVED HYDRO TURBINE POWER GENERATOR"

MAHESH PRASAD

GUPTA, 22/12/2006 DELHI

55 213225 260/DEL/2000 16/03/2000

A PROCESS OF MAKING VITREOUS COATING COMPOSITION SUITABLE FOR YELLOW VARIETY BRASS SUBSTRATE.

COUNCIL OF

SCIENTIFIC AND

INDUSTRIAL

RESEARCH

22/12/2006 DELHI

56 213226 1700/DELNP/2005 30/10/2003 01/11/2002 "A PROCESS FOR PREPARING 1,3-PROPANEDIOL"

SHELL

INTERNATIONALE

RESEARCH

MAATSCHAPPIJ

B.V.

05/01/2007 DELHI

57 213227 3440/DEL/1997 28/11/1997 06/12/1996 " A TYRE" COMPAGNIE

GENERALE DES

ETABLISSEMENTS

01/12/2006 DELHI


MICHELIN & CIE

58 213228 2513/DEL/1997 04/09/1997 05/09/1996

"A DIGITAL RECORDING APPARATUS PROVIDED WITH A DIGITAL INTERFACE"

SONY


59 213229 155/DEL/2000 25/02/2000 A PROCESS OF MAKING SIC-AIN SINTERED PRODUCT

COUNCIL OF

SCIENTIFIC AND

INDUSTRIAL

RESEARCH

22/12/2006 DELHI

60 213230 512/DEL/2000 15/05/2000

"A PROCESS FOR PREPARATION OF IRON BASE TITANIUM CARBIDE METAL-MATRIX COMPOSITES"

CHIEF

CONTROLLER

RESEARCH &

DEVELOPMENT

ORGANISATION

22/12/2006 DELHI

61 213231 223/DEL/2000 10/03/2000

'A PROCESS FOR THE PREPARATION OF AN IMPROVED POLYURETHANE BASED SEALANT'

CHIEF

CONTROLLER

RESEARCH &

DEVELOPMENT

ORGANISATION

22/12/2006 DELHI

62 213232 0383/DEL/1999 09/03/1999 10/03/1998 "RADIANT ENERGY COLLECTING APPARATUS"

ALLAN JAMES

YEOMANS 22/12/2006 DELHI

63 213233 36/DEL/2000 18/01/2000

AN IMPROVED PROCESS FOR SYNTHESIS OF TRANS -ALKENOIC ACIDS.

COUNCIL OF

SCIENTIFIC &

INDUSTRIAL

RESEARCH

22/12/2006 DELHI

64 213234 0660/DEL/1998 16/03/1998

AN INHALATION APPARATUS FOR DISPENSING A PRODUCT

BESPAK PLC. 01/12/2006 DELHI

65 213235 01216/DELNP/2004 08/11/2002 14/11/2001

"A CODE DIVISION MULTIPLE ACCESS MOBILE COMMUNICATIONS TERMINAL"

MOTOROLA, INC., 16/03/2007 DELHI

66 213236 2727/DEL/1996 09/12/1996 18/12/1995 "ATELEPHONE APPARATUS "

SONY


67 213237 3738/DEL/1997 22/12/1997 "A LIQUID CRYSTAL PROJECTOR"

SONY


68 213238 2407/DEL/1996 01/11/1996

"A PROCESS FOR THE PREPARATION OF A DECONTAMINATION"

THE CHIEF

CONTROLLER,

RESEARCH AND

DEVELOPMENT,

MINISTRY OF

DEFENCE,

GOVERNMINT OF

INDIA

22/12/2006 DELHI

69 213239 2012/DEL/1998 14/07/1998 15/07/1997

"AN ENERGY STORING MECHANISM FOR A SWITCHGEAR"

MITSUBISHI DENKI

KABUSHIKI

KAISHA 16/09/2005 DELHI

70 213240 0900/DEL/1998 07/04/1998 "A PORTABLE RICE DEPARMENT OF 01/12/2006 DELHI


HULLER" SCIENCE &

TECHNOLOGY

(DST),

71 213241 401/DEL/1997 20/02/1997

"AN IMPROVED PROCESS FOR THE PREPARATION OF COPPER AND BORON CONTAINING BAINITIC STEEL OR STEEL ALLOY "

THE CHIEF

CONTROLLER,

DEFENCE

RESEARCH &

DEVELOPMENT

ORGANISATION,

01/12/2006 DELHI

72 213242 1468/DEL/1998 29/05/1998 30/05/1997 "A FRICTION DISC FOR A FRICTION CLUTCH"

VALEO 22/12/2006 DELHI

73 213243 1193/DEL/2001 29/11/2001 19/12/2000 "A SERVOVALVE FOR REGULATING FUEL FLOW RATE"

SNECMA

MOTEURS 22/12/2006 DELHI

74 213244 2952/DEL/1998 06/10/1998 06/10/1997

WINDER FOR WINDING SYNTHETIC CONTINUOUS ELASTOMERIC AND METHOD THEREOF

TORAY

ENGINEERING

COMPANY LTD 22/12/2006 DELHI

75 213245 IN/PCT/2000/00256/DEL 12/04/1999 14/04/1998

"A PROCESS FOR ISOMERIZING A FEED WHICH CONTAINS ETHYLBENZENE AND XYLENE"

MOBLE OIL


76 213246 0456/DEL/1999 22/03/1999 "ENGINE OPERATED WORKING MACHINE"

HONDA GIKEN

KOGYO

KABUSHIKI

KAISHA

01/12/2006 DELHI





Serial Number

Patent Number


Date of Priority



Appropriate Office

1 211318 1011/MUMNP/2005 20/01/2005 20/01/2004

METHOD AND APPARATUS FOR 3-DIMENSIONAL ENCODING AND/OR DECODING OF VIDEO

1) SEJONG

INDUSTRY

ACADEMY

COOPERATION

FOUNDATION 2)

SAMSUNG

ELECTRONICS CO

LTD,SUMSUNG

ELECTRONICS

CO., LTD.

12/05/2006 MUMBAI






Serial Number

Patent Number


Date of Priority



Appropriate Office

1 213406 00059/KOLNP/2005 05/06/2003 19/07/2002

METHOD FOR THE PRODUCTION OF PROPYLENE FROM A CHARGE STREAM CONTAINING C4 TO C8 OLEFINS

LURGI AG 24/02/2006 KOLKATA

2 213407 00357/KOLNP/2004 16/08/2001 16/08/2001 AN INJECTION DEVICE. MILESTONE SCIENTIFIC, INC.

07/04/2006 KOLKATA

3 213408 00656/KOLNP/2004 25/10/2002 26/10/2001 AN IMPRO0VED LAMELLAR CLARIFIER.

INNOVA ENVIRONNEMENT

27/01/2006 KOLKATA

4 213409 00666/KOLNP/2004 25/11/2002 26/11/2001

A COMPOSITION USEFUL FOR REMOVAL OF FIBRIN-BOUND BLOOD CLOTS FROM A CATHETER

GENENTCH INC. 07/04/2006 KOLKATA

5 213410 00997/KOLNP/2003 13/02/2002 23/02/2001

DEVICE FOR BLOWING A FLUID ONTO AT LEAST ONE FACE OF A THIN ELEMENT AND ASSOCIATED BLOWING UNIT.

SAINT-GOBAIN SEVA. 08/07/2005 KOLKATA

6 213411 01106/KOLNP/2005 03/12/2003 03/12/2002 A PRION BINDING LIGAND

PATHOGEN REMOVAL AND DIAGNOSTIC TECHNOLOGIES INC.,NORTH CAROLINA STATE UNIVERSITY

09/06/2006 KOLKATA

7 213412 01161/KOLNP/2003 03/04/2002 03/04/2001

A METHOD OF SYNCHRONIZATION OF A POWERLINE MODEM NETWORK FOR A PLURALITY OF DEVICES AND A POWERLINE NETWORK.

THOMSON LICENSING SA. 14/10/2005 KOLKATA

8 213413 01535/KOLNP/2005 10/10/2003 14/02/2003 A METHOD OF TREATING A CRYOGENIC METAL TANK.

SAIPEM S.A. 12/05/2006 KOLKATA

9 213414 01721/KOLNP/2005 05/02/2004 31/03/2003

MICRODEVICE ASSEMBLY HAVING A FINE GRAIN GETTER LAYER FOR MAINTAINING VACUUM

MOTOROLA INC. 14/07/2006 KOLKATA

10 213415 01896/KOLNP/2005 12/03/2004 01/04/2003 FLEXIBLE CONTAINER FOR HOLDING A LIQUID

PAKERMAN S.A. 18/08/2006 KOLKATA

11 213416 01922/KOLNP/2005 01/04/2004 30/04/2003 A DEVICE FOR THE AIR TREATMENT OF YARN IN A YARN CHANNEL.

HEBERLEIN FIBERTECHNOLOGY, INC.,

22/09/2006 KOLKATA

12 213417 02502/KOLNP/2005 02/07/2004 08/07/2003 EXHAUST STEAM LINE FOR STEAM PLANTS

GEA ENERGIETECHNIK GMBH

17/11/2006 KOLKATA

13 213418 113/KOLNP/2005 22/08/2003 22/08/2002

TRANSMISSION BELT AND INDICATION APPARATUS FOR INDICATING THE END OF LIFE OF TRANSMISSION BELT.

GATES UNITTA ASIA CO. 26/05/2006 KOLKATA

14 213419 119/KOLNP/2005 16/07/2003 02/08/2002 EXHAUST GAS FILTER AND METHOD FOR CLEANING AN EXHAUST GAS.

EMITEC GESELLSCHAFT FUR EMISSIONSTECH NOLOGIE MBH

24/02/2006 KOLKATA

15 213420 171/KOLNP/2003 14/09/2001 22/09/2000

A DEVICE AND METHOD FOR RETAINING A WORK PIECE IN A SWAGE MACHINE AND SWAGING THE WORK PIECE.

GENERAL ELECTRIC CO. 11/03/2005 KOLKATA


16 213421 185/KOLNP/2005 02/07/2003 02/07/2003

PROCESS FOR PREPARING 17 B- SUBSTITUTED 4-AZA-ANDROST -1-EN-3 ONE COMPOUNDS.

SIEGFRIED GENERICS INTERNATIONAL AG.

04/11/2005 KOLKATA

17 213422 186/KOLNP/2005 15/07/2003 15/07/2002 METHOD FOR PRODUCING 2-DEOXY-L-RIBOSE

SAMCHULLY PHARM CO. LTD

04/11/2005 KOLKATA

18 213423 191/KOLNP/2005 07/07/2003 29/07/2002

A METHOD OF MAKING A COMPOSITE CUTTING TOOL AND A COMPOSITE CUTTING TOOL

WILLIAM ENGINEERING, LLC.

06/01/2006 KOLKATA

19 213424 288/KOLNP/2005 28/07/2003 31/07/2002 AN INJECTABLE DEPOT COMPOSITION AND A KIT THEREOF.

ALZA CORPORATION 06/01/2006 KOLKATA

20 213425 387/KOLNP/2005 30/09/2003 30/09/2002 NUCLEOSIDE DERIVATIVES FOR TREATING HEPATITIS C VIRUS INFECTION .

GENELABS TECHNOLOGIES INC.

24/03/2006 KOLKATA

21 213426 390/KOLNP/2005 05/09/2003 13/09/2002

A METHOD OF MAKING MODIFIED SILICA FILLERS AND A COMPOSITION CONTAINING ORGANOSILICON COMPOUNDS.

DOW CORNING CORPORATION

24/02/2006 KOLKATA

22 213427 398/KOLNP/2003 09/10/2001 19/10/2000 MICROELECTRONIC SUBSTRATE AND METHODS OF FABRICATING THE SAME .

INTEL CORPORATION. 02/12/2005 KOLKATA

23 213428 476/KOLNP/2005 09/10/2003 10/10/2002 A PYRAZOLE CARBOXYLIC ACID CIMPOUND.

ARENA PHARMACEUTICALS INC.

24/02/2006 KOLKATA

24 213429 545/KOLNP/2003 19/11/2001 27/11/2000

DATA TRANSFER SYSTEM FOR INTERCOMMUNICATING APPARATUSES HAVING A DATA BUS.

THOMSON LICENSING SA. 11/03/2005 KOLKATA

25 213430 620/KOLNP/2005 17/10/2003 12/11/2002 METHOD OF MAKING SULFUR CONTAINING ORGANOSILICON COMPOUNDS .

DOW CORNING CORPORATION

03/03/2006 KOLKATA

26 213431 708/KOLNP/2005 24/09/2003 24/09/2002

METHOD AND APPARATUS FOR COMPOSTING WASTE WITH RECIRCULATION OF AIR AND GASEOUS MATERIALS AND COLLECTION OF LIQUID.

CS ASSOCIATED PTY LTD. 16/06/2006 KOLKATA

27 213432 700/KOLNP/2005 17/10/2003 22/10/2002 METHOD OF ASSEMBLING MOTOR VEHICLE BODY.

DAIHATSU MOTOR CO., LTD.

21/04/2006 KOLKATA

28 213433 927/CAL/1998 22/05/1998 23/09/1997 ELECTROPHOTOGRAPHIC COMPONENT CLEANING APPARATUS

HEWLETT-PACKARD COMPANY

13/01/2006 KOLKATA

29 213434 95/KOLNP/2003 29/08/2001 05/09/2000 APPARATUS AND METHOD FOR IDENTIFYING AND SCALING IMAGES.

INTEL CORPORATION 04/11/2005 KOLKATA

30 213435 IN/PCT/1999/30/KOL 25/01/1999 23/01/1998

IMAGE TRANSMISSION METHOD, IMAGE PROCESSING METHOD, IMAGE PROCESSING APPARATUS, AND DATA STORAGE MEDIUM.

MATSUSHITA ELECTRIC INDUSTRIAL CO. LTD.,

02/02/2007 KOLKATA

31 213436 IN/PCT/2000/162/KOL 19/01/1999 26/01/1998 ALPHA-KETOAMIDE INHIBITORS OF 20S PROTEASOME.

CV THERAPEUTICS, INC. 11/03/2005 KOLKATA

32 213437 IN/PCT/2000/430/KOL 21/04/1999 21/04/1998 A BARRIER-FORMING COMPOSITION.

INFECTIO RECHERCHE INC.

16/09/2005 KOLKATA

33 213438 IN/PCT/2000/50/KOL 06/10/1999 13/10/1998

A METHOD AND A PROTECTING SYSTEM FOR DETECTING A POTENTIALLY DESTRUCTIVE STATE OF AN ARRANGEMENT CONTAINING ELECTRONIC AND FOR TERMINATING THE DESTRUCTIVE STATE

THALES NEDERLAND B.V. 16/06/2006 KOLKATA

34 213439 IN/PCT/2000/585/KOL 08/06/1999 10/06/1998 4-SUBSTITUTED-2-CARBOXY TETRAHYDROQUINOLINE COMPOUNDS

GLAXO WELLCOME SPA. 11/03/2005 KOLKATA


35 213440 IN/PCT/2001/1107/KOL 25/05/2000 15/06/1999

A DEVICE ABSORBING THE AXIAL THURST OF A MULTISTAGE CENTRIFUNGAL PUMP.

KSB AKTIENGESELLSCHAFT.

16/06/2006 KOLKATA

36 213441 IN/PCT/2001/45/KOL 22/07/1999 24/07/1998 MEDICINAL AEROSOL FORMULATIONS

JAGO RESEARCH AG 01/07/2005 KOLKATA

37 213442 IN/PCT/2001/636/KOL 17/12/1999 18/12/1998

PHARMACEUTICAL FORMULATIONS CONTAINING FLOUROALKANES AND BUDESONIDE.

IVAX RESEARCH, INC. 11/03/2005 KOLKATA

38 213443 IN/PCT/2001/748/KOL 18/01/2000 22/01/1999 SYNTHETIC FIBER AND THE PRODUCTION PROCESS THEREOF

SICHUAN FOREIGN ECONOMIC RELATIONS & TRADE CORPORATION

22/09/2006 KOLKATA

39 213444 IN/PCT/2001/75/KOL 22/03/2000 17/05/1999 AN OPTICAL CDMA SYSTEM CODESTREAM TECHNOLOGIES CORPORATION

10/02/2006 KOLKATA

40 213445 IN/PCT/2002/01539/KOL 26/01/2001 24/07/2000 AN INKJET PRINTHEAD HEWLETT PACKARD COMPANY

11/03/2005 KOLKATA

41 213446 IN/PCT/2002/1019/KOL 06/03/2001 06/03/2000 AZACYCLIC COMPOUNDS. ACADIA PHARMACEUTICALS, INC.,

26/08/2005 KOLKATA

42 213447 IN/PCT/2002/1342/KOL 27/04/2001 28/04/2000 2-ACYL INDOLE DERIVATIVES AND THEIR USE AS ANTITUM OR AGENTS.

BAXTER HEALTHCARE SA.

02/09/2005 KOLKATA

43 213448 IN/PCT/2002/1354/KOL 23/04/2001 28/04/2000

A REAL-TIME TRANSACTION ORDER MANAGEMENT SYSTEM AND A METHOD OF MANAGING TRANSACTION ORDERS IN REAL-TIME.

YANTRA CORPORATION 26/08/2005 KOLKATA

44 213450 IN/PCT/2002/1415/KOL 03/05/2001 17/05/2000 B-CARBOLINE COMPOUNDS. ORTHO-MCNEIL PHARMACEUTICAL, INC.

11/03/2005 KOLKATA

45 213451 IN/PCT/2002/304/KOL 05/07/2001 07/07/2000 AN IMPROVED ROTARY CUTTING END MILL TOOL.

BERKSHIRE PRECISION TOOL, LLC.

02/12/2005 KOLKATA

46 213452 IN/PCT/2002/390/KOL 26/09/2000 27/09/1999

A METHOD OF DISPLAYING A WINDOW ON A SCREEN AND A RECEIVER/DECODER THEREFOR.

CANAL+SOCIETY ANONYME

13/01/2006 KOLKATA

47 213453 IN/PCT/2002/425/KOL 05/10/1999 28/03/1997 BATCH SLUDGE DEHYDRATOR FENTON ENVIRONMENTAL TECHNOLOGIES, INC.

25/05/2007 KOLKATA

48 213454 IN/PCT/2002/465/KOL 28/09/2000 15/10/1999 A MACHINE FOR COATING GRANULAR ARTICLES

G.S.S.R.L COATING SYSTEM

02/12/2005 KOLKATA

49 213455 IN/PCT/2002/59/KOL 23/06/2000 15/07/1999

A METHOD AND APPARATUS FOR SECURING INFORMATION BEING TRANSFERRED FROM AN INFORMATION STORAGE DEVICE INTERACTING WITH A HOST DEVICE.

THOMSON LICENSING S.A. 08/12/2006 KOLKATA

50 213456 IN/PCT/2002/763/KOL 15/11/2000 21/12/1999 COVER FOR COMPACT DISCS COVER A/S 17/02/2006 KOLKATA

the patent office

Documents