the liebherr working tools · liebherr working tools for excavators were designed as ... ing teeth...
TRANSCRIPT
2
Tool-System for a variety of jobsLiebherr working tools for excavators were designed as problem solvers for the most varied applications. The carefully balanced program ranges from standard buckets for digging and loading of loosened material to buckets for heavy-duty jobs in the mining industry with extreme break-out forces and high wear and tear. Equipped with effective, to the relating ground match-ing teeth the Liebherr digging tools provide a maximum productivity and longevity.
PerformanceLiebherr digging tools are particularly productive excavator components at the very latest technological level. Special bucket shapes, permit maximum transmission of power, provide the best penetration- and outstanding dig-ging characteristics. Optimized bucket capacities and improved heap-cones provide the best turn-over performance.
ReliabilityLiebherr digging tools are in-house designed and manufactured. Specific material selection, specialized heat treatment and lowest machining toler-ances are utilized in order to achieve the especially toughness and the high longevity. The convincing result: outstanding dependability under the most severe job conditions.
ComfortThe careful and precise calibration of bucket shape and tooth selection provides the ideal digging tool for each job. The proven and reliable quick-change system LIKUFIX permits the split-second, safe exchange of me-chanical and hydraulic attaching tools by the press of a button from the cab. LIKUFIX attaching tools also work on hydraulic excavators with Liebherr quick change adapters without LIKUFIX - that means full flexibility and high comfort in every situation.
EfficiencyLiebherr digging tools provide a maximum of profitability. The Liebherr quick change systems increase productivity especially in applications with varying attaching tools. The 24/7 availability of wear parts and the easy exchange procedure safe time and money as well. Because of the modular design, the change systems and tools are very suitable for future tasks.
4
Bucket optionsWhether loose dirt, abrasive material or hard rock – quality and effectiveness of every excavator job are affected by the targeted selection of the suitable bucket. Therefore, Liebherr has designed a wide range of bucket options, which are especially suitable for an applicable job due to the shape, material selection and technical fittings. Practical experi-ence and continued attention to product development assure that Liebherr buckets are always state-of-the-art technology.
Backhoe bucket with teeth
Backhoe bucket with cutting edge
HD-backhoe bucket
Backhoe bucket with limited digging depth
Backhoe bucket with clip-on cutting edge
Backhoe bucket with univer-sal mounting bracket
Suitable for very abrasive materials due to wear protection and side reinforcement
Suitable for digging up hard ground
A backhoe bucket with teeth that can be equipped with a cutter if required
Suitable for any rapid-change systems
Optimum penetration due to low digging resistance
If the rapid-change slot of a backhoe bucket is wider than the backhoe bucket itself, this limits the digging depth. For cases such as this Liebherr offers backhoe buckets with an extended basic shape. This increases the maximum digging depth.
5
Tilt bucketTiltable ditch cleaning bucket
Rigid ditch cleaning bucket
Suitable for shaping, levelling and grading earth walls
Ideal when using a tilt rotator
Suitable for levelling and excavation
6
Backhoe bucketsBackhoe buckets are essential tools for Liebherr excavators. Due to their well thought-out geometry, the weight optimized genuine buckets are well matched to the Liebherr excavators. Good penetration characteristics and high productivity are the results.
Backhoe bucket with teeth (technical data on page 31)Applications• Typical utility jobs with medium to high break-out forces• Digging and loading of loosened material, e.g. dirt or clay
Features• Weld-on tooth adapters• Generous cutting lip thickness• Bucket back reinforcement with wear resistant material
Benefits• Buckets are optimally matched to excavator model• Versatility• Good penetration characteristic• easy filling and dumping due to improved
bucket geometry• effortless eroding possible due to long
bucket base
Backhoe bucket with cutting edge(technical data on page 31)Applications• General civil engineering• Utility• Garden- and landscaping work• Loading
Features• Weld-on cutting lip• Bucket-back reinforcements with wear
resistant material
Benefits• Efficient operation• easy grading of surfaces• easy filling and dumping due to improved bucket geometry• effortless eroding possible due to long bucket base• low digging resistance as a backhoe bucket with clip-on
cutting edge with identical bucket radius• high fuel efficiency
Backhoe bucket with teeth
8
L-shape*With a longer bottom and strongly curved side cutters. Suitable for rocky ground conditions as well as loading of hard and coarse material (large boulders) and to place rip-rap for embankment construction.
Various bucket shapes
Cutting edge shapes
Straight edge*With straight cutting lips for general loading jobs. Good floor maintenance capability.
Delta edge**With the pointed V-shaped cutting lip and pull-up single tooth at the center for difficult to break, layered material. Optimal penetration characteristics for severe ripping jobs.
V-delta edge**With the trapezoidal cutting lip and pulled-up teeth in the center for difficult to break, layered material. Optimal penetration characteristics, low torsion due to center target, limited floor maintenance capability.
V-delta Delta Straight
L-shape
starting R 936 (R 934) and for large machines
9
Bucket versions
Standard*Wear resistance cutting edge and bottom with weld-on tooth adapter. Suitable for general utility, for digging and loading of matured and loosened but not abrasive materi-al such as top soil, clay etc..
HD*Additional back- (wear- and denting protection) and side reinforcements, weld-on tooth adapters for excava-tor jobs with a higher use. Suitable for digging and loa-ding of harder and abrasive materials such as topsoil, rock, sand/clay, sand/gravel and limestone with low to medium quality.
HDV**Additional back- and side reinforcement, weld-on tooth adapter, reinforced cutting lip and additional wear parts. Suitable for extreme excavator jobs such as quarry or demolition, for digging and loading of mixed soil with high share of rock and other abrasive material such as rock, slag, quartz etc..
*starting R 936 (R 934) **only for large excavators
Standard
HD
HDV
10
The right tooth for every appl icationThe economic use of a hydraulic excavator is only possible if the tooth shape matches the relating application. Liebherr offers a broad tooth program with tooth shapes for every task.
Due to its low overall heigth and the slim, self-sharpening tooth shape the Liebherr U-system stands for best diggning behavior at lowest penetration resistance. Highly wear-resistant steel provides familiar reliability under hard conditions, which has already stood the test on wheel loaders. The lateral rolled pin fastening allows a simple and safe change of teeth.
Pointed toothHD-toothStandard tooth
Features:Pointed tooth for good penetration, reversible.
Application:for very hard and frozen soil, non-friable rock (limestone, shale, brown coal, mining of wall gravel etc.).
Features:Cap with high share of material for long service life in wear-intensive applications.
Application:for extremely abrasive soils (granite, basalt, sandstone, rocks with high share of silica etc.).
Features:symetric caps with cut-out at the front, self sharpening, reversible.
Application:for friable and medium-weight friable soils (loamy sand, gravel, soft brown coal, soft/ medium clay etc.).
Liebherr Uni tooth system: A 910 Compact (A 309) - A 918 (A 900) / R 918 - R 920 (technical data on page 38)
11
The right tooth for every appl ication
Liebherr Z tooth system: A 918 (A 900) / R 920 - R 980 SME(technical data on page 38)
The optimized tooth design leads to efficiency increase of the Liebherr Z-system on the jobsite. The low digging resistance, the self-sharpening tooth shape or the simple hammer-free change of teeth speak for the Liebherr Z-system. The teeth are made out of high-strength steel which distinguishes itself through highest wear resistance and long service life.
C-tooth
R-tooth
CL-tooth CR-tooth
P-tooth PF-tooth
Features:The conical shape allows for very good penetra-tion capacity in non-cohesive soils.
Application:Friable soils and weak non-cohesive soils, such as loose, loamy sand, fine to medium gravels, and wet or soft clay.
Features:Narrow cutting width and high wear volume for high penetrating forces and extended life.
Application:Hard-to-penetrate ground, particularly abrasivematerials, rock, i. e. limestone, shale, very hard clay, lignite.
Features:Long-drawn pointed shape with sharp cutting edge for very good penetration properties.
Application:Medium-weight friable and non-cohesive soil types up to soils with medium plasticity, such as hard, loamy sand, medium-hard clay, and fine to medium gravel.
Features:The long drawn tip allows for good penetration in broken ground and debris. The wide, thick sole of the tooth provides for a long service life even under intensive wear conditions.
Application:Abrasive soils and rocks, such as granite, basalt, and sandstone. Predominantly in combination with bottom dump bucket operations.
Features:Pointed tooth with good penetration properties even in hard stone and rocky applications.
Application:Very hard, frozen ground, non-friable rock such as compacted, unweathered clay schist
Features:Fork tip with excellent penetration properties in extremely compact soils. Can be fitted as a sup-plement to the P-tips on the bucket corners in order to retain the inclination angle.
Application:Very hard, frozen ground, non-friable rock such as compacted, non-weathered clay schist, heavy ores with medium and weak cleavage, slag heaps at steel plants.
Shrouds
Wearing cap
Wearing caps are designed to increase lifetimes of adapters in extreme abrasive applications
For precise jobs where the terrain surface must be left smooth
For tougher applications
Reduces exposure of the bucket to impacts and abrasion, extending ist wear life. Allows you to carry more material and to increase pe-netration, thereby improving productivity of the machine.
Tooth holdersingle bracket
Tooth holderdouble bracket
12
Buckets for special application
Liebherr provides its customers with buckets in the very best material quality and outstanding workmanship.
Far more than in pure earthmoving applications, they prove their worth day after day in mining operations, demolition jobs, ma-rine engineering and a string of other special applications.
With performance, dependability and profitability, they set the standard as effective excavator tools in these extraordinary jobs.
starting R 936 (R 934)
Backhoe bucket in marine engineering Backhoe bucket in demolition
14
Tilt buckets and ditch cleaning bucketsThe proven tilt buckets of the Liebherr excavators are the all-rounders for professional humus soil work and excavation. The rugged ditch cleaning buckets with patented tilt mechanism and protected, inside mounted, cylinders in various cutting widths are utilized as effective tools for grading and scarping.
Tilt bucket (technical data on page 33)Capacities of 0.6 - 2.0 m³, cutting widths of 1,500-1,800 mm also available in HD versionApplications• Slope finishing• Grading• Excavation• Loading trucksFeatures• Thick wear plate on bucket bottom• 2 x 50° tiltable both sides• Tilt cylinder installed protected• Cutting edge available as an option
(serrated upon request) Benefits• Particularly suitable for various slope angles and excavation
Ditch cleaning bucket (technical data on page 33)Capacities from 0.28 – 1.65 m3, cutting widths from 1,200 mm – 2,400 mmApplications• Profile required digging of trenches• Grading• Scraping and modeling of banks• Garden- and landscaping workFeatures• Tilt cylinder installed protected• Rigid or as an alternative 2 x 50° tiltable• Standard back-cutting edge• Continuos bottom plate• Bolt-on cutting edge available as an optionBenefits• Particularly accurate grading work• Optimal emptying in digging work• Longevity due to protected cylinders
Tilt bucket – optional with bolt-on cutting edgeDitch cleaning bucket – optional with bolt-on cutting edge
16
Examples for individual solutionsUpon request Liebherr offers the suitable working tool for almost every application. The tools are optimally matched to the excavator and consequently provide the highest digging perfor-mances. Adapting to the many types of problems, our designers have developed individual solutions in order to achieve optimal job results.
Backhoe Bucket with EjectorApplications
• For claylike and binding soil• Utility• Pipeline
Features• Mechanical or hydraulic ejector• Trench width of 300 mm – 650 mm depen-
ding on bucket version• Mountable directly to stick or to quick
coupler
Benefits• With binding material, the ejector facilitates
the emptying of the bucket
Ripper Tooth (no picture)
Applications• To loosen hard to break ground or rock
Features• Rugged design• Fitted design for good penetration cha-
racteristics• Build for most severe jobs• Use of highly wear resistant materials• Mountable directly to stick or to quick
coupler
Benefits• Dedicated tool utilization• Loose material can be quicker and
more effectively further processed
V-Buckets (no picture)
Applications• Digging of V-profile trenches• Ditch cleaning work
Features• Steady trench profile in one operation• Defined floor width• Various slope angles available
Benefits• Predetermined slope angle and floor
width provides steady trench profile
17
Examples for individual solutions
4-in1 BucketApplications
• Utility and pipeline• Back-fill work• Inner city use
Features• Shovel bucket function• Pick-up of small material volume
possible (bottom-dump-bucket)• Mountable directly to stick or to quick
coupler
Benefits• Effective utilization of back-fill work due
to flexible operation
Marine BucketApplications
• Dredging of channels• Embankments• Pipeline construction
Features• Water drainage holes for optimal
fill factor• Sealed bearings• Dedicated teeth possible
Benefits• Effective work under water, even
with difficult material
18
Hydraulic tilt-rotator
Liebherr-Proportional-Control for intuitive control of working tools Protected cylinders, no extruding parts
Applications• Challenging profiling• Pipeline• Garden- and landscaping work• Complex digging work
Features• 360° infinite rotation• best possible protection for tilt and swing drive• Tiltable both sides by 50°• Rugged design
Benefits• Increase of the productive worktime (accurate
excavation, precise backfilling and quick profiling)• Expanded utilization of the excavator• Highly accurate due to easy handling• Significant time savings since excavator needs repositioning less often• Everything from one source• Liebherr excavator controls include tilt-rotator function• Backhoe bucket can also be used as a face shovel
Tilt rotators have today become an essential part of civil engineering. Thanks to the flexible use of the backhoe bucket, the unproductive repositioning of the hydraulic excavator during work can be substantially reduced, and the productivity of the machine is increased.Lieberr tilt rotators have a slewing angle of 2 x 50º and can rotate infinitely through 360º. The integrated rotating cylinder itself, which is protected and located horizontally, has no projecting parts even at maximum rotating angle, which could otherwise be damaged when working in confined spaces. This ensures that servicing costs are kept low, and makes Liebherr tilt rotators the ideal tool for working in lining operations or when close to building structures. In conjunction with the ergonomic Liebherr proportional control system, the tilt rotator can be put to use rapidly, with fine sensitivity, and with maximum precision, which helps achieve high productivity for the hydraulic excavator.The preparation of complex excavation contours and the exposing of existing structural elements such as drain shafts, pipes, etc. can be carried out extremely rapidly with Liebherr tilt rotators. Tedious and sometime dangerous shaft excavation by hand can be reduced to a minimum, and personnel can move on to the next tasks to be dealt with.It is recommended that Liebherr tilt rotators be fitted on the upper side with the Likufix quick coupling system from Liebherr. In this way, the tilt rotator is only attached when it is actually needed, which reduces fuel consumption, increases the service life of the tilt rotator, and allows for the maximum load capacity of the hydraulic excavator to be fully exploited during hoisting operations. In traditional earthmoving situations, taking off the tilt rotator allows for the largest possible backhoe bucket to be fitted, in order to achieve high handling performance with low fuel consumption.Together with Liebherr wheel and crawler excavators, Liebherr tilt rotators attain maximum productivity, reliability, and safety on the construction site.
19
Installation possibilities of the tilt rotator
Tilt± 50°
360° infinite rotation
Equipment of excavator Movement possibilities
Middle pressure lines and Liebherr quick coupler (mech. or hydr.)
Turning or swiveling (changeover via rocker switch in joystick)
Middle pressure lines, high pressure lines and Liebherr quick coupler (mech. or hydr.)
Turning or swiveling simultaneously
Middle pressure lines, high pressure lines and LIKUFIX
Turning or swiveling simultaneously
Middle pressure lines and third party quick coupler
Turning or swiveling (changeover via rocker switch in joystick)
Middle pressure lines, high pressure lines and third party quick coupler
Turning or swiveling simultaneously
20
ClamshellsNext to the backhoe bucket, the clamshell is one of the most important digging tools in the utility business. The clamshell selection is based on the ground condition, the specific mate-rial weight and the required production performance. The selection of the entire clamshell attachment is significant in order to determine the required digging depth.
Clamshell (technical data on page 36)Capacities from 0.1– 0.9 m3, shell width from 300–1,200 mm
Applications• Narrow and deep trench digging, also over the side• Loading and unloading and handling of various bulk goods,
respectively• Excavation• Special excavating (e.g. round shells)
Features• Infinite rotation• Optimally matched to machine size• Rugged design• Protected cylinder• Depending on application with or without teeth• Optional ejectors for digging shells available• HD-version for severe jobs• Quick-change system applicable• Grab extension available as an option
Benefits• Accurate and secure placement of material of all
type due to maneuverability and high closing force• Optional different shell width adaptable
to one mechanism• Well-thought-out design with
Liebherr components
Round-hole grabQuick change clamshells (quickly changeable)
22
Liebherr demolition and sorting grapplesThe demolition and sorting grapples are designed for both demolition and for material handling applications. They also optimize the use of the hydraulic excavator at the construction site. Sorting, loading or even demolition, they can handle so easily. The stone grapple is a special type of the demolition and sorting grapple. Their shape makes it ideal for setting and loading stones.
Sorting grapple (technical data on page 37)• Capacity up to 0.5-1.3 m3
Job reports• Sorting operations on construction sites• Demolition work• Quarry and waterway construction work
Features• Solid Liebherr components• Optimum own weight• Easy maintenance and service-friendly• Sealed bearing points• Optimum lubrication system• Endless hydraulic slewing device• Complete hydraulic inside
Benefits• High closing force• Lightweight construction• Sensitive working on sorting activities• Different tine shapes for individual applications
Sorting grapple (perforated)
24
Functionality
Pipe-laying toolThe pipe-layer developed by Liebherr enables significant productivity increase when laying sewage pipes. The pipe is picked up, positioned at the end of a pipe already in place, aligned and inserted into the previously installed pipe in accordance with existing standards using a horizontal ram. The pipe-layer enables quick and efficient installation of pipes of various lengths, diameters, weights, materials and nominal sizes. Thanks to this system, operational safety on pipe-laying sites is raised considerably, since no one is forced to remain in the dan-ger area.
Applications• Sewage construction• Pipe-laying jobs• Highway construction• Development
Features• For pipes up to a length of 3.50 m• Pipes with outer diameter of 450 up to 800 mm installable• Pipes up to 230 mm outer diameter can be installed as an option• Curb weight appr. 1,400 kg• Lift capacity: approx. 1,500 kg• Solid construction• 360° endlessly turnable• Adapter for plastic pipes deliverable• With LIKUFIX or universal adapter• Pipe feed: manual changeover on unit, alternatively from the operator’s cab• Suitable for excavators starting A 918 (A900) / R 918 (R 900)
Benefits• Excellent pipe-laying performance• Operation in accordance with existing standards• Adjustable insertion pressure, thus less pipe damages• Simple and quick unloading of delivered pipes• Excellent operational safety, no person permanently in the direct danger zone• Minimum 10% productivity increase• Pipes can be layed from any direction and independent from any incline• Space saving in confined spaces: the Liebherr pipe laying unit hardly needs
more space than the pipe itself
Position
26
Material classification
1) The actual values depend upon moisture content, grain size and compaction. Tests are required to determine exact material characteristics.
Spe
cific
wei
ght1)
kg
/m3 /
bank
Sw
ell f
acto
r %
Sw
ell f
acto
r
Sp
ecifi
c w
eigh
t kg
/m3/lo
ose
MaterialWeathered material -
75% rock, 25% dirt 2,790 42 0.70 1,960
50% rock, 50% dirt 2,280 33 0.75 1,720
25% rock, 75% dirt 1,960 24 0.80 1,570
Basalt 2,970 52 0.66 1,960
Bauxite, Kaolin 1,900 33 0.75 1,420
Topsoil dry compact 1,900 26 0.79 1,510
wet loosened 2,020 26 0.79 1,600
Clay 1,540 23 0.81 1,250
Gypsum broken 3,170 75 0.57 1,660
crushed 2,790 68 0.60 1,670
Granite broken 2,730 64 0.61 1,660
Limestone broken 2,610 69 0.59 1,540
crushed - - - 1,540
Gravel moist 2,170 12 0.89 1,930
dry 1,690 12 0.89 1,510
(accord. to DIN 18300)
Spe
cific
wei
ght1)
kg
/m3 /
bank
Sw
ell f
acto
r %
Sw
ell f
acto
r
Sp
ecifi
c w
eigh
t kg
/m3/lo
ose
MaterialClay natural bed 2,020 22 0.82 1,660
dry 1,840 24 0.80 1,480
wet 2,080 24 0.80 1,660
Clay with gravel dry 1,660 17 0.86 1,420
wet 1,840 19 0.84 1,540
Topsoil 1,370 44 0.69 950
Natural stone crushed 2,670 67 0.60 1,600
Sand dry loose 1,600 12 0.89 1,420
moist 1,900 12 0.89 1,690
wet 2,080 13 0.88 1,840
Sand with clay loose 2,020 26 0.79 1,600
compacted - - - 2,400
Sand with gravel dry 1,930 12 0.89 1,720
wet 2,230 10 0.91 2,020
Limestone 2,520 67 0.60 1,510
Slag broken 2,940 68 0.60 1,750
27
Class 1: Top soilTop soil is the most upper layer of the ground, which contains besides in-organic matters, e.g. gravel-, sand-, silt- and clay mixes as well as humus and organic organisms.
Class 2: Fluid materialMaterial of fluid or mushy composition from which water is not easily drained.
Class 3: Easy diggable materialNon-cohesive to semi-cohesive sand, gravel and sand-gravel mixture with up to 15 weight-% addition of silt and clay (grain size less than 0.06 mm) and with maximum of 30 weight-% of rocks of larger than 63 mm grain size up to 0.01 m3 volume. Organic material with low water content (e.g. compacted peat).
Class 4: Medium diggable materialMixture of sand, gravel, silt and clay with a share of more than 15 weight-%, grain sizes smaller than 0.06 mm. Cohesive material of light to medium malleability, which are soft to semi-firm depending on the water content and with no more than 30 weight-% of rocks larger than 63 mm grain size up to 0.01 m3 volume.
Class 5: Tough to penetrate materialMaterial accord. to class 3 an 4, but with more than 30 weight-% of rocks larger than 63 mm grain size up to 0.01 m3 volume. Non-cohesive and cohesive material with no more than 30 weight-% rocks larger than 0.01 m3 volume. Particularly plastic clay, soft to medium hard depending on the water content.
Class 6: Easy to penetrate rock and comparable materialRock, which has an internal, mineral bund cohesion, but severely frac-tured, brittle, crumbly, slated, soft or weathered as well as comparably compact or solidified non-cohesive and cohesive material with more than 30 weight-% rocks of more than 0.01 m3 to 0.10 m3 volume.
Class 7: Tough to penetrate rockRock, which has an internal, mineral bund cohesion and high structural density and is only slightly fractured or weathered. Highly compact, un-weathered clay slate, sedimentary rock layers, slag heaps at iron and steel works and similar. Rocks of larger than 0.10 m3 volume.
(accord. to DIN 18300)
Basis of calculationEach material, extracted from its natural position whether by blasting or other means, grows in volume. This increase in volume is measured in % or is given as a ratio.
Swelling (%) = ( -1) X 100%
Swell factor =
volume after breakinggrown volume
100%100% + swelling
28
LIKUFIXWhat is LIKUFIX?LIKUFIX is a hydraulic quick-change system combined with an automatic hydraulic couplingdevice which was designed by Liebherr. LIKUFIX allows quick and safety changing of mechanical and hydraulic attachments for hydraulic excavators, directly from the cab.
The technical advantages:• Fully automatic play compensation• Tight connection between the hydraulic circuits thanks to the hydro-mechanical compensation system• More than 25 years experience in fully-automatic coupling systems• Reliable system with long service life• No problem at all in converting an existing hydraulic quick change system to LIKUFIX
The convenience advantage:• Reliable hydraulic connection free of oil leaks• Low operating and maintenance costs• Add-on parts can be changed from the cab
The economic advantage:• Easy equipping of existing hydraulic excavators• Hydraulic add-on parts changed in a matter of seconds – meaning better machine utilisation with different applications on the same unit• Major time savings in comparison with hydraulic-hose changes• Low operating and maintenance costs with maximum productivity• Carefully selected use of the add-on parts for long tool service life
Coupling into the unit Connected to the unit, mechanically and hydraulically
Moving to the unit
29
Hydraulic excavator - short summary of mounting possibilitiesThe extension is also possible for Liebherr material handling machines and similar machines of competitiors.
Liebherr quick coupler sizes
* on request
Operating weight kg
SW 22 SW 33 SW 48 SW 66 SW 77 SW 92
Qui
ck
coup
ling
sys
tem
s QC Mechanical • • • • •
QC Hydraulic • • • • •
LIKUFIX • • • •
Lieb
herr
hyd
raul
ic e
xcav
ato
r m
od
els
Competition machines 8,000 - 10,000 M M/H/L
A 910 Compact (A 309) 11,600 - 12,800 M M/H/L
A 912 Compact (A 311) 12,700 - 14,100 M M/H/L
A 914 Compact (A 312) 14,700 - 16,600 M/H/L M/H/L
A 914 (A 314) 15,200 - 17,500 M/H/L M/H/L
R 914 Compact (R 313) 15,100 - 17,500 M/H/L M/H/L
A 916 (A 316) 16,800 - 19,000 M/H/L M/H/L
A 918 Compact 17,500 - 19,500 M/H/L M/H/L
A 918 (A 900) 17,700 - 19,900 M/H/L M/H/L
R 918 (R 317) 18,150 - 21,750 M/H/L M/H/L
A 920 (A 904) 18,900 - 21,700 M/H/L
R 920 (R 900) 20,200 - 23,500 M/H/L
R 922 (R 906 Advanced - Classic) 21,350 - 23,600 M/H/L
A 924 21,400 - 26,500 M/H/L
R 924 (R 916 Advanced - Classic) 23,500 - 27,600 M/H/L
R 924 Compact 25,150 - 29,050 M/H/L
R 926 (R 926 Advanced - Classic) 25,700 - 28,950 M/H/L
A 928 (A 924 Plus) 26,500 - 27,600 M/H/L
R 936 (R 934) 30,550 - 33,850 M/H/L
R 946 (R 944) 38,050 - 41,600 M/H/L
R 950 SME 42,950 - 44,800 M*/H/L*
R 956 (R 954) 49,600 - 57,100 M/H/L
R 960 SME 58,980 - 60,600 M*/H/L*
R 966 (R 964) 66,000 - 76,300 H
R 970 SME 76,800 - 78,600 H
R 976 (R 974) 85,300 - 95,500 H
R 980 SME 93,900 - 97,800 H
30
Backhoe bucket with
teeth
Backhoe bucketwith cutting
edge
Ditch-cleaning-bucket
Tilting bucket
STD HD HDV STD HD tiltable rigid
A 910 Compact (A 309) • • • •
A 912 Compact (A 311) • • • •
A 914 Compact (A 312) • • • • • • •
A 914 (A 314) • • • • • • •
R 914 Compact (R 313) • • • • • • •
A 916 (A 316) • • • • • • •
A 918 Compact • • • • • • •
A 918 (A 900) • • • • • • •
R 918 (R 317) • • • • • • •
A 920 (A 904) • • • • • • •
R 920 (R 900) • • • • • • •
R 922 (R 906 Advanced - Classic) • • • • • • •
A 924 • • • • • • •
R 924 (R 916 Advanced - Classic) • • • • • • •
R 924 Compact • • • • • • •
R 926 (R 926 Advanced - Classic) • • • • • • •
A 928 (A 924 Plus) • • • • • • •
R 936 (R 934) • • • • • •
R 946 (R 944) • • • • • • •
R 950 SME • • •
R 956 (R 954) • • • •
R 960 SME • • •
R 966 (R 964) • • • •
R 970 SME • • • •
R 976 (R 974) • • •
R 980 SME • • •
Backhoe bucket line
31
A 910 Compact (A 309) / A 912 Compact (A 311) with SW 33
A 914 Compact (A 312) / R 914 Compact (R 313) /A 914 (A 314) with SW 481)
Width Teeth Cutting edge
HD (with teeth)2)
Width Teeth Cutting edge
HD (with teeth)2)
mm m3 kg m3 kg m3 kg mm m3 kg m3 kg m3 kg
3003) 0.15 160 0.15 150 - - 3003) 0.17 270 0.18 260 0.17 300
4003) 0.20 190 0.21 180 - - 4003) 0.24 290 0.26 280 0.24 320
450 0.20 170 0.21 160 - - 5003) 0.32 280 0.34 270 0.32 320
550 0.22 190 0.24 190 - - 650 0.36 300 0.39 290 0.36 340
650 0.27 210 0.30 210 - - 850 0.50 350 0.53 340 0.50 400
750 0.33 230 0.35 220 - - 1,050 0.65 400 0.71 390 0.65 450
850 0.38 240 0.42 240 - - 1,250 0.80 450 0.87 430 0.80 510
950 0.44 270 0.48 270 - - - - - - - - -
A 914 Compact (A 312) / R 914 Compact (R 313) / A 914 (A 314) with SW 331)
A 916 (A 316) / A 918 Compact / A 918 (A 900) / A 900 ZW / R 918 (R 317) / R 920 (R 900) with SW 48
3003) 0.17 220 0.18 210 0.17 250 3003) 0.17 270 0.18 260 0.17 300
4003) 0.24 250 0.26 240 0.24 280 4003) 0.24 290 0.26 280 0.24 320
500 0.32 250 0.30 240 0.28 280 5003) 0.32 290 0.34 280 0.32 330
550 0.29 260 0.31 250 0.29 290 650 0.45 400 0.45 380 0.45 440
650 0.36 290 0.39 270 0.36 320 850 0.60 430 0.65 410 0.60 480
850 0.50 340 0.53 320 0.50 380 1,050 0.80 510 0.85 490 0.80 570
1,050 0.65 380 0.71 370 0.65 430 1,250 0.95 560 1.05 530 0.95 630
1,250 0.80 430 0.87 420 0.80 490 - - - - - - -
A 916 (A 316) / A 918 Compact / A 918 (A 900) / A 900 ZW / R 918 (R 317) / R 900 with SW 33
A 920 (A 904) / R 922 (R 906) / R 924 Compact with SW 48
- - - - - - - 3003/4) 0.17 270 0.18 260 0.17 300
- - - - - - - 4003/4) 0.24 290 0.26 280 0.24 320
- - - - - - - 5003/4) 0.32 290 0.34 280 0.32 330
3003) 0.17 220 0.18 210 0.17 250 650 0.55 510 0.60 530 0.55 570
4003) 0.24 250 0.26 240 0.24 280 850 0.60 550 0.65 590 0.60 620
500 0.32 290 0.32 270 0.30 320 1,050 0.80 630 0.85 670 0.80 710
650 0.45 350 0.45 330 0.45 390 1,250 1.00 730 1.05 770 1.00 820
850 0.60 400 0.65 380 0.60 450 1,400 1.15 790 1.20 840 1.15 880
1,050 0.80 480 0.85 460 0.80 540 - - - - - - -
1,250 0.95 520 1.05 500 0.95 590 - - - - - - -
Bucket A 910 Compact (A 309) - R 906
The attaching tool permitted for the corresponding machine configuration you can see from the relating excavator brochure.1) HD-bucket for A 914 Compact (A 312) not available 2) HD-version also available with cutting edge 3) Backhoe bucket with limited digging depth4) only after consultation
32
1) HD-version also available with cutting edge 2) also available with increased content by arrangement3) Backhoe bucket with limited digging depth 4) only after consultation
R 936 (R 934) / R 946 (R 944) / R 950 SME
Width STDTeeth (Z50)
HD Teeth (Z50)
mm m3
kg m3
kg
1,050 0.95 860 0.95 1,050
1,250 1.15 960 1.15 1,160
1,400 1.35 1,020 1.35 1,270
1,500 1.75 1,470 1.75 1,520
1,650 2.00 1.600 2.00 1,700
1,650 - - 2.25 1,850
1,800 - - 2.50 2,000
R 956 (R 954) / R 960 SME Teeth (Z70) Teeth (Z70)1,300 1.65 2,100 - -
1,500 2.00 2,250 - -
1,550 - - 2.00 2,800
1,700 2.35 2,500 - -
1,750 - - 2.35 3,050
1,900 2.70 2,650 - -
1,950 - - 2.70 3,300
2,100 - - 3.25 3,400
2,250 - - 3.50 3,700
R 966 (R 964) / R 970 SME Teeth (Z70) Teeth (Z90)1,550 2.50 2,950 2.00 3,300
1,750 3.00 3,150 2.50 3,500
1,950 3.50 3,450 3.00 3,800
2,100 - - 3.50 4,150
2,150 4.00 3,650 - −
2,400 4.50 3,850 4.00 4,350
2,600 5.00 4,100 - −
R 976 (R 974) / R 980 SME Teeth (Z90) Teeth (Z90)1,550 3.20 3,500 - −
1,750 3.80 3,750 3.60 4,150
1,900 4.30 3,950 4.10 4,500
2,100 4.80 4,200 4.60 4,800
2,250 5.80 4,550 - −
2,400 - - 6.20 6,350
A 924 / A 928 (A 924 Plus) / R 924 (R 916) / R 926 (R 926 Advanced - Classic)
Width Teeth Cutting edge
HD (with teeth)1)
mm m3 kg m³ kg m³ kg
3003/4) 0.17 270 0.18 260 0.17 300
4003/4) 0.24 290 0.26 280 0.24 320
5003/4) 0.32 290 0.34 280 0.32 330
650 0.55 540 0.60 530 0.55 600
850 0.75 650 0.80 630 0.75 690
1,050 0.95 720 1.05 720 0.95 800
1,250 1.15 810 1.30 800 1.15 910
1,400 1.35 880 1.50 870 1.35 960
1,400 1.502) 880 1.702) 870 1.50 960
1,500 1.452) 890 1.652) 890 1.45 1,000
1,600 1.552) 950 1.752) 980 1.55 1,060
Backhoe bucket with SW 48, A 924 - R 926 (R 926 Advanced - Classic)
Backhoe bucket R 936 (R 934) - R 974
33
Tilt buckets / Ditch cleaning buckets with SW 33, A 910 Compact (A 309) - R 920 (R 900)
A 910 Compact (A 309)
Width Tiltable ditch cleaning bucket2)
Rigid ditch cleaning bucket
Tilt bucket2)
mm m3 kg m³ kg m³ kg
1,200 0.29 385 - - - -
1,300 0.28 300 - - - -
1,5001) 0.33 330 0.33 210 - -
1,500 0.36 420 - - - -
A 912 Compact (A 311)1,200 0.29 385 - - - -
1,5001) 0.33 330 0.33 210 - -
1,500 0.36 420 - - - -
1,7001) 0.37 390 - - - -
1,700 0.41 455 - - - -
2,000 - - 0.45 270 - -
A 914 Compact (A 312) 1,500 - - 0.50 360 0.60 660
1,600 0.55 640 - - - -
2,000 0.50 660 0.48 350 - -
2,000 - - 0.65 390 - -
A 914 (A 314) / R 914 Compact (R 313)1,500 - - 0.50 360 0.60 660
1,600 0.55 640 - - - -
2,000 0.50 660 0.48 350 - -
2,000 - - 0.65 390 - -
A 916 (A 316) 1,500 - - 0.50 360 0.60 660
1,600 0.55 640 - - 0.80 740
1,600 0.80 770 - - - -
2,000 0.50 660 0.48 350 - -
2,000 - - 0.65 390 - -
A 918 (A 900) / R 918 (R 317) / R 920 (R 900)1,500 - - 0.50 360 0.60 660
1,600 0.55 640 - - 0.80 740
1,600 0.80 770 - - - -
2,000 0.50 660 0.48 350 - -
2,000 0.70 790 0.65 390 - -
The attaching tool permitted for the corresponding machine configuration you can see from the relating excavator brochure.1) 2 x 45° tiltable 2) 2 x 50° tiltable
34
Tilt buckets / Ditch cleaning buckets with SW 48, A 914 Compact (A 312) - R 926 (R 926 Adv.-Cl.)
A 914 Compact (A 312) / A 914 (A 314) / R 914 Compact (R 313)
Width Tiltable ditch cleaning bucket1)
Rigid ditch cleaning bucket
Tilt bucket1)
mm m3 kg m3 kg m3 kg
1,500 - - - - 0.60 680
1,600 0.55 690 - - - -
2,000 0.50 690 0.48 400 - -
A 916 (A 316) 1,500 - - 0.50 430 0.60 680
1,600 0.55 690 - - - -
1,600 0.80 850 - - - -
2,000 0.50 690 0.48 400 - -
A 918 (A 900) / R 918 (R 317) / R 920 (R 900)1,500 - - 0.50 430 0.60 680
1,600 0.55 690 - - 0.80 820
1,600 0.80 850 - - - -
2,000 0.50 690 0.48 400 - -
2,000 0.70 880 - - - -
A 920 (A 904) / R 922 (R 906 Adv.-Cl.)1,500 - - 0.50 430 1.20 970
1,600 0.55 690 - - 0.80 820
1,600 0.80 850 - - 1.00 890
2,000 0.50 690 0.70 520 - -
2,000 0.70 880 - - - -
2,000 1.00 940 - - - -
2,200 0.80 880 - - - -
2,200 1.15 980 - - - -
2,400 0.85 890 - - - -
A 924 / A 928 (A 924 Plus) / R 924 Compact / R 924 (R 916 Adv.-Cl.) / R 926 (R 926 Adv.-Cl.)1,500 - - 0.50 430 1.20 970
1,600 0.80 850 - - 0.80 820
1,600 - - - - 1.00 890
1,600 - - - - 1.35 970
1,600 - - - - 1.55 1,120
2,000 0.50 690 0.70 520 - -
2,000 0.70 880 1.20 640 - -
2,000 1.00 940 - - - -
2,200 0.80 880 - - - -
2,200 1.15 980 - - - -
2,200 1.40 1,000 - - - -
2,400 0.85 890 0.85 610 - -
2,400 1.25 1,000 - - - -
1) 2 x 50° tiltable
C
50°
A
B
35
Tilt buckets / Ditch cleaning buckets R 936 (R 934) - R 946 (R 944)
R 936 (R 934) / R 946 (R 944)
Width Tiltable ditch cleaning bucket1)
Rigid ditch cleaning bucket
Tilt bucket1)
mm m3 kg m3 kg m3 kg
1,600- - - - 1.45 1,530
- - - - 1.75 1,630
1,700 - - - - 1.85 1,700
1,800- - - - 1.60 1,620
- - - - 2.00 1,750
2,0000.70 1,350 0.70 550 - -
1.45 1,600 - - - -
2,2001.65 1,590 - - - -
1.65 1,660 - - - -
2,4000.85 1,480 0.85 635 - -
1.45 1,610 1.15 685 - -
The attaching tool permitted for the corresponding machine configuration you can see from the relating excavator brochure.1) 2 x 50° tiltable
1) LH-TR 20 with SW 33, LH-TR 25 with SW 48
Hydraulic tilt-rotator
LH-TR 20 LH-TR 25
Model classification A 914 (A 314) -A 918 (A 900) / R 920 (R 900)
A 918 (A 900) / R 920 (R 900) - R 936 (R 934)
weight1) 470 kg 720 kg
A1) 600 mm 680 mm
B 870 mm 880 mm
C1) 220 mm 315 mm
D
C
E
BA
36
Clamshell
Clamshell
CapacityA
Shellwidth
B Opening
C Heigth open
DHeigth closed
E Span width
Weight
GM 5B m3 mm mm mm mm mm kg
0.10 300 1,195 1,070 1,400 1,343 4100.13 400 1,195 1,070 1,400 1,343 4400.20 600 1,195 1,070 1,400 1,343 4700.27 800 1,195 1,070 1,400 1,343 510
GM 8B0.17 320 1,520 1,990 2,420 1,645 7100.22 400 1,520 1,990 2,420 1,645 7500.30 600 1,450 1,920 2,385 1,575 7500.40 800 1,450 1,920 2,385 1,575 800
GM 10B0.17 320 1,530 2,685 2,440 1,697 7700.22 400 1,530 2,685 2,440 1,697 8200.35 600 1,530 2,685 2,440 1,697 8600.45 800 1,530 2,685 2,440 1,697 9100.60 1,000 1,530 2,685 2,440 1,697 970
GM 20B0.45 600 1,955 1,920 2,420 1,650 1,1600.60 800 1,955 1,920 2,420 1,650 1,2100.75 1,000 1,955 1,920 2,420 1,650 1,2850.90 1,200 1,955 1,920 2,420 1,650 1,350
Wheeled Excavator
A 910 Compact (A 309)
A 912 Compact (A 311)
A 914 Compact(A 312)
A 914(A 314)
A 916(A 316)
A 918(A 900)
A 920(A 904)
A 924A 928 (A 924 Plus)
Crawler Excavator
R 914 Compact (R 313)
R 918(R 317)
R 920(R 900)
R 922(R 906)
R 916 R 924 R 926
Grab mechanism GM 5B GM 5B GM 5B GM 5B
Grab mechanism GM 8B GM 8B GM 8B GM 8B
Grab mechanism GM 10B GM 10B GM 10B GM 10B
Grab mechanism GM 20B GM 20B*
* for A 928 (A 924 Plus)
BA
C
D
37
Sorting grapples
Capacity Shell width
Closing force
AHeigth closed
B Heigth open
CWidth open
DWidth closed
Weight
SG 25 m3 mm t mm mm mm mm kg
Corrugated0.50 800 6 1,510 1,380 1,970 1,380 1,100
0.65 1,000 6 1,510 1,380 1,970 1,380 1,180
Perforated0.55 800 6 1,510 1,380 1,970 1,380 1,050
0.75 1,000 6 1,510 1,380 1,970 1,380 1,100
Rock grapple 0.55 800 6 1,620 1,635 2,200 1,460 1,240
SG 30
Corrugated0.75 1,000 8 1,625 1,485 2,140 1,515 1,510
0.90 1,150 8 1,625 1,485 2,140 1,515 1,590
Perforated0.85 1,000 8 1,625 1,485 2,140 1,515 1,490
1.00 1,150 8 1,625 1,485 2,140 1,515 1,570
Rock grapple 0.80 1,050 8 1,730 1,780 2,315 1,530 1,765
SG 40Corrugated 1.10 1,100 10 1,920 1,740 2,560 1,790 2,360
Perforated 1.30 1,100 10 1,920 1,740 2,560 1,790 2,230
Shells perforated (standard) Shells ribbed (option) Rock grapple
= best for standard applications= Consultation with manufacturer required since only permitted for certain applications= for extremely heavy applications on this excavator
Wheeled Excavator
Standard Longfront
A 914(A 314)
A 916(A 316)
A 918(A 900)
A 920(A 904)
A 924A 928 (A 924 Plus)
Crawler Excavator
R 914 Compact (R 313)
R 918(R 317)
R 920(R 900)
R 922(R 906)
R 924 (R 916)
R 926(R 926)
R 936(R 934)
R 946(R 944)
R 956(R 954)
R 936(R 934)
R 946(R 944)
R 956(R 954)
R 976(R 974)
SG 25
SG 30
SG 40
38
Liebherr Uni tooth system
Elements Tooth size
Uni 25-2 Uni 35-3
Tooth holder • •
Tooth shape
Pointed • •
Standard • •
HD • •
Roll pin • •
Cotter pin driver • •
Liebherr Z tooth system
• availableOrder numbers are available from your service partner.
ElementTooth size
35 40 50 70 90Tooth holder
single bracket*• •
Tooth holderdouble bracket
• • • • •
Tooth form
C • • • • •
CL • • • • •
P • • • • •
PF • • •
CR • •
R • • • •
Lip shrouds
Length: 240
Middle • •
Left • •
Right • •
Length: 280
Middle • •
Left • •
Right • •
Length: 320
Middle •
Left •
Right •
Side shrouds protection
Thickness of sheet plate
30 to 50 LS*** • •
50 to WS 50** •
* for precise grading work, ** High impact resistance, *** Higher bucket capacity• availableOrder numbers are available from your service partner.
39
• available
Hydraulic excavator model Tooth system Uni Tooth system Z
U25-2 U35-3 Z35 Z40 Z50 Z70 Z90
A 910 Compact (A 309) •
A 912 Compact (A 311) •
A 914 Compact (A 312) •
A 914 (A 314) •
R 914 Compact (R 313) •
A 916 (A 316) • •
A 918 Compact • •
A 918 (A 900) • •
R 918 (R 317) • •
A 920 (A 904) •
R 920 (R 900) •
R 922 (R 906 Advanced - Classic) •
A 924 •
R 924 (R 916 Advanced - Classic) •
R 924 Compact •
R 926 (R 926 Advanced - Classic) •
A 928 (A 924 Plus) •
R 936 (R 934) • •
R 946 (R 944) • •
R 950 SME • •
R 956 (R 954) •
R 960 SME •
R 966 (R 964) • •
R 970 SME •
R 976 (R 974) •
R 980 SME •
Assignment to machine types
The Liebherr Group of Companies
Wide Product RangeThe Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr’s highvalue products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes.
Exceptional Customer BenefitEvery product line provides a complete range of models in many different versions. With both their technical excel lence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application.
State-of-the-art TechnologyTo provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured inhouse, for instance the entire drive and control techno logy for construction equipment.
Worldwide and IndependentHans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 130 companies with over 39,000 employees located on all continents. The corporate headquarters of the Group is LiebherrInternational AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company.
www.liebherr.com
Liebherr-Hydraulikbagger GmbHLiebherrstraße 12, D-88457 Kirchdorf / Iller +49 7354 80-0, Fax +49 7354 80-72 94www.liebherr.com, E-Mail: [email protected]/LiebherrConstruction
Pri
nted
in G
erm
any
by
Eb
erl
BK
-RP
LH
B 1
033
034
1-2-
12.1
4_e
nGB
S
ubje
ct t
o te
chni
cal m
od
ifica
tions
.