the educational services commission of new jersey grounds ...w 253-7830 bracket, mounting cb........

CATERPILLAR MACHINE PRICE LIST

WT-HM

HYDRO-MECHANICAL WORK TOOLS Ship Weight List Pricelbs At Factory

Standard Equipment:

****************************************THIS IS THE PRICE LIST FORHYDRO-MECHANICAL WORK TOOLS.

IN THIS PRICE LIST, PRODUCTS ARE LISTEDBY WORK TOOL FAMILY IN THE FOLLOWINGSEQUENCE:- COMPACTING VIBRATORY PLATES- CRUSHERS- MULTI-PROCESSORS- PULVERIZERS- SHEARS- DEMOLITION AND SORTING GRAPPLES- ORANGE PEEL GRAPPLES

ALL ORDERS MUST BE DONE THROUGH CMOPS.

FOR QUESTIONS, SUPPORT AND QUOTATIONSPLEASE CONTACT YOUR LOCAL WORK TOOLSALES REPRESENTATIVE OR COMMERCIALANALYST****************************************

STABILITY:Always check the machine configurationwith the desired work tool combinationon stability. This price list only indi-cates possible tool-machine combinationsActual stability depends on machine-toolconfiguration, with or without quickcoupler, and sort of application.

WARNING:Demolition tools can create a hazardfrom flying objects. Caterpillar recom-mends installing front guards on thecabs of the excavators. Failure to do socan lead to injury or death.

MACHINE HYDRAULICS REQUIREMENT:In order to operate a Hydro-MechanicalWork Tool, the machine must be equippedwith control and hydraulic lines forrotation and/or opening/closing.

TOP LEVEL

Supersedes 02JAN2018 Subject to change without notice Effective 02JAN2019Printed in USACaterpillar: Confidential Green

US-A-19-01 A U. S. DOLLAR CURRENCY WT-HM-001

Caterpillar Work Tools Price Pages 1-2-19 - WT-HMThe Educational Services Commission of New Jersey

NJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25

1 Bid Term: 2/20/19 - 2/19/21


WT-HM

HYDRO-MECHANICAL WORK TOOLS Ship Weight List Pricelbs At Factory

0P-4687 HYDRO-MECHANICAL WORK TOOLS 0 NC............................

NOTE:For additional product information (features, benefits, matching),please refer to the following Caterpillar Media numbers:

COMPACTING VIBRATORY PLATES..............GEJQ0182MULTI-PROCESSORS...................................AEXQ1064PULVERIZERS..............................................GEJH0023SHEARS.....................................................GEJQ9341DEMOLITION AND SORTING GRAPPLES.........AEXQ7119 / HEJQ0338ORANGE PEEL GRAPPLES.............................GEJQ9337CLAMSHELL GRAPPLES...............................AEHQ6887 / HEQX3429





2 Bid Term: 2/20/19 - 2/19/21


WT-HM

REF Ship Weight List PriceUSE NO. lbs At FactoryOPTIONAL ATTACHMENTS

COMPACTING VIBRATORY PLATES

CVP75 COMPACTORFor Caterpillar machine models:311F, 312D2, 312D2 GC, 312E, 313D2, 313D2 LGP, 313F GC, 314E CR,314F, 315F CR, 316E, 316F, 318D2, 318E, 318FM313D, M314F, M315D, M315D2, M315F, M316D, M316F, M317D2, M317F,M318D, M318F, M320D2, M320F, M322F

W 205-5901 CVP75 COMPACTOR PLATE 1,765 $12,672 NI...........................LANE 1 - AVAILABLE FOR ADSD REGIONREQUIRES: Mounting bracket and connecting linesOPTIONAL: Blade, backfill

W 212-3450 BLADE, BACKFILL 242 $1,611 NI....................................LANE 1 - AVAILABLE FOR ADSD REGION

CVP75 MOUNTING BRACKETS

W 482-2130 BRACKET, MOUNTING 313 $3,782.................................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: 311, 312, 313, 314 and 315F

W 485-6860 BRACKET, MOUNTING 425 $3,778 NI.................................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: 315D, 316E, 316F, 318E, 318F, 318D2 and M313D, M314F,M315D, M315F, M315D2, M316D, M316F, M317D2, M317F, M318F

W 325-9326 BRACKET, MOUNTING (B) 443 $3,839 NI..............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: B-linkage

W 215-6525 BRACKET, MOUNTING(QC)-PIN LOCK 282 $2,908 NI.....................FOR USE WITH: Cat. 312, A-linkage and excavators equipped withPin Lock Quick Coupler 208-3655

W 215-6527 BRACKET, MOUNTING(QC)-PIN LOCK 571 $5,000 NI.....................FOR USE WITH: Cat 315, 316 Linkage and excavators equipped withPin Lock Quick Coupler 208-3657

W 166-1272 BRACKET,MOUNTING(QC)-DEDICATED 514 $2,697 NI.....................FOR USE WITH: 315-316 equipped with Dedicated coupler

W 112-8202 BRACKET,MOUNTING(QC)-DEDICATED 914 $5,563 NI.....................FOR USE WITH: 318-319D equipped with Dedicated Coupler

W 265-3831 BRACKET, SWIVEL 410 $2,957 NI...................................





3 Bid Term: 2/20/19 - 2/19/21


WT-HM


COMPACTING VIBRATORY PLATES (CONT.)

CVP75 CONNECTING LINES

W 213-0472 LINES, CONNECTING 22 $731 NI...................................LANE 1 - AVAILABLE FOR ADSD

CVP110 COMPACTORFor Caterpillar machine models:320, 320 GC, 323320D2, 320D2 GC, 320E, 320E RR, 320F, 323D2, 323E, 323F, 324E,325F CR, 326D2, 326F, 329E, 330D2, 330F, 335F CR, 336D2, 336D2 GC336D2 XE, 336E, 336E H, 336F, 336F XE, 340D2, 340F, 340F UHDM322D, M322D2, M322F

FOR THE 320GC PLEASE CONTACT YOUR WT SPECIALIST FOR COMPATIBILITY

W 205-5902 CVP110 COMPACTOR PLATE 2,319 $21,613 NI..........................LANE 1 - AVAILABLE FOR ADSD REGIONREQUIRES: Mounting bracket and connecting linesOPTIONAL: Blade, backfill

W 212-0789 BLADE, BACKFILL 346 $2,075 NI....................................LANE 1 - AVAILABLE FOR ADSD REGION

CVP110 MOUNTING BRACKETS

W 325-9326 BRACKET, MOUNTING (B) 443 $3,839 NI..............................FOR USE WITH: B-linkage

W 484-7110 BRACKET, MOUNTING 560 $5,600 NI.................................FOR USE WITH: CB-linkage

W 482-4315 BRACKET, MOUNTING (DB) 646 $5,600 NI............................FOR USE WITH: DB-linkage

W 486-9260 BRACKET, MOUNTING (TB) 891 $5,600 NI.............................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: TB-linkage

W 265-3831 BRACKET, SWIVEL 410 $2,957 NI...................................

CVP110 CONNECTING LINES

W 212-0785 LINES, CONNECTING 27 $731 NI...................................LANE 1 - AVAILABLE FOR ADSD





4 Bid Term: 2/20/19 - 2/19/21


WT-HM


MULTI-PROCESSORS

MP318 MULTI-PROCESSOR FRAMEFor Caterpillar machine models:318E, 318F, 320D2, 320D2 GC, 320, 320GC, 320E, 320E RR, 320F, 323D2,323, 324E, 325F CR, 326D2, 326FM315D, M316D, M316F, M317D2, M318D, M318F, M320D2, M320F, M322D,M322D2, M322F


W 381-4048 MP318 MULTIPROCESSOR FRAME 2,601 $73,039 NI......................LANE 1 - AVAILABLE FOR ADSDREQUIRES: Jaws, mounting bracket and connecting linesFor the 320GC please contact your WT Specialist for compatibility

MP318 JAW SETS

W 399-1968 MP318 JAW CONCRETE CUTTER CC 1,592 $29,639 NI....................LANE 1 - AVAILABLE FOR ADSD

W 415-7261 MP318 JAW DEMOLITION D 1,605 $25,193 NI..........................LANE 1 - AVAILABLE FOR ADSD

W 419-9178 MP318 JAW PULVERIZER P 1,876 $26,675 NI...........................LANE 1 - AVAILABLE FOR ADSD

W 399-4291 MP318 JAW SHEAR S 1,466 $29,639 NI...............................LANE 1 - AVAILABLE FOR ADSD

W 549-8018 MP318 JAW UNIVERSAL U 1,850 $29,639 NI...........................LANE 1 - AVAILABLE FOR ADSD

MP318 MOUNTING BRACKETSPlease See AEXQ1064 for Bracket Matching

W 169-4967 BRACKET, MOUNTING STICK 350 $3,738 NI............................LANE 1 - AVAILABLE FOR ADSDFor use with: 315D, 316F Linkage

W 299-0293 BRACKET, MOUNTING B 448 $3,738 NI...............................LANE 1 - AVAILABLE FOR ADSDFor use with: B Linkage

W 253-7830 BRACKET, MOUNTING CB 562 $3,738 NI..............................LANE 1 - AVAILABLE FOR ADSDFor use with: CB Linkage





5 Bid Term: 2/20/19 - 2/19/21


WT-HM


MULTI-PROCESSORS (CONT.)

MP318 MOUNTING BRACKETS (Cont.)

Contact CAT Worktools for Mounting Brackets for M-Series Machine

MP318 CONNECTING LINES

W 428-5978 LINES, CONNECTING 56 $1,474 NI...................................FOR USE WITH: 315 linkage

W 244-3144 LINES, CONNECTING 55 $1,474 NI...................................FOR USE WITH: B or CB linkage

Contact CAT Worktools for Connecting Lines for M-Series Machinee

MP318 CONVERSION KIT

W 394-3425 KIT, CONVERT MP318 - MP15 JAWS 161 $4,776 NI.....................Conversion kit to place MP15 jaws into MP318 frame.

MP324 MULTI-PROCESSOR FRAMEFor Caterpillar machine models:324E, 326D2, 326F, 329E, 330D2, 330F, 335F CR, 336D2,336D2 GC, 336D2 XE, 336E H, 336F, 336F XE

W 381-4042 MP324 MULTIPROCESSOR FRAME 3,485 $92,179 NI......................LANE 1 - AVAILABLE FOR ADSDREQUIRES: Jaws, mounting bracket and connecting lines

MP324 JAW SETS

W 395-0280 MP324 JAW CONCRETE CUTTER CC 2,295 $34,917 NI....................LANE 1 - AVAILABLE FOR ADSD

W 397-9681 MP324 JAW DEMOLITION D 2,346 $29,679 NI..........................LANE 1 - AVAILABLE FOR ADSD

W 388-0000 MP324 JAW PULVERIZER P 2,573 $31,424 NI...........................LANE 1 - AVAILABLE FOR ADSD

W 417-0589 MP324 JAW SHEAR S 2,094 $34,917 NI..............................LANE 1 - AVAILABLE FOR ADSD





6 Bid Term: 2/20/19 - 2/19/21


WT-HM



MP324 JAW SETS (Cont.)

W 418-6385 MP324 JAW TANK SHEAR TS 2,498 $40,154 NI........................LANE 1 - AVAILABLE FOR ADSD

W 549-8017 MP324 JAW UNIVERSAL U 2,674 $34,917 NI...........................LANE 1- AVAILABLE FOR ADSD REGION

MP324 MOUNTING BRACKETSPlease See AEXQ1064 For Bracket Matching

W 253-7830 BRACKET, MOUNTING CB 562 $3,738 NI..............................LANE 1 WORK TOOLFOR USE WITH: CB-Linkage

W 254-4463 BRACKET, MOUNTING DB 522 $3,738 NI..............................LANE 1 WORK TOOLFOR USE WITH: DB-Linkage

MP324 CONNECTING LINESPlease See AEXQ1064 for Connecting Lines Matching

W 244-3144 LINES, CONNECTING 55 $1,474 NI...................................FOR USE WITH: G320B-D 274-9848 GRAPPLE

MP324 CONVERSION KITS

W 433-0219 KIT,CONVERT MP324-MP20 TS JAWS 181 $5,235 NI....................Conversion kit to place MP20 TS jaws into MP324 frame.

MP332 MULTI-PROCESSOR FRAMEFor Caterpillar machine models:329E, 330D2, 336D2, 336D2 XE, 336E, 336E H, 336F, 336F XE, 340D2,340F, 340F UHD, 349D2, 349E, 349F, 349F XE, 352F, 352F XE

W 453-9680 MP332 MULTIPROCESSOR FRAME 4,123 $96,208 NI......................

MP332 JAW SETS

W 454-5851 MP332 JAW CONCRETE CUTTER CC 3,408 $30,322 NI....................

W 459-4619 MP332 JAW DEMOLITION D 3,686 $30,322 NI..........................





7 Bid Term: 2/20/19 - 2/19/21


WT-HM



MP332 JAW SETS (Cont.)

W 459-3004 MP332 JAW PULVERIZER P 3,726 $42,714 NI...........................

W 455-1469 MP332 JAW SHEAR S 3,331 $42,714 NI...............................

W 462-4503 MP332 JAW TANK SHEAR TS 4,458 $46,006 NI.........................

MP332 MOUNTING BRACKETS

W 501-4147 BRACKET, MOUNTING DB 712 $7,053 NI..............................FOR USE WITH: DB Linkage

W 461-7215 BRACKET, MOUNTING TB 809 $7,053 NI..............................FOR USE WITH: TB Linkage

W 538-9549 BRACKET, MOUNTING 681 $7,053 NI.................................FOR USE WITH: UHD PIN ON

W 500-6446 BRACKET, MOUNTING 1,016 $7,053 NI...............................

W 458-6470 BRACKET, MOUNTING 836 $7,053 NI.................................

W 474-2780 BRACKET, MOUNTING 556 $7,053.................................Flat Top Bracket


W 513-2260 LINES, CONNECTOR 60 $2,222 NI...................................FOR USE WITH: CAT. 336E DB + CENTERLOCK QC

MP332 CONVERSION KITS

W 454-0528 KIT, CONVERT MP30-MP332 JAW 370 $5,636 NI........................Conversion kit to place MP30 jaws into MP332 frame, except of TS jaw

W 454-2716 KIT,CONVERT MP30-MP332 TS JAWS 337 $5,636 NI.....................Conversion kit to place MP30 TS jaws into MP332 frame.

MP345 MULTI-PROCESSOR FRAMEFor Caterpillar machine models:336D2, 336D2 XE, 336E, 336EH, 340D2,349D2, 349E, 349F, 349F XE, 352F, 352F XE






8 Bid Term: 2/20/19 - 2/19/21


WT-HM



MP345 JAW SETS




W 465-0361 MP345 JAW SHEAR 4,996 $53,240 NI................................

MP345 BRACKETS

W 461-7215 BRACKET, MOUNTING TB 809 $7,053 NI..............................FOR USE WITH: TB Linkage

W 501-3557 BRACKET, MOUNTING VB & UB 1,045 $7,053 NI........................FOR USE WITH: VB & UB linkage


W 526-8817 LINES, CONNECTOR 86 $2,222 NI...................................FOR USE WITH: CAT. 349E/349F TB linkage

W 526-8815 LINES, CONNECTOR 90 $2,222 NI...................................FOR USE WITH: CAT. 349E/349F UB/VB + CW55

MP365 MULTI-PROCESSOR FRAMEFor Caterpillar machine models:349E, 349D2, 349F XE, 352F, 352F XE374F, 390F


MP365 JAW SETS




W 482-5133 MP365 JAW SHEAR S 6,806 $70,264 NI..............................





9 Bid Term: 2/20/19 - 2/19/21


WT-HM



MP365 MOUNTING BRACKETS

W 522-5867 BRACKET, MOUNTING VB 1,228 $8,243 NI............................FOR USE WITH: VB Linkage

W 522-5872 BRACKET, MOUNTING WB 1,387 $8,243 NI...........................FOR USE WITH: WB Linkage

W 524-2395 BRACKET, MOUNTING HB 1,391 $8,243 NI............................FOR USE WITH: HB Linkage

W 524-2412 BRACKET, MOUNTING 1,016 $8,243 NI...............................Flat Top Bracket


W 526-1075 LINES, CONNECTOR 99 $2,436 NI...................................FOR USE WITH: CAT. 374F VB + CW-70

W 526-1896 LINES, CONNECTOR 108 $2,436 NI..................................FOR USE WITH: CAT. 374F WB + CW-70

W 526-6600 LINES, CONNECTOR 84 $2,436 NI...................................FOR USE WITH: CAT. 390F HB

PULVERIZERS

P215 HYDRAULIC PULVERIZERFor Caterpillar machine models:316E, 316F, 318D2, 318E, 318F, 320D2, 320GC, 320D2 GC, 320, 320E,320E RR, 320F, 323D2, 323, 323E, 323F, 324E, 325F CR, 326D2, 326FM315D, M316D, M316F, M317D2, M318D, M318F, M320D2, M320F, M322D,M322D2, M322F

W 349-6023 P215 HYDRAULIC PULVERIZER 3,710 $61,568 NI.........................LANE 1 - AVAILABLE FOR ADSD REGIONREQUIRES: Mounting bracket and connecting linesFor the 320GC please contact your WT Specialist for compatibility

P215 MOUNTING BRACKETSPlease see GEJH0023 for Bracket Matching

W 169-4967 BRACKET, MOUNTING STICK 350 $3,738 NI............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: Cat. 315, 316 Linkage

W 299-0293 BRACKET, MOUNTING B 448 $3,738 NI...............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: B Linkage





10 Bid Term: 2/20/19 - 2/19/21


WT-HM


PULVERIZERS (CONT.)

P215 MOUNTING BRACKETS (Cont.)

W 253-7830 BRACKET, MOUNTING CB 562 $3,738 NI..............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: CB Linkage

P215 CONNECTING LINESPlease see GEJH0023 for Connecting Lines Matching

W 357-9482 LINES, CONNECTING 36 $842 NI...................................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: P215 Pin on

W 357-9484 LINES, CONNECTING 49 $842 NI...................................LANE 1 WORK TOOLFOR USE WITH: P215/P225 and CAT Pin Grabber Coupler

P225 HYDRAULIC PULVERIZERFor Caterpillar machine models:320D2, 323D2, 324E, 326D2, 326F, 329E, 330D2, 330F, 335F CR, 336D2,336D2 GC, 336D2 XE, 336E, 336E H, 336F, 336F XE

W 349-6026 P225 HYDRAULIC PULVERIZER 5,467 $74,308 NI.........................LANE 1 - AVAILABLE FOR ADSD REGIONREQUIRES: Mounting bracket and connecting lines

P225 MOUNTING BRACKETSPlease See GEJH0023 for Bracket Matching

W 299-0293 BRACKET, MOUNTING B 448 $3,738...............................448 $3,738 NI

FOR USE WITH: B Linkage

W 253-7830 BRACKET, MOUNTING CB 562 $3,738..............................562 $3,738 NI

FOR USE WITH: CB Linkgae

W 254-4463 BRACKET, MOUNTING DB 522 $3,738..............................522 $3,738 NI

LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: DB Linkage

P225 CONNECTING LINESPlease See GEJH0023 for Bracket Matching

W 357-9490 LINES, CONNECTING 48 $842 NI...................................LANE 1 - AVAILABLE FOR ADSD REGION





11 Bid Term: 2/20/19 - 2/19/21


WT-HM


PULVERIZERS (CONT.)

P225 CONNECTING LINES (Cont.)

W 357-9484 LINES, CONNECTING 49 $842 NI...................................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: P215/P225 and CAT Pin Grabber Coupler

P235 HYDRAULIC PULVERIZERFor Caterpillar machine models:329E, 330D2, 336D2, 336D2 XE, 336E, 336E H, 336F, 336F XE, 340D2,340F, 340F UHD, 349D2, 349E, 349F, 349F XE, 352F, 352F XE

W 349-6030 P235 HYDRAULIC PULVERIZER 7,542 $104,031 NI.........................LANE 1 - AVAILABLE FOR ADSD REGIONREQUIRES: Mounting bracket and connecting lines

P235 MOUNTING BRACKETSPlease See GEJH0023 for Bracket Matching

W 254-4039 BRACKET, MOUNTING DB 642 $5,179 NI..............................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: DB Linkage

W 255-0001 BRACKET, MOUNTING TB 758 $5,179 NI..............................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: TB Linkage

W 276-7982 BRACKET, MOUNTING UB 1,164 $5,179 NI............................FOR USE WITH: UB linkage

P235 CONNECTING LINESPlease See GEJH0023 for Connecting Lines Matching

W 357-9493 LINES, CONNECTING 52 $842 NI...................................LANE 1 - AVAILABLE FOR ADSD REGION





12 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS

S325BFor Caterpillar machine models:316E, 316F, 318D2, 318E, 318F, 320D2, 320D2 GC, 320E, 320E RR, 320F,323D2, 323E, 323F, 324E, 325F CR, 326D2, 326F, 329E, 330D2, 330F,335F CR, 336D2, 336D2 GC, 336D2 XE, 336E, 336E H, 336F, 336F XE, 340D2M315D, M316D, M316F, M317D2, M318D, M318F, M320D2, M320F, M322D,M322D2, M322F

W 317-5989 S325B HYDRAULIC SCRAP SHEAR 6,052 $127,001 NI......................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: Stick or Boom MountedREQUIRES: Boom mounting bracket and connecting lines

S325B MOUNTING BRACKETS

W 253-7830 BRACKET, MOUNTING CB 562 $3,738 NI..............................FOR USE WITH: S320B and S325 Stick MountedFOR USE WITH: CB Linkage

W 254-4463 BRACKET, MOUNTING DB 522 $3,738 NI..............................FOR USE WITH: S320B and S325 Stick MountedFOR USE WITH: DB-linkage

W 189-0311 BRACKET, MOUNTING 551 $3,738 NI.................................FOR USE WITH: S320B and S325 Stick MountedFOR USE WITH: Dedicated Coupler

W 344-1058 BRACKET, MOUNTING 850 $7,933 NI.................................FOR USE WITH: S325 Boom MounteddFOR USE WITH: 315DL Reach boom

W 291-1291 BRACKET, MOUNTING BOOM 884 $8,903 NI...........................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: S325 Boom MountedFOR USE WITH: 320D, 320E, 320D RR, 320E RR, 321D LCR

W 348-9541 BRACKET, MOUNTING 1,042 $7,935 NI...............................FOR USE WITH: S325 Boom MountedFOR USE WITH: M318D & M320F

S325B CONNECTING LINES

W 348-1103 LINES, CONNECTING 24 $1,700 NI...................................FOR USE WITH: S320B and S325 Stick MountedFOR USE WITH: 312DL, 312E, 314D CR, 314E CR, 315DL, 316EL, 318EL





13 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S325B CONNECTING LINES (Cont.)

W 341-2542 LINES, CONNECTOR 26 $1,700 NI...................................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: S325B

W 211-9059 LINES, CONNECTING 75 $1,472 NI...................................FOR USE WITH: S325B pinned on to the stick or with Dedicated Coupler

W 216-1733 LINES, CONNECTING 75 $1,472 NI...................................FOR USE WITH: S325B and Pin Grabber Coupler

W 343-7151 LINES, CONNECTING 26 $1,700 NI...................................FOR USE WITH: S325 Boom MountedFOR USE WITH: M318D One Piece / VA Boom

S3025 FLAT TOP SHEARFor Caterpillar machine models:316E, 316F, 318D2, 318E, 318F, 320, 320D2, 320D2 GC, 320E, 320E RR,320F, 323, 323D2, 323E, 323FM315D, M316D, M316F, M317D2, M318D, M318F, M320D2, M320F, M322D,M322D2, M322F

W 515-8530 S3025 HYDRAULIC SCRAP SHEAR 4,674 $98,306 NI......................LANE 1 WORK TOOLINCLUDES: Flat Top Mounting ConfigurationREQUIRES: Boom or Stick mounting bracket and connecting linesOPTIONAL: Blade Kit (567-8967)

S3025 BLADE KIT

W 567-8967 KIT, BLADE 88 $2,842 NI..........................................INCLUDES: Extra set of cutting knives, piercing tips and shim kitCAN ONLY BE ORDERED WITH SHEAR, LIMIT 1 PER SHEAR

S3025 MOUNTING BRACKETS

W 299-0293 BRACKET, MOUNTING B 448 $3,738 NI...............................LANE 1 WORK TOOLFOR USE WITH: B Linkage

W 565-2470 BRACKET, MOUNTING BOOM 686 $7,914 NI...........................LANE 1 WORK TOOLFOR USE WITH: 315/313/311F RR Boom





14 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S3025 CONNECTING LINES

W 562-6158 LINES, CONNECTING 57 $1,700 NI...................................LANE 1 WORK TOOLFOR USE WITH: 325FCR/323/320 Pin-On Coupler

W 565-1618 LINES, CONNECTING 62 $1,472 NI...................................FOR USE WITH: Pin Grabber or CW Coupler

W 527-5318 LINES, CONNECTING 35 $1,472 NI...................................FOR USE WITH: 315/313 Boom Mount

W 538-6352 LINES, CONNECTING 35 $1,472 NI...................................FOR USE WITH: 311F RR Boom Mount

S3050 ROTATING SHEARSPlease See GEJQ9341 for Shears MatchingFor Caterpillar machine models:326D2, 326F, 330D2, 330F, 335F CR, 336D2, 336D2 GC, 336D2 XE, 336F XE,336F, 340D2, 340F, 340F UHD, 349D2, 349E, 349F, 349F XE, 352F, 352F XE

W 426-2671 S3050 HYDRAULIC SCRAP SHEAR 11,201 $173,994 NI.....................FOR USE WITH: 324D, 324E, 326D2, 326F Reach BoomINCLUDES: Dedicated upper headREQUIRES: Connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1038 must be ordered with shear.

W 452-9108 S3050 HYDRAULIC SCRAP SHEAR 11,201 $173,994 NI.....................FOR USE WITH: 328D CR, 329D, 329E, 329F, 330D2, 330F,335F LCR Reach BoomINCLUDES: Dedicated upper headREQUIRES: Connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1038 must be ordered with shear.

W 501-1404 S3050 HYDRAULIC SCRAP SHEAR 11,243 $172,665 NI.....................FOR USE WITH: 324D, 324E, 326D2, 326F, 328D CR, 329D, 329E, 329F,330D2, 330F, 335F LCR, 336D, 336D2, 336E, 336F, 340D2,340F Reach / Mass BoomINCLUDES: Integrated upper headREQUIRES: Pin & bushing mounting group & connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1038 must be ordered with shear.





15 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S3050 ROTATING SHEARS (Cont.)

W 503-4430 S3050 HYDRAULIC SCRAP SHEAR 10,758 $165,053 NI.....................FOR USE WITH: 349E, 349F, 352F with TB-LinkageINCLUDES: Integrated upper headREQUIRES: Pin & bushing mounting group & connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1038 must be ordered with shear.

S3050 BLADE KIT

W 514-1038 KIT, BLADE 165 $3,829 NI.........................................INCLUDES: Extra set of cutting knives and piercing tipCAN ONLY BE ORDERED WITH SHEAR, LIMIT 1 PER SHEAR

S3050 MOUNTING BRACKETSPlease See GEJQ9341 for Boom Mounting Groups Matching

W 518-3134 MOUNTING GROUP, PIN & BUSHING 82 $1,328 NI........................FOR USE WITH: S3050 Shear 501-1404FOR USE WITH: 324D, 324E, 326D2, 326F Reach BoomINCLUDES: Machine cylinder pin

W 517-1316 MOUNTING GROUP, PIN & BUSHING 90 $1,328 NI........................FOR USE WITH: S3050 Shear 501-1404 or S2070 Shear 502-4993FOR USE WITH: 328D, 329E, 330F, 335F Reach BoomINCLUDES: Machine cylinder pin

W 517-4628 MOUNTING GROUP, PIN & BUSHING 79 $1,328 NI........................FOR USE WITH: S3050 Shear 501-1404 or S2070 Shear 502-4993FOR USE WITH: 328D, 329E, 330F, 335F Mass BoomINCLUDES: Machine cylinder pin


W 522-2422 MOUNTING GROUP, PIN & BUSHING 401 $6,171 NI.......................FOR USE WITH: S3050 Shear 503-4430FOR USE WITH: 349E, 349F, 352F with TB-LinkageINCLUDES: Machine cylinder pin





16 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S3050 CONNECTING LINESPlease See GEJQ9341 for Connecting Lines Matching

W 447-0213 LINES, CONNECTING 31 $1,858 NI...................................FOR USE WITH: S3050 Shear 426-2671, S3050 Shear 452-9108,S3050 Shear 501-1404FOR USE WITH: 324E, 326F, 328D, 329E, 330F, 335F Reach / Mass Boom

W 517-5789 LINES, CONNECTING 51 $1,858 NI...................................FOR USE WITH: S3050 Shear 513-8110, S3050 Shear 501-1404FOR USE WITH: 336D, 336E, 336F, 340F Reach / Mass Boom

W 513-9353 LINES, CONNECTING 76 $1,858 NI...................................FOR USE WITH: S3050 Shear 451-9968, S3050 Shear 503-4430FOR USE WITH: 349E, 349F, 352F with TB-Linkage

S3070 ROTATING SHEARSPlease See GEJQ9341 for Rotating Shears MatchingFor Caterpillar machine models:336D2, 336D2 XE, 336F, 336F XE, 340D2, 340F, 340F UHD, 349D2, 349F,349F XE, 352F, 352F XE, 374F, 390F

W 435-9356 S3070 HYDRAULIC SCRAP SHEAR 15,498 $236,444 NI.....................FOR USE WITH: 336D, 336D2, 336E, 336F, 340D2, 340F Reach BoomINCLUDES: Dedicated upper headREQUIRES: Connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1039 must be ordered with shear

W 508-5913 S3070 HYDRAULIC SCRAP SHEAR 15,829 $235,117 NI.....................FOR USE WITH: 336D, 336D2, 336E, 336F, 340D2, 340F, 336D, 336D2,336E, 336F, 340D2, 340F, 349E, 349F, 352F Reach / Mass BoomINCLUDES: Integrated upper headREQUIRES: Pin & bushing mounting group & connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1039 must be ordered with shear

W 501-0645 S3070 HYDRAULIC SCRAP SHEAR 15,194 $230,603 NI.....................FOR USE WITH: 374D, 374F with VB / WB Linkage, 390D,390F with HB / JC LinkageINCLUDES: Integrated upper headREQUIRES: Pin & bushing mounting group & connecting linesNOT FOR USE WITH: Center Lock CouplerREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1039 must be ordered with shearFor Pin on application only





17 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S3070 BLADE KIT


S3070 BOOM MOUNTING GROUPSPlease See GEJQ9341 for Boom Mounting Groups Matching

W 514-2553 MOUNTING GROUP, PIN & BUSHING 71 $1,328 NI........................FOR USE WITH: S3070 Shear 508-5913 or S2090 Shear 506-6983FOR USE WITH: 336D, 336D2, 336E, 336F, 340D2, 340F Reach BoomINCLUDES: Machine cylinder pin

W 506-6985 MOUNTING GROUP, PIN & BUSHING 77 $1,328 NI........................FOR USE WITH: S3070 Shear 508-5913 or S2090 Shear 506-6983FOR USE WITH: 345D, 349D, 349E, 349F, 352F Reach BoomINCLUDES: Machine cylinder pin

W 518-5057 MOUNTING GROUP, PIN & BUSHING 531 $8,431 NI.......................FOR USE WITH: S3070 Shear 501-0645FOR USE WITH: 374D, 374F with VB-LinkageINCLUDES: Machine cylinder pin

W 500-1829 MOUNTING GROUP, PIN & BUSHING 556 $8,431 NI.......................FOR USE WITH: S3070 Shear 501-0645FOR USE WITH: 390D, 390F with HB-LinkageINCLUDES: Machine cylinder pin


W 494-2975 LINES, CONNECTING 66 $1,858 NI...................................FOR USE WITH: S3070 Shear 435-9356, S3070 Shear 508-5913FOR USE WITH: 336D, 336E, 336F, 340F Reach / Mass Boom

W 505-3154 LINES, CONNECTING 73 $1,858 NI...................................FOR USE WITH: S3070 Shear 494-0637, S3070 Shear 508-5913FOR USE WITH: 345D, 349D, 349E, 349F, 352F Reach / Mass Boom

W 518-7938 LINES, CONNECTING 96 $1,858 NI...................................FOR USE WITH: S3070 Shear 501-0645FOR USE WITH: 374D, 374F with VB / WB Linkage, 390D,390F with HB / JC Linkage





18 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S3090 ROTATING SHEARSPlease See GEJQ9341 for Rotating Shears MatchingFor Caterpillar machine models:349D2, 349F, 349F XE, 352F, 352F XE, 374F, 390F

W 448-2630 S3090 HYDRAULIC SCRAP SHEAR 19,908 $284,164 NI.....................FOR USE WITH: 345D, 349D, 349D2, 349E, 349F, 352F Reach BoomINCLUDES: Dedicated upper headREQUIRES: Connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1040 must be ordered with shear

W 506-1005 S3090 HYDRAULIC SCRAP SHEAR 20,287 $282,836 NI.....................FOR USE WITH: 345D, 349D, 349D2, 349E, 349F, 352F, 374D,374F Reach / Mass BoomINCLUDES: Integrated upper headREQUIRES: Pin & bushing mounting group & connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1040 must be ordered with shear

W 509-9577 S3090 HYDRAULIC SCRAP SHEAR 19,396 $276,603 NI.....................FOR USE WITH: 390D, 390F with HB LinkageINCLUDES: Integrated upper headREQUIRES: Pin & bushing mounting group & connecting linesNOT FOR USE WITH: Center Lock CouplerREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1040 must be ordered with shearFor Pin on application only

S3090 BLADE KIT



W 518-1541 MOUNTING GROUP, PIN & BUSHING 86 $1,328 NI........................FOR USE WITH: S3090 Shear 506-1005FOR USE WITH: 345D, 349D, 349E, 349F, 352F Reach BoomINCLUDES: Machine cylinder pin

W 506-1008 MOUNTING GROUP, PIN & BUSHING 165 $2,408 NI.......................FOR USE WITH: S3090 Shear 506-1005FOR USE WITH: 374D, 374F Reach BoomINCLUDES: Machine cylinder pin





19 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S3090 BOOM MOUNTING GROUPS (Cont.)

W 509-9578 MOUNTING GROUP, PIN & BUSHING 633 $9,211 NI.......................FOR USE WITH: S3090 Shear 509-9577FOR USE WITH: 390D, 390F with HB-LinkageINCLUDES: Machine cylinder pin


W 495-0378 LINES, CONNECTING 77 $1,858 NI...................................FOR USE WITH: S3090 Shear 448-2630, S3090 Shear 506-1005FOR USE WITH: 345D, 349D, 349D2, 349E, 349F, 352F Reach / Mass Boom

W 518-8056 LINES, CONNECTING 71 $1,858 NI...................................FOR USE WITH: S3090 Shear 509-9577FOR USE WITH: 390D, 390F with HB Linkage

S2050 STRAIGHT (NON-ROTATING) SHEARSPlease See GEJQ9341 for Straight Shears Matching


W 426-3570 S2050 HYDRAULIC SCRAP SHEAR 9,206 $141,717 NI......................FOR USE WITH: 323D, 323D2, 323E, 323F, 325F LCR Reach / Mass BoomINCLUDES: Dedicated weld-on boom mount bracketREQUIRES: Connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1038 must be ordered with shear.For the 320GC please contact your WT Specialist for compatibility

W 504-4178 S2050 HYDRAULIC SCRAP SHEAR 9,325 $140,876 NI......................FOR USE WITH: 323D, 323D2, 323E, 323F, 325F LCR, 324D, 324E, 326D2,326F Reach / Mass BoomINCLUDES: Weld-on boom mount bracketREQUIRES: Pin & bushing mounting group & connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1038 must be ordered with shear.For the 320GC please contact your WT Specialist for compatibility

S2050 BLADE KIT






20 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)


W 517-4673 MOUNTING GROUP, PIN & BUSHING 57 $840 NI........................FOR USE WITH: S2050 Shear 504-4178FOR USE WITH: 323D, 323D2, 323E, 323F, 325F LCR Reach or Mass BoomINCLUDES: Machine cylinder pin


W 505-1203 LINES, CONNECTING 46 $1,510 NI...................................FOR USE WITH: S2050 Shear 426-3570, S2050 Shear 504-4178FOR USE WITH: 323D, 323D2, 323E, 323F, 325F LCR, 324D, 324E, 326D2,326F Reach / Mass Boom


W 435-9355 S2070 HYDRAULIC SCRAP SHEAR 12,743 $197,176 NI.....................FOR USE WITH: 328D CR, 329D, 329E, 330D2, 330F, 335F LCR Reach BoomINCLUDES: Dedicated weld-on boom mount bracketREQUIRES: Connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1039 must be ordered with shear

W 502-4993 S2070 HYDRAULIC SCRAP SHEAR 12,787 $195,847 NI.....................FOR USE WITH: 328D CR, 329D, 329E, 329F, 330D2, 330F, 335F LCR, 336D,336D2, 336E, 336F, 340D2, 340F Reach / Mass BoomINCLUDES: Weld-on boom mount bracketREQUIRES: Pin & bushing mounting group & connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1039 must be ordered with shear

S2070 BLADE KIT








21 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)

S2070 BOOM MOUNTING GROUPS (Cont.)

W 517-4628 MOUNTING GROUP, PIN & BUSHING 79 $1,328 NI........................FOR USE WITH: S3050 Shear 501-1404 or S2070 Shear 502-4993FOR USE WITH: 328D, 329E, 330F, 335F Mass BoomINCLUDES: Machine cylinder pin



W 481-7985 LINES, CONNECTING 53 $1,510 NI...................................FOR USE WITH: S2070 Shear 435-9355, S2070 Shear 502-4993FOR USE WITH: 328D CR, 329D, 329E, 330D2, 330F,335F LCR Reach / Mass Boom


W 447-3943 S2090 HYDRAULIC SCRAP SHEAR 16,535 $274,069 NI.....................FOR USE WITH: 336D, 336D2, 336E, 336F, 340D2, 340F Reach BoomINCLUDES: Dedicated weld-on boom mount bracketREQUIRES: Connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1040 must be ordered with shear

W 506-6983 S2090 HYDRAULIC SCRAP SHEAR 16,601 $272,742 NI.....................FOR USE WITH: 336D, 336D2, 336E, 336F, 340D2, 340F, 345D, 349D,INCLUDES: Weld-on boom mount bracketREQUIRES: Pin & bushing mounting group & connecting linesREQUIRES: Extra set of cutting knives & piercing tip at no cost,blade kit 514-1040 must be ordered with shear

S2090 BLADE KIT






22 Bid Term: 2/20/19 - 2/19/21


WT-HM


SHEARS (CONT.)


W 514-2553 MOUNTING GROUP, PIN & BUSHING 71 $1,328 NI........................FOR USE WITH: S3070 Shear 508-5913 or S2090 Shear 506-6983FOR USE WITH: 336D, 336D2, 336E, 336F, 340D2, 340F Reach BoomINCLUDES: Machine cylinder pin

W 506-6985 MOUNTING GROUP, PIN & BUSHING 77 $1,328 NI........................FOR USE WITH: S3070 Shear 508-5913 or S2090 Shear 506-6983FOR USE WITH: 345D, 349D, 349E, 349F, 352F Reach BoomINCLUDES: Machine cylinder pin


W 491-0986 LINES, CONNECTING 49 $1,510 NI...................................FOR USE WITH: S2090 Shear 447-3943, S2090 Shear 506-6983FOR USE WITH: 336D, 336D2, 336E, 336F, 340D2, 340F Reach / Mass Boom

DEMOLITION AND SORTING GRAPPLES

GRAPPLES, MULTI PURPOSE G300B

W 367-7524 GRAPPLE G310B-D 2,337 $29,508 NI..................................LANE 1 - AVAILABLE FOR ADSDG310B Grapple with Demolition ShellsREQUIRES: Mounting bracket and connecting linesFOR USE WITH: 311F, 312D2, 312E, 313D2, 313D2 LGP, 313F GC, 314E CR,314F, 315F CR, 316E, 316F, 318D2M313D, M314F, M315D, M315D2, M315F, M316D, M316F, M317D2, M317F, M318F

W 367-7531 GRAPPLE, G315B-D 2,888 $35,515 NI.................................LANE 1 - AVAILABLE FOR ADSDG315B Grapple with Demolition ShellsREQUIRES: Mounting bracket and connecting linesFOR USE WITH: 318E, 318F, 320GC, 320D2, 320D2 GC, 320E, 320E RR, 320F,323D2, 323E, 323F, 325F CRM315D, M316D, M316F, M317D2, M318D, M318F, M320D2, M320F, M322D,M322D2, M322FFor the 320GC please contact your WT Specialist for compatibility

W 519-7784 GRAPPLE, G320B-D 3,940 $42,821 NI.................................LANE 1 - AVAILABLE FOR EAME REGIONG320B Grapple with Demolition ShellsREQUIRES: Mounting bracket and connecting linesFOR USE WITH: 323D2, 323E, 323F, 323 NGH, 324E, 326D2, 326F,329E, 330D2, 330F, 335F CR





23 Bid Term: 2/20/19 - 2/19/21


WT-HM


DEMOLITION AND SORTING GRAPPLES (CONT.)

GRAPPLES, MULTI PURPOSE G300B (Cont.)

W 522-5887 GRAPPLE, G325B-D 4,570 $47,238 NI.................................LANE 1 - AVAILABLE FOR ADSDG325B Grapple with Demolition ShellsREQUIRES: Mounting bracket and connecting linesFOR USE WITH: 324E, 326D2, 326F, 329E, 330D2, 330F, 335F CR, 336D2,336D2 GC, 336D2 XE, 336E, 336E H, 336F, 336F XE, 340F, 340F UHD

W 483-5304 GRAPPLE, G330 6,080 $59,232 NI...................................LANE 1 - AVAILABLE FOR ADSD REGIONG330B Grapple with Demolition ShellsREQUIRES: Mounting bracket and connecting linesFOR USE WITH: 329E, 330D2, 336D2, 336D2 XE, 336E, 336E H, 336F, 336F X340D2, 340F, 340F UHD, 349D2, 349E, 349F, 349F XE, 352F, 352F XE

G300B MOUNTING BRACKETS

W 298-7706 BRACKET, MOUNTING STICK 311 $3,738 NI............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: G310 GC, G313 GCFOR USE WITH: Cat. 312, A-Linkage

W 169-4967 BRACKET, MOUNTING STICK 350 $3,738 NI............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: G310B and G315BFOR USE WITH: Cat. 315, 316 Linkage

W 299-0293 BRACKET, MOUNTING B 448 $3,738 NI...............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: B Linkage

W 253-7830 BRACKET, MOUNTING CB 562 $3,738 NI..............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: G320B and G325BFOR USE WITH: CB Linkage

W 254-4463 BRACKET, MOUNTING DB 522 $3,738 NI..............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: G320B and G325BFOR USE WITH: DB Linkage

W 254-4039 BRACKET, MOUNTING DB 642 $5,179 NI..............................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: G330FOR USE WITH: DB Linkage





24 Bid Term: 2/20/19 - 2/19/21


WT-HM


DEMOLITION AND SORTING GRAPPLES (CONT.)

G300B MOUNTING BRACKETS (Cont.)

W 255-0001 BRACKET, MOUNTING TB 758 $5,179 NI..............................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: G330FOR USE WITH: TB Linkage

W 276-7982 BRACKET, MOUNTING UB 1,164 $5,179 NI............................FOR USE WITH: G330FOR USE WITH: UB Linkage

W 298-7706 BRACKET, MOUNTING STICK 311 $3,738 NI............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: G310 GC, G313 GCFOR USE WITH: Cat. 312, A-Linkage

W 169-4967 BRACKET, MOUNTING STICK 350 $3,738 NI............................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: Cat. 315, 316 Linkage

W 397-3964 BRACKET, MOUNTING 350 $3,925.................................FOR USE WITH: G315 GCFOR USE WITH: M318 Linkage

G300B CONNECTING LINES

W 379-4498 LINES, CONNECTING 55 $1,472 NI...................................Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & ServicesFOR USE WITH: G310B and G315BFOR USE WITH: Cat. 312, A-Linkage, Cat. 315, 316 Linkage

W 244-3141 LINES, CONNECTING 55 $1,429 NI...................................LANE 1 - AVAILABLE FOR EAME REGIONFOR USE WH: M313D/M314F/M315D/M316F/M316D/M318FFOR USE WITH: G310B and G315B grapple

W 244-3143 LINES, CONNECTING 55 $1,472 NI...................................LANE 1 WORK TOOLFOR USE WITH: G315B grappleFOR USE WITH: B Linkage

W 244-3144 LINES, CONNECTING 55 $1,474 NI...................................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: G320B, G325BFOR USE WITH: B, CB and DB Linkage

W 244-3135 LINES, CONNECTING 67 $2,222 NI...................................FOR USE WITH: G330FOR USE WITH: DB and TB Linkag





25 Bid Term: 2/20/19 - 2/19/21


WT-HM


ORANGE PEEL GRAPPLES

To have an operational grapple you will need:1) Grapple2) Crosshead3) Connecting lines

Tool carrying machines require these hydraulic functions to operate:1) Double or combined function (Open/Close)2) Medium pressure auxiliary hydraulic circuit (Rotate)3) High pressure boom and stick auxiliary lines (Open/Close)4) Medium pressure boom and stick line (Rotate)5) Hand control or foot valve to operate open/close, rotate

Matches are dependent upon excavator configurations. Please consultOrange Peel Grapples Reference Guide GEJQ9337 and/orthe Work Tool Matching Guide.

GRAPPLES, ORANGE PEEL GSH420 AND GSH520For Caterpillar machine models:MH3022, MH3024, MH3026

W 490-6896 GRAPPLE, OPG GSH420 .65YD3 2,533 $31,599 NI.......................4 tine, semi-open, .65YD3REQUIRES: Crosshead and connecting lines

W 490-6897 GRAPPLE, OPG GSH420 0.75YD3 2,573 $33,261 NI......................4 tine, semi-open, .75YD3REQUIRES: Crosshead and connecting lines

W 490-6898 GRAPPLE, GSH420 1.00YD3 2,648 $34,925 NI..........................4 tine, semi-open, 1.00YD3REQUIRES: Crosshead and connecting lines

W 490-6901 GRAPPLE, GSH520 .75YD3 3,073 $36,847 NI...........................5 tine, semi-open, .75YD3REQUIRES: Crosshead and connecting lines

W 490-6902 GRAPPLE, GSH520 1.00YD3 3,166 $38,689 NI..........................5 tine, semi-open, 1.00YD3REQUIRES: Crosshead and connecting lines





26 Bid Term: 2/20/19 - 2/19/21


WT-HM


ORANGE PEEL GRAPPLES (CONT.)

GRAPPLES, ORANGE PEEL GSH425 AND GSH525For Caterpillar machine models:320D2, 320E, 320E RR, 320F, 323D2, 323E, 323F, 324E, 325F CR, 326D2,326F, 329E, 330D2, 330F, 335F CRM318D, M320D2, M320F, M322D, M322D2, M322F

W 466-8410 GRAPPLE, OPG GSH425 1.00YD3 3,351 $36,446 NI......................LANE 1 - AVAILABLE FOR ADSD REGION4 tines, semi-closed, 1.00YD3REQUIRES: Crosshead and connecting lines



W 473-7062 GRAPPLE, OPG GSH525 1.00YD3 4,414 $42,019 NI......................LANE 1 - AVAILABLE FOR ADSD REGION5 tines, closed, 1.00YD3REQUIRES: Crosshead and connecting lines


W 473-7063 GRAPPLE, OPG GSH525 1.25YD3 4,590 $45,097 NI......................LANE 1 - AVAILABLE FOR ADSD REGION5 tines, closed, 1.25YD3REQUIRES: Crosshead and connecting lines

GRAPPLES, ORANGE PEEL GSH440For Caterpillar machine models: MH3049

W 456-2267 GRAPPLE, OPG GSH440 1.5YD3 4,663 $41,571 NI.......................4 tines, semi-open, 1.50YD3REQUIRES: Crosshead and connecting lines

W 469-1368 GRAPPLE, OPG GSH440 2.0YD3 4,652 $42,858 NI.......................4 tines, semi-open, 2.00YD3REQUIRES: Crosshead and connecting lines

GRAPPLES, ORANGE PEEL GSH22BFor Caterpillar machine models: 324E, 329E, 336D2, 336D2 GC, 336D2 XE,336E, 336E H, 336F XE, 340D2, 340F

W 259-9691 GRAPPLE, OPG GSH22B-H-4-1.5YD3 5,666 $47,124 NI....................LANE 1 - AVAILABLE FOR ADSD REGION4 tines, semi-closed, 1.50YD3REQUIRES: Crosshead and connecting lines





27 Bid Term: 2/20/19 - 2/19/21


WT-HM



GRAPPLES, ORANGE PEEL GSH22B (Cont.)



BRACKETS FOR GSH GRAPPLES

W 305-7364 BRACKET, CROSSHEAD 366 $2,833 NI................................LANE 1 WORK TOOLFOR USE WITH: GSH22B

W 392-0684 BRACKET, CROSSHEAD 348 $3,128 NI................................FOR USE WITH: GSH22BFOR USE WITH: MH3037, MH3049, MH3059

W 469-3644 BRACKET, CROSSHEAD 256 $3,183 NI................................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: GSH425, GSH525FOR USE WITH: B Linkage, M318D, M322D, M320D2, M322D2, M320F, M322F,M318D MH, M322D MH, M325D MH, M325D LMH, M322D2 MH, M324D2 MH,MH3022, MH3024Not for use on 320GC

W 469-3643 BRACKET, CROSSHEAD 240 $1,318 NI................................LANE 1 - AVAILABLE FOR EAME REGIONFOR USE WITH: GSH425, GSH525FOR USE WITH: 325D MH, 330D MH, M325D MH, M325D LMH

W 469-3647 BRACKET, CROSSHEAD 216 $2,432 NI................................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: GSH425, GSH525FOR USE WITH: MH3027, MH3037

W 392-0698 BRACKET, CROSSHEAD 370 $3,128 NI................................LANE 1 - AVAILABLE FOR ADSD REGIONFOR USE WITH: GSH22BFOR USE WITH: MH3059INCLUDES: Magnet Sleeve and machine stick pin

W 509-6502 BRACKET, CROSSHEAD 201 $1,317 NI................................FOR USE WITH: GSH420, GSH520FOR USE WITH: MH3022, MH3024, MH3026

W 478-6924 PIN, GRAPPLE BRACKET 51 $506 NI................................FOR USE WITH: Bracket 469-3647Stick PinFOR USE WITH: MH3027, MH3037, MH3049, MH3059REQUIRES: Machine stick pin 478-6924 (unless machine isalready equipped)





28 Bid Term: 2/20/19 - 2/19/21


WT-HM



CONNECTING LINES FOR GSH GRAPPLES

W 297-7876 LINES, CONNECTING 35 $1,275 NI...................................LANE 1 - AVAILABLE FOR EAME REGIONFOR USE WITH: 325D MH and GSH425/525 or GSH22B

W 297-7877 LINES, CONNECTING 44 $1,033 NI...................................LANE 1 WORK TOOLFOR USE WITH: M325D MH/LMH and HSH425/525 or HSD22B

W 394-6065 LINES, CONNECTING 19 $1,303 NI...................................LANE 1 - AVAILABLE FOR ADSDFOR USE WITH: MH3037 or MH3049 and GSH425/525 or GSH440

MH3059 and GSH22BW 540-6704 LINES, CONNECTING 42 $928 NI...................................

FOR USE WITH: GSH420, GSH520

CONTACT CAT WORK TOOLS FOR M322D AND M322F CONNECTOR LINE AVAILABILITY

ORANGE PEEL GRAPPLES COMPETITIVE MACHINE CROSSHEADS

When installing a Cat grapple to a competitive carrier materialweights, machine configuration, lift charts and hydraulicspecifications must be reviewed to determine proper match.Crossheads do not include machine stick pin or magnet sleeve.Please contact Cat Work Tools for more information.

Competitive Mounting Brackets

W 473-0296 BRACKET, GRAPPLE MB-HR15 (NC) 176 $2,524 NI.......................FOR USE WITH: GSH425/525 and Sennebogen 830 / 835FOR USE WITH: GSH440 and Sennebogen 840

W 473-0271 BRACKET, GRAPPLE MB-HR15 (NC) 168 $2,524 NI.......................FOR USE WITH: GSH425/525 and Liebherr LM35 / 924CHD / 934CFOR USE WITH: GSH440 and Liebherr 934HD / 944

W 452-6399 BRACKET, CROSSHEAD 323 $2,833 NI................................FOR USE WITH: GSH22B and Sennebogen 850





29 Bid Term: 2/20/19 - 2/19/21


WT-HM

REF Ship Weight NetUSE NO. lbs PriceCATERPILLAR WORK TOOLS

PACKING

PACKING

0P-0210 PACK, DOMESTIC TRUCK 0 NC................................FOR USE WITH: ALL WORK TOOLS

W 0G-0007 CWTS CUSTOM PRODUCT ACC QUOTE 0 NC NI......................Can only be used for ETO orders.Please use the "NOTES" screen when ordering to mention the quotenumber and to specify the required product(s) as mentioned inthe quote.





30 Bid Term: 2/20/19 - 2/19/21

the educational services commission of new jersey grounds ...w 253-7830 bracket, mounting cb........

Documents