the difference between luts, looks and scene files
DESCRIPTION
video hd itu 709TRANSCRIPT
With more and more cameras shooting in flat-looking Log modes or RAW, the topic of LUTs onset and their implications in post have become big points of discussion. At the same time, there are
many cameras that utilize the more traditional Scene Files for control of color and contrast.Furthermore, there are cameras like the ARRI ALEXA and RED EPIC that offer their own
unique types of image control. With all these different formats, the difference between LUTs,
Looks and Scene Files can be confusing, so in this article I explain the terms and discuss howthese files are applied.
Scene Files, Picture Profiles and Custom Looks
Most traditional HD cameras shoot standard HD (Rec. 709) video, which produces video thatcould air on television without any post-production color grading. We often call these types of
cameras “broadcast cameras” for this reason. Professional HD cameras allow you to push beyondthe limits of standard HD to get more dynamic range, but they still generally conform to the HD
standards. Most of these cameras allow you some amount of adjustability over the image,including color, contrast and detail adjustment. We generally call these settings Scene Files, which
is what Panasonic calls them, but they’re also called Picture Profiles (Sony EX cameras) and
Custom Profiles (Canon XF cameras). These settings can offer a wide variety of adjustments to
the camera, including gamma adjustments, color saturation, color matrix adjustments and detailenhancement settings. Settings are created in the camera, and generally they only work with a
specific piece of hardware—a particular camera model. We call them files, and not just settings,because you’re often able to save the settings onto a memory card to share between cameras of
the same model. Because these cameras all shoot traditional video, any adjustments made in-camera are “baked” into the recorded image. So what you see in-camera is what you get in post.
These same adjustments can be achieved with external remote-control units, also called “paint
boxes.” Because these files are camera-specific and bake their look into the recorded video, aScene File is distinctively different from the concept of a LUT.
A Panasonic Scene File in which settings are created in the camera, but conform to standard Rec.
709 color space.
What’s a LUT?
LUT is an acronym for lookup table, which in computer science is a data structure used to replace
a computation. In other words, a lookup table is a defined set of data that’s used instead of
actually doing much processing. In the video world, a lookup table does much the same thing; it’sa set of data offsets that, when applied to an image, will alter it in some way. If I have a flat Log C
image and I want to get something like a standard HD Rec. 709 image, I can apply this offset,which will do that adjustment for me. I could do this by eye every time, but with a LUT it can be
done quickly and accurately. LUTs come in various forms and with various intentions, which onlyadds to the confusion. First, let’s talk about the forms of LUTs that are out there today.
1D LUTs do the work of modifying an image, but with fairly limited adjustment possibilities. A 1DLUT is composed of three different data mappings: one for red, one for blue and one for green.
Each color is treated separately, so a change in red wouldn’t affect a blue value, for example. This
limits complex color correction overall, but a 1D LUT can be very useful in many situations.
New York
Sony Pro Moni-Tour – Los Angeles
Digital Technician: On Set LUT Creation 101- 1D
& 3D LUTs – Los Angeles
Phantom Flex/Miro/4K Intensive Training – NewYork
Topics
Digital Cinema High-Speed
Film Optics
Broadcast & Production Apps & Software
Product News Profiles
Audio Workflow
Accessories & Support Lighting
Archiving & Asset Mgmt
Related Posts
A Closer Look: ALEXA XT & Its Workflow
Go Anamorphic with the Arri ALEXA Plus 4:3
ARRI ALEXA Camera Lineup
Post-NAB Equipment Roadmap
Raw, Log and Uncompressed Explained
Related Products
+ Camera Accessories
+ Cameras
+ Test Charts
CineTechnica - Latest Posts
From ‘Jesse’s Box’ to PCU2: The Evolution of a
Phantom Control Unit
Canon LUTs for the C100, C300 and C500
Arri’s Photometrics App is a Pocket-Sized LightingResource
C300 Quick Tip: Assigning a Custom WhiteBalance Button
DP Morgan Schmidt Takes the Flex4K to NYC for
Samsung
3D LUTs are more complex and are based on a three-dimensional cube. This cube maps all
colors together and gives much greater adjustment potential. However, where a 1D LUT usually
maps an output value for every input value, a 3D LUT with the same mapping would be toocomplex. So a 3D LUT is created with a number of input and output points, usually 17, and any
value outside of those points is interpolated.
Besides these two varieties, LUTs can be created for different purposes.
A Calibration LUT, sometimes called a Display or Monitor LUT, isn’t designed to create a look,
but instead to make an image “correct.” Let’s say you’re on set and have three different monitors,and they all look a little bit different. We could create a LUT that makes each of these displays
adhere to the standard HD Rec. 709 spec, or at least to match each other. This could also bedone by adjusting each monitor with its own controls, but given that not all monitors are equally
adjustable, using a LUT may be preferred. For digital cinema projection, a Calibration LUT is
used to make a digital projection have the same look as a film projection. Software and probesare used to create these types of LUTs. So in simple terms, these Calibration LUTs are designed
to make different displays match well.
A Viewing LUT is what people are most often talking about when describing LUTs. They’re
designed to make a camera’s output look good during shooting. They may be as simple asconverting a flat S-Log or Log C feed into a normal-looking Rec. 709 image, while others also
will include some aesthetic choices. A Digital Imagining Technician on set often will create aViewing LUT for the DP to look at. These LUTs are then sent to post-production to create dailies
and to give the colorist a starting point for the final grade. A Viewing LUT is usually a 3D LUTbecause it gives the most possible adjustment.
The American Society of Cinematographers (ASC) saw that there was a huge variety of LUTformats out there, which created a lot of problems between on-set tools and postproduction. So
they came up with a standard they call an ASC Color Decision List (CDL). This is a 3D LUT witha relatively simple format. Most color-grading software applications can load an ASC CDL file,
and many on-set tools can work with these files, so the ASC CDL offers the clearest solution forworking with LUTs on set and in post.
Okay, so you have a LUT. Now, how is it applied? Usually, a piece of hardware, often called aLUT Box, is used in between the camera and a monitor. A piece of hardware, like the Cine-tal
Davio, Blackmagic Design HDLink Pro or Pandora Pluto, is used to process the incoming imageand apply the LUT to the output. Software like cineSpace from THX and Light Illusion
LightSpace CMS can be used to combine Calibration LUTs and Viewing LUTs, which can be atricky process. To learn more about this process and about LUTs in general, check out Light
Illusion’s website, www.lightillusion.com.
What’s a Look?
RED and ARRI both enable recording in a RAW format, with no baked-in color adjustment.ARRI also has a Log C shooting mode, which is a very flat, wide-gamut video output. Both
cameras have the ability to load in special files, which I call Looks, that essentially function asLUTs. The difference between a Look and a LUT is that these Look Files only can be used in-
camera. RED’s files are made through their RedCine-X software, and ARRI has a Look
Generator. With these tools, a Look can be generated and loaded into the camera. The cameras
then can apply the adjustments to their outputs for monitoring. Basically, the Look works like aLUT, but is built just for a specific camera and doesn’t require any external hardware. This type of
adjustment then travels through metadata of the recorded clips and can be applied very easilythrough the right post tools. ARRI also allows you to convert their Look Files into actual LUTs for
post, which can be done through their online LUT Generator. The Sony F65 camera will be ableto do the same thing in the future with ASC CDL files working as the Look. So the difference
between a LUT and a Look is subtle, but because the files are camera-specific, there’s a
difference.
___
This resource is based on an article written by Andy Shipsides for HDVideoPro Magazine.
New York 888.223.1599 • Chicago 877.880.4267 • Los Angeles 888.700.4416 © 1989-2013 AbelCine