the cabinet · pdf filemoulding designs, while commonly ... the cabinet authority ... the top...

11.1Custom Products | Fall 2017

Specialty Products

11

Custom Valances - Special Designs

Conestoga offers a wide variety of arched panel configurations and options. Valances illustrated on the following pages represent popular custom arched panel designs. The manufacturing of custom valances is based off of customer-supplied dimensioned drawings. If any of the following illustrations below match the look you desire, please copy the appropriate page, designate needed dimensions and forward it to Customer Service.

• Arched panel valances are available in most mortise and tenon and miter designs. Applied moulding designs, while commonly available, depend on the radius of the panel. Cornwall, Cotswald, Newbury and Monaco designs are not available.

• Design options include, but are not limited to all published panel raises and framing beads, edge profiles, grooved panels, wide framing, and custom rise dimensions.

• A CAD drawing will be created prior to the manufacturing of any custom arched panel. After a review and sign off by the customer, the drawing must be returned to Special Designs in order for production to begin. Lead-time calculations will not begin until Conestoga has received an approved drawing.

• Framing widths will match door style selected unless otherwise noted by customer.

• Please provide appropriate sizes when ordering.

C

B

A

Design Option A

Design Option C

Design Option B

C

B

A

C

B

A

D

SizesA

B

C

Grain DirectionVertical Horizontal

SizesA

B

C


SizesA

B

C

D


11.2 Custom Products | Fall 2017

Spec

ialty

Pro

duct

s

11

Custom Valances - Special Designs (continued)

C

B

A

C

B

A

C

B

A

C

B

A

D

C

B

A

D

Design Option D

Design Option F

Design Option G (applied moulding)

Design Option H (available with or without applied moulding)

Design Option E (horizontal grain only)

SizesA

B

C


SizesA

B

C


SizesA

B

C

D


SizesA

B

C

D


SizesA

B

C

Horizontal grain direction only.


Specialty Products

11

Standard Arched Valances

Arched ValanceValances 30" to 48".

Valances 51" to 72".

• Standard Arched Raised Panel Valances are available only in three inch wide increments from 30" to 72".

• Minimum size – 30" wide x 12-1/2" high. Maximum size – 72" wide x 30" high. Framing widths: 2-3/4" stiles, 2-5/16" rails, 2-1/2" upright mid-rail. The rise is always 4-1/2", regardless of valance width.

• Horizontal grain panels are standard, vertical grain is available with an upcharge.

• Design standard as shown. Individual designs, including applied moulding, must be ordered through Special Designs.

4-1/2"

Offering And Availability

SpeciesMaterial Pricing Guide All 3/4" and 1" species available except rustic knotty.

Edge Profilespg 7.1 Machine Edge only.

Framing Beadspg 7.2 All 3/4" and 1" available.

Panel Raisespg 7.2 All 3/4" and 1" available.

Optionspgs 7.3-7.14 Available with pegs, distressing, cross grain sanding, wear sanding, putty pin holes,

weathered grain and cut down in width only.


Spec

ialty

Pro

duct

s

11 Classic ArchValances 21" to 60"

Valances 60-1/16" to 96"

Traditional ArchValances 16" to 60"


Standard 1-piece Valances

• Valances are available in a 6" height only.

• Valance pricing is determined using design plus material calculations. See the drawings below to determine appropriate design charge. Calculate overall square footage of valances and refer to category B of the specie desired in the Material Pricing Guide to determine material charge.

Edge Profile Options• Straight valance comes standard with Machine Edge, but is available with any edge profile.

Specify which sides receive an edge profile, other than Machine Edge.

• Roman Arch valance and Traditional Arch valance come standard with Machine Edge. These valances are available with edge profiles: B-2, C-2, CFP-2, E-2, H-2, J-2, L-059, L-120, L-149, L-281, L-382, L-772, L-803, L-1160, LC-2, PRS-2, RC-2 and V-2. Specify which sides receive profiles other than Machine Edge.

• Classic Arch valance and Elegant Arch valance are only available with a Machine Edge.

• See matrix on next page to determine pattern related dimensions.

StraightValances 12" to 60"


Elegant ArchValances 21" to 60"


Roman Arch Valances 12" to 60"



Specialty Products

11

Valance Matrix InstructionsUse the matrix below to determine the specifications for patterned valances. Find the desired valance length in one of the C rows. The top number (white numbers in black) in the column with the desired length is the pattern length. The pattern will be centered on the valance.

From the C block containing the desired overall valance length, the extreme right number in that row, which is under column B is the size of the flat areas on the left and right side of the pattern.

Example: If ordering a Traditional Arch valance with an overall length of 30" (dimension C), note that:

• 30" appears in the sixth C row, fourth column of the matrix.

• Referring to the top of the column, in row A, a pattern length of 19" will be found.

• Referring back to the 30" C row, at the right end of the row, in column B, flat areas of 5-1/2" on both the left and right ends of the valance will be found.

• The selected 30" valance will have a pattern 19" wide, centered on the valance, with 5-1/2" wide flat areas at both ends of the valance.

Classic ArchB BA

6"

C

2-1/2"

Elegant ArchB BA

6"

C

3"

Roman ArchB BA

6"

3"

C

Traditional ArchB BA

6"

C

3"

Standard 1-piece Valances (continued)

Valance Matrix

A* 9" 11" 14" 19" 24" 30" 42" 54" 66" 78" B

C 15" 17" 3"

C 16" 18" 21" 26" 31" 37" 49" 61" 73" 85" 3-1/2"

C 19" 22" 27" 32" 38" 50" 62" 74" 86" 4"

C 20" 23" 28" 33" 39" 51" 63" 75" 87" 4-1/2"

C 24" 29" 34" 40" 52" 64" 76" 88" 5"

C 25" 30" 35" 41" 53" 65" 77" 89" 5-1/2"

C 36" 42" 54" 66" 78" 90" 6"

C 43" 55" 67" 79" 91" 6-1/2"

C 44" 56" 68" 80" 92" 7"

C 45" 57" 69" 81" 93" 7-1/2"

C 46" 58" 70" 82" 94" 8"

C 47" 59" 71" 83" 95" 8-1/2"

C 48" 60" 72" 84" 96" 9"

*Note: Any increment 1/2" or less round down to nearest measurement in row “A”. Any increment 9/16" or greater round up to nearest measurement in row “A”.


Spec

ialty

Pro

duct

s

11

Slab Fillers

• Slab fillers can be ordered in widths from 1-1/2" to 48" and heights from 4-1/2" to 96". Available in all 3/4" and 1" species.

• All 3/4" and 1" edge profiles are available.

• Slab fillers are available with pegs, radius corners, grooves, face-routed and back-routed hand pulls, distressing, wear sanding and weathered grain.

Slab Filler

Glass Shelves

• Used in conjunction with a frame only door or with a wire grille insert.

• Allows light to flow through the entire cabinet, accentuating fine dinnerware, glassware or other collectibles.

• All 3/4" and 1" species available.

• Maximum size – 23-15/16" deep x 36" long.

• Edge profiles – defaults to machine edge on all 4 edges. Additional edge profiles include B-2, C-2, CFP-2, H-2, J-2, L-034, L-059, L-149, L-382, L-803, L-1160, LC-2 and PRS-2.

• Two framed options accept either 1/8" or 1/4" glass (glass not included).1/8" depth 1/4" depth

Grafton8" x 12"

2" Framing


Specialty Products

11

Fluted Fillers

• Fluted fillers can be ordered in custom widths from 3" to 15-15/16" and heights up to 96" in all standard species.

• Choose from either Tapered or Rounded flutes. If not specified, flutes will be produced using the Tapered design.

• Non-fluted or “flat” areas are design specific, but can be customized to meet your design needs. Simply specify the flat dimensions desired. Specify “Flats to measure 0” to extend flutes the entire length of filler.

• Fluted filler pricing is determined using design plus material calculations. See the chart below to determine appropriate design charge. Calculate overall square footage of filler and refer to category B of the specie desired in the Material Pricing Guide to determine material charge.

• The number of flutes per filler width is indicated in the chart below. Custom flute spacing is available through Special Designs.

Rounded Flute

Tapered Flute

Edge Profile Options

• Fluted fillers come standard with a Machine Edge, but can be ordered with a variety of edge profiles including B-2, C-2, LC-2, L-034, L-059, L-149, L-253, L-382, L-686, L-1160, PRS-2, RC-2 and V-2.

• Beveled edge profile selections include the L-991 (45 degree back bevel) and the L-423 (22-1/2 degree back bevel).

• Premium edge profiles include the L-297, L-304 and LC-Inset edge. Upcharge applies.

2"

2" 2"6" 6"

2" 2" 2"

Section view

Fluted Filler Pricing

Filler Width # FlutesUnder 60" in length

60" or greater in length

3" to 3-15/16" 3

4" to 4-15/16" 4

5" to 5-15/16" 5

6" to 6-15/16" 6

7" to 7-15/16" 7

8" to 8-15/16" 9

9" to 9-15/16" 10

10" to 10-15/16" 11

11" to 11-15/16" 12

12" to 12-15/16" 14

13" to 13-15/16" 15

14" to 14-15/16" 16

15" to 15-15/16" 17

Wall Base/Tall

variable

3/4"

7/16"

3/8"


Spec

ialty

Pro

duct

s

11

3" and 6" Fluted Fillers with Rosette

• Fluted fillers with rosettes can be ordered in a tapered or rounded flute design. Flutes will be manufactured as “tapered flute” unless otherwise specified.

• Fluted filler with rosette pricing is determined using design plus material calculations. See the chart below to determine appropriate design charge. Calculate overall square footage of filler and refer to category B of the specie desired in the Material Pricing Guide to determine material charge.

• Top margin on rosette filler is design specific, custom margins are available through Special Designs.

• Rosettes may be added to the bottom of these fillers for an additional charge. The position of the bottom rosette will mirror the placement of the top rosette.

• Standard measurements for Wall and Base/Tall fluted fillers are identical with the exception of the length of the unfluted area on the bottom. Wall fillers are manufactured with a 2" unfluted area, Base/Tall fillers are manufactured with a 6" unfluted area.

• Flat dimensions (length of unfluted area) at ends of fillers are design specific. Specify custom flat dimensions if desired. Specify “Flats to measure 0” to order flutes extending the entire length of the filler on the bottom only. Top flat may not measure less than 3-3/8".

Section view of rosette Section viewTypical for all 6" wide fillers

Section viewTypical for all 3" wide fillers

Contact Special Designs for fluted filler with rosettes measuring over 96" in length.

2-1/4"

1-1/4"

6"(Base/Tall)

4-1/8"

2"(Wall)

1-1/4"

6"(Base/Tall)

2-1/4"

6"3"

1-1/4"

2-15/16"3-1/2"

4-1/8"2-1/4"

6"

2-1/4"

3"

1-1/4"

3-3/4"

2"(Wall)

4-1/8"

6"(Base/Tall)

2"(Wall) 6"(Base/Tall)

4-1/8"

2"(Wall)

Straight Staggered

3/4"

6"

2-1/4"

25/32"

3/4"

7/16"

3/8"

3/4"

7/16"

3/8"

1/2"


Specialty Products

11

Support frame

Crown Floating Shelf

Floating Shelf

Floating Shelf(Includes Design & Material Charge)

Specie 30" 36" 42" 48" 60"

Cherry

Hard Maple

PG Maple

Red Oak

Crown Floating Shelf(Includes Design & Material Charge)

Specie 30" 36" 42" 48" 60"

Cherry

Hard Maple

PG Maple

Red Oak

Floating Shelves

The Floating Shelf is a functional way to add style to the interior décor of kitchens, bathrooms and other living areas throughout the house. These shelves have a support frame that must be mounted securely to the studs in the wall, then the exterior portion of the shelf slides over the support frame to completely conceal the sub-structure. The result is an attractive, fashionable shelf to display pictures, dishware and other interior design accents.

• Available species include Cherry, Hard Maple, Paint Grade Hard Maple and Red Oak.

• Each Floating Shelf consists of an inner support frame and outer shelf that slides into place over the support frame. These two elements are not sold individually.

Support frame ® Manufactured using 3/4" thick unselected hardwoods.

® Available in five lengths between 30" to 60", it is imperative that Floating Shelves be mounted to two or more wall studs using four or more coarse thread screws at least 2-1/2" in length. The 60" floating Shelf should be mounted to three or more studs.

Floating Shelf and Crown Floating Shelf ® The front and sides of the shelf are made from 3/4" solid hardwoods, mitered at the two front corners.

® The Crown Floating Shelf includes a modified crown moulding on the front and side returns.

® The shelf top and bottom is 3/8" thick plywood, matching the specie of the hardwood.

® Shelf thickness/height is 2-1/2".

® Shelf depth is 10".

® Once the Floating Shelf is fully installed, it is recommended that the shelf be secured to the support frame using headless pins or small finishing nails so the shelf cannot inadvertently slide off of the support frame.

• Floating Shelves are eligible with all published stains, Colourtones, Prism Paints and glazes.

• Maximum load capacity for the shelf and support frame is 10 lbs. per lineal foot. While Floating Shelves are built from strong, sturdy materials, the load capacity of these shelves is dependent on upon the quality of the installation screws and whether the shelves are secured into the wall studs. If not secured into two or more studs using two or more high quality installation screws per stud, the shelf may not support the desired weight. Conestoga will not be responsible for shelf failure due to inadequate installation techniques or materials.

• Finish pricing: Design Charge multiplier – 1.5x Material Charge – actual sq. footage x 1.25


Spec

ialty

Pro

duct

s

11

Sculpted Floating Shelf Pricing

Specie

Lengths

24" 36" 48" 60"

Part # Part # Part # Part #

Alder 2656004A 2656009A 2656014A 2656019A

Cherry 2656005A 2656010A 2656015A 2656020A

Hard Maple 2656006A 2656011A 2656016A 2656021A

Red Oak 2656007A 2656012A 2656017A 2656022A

Walnut 2656008A 2656013A 2656018A 2656023A

Floating Shelves

Sculpted Floating Shelves• Floating shelf mimics the look of reclaimed wood, with extreme distressing including hand

sculpting.

• Available species include Alder, Cherry, Hard Maple, Red Oak and Walnut.

Support frame ® Steel bracket(s) are finished with a matte black finish.

® Metal support frames are anchored to the wall. Shelving slides over and conceals support frame to provide the classic floating shelf appearance.

® Available in four lengths – 24", 36", 48", and 60".

® Support frame must be mounted to two or more wall studs using four or more coarse thread screws at least 2-1/2" in length. The 60" support should be mounted to three or more studs.

Shelf ® The front and sides are constructed from solid hardwoods.

® The shelf top and bottom is 1/2" thick hardwood.

® Shelf thickness/height is 2-5/8".

® Shelf depth is 10".

• Eligible with all published stains, Colourtones, Prism Paints and glazes.

• Finish pricing: Design Charge multiplier – 1.5x Material Charge – actual sq. footage x 1.25


Specialty Products

11

Stemware Holders

• Cutting boards are available in all published species.

• All cutting boards utilize category B material charge.

• Cutting boards available in 3/4" and 1" thickness.

• Minimum size for all styles is 10" x 10", maximum size is 18" x 22".

• All designs include 3/4" radius corners and 3/32" radius edges.

• Three-piece designs are made using 2-5/16" wide rails on face (horizontal grain) with pinless construction.

• All cutting boards have a routed drip groove into the face of the board to collect liquids.

• No oils or finishing treatments will be applied by Conestoga.

• Care instructions for wood cutting boards:

® Treat wood with butcher block oil or mineral oil only.

® To clean, wipe with a mixture of warm water and a mild dish detergent. Never submerge cutting boards in water or place in dishwasher.

• Due to repetitive exposure to liquids, cutting boards will not be warranted against bowing, warping, splitting or twisting.

Hand Pull - 1/4" deep, 3-1/2" long, 1/2" wide

Drip Groove - 5/32" deep

Custom Cutting Boards

3-piece Barrel

1-piece Slab 3-piece Slab

1-piece Barrel

• 30" (7 slots) or 36" (8 slots) lengths.

• Spacing between slats: 30" stemware holder – 1-1/8" 36" stemware holder – 1-3/8"

• Depth 11-1/4".

• Thickness 1-1/2".

• Accommodates most stemware styles.

• Available unfinished or finished. See the Finishing Program section for pricing.

3-1/16"

3-3/8"

Specie

Unfinished Price

30" 36"

Cherry

Hard Maple

Red Oak


Spec

ialty

Pro

duct

s

11

Front Frame Specifications

• Double dowel construction on standard width framing.

• Material will be Standard grade unless otherwise noted. Premium grade available, upcharges apply.

• Standard framing width is 1-1/2", additional widths available, upcharges apply.

• 3/4" framing thickness standard, 1" thick material is available, upcharges apply.

• Minimum framing width 3/4"; 15/16" for front frames with an edge profile.

• Material surfaced on four sides.

• Assembled frames sanded on front only with 220 grit sandpaper.

• Maximum front frame sizes are 120" in one direction and 48" in the other direction. For example, a front frame can be ordered 48" W x 120" H or 120" W x 48" H but not 120" W x 120" H.

• Framing wider than 4-1/2" may have one glue joint. Framing wider than 6-1/2" may have two glue joints.

• Minimum glue-in trimmable insert width is 1/2"; maximum glue-in trimmable insert width is 3".

Front Frame Tolerances• A tolerance of +/- 1/32" is considered acceptable on front frame exterior and interior opening

dimensions.

• A tolerance of +/- 1/32" out of square is considered acceptable on front frames under 12 sq. ft.

• A tolerance of +/- 1/16" out of square is considered acceptable on front frames 12 sq. ft. and over.

• 1/32" offset on frame back at any joint is considered acceptable.

• 1/64" offset at any exterior joint on the outside perimeter is considered acceptable.

Front Frame Ordering Information• Conestoga’s custom front frames can be ordered as beaded, non-beaded or profiled. To specify,

check the appropriate box in the beaded area of the order form.

• Front frame exterior dimensions, interior opening dimensions and framing widths can be ordered to the nearest 1/16".

• On beaded orders, customers may select specific openings to be “non-beaded” by specifying the opening letter designation. Example: “Do not bead opening S.”

• When ordering custom front frames for Conestoga Cabinet Systems, all framing and opening sizes must be specified by the customer. Only standard groove locations available.

• Front Frame Configuration Template Packet can be found on the Customer Business Portal. Contact Customer Service for sign on information or, request the Front Frame Configuration Template Packet from your Customer Service representative.

1/4" Bead 3/8" Bead 3/8" Ogee 1/4" V-BeadNon-beaded


Spec

ialty

Pro

duct

s

11

Premium Prefit/Inset Edge ProfilesStandard Lip Options

Inset Door and Drawer Front Information

• The following edge profile options are recommended for use with inset doors and drawer fronts.

• These edges have a 5 degree back bevel edge to ensure sufficient door clearance. Machine Edge and L-149 are available upon request at no additional upcharge.

• Front frames ordered with inset doors and drawer fronts will be pre-fit to the opening size. A 3/32" margin will be used on all sides for single doors and drawer fronts and between butt door pairs.

L-253 L-686

L-947

Design Exceptions• The following door and drawer front styles are not available for inset applications due to their

unique design characteristics: Astoria, CRP-1420, CRP-10191, CRP-10318, CRP-10334, CRP-10827, CRP-10875, CRP-10946, DVG Batten, Fairhaven, Flush Batten, Highland, LaSalle, Midland, Milan, Montclair, Prestige, Royal, Savoy, TW-10827, V-200 and Windham.

• Openings with trimmable inserts are not available beaded.

• L-253 and L-686 – only edge profiles available in MDF prefit products.

• Finished front frames are not available with antiquing or wear sanding.

• Distressed front frames will receive a modified distressing package.

L-304

L-996

Non-standard frame configurations will be processed through Special Designs.

Non-standard Framing WidthsMaterial Width

3/4" to 1-7/16"

1-1/2"

1-9/16" to 5-15/16"

6" to 7-7/16"

7-1/2" and wider

Front Frames Lead-times

ProductStandard

Lead-Time

Expedite max. 6 frames

Code Red Code Blue

Custom front frames 7 2 5

Options - additional working days

Shaped rail 3 3 3

Pre-fit inset doors 2 2 2 Orders containing products with different lead-times are given the lead-time date of the longest product.

Front Frame Pricing (continued)

L-967

L-1117 L-1120


Specialty Products

11

Inset Door and Drawer Front Information (continued)

• Custom front frames that are ordered with Colourtones and glazes will receive the same hand glazed finishes as doors. Cabinet Systems parts that are ordered with Colourtones and glazes will be finished with the special Colourtones that have been tinted to match the Colourtones and glaze combination. They will not receive a hand rubbed glaze. Some options, such as Heirloom and Brushed glazes that are available on Custom front frames are not available on Cabinet Systems carcass.

Inset Option with Miter Designs Not RecommendedOnly miter door designs with edge profile options are available with the inset option; however, miter designs are not recommended with the inset option. The following issues are associated with inset miter designs, and will not be considered defective:

® Miter lines may not intersect door corner after pre-fit sanding. This is not considered a defect as it is a necessary part of the pre-fit process to ensure the proper fit within the frame openings. This condition may not be pleasing to some customers.

® Panel expansion caused by high humidity may cause miter doors to bind inside frame openings. Although Conestoga’s miter door joint construction is one of the most durable in the industry, high humidity will cause solid wood center panels to expand in width. This pressure can result in framing pushing outward and creating a “barrel” effect where the framing rubs against the front frame.

® If a miter design is selected, it is highly recommended that door and drawer fronts be manufactured as 5-piece MDF, with MDF center panels or with plywood center panels. These materials will reduce the likelihood of product expansion and binding of inset doors within the front frame. While reducing the possibility of binding, expansion of solid wood framing can still occur and will not be considered defective.

1/8", 1/4" and 3/4" Plywood Program

• 1/8" thick sheet stock with Grade A face veneer applied over veneer core with sound back.

• 1/4" thick sheet stock with Grade A face and #1 back veneers applied over MDF core.

• 3/4" thick sheet stock with Grade A face veneer applied over veneer core with prefinished natural Birch back, except where otherwise noted.

• 3/4" thick full sheets or cut-to-size panels over 96-1/6" up to 120" in length of Hard Maple/Hard Maple will have an MDF core.

• All 1/8", 1/4" and 3/4" sheet stock is available in full 4' x 8' sheets, with the exception of Hard Maple/Hard Maple which is also available in 4' x 10' sheets. All sheet stock including 4' x 10' material is also available as cut-to-size panels.

• Plywood finished in Colourtones may have pin marks and scratches from drying racks, veneer checks, seam separation, glaze smudges, fingerprints, overspray and some dirt in topcoat. Such defects will be kept to a minimum, but are unavoidable when finishing large parts and will not be considered defective. 3/4" thick edges will not be finished unless edgeband has been applied.

• Lead-time 5 days cut-to-size, unfinished; 3 days for full sheets. Add 5-6 days for finishing.

• Additional sheet stock is available through Special Designs in common species, grades and thickness in single sheet minimums. Specify thickness, core type, specie (face and back), veneer grade (face and back) and veneer cut (face and back). Lead-times and pricing are subject to availability.


Spec

ialty

Pro

duct

s

11

Pricing Instructions• Multiply actual square footage of panel by the

appropriate specie material charge.

Options ® When ordering cut-to-size plywood, specify width, height and grain direction.

• Edgeband charges (3/4" plywood only):

• Grooving available (1/4" material only).

® G-012, G-015 or G-056 groove profiles.

® Spacing available in increments starting at 1/2" up to 4".

• Cut-to-size or full sheets of plywood also available finished; see Finishing Program section for finish options and pricing.

• Colourtone finishes are available on Cherry, Hard Maple, White Birch and Red Oak plywood only.

1/8", 1/4" and 3/4" Plywood Program (continued)

3/4" Plywood Panel ProgramSpecie (Face/Back)

Alder/Natural Birch

Bamboo, Caramelized/Bamboo (MDF core)

Cherry/Cherry

Cherry/Natural Birch

Hard Maple/Hard Maple

Hard Maple/Hard Maple 120" (MDF core)

Hard Maple/Natural Birch

Red Oak/Red Oak*

Red Oak/Natural Birch*

Rift Cut White Oak/Rift Cut White Oak (MDF core)

Walnut/Walnut (MDF core)

Wenge/Wenge* (MDF core)

Zebrawood/Zebrawood* (MDF core)

*Available with .5mm edgebanding only.

1/4" Plywood Panel ProgramSpecie

Alder

Birch, Red

Birch, White

Bamboo, Caramelized

Cherry

Maple, Hard

MDF (Raw)

Hickory

Knotty Pine

Quarter Sawn Red Oak

Quarter Sawn White Oak

Red Oak

White Oak

Walnut

1/8" Plywood Panel ProgramSpecie

Cherry

Maple, Hard


Specialty Products

11

1/4" Thick Solid Refacing Moulding Pricing8' Choice Grade 10 day lead-time

Specie

Moulding Width

1" 2" 3" 4" 5" 6"

Alder

Bamboo

Birch, Red

Birch, White

Cherry

Hickory

Maple, Hard

Maple, Soft

Oak, Red

Oak, White

PG Hard Maple

Pine

Walnut

1/4" Short Grain Plywood Program

• 96" x 48" panel for island back or wall panel applications.

• Grain runs vertically in the 48" direction.

• 1/4" thick material with Grade A face veneers applied over MDF core with sound back.

• Available unfinished or finished; see Finishing Program section for finish options and pricing.

• Lead-time 3 days unfinished, add 5-6 days for finishing.

1/4" Solid Refacer’s Program

• Moulding 2073 is solid 1/4" thick and designed to be applied over the face frames of existing cabinetry in field refacing applications.

• Available in 1/16" width increments from 1" to 6" wide x 96" long.

• Variable width refacer’s moulding is available in Choice grade material. Sizes shown in the table below are for 1/4" thick “surfaced four sides” (S4S) square stock, moulded and sanded.

• Available finished or unfinished. If finish option is chosen, moulding will be finished on face and two long edges only.

Ordering and Sizing Specifications• Moulding is categorized and priced by width. Moulding width refers to the smallest whole-inch

dimension of the refacing segment required. If the moulding is 1-1/4" wide, the appropriate pricing will be located in the 2" column. This rule is applicable to all sizes.

• Moulding wider than 5-1/16" may have one glue joint running the entire length.

1/4" x 96" x 48" PlywoodShort Grain Panel

Part # Specie

1600121A Cherry

1600122A Maple, Hard


Spec

ialty

Pro

duct

s

11

Veneers

• All veneers are approximately 1/32" thick and have real wood faces.

• One end and one side of any veneer sheet is guaranteed to be free from physical damage.

• Wood back veneers have a cross grain wood backer which allows trim edges to be finished to reduce “black line” effect.

• Poly back veneers are applied to a polymer resin impregnated membrane. They contain no added urea formaldehyde (NAUF), are rigid yet pliable and provide excellent moisture resistance.

• Wood back and poly back veneers are available with their applicable backer or a pressure sensitive adhesive (PSA). PSA veneers have a pre-glued adhesive layer protected by a peel coat covering that must be removed prior to application.

• Veneers are not guaranteed to perfectly match solid wood doors. Veneer is sliced from premium material; color and grain match will be more uniform than solid wood doors. Hickory veneers may contain mineral streaks and peck marks.

• Proper surface conditions and preparation is essential to successful application and performance of veneered surfaces.

• Per manufacturer’s recommendations, veneers of all backer types should be placed flat and allowed to acclimate 48 hours before installation.

• Pressure sensitive veneers should not be applied to bare wood or surfaces covered with sanding sealers, high pressure laminates, melamine or other plastic materials.

• Wood back and poly back veneers are best applied with roller grade adhesives. Sufficient adhesive coverage on both the veneer and substrate surface will ensure proper adhesion and performance.

• Conestoga is not liable for product failure due to improper surface preparation, adhesive selection or installation technique.

• Finishing option available. Stained veneers may vary slightly in color from solid wood products of the same specie. Finishing adds 5-6 days to standard lead-time.

• Conestoga does not accept returns on veneers.

* Available with Colourtone finishes. x When ordered with Colourtone, primer or Prism Paint finishes, phenolic back veneer will be substituted.

24" x 96" 48-1/2" x 96-1/2"

Specie PSA Wood Back PSA Poly Back Wood* Back Poly Back

Alder

Bamboo

Birch, Red

Birch, White

Cherry

Hickory

Maple, Hard

Oak, Red

Oak, White

Pine, Knotty

Quarter SawnWhite Oak

Walnut

Wenge

Stock item 3 day lead-time. Custom item 10 day lead-time.

Wood VeneerDouble Glue PaperWood Back(cross grain)

Wood VeneerWood Back (cross grain)Pre-gluedAdhesivePeel AwayCovering

Wood Veneer

Poly Backer Pre-gluedAdhesivePeel AwayCovering

Wood VeneerDouble GluePaperPoly Backer



Wood Veneer





Wood Veneer



Poly Back



Wood Veneer



PSA Wood Back

PSA Poly Back

Wood Back


Specialty Products

11

500' Wood Edgeband

Specie Specie

Alder Red Oak

Bamboo Walnut

Cherry Wenge

Hard Maple White Birch

Hickory White Oak

Pine

Wood Edgeband Program

Conestoga offers 7/8" wide x 250' or 500' rolls of .5mm wood edgeband to complete your panel processing requirements. See pricing charts below for specie availability.

• Real wood veneer applied to an unglued fleece backer.

• Edgeband is not guaranteed to perfectly match solid wood doors or sheet stock. Veneer edgeband is sliced from premium material; color and grain match will be more uniform than solid wood doors.

• Edgeband will contain multiple splice joints which will not be considered a defect.

• Conestoga is not liable for product failure due to improper surface preparation, adhesive selection or installation technique.

• All Conestoga finishing options are available as outlined in the Finishing Program section of this manual.

• Lead-time 5 days unfinished, add 5-6 days for finishing. Expedite lead-times not available.

• Conestoga does not accept returns of finished edgeband.

Price per roll, unfinished; see the Finishing Program section for finish pricing.

250' Wood Edgeband

Specie

Cherry

Hard Maple

Stock item 5 day lead-time. Non-stock item 15 day lead-time.


Spec

ialty

Pro

duct

s

11

PVC Edgeband Program

Thermoplastic PVC Edgeband• PVC edgeband rolls are 15/16" wide, 600' in length and .018" (.5mm) thick.

• Rolls of PVC edgeband are available in over 120 colors and grain patterns to match popular Conestoga finishes.

• The back side of the edgeband is coated with a bonding agent for superior adhesion when used with hot melt glues or solvent-based adhesives.

• PVC edgebands are impact resistant and perform well with cutting tools.

• The PVC edgebands listed provide a close match in appearance to the specie and finish referenced, however, due to color variations in wood substrates we cannot guarantee a perfect match. Some edgebands contain a slight texture and are identified with an asterisk in the chart.

• Conestoga is not liable for product delamination or adhesion failure due to improper surface preparation, adhesive selection or installation technique.

• Full rolls only, partial rolls are not available through this program.

• Lead-time is 4 days, expedites not available.

Since Conestoga offers thousands of specie, finish and glaze combinations, customers may have a need for an edgeband not listed in our standard offering. In this case, Conestoga will attempt to work with our suppliers to see if an existing match can be identified. Since a sample chip of the specie/finish must be produced and shipped to the supplier, there will be a fixed charge for this exercise, regardless if a match is found or not.

Part # Specie Finish Per Roll

Colourtones2602345A CH Crystal White w/Antiquing

2602347A CH Ebony

2602340A HM Antique White

2602341A HM Arctic White

2602422A HM Cadet Grey

2602342A HM Cadet Grey w/Onyx pinstriping

2602343A HM Chesapeake

2602344A HM Crystal White

2602346A HM Designer White

2602348A HM Frosty White

2602423A HM Frosty White w/Chai

2602349A HM Frosty White w/Coffee

2602350A HM Frosty White w/Oyster

2602351A HM Frosty White w/Pewter

2602424A HM Hearthstone Grey w/Coffee

2602425A HM Regent Blue

Heirloom2602426A CH Cadet Grey w/Coffee

2602427A CH Crystal White w/Coffee

2602428A CH Ebony/Cordovan Accents

2602429A CH Hearthstone Grey w/Coffee

2302430A HM Crystal White w/Coffee

Brushed Glaze2602431A HM Crystal White w/Coffee

2602432A HM Crystal White w/Pewter

2602433A HM Frosty White w/Oyster

2602434A HM Hearthstone Grey w/Coffee


Wiping Stains2602435A AL Autumn

2602436A AL Autumn w/Brown

2602437A AL Bordeaux

2602438A AL Chestnut

2602439A AL Colonial

2602440A AL Colonial w/Sable

2602441A AL Cordovan

2602442A AL Dark Roast

2602443A AL Espresso

2602444A AL Honey

2602445A AL Honey w/Sable

2602446A AL Natural

2602447A AL Natural w/Brown

2602448A AL Nickel

2602449A AL Nickel w/White

2602450A AL Nitefall

2602451A AL Nutmeg

2602452A AL Saddle

2602453A AL Saddle w/Sable

2602454A AL Washington Cherry

2602455A AL Washington Cherry w/Sable

2602608A BA Chestnut

2602609A BA Driftwood

2602610A BA Natural

2602611A BA Nutmeg

2602612A BA Espresso

2602352A CH Bordeaux

2602353A CH Bordeaux w/Sable*

*Textured


Specialty Products

11


Wiping Stains2602354A CH Chestnut

2602355A CH Chestnut w/Sable*

2602356A CH Colonial

2602357A CH Colonial w/Sable

2602417A CH Dark Roast

2602358A CH Espresso

2602418A CH Ginger

2602359A CH Harvest Gold

2602360A CH Honey w/Sable

2602361A CH Natural

2602362A CH Natural w/Sable

2602363A CH Nickel w/Brown

2602364A CH Nitefall

2602419A CH Nutmeg

2602420A CH Portabella*

2602421A CH Portabella w/Brown*

2602365A CH Saddle

2602366A CH Saddle w/Sable*

2602367A CH Washington Cherry

2602472A HI Autumn

2602473A HI Bordeaux

2602474A HI Chestnut

2602475A HI Colonial

2602476A HI Colonial w/Sable

2602477A HI Dark Roast*

2602478A HI Driftwood*

2602479A HI Honey w/Sable

2602480A HI Natural*

2602481A HI Natural w/Brown

2602482A HI Nickel

2602483A HI Nitefall

2602484A HI Nutmeg

2602485A HI Portabella

2602486A HI Saddle

2602368A HM Bordeaux

2602369A HM Bordeaux w/Sable

2602370A HM Chestnut

2602371A HM Dark Roast

2602372A HM Driftwood*

2602373A HM Espresso

2602374A HM Espresso w/Sable

2602375A HM Natural w/Brown

2602376A HM Portabella

2602377A HM Portabella w/White

2602378A HM Saddle

2602379A HM Saddle w/Brown

2602380A HM Washington Cherry


Wiping Stains2602456A RO Alpine*

2602457A RO Autumn

2602458A RO Bordeaux

2602459A RO Chestnut

2602460A RO Dark Roast

2602461A RO Driftwood*

2602462A RO Espresso

2602463A RO Harvest Gold

2602464A RO Natural

2602465A RO Nutmeg

2602466A RO Portabella

2602467A RO Portabella w/Pewter

2602468A RO Saddle

2602469A RO Saddle w/Brown

2602470A RO Saddle w/Sable*

2602471A RO Washington Cherry

Truetones2602487A CH Ashen w/Sable

2602488A CH Butter Rum

2602489A CH Cocoa

2602490A CH Cocoa w/Sable

2602491A CH Shale w/Sable

2602492A HM Ashen

2602493A HM Ashen w/Brown

2602494A HM Cocoa w/Sable

2602495A HM Shale w/Oyster

2602496A HM Shale w/Sable

2602497A HM Sienna

2602498A WO Ashen

2602499A WO Ashen w/Brown

2602500A WO Shale*

2602501A WO Shale w/Sable

PVC Edgeband Program (continued)

*Textured


Spec

ialty

Pro

duct

s

11

Ferrari Hinges• One piece steel, self closing concealed hinges are

designed for use with 3/4" thick front frames.

• Available for 1/2", 1-1/4" or 1-3/8" overlays.

• Soft close feature is integrated into the hinge cup.

• Hinges packaged in pairs with mounting screws and instructions.

• All hinges feature side, height and depth cam style adjustment for fine tuning door spacing.

• Wrap around face frame mounting for ease of installation.

• All Ferrari hinges require Pattern A - Cup Only concealed hinge boring.

• Ferrari hinges carry a limited lifetime warranty.

• Lead-time is 5 days.

Ferrari Hinges (per pair)

Part No. Overlay

2100196A 1/2"

2100197A 1-1/4"

2100198A 1-3/8"

Ferrari Framed Cabinetry Hinge Program

Ferrari Compacta 1/2" Overlay Hinge 105° opening angle

Ferrari Compacta 1-1/4" and 1-3/8" Overlay Hinge 110° opening angle


Specialty Products

11

Blum COMPACT BLUMOTION Hinge Program

Blum Hinges with Integrated Soft Close• One-piece steel, concealed, self closing hinges

designed for use with 3/4" thick front frames.

• Available for 1/2", 1-1/4" and 1-3/8" overlays.

• Soft close feature is integrated in the hinge cup itself.

• Soft close function can be easily deactivated with a switch on individual hinges as needed based on the door size and weight.

• Hinges packed in pairs with mounting screws.

• All hinges feature side, height, and depth adjustment for fine tuning door spacing with wraparound face frame mounting for ease of installation.

• All hinges require Pattern A – Cup Only concealed hinge boring.

• COMPACT BLUMOTION hinges carry a limited lifetime warranty.


COMPACT w/Integrated BLUMOTION

Part No. Overlay

2100150A 1/2"

2100151A 1-1/4"

2100152A 1-3/8"

1/2" Overlay HingeCOMPACT BLUMOTION 38N 105˚ opening angle

1-1/4" and 1-3/8" Overlay HingeCOMPACT BLUMOTION 39C 110˚ opening angle

Integrated BLUMOTION Bulk Pack (50 hinges)

Part No. Overlay

2100153A 1/2"

2100154A 1-1/4"

2100155A 1-3/8"


Spec

ialty

Pro

duct

s

11

Blum Frameless Cabinetry Hinge Program

Blum INSERTA Hinges • Hinge and inline mounting plate system for frameless

wall, base and tall cabinetry. Will not work in angle or specialty frameless cabinetry. For corners see INSERTA 170° corner hinge below.

• 110° opening angle.

• Soft close function is integrated in the hinge cup itself.

• Soft close function can be easily deactivated with a switch on individual hinges as needed based on the door size and weight.

• Hinges packed in pairs with mounting plates and instructions.

• No screws required for hinge or mounting plate installation. Both components use cam style insert plugs.

• Inline mounting plates utilize 32mm system holes and are concealed behind the hinge arm when installed for a clean interior appearance.

• Hinge and mounting plate feature side to side, height and depth adjustment for fine tuning of door spacing.

• Requires Pattern B - with Insert Holes concealed hinge boring.

• Blum INSERTA hinges carry a limited lifetime warranty.


• Part number: 2103574.

Blum INSERTA 170° Corner Hinges • Provides full access to cabinet interiors with 170°

opening angle.

• Does not include soft close feature.

• Hinges packed in pairs with mounting plates and instructions.

• No screws required for hinge or mounting plate installation. Both components use cam style insert plugs.

• Inline mounting plates utilize 32mm system holes and are concealed behind the hinge arm when installed for a clean interior appearance.

• Requires Pattern B - with Insert Holes concealed hinge boring.

• Blum INSERTA hinges carry a limited lifetime warranty.


• Part number: 2103575.

CLIP top 170° corner hinge EXPANDO in-line mounting plate

CLIP top BLUMOTION 110° hinge EXPANDO in-line mounting plate


Specialty Products

11

• Blum’s AVENTOS HK model door lift system is available for hinge upward applications.

• Four AVENTOS kits provide all the necessary hardware to install lift up door access for wall cabinets.

• Kits are designed to accommodate different door design types, weights and overlay options.

• Each kit includes left and right lift mechanisms, cover caps and a separate pair of mounting hardware for framed or frameless cabinet construction.

• All AVENTOS mechanisms have an integrated BLUMOTION soft close feature.

AVENTOS HK Reference ChartPower Factor HK Kit Series Part No.

43 – 99 2300 2100350

100 – 174 2500 2100351

175 – 349 2700 2100352

350 – 792 2900 2100353

AVENTOS Accessory ItemsDescription Blum Part No. Part No.

Mounting Hardware Set 20S4200A 2100354

Restriction Clip 20K7041 2100355

Restriction Clip 20K7011 2100356

Blum AVENTOS HK Lift System Hardware

• To determine which AVENTOS kit is suited for your particular application use the following resources:

® A link to Blum Hardware’s AVENTOS Lift System Calculator is provided on Conestoga’s Customer Business Portal under the Marketing Resources tab. Use this tool to calculate the weight of your door.

® After you have determined the weight of the door, calculate the Blum Power Factor required to adequately lift the door as follows:

Door Weight + (Handle/Pull Weight x 2) = Subtotal x Door Height = Power Factor

Specie & Door Design Weight (approx. weight of 1 sq. ft. 3/4" thick door)

Specie (all grades) Slab Design TW-series Design CRP-series Design Frame Only

Alder, Pine 1 lb. 15 oz. 1 lb. 3 oz. 1 lb. 12 oz.

1 lb. 11 oz.

Birch Red, White 2 lb. 9 oz. 1 lb. 9 oz. 2 lb. 11 oz.

Cherry, Walnut 2 lb. 4 oz. 1 lb. 6 oz. 2 lb.

Maple Paint Grade, Hard, Soft 2 lb. 12 oz. 1 lb. 11 oz. 2 lb.

Bamboo, Hickory, Red Oak, White Oak 3 lb. 3 oz. 1 lb. 15 oz. 2 lb. 11 oz.


Spec

ialty

Pro

duct

s

11

Select Range Hood• Hood must be secured to adjacent cabinets.

• Manufactured from solid wood and wood veneers.

• Includes 24 gauge silver metallic liner.

• Liner accommodates the following Broan ventilators: 250CFM - RHVBF10SM 390CFM - RHVBB20SM Contact Omega National Products: (800) 533-8809.


• Custom sizes not available.

Entry Level Range Hoods

Batten Select Range Hood• Hood must be secured to adjacent cabinets.


• Galley rail included, packaged separately.

• Includes 24 gauge silver metallic liner.

• Liner accommodates the following Broan ventilators: 250CFM - RHVBF10SM 390CFM - RHVBB20SM Contact Omega National Products: (800) 533-8809.



24"

3/4"8"

30", 36"

4-3/16"

24"

6"

3/4"6.83"

30", 36"

Unfinished Price

Specie 30" 36"

Alder

Cherry

Hard Maple

Red Oak

Unfinished Price

Specie 30" 36"

Alder

Cherry

Hard Maple

Red Oak


Specialty Products

11

Range Hoods

46"

38-5/16", 44-5/16", 50-5/16"20-1/16"

19" 36", 42", 48"6"

12"Trimmable

17", 23", 29"9-1/2"

Artisan Range Hood• Complete turnkey solution with patented hanging

cleat for quick and easy installation.


• Up to 12" may be trimmed from the top of the chimney.

• Includes silver metallic powder-coated liner.

• Liner accommodates the following Broan ventilators: 250 CFM - RHVBF10SM 390 CFM - RHVBB20SM 500 CFM - RHVBB30SS 1100 CFM - RHVBHLB11 Contact Omega National Products: (800) 533-8809.



Euro Range Hood• Contemporary wall-mounted hood with patented

hanging cleat for quick and easy installation.

• Manufactured from solid wood and plywood.

• Includes 23-1/2" trimmable chimney.

• Includes silver metallic powder-coated liner.

• Liner accommodates the following Broan ventilators: 250 CFM - RHVBF10SM 390 CFM - RHVBB20SM 500 CFM - RHVBB30SS 1100 CFM - RHVBHLB11 Contact Omega National Products: (800) 533-8809.



16-1/2"

23-1/2"

30", 36", 4

2"

19"

9-11/16"

11-3/8", 17-3/8", 23-3/8"

Unfinished Price

Specie 36" 42" 48"

Cherry

Hard Maple

Red Oak

Unfinished Price

Specie 30" 36" 42"

Cherry

Hard Maple


Spec

ialty

Pro

duct

s

11

Le Marcin Range Hoods

Conestoga’s Le Marcin line of range hoods offers attractive design at highly competitive pricing. With savings ranging from 15% to 40% below comparable designs, these mantle style hoods are constructed with plywood cases with solid wood fronts. Offering design flexibility, LM series hoods complement traditional, transitional or shaker styling with attributes that include display shelves, choices of framing beads, panel raises and optional corbel packages for select hoods.

Program Details• All models are constructed using 1/2" plywood cases including full backs and full bottoms that

can be trimmed to accommodate a variety of ventilation systems and top stretchers to ensure stability and squareness.

• Range hood fronts are fabricated using 3/4" thick solid wood or with MDF center panels when Paint Grade Hard Maple is selected.

• Range hood bottoms are lined with an anodized aluminum laminate with a stainless steel finish. Laminated bottoms are removable for ease of cutting ventilator openings.

® Metal laminate provides 1/A fire rating and GreenGuard Indoor Air Quality Certification. ® This full width and depth liner provides superior flexibility when selecting a ventilation system.

• Profile options: ® Framing beads: choose from any of the 7 published framing beads (page 7.2). ® Panel raises: choose from any of the 14 published panel raises (page 7.2).

• Specie options include Cherry, Hard Maple and Paint Grade Hard Maple Hybrid.

• All hoods (except LM6 and LM8) have a removable front top panel for easy access to ventilator systems.

• Each hood (except LM8) has a 2" fixed top rail to attach crown mouldings.

• The inside dimensions of all LM hoods will be 1" less than the exterior dimension of the hood width. The interior depth will always be 19-1/2".

• Shelf edge profiles – select one of 6 edge profiles to accentuate the decorative shelf: B-2, H-2, L-034, Machine Edge, PRS-2 or V-2.

• Each shelf includes a plate rout for easy display.

• Height of valances – when the hood height is 42" or less, the valance height is 12-1/2". When the hood height is 48", the valance height is 15-1/2".

• Ventilation systems not included. Stainless steel ventilation units for the Le Marcin series of hoods are available through [email protected].

• Range hoods are available unfinished or finished; see Finishing Program section for finish options.

• All hoods will ship from East Earl, PA.

• Lead-time is 8 days unfinished with an additional 5 to 6 days for most finishes.

• Expedites not available.

• Customization in size, specie or design is not available.• Example: LM3B4842 = LM3 model, B indicates 5-3/4" wide stiles, 48" width and 42" height.

Standard Dimensions

LM1-LM7 LM8

Widths 30", 36", 42", 48", 54" 33", 39", 45", 51"

Heights 24", 30", 36", 42", 48" 24", 27", 30", 33", 36", 39", 42"

Depth 21" (no options) 21" (no options)


Specialty Products

11

Concord

Part No. Specie Width Depth Height

2652890A Cherry 1-3/4" 5" 8-1/16"

2652891A Maple 1-3/4" 5" 8-1/16"

2652892A Paint Grade 1-3/4" 5" 8-1/16"

2652915A Cherry 3" 5" 8-1/16"

2652916A Maple 3" 5" 8-1/16"

2652917A Paint Grade 3" 5" 8-1/16"

Jennings


2652740A Cherry 1-3/4" 4-7/8" 9-1/2"

2652741A Maple 1-3/4" 4-7/8" 9-1/2"

2652742A Paint Grade 1-3/4" 4-7/8" 9-1/2"

2652760A Cherry 3" 4-7/8" 9-1/2"

2652761A Maple 3" 4-7/8" 9-1/2"

2652762A Paint Grade 3" 4-7/8" 9-1/2"

Pickford


2652695A Cherry 1-3/4" 5" 7-1/2"

2652696A Maple 1-3/4" 5" 7-1/2"

2652697A Paint Grade 1-3/4" 5" 7-1/2"

2652720A Cherry 3" 5" 7-1/2"

2652721A Maple 3" 5" 7-1/2"

2652722A Paint Grade 3" 5" 7-1/2"

Corbel OptionsThree popular corbel designs are available to accessorize your range hood: Concord, Jennings and Pickford.

• When corbel option is selected, pricing includes 2 matching specie corbels installed beneath the display shelf.

• 2-3/4" stiles will receive 1-3/4" wide corbels. 5-3/4" stiles will receive 3" wide corbels.

• When selecting corbel option, indicate part number for desired corbel below.

Le Marcin Range Hoods (continued)

Range Hood NomenclatureWhen ordering your range hood from the Le Marcin collection, follow these guidelines to identify the correct part number for your hood:

• The first 3 characters identify the hood design – LM1, LM2, LM3, LM4, LM5, LM6 LM7 or LM8.

• The fourth character designates the width of the framing stiles – 3 options exist: ® “A” designates hood with 2-3/4" framing. ® “B” designates hood with 5-3/4" framing. ® “X” designates hood with doors (LM6 model only). ® LM8 has no framing or door designation. ® There are no other options - must select A, B or X.

• The fifth and sixth characters are the overall hood width.

• The seventh and eighth characters are the overall hood height.


Spec

ialty

Pro

duct

s

11

LM1A and LM1B Mantle Hood w/Display Shelf• Mantle style hood with arched valance, designed

to mount between wall cabinets.

• Arch valance and upper section of face can receive raised or recessed panels.

• Removable front top panel is standard.

• Includes a 1" thick, 6" deep display shelf, attached. Shelf sandwiched between two panels.

• LM1A – 2-3/4" stiles. LM1B – 5-3/4" stiles.

• Corbel options available - see page 11.29.

• 2" fixed top rail to attach crown mouldings.

• Custom size, specie or design is not available.

Part Number

SpecieLM1- 36x24

LM1- 36x30

LM1- 42x30

LM1- 36x36

LM1- 42x36

LM1- 48x36

LM1- 30x42

LM1- 36x42

LM1- 42x42

LM1- 48x42

LM1- 54x42

LM1- 48x48

Cherry

Hard Maple

PG Hard Maple

LM2A and LM2B Mantle Hood w/Display Shelf• Mantle style hood with 1-piece solid arched

valance, designed to be mounted to the wall and adjacent cabinetry.

• Removable front top panel is standard and can receive raised or recessed panels.

• Includes a 1" thick, 6" deep display shelf, with under shelf moulding build-up attached. Shelf sandwiched between two panels.




Part Number

SpecieLM2- 36x24

LM2- 36x30

LM2- 42x30

LM2- 36x36

LM2- 42x36

LM2- 48x36

LM2- 30x42

LM2- 36x42

LM2- 42x42

LM2- 48x42

LM2- 54x42

LM2- 48x48

Cherry

Hard Maple

PG Hard Maple

2-3/4" (A)5-3/4" (B)

2"

4-1/2"

12-1/2"or

15-1/2"

21"

Variable

2"

4-1/2"

21"

2-3/4" (A)5-3/4" (B)

12-1/2"or

15-1/2"



Specialty Products

11

LM3A and LM3B Shaker Hood w/Display Shelf• Shaker style mantle hood designed to be mounted

to the wall and adjacent wall cabinets.

• Removable front top panel is standard and can receive raised or recessed panels.

• Includes a 1" thick, 6" deep display shelf, attached. Shelf sandwiched between two panels.


• Corbel options available - see page 11.29.



Part Number

SpecieLM3- 36x24

LM3- 36x30

LM3- 42x30

LM3- 36x36

LM3- 42x36

LM3- 48x36

LM3- 30x42

LM3- 36x42

LM3- 42x42

LM3- 48x42

LM3- 54x42

LM3- 48x48

Cherry

Hard Maple

PG Hard Maple

2"

4-1/2"

21"2-3/4" (A)5-3/4" (B)

Corbels optional,

upcharge applies.

12-1/2"or

15-1/2"

2-3/4" (A)5-3/4" (B)

2"

4-1/2"

21"

12-1/2"or

15-1/2"

LM4A and LM4B Arched Valance Hood• Mantle style hood with solid arched valance,

designed to be mounted to the wall and adjacent cabinetry.

• Removable 4 panel front is standard.

• Shelf and corbel option not available with LM4 series.




Part Number

SpecieLM4- 36x24

LM4- 36x30

LM4- 42x30

LM4- 36x36

LM4- 42x36

LM4- 48x36

LM4- 30x42

LM4- 36x42

LM4- 42x42

LM4- 48x42

LM4- 54x42

LM4- 48x48

Cherry

Hard Maple

PG Hard Maple



Spec

ialty

Pro

duct

s

11

LM5A and LM5B Mantle Hood w/Elegant Arch Valance• Mantle style hood with elegant arched valance

and under shelf moulding build-up.

• Upper section of face can receive raised or recessed panels.

• Removable front top panel is standard to access ventilation system. Shelf sandwiched between two panels.

• Includes a 1" thick, 6" deep display shelf, attached.

• LM5A – 2-3/4" stiles. LM5B – 5-3/4" stiles


• Corbel option not available with LM5 series.


Part Number

SpecieLM5- 36x24

LM5- 36x30

LM5- 42x30

LM5- 36x36

LM5- 42x36

LM5- 48x36

LM5- 30x42

LM5- 36x42

LM5- 42x42

LM5- 48x42

LM5- 54x42

LM5- 48x48

Cherry

Hard Maple

PG Hard Maple

LM6X Mantle Hood w/Doors• Mantle style hood with straight bottom

valance. Top section is a front frame with 2 to 3 openings to accommodate door designs to match surrounding cabinetry.

• Functioning doors allow easy access to ventilation system.

• Must specify door design and overlay.

• Overlays – select from 1/2", 1-1/4" and 1-3/8".

• Strata, Allure, Polyethylene and Aluminum Framed doors not available with LM6 series.


• Includes a 1" thick, 6" deep display shelf, with under shelf moulding build-up attached.


Part Number

SpecieLM6- 36x24

LM6- 36x30

LM6- 42x30

LM6- 36x36

LM6- 42x36

LM6- 48x36

LM6- 30x42

LM6- 36x42

LM6- 42x42

LM6- 48x42

LM6- 54x42

LM6- 48x48

Cherry

Hard Maple

PG Hard Maple

2-3/4" (A)5-3/4" (B)

2"

4-1/2"

21"

12-1/2" or

15-1/2"

2"

21"

11"



Specialty Products

11

LM8 Modern Hood w/Tapered Panel• Modern style hood with 8" high apron and tapered

upper panel.

• Exterior depth always 21".

• Trim moulding between apron and tapered upper panel has a 1" overhang on both sides and front.

• Hood width listed below includes the moulding overhang.

• Widths - 33", 39", 45", 51".

• Heights - 24", 27", 30", 33", 36", 39", 42".

• Apron available with matching base, black laminate, stainless steel laminate or copper laminate. Must specify.

• Removable panel and corbel option not available with LM8 series.


Part Number

SpecieLM8- 33x30

LM8- 33x36

LM8- 33x42

LM8- 39x27

LM8- 39x33

LM8- 39x36

LM8- 45x27

LM8- 45x30

LM8- 45x36

LM8- 45x42

LM8- 51x36

LM8- 51x42

Cherry

Hard Maple

PG Hard Maple

LM7B Mantle Hood w/Bottom Shelf Base• Mantle style hood with 4-1/2" deep by 8" high

mantle shelf capped with decorative moulding.

• Panel section of face can receive raised or recessed panels.

• Removable front top panel is standard to access ventilation system.

• LM7B – 5-3/4" stiles only.




Part Number

SpecieLM7- 36x24

LM7- 36x30

LM7- 42x30

LM7- 36x36

LM7- 42x36

LM7- 48x36

LM7- 30x42

LM7- 36x42

LM7- 42x42

LM7- 48x42

LM7- 54x42

LM7- 48x48

Cherry

Hard Maple

PG Hard Maple

21"

8"

2"

21"

4-1/2"

8"



Spec

ialty

Pro

duct

s

11

Stanisci Design Range Hoods

Stanisci Design is a leading manufacturer of wood range hoods for the custom kitchen industry. This program allows for convenient ordering of custom range hoods and ventilation units. Conestoga’s published offering includes several popular hood designs with panel raise and bead options. Both plywood and raised panel hoods are available in a wide variety of heights and widths.

Program Details• Range hoods are available unfinished or finished; see Finishing Program section for finish options

and pricing.

• Pre-finished hoods will ship from Conestoga’s Kenly, N.C. facility.

• Custom species include African Mahogany, Hickory and Rustic Knotty Alder.

• Custom sizes and designs are available. Contact Special Designs for a quote.

Examples of custom designs:

• Liners are not included with hood unless otherwise noted. Stainless steel ventilation units and liners are available from Stanisci Design with discounted Conestoga program pricing. Contact Stanisci Design at (248) 572-6880.

• Recommended ventilator: Stainless steel units from 300 to 1500 CFM are available through Stanisci Design (248) 572-6880.

• Stanisci hoods are available in catalog format, compatible with 20/20 Design software. Contact your Sales Representative for information.

• Value line ventilation systems are also available for Stanisci Design range hoods: silver metallic powder coat finish, 390 CFM multi-blower with two 40w lights (no discount available).

PLEASE NOTE: All Stanisci Range Hoods should be mounted no closer than 30" above cook tops, although some cook tops require additional clearance. Please check local building codes and appliance specifications.

Removable panel

Removable Applied Panel Option• Available on G, GRA, JRA, T, TRA and I-Series

hoods.

• Allows for easy installation and access by building inspectors.

• Panel features applied moulding for finished look after installation.

• No additional lead-time required.

• When ordering specify the hood design then “Removable Applied Panel Option”.

Hood shown with single panel valance

Hood shown with integrated corbels

Hood shown with stainless steel base

Hood shown with metal banding


Specialty Products

11

Stanisci Design Range Hoods (continued)

Optional Moulding Packages• Most hoods are available with a choice of either Classic or Simple moulding package. See

illustrations below for examples of differences between the two moulding profiles.

• Classic package is a more traditional style moulding. Simple package is made for contemporary/transitional kitchens.

• Both packages have no effect on pricing, lead-time or overall dimensions.

• Moulding packages available on all Stanisci hoods except the Z300, Q and M hoods.

• When ordering a range hood specify moulding package.

Above moulding packages available for G, T, I, E, J, S, A, W, H, H2 P and Z200 hoods (P and Z200 available in Simple package only).

Above moulding packages available for B, D, L, N, O, R, U and X hoods.

Antiquing, Distressing and Wear SandingTo allow our customer to purchase prefinished Stanisci range hoods with the same overall appearance of their doors, Conestoga now offers the Antiquing, Distressing and Wear Sanding options on Stanisci hoods. The intensity and placement of these treatments will vary by hood design as some of these products are made from plywood and will not accept Antiquing or Wear Sanding without exposing the substrate of the plywood. However, trim mouldings on plywood hoods can be Antiqued or Wear Sanded.

• These treatment options available with Stanisci brand range hoods only.

• Availability of these options varies by hood design.

Classic Package

Classic Package

Simple Package

Simple Package


Spec

ialty

Pro

duct

s

11


16"

42"

8-3/4"

17-1/4"

12"Variable

23-3/8"To tip of moulding

12"

16"

42"

8-3/4"

17-1/4"


1-1/2"

Variable

VCHIM Series Hood – Straight Valance• Stylish straight valance complements traditional or

contemporary designs.

• Designed to fit up to a 9 foot ceiling.

• Plywood chimney and upper. Solid wood apron.

• 17-1/4" chimney can be trimmed to desired height and is shipped unattached.

• Lead-time 5 days unfinished, add 7 days for finishing.

• Fixed panel standard. Removable panel not available.

• Ventilators available through Stanisci Design.


VCHIM Series Hood – Arched Valance• Stylish arched valance complements traditional

designs.

• Arched valance has regular bead, G-Cove Raise - no options.

• Designed to fit up to a 9 foot ceiling.

• 17-1/4" plywood chimney can be trimmed to desired height and is shipped unattached.


• Fixed panel standard. Removable panel not available.

• Ventilators available through Stanisci Design.


Add 2-1/4" to width listed in pricing chart for actual overall width including trim moulding.


Part Number

Specie SV-30x42 SV-36x42 SV-42x42 SV-48x42

Alder

Cherry

Hard Maple

Red Oak

Part Number

Specie AV-30x42 AV-36x42 AV-42x42 AV-48x42

Alder

Cherry

Hard Maple

Red Oak


Specialty Products

11



13-11/16"30"

7-11/16"

8-5/8"

23-3/8"

12"

To tip of moulding

13-11/16" 32"

10-5/16"

23-3/8"

8"

To tip of moulding

12"

2-1/2"


G-Standard Hood• G-Series is designed to best fit 8 foot ceilings.

• Removable chimney may be trimmed to desired height.


• Fixed panel standard. Removable panel optional.

• Custom sizes available through Special Designs.

G-Raised Arch Hood• G-Raised Arch Series is designed to best fit

8 foot ceilings.

• Profile options – Framing Bead: Regular, Elite, Ogee or Square. Panel Raise: Slant, G-Cove, RM, M-Bead or P-057. (P-057 also available in MDF)





Part Number

Specie G-36 G-42 G-48 G-54 G-60

Alder, Cherry

Hard Maple, Red Oak

Walnut, Q.S. White Oak

Part Number

Specie GRA-36 GRA-42 GRA-48 GRA-54 GRA-60

Alder, Cherry

Hard Maple, Red Oak



Spec

ialty

Pro

duct

s

1117-1/8"

14-1/4"

42"

10-5/8"


12"

12"

17-1/8"42"

14-9/16"

10-5/16"

To tip of moulding

23-3/8"

2-1/2"


T-Standard Hood• T-Series is designed to best fit 9 foot

ceilings and taller.





T-Raised Arch Hood• T-Raised Arch Series is designed to best fit 9 foot

ceilings and taller.






Part Number

Specie T-36 T-42 T-48 T-54 T-60

Alder, Cherry

Hard Maple, Red Oak


Part Number

Specie TRA-36 TRA-42 TRA-48 TRA-54 TRA-60

Alder, Cherry

Hard Maple

Red Oak





Specialty Products

1122-1/4"6"

2"M-Series Hood w/Display Shelf

• Will accommodate corbels up to 5" wide, 10-1/2" high and 6" deep under display shelf. See the Wood Accents and Ornament pages in section 12 or the Enkeboll and Art for Everyday price lists for corbel selections.


• Hood includes 6-3/4" deep display shelf, shipped unattached.


• Removable panel only. Fixed top rail standard.

• Standard sizes: 30", 36", 42", 48", 54" and 60" widths; 24", 30", 36", 42" and 48" heights.


Rise24"– 36" is 4"42"– 60" is 6"


Part Number

Specie M-30x24 M-36x24 M-42x24 M-48x24 M-54x24 M-60x24 M-30x30 M-36x30 M-42x30 M-48x30

Alder, Cherry

Hard Maple

Red Oak



Alder, Cherry

Hard Maple

Red Oak



Alder, Cherry

Hard Maple

Red Oak



Spec

ialty

Pro

duct

s

11

22-1/4"

13-1/2"

5"

2"


3"

2-1/2"

Variable

10-5/16"

11-3/8"

12"

To tip of moulding

J-Raised Arch Hood• J-Raised Arch is designed to be mounted between left

and right cabinets.

• Hood can be sized to best fit 8 or 9 foot ceilings.




• Standard sizes: 33", 39", 45", 51", 57" and 63" widths; 30", 36" and 42" heights.


Q-Standard Hood w/Display Shelf• Valance/mantle style hood is designed to be mounted

between left and right cabinets.


• Hood includes attached shelf and shelf supports.



• Standard sizes: 30", 36", 42", 48", 54" and 60" widths; 24", 30", 36", 42" and 48" heights.

• Custom sizes available through Special Designs.6-3/4" wide display shelf and two supports included.

Part Number

Specie Q-36x24 Q-42x24 Q-30x30 Q-36x30 Q-42x30 Q-48x30 Q-36x36 Q-42x36 Q-48x36 Q-36x42 Q-42x42 Q-54x42

Alder, Cherry

Hard Maple

Red Oak


Part Number

SpecieJRA-33x30

JRA-39x30

JRA-45x30

JRA-51x30

JRA-57x30

JRA-63x30

JRA-33x36

JRA-39x36

JRA-45x36

JRA-51x36

JRA-57x36

JRA-63x36

Alder, Cherry

Hard Maple, Red Oak



Specialty Products

116-1/8"

1-3/4" 17-1/4"

2-1/2"

10-5/16"


S-Raised Arch Hood w/Display Shelf• Profile Options –

Framing Bead: Regular, Elite, Ogee or Square. Panel Raise: Slant, G-Cove, RM, M-Bead or P-057. (P-057 also available in MDF)

• Display shelf depth is 6-1/8" deep.


• Removable panel only.

• Standard sizes: 33", 39", 45", 51", 57" and 63" widths; 24", 30", 36" and 42" heights.


H-Raised Arch Hood w/Display Shelf• Hearth style hood featuring incorporated display shelf.


• Display shelf depth is 8-1/8" to tip of moulding.

• 54" and 60" wide hoods – have two top panels.

• 66" wide hoods have three panels on top wainscot.

• Accommodates corbels up to 9" wide, 10-1/2" high and 6-3/4" deep.



• Standard sizes: 54", 60" and 66" widths; 44", 50" and 56" heights.


Variable

9"

18-3/4" Pillar

12"

Variable

13-1/2"

2-1/2"

Part Number

SpecieSRA-39x24

SRA-45x24

SRA-51x24

SRA-39x30

SRA-45x30

SRA-51x30

SRA-39x36

SRA-45x36

SRA-51x36

SRA-39x42

SRA-45x42

SRA-51x42

Alder, Cherry

Hard Maple

Red Oak


Part Number

Specie HRA-54x44 HRA-60x44 HRA-66x44 HRA-54x50 HRA-60x50 HRA-66x50 HRA-54x56 HRA-60x56 HRA-66x56

Alder, Cherry

Hard Maple

Red Oak



Spec

ialty

Pro

duct

s

11


Variable

9"

18-3/4" Pillar

12-3/4"

6"

Variable

Small Panel Pillar

Full panel pillars shown

28"

W-Raised Arch Hood w/Display Shelf• Profile options –

Framing Bead: Regular, Elite,Ogee or Square. Panel Raise: Slant, G-Cove, RM, M-Bead or P-057. (P-057 also available in MDF)

• Specify full panel or small panel pillars. Small panel pillars can accommodate corbels up to 9" wide, 10-1/2" high and 6" deep.

• 30" clearance between bottom of pillar and bottom of arched panel.

• Display shelf depth is 8-1/8" deep.

• Ships in four pieces, ready to assemble.

• Spice Rack Pull Out option includes racks in both left and right pillars; upcharge applies.

• Spice rack dimensions: 26" high x 10-3/4" wide.



• Standard sizes: 66", 72", 84" and 90" widths; 60", 72" and 84" heights.


Spice Rack Option(Corbel not included)

Part Number

SpecieWRA-66x60

WRA-72x60

WRA-84x60

WRA-90x60

WRA-66x72

WRA-72x72

WRA-84x72

WRA-90x72

WRA-66x84

WRA-72x84

WRA-84x84

WRA-90x84

Alder, Cherry

Hard Maple

Red Oak


*Minimum width is 66".


Specialty Products

11

10-5/8"

Variable

To tip of moulding

23-3/8"

E-Standard Hood• E-Series can be sized to fit 8 or 9 foot ceilings.


• E-Series hoods are not trimmable. Specific heights available through Special Designs.

• Fixed panel only.

• Standard sizes: 36", 42", 48", 54" and 60" widths; 30", 42" and 48" heights.



11-11/16"

Variable

8-5/8"

26-3/8"

To tip of moulding

14"I-Series (Four-sided Island Hood)

• I-Series hood is designed to provide ventilation above an island range.

• Overall height must be provided when ordering I-series.

• Prefinished hoods will be finished on all 4 sides.

• Includes installation hardware.




Part Number

Specie E-36x30 E-42x30 E-54x30

Alder, Cherry

Hard Maple

Red Oak


Specie E-36x42 E-42x42 E-48x42

Alder, Cherry

Hard Maple

Red Oak


Part Number

Specie I-36 I-42 I-48 I-54 I-60

Alder, Cherry

Hard Maple

Red Oak





Spec

ialty

Pro

duct

s

11

12"

23-7/16"

P-Series Hood• P-Series is designed to be mounted to the wall and

adjacent cabinets.


• Fixed panel standard. Removable panel optional, available through Special Designs only.

• Available with Simple Moulding Package only.




12"

23-3/8"

Z200• Z200 series is a transitional hood designed to be

mounted to the wall and adjacent cabinets.



• Only available with Simple Moulding Package.



Part Number

Specie P-39x30 P-45x30 P-57x30 P-33x36 P-39x36 P-45x36 P-51x36 P-57x36 P-33x42 P-45x42 P-51x42 P-63x42

Alder, Cherry

Hard Maple

Red Oak


Part Number

Specie Z200-39x30

Z200-45x30

Z200-57x30

Z200-33x36

Z200-39x36

Z200-45x36

Z200-51x36

Z200-57x36

Z200-33x42

Z200-45x42

Z200-51x42

Z200-63x42

Alder, Cherry

Hard Maple

Red Oak



Specialty Products

11

Z-300• Z300 series is a transitional hood designed to be

mounted to the wall and adjacent cabinets.

• 6" apron can be detached for ease of finishing.



• Moulding Package not available.

• Standard sizes: 33", 36", 42", 48", 54" and 60" widths; 24", 30", 36" and 42" heights.



Part Number

Specie Z300-36x24

Z300-42x24

Z300-36x30

Z300-42x30

Z300-48x30

Z300-48x36

Z300-60x36

Z300-36x42

Z300-42x42

Z300-48x42

Z300-54x42

Z300-60x42

Alder, Cherry

Hard Maple

Red Oak


22-1/4"

12"

the cabinet · pdf filemoulding designs, while commonly ... the cabinet authority ... the top...

Documents