The Avanti One-Liter BottleYour capacity will never be the same.

FL-16765B

4

6

12

3

5

Higher temperaturesOffers an increased maximum operating temperature of 40° C.

Higher speedsAchieves 8,000 rpm in the 8.1000 rotor, and 9,000 rpm in the 9.1000 rotor.

Improved chemical resistance New polypropylene AutoVent plug and polyphenylene sulfide cap provide greater chemical resistance.

Easy handlingWith a diameter of 76 millimeters, the mouth of this bottle allows easy access for removing pellets and cleaning. The cap handle and carrier simplify transport, and the cap is easily tightened with no torque requirement.

Patented HarvestLine System linersDisposable liners provide easy-to-use, low-cost sample containment, and are compatible with commonly used chemicals and solvents.

Improved BioSafety*

A protective O-ring provides better containment. Head space on the top of the bottle also helps prevent leakage.

1

2

3

4

5

6

ITS POTENTIAL CANNOT BE CONTAINED.

The new Avanti 1L polypropylene bottle builds upon the versatility of the Avanti Series of centrifuges to help you gain even more control of your workflow. The only 1L polypropylene bottle tested and approved for use with Avanti instruments, the Avanti 1L polypropylene bottle provides increased speed, operating temperatures, BioSafety,* and chemical resistance. And thanks to convenient features like a cap handle, the new bottle is even easier to work with—so that nothing slows down your discovery process.

AVANTI ONE-LITER BOTTLES & HARVESTLINE SYSTEM LINERS

DescriptionNominal Volume

(mL)

Nominal Size (mm)

Open Mouth Tube Diameter

(mm)

Spin Temperature† Part No. Rotors

Polypropylene Bottle Assembly with Polyphenylsufone Cap‡ 1000 95x191 76 2° C to 40° C A98813 JLA-8.1000 & JLA-9.1000

Polypropylene Bottle Assembly with Polyphenylene Sulfide Cap‡ 1000 95x191 76 2° C to 40° C B29896 JLA-8.1000 & JLA-9.1000

Polypropylene Bottles (set of 2) 1000 95x191 76 2° C to 40° C A98814 JLA-8.1000 & JLA-9.1000

One-Liter Bottles Are Also Available In Polycarbonate Material

Polycarbonate Bottle Assembly‡ 1000 95x191 76 2° C to 25° C A98812 JLA-8.1000 & JLA-9.1000

Polycarbonate Bottles (set of 2) 1000 95x191 76 2° C to 25° C 366751 JLA-8.1000 & JLA-9.1000

HarvestLine System Liners

HarvestLine System Liners (120 qty) 1000 — — — 369256 JLA-8.1000 & JLA-9.1000

HarvestLine System Liner Kit§ 1000 — — — 369264 JLA-8.1000 & JLA-9.1000

* BioSafe and BioSafety are terms intended to describe the enhanced biocontainment features of our products.†When working at temperatures outside these ranges, bottles should be tested under simulated conditions prior to run.‡ Bottle Assemblies include: Two bottles, two cap/closures, two AutoVent polypropylene plugs with O-rings, two additional large plug O-rings, two additional AutoVent plug O-rings.

§HarvestLine System Liner Kit includes: 120 Liners, Filling Rack, Funnel, and Instructional CD.

For Beckman Coulter’s worldwide office locations and phone numbers, please visit www.beckmancoulter.com/contact B2013-14262 FL-16765B www.beckmancoulter.com © 2013 Beckman Coulter, Inc. PRINTED IN U.S.A.

Beckman Coulter, the stylized logo, Avanti and HarvestLine are trademarks of Beckman Coulter, Inc. and are registered with the USPTO.