Fin

al

Pro

gra

mPVP 2013

2013 Pressure Vessels & Piping Conference

The International Scene of PressureVessels and Piping

July 14–18, 2013

Paris Marriott Rive Gauche

Hotel & Conference Center

Paris, France

2

Welcome to PVP 2013Welcome to Paris, France for the 2013 ASME Pressure Vessels & Piping Conference. The PVP Conference is known to be the outstanding international technical forumfor participants to further their knowledge-base through exposure to diverse engineering topics and dissemination of cutting–edge technology related to pressure vesseland piping technologies for the power and process industries. We look forward to fruitful technical exchanges between participants from Europe, Africa, the Middle East,Asia, the Americas and the Oceania Islands. Our Conference continues to shape the technology in the pressure vessel industry on a truly global basis. The ASME Non-destructive Evaluation (NDE) Engineering Division is also participating.This year, the Conference Technical Program contains approximately 750 technical papers and presentations organized into approximately 190 technical and paneldiscussion sessions, three technical tutorials, two special tutorials, two workshops, and our outstanding Student Paper Competition. The NDE and Software Demonstrationforums are also organized as part of our technical program. Technical papers presented in this Conference are separated into tracks, according to their technical areas, and are available at the Conference in the form of a CD-ROM.A key component of every PVP Conference is the opportunity to socialize and make new friends— this year’s conference offers several great possibilities. Enjoy theParis City Tour on Monday—this bus tour will show you numerous famous locations in Paris with two stops for picture taking opportunities. Monday evening we allmeet at the Conference-Wide Reception which will be held in the La Seine Ballroom. The Orsay Museum tour on Tuesday features magnificent architecture coupledwith a guided tour to view some of the thousands of paintings, sculptures, and other objects housed in the museum. Additional details regarding these tours can befound later in this program.

PVP 2013 Program Layout

SundayJuly 14, 2013

MondayJuly 15, 2013

TuesdayJuly 16, 2013

WednesdayJuly 17, 2013

ThursdayJuly 18, 2013

7:30 am8:15 am

ArrivalRegistration Opens

(8:00 am – 6:00 pm)

Authors’Breakfast/BriefingRegistration Open

(7:30 am – 4:00 pm)

Authors’Breakfast/BriefingRegistration Open

(7:30 am – 4:00 pm)

Authors’Breakfast/BriefingRegistration Open(7:30 am – noon)

Authors’Breakfast/BriefingRegistration Open

(7:30 am – 3:00 pm)

8:30 am10:15 am

Technical Workshop(9:00 am – 11:30 am)

Block 1.1Special Tutorial

Technical SessionsNDE Demo

Block 2.1TPR & Session

Developer TrainingTechnical Sessions

Software Demo

Block 3.1Technical Sessions

Block 4.1Technical Sessions

10:30 am12:15 pm Open

Block 1.2Plenary Session

NDE Demo

Block 2.2Technical Sessions

Software Demo

Block 3.2Technical Sessions

Block 4.2Technical Sessions

12:15 pm1:45 pm

LunchTechnical Committee

Meetings

LunchTechnical Committee

Meetings

Honors & AwardsLuncheon

(12:30 pm – 2:15 pm)Lunch

2:00 pm3:45 pm

Technical Workshop(1:00 pm – 3:30 pm)

Block 1.3Technical Sessions

NDE Demo

Block 2.3Technical Sessions

Software Demo

Block 3.3Open

Block 4.3Technical Sessions

4:00 pm5:45 pm

Special Tutorial (4:00 pm – 6:00 pm)

Block 1.4Technical Sessions

NDE Demo

Block 2.4Technical Sessions

Software Demo

Block 3.4Open

Block 4.4Technical Sessions

Conference Evaluation

Evening OpenConference-Wide

Reception(6:15 pm – 8:00 pm)

Open Open Open

Index to ProgramAuthors Breakfast/Briefing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 PVP Conference Organizer Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Call for Papers (PVP-2012) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 67 Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Committee Meetings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Registration Hours, Fees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Cooperating Societies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Session Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–54Disabled Registrants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Session Titles by Session Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–13Guest/Family Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Social Programs & Tours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Honors and Awards Luncheon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–5 Society & Division Officers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4Hotel Floor Plans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65–66 Software Forum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Index of Authors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58–64 Sponsors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . back coverIndex of Session Chairs & Co-Chairs . . . . . . . . . . . . . . . . . . . . . . . . . . . .55–57 Student Paper Symposium & Competition . . . . . . . . . . . . . . . . . . . . . . . . . 7–8NDE Forum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Tax Deductibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Opening Ceremony & Plenary Session (PVP) . . . . . . . . . . . . . . . . . . . . . . . . .4 Workshops and Tutorials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6Professional Development Hours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3

The American Society of Mechanical EngineersPressure Vessels & Piping Division

PVP 2013 Conference Committees

Ronald S. Hafner Michael E. NitzelConference C0-Chair Conference Co-Chair

Daniel T. Peters Sam Y. ZarmikTechnical Program Chair Conference Advisor

PVP Technical Program Representatives Codes & Standards Jinyan Zheng, Bostjan BezensekComputer Technology & Bolted Joints Jose VeigaDesign & Analysis Sujay Krishnamurthy Fluid-Structure Interaction Arris Tijsseling High-Pressure Technology Darren L. Stang Materials & Fabrication Do-Jun Shim Operations, Applications & Components Yasumasa Shoji Seismic Engineering Tomoyo TaniguchiStudent Paper Competition Young W. Kwon ASME NDE Division William T. SpringerNDE Demonstration Forum Carl E. JaskeSoftware Demonstration Forum James F. Cory, Jr.

Student Paper Competition Session DevelopersCodes & Standards Koji Takahashi, Reza Adibiasl Computer Technology & Bolted Joints Yasumasa Shoji Design & Analysis Pierre Mertiny Fluid-Structure Interaction Victor Janzen, Christina Giannopapa High-Pressure Technology Mahesh AggarwalMaterials & Fabrication Noel O’Dowd, Carl E. Jaske Operations, Applications & Components Zenghu Han, Steve J. Hensel Seismic Engineering Tomoyo TaniguchiASME NDE Division William T. SpringerPVP Senate Young W. Kwon

PVP Division Executive Committee (2012 – 2013)Michael E. Nitzel ChairDaniel T. Peters Vice Chair and SecretaryDaniel T. Peters Programs ChairMarina B. Ruggles-Wrenn Communications ChairDouglas A. Scarth Honors and Awards ChairMaher Y. A. Younan Professional Development Chair

ASME Journal of Pressure Vessel Technology Editor Young W. Kwon

PVP Senate of Past Division ChairsRonald S. Hafner, Historian (2012–14) 2011–12Young W. Kwon, President (2012–14) 2010–11Luc H. Geraets, Historian 2009–10Artin A. Dermenjian 2008–09James F. Cory, Jr. 2007–08Judith A. Todd 2006–07M. K. Au-Yang 2005–06Ismail T. Kisisel 2004–05William J. Bees 2003–04Howard H. Chung 2002–03Joseph Sinnappan 2001–02A. G. (Jack) Ware 2000–01Robert F. Sammataro* 1999–00Thou-Han Liu 1998–99William E. Short, II 1997–98Richard C. Gwaltney 1996–97Shoei-Sheng Chen* 1995–96Greg L. Hollinger 1994–95Carl E. Jaske 1993–94Rudy J. Scavuzzo 1992–93Sam Y. Zamrik 1991–92G. E. Otto Widera 1990–91Robert H. Mallett 1989–90Robert W. Swindeman 1988–89Alexander H. C. Marr 1987–88Jeffrey T. Fong 1986–87Don B. Van Fossen 1985–86James R. Farr 1984–85Charles F. Nash 1983–84Donald S. Griffin 1982–83Richard H. Gallagher* 1981–82L. Eugene Hulbert 1980–81Robert E. Nickell 1979–80Roger F. Reedy 1978–79David H. C. Pai 1977–78Pedro V. Marcal 1976–77Harold H. Waite 1975–76Robert L. Cloud 1974–75Charles V. Moore 1973–74Irvin Berman* 1972–73Danos Kallas* 1971–72Robert J. Cepluch 1970–71Charles F. Larson 1969–70Gunther P. Eschenbrenner 1968–69Vito Salerno* 1967–68Dana Young* 1966–67 *Deceased

PVP Division Technical Committee ChairsCodes & Standards Kunio HasegawaComputer Technology & Bolted Joints Hakim A. BouzidDesign & Analysis Trevor G. Seipp Fluid-Structure Interaction Samir R. Ziada High-Pressure Technology Ricky D. Dixon Materials & Fabrication David L. Rudland Operations, Applications & Components Stephen J. HenselSeismic Engineering Spyros Karamanos

PVP Division Administrative Committee Chairs Membership Development Pierre MertinyPublicity & PVPD Newsletter Editor Marina B. Ruggles-WrennInternational Coordination Michiel P. H. Brongers

4

ASME President Marc W. Goldsmith 2012–2013Madiha Kotb (President Elect) 2013–2014

ASME Staff Executive Director Thomas G. LoughlinProgram Manager Melissa Torres

OPENING CEREMONY and PLENARY SESSIONThe International Scene of Pressure Vessels & Piping

The Conference opens on Monday, July 15, at 10:30 am, in the La Seine Ballroom.Representatives of the American Society of Mechanical Engineers will welcomethe attendees. The first presentation will be delivered by Ms. Anne Chaudouet,Senior Consulting Engineer at the Technical Centre for the Mechanical Industry.The second presentation will be delivered by Mr. Richard Barnes, Principal Engi-neer of ANRIC Enterprises, Inc.

Plenary Speaker

Ms. Anne ChaudouetTechnical Center for the Mechanical Industry (Cetim), Senlis, France

Fitness-For-Service—A Tool for Safer In-Service PressureEquipment While Keeping Its Economic Performance

For the sake of safety, a lot of Codes and Standards have been developed for avery long time for the construction of pressure equipment. For in-service equip-ment, Codes and Standards are not so widespread even though they are oftenneeded. After a short survey of the economic aspects at stake, the scope of fit-ness-for-service rules will be defined. The best known standards in the domainwill be presented together with the type of defects they consider. Indications willbe given on other sources that can also be used for assessing the structural in-tegrity of damaged components. From a practical point of view, the main problemsthat usually arise when performing fitness-for-service analyses will be addressedincluding the lack of information on design data and accurate operating historyon one hand and evolution of the damage on the other. In addition, assessmentmethods and data that are still needed for the assessment of present day in-ser-vice equipment will be identified. Finally the impact of the incorporation of newtechnologies in construction Codes on fitness-for-service that will be used for fu-ture in-service equipment will be briefly addressed.Ms. Anne Chaudouet is a Senior Consulting Engineer at the Technical Centre forthe Mechanical Industry (Cetim). She began her career at Cetim after earning botha Master of Pure Mathematics degree and a Mechanical Engineering Degree. Initiallyspecializing in R&D in the field of solid mechanics analysed by the boundary elementmethod (BEM), she soon became in charge of the team responsible for the develop-ment of all software developed at Cetim in the domain of 2D and 3D heat transferand solid mechanics. In that role she had the direct responsibility for the analyses ofcomponents by BEM and for fracture mechanics. In 1984, she became head of theLong Term Research Service involved in more theoretical studies and developmentof design rules for pressure vessels. In the same year she initiated Cetim's participa-tion in the Pressure Vessel Research Council.Since 2003, Ms. Chaudouet has been actively involved in ASME Boiler and Pres-sure Vessel Code organization where she is a member of numerous committeesand is Chair of the Subgroup on International Material Specifications. She is alsoan active member of the ASME/API Joint Committee on Fitness for Service.

In France, Ms. Chaudouet is a member of the Liaison Committee dealing with theEuropean Directive on Pressure Equipment (CLAP) and of the Liaison Committeedealing with the French Order on Nuclear Pressure Equipment (COLEN). She isalso a member of AFIAP, the French Association of Pressure Equipment Engineers:Ms. Chaudouet has published over 30 papers, in French and in English, in the do-main of boundary elements, fracture mechanics and more recently on fitness-for-service. She has developed professional courses on these topics and has alsogiven short courses on the European Directive (PED).

Plenary Speaker

Richard BarnesANRIC Enterprises, Inc., Toronto, ON, Canada

Is Harmonization of Codes and Standards Really Possible?One concept that is immediately obvious to people who are involved in the devel-opment of codes and standards, as well as the users of the same codes and stan-dards, is that the world would be a simpler place if we could all work to the samecode or standard. This is so self-evident that it is often with great enthusiasm thatpeople begin the activity of harmonization only to be found shipwrecked on a sub-merged island of false hope.In fact, the seas in which codes and standards are developed are filled with sub-merged islands waiting to entrap the unsuspecting person working hard towardsa better world.This talk will explore some of these entrapments and examine the question ofwhether or not it is possible to really reach the goal of full harmonization. It is justpossible, if full harmonization was achieved, that the drive to improve and moveforward could begin to grind to a halt. Maybe harmonization is not such a greatidea.Mr. Richard Barnes is the President and Principal Engineer at ANRIC EnterprisesInc. He has been actively involved for over 32 years in the development of theASME and CSA Codes & Standards.Mr. Barnes is presently Chair of the BPV III Standards Committee of the ASMEBoiler and Pressure Vessel Code; Vice Chair of the CSA N285 Technical Com-mittee; and Past Vice Chair, and current member, of the CSA N286 TechnicalCommittee on Quality Assurance. He is a member of the CSA B51 Technical Com-mittee, and President of the Canadian Boiler Society.Mr. Barnes was awarded the ASME Dedicated Service Award in 1998, and theBernard F. Langer Nuclear Codes & Standards Award in recognition for his con-tributions to the nuclear industry in 2003. In 2007, his lifetime engineering achieve-ments were recognized and honored by being elected by ASME to the Grade ofFellow. In 2009, Mr. Barnes received the CNA Outstanding Contribution Awardand the CSA Award of Merit in 2011.

HONORS and AWARDS LUNCHEONThe ASME PVP Division Honors and Awards Luncheon, during which all Divisionand selected ASME Society awards are presented, will be held on Wednesday,July 17, at 12:30 pm, in the La Seine Ballroom, on Level 0. The top PVP Divisionaward, the ASME S. Y. Zamrik PVP Medal, will be presented to Mr. William J.Bees.

5

ASME S. Y. Zamrik PVP Medal Recipient

William J. BeesConsulting Engineer, Wadsworth, OH, USA

This year’s recipient of the ASME S. Y. Zamrik Pressure Vessels & Piping Medalis Mr. William J. Bees. Mr. Bees’ distinguished career in the pressure vessel designfield spans more than 46 years. After completion of his formal education, Mr. Beeswas employed by the Babcock & Wilcox Nuclear Equipment Engineering Division,where he was involved in numerous projects related to the design, shipment, in-stallation, and upgrading of pressure vessels. Since his retirement from Babcock& Wilcox in 2006, he has provided consulting engineering services to several com-panies in the engineering, construction, and power industries. Through his careerexperience and his long-term participation on several subcommittees and sub-groups in the Codes & Standards sector of ASME, he has developed an extensiveworking knowledge of the ASME Boiler and Pressure Vessel Code. During his ca-reer, Mr. Bees has received six pressure vessel-related patents.Throughout much of his busy career, Mr. Bees also found time to be active in en-gineering professional societies with memberships in both the ASME and theAmerican Society of Civil Engineers— ultimately being named a Fellow Memberby each society. An abbreviated sample of his contributions to the ASME and thePVP Division (PVPD) include service in several positions on the Design and Analy-sis Technical Committee, several positions on the PVPD Executive Committeeculminating as Chair of the PVPD, PVPD Senate Historian, PVPD Senate Presi-dent, ASME Pressure Technology Group Leader, member and trainer for theASME Council on Engineering, and member of several subcommittees and sub-groups within the ASME Council on Codes & Standards. Known throughout thePVPD as “Bill” or “Bees,” he remains a recognized leader and constant contributorto the PVPD’s success.

WORKSHOPS and TUTORIALSTutorials and Workshops offer both the experienced and early career engineersexcellent opportunities to refresh their knowledge and to venture into specific tech-nical areas outside their expertise.Special Tutorial: This is a two-hour conference session, usually held on Sundayafternoon; however, for 2013, a second special tutorial is scheduled on Mondaymorning. The session leader will make available the necessary presentation ma-terial.Technical Tutorials: These tutorials are approximately four hours in length. Tech-nical tutorials fill two consecutive conference session blocks, and are integratedinto the conference session schedule. Admission to the tutorials and workshopsis free for Conference Registrants. At each technical tutorial, attendees may pur-chase a copy of the Tutorial Notes; the charge is set as low as possible based onthe cost of production. For 2013, the notes for the Technical Tutorials may be pur-chased for €30.00 each at the individual tutorial sessions. The Technical Tutorialnotes will be available in either printed or electronic format.

Each attendee will receive a Certificate of Attendance, as proof that the attendeehas participated in the two-hour Special Tutorial, or the four-hour Technical Tuto-rial.PVP Division will not assign Continuing Education Units (CEUs) on these certifi-cates. However, attendees may negotiate CEU credits with their respective licens-ing boards.An outline of the tutorial sessions for the 2013 PVP Conference is presentedbelow.

WORKSHOPS TECHNICAL WORKSHOPSunday, July 14, 9:00 am – 11:30 amLes Invalides A+B, Level 2Microwave NDE Techniques for Rubber Expansion Joints and HDPE ButtFusions in Power Plantsby Bob Stakenborghs, Evisive, Inc.Sponsored by Evisive, Inc.This workshop will provide an overview on the theory and operation of microwaveNDE for rubber expansion joints and HDPE pipe butt fusions. This NDE techniqueis currently in use on these materials in industries worldwide. The workshop willinclude equipment demonstrations for both applications.TECHNICAL WORKSHOPSunday, July 14, 1:00 pm – 3:30 pmLes Invalides A+B, Level 2NDT Workshopby John Thompson and Mike Farley, ICNDT; Ralf Holstein, DGZfP;Cameron Sinclair, BINDT; Alexander Mullin, RTC; Mike Turnbow, ASME;and Joe Brzuszkiewicz, ICNDT Sponsored by Ithe International Committee on NDT (ICNDT) and the Euro-pean Federation for NDT (EFNDT)This workshop is intended to give an overview of international developments inthe field of qualification and certification of NDT personnel. On the basis of thenew standard, ISO 9712:2012, it is now possible to develop a multilateral recog-nition agreement on a worldwide level. The International Committee for NDT(ICNDT) already started this work and published the ICNDT MRA. This is a veryimportant first step to overcome the national restriction in the Qualification andCertification of NDT Personnel. The program will be delivered by speakers whoare experts in their field.SPECIAL TUTORIALSSunday, July 14, 4:00 pm – 6:00 pmLes Invalides A+B, Level 2Perspectives on Engineering Career Path Development—What It Takesand Where It Leadsby Ike Ezekoye, Westinghouse; Charles Becht, Becht Engineering Com-pany, Inc.; Luc H. Geraets, GDF Suez Nuclear; Takayasu Tahara, T&T Tech-nology; and Ayman Cheta, Shell USA This special tutorial will be a panel session that covers the paths various organi-zations and companies take to develop engineers for leadership positions. Fivepanelists drawn from different countries will share their perspectives and experi-ences with the audience. Over the course of a typical working life, engineers willhold positions that range from early career engineering positions to technical ex-perts, managers, business leaders, and entrepreneurs. This tutorial describes de-velopment paths that engineers might take in their professional life and the skillsthat can be developed to advance one’s career. The tutorial is geared to early ca-reer and mid-career engineers. Equally, seasoned engineers may find the opendiscussions beneficial for themselves and also in mentoring other engineers.Monday, July 15, 8:30 am – 10:15 amLes Invalides A+B, Level 2Process and Benefits of ASME Pressure Technology Codes & StandardsDevelopmentby William J. Bees, Consulting Engineer, and Mahendra Rana, Praxair, Inc.

Coffee Breaks and RefreshmentsCoffee and refreshments are available throughout the week in the

Foyer La Seine (Level 0).This hub of activity features the forums, coffee breaks, guest activ-

ity information area, and registration.

6

Have you ever wondered how all of the Codes & Standards stuff that ASME produceshappens? In addition to the advantages and benefits that ASME members gain frommembership in the PVP Division and attendance and participation in the ASME Pres-sure Vessel and Piping Conference, ASME can also offer additional benefits to folkswith these interests in the area of Codes & Standards development. In this specialtutorial, we will: • Explain the overall process used in development of ASME Codes & Stan-

dards, and specifically those in the area of Pressure Technology Codes &Standards;

• Describe the consensus process used in the Codes & Standards develop-ment process and the ANSI approval process;

• Explore the benefits to participants in ASME Codes & Standards develop-ment activities;

• Discuss the various types of participation in the Codes & Standards Com-mittees, qualifications, and the expectations of the participants;

• Explore the relationship between ASME Pressure Vessels & Piping Divisionand ASME Codes & Standards;

• Explain the overall structure of the Committee Structure under the Board onPressure Technology Codes & Standards and their areas of responsibilities;and

• Discuss some of the emerging areas in Pressure Technology and the onescurrently seeking participants.

One of ASME’s most valuable assets is our relationships with the volunteer mem-bers who serve on our Codes & Standards committees. It is ASME’s policy to af-ford all persons with direct and material interest, without regard to country ofcitizenship or residency, the opportunity to participate in the ASME Codes & Stan-dards development process. Membership on a committee normally representsyou as an individual, rather than as a representative of your employer or anotherorganization.The last part of the session will be an open question and answer session to dis-cuss any questions you may have. So come and ask the experts about anotherway to get involved with ASME.

TECHNICAL TUTORIALSMonday, July 15, 2:00 pm – 5:45 pmLes Invalides A+B, Level 2Application of Fitness-for-Service Codes to Nuclear Installationsby Bostjan Bezensek, Shell UK Ltd; Claude Faidy, EDF-SEPTEN; PeterBudden, EDF Energy; and Russell Cipolla, Intertek-APTECH

The evaluation of the fitness for service of structural components is a key aspectfor developing safety justifications for continued operation in many industries con-cerned with pressurized piping and vessels, and in particular for safety in nuclearpower plants.This tutorial will provide the structural integrity engineer with an understandingbehind the fundamental concepts and give practical guidance on the applicationof the three common fitness-for-service Codes and procedures: RSE-M, R6 andASME Boiler and Pressure Vessel Code Section XI for fitness-for-service evalu-ations of the nuclear installations. The tutorial will begin with the overview of eachCode or procedure, including: • Content of each Code/procedure and alignment with the relevant construc-

tion/pre-service Codes; • Technical steps adopted in each Code/procedure for performing the evalu-

ation (e.g., acceptance standards/assessments); • Determination of the key solution parameters (e.g., stress intensity factors,

J-integral and the limit load solutions); • Options for performing the assessment; • Sensitivity studies & Alternative approaches; • On-going technical challenges and developments (e.g., weld residual stress

profiles.Each Code/procedure will be illustrated on a set of industrial examples, such asflaws in a dissimilar metal weld to provide practical guidance on performing theassessment.Tuesday, July 16, 2:00 pm – 5:45 pmLes Invalides A+B, Level 2

Bolted Joint Design, Analysis, and Code ComplianceSayed Nassar, Oakland University, and Warren Brown, Integrity Engineer-ing Solutions Pty. Ltd.

This tutorial provides the design engineer with the necessary background for thedesign, analysis, assembly, and ASME Code compliance of bolted joint systems.The first half of the tutorial reviews and examines the basic principles of boltedjoint systems used in structural, mechanical, or pressure boundary applications.This part will emphasize a systems approach to the design, analysis, and assem-bly of bolted joint systems. Topics include torque-tension relationship, role of fric-tion, tightening strategies including, torque-only control, torque-turn,torque-to-yield, and other direct control methods. The design principles examinedwill include joint loading during assembly (including selection of bolt preload andelastic interaction) and subsequent joint behavior under service loads (fatigue, vi-bration loosening, and corrosion). The second half of the tutorial will examine howpressure boundary bolted joints are addressed in ASME codes. The purpose andbackground of each of the different standards will be examined. Some comparisonwith other methods, such as CEN, will be given.The material presented will cover design aspects of the code, focusing on post-construction operation. Particular emphasis will be placed on the new guidanceand calculations provided in ASME PCC-1-2010 and the upcoming changes inASME PCC-1-2013. The focus of the second half of the tutorial will be on practicalapplication, with examples, of the methods available within ASME for addressingnew designs and problematic pressure boundary bolted joints.Wednesday, July 17, 8:30 am – 12:15 pmLes Invalides A+B, Level 2Computational Weld Modelingby Frederick W. Brust, Engineering Mechanics Corporation of Columbus;David L. Rudland, USNRC; Michael R. Hill, University of California, Davis;and Roger Dennis, Frazer-Nash

This tutorial will provide an overview with examples of the methods used to com-putationally model the weld process and experimentally measure the residualstress. The engineering analysts will learn simple fundamentals on how to calcu-late weld residual stresses (WRS) and weld distortions and include them in lifeassessments and techniques that can be used to manage weld distortions. Projectmanagers can learn how control of WRS can greatly reduce fabrication costs andimprove service performance, leading to fewer service problems. Because WRSmodeling is complicated, the trainee will not be a specialist after taking the course,but will understand the importance of the issues that can be managed throughWRS modeling and will permit him or her to know how and where to get moretraining if desired.

PVP CONFERENCE ORGANIZER TRAININGTuesday, July 16, 8:30 am – 10:15 am Les Invalides A+B, Level 2Things You Should Know—Technical Program Representatives and Ses-sion Developersby M. E. Nitzel and D. T. Peters, PVP Division Executive Committee

All current or prospective Technical Program Representatives, Topic Organizers,and Session Developers are encouraged to attend this training. The session willfocus on the duties and responsibilities of the Conference organizers and the“things you should know” to be an efficient member of the PVP Conference or-ganizing team. Numerous examples will be offered, and a question and answerperiod will be an integral part of this training.

NDE and SOFTWARE FORUMSNDE Demonstration Forum Monday, July 15, 8:00 am – 5:45 pm Foyer La Seine, Level 0The NDE Demonstration Forum will be held on Monday, July 15. NDE Vendorswill present and discuss their capabilities, equipment, and services in the FoyerLa Seine, Level 0. For additional information, please contact Dr. Carl E. Jaske,Det Norske Veritas (USA), Inc., at Carl.Jaske@dnv.com.

7

Software Demonstration Forum Tuesday, July 16, 8:00 am – 5:45 pm Foyer La Seine, Level 0The Software Demonstration Forum will be held on Tuesday, July 16. SoftwareVendors will present and discuss their capabilities, equipment, and services in theFoyer La Seine, Level 0. For additional Information, please contact James F. Cory,Jr., Siemens PLMS Software, at james.cory@siemens.com.

SOCIAL PROGRAMS and TOURSConference-Wide Reception—La Seine BallroomMonday, July 15, 6:15 pm – 8:00 pm All who registered are invited to attend the Reception. Meet with your colleagues,many of whom you may not have seen for a while. Join with the registrants andguests for a relaxing evening.

No charge for registered conference participants and guests Paris City TourMonday, July 15, 9:00 am – 3:00 pm Driving by all the famous spots of Paris,you will get into the heart of the secrets ofthe city: The Sun King, the French revolu-tion, Napoleon Bonaparte, many importantpeople, and famous events have madeParis the beautiful city it is now.During the tour, two stops will be arrangedfor taking pictures and stretching legs: theTrocadéro facing the Eiffel Tower andNotre-Dame where a coffee break will beoffered. Among Parisian famous spots, youwill also discover the bustling OperaSquare, the spectacular Concorde Squarewith its famous obelisk, the Invalides, andthe Champs Elysee with the famous Arc de Triomphe.

Tickets: €50 per Person

Orsay MuseumTuesday, July 16, 10:00 am – 2:00 pm The Gare d'Orsay was inaugurated on the 14th of July, 1900 for the Paris WorldExposition and was considered a masterpiece of industrial architecture. But soonthe platforms had become too short for the now much longer trains and, as earlyas 1939, the Gare d'Orsay was out of use as a train station.The train station had been completely abandoned since 1961 when it was savedfrom demolition by French President Pompidou. In 1978, French President Gis-card d'Estaing decided to use the gare inside the museum d'Orsay as a museumfor 19th and 20th century art.In November 1986, the museum was inaugurated by French President, FrançoisMitterrand.The museum contains 2,300 paintings, 1,500 sculptures and 1,000 other objects.

It covers a period from mid-19th century till mid-20th centuries, and contains worksfrom Monet, Manet, Renoir, Cezanne, Van Gogh, and others.Admission to the museum and a light lunch are included in the price for this tour.

Tickets: €75 per PersonCONFERENCE INFORMATION

Technical Sessions and ProgramsAll technical sessions will be held on Levels -1, 0, 2, and 3 of the Hotel. Eachroom will be equipped with an LCD projector that can be connected to a personalcomputer for electronic presentations (e.g., Microsoft PowerPoint). Please notethat ASME will not provide personal computers, 35-mm slide projectors, VCRs,or overhead projectors. Personal computers are the responsibility of the sessiondeveloper, or presenter. It is strongly recommended that authors provide their ma-terials to the session developer at, or before, the Authors’ Breakfast, so that allthe papers in a session can be loaded onto a single computer. Authors are rec-ommended to have their presentations on a flash (pen) drive, in the event thatcompatibility problems occur between their computers and the LCD.The location of the session rooms is shown in the Hotel Floor Plans located in thebac of this program.Rudy Scavuzzo Student Paper Symposium and 21st Annual Student PaperCompetitionMon., July 16, 8:30 am – 10:15 am & 2:00 pm – 5:45 pm Tues., July 17, 8:30 am – 12:15 pm & 2:00 pm – 5:45 pm Ella Fitzgerald-A Room, Level 1The 2013 Rudy Scavuzzo Student Paper Symposium & 21st Annual StudentPaper Competition is sponsored by the PVPD Senate. Young W. Kwon, PVPDSenate President, and Ronald S. Hafner, PVPD Senate Vice-President and His-torian, will conduct the sessions, together with the Student Symposium and Com-petition representatives from each PVP Technical Committee. The Senate ReviewCommittee will identify the outstanding finalist undergraduate and graduate stu-dent papers in two categories: the BS/MS level and the Ph.D. level. Finalist paperswill be judged on written technical content (70%) and presentation effectiveness(30%). A $1,000 award will be made to each of the presenting Student CompetitionFinalist authors during the Honors Luncheon. In addition, in each category (i.e.,BS/MS and Ph.D.), $1,000 will be awarded to the presenting author of the Out-standing Student Paper; $800 will be awarded to the presenting author of the FirstRunner-Up Student Paper, and $500 will be awarded to the presenting author ofthe Second Runner-Up Student Paper. Students must attend the Conference, andmust present their papers to be eligible for an award. The winners will be an-nounced at the Honors and Awards Luncheon, on Wednesday, July 17.Technical Committee Meetings Monday & Tuesday, July 15 & 16, 12:15 pm – 1:45 pm The Pressure Vessels & Piping Division Technical Committees will meet duringthe noon break on Monday, July 15, and Tuesday, July 16. Visitors are encouragedto attend and take an active part in PVP committee activities. All committee meet-ings, schedules, and rooms are listed on Page 9.Honors and Awards LuncheonWednesday, July 17, 12:30 pm – 2:15 pm La Seine Ballroom, Level 0 The Honors and Awards Luncheon, honoring all Division Award Recipients andthe 2013 ASME S. Y. Zamrik PVP Medalist, Mr. William J. Bees, will be held onWednesday, July 17, from 12:30 pm, until approximately 2:15 pm, in the La SeineBallroom, Level 0. One ticket is included in the Full Conference registration fee.Additional tickets may be purchased at the Conference Registration desk.

Badge Required for all EventsPlease wear your badge for admission to all Conference activities.

Your badge also provides a helpful introduction to other Confer-ence attendees.

8

Authors Breakfast/Briefing Monday – Thursday, July 15 – 18, 7:30 am – 8:15 am La Seine Ballroom, Level 0Authors, Panelists, Session Developers, Chairs, and Vice-Chairs are requestedto attend a breakfast briefing in the La Seine Ballroom, Level 0, on Mondaythrough Thursday, at 7:30 am, on the morning of their sessions. Session protocolwill be discussed, and the participants will have the opportunity to become betteracquainted with one another before their scheduled sessions. Authors are en-couraged to place all the presentations for their session on a single computer atthe Authors’ Breakfast.Registration Hours Foyer La Seine, Level 0Located in the Foyer La Seine, Level 0, the ASME registration desk will be openduring the following hours, to provide advance registrants with their materials, toprocess on site registrations, and to provide additional Conference information:

Sunday, July 14 8:00 am – 6:00 pmMonday, July 15 7:30 am – 4:00 pmTuesday, July 16 7:30 am – 4:00 pmWednesday, July 17 7:30 am – NoonThursday, July 18 7:30 am – 3:00 pm

On-Site Registration Fees For those not registered in advance, the On-Site Registration Fees are as follows:

Full Registration* One Day Registration**ASME Member €600 €450Author/Panelist €600 €450Session Chair €600 €450Session Vice Chair €600 €450Coop. Soc. Member*** €600 €450Non-Member €650 €500ASME Life Member† €150 ——Student Author‡ €200 ——Student Non-Member (Non-Author)‡‡ €150 ——Guest/Spouse N/C N/C* Full Registration fees include a Conference CD and one (1) ticket for the Hon-

ors Luncheon.** One Day Registration fees include a Conference CD and admission to tech-

nical sessions for one-day.*** To qualify for discounted registration fees, you must be a member of ASME,

or one of the cooperating societies listed below. Please fill in your society af-filiation and membership number on the registration form.

† Registration under this category includes access to every technical session,admission to the Plenary Session and Conference-Wide Reception, a Con-ference CD, and one (1) ticket for the Honors Luncheon.

‡ Student Author Full Registration Fees include a Conference CD and one (1)ticket for the Honors Luncheon.

‡‡ Student Non-Author Full Registration Fees include a CD-ROM of the Con-ference Proceedings, only.

Cooperating SocietiesIf you are a member of a Cooperating Society, you may register at the ASMEmember rate.Conference Publications Foyer La Seine, Level 0Papers presented at the ASME PVP 2013 Conference are published on a CDavailable at the Conference. Information on paper titles and authors are includedin the final program. All attendees registered for the entire Conference (i.e., FullRegistration) will receive a coupon redeemable for one CD containing all the tech-nical papers presented in the Conference.

Bound volumes of Conference Proceedings may be ordered at the Conference, forpost-conference shipping, subject to there being sufficient demand for the respectivevolumes. A list of volumes is available in the Conference publication room, whichfeatures a variety of ASME publications.Ship Your Conference Proceedings You can ship your ASME Publications to your home or office right from the Con-ference. Bring your books to the shipping booth in the Publication Sales room,and they will be packaged and shipped for you. Inquire at the Publication Salesroom for location and fees.Disabled Registrants Whenever possible, arrangements can be made for disabled registrants, if advancenotice is given. Please indicate any special needs on the registration form, or contactMelissa Torres at TorresM@asme.org with your request.Tax Deductibility Expenses of attending professional meetings have been held to be tax deductibleas ordinary business expenses for U.S. citizens. Please verify the tax regulationsin your country to determine whether Conference expenses are deductible.Guest/Family Programs Guests and family members of registrants are welcome at the Guest Programsthat include A Paris City Tour (Monday), the Conference-Wide Reception at theMarriott Rive Gauche Hotel (Monday evening), and the Orsay Museum tour (Tues-day). Badges are required for admission to all events.A guest program activities packet is also included. Please indicate how manyguests you will be bringing on your registration form, so that the necessary ac-commodations can be arranged.Please also note that the tours have an associated fee for participants, as is shownon the registration form, and in this booklet. Early registration is strongly recom-mended for the events that require fees, as they are available only on a first-come,first-served basis.Professional Development Hours Now AvailableProfessional Development Hours are available for your attendance at the PVPConference. Simply stop by the registration desk and fill out a certificate requestform with the sessions that you have attended. The certificates can then bepicked up on Thursday at the registration desk.Publishing Conference Papers in the ASME Journal of Pressure VesselsTechnology Technical papers presented at the ASME PVP 2013 Conference are published inthe form of the ASME Conference Proceedings on a CD. Publication of papers inthese proceedings does not preclude authors from publishing their papers inASME archival journals, such as the ASME Journal of Pressure Vessel Technology(i.e., the Journal), which is the technical voice of the Pressure Vessels & PipingDivision.Authors are encouraged to submit their papers to the Journal. The Journal is ed-ited by Dr. Young W. Kwon, and manuscripts should be submitted to the addressbelow. Manuscripts should be prepared according to the Journal guidelines, whichcan be found at the ASME web site at:http://journaltool.asme.org/Content/index.cfm.

Dr. Young W. Kwon, Editor Journal of Pressure Vessel Technology Dept. of Mechanical & Astronautical Engineering 700 Dyer RoadNaval Postgraduate SchoolMonterey, CA 93943Ph/Fax: 831-656-3468 / 2238E-mail: ywkwon@nps.edu

9

PVP 2013 COMMITTEE MEETINGSDate/Time Meeting Room Responsible Person Sunday, July 14, 20138:30 am – 12:30 pm PVPD Executive Committee La Senat M. E. Nitzel 1:30 pm – 2:30 pm PVP Senate La Senat Y. W. Kwon Monday, July 15, 201312:15 pm – 1:45 pm PVPD Codes and Standards Technical Committee Les Invalides A+B K. Hasegawa12:15 pm – 1:45 pm PVPD Fluid-Structure Interaction Technical Committee La Senat S. R. Ziada12:15 pm – 1:45 pm PVPD Operations, Applications and Components Technical Committee La Sorbonne A+B S. J. Hensel 12:15 pm – 1:45 pm PVPD Design and Analysis Technical Committee La Sorbonne C+D T. G. Seipp 2:00 pm – 3:15 pm PVPD International Coordination Committee La Senat M. P. H. Brongers Tuesday, July 16, 20138:30 am – 10:15 am PVPD Professional Development La Senat M. Y. A. Younan 8:30 am – 12:15 pm Subgroup High Pressure Vessels Committee (BPV VIII) La Sorbonne A+B D. T. Peters, A. Maslowski 10:30 am – 12:15 pm PVPD Communications Committee La Senat M. B. Ruggles-Wrenn 12:15 pm – 1:45 pm PVPD Materials and Fabrication Technical Committee Les Invalides A+B D. L. Rudland 12:15 pm – 1:45 pm PVPD Seismic Engineering Technical Committee La Senat S. Karamanos 12:15 pm – 1:45 pm PVPD High Pressure Technology Technical Committee La Sorbonne A+B R. D. Dixon12:15 pm – 1:45 pm PVPD Computer Technology & Bolted Joints Technical Committee La Sorbonne C+D H. A. Bouzid 2:00 pm – 3:45 pm PVPD Honors and Awards Committee La Senat D. A. Scarth 2:00 pm – 3:45 pm PVP2014/2015 Program Committee La Sorbonne C+D D. T. Peters 2:00 pm – 5:45 pm Subgroup High Pressure Vessels Committee (BPV VIII) La Sorbonne A+B D. T. Peters, A. Maslowski Wednesday, July 17, 201310:30 am – 12:15 pm JPVT Editors La Senat Y. W. Kwon 2:00 pm – 5:45 pm Taskgroup Impulsively Loaded Vessels (BPV VIII) La Sorbonne A+B A. Clayton, A. Maslowski Thursday, July 18, 20138:30 am – 12:15 pm PVPD Executive Committee La Senat M. E. Nitzel 12:30 pm – 3:45 pm PVPD General Committee La Seine BR M. E. Nitzel4:00 pm – 5:45 pm PVPD Conference Evaluation La Seine BR P. Mertiny

PUBLICATIONSPapers presented at the 2013 PVP Conference will be published in bound volumes, to be purchased at the Conference for post-conference shipping, subject to sufficientdemand from the authors. The list of volumes is presented below. Other books of interest, Codes & Standards, Transactions, Journals and free literature regardingASME publications will be available at the Conference.During the Conference, all publications will be sold at the ASME member price. Prepaid orders will be taken for publications that are not available at the Conference.All fully-paid Conference registrants will receive a Conference CD-ROM containing the papers presented at PVP2013. A complete set of the volumes covering the 2013PVP Conference publications may be purchased as a package at a 10% discount. All publications sales taking place at the Conference will be in Euros (€). ASMEaccepts payment in cash (€), checks (€), travelers’ checks (€), VISA, MasterCard, American Express, Diners Club, and Discover. Technical papers and bound volumesmay be ordered after the Conference by contacting the ASME Order Department, 22 Law Drive, P.O. Box 2300, Fairfield, NJ 07007-2300, or by calling 1-800-THE-ASME. Payment by check or credit card (VISA, MasterCard, American Express, Diners Club, and Discover) must accompany your order. California, Georgia, Illinois,and Texas purchasers must add the appropriate sales tax or furnish a tax exemption certificate. A Value Added Tax (VAT) of approximately 19% will be added to anybooks purchased at the Conference. Checks from non-US banks are not accepted.You may also ship your Conference publications home, or to your office, right from the Publication Sales. A shipping booth will be set up for your convenience, so youdo not have to carry your books home.The Publication Sales area, located in the Foyer La Seine, Level 0, near the Registration Desk, will be open during the following hours:

Sunday, July 14 3:00 pm – 6:00 pmMonday, July 15 8:00 am – 4:00 pmTuesday, July 16 8:00 am – 4:00 pmWednesday, July 17 8:00 am – NoonThursday, July 18 8:00 am – 3:00 pm

10

PVP 2014

AnaheimHyatt Regency Orange County

July 20–24, 2014

ASME Pressure Vessels & Piping ConferenceInnovation and Imagination in Pressure Vessels & Piping

Join us in beautiful Anaheim, California, for the 2014 ASME Pressure Vessels & Piping Conference! PVP Conferences are known to be the outstanding internationaltechnical forum for participants to further their knowledge-base through exposure to diverse engineering topics and dissemination of cutting-edge technology. Opportunitiesabound to exchange opinions and ideas, both from industry and academia, in the many topical areas related to Pressure Vessel and Piping technologies for the Powerand Process Industries. Participants from approximately 40 countries in Europe, Africa, the Middle East, Asia, the Americas, and the Oceania islands assure an interestingmixture of topics, ideas, and viewpoints.The ASME Pressure Vessels & Piping Division is the primary sponsor of the PVP-2014 Conference, with additional participation by the ASME Nondestructive Examination(NDE) Division. More than 190 paper and panel sessions are planned, as well as workshops, tutorials, NDE and Software Demonstration Forums, and our traditionalStudent Paper Competition and Symposium.GENERAL TOPICS: (1) Codes & Standards; (2) Computer Technology & Bolted Joints; (3) Design & Analysis; (4) Fluid-Structure Interaction; (5) High Pressure Tech-nology; (6) Materials & Fabrication; (7) Operations, Applications & Components; (8) Seismic Engineering; (9) Non-Destructive Examination; and (10) our Student PaperCompetition and Symposium.SCHEDULE: Abstracts are due by November 11, 2013. Authors will be notified of abstract acceptance by December 2, 2013. Draft papers are due by February 10,2014. Paper peer review comments will be returned by March 10, 2014. A Copyright Agreement Form for each paper, and the final manuscripts in the standard ASMEformat for publication, must be received by April 7, 2014. All presented technical papers will be published as referencable documents available post-conference viahardcopy or electronic media.INFORMATION: The conference website URL is: http://www.asmeconferences.org/PVP2014/. Technical paper abstracts must be submitted electronically through thewebsite. Visit the website for additional information.

PVP Conference Chair PVP Technical Program ChairDaniel T. Peters Marina B. Ruggles-Wrenn

Structural Integrity Associates, Inc. Air Force Institute of Technology16339 Irish Road AFIT/ENY

Edinboro, PA 16412, USA 2950 Hobson WayPhone/Fax: 814-440-8173/330-899-9753 WPAFB, OH 45433-7765, USA

E-mail: asmepeters@gmail.com Phone: 937-255-3636x4641Email: ruggles-wrennm1@asme.org

Sponsorship ChairCarl E. Jaske

Det Norske Veritas (USA), Inc.5777 Frantz Road

Dublin, OH 43017-1386, USAPhone: 614-761-6916/Fax: 614-761-1633

E-mail: Carl.Jaske@dnv.com

11

1.3B (SPC-1-1) STUDENT PAPER COMPETITION I—BS/MS LEVEL1.3C (CS-3-1) ENVIRONMENTAL FATIGUE ISSUES-I1.3D (FSI-1-2) FLUID FLOW AND HEAT TRANSFER—II1.3E (MF-4-2) ROUND ROBIN ACTIVITIES IN RESIDUAL STRESS DETER-

MINATION1.3F (DA-9-2) EQUIPMENT DYNAMICS1.3G (DA-1-2) DESIGN AND ANALYSIS OF PRESSURE VESSELS AND

COMPONENTS II1.3H (HT-5-1) DESIGN AND ANALYSIS OF HIGH PRESSURE COMPRES-

SORS AND THEIR CYLINDER VALVES1.3I (DA-14-2) FRACTURE 21.3J (SE-2-2) STRUCTURAL DYNAMICS—LINEAR AND NONLINEAR1.3K (OAC-8-2) PLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENT II1.3L (CT-2-1) DESIGN AND ANALYSIS OF PRESSURE SEALED JOINTS1.3M (CS-9-1) ASME CODE SECTION XI ACTIVITIES1.3N (FSI-2-2) PIPING VIBRATIONS AND ACOUSTICS I1.3O (MF-18-2) IMPACT OF MICROSTRUCTURE ON FRACTURE1.3Q (TW-1-7) APPLICATION OF FITNESS-FOR-SERVICE CODES TO NU-

CLEAR INSTALLATIONS—PART I1.3S (MF-29-3) NDE DEMONSTRATION FORUM—IIIBlock 1.4: Monday, July 15, 2013 (4:00 pm – 5:45 pm)1.4A (DA-6-1) COMPOSITE MATERIALS AND STRUCTURES1.4B (SPC-1-2) STUDENT PAPER COMPETITION II—BS/MS LEVEL1.4C (CS-3-2) ENVIRONMENTAL FATIGUE ISSUES-II1.4D (FSI-1-3) FLUID TRANSIENTS1.4E (MF-4-3) RESIDUAL STRESS MEASUREMENTS USING MATURE

TECHNIQUES1.4F (CS-7-1) PANEL SESSION: RECENT DEVELOPMENTS IN ASME

CODES AND STANDARDS1.4G (CS-12-1) RECENT EUROPEAN CODES AND STANDARDS1.4H (HT-5-2) HIGH PRESSURE COMPRESSOR PLUNGERS AND AUTO-

CLAVE REACTOR CONNECTIONS1.4I (DA-14-3) FRACTURE 31.4J (SE-4-1) SEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS #11.4K (OAC-8-3) PLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENT

III1.4L (CT-4-1) ASSEMBLY AND TIGHTENING OF BOLTED JOINTS1.4M (CS-14-1) REPAIR, REPLACEMENT AND MITIGATION FOR FITNESS-

FOR-SERVICE RULES1.4N (FSI-2-3) VORTEX-INDUCED VIBRATIONS AND WAKE DYNAMICS I1.4O (MF-18-3) IMPACT OF MICROSTRUCTURE ON TIME DEPENDENT

DEGRADATION1.4Q (TW-1-7) APPLICATION OF FITNESS-FOR-SERVICE CODES TO NU-

CLEAR INSTALLATIONS—PART II1.4S (MF-29-4) NDE DEMONSTRATION FORUM—IV

Tuesday, July 16, 2013

Block 2.1: Tuesday, July 16, 2013 (8:30 am – 10: 15 am)2.1A (MF-16-1) PLASTIC PIPE—SESSION 12.1B (SPC-1-3) STUDENT PAPER COMPETITION III—PHD LEVEL2.1C (CS-3-3) ENVIRONMENTAL FATIGUE ISSUES-III2.1D (FSI-1-4) FLUID TRANSIENTS AND STRUCTURAL ANALYSIS2.1E (MF-4-4) RESIDUAL STRESS MEASUREMENTS: IN-PROGRESS

TECHNIQUES2.1F (CS-7-2) PANEL SESSION: THE INTERNATIONAL COOPERATION ON

THE HARMONIZATION OF MECHANICAL DESIGN CODES2.1G (DA-2-1) DESIGN & ANALYSIS OF PIPING & PIPING COMPONENTS I2.1H (NDE-1-1) NDE TESTING METHODS AND REQUIREMENTS

SESSION TITLES BY SESSION BLOCKSessions are arranged in Session Blocks in the format X.YZ, where: X indicates the Day, Y indicates the Session Block, and Z indicates the Conference Session Room.Conference Session Rooms are as follows: A = Ella Fitzgerald B; B = Ella Fitzgerald A; BLRM = La Seine Ballroom; C = Miles Davis C; D = Miles Davis B; E = MilesDavis A; F = Louis Armstrong A+B; G = Louis Armstrong C+D; H = Pont De Sully A+B; I = Pont Des Arts A; J = Pont Des Arts B; K = Pont Des Arts C; L = St. Michel; M= St. Germain Des Pres A+B; N = Le Parc Montsouris A; O = Le Parc Montsouris B; P = Not Used; Q = Les Invalides A+B; R = Not Used; S = Foyer La Seine; T = NotUsed. The parenthetical designations are the Technical Committee session references.

The Technical Committee acronyms used are shown below: • CS = Codes & Standards • CT = Computer Technology & Bolted Joints • DA = Design & Analysis • FSI = Fluid–Structure Interaction • HT = High Pressure Technology • MF = Materials & Fabrication • NDE = ASME Nondestructive Evaluation Division • OAC = Operations, Applications, and Components • SE = Seismic Engineering • SPC = Rudy Scavuzzo Student Paper Symposium & Student Paper

Competition • TW = Technical Tutorials and Workshops

All sessions are sponsored by the indicated Technical Committee unlessspecifically noted in the daily listing of individual sessions beginning onpage 14.

Sunday, July 14, 2013

Block 0.1: Sunday July 14, 2013 (9:00 am – 11:30 am)0.1Q (TW-1-2) MICROWAVE NDE TECHNIQUES FOR RUBBER EXPANSION

JOINTS AND HDPE BUTT FUSIONS IN POWER PLANTSBlock 0.2: Sunday July 14, 2013 (1:00 pm – 3:30 pm)0.2Q (TW-1-4) NDT WORKSHOPBlock 0.3: Sunday July 14, 2013 (4:00 p.m. – 6:00 p.m.)0.3Q (TW-1-5) PERSPECTIVES ON ENGINEERING CAREER PATH DEVEL-

OPMENT—WHAT IT TAKES AND WHERE IT LEADS

Monday, July 15, 2013

Block 1.1: Monday, July 15, 2013 (8:30 am – 10:15 pm)1.1B (SPC-1-5) STUDENT PAPER SYMPOSIUM I1.1C (CS-2-1) RATCHETING AND FATIGUE ISSUES IN PRESSURE VES-

SEL AND PIPING DESIGN—I1.1D (FSI-1-1) FLUID FLOW AND HEAT TRANSFER—I1.1E (MF-4-1) METALLURGICAL MODELS FOR WELDING SIMULATION1.1F (DA-9-1) PIPING DYNAMICS1.1G (DA-1-1) DESIGN AND ANALYSIS OF PRESSURE VESSELS AND

COMPONENTS I1.1H (HT-1-1) DESIGN, ANALYSIS, FABRICATION, OPERATION AND MAIN-

TENANCE OF HIGH-PRESSURE EQUIPMENT1.1I (DA-14-1) FRACTURE 11.1J (SE-2-1) STRUCTURAL DYNAMICS—LINEAR AND NONLINEAR1.1K (OAC-8-1) PLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENT I1.1L (CT-1-1) DESIGN AND ANALYSIS OF BOLTED FLANGE JOINTS1.1N (FSI-2-1) VIBRATIONS OF PLANT COMPONENTS: SPECIAL SESSION

IN MEMORY OF JOHN FITZPATRICK1.1O (MF-18-1) SIMULATION OF CRACK GROWTH AND FRACTURE1.1Q (TW-1-6) BENEFITS OF ASME CODES AND STANDARDS1.1S (MF-29-1) NDE DEMONSTRATION FORUM—IBlock 1.2: Monday, July 15, 2013 (10:30 am – 12:15 pm)1.2BLRM (TW-1-1) OPENING CEREMONY AND PLENARY LECTURES1.2S (MF-29-2) NDE DEMONSTRATION FORUM—IIBlock 1.3: Monday, July 15, 2013 (2:00 pm – 3:45 pm)1.3A (CS-18-1) PLASTIC PIPE APPLICATIONS AND DEVELOPMENTS IN

CODES AND STANDARDS

12

2.1I (DA-13-1) CFD IN DESIGN & ANALYSIS 12.1J (SE-4-2) SEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS #22.1K (OAC-1-1) SAFETY, RELIABILITY AND RISK ASSESSMENT FOR NU-

CLEAR POWER APPLICATIONS2.1L (CT-5-1) THREADED FASTENERS I2.1M (CS-17-1) COMBINATION OF MULTIPLE LOADS IN DESIGN AND FIT-

NESS-FOR-SERVICE2.1N (FSI-2-4) AXIAL AND LEAKAGE-FLOW-INDUCED VIBRATION I2.1O (MF-5-1) EUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY—I2.1Q (TW-1-10) PVP CONFERENCE ORGANIZER TRAINING2.1S (CT-15-1) SOFTWARE DEMONSTRATION FORUM IBlock 2.2: Tuesday, July 16, 2013 (10:30 am – 12:15 pm)2.2A (MF-16-2) PLASTIC PIPES—SESSION 22.2B (SPC-1-4) STUDENT PAPER COMPETITION IV—PHD LEVEL2.2C (CS-3-4) ENVIRONMENTAL FATIGUE ISSUES-IV2.2E (MF-4-5) WELDED STRUCTURES AND CRACK GROWTH CONSID-

ERATIONS2.2F (CS-13-1) HIGH TEMPERATURE CODES AND STANDARDS2.2G (DA-2-2) DESIGN & ANALYSIS OF PIPING & PIPING COMPONENTS II2.2H (NDE-2-1) RECENT DEVELOPMENTS IN NDE TECHNOLOGY—I2.2J (SE-6-1) EUROPEAN RESEARCH ON STRUCTURAL SAFETY OF IN-

DUSTRIAL FACILITIES (INDUSE PROJECT)—SESSION 12.2K (OAC-1-2) SAFETY, RELIABILITY AND RISK ASSESSMENT FOR NON-

NUCLEAR APPLICATIONS2.2L (CT-6-1) ELEVATED TEMPERATURE BEHAVIOR OF BOLTED JOINTS2.2M (DA-8-1) FITNESS FOR SERVICE 12.2N (FSI-2-5) FIV IN HEAT EXCHANGER TUBE ARRAYS2.2O (MF-5-2) EUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY—II2.2S (CT-15-2) SOFTWARE DEMONSTRATION FORUM IIBlock 2.3: Tuesday, July 16, 2013 (2:00 pm – 3:45 pm)2.3A (MF-25-1) COMPOSITE PRESSURE VESSELS2.3B (SPC-1-6) STUDENT PAPER SYMPOSIUM II2.3C (MF-11-1) INTEGRITY ISSUES IN SCC AND CORROSION FATIGUE—12.3D (FSI-3-1) 17TH INTERNATIONAL SYMPOSIUM ON EMERGING TECH-

NOLOGY FOR FLUIDS, STRUCTURES, AND FLUID-STRUC-TURE INTERACTIONS FLUID-STRUCTURE INTERACTIONAND PLANT COMPONENTS

2.3E (MF-4-6) FINITE ELEMENT MODELING OF RESIDUAL STRESS INTHICK COMPONENTS

2.3F (CS-13-2) DEVELOPMENTS IN HIGH TEMPERATURE CODES ANDSTANDARDS

2.3G (DA-2-3) DESIGN & ANALYSIS OF PIPING & PIPING COMPONENTSIII

2.3H (NDE-4-1) PLANT INSPECTION ISSUES2.3J (SE-6-2) EUROPEAN RESEARCH ON STRUCTURAL SAFETY OF IN-

DUSTRIAL FACILITIES (INDUSE PROJECT)—SESSION 22.3K (CS-15-1) PROBABILISTIC AND RISK BASED ASSESSMENT FOR

CODES AND STANDARDS2.3L (OAC-3-1) MONITORING, DIAGNOSTICS AND INSPECTION2.3M (DA-8-2) FITNESS FOR SERVICE 22.3N (FSI-2-6) PIPING VIBRATIONS AND ACOUSTICS II2.3O (MF-7-1) MATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER

PLANTS—I2.3Q (TW-1-8) BOLTED JOINT DESIGN, ANALYSIS, AND CODE COMPLI-

ANCE—PART I2.3S (CT-15-3) SOFTWARE DEMONSTRATION FORUM IIIBlock 2.4: Tuesday, July 16, 2013 (4:00 pm – 5:45 pm)2.4A (MF-25-2) COMPOSITE PIPING SYSTEMS2.4B (SPC-1-7) STUDENT PAPER SYMPOSIUM III2.4C (MF-11-2) INTEGRITY ISSUES IN SCC AND CORROSION FATIGUE—22.4D (FSI-3-2) 17TH INTERNATIONAL SYMPOSIUM ON EMERGING TECH-

NOLOGY FOR FLUIDS, STRUCTURES, AND FLUID-STRUC-TURE INTERACTIONS FLUID-STRUCTURE INTERACTIONAND WAVE PROPAGATION

2.4E (MF-4-7) RESIDUAL STRESS FIELDS IN DISSIMILAR MATERIAL

WELDS AND THICK COMPONENTS2.4F (CS-13-3) HIGH TEMPERATURE CODES AND STANDARDS FOR DE-

SIGN2.4G (DA-2-4) DESIGN & ANALYSIS OF PIPING & PIPING COMPONENTS IV2.4H (CS-19-1) INTEGRITY OF CAST STAINLESS STEEL PIPE2.4I (FSI-4-1) EFFECTS OF BLAST, THERMAL AND ACOUSTIC LOADS2.4J (SE-8-1) BASE ISOLATION AND STRUCTURAL CONTROL TECHNOL-

OGY I2.4L (OAC-3-2) MONITORING, DIAGNOSTICS AND INSPECTION2.4M (DA-8-3) FITNESS FOR SERVICE 32.4N (FSI-2-8) PIPING VIBRATIONS AND ACOUSTICS III2.4O (MF-7-2) MATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER

PLANTS—II2.4O (MF-7-1) MATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER

PLANTS—II2.4Q (TW-1-8) BOLTED JOINT DESIGN, ANALYSIS, AND CODE COMPLI-

ANCE—PART III2.4S (CT-15-4) SOFTWARE DEMONSTRATION FORUM IV

Wednesday, July 17, 2013

Block 3.1: Wednesday, July 17, 2013 (8:30 am – 10:15 am)3.1A (HT-6-1) COMPOSITE MATERIALS FOR HIGH PRESSURE VESSELS

AND COMPONENTS3.1B (CT-10-1) COMPUTATIONAL APPLICATIONS IN FATIGUE, FRACTURE

AND DAMAGE MECHANICS3.1C (CS-26-1) FATIGUE MONITORING AND RELATED ASSESSMENT

METHODS—I3.1D (CS-4-1) INTERACTION AND FLAW MODELING FOR MULTIPLE

FLAWS—I3.1E (CS-5-1) TECHNICAL HARMONIZATION AND EMERGING CODES

AND STANDARDS-13.1F (DA-7-1) THERMAL STRESSES AND ELEVATED TEMPERATURE DE-

SIGN 13.1G (DA-4-1) LIMIT LOAD ANALYSIS 13.1H (DA-1-3) DESIGN AND ANALYSIS OF PRESSURE VESSELS AND

COMPONENTS III3.1I (HT-2-1) STRUCTURAL RESPONSE TO HIGHLY DYNAMIC (IMPUL-

SIVE) EVENTS I3.1J (SE-9-1) SEISMIC RESPONSE MITIGATION FOR MECHANICAL

STRUCTURES AND ENERGY FACILITIES3.1K (CT-12-1) PROBABILISTIC AND RISK BASED ASSESSMENT3.1L (DA-10-1) ADVANCED DESIGN AND ANALYSIS OF BOLTED JOINTS3.1M (MF-6-1) FFS13.1N (FSI-2-9) TUBE-SUPPORT DYNAMICS AND FRETTING WEAR3.1O (MF-12-1) FRACTURE TOUGHNESS TESTING AND INTEGRITY AS-

SESSMENT3.1Q (TW-1-9) COMPUTATIONAL WELD MODELING—PART IBlock 3.2: Wednesday, July 17, 2013 (10:30 am – 12:15 pm)3.2A (MF-2-1) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT-13.2B (MF-28-1) MANUFACTURING AND MITIGATION PROCESS SIMULA-

TION3.2C (CS-26-2) FATIGUE MONITORING AND RELATED ASSESSMENT

METHODS—II3.2D (FSI-6-1) SESSION 13.2E (CS-5-2) TECHNICAL HARMONIZATION AND EMERGING CODES

AND STANDARDS-23.2F (DA-7-2) THERMAL STRESSES AND ELEVATED TEMPERATURE DE-

SIGN 23.2G (DA-4-3) SHAKEDOWN AND RATCHETING ANALYSIS3.2H (CS-4-2) INTERACTION AND FLAW MODELING FOR MULTIPLE

FLAWS—II3.2I (HT-2-2) STRUCTURAL RESPONSE TO HIGHLY DYNAMIC (IMPUL-

SIVE) EVENTS II3.2J (SE-7-1) SEISMIC RESPONSE AND DESIGN OF STORAGE TANKS,

13

PIPING AND OTHER COMPONENTS3.2K (MF-17-1) FRACTURE RELIABILITY AND PROBABILISTIC ASSESS-

MENT OF FAILURE3.2L (DA-10-2) ASSEMBLY OF BOLTED JOINTS3.2M (MF-6-2) FFS23.2N (FSI-2-10) AXIAL AND LEAKAGE-FLOW-INDUCED VIBRATION II3.2O (MF-12-2) DYNAMIC FRACTURE AND CRACK ASSESSMENT3.1Q (TW-1-9) COMPUTATIONAL WELD MODELING—PART II

Thursday, July 18, 2013

Block 4.1: Thursday, July 18, 2013 (8:30 am – 10:15 pm)4.1A (MF-2-2) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT-24.1C (DA-3-1) LARGE YIELDING ISSUES IN FATIGUE4.1D (CS-1-1) STRUCTURAL INTEGRITY OF PRESSURE COMPONENTS—I4.1E (CS-28-1) FRACTURE AND MECHANICAL PROPERTY PREDICTIONS

BY SUB-SIZED SPECIMENS FOR STANDARDS4.1F (MF-19-1) CREEP CRACK INITIATION AND GROWTH4.1G (DA-4-4) NONLINEAR ANALYSIS 14.1H (MF-3-1) MATERIALS FOR HYDROGEN SERVICE I4.1I (CS-11-1) CHINESE EXTREME PRESSURE EQUIPMENT4.IJ (OAC-6-2) RELIABILITY OF WELDMENT4.1K (CS-10-1) FATIGUE, SCC, FIV AND STRESS INTENSITY FACTOR SO-

LUTIONS4.1L (DA-10-3) PANEL SESSION: INTERNATIONAL PROGRESS IN BOLTED

JOINT INTEGRITY—PANEL SESSION I4.1M (OAC-6-4) USE OF FINITE ELEMENT MODELING4.1N (FSI-2-13) SELECTED TOPICS IN FSI4.1O (MF-10-1) MECHANISTIC MODELING OF MATERIALS—IBlock 4.2: Thursday, July 18, 2013 (10:30 am – 12:15 pm)4.2A (MF-2-3) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT—34.2C (DA-3-2) THERMAL FATIGUE4.2D (CS-1-2) STRUCTURAL INTEGRITY OF PRESSURE COMPONENTS—II4.2E (MF-13-1) SMALL SCALE TESTING4.2F (MF-19-2) CREEP-FATIGUE AND FRACTURE4.2G (CT-9-1) COMPUTATIONAL TOPICS IN EXPLICIT FEA4.2H (MF-3-2) MATERIALS FOR HYDROGEN SERVICE II

4.2I (CS-11-2) INTEGRITY MANAGEMENT USING ACOUSTIC EMISSION4.2J (SE-8-2) BASE ISOLATION AND STRUCTURAL CONTROL TECHNOL-

OGY II4.2K (CS-10-2) STRUCTURAL INTEGRITY OF RPV4.2L (DA-10-4) PANEL SESSION: INTERNATIONAL PROGRESS IN BOLTED

JOINT INTEGRITY—PANEL SESSION II4.2M (OAC-6-5) CONTINUED SAFE OPERATION - CASE HISTORIES4.2N (FSI-2-14) PIPING VIBRATIONS AND ACOUSTICS IV4.2O (MF-10-2) MECHANISTIC MODELING OF MATERIALS—IIBlock 4.3: Thursday, July 18, 2013 (2:00 pm – 3:45 pm)4.3A (MF-2-4) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT-44.3C (DA-3-3) FATIGUE DESIGN4.3E (MF-13-4) SMALL-SCALE AND MINIATURE TESTING4.3F (MF-19-3) CREEP DEFORMATION AND DAMAGE I4.3G (DA-12-1) PROBABILISTIC METHODS IN DESIGN AND ANALYSIS 14.3H (MF-3-3) MATERIALS FOR HYDROGEN SERVICE III4.3I (CS-11-3) STRUCTURAL INTEGRITY OF CHINESE PRESSURE EQUIP-

MENT4.3J (SE-8-3) BASE ISOLATION AND STRUCTURAL CONTROL TECHNOL-

OGY III4.3K (CS-10-3) DESIGN AND CONSTRUCTION OF FAST REACTOR I4.3L (OAC-6-1) ADVANCES IN SEALING TECHNOLOGY4.3M (OAC-4-1) TOXIC SUBSTANCES: RADIOACTIVE MATERIALS4.3O (MF-10-3) MECHANISTIC MODELING OF MATERIALS—IIIBlock 4.4: Thursday, July 18, 2013 (4:00 pm – 5:45 pm)4.4A (MF-2-5) APPLICATION OF FRACTURE MECHANICS IN FAILURE AS-

SESSMENT-54.4C (DA-3-4) FATIGUE TESTING AND IN SITU MEASUREMENTS4.4E (MF-4-8) RESIDUAL STRESS IN REPAIR WELDING4.4F (MF-19-4) CREEP DEFORMATION AND DAMAGE II4.4G (DA-5-1) STRESS CLASSIFICATION & DESIGN BY ANALYSIS

METHODOLOGIES4.4H (MF-21-1) ADVANCED MANUFACTURING AND MATERIALS TECHNOL-

OGY FOR NEW NUCLEAR BUILD4.4I (CS-11-4) EXAMPLE OF ENGINEERING FAILURE ANALYSIS IN CHINA4.4K (CS-10-4) DESIGN AND CONSTRUCTION OF FAST REACTOR II4.4O (MF-14-1) LEAK-BEFORE-BREAK (1)

14

SUNDAY, JULY 14

no textBlock 0.1: Sunday, July 14 (9:00 am – 11:30 am)

no textSESSION 0.1Q (TW-1-2)Sunday, July 14, 9:00 am – 11:30 am, Level 2, Les Invalides A+BMICROWAVE NDE TECHNIQUES RUBBER EXPANSION JOINTS AND HDPEBUTT FUSIONS IN POWER PLANTSSponsored by Evisive, Inc.Developed by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: R. Stakenborghs, Evisive, Inc.

no textBlock 0.2: Sunday, July 14 (1:00 pm – 3:30 pm)

no textSESSION 0.2Q (TW-1-4)Sunday, July 14, 1:00 pm – 3:30 pm, Level 2, Les Invalides A+BNDT WORKSHOPSponsored by the International Committee on NDT (ICNDT) and theEuropean Federation for NDT (EFNDT)Developed by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: J. Thompson, M. Farley, ICNDT; R. Holstein, DGZfP; C. Sinclair,

BINDT; A. Mullin, RTC; M. Turnbow, ASME

no textBlock 0.3: Sunday, July 14 (4:00 pm – 6:00 pm)

no textSESSION 0.3Q (TW-1-5)Sunday, July 14, 4:00 pm – 6:00 pm, Level 2, Les Invalides A+BPERSPECTIVES ON ENGINEERING CAREER PATH DEVELOPMENT—WHAT IT TAKES AND WHERE IT LEADSSponsored by the PVP Division Conference CommitteeDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, Egypt

Presented by: I. Ezekoye, Westinghouse Electric Company, Cranberry Woods,PA, USA; L. H. Geraets, GDF SUEZ Nuclear DevelopmentDivision, Brussels, Belgium; C. Becht IV, Becht Engineering Co.Inc., Liberty Corner, NJ, USA; T. Tahara, Petroleum Associationof Japan, Tokyo, Japan; A. Cheta, Shell Exploration andProduction Company, Houston, TX, USA

MONDAY, JULY 15

no textBlock 1.1: Monday, July 15 (8:30 am – 10:15 am)

no textSESSION 1.1B (SPC-1-5)Monday, July 15, 8:30 am – 10:15 am, Level -1, Ella Fitzgerald ASTUDENT PAPER SYMPOSIUM IDeveloped by: Y. W. Kwon, Naval Postgraduate School, Monterey, CA, USA;

R. S. Hafner, Lawrence Livermore National Laboratory,Livermore, CA, USA

Chair: Y. Shoji, Shoji Technology Consulting, Musashino, Tokyo, JapanCo-Chair R. Adibiasl, AMEC NSS, Toronto, CanadaPVP2013-97763: EXPERIMENTAL INVESTIGATION ON MINIMUM DESIGNMETAL TEMPERATURE OF Q345R STEELX. Shu, J. Zheng, Zhejiang University, Hangzhou, Zhejiang, China; B. Shou,China Special Equipment Inspection and Research Institute, Beijing, ChinaPVP2013-97282: EFFECT OF MAKE-UP ON THE STRUCTURALPERFORMANCE OF STANDARD BUTTRESS CONNECTIONS SUBJECTEDTO TENSILE LOADINGT. Galle, W. De Waele, P. De Baets, Ghent University, Zwijnaarde, BelgiumPVP2013-97051: A REVIEW OF STATE-OF-THE-ART METHODS FORPRESSURE VESSELS DESIGN AGAINST PROGRESSIVE DEFORMATIONP. Rohart, Cetim, Senlis, France; S. Hariri, Ecole des Mines de Douai, Douai,France; Y. Simonet, Cetim, Senlis, FrancePVP2013-97278: MEASUREMENT AND SIMULATION OF WATER HAMMERIN PIPING SYSTEMS INCLUDING JUNCTION COUPLINGS. Riedelmeier, S. Becker, E. Schlücker, Institute of Process Machinery andSystems Engineering iPAT, University Erlangen-Nuremberg, Erlangen, Bayern,GermanyPVP2013-97657: EVALUATION OF MASS TRANSFER COEFFICIENTUNDER SWIRL FLOW GENERATED BY THE COMBINATION OF PIPE ELE-MENTS—PART 2K. Yamamoto, T. Nakamura, S. Suzuki, Osaka University, Osaka, JapanSESSION 1.1C (CS-2-1)Monday, July 15, 8:30 am – 10:15 am, Level -1, Miles Davis CRATCHETING AND FATIGUE ISSUES IN PRESSURE VESSEL AND PIPINGDESIGN—IDeveloped by: R. Adibiasl, AMEC NSS, Toronto, Canada; W. Reinhardt, Candu

Energy Inc., Mississauga, ON, CanadaChair: W. Reinhardt, Candu Energy Inc., Mississauga, ON, CanadaCo-Chair: J. Rudolph, AREVA GmbH, Erlangen, Bavaria, GermanyPVP2013-97399: FATIGUE BEHAVIOR OF CLADDING MATERIAL FORNUCLEAR COMPONENTSK.-H. Herter, X. Schuler, M. Hoffmann, P. Kopp, MPA University Stuttgart,Stuttgart, Baden-Württemberg, Germany; J. Mahlke, Federal Office for RadiationProtection, Salzgitter, GermanyPVP2013-97400: FATIGUE BEHAVIOR OF DISSIMILAR WELDS USED FORNUCLEAR PIPINGK.-H. Herter, X. Schuler, M. Hoffmann, P. Kopp, MPA University Stuttgart,Stuttgart, Baden-Württemberg, Germany

DAILY SESSION LISTINGSessions are arranged in Session Blocks in the format X.YZ, where: X indicates the Day, Y indicates the Session Block, and Z indicates the Conference Session Room.Conference Session Rooms are as follows: A = Ella Fitzgerald B; B = Ella Fitzgerald A; BLRM = La Seine Ballroom; C = Miles Davis C; D = Miles Davis B; E = MilesDavis A; F = Louis Armstrong A+B; G = Louis Armstrong C+D; H = Pont De Sully A+B; I = Pont Des Arts A; J = Pont Des Arts B; K = Pont Des Arts C; L = St. Michel;M = St. Germain Des Pres A+B; N = Le Parc Montsouris A; O = Le Parc Montsouris B; P = Not Used; Q = Les Invalides A+B; R = Not Used; S = Foyer La Seine; T =Not Used. The parenthetical designations are the Technical Committee session references.

The Technical Committee acronyms used are shown below: • CS = Codes & Standards • CT = Computer Technology & Bolted Joints • DA = Design & Analysis • FSI = Fluid–Structure Interaction • HT = High Pressure Technology • MF = Materials & Fabrication • NDE = ASME Nondestructive Evaluation Division • OAC = Operations, Applications, and Components • SE = Seismic Engineering • SPC = Rudy Scavuzzo Student Paper Symposium & Student Paper

Competition • TW = Technical Tutorials and Workshops

Note: Unless specifically listed in the individual sessions below, all ses-sions are sponsored by the indicated Technical Committee.

15

PVP2013-97568: THE SIMPLIFIED METHOD FOR FATIGUE ASSESSMENTOF THE EUROPEAN PRESSURE VESSEL STANDARD EN 13445F. Lidonnici, Sant’Ambrogio Servizi Industriali Srl, Milano, ItalyPVP2013-97756: EFFECTS OF STRAIN RATE ON THE VERY HIGH CYCLEFATIGUE PROPERTIES OF LOW ALLOY STEEL SFVQ1AT. Nakamura, H. Oguma, S. Nukaya, Hokkaido University, Sapporo, Hokkaido,JapanPVP2013-98150: USING THE NONLINEAR KINEMATIC HARDENINGMATERIAL MODEL OF CHABOCHE FOR ELASTIC-PLASTIC RATCHETINGANALYSISA. Kalnins, Lehigh University, Bethlehem, PA, USA; J. Rudolph, A. Willuweit,AREVA GmbH, Erlangen, Bavaria, GermanySESSION 1.1D (FSI-1-1)Monday, July 15, 8:30 am – 10:15 am, Level -1, Miles Davis BFLUID FLOW AND HEAT TRANSFER—IDeveloped by: A. Tijsseling, TU Eindhoven, Eindhoven, Netherlands; J. C. Jo,

KINS, Daejon, Korea (Republic)Chair: A. Tijsseling, TU Eindhoven, Eindhoven, NetherlandsCo-Chair J. C. Jo, KINS, Daejon, Korea (Republic)PVP2013-97082: THE IN VESSEL RETENTION STRATEGY TO MITIGATETHE SEVERE ACCIDENTS FOR THE VVER 1000/320 TYPE NPPSJ. Zdarek, Nuclear Research Institute, Prague, Czech RepublicPVP2013-97121: NUMERICAL ANALYSIS OF HEAT TRANSFER AND FLOWIN A PASSIVE CONDENSATION HEAT EXCHANGERJ. C. Jo, K. S. Do, KINS, Daejon, Korea (Republic); Y. K. Lee, ANFLUX, Seoul,Korea (Republic)PVP2013-97122: UPWIND NUMERICAL SCHEMES FOR A HYPERBOLICTWO-PHASE FLOW MODELM. S. Chung, Korea Institute of Energy Research, Daejeon, Korea (Republic); Y.-G. Jung, S. J. Yi, Korea Atomic Energy Research Institute, Daejeon, Korea(Republic)PVP2013-97809: COMMISSIONING TESTS FOR AN EXPERIMENTAL STUDYOF STEAM GENERATOR TUBE LOADING DURING BLOWDOWNO. Hamouda, D. S. Weaver, McMaster University, Hamilton, ON, Canada; J.Riznic, Canadian Nuclear Safety Commission, Ottawa, ON, CanadaSESSION 1.1E (MF-4-1)Monday, July 15, 8:30 am – 10:15 am, Level -1, Miles Davis AMETALLURGICAL MODELS FOR WELDING SIMULATIONDeveloped by: D. L. Rudland, US Nuclear Regulatory Commission, Rockville,

MD, USAChair: F. W. Brust, Engineering Mechanics Corp of Columbus,

Columbus, OH, USACo-Chair P. Gilles, Areva NP, Paris, FrancePVP2013-97426: EVOLUTION OF MECHANICAL BEHAVIOR OF 6XXX ALU-MINUM ALLOY DUE TO THE PRECIPITATION STATE DURING A THERMO-MECHANICAL PROCESSD. Bardel, INSA Lyon, LaMCoS Laboratory, Villeurbanne, France; M. Perez,Université de Lyon, Villeurbanne, France; D. Nelias, INSA-Lyon, CNRS,Villeurbanne, France; T. Chaise, INSA Lyon, LaMCoS Laboratory, Villeurbanne,France; J. Garnier, CEA Saclay, Gif sur Yvette, France; F. Bourlier, Areva NP,Lyon, FrancePVP2013-97684: INFLUENCE OF PHASE TRANSFORMATIONS ONRESIDUAL STRESSES IN WELDED STRUCTURESR. Dennis, Frazer-Nash Consultancy, Bristol, United Kingdom; R. Kulka, Frazer-Nash Consultancy Ltd., Dorking, United Kingdom; O. Muransky, AustralianNuclear Science and Technology Organisation, Kirrawee DC, NSW, Australia;M.C Smith, EDF Energy Nuclear Generation Ltd., Gloucester, United KingdomPVP2013-98021: PHASE TRANSFORMATION PROPERTIES SENSITIVITYSTUDY IN A FERRITIC GROOVE WELDB. Pellereau, Rolls-Royce Group, PLC, Derby, United Kingdom; P. Hurrell, Rolls-Royce Marine, Sheffield, United Kingdom; C. M. Gill, Rolls-Royce Marine, Derby,United Kingdom; J. Francis, University of Manchester, Manchester, UnitedKingdom; S. Bate, AMEC, Warrington, Merseyside, United KingdomPVP2013-97491: PREDICTION OF PIPE GIRTH WELD RESIDUAL STRESSPROFILES USING ARTIFICIAL NEURAL NETWORKS

J. Mathew, R. J. Moat, P. J. Bouchard, The Open University, Milton Keynes,Buckinghamshire, United KingdomSESSION 1.1F (DA-9-1)Monday, July 15, 8:30 am – 10:15 am, Level -1, Louis Armstrong A+BPIPING DYNAMICSDeveloped by: M. Porter, Porter McGuffle Inc., Lawrence, KS, USAChair: R. Baliga, ADVENT Engineering Services, Inc., San Ramon,

CA, USACo-Chair A. Dweib, Worley Parsons, Atyrau, KazakhstanPVP2013-97489: DEFINITION OF A CUT-OFF NATURAL FREQUENCY FORSMALL BORE PIPEWORK CONNECTIONSJ. McGhee, Xodus Group Limited, Glasgow, ScotlandPVP2013-97595: DYNAMIC RESPONSE OF A PIPING SYSTEM UNDERHARMONIC EXCITATIONS CONSIDERING PIPE-SUPPORT FRICTION WITHVARIABLE NORMAL LOADSJ. Arguelles, Sinclair Knight Merz Ltd., Caracas, Miranda, Venezuela; E.Casanova, Universidad Simon Bolivar, Caracas, Miranda, VenezuelaPVP2013-97694: SYSTEM IDENTIFICATION AND REDUCTION OFVIBRATIONS OF PIPING IN DIFFERENT CONDITIONSG. Hinz, K. Kerkhof, MPA Universität Stuttgart, Stuttgart, Baden-Württemberg,GermanySESSION 1.1G (DA-1-1)Monday, July 15, 8:30 am – 10:15 am, Level -1, Louis Armstrong C+DDESIGN AND ANALYSIS OF PRESSURE VESSELS AND COMPONENTS IDeveloped by: A. Avery, Northwest Redwater Partnership, Calgary, AB,

Canada; M. Zhao, Chevron, Houston, TX, USA; C. Rodery, BPCorporation North America, Inc., League City, TX, USA

Chair: A. Avery, Northwest Redwater Partnership, Calgary, AB,Canada

Co-Chair T. G. Seipp, Becht Engineering Canada, Ltd., Calgary, AB,Canada

PVP2013-97035: OUTER SURFACE PRIOR TO INNER SURFACE DOUBLEAUTOFRETTAGE TECHNIQUE FOR A COMPOUND CYLINDERO. R. Abdelsalam, R. Sedaghati, Concordia University, Montreal, QC, CanadaPVP2013-97038: STRESS AND STRAIN FIELDS IN THE HEMISPHERICALHEAD OF AN FCC REGENERATOR DURING THE LIFTING MANEUVER INCYCLONE REPLACEMENTE. Garrido, Inelectra Colombia S.A.S., Bogota, Cundinamarca, Colombia; E.Casanova, Universidad Simon Bolivar, Caracas, Miranda, VenezuelaPVP2013-97052: ASSESSMENT OF THE INFLUENCE OF BULGING ANDTHERMAL GRADIENTS IN THE STRESS LEVEL IN THE CYLINDRICALSECTION OF A COKE DRUME. Araque, G. Vivas, PDVSA-INTEVEP, Los Teques, VenezuelaPVP2013-97511: A CRITICAL REVIEW OF TEMA 2007S PROCRDURE FORFINITE ELEMENT ANALYSIS OF THICK WALL EXPANSION JOINTSA. Taghizadeh, M. Obeydi, M. R. Fakhary, Hampa Energy Engineering andDesign Co., Shiraz, Fars, IranSESSION 1.1H (HT-1-1)Monday, July 15, 8:30 am – 10:15 am, Level 0, Pont De Sully A+BDESIGN, ANALYSIS, FABRICATION, OPERATION AND MAINTENANCE OFHIGH-PRESSURE EQUIPMENTDeveloped by: N. McKie, FMC Technologies, Houston, TX, USA; D. L. Stang,

OMAX Corporation, Kent, USA; C. SmithChair: D. L. Stang, OMAX Corporation, Kent, USACo-Chair N. McKie, FMC Technologies, Inc., Houston, TX, USAPVP2013-97006: THREE-DIMENSIONAL STRESS INTENSITY FACTORSFOR RING CRACKS AND ARRAYS OF COPLANAR CRACKS EMANATINGFROM THE INNER SURFACE OF A SPHERICAL PRESSURE VESSELM. Perl, Ben Gurion University of the Negev, Beer Sheva, Israel; V. Berenshtein,Enopace Biomedical Ltd., Caesarea, IsraelPVP2013-97927: NEW CHALLENGES IN THE PRODUCTION OF ULTRALARGE FORGINGS FOR THE MANUFACTURING OF PRESSURE VESSELSJ. Talamantes-Silva, Sheffield Forgemasters RD26, Sheffield, United Kingdom;P. Bates, Sheffield Forgemasters International Ltd., Sheffield, United Kingdom;

16

A. Hambleton, Sheffield Forgemasters Engineering Ltd., Sheffield, UnitedKingdom; P. Davies, S. Al-Bermani, Sheffield Forgemasters RD26 Ltd., Sheffield,United Kingdom; D. Bunney, Sheffield Forgemasters Engineering Ltd., Sheffield,United KingdomPVP2013-97053: DEEP WELL DRILLING APPLICATIONSN. McKie, FMC Technologies, Houston, TX, USA; D. T. Peters, StructuralIntegrity Associates, Edinboro, PA, USA; K. A. Tooley, FMC Technologies, Inc.,Houston, TX, USAPVP2013-98168: HOT ISOSTATIC PRESSING OF POWDER METAL AS ANALTERNATIVE TO FORGING OF SA-723A. Eklund, S. Sehlstedt, Avure Technologies AB, Västerås, SwedenSESSION 1.1I (DA-14-1)Monday, July 15, 8:30 am – 10:15 am, Level 0, Pont De Arts AFRACTURE 1Developed by: D. Moinereau, Electricite de France, Moret sur Loing, FranceChair: S. Krishnamurthy, UOP, Des Plaines, IL, USACo-Chair J. Taagepera, Chevron ETC, Richmond, CA, USAPVP2013-97010: EFFECTS OF TEMPERATURE CHANGES ON CREEPCRACK GROWTH FOR A LOW ALLOY BUTT WELDJ. Shi, AMEC, Gloucester, United KingdomPVP2013-97153: VALIDATING THE MECHANICAL NATURE OF THE TESTSPEICMEN THICKNESS EFFECT ON FRACTURE TOUGHNESS IN THETRANSITION TEMPERATURE REGIONT. Meshii, K. Lu, R. Takamura, University of Fukui, Fukui, JapanPVP2013-97177: BENCHMARK ON RESIDUAL STRESS MODELING INFRACTURE MECHANICS ASSESSMENTS. Marie, CEA, Gif sur Yvette, France; S. Chapuliot, AREVA, Paris, France; H.Deschanels, AREVA, Lyon, France; P. Le Delliou, EDF, Moret sur Loing, FrancePVP2013-97347: COD OF OFF-CENTERED CRACKS IN PIPES UNDERBENDING: EXPERIMENTAL MEASURES AND MODEL VALIDATIOND. Gentile, G. Iannitti, N. Bonora, University of Cassino and Southern Lazio,Cassino, ItalySESSION 1.1J (SE-2-1)Monday, July 15, 8:30 am – 10:15 am, Level 0, Pont De Arts BSTRUCTURAL DYNAMICS—LINEAR AND NONLINEARDeveloped by: K. Fujita, Osaka City University, Osaka-prefecture, JapanChair: K. Fujita, Osaka City University, Osaka-prefecture, JapanCo-Chair A. Iwasaki, Mitsubishi Heavy Industries, Ltd., Hyogo-pref, JapanPVP2013-97225: A RESPONSE SPECTRUM APPROACH USING MODELORDER REDUCTION FOR SEISMIC ANALYSISJ. Oh, J. Choi, J.-S. Ryu, Korea Atomic Energy Research Institute, Daejeon,Korea (Republic)PVP2013-97571: THE EFFECTS OF GRAVITY ON STRUCTURAL VIBRATIONJ. W. Jones, J. William Jones Consulting Engineers, Inc., Huntington Beach, CA,USA; R. Nickell, Applied Science & Technology, San Diego, USA; W. Bulat,ANSYS, Inc., Encinitas, CA, USAPVP2013-97584: A STUDY OF APPLICABILITY OF FINITE DISPLACEMENTANALYSES WITH SEMI-ANALYTICAL FINITE ELEMENTS FOR ANALYZINGUPLIFT DISPLACEMENT OF FLAT-BOTTOM CYLINDRICAL SHELL TANKSSTATICALLYT. Nakashima, Jip Techno-Science, Osaka, Japan; T. Taniguchi, TottoriUniversity, Tottori, JapanPVP2013-97850: ANALYSIS OF WAVE PROPAGATION OF OVERHEADCONTACT WIRE OF TRAINS BY THE TRANSFER MATRIX METHODT. Fukui, T. Asami, T. Ise, University of Hyogo, Himeji, JapanSESSION 1.1K (OAC-8-1)Monday, July 15, 8:30 am – 10:15 am, Level 0, Pont De Arts CPLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENT IDeveloped by: G. Bezdikian, Georges Bezdikian Consulting, Le Vesinet,

France; G. Young, Entergy Nuclear, Russellville, AR, USAChair: G. Young, Entergy Nuclear, Russellville, AR, USACo-Chair G. Bezdikian, Georges Bezdikian Consulting, Le Vesinet,

FrancePVP2013-97535: PLIM LESSONS AFTER FUKUSHIMA

H. Rothenhöfer, AMTEC Messtechnischer Service GmbH, Lauffen, GermanyPVP2013-97674: EFFICIENT PROBABILISTIC CALCULATION OF ATHERMAL TRANSIENT ON A 3D FE MODEL WITH VARIABLE HEATEXCHANGE COEFFICIENTT. Demol, N. Tartare, J.-P. Izard, AREVA NP, Paris, FrancePVP2013-97962: LONG TERM OPERATION OF NUCLEAR POWERPLANTS—STATUS IN THE U.S.G. Young, Entergy Nuclear, Russellville, AR, USAPVP2013-97570: IAEA ACTIVITIES ON CONCRETE AGEING INCONTAINMENT AND OTHER STRUCTURES IN NUCLEAR POWER PLANTSJ. Moore, IAEA, Vienna, Vienna, Austria; K. Kang, Intl Atomic Energy Agy,Vienna, AustriaSESSION 1.1L (CT-1-1)Monday, July 15, 8:30 am – 10:15 am, Level 2, St. MichelDESIGN AND ANALYSIS OF BOLTED FLANGE JOINTSDeveloped by: H. A. Bouzid, École de Technologie Supérieure, Laval, QC,

CanadaChair: J. Veiga, Teadit Industria e Comercio Ltda, Rio de Janeiro,

BrazilCo-Chair T. Sawa, Hiroshima University, Higashi-hiroshima City, JapanPVP2013-97432: PRACTICAL SEALING FOR COMMON GASKETMATERIALS AND CONSTRUCTION TYPESA. Bausman, VSP Technologies, Kingspoint, TN, USA; J. Waterland, VSPTechnologies, Prince George, VA, USAPVP2013-97710: A TECHNICAL AND ECONOMIC COMPARISON OF RAISEDFACE VERSUS RING JOINT FLANGESC. Reichert, Hatch Ltd., Calgary, AB, Canada; B. Messer, Fluor Canada Ltd.,Calgary, AB, Canada; L. Reichert, Consultant, Calgary, AB, CanadaPVP2013-97828: FEM STRESS ANALYSIS AND THE SEALING PERFORM-ANCE EVALUATION OF BOLTED FLANGED CONNECTIONS WITH METALFLAT GASKETSK. Kondo, Shinko Plantech Co Ltd., Yokohama, Japan; S. Tsubaki, T. Sawa, Y.Omiya, Hiroshima University, Higashi-hiroshima, Hiroshima, Japan; K. Sato,Nippon Valqua Industries, Ltd., Gojo, Nara, JapanPVP2013-97861: DEVELOPMENT OF DESIGN PROCEDURE FORGASKETED PIPE FLANGE CONNECTIONS BASED ON ALLOWABLE LEAKRATESS. Nagata, Toyo Engineering Corporation, Chiba, Japan; Y. Oyama, HighPressure Technology Institute of Japan, Tokyo, Japan; T. Sawa, HiroshimaUniversity, Higashi-hiroshima City, Japan; T. Kobayashi, Numazu College ofTechnology, Numazu, Shizuoka, Japan; R. Kurosawa, Yokogawa ElectricCorporation, Kofu, JapanPVP2013-97938: PROPOSED MODIFICATIONS IN THE FLANGE CALCULA-TION PROCEDUREM. Schaaf, AMTEC Services GmbH, Lauffen, GermanySESSION 1.1N (FSI-2-1)Monday, July 15, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris AVIBRATIONS OF PLANT COMPONENTS: SPECIAL SESSION IN MEMORYOF JOHN FITZPATRICKDeveloped by: N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,

CanadaChair: S. R. Ziada, McMaster University, Hamilton, ON, CanadaCo-Chair J. Antunes, Instituto Superior Tecnico, Sacavem, PortugalPVP2013-97141: THE EFFECT OF FLUID-RESONANT COUPLING IN HIGH-SPEED IMPINGING PLANAR JET FLOWSD. Arthurs, University of Ontario Institute of Technology, Hamilton, ON, Canada;S. R. Ziada, McMaster University, Hamilton, ON, CanadaPVP2013-98163: NON-LINEAR ANALYSIS OF STEAM GENERATOR U TUBEIN-PLANE VIBRATIONA. Kepple, M. Charrouf, D. Rackiewicz, P. Rush, MPR Associates, Alexandria,VA, USAPVP2013-97564: DEVELOPMENT OF BWR STEAM DRYER LOADINGEVALUATION METHODS THROUGH SCALE MODEL TESTS UNDERACTUAL STEAM CONDITIONSS. Takahashi, K. Okuyama, A. Tamura, Hitachi., Ltd., Hitachi, Japan; Y. Mabuchi,

17

T. Kubota, K. Yoshikawa, Hitachi-GE Nuclear Energy Ltd., Hitachi, JapanPVP2013-97918: THE EFFECT OF PUNCHING PLATES TO SUPPRESS THESLOSHING IN A GAS LIQUID SEPARATORH. Suzuki, The University of Tokyo, Tokyo, Japan; S. Kaneko, University ofTokyo, Tokyo, JapanSESSION 1.1O (MF-18-1)Monday, July 15, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris BSIMULATION OF CRACK GROWTH AND FRACTUREDeveloped by: M. Kerr, Knolls Atomic Power Laboratory, Schenectady, NY,

USA; D.-J. Shim, Engineering Mechanics Corp of Columbus,Columbus, OH, USA

Chair: R. B. Rebak, GE Global Research, Schenectady, NY, USACo-Chair D.-J. Shim, Engineering Mechanics Corp of Columbus,

Columbus, OH, USAPVP2013-97125: VALIDITY OF THE STRESS INTENSITY FACTOR UNDERTHE STEEP RESIDUAL STRESS DISTRIBUTION OR THE STEEP YIELDSTRESS DISTRIBUTIONT. Yasuoka, Y. Mizutani, A. Todoroki, Tokyo Institute of Technology, Tokyo, JapanPVP2013-97188: SIMULATING NATURAL AXIAL CRACK GROWTH INDISSIMILAR METAL WELDS DUE TO PRIMARY WATER STRESSCORROSION CRACKINGD. L. Rudland, US Nuclear Regulatory Commission, Rockville, MD, USA; D.-J.Shim, Engineering Mechanics Corp of Columbus, Columbus, OH, USA; S. Xu,Kinectrics, Toronto, ON, CanadaPVP2013-97237: SIMULATING RE-HEAT CRACKING IN AN EX-SERVICEDAISI 316H WELD HEADERH. Zhou, K. M. Nikbin, C. M. Davies, F. Biglari, Imperial College London, London,United KingdomPVP2013-98041: COMPARISON OF THROUGH-WALL AND COMPLEXCRACK BEHAVIORS IN DISSIMILAR METAL WELD PIPE USING COHESIVEZONE MODELINGD.-J. Shim, Engineering Mechanics Corp of Columbus, Columbus, OH, USA; D.L. Rudland, US Nuclear Regulatory Commission, Rockville, MD, USA; F. W.Brust, Engineering Mechanics Corp of Columbus, Columbus, OH, USASESSION 1.1Q (TW-1-6)Monday, July 15, 8:30 am – 10:15 am, Level 2, Les Invalides A+BPROCESS AND BENEFITS OF ASME PRESSURE TECHNOLOGY CODES &STANDARDS DEVELOPMENTSponsored by ASME PVPD Conference Committee and the ASME Board ofPressure Technology Codes and StandardsDeveloped by: D. T. Peters, Structural Integrity Associates, Edinboro, PA, USAChair: D. T. Peters, Structural Integrity Associates, Edinboro, PA, USACo-Chair M. Rana, Praxair, Inc., Tonawanda, NY, USAPresented by: W. J. Bees, Consulting Engineer, Wadsworth, OH, USA; M.

Rana, Praxair, Inc., Tonawanda, NY, USASESSION 1.1S (MF-29-1)Monday, July 15, 8:30 am – 10:15 am, Level 0, Foyer La SeineNDE DEMONSTRATION FORUM—ISponsored by the PVP Senate, Materials & Fabrication TechnicalCommittee, and the ASME NDE DivisionDeveloped by: C. E. Jaske, Det Norske Veritas (USA), Inc., Dublin, OH, USA;

J. Todd, Penn State University, University Park, USA

no textBlock 1.2: Monday, July 15 (10:30 am – 12:15 pm)

no textSESSION 1.2BLRM (TW-1-1)Monday, July 15, 10:30 am – 12:15 pm, Level 0, La Seine Ballroom A+BOPENING CEREMONY AND PLENARY LECTURESDeveloped by: M. E. Nitzel, M. E. Nitzel Engineering Services, Nampa, USA; R.

S. Hafner, Lawrence Livermore National Laboratory, Livermore,CA, USA

Chair: M. E. Nitzel, M. E. Nitzel Engineering Services, Nampa, USACo-Chair: R. S. Hafner, Lawrence Livermore National Laboratory,

Livermore, CA, USAFITNESS-FOR-SERVICE—A TOOL FOR SAFER IN-SERVICE PRESSUREEQUIPMENT WHILE KEEPING ITS ECONOMIC PERFORMANCEA. Chaudouet, Technical Center for the Mechanical Industry (Cetim), Senlis,FranceIS HARMONIZATION OF CODES AND STANDARDS REALLY POSSIBLE?R. Barnes, ANRIC Enterprises, Inc., Toronto, ON, CanadaSESSION 1.2S (MF-29-2)Monday, July 15, 10:30 am – 12:15 pm, Level 0, Foyer La SeineNDE DEMONSTRATION FORUM—IISponsored by the PVP Senate, Materials & Fabrication TechnicalCommittee, and the ASME NDE DivisionDeveloped by: C. E. Jaske, Det Norske Veritas (USA), Inc., Dublin, OH, USA;

J. Todd, Penn State University, University Park, USA

no textBlock 1.3: Monday, July 15 (2:00 pm – 3:45 pm)

no textSESSION 1.3A (CS-18-1)Monday, July 15, 2:00 pm – 3:45 pm, Level -1, Ella Fitzgerald BPLASTIC PIPE APPLICATIONS AND DEVELOPMENTS IN CODES ANDSTANDARDSSymposium of Plastics and Composites—Co-Sponsored by Design &Analysis, Materials & Fabrication, High Pressure Technology, and Codes &Standards Technical CommitteesDeveloped by: P. Rush, MPR Associates, Alexandria, VA, USA; D.-J. Shim, S.

Kalyanam, Engineering Mechanics Corporation of Columbus,Columbus, OH, USA

Chair: P. Rush, MPR Associates, Alexandria, VA, USACo-Chair P. Krishnaswamy, Engineering Mechanics Corporation of

Columbus, Columbus, OH, USAPVP2013-97172: STUDY ON THE FAILURE MODE OF CRACKINGTHROUGH THE FITTING OF ELECTROFUSION JOINTJ. Zheng, X. Luo, J. Shi, S. Zhong, Zhejiang University, Hangzhou, Zhejiang,ChinaPVP2013-97425: APPLICATION AND EXPERIENCE FEEDBACK OF ASMECODE CASE N-155-2 FOR RTR PIPING IN NUCLEAR PLANTSN. d’Udekem, J. Grisel, Tractebel Engineering, Brussels, Belgium; P. Art,Electrabel, Tihange, BelgiumPVP2013-97492: THE USE OF HDPE IN NUCLEAR INDUSTRY (PresentationOnly)R. Bianchi, Boulting Group Ltd., Warrington, United Kingdom; C. Stockton, GHALivigunn, Frodsham, United KingdomPVP2013-97205: ULTRASONIC TECHNIQUE FOR TESTING COLDWELDING OF POLYETHYLENE BUTT FUSION JOINTW. Guo, H. Xu, Z. Liu, Zhejiang Provincial Special Equipment Inspection andResearch Institute, Hangzhou, Zhejiang, China; J. Shi, Zhejiang University,Hangzhou, Zhejiang, ChinaPVP2013-98174: MEASURING AND CONTROLLING THE FAILURE MODESOF HDPE PIPES FOR ENHANCED PERFORMANCE (Presentation Only)P. BelloirSESSION 1.3B (SPC-1-1)Monday, July 15, 2:00 pm – 3:45 pm, Level -1, Ella Fitzgerald ASTUDENT PAPER COMPETITION I—BS/MS LEVELDeveloped by: Y. W. Kwon, Naval Postgraduate School, Monterey, CA, USA;

R. S. Hafner, Lawrence Livermore National Laboratory,Livermore, CA, USA

Chair: N. O’Dowd, University of Limerick, Limerick, IrelandCo-Chair H. Qian, Alstom Power, Avon, USAPVP2013-97251: CONSTITUTIVE MODELING OF HIGH TEMPERATUREUNIAXIAL CREEP-FATIGUE AND CREEP-RATCHETING RESPONSES OF

18

ALLOY 617P. G. Pritchard, North Carolina State University, Raleigh, NC, USA; L. Carroll,Idaho National Laboratory, Idaho Falls, ID, USA; T. Hassan, North Carolina StateUniversity, Raleigh, NC, USAPVP2013-97264: PLASTIC COLLAPSE STRENGTH OFCIRCUMFERENTIALLY MULTIPLE NOTCHED STAINLESS PIPINGSUBJECTED TO COMBINED AXIAL TENSION AND BENDINGS. Yanagihara, M. Matsubara, R. Suzuki, Gunma University, Kiryu, JapanPVP2013-98102: LIMIT LOADS FOR CIRCUMFERENTIALLY CRACKEDPIPES UNDER COMBINED BENDING AND TORSION WITH TENSIONH.-W. Ryu, J.-J. Han, Y. J. Kim, Korea University, Seoul, Korea (Republic)PVP2013-97900: DEVELOPMENT OF A PROTOCOL TO DETERMINECOMPRESSED NON-ASBESTOS GASKETS MINIMUM OPERATINGSTRESSA. C. Silva, L. Xavier, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil;G. Rodrigues, Souza Marques University, Rio de Janeiro, BrazilSESSION 1.3C (CS-3-1)Monday, July 15, 2:00 pm – 3:45 pm, Level -1, Miles Davis CENVIRONMENTAL FATIGUE ISSUES—ISponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: H. Mehta, GE-Hitachi Nuclear Energy, Wilmington, NC, USA; S.

S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; G.Stevens, U.S. Nuclear Regulatory Commission, Washington,DC, USA

Chair: M. Kamaya, INSS, Mikata-gukn, JapanCo-Chair: T. Gilman, Structural Integrity Associates, Inc., San Jose, CA,

USAPVP2013-97397: CONSIDERATION OF ENVIRONMENTALLY ASSISTEDFATIGUE IN AUSTENITIC STAINLESS STEEL—APPLICABILITY ANDCOMPARISON OF EXISTING NUMERICAL PROCEDURESS. H. Reese, E.ON Kernkraft GmbH, Hannover, Germany; J. Seichter,Siempelkamp Prüf- und Gutachter-Gesellschaft mbH, Dresden, Germany; D.Klucke, E.ON Kernkraft GmbH, Hannover, GermanyPVP2013-97157: EFFECT OF SURFACE FINISH AND LOADING CONDI-TIONS ON THE LOW CYCLE FATIGUE LIFE OF STAINLESS STEEL WELD-ED PIPING IN PWR ENVIRONMENTY. Fukuta, Y. Nomura, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; S. S.Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanPVP2013-97158: HIGH STRAIN RATE EFFECTS ON ENVIRONMENTASSISTED FATIGUE FOR AUSTENITIC STAINLESS STEELS IN PWRENVIRONMENTY. Fukuta, Y. Nomura, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; T.Saruwatari, Kyushu Electric Power Company, Inc., Fukuoka, Japan; S. S. Asada,Mitsubishi Heavy Industries, Ltd., Kobe, JapanPVP2013-97203: FRENCH METHODOLOGY PROPOSAL FOR ENVIRON-MENTALLY ASSISTED FATIGUE ASSESSMENTT. Metais, EDF, Villeurbanne, France; S. Courtin, AREVA NP SAS, Paris, France;L. De Baglion, AREVA NP SAS, Paris, France; P. Genette, EDF/SEPTEN,Villeurbanne, France; A. Lefrancois, AREVA NP SAS, Courbevoie, France; J.-P.Massoud, EDF/SEPTEN, Villeurbanne, FrancePVP2013-98060: ENVIRONMENTALLY-ASSISTED FATIGUE MANAGEMENTOF PWR PRESSURIZER USING NONLINEAR STRAIN-BASED ANALYSIST. Gilman, Structural Integrity Associates, Inc., San Jose, CA, USA; M. Hoehn,Ameren Missouri - Callaway Energy Center, Fulton, MO, USA; J. Hiremagalur,S. Rodamaker, J. Gillis, W. Weitze, Structural Integrity Associates, Inc., SanJose, CA, USASESSION 1.3D (FSI-1-2)Monday, July 15, 2:00 pm – 3:45 pm, Level -1, Miles Davis BFLUID FLOW AND HEAT TRANSFER—IIDeveloped by: A. Tijsseling, TU Eindhoven, Eindhoven, Netherlands; J. C. Jo,

KINS, Daejon, Korea (Republic)Chair: A. Tijsseling, TU Eindhoven, Eindhoven, NetherlandsCo-Chair J. C. Jo, KINS, Daejon, Korea (Republic)PVP2013-97123: ANALYTICAL STUDY OF TWO-PHASE FLOW INSTABILITY

IN A NATURAL CIRCULATION PWR AUXILIARY FEEDWATER SYSTEMJ. C. Jo, KINS, Daejon, Korea (Republic); F. J. Moody, GE Retiree, Turlock, CA,USA; K. S. Do, KINS, Daejon, Korea (Republic)PVP2013-97266: ANEURYSM NO-LINEAR UNSTEADY DYNAMIC:MATHEMATICAL MODELINGM. Hamadiche, LMFA/Université de Claude Bernard, Villeurbanne, FrancePVP2013-97833: NUMERICAL SIMULATION OF THERMALSTRATIFICATION IN THE UPPER PLENUM OF FAST REACTORS. Choi, T.-H. Lee, Korea Atomic Energy Research Institute, Daejeon, Yuseong,Korea (Republic)SESSION 1.3E (MF-4-2)Monday, July 15, 2:00 pm – 3:45 pm, Level -1, Miles Davis AROUND ROBIN ACTIVITIES IN RESIDUAL STRESS DETERMINATIONDeveloped by: B. Pellereau, Rolls-Royce Group, PLC, Derby, United KingdomChair: B. Pellereau, Rolls-Royce Group, PLC, Derby, United KingdomCo-Chair M. C. Smith, EDF Energy Nuclear Generation Ltd., Gloucester,

United KingdomPVP2013-97475: AREVA METHODOLOGY FOR NUMERICAL WELDINGSIMULATION VALIDATION: THE DISSIMILAR MATERIAL WELD CASEP. Gilles, S. Courtin, V. Robin, M. Yescas, Areva NP, Paris, FrancePVP2013-98033: SIMPLE BENCHMARK PROBLEMS FOR FINITE ELEMENTWELD RESIDUAL STRESS SIMULATIONM. C. Smith, EDF Energy Nuclear Generation Ltd., Gloucester, United Kingdom;S. Bate, AMEC, Warrington, Merseyside, United Kingdom; P. J. Bouchard, TheOpen University, Milton Keynes, United KingdomPVP2013-98039: ROUND ROBIN PREDICTION OF RESIDUAL STRESSES INTHE EDGE-WELDED BEAM R6 VALIDATION BENCHMARK PROBLEMC. Aird, M. C. Smith, EDF Energy Nuclear Generation Ltd., Gloucester, UnitedKingdom; P. Kapadia, Imperial College London, London, United Kingdom; K. A.Venkata, University of Bristol, Bristol, United Kingdom; O. Muransky, AustralianNuclear Science and Technology Organisation, Kirrawee DC, NSW, AustraliaPVP2013-97585: RESIDUAL STRESS ANALYSIS OF IN-SERVICE WELDEDGAS PIPELINESF. Koch, Technische Universität Bergakademie Freiberg, Freiberg, Germany; M.Enderlein, EWP Ingenieur GmbH, Dresden, Germany; P. Hübner, HochschuleMittweida, University of Applied Sciences, Mittweida, Germany; M. Kuna,Technische Universität Bergakademie Freiberg, Freiberg, GermanySESSION 1.3F (DA-9-2)Monday, July 15, 2:00 pm – 3:45 pm, Level -1, Louis Armstrong A+BEQUIPMENT DYNAMICSDeveloped by: M. Porter, Porter McGuffle Inc., Lawrence, KS, USAChair: A. Dweib, Worley Parsons, Atyrau, KazakhstanCo-Chair R. Baliga, ADVENT Engineering Services, Inc., San Ramon,

CA, USAPVP2013-97487: RRISK EVALUATION METHOD OF ACOUSTICALLYINDUCED VIBRATION (AIV) BASED ON RANDOM VIBRATION THEORYM. Nishiguchi, H. Izuchi, Chiyoda Corporation, Yokohama, Kanagawa, Japan; G.Minorikawa, Hosei University, Tokyo, JapanPVP2013-98034: CRITERIA FOR HIGH FREQUENCY CUTOFF BASED ONADVANCED BOILING WATER REACTOR (ABWR) HYDRODYNAMIC LOADSE. Ulku, C. Ozgur, M. Ozkan, N. Vaidya, P. C. Rizzo Associates, Inc., Pittsburgh,PA, USA; H. M. Srivastava, Westinghouse Electric Company, San Jose, CA,USA; T. Tanoue, Toshiba Corporation, Yokohama, JapanPVP2013-98073: LOAD DEFINITION ON BWR STEAM DRYER DUE TOTURBINE STOP VALVE CLOSERA. Faal-Amiri, H. M. Srivastava, Westinghouse Electric Company, San Jose, CA,USA; F. J. Moody, GE Retiree, Turlock, CA, USASESSION 1.3G (DA-1-2)Monday, July 15, 2:00 pm – 3:45 pm, Level -1, Louis Armstrong C+DDESIGN AND ANALYSIS OF PRESSURE VESSELS AND COMPONENTS IIDeveloped by: M. Zhao, Chevron, Houston, TX, USA; C. Rodery, BP

Corporation North America, Inc., League City, TX, USA; A.Avery, Northwest Redwater Partnership, Calgary, AB, Canada

19

Chair: T. G. Seipp, Becht Engineering Canada, Ltd., Calgary, AB,Canada

Co-Chair: A. Avery, Northwest Redwater Partnership, Calgary, AB,Canada

PVP2013-97915: EXPERIMENTAL FATIGUE EVALUATION OF ALUMINUMBRAZED PLATE FIN HEAT EXCHANGERSR. Hölzl, R. Flueggen, The Linde Group, Pullach, Bavaria, GermanyPVP2013-97930: NUMERICAL ANALYTIC APPROACH TO A CALCULATIONOF A THERMAL STRESS STATE OF SHELL AND TUBE HEAT EXCHANG-ERSI. Laskin, RAN GROUP, Moscow, Russia; B. Volfson, JSC VNIINEFTEMASH,Moscow, RussiaPVP2013-97723: RESEARCH AND DEVELOPMENT OF THE RUBBER O-RING SEALING DEVICE FOR HIGH PRESSURE VESSELSF. Zhou, Z. Chen, H. Fan, Zhejiang University, Hangzhou, ChinaPVP2013-97745: STRESS ANALYSIS ON NEW MULTILAYER CYLINDERUSING THIN INNER SHELL AND CROSS-HELICALLY WOUNDINTERLOCKING SHAPED-STEEL RIBBON FOR PRESSURE VESSELSP. Chen, S. Chen, Beijing University of Chemical Technology, Beijing, ChinaSESSION 1.3H (HT-5-1)Monday, July 15, 2:00 pm – 3:45 pm, Level 0, Pont De Sully A+BDESIGN AND ANALYSIS OF HIGH PRESSURE COMPRESSORS AND THEIRCYLINDER VALVESDeveloped by: K. Simpson, ExxonMobil Chemical Company, Baton Rouge, LA,

USA; E. Giacomelli, Dott. Ing. Mario Cozzani Srl, Montespertoli,Firenze, Italy

Chair: K. Simpson, ExxonMobil Chemical Company, Baton Rouge, LA,USA

Co-Chair: E. Giacomelli, Dott. Ing. Mario Cozzani Srl, Montespertoli,Firenze, Italy

PVP2013-97312: DESIGN AND PERFORMANCE OF VALVES FORCOMPRESSORS FOR LDPE PLANTSE. Giacomelli, Dott. Ing. Mario Cozzani Srl, Montespertoli, Firenze, Italy; M.Schiavone, F. Manfrone, A. Raggi, Dott. Ing. Mario Cozzani Srl, Arcola, ItalyPVP2013-97314: CHALLENGING HYPERS PERFORMANCEE. Giacomelli, Dott. Ing. Mario Cozzani Srl, Montespertoli, Firenze, ItalyPVP2013-97675: A MULTI-PHASE CFD STUDY OF A LIQUID SLUG INGES-TION IN A RECIPROCATING COMPRESSORR. Traversari, B. Bettini, C. Carcasci, A. Fusi, Compression Service Technology,Florence, ItalyPVP2013-97926: IMPROVING THE TRADITIONAL RCA METHODOLOGY TODESIGN A MOST EFFICIENT AND RELIABLE VALVE FOR LDPE HYPER-COMPRESSORS LEVERAGING EXPERIMENTAL DATA FROM TEST BENCHSIMULATION. A REAL CASE STUDYC. Maggi, R. Bagagli, L. Tognarelli, GE Oil & Gas - Nuovo Pignone, Florence,Italy; J. Wojnar, Warsaw Institute of Aviation, Warsaw, PolandPVP2013-98158: HOW FINITE ELEMENT CALCULATIONS IMPROVE HYPERCOMPRESSOR PERFORMANCE AND LIFETIMEN. Retz, A. Allenspach, Burckhardt Compression AG, Winterthur, Zurich,SwitzerlandSESSION 1.3I (DA-14-2)Monday, July 15, 2:00 pm – 3:45 pm, Level 0, Pont De Arts AFRACTURE 2Developed by: D. Moinereau, Electricite de France, Moret sur Loing, FranceChair: S. Krishnamurthy, UOP, Des Plaines, IL, USACo-Chair J. Taagepera, Chevron ETC, Richmond, CA, USAPVP2013-97410: COMPARISON OF FLAW DRIVING FORCE ESTIMATES INSIMULATED WELD RESIDUAL STRESS FIELDSD. J. Dewees, The Equity Engineering Group, Inc., Shaker Heights, OH, USA;R. H. Dodds Jr., The University of Illinois at Urbana-Champaign, Urbana, IL, USAPVP2013-97561: THE BRITTLE STRENGTH ASSESSMENT OF WWER-1000REACTOR PRESSURE VESSEL NOZZLE WITH CLADDINGA. Oryniak, National Technical University of Ukraine “Kyiv PolytechnicalInstitute,” Kiev, Ukraine; S. Radchenko, I. Orynyak, IPP-Centre Ltd., Kiev,Ukraine

PVP2013-97670: STRESS INTENSITY FACTORS FOR AXIAL CRACKS INPRESSURIZED CYLINDRICAL ELEMENTS USING THE BOUNDARYELEMENT METHODM. Gonzalez, Universidad Simon Bolivar, Caracas, Miranda, Venezuela; M.Martinez, Central University of Venezuela, Caracas, Miranda, VenezuelaPVP2013-97697: DETERMINATION OF THE TRANSITION TEMPERATURESCATTER USING THE CHARPY DATA SCATTERM. Zarazovskii, I. Orynyak, A. Bogdan, IPP-Centre Ltd., Kyiv, UkraineSESSION 1.3J (SE-2-2)Monday, July 15, 2:00 pm – 3:45 pm, Level 0, Pont De Arts BSTRUCTURAL DYNAMICS—LINEAR AND NONLINEARDeveloped by: K. Fujita, Osaka City University, Osaka-prefecture, JapanChair: K. Fujita, Osaka City University, Osaka-prefecture, JapanCo-Chair T. Asami, University of Hyogo, Himeji, JapanPVP2013-97044: TIME INTEGRATION METHOD WITH STRUCTURE-DEPENDENT DIFFERENCE EQUATIONSS.-Y. Chang, National Taipei University of Technology, Taipei, Taiwan; C.-L.Huang, Fu Jen Catholic University, New Taipei City, TaiwanPVP2013-97168: DEVELOPMENT OF SEISMIC DESIGN METHOD FORFREE STANDING RACKA. Iwasaki, Y. Nekomoto, H. Morita, K. Taniguchi, D. Okuno, T. Matsuoka,Mitsubishi Heavy Industries, Ltd., Hyogo-pref, Japan; N. Chigusa, The KansaiElectric Power Co., Inc., Tokyo, JapanPVP2013-97668: DYNAMIC MODELING OF A BWR CONTROL RODINSERTION SYSTEM FOR SEISMIC ANALYSIS AND ITS EXPERIMENTALVALIDATIONY. Koide, Y. Goto, Hitachi, Ltd., Hitachinaka, Ibaraki, Japan; Y. Sato, H. Ishigaki,T. Takahashi, T. Shiraki, Hitachi-GE Nuclear Energy, Ltd., Hitachi-shi, Ibaraki,JapanPVP2013-97488: SEISMIC ASSESSMENT OF MECHANICAL MEMBERSFOCUSED ON ENERGYH. Seki, S. Fujita, Tokyo Denki University, Tokyo, Japan; K. Minagawa, SaitamaInstitute of Technology, Saitama, JapanSESSION 1.3K (OAC-8-2)Monday, July 15, 2:00 pm – 3:45 pm, Level 0, Pont De Arts CPLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENT IIDeveloped by: G. Young, Entergy Nuclear, Russellville, AR, USA; G. Bezdikian,

Georges Bezdikian Consulting, Le Vesinet, FranceChair: G. Bezdikian, Georges Bezdikian Consulting, Le Vesinet,

FranceCo-Chair G. Young, Entergy Nuclear, Russellville, AR, USAPVP2013-97039: COMPARISON OF RADIATION EMBRITTLEMENTPREDICTION MODELS TO HIGH FLUENCE U.S. POWER REACTORSURVEILLANCE DATAB. Hall, Westinghouse Electric Company, Pittsburgh, PA, USA; W. Server, ATIConsulting, Black Mountain, NC, USA; B. Rosier, Westinghouse, CranberryTownship, PA, USA; T. Hardin, Electric Power Research Institute, Palo Alto, CA,USAPVP2013-97291: NUCLEAR REACTOR PRESSURE VESSEL INTEGRITYASSESSMENT: ENHANCEMENT PROVIDED BY 3D MODELING FLAWSTABILITY CALCULATIONSA. Arrieta-Ruiz, E. Meister, H. Churier, EDF-SEPTEN, Villeurbanne, FrancePVP2013-97533: AGING MANAGEMENT OF FRENCH PWR STEAMGENERATORS USING STATISTICAL MODELINGA. Chaudhary, C. Mathon, Electricité de France, Villeurbanne, France; N. Gay,Electricité de France, Saint-Denis, FrancePVP2013-97643: EFFECT OF THERMAL AGEING ON PROPERTIES OFPRESSURE VESSEL LOW ALLOY STEELSP. Joly, F. Roch, AREVA NP, Paris, France; C. Primault, AREVA NP, Chalon surSaone, FranceSESSION 1.3L (CT-2-1)Monday, July 15, 2:00 pm – 3:45 pm, Level 2, St. MichelDESIGN AND ANALYSIS OF PRESSURE SEALED JOINTSDeveloped by: M. Schaaf, AMTEC Services GmbH, Lauffen, Germany

20

Chair: M. Schaaf, AMTEC Services GmbH, Lauffen, GermanyCo-Chair H. Lejeune, Cetim, Nantes 44000, FrancePVP2013-97173: SEALING PERFORMANCE EVALUATION IN BOLTEDFLANGE CONNECTIONS WITH RING JOINT GASKET SUBJECTED TOINTERNAL PRESSUREK. Kondo, Shinko Plantech Co Ltd., Yokohama, Japan; S. Tsubaki, T. Sawa,Hiroshima University, Higashi-hiroshima City, Japan; K. Sato, Nippon ValquaIndustries, Ltd., Gojo, Nara, Japan; Y. Omiya, Hiroshima University, Higashi-hiroshima, Hiroshima, JapanPVP2013-97187: AN ALTERNATIVE USE FOR AN API 6A TYPE RX RINGTYPE JOINT FLANGE (Presentation Only)M. Shelton, Jacobs Engineering Group, Houston, TX, USA; E. Coppock, LimaRefining Company, Bowling Green, OH, USA; J. Prucz, West Virginia University,Morgantown, WV, USAPVP2013-97941: IMPROVED GASKET TESTINGM. Schaaf, AMTEC Services GmbH, Lauffen, GermanyPVP2013-97036: CHARACTERISTICS THAT INFLUENCE THE SEALINGBEHAVIOR OF SPIRAL WOUND GASKETSJ. Veiga, N. Kavanagh, G. Monteiro, Teadit Industria e Comercio Ltda, Rio deJaneiro, BrazilPVP2013-97729: DEFLECTION OF GASKETS AND ITS EFFECT ONTIGHTNESS OF FLANGED CONNECTIONS IN LONG TERMT. Kobayashi, Numazu College of Technology, Numazu, Shizuoka, Japan; K.Nishiura, Mitsubishi Chemical Corporation, Kurashiki, Okayama, Japan; M.Hiratsuka, NICHIAS Corporation, Minato-ku, Tokyo, Japan; K. Itoi, NICHIASCorporation, Hamamatsu, Shizuoka, JapanSESSION 1.3M (CS-9-1)Monday, July 15, 2:00 pm – 3:45 pm, Level 2, St. Germain Des Pres A+BASME CODE SECTION XI ACTIVITIESSymposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: R. Crane, ASME, New York, NY, USA; D. A. Scarth, Kinectrics

Inc., Mississauga, ON, Canada; R. Cipolla, Intertek APTECH,Sunnyvale, CA, USA

Chair: R. Crane, ASME, New York, NY, USACo-Chair: R. Cipolla, Intertek APTECH, Sunnyvale, CA, USAPVP2013-97210: DIRECT USE OF THE FRACTURE TOUGHNESS MASTERCURVE IN ASME CODE, SECTION XI, APPLICATIONSW. Server, ATI Consulting, Black Mountain, NC, USA; R. Cipolla, IntertekAPTECH, Sunnyvale, CA, USAPVP2013-97522: CLOSED-FORM CALCULATION OF STRESS INTENSITYFACTOR FOR AN AXIAL ID SURFACE FLAW IN CYLINDER SUBJECTED TOWELD RESIDUAL STRESSESD. A. Scarth, Kinectrics Inc., Mississauga, ON, Canada; S. Xu, Kinectrics,Toronto, ON, CanadaPVP2013-97734: STRESS INTENSITY FACTOR COEFFICIENTS FORCIRCUMFERENTIAL ID SURFACE FLAWS IN CYLINDERS FOR APPENDIXA OF ASME SECTION XID. Lee, Babcock & Wilcox, Barberton, OH, USA; R. Cipolla, Intertek APTECH,Sunnyvale, CA, USAPVP2013-97056: DESIGN MARGINS FOR INTEGRITY ASSESSMENT OFBURIED METALLIC PIPEG. Antaki, Becht Engineering Co., Inc., Aiken, SC, USA; C. Becht 5th, BechtEngineering Co., Inc., Liberty Corner, NJ, USA; M. Shipley, Becht Engineering,Richland, WA, USAPVP2013-97465: APPLICATION OF STRESS INTENSITY FACTORS FORDEEP SURFACE CRACKS TO CRACK GROWTH EVALUATIONF. Iwamatsu, K. Miyazaki, Hitachi Research Lab, Hitachi Ltd., Ibaraki-ken, Japan;H. Miyata, Hitachi-GE Nuclear Energy, Ltd., Ibaraki, Japan; H. Yuya, ChubuElectric Power Co., Inc., Shizuoka, JapanSESSION 1.3N (FSI-2-2)Monday, July 15, 2:00 pm – 3:45 pm, Level 3, Le Parc Montsouris APIPING VIBRATIONS AND ACOUSTICS I

Developed by: N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,Canada

Chair: P. Moussou, Electricite de France, Clamart, FranceCo-Chair: H. Goyder, Cranfield University, Shrivenham, United KingdomPVP2013-97032: FACILITY AND PIPELINE DYNAMIC BEHAVIOR—IMPORTANCE OF TRANSIENT AND STEADY-STATE ANALYSESR. W. Motriuk, Arcus Solutions Inc., Calgary, CanadaPVP2013-97103: EXPERIMENTAL INVESTIGATION OF FLOW-ACOUSTICCOUPLING IN A DEEP AXISYMMETRIC CAVITYP. Oshkai, O. Barannyk, University of Victoria, Victoria, BC, CanadaPVP2013-97973: SINGING MITIGATION IN CORRUGATED TUBES WITHLIQUID INJECTIONS. Belfroid, J. Golliard, O. Vijlbrief, TNO, Delft, NetherlandsPVP2013-97020: NUMERICAL AND EXPERIMENTAL INVESTIGATION OFFLOW-ACOUSTIC RESONANCE OF SIDE-BY-SIDE CYLINDERS IN A DUCTA. Mohany, D. Arthurs, University of Ontario Institute of Technology (UOIT),Oshawa, ON, Canada; M. Bolduc, McMaster University, Hamilton, ON, Canada;M. Hassan, University of Guelph, Guelph, ON, Canada; S. R. Ziada, McMasterUniversity, Hamilton, ON, CanadaSESSION 1.3O (MF-18-2)Monday, July 15, 2:00 pm – 3:45 pm, Level 3, Le Parc Montsouris BIMPACT OF MICROSTRUCTURE ON FRACTUREDeveloped by: M. Kerr, Knolls Atomic Power Laboratory, Schenectady, NY,

USA; F. Hosseinzadeh, The Open University, Milton Keynes,United Kingdom

Chair: F. Hosseinzadeh, The Open University, Milton Keynes, UnitedKingdom

Co-Chair: M. Kerr, Knolls Atomic Power Laboratory, Schenectady, NY,USA

PVP2013-97659: CREEP STRENGTH OF DISSIMILAR WELD USING HIGH B-9CR STEEL FOR A-USC BOILERM. Tabuchi, H. Hongo, F. Abe, National Institute for Materials Science, Tsukuba,JapanPVP2013-97996: HIGH TEMPERATURE, LOW CYCLE FATIGUECHARACTERISATION OF P91 WELD AND HEAT AFFECTED ZONEMATERIALT. P. Farragher, NUI Galway, Galway, Ireland; S. Scully, ESB EnergyInternational, Dublin, Ireland; N. O’Dowd, University of Limerick, Limerick,Ireland; S. Leen, NUI Galway, Galway, IrelandPVP2013-98100: MISMATCH EFFECT OF CREEP PROPERTIES ONSTEADY-STATE STRESSES FOR WELDED STRAIGHT PIPES:QUANTIFICATION AND APPLICATIONJ.-J. Han, S.-H. Kim, Y. J. Kim, Korea University, Seoul, Korea (Republic); K. M.Nikbin, Imperial College London, London, United Kingdom; D. W. Dean, EDFEnergy, Gloucester, Gloucestershire, United KingdomPVP2013-98127: MISMATCH LIMIT LOADS OF CIRCUMFERENTIALCRACKED PIPES WITH V-GROOVE WELDSS.-H. Kim, J.-J. Han, Y. J. Kim, Korea University, Seoul, Korea (Republic)SESSION 1.3Q (TW-1-7)Monday, July 15, 2:00 pm – 3:45 pm, Level 2, Les Invalides A+BAPPLICATION OF FITNESS-FOR-SERVICE CODES TO NUCLEARINSTALLATIONS—PART IDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: B. Bezensek, Hunting Energy Services, Ltd; C. Faidy, ED-

SEPTEN; P. Budden, EDF Energy; and R. Cipolla, Intertek-APTECH

SESSION 1.3S (MF-29-3)Monday, July 15, 2:00 pm – 3:45 pm, Level 0, Foyer La SeineNDE DEMONSTRATION FORUM—IIISponsored by the PVP Senate, Materials & Fabrication TechnicalCommittee, and the ASME NDE DivisionDeveloped by: C. E. Jaske, Det Norske Veritas (USA), Inc., Dublin, OH, USA;

J. Todd, Penn State University, University Park, USA

21

no textBlock 1.4: Monday, July 15 (4:00 pm – 5:45 pm)

no textSESSION 1.4A (DA-6-1)Monday, July 15, 4:00 pm – 5:45 pm, Level -1, Ella Fitzgerald BCOMPOSITE MATERIALS AND STRUCTURESSymposium of Plastics and Composites—Co-Sponsored by Design &Analysis, Materials & Fabrication, High Pressure Technology, and Codes &Standards Technical CommitteesDeveloped by: P. Mertiny, University of Alberta, Edmonton, Canada; M. B.

Ruggles-Wrenn, Air Force Institute of Technology, WPAFB, OH,USA

Chair: P. Mertiny, University of Alberta, Edmonton, CanadaCo-Chair: M. B. Ruggles-Wrenn, Air Force Institute of Technology,

WPAFB, OH, USAPVP2013-97179: OPTIMIZATION IN POLYMER COMPOSITE PIPING DESIGNP. Mertiny, University of Alberta, Edmonton, Canada; H. Baier, TechnicalUniversity Munich, Garching, GermanyPVP2013-97896: UNCERTAINTY ANALYSIS OF A CROSS-PLY COMPOSITECYLINDER SUBJECT TO EXTERNAL PRESSURE BY CONVEX MODELINGS. Radebe, Durban University of Technology, Durban, South Africa; S. Adali,University of KwaZulu-Natal, Durban, South AfricaPVP2013-97984: NUMERICAL AND EXPERIMENTAL TESTING OF COM-POSITE RINGS FOR RECIPROCATING COMPRESSOR VALVESC. Annicchiarico, University of Florence, Florence, Italy; A. Babbini, GE Oil &Gas, Florence, Italy; R. Capitani, Università degli Studi di Firenze, Florence,Italy; P. Tozzi, GE Oil & Gas, Florence, ItalySESSION 1.4B (SPC-1-2)Monday, July 15, 4:00 pm – 5:45 pm, Level -1, Ella Fitzgerald ASTUDENT PAPER COMPETITION II—BS/MS LEVELDeveloped by: Y. W. Kwon, Naval Postgraduate School, Monterey, CA, USA;

R. S. Hafner, Lawrence Livermore National Laboratory,Livermore, CA, USA

Chair: H. Qian, Alstom Power, Avon, USACo-Chair N. O’Dowd, University of Limerick, Limerick, IrelandPVP2013-97211: EVALUATION OF DUCTILE TEARING OF X-80 PIPELINEGIRTH WELDS USING SE(T), SE(B) AND C(T) FRACTURE SPECIMENSL. L. S. Mathias, C. Ruggieri, D. F. B. Sarzosa, University of Sao Paulo, SaoPaulo, BrazilPVP2013-97768: A METHOD FOR PREDICTION OF FORMING STRAIN FORCOLD STAMPING FORMED HEAD MADE OF S30408 AUSTENITIC STAIN-LESS STEELX. Zhu, C. Miao, L. Ma, Zhejiang University, Hangzhou, ChinaPVP2013-97407: STRUCTURAL ASSESSMENT OF REACTOR PRESSUREVESSEL UNDER CORE MELTING CONDITIONSS. H. Kim, Kyung Hee University, Youngin-si, Korea (Republic); Y. Chang, KyungHee University, Kyunggi-do, Korea (Republic)PVP2013-97839: IMPROVEMENT IN FATIGUE LIMIT BY SHOT PEENINGFOR HIGH STRENGTH STEEL CONTAINING CRACK-LIKE SURFACEDEFECT: INFLUENCE OF SURFACE CRACK ASPECT RATIOM. Nakagawa, K. Takahashi, Toshio Osada, Yokohama National University,Yokohama, JapanSESSION 1.4C (CS-3-2)Monday, July 15, 4:00 pm – 5:45 pm, Level -1, Miles Davis CENVIRONMENTAL FATIGUE ISSUES—IISponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: S. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; G.

Stevens, U.S. Nuclear Regulatory Commission, Washington,DC, USA; H. Mehta, GE-Hitachi Nuclear Energy, Wilmington,NC, USA

Chair: L. De Baglion, AREVA NP SAS, Paris, FranceCo-Chair J. Zheng, Zhejiang University, Hangzhou, Zhejiang, China

PVP2013-97270: CORROSION FATIGUE EVALUATION OF AUSTENITICSTAINLESS STEELS: THE NEW PROPOSAL TO THE CZECH STANDARD INTHE AREA OF NUCLEAR POWER PLANT TYPE WWERL. Vlcek, Institute of Applied Mechanics Brno, Ltd., Brno, Czech RepublicPVP2013-97370: CRACK BEHAVIOUR OF FERRITIC PRESSURE VESSELSSTEELS IN OXYGENATED HIGH TEMPERATURE WATER UNDER TRAN-SIENT LOADINGSK.-H. Herter, T. Weissenberg, X. Schuler, MPA University Stuttgart, Stuttgart,Baden-Württemberg, GermanyPVP2013-97767: PLAN AND STATUS OF DEVELOPMENT OF DESIGNFATIGUE CURVES (PHASE 1)S. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; A. Hirano, Hitachi-GE Nuclear Energy, Ltd., Hitachi, Ibaragi, Japan; M. Itatani, Toshiba Corp.,Yokohama, Japan; M. Yasuda, T. Sera, Kansai Electric Power Co., Inc., Osaka,Japan; H. Kobayashi, Yokohama National University, Yokohama, JapanPVP2013-97851: A FLAW TOLERANCE CONCEPT FOR PLANT MAINTE-NANCE USING VIRTUAL FATIGUE CRACK GROWTH CURVEM. Kamaya, INSS, Mikata-gukn, Japan; T. Nakamura, Osaka University, Osaka,JapanSESSION 1.4D (FSI-1-3)Monday, July 15, 4:00 pm – 5:45 pm, Level -1, Miles Davis BFLUID TRANSIENTSDeveloped by: C. S. Martin, Georgia Tech, South Dennis, GA, USA; F. J.

Moody, GE Retiree, Turlock, CA, USAChair: C. S. Martin, Georgia Tech, South Dennis, GA, USACo-Chair: F. J. Moody, GE Retiree, Turlock, CA, USAPVP2013-97424: WATERHAMMER IN A HORIZONTAL STEEL PIPEINDUCED BY SLUG FORMATION AND CONDENSATIONC. S. Martin, Georgia Tech, South Dennis, GA, USAPVP2013-97540: FLUID TRANSIENT ANALYSIS FOR SAFETY VALVE VENTSTACK USING S-RELAP5 CODEJ.-S. Hsieh, Areva Inc., Marlborough, MA, USA; P. Brocheny, Areva Inc.,Lynchburg, VA, USAPVP2013-97878: ANALYSIS OF A FEED WATER DISTRIBUTION RING FORA WATER HAMMER LOAD FOLLOWING A PIPE BREAKA. Olsson, M. Möller, AREVA NP Uddcomb AB, Helsingborg, SwedenPVP2013-98148: CONDENSATION INDUCED WATERHAMMER IN DISTRICTSTEAM DISTRIBUTION SYSTEMS. Sinha, R. S. Vecchio, T. C. Esselman, P. M. Bruck, G. Zysk, Lucius Pitkin, Inc.,New York, NY, USA; D. Somrah, Consolidated Edison Company of New York,New Hyde Park, NY, USAPVP2013-97958: INFLUENCE OF PUMP-CIRCUIT COUPLING ONACOUSTIC WAVES IN PIPELINES AND PUMP VELOCITY FIELDSJ. Keller, J. Parrondo, E. Blanco, R. Barrio, C. Suárez, University of Oviedo,Gijón, SpainSESSION 1.4E (MF-4-3)Monday, July 15, 4:00 pm – 5:45 pm, Level -1, Miles Davis ARESIDUAL STRESS MEASUREMENTS USING MATURE TECHNIQUESDeveloped by: R. Dennis, Frazer-Nash Consultancy, Bristol, United KingdomChair: E. Keim, AREVA NP GmbH, Erlangen, GermanyCo-Chair: R. Dennis, Frazer-Nash Consultancy, Bristol, United KingdomPVP2013-97184: ULTRASONIC MEASUREMENT OF RESIDUAL STRESSESIN WELDED SPECIMENS AND STRUCTURESY. Kudryavtsev, Structural Integrity Technologies Inc. (SINTEC), Markham, ON,CanadaPVP2013-97922: RESIDUAL STRESS MEASUREMENT OF A HIPPED BOND-ED VALVE SEAT USING THE CONTOUR METHODF. Hosseinzadeh, P. J. Bouchard, The Open University, Milton Keynes, UnitedKingdomPVP2013-97445: CHARACTERISATION OF RESIDUAL STRESS LEVELSRETAINED IN FRACTURE MECHANICS SPECIMENS MACHINED FROMNON STRESS-RELIEVED WELDSR. J. A. McCluskey, Rolls-Royce plc, Derby, United Kingdom; G. Zheng,University of Bristol, Bristol, United Kingdom; A. H. Sherry, University ofManchester, Manchester, United Kingdom; D. Smith, University of Bristol, Bristol,

22

United KingdomPVP2013-97073: RESIDUAL STRESS MEASUREMENTS AND MODELLINGFOR TEMPER BEAD QUALIFICATIONX. Ficquet, Veqter Ltd., Bristol, United Kingdom; V. Robin, AREVA NP SAS,Paris, France; E. Kingston, Veqter Limited, Bristol, United Kingdom; S. Courtin,AREVA NP SAS, Paris, France; M. Yescas, Areva, Paris, FrancePVP2013-97246: MULTIAXIAL RESIDUAL STRESS MAPPING IN A PWRDISSIMILAR METAL WELDM. R. Hill, M. Olson, University of California, Davis, CA, USASESSION 1.4F (CS-7-1)Monday, July 15, 4:00 pm – 5:45 pm, Level -1, Louis Armstrong A+BPANEL SESSION: RECENT DEVELOPMENTS IN ASME CODES ANDSTANDARDSDeveloped by: M. Rana, Praxair, Inc., Tonawanda, NY, USAChair: M. Rana, Praxair, Inc., Tonawanda, NY, USACo-Chair J. Henry, Structural Integrity Associates, Inc., Chattanooga, TN,

USAPanelists:M. Rana, Praxair, Inc., Tonawanda, NY, USAW. Sperko, Sperko Engineering Services, Inc., Greensboro, NC, USAR. Barnes, ANRIC Enterprises, Inc., Toronto, ON, CanadaJ. Henry, Structural Integrity Associates, Inc., Chattanooga, TN, USASESSION 1.4G (CS-12-1)Monday, July 15, 4:00 pm – 5:45 pm, Level -1, Louis Armstrong C+DRECENT EUROPEAN CODES AND STANDARDSDeveloped by: J. K. Sharples, AMEC Power and Process Europe, Warrington,

United Kingdom; R. Ainsworth, Manchester University,Manchester, United Kingdom; Morello Sperandio

Chair: J. K. Sharples, AMEC Power and Process Europe, Warrington,United Kingdom

Co-Chair S. E. Eren, TWI Ltd. (formerly Imperial College London),Cambridge, United Kingdom

PVP2013-97138: DERIVATION OF DESIGN FATIGUE CURVES FORAUSTENITIC STAINLESS STEEL GRADES 1.4541 AND 1.4550 WITHIN THEGERMAN NUCLEAR SAFETY STANDARD KTA 3201.2X. Schuler, MPA Stuttgart, Stuttgart, Baden-Württemberg, Germany; J. Rudolph,AREVA GmbH, Erlangen, Bavaria, Germany; K.-H. Herter, MPA UniversityStuttgart, Stuttgart, Baden-Württemberg, GermanyPVP2013-97513: VALIDATION OF PLASTIC COLLAPSE ASSESSMENTSUSING BS 7910:2013 AND R6 PROCEDURESS. E. Eren, TWI Ltd. (formerly Imperial College London), Cambridge, UnitedKingdom; T. London, Y. Yang, I. Hadley, TWI Ltd., Cambridge, United KingdomPVP2013-97672: RCC-MRx ADDENDA 2013: FEEDBACK OF APPLICATIONOF THE CODE DEVELOPMENTS OF RULES TO THE EVOLUTION OF PROJ-ECTS NEEDSC. Petesch, T. Lebarbé, CEA, Gif sur Yvette, France; D. Bonne, Areva NP, Lyon,France; F. de la Burgade, Areva TA, Saint Paul Lez Durance, France; M. Blat-Yrieix, EDF, Moret sur Loing, FrancePVP2013-98023: STANDARDS, SPECIFICATIONS, TEST METHODS ANDTECHNICAL REPORTS FOR GRP WATER, DRAINAGE AND SEWERAGEPIPINGA. T. Marques, Universidade do Porto, Porto, PortugalPVP2013-98012: GUIDELINES FOR MANAGING THE INTEGRITY OFBOLTED JOINTS—DEVELOPMENTS IN EUROPEAN STANDARDSR. Noble, 1tegrity, Sunderland, United KingdomSESSION 1.4H (HT-5-2)Monday, July 15, 4:00 pm – 5:45 pm, Level 0, Pont De Sully A+BHIGH PRESSURE COMPRESSOR PLUNGERS AND AUTOCLAVE REACTORCONNECTIONSDeveloped by: K. Simpson, ExxonMobil Chemical Company, Baton Rouge, LA,

USA; R. Wink, Uhde High Pressure Technologies GmbH,Hagen, Germany

Chair: K. Simpson, ExxonMobil Chemical Company, Baton Rouge, LA,USA

Co-Chair: R. Wink, Uhde High Pressure Technologies GmbH, Hagen,Germany

PVP2013-97578: HYPER COMPRESSOR TUNGSTEN CARBIDE PLUNGERREPAIRR. Manuel, Alloy Carbide, Houston, TX, USAPVP2013-97707: ASSESSMENT OF STRESS DISTRIBUTION IN A BUT-TRESS TYPE CONNECTION FOR POLYETHYLENE AUTOCLAVE REACTORN. Haeri, J. S. Lewis, B. A. Cornah, Simon Carves Engineering Ltd., Manchester,United KingdomPVP2013-97854: CEMENTED CARBIDE PLUNGERS FOR LDPE HYPERCOMPRESSORS: PROPERTIES, DEFECTS AND RECONDITIONINGL. van Loon, CTD, Liege, BelgiumSESSION 1.4I (DA-14-3)Monday, July 15, 4:00 pm – 5:45 pm, Level 0, Pont De Arts AFRACTURE 3Developed by: D. Moinereau, Electricite de France, Moret sur Loing, FranceChair: S. Krishnamurthy, UOP, Des Plaines, IL, USACo-Chair A. Gutkovsky, Chevron E.T.C., San Francisco, CA, USAPVP2013-97742: TO DETERMINATION OF THE WWER RPV STEELSCRACK RESISTANCE CHARACTERISTICSM. Zarazovskii, I. Orynyak, S. Radchenko, IPP-Centre Ltd., Kyiv, Ukraine; V.Kozlov, NNEGC Energoatom “SS Scientific and Technical Center,” Kyiv, UkrainePVP2013-97961: BRITTLE FRACTURE ANALYSES OF A DISSIMILARMETAL WELDA. Blouin, S. Chapuliot, AREVA, Paris, France; S. Marie, CEA, Gif sur Yvette,France; J.-M. Bergheau, Université de Lyon, Saint-Etienne, France; C. Niclaeys,Ecole Centrale de Lille, Villeneuve-d’Ascq, FrancePVP2013-97342: COMPARISON OF PTS GUIDES FOR REACTOR PRES-SURE VESSEL INTEGRITY ASSEESSMENTM. Brumovsky, UJV a.s., Rez, Czech RepublicSESSION 1.4J (SE-4-1)Monday, July 15, 4:00 pm – 5:45 pm, Level 0, Pont De Arts BSEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS #1Developed by: G. Slagis, G C Slagis Associates, Pleasant Hill, CA, USAChair: S. Sherfey, WestinghouseCo-Chair S. A. Karamanos, University of Thessaly, Volos, GreecePVP2013-97308: FITNESS-FOR-SERVICE ASSESSMENT OF PRESSUREEQUIPMENTS WITH LOCAL METAL LOSS SUBJECTED TO SEISMIC LOAD-INGT. Yamamoto, Mitsui Chemicals Inc., Takaishi, Osaka, Japan; T. Kaida,Sumitomo Chemical Co., Ltd., Niihama, Ehime-ken, Japan; S. Nagata, ToyoEngineering Corporation, Chiba, Japan; H. Tsuji, Tokyo Denki University, Tokyo,JapanPVP2013-97832: STUDY ON PIPING RESPONSE UNDER MULTIPLE EXCI-TATION—PART 1: TRIPLE SHAKING TABLE TEST OF PIPING HAVINGTHREE-SUPPORTING POINTST. Watakabe, Japan Atomic Energy Agency, Ibaraki, Japan; N. Kaneko, S. Aida,A. Otani, IHI Corporation, Yokahoma, Kanagawa, Japan; M. Moriizumi, K.Tsukimori, Japan Atomic Energy Agency, Ibaraki, Japan; S. Kitamura, JapanAtomic Energy Agency, Fukui, JapanPVP2013-97841: STUDY ON PIPING RESPONSE UNDER MULTIPLE EXCI-TATION—PART 2: VALIDATION FOR MULTIPLE EXCITATION ANALYSIS OFPIPINGS. Kai, N. Kaneko, K. Tochiki, IHI Corporation, Yokohama, Japan; T. Watakabe,M. Moriizumi, K. Tsukimori, Japan Atomic Energy Agency, Ibaraki, JapanPVP2013-97852: SEISMIC SAFETY CAPACITY OF A PIPING SYSTEM WITHPIPE SUPPORTS BASED ON THE SHAKE TABLE TESTI. Nakamura, National Res Inst of Earth Sci/Disaster Prevention, Tsukuba,Ibaraki, JapanSESSION 1.4K (OAC-8-3)Monday, July 15, 4:00 pm – 5:45 pm, Level 0, Pont De Arts CPLANT LIFE EXTENSION: AGING AND LIFE MANAGEMENT IIIDeveloped by: G. Bezdikian, Georges Bezdikian Consulting, Le Vesinet,

France; G. Young, Entergy Nuclear, Russellville, AR, USA

23

Chair: K.-S. Kang, International Atomic Energy Agency, Vienna,Austria

Co-Chair H. Rothenhöfer, AMTEC Messtechnischer Service GmbH,Lauffen, Germany

PVP2013-97472: INSTRUMENT NOZZLES FATIGUE STRENGTHREDUCTION FACTORK. Woods, InnoTech Engineering Solutions, LLC, Omaha, NE, USA; K. Thomas,Cooper Nuclear Station, Brownville, NE, USAPVP2013-97325: FATIGUE ANALYSIS OF FREE SPAN FOR SUBMARINEPIPELINEJ. Dong, C. Xuedong, B. Wang, W. Guan, T. Yang, Z. Fan, J. Pan, Hefei GeneralMachinery Research Institute, Hefei, Anhui, ChinaPVP2013-97750: STEAM METHANE REFORMER FURNACE OUTLETMANIFOLD COMPONENTS REPAIR EXPERIENCESJ. Penso, Shell Global Solutions, Cypress, TX, USA; S. Oza, Reliance IndustriesLtd., Jamnagar, Jamnagar, IndiaPVP2013-98131: LIFE EXTENSION OF HYDROCARBON EQUIPMENT INSOUR ENVIRONMENTS. Kumar, A. W. Al Mithin, M. Al-Shaiji, Kuwait Oil Company, Ahmadi, Kuwait; V.Jose, A. S. Hannan, International Inspection Centre, Ahmadi, KuwaitSESSION 1.4L (CT-4-1)Monday, July 15, 4:00 pm – 5:45 pm, Level 2, St. MichelASSEMBLY AND TIGHTENING OF BOLTED JOINTSDeveloped by: J. Waterland, VSP Technologies, Prince George, VA, USAChair: J. Waterland, VSP Technologies, Prince George, VA, USACo-Chair T. Kobayashi, Numazu College of Technology, Numazu,

Shizuoka, JapanPVP2013-97008: SPIRAL WOUND GASKET COMPRESSIBILITY ANDPRESSURE RATINGSJ. McCarthy, Dominion Generation, Chesapeake, VA, USA; J. Waterland, VSPTechnologies, Prince George, VA, USA; D. Reid, VSP Technologies, Kingwood,TX, USAPVP2013-97106: FEM CALCULATIONS AND EVALUATION OF SEALINGPERFORMANCE IN COMPARISON OF RAISED FACE AND FLAT FACEFLANGE CONNECTIONSR. Kurosawa, Yokogawa Electric Corporation, Kofu, Japan; T. Sawa, Y. Omiya,Hiroshima University, Hiroshima Pref., Japan; T. Kobayashi, Numazu College ofTechnology, Numazu, Shizuoka, Japan; K. Temma, Idemitsu Kosan Co., Ltd.,Chiba Pref., JapanPVP2013-97212: MODELLING AND SIMULATION OF RADIAL RINGROLLING PROCESS BASED ON FINITE ELEMENT ANALYSESZ. Feng, H. Champliaud, École de Technologie Supérieure, Montréal, CanadaPVP2013-97440: GASKET SELECTION AND ASSEMBLY CRITERIA FORINTERNAL SEALING MANWAYS AND HANDHOLESJ. Waterland, VSP Technologies, Prince George, VA, USAPVP2013-97581: FLANGE TIGHTENING EVALUATION METHOD FOR FLATFACE FLANGE WITH FULL FACE GASKETM. Mori, A. Nebu, Hitachi, Ltd., Hitachi, Japan; T. Kanno, Hitachi Power SolutionsCo., Ltd., Hitachi, JapanSESSION 1.4M (CS-14-1)Monday, July 15, 4:00 pm – 5:45 pm, Level 2, St. Germain Des Pres A+BREPAIR, REPLACEMENT AND MITIGATION FOR FITNESS-FOR-SERVICERULESSymposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: R. Yonekawa, Bechtel Corporation, San Francisco, CA, USA; K.

Dozaki, The Japan Atomic Power Co, Tokyo, JapanChair: K. Hojo, Mitsubishi Heavy Industries Ltd., Kobe, JapanCo-Chair R. Yonekawa, Bechtel Corporation, San Francisco, CA, USAPVP2013-97089: ADVANCED INLAY SYSTEM FOR INLET/OUTLET NOZ-ZLES OF RV FOR PREVENTIVE MAINTENANCE AGAINST ALLOY 600PWSCC IN JAPANESE PWR PLANTSK. Yamamoto, D. Hase, M. Kizawa, H. Kawazoe, Y. Kobayashi, K. Onishi,Mitsubishi Heavy Industries, Ltd., Kobe, Japan

PVP2013-97257: CRACK GROWTH BEHAVIOR AND PREVENTIVE MAINTE-NANCE FOR REACTOR INTERNALS WITH CRACKS IN TOKAI-2 NUCLEARPOWER PLANTT. Fujino, T. Terakado, K. Dozaki, N. Ito, K. Hasegawa, The Japan Atomic PowerCo., Tokyo, JapanPVP2013-97405: RELIABILITY OF WATER JET PEENING AS RESIDUALSTRESS IMPROVEMENTY. Kono, Mitsubishi Heavy Industries, Ltd., Hyogo prefecture, Japan; R. Toth,CEIDRE, EDF, Paris, France; C. Jardin, P. Le-Bec, R&D, EDF, Paris, France; K.Okimura, T. Sato, M. Tajima, Mitsubishi Heavy Industries, Ltd., Hyogo prefecture,JapanPVP2013-97652: EVALUATION FOR NONDESTRUCTIVE CRACK SIZINGCAPABILITY ON CRACKED SURFACE TREATED BY WATER JET PEENINGR. Kimura, F. Yoshikubo, K. Ehara, N. Murakami, A. Kanno, Hitachi-GE NuclearEnergy, Ltd., Hitachi, Ibaraki, JapanPVP2013-97835: ANALYSIS ON THE CRACKING MECHANICS AND REPAIRPROCEDURES FOR CRACKS IN THE SKIRT-TO-CONE FILLET WELD OFLARGE COKE DRUMX. Ma, Z. Wang, Jiangsu Province Special Equipment Safety SupervisionInspection Institute, Nanjing, Jiangsu, China; Z. Chen, Beijing University ofChemical Technology, Beijing, China; Y. Xie, Y. Wang, Jiangsu Province SpecialEquipment Safety Supervision Inspection Institute, Nanjing, ChinaSESSION 1.4N (FSI-2-3)Monday, July 15, 4:00 pm – 5:45 pm, Level 3, Le Parc Montsouris AVORTEX-INDUCED VIBRATIONS AND WAKE DYNAMICS IDeveloped by: L. Baranyi, University of Miskolc, Miskolc-Egyetemvaros,

HungaryChair: S. Kaneko, University of Tokyo, Tokyo, JapanCo-Chair S. Etienne, Ecole Polytechnique de Montreal, Montreal, QC,

CanadaPVP2013-97682: SYNCHRONIZATION CHARACTERISTICS OF VORTEXSHEDDING FROM TUBE BANKS ON ACOUSTIC RESONANCEH. Hamakawa, Oita University, Oita, Japan; E. Nishida, Shonan Institute ofTechnology, Fujisawa Kanagawa, Japan; K. Asakura, Oita University, Oita,JapanPVP2013-97888: SIMULATION OF LOW-REYNOLDS NUMBER FLOWAROUND A CIRCULAR CYLINDER FOLLOWING A SLENDER ELLIPTICALPATHL. Baranyi, University of Miskolc, Miskolc-Egyetemvaros, HungaryPVP2013-97943: NUMERICAL SIMULATION OF THREE-DIMENSIONALFLOW PAST AN OSCILLATING CYLINDERS. Peppa, Technological Educational Institute of Athens, Athens, Greece; L.Kaiktsis, G. Triantafyllou, National Technical University of Athens, Athens,GreecePVP2013-97277: FLOW-INDUCED TRANSVERSE VIBRATION OF ACANTILEVERED CYLINDER AND VIBRATION-GENERATED POWER USINGMAGNETOSTRICTIVE MATERIALT. Kiwata, M. Yamaguchi, T. Kono, T. Ueno, Kanazawa University, Kanazawa,Ishikawa, JapanSESSION 1.4O (MF-18-3)Monday, July 15, 4:00 pm – 5:45 pm, Level 3, Le Parc Montsouris BIMPACT OF MICROSTRUCTURE ON TIME DEPENDENT DEGRADATIONDeveloped by: M. Kerr, Knolls Atomic Power Laboratory, Schenectady, NY,

USA; P. Gilles, Areva NP, Paris, France; P. J. Bouchard, TheOpen University, Milton Keynes, United Kingdom

Chair: P. Gilles, Areva NP, Paris, FranceCo-Chair: P. J. Bouchard, The Open University, Milton Keynes, United

KingdomPVP2013-97702: COMPARISON OF P92 STEEL FATIGUE TEST RESULTS INRELATION TO SPECIMEN SIZE AND MANUFACTURINGJ. Volak, Z. Bunda, Research and Testing Institute Pilsen, Pilsen, CzechRepublic; Vaclav Mentl, University of West Bohemia in Pilsen, Plzeň, CzechRepublicPVP2013-97143: FRACTURE TOUGHNESS BEHAVIOR OF THROUGH-WALL CRACKS IN DISSIMILAR METAL WELDS

24

D. L. Rudland, R. Lukes, US Nuclear Regulatory Commission, Rockville, MD,USA; D.-J. Shim, S. Kalyanam, Engineering Mechanics Corporation ofColumbus, Columbus, OH, USAPVP2013-97185: FATIGUE IMPROVEMENT OF WELDED ELEMENTS ANDSTRUCTURES BY ULTRASONIC PEENINGY. Kudryavtsev, J. Kleiman, Structural Integrity Technologies Inc. (SINTEC),Markham, ON, CanadaPVP2013-97975: DIFFERENT MICROSTRUCTURES IN THE HAZ OF DOU-BLE SUBMERGED ARC WELDED PIPELINES AND HOW THEY INFLUENCETHE FATIGUE CRACK GROWTHB. Maier, C. Guster, Montanuniversität Leoben, Leoben, Austria; R. Tichy, W.Ecker, Materials Center Leoben Forschung GmbH, Leoben, AustriaSESSION 1.4Q (TW-1-7)Monday, July 15, 4:00 pm – 5:45 pm, Level 2, Les Invalides A+BAPPLICATION OF FITNESS-FOR-SERVICE CODES TO NUCLEARINSTALLATIONS—PART IIDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: B. Bezensek, Hunting Energy Services, Ltd; C. Faidy, ED-

SEPTEN; P. Budden, EDF Energy; and R. Cipolla, Intertek-APTECH

SESSION 1.4S (MF-29-4)Monday, July 15, 4:00 pm – 5:45 pm, Level 0, Foyer La SeineNDE DEMONSTRATION FORUM—IVSponsored by the PVP Senate, Materials & Fabrication TechnicalCommittee, and the ASME NDE DivisionDeveloped by: C. E. Jaske, Det Norske Veritas (USA), Inc., Dublin, OH, USA;

J. Todd, Penn State University, University Park, USA

TUESDAY, JULY 16

no textBlock 2.1: Tuesday, July 16 (8:30 am – 10:15 am)

no textSESSION 2.1A (MF-16-1)Tuesday, July 16, 8:30 am – 10:15 am, Level -1, Ella Fitzgerald BPLASTIC PIPE—SESSION 1Symposium of Plastics and Composites—Co-Sponsored by Design &Analysis, Materials & Fabrication, High Pressure Technology, and Codes &Standards Technical CommitteesDeveloped by: S. Kalyanam, D.-J. Shim, Engineering Mechanics Corporation

of Columbus, Columbus, OH, USAChair: P. Krishnaswamy, Engineering Mechanics Corporation of

Columbus, Columbus, OH, USACo-Chair P. Rush, MPR Associates, Alexandria, VA, USAPVP2013-97174: A NEW METHOD FOR MEASURING THE BONDINGSTRENGTH OF ELECTROFUSION JOINTJ. Zheng, D. Hou, J. Shi, S. Lu, J. Shi, P. Xu, Zhejiang University, Hangzhou,Zhejiang, ChinaPVP2013-97416: ASSESSMENT OF SLOW CRACK GROWTH TESTMETHODOLOGIES USED TO PREDICT SERVICE LIFE OF HIGH DENSITYPOLYETHYLENE PIPINGS. Kalyanam, P. Krishnaswamy, D.-J. Shim, Y. Hioe, Engineering MechanicsCorporation of Columbus, Columbus, OH, USA; S. Kawaguchi, T. Shimura, K.Numata, Tokyo Gas Company Ltd., Yokohama, JapanPVP2013-97743: MECHANICAL BEHAVIOR OF WELDED AND UNWELDEDPOLYETHYLENE PIPE MATERIALST. A. El-Bagory, Helwan University, Cairo, Egypt; H. Sallam, Jazan University,Jazan, Saudi Arabia; M. Y. A. Younan, American University in Cairo, New Cairo,EgyptPVP2013-98042: EXPERIMENTAL STUDY OF CRACK GROWTH IN HDPEPE100 PIPESR. Machado, UNE Francisco de Miranda, Punto Fijo, Falcon, Venezuela; M.

Gonzalez, J. Gonzalez, Universidad Simon Bolivar, Caracas, Miranda,VenezuelaPVP2013-97778: STUDY ON CONSTITUTIVE MODELING FOR LARGEDEFORMATION BEHAVIOR OF POLYETHYLENE CONSIDERING STRAINRATE EFFECTS. Zhong, J. Shi, J. Zheng, Zhejiang University, Hangzhou, Zhejiang, ChinaSESSION 2.1B (SPC-1-3)Tuesday, July 16, 8:30 am – 10:15 am, Level -1, Ella Fitzgerald ASTUDENT PAPER COMPETITION III—PHD LEVELDeveloped by: Y. W. Kwon, Naval Postgraduate School, Monterey, CA, USA;

R. S. Hafner, Lawrence Livermore National Laboratory,Livermore, CA, USA

Chair: S. Leen, NUI Galway, Galway, IrelandCo-Chair K. Takahashi, Yokohama National University, Yokohama, JapanPVP2013-97982: NUMERICAL ANALYSES OF INTERACTION BEHAVIOR OFMULTIPLE SURFACE CRACKS USING A MODIFIED CREEP-DAMAGEMODEL AND FRACTURE MECHANICS APPROACHJ.-F. Wen, F.-Z. Xuan, S. T. Tu, East China University of Science and Technology,Shanghai, ChinaPVP2013-98159: BUCKLING OF HIGH-STRENGTH STEEL CYLINDERSUNDER CYCLIC BENDING IN THE INELASTIC RANGEG. E. Varelis, S. A. Karamanos, University of Thessaly, Volos, GreecePVP2013-97565: INVESTIGATING THE INFLUENCE OF FLUID-STRUCTUREINTERACTION ON LEAK-BEFORE-BREAK ANALYSES WITH A NEW FINITEELEMENT METHODP. Gill, University of Manchester, Blackburn, United Kingdom; J. K. Sharples,AMEC Power and Process Europe, Warrington, United Kingdom; K. Davey,University of Manchester, Manchester, United KingdomPVP2013-97042: BEHAVIOR OF COMPRESSIVE RESIDUAL STRESSES INHIGH STRENGTH STEEL WELDS INDUCED BY HIGH FREQUENCYMECHANICAL IMPACT TREATMENTM. Khurshid, Z. Barsoum, KTH-Royal Institute of Technology, Stockholm,Sweden; G. Marquis, Aalto University (Finland), Royal Institute of Technology(Sweden), Helsinki, FinlandSESSION 2.1C (CS-3-3)Tuesday, July 16, 8:30 am – 10:15 am, Level -1, Miles Davis CENVIRONMENTAL FATIGUE ISSUES—IIISponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: G. Stevens, U.S. Nuclear Regulatory Commission, Washington,

DC, USA; H. Mehta, GE-Hitachi Nuclear Energy, Wilmington,NC, USA; S. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe,Japan

Chair: J. Zheng, Zhejiang University, Hangzhou, Zhejiang, ChinaCo-Chair M. Breach, GE-Hitachi Nuclear Energy, Wilmington, NC, USAPVP2013-97519: FATIGUE OF STAINLESS STEEL COMPONENTS:TOWARD CODIFIED RULESC. Faidy, Tassin, FrancePVP2013-97597: APPLICATION OF COMMON BASIS STRESS EVALUATIONMETHODOLOGY FOR ENVIRONMENTALLY ASSISTED FATIGUE FOR APRESSURIZED WATER REACTORW. Weitze, T. Gilman, Structural Integrity Associates, Inc., San Jose, CA, USA;L. Drenth, Xcel Energy, Welch, MN, USAPVP2013-97695: OVERVIEW OF INTERNATIONAL IMPLEMENTATION OFENVIRONMENTAL FATIGUEF. H. E. de Haan - de Wilde, M. H. C. Hannink, F. J. Blom, NRG, Petten,NetherlandsPVP2013-97770: A PROPOSAL OF FATIGUE LIFE EQUATIONS FORCARBON & LOW-ALLOY STEELS AND AUSTENITIC STAINLESS STEELSAS A FUNCTION OF ITS TENSILE STRENGTHH. Kanasaki, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; M. Higuchi,Central Research Institute of Electric Power Industry, Yokohama, Japan; S. S.Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; M. Yasuda, T. Sera, TheKansai Electric Power Co., Inc., Osaka, Japan

25

SESSION 2.1D (FSI-1-4)Tuesday, July 16, 8:30 am – 10:15 am, Level -1, Miles Davis BFLUID TRANSIENTS AND STRUCTURAL ANALYSISDeveloped by: F. J. Moody, GE Retiree, Turlock, CA, USA; C. S. Martin,

Georgia Tech, South Dennis, GA, USAChair: F. J. Moody, GE Retiree, Turlock, CA, USACo-Chair: C. S. Martin, Georgia Tech, South Dennis, GA, USAPVP2013-97317: CRACK PROPAGATION DUE TO MOVEMENT OR SIZECHANGE OF HOT SPOT IN PIPEJ. E. Wirgart, T. Terai, N. Kasahara, The University of Tokyo, Tokyo, Bunkyo-ku,JapanPVP2013-97422: SMALL SCALE BURST FACILITY: EXPERIMENTALINVESTIGATION OF FLUID-STRUCTURE INTERACTION IN A PHWRJ. Baschuk, B. Leitch, A. West, Atomic Energy of Canada Limited, Chalk River,ON, CanadaPVP2013-97534: ACOUSTIC RESONANCE EXPERIMENTS IN A RESER-VOIR-PIPELINE-ORIFICE SYSTEMA. Tijsseling, TU Eindhoven, Eindhoven, Netherlands; Q. Hou, Tianjin University,Tianjin, China; B. Svingen, Rainpower Norge AS, Trondheim, Norway; A.Bergant, Litostroj Power d.o.o., Ljubljana, SloveniaPVP2013-97726: STRESS ANALYSIS OF PIPELINE SUBJECTED TO DIF-FERENTIAL FROST HEAVEY. Di, China Petroleum & Chemical Corporation, Beijing, China; J. Shuai, L.Kong, X. Zhou, China University of Petroleum (Beijing), Beijing, ChinaSESSION 2.1E (MF-4-4)Tuesday, July 16, 8:30 am – 10:15 am, Level -1, Miles Davis ARESIDUAL STRESS MEASUREMENTS: IN-PROGRESS TECHNIQUESDeveloped by: E. Keim, AREVA NP GmbH, Erlangen, GermanyChair: D. L. Rudland, US Nuclear Regulatory Commission, Rockville,

MD, USACo-Chair F. W. Brust, Engineering Mechanics Corp of Columbus,

Columbus, OH, USAPVP2013-97338: COMBINED MEASUREMENT AND FINITE ELEMENTANALYSIS TO MAP RESIDUAL STRESSES IN WELDED COMPONENTSS. Do, K. Serasli, D. Smith, University of Bristol, Bristol, United KingdomPVP2013-97350: ASSESSING RESIDUAL STRAINS IN NUCLEAR POWERREACTOR INTERNAL COMPONENTS WELD MOCKUPS OF NICKELALLOYS USING EBSDM. A. Othon, M. M. Morra, GE Global Research, Schenectady, NY, USA; S. Ooki,Tepco R&D Center, Yokohama, Japan; R. B. Rebak, GE Global Research,Schenectady, NY, USAPVP2013-97354: RESIDUAL STRESS EVALUATION OF T-SHAPEDSS304/BNI-2/SS304 BRAZED JOINT USING NANOINDENTATIONTECHNIQUEH. Chen, Ningbo Special Equipment Inspection Institute, Ningbo, China; J.Gong, Nanjing University of Technology, Nanjing, ChinaPVP2013-97360: EVALUATION OF RESIDUAL STRESS OF WELDMENTFROM INDENTATION TAKING ACCOUNT OF CONTACT MORPHOLOGYFOR ESTIMATING STRESS-FREE CURVE (Presentation Only)Y.-C. Kim, J.-W. Chung, J.-Y. Kim, J.-H. Kim, M.-J. Choi, D. Kwon, Seoul NationalUniversity, Seoul, Korea (Republic)SESSION 2.1F (CS-7-2)Tuesday, July 16, 8:30 am – 10:15 am, Level -1, Louis Armstrong A+BPANEL SESSION: THE INTERNATIONAL COOPERATION ON THE HAR-MONISATION OF MECHANICAL DESIGN CODESDeveloped by: A. Wasylyk, World Nuclear Association, London, United

KingdomChair: A. Wasylyk, World Nuclear Association, London, United

KingdomCo-Chair M. Rana, Praxair, Inc., Tonawanda, NY, USAPanelists:A. Wasylyk, World Nuclear Association, London, United KingdomB. François, ONET Technologies, Marseille, FranceP. Malouines, AFCEN, Paris, France

SESSION 2.1G (DA-2-1)Tuesday, July 16, 8:30 am – 10:15 am, Level -1, Louis Armstrong C+DDESIGN & ANALYSIS OF PIPING & PIPING COMPONENTS IDeveloped by: C. Basavaraju, US Nuclear Regulatory Commission, Rockville,

MD, USA; B. Li, AMEC NSS Ltd., Toronto, Canada; A. Dweib,Worley Parsons, Atyrau, Kazakhstan; N. Zobeiry, Hatch,Mississauga, Canada

Chair: C. Basavaraju, US Nuclear Regulatory Commission, Rockville,MD, USA

Co-Chair: B. Li, AMEC NSS Ltd., Toronto, CanadaPVP2013-97002: APPLICATION OF MONO LEAF SPRING AS A PIPE SUP-PORTJ. Ozmaian, B. Choudhury, WorleyParsons, Edmonton, AB, CanadaPVP2013-97081: ELASTIC STRESSES AND LIMITED BENDING MOMENTSOF CONCENTRIC AND ECCENTRIC REDUCERS SUBJECT TO BENDINGMOMENTSS. Chen, The Challenge Petrochemical Machinery Corporation of Maoming,Maoming City, China; J. Chen, C. Wang, C. Liu, East China University of Scienceand Technology, shanghai, ChinaPVP2013-97182: COMPARISON BETWEEN HYDROTEST AND LOCALHYDROTEST METHODS FOR PIPE WELDSW. Brown, Integrity Engineering Solutions, Dunsborough, AustraliaPVP2013-97583: A PREDICTIVE MODEL FOR GAS FLOW THROUGH ABORE-PISTON RING CONTACTB. Hallouin, D. Lasseux, University Bordeaux, Talence, FranceSESSION 2.1H (NDE-1-1)Tuesday, July 16, 8:30 am – 10:15 am, Level 0, Pont De Sully A+BNDE TESTING METHODS AND REQUIREMENTSSponsored by the ASME NDE Division and Materials & FabricationTechnical CommitteeDeveloped by: W. T. Springer, University of Arkansas, Fayetteville, AR, USAChair: M. Carte, OlympusNDT, Houston, TX, USACo-Chair S. W. Glass, AREVA, Lynchburg, VA, USAPVP2013-97555: NONDESTRUCTIVE TESTING METHOD AND TESTINGTIME CHOICE OF PRESSURE EQUIPMENTW. Guan, C. Xuedong, C. Yan, Y. Fan, Y. Tao, Hefei General MachineryResearch Institute, Hefei, Anhui, ChinaPVP2013-97577: ALTERNATE REQUIREMENTS FOR PROTECTIONAGAINST PRESSURIZED THERMAL SHOCK (PTS)S. Parker, N. Palm, Westinghouse Electric Company, Cranberry Township, PA,USA; X. Pitoiset, Westinghouse Electric Company, Nivelles, BelgiumPVP2013-97704: IMAGE QUALITY ASSESSMENT OF FOUR DIFFERENTCOMPUTED RADIOGRAPHY SYSTEMS FOR NDT APPLICATIONSA. Peterzol, AREVA NDE Solutions/Intercontrôle, Chalon-sur-Saône, France; B.Bader, AREVA IBMTE-F, Chalon-sur-Saône, France; J. Banchet, AREVA NDESolutions/NETEC, Lyon, France; C. Caperaa, V. Didier, EDF CEIDRE, St Denis,FrancePVP2013-97760: TUBE INSPECTION WITH PULSE REFLECTOMETRY(Presentation Only)N. Amir, Acoustic Eye, Tel Aviv, IsraelPVP2013-98087: THE UTILITY OF NUMERICAL METHODS IN NDEJ. Van Velsor, Structural Integrity Associates, Inc., State College, PA, USA; J.Milligan, M. Greveling, Structural Integrity Associates, Inc., Charlotte, NC, USA;M. S. Lindsey, Structural Integrity Associates, Inc., State College, PA, USASESSION 2.1I (DA-13-1)Tuesday, July 16, 8:30 am – 10:15 am, Level 0, Pont De Arts ACFD IN DESIGN & ANALYSIS 1Developed by: S. McGuffie, Porter McGuffie, Inc., Lawrence, KS, USA; M.

Porter, Porter McGuffle Inc., Lawrence, KS, USAChair: R. Baliga, ADVENT Engineering Services, Inc., San Ramon,

CA, USACo-Chair S. Krishnamurthy, UOP, Des Plaines, IL, USAPVP2013-97292: A CFX SIMULATION OF THE OECD/NEA T-JUNCTIONBENCHMARK

26

J. Gillis, B. Belley, Structural Integrity Associates, Inc., San Jose, CA, USA; M.Romero, Intermolecular, Inc., San Jose, CA, USAPVP2013-97467: COMPARISON OF METAL TEMPERATURES OBTAINEDFROM CONJUGATE HEAT TRANSFER CFD ANALYSIS AND THERMALFINITE ELEMENT ANALYSIS OF A VALVEG. Bowie, A. Fletcher, G. Reed, Assystem UK Limited, Sunderland, Tyne & Wear,United Kingdom; L. Davenport, P. Hugill, Rolls-Royce plc, Derby, UnitedKingdomPVP2013-97929: A PARAMETRIC CFD ANALYSIS ON THE VALVE POCKETLOSSES IN RECIPROCATING COMPRESSORSF. Balduzzi, G. Ferrara, R. Maleci, University of Florence, Florence, Italy; A.Babbini, G. Pratelli, GE Oil & Gas, Florence, ItalyPVP2013-97995: REDUCTION OF STACK VORTEX INDUCED VIBRATIONSS. McGuffie, M. Porter, Porter McGuffie, Inc., Lawrence, KS, USASESSION 2.1J (SE-4-2)Tuesday, July 16, 8:30 am – 10:15 am, Level 0, Pont De Arts BSEISMIC ANALYSIS AND DESIGN OF PIPING SYSTEMS #2Developed by: G. Slagis, G C Slagis Associates, Pleasant Hill, CA, USAChair: S. Sherfey, WestinghouseCo-Chair T. Taniguchi, Tottori University, Tottori, JapanPVP2013-98067: INELASTIC RESPONSE OF A SDOF STRUCTURE TOEARTHQUAKE MOTIONS SYNTHESIZED IN WAVELET DOMAINA. Masuda, A. Sone, Kyoto Institute of Technology, Kyoto, JapanPVP2013-97117: A PARAMETRIC STUDY OF INDEPENDENT SUPPORTMOTION METHOD FOR THE STEAM SUPPLY PIPING CONNECTED TO THEHP TURBINE OF APR 1400D. S. Kim, J. H. Lee, I. Y. Kim, KEPCO Engineering & Construction Company,Yongin-si, Gyeonggi-do, Korea (Republic)PVP2013-97716: EVALUATING THE PERFORMANCE OF URBAN WATERPIPELINES USING HYBRID HFA-FEA APPROACHS. K. S. Shokouhi, Islamic Azad University, South Tehran Branch, Tehran, Iran;A. Dolatshah, Islamic Azad University, Dezful Branch, Tehran, Iran; H. R.Vosoughifar, Islamic Azad University, South Tehran Branch, Tehran, Iran; Y.Rahnavard, Technical University of Braunschweig, Braunschweig, GermanyPVP2013-97222: ANALYTICAL STUDY ON EFFECT OF FAILURE OF PIPESUPPORT STRUCTURE ON SEISMIC RESPONSE OF PIPING SYSTEMT. Takahashi, A. Maekawa, Institute of Nuclear Safety System, Inc., Fukui, JapanSESSION 2.1K (OAC-1-1)Tuesday, July 16, 8:30 am – 10:15 am, Level 0, Pont De Arts CSAFETY, RELIABILITY AND RISK ASSESSMENT FOR NUCLEAR POWERAPPLICATIONSSymposium of Safety, Reliability and Risk Assessment – Co-Sponsored byComputer Technology & Bolted Joints, Materials & Fabrication, OperationsApplications & Components, Design and Analysis, and Codes & StandardsTechnical CommitteesDeveloped by: A. Reich, Streamline Automation LLC, Huntsville, AL, USAChair: T. Kikuchi, IDEMITSU, Chiba, JapanCo-Chair D. Bianchini, Sargent & Lundy, LLC, Chicago, IL, USAPVP2013-97262: EFFECTS OF FRACTURE TOUGHNESS CURVES OFASME SECTION XI—APPENDIX G ON A REACTOR PRESSURE VESSELUNDER PRESSURETEMPERATURE LIMIT OPERATIONH.-W. Chou, C.-C. Huang, K.-R. Huang, R.-F. Liu, Institute of Nuclear EnergyResearch, Taoyuan, TaiwanPVP2013-97569: A COMPARISON BETWEEN PROBABILISTIC AND DETER-MINISTIC FRACTURE MECHANICS ASSESSMENT APPROACHES FORSTRUCTURAL INTEGRITY ASSESSMENT OF RPV UNDER PTSZ. Gao, Y. LI, Y. Lei, Zhejiang University of Technology, Hangzhou, Zhejiang,ChinaPVP2013-97875: RELEVANCE OF A SIZE EFFECT CORRECTION ON A MIN-IMAL VALUE OF FERRITIC STEEL TOUGHNESS IN THE DUCTILE-TO-BRITTLE BEHAVIOR REGION FOR STUDYING THE RESISTANCE OFFRENCH PWR RPVI. Delvallee-Nunio, F. Balestreri, IRSN, Fontenay-aux-Roses, FrancePVP2013-98030: ASME CODES SUPPORT SMALL MODULAR REACTORDEVELOPMENT AND USE—UNIQUE DESIGNS REQUIRE A ROBUST CODE

D. Demoss, D. Bianchini, W. R. Peebles Jr., Sargent & Lundy, LLC, Chicago, IL,USAPVP2013-98109: PRELIMINARY EVELUATION OF THE FLOODINGEFFECTS ON AN EXISTING PWRV. Baudanza, R. Lo Frano, G. Forasassi, University of Pisa, Pisa, ItalySESSION 2.1L (CT-5-1)Tuesday, July 16, 8:30 am – 10:15 am, Level 2, St. MichelTHREADED FASTENERS IDeveloped by: S. Nassar, Oakland University, Rochester, MI, USAChair: T. Sawa, Hiroshima University, Higashi-hiroshima City, JapanCo-Chair T. Fukuoka, Kobe University, Kobe, JapanPVP2013-97145: INVERSE SOLUTION FOR BOLT PRELOAD USING JOINTSURFACE DEFORMATIONA. Zaki, S. Nassar, M. Shillor, S. Kruk, Oakland University, Rochester, MI, USAPVP2013-97191: EFFECTS OF NUT THINNING ON THE BOLT LOADREDUCTION IN BOLTED FLANGE JOINTS UNDER INTERNAL PRESSUREAND BENDING MOMENTST. Kikuchi, IDEMITSU, Chiba, Japan; T. Sawa, Hiroshima University, Higashi-hiroshima City, JapanPVP2013-97830: FEM CONTACT STRESS ANALYSIS AT THE BEARINGSURFACES IN BOLTED JOINTS WITH WASHERS UNDER TENSILELOADINGST. Sawa, Y. Omiya, K. Kuwaki, Hiroshima University, Higashi-hiroshima City,JapanPVP2013-97146: CREEP RELAXATION PROCEDURE FOR ACHIEVINGUNIFORM CLAMP LOAD DISTRIBUTION IN GASKETED BOLTED JOINTSUSING SIMULTANEOUS TIGHTENINGA. Abboud, S. Nassar, Oakland University, Rochester, MI, USAPVP2013-97606: A NEW EXPERIMENTAL APPROACH FOR MEASURINGFRICTION COEFFICIENTS OF THREADED FASTENERS FOCUSING ONTHE REPETITION OF TIGHTENING OPERATION AND SURFACEROUGHNESST. Fukuoka, M. Nomura, H. Kawabayashi, Kobe University, Kobe, JapanSESSION 2.1M (CS-17-1)Tuesday, July 16, 8:30 am – 10:15 am, Level 2, St. Germain Des Pres A+BCOMBINATION OF MULTIPLE LOADS IN DESIGN AND FITNESS-FOR-SERVICESymposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: P. Hoang, Sargent and Lundy, Chicago, IL, USA; Y. Li, Japan

Nuclear Energy Safety Organization, Tokyo, JapanChair: B. Bezensek, Shell U.K Limited, Aberdeen, Aberdeen, United

KingdomCo-Chair Y. Li, Japan Nuclear Energy Safety Organization, Tokyo, JapanPVP2013-97834: DAMAGE PROCESS COMPARED TO THE DESIGNSTANDARD OF THE ELBOW SUBJECTED TO IN-PLANE CYCLIC BENDINGLOADI. Nakamura, National Res Inst of Earth Sci/Disaster Prevention, Tsukuba,Ibaraki, Japan; A. Otani, IHI Corporation, Yokahoma, Kanagawa, Japan; M.Shiratori, Yokohama National University, Yokohama, Kanagawa, JapanPVP2013-97836: EFFECT OF LOCAL WALL THINNING ON LOW CYCLEFATIGUE BEHAVIORS OF ELBOW WITH INTERNAL PRESSURE—ESTIMATION OF FATIGUE LIFE BASED ON REVISED UNIVERSAL SLOPEMETHODK. Takahashi, K. Sato, K. Matsuo, K. Ando, Yokohama National University,Yokohama, Japan; Y. Urabe, Japan Nuclear Safety Institute, Tokyo, Japan; A.Hidaka, M. Hisatsune, Hitachi GE Nuclear Energy, Ltd., Hitachi, Japan; K.Miyazaki, Hitachi Research Lab, Hitachi Ltd., Ibaraki-ken, JapanPVP2013-97837: A BENCHMARK STUDY OF LIMIT LOAD FINITE ELEMENTANALYSIS FOR LOCALLY WALL THINNED PIPESP. Hoang, Sargent and Lundy, Chicago, IL, USA; B. Bezensek, Shell U.K.Limited, Aberdeen, United Kingdom; H. Rathbun, Lawrence Livermore NationalLaboratory, Livermore, CA, USAPVP2013-97667: EXPERIMENTAL INVESTIGATION ON FAILURE

27

ESTIMATION METHOD FOR CIRCUMFERENTIALLY CRACKED PIPESSUBJECTED TO COMBINED BENDING AND TORSION LOADSY. Li, K. Hasegawa, Japan Nuclear Energy Safety Organization, Tokyo, Japan;M. Sakai, S. Matsuura, Central Research Institute of Electric Power Industry,Abiko, Japan; N. Miura, Central Research Institute of Electric Power Indus,Yokosuka, JapanSESSION 2.1N (FSI-2-4)Tuesday, July 16, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris AAXIAL AND LEAKAGE-FLOW-INDUCED VIBRATION IDeveloped by: N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,

Canada; D. S. Weaver, McMaster University, Hamilton, ON,Canada

Chair: H. S. Kang, Korea Atomic Energy Research Institute, Daejeon,Korea (Republic)

Co-Chair A. Shintani, Osaka Prefecture University, Sakai Osaka, JapanPVP2013-97132: DYNAMIC STABILITY OF A FLEXIBLE PLATE MOVING INA PARALLEL FLOWK. Fujita, Osaka City University, Osaka-prefecture, JapanPVP2013-97373: STABILITY OF A FLEXIBLE WALL SEPARATING TWOINVISCID CHANNEL FLOWSM. A. Burke, A. D. Lucey, N. S. J. Elliott, R. M. Howell, Curtin University, Perth,WA, AustraliaPVP2013-97527: NUMERICAL COMPUTATION OF MODALCHARACTERISTICS OF A FLEXIBLE TUBE IN TURBULENT AXIAL WATERFLOWJ. De Ridder, J. Degroote, Ghent University, Ghent, Belgium; K. Van Tichelen, P.Schuurmans, SCK-CEN, Mol, Belgium; J. Vierendeels, Ghent University, Ghent,BelgiumPVP2013-97384: DYNAMIC COEFFICIENTS IDENTIFICATION USING THEPOD METHODG. Ricciardi, E. Boccaccio, CEA Cadarache, St Paul Les Dirance, FranceSESSION 2.1O (MF-5-1)Tuesday, July 16, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris BEUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY—IDeveloped by: E. Keim, AREVA NP GmbH, Erlangen, Germany; D. Moinereau,

Electricite de France, Moret sur Loing, France; T. Nicak, AREVAGmbH, Erlangen, Germany; P. James, AMEC Clean EnergyEurope, Warrington, Cheshire, United Kingdom

Chair: E. Keim, AREVA NP GmbH, Erlangen, GermanyCo-Chair: P. James, AMEC Clean Energy Europe, Warrington, Cheshire,

United KingdomPVP2013-97136: EUROPEAN PROJECT ON STRUCTURAL INTEGRITYSTYLE: PROJECT STATUST. Nicak, E. Keim, AREVA NP GmbH, Erlangen, GermanyPVP2013-97391: MANUFACTURE, RESIDUAL STRESS MEASUREMENTAND ANALYSIS OF A VVER-440 NOZZLE MOCKUPT. Levente, G. Török, Hungarian Academy of Sciences, Budapest, Hungary; D.Smith, S. Do, University of Bristol, Bristol, United Kingdom; C. Ohms, JointResearch Centre, Petten, Netherlands; L. Kovács, Metalelektro MeasuringTechnique Ltd., Budapest, HungaryPVP2013-97087: THE DELIVERY OF TECHNICAL TRAINING WITHIN THEEUROPEAN STYLE PROJECTA. Toft, J. K. Sharples, AMEC Power and Process Europe, Warrington, UnitedKingdomPVP2013-97862: STYLE PROJECT: PREPARATION AND INTERPRETATIONOF A FOUR POINTS BENDING TESTS ON A EPR TYPE DMW PIPE CON-TAINTING A CIRCUMFERENTIAL THROUGH-WALL DEFECT (PresentationOnly)M. Bourgeois, S. Marie, CEA, Gif sur Yvette, France; S. Chapuliot, AREVA,Paris, FranceSESSION 2.1Q (TW-1-10)Tuesday, July 16, 8:30 am – 10:15 am, Level 2, Les InvalidesPVP CONFERENCE ORGANIZER TRAININGSponsored by ASME PVP Executive Committee and Senate

Developed by: M. E. Nitzel, M. E. Nitzel Engineering Services, Nampa, USAChair: M. E. Nitzel, M. E. Nitzel Engineering Services, Nampa, USACo-Chair: D. T. Peters, Structural Integrity Associates, Edinboro, PA, USAPresented by: M. E. Nitzel, M. E. Nitzel Engineering Services, Nampa, USA;

D. T. Peters, Structural Integrity Associates, Edinboro, PA, USASESSION 2.1S (CT-15-1)Tuesday, July 16, 8:30 am – 10:15 am, Level 0, Foyer La SeineSOFTWARE DEMONSTRATION FORUM IDeveloped by: J. F. Cory Jr., Siemens PLM Software, Milford, USAChair: J. F. Cory Jr., Siemens PLM Software, Milford, USA

no textBlock 2.2: Tuesday, July 16 (10:30 am – 12:15 pm)

no textSESSION 2.2A (MF-16-2)Tuesday, July 16, 10:30 am – 12:15 pm, Level -1, Ella Fitzgerald BPLASTIC PIPES—SESSION 2Symposium of Plastics and Composites—Co-Sponsored by Design &Analysis, Materials & Fabrication, High Pressure Technology, and Codes &Standards Technical CommitteesDeveloped by: D.-J. Shim, S. Kalyanam, Engineering Mechanics Corp of

Columbus, Columbus, OH, USAChair: P. Rush, MPR Associates, Alexandria, VA, USACo-Chair M. A Spicer, TWI Ltd., Cambridge, United KingdomPVP2013-97098: DEVELOPMENT AND ASSESSMENT OF ULTRASONICINSPECTION SYSTEM FOR POLYETHYLENE PIPESM. A Spicer, M. Troughton, F. Hagglund, TWI Ltd., Cambridge, United KingdomPVP2013-97477: LONG TERM PERFORMANCE OF PE4710 MATERIALS INDISINFECTANT TREATED NUCLEAR RAW WATER SYSTEMSA. Summe, Electric Power Research Institute, Charlotte, NC, USA; D. Munson,Electric Power Research Institute, Palo Alto, CA, USA; K. Oliphant, S. Chung,Jana Laboratories Inc., Aurora, ON, CanadaPVP2013-97821: EVALUATION OF NONLINEAR DAMPING PROPERTIES OFMAGNETORHEOLOGICAL GELS UNDER SHEAR LOADINGY. Shibuya, Akita University, Akita, Japan; H. Nasuno, H. Sakurai, Taica Co. Ltd.,Shizuoka, Shizuoka, Japan; K. Sunakoda, Sanwa Tekki Corporation,Utsunomiya, Tochigi, JapanPVP2013-97579: INVESTIGATION ON SHEAR STRENGTH OF STEEL-POLYMER INTERFACE IN PLASTIC PIPE REINFORCED BY CROSSHELICALLY WOUND STEEL WIRESJU. Shi, JI. Shi, J. Zheng, Zhejiang University, Hangzhou, Zhejiang, ChinaSESSION 2.2B (SPC-1-4)Tuesday, July 16, 10:30 am – 12:15 pm, Level -1, Ella Fitzgerald ASTUDENT PAPER COMPETITION IV—PHD LEVELDeveloped by: Y. W. Kwon, Naval Postgraduate School, Monterey, CA, USA;

R. S. Hafner, Lawrence Livermore National Laboratory,Livermore, CA, USA

Chair: R. Adibiasl, AMEC NSS, Toronto, CanadaCo-Chair K. Takahashi, Yokohama National University, Yokohama, JapanPVP2013-97099: COALESCED MARTENSITE IN PRESSURE VESSELSTEELSH. P. Romero, H. K. D. H. Bhadeshia, University of Cambridge, Cambridge,Cambridgeshire, United KingdomPVP2013-97514: MICROSTRUCTURAL MODELLING OF P91 MARTENSITICSTEEL UNDER MULTI-AXIAL LOADING CONDITIONSB. Golden, D. Li, N. O’Dowd, University of Limerick, Limerick, IrelandPVP2013-97341: A NOVEL PROCEDURE FOR MEASURING THE DYNAMICFRACTURE TOUGHNESS USING DIRECT TENSION HOPKINSON BARG. Testa, A. Ruggiero, N. Bonora, University of Cassino and Southern Lazio,Cassino, ItalyPVP2013-97100: A MICROMECHANICS APPROACH FOR ASSESSING THEAPPLICABILITY OF PRECRACKED CHARPY SPECIMENS TO DETERMINETHE T0 REFERENCE TEMPERATURER. Savioli, C. Ruggieri, University of Sao Paulo, Sao Paulo, Brazil

28

SESSION 2.2C (CS-3-4)Tuesday, July 16, 10:30 am – 12:15 pm, Level -1, Miles Davis CENVIRONMENTAL FATIGUE ISSUES—IVSponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: H. Mehta, GE-Hitachi Nuclear Energy, Wilmington, NC, USA; G.

Stevens, U.S. Nuclear Regulatory Commission, Washington,DC, USA; S. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe,Japan

Chair: S. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanCo-Chair M. Breach, GE-Hitachi Nuclear Energy, Wilmington, NC, USAPVP2013-97500: ENVIRONMENTAL FATIGUE FACTORS (NUREG/CR-6909)AND STRAIN CONTROLLED DATA FOR STABILIZED AUSTENITICSTAINLESS STEELJ. Solin, VTT, Espoo, Finland; S. H. Reese, Ertugrul Karabaki, E.ON KernkraftGmbH, Hannover, Germany; W. Mayinger, Fennovoima Oy, Helsinki, FinlandPVP2013-97502: FATIGUE PERFORMANCE OF STABILIZED AUSTENITICSTAINLESS STEELS—EXPERIMENTAL INVESTIGATIONS RESPECTINGOPERATIONAL RELEVANT CONDITIONS LIKE TEMPERATURE AND HOLDTIME EFFECTSJ. Solin, VTT, Espoo, Finland; S. H. Reese, Ertugrul Karabaki, E.ON KernkraftGmbH, Hannover, Germany; W. Mayinger, Fennovoima Oy, Helsinki, FinlandPVP2013-97394: FATIGUE BEHAVIOUR OF NUCLEAR MATERIALS UNDERAIR AND ENVIRONMENTAL CONDITIONSK.-H. Herter, T. Weissenberg, X. Schuler, MPA University Stuttgart, Stuttgart,Baden-Württemberg, GermanyPVP2013-97230: A PARAMETRIC STUDY INTO THE COMPETING EFFECTSOF STRESS AND STRAIN RATE IN ENVIRONMENTAL FATIGUE USAGECALCULATIONS FOR STAINLESS STEELSJ. Emslie, C. Watson, Rolls-Royce, Derby, United KingdomSESSION 2.2E (MF-4-5)Tuesday, July 16, 10:30 am – 12:15 pm, Level -1, Miles Davis AWELDED STRUCTURES AND CRACK GROWTH CONSIDERATIONSDeveloped by: F. W. Brust, Engineering Mechanics Corp of Columbus,

Columbus, OH, USAChair: P. J. Bouchard, The Open University, Milton Keynes, United

KingdomCo-Chair J. Walsh, University of Manchester, Manchester, United

KingdomPVP2013-97838: STUDY ON WELD RESIDUAL STRESS AND CRACKPROPAGATION EVALUATIONS FOR A SADDLE-SHAPED WELD JOINTJ. Katsuyama, K. Masaki, K. Onizawa, Japan Atomic Energy Agency, Tokai-mura, Ibaraki, JapanPVP2013-98017: STUDY ON CRACK EXTENSION EFFECTS ON WELDINGINDUCED RESIDUAL STRESS FIELDJ. K. Hong, T. P. Forte, Battelle, Columbus, OH, USAPVP2013-97442: PIPE GIRTH WELD RESIDUAL STRESS INTENSITYFACTOR PROFILES FOR STRUCTURAL INTEGRITY ASSESSMENTP. J. Bouchard, The Open University, Milton Keynes, United KingdomPVP2013-98065: WELD RESIDUAL STRESS ANALYSIS AND AXIAL PWSCCPREDICTIONS IN A DOUBLE VEE GROOVE LARGE DIAMETER NOZZLEF. W. Brust, Engineering Mechanics Corp of Columbus, Columbus, OH, USA; D.Rudland, US Nuclear Regulatory Commission, Rockville, MD, USA; H. Rathbun,Lawrence Livermore National Laboratory, Livermore, CA, USA; D.-J. Shim, E.Punch, Engineering Mechanics Corp of Columbus, Columbus, OH, USAPVP2013-97339: FINITE ELEMENT SIMULATION OF LASER WELDING IN AP91 STEEL PLATEK. A. Venkata, C. E. Truman, University of Bristol, Bristol, United KingdomSESSION 2.2F (CS-13-1)Tuesday, July 16, 10:30 am – 12:15 pm, Level -1, Louis Armstrong A+BHIGH TEMPERATURE CODES AND STANDARDSSponsored by the Codes & Standards and Materials & FabricationTechnical Committees

Developed by: C. M. Davies, Imperial College London, London, UnitedKingdom; N. Kasahara, The University of Tokyo, Tokyo, Bunkyo-ku, Japan; K. M. Nikbin, Imperial College London, London,United Kingdom; R. Ainsworth, Manchester University,Manchester, United Kingdom

Chair: C. M. Davies, Imperial College London, London, UnitedKingdom

Co-Chair D. W. Dean, EDF Energy, Gloucester, Gloucestershire, UnitedKingdom

PVP2013-98025: DETERMINING OPTIMUM TEMPERATURE CHANGESDURING HEATING OF PRESSURE VESSELS WITH HOLESJ. Taler, P. Dzierwa, D. Taler, Cracow University of Technology, Cracow,Malopolska, PolandPVP2013-98134: RECENT DEVELOPMENTS IN THE R5 VOLUME 2/3PROCEDURES FOR ASSESSING CREEP-FATIGUE INITIATION IN DEFECT-FREE COMPONENTS OPERATING AT HIGH TEMPERATURESD. W. Dean, M. W. Spindler, M. Chevalier, EDF Energy, Gloucester,Gloucestershire, United Kingdom; G. Smith, AMEC Technical Services,Warrington, Cheshire, United KingdomPVP2013-97690: APPLICATION OF THE CREEP ITALIAN STANDARDTHROUGH AN AUTOMATIC PROCEDURE AND COMPARISON WITH THEAMERICAN CODEO. Grisolia, INAIL, Sector of Research, Certification and Testing, Rome, Italy; L.Scano, Integrity Engineering - Studio Tecnico Scano, Udine, ItalyPVP2013-97744: INELASTIC DEFORMATION AND ELASTIC FOLLOW-UPY. Wang, D. Smith, C. E. Truman, University of Bristol, Bristol, United KingdomPVP2013-97865: DEVELOPMENT OF GUIDELINE FOR PREDICTION OFINELASTIC STRAIN FOR CREEP-FATIGUE EVALUATIONO. Watanabe, University of Tsukuba, Tsukuba, Japan; K. Kobayashi, ChibaUniversity, Chiba, Japan; K. Nakamura, Kawasaki Heavy Industries Ltd., Koto-ku, JapanSESSION 2.2G (DA-2-2)Tuesday, July 16, 10:30 am – 12:15 pm, Level -1, Louis Armstrong C+DDA-2-2 DESIGN & ANALYSIS OF PIPING & PIPING COMPONENTS IIDeveloped by: B. Li, AMEC NSS Ltd., Toronto, Canada; C. Basavaraju, US

Nuclear Regulatory Commission, Rockville, MD, USAChair: B. Li, AMEC NSS Ltd., Toronto, CanadaCo-Chair: C. Basavaraju, US Nuclear Regulatory Commission, Rockville,

MD, USAPVP2013-97218: BWR STEAM DRYER ISSUES AND LESSONS LEARNEDRELATED TO FLOW INDUCED VIBRATIONC. Basavaraju, US Nuclear Regulatory Commission, Rockville, MD, USA; K.Manoly, M. Murphy, W. Jessup, US Nuclear Regulatory Commission,Washington, DC, USAPVP2013-97226: ANALYSIS OF ASME CLASS 3 BURIED HDPE PIPING SYS-TEM RELATED TO CODE CASE N-755-1Y. S. Kim, Jung Kwang Yoon, Y. Ho Kim, KEPCO Engineering & Construction CoInc., Yongin-si, Gyeonggi-do, Korea (Republic)PVP2013-97220: STRESS INTENSIFICATION FACTORS FOR FABRICATEDLATERAL PIPING CONNECTIONSD. Mair, WorleyParsons, Hawthorn, Vic, AustraliaPVP2013-97512: PARAMETRIC STUDY OF THE COUPLING FACTOR FORTHE STATISTICAL ENERGY ANALYSIS OF PIPING ACOUSTIC VIBRATIONA. Dweib, Worley Parsons, Atyrau, KazakhstanSESSION 2.2H (NDE-2-1)Tuesday, July 16, 10:30 am – 12:15 pm, Level 0, Pont De Sully A+BRECENT DEVELOPMENTS IN NDE TECHNOLOGY—ISponsored by the ASME NDE Division and Materials & FabricationTechnical CommitteeDeveloped by: N. Tada, Okayama University, Okayama, JapanChair: N. Tada, Okayama University, Okayama, JapanCo-Chair R. Stakenborghs, Evisive, Inc.PVP2013-97523: RECENT PWAS-SHM DEVELOPMENTS IN THELABORATORY FOR ACTIVE MATERIALS AND SMART STRUCTURESV. Giurgiutiu, University of South Carolina, Columbia, SC, USA

29

PVP2013-97732: NON-DESTRUCTIVE DETECTION OF CRACK IN HDPEPLATE BY NANOMETRIC CHANGE IN SURFACE PROFILEN. Tada, M. Uchida, Y. Matsukawa, Okayama University, Okayama, JapanPVP2013-97818: DEVELOPMENT OF A RESIDUAL STRESS EVALUATIONTECHNIQUE BY THE COMBINED USE OF SURFACE STRAINMEASUREMENTS UNDER THE SPHERICAL INDENTATION METHODN. Ozawa, T. Yoshizawa, Hitachi Kyowa Engineering Co., Ltd., Hitachi, Ibaraki,Japan; Y. Watanabe, T. Shoji, Tohoku University, Sendai, Miyagi, JapanPVP2013-97688: ON-LINE MONITORING OF CRACKS IN PIPINGWELDMENT USING ARRAY PROBED DIRECT CURRENT POTENTIALDROPJ. Y. Yoon, Y. J. Kim, I. Hwang, Seoul National University, Seoul, Korea(Republic); L. Ayers, M. Short, L. Bromberg, G. Ballinger, MassachusettsInstitute of Technology, Cambridge, MA, USAPVP2013-97783: DEVELOPMENT OF AN EXPERT SYSTEM TOCHARACTERIZE WELD DEFECTS IDENTIFIED BY ULTRASONICD. Shahriari, École de Technologie Supérieure, Montreal, QC, Canada; A.Zolfaghari, Ferdowsi University of Mashhad, Mashhad, Iran; M. Jahazi, P.Bocher, École de Technologie Supérieure, Montreal, QC, CanadaSESSION 2.2J (SE-6-1)Tuesday, July 16, 10:30 am – 12:15 pm, Level 0, Pont De Arts BEUROPEAN RESEARCH ON STRUCTURAL SAFETY OF INDUSTRIALFACILITIES (INDUSE PROJECT)—SESSION 1Developed by: S. A. Karamanos, University of Thessaly, Volos, GreeceChair: S. A. Karamanos, University of Thessaly, Volos, GreeceCo-Chair O. S. Bursi, University of Trento, Trento, TN, ItalyPVP2013-97430: EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ONNOZZLE REINFORCEMENTSM. Wieschollek, B. Hoffmeister, M. Feldmann, RWTH Aachen University,Aachen, GermanyPVP2013-97894: PRESSURIZED FLANGED JOINTS SUBJECTED TOBENDING CYCLIC LOADING—FINITE ELEMENT ANALYSESJ. Ferino, Centro Sviluppo Materiali S.p.A., Pula, Italy; A. Lucci, G. Demofonti,Centro Sviluppo Materiali S.p.A., Rome, ItalyPVP2013-97626: EXPERIMENTAL AND NUMERICAL INVESTIGATION OFPIPE TEE JUNCTIONS UNDER STRONG CYCLIC LOADINGT. Papatheocharis, University of Thessaly, Volos, Greece; K. Diamanti, EBETAMS.A. (MIRTEC), Volos, Greece; G. E. Varelis, P.C. Perdikaris, S. Karamanos,University of Thessaly, Volos, GreecePVP2013-97903: LOW CYCLE FATIGUE TESTS AND SIMULATIONS ONSTEEL ELBOWSP. Pappa, G. E. Varelis, S. Karamanos, University of Thessaly, Volos, Greece; A.M. Gresnigt, Delft University of Technology, Berkel en Rodenrijs, Zuid-Holland,NetherlandsPVP2013-97977: EXPERIMENTAL AND NUMERICAL INVESTIGATION OFPRESSURIZED PIPE ELBOWS UNDER STRONG CYCLIC LOADINGCONDITIONSG. E. Varelis, University of Thessaly, Volos, Greece; J. Ferino, Centro SviluppoMateriali S.p.A., Pula, Italy; S. Karamanos, University of Thessaly, Volos,Greece; A. Lucci, G. Demofonti, Centro Sviluppo Materiali S.p.A., Rome, ItalySESSION 2.2K (OAC-1-2)Tuesday, July 16, 10:30 am – 12:15 pm, Level 0, Pont De Arts CSAFETY, RELIABILITY AND RISK ASSESSMENT FOR NON-NUCLEARAPPLICATIONSSymposium of Safety, Reliability and Risk Assessment – Co-Sponsored byComputer Technology & Bolted Joints, Materials & Fabrication, OperationsApplications & Components, Design and Analysis, and Codes & StandardsTechnical CommitteesDeveloped by: A. Reich, Streamline Automation LLC, Huntsville, AL, USAChair: C.-C. Huang, Institue of Nuclear Energy Research, Taoyuan,

TaiwanCo-Chair D. Demoss, Sargent & Lundy, LLC, Barrington, IL, USAPVP2013-97408: STUDY ON THE SAFETY MANAGEMENT SYSTEM BASEDON RBI METHOD FOR STORAGE TANKY. Yu, C. Ye, L. Hua, B. Liang, Nanjing Boiler & Pressure Vessel Supervision and

Inspection Institute, Nanjing, Jiangsu, ChinaPVP2013-97198: FFS ASSESSMENT FOR MATERIAL DEGRADATION DUETO FIRE DAMAGE OF PRESSURE EQUIPMENTT. Kikuchi, IDEMITSU, Chiba, Japan; T. Kurihara, Asahi Kasei EngineeringCorporation, Kawasaki, Japan; T. Nishikawa, Showa Dennko K.K., Kawasaki,Japan; T. Fujishiro, Maruzen Petrochemical Co., Ltd., Ichihara, Japan; S.Nagata, Toyo Engineering Corporation, Chiba, Japan; H. Murata, FIJI Oil,Sodegaura, JapanPVP2013-97925: RESEARCH ON THE TEMPERATURE MODEL OF CNGCYLINDERS FOR VEHICLE DURING BONFIRE TESTH. Ma, W. Xu, Q. Li, X Luo, Shanghai Institute of Special Equipment Inspectionand Technical Research, Shanghai, Shanghai, ChinaPVP2013-97019: COMBINED CYCLE POWER PLANT EXPANSION JOINTFAILUREA. Reich, Streamline Automation LLC, Huntsville, AL, USASESSION 2.2L (CT-6-1)Tuesday, July 16, 10:30 am – 12:15 pm, Level 2, St. MichelELEVATED TEMPERATURE BEHAVIOR OF BOLTED JOINTSDeveloped by: J. Veiga, Teadit Industria e Comercio Ltda, Rio de Janeiro,

BrazilChair: S. Nassar, Oakland University, Rochester, MI, USACo-Chair A. Bausman, VSP Technologies, Kingspoint, TN, USAPVP2013-97156: EVALUATION OF THERMAL AND MECHANICALBEHAVIORS OF BOLTED JOINTS MADE OF TITANIUM AND TITANIUMALLOY AND ITS APPLICATION TO ROBUST JOINT DESIGNT. Fukuoka, M. Nomura, Y. Takasugi, Kobe University, Kobe, JapanPVP2013-97484: BEHAVIOR OF FLANGE JOINTS UNDER COMBINEDINTERNAL PRESSURE AND THERMAL LOADING: THE CASE OF USINGMETAL-TO-METAL CONTACT TYPE GASKETSK. Ma, Y. Zhang, L. Zhang, K. Guan, East China University of Science andTechnology, Shanghai, ChinaPVP2013-97551: ON THE HOT BLOW-OUT CHARACTERIZATION OF PTFE-BASED GASKET MATERIALSH. A. Bouzid, S. Benabdallah, École de Technologie Supérieure, Montreal, QC,CanadaPVP2013-97730: BEHAVIOR OF BOLT FORCE CHANGES OF FLANGEDCONNECTIONS UNDER THERMAL LOADINGM. Hiratsuka, NICHIAS Corporation, Minato-ku, Tokyo, Japan; T. Kobayashi,Numazu College of Technology, Numazu, Shizuoka, Japan; K. Nishiura,Mitsubishi Chemical Corporation, Kurashiki, Okayama, Japan; K. Itoi, NICHIASCorporation, Hamamatsu, Shizuoka, JapanPVP2013-97553: MATHEMATICAL EXPRESSIONS OF HELICAL THREADGEOMETRY AND CROSS SECTIONAL AREAS OF VARIOUS SHAPEDTHREAD FORMS AND FINITE ELEMENT ANALYSISK. Yanase, T. Fukuoka, Kobe University, Kobe, JapanSESSION 2.2M (DA-8-1)Tuesday, July 16, 10:30 am – 12:15 pm, Level 2, St. Germain Des Pres A+BFITNESS FOR SERVICE 1Symposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: T. G. Seipp, Becht Engineering Canada, Ltd., Calgary, AB,

Canada; C. Rodery, BP Corporation North America, Inc.,League City, TX, USA

Chair: T. G. Seipp, Becht Engineering Canada, Ltd., Calgary, AB,Canada

Co-Chair: C. Rodery, BP Corporation North America, Inc., League City,TX, USA

PVP2013-97276: FRACTURE INTEGRITY ASSESSMENT OF FLAWED BI-METALLIC GIRTH WELD JOINTN. Bonora, University of Cassino and Southern Lazio, Cassino, Italy; A. Carlucci,SAIPEM SA, Paris, France; A. Ruggiero, University of Cassino and SouthernLazio, Cassino, Italy; G. Iannitti, Techdyn Engineering, Rome, ItalyPVP2013-97083: A LEFM BASED STUDY ON THE INTERACTION BETWEENAN EDGE AND AN EMBEDDED PARALLEL CRACK

30

Q. Ma, Walla Walla University, College Place, WA, USA; C. Levy, FloridaInternational University, Miami, FL, USA; M. Perl, Ben Gurion University of theNegev, Beer Sheva, IsraelPVP2013-97116: DAMAGE-BASED MODELING AND ANALYSIS OFREACTOR VESSELS WITH NUMEROUS BASE METAL ULTRASONICINDICATIONSJ. Y. R. Rashid, ANATECH, San Diego, USA; T. Hardin, Electric Power ResearchInstitute, Palo Alto, CA, USA; M. M. Rashid, University of California Davis, Davis,CA, USA; R. Dunham, K. Kubischta, ANATECH, San Diego, CA, USASESSION 2.2N (FSI-2-5)Tuesday, July 16, 10:30 am – 12:15 pm, Level 3, Le Parc Montsouris AFIV IN HEAT EXCHANGER TUBE ARRAYSDeveloped by: M. Hassan, University of Guelph, Guelph, ON, Canada; S.

Etienne, Ecole Polytechnique de Montreal, Montreal, QC,Canada

Chair: M. Hassan, University of Guelph, Guelph, ON, CanadaCo-Chair N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,

CanadaPVP2013-97437: A METHOD FOR EXTRACTING THE TIME DELAY FROMTHE UNSTEADY AND QUASI-STEADY FLUIDELASTIC FORCES IN TWO-PHASE FLOWT. Sawadogo, N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,CanadaPVP2013-97647: ON THE LIFT DERIVATIVE COEFFICIENT FOR TUBEBUNDLE FLUIDELASTIC INSTABILITY QUASI-STEADY MODELC. Charreton, C. Beguin, K. R. Yu, S. Etienne, N. Mureithi, Ecole Polytechniquede Montreal, Montreal, QC, CanadaPVP2013-97111: STUDY ON IN-FLOW FLUIDELASTIC INSTABILITY OFCIRCULAR CYLINDERS CAUSED BY AIR CROSS FLOWT. Nakamura, Y. Fujita, T. Sumitani, S. Hagiwara, Osaka Sangyo University,Daito, Osaka, JapanPVP2013-97163: INVESTIGATION ON IN-FLOW FLUIDELASTICINSTABILITY OF AN ARRAY OF TUBESK. Hirota, H. Morita, J. Hirai, A. Iwasaki, S. Utsumi, K. Shimamura, R. Kawakami,Mitsubishi Heavy Industries, Ltd., Hyogo-pref, JapanSESSION 2.2O (MF-5-2)Tuesday, July 16, 10:30 am – 12:15 pm, Level 3, Le Parc Montsouris BEUROPEAN PROGRAMS IN STRUCTURAL INTEGRITY—IIDeveloped by: D. Moinereau, Electricite de France, Moret sur Loing, France; P.

James, AMEC Clean Energy Europe, Warrington, Cheshire,United Kingdom; T. Nicak, E. Keim, AREVA NP GmbH,Erlangen, Germany

Chair: D. Moinereau, Electricite de France, Moret sur Loing, FranceCo-Chair T. Nicak, AREVA GmbH, Erlangen, GermanyPVP2013-97382: SYNTHESIS OF THE NESC VII EUROPEAN PROJECT:DEMONSTRATION OF WARM PRE STRESSING EFFECT IN BIAXIAL LOAD-ING CONDITIONSC. Jacquemoud, T. Yuritzinn, S. Marie, CEA, Gif sur Yvette, France; S. Chapuliot,AREVA, Paris, France; D. Moinereau, Electricite de France, Moret sur Loing,France; M. Nedelec, IRSN, Fontenay-aux-Roses, FrancePVP2013-97383: LOADING CONDITIONS LIKELY TO MODIFY THE BENE-FITS OF THE WARM PRE STRESSING EFFECTC. Jacquemoud, CEA, Gif-sur-Yvette, France; M. Nedelec, IRSN, Fontenay-aux-Roses, FrancePVP2013-97509: PREDICTIONS OF FRACTURE TOUGHNESS FOR WELDMATERIAL WHEN ADOPTING A NOVEL PARTICLE FAILURE CRITERIONAND A MEASURED, EXPERIMENTAL PARTICLE DISTRIBUTIONP. James, AMEC Clean Energy Europe, Warrington, Cheshire, United Kingdom;M. Ford, AMEC TS, Warrington, Cheshire, United Kingdom; A. Jivkov, TheUniversity of Manchester, Manchester, United KingdomPVP2013-97574: EC FP7 STRUCTURAL PERFORMANCE OF MULTI-METALCOMPONENT: PROJECT OVERVIEWP. Karjalainen-Roikonen, Technical Research Centre of Finland, Espoo, Finland;E. Keim, AREVA NP GmbH, Erlangen, Germany; P. Gilles, Areva NP, Paris,France; S. Blasset, AREVA NP GmbH, Erlangen, Germany

PVP2013-97954: CRACK ARREST TEST RESULTS OF UNIRRADIATED ANDIRRADIATED GERMAN RPV STEELSF. Obermeier, J. Barthelmes, E. Keim, H. Hein, H. Schnabel, M. Kaiser, AREVANP GmbH, Erlangen, GermanySESSION 2.2S (CT-15-2)Tuesday, July 16, 10:30 am – 12:15 pm, Level 0, Foyer La SeineSOFTWARE DEMONSTRATION FORUM IIDeveloped by: J. F. Cory Jr., Siemens PLM Software, Milford, USAChair: J. F. Cory Jr., Siemens PLM Software, Milford, USA

no textBlock 2.3: Tuesday, July 16 (2:00 pm – 3:45 pm)

no textSESSION 2.3A (MF-25-1)Tuesday, July 16, 2:00 pm – 3:45 pm, Level -1, Ella Fitzgerald BCOMPOSITE PRESSURE VESSELSSymposium of Plastics and Composites—Co-Sponsored by Design &Analysis, Materials & Fabrication, High Pressure Technology, and Codes &Standards Technical CommitteesDeveloped by: H. Faria, INEGI, Porto, PortugalChair: P. Mertiny, University of Alberta, Edmonton, CanadaCo-Chair A. T. Marques, Universidade do Porto, Porto, PortugalPVP2013-97907: APPLICABILITY OF OPTICAL FIBRE BRAGG GRATINGSENSORS IN THE STRUCTURAL HEALTH MONITORING OF COMPOSITEOVERWRAPPED PRESSURE VESSELSG. Pereira, H. Faria, J. Figueiredo, INEGI, Porto, Portugal; A. T. Marques,Universidade do Porto, Porto, PortugalPVP2013-97916: OVERVIEW ON COMPRESSED GAS STORAGE: MATERI-ALS ISSUES AND CHALLENGES FOR COMPOSITE CYLINDERS IN THEFIELD, WITH THE INDUSTRIAL VISION (Presentation Only)F. Barbier, M. Weber, Air Liquide, Les Loges en Josas, France; C. Devilliers, AirLiquide - Claude Delorme Research Center, Jouy-en-Josas, FrancePVP2013-97952: INFLUENCE OF FIBER SLIPPAGE COEFFICIENT DISTRI-BUTIONS ON THE GEOMETRY AND PERFORMANCE OF COMPOSITEPRESSURE VESSELSL. Zu, Xi’an University of Technology, Xi’an, Shaanxi, China; S. Koussios, A.Beukers, Delft University of Technology, Delft, NetherlandsSESSION 2.3B (SPC-1-6)Tuesday, July 16, 2:00 pm – 3:45 pm, Level -1, Ella Fitzgerald ASTUDENT PAPER SYMPOSIUM IIDeveloped by: Y. W. Kwon, Naval Postgraduate School, Monterey, CA, USA;

R. S. Hafner, Lawrence Livermore National Laboratory,Livermore, CA, USA; Y. Shoji, Shoji Technology Consulting,Musashino, Tokyo, Japan

Chair: S. Leen, NUI Galway, Galway, IrelandPVP2013-97110: INTERACTION AND ASSESSMENT OF MULTIPLE LOCALWALL THINNING DEFECTSJ. Peng, C. Zhou, Q. Dai, Nanjing University of Technology, Nanjing, JiangsuProvince, ChinaPVP2013-97409: EXPERIMENTAL STUDY OF TWO-PHASE FLOW INDUCEDBY CAVITATION THROUGH A SAFETY RELIEF VALVEJ. Pinho, P. Rambaud, von Karman for Fluid Dynamics Institute, Brussels,Belgium; S. Chabane, Centre Technique des Industries Mécaniques, Nantes,FrancePVP2013-97624: MEASUREMENT OF ELASTIC FOLLOW-UP FORCOMBINED APPLIED AND RESIDUAL STRESSESG. Horne, M. J. Peel, D. Smith, University of Bristol, Bristol, United KingdomPVP2013-97887: APPLICATION OF SURFACE ROUGHNESS PARAMETERSTO THE EVALUATION OF LOW CYCLE FATIGUE DAMAGE IN AUSTENITICSTAINLESS STEELN. Fujimura, T. Nakamura, H. Oguma, Hokkaido University, Sapporo, Hokkaido,JapanPVP2013-97363: APPLICABILITY OF FFS ASSESSMENT USING PARTIALSAFETY FACTORS EVALUATED BY INFINITE PLATE

31

Q. Qu, S. Izumi, S. Sakai, University of Tokyo, Tokyo, JapanSESSION 2.3C (MF-11-1)Tuesday, July 16, 2:00 pm – 3:45 pm, Level -1, Miles Davis CINTEGRITY ISSUES IN SCC AND CORROSION FATIGUE—1Developed by: M. Mochizuki, Osaka University, Osaka, Japan; Z. Wei, Tenneco

Inc., Grass Lake, MI, USAChair: K. M. Nikbin, Imperial College London, London, United KingdomCo-Chair S. E. Eren, TWI Ltd. (formerly Imperial College London),

Cambridge, United KingdomPVP2013-97127: EFFECTS OF STRESS ON PITTING CORROSIONBEHAVIOR OF LOW-CARBON STEELH. Cao, H. Zhang, Shandong Special Equipment Inspection Institute, Jinan,Shandong, China; X. Qiu, China University of Petroleum, Qingdao, ChinaPVP2013-97139: AN APPROACH TO MODEL ABSTRACTION OF STRESSCORROSION CRACKING DAMAGE IN MANAGEMENT OF SPENTNUCLEAR FUEL AND HIGH-LEVEL WASTET. M. Ahn, U.S. Nuclear Regulatory Commission, Washington, D.C., USAPVP2013-97633: A NEW GENERALIZED NONLINEAR SUPERPOSITIONTHEORY AND ITS APPLICATIONS IN MODELING CORROSION-FATIGUEZ. Wei, Limin Luo, Tenneco, Grass Lake, MI, USA; M. Rybarz, Tenneco, Rybnik,Poland; K. M. Nikbin, Imperial College London, London, United KingdomPVP2013-97703: INITIATION OF PWSCC IN NICKEL-BASE ALLOYS 182M. Wehbi, T. Couvant, Edf R&d, Moret sur Loing, France; J. Crépin, C. Duhamel,Mines ParisTech, Centre des Matériaux, CNRS UMR 7633, Evry, FranceSESSION 2.3D (FSI-3-1)Tuesday, July 16, 2:00 pm – 3:45 pm, Level -1, Miles Davis B17TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGY FORFLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS—FLUID-STRUCTURE INTERACTION AND PLANT COMPONENTSDeveloped by: K. Inaba, Tokyo Institute of Technology, Tokyo, Japan; H. Iyama,

Kumamoto National College of Technology, Yatsushiro-gun,Kumamoto, Japan

Chair: G. Papadakis, Imperial College London, London, UnitedKingdom

Co-Chair C. Giannopapa, Eindhoven University of Technology,Eindhoven, Netherlands

PVP2013-97104: EXPERIMENTAL INVESTIGATION OF PULSATILE FLOWTHROUGH PROSTHETIC HEART VALVESO. Barannyk, University of Victoria, Victoria, BC, Canada; S. Karri, ViVitro Labs,Inc., Victoria, BC, Canada; P. Oshkai, University of Victoria, Victoria, BC, CanadaPVP2013-97105: IN VITRO STUDY OF THE INFLUENCE OF THE AORTICROOT GEOMETRY ON FLOW CHARACTERISTICS OF A PROSTHETICHEART VALVEO. Barannyk, University of Victoria, Victoria, BC, Canada; S. Karri, ViVitro Labs,Inc., Victoria, BC, Canada; P. Oshkai, University of Victoria, Victoria, BC, CanadaPVP2013-97150: NUMERICAL METHOD TO PROVIDE CAVITATION INDEXFOR CONTROL VALVESS. Malavasi, M. Rossi, G. Ferrarese, G. Messa, Politecnico di Milano, Milano,ItalyPVP2013-97737: SOLID-LIQUID FLOW THROUGH A WELLHEAD CHOKEVALVES. Malavasi, G. Messa, G. Ferrarese, Politecnico di Milano, Milano, ItalyPVP2013-97829: PRODUCTION AND EVALUATION OF PRESSURE VESSELFOR HIGHLY EFFECTIVE RICE POWDER MANUFACTURING USINGUNDERWATER SHOCK WAVEK. Shimojima, Y. Higa, O. Higa, K. Higa, A. Takemoto, S. Itoh, Okinawa NationalCollege of Technology, Okinawa, JapanSESSION 2.3E (MF-4-6)Tuesday, July 16, 2:00 pm – 3:45 pm, Level -1, Miles Davis AFINITE ELEMENT MODELING OF RESIDUAL STRESS IN THICK COMPO-NENTSDeveloped by: M. Mochizuki, Osaka University, Osaka, JapanChair: C. E. Truman, University of Bristol, Bristol, United KingdomCo-Chair J. Katsuyama, Japan Atomic Energy Agency, Ibaraki, Japan

PVP2013-97239: A TIME-SAVING METHOD TO COMPUTE MULTI-PASSWELD RESIDUAL STRESSESL. Depradeux, EC2-Modélisation, Villeurbanne, France; F. Rossillon, EDFSEPTEN, Villeurbanne, FrancePVP2013-97453: FINITE ELEMENT ANALYSIS OF WELDING RESIDUALSTRESS OF THE ULTRA-THICK 13MNNIMOR STEEL CYLINDER OF ALARGE EO REACTOR MADE IN CHINAY. Wen, J. Gong, L. Geng, Y. Wang, Nanjing University of Technology, Nanjing,Jiangsu Province, China; S. T. Tu, East China University of Sci & Tech,Shanghai, ChinaPVP2013-97458: ESTIMATION OF WELD INDUCED RESIDUAL STRESSESOF THICK WELDED SECTION USING NUMERICAL WELDING SIMULATIONY. Gooroochurn, S. Cooreman, P. Thibaux, J. Antonissen, OCAS N.V., Zelzate,East Flanders, BelgiumPVP2013-98019: RESIDUAL STRESS MODELLING IN A THICK-SECTIONEDFERRITIC ELECTRON BEAM WELDB. Pellereau, Rolls-Royce Group, PLC, Derby, United Kingdom; P. Hurrell, C. M.Gill, Rolls-Royce Marine, Derby, United Kingdom; Ed Kingston, Veqter Limited,Bristol, United KingdomPVP2013-98170: NUMERICAL SIMULATION OF HOT CRACKING TESTSO. Asserin, M. Le, L. Forest, CEA, DEN, DM2S, SEMT, LTA, Gif-sur-Yvette,France; O. Fandeur, CEA, DEN, DM2S, SEMT, LM2S, Gif-sur-Yvette, France; P.Pilvin, Université de Bretagne-Sud, Lorient, FranceSESSION 2.3F (CS-13-2)Tuesday, July 16, 2:00 pm – 3:45 pm, Level -1, Louis Armstrong A+BDEVELOPMENTS IN HIGH TEMPERATURE CODES AND STANDARDSDeveloped by: K. M. Nikbin, C. M. Davies, Imperial College London, London,

United Kingdom; R. Ainsworth, Manchester University,Manchester, United Kingdom

Chair: Y. J. Kim, Korea University, Seoul, Korea (Republic)Co-Chair P. Budden, EDF Energy, Gloucester, United KingdomPVP2013-97625: COMPARISON OF EXISTING CREEP-FATIGUE DAMAGEASSESSMENT METHODOLOGIESM. Sheridan, D. Knowles, O. Montgomery, Atkins, Bristol, United KingdomPVP2013-98129: ELASTIC-PLASTIC J ESTIMATION FORCIRCUMFERENTIALLY CRACKED PIPES—UNDER COMBINEDMECHANICAL AND THERMAL LOADINGSC.-Y. Oh, Y. J. Kim, Korea University, Seoul, Korea (Republic); R. Ainsworth,Manchester University, Manchester, United KingdomPVP2013-98059: SEVERE ACCIDENT CONDITION MODELING IN PWRENVIRONMENT: CREEP RUPTURE MODELINGF. W. Brust, Engineering Mechanics Corp of Columbus, Columbus, OH, USA; R.Iyengar, M. Benson, US Nuclear Regulatory Commission, Rockville, MD, USA;H. Rathbun, Lawrence Livermore National Laboratory, Livermore, CA, USAPVP2013-97815: INVESTIGATIONS ON CREEP BEHAVIOR OF P91-TYPESTEEL USING COMBINED CREEP DAMAGE MODELF. Liu, P. Tang, Zhejiang Provincial Special Equipment Inspection and ResearchInstitute, Hangzhou, Zhejiang, China; Z. Ling, Zhejiang University, Hangzhou,Zhejiang, China; M. Zheng, Northeast Petroleum University, Hangzhou,Zhejiang, China; L. Zhao, S. Kong, East China University of Science andTechnology, Hangzhou, Zhejiang, ChinaPVP2013-97412: STUDY ON THE PROPERTIES OF T91/12CR1MOV DISSIM-ILAR WELDED JOINTSG. Zhu, Ningbo Special Equipment Inspection Institute, Ningbo, China; Y. Jiang,J. Gong, Nanjing University of Technology, Nanjing, China; H. Chen, NingboSpecial Equipment Inspection Institute, Ningbo, China; G. Wei, BASF-YPCCompany Limited, Nanjing, ChinaSESSION 2.3G (DA-2-3)Tuesday, July 16, 2:00 pm – 3:45 pm, Level -1, Louis Armstrong C+DDA-2-3 DESIGN & ANALYSIS OF PIPING & PIPING COMPONENTS IIIDeveloped by: C. Basavaraju, US Nuclear Regulatory Commission, Rockville,

MD, USA; B. Li, AMEC NSS Ltd., Toronto, Canada; N. Zobeiry,Hatch, Mississauga, Canada; A. Dweib, Worley Parsons,Atyrau, Kazakhstan

Chair: A. Dweib, Worley Parsons, Atyrau, Kazakhstan

32

Co-Chair: B. Li, AMEC NSS Ltd., Toronto, CanadaPVP2013-97599: AIV EVALUATION WITH SOUND PRESSURE ANDFABRICATION QUALITY STANDARDSJ. A. Mann III, A. C. Fagerlund, D. Eilers, Emerson Process Management,Marshalltown, IA, USAPVP2013-97619: DEFORMATION OF A PIPE BEND AS AN ELEMENT OF APIPING SYSTEM UNDER HARMONIC LOADINGA. Batura, I. Orynyak, S. Radchenko, M. Borodii, IPP-Centre Ltd., Kyiv, UkrainePVP2013-97622: A REVIEW OF ANALYTICAL AND FINITE ELEMENT BASEDSOLUTIONS FOR EVALUATING LOCAL STRESSES AT PIPE SUPPORTSA. Bhattacharya, Chicago Bridge and Iron Company UK Ltd., London, UnitedKingdomPVP2013-97638: CONCEPTUAL DESIGN OF A SPIRAL WOUND PIPELINEWITH MANUFACTURED RESIDUAL STRESSESC. Scott, S. Finneran, DNV Columbus, Dublin, OH, USASESSION 2.3H (NDE-4-1)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 0, Pont De Sully A+BPLANT INSPECTION ISSUESSponsored by the ASME NDE Division and the PVP Operations,Applications & Components and Materials & Fabrication and Codes &Standards Technical CommitteesDeveloped by: W. T. Springer, University of Arkansas, Fayetteville, AR, USAChair: M. Carte, OlympusNDT, Houston, TX, USACo-Chair R. Stakenborghs, Evisive, Inc.PVP2013-97256: ANALYSIS OF CORROSION AREAS IN TRANSMISSIONLINES USING GUIDED WAVE PROPAGATION: NUMERICAL SIMULATIONSAND EXPERIMENTAL TESTSF. Turcu, F. Bertoncini, University of Pisa, Pisa, Italy; G. Giunta, eni S.p.A.—Gas& Power Division, San Donato Milanese, Italy; M. Raugi, University of Pisa, Pisa,ItalyPVP2013-97307: REACTOR PRESSURE VESSEL NOZZLE INNER-RADIUSEXAMINATION ADVANCEMENTSS. W. Glass, AREVA, Lynchburg, VA, USA; G. Guse, AREVA NDESolutions/IntelligeNDT, Erlangen, Germany; E. Brau, AREVA NDESolutions/Intercontrole, St Paul Les Durances, Cadarache, France; B. Thigpen,AREVA, Charlotte, NC, USAPVP2013-97175: IMPROVEMENT OF RELIABILITY ASSESSMENT OF GASPIPELINE USING ACOUSTIC EMISSION TECHNIQUEG. Giunta, eni S.p.A.—Gas & Power Division, San Donato Milanese, Italy; S.Budano, A. Lucci, Centro Sviluppo Materiali SpA, Rome, Italy; L. Prandi, eniSpA, Gas & Power Division, San Donato Milanese, Italy; R. Piancaldini, CentroSviluppo Materiali SpA, Rome, ItalyPVP2013-97204: ACCURATE MONITORING OF PIPE AND STRUCTURAL—VIBRATIONS BY REMOTE RADAR OBSERVATIONSA. M. Guarnieri, Politecnico di Milano, Milano, MI, Italy; G. Giunta, eni S.p.A.—Gas & Power Division, San Donato Milanese, Italy; D. D’Aria, F. Speziali, Aresyssrl, Milano, ItalyPVP2013-97281: ADVANCED PIPELINE VIBROACOUSTIC MONITORINGG. Giunta, eni S.p.A.—Gas & Power Division, San Donato Milanese, Italy; G.Bernasconi, S. Del Giudice, Politecnico di Milano, Dipartimento di Elettronica eInformazione, Milano, Italy; F. Dionigi, eni S.p.A.—Gas & Power Division, SanDonato Milanese, ItalySESSION 2.3J (SE-6-2)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 0, Pont De Arts BEUROPEAN RESEARCH ON STRUCTURAL SAFETY OF INDUSTRIALFACILITIES (INDUSE PROJECT)—SESSION 2Developed by: S. A. Karamanos, University of Thessaly, Volos, GreeceChair: A. M. Gresnigt, Delft University of Technology, Berkel en

Rodenrijs, Zuid-Holland, NetherlandsCo-Chair B. Hoffmeister, RWTH Aachen University, Aachen, GermanyPVP2013-97441: PSEUDO-DYNAMIC HETEROGENEOUS TESTING WITHDYNAMIC SUBSTRUCTURING OF A PIPING SYSTEM UNDER EARTH-QUAKE LOADINGM. S. Reza, O. S. Bursi, G. Abbiati, A. Bonelli, University of Trento, Trento, TN,Italy

PVP2013-97435: GUIDELINES FOR SEISMIC DESIGN AND ANALYSIS OFPRESSURE VESSELSM. Wieschollek, RWTH Aachen University, Aachen, Germany; K. Diamanti, EBE-TAM S.A. (MIRTEC), Volos, Greece; M. Pinkawa, B. Hoffmeister, M. Feldmann,RWTH Aachen University, Aachen, GermanyPVP2013-97642: MAIN ISSUES ON THE SEISMIC DESIGN OF INDUSTRIALPIPING SYSTEMS AND COMPONENTSF. Paolacci, University of Roma Tre, Rome, Rome, Italy; M. S. Reza, O. S. Bursi,University of Trento, Trento, TN, Italy; A. M. Gresnigt, Delft University ofTechnology, Berkel en Rodenrijs, Zuid-Holland, Netherlands; A. Kumar,University of Trento, Trento, TN, ItalyPVP2013-97700: SEISMIC RESPONSE OF UNANCHORED LIQUIDSTORAGE TANKSM. Vathi, P. Pappa, S. Karamanos, University of Thessaly, Volos, GreeceSESSION 2.3K (CS-15-1)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 0, Pont De Arts CPROBABILISTIC AND RISK BASED ASSESSMENT FOR CODES ANDSTANDARDSSymposium of Safety, Reliability and Risk Assessment – Co-Sponsored byComputer Technology & Bolted Joints, Materials & Fabrication, OperationsApplications & Components, Design and Analysis, and Codes & StandardsTechnical CommitteesDeveloped by: C. Xuedong, Hefei Gen Machinery Rsch Inst, Hefei 230031,

Anhui, ChinaChair: W. Guan, Hefei General Machinery Research Institute, Hefei,

Anhui Province, ChinaCo-Chair J. Zhu, Hefei General Machinery Research Institute, Hefei,

Anhui Province, ChinaPVP2013-97124: DEVELOPMENT OF ULTIMATE STRENGTH EVALUATIONMETHOD FOR PIPING SUBJECTED TO SEISMIC LOADSH. Machida, TEPCO Systems Corporation, Eitai Kotoku, Japan; T. Yamazaki,Japan Nuclear Technology Inst, Tokyo, Japan; H. Chitose, TEPCO SystemsCorporation, Tokyo, JapanPVP2013-97303: RELIABILITY ANALYSIS OF SPRING OPERATEDPRESSURE RELIEF VALVES. Bao, Z. Li, L. Luo, Z. Gao, Zhejiang University of Technology, Hangzhou,Zhejiang, ChinaPVP2013-97935: CANDU OWNERS GROUP RISK-INFORMED IN-SERVICEINSPECTION (RI-ISI) PROJECTP. O’Regan, Electric Power Research Institute, Hopkinton, MA, USA; M. Rezaie-Manesh, Ontario Power Generation, Pickering, ON, Canada; S. Chesworth,Structural Integrity Associates, Inc., San Jose, CA, USA; P. Lafreniere, CanduOwners Group, Toronto, ON, CanadaPVP2013-97380: APPLICATION OF IMPROVED KENTS PIPELINE RISKSCORING METHOD BASED ON FUZZY MATHEMATICS IN THE RISKASSESSMENT OF EMBEDDED PETROLEUM PIPELINEC. Ye, Y. Zhi, X. Fang, P. Jiang, Nanjing Boiler & Pressure Vessel InspectionInstitute, Nanjing, Jiangsu, ChinaSESSION 2.3L (OAC-3-1)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 2, St. MichelMONITORING, DIAGNOSTICS AND INSPECTIONDeveloped by: M. Brumovsky, UJV a.s., Rez, Czech Republic; I. Ezekoye,

Westinghouse Electric Company, Cranberry Woods, PA, USAChair: M. Brumovsky, UJV a.s., Rez, Czech RepublicCo-Chair: I. Ezekoye, Westinghouse Electric Company, Cranberry Woods,

PA, USAPVP2013-97332: DETECTION OF WALL-THINNING DEFECT IN NUCLEARPIPING COMPONENTS USING AN ADVANCED INFRAREDTHERMOGRAPHY (IRT) TECHNIQUEK. J. Weon, K. W. Yun, H. C. Jung, Chosun University, Gwangju, Korea(Republic)PVP2013-97240: AN ENHANCED METHODOLOGY FOR ESTIMATING THENATURAL FREQUENCY OF VALVES USING RALEIGH’S ENERGYPRINCIPLEI. Ezekoye, Westinghouse Electric Company, Cranberry Woods, PA, USA; R. S.

33

Farrell, Flowserve, Raleigh, NC, USA; P. A. Vock, Westinghouse Electric Co,Cranberry Township, PA, USA; R. J. Gradle, Flowserve, Raleigh, NC, USAPVP2013-97324: STUDY ON THE RELIEF CAPACITY AND SAFETYINTEGRITY OF MULTIPLE RELIEF VALVES OF CHARGE GAS PIPE INETHYLENE-CRACKING PLANTJ. Zhu, C. Xuedong, Y. Lu, Z. Ai, W. Guan, Hefei General Machinery ResearchInstitute, Hefei, Anhui Province, ChinaSESSION 2.3M (DA-8-2)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 2, St. Germain Des Pres A+BFITNESS FOR SERVICE 2Symposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: M. Zhao, Chevron, Houston, TX, USAChair: C. Rodery, BP Corporation North America, Inc., League City,

TX, USACo-Chair T. G. Seipp, Becht Engineering Canada, Ltd., Calgary, AB,

CanadaPVP2013-97084: COMPARISON OF THE LIMIT LOADS BETWEEN DEFECT-ED PRESSURE PIPES WITH AN INTERNAL PIT AND AN EXTERNAL PIT ATHIGH TEMPERATUREC. Zhou, B. Wang, Z. Sun, J. Xue, X. He, Nanjing University of Technology,Nanjing, Jiangsu, ChinaPVP2013-97713: STUDY OF PROLONGED SERVICE DEGRADATION OFSUPERHEATER TUBES AND ITS EFFECTS ON REMAINING LIFEPREDICTIONSK. A. Al-Obaidi, SABIC, Jubail Industrial, Saudi Arabia; N. Merah, King FahdUniversity of Petroleum &, Dhahran, Saudi ArabiaPVP2013-98048: ANALYSIS OF THE STRESS BASIS TO USE FOR CREEPEVALUATION OF PIPELINES IN FITNESS-FOR-SERVICE ASSESSMENTSL. Scano, Integrity Engineering - Studio Tecnico Scano, Udine, ItalySESSION 2.3N (FSI-2-6)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 3, Le Parc Montsouris APIPING VIBRATIONS AND ACOUSTICS IIDeveloped by: N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,

Canada; A. Mohany, University of Ontario Institute ofTechnology, Oshawa, ON, Canada

Chair: S. Belfroid, TNO, Delft, NetherlandsCo-Chair K. Ishihara, Tokushima Bunri University, Takamatsu, JapanPVP2013-97149: EFFECT OF UPSTREAM EDGE GEOMETRY ON THETRAPPED MODE RESONANCE OF DUCTED CAVITIESM. Bolduc, M. Elsayed, McMaster University, Hamilton, ON, Canada; S. R.Ziada, McMaster University, Hamilton, ON, CanadaPVP2013-97273: A LINEAR MODEL FOR THE ONSET OF WHISTLING INCORRUGATED PIPE SEGMENTS: INFLUENCE OF GEOMETRYO. Rudenko, D. J. P. Meertens, G. Nakiboglu, A. Hirschberg, EindhovenUniversity of Technology, Eindhoven, Netherlands; S. Belfroid, TNO, Delft,NetherlandsPVP2013-97349: DAMPING OF ACOUSTIC WAVES IN PIPELINES DUE TOEND CONDITIONSH. Goyder, Cranfield University, Shrivenham, United KingdomPVP2013-97662: EXPERIMENTAL AND NUMERICAL 3D STUDY OF FLOW-SOUND INTERACTION IN A STEAM-LINE GATE VALVER. Lacombe, P. Lafon, F. Crouzet, F. Daude, LaMSID/EDF, Clamart, France; S.R. Ziada, McMaster University, Hamilton, ON, Canada; C. Bailly, Ecole Centralede Lyon, Ecully, FranceSESSION 2.3O (MF-7-1)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 3, Le Parc Montsouris BMATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER PLANTS—IDeveloped by: W. Ren, Oak Ridge National Laboratory, Oak Ridge, TN, USA;

R. Nanstad, Oak Ridge National Lab, Oak Ridge, TN, USAChair: R. Nanstad, Oak Ridge National Lab, Oak Ridge, TN, USACo-Chair W. Ren, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2013-97033: MASTER CURVE AND J-R FRACTURE TOUGHNESS OF

A508-3/A533B-1 WELD AND HAZR. Nanstad, X. Chen, M. A. Sokolov, Oak Ridge National Laboratory, Oak Ridge,TN, USA; B. H. Rabin, Idaho National Laboratory, Idaho Falls, ID, USA; Y. Yang,Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2013-9779: FULL STRUCTURAL WELD OVERLAY REPAIR ON A REAC-TOR VESSEL FEEDWATER NOZZLE AT AN EUROPEAN BWR (PresentationOnly)S. McCracken, Electric Power Research Institute, Charlotte, NC, USA; J. Heldt,Nuclear Power Plant Leibstadt, Leibstadt, SwitzerlandPVP2013-97793: VALIDITY OF HARDNESS CRITERIA TO DEMONSTRATEACCEPTABLE TEMPER BEAD HAZ IMPACT PROPERTIES FOR NUCLEARPOWER APPLICATIONSS. McCracken, Electric Power Research Institute, Charlotte, NC, USA; R. Smith,Structural Integrity Associates, Huntersville, NC, USA; D. Barborak, AquilexSRO,LLC, Norcross, GA, USAPVP2013-97358: DEVELOPMENT OF NEW WELD HEAT INPUT AND DILU-TION EQUATIONS FOR GAS TUNGSTEN ARC WELDING—PART 1J. Tatman, S. McCracken, Electric Power Research Institute, Charlotte, NC,USA; T. G. Hicks, Bettis Atomic Power Laboratory, West Mifflin, PA, USASESSION 2.3Q (TW-1-8)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 2, Les Invalides A+BBOLTED JOINT DESIGN, ANALYSIS, AND CODE COMPLIANCE—PART IDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: S. Nassar, Oakland University, Rochester, MI, USA; W. Brown,

Integrity Engineering Solutions, Dunsborough, AustraliaSESSION 2.3S (CT-15-3)Tuesday, July 16, 2:00 pm – 3:45 pm, Level 0, Foyer La SeineSOFTWARE DEMONSTRATION FORUM IIIDeveloped by: J. F. Cory Jr., Siemens PLM Software, Milford, USAChair: J. F. Cory Jr., Siemens PLM Software, Milford, USA

no textBlock 2.4: Tuesday, July 16 (4:00 pm – 5:45 pm)

no textSESSION 2.4A (MF-25-2)Tuesday, July 16, 4:00 pm – 5:45 pm, Level -1, Ella Fitzgerald BCOMPOSITE PIPING SYSTEMSSymposium of Plastics and Composites—Co-Sponsored by Design &Analysis, Materials & Fabrication, High Pressure Technology, and Codes &Standards Technical CommitteesDeveloped by: H. Faria, INEGI, Porto, PortugalChair: H. Faria, INEGI, Porto, PortugalCo-Chair A. T. Marques, University of Porto, Porto, PortugalPVP2013-97497: THE EFFECT OF DIFFERENT TYPES OF SURFACEPREPARATION ON LAP SHEAR STRENGTH OF A TYPICAL AMBIENTCURED CARBON FIBER COMPOSITE REPAIR SYSTEMT. Mally, Citadel Technologies, Tulsa, USA; M. Keller, University of Tulsa, Tulsa,OK, USA; R. H. Walker, Citadel Technologies, Tulsa, OK, USAPVP2013-97731: DEPENDENCE OF TENSILE STRENGTH ONGEOMETRICAL INTERFACE CONDITIONS OF BONDED DISSIMILARMATERIALSM. Tateno, E. Yokoi, Kogakuin University, Tokyo, JapanPVP2013-97914: LONG-TERM DESIGN OF COMPOSITE PIPES AND TANKSH. Faria, INEGI, Porto, Portugal; R. M. Guedes, A. T. Marques, Universidade doPorto, Porto, PortugalSESSION 2.4B (SPC-1-7)Tuesday, July 16, 4:00 pm – 5:45 pm, Level -1, Ella Fitzgerald ASTUDENT PAPER SYMPOSIUM IIIDeveloped by: Y. W. Kwon, Naval Postgraduate School, Monterey, CA, USA;

R. S. Hafner, Lawrence Livermore National Laboratory,Livermore, CA, USA

Chair: T. Taniguchi, Tottori University, Tottori, Japan

34

Co-Chair V. Janzen, Atomic Energy of Canada Ltd., Chalk River, ON,Canada

PVP2013-97101: RESIDUAL STRESS MEASUREMENT IN A STAINLESSSTEEL CLAD FERRITIC PLATE USING THE CONTOUR METHODN. Naveed, F. Hosseinzadeh, J. Kowal, The Open University, Milton Keynes,Buckinghamshire, United KingdomPVP2013-97889: USE OF THE ALTERNATING CURRENT POTENTIAL DROP(ACPD) TECHNIQUE TO MONITOR CREEP BEHAVIOUR OF AUSTENITICSTEELSA. Narayanan, C. M. Davies, Yasser K. Mahmoud, Imperial College London,London, United KingdomPVP2013-97739: FUNDAMENTAL STUDY ON HEALTH MONITORING FORPIPE BY VIBRATION ANALYSISS. Kawazu, S. Fujita, Tokyo Denki University, Tokyo, Japan; K. Minagawa,Saitama Institute of Technology, Saitama, JapanPVP2013-97097: THE CONSEQUENCES OF MACROSEGREGATION ONTHE TRANSFORMATION BEHAVIOUR OF A PRESSURE-VESSEL STEELE.J. Pickering, H. K. D. H. Bhadeshia, University of Cambridge, Cambridge,United KingdomPVP2013-97418: TOWARDS THE DEVELOPMENT OF FILAMENT WOUNDCOMPOSITE STRUCTURES SUBMITTED TO VERY HIGH INTERNAL PRES-SURE, BASED ON COMPLEX GEOMETRY SHAPESE. V. Rojas, D. Chapelle, D. Perreux, Université de Franche-Comté FEMTO-STDMA, Besançon, FranceSESSION 2.4C (MF-11-2)Tuesday, July 16, 4:00 pm – 5:45 pm, Level -1, Miles Davis CINTEGRITY ISSUES IN SCC AND CORROSION FATIGUE-2Developed by: Z. Wei, Tenneco Inc., Grass Lake, MI, USA; M. Mochizuki,

Osaka University, Osaka, JapanChair: D. L. Rudland, US Nuclear Regulatory Commission, Rockville,

MD, USACo-Chair S. Maleki, TWI Ltd., Cambridge, United KingdomPVP2013-97258: STRUCTURAL INTEGRITY ANALYSES FOR A PREEMP-TIVE WELD OVERLAY IN A PRESSURIZER SURGE NOZZLER.-F. Liu, C.-C. Huang, Institue of Nuclear Energy Research, Taoyuan, TaiwanPVP2013-97352: RESISTANCE OF FERRITIC STEELS TO STRESSCORROSION CRACKING IN HIGH TEMPERATURE WATERR. B. Rebak, GE Global Research, Schenectady, NY, USAPVP2013-97949: METHOD OF LIFETIME ESTIMATION FOR PRESSUREVESSEL INTERNALS ON IASCC CRITERIONV. Fedorova, B. Margolin, Central Research Institute of Structural Materials“Prometey,” Saint-Petersburg, RussiaSESSION 2.4D (FSI-3-2)Tuesday, July 16, 4:00 pm – 5:45 pm, Level -1, Miles Davis B17TH INTERNATIONAL SYMPOSIUM ON EMERGING TECHNOLOGY FORFLUIDS, STRUCTURES, AND FLUID-STRUCTURE INTERACTIONS—FLUID-STRUCTURE INTERACTION AND WAVE PROPAGATIONDeveloped by: G. Papadakis, Imperial College London, London, United

Kingdom; K. Inaba, Tokyo Institute of Technology, Tokyo, JapanChair: C. Giannopapa, Eindhoven University of Technology,

Eindhoven, NetherlandsCo-Chair H. Iyama, Kumamoto National College of Technology,

Yatsushiro-gun, Kumamoto, JapanPVP2013-97247: SOLID-LIQUID SLURRY FLOW THROUGH AN EXPANSIONIN A RECTANGULAR DUCTG. Messa, S. Malavasi, Politecnico di Milano, Milano, ItalyPVP2013-97460: NUMERICAL PREDICTION OF PRESSURE GRADIENT OFSLURRY FLOWS IN HORIZONTAL PIPESG. Messa, Politecnico di Milano, Milano, Italy; M. Malin, CHAM Limited, London,United Kingdom; S. Malavasi, Politecnico di Milano, Milano, ItalyPVP2013-97567: WAVE PROPAGATION IN TAPERED VESSELS: NEW ANA-LYTIC SOLUTIONS THAT ACCOUNT FOR VESSEL DISTENSIBILITY ANDFLUID COMPRESSIBILITYG. Papadakis, Imperial College London, London, United KingdomPVP2013-97855: TRANSIENT BEHAVIOR OF WATER HAMMER THROUGH

DISCONTINUITYK. Inaba, M. Kamijukkoku, K. Takahashi, K. Kishimoto, Tokyo Institute ofTechnology, Tokyo, JapanPVP2013-97345: TOWARDS A SMOOTHED PARTICLE HYDRODYNAMICSALGORITHM FOR SHOCKS THROUGH LAYERED MATERIALSI. Zisis, B. van der Linden, C. Giannopapa, Eindhoven University of Technology,Eindhoven, NetherlandsSESSION 2.4E (MF-4-7)Tuesday, July 16, 4:00 pm – 5:45 pm, Level -1, Miles Davis ARESIDUAL STRESS FIELDS IN DISSIMILAR MATERIAL WELDS AND THICKCOMPONENTSDeveloped by: D. L. Rudland, US Nuclear Regulatory Commission, Rockville,

MD, USAChair: V. Robin, AREVA NP SAS, Paris, FranceCo-Chair M. R. Hill, University of California, Davis, CA, USAPVP2013-97176: RESIDUAL STRESS STUDY IN DISSIMILAR METALWELDS OF A PWR PRESSURIZER SURGE NOZZLE: VALIDATION OFDEVELOPED FAST ANALYSIS METHOD AND EXAMINATION OF SAFE-ENDLENGTH EFFECTA. Maekawa, Institute of Nuclear Safety System, Inc., Fukui, Japan; A.Kawahara, H. Serizawa, H. Murakawa, Osaka University, Osaka, JapanPVP2013-97866: RESIDUAL STRESS EVALUATION OF DISSIMILAR WELDJOINT USING MOCK-UP MODELS OF BOTTOM MOUNTED INSTRUMENTNOZZLEN. Ogawa, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; K. Hojo,Mitsubishi Heavy Industries Ltd., Kobe, Japan; H. Shirako, Kansai ElectricPower Co., Inc., Mikata-gun, Japan; T. Sera, Kansai Electric Power Co., Inc.,Osaka, JapanPVP2013-98081: MODELING OF WELD RESIDUAL PLASTIC STRAIN ANDSTRESS IN DISSIMILAR METAL BUTT WELD IN NUCLEAR REACTORSD. Qiao, Oak Ridge National Laboratory, Oak Ridge, TN, USA; W. Zhang, OhioState University, Columbus, OH, USA; Z. Feng, Oak Ridge National Laboratory,Oak Ridge, TN, USA; P. Crooker, Electric Power Research Institute, Palo Alto,CA, USA; Y. Wang, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2013-98071: MITIGATION OF WELDING-INDUCED TENSILE RESIDUALSTRESS AT SURFACE OF HEAVY SECTION PLATE BY IN-PROCESS CON-TROL WELDING WITH TRAILING-HEAT SINKS. Okano, M. Mochizuki, Osaka University, Osaka, JapanPVP2013-97238: SIMPLIFIED COMPUTATION OF THE WELDING PROCESSON A STEAM-generator divider plateF. Rossillon, EDF SEPTEN, Villeurbanne, France; L. Depradeux, EC2-Modélisation, Villeurbanne, FranceSESSION 2.4F (CS-13-3)Tuesday, July 16, 4:00 pm – 5:45 pm, Level -1, Louis Armstrong A+BHIGH TEMPERATURE CODES AND STANDARDS FOR DESIGNDeveloped by: T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN,

USA; R. Barnes, ANRIC Enterprises, Inc., Toronto, ON, CanadaChair: T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN,

USACo-Chair: R. Barnes, Etobicoke, CanadaPVP2013-97113: EVALUATION OF CREEP-FATIGUE DAMAGE BASED ONSIMPLIFIED Model Test ApproachY. Wang, T. Li, T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN, USA;R. I. Jetter, Consultant, Pebble Beach, CA, USAPVP2013-97114: EXAMPLE PROBLEMS FOR PROPOSED ELASTIC-PERFECTLY PLASTIC PRIMARY LOAD DESIGN (Presentation Only)T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN, USA; R. I. Jetter,Consultant, Pebble Beach, CA, USA; T. Li, Oak Ridge National Laboratory, OakRidge, TN, USAPVP2013-98045: STRAIN RATE SENSITIVITY OF ALLOYS 800H AND 617J. Wright, J. Simpson, R. Wright, L. Carroll, Idaho National Laboratory, IdahoFalls, ID, USA; T.-L. Sham, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2013-97699: CONSIDERATION OF CREEP IN DESIGN RULES OFAFCEN RCC-MRX 2012 CODET. Lebarbé, C. Petesch, CEA, Gif sur Yvette, France; Y. Lejeail, P. Lamagnere,

35

CEA, Saint Paul Lez Durance, France; S. Dubiez-Le Goff, Areva NP, Lyon,FrancePVP2013-97462: ELASTIC-ROUTE ESTIMATES OF STRAIN RANGE FORNOTCHED COMPONENTS UNDER THERMAL LOADING WITHOUTPERFORMING LINEARIZATION OF STRESSEST. Fujioka, Central Res Institute of Electric Power Industry, Yokosuka,Kanagawa, JapanSESSION 2.4G (DA-2-4)Tuesday, July 16, 4:00 pm – 5:45 pm, Level -1, Louis Armstrong C+DDA-2-4 DESIGN & ANALYSIS OF PIPING & PIPING COMPONENTS IVDeveloped by: A. Dweib, Worley Parsons, Atyrau, Kazakhstan; C. Basavaraju,

US Nuclear Regulatory Commission, Rockville, MD, USA; B. Li,AMEC NSS Ltd., Toronto, Canada; N. Zobeiry, Hatch,Mississauga, Canada

Chair: A. Dweib, Worley Parsons, Atyrau, KazakhstanCo-Chair: C. Basavaraju, US Nuclear Regulatory Commission, Rockville,

MD, USAPVP2013-97666: A DIRECT EVALUATION OF PLASTIC SHAKEDOWN LIMITOF A PIPING NOZZLE STRUCTURE UNDER SUPERPOSED MULTIPLELOADINGSG. Chen, J.-W. Simon, RWTH Aachen University, Aachen, Germany; D.Weichert, Inst Für Allegemeine Mechanik, Aachen, GermanyPVP2013-97689: CALCULATION APPROACH OF OPTIMUM CUTTINGSURFACES OF EXTRA LENGTH OF PIPE SPOOLST. Kitahara, Hitachi Plant Technologies, Ltd., Matsudo-shi, Chiba-Ken, Japan; Y.Yamamoto, Hitachi Plant Technologies, Ltd., Toshima-ku, Tokyo, Japan; Y.Tagawa, Tokyo University of Agriculture & Technology, Tokyo, JapanPVP2013-97963: TRIAXIAL RESIDUAL STRESSES IN THERMOMECHANI-CALLY ROLLED SEAMLESS TUBES CHARACTERIZED BY HIGH-ENERGYSYNCHROTRON X-RAY DIFFRACTIONG. Winter, voestalpine Tubulars GmbH & Co KG, Kinberg, Austria; M. Stefenelli,Materials Center Leoben, Leoben, Austria; J. Klarner, voestalpine TubularsGmbH & Co KG, Kindberg, Austria; P. Staron, T. Fischer, Helmholtz-ZentrumGeesthacht, Geesthacht, Germany; J. Keckes, B. Buchmayr, University ofLeoben, Leoben, AustriaPVP2013-98013: BRITTLE FRACTURE ASSESSMENTS ON OFFSHOREPIPING SYSTEMSK. Subramanian, Stress Engineering Services Inc., Kenner, LA, USA; J. Penso,Shell Global Solutions, Cypress, TX, USA; G. McVinnie, Shell UpstreamAmericas, New Orleans, LA, USA; G. Garic, Stress Engineering Srvc Inc.,Metairie, LA, USAPVP2013-98086: EVALUATION OF WELDING RESIDUAL STRESS IN GTAWTUBULAR WELDSH. K. Jin, H. G. Kim, S. B. Shin, Hyundai Heavy Industries Co., Ltd., Ulsan,Korea (Republic)SESSION 2.4H (CS-19-1)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 0, Pont De Sully A+BINTEGRITY OF CAST STAINLESS STEEL PIPEDeveloped by: T. Griesbach, Structural Integrity Associates, Inc., San Jose,

CA, USA; K. Hojo, Mitsubishi Heavy Industries Ltd., Kobe,Japan

Chair: T. Griesbach, Structural Integrity Associates, Inc., San Jose,CA, USA

Co-Chair: K. Hojo, Mitsubishi Heavy Industries Ltd., Kobe, JapanPVP2013-97712: BASIS FOR ASME SECTION XI CODE CASE FOR FLAWTOLERANCE EVALUATION OF CASS PIPINGT. Griesbach, D. O. Harris, N. Cofie, Structural Integrity Associates, Inc., SanJose, CA, USA; A. Chockie, Chockie Group International, Inc., Lake Forest Park,WA, USA; D. Dedhia, Structural Integrity Associates, Inc., San Jose, CA, USA;PVP2013-98112: THE LONG JOURNEY IN THE DEVELOPMENT OF ISIRULES FOR CASS PIPINGA. Chockie, Chockie Group International, Inc., Lake Forest Park, WA, USA; T.Griesbach, Structural Integrity Associates, Inc., San Jose, CA, USAPVP2013-98154: ELASTIC-PLASTIC FRACTURE MECHANICS ANALYSISOF CAST STAINLESS STEEL PIPES (INFLUENCE OF AXIAL LOAD ON Z-

FACTOR OF PIPES WITH CIRCUMFERENTIAL CRACK UNDER BENDINGLOAD)M. Kamaya, INSS, Mikata-gukn, Japan; K. Hojo, Mitsubishi Heavy IndustriesLtd., Kobe, JapanPVP2013-98157: INTRODUCTION OF JSME RULES ON FITNESS FORSERVICE FOR CASS PIPING AND PROPOSAL OF IMPROVEMENTSK. Hojo, Mitsubishi Heavy Industries Ltd., Kobe, Japan; M. Kamaya, INSS,Mikata-gukn, JapanSESSION 2.4I (FSI-4-1)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 0, Pont De Arts AEFFECTS OF BLAST, THERMAL AND ACOUSTIC LOADSDeveloped by: H. Levine, Weidlinger Associates, Inc., Mountain View, USA; S.

Jones, The University of Alabama, Tuscaloosa, AL, USA; D.Sommerville, Structural Integrity Associates, Inc., Mukilteo, WA,USA; J. Geng, Baker Engineering & Risk Consultants, Inc., SanAntonio, TX, USA

Chair: H. Levine, Weidlinger Associates, Inc., San Jose, CA, USACo-Chair S. Jones, The University of Alabama, Tuscaloosa, AL, USAPVP2013-97207: DEVELOPMENT OF A TWO-WAY FLUID STRUCTURECOUPLING FOR STUDYING POWER TRANSFORMERS SUBJECTED TOINTERNAL DYNAMIC OVER-PRESSURESB. Landis, O. Ahmed, S. Yoon, A. Goj, Transformer Protector Corp, Humble, TX,USA; G. Perigaud, SERGI Holding, Acheres, FrancePVP2013-97505: SIMULATING EXPLOSIVE DETONATIONS WITHINMULTIROOM BUILDINGSD. Vaughan, J. Mould Jr., Weidlinger Associates, Inc., Mountain View, CA, USA;D. Tennant, Weidlinger Associates, Inc., Albuquerque, NM, USA; H. Levine,Weidlinger Associates, Inc., San Jose, CA, USAPVP2013-98020: EFFECT OF EXPLOSION SOURCE TYPE ON BLAST WAVESHIELDINGJ. Geng, Baker Engineering & Risk Consultants, Inc., San Antonio, TX, USA; K.Thomas, Baker Engineering and Risk Consultants, INC., San Antonio, TX, USAPVP2013-97640: IMPACT OF THERMAL HAZARDS ON PROCESSBUILDINGS USING CFD TECHNIQUESA. Raibagkar, Baker Engineering and Risk Consulting, Houston, TX, USA; M.Edel, BakerRisk, San Antonio, TX, USAPVP2013-97728: BOILING WATER REACTOR RECIRCULATION LINEBREAK ACOUSTIC LOADSA BOUNDING APPROACHD. Sommerville, Structural Integrity Associates, Inc., Mukilteo, WA, USASESSION 2.4J (SE-8-1)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 0, Pont De Arts BBASE ISOLATION AND STRUCTURAL CONTROL TECHNOLOGY IDeveloped by: O. Furuya, Tokyo City University, Tokyo, JapanChair: O. Furuya, Tokyo City University, Tokyo, JapanCo-Chair T. Matsuoka, Meiji University, Kawasaki, Kanagawa, JapanPVP2013-97351: VIBRATION SUPPRESSION OF TRAFFIC SIGNAL POLEBY GENERATING ELECTRICAL POWERT. Matsuoka, T. Wada, M. Katakura, Meiji University, Kawasaki, Kanagawa,JapanPVP2013-97529: THE INFLUENCE OF VISCOUS DAMPERS ON THEBETTER PERFORMANCE OF THE WATER PIPELINES SUBJECTED TONEAR-FAULT EARTHQUAKESS. K. S. Shokouhi, Islamic Azad University, South Tehran Branch, Tehran, Iran;A. Dolatshah, Islamic Azad University, Dezful Branch, Tehran, Iran; H. R.Vosoughifar, Islamic Azad University, South Tehran Branch, Tehran, Iran; Y.Rahnavard, Technical University of Braunschweig, Braunschweig, GermanyPVP2013-97826: INQUIRY INTO CHARACTERISTIC OF MULTIPLEFRICTION PENDULUM SYSTEM WITH MULTIPLE SLIDING SURFACESUNDER BIDIRECTIONAL LOADINGSC.-S. Tsai, Y.-M. Wang, H.-C. Su, Feng Chia University, Taichung, TaiwanPVP2013-97884: OPTIMAL PLACEMENT OF VISCOUS DAMPERS IN THEWATER PIPELINE NETWORKS SUBJECTED TO NEAR-FAULTEARTHQUAKES USING GENETIC ALGORITHMS. K. S. Shokouhi, Islamic Azad University, South Tehran Branch, Tehran, Iran;A. Dolatshah, Islamic Azad University, Dezful Branch, Tehran, Iran; H. R.

36

Vosoughifar, Islamic Azad University, South Tehran Branch, Tehran, Iran; Y.Rahnavard, Technical University of Braunschweig, Braunschweig, GermanyPVP2013-97921: RESEARCH AND DEVELOPMENT OF DISTRIBUTEDMULTISTAGE TMD FOR LONG PERIOD STRUCTURE USING COIL SPRINGO. Furuya, Tokyo City University, Tokyo, Japan; H. Kurabayashi, Vibro-System,Tokyo, JapanSESSION 2.4L (OAC-3-2)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 2, St. MichelMONITORING, DIAGNOSTICS AND INSPECTIONDeveloped by: I. Ezekoye, Westinghouse Electric Company, Cranberry Woods,

PA, USA; M. Brumovsky, UJV a.s., Rez, Czech RepublicChair: I. Ezekoye, Westinghouse Electric Company, Cranberry Woods,

PA, USACo-Chair: M. Brumovsky, UJV a.s., Rez, Czech RepublicPVP2013-97209: A NOVEL IMAGE PROCESSING METHOD FOR ARCMACPOINT TO POINT OPTICAL STRAIN MEASUREMENTH. Yang, C. M. Davies, P. Hooper, Imperial College London, London, UnitedKingdom; A. Morris, E.ON Energy, Nottingham, United Kingdom; J. Dear,Imperial College London, London, United KingdomPVP2013-97315: THE APPLICATION OF ULTRASONIC GUIDED WAVES INTHE FURNACE TUBE INSPECTIONL. Xia, Y. Ye, X. Wang, Zhe Jiang Provincial Special Equipment Inspection andResearch Institute, Hangzhou, Zhejiang, ChinaPVP2013-98136: IMPACT OF NEW IMAGING NONDESTRUCTIVE METHODSIN TESTING AND MONITORING OF COMPOSITE AND METALLIC COMPO-NENTSH. Walaszek, C E T I M, Senlis, FrancePVP2013-97715: OPTIMAL SENSOR PLACEMENT IN THE WATER PIPELINENETWORKS EQUIPPED WITH PNEUMATIC DAMPERS UNDER BLASTWAVESS. K. S. Shokouhi, Islamic Azad University, South Tehran Branch, Tehran, Iran;A. Dolatshah, Islamic Azad University, Dezful Branch, Tehran, Iran; H. R.Vosoughifar, Islamic Azad University, South Tehran Branch, Tehran, Iran; Y.Rahnavard, Technical University of Braunschweig, Braunschweig, GermanySESSION 2.4M (DA-8-3)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 2, St. Germain Des Pres A+BFITNESS FOR SERVICE 3Symposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: C. Rodery, BP Corporation North America, Inc., League City,

TX, USAChair: C. Rodery, BP Corporation North America, Inc., League City,

TX, USACo-Chair T. G. Seipp, Becht Engineering Canada, Ltd., Calgary, AB,

CanadaPVP2013-97913: DEVELOPMENT OF A PLASTIC COLLAPSE ASSESSMENTPROCEDURE FOR CYLINDRICAL VESSELS WITH A LOCAL THIN AREANEAR A NOZZLE UNDER INTERNAL PRESSUREK. Oyamada, High Pressure Gas Safety Institute of Japan, Tokyo, Japan; S.Konosu, T. Horibe, K. Ogasawara, Ibaraki University, Hitachi, Ibaraki, Japan; T.Miyashita, T. Ohno, High Pressure Gas Safety Institute of Japan, Tokyo, JapanPVP2013-97575: EVALUATING FITNESS-FOR-SERVICE ASSESSMENTPROCEDURES FOR PRESSURIZED COMPONENTS SUBJECT TO LOCALTHIN AREAS NEAR STRUCTURAL DISCONTINUITIESP. Prueter, D. J. Dewees, R. G. Brown, The Equity Engineering Group, Inc.,Shaker Heights, OH, USAPVP2013-98169: LOCAL THIN AREAS ADJACENT TO OTHER LOCAL THINAREAS IN API-579/ASME FFS-1C. Becht 5th, G. Epremian, E. Chant, J. R. Sims, D. Pease, Becht EngineeringCo., Inc., Liberty Corner, NJ, USAPVP2013-98068: IMPROVEMENTS IN ADAPTING M-ALPHA TANGENTMETHOD FOR FITNESS FOR SERVICE EVALUATION OF LTAS INSTORAGE TANKSS. Sathyanarayanan, S. M. R. Adluri, Memorial University of Newfoundland, St.

John’s, NF, CanadaSESSION 2.4N (FSI-2-8)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 3, Le Parc Montsouris APIPING VIBRATIONS AND ACOUSTICS IIIDeveloped by: S. R. Ziada, McMaster University, Hamilton, ON, CanadaChair: H. Goyder, Cranfield University, Shrivenham, United KingdomCo-Chair P. Moussou, Electricite de France, Clamart 92141, FrancePVP2013-97021: EFFECT OF SOUND ON THE WAKE OF SIDE-BY-SIDECYLINDERS IN A DUCTD. Arthurs, University of Ontario Institute of Technology, Hamilton, ON, Canada;M. Bolduc, A. Ritcey, S. R. Ziada, McMaster University, Hamilton, ON, CanadaPVP2013-97037: ACOUSTIC RESPONSE OF OPPOSING PLANAR JETSM. Hassaballa, S. R. Ziada, D. Arthurs, McMaster University, Hamilton, ON,CanadaPVP2013-97970: ACOUSTIC DAMPING IN SMOOTH AND CORRUGATEDPIPES WITH AND WITHOUT LIQUID INJECTIONJ. Golliard, S. Belfroid, O. Vijlbrief, TNO, Delft, NetherlandsPVP2013-97340: ON THE WHISTLING OF CORRUGATED PIPES WITH NAR-ROW CAVITIESJ. Golliard, TNO, Delft, Netherlands; E. Bendiksen, C. Frimodt, National OilwellVarco, Broendby, Denmark; S. Belfroid, N. G. Diez, TNO, Delft, NetherlandsSESSION 2.4O (MF-7-2)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 3, Le Parc Montsouris BMATERIALS AND TECHNOLOGIES FOR NUCLEAR POWER PLANTS—IIDeveloped by: W. Ren, Oak Ridge National Laboratory, Oak Ridge, TN, USA;

R. Nanstad, Oak Ridge National Lab, Oak Ridge, TN, USAChair: W. Ren, Oak Ridge National Laboratory, Oak Ridge, TN, USACo-Chair R. Nanstad, Oak Ridge National Lab, Oak Ridge, TN, USAPVP2013-97290: MECHANICAL PROPERTY DATABASE DEVELOPMENTAND CREEP PREDICTION OF CANDIDATE GENERATION IV SCWRALLOYSS. Xu, S.-M. Jin, P. Le Dreff-Kerwin, CanmetMATERIALS, Hamilton, ON,CanadaPVP2013-97454: STUDY ON TEMPERATURE DISTRIBUTION OF PEBBLE-BED HTR FUEL ELEMENT BY USING BOUNDARY ELEMENT METHODH.-T. Wang, X. Wang, Institute of Nuclear and New Energy Technology, Beijing,ChinaPVP2013-97593: INVESTIGATION OF STRESS STABILIZATION BEHAVIOROF TYPE 316 STEELR. Hormozi, F. Biglari, K. M. Nikbin, Imperial College London, London, London,United KingdomPVP2013-98003: A UNIFIED VISCOPLASTIC MODEL FOR HIGHTEMPERATURE LOW CYCLE FATIGUE OF SERVICE-AGED P91 STEELR. A. Barrett, P. E. O’Donoghue, S. Leen, NUI Galway, Galway, IrelandPVP2013-97960: RESIDUAL STRESS AND MORE, WHAT NEUTRONSCATTERING CAN AND HAS DONE FOR PVP R&D (Presentation Only)R. Rogge, National Research Council, Canada, Chalk River, CanadaSESSION 2.4Q (TW-1-8)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 2, Les Invalides A+BBOLTED JOINT DESIGN, ANALYSIS, AND CODE COMPLIANCE—PART IIDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: S. Nassar, Oakland University, Rochester, MI, USA; W. Brown,

Integrity Engineering Solutions, Dunsborough, AustraliaSESSION 2.4S (CT-15-4)Tuesday, July 16, 4:00 pm – 5:45 pm, Level 0, Foyer La SeineSOFTWARE DEMONSTRATION FORUM IVDeveloped by: J. F. Cory Jr., Siemens PLM Software, Milford, USAChair: J. F. Cory Jr., Siemens PLM Software, Milford, USA

37

WEDNESDAY, JULY 17

no textBlock 3.1: Wednesday, July 17 (8:30 am – 10:15 am)

no textSESSION 3.1A (HT-6-1)Wednesday, July 17, 8:30 am – 10:15 am, Level -1, Ella Fitzgerald BCOMPOSITE MATERIALS FOR HIGH PRESSURE VESSELS ANDCOMPONENTSSymposium of Plastics and Composites—Co-Sponsored by Design &Analysis, Materials & Fabrication, High Pressure Technology, and Codes &Standards Technical CommitteesDeveloped by: M. Aggarwal, Gannon University, Erie, USAChair: C. Smith, Fluor, Houston, TX, USACo-Chair: D. Stang, OMAX Corporation, Kent, WA, USA PVP2013-97128: VISUAL END-OF-LIFE CRITERION FOR COMPOSITE HIGHPRESSURE VESSELS FOR HYDROGEN STORAGEH.-Y. Chou, A. Bunsell, A. Thionnet, Mines Paristech, Evry, Ile de France, FrancePVP2013-97159: RATE LOADING EFFECT ON THE FAILURE OF COMPOS-ITE PRESSURE VESSELSH.-Y. Chou, A. Bunsell, Mines Paristech, Evry, Ile de France, France; G. Mair,BAM, Berlin, Germany; A. Thionnet, Mines Paristech, Evry, Ile de France, FrancePVP2013-97461: ENHANCED DESIGN REQUIREMENTS AND TESTINGPROCEDURES FOR COMPOSITE CYLINDERS INTENDED FOR THE SAFESTORAGE OF HYDROGEN (Presentation Only)C. Devilliers, Air Liquide - Claude Delorme Research Center, Jouy-en-Josas,France; F. Barth, Air Liquide Hydrogen Energy, Paris, France; R. Dey, CCSGlobal Group, Oakville, ON, Canada; S. Joannes, Mines ParisTech, Evry,France; G. Mair, BAM, Berlin, Germany; J. Kaleta, Wroclaw University ofTechnology, Wroclaw, Poland; B. Acosta-Iborra, Joint Research Center - IET,Petten, Netherlands; F. Nony, CEA Le Ripault, Monts, France; P. Heggem,Hexagon Composites, Ålesund, Norway; A. Agnoletti, Faber Industrie S.P.A.,Cividale Del Friuli, Udine, Italy; G. Cassand, EADS Composites Aquitaine,Salaunes, FranceSESSION 3.1B (CT-10-1)Wednesday, July 17, 8:30 am – 10:15 am, Level -1, Ella Fitzgerald ACOMPUTATIONAL APPLICATIONS IN FATIGUE, FRACTURE AND DAMAGEMECHANICSDeveloped by: W. Reinhardt, Candu Energy Inc., Mississauga, ON, CanadaChair: W. Reinhardt, Candu Energy Inc., Mississauga, ON, CanadaCo-Chair R. Adibiasl, AMEC NSS, Toronto, CanadaPVP2013-97028: DUCTILE FAILURE MODELLING OF EXPANDEDALUMINIUM TUBES WITH EMBEDDED CIRCULAR HOLESI. Barsoum, F. Khan, A. Seibi, A. Molki, The Petroleum Institute, Abu Dhabi,United Arab Emir.PVP2013-97727: COMPARISON OF HANDBOOK AND 3-D FINITE ELEMENTANALYSIS LEFM SOLUTIONS FOR THREADED FASTENERD. Sommerville, Structural Integrity Associates, Inc., Mukilteo, WA, USA; M. Qin,M. Walter, Structural Integrity Associates, Inc., Centennial, CO, USAPVP2013-97917: AN INNOVATIVE PRECISE INTEGRATION METHOD INSOLVING STRUCTURAL DYNAMIC PROBLEMSC. Wu, National Center for Research on Earthquake Engineering, Taipei City,Taiwan; C.-C. Chuang, Chung Yuan Christian University, Chungli City, TaiwanPVP2013-98085: A UNIFIED APPROACH FOR COMPARISON OFMULTIAXIAL FATIGUE MODELSM. Noban, R. Adibiasl, AMEC NSS, Toronto, ON, CanadaSESSION 3.1C (CS-26-1)Wednesday, July 17, 8:30 am – 10:15 am, Level -1, Miles Davis CFATIGUE MONITORING AND RELATED ASSESSMENT METHODS—IDeveloped by: J. Rudolph, S. Bergholz, AREVA NP GmbH, Erlangen, Bayern,

Germany; B. Heinz, AREVA NP GmbH, Nürnberg, GermanyChair: J. Rudolph, AREVA GmbH, Erlangen, Bavaria, Germany

Co-Chair S. H. Reese, E.ON Kernkraft GmbH, Hannover, GermanyPVP2013-97029: MONITORING WITH GOOD CAUSE—BASIC PRINCIPLESAND CURRENT STATUSH. Rothenhöfer, AMTEC Messtechnischer Service GmbH, Lauffen, Germany; A.Manke, EnBW Kernkraft GmbH, Neckarwestheim, GermanyPVP2013-97236: AUTOMATIC FATIGUE MONITORING BASED ON REALLOADS AND CONSIDERATION OF EAF—LIVE DEMONSTRATIONS. Bergholz, B. Jouan, J. Rudolph, AREVA GmbH, Erlangen, Bayern, Germany;B. Heinz, AREVA NP GmbH, Nürnberg, GermanyPVP2013-97660: AUTOMATIC FATIGUE MONITORING BASED ON REALLOADS—CALCULATION EXAMPLE OF A FLANGEB. Jouan, S. Bergholz, J. Rudolph, AREVA NP GmbH, Erlangen, Bayern,Germany; G. Koenig, A. Manke, EnBW Kernkraft GmbH, Neckarwestheim,GermanyPVP2013-98032: FATIGUE MONITORING OF BWR FEEDWATER NOZZLESK. Evon, M. Walter, Structural Integrity Associates, Inc., Centennial, CO, USA; T.Gilman, Structural Integrity Associates, Inc., San Jose, CA, USAPVP2013-97671: VERIFICATION OF THE LINEAR MATCHING METHOD FORLIMIT AND SHAKEDOWN ANALYSIS BY COMPARISON WITHEXPERIMENTSJ. Ure, H. Chen, University of Strathclyde, Glasgow, Glasgow City, UnitedKingdom; D. Tipping, EDF Energy, Gloucester, United KingdomSESSION 3.1D (CS-4-1)Wednesday, July 17, 8:30 am – 10:15 am, Level -1, Miles Davis BINTERACTION AND FLAW MODELING FOR MULTIPLE FLAWS—ISponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: J. K. Sharples, AMEC Power and Process Europe, Warrington,

United Kingdom; K. Miyazaki, Hitachi Research Lab, HitachiLtd., Ibaraki-ken, Japan

Chair: AMEC Power and Process Europe, Warrington, UnitedKingdom

Co-Chair F. Iwamatsu, Hitachi, Ltd., Ibaraki, JapanPVP2013-97466: EVALUATION PROCEDURE OF LIMIT LOAD FOR NON-ALIGNED MULTIPLE FLAWSF. Iwamatsu, K. Miyazaki, H. Takazawa, Hitachi Research Lab, Ibaraki, Japan;K. Saito, Hitachi-GE Nuclear Energy, Ltd., Ibaraki, JapanPVP2013-97582: DUCTILE FRACTURE SIMULATION OF A PIPE OF STEAMGENERATOR IN PWRY. Miyajima, M. Kikuchi, A. Takahashi, Tokyo University of Science, Noda, Chiba,JapanPVP2013-98145: DUCTILE FAILURE SIMULATION TO PREDICT BURSTPRESSURES OF STEAM GENERATOR TUBES WITH MULTIPLE AXIALCRACKSH.-S. Lee, N. H. Kim, Y. J. Kim, Korea University, Seoul, Korea (Republic); J. S.Kim, Sunchon National University, Suncheon, Korea (Republic); K. J. Weon,Chosun University, Kwangju, Korea (Republic)PVP2013-97559: FATIGUE CRACK GROWTH FOR SUBSURFACE FLAWSNEAR COMPONENT SURFACE AND PROXIMITY RULESK. Hasegawa, Y. Li, Japan Nuclear Energy Safety Organization, Tokyo, Japan;K. Miyazaki, Hitachi Research Lab, Ibaraki-ken, Japan; K. Saito, Hitachi-GENuclear Energy, Ltd., Ibaraki, JapanSESSION 3.1E (CS-5-1)Wednesday, July 17, 8:30 am – 10:15 am, Level -1, Miles Davis ATECHNICAL HARMONIZATION AND EMERGING CODES ANDSTANDARDS—1Developed by: M. Rana, Praxair, Inc., Tonawanda, NY, USAChair: M. Rana, Praxair, Inc., Tonawanda, NY, USACo-Chair L. Antalffy, Fluor, Sugar Land, TX, USAPVP2013-97086: MOP, MAOP, DP AND MAWP—UNDERSTANDING THEDIFFERENCES TO AVOID UNNECESSARY COSTSJ. Aumuller, University of Alberta, Edmonton, AB, Canada; V. Carucci, CarmagenInc., Rockaway, NJ, USAPVP2013-97645: CASE STUDIES IN LOCAL HEAT TREATMENT OFPRESSURE VESSELS APPLYING WRC 452 PRINCIPLES

38

G. Miller, K. Kirkpatrick, L. Antalffy, Fluor, Sugar Land, TX, USAPVP2013-97989: MATERIALS PROPERTY DATABASE DEVELOPMENT FORASME CODES AND STANDARDSW. Ren, L. Lin, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2013-97532: STRESSES IN NOZZLE SHELL JUNCTIONS DUE TOEXTERNAL LOADS—A COMPARATIVE STUDYD. Chandiramani, S. Nawandar, G. Shyam, Lloyd’s Register Asia, Mumbai,Maharashtra, IndiaSESSION 3.1F (DA-7-1)Wednesday, July 17, 8:30 am – 10:15 am, Level -1, Louis Armstrong A+BTHERMAL STRESSES AND ELEVATED TEMPERATURE DESIGN 1Developed by: A. Segall, Penn State University, University Park, PA, USA; S.

Iyer, Candu Energy, Mississauga, CanadaChair: S. Iyer, Candu Energy, Mississauga, CanadaCo-Chair A. Segall, Penn State University, University Park, PA, USAPVP2013-97596: INTERFACIAL BLISTER EVOLUTION OF COATEDSURFACES UNDER SEVERE THERMAL AND PRESSURE TRANSIENTSJ. Harris, A. Segall, Penn State University, University Park, PA, USA, R. Carter,Army Research Lab, Jarrettsville, MD, USA; D. Robinson, Penn State University,University Park, PA, USAPVP2013-97091: A STUDY FOR PROPOSAL OF WELDED JOINTSTRENGTH REDUCTION FACTORS OF MODIFIED 9CR-1MO STEEL FORJAPAN SODIUM COOLED FAST REACTOR (JSFR)T. Wakai, T. Onizawa, Japan Atomic Energy Agency, O-arai, Ibaraki, Japan; T.Kato, Ascend Co. Ltd., Tokai, Ibaraki, Japan; S. Date, Mitsubishi HeavyIndustries, Ltd., Nagasaki, Nagasaki, Japan; K. Kikuchi, Mitsubishi HeavyIndustries, Ltd., Kobe, Hyogo, Japan; K. Satoh, Mitsubishi FBR Systems, Inc.,Shibuya-ku, Tokyo, JapanPVP2013-97252: FATIGUE AND RATCHETING EXPERIMENTAL RESPONS-ES OF ALLOY 617 UNDER HIGH TEMPERATURE MULTIAXIAL LOADINGS. Quayyum, North Carolina State University, Raleigh, NC, USA; M. Sengupta,MPR Associates, Alexandria, VA, USA; G. Choi, C. J. Lissenden, ThePennsylvania State University, University Park, PA, USA; T. Hassan, NorthCarolina State University, Raleigh, NC, USASESSION 3.1G (DA-4-1)Wednesday, July 17, 8:30 am – 10:15 am, Level -1, Louis Armstrong C+DLIMIT LOAD ANALYSIS 1Developed by: D. Vlaicu, Ontario Power Generation, Pickering, Canada; S.

McGuffie, Porter McGuffie, Inc., Lawrence, KS, USAChair: M. Martin, Rolls-Royce, Derby, Derbyshire, United KingdomCo-Chair D. Vlaicu, Ontario Power Generation, Pickering, CanadaPVP2013-97316: BUCKLING OF CYLINDERS WITH IMPERFECT LENGTHJ. Blachut, University of Liverpool, Liverpool, United KingdomPVP2013-97344: FAILURE ASSESSMENT OF PIPE FITTINGS USINGCONTINUUM DAMAGE MECHANICSN. Bonora, D. Gentile, A. Ruggiero, University of Cassino and Southern Lazio,Cassino, Italy; P. Folgarait, A. Calatroni, Allied Fittings Spa, Piacenza, ItalyPVP2013-97603: CLASSIFICATION OF THIN-WALLED CONICAL VESSELSFOR DESIGN AGAINST AXI-SYMMETRIC PLASTIC COLLAPSE UNDEREXTERNAL PRESSUREP. Meehan, FE Consultants, Brisbane, Queensland, Australia; R. Frith, FrithEngineering Consultants, Brisbane, Queensland, AustraliaPVP2013-97946: LIMIT ANALYSIS INTERACTION FORMULAE FOR THIN-WALLED AND MODERATELY THICK-WALLED PIPES SUBJECTED TOPRESSURE AND PIPE BENDINGM. Möller, L. Hallin, Arena NP Uddcomb AB, Helsingborg, Sweden; M. Veljkovic,Luleå University of Technology, Luleå, SwedenPVP2013-98160: FACTORS AFFECTING STEAM GENERATOR TUBE BOWM. Cao, J. Nelson, H. Charkas, T. Wiger, AREVA NP Inc., Lynchburg, VA, USASESSION 3.1H (DA-1-3)Wednesday, July 17, 8:30 am – 10:15 am, Level 0, Pont De Sully A+BDESIGN AND ANALYSIS OF PRESSURE VESSELS AND COMPONENTS III

Developed by: C. Rodery, BP Corporation North America, Inc., League City,TX, USA; A. Avery, Northwest Redwater Partnership, Calgary,AB, Canada; M. Zhao, Chevron, Houston, TX, USA

Chair: C. Rodery, BP Corporation North America, Inc., League City,TX, USA

Co-Chair: A. Avery, Northwest Redwater Partnership, Calgary, AB,Canada

PVP2013-97644: FREQUENTLY OVERLOOKED HEAT EXCHANGERDESIGN CONDITIONSA. Gutkovsky, J. Taagepera, Chevron ETC, Richmond, CA, USAPVP2013-98028: AN EVALUATION OF THE PROTECTION AGAINST LOCALFAILURE IN ASME SECTION VIII, DIVISION 2: FINITE ELEMENT MODELCONSIDERATIONST. G. Seipp, Becht Engineering Canada, Ltd., Calgary, AB, CanadaPVP2013-97964: EFFECT OF HYDROSTATIC PRESSURE ON BUCKLINGBEHAVIOR OF STORAGE TANKS UNDER LOCAL SUPPORT SETTLEMENTJ. Gong, S. Zeng, T. Jin, Zhejiang University, Hangzhou, ChinaSESSION 3.1I (HT-2-1)Wednesday, July 17, 8:30 am – 10:15 am, Level 0, Pont De Arts ASTRUCTURAL RESPONSE TO HIGHLY DYNAMIC (IMPULSIVE) EVENTS IDeveloped by: A. Clayton, A M Clayton Ltd., Warrington, United Kingdom; P. O

Leslie, Los Alamos National Laboratory, Los Alamos, NM, USAChair: A. Clayton, A M Clayton Ltd., Warrington, United KingdomCo-Chair: P. O Leslie, Los Alamos National Laboratory, Los Alamos, NM,

USAPVP2013-97043: PROTECTION AGAINST LOCAL FAILURE FORIMPULSIVELY LOADED VESSELSA. Clayton, A M Clayton Ltd., Warrington, United Kingdom; T. Duffey, T. A. Duffey,Consulting Engineer, Tijeras, USAPVP2013-97055: EFFECT OF STRUCTURAL DIMENSIONS ON STRAINGROWTH OF CYLINDRICAL VESSELSQ. Dong, Y. Gu, China Academy of Engineering Physics, Mianyang, Sichuan,ChinaPVP2013-97115: RESPONSE OF PIPING TEES TO PROPAGATINGGASEOUS DETONATIONST. Ligon, Dominion Engineering, Inc., Reston, USA; J. Shepherd, CaliforniaInstitute of Technology, Pasadena, CA, USA; D. Gross, Dominion Engineering,Reston, VA, USAPVP2013-97987: EXPERIENCE WITH USING CODE CASE 2564 TO DESIGNAND CERTIFY AN IMPULSIVELY LOADED VESSELB. Haroldsen, Sandia National Laboratories, Manteca, CA, USA; J. Stofleth,Sandia National Laboratories, Albuquerque, NM, USA; M. Yip, Sandia NationalLaboratories, Livermore, CA, USA; A. Caplan, US Army Project Manager forNon-Stockpile Chemical Materiel, Aberdeen Proving Ground, MD, USASESSION 3.1J (SE-9-1)Wednesday, July 17, 8:30 am – 10:15 am, Level 0, Pont De Arts BSEISMIC RESPONSE MITIGATION FOR MECHANICAL STRUCTURES ANDENERGY FACILITIESDeveloped by: T. Ito, Osaka Prefecture University, Sakai City Osaka-pref,

Japan; K. Minagawa, Saitama Institute of Technology, Saitama,Japan

Chair: H. KobayashiCo-Chair A. Maekawa, Institute of Nuclear Safety System, Inc., Fukui,

JapanPVP2013-97072: STUDY ON THE CONTROL OF DISPLACEMENT FORBASE ISOLATION SYSTEMS UTILIZING HIGH VISCOUS LIQUID (EFFECTSOF ECCENTRICITY)T. Ito, N. Nishimatsu, A. Shintani, C. Nakagawa, Osaka Prefecture University,Osaka, JapanPVP2013-97457: DEVELOPMENT OF HIGH ENERGY ABSORBING SEISMICTIE WITH I-SECTIONAL SHAPE FOR THERMAL POWER BOILER STRUC-TUREK. Aida, K. Kawamura, Babcock-Hitachi K.K., Kure-shi, Hiroshima-ken, JapanPVP2013-97560: BASIC STUDY ON VIBRATIONAL BEHAVIOR OF SYSTEMSUPPORTING LARGE-SCALE STRUCTURES SUBJECTED TO MULTIPLE

39

RANDOM INPUTS USING PROBABILISTIC VIBRATION THEORYA. Shintani, K. Tsujita, T. Ito, C. Nakagawa, Osaka Prefecture University, Osaka,JapanPVP2013-97651: SEISMIC RESPONSE ANALYSIS OF INDUSTRIALBUILDING WITH VISCOUS-FRICTION HYBRID DAMPERK. Minagawa, Saitama Institute of Technology, Saitama, Japan; S. Fujita, T.Kawamura, Tokyo Denki University, Tokyo, Japan; G. Tanaka, Oiles Corp,Tochigi, JapanPVP2013-97504: MODELING OF A MAINFRAME SERVER FRAME SUB-JECTED TO SEISMIC LOADINGSB. Notohardjono, S. Canfield, R. Ecker, IBM Corp, Poughkeepsie, NY, USASESSION 3.1K (CT-12-1)Wednesday, July 17, 8:30 am – 10:15 am, Level 0, Pont De Arts CPROBABILISTIC AND RISK BASED ASSESSMENTSymposium of Safety, Reliability and Risk Assessment – Co-Sponsored byComputer Technology & Bolted Joints, Materials & Fabrication, OperationsApplications & Components, Design and Analysis, and Codes & StandardsTechnical CommitteesDeveloped by: M. Wang, Candu Energy Inc., Mississauga, ON, CanadaChair: X. Duan, Candu Energy Inc., Mississauga, ON, CanadaCo-Chair R. Adibiasl, AMEC NSS, Toronto, CanadaPVP2013-97646: DETERMINATION OF TRANSITIONAL SIZE OF METALCLUSTERSY. Park, New Mexico State University, Las Cruces, NM, USA; I. Hijazi, PrinceMohammad Bin Fahd University, Al Khobar, Saudi ArabiaPVP2013-97785: BENCHMARKING PRAISE-CANDU 1.0 WITH NURBIMPROJECT FATIGUE CASESX. Duan, M. Wang, M. Kozluk, Candu Energy Inc., Mississauga, ON, CanadaPVP2013-98010: BENCHMARKING PRAISE-CANDU 1.0 WITH XLPR 1.0M. Wang, X. Duan, M. Kozluk, Candu Energy Inc., Mississauga, ON, CanadaSESSION 3.1L (DA-10-1)Wednesday, July 17, 8:30 am – 10:15 am, Level 2, St. MichelADVANCED DESIGN AND ANALYSIS OF BOLTED JOINTSDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough,

AustraliaChair: R. Noble, 1tegrity, Sunderland, United KingdomCo-Chair S. Krishnamurthy, UOP, Des Plaines, IL, USAPVP2013-97576: ASSESSING FLANGED JOINT LEAKAGE AND TUBE-TO-TUBESHEET JOINT FAILURE DUE TO FLUID TEMPERATUREDIFFERENTIALS IN A FLOATING HEAD HEAT EXCHANGER USING FINITEELEMENT ANALYSISP. Prueter, B. R. Macejko, D. J. Dewees, R. G. Brown, The Equity EngineeringGroup, Inc., Shaker Heights, OH, USAPVP2013-97814: IMPROVED ANALYSIS OF EXTERNAL LOADS ONFLANGED JOINTSW. Brown, Integrity Engineering Solutions, Dunsborough, AustraliaPVP2013-97594: AN ANALYSIS OF A PRESSURE ENERGIZED GASKETM. Ruffin, Chevron, El Segundo, CA, USA; D. Reeves, Chevron, Richmond, CA,USAPVP2013-97813: DISSECTING THE DINOSAUR; PROBLEMS WITH B16.5AND B16.47 FLANGE STANDARDSW. Brown, Integrity Engineering Solutions, Dunsborough, AustraliaSESSION 3.1M (MF-6-1)Wednesday, July 17, 8:30 am – 10:15 am, Level 2, St. Germain Des Pres A+BFFS1Symposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: M. Cohn, Intertek, Sunnyvale, USA; C. E. Jaske, Det Norske

Veritas (USA), Inc., Dublin, OH, USAChair: M. Cohn, Intertek, Sunnyvale, USACo-Chair: C. E. Jaske, Det Norske Veritas (USA), Inc., Dublin, OH, USAPVP2013-97079: FAILURE ANALYSIS OF CORROSION TEST COUPONSAND A FAILED TUBE FROM AN ETHANOL EVAPORATOR

M. Gilkey, FM Global, Norwood, USA; R. Kloos, POET Plant Management, SiouxFalls, SD, USAPVP2013-97108: FLAW CRITICALITY ASSESSMENT FOR CORE SPRAYSPARGER SUPPORT BRACKET SHROUD CRACKINGR. S. Vecchio, Lucius Pitkin Inc., New York, NY, USA; S. R. Gosselin, LuciusPitkin, Inc., Richland, WA, USA; K. Wolfe, Electric Power Research Institute,Palo Alto, CA, USAPVP2013-97871: MULTIPLE CRACK EXTENSION AND TEMPERATUREEFFECT OF PERFORATED PLATE IN ELEVATED FATIGUE TESTO. Watanabe, K. Kinoshita, Y. Suzuki, T. Kumagai, A. Matsuda, University ofTsukuba, Tsukuba, JapanPVP2013-97939: EVALUATION OF EXCESSIVE LOADING EFFECT ONFATIGUE CRACK GROWTH BEHAVIOR BASED ON CRACK BLUNTINGAND STRESS DISTRIBUTION IN FRONT OF THE CRACK TIPY. Yamaguchi, J. Katsuyama, K. Onizawa, Japan Atomic Energy Agency, Tokai,Japan; Y. Li, Japan Nuclear Energy Safety Organization, Tokyo, JapanSESSION 3.1N (FSI-2-9)Wednesday, July 17, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris ATUBE-SUPPORT DYNAMICS AND FRETTING WEARDeveloped by: M. Hassan, University of Guelph, Guelph, ON, Canada; A.

Mohany, University of Ontario Institute of Technology (UOIT),Oshawa, ON, Canada

Chair: T. Nakamura, Osaka Sangyo University, Daito, Osaka, JapanCo-Chair G. Holloway, University of New Brunswick, Fredericton, NB,

CanadaPVP2013-97263: PWR STEAM GENERATOR TUBE AND AVB WEAR UNDERPERPENDICULAR IMPACTINGC. Phalippou, F. Ruffet, E. Herms, CEA, Gif-sur-Yvette, France; F. Balestreri,IRSN, Fontenay-aux-Roses, FrancePVP2013-97751: EFFECT OF SUPPORT DEGRADATION ON THE INTEGRI-TY OF STEAM GENERATOR TUBES SUBJECTED TO FLOW INDUCEDVIBRATIONSM. Hassan, University of Guelph, Guelph, ON, Canada; J. Riznic, CanadianNuclear Safety Commission, Ottawa, ON, CanadaPVP2013-98146: IDENTIFICATION OF THE TURBULENCE FORCE FIELDEXCITATION FROM A SET OF VIBRATORY RESPONSES OF A MULTI-SUPPORTED TUBEJ. Antunes, Instituto Superior Tecnico, Sacavem, Portugal; L. Borsoi, X. Delaune,P. Piteau, Commissariat à l’Energie Atomique et aux Energies Alternatives, Gif-sur-Yvette, FrancePVP2013-97249: A HYBRID FRICTION MODEL FOR DYNAMIC MODELINGOF STICK-SLIP BEHAVIOURR. Azizian, N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC, CanadaSESSION 3.1O (MF-12-1)Wednesday, July 17, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris BFRACTURE TOUGHNESS TESTING AND INTEGRITY ASSESSMENTDeveloped by: A. Sisan, Det Norske Veritas BV, London, United Kingdom; S.

Polasik, Det Norske Veritas Inc., Dublin, OH, USAChair: A. Sisan, Det Norske Veritas BV, London, United KingdomCo-Chair S. Polasik, Det Norske Veritas Inc., Dublin, OH, USAPVP2013-97299: LOW-CONSTRAINT TOUGHNESS TESTING: RESULTS OFA ROUND ROBIN ON A DRAFT SE(T) TEST PROCEDUREW. Tyson, CanmetMATERIALS, Ottawa, ON, Canada; J. Gianetto, CANMET,Hamilton, ON, CanadaPVP2013-97016: FURTHER INSIGHTS ON J-R CURVE BEHAVIOR INPIPELINE STEELS USING LOW CONSTRAINT FRACTURE SPECIMENSD. F. B. Sarzosa, C. Ruggieri, University of Sao Paulo, Sao Paulo, BrazilPVP2013-97639: SIMPLIFIED EQUATIONS FOR PREDICTING SECONDARYSTRESSES AROUND PIPES CIRCUMFERENCEJ. Wang, R. Saraswat, A. Sisan, Det Norske Veritas BV, London, United KingdomPVP2013-98104: FATIGUE LIFE ESTIMATION IN NOTCHED GEOMETRIESS. Cravero, H. Ernst, Tenaris, Campana, ArgentinaPVP2013-97616: CAPACITY ANALYSIS OF PE PIPELINE WITH NON-PLA-NAR DEFECT

40

W. Jiang, J. Zhao, Nanjing University of Technology, Nanjing, Jiangsu, China; D.Chen, Ningbo Special Equipment Inspection Institute, Ningbo, Zhejiang, ChinaSESSION 3.1Q (TW-1-9)Wednesday, July 17, 8:30 am – 10:15 am, Level 2, Les Invalides A+BCOMPUTATIONAL WELD MODELING—PART IDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: F. W. Brust, Engineering Mechanics Corporation of Columbus,

Columbus, OH, USA; D. L. Rudland, US Nuclear RegulatoryCommission, Rockville, MD, USA; M. R. Hill, University ofCalifornia, Davis, CA, USA; R. Dennis, Frazer-NashConsultancy, Bristol, United Kingdom

no textBlock 3.2: Wednesday, July 17 (10:30 am – 12:15 pm)

no textSESSION 3.2A (MF-2-1)Wednesday, July 17, 10:30 am – 12:15 pm, Level -1, Ella Fitzgerald BAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—1Developed by: P.-S. Lam, Savannah River National Laboratory, Aiken, SC,

USA; G. H. B. Donato, FEI University Center, Sao Paulo, BrazilCo-Chair A. Horn, AMEC, Warrington, Cheshire, United KingdomChair: G. H. B. Donato, FEI University Center, Sao Paulo, BrazilPVP2013-97507: DUCTILE TEARING PREDICTION IN WELDS CONSIDER-ING HYDROGEN EMBRITTLEMENTV. Robin, P. Gilles, Areva NP, Paris, France; P. Mourgue, ESI France, Lyon,France; D. Tchoukien, CNES, Paris, FrancePVP2013-97260: EFFECTS OF MULTIPLE FACTORS ON CRACK TIPCONSTRAINT IN WELD JOINTS AND THE PREDICTION OF WELDFRACTURE TOUGHNESSZ. Chen, Y. He, Jiangsu University, Zhenjiang, Jiangsu, China; P.-S. Lam,Savannah River National Laboratory, Aiken, SC, USA; Y.-J. Chao, University ofSouth Carolina, Columbia, SC, USA; X.S. Jin, Southwest Jiaotong University,Chengdu, Sichuan, ChinaPVP2013-97077: A COMPARISON OF FINITE ELEMENT COHESIVE-ZONEMODELLING WITH THE PROCESS-ZONE APPROACH FOR THEPREDICTION OF DELAYED HYDRIDE CRACKINGM. Martin, Rolls-Royce, Derby, Derbyshire, United KingdomPVP2013-97947: EFFECT OF FLAW ORIENTATION ON DELAYED HYDRIDECRACK INITIATION IN ZR-2.5 NB PRESSURE TUBESG. Shek, J. Cui, Kinectrics Inc., Toronto, ON, Canada; D. A. Scarth, KinectricsInc., Mississauga, ON, Canada; S. Xu, Kinectrics, Toronto, ON, CanadaSESSION 3.2B (MF-28-1)Wednesday, July 17, 10:30 am – 12:15 pm, Level -1, Ella Fitzgerald AMANUFACTURING AND MITIGATION PROCESS SIMULATIONDeveloped by: V. Robin, AREVA NP SAS, Paris, France; R. MorinakaChair: D. J. Dewees, The Equity Engineering Group, Inc., Shaker

Heights, OH, USACo-Chair: R. MorinakaPVP2013-97974: INFLUENCE OF HAND DISC GRINDING ON SURFACEINTEGRITY OF NICKEL BASED ALLOYS—NUMERICAL APPROACHS. Youssef, École Nationale d’Ingénieurs de Saint-Étienne, Saint-Étienne,France; O. Calonne, AREVA Centre Technique France, Le Creusot, France; H.Hamdi, École Nationale d’Ingénieurs de Saint-Étienne, Saint-Étienne, FrancePVP2013-97980: CHAINED WELDING AND FINISH TURNING SIMULATIONSOF AUSTENITIC STAINLESS STEEL COMPONENTSF. Valiorgue, Université de Lyon, Saint Etienne, France; A. Brosse, ESI France,Lyon, France; J. Rech, Université de Lyon, Saint Etienne, France; V. Robin, P.Gilles, Areva NP, Paris, France; J. M. Bergheau, Université de Lyon, SaintEtienne, FrancePVP2013-97655: EFFECT OF HAMMER PEENING PROCESSING ONFATIGUE PROPERTY OF WELDED JOINTS AFTER OVERLOADY. Morikage, S. Igi, K. Oi, JFE Steel Corporation, Chiba, JapanPVP2013-97245: MODELLING IMPACTS INDUCED BY SHOOT PEENING

TECHNIQUES FOR THE ASSESSMENT OF SURFACE INTEGRITYV. Robin, P. Gilles, Areva NP, Paris, France; T. Chaise, D. Nelias, J. Li, Universitéde Lyon, Villeurbanne, FrancePVP2013-97214: MODELING AND SIMULATION OF OPTIMAL BLANKDESIGN AND HOT PRESSING PROCESS FOR MANUFACTURING LARGEFRANCIS TURBINES BLADES FROM VERY THICK PLATESZ. Feng, H. Champliaud École de Technologie Supérieure, Montréal, Canada; L.Mathieu, M. Sabourin, Alstom Hydro Canada Inc., Sorel-Tracy, QC, CanadaSESSION 3.2C (CS-26-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level -1, Miles Davis CFATIGUE MONITORING AND RELATED ASSESSMENT METHODS—IIDeveloped by: J. Rudolph, AREVA NP GmbH, Erlangen, Bayern, Germany; B.

Heinz, AREVA NP GmbH, Nürnberg, Germany; S. Bergholz,AREVA NP GmbH, Erlangen, Bayern, Germany

Chair: H. Rothenhöfer, AMTEC Messtechnischer Service GmbH,Lauffen, Germany

Co-Chair B. Heinz, AREVA NP GmbH, Nürnberg, GermanyPVP2013-97181: RECENT EVOLUTION ON THE EDF FATIGUE ASSESS-MENT DEVICEC. Naudin, S. Vidard, EDF/SEPTEN, Villeurbanne, FrancePVP2013-97265: SOPHISTICATED PROCEDURES FOR FATIGUEEVALUATION IN THE FRAMEWORK OF GERMAN KTA CODESJ. Seichter, Siempelkamp Prüf- und Gutachter-Gesellschaft mbH, Dresden,Germany; S. H. Reese, D. Klucke, E.ON Kernkraft GmbH, Hannover, GermanyPVP2013-97395: LONG TERM FATIGUE EVALUATION IN PRIMARY CIRCUITCOMPONENTS WITHIN NUCLEAR POWER PLANTS OPERATED BY E.ONS. H. Reese, D. Klucke, E.ON Kernkraft GmbH, Hannover, GermanyPVP2013-97701: ONLINE MONITORING—FROM CONDITION MONITORINGTO PLANT OPTIMIZATION AND OPERATION PROGNOSISR. Trieglaff, A. Schulz, TUEV NORD SysTec GmbH & Co KG, Hamburg,Germany; D. Rieck, IGN Nord, Greifswald, Germany; R. Wernicke, TUEV NORDSysTec GmbH & Co KG, Hamburg, Germany; J. Wagner, STEAG EnergyServices GmbH, Essen, GermanyPVP2013-98055: STRESS-BASED ENVIRONMENTAL FATIGUEMONITORING OF PWR CHARGING NOZZLET. Gilman, A. Chinthapalli, Structural Integrity Associates, Inc., San Jose, CA,USA; M. Hoehn, Ameren Missouri—Callaway Energy Center, Fulton, MO, USASESSION 3.2D (FSI-6-1)Wednesday, July 17, 10:30 am – 12:15 pm, Level -1, Miles Davis BSESSION 1Developed by: M. Benaouicha, CNRS (National Center for Scientific

Research), Clamart, France; J. HallChair: J. C. Jo, KINS, Daejon, Korea (Republic)Co-Chair E. Longatte, Edf, Chatou, FrancePVP2013-97060: EFFECT OF PRESSURE ON TWO-PHASE MODELING FORVISCOUS POTENTIAL FLOWS. Ahmadi, Tarbiat Modares University, Tehran, IranPVP2013-97592: ON SOME ASPECTS OF FLUID-STRUCTURE INTERAC-TION IN TWO-PHASE FLOWM. Benaouicha, CNRS (National Center for Scientific Research), Clamart,France; J.-A. Astolfi, French Naval Academy Research Institute, Brest, FrancePVP2013-97637: STRUCTURE DYNAMICS ANALYSIS IN INHOMOGE-NEOUS DENSITY FLOWST. E. Rajaomazava III, French Naval Academy Research Institute, Brest, France;M. Benaouicha, CNRS (National Center for Scientific Research), Clamart,France; J.-A. Astolfi, French Naval Academy Research Institute, Brest, FrancePVP2013-97661: STABILITY OF CYLINDER ARRANGEMENT IN POTENTIALFLOWM. Benaouicha, CNRS (National Center for Scientific Research), Clamart,France; E. Longatte, Edf, Chatou, France; F. Baj, LaMSID, Clamart, FranceSESSION 3.2E (CS-5-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level -1, Miles Davis ATECHNICAL HARMONIZATION AND EMERGING CODES ANDSTANDARDS-2

41

Developed by: M. Rana, Praxair, Inc., Tonawanda, NY, USAChair: M. Rana, Praxair, Inc., Tonawanda, NY, USACo-Chair C. Faidy, Tassin, FrancePVP2013-97968: INTERNATIONAL HARMONISATION: A KEY CHALLENGEFOR MECHANICAL COMPONENTS CODES AND STANDARDSC. Faidy, Tassin, FrancePVP2013-97178: BENCH-KJ: BENCHMARK ON ANALYTICAL CALCULA-TION OF FRACTURE MECHANICS PARAMETERS KI AND J FOR CRACKEDPIPING COMPONENTS—PROGRESS OF THE WORKS. Marie, CEA, Gif sur Yvette, France; C. Faidy, Tassin, FrancePVP2013-97857: TECHNICAL BASIS FOR PROPOSED CODE CASE OFALTERNATIVE RULES FOR CLADDING REPAIR BY UNDERWATERELECTROCHEMICAL DEPOSITION IN CLASS 1 AND 2 APPLICATIONSM.-J. Kim, D.-J. Kim, J. S. Kim, H. P. Kim, S. S. Hwang, Korea Atomic EnergyResearch Institute, Daejeon, Korea (Republic)PVP2013-97696: USE OF NUCLEAR MECHANICAL DESIGN CODES ANDFRACTURE MECHANICS PROCEDURES FOR THE UK EPR AT HINKLEYPOINT CM. Gallegillo, EDF Energy, London, United Kingdom; A. Goodfellow, EDFEnergy, Gloucester, United Kingdom; C. Philipp, L. Miles, A. Williams, EDFEnergy, London, United KingdomPVP2013-97438: COMPARISON OF DESIGN REQUIREMENTS FORNUCLEAR STEAM GENERATOR IN THE ASME AND RCC-M CODESJ. Cao, P. Caple, Babcock & Wilcox Canada, Cambridge, ON, CanadaSESSION 3.2F (DA-7-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level -1, Louis Armstrong A+BTHERMAL STRESSES AND ELEVATED TEMPERATURE DESIGN 2Developed by: S. Iyer, Candu Energy, Mississauga, Canada; A. Segall, Penn

State University, University Park, PA, USAChair: A. Segall, Penn State University, University Park, PA, USACo-Chair S. Iyer, Candu Energy, Mississauga, CanadaPVP2013-97406: CREEP DAMAGE EVALUATION FOR FINE GRAINED HAZOF MOD. 9CR STEELS UNDER MULTI-AXIAL STRESS CONDITIONSK. Yoshida, M. Yatomi, IHI Corporation, Yokohama, Japan; M. Tabuchi, NationalInstitute for Materials Science, Tsukuba, Japan; K. Kobayashi, Chiba University,Chiba, JapanPVP2013-97470: DETAIL INVESTIGATION OF OMEGA METHOD FORCREEP ANALYSIS OF PRESSURE VESSEL COMPONENTSF. Vivio, University of Rome Tor Vergata, Rome, Italy; L. Gaetani, Eleo2Engineering srl, Rome, Italy; M. Ferracci, University of Rome Tor Vergata, Rome,Italy; A. Masia, Eleo Engineering, Roma, ItalyPVP2013-97720: USER DESIGN SPECIFICATION PREPARATION FOR 21/4CR-1MO-1/4V (VANADIUM MODIFIED) REACTORS IN ACCORDANCEWITH ASME SECTION VIII DIVISION 2 CODE AND CODE CASE 2605R. Stefanovic, Fluor, Calgary, AB, Canada; A. Avery, Northwest RedwaterPartnership, Calgary, AB, Canada; K. Bardia, Fluor, Los Angeles, CA, USA; R.Kabganian, V. Oprea, Fluor, Calgary, AB, Canada; T. G. Seipp, BechtEngineering Canada, Ltd., Calgary, AB, CanadaPVP2013-98080: DESIGN ON THE INSTALLATION POSITION OF THERMALSTRESS MONITORING SYSTEM FOR CFBC BOILER OF THERMAL POWERPLANTH. G. Kim, S. B. Shin, D.-S. Kim, Hyundai Heavy Industries Co., LTD., Ulsan,Korea (Republic)SESSION 3.2G (DA-4-3)Wednesday, July 17, 10:30 am – 12:15 pm, Level -1, Louis Armstrong C+DSHAKEDOWN AND RATCHETING ANALYSISDeveloped by: D. Vlaicu, Ontario Power Generation, Pickering, Canada; S.

McGuffie, Porter McGuffie, Inc., Lawrence, KS, USAChair: D. Mackenzie, University of Strathclyde, Glasgow, ScotlandCo-Chair D. Vlaicu, Ontario Power Generation, Pickering, CanadaPVP2013-97049: A NEW CONSTITUTIVELY ACCURATE LOWER BOUNDDIRECT SHAKEDOWN METHODA. Jappy, D. Mackenzie, H. Chen, University of Strathclyde, Glasgow, ScotlandPVP2013-97336: SHAKEDOWN BOUNDARY AND LIMIT LOADDETERMINATION OF A 90-DEGREE BACK TO BACK PIPE BEND

SUBJECTED TO STEADY INTERNAL PRESSURES AND CYCLIC IN-PLANEBENDING MOMENTSH. Abdalla, The American University In Cairo, Cairo, EgyptPVP2013-98084: RATCHET BOUNDARY OF A BEAM WITH ARBITRARYCROSS SECTIONR. Adibiasl, AMEC NSS, Toronto, Canada; W. Reinhardt, Candu Energy Inc.,Mississauga, ON, CanadaPVP2013-98090: THE SHAKEDOWN BOUNDARY FOR PARABOLICSTRESS DISTRIBUTION IN NB- 3222.5W. Reinhardt, A. Asadkarami, Candu Energy Inc., Mississauga, ON, CanadaPVP2013-97296: SIMPLIFIED THERMO-ELASTO-PLASTIC ANALYSIS MOD-ELS FOR DETERMINATION OF GLOBAL AND LOCAL STRESSES IN COKEDRUMSY. Zhang, Z. Xia, University of Alberta, Edmonton, AB, CanadaSESSION 3.2H (CS-4-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level 0, Pont De Sully A+BINTERACTION AND FLAW MODELING FOR MULTIPLE FLAWS—IISponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: J. K. Sharples, AMEC Power and Process Europe, Warrington,

United Kingdom; K. Miyazaki, Hitachi Research Lab, HitachiLtd., Ibaraki-ken, Japan

Chair: B. Bezensek, Shell U.K Limited, Aberdeen, Aberdeen, UnitedKingdom

Co-Chair J. K. Sharples, AMEC Power and Process Europe, Warrington,United Kingdom

PVP2013-97580: EVALUATION OF GROWTH OF SUBSURFACE CRACK BYFATIGUE—SIMULATION OF PENETRATION OF INTERNAL FLAW TO SUR-FACE OF THE STRUCTUREM. Kikuchi, S. Yamada, R. Serizawa, Tokyo University of Science, Noda, Chiba,Japan; Y. Li, Northwestern Polytechnical University, Xian, ChinaPVP2013-97709: MULTIPLE CRACKS INTERACTION MODEL AND RESID-UAL LIFE ASSESSMENT METHODS FOR THE HIGH-TEMPERATURESTRUCTUREJ. Si, Shanghai Institute of Special Equipment Inspection and TechnicalResearch, Shanghai, China; F.-Z. Xuan, S. T. Tu, East China University ofScience and Technology, Shanghai, ChinaPVP2013-97463: TREATMENT OF DEFECTS FOUND IN INSPECTION FORTHREADED LOCKING RING HEAT EXCHANGERX. Li, J. Yang, J. Zheng, W. Luo, X. Wu, Guangdong Institute of SpecialEquipment Inspection and Research, Guangzhou, Guangdong, ChinaSESSION 3.2I (HT-2-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level 0, Pont De Arts ASTRUCTURAL RESPONSE TO HIGHLY DYNAMIC (IMPULSIVE) EVENTS IIDeveloped by: T. Ligon, Dominion Engineering, Inc., Reston, USA; D. Gross,

Dominion Engineering, Reston, VA, USAChair: T. Ligon, Dominion Engineering, Inc., Reston, USACo-Chair: D. Gross, Dominion Engineering, Reston, VA, USAPVP2013-97068: A SIMPLIFIED METHOD TO DETERMINE INITIALESTIMATES OF PEAK STRAINS IN COMPOSITE EXPLOSIVE VESSELSA. Clayton, A M Clayton Ltd., Warrington, United KingdomPVP2013-97677: EXPERIMENTAL DETERMINATION OF THE STATICEQUIVALENT PRESSURES OF GAS PHASE DETONATIONS IN PIPES ANDCOMPARISON WITH NUMERICAL MODELSH.-P. Schildberg, BASF, Ludwigshafen, Germany, Germany; J. P. M. Smeulers,TNO Fluid Dynamics, Delft, Netherlands; G. Pape, DTRL, Bergschenhoek,NetherlandsPVP2013-97148: ON THE ADEQUACY OF SHELL MODELS FORPREDICTING STRESSES AND STRAINS IN THICK-WALLED TUBESSUBJECTED TO DETONATION LOADINGN. Bitter, J. Shepherd, California Institute of Technology, Pasadena, CA, USAPVP2013-97998: DESIGN BASIS OF AN IMPULSIVELY LOADED VESSELFOR SPECIFIC LOADING CONFIGURATIONSM. Yip, Sandia National Laboratories, Livermore, CA, USA; B. Haroldsen,Sandia National Laboratories, Manteca, CA, USA

42

PVP2013-98108: EXPERIMENTAL STUDY ON VIBRATION MODES OF ASPHERICAL VESSELY. Gu, Q. Dong, China Academy of Engineering Physics, Mianyang, ChinaSESSION 3.2J (SE-7-1)Wednesday, July 17, 10:30 am – 12:15 pm, Level 0, Pont De Arts BSEISMIC RESPONSE AND DESIGN OF STORAGE TANKS, PIPING ANDOTHER COMPONENTSDeveloped by: T. Taniguchi, Tottori University, Tottori, Japan; A. Maekawa,

Institute of Nuclear Safety System, Inc., Fukui, JapanChair: A. Maekawa, Institute of Nuclear Safety System, Inc., Fukui,

JapanCo-Chair A. Shintani, Osaka Prefecture University, Sakai Osaka, Japan;

K. Minagawa, Saitama Institute of Technology, Saitama, JapanPVP2013-97229: PASSIVE CONTROL OF LIQUID SLOSHING IN FLOATINGROOF TANK WITH MULTI DYNAMIC ABSORBERN. Kobayashi, T. Sato, A. Torisaka, Aoyama Gakuin University, Sagamihara,Kanagawa, JapanPVP2013-97306: APPROXIMATION OF FLUID PRESSURE ON THECYLINDRICAL TANKS IN ROCK WITH THE CRESCENT-LIKE UPLIFT PARTIN THE BOTTOM PLATE BY RADIALLY SLICED TANK MODELT. Taniguchi, Tottori University, Tottori, Japan; T. Shirasaki, Nagasaki Prefecture,Nagasaki, JapanPVP2013-97371: DYNAMIC EXPERIMENTAL INVESTIGATION ON THESELF-VIBRATION CHARACTERISTICS OF LIQUID STORAGE TANKSUNDER SEISMIC EXCITATIONSZ. Fang, China Special Equipment Inspection and Research Institute, Beijing,China; Z. Chen, Zhejiang University, Hangzhou, China; G. Jia, H. Wang, X. Li,China Special Equipment Inspection and Research Institute, Beijing, ChinaPVP2013-97421: A STUDY OF DYNAMIC RESPONSE BEHAVIOR DURINGEARTHQUAKE FOR LARGE LNG STORAGE TANKS IN CONSIDERATIONOF UPLIFTS. Hayashi, T. Taniguchi, Tottori University, Tottori, Tottori, JapanSESSION 3.2K (MF-17-1)Wednesday, July 17, 10:30 am – 12:15 pm, Level 0, Pont De Arts CFRACTURE RELIABILITY AND PROBABILISTIC ASSESSMENT OFFAILURESymposium of Safety, Reliability and Risk Assessment – Co-Sponsored byComputer Technology & Bolted Joints, Materials & Fabrication, OperationsApplications & Components, Design and Analysis, and Codes & StandardsTechnical CommitteesDeveloped by: K. M. Nikbin, Imperial College London, London, United KingdomChair: Z. Wei, Tenneco Inc., Grass Lake, MI, USACo-Chair S. E. Eren, TWI Ltd. (formerly Imperial College London),

Cambridge, United KingdomPVP2013-97063: STATISTICAL ANALYSIS AND MONTE-CARLOSIMULATIONS OF WARM PRESTRESSING OF PRE-CRACKED SMALL SIN-GLE EDGE NOTCH BEND SPECIMENSD. Van Gelderen, University of Bristol, Bristol, United Kingdom; D. Lauerova, M.Posta, V. Pistora, Nuclear Research Institute Řež, Řež, Czech Republic; J. D.Booker, D. Smith, University of Bristol, Bristol, United KingdomPVP2013-97627: A DESIGN APPROACH BASED ON HISTORICAL FATIGUETEST DATA AND BAYESIAN STATISTICSZ. Wei, F. Yang, D. Konson, Tenneco, Grass Lake, MI, USA; K. M. Nikbin,Imperial College London, London, United KingdomPVP2013-97628: STATISTICAL AND PROBABILISTIC ANALYSIS OF THER-MAL-FATIGUE TEST DATA GENERATED USING V-SHAPE SPECIMENTESTING METHODZ. Wei, B. Lin, Tenneco, Grass Lake, MI, USA; K. Ellinghaus, M. Pieszkalla,Tenneco, Edenkoben, Germany; D. G. Harlow, Lehigh University, Bethlehem,PA, USA; K. M. Nikbin, Imperial College London, London, United KingdomPVP2013-97031: STATISTICAL PERFORMANCE EVALUATION OF SOFT(ELASTOMER) SEAT PRESSURE RELIEF VALVESS. Harris, R. Gross, Savannah River Site, North Augusta, SC, USAPVP2013-97326: INVESTIGATION OF ADHESION FORMATION IN NEWSTAINLESS STEEL TRIM SPRING OPERATED PRESSURE RELIEF VALVES

J. Bukowski, Villanova University, Villanova, PA, USA; R. Gross, Savannah RiverSite, North Augusta, SC, USA; W. Goble, exida, LLC, Sellersville, PA, USASESSION 3.2L (DA-10-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level 2, St. MichelASSEMBLY OF BOLTED JOINTSDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough,

Australia; R. Noble, 1tegrity, Sunderland, United KingdomChair: S. Krishnamurthy, UOP, Des Plaines, IL, USACo-Chair W. Brown, Integrity Engineering Solutions, Dunsborough,

AustraliaPVP2013-97863: ASSEMBLY OF GASKETED BOLTED FLANGE JOINTSUSING TORQUE CONTROL OF PRELOAD METHOD: FEA APPROACHM. Abid, Y. M Khan, Ghulam Ishaq Khan Institute of Engineering Sciences andTechnology, Swabi, Pakistan; D. Nash, University of Strathclyde, Glasgow,ScotlandPVP2013-97816: ASSEMBLER QUALIFICATION AND GENERAL REVISIONSFOR ASME PCC-1-2013W. Brown, Integrity Engineering Solutions, Dunsborough, Australia; C. Rodery,BP Corporation North America, Inc., League City, TX, USA; C. C. Neely, BechtEngineering Co., Inc., St. Albans, WV, USAPVP2013-97956: WORKING BOLTS NEAR TO YIELD—THEORY,EXPERIENCE AND RECOMMENDED PRACTICER. Noble, 1tegrity, Sunderland, United KingdomPVP2013-98002: DESIGN CONSIDERATIONS: TORQUE OR TENSION—ADVANTAGES AND DISADVANTAGESR. Noble, 1tegrity, Sunderland, United KingdomSESSION 3.2M (MF-6-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level 2, St. Germain Des Pres A+BFFS2Symposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: M. Cohn, Intertek, Sunnyvale, USA; C. E. Jaske, Det Norske

Veritas (USA), Inc., Dublin, OH, USAChair: C. E. Jaske, Det Norske Veritas (USA), Inc., Dublin, OH, USACo-Chair: M. Cohn, Intertek, Sunnyvale, USAPVP2013-97298: FITNESS-FOR-SERVICE OF STEAM-METHANEREFORMER HOT OUTLET MANIFOLDSC. E. Jaske, S. Finneran, Det Norske Veritas (USA), Inc., Dublin, OH, USAPVP2013-97524: ASSET INTEGRITY MANAGEMENT OF HIGH PRESSUREPIPING SYSTEMS SUBJECT TO CREEPM. Cohn, Intertek, Sunnyvale, USAPVP2013-98037: FLAW SIZE ACCEPTANCE LIMITS FOR A STAINLESSSTEEL PRESSURE VESSELC. Guzman-Leong, S. R. Gosselin, F. A. Simonen, Lucius Pitkin, Inc., Richland,WA, USASESSION 3.2N (FSI-2-10)Wednesday, July 17, 10:30 am – 12:15 pm, Level 3, Le Parc Montsouris AAXIAL AND LEAKAGE-FLOW-INDUCED VIBRATION IIDeveloped by: N. Mureithi, Ecole Polytechnique De Montreal, Montreal, QC,

Canada; D. S. Weaver, McMaster University, Hamilton, ON,Canada

Chair: K. Fujita, Osaka City University, Osaka-prefecture, JapanCo-Chair J. Antunes, Instituto Superior Tecnico, Sacavem, PortugalPVP2013-97525: STABILITY ANALYSIS OF RECTANGULAR PLATES ININCOMPRESSIBLE FLOW WITH FOURIER MULTIPLIER OPERATORSK. Hara, Tokyo Institute of Technology, Tokyo, Japan; M. Watanabe, AoyamaGakuin University, Kanagawa, JapanPVP2013-97845: BASIC STUDY ON MITIGATION OF ANNULAR-FLOW-INDUCED VIBRATION BY CONSIDERING VARIABILITY IN PARAMETERSOF STRUCTURE AND FLUIDA. Shintani, H. Isono, T. Ito, C. Nakagawa, Osaka Prefecture University, Osaka,JapanPVP2013-97880: INSTABILITY OF A SIMPLY-SUPPORTED CYLINDER

43

SUBJECTED TO ANNULAR FLOW OVER A FINITE-LENGTH AT ITS MID-LENGTHH. S. Kang, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic);N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC, Canada; K.-H. Lee,Korea Atomic Energy Research Institute, Daejeon, Korea (Republic)PVP2013-97241: QUASI-STATIC APPROACH OF DAMPING FORCESEXERTED UPON A LONG CYLINDER OSCILLATING IN AN AXIAL FLOWL. Divaret, EDF, Clamart, France; J. Berland, EDF R&D, Chatou, France; H.Berro, EDF R&D, Clamart, France; O. Cadot, O. Doaré, ENSTA ParisTech,Palaiseau, France; P. Moussou, Electricite de France, Clamart 92141, FranceSESSION 3.2O (MF-12-2)Wednesday, July 17, 10:30 am – 12:15 pm, Level 3, Le Parc Montsouris BDYNAMIC FRACTURE AND CRACK ASSESSMENTDeveloped by: X.-K. Zhu, Battelle Memorial Institute, Columbus, USAChair: X.-K. Zhu, Battelle Memorial Institute, Columbus, USACo-Chair S. Cravero, Tenaris, Campana, ArgentinaPVP2013-97013: TRANSIENT DYNAMIC SIMULATION OF THE CRACKPROPAGATION IN A SHOCK TUBE HAVING NATURAL GASESE. Burlutskiy, A*STAR Institute of High Performance Computing (IHPC),Singapore, SingaporePVP2013-98044: PROBABILISTIC ASSESSMENT OF AXIAL CRACK-LIKEFLAWS AND REMAINING LIFE IN ONSHORE PIPELINESS. Polasik, C. Maier, C. E. Jaske, Det Norske Veritas (USA), Inc., Dublin, OH,USA; D. Lee, Det Norske Veritas (Canada) Ltd., Calgary, AB, CanadaPVP2013-97794: FULLY PLASTIC STRAIN-BASED J ESTIMATION SCHEMEFOR CIRCUMFERENTIAL SURFACE CRACKS IN PIPES SUBJECTED TOREELINGL. F. S. Parise, C. Ruggieri, University of Sao Paulo, Sao Paulo, SP, Brazil; N.O’Dowd, University of Limerick, Limerick, IrelandPVP2013-97014: NUMERICAL INVESTIGATION OF THE MASS TRANSFEREFFECT ON THE FRACTURE PROPAGATION CONTROLE. Burlutskiy, A*STAR Institute of High Performance Computing (IHPC),Singapore, SingaporePVP2013-98052: EXISTING METHODS IN DUCTILE FRACTURE PROPAGA-TION CONTROL FOR HIGH STRENGTH GAS TRANSMISSION PIPELINESX. Zhu, Battelle, Columbus, USASESSION 3.2Q (TW-1-9)Wednesday, July 17, 10:30 am – 12:15 pm, Level 2, Les Invalides A+BCOMPUTATIONAL WELD MODELING—PART IIDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptChair: M. Y. A. Younan, American University in Cairo, New Cairo, EgyptPresented by: F. W. Brust, Engineering Mechanics Corporation of Columbus,

Columbus, OH, USA; D. L. Rudland, US Nuclear RegulatoryCommission, Rockville, MD, USA; M. R. Hill, University ofCalifornia, Davis, CA, USA; R. Dennis, Frazer-NashConsultancy, Bristol, United Kingdom

THURSDAY, JULY 18

no textBlock 4.1: Thursday, July 18 (8:30 am – 10:15 am)

no textSESSION 4.1A (MF-2-2)Thursday, July 18, 8:30 am – 10:15 am, Level -1, Ella Fitzgerald BAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—2Developed by: D. A. Scarth, Kinectrics Inc., Mississauga, ON, CanadaChair: D. A. Scarth, Kinectrics Inc., Mississauga, ON, CanadaCo-Chair S. Xu, Kinectrics, Toronto, ON, CanadaPVP2013-97664: CALCULATION OF ELASTIC FRACTURE MECHANICSPARAMETERS ACCOUNTING FOR RESIDUAL STRESSESA. Boulay, EDF/University of Manchester, Sale, United Kingdom; L. Pellet, EDFEnergy UK R&D Centre, London, United Kingdom; R. Bargellini, EDF, Clamart,United Kingdom; Y. Lei, EDF Energy NG, Barnwood, Gloucester, United

KingdomPVP2013-98069: EFFECT OF SEAL WELDING CONDITIONS ON RESIDUALSTRESS FIELD AND FRACTURE MECHANICS PARAMETER AROUNDREMAINING CRACKM. Mochizuki, S. Okano, K. Torigata, Osaka University, Osaka, JapanPVP2013-98156: SCC ASSESSMENT BASED ON PROBABILITY FRACTUREMECHANICS CONSIDERING CRACK INITIATION AND PROPAGATIONUNDER RESIDUAL STRESS FIELDS GENERATED BY MACHINING ANDWELDING PROCESS OF PIPESM. Mochizuki, R. Ihara, Osaka University, Osaka, Japan; J. Katsuyama, M.Udagawa, Japan Atomic Energy Agency, Ibaraki, JapanPVP2013-97618: THE APPLICATION OF COHESIVE ELEMENTS IN NUMER-ICAL SIMULATIONS OF THE INTERGRANULAR FRACTURE IN VORONOICELLULAR MODELSF. Zhang, J. Zhao, Nanjing University of Technology, Nanjing, Jiangsu, ChinaPVP2013-97736: STRESS INTENSITY FACTOR SOLUTIONS FOR WELDSBETWEEN TWO SHEETS OF DIFFERENT MATERIALS AND THICKNESSESUNDER PLANE STRAIN CONDITIONSW.-J. Lai, J. Pan, University of Michigan, Ann Arbor, MI, USA; V.-X. Tran, EDFR&D, Clamart, FranceSESSION 4.1C (DA-3-1)Thursday, July 18, 8:30 am – 10:15 am, Level -1, Miles Davis CLARGE YIELDING ISSUES IN FATIGUEDeveloped by: P. Gilles, Areva NP, Paris, FranceChair: P. Gilles, Areva NP, Paris, FranceCo-Chair R. Noble, 1tegrity, Sunderland, United KingdomPVP2013-97004: RATCHETING PREDICTION USING YIELD SURFACE DIS-TORTION OF BALTOV AND SAWCZUKLA. Nayebi, H. Rokhgireh, Shiraz University, Shiraz, IranPVP2013-97026: CYCLIC FATIGUE IN METAL BELLOWSS. Stelmar, Hyspan Precision Products Inc., Chula Vista, CA, USAPVP2013-97705: DEVELOPMENT OF A MODEL FOR LOW-CYCLE FATIGUEASSESSMENT OF 347 SS BUTT-WELDED JOINTSE. Lang, Technische Universität Darmstadt,, Darmstadt, Germany; J. Rudolph,AREVA GmbH, Erlangen, Bavaria, Germany; H. T. Beier, M. Vormwald,Technische Universität Darmstadt, Darmstadt, GermanyPVP2013-97243: INFLUENCE OF VARIABLE AMPLITUDE FATIGUE LOAD-ING ON AISI 304L STAINLESS STEELA.-L. Gloanec, A. Anis, Ensta Paristech, Palaiseau, France; S. Courtin, AREVANP SAS, Paris, FranceSESSION 4.1D (CS-1-1)Thursday, July 18, 8:30 am – 10:15 am, Level -1, Miles Davis BSTRUCTURAL INTEGRITY OF PRESSURE COMPONENTS—IDeveloped by: Y. Hari, University of North Carolina at Charlotte, Charlotte, USAChair: M. Martin, Rolls-Royce, Derby, Derbyshire, United KingdomCo-Chair Y. Hari, University of North Carolina at Charlotte, Charlotte, USAPVP2013-97566: EVALUATION ON CONSTRAINT EFFECT OF REACTORPRESSURE VESSEL UNDER PRESSURIZED THERMAL SHOCKN. Ogawa, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; T. Hirota,Mitsubishi Heavy Industries, Ltd., Kobe, Japan; K. Yoshimoto, Mitsubishi HeavyIndustries, Ltd., Takasago, Japan; S. Sakaguchi, T. Oumaya, Kansai ElectricPower Co., Inc., Mikata-gun, JapanPVP2013-97687: INTEGRITY EVALUATION OF KOREAN NUCLEARREACTOR PRESSURE VESSEL UNDER PRESSURIZED THERMAL SHOCKCONDITIONS ACCORDING TO JEACS.-C. Kim, Sungkyunkwan University, Suwon, Korea (Republic); S.-M. Lee,Korea Institute of Nuclear Safety, Daejeon, Korea (Republic); D.-H. Cho,Sungkyunkwan University, Suwon, Korea (Republic); J. B. Choi, Y.-B. Kim, H.Chung, Korea Institute of Nuclear Safety, Daejeon, Korea (Republic)PVP2013-98161: INVESTIGATION ON CONSTRAINT EFFECT OF A REAC-TOR PRESSURE VESSEL SUBJECTED TO PRESSURIZED THERMALSHOCKSG. Qian, M. Niffenegger, P. Scherrer Institute, Villigen PSI, SwitzerlandPVP2013-97165: STUDY OF SAFETY RESERVE FACTOR FOR DEFECTACCEPTANCE CRITERIA IN ASME BPV CODE

44

Z. Chen, CSEI, Beijing, Beijing, ChinaPVP2013-97269: PWR AND WWER STEAM GENERATOR TUBE INTEGRITYASSESSMENTR. Krautschneider, Institute of Applied Mechanics Brno, Ltd., Brno, CzechRepublicSESSION 4.1E (CS-28-1)Thursday, July 18, 8:30 am – 10:15 am, Level -1, Miles Davis AFRACTURE AND MECHANICAL PROPERTY PREDICTIONS BY SUB-SIZEDSPECIMENS FOR STANDARDSSponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: B. Strnadel, VSB - Technical University of Ostrava, Ostrava-

Poruba, Czech Republic; P. Dymacek, Institute of Physics ofMaterials, ASCR, Brno, Czech Republic; I. Dlouhy, Institute ofPhysics of Materials, Brno, Czech Republic

Chair: B. Strnadel, VSB - Technical University of Ostrava, Ostrava-Poruba, Czech Republic

Co-Chair: P. Dymacek, Institute of Physics of Materials, ASCR, Brno,Czech Republic

PVP2013-97133: SMALL PUNCH TESTING OF EXPOSED HIGH-PRESSURESTEAM PIPELINESP. Dymacek, F. Dobes, Institute of Physics of Materials, ASCR, Brno, CzechRepublicPVP2013-97170: EVALUATION OF MECHANICAL PROPERTIES OF PRI-MARY CIRCUIT COMPONENTS USING SPT TECHNIQUEM. Brezina, J. Petzova, L. Kupca, VUJE, a.s., Trnava, SlovakiaPVP2013-97171: EVALUATION OF MECHANICAL PROPERTIES OF THEREACTOR PRESSURE VESSEL MATERIALS CHANGES BY SMALL PUNCHTEST APPLICATIONJ. Petzova, M. Brezina, L. Kupca, VUJE, a.s., Trnava, SlovakiaPVP2013-98125: PREDICTIONS OF MECHANICAL PROPERTIES FROMSMALL PUNCH TEST RESULTS USING FE DAMAGE ANALYSESJ.-Y. Jeon, N. H. Kim, Y. J. Kim, Korea University, Seoul, Korea (Republic); S.-Y.Lee, K. J. Weon, Chosun University, Gwangju, Korea (Republic)SESSION 4.1F (MF-19-1)Thursday, July 18, 8:30 am – 10:15 am, Level -1, Louis Armstrong A+BCREEP CRACK INITIATION AND GROWTHSponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: C. M. Davies, Imperial College London, London, United

Kingdom; R. Dennis, Frazer-Nash Consultancy, Bristol, UnitedKingdom; Y. Takahashi, Central Research Institute of ElectricPower Industry, Yokosuka, Japan

Chair: R. Dennis, Frazer-Nash Consultancy, Bristol, United KingdomCo-Chair E. Murakami, Babcock-Hitachi K.K., Kure, Hiroshima, JapanPVP2013-97966: PREDICTION OF THE CRACK GROWTH RATE UNDERCREEP AND NEUTRON IRRADIATION FOR AUSTENITIC STAINLESSSTEELS IN INITIAL, AGED AND IRRADIATED CONDITIONSA. Buchatsky, B. Margolin, A. Gulenko, Russia; A. Kashtanov, Central ResearchInstitute of Structure Material “Prometey”, Saint-Petersburg, RussiaPVP2013-97506: CREEP CRACK GROWTH PREDICTION OF VERY LONGTERM P91 STEEL USING EXTRAPOLATED SHORT-TERM UNIAXIALCREEP DATAS. Maleki, TWI Ltd., Cambridge, United Kingdom; A. Mehmanparast, K. M.Nikbin, Imperial College London, London, United KingdomPVP2013-97417: SPECIMEN GEOMETRY AND SIZE EFFECTS ON THECREEP CRACK GROWTH BEHAVIOUR OF P91 WELDMENTSA. Mehmanparast, Imperial College London, London, United Kingdom; S.Maleki, TWI Ltd., Cambridge, United Kingdom; M. Yatomi, Ihi, Yokohama,Yokohama, Japan; K. M. Nikbin, Imperial College London, London, UnitedKingdomPVP2013-97493: EXPERIMENTS TO DETERMINE THE INFLUENCE OFRESIDUAL STRESS AND ELASTIC FOLLOW-UP ON CREEP CRACK INITIA-TIONA. M. Shirahatti, D. Smith, C. E. Truman, University of Bristol, Bristol, United

KingdomPVP2013-97275: MODELING OF MULTIAXIAL STRESS EFFECTS ON THECREEP RESISTANCE OF HIGH CHROMIUM STEELL. Esposito, Pa.L.Mer., Cassino, Italy; N. Bonora, S. Dichiaro, University ofCassino and Southern Lazio, Cassino, ItalySESSION 4.1G (DA-4-4)Thursday, July 18, 8:30 am – 10:15 am, Level -1, Louis Armstrong C+DNONLINEAR ANALYSIS 1Developed by: D. Vlaicu, Ontario Power Generation, Pickering, Canada; S.

McGuffie, Porter McGuffie, Inc., Lawrence, KS, USAChair: H. Chen, University of Strathclyde, Glasgow, ScotlandCo-Chair D. Vlaicu, Ontario Power Generation, Pickering, CanadaPVP2013-97161: DISPLACEMENT BASED FAILURE CRITERION APPLICA-BLE TO FINITE ELEMENT ANALYSIS RESULTS FOR WALL-THINNEDPIPES UNDER PRESSURE LOADT. Meshii, K. Yoshii, University of Fukui, Fukui, JapanPVP2013-97196: DAMAGE MODELING OF THE LOAD-BEARING CAPACITYOF DAMAGED STEAM GENERATOR TUBES IN NUCLEAR POWER PLANTSS. Gehrlicher, MPA University of Stuttgart, Stuttgart, Germany; X. Schuler, MPAStuttgart, Stuttgart, Baden-Württemberg, Germany; M. Seidenfuss, IMWFUniversity of Stuttgart, Stuttgart, Germany; J. Mahlke, Federal Office forRadiation Protection, Salzgitter, GermanyPVP2013-97649: THE APPLICATION OF COMBINED BUCKLING MODEIMPERFECTIONS ON SHELL STRUCTURESS. Laird, R. Frith, Frith Engineering Consultants, Brisbane, QLD, AustraliaPVP2013-97654: APPLICAITON OF GURSON MODEL TO NI-BASED ALLOYWELD JOINT PIPE WITH AN AXIAL OR A CIRCUMFERENTIAL SURFACEFLAW (PHASE II)K. Hojo, D. Watanabe, Mitsubishi Heavy Industries, Ltd., Kobe, JapanPVP2013-97972: PIPE ELEMENTS CURRENTLY AVAILABLE FORNUCLEAR POWER PIPING ANALYSIS AND THEIR NONLINEAR APPLICA-TIONSL. Zeng, Industry AB, Gothenburg, Sweden; L. Jansson, ÅF-Industry AB,Goteborg, SwedenSESSION 4.1H (MF-3-1)Thursday, July 18, 8:30 am – 10:15 am, Level 0, Pont De Sully A+BMATERIALS FOR HYDROGEN SERVICE IDeveloped by: M. P. H. Brongers, Det Norske Veritas (U.S.A) Inc., Dublin, USA;

A. Duncan, Savannah River National Laboratory, Aiken, SC,USA; C. San Marchi, Sandia National Laboratories, Livermore,CA, USA; Y. Tanaka, Nittetu Sumikin Technology, Futtu-city,Chiba-Pref., Japan; I. Garcia

Chair: M. P. H. Brongers, Det Norske Veritas (U.S.A) Inc., Dublin, USACo-Chair C. San Marchi, Sandia National Laboratories, Livermore, CA,

USAPVP2013-97011: A CONCEPT FOR DEVELOPMENT OF HYDROGEN-RESISTANT AUSTENITIC STEELSV. Gavriljuk, G.V. Kurdyumov Institute for Metal Physics, Kiev, Kiev, Ukraine; B.Shanina, V.Ye. Lashkarev Institute for Semiconductor Physics, Kiev, Kiev,Ukraine; V. Shyvanyuk, S. Teus, G.V. Kurdyumov Institute for Metal Physics,Kiev, Kiev, UkrainePVP2013-97217: THE EFFECT OF MICROSTRUCTURE ON THEHYDROGEN-ASSISTED FATIGUE OF PIPELINE STEELSA. Slifka, E. Drexler, National Institute of Standards and Technology, Boulder,CO, USA; D. G. Stalheim, DGS Metallurgical Solutions, Inc., Vancouver, WA,USA; R. Amaro, D. Lauria, A. E. Stevenson, National Institute of Standards andTechnology, Boulder, CO, USA; L. Hayden, Louis E. Hayden Associates,Bethlehem, PA, USAPVP2013-97231: HYDROGEN DRAGGING BY MOVING DISLOCATION ANDENHANCED LATTICE DEFECT FORMATION IN 316L AND 304 STAINLESSSTEELSK. Takai, M. Kitamura, Sophia University, Tokyo, JapanPVP2013-97355: HYDROGEN-ASSISTED TWIN BOUNDARY FRACTURE OFTYPE 304 AUSTENITIC STAINLESS STEEL AT LOW TEMPERATUREINVESTIGATED BY SCANNING PROBE MICROSCOPY

45

B. An, H. Itouga, T. Iijima, National Institute of Advanced Industrial Science andTechnology, Tsukuba, Ibaraki, Japan; C. San Marchi, B. Somerday, SandiaNational Laboratories, Livermore, CA, USAPVP2013-97812: NUMERICAL ANALYSIS OF HYDROGEN DISTRIBUTION INWELDS OF STAINLESS CLAD STEELS FOR HYDROGEN STORAGE PRES-SURE VESSELSH. Mori, Osaka University, Suita, Osaka, Japan; R. Kayano, Japan Steel WorksLtd., Muroran, Japan; H. Ogiwara, K. Saida, K. Nishimoto, Osaka University,Suita, Osaka, JapanSESSION 4.1I (CS-11-1)Thursday, July 18, 8:30 am – 10:15 am, Level 0, Pont De Arts ACHINESE EXTREME PRESSURE EQUIPMENTDeveloped by: J. Zheng, J. Shi, Zhejiang University, Hangzhou, Zhejiang,

ChinaChair: J. Shi, Zhejiang University, Hangzhou, Zhejiang, ChinaCo-Chair Z. ChenPVP2013-97167: TESTS AND DISCUSSIONS ON THE IMPACT WORK OFTHE S30403 AUSTENITIC STAINLESS STEEL AT 20°C AND -196°CZ. Chen, Beijing University of Chemical Technology, Beijing, China; G. Yang,China Special Equipment Inspection and Research Institute, Beijing, China; .Qian, Beijing University of Chemical Technology, Beijing, China; X. Li, H. Wang,China Special Equipment Inspection and Research Institute, Beijing, Beijing,ChinaPVP2013-97272: CRACK GROWTH ANALYSIS OF HIGH-PRESSURE EQUIP-MENT FOR HYDROGEN STORAGEZ. Y. Li, C. Zhou, Y. Z. Zhao, Z. L. Hua, L. Zhang, Zhejiang University ofTechnology, Hangzhou, Zhejiang Province, China; M. Wen, Shanghai JiaotongUniversity, Shanghai, China; P. Xu, Zhejiang University, Hangzhou, Zhejiang,ChinaPVP2013-98126: NUMERICAL STUDY OF FLOW INDUCED VIBRATION OFTHE TUBE BUNDLE IN A LASH BAFFLE SHELL-AND-TUBE HEATEXCHANGERH. Sun, C. Qian, Beijing University of Chemical Technology, Beijing, Beijing,ChinaPVP2013-97166: STUDY ON WIND-INDUCED VIBRATION OF A SUPER-HIGH TOWERZ. Chen, C. Qian, Beijing University of Chemical Technology, Beijing, China; G.Yang, X. Li, L. Yin, China Special Equipment Inspection and Research Institute,Beijing, ChinaPVP2013-97481: EXPERIMENTAL INVESTIGATION OF THE STRAIN-STRENGTHEN EFFECT ON THE EXISTED I+II MIXED MODE FATIGUECRACK TRANSFORMATION PROPAGATION IN AN AUSTENITE STAINLESSSTEELH. Li, Z. Wang, X. Sun, C. Qian, Beijing University of Chemical Technology,Beijing, ChinaSESSION 4.1J (OAC-6-2)Thursday, July 18, 8:30 am – 10:15 am, Level 0, Pont De Arts BRELIABILITY OF WELDMENTDeveloped by: T. Tahara, T&T Technology, Fujimino-shi, Saitama Pref., Japan;

A. Cheta, Shell Exploration and Production Company, Houston,TX, USA

Chair: T. Tahara, T&T Technology, Fujimino-shi, Saitama Pref., JapanCo-Chair J. Penso, Shell Global Solutions, Cypress, TX, USAPVP2013-97254: DEVELOPMENT OF JWES STANDARD WES7700 FORREPAIR WELDING OF PRESSURE EQUIPMENTT. Tahara, T&T Technology, Fujimino-shi, Saitama Pref., Japan; E. Yamamoto,Eishin Technology, Fujisawa-shi, Kanagawa Pref., Japan; S. Keisuke, ShinkoPlantech Co. Ltd., Yokoham, Japan; Y. Ogayu, Idsemitsu Kasan Co., Ltd., Chiba,Japan; T. Hoshika, Sumitomo Chemical Co., Ltd., Ichihara, Chiba Pref., Japan;T. Murakami, SHI Process Equipment Co., Ltd., Saijo, Japan; Y. Hirai, Lloyd’sRegister, Chiba-shi, Chiba Pref., Japan; F. Minami, Osaka University, Suita,Osaka, JapanPVP2013-97364: ASSESSMENT OF WELD OVERLAY DEFECTS IN A HCUREACTORM. Al Robai, J. Al-Sudairy, J. Joseph, A. Harbi Saudi Aramco, Dhahran, Saudi

ArabiaPVP2013-97550: MITIGATING FAILURES IN FERRITIC-AUSTENITICDISSIMILAR METAL JOINTS IN PETROCHEMICAL INDUSTRYJ. Penso, Shell Global Solutions, Cypress, TX, USA; P. Belanger, Shell CanadaLimited, Scotford, AB, CanadaSESSION 4.1K (CS-10-1)Thursday, July 18, 8:30 am – 10:15 am, Level 0, Pont De Arts CFATIGUE, SCC, FIV AND STRESS INTENSITY FACTOR SOLUTIONSDeveloped by: Y. Li, Japan Nuclear Energy Safety Organization, Tokyo, Japan;

K. Onizawa, Japan Atomic Energy Agency, Tokai, Japan; S. S.Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan

Chair: P. Hoang, Sargent and Lundy, Chicago, IL, USACo-Chair H. Okada, Tokyo University of Science, Noda, JapanPVP2013-97773: DEVELOPMENT OF FATIGUE ASSESSMENT METHODBASED ON FLAW TOLERANCE CONCEPTS. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; T. Shuuhei, TEPCOSystems Corporation, Tokyo, Japan; T. Hirasawa, Central Research Institute ofElectric Power Industry, Yokosuka, Japan; T. Saito, Toshiba Corporation,Yokohama, Japan; I. Saito, Japan Nuclear Safety Institute, Tokyo, Japan; K.Dozaki, The Japan Atomic Power Co, Tokyo, JapanPVP2013-97563: STUDY ON EVALUATION ACCURACY REQUIRED FORSTRESS INTENSITY FACTOR SOLUTIONN. Miura, M. Nagai, Central Research Institute of Electric Power Industry,Yokosuka, Japan; M. Shiratori, Yokohama National University, Yokohama,Kanagawa, JapanPVP2013-97678: FULLY AUTOMATED SCC AND FATIGUE CRACKPROPAGATION ANALYSES ON DEEP SEMI-ELLIPTICAL FLAWSK. Sugawara, H. Koya, H. Okada, Tokyo University of Science, Noda, Chiba,Japan; Y. Li, Japan Nuclear Energy Safety Organization, Tokyo, Japan; K.Osakabe, Mizuho Information & Research Institute, Inc., Tokyo, Japan; H.Kawai, Tokyo University of Science, Suwa, Chino, Nagano, JapanPVP2013-97665: STRESS INTENSITY FACTORS FOR CRACKS WITHLARGE ASPECT RATIO IN PLATE AND CYLINDERY. Li, K. Hasegawa, Japan Nuclear Energy Safety Organization, Tokyo, Japan;K. Osakabe, Mizuho Information & Research Institute, Inc., Tokyo, Japan; H.Okada, Tokyo University of Science, Noda, Japan; H. Doi, Japan Nuclear EnergySafety Organization, Tokyo, JapanPVP2013-97235: IMPROVEMENT OF JET PUMP INLET MIXER IN BOILINGWATER REACTOR FOR MITIGATING FLOW-INDUCED VIBRATION ANDFOULINGM. Watanabe, K. Kinugasa, H. Mori, T. Hagiwara, A. Sayano, ToshibaCorporation, Yokohama, JapanSESSION 4.1L (DA-10-3)Thursday, July 18, 8:30 am – 10:15 am, Level 2, St. MichelPANEL SESSION: INTERNATIONAL PROGRESS IN BOLTED JOINTINTEGRITY—PANEL SESSION IDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough,

AustraliaChair: W. Brown, Integrity Engineering Solutions, Dunsborough,

AustraliaCo-Chair P. Petrunich, Fluid Sealing Assoc, Simpsonville, SC, USAPanelists:H. Lejeune, Cetim, Nantes, FranceT. Sawa, Hiroshima university, Hiroshima Pref., JJapanM. Schaaf, AMTEC Services GmbH, Lauffen, GermanyR. Noble, 1tegrity, Sunderland, United KingdomT. Kobayashi, Numazu College of Technology, Numazu, Shizuoka, JapanSESSION 4.1M (OAC-6-4)Thursday, July 18, 8:30 am – 10:15 am, Level 2, St. Germain Des Pres A+BUSE OF FINITE ELEMENT MODELINGSymposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical Committees

46

Developed by: A. Cheta, Shell Exploration and Production Company, Houston,TX, USA; Y. Shoji, Shoji Technology Consulting, Musashino,Tokyo, Japan

Chair: G. Jung, Shell Global Solutions, Houston, TX, USACo-Chair B. E. Shannon, H SCAN International, Inc., Torrance, CA, USAPVP2013-97129: FEM ANALYSIS ON PRESSURE VESSEL COMPONENTSCONTAINING LTAS AGAINST SEISMIC LOAD USING COMBINED NON-LINEAR ISOTROPIC/KINEMATIC HARDENING MODELR. Zhou, I. Kojima, CHIYODA Corporation, Yokohama, Kanegawa-ken, Japan; T.Kaida, Sumitomo Chemical Co., Ltd., Niihama, Ehime-ken, Japan; H. Tsuji,Tokyo Denki University, Tokyo, JapanPVP2013-97228: EFFECT OF THICKNESS MEASUREMENT PROCEDUREON STRESS ANALYSISN. Yoshida, Sumitomo Chemical Co., Ltd., Niihama, Ehime, Japan; A.Yamaguchi, National Institute of Occupational Safety and Health, Japan, Kiyose,Tokyo, JapanPVP2013-97295: VARIABLE IN TIME BOUNDARY CONDITIONS ANDSTRESSES IN MODELS OF POWER PLANT COMPONENTSJ. Okrajni, Silesian University of Technology, Katowice, Poland; M. Twardawa,RAFAKO S.A., Racibórz, PolandPVP2013-97305: INVESTIGATION OF BURST PRESSURE IN PIPES WITHSQUARE WALL THINNING BY USING FEA AND API579 FFS-1A. Yamaguchi, Yamaguchi, National Institute of Occupational Safety and Health,Japan, Kiyose, Tokyo, JapanSESSION 4.1N (FSI-2-13)Thursday, July 18, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris ASELECTED TOPICS IN FSIDeveloped by: N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,

Canada; T. Nakamura, Osaka Sangyo University, Daito, Osaka,Japan

Chair: L. Baranyi, University of Miskolc, Miskolc-Egyetemvaros,Hungary

Co-Chair G. Ricciardi, CEA Cadarache, St Paul les Dirance, FrancePVP2013-97353: LOW SPEED INSTABILITY OF TWO-DIMENSIONALRECTANGULAR PRISMSK. Matsuda, K. Kato, K. Hisadomi, K. Harada, Kyushu Institute of Technology,Kitakyushu, Fukuoka, JapanPVP2013-97449: WHIRL INSTABILITY OF A ROTATING IMPELLER IN ABAFFLED MIXING VESSELG. Holloway, A. Gerber, C. Cudmore, University of New Brunswick, Fredericton,NB, CanadaPVP2013-98115: AN EXPLORATORY EXPERIMENTAL TECHNIQUE TOPREDICT TWO-PHASE FLOW PATTERN FROM VIBRATION RESPONSEL. E. O. Vidal, O. M. H. Rodriguez, University of São Paulo, São Carlos - SP, SãoPaulo, Brazil; N. Mureithi, Ecole Polytechnique de Montreal, Montreal, QC,CanadaPVP2013-97402: STUDY OF A FLUID-STRUCTURE INTERACTIONINSTABILITY MECHANISM IN A TUBE BUNDLE WITH MULTIPHASE-PODAPPROACHM. Pomarede, LaMSID - EDF R&D, Clamart, France; E. Liberge, A. Hamdouni,LaSIE - Université de La Rochelle, La Rochelle, France; J.-F. Sigrist, DCNS, LaMontagne, France; E. Longatte, Edf, Chatou, FranceSESSION 4.1O (MF-10-1)Thursday, July 18, 8:30 am – 10:15 am, Level 3, Le Parc Montsouris BMECHANISTIC MODELLING OF MATERIALS—IDeveloped by: A. Horn, AMEC, Warrington, Cheshire, United KingdomChair: A. Horn, AMEC, Warrington, Cheshire, United KingdomCo-Chair R. Kulka, Frazer-Nash Consultancy Ltd., Dorking, United

KingdomPVP2013-97216: THE ROLE OF GRAIN SIZE IN PREDICTING CLEAVAGEFRACTURE TOUGHNESS OF PRESSURE VESSEL STEELSM. A. Erickson, Phoenix Engineering Associates, Inc., Davidsonville, MD, USA;K. Cochran, B. R. Bass, P. Williams, Oak Ridge National Laboratory, Oak Ridge,TN, USAPVP2013-97431: COLLECTIVE BEHAVIOUR OF MICRO-CRACKS IN

CLEAVAGE FRACTURE OF RPV STEELSA. Abu-Muharib, A. Jivkov, The University of Manchester, Manchester, UnitedKingdom; P. James, AMEC Clean Energy Europe, Warrington, Cheshire, UnitedKingdom; J. R. Yates, The University of Manchester, Manchester, UnitedKingdomPVP2013-97233: MODELLING OF MICRO-PLASTICITY EVOLUTION INCRYSTALLINE MATERIALSD. Li, B. Golden, N. O’Dowd, University of Limerick, Limerick, IrelandPVP2013-97735: CHARACTERISATION OF A508 STEEL CLEAVAGE INITIA-TION SITES AND LOCAL PLASTICITY USING SURFACE MATCHING TECH-NIQUEF. McKenzie, R. J. Smith, F. Scenini, A. H. Sherry, University of Manchester,Manchester, United Kingdom

no textBlock 4.2: Thursday, July 18 (10:30 am – 12:15 pm)

no textSESSION 4.2A (MF-2-3)Thursday, July 18, 10:30 am – 12:15 pm, Level -1, Ella Fitzgerald BAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—3Developed by: P.-S. Lam, Savannah River National Laboratory, Aiken, SC,

USAChair: A. H. I. Mourad, UAEU, Al-Ain, United Arab Emir.Co-Chair J. K. Sharples, AMEC Power and Process Europe, Warrington,

United KingdomPVP2013-97610: ESTIMATES OF PLASTIC LIMIT LOADS OF THICK-WALLED CYLINDERS WITH NON-IDEALZIED THROUGH-WALL CRACKST. Han, N.-S. Huh, Seoul National University of Science and Technology, Seoul,Korea (Republic); D.-J. Shim, Engineering Mechanics Corp of Columbus,Columbus, OH, USAPVP2013-97867: RANDOMNESS EFFECT OF LOADING AMPLITUDE ANDMEAN STRAIN VALUES IN ELEVATED FATIGUE TEST OF PERFORATEDPLATEO. Watanabe, University of Tsukuba, Tsukuba, Japan; S. Watanabe, K.Imamura, A. Matsuda, University of Tsukuba, Tsukuba, JapanPVP2013-97993: METHODOLOGY FOR THE EXPERIMENTALASSESSMENT OF TRUE STRESS-STRAIN CURVES AFTER NECKINGEMPLOYING CYLINDRICAL TENSILE SPECIMENS: EXPERIMENTS ANDPARAMETERS CALIBRATIONG. H. B. Donato, G. K. Q. Ganharul, FEI University Center, Sao Bernardo doCampo, Sao Paulo, BrazilPVP2013-98040: FRACTURE ASSESSMENT OF X65 STEEL PIPE WITHTHROUGH-WALL CRACK UNDER PURE BENDINGA. H. I. Mourad, J. Altarawneh, UAEU, Al-Ain, United Arab Emir.; A. El-Domiaty,Suez Canal University, Suez, EgyptPVP2013-97924: ADVANCED ASSESSMENT OF THE DUCTILE FRACTUREMECHANISM IN A508 CLASS 3 REACTOR PRESSURE VESSEL STEELUSING LABORATORY X-RAY TOMOGRAPHYM. Daly, F. Leonard, The University of Manchester, Manchester, United Kingdom;J. K. Sharples, AMEC Power and Process Europe, Warrington, United Kingdom;A. H. Sherry, University of Manchester, Manchester, United KingdomSESSION 4.2C (DA-3-2)Thursday, July 18, 10:30 am – 12:15 pm, Level -1, Miles Davis CTHERMAL FATIGUEDeveloped by: S. Courtin, AREVA NP SAS, Paris, FranceChair: S. Courtin, AREVA NP SAS, Paris, FranceCo-Chair T. Said, Electricite de France, Clamart 92141, FrancePVP2013-97510: INVESTIGATIONS ON CRACK PROPAGATION UNDERCYCLICAL THERMO-MECHANICAL LOADINGS FOR A TYPE 304-LSTAINLESS STEEL USED FOR PRESSURIZED WATER REACTORC. Gourdin, CEA, Gif sur Yvette, France; F. Rossillon, EDF SEPTEN,Villeurbanne, France; P. Le Delliou, EDF, Moret sur Loing, France; G. Perez, A.Fissolo, CEA, Gif sur Yvette, FrancePVP2013-97284: A CONSERVATIVE DAMAGE ACCUMULATION METHODFOR THE PREDICTION OF CRACK NUCLEATION UNDER VARIABLE

47

AMPLITUDE LOADING FOR AUSTENITIC STAINLESS STEELT. Said, Electricite de France, Clamart, France; L. Vincent, CEA, Gif sur Yvette,France; J.-C. Le Roux, EDF R&D, Moret sur Loing, FrancePVP2013-97630: ANALYSIS OF MULTI-AXIAL FATIGUE TEST DATA USINGA PATH-DEPENDENT EFFECTIVE STRESS/STRAIN DEFINITIONZ. Wei, Tenneco Inc., Grass Lake, MI, USA; P. Dong, University of New Orleans,New Orleans, LA, USA; R. Batra, Virginia Polytech Institute, Blacksburg, VA,USA; K. M. Nikbin, Imperial College London, London, United KingdomPVP2013-97200: CRACK INITIATION UNDER EQUIBIAXIAL FATIGUE,DEVELOPMENT OF A PARTICULAR EQUIBIAXIAL FATIGUE DEVICEC. Gourdin, S. Bradai, CEA, Gif sur Yvette, France; S. Courtin, AREVA NP SAS,Paris, France; J.-C. Le Roux, EDF R&D, Moret sur Loing, France; C. Gardin,Université de Poitiers ENSMA, Clement Ader, FranceSESSION 4.2D (CS-1-2)Thursday, July 18, 10:30 am – 12:15 pm, Level -1, Miles Davis BSTRUCTURAL INTEGRITY OF PRESSURE COMPONENTS—IIDeveloped by: Y. Hari, The University of North Carolina At Charlotte, Charlotte,

USA; M. Martin, Rolls-Royce, Derby, Derbyshire, UnitedKingdom

Chair: Y. Hari, University of North Carolina at Charlotte, Charlotte, USACo-Chair G. Brar, Guru Nanak Dev Engineering College, Ludhiana,

Punjab, IndiaPVP2013-97653: RETARDATION OF STRESS CORROSION CRACKGROWTH BY CYCLIC OVERLOAD IN STAINLESS STEELT. Saito, C. Narazaki, M. Itow, Toshiba Corporation, Yokohama, JapanPVP2013-97747: Failure Behavior of Structural Square Hollow Section CornerWelded JointH. Singh, G. Brar, Guru Nanak Dev Engineering College, Ludhiana, Punjab,India; H. Singh, Rayat Institute of Engineering and Information Technology,Saheed Bhagat Singh Nagar, Punjab, IndiaPVP2013-97749: A NUMERICAL INVESTIGATION OF RESIDUAL STRESSESIN BUTT WELDED PIPE JOINTG. Brar, Guru Nanak Dev Engineering College, Ludhiana, IndiaPVP2013-97160: STRUCTURAL INTEGRITY FOR NUCLEAR POWER PLANTAGAINST EXCESSIVE LOAD ON DESIGN EXTENSION CONDITIOND. Watanabe, K. Hojo, Mitsubishi Heavy Industries Ltd., Kobe, JapanPVP2013-97137: PERFORMANCE STUDY OF THE SIMPLIFIED THEORY OFPLASTIC ZONES FOR THE FATIGUE CHECKH. Hübel, FH Lausitz, Cottbus, Brandenburg, Germany; A. Willuweit, J. Rudolph,R. Ziegler, H. Lang, AREVA GmbH, Erlangen, Bavaria, Germany; K. Rother, S.Deller, FH München, München, Bavaria, GermanySESSION 4.2E (MF-13-1)Thursday, July 18, 10:30 am – 12:15 pm, Level -1, Miles Davis ASMALL SCALE TESTINGSponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: S. Leen, NUI Galway, Galway, Ireland; T. Hyde, N. Isamu, D.

Kwon, Seoul National University, Seoul, Korea (Republic); B.Strnadel, VSB - Technical University of Ostrava, Ostrava-Poruba, Czech Republic; I. Dlouhy, Institute of Physics ofMaterials, Brno, Czech Republic; P. Dymacek, Institute ofPhysics of Materials, ASCR, Brno, Czech Republic

Chair: C. Hyde, The University of Nottingham, Nottingham, UnitedKingdom

Co-Chair P. E. O’Donoghue, NUI Galway, Galway, IrelandPVP2013-97135: DETERMINATION OF TENSILE PROPERTIES OF POWERPLANT STEELS BY TESTING OF MINIATURE SPECIMENSI. Klevtsov, A. Dedov, Tallinn University of Technology, Tallinn, Harjumaa, EstoniaPVP2013-97673: A TESTING APPARATUS FOR SEM IN-SITU FATIGUETESTING OF SMALL SCALE SPECIMENS AND A DERIVED APPLICATIONJ. Reiser, B. Maier, C. Guster, Montanuniversität Leoben, Leoben, Austria; H.-P.Gänser, MCL Material Center Leoben, Leoben, Austria; R. Pippan, AustrianAcademy of Sciences, Leoben, AustriaPVP2013-98089: USE OF SMALL SPECIMENS FOR EVALUATION OF IRRA-DIATED MATERIALS

M. A. Sokolov, R. Nanstad, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2013-97840: APPLICABILITY OF MINIATURE C(T) SPECIMEN TOEVALUATION OF FRACTURE TOUGHNESS FOR REACTOR PRESSUREVESSEL STEELK. Yoshimoto, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; T. Hirota, H.Sakamoto, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; T. Sugihara, NuclearDevelopment Corporation, Naka-gun, Japan; S. Sakaguchi, T. Oumaya, KansaiElectric Power Co., Inc., Mikata-gun, JapanPVP2013-97361: ESTIMATION OF FRACTURE TOUGHNESS FORMETALLIC MATERIALS USING INSTRUMENTED INDENTATION TEST(Presentation Only)J. Kim, Seoul National University, Seoul, Korea (Republic); K.W. Lee, SamsungElectronics Co., Suwon, Gyeonggi-do, Korea (Republic); S.-W. Jeon, D. Kwon,Seoul National University, Seoul, Korea (Republic)SESSION 4.2F (MF-19-2)Thursday, July 18, 10:30 am – 12:15 pm, Level -1, Louis Armstrong A+BCREEP-FATIGUE AND FRACTURESponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: Y. Takahashi, Central Research Institute of Electric Power

Industry, Yokosuka, Japan; C. M. Davies, Imperial CollegeLondon, London, United Kingdom; R. Dennis, Frazer-NashConsultancy, Bristol, United Kingdom

Chair: C. M. Davies, Imperial College London, London, UnitedKingdom

Co-Chair H. Reece-Barkell, Frazer-Nash Consultancy Ltd., Plymouth,United Kingdom

PVP2013-97221: LINEAR MATCHING METHOD FOR PARAMETRICSTUDIES OF WELDMENTS CREEP-FATIGUE ENDURANCEY. Gorash, H. Chen, University of Strathclyde, Glasgow, Lanarkshire, ScotlandPVP2013-97719: CREEP-FATIGUE TESTS AND LIFE PREDICTION MODELSFOR STRUCTURAL INTEGRITY ASSESSMENT OF 9CR-1MO (GRADE 91)STEELSM. Filippini, R. Catelli, Politecnico di Milano, Milano, Milano, Italy; M. Cristea,Tenaris-Dalmine S.p.A., Dalmine, BG, ItalyPVP2013-97876: EFFECT OF STRAIN RATE AND HOLD TIME IN CREEP-FATIGUE TEST OF PERFORATED PLATEO. Watanabe, M. Kojima, M. Funai, T. Dozaki, A. Matsuda, University of Tsukuba,Tsukuba, JapanPVP2013-98142: THE EFFECT OF DISCONTINUOUS CRACK IN FRACTURETOUGHNESS AND CCG TESTSN. H. Kim, Y. J. Kim, Korea University, Seoul, Korea (Republic); C. M. Davies, K.M. Nikbin, A. Mehmanparast, Imperial College London, London, United KingdomPVP2013-97322: SULFUR EFFECTS ON HIGH-TEMPERATURE CREEP ANDFRACTURE BEHAVIOR OF 25CR35NI-NB ALLOYST. Chen, C. Xuedong, J. Ye, X. Hao, Hefei General Machinery Research Institute,Hefei, Anhui, ChinaSESSION 4.2G (CT-9-1)Thursday, July 18, 10:30 am – 12:15 pm, Level -1, Louis Armstrong C+DCOMPUTATIONAL TOPICS IN EXPLICIT FEADeveloped by: W. Reinhardt, Candu Energy Inc., Mississauga, ON, CanadaChair: R. Adibiasl, AMEC NSS, Toronto, CanadaCo-Chair W. Reinhardt, Candu Energy Inc., Mississauga, ON, CanadaPVP2013-97992: MESH CONVERGENCE STUDIES FOR THICK SHELLELEMENTS DEVELOPED BY THE ASME SPECIAL WORKING GROUP ONCOMPUTATIONAL MODELINGD. Molitoris, Westinghouse Electric Co., LLC, Cranberry Township, PA, USA; G.Bjorkman, US Nuclear Regulatory Commission, Rockville, MD, USA; C.-F. Tso,ARUP, Kingston upon Thames, Surrey, United Kingdom; M. Yaksh, NACInternational, Lilburn, GA, USAPVP2013-97997: HOURGLASS CONTROL CONVERGENCE STUDIES FORHEXAHEDRAL ELEMENTS DEVELOPED BY THE ASME SPECIALWORKING GROUP ON COMPUTATIONAL MODELINGD. Molitoris, Westinghouse Electric Co., LLC, Cranberry Township, PA, USA; G.Bjorkman, US Nuclear Regulatory Commission, Rockville, MD, USA; C.-F. Tso,

48

ARUP, Kingston upon Thames, Surrey, United Kingdom; M. Yaksh, NACInternational, Lilburn, GA, USAPVP2013-97999: MESH CONVERGENCE STUDIES FOR HEXAHEDRALELEMENTS DEVELOPED BY THE ASME SPECIAL WORKING GROUP ONCOMPUTATIONAL MODELINGC.-F. Tso, ARUP, Kingston upon Thames, Surrey, United Kingdom; G. Bjorkman,US Nuclear Regulatory Commission, Rockville, MD, USA; D. Molitoris,Westinghouse Electric Co., LLC, Cranberry Township, PA, USA; S. Snow,Battelle Energy Alliance, Idaho Falls, ID, USA; D. Ammerman, Sandia NationalLaboratories, Albuquerque, NM, USA; M. Yaksh, NAC International, Lilburn, GA,USAPVP2013-97482: THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OFRIGID FLANGED SHAFT COUPLING SUBJECTED TO TWISTING MOMENTK. Okayama, T. Fukuoka, Kobe University, Kobe, JapanSESSION 4.2H (MF-3-2)Thursday, July 18, 10:30 am – 12:15 pm, Level 0, Pont De Sully A+BMATERIALS FOR HYDROGEN SERVICE IIDeveloped by: M. P. H. Brongers, Det Norske Veritas (U.S.A) Inc., Dublin, USA;

A. Duncan, Savannah River National Laboratory, Aiken, SC,USA; C. San Marchi, Sandia National Laboratories, Livermore,CA, USA; Y. Tanaka, Nittetu Sumikin Technology, Futtu-city,Chiba-Pref., Japan; I. Garcia

Chair: M. P. H. Brongers, Brongers, Det Norske Veritas (U.S.A) Inc.,Dublin, USA

Co-Chair I. GarciaPVP2013-97365: MECHANICAL PROPERTIES OF HIGH NITROGEN—HIGHSTRENGTH STAINLESS STEELS IN HIGH PRESSURE GASEOUSHYDROGEN ENVIRONMENTJ. Nakamura, T. Omura, Y. Tomio, H. Hirata, M. Terunuma, T. Osuki, E. Dan,Nippon steel & Sumitomo Metal Corporation, Amagasaki, Hyogo, JapanPVP2013-97381: IMPROVED RELIABILITY OF SMALL PUNCH TESTING BYCORRECTION OF TESTING SYSTEM STIFFNESS AND MEASUREMENT OFHYDROGEN SENSITIVITYS. H. Nahm, H. M. Lee, J. S. Park, I. H. Chung, U. B. Baek, Korea ResearchInstitute of Standards and Science, Daejeon, Korea (Republic)PVP2013-97259: CHARACTERISTICS OF CORROSION FATIGUE CRACKGROWTH IN SALT WATER OF ALUMINUM ALLOYS FOR HYDROGEN GASCONTAINERST. Ogawa, Y. Sugiyama, Aoyama Gakuin University, Sagamihara, Kanagawa,Japan; T. Kanezaki, H. Noboru, Honda R&D Co., Ltd., Haga-cho, Haga-gun,Tochigi, JapanPVP2013-97538: HYDROGEN-ASSISTED FRACTURE OF TYPE 316L TUB-ING AND ORBITAL WELDSC. San Marchi, L. Hughes, Sandia National Laboratories, Livermore, CA, USA;X. Tang, Swagelok Co., Solon, OH, USA; B. Somerday, Sandia NationalLaboratories, Livermore, CA, USAPVP2013-97877: J RESISTANCE PROPERTIES OF CR-MO STEELS WITHINTERNAL HYDROGEN MEASURED BY MEANS OF POTENTIAL DROPMETHODS. Konosu, Ibaraki University, Hitachi, Japan; H. Shimazu, R. Fukuda, T. Horibe,Ibaraki University, Hitachi, JapanSESSION 4.2I (CS-11-2)Thursday, July 18, 10:30 am – 12:15 pm, Level 0, Pont De Arts AINTEGRITY MANAGEMENT USING ACOUSTIC EMISSIONDeveloped by: G. Jia, X. Li, China Special Equipment Inspection and Research

Institute, Beijing, ChinaChair: G. Jia, China Special Equipment Inspection and Research

Institute, Beijing, ChinaCo-Chair X. Li, China Special Equipment Inspection and Research

Institute, Beijing, ChinaPVP2013-97120: RESEARCH ON FAILURE MECHANISM OF CARBONFIBER COMPOSITE MATERIALS BASING ON ACOUSTIC EMISSIONY. Liu, W. Li, B. Wang, F. Xia, S. Han, C. He, B. Yu, Hangzhou Special EquipmentInspection Institute, Hanghzou, ChinaPVP2013-97126: ACOUSTIC EMISSION TEST OF PRESSURE VESSEL

LEAKAGEZ. Z. Zhang, H. Liang, C. Ye, W. Cai, J. Jiang, Nanjing Institute of Boiler andPressure Vessel Inspection, Nanjing, ChinaPVP2013-97244: EXPERIMENTAL RESEARCH OF ACOUSTIC EMISSIONINSPECTION ON STRESS CORROSION CRACK FOR SMALL PRESSUREVESSELZ. Z. Zhang, H. Liang, C. Ye, W. Cai, J. Jiang, Nanjing Institute of Boiler andPressure Vessel Inspection, Nanjing, ChinaPVP2013-97302: RESEARCH ON ACOUSTIC EMISSION SIGNALSCHARACTERISTICSZ. Z. Zhang, H. Liang, W. Cai, C. Ye, J. Jiang, Q. Cui, Nanjing Boiler & PressureVessel Supervision and Inspection Research University, Nanjing, ChinaPVP2013-97333: ACOUSTIC EMISSION TESTING OF HIGH STRENGTHSTEEL LPG SPHERICAL TANKSJ. Jun, Y. Rong, Q. Lili, Nanjing Boiler and Pressure Vessel Inspection ResearchInstitute, Nanjing, ChinaSESSION 4.2J (SE-8-2)Thursday, July 18, 10:30 am – 12:15 pm, Level 0, Pont De Arts BBASE ISOLATION AND STRUCTURAL CONTROL TECHNOLOGY IIDeveloped by: O. Furuya, Tokyo City University, Tokyo, JapanChair: C. Tsai, Feng Chia University, Taichung 407, TaiwanCo-Chair O. Furuya, Tokyo City University, Tokyo, JapanPVP2013-97572: LIFE-CYCLE COST ASSESSMENT OF SEISMICALLYBASE-ISOLATED LARGE TANKS IN LNG PLANTSH. Wang, D. Weng, Tongji University, Shanghai, Shanghai, ChinaPVP2013-97686: STUDY ON A COMBINED ISOLATION METHOD FORLARGE LNG STORAGE TANKS IN SOFT SITED. Weng, S. Liu, Tongji University, Shanghai, Shanghai, ChinaPVP2013-97775: INVESTIGATION OF SOIL-STRUCTURE INTERACTIONAND HIGHER-MODE EFFECTS ON DYNAMIC RESPONSE OF BASE-ISOLATED STRUCTURE FOUNDED ON HALF SPACEC.-S. Tsai, H.-C. Su, Feng Chia University, Taichung, TaiwanPVP2013-97776: ROLE OF SOIL-STRUCTURE INTERACTION IN BASE-ISOLATED STRUCTURES FOUNDED ON SOIL STRATUM OVERLYINGHALF SPACEC.-S. Tsai, H.-C. Su, Feng Chia University, Taichung, TaiwanPVP2013-97267: RESPONSE ANALYSIS OF A SEISMIC ISOLATEDSTRUCTURE CONSIDERING NONLINEARITY OF RUBBER BEARINGSB. Alexandre, S. Fujita, Tokyo Denki University, Tokyo, Japan; K. Minagawa,Saitama Institute of Technology, Saitama, JapanSESSION 4.2K (CS-10-2)Thursday, July 18, 10:30 am – 12:15 pm, Level 0, Pont De Arts CSTRUCTURAL INTEGRITY OF RPVDeveloped by: Y. Li, Japan Nuclear Energy Safety Organization, Tokyo, Japan;

K. Onizawa, Japan Atomic Energy Agency, Tokai, Japan; S. S.Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan

Chair: N. Soneda, Central Research Institute of Electric PowerIndustry, Yokosuka, Kanagawa, Japan

Co-Chair J. Katsuyama, Japan Atomic Energy Agency, Ibaraki, JapanPVP2013-98164: ALTERNATIVE REFERENCE TEMPERATURE BASED ONMASTER CURVE APPROACH IN JAPANESE REACTOR PRESSUREVESSEL STEELT. Hirota, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; T. Hirano, IHI,Yokohama, Kanagawa, Japan; K. Onizawa, Japan Atomic Energy Agency, Tokai,JapanPVP2013-97897: FRACTURE TOUGHNESS EVALUATION OF REACTORPRESSURE VESSEL STEELS BY MASTER CURVE METHOD USING MINI-CT SPECIMENST. Tobita, Y. Nishiyama, T. Ohtsu, M. Udagawa, J. Katsuyama, K. Onizawa,Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki-ken, JapanPVP2013-97936: A ROUND ROBIN PROGRAM OF MASTER CURVEEVALUATION USING MINIATURE C(T) SPECIMENS—2ND REPORT:FRACTURE TOUGHNESS COMPARISON IN SPECIFIED LOADING RATECONDITIONM. Yamamoto, Central Research Institute of Electric Power Industry, Yokosuka,

49

Kanagawa, Japan; K. Onizawa, Japan Atomic Energy Agency, Tokai, Japan; K.Yoshimoto, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; T. Ogawa,Toshiba Corporation, Yokohama, Japan; Y. Mabuchi, Hitachi-GE Nuclear EnergyLtd., Hitachi, Japan; N. Miura, Central Research Institute of Electric Power Indus,Yokosuka, JapanPVP2013-98076: HIGH FLUENCE SURVEILLANCE DATA ANDRECALIBRATION OF RPV EMBRITTLEMENT CORRELATION METHOD INJAPANN. Soneda, Central Research Institute of Electric Power Industry, Yokosuka,Kanagawa, Japan; K. Nishida, Japan; K. Dohi, K. Nakashima, Central ResearchInstitute of Electric Power Industry, Komae, Tokyo, JapanPVP2013-97923: STRUCTURAL INTEGRITY EVALUATION OF REACTORPRESSURE VESSELS DURING PTS EVENTS USING DETERMINISTIC ANDPROBABILISTIC FRACTURE MECHANICS ANALYSISK. Osakabe, H. Nishikawa, Mizuho Information & Research Institute, Inc.,Chiyoda-ku, Tokyo, Japan; K. Masaki, J. Katsuyama, K. Onizawa, Japan AtomicEnergy Agency, Tokai-mura, Ibaraki, JapanSESSION 4.2L (DA-10-4)Thursday, July 18, 10:30 am – 12:15 pm, Level 2, St. MichelPANEL SESSION: INTERNATIONAL PROGRESS IN BOLTED JOINTINTEGRITY—PANEL SESSION IIDeveloped by: W. Brown, Integrity Engineering Solutions, Dunsborough,

AustraliaChair: W. Brown, Integrity Engineering Solutions, Dunsborough,

AustraliaCo-Chair P. Petrunich, Fluid Sealing Assoc, Simpsonville, SC, USAPanelists:J. Veiga, Teadit Industria e Comercio Ltda, Rio de Janeiro, BrazilW. Brown, Integrity Engineering Solutions, Dunsborough, AustraliaT. Kobayashi, Numazu College of Technology, Numazu, Shizuoka, JJapanSESSION 4.2M (OAC-6-5)Thursday, July 18, 10:30 am – 12:15 pm, Level 2, St. Germain Des Pres A+BCONTINUED SAFE OPERATION—CASE HISTORIESSymposium of Fitness for Service and Related Issues—Co-Sponsored byDesign & Analysis, Materials & Fabrication, Codes & Standards, andOperations, Applications, & Components Technical CommitteesDeveloped by: T. Tahara, T&T Technology, Fujimino-shi, Saitama Pref., Japan;

A. Cheta, Shell Exploration and Production Company, Houston,TX, USA

Chair: T. Tahara, T&T Technology, Fujimino-shi, Saitama Pref., JapanCo-Chair Y. Shoji, Shoji Technology Consulting, Musashino, Tokyo, JapanPVP2013-97227: CHRONOLOGICAL REVIEW OF MANUFACTURING TECH-NOLOGIES AND CONSIDERATION FOR MAINTENANCE/INSPECTION FORHEAVY WALL HYDROPROCESSING REACTORST. Tahara, T&T Technology, Fujimino-shi, Saitama Pref., Japan; R. Kayano,Japan Steel Works Ltd., Muroran, Japan; T. Kikuchi, IDEMITSU, Chiba, Japan;L. Antalffy, Fluor, Sugar Land, TX, USAPVP2013-98070: LATEST DEVELOPMENTS IN OPTIMIZING REFORMERTUBE LIFE THROUGH ADVANCED INSPECTION AND REMAINING LIFEASSESSMENT TECHNOLOGYB. E. Shannon, H SCAN International, Inc., Torrance, CA, USA; C. E. Jaske, DetNorske Veritas (USA), Inc., Dublin, OH, USAPVP2013-97933: FITNESS-FOR-SERVICE ASSESSMENT OF15NICUMONB5 (WB36) BOILER DRUMS. Humphrey, C.-M. Lee, TWI Ltd., Cambridge, United Kingdom; F. Hammad,Ras Lanuf Oil & Gas Processing Co, Benghazi, LibyaSESSION 4.2N (FSI-2-14)Thursday, July 18, 10:30 am – 12:15 pm, Level 3, Le Parc Montsouris APIPING VIBRATIONS AND ACOUSTICS IVDeveloped by: P. Moussou, Electricite de France, Clamart 92141, FranceChair: A. Mohany, University of Ontario Institute of Technology,

Oshawa, ON, CanadaCo-Chair S. Belfroid, TNO, Delft, NetherlandsPVP2013-97385: U-RANS MODEL FOR THE PREDICTION OF THE

ACOUSTIC SOUND POWER GENERATED IN A WHISTLING CORRUGATEDPIPEJ. Golliard, TNO, Delft, Netherlands; G. Nakiboglu, Technische UniversityEindhoven, Eindhoven, Netherlands; N. G. Diez, S. Belfroid, TNO, Delft,Netherlands; A. Hirschberg, Eindhoven University of Technology, Eindhoven,NetherlandsPVP2013-97676: APPLICATION OF THE TRANSFER MATRIX METHOD TOTHE ANALYSIS OF HYDRO-MECHANICAL VIBRATION OF NPP PIPINGI. Orynyak, S. Radchenko, IPP-Centre Ltd., Kiev, Ukraine; I. Dubyk, IPP-CentreLtd., Kiev, UkrainePVP2013-97692: ACOUSTIC RESONANCE OF A STEAM-LINE GATE VALVEP. Lafon, R. Lacombe, F. Crouzet, F. Daude, LaMSID/EDF, Clamart, France; S.R. Ziada, McMaster University, Hamilton, ON, Canada; C. Bailly, Ecole Centralede Lyon, Ecully, FrancePVP2013-97820: EXPERIMENTAL EVALUATION OF RESONANCEFREQUENCY AT BRANCH SECTION IN EACH DRY AND WET STEAM FLOWY. Uchiyama, R. Morita, Central Research Institute of Electric Power Industry,Komae-shi, Tokyo, JapanSESSION 4.2O (MF-10-2)Thursday, July 18, 10:30 am – 12:15 pm, Level 3, Le Parc Montsouris BMECHANISTIC MODELLING OF MATERIALS—IIDeveloped by: A. Horn, AMEC, Warrington, Cheshire, United KingdomChair: P. James, AMEC Clean Energy Europe, Warrington, Cheshire,

United KingdomCo-Chair R. Kulka, Frazer-Nash Consultancy Ltd., Dorking, United

KingdomPVP2013-97201: FRAMEWORK FOR KEY INFLUENCES ON TENSILESTRAIN CAPACITY OF FLAWED GIRTH WELDSS. Hertelé, R. Denys, Ghent University, Gent, Belgium; A. Horn, AMEC,Warrington, Cheshire, United Kingdom; K. Van Minnebruggen, W. De Waele,Ghent University, Gent, BelgiumPVP2013-97017: ANALYSING THE NOTCH EFFECT WITHIN THE DUCTILE-TO-BRITTLE TRANSITION ZONE OF S275JR STEELS. Cicero, T. García, V. Madrazo, J. Cuervo, E. Ruiz, F. Gutiérrez-Solana,University of Cantabria, Santander, SpainPVP2013-97517: PREDICTION OF SENB FRACTURE TOUGHNESS FROMCHARPY DATA USING THE BEREMIN MODEL IN THE LOWER TRANSITIONREGIONR. J. Smith, A. H. Sherry, University of Manchester, Manchester, UnitedKingdom; A. C. Bannister, Tata Steel Research Development and Technology,Rotherham, South Yorkshire, United Kingdom; A. Horn, AMEC, Warrington,Cheshire, United KingdomPVP2013-97562: FAILURE PREDICTION OF CURVED WIDE PLATES USINGTHE STRAIN-BASED FAILURE ASSESSMENT DIAGRAM WITHCORRECTION FOR CONSTRAINT AND NOTCH RADIUSA. Horn, AMEC, Warrington, Cheshire, United Kingdom; M. Trull, Tata SteelRD&T, Rotherham, S Yorks, United Kingdom; S. Hertelé, Ghent University, Gent,Belgium

no textBlock 4.3: Thursday, July 18 (2:00 pm – 3:45 pm)

no textSESSION 4.3A (MF-2-4)Thursday, July 18, 2:00 pm – 3:45, Level -1, Ella Fitzgerald BAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—4Developed by: J. Wang, Oak Ridge National Laboratory, Oak Ridge, TN, USAChair: Y. J. Kim, Korea University, Seoul, Korea (Republic)Co-Chair: J. Wang, Oak Ridge National Laboratory, Oak Ridge, TN, USAPVP2013-98051: DETERMINATION OF J-R CURVES FOR DISSIMILARMETAL WELDS USING NORMALIZATION METHOD AND COMPACT TEN-SION SPECIMENSX.-K. Zhu, Battelle Memorial Institute, Columbus, USA; D.-J. Shim, EngineeringMechanics Corp of Columbus, Columbus, OH, USA; P. Scott, Battelle,Columbus, OH, USA; D. L. Rudland, US Nuclear Regulatory Commission,Rockville, MD, USA

50

PVP2013-98128: COMPARISON OF J RESISTANCE CURVES FROMTOUGHNESS TESTING SPECIMENS WITH THOSE FROM VARIOUSCRACKED PIPE TESTSJ.-H. Kim, J.-J. Han, Y. J. Kim, Korea University, Seoul, Korea (Republic); D.-J.Shim, Engineering Mechanics Corp of Columbus, Columbus, OH, USAPVP2013-97870: J INTEGRAL IN ELASTO-PLASTICITY BY PATH INTEGRALMETHOD AND VIRTUAL CRACK EXTENSION METHOD IN 2-DIMENSIONALPROBLEMO. Watanabe, K. Chang, Y. Ohmura, A. Matsuda, University of Tsukuba,Tsukuba, JapanPVP2013-98018: EFFECTS OF SIDE-GROOVES AND 3-D GEOMETRIES ONCOMPLIANCE SOLUTIONS AND CRACK SIZE ESTIMATIONS APPLICABLETO C(T), SE(B) AND CLAMPED SE(T) SPECIMENSG. H. B. Donato, F. Moreira, FEI University Center, Sao Bernardo do Campo,Sao Paulo, BrazilSESSION 4.3C (DA-3-3)Thursday, July 18, 2:00 pm – 3:45, Level -1, Miles Davis CFATIGUE DESIGNDeveloped by: J. Rudolph, AREVA GmbH, Erlangen, Bavaria, GermanyChair: J. Rudolph, AREVA GmbH, Erlangen, Bavaria, GermanyCo-Chair P. Van Beek, TNO, Delft, NetherlandsPVP2013-97503: THE QUALIFICATION OF BWR STEAM DRYERWELDMENTS EXPOSED TO CYCLIC LOADING USING FINITE ELEMENTMETHODSM. Breach, H. Mehta, GE-Hitachi Nuclear Energy, Wilmington, NC, USAPVP2013-97883: DEVELOPMENT OF INVERSE ANALYSIS OF HEATCONDUCTION AND THERMAL STRESS FOR ELBOW (PART I)S. Ioka, Osaka Electro-Communication University, Osaka, Japan; S. Kubo,Osaka University, Osaka, Japan; M. Ochi, Mitsubishi Heavy Industries, Ltd.,Takasago, Japan; K. Hojo, Mitsubishi Heavy Industries Ltd., Kobe, JapanPVP2013-97620: DEVELOPMENT OF INVERSE ANALYSIS OF HEAT CON-DUCTION AND THERMAL STRESS FOR ELBOW (PART II)K. Hojo, Mitsubishi Heavy Industries Ltd., Kobe, Japan; M. Ochi, MitsubishiHeavy Industries, Ltd., Takasago, Japan; S. Ioka, Osaka Electro-CommunicationUniversity, Osaka, Japan; S. Kubo, Osaka University, Osaka 565-0871, JapanPVP2013-97787: OVERVIEW OF THE FATIGUE DESIGN DISCUSSIONS INTHE UNITED STATES FROM THESE PAST 10 YEARSR. Gurdal, AREVA NP, Lynchburg, VA, USA; H. Harrison, AREVA NP, Inc.,Lynchburg, VA, USASESSION 4.3E (MF-13-4)Thursday, July 18, 2:00 pm – 3:45, Level -1, Miles Davis ASMALL-SCALE AND MINIATURE TESTINGSponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: S. Leen, NUI Galway, Galway, IrelandChair: B. Strnadel, VSB - Technical University of Ostrava, Ostrava-

Poruba, Czech RepublicCo-Chair S. Leen, NUI Galway, Galway, IrelandPVP2013-97545: INFLUENCE OF TESTING ENVIRONMENT ON SP CREEPRUPTURE LIVESK. Kobayashi, Chiba University, Chiba, JapanPVP2013-97753: DERIVATION OF THE DEPTH DEPENDENT MECHANICALCHARACTERISTICS OF ION-IRRADIATED F82H STEELS BY USING AFINITE ELEMENT ANALYSISJ. M. Kim, C. S. Shin, S. H. Noh, B. Lee, Korea Atomic Energy ResearchInstitute, Daejeon, Korea (Republic)PVP2013-97041: MINIMUM FATIGUE PRE-CRACK EXTENSION FOR FRAC-TURE TESTINGC. L Walters, L. O Voormeeren, TNO, Delft, ZH, NetherlandsPVP2013-98162: THE SIZE EFFECT IN TENSILE TEST OF STEELSB. Strnadel, J. Brumek, VSB-Technical University of Ostrava, Ostrava, CzechRepublicSESSION 4.3F (MF-19-3)Thursday, July 18, 2:00 pm – 3:45, Level -1, Louis Armstrong A+B

CREEP DEFORMATION AND DAMAGE ISponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: C. M. Davies, Imperial College London, London, United

Kingdom; R. Dennis, Frazer-Nash Consultancy, Bristol, UnitedKingdom; Y. Takahashi, Central Research Institute of ElectricPower Industry, Yokosuka, Japan

Chair: R. Kulka, Frazer-Nash Consultancy Ltd., Dorking, UnitedKingdom

Co-Chair C. M. Davies, Imperial College London, London, UnitedKingdom

PVP2013-97819: CREEP RUPTURE STRENGTH EVALUATION WITHREGION SPLITTING BY HALF YIELDK. Kimura, National Institute for Materials Science, Tsukuba, Ibaraki, JapanPVP2013-98001: THE INFLUENCE OF INELASTIC DAMAGE ON TENSILEDEFORMATION AND CREEP CRACK GROWTH BEHAVIOUR OF TYPE 316HSTAINLESS STEELA. Mehmanparast, C. M. Davies, Imperial College London, London, UnitedKingdom; D. W. Dean, EDF Energy, Gloucester, Gloucestershire, UnitedKingdom; K. M. Nikbin, Imperial College London, London, United KingdomPVP2013-97319: CREEP DEFORMATION PARAMETERS AND CREEP LIFEOF GR.91F. Abe, National Institute for Materials Science, Tsukuba, JapanPVP2013-97808: EFFECT OF MATERIAL MICROSTRUCTURE ON CREEPDAMAGE FORMATION BEHAVIOR FOR NI-BASE DIRECTIONALLYSOLIDIFIED SUPERALLOYG. Ozeki, R. Sugiura, A. T. Yokobori Jr., Y. Nagumo, H. Takeuchi, T. Matsuzaki,Tohoku University, Sendai, JapanPVP2013-97969: STUDY OF THE EFFECT OF LONG-TERM THERMALAGING ON THE CREEP-RUPTURE PROPERTIES OF 18CR-9NI STEELA. Gulenko, B. Margolin, A. Buchatsky, A. Kashtanov, Central Research Instituteof Structure Material “Prometey,” Saint-Petersburg, RussiaSESSION 4.3G (DA-12-1)Thursday, July 18, 2:00 pm – 3:45, Level -1, Louis Armstrong C+DPROBABILISTIC METHODS IN DESIGN AND ANALYSIS 1Symposium of Safety, Reliability and Risk Assessment – Co-Sponsored byComputer Technology & Bolted Joints, Materials & Fabrication, OperationsApplications & Components, Design and Analysis, and Codes & StandardsTechnical CommitteesDeveloped by: D. Vlaicu, Ontario Power Generation, Pickering, CanadaChair: R. Wilson, Consultant, Orlando, FL, USACo-Chair D. Vlaicu, Ontario Power Generation, Pickering, CanadaPVP2013-97059: A METHODOLOGY FOR GENERATION OF BEST-ESTI-MATE PIPEWELD PROBABILITIES OF FAILURE AND LEAK RATES FORPRESSURISED WATER REACTOR PLANTJ. Wilson, E. Heaton, Rolls Royce Plc, Derby, United KingdomPVP2013-97631: DESIGN CURVE CONSTRUCTION BASED ON MONTECARLO SIMULATIONZ. Wei, L. Luo, B. Lin, D. Konson, Tenneco, Grass Lake, MI, USA; K. M. Nikbin,Imperial College London, London, United KingdomPVP2013-97804: APPLICATION OF THE BAYESIAN UPDATING TO THELOAD AND RESISTANCE FACTOR DESIGN (LRFD) METHODY. Nakasone, Tokyo University of Science, Katsushika-ku, Tokyo, JapanSESSION 4.3H (MF-3-3)Thursday, July 18, 2:00 pm – 3:45, Level 0, Pont De Sully A+BMATERIALS FOR HYDROGEN SERVICE IIIDeveloped by: M. P. H. Brongers, Det Norske Veritas (U.S.A) Inc., Dublin, USA;

A. Duncan, Savannah River National Laboratory, Aiken, SC,USA; C. San Marchi, Sandia National Laboratories, Livermore,CA, USA; Y. Tanaka, Nittetu Sumikin Technology, Futtu-city,Chiba-Pref., Japan; I. Garcia

Chair: M. P. H. Brongers, Det Norske Veritas (U.S.A) Inc., Dublin, USACo-Chair I. GarciaPVP2013-97455: MEASUREMENT OF FATIGUE CRACK GROWTH RATES

51

FOR SA372 GR. J STEEL IN 100 MPA HYDROGEN GAS FOLLOWINGARTICLE KD-10B. Somerday, C. San Marchi, Sandia National Laboratories, Livermore, CA,USA; K. Nibur, Hy-Performance Materials Testing, LLC., Bend, OR, USAPVP2013-97433: A NUMERICAL AND EXPERIMENTAL STUDY OF THE DISKPRESSURE TESTK. Ardon, Y. Charles, M. Gasperini, LSPM-CNRS, Villetaneuse, France; J.Furtado, Air Liquide, Les Loges-en-Josas, FrancePVP2013-97485: EFFECT OF CYCLE FREQUENCY ON FATIGUE CRACKPROPAGATION BEHAVIOR FOR STEELS IN HYDROGEN STORAGEW. Yoru, Japan Steel Works, Ltd., Tokyo, JapanPVP2013-97656: MECHANICAL PROPERTIES OF A NEW NITROGEN-STRENGTHENED STAINLESS STEEL WITH REDUCED AMOUNT OF NI ANDMO IN HIGH PRESSURE GASEOUS HYDROGENK. Matsumoto, H. Fujii, S. Ohmiya, Nippon Steel & Sumitomo Metal Corporation,Chiba, Japan; M. Hatano, Nippon Steel & Sumikin Stainless Steel Corporation,Yamaguchi Prefecture, JapanSESSION 4.3I (CS-11-3)Thursday, July 18, 2:00 pm – 3:45, Level 0, Pont De Arts ASTRUCTURAL INTEGRITY OF CHINESE PRESSURE EQUIPMENTDeveloped by: Z. Chen, Institute of Process Equipment, Zhejiang University,

Hangzhou, ChinaChair: Z. Chen, Institute of Process Equipment, Zhejiang University,

Hangzhou, ChinaCo-Chair F. Zhou, Zhejiang University, Hangzhou, ChinaPVP2013-97369: THE FURTHER DEVELOPMENT OF NATIONAL SAFETYASSESSMENT STANDARD FOR IN-SERVICE PRESSURE EQUIPMENTCONTAINING DEFECTSS. Shao, G. Jia, L. Sun, H. Wang, China Special Equipment Inspection andResearch Institute, Beijing, ChinaPVP2013-97602: STUDY ON STRUCTURAL INTEGRITY ANALYSIS OFTUBULAR REACTOR WITH CORROSION PITS IN LDPE PLANTJ. Zhao, Nanjing University of Technology, Nanjing, Jiangsu, China; C. Miao,Jiangsu Province Special Equipment Safety Supervision Inspection Institute,Nanjing, Jiangsu, China; J. Chen, X. Guan, BASF-YPC Company Limited,Nanjing, Jiangsu, ChinaPVP2013-97842: STUDY ON LEAKAGE DIFFUSION AND FORCE ANALYSISOF DOUBLE-LAYER STRUCTURE OF OIL STORAGE TANKL. Zhao, East China University of Science and Technology, Hangzhou, Zhejiang,China; F. Liu, Zhejiang Provincial Special Equipment Inspection and ResearchInstitute, Hangzhou, Zhejiang, China; S. Kong, East China University of Scienceand Technology, Hangzhou, Zhejiang, China; Z. Ling, Zhejiang University,Hangzhou, Zhejiang, China; L. Wang, Zhejiang Provincial Special EquipmentInspection and Research Institute, Hangzhou, Zhejiang, ChinaPVP2013-97891: STUDY ON PLASTIC COLLAPSE LOAD OF STEELELLIPTICAL HEADS UNDER INTERNAL PRESSUREL. Sun, G. Deng, J. Zhao, China Special Equipment Inspection and ResearchInstitute, Beijing, Beijing, ChinaPVP2013-97758: OPTIMIZATION ANALYSIS ON THE STRUCTUREPARAMETERS OF A 20×104 M3 ULTRA LARGE TANK FOR CRUDE OILSTORAGEW. Feng, Z. Chen, X. Shen, F. Zhou, H. Fan, Zhejiang University, Hangzhou,ChinaSESSION 4.3J (SE-8-3)Thursday, July 18, 2:00 pm – 3:45, Level 0, Pont De Arts BBASE ISOLATION AND STRUCTURAL CONTROL TECHNOLOGY IIIDeveloped by: O. Furuya, Tokyo City University, Tokyo, JapanChair: K. Hiramoto, Niigata University, Niigata, JapanCo-Chair C. Tsai, Feng Chia University, Taichung 407, TaiwanPVP2013-97283: SEISMIC HEALTH MONITORING OF CONCRETE SHEARWALL USING PIEZOCERAMIC-BASED SENSORSW.-I Liao, National Taipei University of Technology, Taipei, Taiwan; J.-F. Chai, T.-Y. Hsu, National Center for Research on Earthquake Engineering, Taipei, TaiwanPVP2013-97451: SEMI-ACTIVE CONTROL OF STRUCTURAL SYSTEMSAIMING TO APPROXIMATE THE PERFORMANCE OF THE TARGETED

ACTIVE CONTROL LAW: OUTPUT EMULATION APPROACHK. Hiramoto, Niigata University, Niigata, Japan; T. Matsuoka, Meiji University,Kawasaki, Kanagawa, Japan; K. Sunakoda, Sanwa Tekki Corporation,Utsunomiya, Tochigi, JapanPVP2013-97650: A STUDY ON CONTROLLABLE ASEISMIC DEVICE WITHINERTIA MASS AND MR FLUIDH. Sodeyama, K. Shibata, Y. Sato, Sanwa Tekki Corporation, Utsunomiya,Japan; H. Fujitani, Kobe University, Kobe, Japan; T. Tomizawa, Kozo KeikakuEngineering Inc., Tokyo, JapanPVP2013-97724: VALIDATION OF THE ACCURACY OF APPROXIMATION INA DESIGN FORMULA FOR AN AIR SPRING BY USING NUMERICALANALYSIST. Asami, Y. Yokota, M. Okura, T. Ise, I. Honda, University of Hyogo, Himeji,Japan; H. Sakamoto, Tokkyokiki Corporation, Amagasaki, Hyogo, JapanSESSION 4.3K (CS-10-3)Thursday, July 18, 2:00 pm – 3:45 pm, Level 0, Pont De Arts CDESIGN AND CONSTRUCTION OF FAST REACTOR IDeveloped by: S. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; K.

Onizawa, Japan Atomic Energy Agency, Tokai, Japan; Y. Li,Japan Nuclear Energy Safety Organization, Tokyo, Japan

Chair: N. Kasahara, The University of Tokyo, Tokyo, Bunkyo-ku, JapanCo-Chair N. Miura, Central Research Institute of Electric Power Indus,

Yokosuka, JapanPVP2013-98061: DEVELOPMENT OF 2012 EDITION OF JSME CODE FORDESIGN AND CONSTRUCTION OF FAST REACTORS (1) OVERVIEWT. Asayama, Japan Atomic Energy Agency, Ibaraki-ken, Japan; K. Dozaki, JapanAtomic Power Co, Tokyo, Japan; T. Otani, Mitsubishi Heavy Industries, Ltd.,Tokyo, Japan; T. Inatomi, Toshiba Corporation, Yokohama, Japan; M. Ando,Japan Atomic Energy Agency, Ibaraki, JapanPVP2013-97608: DEVELOPMENT OF 2012 EDITION OF JSME CODE FORDESIGN AND CONSTRUCTION OF FAST REACTORS (2)—DEVELOPMENTOF THE MATERIAL STRENGTH STANDARD OF 316FR STAINLESS STEELT. Onizawa, Y. Nagae, S. Takaya, T. Asayama, Japan Atomic Energy Agency,Ibaraki-ken, JapanPVP2013-97611: DEVELOPMENT OF 2012 EDITION OF JSME CODE FORDESIGN AND CONSTRUCTION OF FAST REACTORS (3)—DEVELOPMENTOF THE MATERIAL STRENGTH STANDARD OF MODIFIED 9CR-1MOSTEELT. Onizawa, Y. Nagae, S. Takaya, T. Asayama, Japan Atomic Energy Agency,Ibaraki-ken, JapanPVP2013-97609: DEVELOPMENT OF 2012 EDITION OF JSME CODE FORDESIGN AND CONSTRUCTION OF FAST REACTORS (4)—CREEP-FATIGUEEVALUATION METHOD FOR MODIFIED 9CR-1MO STEELS. Takaya, Y. Nagae, T. Asayama, Japan Atomic Energy Agency, Ibaraki-ken,JapanSESSION 4.3L (OAC-6-1)Thursday, July 18, 2:00 pm – 3:45, Level 2, St. MichelADVANCES IN SEALING TECHNOLOGYDeveloped by: A. Cheta, Shell Exploration and Production Company, Houston,

TX, USA; Y. Shoji, Shoji Technology Consulting, Musashino,Tokyo, Japan

Chair: R. Currie, Flexitallic, Cleckheaton, United KingdomCo-Chair G. Jung, Shell Global Solutions, Houston, TX, USAPVP2013-97050: INTRODUCTION TO THE CHANGE GASKETR. Currie, Flexitallic, Cleckheaton, United KingdomPVP2013-97119: DESIGN OF SUBSEA OIL AND GAS PIPELINE REPAIRCLAMPB. Zhao, CNPC Research Institute of Engineering Technology, Tianjin, TianjinTanggu, China; H. Zhu, China University of Petroleum-Beijing, Beijing, China; D.Tang, CNPC Research Institute of Engineering Technology, Tianjin, China; J.Zhang, China University of Petroleum-Beijing, Beijing, China; B. Long, CNPCResearch Institute of Engineering Technology, Tianjin, ChinaPVP2013-97301: IMPACT OF NON-UNIFORM TEMPERATURE ON FLANGELEAK TIGHTNESSG. Jung, Shell Global Solutions, Houston, TX, USA; M. Kim, Atkins, Houston, TX,

52

USA; E. Gage, Stress Engineering Services Inc., Houston, TX, USASESSION 4.3M (OAC-4-1)Thursday, July 18, 2:00 pm – 3:45, Level 2, St. Germain Des Pres A+BTOXIC SUBSTANCES: RADIOACTIVE MATERIALSDeveloped by: N. K. Gupta, Savannah River National Laboratory, Evans, GA,

USAChair: V. Baudanza, University of Pisa, Pisa, ItalyCo-Chair I. Delvallee-Nunio, IRSN, Fontenay-aux-Roses, FrancePVP2013-97015: PRACTICAL THERMAL EVALUATION METHODS FOR HACFIRE ANALYSIS IN TYPE B RADIAOACTIVE MATERIAL (RAM) PACKAGESN. K. Gupta, Savannah River National Laboratory, Evans, GA, USA; S. J.Hensel, G. Abramczyk, Savannah River National Laboratory, Aiken, SC, USAPVP2013-97478: FLAMMABILITY ANALYSIS FOR ACTINIDE OXIDESPACKAGED IN 9975 SHIPPING CONTAINERSJ. Laurinat, N. Askew, S. J. Hensel, Savannah River National Laboratory, Aiken,SC, USAPVP2013-97479: BENCHMARKING OF IMPROVED DPAC TRANSIENTDEFLAGRATION ANALYSIS CODEJ. Laurinat, S. J. Hensel, Savannah River National Laboratory, Aiken, SC, USAPVP2013-98107: DEVELOPMENT OF A TECHNICAL BASES DOCUMENT TOSUPPORT THE IAEA REGULATIONS FOR SAFE TRANSPORT OFRADIOACTIVE MATERIALC. Bajwa, International Atomic Energy Agency, Vienna, Austria; R. Pope,Safe/Secure Transport of Radioactive Material (S/STRAM), Waynesboro, PA,USASESSION 4.3O (MF-10-3)Thursday, July 18, 2:00 pm – 3:45, Level 3, Le Parc Montsouris BMECHANISTIC MODELLING OF MATERIALS—IIIDeveloped by: A. Horn, AMEC, Warrington, Cheshire, United KingdomChair: A. H. Sherry, University of Manchester, Manchester, United

KingdomCo-Chair A. Horn, AMEC, Warrington, Cheshire, United KingdomPVP2013-97183: CONSTRUCTING A VALIDATED DEFORMATIONMECHANISM MAP USING LOW TEMPERATURE CREEP STRAINACCOMMODATION PROCESSES FOR WASPALOY (A NICKEL-BASEDSUPERALLOY)M. Asadi, University of British Columbia, Vancouver, BC, Canada; D. Guillot,University of Ottawa, Ottawa, ON, Canada; A. Chamanfar, École de TechnologieSupérieure, Montreal, QC, Canada; A. Koul, Life Prediction Technologies Inc.,Ottawa, ON, Canada; M. Jahazi, École de Technologie Supérieure, Montreal,QC, Canada; A. Weck, University of Ottawa, Ottawa, ON, CanadaPVP2013-97248: CONSTITUTIVE MODELING OF HAYNES 230 FORANISOTHERMAL THERMO-MECHANICAL FATIGUE AND MULTIAXIALCREEP-RATCHETING RESPONSESR. Ahmed, P. R. Barrett, T. Hassan, North Carolina State University, Raleigh, NC,USAPVP2013-98130: FINITE ELEMENT DUCTILE CRACK GROWTHSIMULATIONS OF SPECIMENS UNDER COMBINED MECHANICAL ANDRESIDUAL STRESSESC.-Y. Oh, J.-H. Kim, Y. J. Kim, Korea University, Seoul, Korea (Republic); P.Budden, EDF Energy, Gloucester, United KingdomPVP2013-98066: MECHANISTIC STUDY OF FAC PROCESSES FOCUSEDON THE OXIDE LAYER PROPERTIESH. Abe, Y. Watanabe, Tohoku University, Sendai, Japan

no textBlock 4.4: Thursday, July 18 (4:00 pm – 5:45 pm)

no textSESSION 4.4A (MF-2-5)Thursday, July 18, 4:00 pm – 5:45 pm, Level -1, Ella Fitzgerald BAPPLICATION OF FRACTURE MECHANICS IN FAILURE ASSESSMENT—5Developed by: G. H. B. Donato, FEI University Center, Sao Paulo, BrazilChair: G. H. B. Donato, FEI University Center, Sao Paulo, BrazilCo-Chair S. Cravero, Tenaris, Campana, Argentina

PVP2013-98155: PROBABILISTIC STUDY OF SCC INITIATION STAGEBASED ON STATISTICAL ANALYSIS IN 316L AUSTENITIC STAINLESSSTEELR. Ihara, M. Mochizuki, S. Fujimoto, Osaka University, Suita, Osaka, JapanPVP2013-98000: MECHANICAL TESTING OF COMPONENT SIZE SPECI-MEN UNDER IMPACT CONDITIONSK. Müller, R. Scheidemann, J. Auster, Federal Institute for Materials Researchand Testing (BAM), Berlin, GermanyPVP2013-97953: STUDY ON VALIDITY OF STRESS INTENSITY FACTOR INCT SPECIMEN FOR MATERIALS WITH LOW YIELD STRESSM. Takanashi, Y. Itabashi, T. Hirano, IHI Corporation, Yokohama, JapanPVP2013-97612: STRUCTURAL INTEGRITY EVALUATION OF HIGHSTRENGTH ANCHOR BOLT FOR SUPPORTING STEAM GENERATOR ANDREACTOR COOLANT PUMP IN NUCLEAR POWER PLANTSE.-M. Lim, N.-S. Huh, Seoul National University of Science and Technology,Seoul, Korea (Republic); C. Oh, H. Shim, KEPCO E&C, Seongnam-si, Korea(Republic); H. Kim, KEPCO E&C, Yongin-si, Korea (Republic)SESSION 4.4C (DA-3-4)Thursday, July 18, 4:00 pm – 5:45 pm, Level -1, Miles Davis CFATIGUE TESTING AND IN SITU MEASUREMENTSDeveloped by: P. Gilles, S. Courtin, Areva NP, Paris, FranceChair: M. Breach, GE-Hitachi Nuclear Energy, Wilmington, NC, USACo-Chair J. Chen, University of Alberta, Edmonton, AB, CanadaPVP2013-97095: EXPERIMENTAL EVALUATION OF FATIGUE LIFE OFCOKE DRUM MATERIALS WITH WELD SECTIONSJ. Chen, University of Alberta, Edmonton, AB, Canada; T. Yamamoto, SumitomoHeavy Industries Process Equipment Co., Ltd., Saijo-city, Japan; Z. Xia,University of Alberta, Edmonton, AB, Canada; K. Esaki, Sumitomo HeavyIndustries Process Equipment Co., Ltd., Saijo-city, JapanPVP2013-97280: HIGH FREQUENCY STATISTICAL ENERGY ANALYSISAPPLIED TO FLUID FILLED PIPE SYSTEMSP. Van Beek, TNO, Delft, Netherlands; J. P. M. Smeulers, TNO Fluid Dynamics,Delft, NetherlandsPVP2013-97048: PREDICTION OF THE INNER TEMPERATURES IN A DUCTBASED ON OUTER THERMOCOUPLES MEASUREMENTSS. Gervais, EDF/SEPTEN, Villeubanne, France; A. Girard, EDF/R&D, Chatou,FrancePVP2013-97777: ESTIMATION OF STRESS RATIO FROM STRIATIONSTHREE-DIMENSIONAL GEOMETRYK. Yamagiwa, T. Sasaki, National Institute for Occupational Safety and Health,Japan, Tokyo, JapanSESSION 4.4E (MF-4-8)Thursday, July 18, 4:00 pm – 5:45 pm, Level -1, Miles Davis ARESIDUAL STRESS IN REPAIR WELDINGDeveloped by: F. W. Brust, Engineering Mechanics Corp of Columbus,

Columbus, OH, USAChair: M. Shazly, The British University in Egypt, Al-Shorouk City,

Cairo, EgyptCo-Chair F. Al-Badour, King Fahd University of Petroleum and Minerals,

Dhahran, Saudi ArabiaPVP2013-97234: 3D FINITE ELEMENT MODELING OF IN-SERVICE SLEEVEREPAIR WELDING OF GAS PIPELINESA. R. Alian, Cairo University, Giza, Egypt; M. Shazly, The British University inEgypt, Al-Shorouk City, Cairo, Egypt; M. M. Megahed, Cairo University, Giza,EgyptPVP2013-97473: EFFECTIVENESS OF WELD BUTTERING REPAIR OFEXTERNALLY LOADED PRESSURE VESSELS WITH CORROSIONDAMAGED. Swanek, C-FER Technologies, Edmonton, AB, Canada; J. R. MacKay,Defence R&D Canada - Atlantic, Dartmouth, NS, Canada; S. P. Farrell, DefenceR&D Canada - Atlantic, Halifax, NS, Canada; R. Link, Martec Limited, Halifax,NS, Canada; C. Timms, C-FER Technologies, Edmonton, AB, CanadaPVP2013-97516: THE INFLUENCE OF GEOMETRY ON RESIDUAL STRESSPROFILES AROUND SLOT-TYPE REPAIR WELDSJ. Walsh, A. F. Mark, H. Abdolvand, J. Francis, University of Manchester,

53

Manchester, United Kingdom; S. Bate, AMEC, Warrington, Merseyside, UnitedKingdom; B. Pellereau, Rolls-Royce Group, PLC, Derby, United Kingdom; M.Hofmann, FRM II, Garching, Germany; P. J. Withers, University of Manchester,Manchester, United KingdomPVP2013-97554: CREEP PROPERTY EVALUATION FOR STRESSMITIGATION SIMULATION IN POST WELD HEAT TREATMENTN. Yanagida, Hitachi, Ltd., Hitachi, Ibaraki, Japan; K. Saito, Hitachi-GE NuclearEnergy, Ltd., Ibaraki, JapanPVP2013-97762: EXPERIMENTAL INVESTIGATION OF FRICTION STIRSEAL WELDING OF TUBE-TUBESHEET JOINTSF. Al-Badour, N. Merah, A. Shuaib, A. Bazoune, King Fahd University ofPetroleum & Minerals, Dhahran, Saudi ArabiaSESSION 4.4F (MF-19-4)Thursday, July 18, 4:00 pm – 5:45 pm, Level -1, Louis Armstrong A+BCREEP DEFORMATION AND DAMAGE IISponsored by the Codes & Standards and Materials & FabricationTechnical CommitteesDeveloped by: R. Dennis, Frazer-Nash Consultancy, Bristol, United Kingdom;

Y. Takahashi, Central Research Institute of Electric PowerIndustry, Yokosuka, Japan; C. M. Davies, Imperial CollegeLondon, London, United Kingdom

Chair: H. Chen, University of Strathclyde, Glasgow, ScotlandCo-Chair R. Dennis, Frazer-Nash Consultancy, Bristol, United KingdomPVP2013-97486: EFFECT OF MULTI-AXIAL STRESS ON CREEP DAMAGEBEHAVIOR FOR NOTCHED SPECIMEN OF P92 STEELH. Shigeyama, R. Sugiura, A. T. Yokobori Jr., T. Matsuzaki, Tohoku University,Sendai, JapanPVP2013-97942: SIMULATING RESIDUAL STRESSES USING A MODIFIEDWEDGE-LOADED COMPACT TENSION SPECIMENP. Kapadia, H. Zhou, C. M. Davies, Imperial College London, London, UnitedKingdom; R. C. Wimpory, Helmholtz-Zentrum Berlin für Materialien und Energie,Berlin, Germany; K. M. Nikbin, Imperial College London, London, UnitedKingdomPVP2013-97902: SIMPLIFIED PREDICTION OF CREEP VOID DISTRIBUTIONIN HEAT-AFFECTED ZONE OF GRADE 122 STEEL CONSIDERINGMULTIAXIAL STRESS STATEE. Murakami, M. Hashimoto, S. Kikuhara, Babcock-Hitachi K.K., Kure,Hiroshima, JapanPVP2013-97769: PREDICTIONS OF CREEP CRACK INITIATION PERIODS INPRE-COMPRESSED 316H STAINLESS STEELC. M. Davies, Imperial College London, London, United Kingdom; K. Tarnowski,Imperial College London, London, United Kingdom; D. W. Dean, EDF Energy,Gloucester, Gloucestershire, United Kingdom; G. Webster, Imperial CollegeLondon, London, United KingdomPVP2013-97807: EXTRAPOLATION OF CREEP STRENGTH BY FRACTUREENERGY FOR 316FR STAINLESS STEEL AT 823KY. Nagae, T. Asayama, Japan Atomic Energy Agency, Ibaraki-ken, JapanSESSION 4.4G (DA-5-1)Thursday, July 18, 4:00 pm – 5:45 pm, Level -1, Louis Armstrong C+DSTRESS CLASSIFICATION & DESIGN BY ANALYSIS METHODOLOGIESDeveloped by: M. Y. A. Younan, American University in Cairo, New Cairo,

Egypt; Q. Ma, Walla Walla University, College Place, WA, USAChair: D. Mackenzie, University of Strathclyde, Glasgow, ScotlandCo-Chair H. Abdalla, American University In Cairo, Cairo, EgyptPVP2013-97075: ASME SECTION III STRESS ANALYSIS OF A HEATEXCHANGER TUBESHEET WITH A MISDRILLED HOLE AND IRREGULAROR THIN LIGAMENTSE. Gómez, R. Ruiz, ENSA, Maliaño/Cantabria, Spain; R. Wilson, Orlando, USAPVP2013-97076: TECHNICAL JUSTIFICATION SUPPORTING OPERATIONWITH A TUBE INSTALLED IN A MIS-DRILLED HOLE OF A STEAMGENERATOR TUBESHEETR. Ruiz, E. Gómez, ENSA, Maliaño/Cantabria, Spain; R. Wilson, Orlando, USAPVP2013-97255: STRESS CLASSIFICATION FOR TUBESHEET OF HEATEXCHANGER WITH SEMI-ELLIPSOIDAL HEADSN. Yoshimura, JGC Corporation, Yokohama, Japan; S. Kataoka, JGC

Corporation, Kanagawa, Japan; T. Sato, JGC Corporation, Yokohama, JapanPVP2013-97495: NON-DESTRUCTIVE MONITORING OF VARIATIONS OFRESIDUAL STRESSES IN STEEL WELDMENTS BY MAGNETICBARKHAUSEN NOISE METHODC. H. Gur, I. Cam, G. Erian, C. Batigun, Middle East Technical University, Ankara,TurkeyPVP2013-97948: THE ROLE OF COMPUTATIONAL WELD MECHANICS INTHE WELD REPAIR OF CANADA’S NRU NUCLEAR REACTORJ. Goldak, Carleton University, Ottawa, ON, Canada; M. Yetisir, Aecl Research,Chalk River, ON, Canada; R. Pistor, Liburdi Engrg, Dundas, ON, CanadaSESSION 4.4H (MF-21-1)Thursday, July 18, 4:00 pm – 5:45 pm, Level 0, Pont De Sully A+BMF 21.1 ADVANCED MANUFACTURING AND MATERIALS TECHNOLOGYFOR NEW NUCLEAR BUILDDeveloped by: B. Burdett, Rolls-Royce, Derby, United KingdomChair: B. Burdett, Rolls-Royce, Derby, United KingdomCo-Chair B. BorradailePVP2013-97093: HOT ISOSTATIC PRESSING OF STAINLESS STEEL ANDNICKEL-BASE POWDERS FOR PWR COMPONENTS- MATERIALS &MANUFACTURING BENEFITS UPDATEB. Burdett, H. R. Dugdale, Rolls-Royce, Derby, United KingdomPVP2013-97193: OPTIMIZATION OF RESIDUAL STRESSES INDUCED BYMULTIPLE LASER SHOCK PROCESSINGX. Wei, J. Zhou, X. Ling, Nanjing University of Technology, Nanjing, Jiangsu,ChinaPVP2013-97253: EXISTENCE FORM OF BORON IN DISSIMILAR WELDMETALS OF LOW ALLOY STEEL WITH BORON BEARING HIGHCHROMIUM STEELY. Honma, Japan Steel Works Ltd., Hokkaido, Japan; R. Kayano, Japan SteelWorks Ltd., Muroran, Japan; Mikihiro Sakata, K. Yamashita, Kobe Steel Ltd.,Kanagawa, JapanPVP2013-97601: DEVELOPMENT OF PIPE WALL THINNING EVALUATIONMETHOD AND PREDICTION TOOLK. Yoneda, R. Morita, Central Research Institute of Electric Power Industry,Komae-shi, Tokyo, Japan; K. Fujiwara, Central Research Institute of ElectricPower Industry, Yokosuka, Kanagawa, Japan; F. Inada, Central ResearchInstitute of Electric Power Industry, Tokyo, JapanSESSION 4.4I (CS-11-4)Thursday, July 18, 4:00 pm – 5:45 pm, Level 0, Pont De Arts AEXAMPLE OF ENGINEERING FAILURE ANALYSIS IN CHINADeveloped by: X. Chen, Hefei General Machinery Research Institute, Hefei,

Anhui, ChinaChair: X. Chen, Hefei General Machinery Research Institute, Hefei,

Anhui, ChinaCo-Chair S. Zhong, Zhejiang University, Hangzhou, Zhejiang, ChinaPVP2013-97118: DEVELOPMENT OF REGULATION ON ACCIDENTMANAGEMENT AND STATISTICS ANALYSIS ON ACCIDENT FOR CHINASPECIAL EQUIPMENTJ. Yang, J. Zheng, W. Luo, X. Li, Guangdong Institute of Special EquipmentInspection and Research, Guangzhou, Guangdong, ChinaPVP2013-97320: FAILURE AND PREVENTION OF PRESSURE VESSELSDUE TO INSTABILITY OF PROCESS SYSTEMC. Xuedong, J. Zhu, Z. Fan, Z. Ai, Hefei General Machinery Research Institute,Hefei, Anhui Province, ChinaPVP2013-97541: TIME-HISTORY ANALYSIS OF A SUPER-LARGE STORAGETANK UNDER SEISMIC EXCITATIONF. Bu, C. Qian, Beijing University of Chemical Technology, Beijing, ChinaPVP2013-97556: FAILURE ANALYSIS OF EXPANSION BELLOWS SERVINGIN STEAM PIPE NETWORKY. Huang, X. Y. Tang, H. Yu, Y. Qian, R. Wu, Shanghai Institute of SpecialEquipment Inspection and Technical Research, Shanghai, ChinaPVP2013-97388: DEVELOPMENT OF EQUIPMENT INTEGRITY MANAGE-MENT SYSTEM BASED ON PREDICTIVE MAINTENANCEG. Jia, H. Wang, X. Li, J. Zhong, G. Xie, w. Wang, China Special EquipmentInspection and Research Institute, Beijing, China

54

SESSION 4.4K (CS-10-4)Thursday, July 18, 4:00 pm – 5:45 pm, Level 0, Pont De Arts CDESIGN AND CONSTRUCTION OF FAST REACTOR IIDeveloped by: K. Onizawa, Japan Atomic Energy Agency, Tokai, Japan; S. S.

Asada, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; Y. Li,Japan Nuclear Energy Safety Organization, Tokyo, Japan

Chair: S. S. Asada, Mitsubishi Heavy Industries, Ltd., Kobe, JapanCo-Chair F. Iwamatsu, Hitachi, Ltd., Ibaraki, JapanPVP2013-97806: DEVELOPMENT OF 2012 EDITION OF JSME CODE FORDESIGN AND CONSTRUCTION OF FAST REACTORS (5)—CREEP-FATIGUEEVALUATION METHOD FOR 316FR STAINLESS STEELY. Nagae, S. Takaya, T. Asayama, Japan Atomic Energy Agency, Ibaraki-ken,JapanPVP2013-97803: DEVELOPMENT OF 2012 EDITION OF JSME CODE FORDESIGN AND CONSTRUCTION OF FAST REACTORS (6)—DESIGN MARGINASSESSMENT FOR THE NEW MATERIALS TO THE RULESM. Ando, Japan Atomic Energy Agency, Ibaraki, Japan; S. Watanabe, K. Kikuchi,Mitsubishi Heavy Industries, Ltd., Kobe, Hyogo, Japan; T. Otani, MitsubishiHeavy Industries, Ltd., Tokyo, Japan; K. Satoh, Mitsubishi FBR Systems, Inc.,Shibuya-ku, Tokyo, Japan; K. Tsukimori, T. Asayama, Japan Atomic EnergyAgency, Ibaraki-ken, JapanPVP2013-97154: DEVELOPMENT OF LIMIT STATE DESIGN FOR FASTREACTOR BY SYSTEM BASED CODED. Watanabe, Mitsubishi Heavy Industries, Ltd., Kobe, Japan; Y. Chuman,Mitsubishi Heavy Industries, Ltd., Nagasaki, Japan; T. Asayama, S. Takaya,Japan Atomic Energy Agency, Ibaraki-ken, Japan; H. Machida, TEPCO SystemsCorporation, Eitai Kotoku, Japan; Y. Kamishima, Mitsubishi FBR systems, Inc.,Tokyo, JapanPVP2013-97858: STUDY ON MINIMUM WALL THICKNESS REQUIREMENTOF REACTOR VESSEL OF FAST REACTOR FOR SEISMIC BUCKLING BYSYSTEM BASED CODES. Takaya, Japan Atomic Energy Agency, Ibaraki, Japan; D. Watanabe,Mitsubishi Heavy Industries, Ltd., Kobe, Japan; S. Yokoi, Y. Kamishima,

Mitsubishi FBR Systems, Inc., Tokyo, Japan; K. Kurisaka, T. Asayama, JapanAtomic Energy Agency, Ibaraki-ken, JapanSESSION 4.4O (MF-14-1)Thursday, July 18, 4:00 pm – 5:45 pm, Level 3, Le Parc Montsouris BLEAK-BEFORE-BREAK (1)Developed by: J. K. Sharples, AMEC Power and Process Europe, Warrington,

United Kingdom; B. Bezensek, Shell U.K Limited, Aberdeen,Aberdeen, United Kingdom; G. Wilkowski, A. Chakraborty

Chair: J. K. Sharples, AMEC Power and Process Europe, Warrington,United Kingdom

Co-Chair A. Toft, Amec, Warrington, Cheshire, United KingdomPVP2013-97092: DEVELOPMENT OF NON-IDEALIZED SURFACE TOTHROUGH-WALL CRACK TRANSITION MODELD.-J. Shim, R. Kurth, Engineering Mechanics Corporation of Columbus,Columbus, OH, USA; D. L. Rudland, US Nuclear Regulatory Commission,Rockville, MD, USAPVP2013-97893: ESTIMATES OF PLASTIC J-INTEGRAL AND CRACKOPENING DISPLACEMENT CONSIDERING TRANSITION CRACK FROMSURFACE TO THROUGH-WALL CRACK IN CYLINDERD.-H. Cho, H. B. Surh, Sungkyunkwan University, Suwon, Korea (Republic); N.-S. Huh, Seoul National University of Science and Technology, Seoul, Korea(Republic); J. B. Choi, Sungkyunkwan University, Kyungi-do, Korea (Republic);D.-J. Shim, Engineering Mechanics Corp of Columbus, Columbus, OH, USA; Y.H. Choi, Korea Institute of Nuclear Safety, Daejeon, Korea (Republic)PVP2013-98008: CRACK OPENING DISPLACEMENT MODEL FORTHROUGHWALL AXIAL CRACKS IN CYLINDERSM. Benson, NRC, Rockville, MD, USA; B. A. Young, Battelle Memorial Institute,Columbus, OH, USA; D.-J. Shim, F. W. Brust, Engineering Mechanics Corp ofColumbus, Columbus, OH, USAPVP2013-98171: REGULATORY PERSPECTIVE ON PROBABILISTICASSESSMENTS FOR STRUCTURAL INTEGRITY ANALYSIS OF CANDUPRESSURE BOUNDARY COMPONENTS (Presentation Only)B. Carroll, J. Jin, Canadian Nuc Safety Commission, Ottawa, ON, Canada

55

CHAIR/CO-CHAIR, DEVELOPERS, PLENARY SPEAKERS, TUTORIAL SPEAKERSNAME TITLE SESSION NAME TITLE SESSIONAbdalla, H. Co-Ch 4.4GAdibiasl, R. Ch, Co-Ch, Dev 1.1B, 1.1C. 2.2B, 3.1B, 3.1K. 4.2GAggarwal, M. Dev 3.1AAinsworth, R. Dev 1.4G, 2.2F, 2.3FAl-Badour, F. Co-Ch 4.4EAntalffy, L. Co-Ch 3.1EAntunes, J. Co-Ch 1.1N, 3.2NAsada, S. S. Ch, Dev 1.3C, 1.4C, 2.1C, 2.2C, 4.1K, 4.2K, 4.3K,

4.4KAsami, T. Co-Ch 1.3JAvery, A. Ch, Co-Ch, Dev 1.1G, 1.3G, 3.1HBaliga, R. Ch, Co-Ch 1.1F, 1.3F, 2.1IBaranyi, L. Ch, Dev 1.4N, 4.1NBarnes, R. Co-Ch, Dev, Ps 1.2BLRM, 2.4FBasavaraju, C. Ch, Co-Ch, Dev 2.1G. 2.2G, 2.3G, 2.4GBaudanza, V. Ch 4.3MBausman, A. Co-Ch 2.2LBecht IV, C. Ts 0.3QBees, W. J. Ts 1.1QBelfroid, S. Ch, Co-Ch 2.3N, 4.2NBenaouicha, M. Dev 3.2DBergholz, S. Dev 3.1C, 3.2CBezdikian, G. Ch, Co-Ch, Dev 1.1K, 1.3K, 1.4KBezensek, B. Ch, Ts 1.3Q, 1.4Q, 2.1M, 3.2H, 4.4OBianchini, D. Co-Ch 2.1KBorradaile, B. Co-Ch 4.4HBouchard, P. J. Ch, Co-Ch, Dev 1.4O, 2.2EBouzid, H. A. Dev 1.1LBrar, G. Co-Ch 4.2DBreach, M. Ch, Co-Ch, Dev 4.4C, 2.1C, 2.2CBrongers, M. P. H. Ch, Dev 4.1H, 4.2H, 4.3HBrown, W. Ch, Co-Ch, Dev, Ts 2.3Q, 2.4Q, 3.1L, 3.2L, 4.1L,

4.2LBrumovsky, M. Ch, Co-Ch, Dev 2.3L, 2.4LBrust, F. W. Ch, Co-Ch, Dev, Ts 1.1E, 2.1E, 2.2E, 3.1Q, 3.2Q,

4.4EBrzuszkiewicz, J. Ts 0.2QBudden, P. Ts, Co-Ch 1.3Q, 1.4Q, 2.3FBurdett, B. Ch, Dev 4.4HBursi, O. S. Co-Ch 2.2JCarte, M. Ch 2.1H, 2.3HChakraborty, A. Dev 4.4OChaudouet, A. Ps 1.2BLRMChen, H. Ch 4.1G, 4.4FChen, J. Co-Ch 4.4CChen, X. Ch, Dev 4.4IChen, Z. Ch, Co-Ch, Dev 4.1I, 4.3ICheta, A. Ts, Dev 0.3Q, 4.1J, 4.1M, 4.2M, 4.3LCipolla, R. Co-Ch, Dev, Ts 1.3M, 1.3Q, 1.4QClayton, A. Ch, Dev 3.1ICohn, M. Ch, Co-Ch, Dev 3.1M, 3.2MCory Jr., J. F. Ch, Dev 2.1S, 2.2S, 2.3S, 2.4SCourtin, S. Ch, Dev 4.2C, 4.4CCrane, R. Ch, Dev 1.3MCravero, S. Co-Ch 3.2O, 4.4ACurrie, R. Ch 4.3LDavies, C. M. Ch, Co-Ch, Dev 2.2F, 2.3F, 4.1F, 4.2F, 4.3F, 4.4FDe Baglion, L. Ch 1.4CDean, D. W. Co-Ch 2.2FDelvallee-Nunio, I. Co-Ch 4.3MDemoss, D. Co-Ch 2.2KDennis, R. Ch, Dev, Co-Ch, Dev, TS 1.4E, 3.1Q, 3.2Q, 4.1F,

4.2F, 4.3F, 4.4FDewees, D. J. Ch 3.2B

Dlouhy, I. Dev 4.1E, 4.2EDonato, G. H. B. Ch, Dev 3.2A, 4.4ADozaki, K. Dev 1.4MDuan, X. Ch 3.1KDuncan, A. Dev 4.1H, 4.2H, 4.3HDweib, A. Ch, Co-Ch, Dev 1.1F, 1.3F, 2.1G, 2.3G, 2.4GDymacek, P. Co-Ch, Dev 4.1E, 4.2EEren, S. E. Co-Ch 1.4G, 2.3C, 3.2KEtienne, S. Co-Ch, Dev 1.4N, 2.2NEzekoye, I. Ch, Co-Ch, Dev, Ts 0.3Q, 2.3L, 2.4LFaidy, C. Co-Ch, Ts 1.3Q, 1.4Q, 3.2EFaria, H. Ch, Dev 2.3A, 2.4AFarley, M. Ts 0.2QFujita, K. Ch, Dev 1.1J, 1.3J, 3.2NFukuoka, T. Co-Ch 2.1LFuruya, O. Ch, Co-Ch, Dev 2.4J, 4.2J, 4.3JGarcia, I. Co-Ch, Dev 4.1H, 4.2H, 4.3HGeng, J. Dev 2.4IGeraets, L. H. Ts 0.3QGiacomelli, E. Co-Ch, Dev 1.3HGiannopapa, C. Ch, Co-Ch 2.3D, 2.4DGilles, P. Ch, Co-Ch, Dev 1.1E, 1.4O, 4.1C, 4.4CGilman, T. Co-Ch 1.3CGlass, S. W. Co-Ch 2.1HGoyder, H. Ch, Co-Ch 1.3N, 2.4NGresnigt, A. M. Ch 2.3JGriesbach, T. Ch, Dev 2.4HGross, D. Co-Ch, Dev 3.2IGuan, W. Ch 2.3KGupta, N. K. Dev 4.3MGutkovsky, A. Co-Ch 1.4IHafner, R. S. Co-Ch, Dev 1.1B, 1.2BLRM, 1.3B, 1.4B, 2.1B, 2.2B,

2.3B, 2.4BHall, J. Dev 3.2DHari, Y. Ch, Co-Ch, Dev 4.1D, 4.2DHassan, M. Ch, Dev 2.2N, 3.1NHeinz, B. Co-Ch, Dev 3.1C, 3.2CHenry, J. Co-Ch 1.4FHill, M. R. Co-Ch, Ts 2.4E, 3.1Q, 3.2QHiramoto, K. Ch 4.3JHoang, P. Ch, Dev 2.1M, 4.1KHoffmeister, B. Co-Ch 2.3JHojo, K. Ch, Co-Ch, Dev 1.4M, 2.4HHolloway, G. Co-Ch 3.1NHorn, A. Ch, Co-Ch, Dev 3.2A, 4.1O, 4.2O, 4.3OHosseinzadeh, F. Ch, Dev 1.3OHuang, C.-C. Ch 2.2KHyde, T. Ch, Dev 4.2EInaba, K. Dev 2.3D, 2.4DIsamu, N. Dev 4.2EIshihara, K. Co-Ch 2.3NIto, T. Dev 3.1JIwamatsu, F. Co-Ch 3.1D, 4.4KIwasaki, A. Co-Ch 1.1JIyama, H. Co-Ch, Dev 2.3D, 2.4DIyer, S. Ch, Co-Ch, Dev 3.1F, 3.2FJames, P. Ch, Co-Ch, Dev 2.1O, 2.2O, 4.2OJanzen, V. Co-Ch 2.4BJaske, C. E. Ch, Co-Ch, Dev 1.1S, 1.2S, 1.3S, 1.4S, 3.1M, 3.2MJia, G. Ch, Dev 4.2IJo, J. C. Ch, Co-Ch, Dev 1.1D, 1.3D, 3.2DJones, S. Co-Ch, Dev 2.4IJung, G. Ch 4.1MJung, G. Co-Ch 4.3L

56

Kalyanam, S. Dev 1.3A, 2.1A, 2.2AKamaya, M. Ch 1.3CKaneko, S. Ch 1.4NKang, H. S. Ch 2.1NKang, K.-S. Ch 1.4KKaramanos, S. A. Ch, Co-Ch, Dev 1.4J, 2.2J, 2.3JKasahara, N. Ch, Dev 2.2F, 4.3KKatsuyama, J. Co-Ch 2.3EKeim, E. Ch, Dev 1.4E, 2.1E, 2.1O, 2.2OKerr, M. Co-Ch, Dev 1.1O, 1.3O, 1.4OKikuchi, T. Ch 2.1KKim, Y. J. Ch 2.3F, 4.3AKobayashi, H. Ch 3.1JKobayashi, T. Co-Ch 1.4LKrishnamurthy, S. Ch, Co-Ch 1.1I, 1.3I, 1.4I, 2.1I, 3.1L, 3.2LKrishnaswamy, P. Ch, Co-Ch 1.3A, 2.1AKulka, R. Ch, Co-Ch 4.1O, 4.2O, 4.3FKwon, D. Dev 4.2EKwon, Y. W. Dev 1.1B, 1.3B, 1.4B, 2.1B, 2.2B, 2.3B, 2.4BLam, P.-S. Dev 3.2A, 4.2ALeen, S. Ch, Co-Ch, Dev 2.1B, 2.3B, 4.2E, 4.3ELejeune, H. Co-Ch 1.3LLeslie, P. O Co-Ch, Dev 3.1ILevine, H. Ch, Dev 2.4ILi, B. Ch, Co-Ch, Dev 2.1G, 2.2G, 2.3G, 2.4GLi, X. Co-Ch, Dev 4.2ILi, Y. Co-Ch, Dev 2.1M, 4.1K, 4.2K, 4.3K, 4.4KLigon, T. Ch, Dev 3.2ILongatte, E. Co-Ch 3.2DMa, Q. Dev 4.4GMackenzie, D. Ch 3.2G, 4.4GMaekawa, A. Ch, Co-Ch, Dev 3.1J, 3.2JMaleki, S. Co-Ch 2.4CMarques, A. T. Co-Ch 2.3A, 2.4AMartin, C. S. Ch, Co-Ch, Dev 1.4D, 2.1DMartin, M. Ch, Dev 3.1G, 4.1D, 4.2DMatsuoka, T. Co-Ch 2.4JMcGuffie, S. Dev 2.1I, 3.1G, 3.2G, 4.1GMcKie, N. Co-Ch, Dev 1.1HMehta, H. Dev 1.3C, 1.4C, 2.1C, 2.2CMertiny, P. Ch, Dev 1.4A, 2.3AMinagawa, K. Co-Ch, Dev 3.1J, 3.2JMiura, N. Co-Ch 4.3KMiyazaki, K. Dev 3.1D, 3.2HMochizuki, M. Dev 2.3C, 2.3E, 2.4CMohany, A. Ch, Dev 2.3N, 3.1N, 4.2NMoinereau, D. Ch, Dev 1.1I, 1.3I, 1.4I, 2.1O, 2.2OMoody, F. J. Ch, Co-Ch, Dev 1.4D, 2.1DMorinaka, R. Co-Ch 3.2BMourad, A. H. I. Ch 4.2AMoussou, P. Ch, Co-Ch, Dev 1.3N, 2.4N, 4.2NMullin, A. Ts 0.2QMurakami, E. Co-Ch 4.1FMureithi, N. Co-Ch, Dev 1.1N, 1.3N, 2.1N, 2.2N, 2.3N, 3.2N, 4.1NNakamura, T. Ch, Dev 3.1N, 4.1NNanstad, R. Ch, Co-Ch, Dev 2.3O, 2.4ONassar, S. Ch, Dev, Ts 2.1L, 2.2L, 2.3Q, 2.4QNicak, T. Co-Ch, Dev 2.1O, 2.2ONikbin, K. M. Ch, Dev 2.2F, 2.3C, 2.3F, 3.2KNitzel, M. E. Ch, Dev 1.2BLRMNoble, R. Ch, Co-Ch, Dev 3.1L, 3.2L, 4.1CO’Donoghue, P. E. Co-Ch 4.2EO’Dowd, N. Ch, Co-Ch 1.3B, 1.4BOkada, H. Co-Ch 4.1K

Onizawa, K. Dev 4.1K, 4.2K, 4.3K, 4.4KPapadakis, G. Ch, Dev 2.3D, 2.4DPellereau, B. Ch, Dev 1.3EPenso, J. Co-Ch 4.1JPeters, D. T. Ch, Dev 1.1QPetrunich, P. Co-Ch 4.1L, 4.2LPolasik, S. Co-Ch, Dev 3.1OPorter, M. Dev 1.1F, 1.3F, 2.1IQian, H. Ch, Co-Ch 1.3B, 1.4BRana, M. Ch, Co-Ch, Dev 1.1Q, 1.4F, 2.1F, 3.1E, 3.2ERebak, R. B. Ch 1.1OReece-Barkell, H. Co-Ch 4.2FReese, S. H. Co-Ch 3.1CReich, A. Dev 2.1K, 2.2KReinhardt, W. Ch, Co-Ch, Dev 1.1C, 3.1B, 4.2GRen, W. Ch, Co-Ch, Dev 2.3O, 2.4ORicciardi, G. Co-Ch 4.1NRobin, V. Ch, Dev 2.4E, 3.2BRodery, C. Ch, Co-Ch, Dev 1.1G, 1.3G, 2.2M, 2.3M, 2.4M, 3.1HRothenhöfer, H. Ch, Co-Ch 1.4K, 3.2CRudland, D. L. Ch 2.1ERudland, D. L. Ch, Dev, Ts 1.1E, 2.4C, 2.4E, 3.1Q, 3.2QRudolph, J. Ch, Co-Ch, Dev 1.1C, 3.1C, 3.2C, 4.3CRuggles-Wrenn, M. B. Co-Ch, Dev 1.4ARush, P. Ch, Co-Ch, Dev 1.3A, 2.1A, 2.2ASaid, T. Co-Ch 4.2CSan Marchi, C. Co-Ch, Dev 4.1H, 4.2H, 4.3HSawa, T. Ch, Co-Ch 1.1L, 2.1LScarth, D. A. Ch, Dev 1.3M, 4.1ASchaaf, M. Ch, Dev 1.3LSegall, A. Ch, Co-Ch, Dev 3.1F, 3.2FSeipp, T. G. Ch, Co-Ch, Dev 1.1G, 1.3G, 2.2M, 2.3M, 2.4MSham, T.-L. Ch, Dev 2.4FShannon, B. E. Co-Ch 4.1MSharples, J. K. Ch, Co-Ch, Dev 1.4G, 3.1D, 3.2H, 4.2A, 4.4OShazly, M. Ch 4.4ESherfey, S. Ch 1.4J, 2.1JSherry, A. H. Ch 4.3OShi, J. Ch, Dev 4.1IShim, D.-J. Co-Ch, Dev 1.1O, 1.3A, 2.1A, 2.2AShintani, A. Co-Ch 2.1N, 3.2JShoji, Y. Ch, Co-Ch, Dev 1.1B, 2.3B, 4.1M, 4.2M, 4.3LSimpson, K. Ch, Dev 1.3H, 1.4HSinclair, C. Ts 0.2QSisan, A. Ch, Dev 3.1OSlagis, G. Dev 1.4J, 2.1JSmith, C. Ch, Dev 3.1A, 1.1HSmith, M. C. Co-Ch 1.3ESommerville, D. Dev 2.4ISperandio, M. Dev 1.4GSpicer, M. A Co-Ch 2.2ASpringer, W. T. Dev 2.1H, 2.3HStakenborghs, R. Co-Ch, Ts 0.1Q, 2.2H, 2.3HStang, D. L. Ch, Co-Ch, Dev 3.1A, 1.1HStevens, G. Dev 1.3C, 1.4C, 2.1C, 2.2CStrnadel, B. Ch, Dev 4.1E, 4.2E, 4.3ETaagepera, J. Co-Ch 1.1I 1.3ITada, N. Ch, Dev 2.2HTahara, T. Ch, Dev, Ts 0.3Q, 4.1J, 4.2MTakahashi, K. Co-Ch 2.1B 2.2BTakahashi, Y. Dev 4.1F, 4.2F, 4.3F 4.4FTanaka, Y. Dev 4.1H, 4.2H, 4.3HTaniguchi, T. Ch, Co-Ch, Dev 2.1J, 2.4B, 3.2JThompson, J. Ts 0.2Q

CHAIR/CO-CHAIR, DEVELOPERS, PLENARY SPEAKERS, TUTORIAL SPEAKERSNAME TITLE SESSION NAME TITLE SESSION

57

Tijsseling, A. Ch, Dev 1.1D, 1.3DTodd, J. Dev 1.1S, 1.2S, 1.3S, 1.4SToft, A. Co-Ch 4.4OTruman, C. E. Ch 2.3ETsai, C. Ch, Co-Ch 4.2J, 4.3JTurnbow, M. Ts 0.2QVan Beek, P. Co-Ch 4.3CVeiga, J. Ch, Dev 1.1L, 2.2LVlaicu, D. Co-Ch, Dev 3.1G, 3.2G, 4.1G, 4.3GWalsh, J. Co-Ch 2.2EWang, J. Co-Ch, Dev 4.3AWang, M. Dev 3.1KWasylyk, A. Ch, Dev 2.1FWaterland, J. Ch, Dev 1.4LWeaver, D. S. Dev 2.1N, 3.2NWei, Z. Ch, Dev 2.3C, 2.4C, 3.2K

Wilkowski, G. Dev 4.4OWilson, R. Ch 4.3GWink, R. Co-Ch, Dev 1.4HXu, S. Co-Ch 4.1AXuedong, C. Dev 2.3KYonekawa, R. Co-Ch, Dev 1.4MYounan, M. Y. A. Ch, Dev 0.1Q, 0.2Q, 0.3Q, 1.3Q, 1.4Q, 2.3Q, 2.4Q,

3.1Q, 3.2Q, 4.4GYoung, G. Ch, Co-Ch, Dev 1.1K, 1.3K, 1.4KZhao, M. Dev 1.1G, 1.3G, 2.3M, 3.1HZheng, J. Ch, Co-Ch, Dev 1.4C, 2.1C, 4.1IZhong, S. Co-Ch 4.4IZhou, F. Co-Ch 4.3IZhu, J. Co-Ch 2.3KZhu, X.-K. Ch, Dev 3.2OZiada, S. R. Ch, Dev 1.1N, 2.4NZobeiry, N. Dev 2.1G, 2.3G

CHAIR/CO-CHAIR, DEVELOPERS, PLENARY SPEAKERS, TUTORIAL SPEAKERSNAME TITLE SESSION NAME TITLE SESSION

58

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSIONAbbiati, G. 2.3JAbboud, A. 2.1LAbdalla, H. 3.2GAbdelsalam, O. R. 1.1GAbdolvand, H 4.4EAbe, F. 1.3O, 4.3FAbe, H. 4.3OAbid, M. 3.2LAbramczyk, G. 4.3MAbu-Muharib, A. 4.1OAdali, S. 1.4AAdibiasl, R. 3.1B, 3.2GAdluri, S. M. R. 2.4MAhmadi, S. 3.2DAhmed, O. 2.4IAhmed, R. 4.3OAhn, T. M. 2.3CAi, Z. 2.3L, 4.4IAida, K. 3.1JAida, S. 1.4JAinsworth, R. 2.3FAird, C. 1.3EAl Mithin, A. W. 1.4KAl Robai, M. 4.1JAl-Badour, F. 4.4EAl-Bermani, S. 1.1HAlexandre, B. 4.2JAlian, A. R. 4.4EAllenspach, A. 1.3HAl-Obaidi, K. A. 2.3MAl-Shaiji, M. 1.4KAl-Sudairy, J. 4.1JAltarawneh, J. 4.2AAmaro, R. 4.1HAmir, N. 2.1HAmmerman, D. 4.2GAn, B. 4.1HAndo, K. 2.1MAndo, M. 4.3K, 4.4KAnis, A. 4.1CAnnicchiarico, C. 1.4AAntaki, G. 1.3MAntalffy, L. 3.1E, 4.2MAntonissen, J. 2.3EAntunes, J. 3.1NAraque, E. 1.1GArdon, K. 4.3HArguelles, J. 1.1FArrieta-Ruiz, A. 1.3KArthurs, D. 1.1N, 1.3N, 2.4NAsada, S. 1.3C, 1.4C, 2.1C, 4.1KAsadi, M. 4.3OAsadkarami, A. 3.2GAsakura, K. 1.4NAsami, T. 1.1J, 4.3JAsayama, T. 4.3K, 4.4F, 4.4KAskew, N. 4.3MAsserin, O. 2.3EAstolfi, J.-A. 3.2DAumuller, J. 3.1EAvery, A. 3.2FAyers, L. 2.2HAzizian, R. 3.1NBabbini, A. 1.4A, 2.1I

Bader, B. 2.1HBaek, U. B. 4.2HBagagli, R. 1.3HBaier, H. 1.4ABajwa, C. 4.3MBalduzzi, F. 2.1IBalestreri, F. 2.1K, 3.1NBanchet, J. 2.1HBannister, A. C. 4.2OBao, S. 2.3KBarannyk, O. 1.3N, 2.3DBaranyi, L. 1.4NBarbier, F. 2.3ABarborak, D. 2.3OBardel, D. 1.1EBardia, K. 3.2FBargellini R. 4.1ABarnes, R. 1.4FBarrett, P. R. 4.3OBarrett, R. A. 2.4OBarrio, R. 1.4DBarsoum, I. 3.1BBarsoum, Z. 2.1BBarth, F. 3.1ABarthelmes, J. 2.2OBasavaraju, C. 2.2GBaschuk, J. 2.1DBass, B. R. 4.1OBate, S. 1.1E, 1.3E, 4.4EBates, P. 1.1HBatigun, C. 4.4GBatra, R. 4.2CBatura, A. 2.3GBaudanza, V. 2.1KBausman, A. 1.1LBazoune, A. 4.4EBecht 5th, C. 1.3M, 2.4MBecker, S. 1.1BBeguin, C. 2.2NBeier, H. T. 4.1CBelanger, P. 4.1JBelfroid, S. 1.3N, 2.3N, 2.4N, 4.2NBelley, B. 2.1IBelloir, P. 1.3ABenabdallah, S. 2.2LBenaouicha, M. 3.2DBendiksen, E. 2.4NBenson, M. 2.3F, 4.4OBerenshtein, V. 1.1HBergant, A. 2.1DBergheau, J.-M. 1.4IBergholz, S. 3.1CBerland, J. 3.2NBernasconi, G. 2.3HBerro, H. 3.2NBertoncini, F. 2.3HBettini, B. 1.3HBezensek, B. 2.1MBhadeshia, H. K. D. H. 2.2B, 2.4BBhattacharya, A. 2.3GBianchi, R. 1.3ABianchini, D. 2.1KBiglari, F. 1.1O, 2.4OBitter, N. 3.2I

Bjorkman, G. 4.2GBlachut, J. 3.1GBlanco, E. 1.4DBlasset, S. 2.2OBlat-Yrieix, M. 1.4GBlom, F. J. 2.1CBlouin, A. 1.4IBoccaccio, E. 2.1NBocher, P. 2.2HBogdan, A. 1.3IBolduc, M. 1.3N, 2.3N, 2.4NBonelli, A. 2.3JBonne, D. 1.4GBonora, N. 1.1I, 2.2B, 2.2M,

3.1G, 4.1FBooker, J. D. 3.2KBorodii, M. 2.3GBorsoi, L. 3.1NBouchard, P. J. 1.1E, 1.3E, 1.4E,

2.2EBoulay, A. 4.1ABourgeois, M. 2.1OBouzid, H. 2.2LBowie, G. 2.1IBradai, S. 4.2CBrar, G. 4.2DBrau, E. 2.3HBreach, M. 4.3CBrezina, M. 4.1EBrocheny, P. 1.4DBrosse, A. 3.2BBrown, R. G. 2.4M, 3.1LBrown, W. 2.1G, 3.1L, 3.2L, 4.2LBruck, P. M. 1.4DBrumek, J. 4.3EBrumovsky, M. 1.4IBrust, F. 1.1O, 2.2E, 2.3F, 4.4OBu, F. 4.4IBuchatsky, A. 4.1F, 4.3FBudano, S. 2.3HBudden, P. 4.3OBukowski, J. 3.2KBulat, W. 1.1JBunda, Z. 1.4OBunsell, A. 3.1ABurdett, B. 4.4HBurke, M. A. 2.1NBurlutskiy, E. 3.2OBursi, O. S. 2.3JCadot, O. 3.2NCai, W. 4.2ICalatroni, A. 3.1GCalonne, O. 3.2BCam, I. 4.4GCanfield, S. 3.1JCao, H. 2.3CCao, J. 3.2ECao, M. 3.1GCaperaa, C. 2.1HCapitani, R. 1.4ACaplan, A. 3.1ICaple, P. 3.2ECarcasci, C. 1.3HCarlucci, A. 2.2M

Carroll, B. 4.4OCarroll, L. 1.3B, 2.4FCarter, R. 3.1FCarucci, V. 3.1ECasanova, E. 1.1F, 1.1GCatelli, R. 4.2FChabane, S. 2.3BChai, J.-F. 4.3JChaise, T. 1.1E, 3.2BChamanfar, A. 4.3OChampliaud, H. 1.4L, 3.2BChandiramani, D. 3.1EChang, K. 4.3AChang, S.-Y. 1.3JChang, Y. 1.4BChant, E. 2.4MChao, Y.-J. 3.2AChapelle, D. 2.4BChapuliot, S. 1.1I, 1.4I, 2.1O, 2.2OCharkas, H. 3.1GCharles, Y. 4.3HCharreton, C. 2.2NCharrouf, M. 1.1NChaudhary, A. 1.3KChen, D. 3.1OChen, G. 2.4GChen, Ha. 3.1C, 3.2G, 4.2FChen, Hu 2.1E, 2.3FChen, Jia. 4.3IChen, Jie 4.4CChen, Jin 2.1GChen, P. 1.3GChen, Sh. 1.3GChen, Su. 2.1GChen, T. 4.2FChen, X. 2.3OChen, Zha. 4.1DChen, Zhip. 1.3G, 3.2J, 4.3IChen, Zhiw. 1.4M, 4.1IChen, Zho. 3.2AChesworth, S. 2.3KChevalier, M. 2.2FChinthapalli, A. 3.2CCHitose, H. 2.3KCho, D.-H. 4.1D, 4.4OChockie, A. 2.4HChoi, G. 3.1FChoi, J. B. 4.1D, 4.4OChoi, J. 1.1JChoi, M.-J. 2.1EChoi, S. 1.3DChou, H.-W. 2.1KChou, H.-Y. 3.1AChoudhury, B. 2.1GChuang, C.-C. 3.1BChuman, Y. 4.4KChung, I. H. 4.2HChung, J.-W. 2.1EChung, M. S. 1.1DChung, S. 2.2AChurier, H. 1.3KCicero, S. 4.2OCipolla, R. 1.3MClayton, A. 3.1I, 3.2I

59

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSIONCochran, K. 4.1OCofie, N. 2.4HCohn, M. 3.2MCooreman, S. 2.3ECoppock, E. 1.3LCornah, B. A. 1.4HCourtin, S. 1.3C, 1.3E, 1.4E,

4.1C, 4.2CCouvant, T. 2.3CCravero, S. 3.1OCrépin, J. 2.3CCristea, M. 4.2FCrooker, P. 2.4ECrouzet, F. 2.3N, 4.2NCudmore, C. 4.1NCuervo, J. 4.2OCui, J. 3.2ACurrie, R. 4.3LD’Aria, D. 2.3Hd’Udekem, N. 1.3ADai, Q. 2.3BDaly, M. 4.2ADate, S. 3.1FDaude, F. 2.3N, 4.2NDavenport, L. 2.1IDavey, K. 2.1BDavies, C. M. 1.1O, 2.4B, 2.4L,

4.2F, 4.3F, 4.4FDavies, P. 1.1HDe Baets, P. 1.1BDe Baglion, L. 1.3Cde Haan - de Wilde, F. H. E. 2.1Cde la Burgade, F. 1.4GDe Ridder, J. 2.1NDe Waele, W. 1.1B, 4.2ODean, D. W 1.3O, 2.2F, 4.3F, 4.4FDear, J. 2.4LDedhia, D. 2.4HDedov, A. 4.2EDegroote, J. 2.1NDel Giudice, S. 2.3HDelaune, X. 3.1NDelvallee-Nunio, I. 2.1KDemofonti, G. 2.2JDemol, T. 1.1KDemoss, D. 2.1KDeng, G. 4.3IDennis, R. 1.1EDenys, R. 4.2ODepradeux, L. 2.3E, 2.4EDeschanels, H. 1.1IDevilliers, C. 2.3A, 3.1ADewees, D. J. 1.3I, 2.4M, 3.1LDey, R. 3.1ADi, Y. 2.1DDiamanti, K. 2.2J, 2.3JDichiaro, S. 4.1FDiez, N. G. 2.4N, 4.2NDionigi, F. 2.3HDivaret, L. 3.2NDo, K. S. 1.1D, .3DDo, S. 2.1E, .1ODoaré, O. 3.2NDobes, F. 4.1E

Dodds Jr., R. H. 1.3IDohi, K. 4.2KDoi, H. 4.1KDolatshah, A. 2.1J, 2.4J, 2.4LDonato, G. H. B. 4.2A, 4.3ADong, J. 1.4KDong, P. 4.2CDong, Q. 3.1I, 3.2IDozaki, K. 1.4M, 4.3KDozaki, T. 4.2FDrenth, L. 2.1CDrexler, E. 4.1HDuan, X. 3.1KDubiez-Le Goff, S. 2.4FDuffey, T. 3.1IDugdale, H. R. 4.4HDuhamel, C. 2.3CDunham, R. 2.2MDweib, A. 2.2GDymacek, P. 4.1EDzierwa, P. 2.2FEcker, R. 3.1JEcker, W. 1.4OEdel, M. 2.4IEhara, K. 1.4MEilers, D. 2.3GEl-Bagory, T. A. 2.1AEl-Domiaty, A. 4.2AEllinghaus, K. 3.2KElliott, Novak S. J. 2.1NElsayed, M. 2.3NEmslie, J. 2.2CEnderlein, M. 1.3EEpremian, G. 2.4MEren, S. E. 1.4GErian, G. 4.4GErickson, M. A. 4.1OErnst, H. 3.1OEsaki, K. 4.4CEsposito, L. 4.1FEsselman, T. C. 1.4DEtienne, S. 2.2NEvon, K. 3.1CEzekoye, I. 2.3LFaal-Amiri, A. 1.3FFagerlund, A. C. 2.3GFaidy, C. 2.1C, 3.2EFakhary, M. R. 1.1GFan, F. 4.3IFan, H. 1.3GFan, Y. 2.1HFan, Z. 4.4IFandeur, O. 2.3EFang, X. 2.3KFang, Z. 3.2JFaria, H. 2.3A, 2.4AFarragher, T. P. 1.3OFarrell, R. S. 2.3LFarrell, S. P. 4.4EFedorova, V. 2.4CFeldmann, M. 2.2J, 2.3JFeng, W. 4.3IFeng, Zhe. 1.4L, 3.2BFeng, Zhi. 2.4E

Ferino, J. 2.2JFerracci, M. 3.2FFerrara, G. 2.1IFerrarese, G. 2.3DFicquet, X. 1.4EFigueiredo, J. 2.3AFilippini, M. 4.2FFinneran, S. 2.3G, 3.2MFischer, T. 2.4GFissolo, A. 4.2CFletcher, A. 2.1IFlueggen, R. 1.3GFolgarait, P. 3.1GForasassi, G. 2.1KFord, M. 2.2OForest, L. 2.3EForte, T. P. 2.2EFrancis, J. 1.1E, 4.4EFrançois, B. 2.1FFridlund, L. 1.1HFrimodt, C. 2.4NFrith, R. 3.1G, 4.1GFujii, H. 4.3HFujimoto, S. 4.4AFujimura, N. 2.3BFujino, T. 1.4MFujioka, T. 2.4FFujishiro, T. 2.2KFujita, K. 2.1NFujita, S. 1.3J, 2.4B, 3.1J, 4.2JFujita, Y. 2.2NFujitani, H. 4.3JFujiwara, K. 4.4HFukuda, R. 4.2HFukui, T. 1.1JFukuoka, T. 2.1L, 2.2L, 4.2GFukuta, Y. 1.3CFunai, M. 4.2FFurtado, J. 4.3HFuruya, O. 2.4JFusi, A. 1.3HGaetani, L. 3.2FGage, E. 4.3LGalle, T. 1.1BGallegillo, M. 3.2EGanharul, G. K. Q. 4.2AGänser, H.-P. 4.2EGao, Z. 2.1K, 2.3KGarcía, T. 4.2OGardin, C. 4.2CGaric, G. 2.4GGarnier, J. 1.1EGarrido, E. 1.1GGasperini, M. 4.3HGavriljuk, V. 4.1HGay, N. 1.3KGehrlicher, S. 4.1GGenette, P. 1.3CGeng, J. 2.4IGeng, L. 2.3EGentile, D. 1.1I, 3.1GGerber, A. 4.1NGervais, S. 4.4CGiacomelli, E. 1.3H

Gianetto, J. 3.1OGiannopapa, C. 2.4DGilkey, M. 3.1MGill, C. M. 1.1E, 2.3EGill, P. 2.1BGilles, P. 1.3E, 2.2O, 3.2A, 3.2BGillis, J. 1.3C, 2.1IGilman, T. 1.3C, 2.1C, 3.1C, 3.2CGirard, A. 4.4CGiunta, G. 2.3HGiurgiutiu, V. 2.2HGlass, W. 2.3HGloanec, A.-L. 4.1CGoble, W. 3.2KGoj, Anne 2.4IGoldak, J. 4.4GGolden, B. 2.2B, 4.1OGolliard, J. 1.3N, 2.4N, 4.2NGómez, E. 4.4GGong, Jiang. 3.1HGong, Jianm. 2.1E, 2.3E, 2.3FGonzalez, J. 2.1AGonzalez, M. 1.3I, 2.1AGoodfellow, A. 3.2EGooroochurn, Y. 2.3EGorash, Y. 4.2FGosselin, S. R 3.1M, 3.2MGoto, Y. 1.3JGourdin, C. 4.2CGoyder, H. 2.3NGradle, R. J. 2.3LGresnigt, A. M. 2.2J, 2.3JGreveling, M. 2.1HGriesbach, T. 2.4HGrisel, J. 1.3AGrisolia, O. 2.2FGross, D. 3.1IGross, R. 3.2KGu, Yan 3.1I, 3.2IGuan, K. 2.2LGuan, W. 1.4K, 2.1H, 2.3LGuan, X. 4.3IGuarnieri, A. M. 2.3HGuedes, R. M. 2.4AGuillot, D. 4.3OGulenko, A. 4.1F, 4.3FGuo, W. 1.3AGupta, N. K. 4.3MGur, C. H. 4.4GGurdal R. 4.3CGuse, G. 2.3HGuster, C. 1.4O, 4.2EGutkovsky, A. 3.1HGuzman-Leong, C. 3.2MHadley, I. 1.4GHaeri, N. 1.4HHagglund, F. 2.2AHagiwara, S. 2.2NHagiwara, T. 4.1KHall, B. 1.3KHallin, L. 3.1GHallouin, B. 2.1GHamadiche, M. 1.3DHamakawa, H. 1.4N

60

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSIONHambleton, A. 1.1HHamdi, H. 3.2BHamdouni, A. 4.1NHammad, F. 4.2MHamouda, O. 1.1DHan, J.-J. 1.3B, 1.3O, 4.3AHan, S. 4.2IHan, T. 4.2AHannan, A. S. 1.4KHannink, M. H. C. 2.1CHao, X. 4.2FHara, K. 3.2NHarada, K. 4.1NHarbi, A. 4.1JHardin, T. 1.3K, 2.2MHariri, S. 1.1BHarlow, D. G. 3.2KHaroldsen, B. 3.1I, 3.2IHarris, D. O. 2.4HHarris, J. 3.1FHarris, S. 3.2KHarrison, H. 4.3CHase, D. 1.4MHasegawa, Kunih. 1.4MHasegawa, Kunio 2.1M, 3.1D, 4.1KHashimoto, M. 4.4FHassaballa, M. 2.4NHassan, M. 1.3N, 3.1NHassan, T. 1.3B, 3.1F, 4.3OHatano, M. 4.3HHayashi, S. 3.2JHe, X. 2.3MHe, Y. 3.2AHeaton, E. 4.3GHein, H. 2.2OHeinz, B. 3.1CHeldt, J. 2.3OHenry, J. 1.4FHensel, S. J. 4.3MHerms, E. 3.1NHertelé, S. 4.2OHerter, K.-H. 1.1C, 1.4C, 1.4G, 2.2CHicks, T. G. 2.3OHiga, K. 2.3DHiga, O. 2.3DHiga, Y. 2.3DHiguchi, M. 2.1CHijazi, I. 3.1KHill, M. R. 1.4EHinz, G. 1.1FHioe, Y. 2.1AHirai, J. 2.2NHiramoto, K. 4.3JHirano, A. 1.4CHirano, T. 4.2K, 4.4AHirasawa, T. 4.1KHirata, H. 4.2HHiratsuka, M. 1.3L, 2.2LHiremagalur, J. 1.3CHirota, K. 2.2NHirota, T. 4.1D, 4.2E, 4.2KHirschberg, A. 2.3N, 4.2NHisadomi, K. 4.1NHoang, P. 2.1M

Hoehn, M. 1.3C, 3.2CHoffmann, M. 1.1CHoffmeister, B. 2.2J, 2.3JHojo, K. 2.4E, 2.4H, 4.1G, 4.2D,

4.3CHolloway, G. 4.1NHölzl, R. 1.3GHonda, I. 4.3JHong, J. K. 2.2EHongo, H. 1.3OHonma, Y. 4.4HHooper, P. 2.4LHoribe, T. 2.4M, 4.2HHormozi, R. 2.4OHorn, A. 4.2OHorne, G. 2.3BHoshika, T. 4.1JHosseinzadeh, F. 1.4E, 2.4BHou, D. 2.1AHou, Q. 2.1DHowell, R. M. 2.1NHsieh, J.-S. 1.4DHsu, T.-Y. 4.3JHua, L. 2.2KHua, Z. L. 4.1IHuang, C.-C. 2.1K, 2.4CHuang, C.-L. 1.3JHuang, K.-R. 2.1KHuang, Y. 4.4IHübel, H. 4.2DHübner, P. 1.3EHughes, L. 4.2HHugill, P. 2.1IHuh, N.-S. 4.2A, 4.4A, 4.4OHumphrey, S. 4.2MHurrell, P. 1.1E, 2.3EHwang, I. 2.2HHwang, S. S. 3.2EIannitti, G. 1.1I, 2.2MIgi, S. 3.2BIhara, R. 4.1A, 4.4AIijima, T. 4.1HImamura, K. 4.2AInaba, K. 2.4DInada, F. 4.4HInatomi, T. 4.3KIoka, S. 4.3CIse, T. 1.1J, 4.3JIshigaki, H. 1.3JIsono, H. 3.2NItabashi, Y. 4.4AItatani, M. 1.4CIto, N. 1.4MIto, T. 3.1J, 3.2NItoi, K. 1.3L, 2.2LItouga, H. 4.1HItow, M. 4.2DIwamatsu, F. 1.3M, 3.1DIwasaki, A. 1.3J, 2.2NIyengar, R. 2.3FIzard, J.-P. 1.1KIzuchi, H. 1.3FIzumi, S. 2.3BJacquemoud, C. 2.2O

Jahazi, M. 2.2H, 4.3OJames, P. 2.2O, 4.1OJansson, L. 4.1GJappy, A. 3.2GJardin, C. 1.4MJaske, C. E. 3.2M, 3.2O, 4.2MJeon, J.-Y. 4.1EJeon, S.-W. 4.2EJessup, W. 2.2GJetter, R. I. 2.4FJia, G. 3.2J, 4.3I, 4.4IJiang, J. 4.2IJiang, P. 2.3KJiang, W. 3.1OJiang, Y. 2.3FJin, H. K. 2.4GJin, J. 4.4OJin, S.-M. 2.4OJin, T. 3.1HJin, X.S. 3.2AJivkov, A. 2.2O, 4.1OJo, J. C. 1.1D, 1.3DJoannes, S. 3.1AJoly, P. 1.3KJones, J. W. 1.1JJose, V. 1.4KJoseph, J. 4.1JJouan, B. 3.1CJun, J. 4.2IJung, G. 4.3LJung, H. C. 2.3LJung, Y.-G. 1.1DKabganian, R. 3.2FKai, S. 1.4JKaida, T. 1.4J, 4.1MKaiktsis, L. 1.4NKalnins, A. 1.1CKalyanam, S. 1.4O, 2.1AKamaya, M. 1.4C, 2.4HKamijukkoku, M. 2.4DKamishima, Y. 4.4KKanasaki, H. 2.1CKaneko, N. 1.4JKaneko, S. 1.1NKanezaki, T. 4.2HKang, H. S. 3.2NKang, K. 1.1KKanno, A. 1.4MKanno, T. 1.4LKapadia, P. 1.3E, 4.4FKarabaki, E. 2.2CKaramanos, S. A. 2.1B, 2.2J, 2.3JKarjalainen-Roikonen, P. 2.2OKarri, S. 2.3DKasahara, N. 2.1DKashtanov, A. 4.1F, 4.3FKatakura, M. 2.4JKataoka, S. 4.4GKato, K. 4.1NKato, T. 3.1FKatsuyama, J. 2.2E, 3.1M, 4.1A,

4.2KKavanagh, N. 1.3LKawabayashi, H. 2.1L

Kawaguchi, S. 2.1AKawahara, A. 2.4EKawamura, K. 3.1JKawamura, T. 3.1JKawazoe, H. 1.4MKawazu, S. 2.4BKayano, R. 4.1H, 4.2M, 4.4HKazem S. 2.4LKeim, E. 2.1O, 2.2OKeisuke, S. 4.1JKeller, J. 1.4DKeller, M. 2.4AKepple, A. 1.1NKerkhof, K. 1.1FKhan, F. 3.1BKhan, Y. M. 3.2LKhurshid, M. 2.1BKikuchi, K. 3.1F, 4.4KKikuchi, M. 3.1D, 3.2HKikuchi, T. 2.1L, 2.2K, 4.2MKikuhara, S. 4.4FKim, D. Soo 2.1JKim, D.-J. 3.2EKim, D.-Soon 3.2FKim, H. G. 2.4G, 3.2FKim, H. P. 3.2EKim, H. 4.4AKim, I. Y. 2.1JKim, J. M. 4.3EKim, J. So. 3.2EKim, J. Su. 3.1DKim, J. 4.2EKim, J.-Hyo. 2.1EKim, J.-Hyu. 4.3A, 4.3OKim, J.-Y. 2.1EKim, M. 4.3LKim, M.-J. 3.2EKim, N. H. 3.1D, 4.1E, 4.2FKim, S.-C. 4.1DKim, Sa.-H. 1.3OKim, Se. H. 1.4BKim, Y. H. 2.2GKim, Y. S. 2.2GKim, Y.-B. 4.1DKim, Y.-C. 2.1EKim, Ye J. 2.2HKim, Yu. J. 1.3B, 1.3O, 2.3F,

3.1D, 4.1E, 4.2F, 4.3A, 4.3OKimura, K. 4.3FKimura, R. 1.4MKingston, E. 1.4E, 2.3EKinoshita, K. 3.1MKinugasa, K. 4.1KKirkpatrick, K. 3.1EKishimoto, K. 2.4DKitahara, T. 2.4GKitamura, M. 4.1HKiwata, T. 1.4NKizawa, M. 1.4MKlarner, J. 2.4GKleiman, J. 1.4OKlevtsov, I. 4.2EKloos, R. 3.1MKlucke, D. 1.3C, 3.2C

61

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSIONKnowles, D. 2.3FKobayashi, K. 2.2F, 3.2F, 4.3EKobayashi, N. 3.2JKobayashi, T. 1.1L, 1.3L, 1.4L,

2.2L, 4.1L, 4.2LKobayashi, Y. 1.4MKoch, F. 1.3EKoenig, G. 3.1CKoide, Y. 1.3JKojima, I. 4.1MKojima, M. 4.2FKondo, K. 1.1L, 1.3LKong, L. 2.1DKong, S. 4.3IKono, T. 1.4NKono, Y. 1.4MKonosu, S. 2.4M, 4.2HKonson, D. 3.2K, 4.3GKopp, P. 1.1CKoul, A. 4.3OKoussios, S. 2.3AKowal, J. 2.4BKoya, H. 4.1KKozlov, V. 1.4IKozluk, M. 3.1KKrautschneider, R. 4.1DKrishnaswamy, P. 2.1AKruk, S. 2.1LKubischta, K. 2.2MKubo, S. 4.3CKubota, T. 1.1NKudryavtsev, Y. 1.4E, 1.4OKulka, R. 1.1EKumagai, T. 3.1MKumar, A. 2.3JKumar, S. 1.4KKuna, M. 1.3EKupca, L. 4.1EKurihara, T. 2.2KKurisaka, K. 4.4KKurosawa, R. 1.1L, 1.4LKurth, R. 4.4OKuwaki, K. 2.1LKwon, D. 4.2ELacombe, R. 2.3N, 4.2NLafon, P. 2.3N, 4.2NLafreniere, P. 2.3KLai, W.-J. 4.1ALaird, S. 4.1GLam, P.-S. 3.2ALamagnere, P. 2.4FLandis, B. 2.4ILang, E. 4.1CLang, H. 4.2DLaskin, I. 1.3GLasseux, D. 2.1GLauerova, D. 3.2KLauria, D. 4.1HLaurinat, J. 4.3MLe Delliou, P. 1.1I, 4.2CLe Dreff-Kerwin, P. 2.4OLe Roux, J.-C. 4.2CLe, M. 2.3ELebarbé, T. 1.4G, 2.4F

Le-Bec, P. 1.4MLee, B. 4.3ELee, C.-M. 4.2MLee, Dar. 1.3MLee, Dav. 3.2OLee, H. M. 4.2HLee, H.-S. 3.1DLee, J. H. 2.1JLee, K. 4.2ELee, K.-H. 3.2NLee, S.-M. 4.1DLee, S.-Y. 4.1ELee, T.-H. 1.3DLee, Y. K. 1.1DLeen, S. 1.3O, 2.4OLefrancois, A. 1.3CLei, Y. 2.1K, 4.1ALeitch, B. 2.1DLejeail, Y. 2.4FLejeune, H. 4.1LLeonard, F. 4.2ALevente, T. 2.1OLevine, H. 2.4ILevy, C. 2.2MLewis, J. S. 1.4HLi, D. 2.2B, 4.1OLi, H. 4.1ILi, J. 3.2BLi, Q. 2.2KLi, T. 2.4FLi, W. 4.2ILi, Xi. 3.2J, 4.1I, 4.4ILi, Xu. 3.2H, 4.4ILi, Yi. 2.1M, 3.1D, 3.1M, 4.1KLI, Yue. 2.1KLi, Yul. 3.2HLi, Z. Y. 4.1ILi, Z. 2.3KLiang, B. 2.2KLiang, H. 4.2ILiao, W.-I 4.3JLiberge, E. 4.1NLidonnici, F. 1.1CLigon, T. 3.1ILili, Q. 4.2ILim, E.-M. 4.4ALin, B. 3.2K, 4.3GLin, L. 3.1ELindsey, M. S. 2.1HLing, X. 4.4HLing, Z. 2.3F, 4.3ILink, R. 4.4ELissenden, C. J. 3.1FLiu, C. 2.1G2.1GLiu, F. 2.3F, 4.3ILiu, R.-F. 2.1K, 2.4CLiu, S. 4.2JLiu, Y. 4.2ILiu, Z. 1.3ALo Frano, R. 2.1KLondon, T. 1.4GLong, B. 4.3LLongatte, E. 3.2DLu, K. 1.1I

Lu, S. 2.1ALu, Y. 2.3LLucci, A. 2.2J, 2.3HLucey, A. D. 2.1NLukes, R. 1.4OLuo, Lij. 2.3KLuo, Lim. 2.3C, 4.3GLuo, W. 3.2H, 4.4ILuo, Xian. 1.3ALuo, Xiao. 2.2KMa, H. 2.2KMa, K. 2.2LMa, L. 1.4BMa, Q. 2.2MMa, X. 1.4MMabuchi, Y. 1.1N, 4.2KMacejko, B. R. 3.1LMachado, R. 2.1AMachida, H. 2.3K, 4.4KMacKay, J. R. 4.4EMackenzie, D. 3.2GMadrazo, V. 4.2OMaekawa, A. 2.1J, 2.4EMaggi, C. 1.3HMahlke, J. 1.1C, 4.1GMahmoud, Y. K. 2.4BMaier, B. 1.4O, 4.2EMaier, C. 3.2OMair, D. 2.2G, 3.1AMalavasi, S. 2.3D, 2.4DMaleci, R. 2.1IMaleki, S. 4.1F, 4.1FMalin, M. 2.4DMally, T. 2.4AMalouines, P. 2.1FManfrone, F. 1.3HManke, A. 3.1CMann III, J. A. 2.3GManoly, K. 2.2GManuel, R. 1.4HMargolin, B. 2.4C, 4.1F, 4.3FMarie, S. 1.1I, 1.4I, 2.1O, 2.2O,

3.2EMark, A. F. 4.4EMarques, A. T. 1.4G, 2.3A, 2.4AMarquis, G. 2.1BMartin, C. S. 1.4DMartin, M. 3.2AMartinez, M. 1.3IMasaki, K. 2.2E, 4.2KMasia, A. 3.2FMasuda, A. 2.1JMathew, J. 1.1EMathias, L. L. S. 1.4BMathieu, L. 3.2BMathon, C. 1.3KMatsubara, M. 1.3BMatsuda, A. 3.1M, 4.2A, 4.2F, 4.3AMatsuda, K. 4.1NMatsukawa, Y. 2.2HMatsumoto, K. 4.3HMatsuo, K. 2.1MMatsuoka, T. 2.4J, 4.3JMatsuura, S. 2.1M

Matsuzaki, T. 4.4FMayinger, W. 2.2CMcCarthy, J. 1.4LMcCluskey, R. J. A. 1.4EMcCracken, S. 2.3OMcGhee, J. 1.1FMcGuffie, S. 2.1IMcKenzie, F. 4.1OMcKie, N. 1.1HMcVinnie, Gr. 2.4GMeehan, P. 3.1GMeertens, D. J. P. 2.3NMegahed, M. M. 4.4EMehmanparast, A. 4.1F, 4.2F, 4.3FMehta, H. 4.3CMeister, E. 1.3KMentl, V. 1.4OMerah, N. 2.3M, 4.4EMertiny, P. 1.4AMeshii, T. 1.1I, 4.1GMessa, G. 2.3D, 2.4DMesser, B. 1.1LMetais, T. 1.3CMiao, Ch. 4.3IMiao, Cu. 1.4BMiles, L. 3.2EMiller, G. 3.1EMilligan, J. 2.1HMinagawa, K. 1.3J, 2.4B, 3.1J, 4.2JMinorikawa, G. 1.3FMiura, N. 2.1M, 4.1KMiyajima, Y. 3.1DMiyashita, T. 2.4MMiyata, H. 1.3MMiyazaki, K. 1.3M, 3.1DMizutani, Y. 1.1OMoat, R. J. 1.1EMochizuki, M. 2.4E, 4.1A, 4.4AMohany, A. 1.3NMoinereau, D. 2.2OMolitoris, D. 4.2GMolki, A. 3.1BMöller, M. 1.4D, 3.1GMonteiro, G. 1.3LMontgomery, O. 2.3FMoody, F. J. 1.3D, 1.3FMoore, J. 1.1KMoreira, F. 4.3AMori, Ha. 4.1KMori, Hi. 4.1HMori, M. 1.4LMoriizumi, M. 1.4JMorikage, Y. 3.2BMorita, H. 1.3J, 2.2NMorita, R. 4.2N, 4.4HMorra, M. M. 2.1EMorris, A. 2.4LMotriuk, R. W. 1.3NMould Jr, J. 2.4IMourad, A. H. I. 4.2AMourgue, P. 3.2AMüller, K. 4.4AMunson, D. 2.2AMurakami, E. 4.4F

62

Murakami, N. 1.4MMurakawa, H. 2.4EMuransky, O. 1.1E, 1.3EMureithi, N. 2.2N, 3.1N, 3.2N, 4.1NMurphy, M. 2.2GNagae, Y. 4.3K, 4.4F, 4.4KNagai, M. 4.1KNagata, S. 1.1L, 1.4J, 2.2KNagumo, Y. 4.3FNahm, S. H. 4.2HNakagawa, C. 3.1J, 3.2NNakagawa, M. 1.4BNakamura, I. 1.4J, 2.1MNakamura, J. 4.2HNakamura, K. 2.2FNakamura, Takao 1.1B, 1.4CNakamura, Takas. 1.1C, 2.3BNakamura, To. 2.2NNakashima, K. 4.2KNakashima, T. 1.1JNakasone, Y. 4.3GNakiboglu, G. 2.3N, 4.2NNanstad, R. 2.3O, 4.2ENarayanan, A. 2.4BNarazaki, C. 4.2DNash, D. 3.2LNassar, S. 2.1LNasuno, H. 2.2ANaudin, C. 3.2CNaveed, N. 2.4BNawandar, S. 3.1ENayebi, A. 4.1CNebu, A. 1.4LNedelec, M. 2.2ONeely, C. C. 3.2LNekomoto, Y. 1.3JNelias, D. 1.1E, 3.2BNelson, J. 3.1GNibur, K. 4.3HNicak, T. 2.1ONickell, R. 1.1JNiclaeys, C. 1.4INiffenegger, M. 4.1DNikbin, K. M. 1.1O, 1.3O, 2.3C,

2.4O, 3.2K, 4.1F, 4.2C, 4.2F, 4.3F, 4.3G, 4.4F

Nishida, E. 1.4NNishida, K. 4.2KNishiguchi, M. 1.3FNishikawa, H. 4.2KNishikawa, T. 2.2KNishimatsu, N. 3.1JNishimoto, K. 4.1HNishiura, K. 1.3L, 2.2LNishiyama, Y. 4.2KNoban, M. 3.1BNoble, R. 1.4G, 3.2L, 4.1LNoboru, H. 4.2HNoh, S. H. 4.3ENomura, M. 2.1L, 2.2LNomura, Y. 1.3CNotohardjono, B. 3.1JNukaya, S. 1.1CO’Donoghue, P. E. 2.4O

O’Dowd, N. 1.3O, 2.2B, 3.2O, 4.1OO’Regan, P. 2.3KObermeier, F. 2.2OObeydi, M. 1.1GOchi, M. 4.3COgasawara, K. 2.4MOgawa, N. 2.4E, 4.1DOgawa, Take. 4.2HOgawa, Taku. 4.2KOgayu, Y. 4.1JOgiwara, H. 4.1HOguma, H. 1.1C, 2.3BOh, C. 4.4AOh, C.-Y. 2.3F, 4.3OOh, J. 1.1JOhmiya, S. 4.3HOhms, C. 2.1OOhmura, Y. 4.3AOhtsu, T. 4.2KOi, K. 3.2BOkada, H. 4.1KOkano, S. 2.4E, 4.1AOkayama, K. 4.2GOkimura, K. 1.4MOkrajni, J. 4.1MOkuno, D. 1.3JOkura, M. 4.3JOkuyama, K. 1.1NOliphant, K. 2.2AOlson, M. 1.4EOlsson, A. 1.4DOmiya, Y. 1.1L, 1.3L, 1.4L, 2.1LOmura, T. 4.2HOnizawa, K. 2.2E, 3.1M, 4.2KOnizawa, T. 3.1F, 4.3KOoki, S. 2.1EOprea, V. 3.2FOryniak, A. 1.3I, 1.4I, 2.3G, 4.2NOsada, T. 1.4BOsakabe K. 4.1K, 4.2KOshkai, P. 1.3N, 2.3DOtani, A. 1.4J, 2.1MOtani, T. 4.3K, 4.4KOthon, M. A. 2.1EOumaya, T. 4.1DOyama, Y. 1.1LOyamada, K.i 2.4MOza, S. 1.4KOzawa, N. 2.2HOzeki, G. 4.3FOzgur, C. 1.3FOzkan, M. 1.3FOzmaian, J. 2.1GPalm, N. 2.1HPan, J. 4.1APaolacci, F. 2.3JPapadakis, G. 2.4DPapatheocharis, T. 2.2JPape, G. 3.2IPappa, P. 2.2J, 2.3JParise, L. F. S. 3.2OPark, J. S. 4.2HPark, Y. 3.1KParker, S. 2.1H

Parrondo, J. 1.4DPease, D. 2.4MPeebles Jr., W. R. 2.1KPeel, M. J. 2.3BPellereau, B. 1.1E, 2.3EPellet, L. 4.1APeng, J. 2.3BPenso, J. 1.4K, 2.4G, 4.1JPeppa, S. 1.4NPerdikaris, P. C. 2.2JPereira, G. 2.3APerez, G. 4.2CPerez, M. 1.1EPerigaud, G. 2.4IPerl, M. 1.1H, 2.2MPerreux, D. 2.4BPeters, D. T. 1.1HPeterzol, A. 2.1HPetesch, C. 1.4G, 2.4FPetzova, J. 4.1EPhalippou, C. 3.1NPhilipp, C. 3.2EPiancaldini, R. 2.3HPickering, E. J. 2.4BPieszkalla, M. 3.2KPilvin, P. 2.3EPinho, J. 2.3BPinkawa, M. 2.3JPippan, R. 4.2EPistor, R. 4.4GPistora, V. 3.2KPiteau, P. 3.1NPitoiset, X. 2.1HPolasik, S. 3.2OPomarede, M. 4.1NPope, R. 4.3MPorter, M. 2.1IPosta, M. 3.2KPrandi, L. 2.3HPratelli, G. 2.1IPrimault, C. 1.3KPritchard, P. G. 1.3BPrucz, J. 1.3LPrueter, P. 2.4M, 3.1LPunch, E. 2.2EQian C. 4.1I, 4.4I, 4.1DQian, Y. 4.4IQiao, D. 2.4EQin M. 3.1BQiu, X. 2.3CQu, Q. 2.3BQuayyum, S. 3.1FRabin, B. H. 2.3ORackiewicz, D. 1.1NRadchenko, S. 1.3I, 1.4I, 2.3G, 4.2NRadebe, S. 1.4ARaggi, A. 1.3HRahnavard, Y. 2.1J, 2.4J, 2.4LRaibagkar, A. 2.4IRajaomazava III, T. E. 3.2DRambaud, P. 2.3BRana, M. 1.4FRashid, J. Y. R. 2.2MRashid, M. M. 2.2M

Rathbun, H. 2.1M, 2.2E, 2.3FRaugi, M. 2.3HRebak, R. B. 2.1E, 2.4CRech, J. 3.2BReed, G. 2.1IReese, S. H. 1.3C, 2.2C, 3.2CReeves, D. 3.1LReich, A. 2.2KReichert, C. 1.1LReichert, L. 1.1LReid, D. 1.4LReinhardt, W. 3.2GReiser, J. 4.2ERen, W. 3.1ERetz, N. 1.3HReza, M. S. 2.3JRezaie-Manesh, M. 2.3KRicciardi, G. 2.1NRieck, D. 3.2CRiedelmeier, S. 1.1BRitcey, A. 2.4NRiznic, J. 1.1D, 3.1NRobin, V. 1.3E, 1.4E, 3.2A, 3.2BRobinson, D. 3.1FRoch, F. 1.3KRodamaker, S. 1.3CRodery, C. 3.2LRodrigues, G. 1.3BRodriguez, O. M. H. 4.1NRogge, R. 2.4ORohart, P. 1.1BRojas, E. V. 2.4BRokhgireh, H. 4.1CRomero, H. P. 2.2BRomero, M. 2.1IRong, Y. 4.2IRosier, B. 1.3KRossi, M. 2.3DRossillon, F. 2.3E, 2.4E, 4.2CRothenhöfer, H. 1.1K, 3.1CRudenko, O. 2.3NRudland, D. 1.1O, 1.4O, 2.2E,

4.3A, 4.4ORudolph, J. 1.1C, 1.4G, 3.1C,

4.1C, 4.2DRuffet, F. 3.1NRuffin, M. 3.1LRuggieri, C. 1.4B, 2.2B, 3.1O, 3.2ORuggiero, A. 2.2B, 2.2M, 3.1GRuiz, E. 4.2ORuiz, R. 4.4GRush, P. 1.1NRybarz, M. 2.3CRyu, H.-W. 1.3BRyu, J.-S. 1.1JSabourin, M. 3.2BSaid, T. 4.2CSaida, K. 4.1HSaito, I. 4.1KSaito, K. 3.1D, 4.4ESaito, T. 4.1K, 4.2DSakaguchi, S. 4.1D, 4.2ESakai, M. 2.1MSakai, S. 2.3B

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSION

63

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSIONSakamoto, H. 4.2ESakata, M. 4.4HSakurai, H. 2.2ASallam, H. 2.1ASan Marchi, C. 4.1H, 4.2H, 4.3HSaraswat, R. 3.1OSaruwatari, T. 1.3CSarzosa, D. F. B. 1.4B, 3.1OSasaki, T. 4.4CSathyanarayanan, S. 2.4MSato, Ko. 1.1L, 1.3LSato, Ky. 2.1MSato, Ta. 4.4GSato, To. 3.2JSato, Yuk. 1.3JSato, Yus. 4.3JSatoh, K. 4.4KSavioli, R. 2.2BSawa, T. 1.1L, 1.3L, 1.4L, 2.1L,

4.1LSawadogo, T. 2.2NSayano, A. 4.1KScano, L. 2.2F, 2.3MScarth, D. 1.3M, 3.2AScenini, F. 4.1OSchaaf, M. 1.1L, 1.3L, 4.1LScheidemann, R. 4.4ASchiavone, M. 1.3HSchildberg, H.-P. 3.2ISchlücker, E. 1.1BSchnabel, H. 2.2OSchuler, X. 1.1C, 1.4C, 1.4G,

2.2C, 4.1GSchulz, A. 3.2CSchuurmans, P. 2.1NScott, C. 2.3GScott, P. 4.3AScully, S 1.3OSedaghati, R. 1.1GSegall, A. 3.1FSeibi, A. 3.1BSeichter, J. 1.3C, 3.2CSeidenfuss, M. 4.1GSeipp, T. 3.1HSeki, H. 1.3JSengupta, M. 3.1FSera, T. 1.4C, 2.1C, 2.4ESerasli, K. 2.1ESerizawa, H. 2.4ESerizawa, R. 3.2HServer W. 1.3M, 1.3KShahriari, D. 2.2HSham, T.-L. 2.4FShanina, B. 4.1HShannon, B. E. 4.2MShao, S. 4.3ISharples, J. K. 2.1B, 2.1O, 4.2AShazly, M. 4.4EShek, G. 3.2AShelton, M. 1.3LShen, X. 4.3IShepherd, J. 3.1I, 3.2ISheridan, M. 2.3FSherry, A. H. 1.4E, 4.1O, 4.2A, 4.2O

Shi, Jia. 1.3A, 2.1A, 2.2AShi, Jin. 1.1IShi, Ju. 2.1A, 2.2AShibata, K. 4.3JShibuya, Y. 2.2AShigeyama, H. 4.4FShillor, M. 2.1LShim, D. J. 1.1O, 1.4O, 2.1A,

2.2E, 4.2A, 4.3A, 4.4OShim, H. 4.4AShimazu, H. 4.2HShimojima, K. 2.3DShin, C. S. 4.3EShin, S. B. 2.4G, 3.2FShintani, A. 3.1J, 3.2NShipley, M. 1.3MShirahatti, A. M. 4.1FShirako, H. 2.4EShirasaki, T. 3.2JShiratori, M. 2.1M, 4.1KShoji, T. 2.2HShokouhi, S. K. S. 2.1J, 2.4JShokouhi, S. 2.4LShort, M. 2.2HShou, B. 1.1BShu, X. 1.1BShuai, J. 2.1DShuaib, A. 4.4EShuuhei, T. 4.1KShyam, G. 3.1EShyvanyuk, V. 4.1HSi, J. 3.2HSigrist, J.-F. 4.1NSilva, A. C. 1.3BSimon, J.-W. 2.4GSimonen, F. A. 3.2MSimonet, Y. 1.1BSimpson, J. 2.4FSims, J. R. 2.4MSingh, Harm. 4.2DSingh, Harp. 4.2DSinha, Sri 1.4DSisan, A. 3.1OSlifka, A. 4.1HSmeulers, J. P. M. 3.2I, 4.4CSmith, D. 1.4E, 2.1E, 2.1O, 2.2F,

2.3B, 4.1FSmith, G. 2.2FSmith, M. C. 1.3E, 1.1ESmith, R. J. 4.1O, 4.2OSmith, R. 2.3OSnow, S. 4.2GSodeyama, H. 4.3JSokolov, M. A. 2.3O, 4.2ESolin, J. 2.2CSomerday, B. 4.1H, 4.2H, 4.3HSommerville, D. 2.4I, 3.1BSone, A. 2.1JSoneda, N. 4.2KSperko, W. 1.4FSpeziali, F. 2.3HSpicer, M. A. 2.2ASpindler, M. W 2.2FSrivastava, H. M. 1.3F

Stalheim, D. G. 4.1HStaron, P. 2.4GStefanovic, R. 3.2FStefenelli, M. 2.4GStelmar, S. 4.1CStockton, C. 1.3AStofleth, J. 3.1IStrnadel, B. 4.3ESu, H.-C. 2.4J, 4.2JSuárez, C. 1.4DSubramanian, K. 2.4GSugawara, K. 4.1KSugihara, T. 4.2ESugiura, R. 4.3F, 4.4FSugiyama, Y. 4.2HSumitani, T. 2.2NSumme, A. 2.2ASun, H. 4.1ISun, L. 4.3ISun, X. 4.1ISun, Z. 2.3MSunakoda, K. 2.2A, 4.3JSurh, H. B. 4.4OSuzuki, H. 1.1NSuzuki, R. 1.3BSuzuki, S. 1.1BSuzuki, Y. 3.1MSvingen, B. 2.1DSwanek, D. 4.4ETaagepera, J. 3.1HTabuchi, M. 1.3O, 3.2FTada, N. 2.2HTagawa, Y. 2.4GTaghizadeh, A. 1.1GTahara, T. 4.1J, 4.2MTakahashi, A. 3.1DTakahashi, Koj. 1.4B, 2.1MTakahashi, Kos. 2.4DTakahashi, S. 1.1NTakahashi, Tsun. 2.1JTakahashi, Tsuy. 1.3JTakai, K. 4.1HTakamura, R. 1.1ITakanashi, M. 4.4ATakasugi, Y. 2.2LTakaya, S. 4.3K, 4.4KTakazawa, H. 3.1DTakemoto, A. 2.3DTakeuchi, H. 4.3FTalamantes-Silva, J. 1.1HTaler, D. 2.2FTaler, J. 2.2FTamura, A. 1.1NTanaka, G. 3.1JTang, D. 4.3LTang, P. 2.3FTang, X. Y. 4.4ITang, X. 4.2HTaniguchi, K. 1.3JTaniguchi, T. 1.1J, 3.2JTao, Y. 2.1HTarnowski, K. 4.4FTartare, N. 1.1KTateno, M. 2.4A

Tatman, J. 2.3OTchoukien, D. 3.2ATemma, K. 1.4LTennant, D. 2.4ITerai, T. 2.1DTerakado, T. 1.4MTerunuma, M. 4.2HTesta, G. 2.2BTeus, S. 4.1HThibaux, P. 2.3EThigpen, B. 2.3HThionnet, A. 3.1AThomas, Kel. 2.4IThomas, Ken. 1.4KTichy, R. 1.4OTijsseling, A. 2.1DTimms, C. 4.4ETipping, D. 3.1CTobita, T. 4.2KTochiki, K. 1.4JTodoroki, A. 1.1OToft, A. 2.1OTognarelli, L. 1.3HTomio, Y. 4.2HTomizawa, T. 4.3JTooley, K. A. 1.1HTorigata, K. 4.1ATorisaka, A. 3.2JTörök, G. 2.1OToth, R. 1.4MTozzi, P. 1.4ATran, V.-X. 4.1ATraversari, R. 1.3HTriantafyllou, G. 1.4NTrieglaff, R. 3.2CTroughton, M. 2.2ATrull, M. 4.2OTruman, C. E. 2.2E, 2.2F, 4.1FTsai, C.-S. 2.4J, 4.2JTso, C.-F. 4.2GTsubaki, S. 1.1L, 1.3LTsuji, H. 1.4J, 4.1MTsujita, K. 3.1JTu, S. T. 2.1B, 2.3E, 3.2HTurcu, F. 2.3HTwardawa, M. 4.1MTyson, W. 3.1OUchida, M. 2.2HUchiyama, Y. 4.2NUdagawa, M. 4.1A, 4.2KUeno, T. 1.4NUlku, E. 1.3FUrabe, Y. 2.1MUre, J. 3.1CUtsumi, S. 2.2NVaidya, N. 1.3FValiorgue, F. 3.2BVan Beek, P. 4.4Cvan der Linden, B. 2.4DVan Gelderen, D. 3.2Kvan Loon, L. 1.4HVan Minnebruggen, K. 4.2OVan Tichelen, K. 2.1NVan Velsor, J. 2.1H

64

AUTHOR INDEXNAME SESSION NAME SESSION NAME SESSION NAME SESSIONVarelis, G. E. 2.1B, 2.2JVathi, M. 2.3JVaughan, J. D. 2.4IVecchio, R. S. 1.4D, 3.1MVeiga, J. 1.3L, 4.2LVeljkovic, M. 3.1GVenkata, K. A. 1.3E, 2.2EVidal, L. E. O. 4.1NVidard, S. 3.2CVierendeels, J. 2.1NVijlbrief, O. 1.3N, 2.4NVincent, L. 4.2CVivas, G. 1.1GVivio, F. 3.2FVlcek, L. 1.4CVock, Preston A. 2.3LVolak, J. 1.4OVolfson, B. 1.3GVoormeeren, L. O. 4.3EVormwald, M. 4.1CVosoughifar, H. R. 2.1J, 2.4J, 2.4LWada, T. 2.4JWagner, J. 3.2CWakai, T. 3.1FWalaszek, H. 2.4LWalker, R. H. 2.4AWalsh, J. 4.4EWalter, M. 3.1B, 3.1CWalters, C. L. 4.3EWang, Bi. 1.4K, 4.2IWang, Bo 2.3MWang, C. 2.1GWang, H.-T. 2.4OWang, Hao 4.2JWang, Haoy. 4.1IWang, Hu. 3.2J, 4.3I, 4.4IWang, J. 3.1OWang, L. 4.3IWang, M. 3.1KWang, Xia. 2.4LWang, Xin 2.4OWang, Y.-M. 2.4JWang, Yan. 2.4E, 2.4FWang, Yang. 2.3EWang, Yin. 1.4MWang, Yiq. 2.2FWang, Zhe. 4.1IWang, Zhi. 1.4MWasylyk, A. 2.1FWatakabe, T. 1.4JWatanabe, D. 4.1G, 4.2D, 4.4KWatanabe, Masah. 3.2NWatanabe, Masan. 4.1KWatanabe, O. 2.2F, 3.1M, 4.2A,

4.3A, 4.2F

Watanabe, Sh. 4.2AWatanabe, So. 4.4KWatanabe, Y. 2.2H, 4.3OWaterland, J. 1.1L, 1.4LWatson, C. 2.2CWeaver, D. S. 1.1DWeber, M. 2.3AWebster, G. 4.4FWehbi, M. 2.3CWei, G. 2.3FWei, X. 4.4HWei, Z. 2.3C, 3.2K, 4.2C, 4.3GWeichert, D. 2.4GWeissenberg, T. 1.4C, 2.2CWeitze, W. 2.1CWen, J.-F. 2.1BWen, Y. 2.3EWeng, D. 4.2JWeon, K. J. 2.3L, 3.1D, 4.1EWernicke, R. 3.2CWest, A. 2.1DWieschollek, M. 2.2J, 2.3JWiger, T. 3.1GWilliams, A. 3.2EWilliams, P. 4.1OWilluweit, A. 1.1C, 4.2DWilson, J. 4.3GWilson, R. 4.4GWimpory, R. C 4.4FWinter, G. 2.4GWirgart, J. E. 2.1DWojnar, J. 1.3HWolfe, K. 3.1MWoods, K. 1.4KWright, J. 2.4FWright, R. 2.4FWu, C. 3.1BWu, R. 4.4IWu, X. 3.2HXavier, L. 1.3BXia, F. 4.2IXia, L. 2.4LXia, Z. 3.2G, 4.4CXie, G. 4.4IXie, Y. 1.4MXu, H. 1.3AXu, St. 1.1O, 1.3M, 3.2AXu, Su 2.4OXu, W. 2.2KXuan, F.-Z. 2.1B, 3.2HXue, J. 2.3MXuedong, C. 1.4K, 2.1H, 2.3L,

4.2F, 4.4IYaksh, M. 4.2GYamada, S. 3.2H

Yamagiwa, K. 4.4CYamaguchi, A. 4.1MYamaguchi, M. 1.4NYamaguchi, Y. 3.1MYamamoto, E. 4.1JYamamoto, Ka. 1.4MYamamoto, Ke. 1.1BYamamoto, M. 4.2KYamamoto, Ta. 1.4JYamamoto, To. 4.4CYamamoto, Y. 2.4GYamashita, K. 4.4HYamazaki, T. 2.3KYan, C. 2.1HYanagida, N. 4.4EYanagihara, S. 1.3BYanase, K. 2.2LYang, F. 3.2KYang, G. 4.1IYang, H. 2.4LYang, J. 3.2H, 4.4IYang, T. 1.4KYang, Y. 1.4G, 2.3OYasuda, M. 1.4C, 2.1CYasuoka, T. 1.1OYates, J. R. 4.1OYatomi, M. 3.2F, 4.1FYe, C. 2.2K, 2.3K, 4.2IYe, J. 4.2FYescas, M. 1.3E, 1.4EYetisir, M. 4.4GYi, S. J. 1.1DYin, L. 4.1IYip, M. 3.1I, 3.2IYokobori Jr., A. T. 4.3F, 4.4FYokoi, E. 2.4AYokoi, S. 4.4KYokota, Y. 4.3JYoneda, K. 4.4HYoon, J. K. 2.2GYoon, J. Y. 2.2HYoon, S. 2.4IYoru, W. 4.3HYoshida, K. 3.2FYoshida, N. 4.1MYoshii, K. 4.1GYoshikubo, F. 1.4MYoshimoto, K. 4.1D, 4.2E, 4.2KYoshimura, N. 4.4GYoshizawa, T. 2.2HYounan, M. 2.1AYoung, B. A. 4.4OYoung, G. 1.1KYoussef, S. 3.2BYu, H. 4.4I

Yu, K. R. 2.2NYu, Y. 2.2KYun, K. W. 2.3LYuritzinn, T. 2.2OYuya, H. 1.3MZaki, A. 2.1LZarazovskii, M. 1.3I, 1.4IZdarek, J. 1.1DZeng, L. 4.1GZeng, S. 3.1HZhang, F. 4.1AZhang, H. 2.3CZhang, J. 4.3LZhang, L. 4.1IZhang, La. 2.2LZhang, W. 2.4EZhang, Y. 2.2LZhang, Y. 3.2GZhang, Z. Z. 4.2IZhao, B. 4.3LZhao, Ji. 3.1O, 4.1A, 4.3IZhao, L. 2.3F, 4.3IZhao, Y. Z. 4.1IZheng, G. 1.4EZheng, Jin. 1.1B, 1.3A, 2.1A, 2.2AZheng, Jio. 3.2H, 4.4IZheng, M. 2.3FZhi, Y. 2.3KZhong, J. 4.4IZhong, S. 1.3A, 2.1AZhou, Cha. 2.3B, 2.3MZhou, Chi. 4.1IZhou, F. 1.3G, 4.3IZhou, H. 1.1O, 4.4FZhou, J. 4.4HZhou, R. 4.1MZhou, X. 2.1DZhu, G. 2.3FZhu, H. 4.3LZhu, J. 2.3L, 4.4IZhu, X.-K. 4.3AZhu, Xian. 3.2OZhu, Xiao. 1.4BZiada, S. R. 1.1N, 1.3N, 2.3N,

2.4N, 4.2NZiegler, R. 4.2DZisis, I. 2.4DZolfaghari, A. 2.2HZu, L. 2.3AZysk, G. 1.4D

65

PARIS MARRIOTT RIVE GAUCHE HOTEL & CONFERENCE CENTER

66

PARIS MARRIOTT RIVE GAUCHE HOTEL & CONFERENCE CENTER

67

PVP 2014

AnaheimHyatt Regency Orange County

July 20–24, 2014

ASME Pressure Vessels & Piping ConferenceInnovation and Imagination in Pressure Vessels & Piping

Join us in beautiful Anaheim, California, for the 2014 ASME Pressure Vessels & Piping Conference! PVP Conferences are known to be the outstanding internationaltechnical forum for participants to further their knowledge-base through exposure to diverse engineering topics and dissemination of cutting-edge technology. Opportunitiesabound to exchange opinions and ideas, both from industry and academia, in the many topical areas related to Pressure Vessel and Piping technologies for the Powerand Process Industries. Participants from approximately 40 countries in Europe, Africa, the Middle East, Asia, the Americas, and the Oceania islands assure an interestingmixture of topics, ideas, and viewpoints.The ASME Pressure Vessels & Piping Division is the primary sponsor of the PVP-2014 Conference, with additional participation by the ASME Nondestructive Examination(NDE) Division. More than 190 paper and panel sessions are planned, as well as workshops, tutorials, NDE and Software Demonstration Forums, and our traditionalStudent Paper Competition and Symposium.GENERAL TOPICS: (1) Codes & Standards; (2) Computer Technology & Bolted Joints; (3) Design & Analysis; (4) Fluid-Structure Interaction; (5) High Pressure Tech-nology; (6) Materials & Fabrication; (7) Operations, Applications & Components; (8) Seismic Engineering; (9) Non-Destructive Examination; and (10) our Student PaperCompetition and Symposium.SCHEDULE: Abstracts are due by November 11, 2013. Authors will be notified of abstract acceptance by December 2, 2013. Draft papers are due by February 10,2014. Paper peer review comments will be returned by March 10, 2014. A Copyright Agreement Form for each paper, and the final manuscripts in the standard ASMEformat for publication, must be received by April 7, 2014. All presented technical papers will be published as referencable documents available post-conference viahardcopy or electronic media.INFORMATION: The conference website URL is: http://www.asmeconferences.org/PVP2014/. Technical paper abstracts must be submitted electronically through thewebsite. Visit the website for additional information.

PVP Conference Chair PVP Technical Program ChairDaniel T. Peters Marina B. Ruggles-Wrenn

Structural Integrity Associates, Inc. Air Force Institute of Technology16339 Irish Road AFIT/ENY

Edinboro, PA 16412, USA 2950 Hobson WayPhone/Fax: 814-440-8173/330-899-9753 WPAFB, OH 45433-7765, USA

E-mail: asmepeters@gmail.com Phone: 937-255-3636x4641Email: ruggles-wrennm1@asme.org

Sponsorship ChairCarl E. Jaske

Det Norske Veritas (USA), Inc.5777 Frantz Road

Dublin, OH 43017-1386, USAPhone: 614-761-6916/Fax: 614-761-1633

E-mail: Carl.Jaske@dnv.com

ASME 2013 Pressure Vessels & Piping Conference

ASME

Two Park Avenue

New York, NY 10016-5990

www.asme.org

A Sincere Thanks to Our Sponsors

Silver Sponsors

Bronze Sponsors

Refreshment Break Sponsors