the next-generation australian geodetic datum benefits and challenges richard stanaway quickclose...
TRANSCRIPT
The Next-Generation Australian Geodetic Datum
Benefits and Challenges
Richard StanawayQUICKCLOSE Pty Ltd & UNSW
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Geoscience Australia – Geodesy and Seismic Monitoring Group(Gary Johnston, John Dawson, Guorong Hu, Minghai Jia, Anna Riddell,
Craig Harrison, Ryan Ruddick, Bob Twilley)
Geodetic Survey – Office of the Surveyor-General Victoria (OSGV) - DTPLI(Roger Fraser, Alex Woods)
GPSnet VICMAP Position – DEPI(Hayden Asmussen, Peter Oates)
CRC SI Positioning Program - Next Generation Datum 1.02(Chris Rizos, Craig Harrison, Joel Haasdyk, Nic Donnelly, Richard Stanaway)
UNSW - Craig Roberts LINZ – Chris Crook
Acknowledgments
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
The motivation for datum modernisation – Drivers for change and benefits
Maintaining alignment of Australia’s geodetic datum with International Reference Frames (e.g. ITRF and WGS84) – intrinsically used by GNSS
Improved precision for a wider spectrum of users who will use GNSS precise positioning and SBAS
Mitigating unmodelled errors arising from deformation events (e.g. earthquakes, subsidence)and plate rotation effects
Meckering, WA1968
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
The future of positioningcirca 2030
4D GIS in the cloudreal-time positions
centralised data + clone
mm accurate
authoritative
ubiquitous
real-time information currency
mm/cm accurate real-time personal positioning and navigation – everywhere - No need for explicit use of “coordinates”!
multi-GNSS + augmentation (e.g. SBAS)+ indoor positioning (e.g. Locata)+ miniature inertial sensors
real-timeprecise broadcast orbits
5G/6G wirelessand satellite comms.(e.g. Beidou, Galileo)
active transformation model
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Spatial Data and Positioning in the future
ESRI
KinematicSpatial Data
GNSS Positioningwithin ITRF / GGRF
Complex time dependent
deformation modelling
Software matches epoch of positioning with epoch of data
in order to maintain context
Data “tagged” with datum and epoch metadata
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Rotation of Victorian network – Australian Plate rotation
0.0012” per year= 0.031” 1994-2020
or8 mm rotation of
a 50 km GNSS baselinein Victoria
at epoch 2020
GNSS baseline vector computation is in ITRF at epoch of measurement NOT GDA94!
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Station velocities (ITRF) – Victorian AuScope – mm/yr
Computed from GA APREF 2014.0 solution (John Dawson and Guorong Hu)2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Positioning precision and plate tectonics
Static Geodetic Datum(e.g. GDA94 or GDA2020)
GNSS Reference Frames(e.g. ITRF2008 and WGS84)
Coordinates of ground features move due to rotation of tectonic plate(approx. 60 mm/yr in Victoria)
14 parametertransformation
and / ordeformation
model
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
How do we position ourselves now?Real-timeSingle Point-positioning(SPP)accuracy 2-10 metres
DGNSS and Wide-area RTK(e.g. OmniSTAR and StarFire)10 cm – 1 m dependingon level of service
Precise Point-positioning(PPP)accuracy cm-dm(using IGS or Commercial Orbits )
NRTK or RTK Auspos (using CORS)accuracy 5-20 mm CORS at
Bald Rock AuScope
GNSS reference frame intrinsically ITRFand transformed to a static frame using 14 parameter modelor Euler PoleITRF
ITRF
ITRF
GDA94
GDA94
Passive geodetic control(e.g. PMs, PSMs)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Current compatibility between GNSS usage and GDA94
data processed in ITRF and transformed to GDA94 using 14 parameter model – recommended approach
Excellent
Partial Compatibility(ITRF only)
ITRF2008 – requires 14 parameter transformationotherwise ~ 1.2 m difference
Single Point-positioning – WGS 84(mass market and handheld)2-10 m precision, so difference marginally noticeable at present
GPSnet
Very good
NRTK and RTK data processed in GDA94Long baselineplate rotation effect1 mm per 10 km baseline length
SMES
Good
If used as GNSS reference stn.Most passive control has PU better than 50 mm, but can be more than 1 m (mostly ROs)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Hierarchy of Reference Frames
in VictoriaAsia-Pacific Reference Frame (APREF)
InternationalTerrestrialReference Frame(ITRF)
Australian Regional GNSS Network (ARGN)
& AuScope
VICMAP Position - GPSnet
Passive geodetic marks – accessed by SMES
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Current accuracy of GDA94 in Victoria
Roger Fraser, Manager Geodetic Survey, OSGV - DTPLI
e.g. radio masts, towers etc.
20-50 mmmost PMs
PSMs
6 mmAuScopeGPSnetGeodetic BMsHSMsVICSZ stations
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Stability of Victorian AuScope network mm/yr
Computed from GA APREF 2014.0 solution (John Dawson and Guorong Hu) and ITRF2008 Plate Model (Altamimi et al.)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Localised instability (mining subsidence, clay soil etc.)
From DEPI report -Trial of satellite radar interferometry (InSAR) to monitor subsidence along the Gippsland Coast– prepared by Linlin Ge and Xiaojing Li, University of New South Wales
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Current roadmap for datum modernisation(ICSM PCG)
1st January 2017Launch of GDA2020 which is currently proposed to be realised as ITRF2014 propagated to epoch 2020 (1st January 2020). GDA2020 will supersede GDA94 – 1.5 to 1.6 m difference in coordinates in Victoria
1st January 2020Launch of kinematic Australian Terrestrial Reference Frame (ATRF) (proposed name). Fully kinematic and continuously aligned with ITRF
Ellipsoid Height changes of ~ 80 mm in Victoria(will require new Ausgeoid2020 geoid model)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Modernisation of GDA94 not supported by PCG
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
(from Haasdyk
et al. 2014)
PCG Option
Practical steps to GDA2020 – Surveyors
Managing GPSnet, AllDayRTK, SmartNET, Trimble VRS Now, transition from GDA94 to GDA2020 coordinate delivery – date of changeover – Delivery of coordinates – Use of Ausgeoid2020 (Cannot use Ausgeoid09 with GDA2020).
Implications for ~1.6 m coordinate change for existing users (e.g. Precision Ag.) on projects – require change of project datum and model if currently GDA94? Re-calibrate site calibrations/transformations if currently defined in GDA94.
AusPOS will provide ITRF2014, GDA2020. GDA94 - maybe??
SMES – GDA2020 coordinates and GDA94 - maybe??
GDA2020 Grid Coordinates will be MGA2020
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Practical steps to GDA2020 – GIS Users
Requires direct implementation of direct GDA94 to GDA2020 transformation parameters and distortion grid (not such a problem in Victoria – as GDA94 distortions mostly removed in current state adjustment)
Caution with using WGS84 has hub frame for datum transformations. Caution regarding rotation convention(e.g. Position Vector (PV) and Coordinate Frame(CF) have opposite signs)
Migration of Vicmap data from GDA94 to GDA2020Migration of other important GIS datasets (e.g. G-Naf, Vicmap, DCDB, Local Authority, Water, NBN, Electricity, Gas, Roads) to GDA2020. Validation of transformation.
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
GIS Pitfalls – null transformations between GDA94, GDA2020 and WGS84 using 7 parameter model
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
New datum pitfalls for surveyors watch out for
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Pitfalls continued ....
GDA2020 data CANNOT be overlain on GDA94 data at survey accuracy without using the correct transformation – 1.6 metre misalignment.
Always use full geodetic datum and map grid suffixese.g. GDA2020 and MGA2020 – not GDA and MGA- on all coordinate data and plans.
Use the right transformation parameters and tools
Double-check transformations using known test data.
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
GDA94 to GDA2020 – coordinate change (m)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Transformation options from GDA94 to GDA2020
7-parameter transformationEuler pole transformation (3 parameter)Absolute deformation model (coordinate shift e.g. NTv2)7-parameter + residual deformation model (NTv2)Euler pole + residual deformation model (NTv2)
Transformation options from GDA94 to kinematic ATRF
14-parameter transformation (7 parameters + rates + epoch)Euler pole transformation (3 parameter + epoch)Absolute deformation model (coord. shift + rate + epoch)14-parameter + residual deformation model + epochEuler pole + residual deformation model + epoch
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Geodetic Control layer (Datum e.g. GDA94)
Cadastral Layer (GDA94)
Imagery Layer (GDA94?)
Elevation Layer GDA94 (e.g. LiDar)
Utilities Layers (GDA94) (e.g. Water, Electricity, Optical Fibre)
GIS requirement - Alignment of Data in a 2D/3D GIS
Different layers in GIS have to be aligned at a common epochfor meaningful analysis and data context (relative precision of layers wrt. each other and datum)
Existing GDA94 GIS data can be transformed to 2020 or vv.using a 7 parameter transformation (not computed yet)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Geodetic Control layer (Kinematic Datum) e.g. epoch 2026.45
Cadastral Layer (e.g. epoch 1994.0)
Imagery Layer (e.g. epoch 2010.095)(Raster layer adopted as common epoch for computational efficiency)
Elevation Layer (e.g. LiDar) (e.g. 2014.98)
Water utility Layer (e.g. 2014.0)
Future challenges –Alignment of Data with arbitrary epochs in a 4D GIS
Different layers in GIS still have to be aligned at a common epochfor meaningful analysis and context. Potential for metre + errors if epoch metadata is ignored
Requires universal acceptance and consistent application of kinematic transformation models in all GIS – requires GIS user skill and care!
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Geodetic Control layer (Datum) – e.g. 2026.45 transformed to 2010.095
Cadastral Layer (e.g. 1994.0 transformed to 2010.095)
Imagery Layer (e.g. 2010.095)(epoch 2010.095 used as common epoch)
Elevation Layer (e.g. LiDar) (e.g. 2014.98 transformed to 2010.095)
Water utility Layer (e.g. 2014.0 transformed to 2010.095)
Alignment of Data in a 4D GIS
14-parameter transformation or deformation model used to align different epoch layers and data at a common epoch
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
A 1.6 m “mistake” is
small for many users
but can be significant for others!
Terrestrial surveys (e.g. total station, TLS) data epoch is dependent upon epoch of passive control coordinates (are they updated monthly or not?)
Will surveying and CAD software (e.g. Liscad, 12DModel, Terramodel) be able to manage survey data within a kinematic datum?
Challenges – User perspectives and software
Strewth!I hope our surveyorhas got good PI insurance!!!
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Geodetic Control layer (Kinematic) – e.g. epoch 2026.45
Cadastral Layer (epoch 2020)
Imagery Layer (epoch 2020)
Elevation Layer (e.g. LiDar) (2020)
Water utility Layer (epoch 2020)
Other options for datum modernisation– (e.g. dual-frame)
Positioning in ITRF but consistently transforming positions to an Australian plate fixed frame so that data can maintain local context(approach adopted in Europe (EUREF), North and South America)
Requires consistent application of 14-parameter and deformation models in positioning equipment – and surveyor skill!
14 parameter or Euler pole transformation
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Option for a Reference Frame fixed to the Australian Plate (a GDA94 like reference frame)
Defined by Euler pole of the Australian Plate(Frame moves with stable portion of the Australian Plate)
Station velocities minimised (typically less than 0.2 mm/yr)
Reference epoch has minimal impact on coordinate changes
Distortion free
Linkable directly to ITRF by 3 parameter transformation(without loss of precision)
Localised deformation can be better visualised and analysed
Supports stability of GIS data management until 4D GIS is fully developed, tested and implemented
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
Correction to GDA94 in Victoria if epoch 1994 is maintained (ITRF2014 @ 1994.0) (mm)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
This option (modernised GDA94) is not supported by PCG for final
ICSM approval
Datum Modernisation & epoch change - Conclusions
Benefits of GDA2020 and ATRFMaintains alignment with ITRFSupports native GNSS precise positioningMitigates effects of deformation and plate rotation
Challenges~1.6 metre change in fundamental coordinate systemRequires robust GIS transformation strategy and metadataRisks if epoch or datum metadata are not managed or communicated in a robust manner
Two-frame option (ITRF and Australian plate fixed frame)To maximise benefits of both ITRF and modernised GDA94(until 4D GIS and transformation tools are developed)
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015
This is an opportunity for surveyors to reclaim the technological high ground with datums,
projections and spatial data
Surveyors are the only “experts” in the application and use of geodetic datums in the real world (applied geodesy).
Surveyors are expected to fully understand differences between datums and explain these to clients and other non-expert users.
Surveyors can show leadership by providing advice and support to GIS professionals, managers of spatial data, engineers and project managers.
2015 Institution of Surveyors Victoria – Regional Conference – Wangaratta – 18th April 2015