the atm simulator 2 atmirage. the atm simulator self service machines simulator: atm, receipt...
TRANSCRIPT
Th
e AT
M s
imu
lator
2
ATMirage. The ATM Simulator
Self Service Machines Simulator: ATM, Receipt payment, Passbook updaters, kiosks, etc.
can simulate every ATM device and their different responses.
The ATM application runs in a different Virtual Machine or its own PC.
SO independent
Th
e AT
M s
imu
lator
3
Available drivers for the most important standards on the market:
CEN/XFS
J/XFS
Xpeak
Also possible adaptation to proprietaries interfaces.
Screen Hook sends the application screen output to the screen simulator.
Clicks and double clicks are detected on the screen simulator to simulate touchable screens.
Application interaction
Th
e AT
M s
imu
lator
4
Create your own ATM
Devices Included
Magnetic Stripe and Chip cards reader/recorder
Notes dispenser Coins dispenser Envelopes dispenser Envelopes depository Notes acceptor Coins acceptor Receipt printer Journal printer Document printer Passbook printer Pin Pad Barcode reader Check reader Operator panel (TTU) Alarm Sensors and indicators
Th
e AT
M s
imu
lator
5
Personalize your ATM
offers the possibility of designing different models of ATMs with different devices.
Create your own ATM models specifying the devices, their location, their appearance and their features.
Change the look and feel of your ATM, and add your own decorations and logos.
Test your ATM application with different models of ATMs previously created.
Th
e AT
M s
imu
lator
6
Configure all devices
Set your devices capabilities to simulate your real devices.
With , different models of every kind of devices can be created. For instance, readers that record 3 tracks, readers that record tracks 1 and 2, readers with or without chip, graphical or onlytext printers, etc.
Th
e AT
M s
imu
lator
7
Develop, test and debug your ATM application.
With no physical ATM is needed. simplifies and speeds up your ATM application tests.
Run your ATM application
Th
e AT
M s
imu
lator
8
Set the devices statuses
allows to configure the devices statuses and behaviour according to your needs during execution.
For instance, you can set the denominations of the notes dispenser, the amount of each cassette, and save and set the current status during execution.
Th
e AT
M s
imu
lator
9
Set the devices behaviour
allows to set the runtime behaviour of the devices.
For instance, you can set how many notes are rejected in the next dispense operation, or the behaviour of each cassette to simulate a jam or a malfunction during the withdrawal.
Th
e AT
M s
imu
lator
10
With you can set not only the states of your devices, but also the states of your medias.
For instance, you can edit the magnetic stripe of your passbooks, and edit the content of each page of each passbook.
Set your medias states
Th
e AT
M s
imu
lator
11
simulates the receipts created during run time.
Generate run time receipts
Th
e AT
M s
imu
lator
12
Automate your tests
Record macros of your executions and execute them automatically.
Edit, mix and manipulate the steps of your macros.
Th
e AT
M s
imu
lator
13
Create test batteries.
Create test batteries with your macros. Execute them and validate the results.
Record your results and generate reports. Keep control of the current status of each battery in every moment.
Th
e AT
M s
imu
lator
14
Validate your tests automatically
Take screen shots to validate your batteries automatically basing its results on the screen output of your ATM application.
Th
e AT
M s
imu
lator
15
includes a EMV-Level 2 simulator based on VISA and Master Card specifications.
Also, optionally, can be connected to a chip card physical reader, in order to make tests with real smartcards.
EMV Simulation
Th
e AT
M s
imu
lator
16
can be used to simulate every type of self service machines. For instance, receipt payment devices, passbook updaters, tickets dispensers, parking tickets kiosks, cinema automated devices…
Simulate any automatic machine
Th
e AT
M s
imu
lator
17
Application exection without hardware. Applications approval, tests, development or debug. Operative System independent. Devices connectivity independent (CEN/XFS, J/XFS, Xpeak, DLLs or proprietaries
interfaces). Complete simulation of EMV-Level 2. Error testing in easy and fast way. Test automation. Test batteries and test reports generation.
Conclusions