the mini pamper vehicle - seatec · 2020. 7. 28. · mini pamper brushes (350mm diameter) whatever...

AB www.seatec-services.com UK [email protected] +44 (0) 23 8026 9866 Europe [email protected] +31 (0) 10 438 6644 South East Asia [email protected] +65 6351 8720 (Singapore) +603 2181 6330 (Malaysia) Chennai (Global Operations) [email protected] +91 44 4647 9922 Performance assured THE MINI PAMPER VEHICLE Innovative design The diagram below shows how the Mini-Pamper hull-cleaning machine is fitted with two counter-rotating brushes that create a suction force of several hundred kilograms on to the hull. If these brushes were allowed to operate without control they would abrade and damage the underlying surface. The onboard control mechanism incorporated into the brush mountings of Mini-Pamper counters this suction force and transfers the load on to the chassis. There is ample force to create a stable platform that can be driven and steered over the hull whilst the brushes glide over the surface without damage to the coating. Plough If a hull has not been regularly cleaned, a build-up of crustaceans can occur. The brushes are designed to remove crustaceans but when this build-up is excessive, as is often found on ships coming out of lay up, then the plough attachment is used to slice through and remove the bulk so that the brushes can then complete the hull clean in a single pass. Specifications Above: Optional plough for the removal of excessive crustacean build up (top first). WD80 Power Pack required for optimal operation of the Mini-Pamper (second). HULL CHASSIS 400kg RESTRAINING FORCE 200kg SUCTION 200kg SUCTION 200kg WHEEL CONTACT FORCE 200kg WHEEL CONTACT FORCE Weight of vehicle in air 130kgs Weight in water Slight positive buoyancy Length overall 1500mm Width overall 760mm Cleaning width 650mm Suction force approx. 400kgs Max speed 0.7 m/sec Max theoretical cleaning rate 1755m 2 per hr Practical achievable cleaning rate 1100m 2 per hr NB: Specification may change due to constant development of the vehicle.

Upload: others

Post on 23-Jan-2021

3 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: THE MINI PAMPER VEHICLE - SeaTec · 2020. 7. 28. · MINI PAMPER BRUSHES (350mm diameter) Whatever coating is applied to your vessel – conventional antifouling, low surface energy

ABwww.seatec-services.com

[email protected]+44 (0) 23 8026 9866

[email protected]+31 (0) 10 438 6644

South East [email protected]+65 6351 8720 (Singapore)+603 2181 6330 (Malaysia)

Chennai (Global Operations)[email protected]+91 44 4647 9922

Performance assured

THE MINI PAMPER VEHICLE

Innovative designThe diagram below shows how the Mini-Pamper hull-cleaning machine is fitted with two counter-rotating brushes that create a suction force of several hundred kilograms on to the hull.If these brushes were allowed to operate without control they would abrade and damage the underlying surface. The onboard control mechanism incorporated into the brush mountings of Mini-Pamper counters this suction force and transfers the load on to the chassis.There is ample force to create a stable platform that can be driven and steered over the hull whilst the brushes glide over the surface without damage to the coating.

PloughIf a hull has not been regularly cleaned, a build-up of crustaceans can occur. The brushes are designed to remove crustaceans but when this build-up is excessive, as is often found on ships coming out of lay up, then the plough attachment is used to slice through and remove the bulk so that the brushes can then complete the hull clean in a single pass.

SpecificationsAbove: Optional plough for the removal of excessive crustacean build up (top first). WD80 Power Pack required for optimal operation of the Mini-Pamper (second).

HULL

CHASSIS

400kg RESTRAINING FORCE

200kg SUCTION 200kg SUCTION

200kg WHEELCONTACT FORCE

Weight of vehicle in air 130kgs

Weight in water Slight positive buoyancy

Length overall 1500mm

Width overall 760mm

Cleaning width 650mm

Suction force approx. 400kgs

Max speed 0.7 m/sec

Max theoretical cleaning rate 1755m2 per hr

Practical achievable cleaning rate 1100m2 per hr

NB: Specification may change due to constant development of the vehicle.

Page 2: THE MINI PAMPER VEHICLE - SeaTec · 2020. 7. 28. · MINI PAMPER BRUSHES (350mm diameter) Whatever coating is applied to your vessel – conventional antifouling, low surface energy

ABwww.seatec-services.com

[email protected]+44 (0) 23 8026 9866

[email protected]+31 (0) 10 438 6644

South East [email protected]+65 6351 8720 (Singapore)+603 2181 6330 (Malaysia)

Chennai (Global Operations)[email protected]+91 44 4647 9922

Performance assured

MINI PAMPER BRUSHES(350mm diameter)

Whatever coating is applied to your vessel – conventional antifouling, low surface energy silicon coatings or no antifouling at all – the MINI-PAMPER hull cleaning vehicle will remove marine growth without damaging the substrate, subject to correct usage and brush selection.

4 rows of soft plastic bristles, for removing light to medium slime and weed.

SeaTec ordering number 01225

POLYESTER BRISTLE BRUSH (LIGHT DUTY)

4 rows of hard plastic bristles, for removing heavy slime and weed.

SeaTec ordering number 01231

POLYESTER BRISTLE BRUSH (HEAVY DUTY)

This brush has been developed to remove marine fouling from low surface energy coatings, without causing coating damage.

SeaTec ordering number 01228 (RH), 01229 (LH)

NEW SILICON COATING CLEANING BRUSH

2 rows of coach bolts for removing very heavy shell growth.

SeaTec ordering number 01146

COACH BOLT BRUSH