the 8th east asia mechanical and aerospace … east asia mae workshop program.pdf · 1 preface on...

Workshop Organizer

Department of Mechanical Engineering, The Hong Kong Polytechnic University

Dec 1-3, 2018Hong Kong SAR, China

The 8th EAST ASIA MECHANICAL AND AEROSPACE ENGINEERING WORKSHOP

1

Preface

On behalf of the Organizing committee and the Department of Mechanical Engineering of the Hong Kong

Polytechnic University, I would like to extend a warm welcome to all participants of the 8th East Asia

Mechanical and Aerospace Engineering Workshop.

This workshop series has been successfully held in the previous seven years, involving the four top-notch

universities in the East Asia region from Korea, Taiwan, Japan and Hong Kong respectively. In an effort to

enhance collaborations with sister institutions in the East-Asia area, the Department of Mechanical

Engineering (ME) of the Hong Kong Polytechnic University (HKPolyU) joined this prestigious alliance

five years ago by participating in the 3rd workshop in Hokkaido University in Japan in 2013. In the following

year, the 4th East Asia Mechanical and Aerospace Engineering Workshop was successfully held in Hong

Kong. Now, this event has become part of the efforts that we are making to cope with the increasing demand

for mechanical engineers, a discipline which is regarded as the backbone of the Engineering in the modern

society. Meanwhile, it is in line with the continuous effort that the ME department and HK PolyU has been

making in developing expertise and academic programmes in the field of Aerospace Engineering and

related areas.

I am confident that this workshop will provide an ideal platform not only for academics from the four

universities to exchange ideas and views, but also for research students to mingle together and exchange

their learning and research experiences. Meanwhile, discussions are also expected among four participating

departments to continue the facilitating of student exchange programs in the near future.

We wish to thank all the authors who have contributed papers to this workshop, as well as student helpers

from the ME department of HK PolyU who make this event successful. We also appreciate the sponsorship

and support from the ME Department and the Hong Kong Polytechnic University for providing financial

support to this event.

San-Qiang Shi

Chairman of the organizing committee

Chair Professor of Mechanical Engineering

Department of Mechanical Engineering

The Hong Kong Polytechnic University

2

The 8th East Asia Mechanical and Aerospace Engineering Workshop

Date: 1 - 3 December 2018

Venue: The Hong Kong Polytechnic University, Hong Kong

Participating Universities:

Hokkaido University

Korea University

National Cheng Kung University


Organizer:

Department of Mechanical Engineering, The Hong Kong Polytechnic University

Sponsor:


Website:

http://www.polyu.edu.hk/me/eamaew/

http://www.polyu.edu.hk/me/eamaew/

3

Program Overview

Date Time Event Venue

1 Dec 2018

13:30 – 14:00 Registration Outside Y302

14:00 – 14:30 Opening ceremony + Photo taken

Y302

14:30 – 15:00 Keynote Lecture 1: Vehicle catching fire, mysterious or defective

(Prof. Simsoo Park, Korea University, Abstract #63)

15:00 – 15:30 Keynote Lecture 2: Biomechanical study on bone tissue as mineral/organic composite

(Prof. Masahiro Todoh, Hokkaido University, Abstract #75)

15:30 – 16:00

Keynote Lecture 3: A possible solution for UAVs flight control under IMU failure and GPS denied

situations

(Prof. Chao-Chung Peng, National Cheng Kung University, Abstract #40)

16:00 – 16:30 Tea break Outside Y302

16:30 – 17:00 Keynote Lecture 4: Novel nanofiber technologies for energy and environment

(Prof. Wallace Leung, The Hong Kong Polytechnic University, Abstract #8)

Y302

17:00 – 17:30 Keynote Lecture 5: CO2 Absorption/regeneration performance enhancement by nanoabsorbents

(Prof. Yong-Tae Kang, Korea University, Abstract #67)

17:30 – 18:00

Keynote Lecture 6: Investigating the effects of aortic dissection through 3D CT image

segmentation and CFD

(Prof. Ryo Takeda, Hokkaido University, Abstract #74)

18:00 – 18:15

International collaboration research in structural integrity assessment of

nuclear components

(Prof. Yun-Jae Kim, Korea University, Abstract #57)

18:30 – 20:30 Dinner at Theatre Lounge, PolyU

2 Dec 2018

9:30 – 10:00

Keynote Lecture 7: Multiphase microfluidics for encapsulation of porous and dual-drug released

PLGA microparticles

(Prof. Szu-I Yeh, National Cheng Kung University, Abstract #41) Y304

10:00 – 10:30 Keynote Lecture 8: Acoustic metasurface

(Prof. Jie Zhu, The Hong Kong Polytechnic University, Abstract #7)

10:30 – 11:00 Tea break Outside BC202

11:00 – 13:00 General sessions 1a, 1b, 1c BC201, BC202,

BC203

13:00 – 14:30 Lunch at V Cuisine (彩晶軒) in Harbour Crystal Centre (港晶中心)

14:30 – 16:15 General sessions 2a, 2b, 2c Panel discussion on student exchange and

faculty collaboration (venue to be determined)

BC201, BC202,

BC203

16:15 – 16:30 Tea break Outside BC202

16:30 – 18:30 General sessions 3a, 3b, 3c BC201, BC202,

BC203

19:00 – 21:00 Banquet at Choi Fook Royal Banquet (彩福) in Fortune Metropolis (置富都會)

3 Dec 2018 9:00 – 17:00 Day trip to Wanchai, the Peak, CWB, Stanley

4

Keynote Lectures

(Date: 1 Dec 2018, Venue: Y302)

Time Speaker Title Institute Abstract # Chairman

14:30-15:00 Simsoo Park Vehicle catching fire, mysterious or defective KU 63

Chih-Yung Wen

(PolyU)

15:00-15:30 Masahiro Todoh Biomechanical study on bone tissue as mineral/organic composite HU 75

15:30-16:00 Chao-Chung Peng A possible solution for UAVs flight control under IMU failure and

GPS denied situations NCKU 40

16:30-17:00 Wallace Leung Novel nanofiber technologies for energy and environment PolyU 8

Jiun-Jih Miau

(NCKU)

17:00-17:30 Yong-Tae Kang CO2 Absorption/regeneration performance enhancement by

nanoabsorbents KU 67

17:30-18:00 Ryo Takeda Investigating the effects of aortic dissection through 3D CT image

segmentation and CFD HU 74

(Date: 2 Dec 2018, Venue: Y304)

Time Speaker Title Institute Abstract # Chairman

9:30-10:00 Szu-I Yeh Multiphase microfluidics for encapsulation of porous and dual-

drug released PLGA microparticles NCKU 41 Hoseong Lee

(KU) 10:00-10:30 Jie Zhu Acoustic metasurface PolyU 7

Note: Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php

http://www.polyu.edu.hk/me/eamaew/abstract.php

5

Session 1a – Materials and Solid Mechanics (Date: 2 Dec 2018, Venue: BC201)

Time Author Title Institute Abstract # Chairman

11:00-11:15

Chen Lin,

Haihui Ruan,

San-Qiang Shi

Phase field modelling of pitting corrosion under mechanical

deformation PolyU 26

Liang An

(PolyU)

Masahiro Todoh

(HU)

11:15-11:30 Jyun-Kai Huang,

Wen-Bin Young Study on continuous bamboo fiber reinforced epoxy composites NCKU 44

11:30-11:45

Yoonjung Kim,

Myeongsang Lee,

Inchul Baek,

Taeyoung Yoon,

Sungsoo Na

Superior silk fibers from mechanically inferior constituents by

adapting to varying hydration conditions KU 54

11:45-12:00 Osamu Fujita Research on solid material flammability in microgravity by

utilizing KIBO in ISS HU 71

12:00-12:15

Guangzhe Li,

Bin Huang,

Zhefei Pan,

Xiangyu Su,

Liang An

Enhancing sodium ion storage properties of carbon sheets by

generating porous structures on carbon surface PolyU 32

12:15-12:30 Yu-Hui Yang,

Wen-Bin Young

A study on out of autoclave process for composites consolidated

with carbon fiber reinforced prepregs and dry fibers NCKU 45

12:30-12:45 Jung-Wook Wee,

Byoung-Ho Choi

Application of crack layer growth of HDPE under fatigue loading

with various R-ratios KU 61

12:45-13:00

Junmo Koo,

Sangmin Lee,

Taek-Soo Kim,

Joon Hyung Shim

Tensile test of ALD Al2O3 thin film on water surface KU 69

Note: The presenters are underlined. Abstracts can be found online through this link: http://www.polyu.edu.hk/me/eamaew/abstract.php

Session 1b – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC202)


11:00-11:15 Shakeel Ahmad,

Hui Tang Flow past tandem cylinders with super-hydrophobic surfaces PolyU 2

Yong Tae Kang

(KU)

Hui Tang

(PolyU)

11:15-11:30 Chin-Hsiang Cheng Development in Stirling Cryocoolers in National Cheng Kung

University NCKU 47

11:30-11:45

Yujun Jung,

Joonbyum Kim,

Hoseong Lee

Residential and commercial building energy analysis with micro-

CHP systems KU 59

11:45-12:00 Yikai Li,

Peng Zhang

Linear analysis on the interfacial instability of a spherical liquid

droplet subject to a radial vibration BIT 76

12:00-12:15 Wallace Leung Scale-up on mixing in rotating microchannel under subcritical and

supercritical operating modes PolyU 9

12:15-12:30

Cheng-Han Lin,

Wei-Cheng Wang,

Xiang-Xin Chen,

Yu-Zhen Lin

The production of renewable jet fuel through glyceride-based oils NCKU 42

12:30-12:45

Wonhyeok Lee,

Seonggon Kim,

Ronghuan Xu,

Development of nanoemulsion absorbents for CO2 absorption KU 56

12:45-13:00


BIT – Beijing Institute of Technology



6

Session 1c – Control, Acoustics and Dynamics (Date: 2 Dec 2018, Venue: BC203)


11:00-11:15

Sai Hu,

Weisong Wen,

Yin-Chiu Kan,

Li-Ta Hsu

Low-speed autonomous vehicle for campus delivery application PolyU 1

Li-Ta Hsu

(PolyU)

Sungsoo Na

(KU)

11:15-11:30

Chanhoo Park,

Jimin Kang,

Kuehwan Jang,

Sungsoo Na

Highly sensitive detection of KRAS using mismatch specific

protein and resonator KU 53

11:30-11:45

Ankit A. Ravankar,

Abhijeet Ravankar,

Yukinori

Kobayashi,

Takanori Emaru

A collaborative mapping and navigation framework for multi-

robot system HU 73

11:45-12:00

Yanfeng Xu,

Zhongqing Su,

Wenxiang Hu

Notch localization using the converted Lamb wave based on

compensation technique PolyU 23

12:00-12:15

M. Muddassir,

D. Navarro-

Alarcon,

O. Zahra,

M. Victorova,

M. WanYu

Sensor-guided skin photo-rejuvenation robotic system PolyU 28

12:15-12:30

Ruqi Sun,

Wai On Wong,

Li Cheng

Design analysis of a rotational and a translational tunable vibration

dampers PolyU 34

12:30-12:45

A. Mehmood,

I. Arif,

N. Hussain

Analysis of an aircraft in single horizontal tail failure emergency

and estimation of counter measures for safe landing PolyU 35

12:45-13:00

Racer K.H. Lam,

Leo M.T. Ng,

Garret C.Y. Lam,

Randolph C.K.

Leung

Experimental study of acoustic metamaterial silencer technology

for air ventilation duct PolyU 39



7

Session 2a – Materials and Solid Mechanics (Date: 2 Dec 2018, Venue: BC201)


14:30-14:45 Talha Q. Ansari,

San-Qiang Shi

Multi-phase field model of localized corrosion kinetics with

corrosion products formation PolyU 27

Haihui Ruan

(PolyU)

Wen-Bin Young

(NCKU)

14:45-15:00 Hsuan-Hao Chiu,

Wen-Bin Young

Measurement of tensile strength and modulus for continuous

bamboo fiber reinforced composites NCKU 43

15:00-15:15 Inchul Baek,

Sungsoo Na

Protein redesign for enzymatic nano device through moledular

dynamics KU 55

15:15-15:30

Wang Jianbiao,

Wang Xu,

Ruan Haihui,

Zhou Siyang

The spitted frequency of beam vibration and the corresponding

Young’s modulus in the high temperature IET experiments PolyU 37

15:30-15:45

Chin-Hsiang

Cheng,

Chun-Kai Chang

Properties improvement by fiber laser treating for HVOF WC/Co

coating NCKU 48

15:45-16:00 Min-Seok Choi,

Byoung-Ho Choi

Effect of carbon nanotube (CNT) content on the mechanical and

fracture properties of PETG/CNT nanocomposite films KU 64

16:00-16:15

Gwon Deok Han,

Minsik Kim,

Junmo Koo,

Joon Hyung Shim

Fabrication of composite cathodes for solid oxide fuel cells using

inkjet printing KU 70




14:30-14:45 Feng Ren,

Hui Tang

Machine learning control of vortex-induced vibration of a circular

cylinder PolyU 3

Byoung-Ho Choi

(KU)

Xinyan Huang

(PolyU)

14:45-15:00 Jiun-Jih Miau Flow visualization near a contoured body surface NCKU 51

15:00-15:15 Byoung-Ho Choi Observation and modelling of tear and dart characteristics of

polyethylene blown films KU 66

15:15-15:30 Xinyan Huang Dripping phenomena in fire: Critical drip size and blue flame

shedding PolyU 12

15:30-15:45 Po-Hsiung Huang,

Keh-Chin Chang

Analysis of fluctuating velocity in turbulent near wake behind

circular cylinder NCKU 46

15:45-16:00

Yujun Jung,

Joonbyum Kim,

Hoseong Lee

Energy, environmental, economic evaluation of geothermal

assisted commercial building using CCHP KU 58

16:00-16:15

Yicheng Chi,

Qinghui Meng,

Lidong Zhang,

Peng Zhang

Towards high-level theoretical studies of aviation kerosene

molecules: An ONIOM[QCISD(T)/CBS:DFT] study on hydrogen

abstraction reactions of large straight-chain alkanes molecules

CnH2n+2 + (H, OH, HO2) radicals

PolyU 14




8

Session 2c – Control, Acoustics and Dynamics + Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC203)


14:30-14:45

Guohao Zhang,

Haosheng Xu,

Li-Ta Hsu

3D mapping aided GNSS positioning for smartphone users in

highly urbanized cities PolyU 10

Chao-Chung Peng

(NCKU)

Ankit A. Ravankar

(HU)

14:45-15:00

Weisong Wen,

Xiwei Bai,

Li-Ta Hsu

Multi-sensor integration-based localization for autonomous vehicle

in urbanized area PolyU 77

15:00-15:15

Su Wang,

Ankit A. Ravankar,

Abhijeet Ravanka,

Yukinori

Kobayashi,

Takanori Emaru

Scale-aware indoor localization using 2D laser rangefinder in a

weak map from monocular SLAM HU 72

15:15-15:30

Weifeng Zhou,

Boyang Li,

Jingxuan Sun,

Chinh-yung Wen

Controlling of an autonomous tail-sitter take-off and landing

unmanned aerial vehicles by adaptive model predictive control PolyU 25

15:30-15:45

Yafeng Wang,

Zhihua Xiao,

Sanqiang Shi

Study of gas bubble behavior for high burnup nuclear fuels using

the phase field methodology PolyU 18

15:45-16:00

Ken Chunkit Uy,

Lisong Shi,

Chihyung Wen

Chemical-vibrational coupling effect in detonation stability PolyU 20

16:00-16:15

E Fan,

Jiaao Hao,

Ben Guan,

Chin-Yung Wen

Influence of combustion on the shock pattern and interface

evolution in shock wave-heavy bubble interaction PolyU 24



9

Session 3a – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC201)


16:30-16:45

Fuwang Zhao,

M. N. Mumtaz

Qadri,

Hui Tang

Modelling of a bio-inspired flow energy harvester PolyU 4

Joon Hyung Shim

(KU)

Yang Liu

(PolyU)

16:45-17:00 Chih-Yuan Weng,

Tzong-Shyng Leu

Design of loop heat pipes with two-phase flow pattern based

modeling NCKU 52

17:00-17:15 Joon Hyung Shim Ceramic fuel cell power plants KU 68

17:15-17:30 X. L. Yang,

Y. Liu

An improved k-ω-φ-α turbulence model applied to near-wall,

separated and impinging jet flows and heat transfer PolyU 36

17:30-17:45

Chin-Hsiang

Cheng,

Yi-Jia Chen,

Kun-Chia Hsieh,

Yu-Ting Lin

Numerical simulation of linear alternator integrated with free-

piston Stirling Engine NCKU 49

17:45-18:00

Jinwoo Oh,

Ukmin Han,

Hoseong Lee

Numerical study of the application of organic Rankine cycle in

cascade heat utilization district heating and cooling KU 60

18:00-18:15 Zhenyu Zhang,

Peng Zhang

A practical pressure-dependent droplet collision model for

Lagrangian simulation of impinging sprays under high ambient

pressures

PolyU 15

18:15-18:30

Chengming He,

Xi Xia,

Peng Zhang

Viscous dissipation of bouncing droplets undergoing off-center

collision PolyU 19




2 December

16:30-16:45

Zhaokun Wang,

Chenglei Wang,

Hui Tang

Simulation of fluid-structure interaction during

phacoemulsification-based cataract surgery PolyU 5

Simsoo Park

(KU)

Szu-I Yeh

(NCKU)

16:45-17:00

Shaorun Lin,

Peiyi Sun,

Xinyan Huang

Three-stage combustion of peat under external radiation PolyU 11

17:00-17:15 Wei-Han Chen,

Szu-I Yeh

Development and kinematic analysis of a passerine-inspired

flapping wing robot for aerodynamic quantification NCKU 50

17:15-17:30

Sungha Baek,

Jaeho Cho,

Seungho Ahn,

Cha-Lee Myung,

Simsoo Park

Impact of a downsized LPG direct injection vehicle on CO2 and

nano-particle emission reduction potential compared to a gasoline

direct injection vehicle

KU 62

17:30-17:45

Yu Liang,

Lili Liu,

Ben Guan,

Chih-Yung Wen

The evolution of an air/SF6/air fluid layer impacted by shock wave PolyU 16

17:45-18:00 Long Tiehan,

Chih-Yung Wen

Instability modes in high-speed boundary layer with ultrasonically

absorptive coating: A new theory and dynamic mode

decomposition

PolyU 21

18:00-18:15

Xudong Tian,

Tiehan Long,

Rui Zhao,

Chih-yung Wen

Design of ultrasonic absorptive coating for the stabilization of

Mack modes in a high-speed boundary layer PolyU 29

18:15-18:30

Z.F. Pan,

Y.D. Bi,

X.Y. Su,

G.Z. Li,

L. An

Mathematical modelling of hybrid direct ethylene glycol fuel cells

with hydrogen peroxide as oxidant PolyU 31




10

Session 3c – Thermofluids and Combustion (Date: 2 Dec 2018, Venue: BC203)


16:30-16:45 Chong Wei,

Hui Tang

Effects of owl-inspired leading-edge serrations on sound

suppression and aerodynamic performance PolyU 6

Ryo Takeda

(HU)

Peng Zhang

(PolyU)

16:45-17:00 Xi Xia,

Peng Zhang Vortex sheet formation of flickering buoyant diffusion flames PolyU 13

17:00-17:15 Sung Jin You,

Jin Taek Chung

Numerical study of the aspect ratio effect on the film cooling

effectiveness KU 65

17:15-17:30

Lili Liu,

Yu Liang,

Ben Guan,

Chih-Yung Wen

Richtmyer-Meshkov instability on dual-mode interface impacted

by planar shock wave PolyU 17

17:30-17:45

Ben Guan,

E Fan,

Chih-Yung Wen

Numerical study on the shock convergence induced jet formation

of heavy gas inhomogeneities PolyU 22

17:45-18:00

Lisong Shi,

Ken Chunkit Uy,

and Chihyung Wen

Lisong Shi1, Ken Chunkit Uy2, and Chihyung Wen3 PolyU 30

18:00-18:15 Hao Zhang,

Chih-Yung Wen

Three-dimensional numerical investigation on the performance

degradation of a Pitot-static system caused by in-flight ice

accretion

PolyU 33

18:15-18:30

Xiangyu Su,

Zhefei Pan,

Yanding Bi,

Guangzhe Li,

Bin Huang,

Liang An

Performance of a passive formate fuel cell PolyU 38



the 8th east asia mechanical and aerospace … east asia mae workshop program.pdf · 1 preface on...

Documents